Attachment 91024 Details for Bug 72905 – dmesg with dpm enabled

dmesg with dpm enabled

dmesg2 (text/plain), 48.91 KB, created by Thierry Vignaud on 2013-12-20 09:08:30 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Thierry Vignaud

Created: 2013-12-20 09:08:30 UTC

Size: 48.91 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Initializing cgroup subsys cpu
>Initializing cgroup subsys cpuacct
>Linux version 3.12.5-desktop-1.mga4 (iurt@sucuk.mageia.org) (gcc version 4.8.2 (GCC) ) #1 SMP Sun Dec 15 00:30:51 UTC 2013
>Command line: BOOT_IMAGE=Mageia_Linux,_avec_Linux_deskto root=UUID=844ab078-1d9a-447d-bd92-c5219b9ab5d2 ro splash quiet radeon.modeset=1 radeon.dynclks=1 radeon.dpm=0 reboot=acpi resume=UUID=bca0e8f4-6b4c-47e7-a180-5692370ef735 radeon.dpm=1
>e820: BIOS-provided physical RAM map:
>BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
>BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
>BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
>BIOS-e820: [mem 0x0000000000100000-0x00000000cffbffff] usable
>BIOS-e820: [mem 0x00000000cffc0000-0x00000000cffcdfff] ACPI data
>BIOS-e820: [mem 0x00000000cffce000-0x00000000cfffffff] ACPI NVS
>BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
>BIOS-e820: [mem 0x00000000ffb80000-0x00000000ffffffff] reserved
>NX (Execute Disable) protection: active
>SMBIOS 2.3 present.
>DMI: NEC Computers SAS ECS-945G/ECS-945G, BIOS 080013  02/25/2008
>e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
>e820: remove [mem 0x000a0000-0x000fffff] usable
>No AGP bridge found
>e820: last_pfn = 0xcffc0 max_arch_pfn = 0x400000000
>MTRR default type: uncachable
>MTRR fixed ranges enabled:
>  00000-9FFFF write-back
>  A0000-DFFFF uncachable
>  E0000-EFFFF write-through
>  F0000-FFFFF write-protect
>MTRR variable ranges enabled:
>  0 base 000000000 mask F80000000 write-back
>  1 base 080000000 mask FC0000000 write-back
>  2 base 0C0000000 mask FF0000000 write-back
>  3 disabled
>  4 disabled
>  5 disabled
>  6 disabled
>  7 disabled
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
>Base memory trampoline at [ffff880000099000] 99000 size 24576
>init_memory_mapping: [mem 0x00000000-0x000fffff]
> [mem 0x00000000-0x000fffff] page 4k
>BRK [0x01efa000, 0x01efafff] PGTABLE
>BRK [0x01efb000, 0x01efbfff] PGTABLE
>BRK [0x01efc000, 0x01efcfff] PGTABLE
>init_memory_mapping: [mem 0xcfc00000-0xcfdfffff]
> [mem 0xcfc00000-0xcfdfffff] page 2M
>BRK [0x01efd000, 0x01efdfff] PGTABLE
>init_memory_mapping: [mem 0xcc000000-0xcfbfffff]
> [mem 0xcc000000-0xcfbfffff] page 2M
>init_memory_mapping: [mem 0x80000000-0xcbffffff]
> [mem 0x80000000-0xcbffffff] page 2M
>BRK [0x01efe000, 0x01efefff] PGTABLE
>init_memory_mapping: [mem 0x00100000-0x7fffffff]
> [mem 0x00100000-0x001fffff] page 4k
> [mem 0x00200000-0x7fffffff] page 2M
>init_memory_mapping: [mem 0xcfe00000-0xcffbffff]
> [mem 0xcfe00000-0xcffbffff] page 4k
>BRK [0x01eff000, 0x01efffff] PGTABLE
>RAMDISK: [mem 0x3757f000-0x37feffff]
>ACPI: RSDP 00000000000f8080 00014 (v00 ACPIAM)
>ACPI: RSDT 00000000cffc0000 00040 (v01 NECC_S NECC_SAS 02000825 MSFT 00000097)
>ACPI: FACP 00000000cffc0200 00084 (v02 NECC_S  OEMFACP 02000825 MSFT 00000097)
>ACPI: DSDT 00000000cffc05c0 05415 (v01  945G0 945G0225 00000225 INTL 02002026)
>ACPI: FACS 00000000cffce000 00040
>ACPI: APIC 00000000cffc0390 0006C (v01 NECC_S OEMAPIC  02000825 MSFT 00000097)
>ACPI: MCFG 00000000cffc0400 0003C (v01 NECC_S OEMMCFG  02000825 MSFT 00000097)
>ACPI: SLIC 00000000cffc0440 00176 (v01 NECC_S NECC_SAS 02000825 MSFT 00000097)
>ACPI: OEMB 00000000cffce040 00056 (v01 NECC_S AMI_OEM  02000825 MSFT 00000097)
>ACPI: HPET 00000000cffc59e0 00038 (v01 NECC_S OEMHPET  02000825 MSFT 00000097)
>ACPI: SSDT 00000000cffce9c0 0082F (v01 DpgPmm    CpuPm 00000012 INTL 20051117)
>ACPI: Local APIC address 0xfee00000
>No NUMA configuration found
>Faking a node at [mem 0x0000000000000000-0x00000000cffbffff]
>Initmem setup node 0 [mem 0x00000000-0xcffbffff]
>  NODE_DATA [mem 0xcffbb000-0xcffbffff]
> [ffffea0000000000-ffffea00033fffff] PMD -> [ffff8800cc000000-ffff8800cf3fffff] on node 0
>Zone ranges:
>  DMA      [mem 0x00001000-0x00ffffff]
>  DMA32    [mem 0x01000000-0xffffffff]
>  Normal   empty
>Movable zone start for each node
>Early memory node ranges
>  node   0: [mem 0x00001000-0x0009efff]
>  node   0: [mem 0x00100000-0xcffbffff]
>On node 0 totalpages: 851806
>  DMA zone: 64 pages used for memmap
>  DMA zone: 21 pages reserved
>  DMA zone: 3998 pages, LIFO batch:0
>  DMA32 zone: 13247 pages used for memmap
>  DMA32 zone: 847808 pages, LIFO batch:31
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Using ACPI (MADT) for SMP configuration information
>ACPI: HPET id: 0xffffffff base: 0xfed00000
>smpboot: Allowing 4 CPUs, 2 hotplug CPUs
>nr_irqs_gsi: 40
>PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
>PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
>PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
>e820: [mem 0xd0000000-0xfedfffff] available for PCI devices
>Booting paravirtualized kernel on bare hardware
>setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
>PERCPU: Embedded 28 pages/cpu @ffff8800cfa00000 s84800 r8192 d21696 u524288
>pcpu-alloc: s84800 r8192 d21696 u524288 alloc=1*2097152
>pcpu-alloc: [0] 0 1 2 3 
>Built 1 zonelists in Node order, mobility grouping on.  Total pages: 838474
>Policy zone: DMA32
>Kernel command line: BOOT_IMAGE=Mageia_Linux,_avec_Linux_deskto root=UUID=844ab078-1d9a-447d-bd92-c5219b9ab5d2 ro splash quiet radeon.modeset=1 radeon.dynclks=1 radeon.dpm=0 reboot=acpi resume=UUID=bca0e8f4-6b4c-47e7-a180-5692370ef735 radeon.dpm=1
>PID hash table entries: 4096 (order: 3, 32768 bytes)
>Checking aperture...
>No AGP bridge found
>Calgary: detecting Calgary via BIOS EBDA area
>Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>Memory: 3327124K/3407224K available (6286K kernel code, 870K rwdata, 3024K rodata, 1228K init, 912K bss, 80100K reserved)
>SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
>Hierarchical RCU implementation.
>	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
>NR_IRQS:4352 nr_irqs:712 16
>Console: colour VGA+ 80x25
>console [tty0] enabled
>hpet clockevent registered
>tsc: Fast TSC calibration using PIT
>tsc: Detected 1995.173 MHz processor
>Calibrating delay loop (skipped), value calculated using timer frequency.. 3990.34 BogoMIPS (lpj=1995173)
>pid_max: default: 32768 minimum: 301
>Security Framework initialized
>TOMOYO Linux initialized
>Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
>Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Mount-cache hash table entries: 256
>Initializing cgroup subsys devices
>Initializing cgroup subsys freezer
>Initializing cgroup subsys net_cls
>Initializing cgroup subsys blkio
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>mce: CPU supports 6 MCE banks
>CPU0: Thermal monitoring enabled (TM2)
>Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
>Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
>tlb_flushall_shift: -1
>Freeing SMP alternatives memory: 24K (ffffffff81e0e000 - ffffffff81e14000)
>ACPI: Core revision 20130725
>ACPI: All ACPI Tables successfully acquired
>ftrace: allocating 23493 entries in 92 pages
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>smpboot: CPU0: Intel(R) Pentium(R) Dual  CPU  E2180  @ 2.00GHz (fam: 06, model: 0f, stepping: 0d)
>Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
>perf_event_intel: PEBS disabled due to CPU errata
>... version:                2
>... bit width:              40
>... generic registers:      2
>... value mask:             000000ffffffffff
>... max period:             000000007fffffff
>... fixed-purpose events:   3
>... event mask:             0000000700000003
>smpboot: Booting Node   0, Processors  #   1 OK
>Brought up 2 CPUs
>smpboot: Total of 2 processors activated (7980.69 BogoMIPS)
>devtmpfs: initialized
>PM: Registering ACPI NVS region [mem 0xcffce000-0xcfffffff] (204800 bytes)
>xor: measuring software checksum speed
>   prefetch64-sse:  8052.000 MB/sec
>   generic_sse:  7128.000 MB/sec
>xor: using function: prefetch64-sse (8052.000 MB/sec)
>pinctrl core: initialized pinctrl subsystem
>RTC time:  9:49:36, date: 12/20/13
>NET: Registered protocol family 16
>cpuidle: using governor ladder
>cpuidle: using governor menu
>ACPI: bus type PCI registered
>acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
>PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
>PCI: Intel Corporation 945G/GZ/P/PL Express Memory Controller Hub with MMCONFIG support
>PCI: not using MMCONFIG
>PCI: Using configuration type 1 for base access
>mtrr: your CPUs had inconsistent fixed MTRR settings
>mtrr: probably your BIOS does not setup all CPUs.
>mtrr: corrected configuration.
>bio: create slab <bio-0> at 0
>raid6: sse2x1    3312 MB/s
>raid6: sse2x2    3523 MB/s
>raid6: sse2x4    5945 MB/s
>raid6: using algorithm sse2x4 (5945 MB/s)
>raid6: using ssse3x2 recovery algorithm
>ACPI: Added _OSI(Module Device)
>ACPI: Added _OSI(Processor Device)
>ACPI: Added _OSI(3.0 _SCP Extensions)
>ACPI: Added _OSI(Processor Aggregator Device)
>ACPI: EC: Look up EC in DSDT
>ACPI: Executed 1 blocks of module-level executable AML code
>ACPI: SSDT 00000000cffce0a0 00235 (v01 DpgPmm  P001Ist 00000011 INTL 20051117)
>ACPI: Dynamic OEM Table Load:
>ACPI: SSDT           (null) 00235 (v01 DpgPmm  P001Ist 00000011 INTL 20051117)
>ACPI: SSDT 00000000cffce530 00235 (v01 DpgPmm  P002Ist 00000012 INTL 20051117)
>ACPI: Dynamic OEM Table Load:
>ACPI: SSDT           (null) 00235 (v01 DpgPmm  P002Ist 00000012 INTL 20051117)
>ACPI: Interpreter enabled
>ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130725/hwxface-571)
>ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130725/hwxface-571)
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>ACPI: No dock devices found.
>ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
>acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
>acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
>acpi PNP0A08:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
>ACPI: \_SB_.PCI0.MCH_: can't evaluate _ADR (0x5)
>ACPI: \_SB_.PCI0.PCIE: can't evaluate _ADR (0x5)
>PCI host bridge to bus 0000:00
>pci_bus 0000:00: root bus resource [bus 00-ff]
>pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
>pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
>pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
>pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
>pci_bus 0000:00: root bus resource [mem 0xd0000000-0xffffffff]
>pci 0000:00:00.0: [8086:2770] type 00 class 0x060000
>pci 0000:00:01.0: [8086:2771] type 01 class 0x060400
>pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:01.0: System wakeup disabled by ACPI
>pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
>pci 0000:00:1b.0: reg 0x10: [mem 0xfe9fc000-0xfe9fffff 64bit]
>pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
>pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.0: System wakeup disabled by ACPI
>pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
>pci 0000:00:1d.0: reg 0x20: [io  0xcc00-0xcc1f]
>pci 0000:00:1d.0: System wakeup disabled by ACPI
>pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
>pci 0000:00:1d.1: reg 0x20: [io  0xc880-0xc89f]
>pci 0000:00:1d.1: System wakeup disabled by ACPI
>pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
>pci 0000:00:1d.2: reg 0x20: [io  0xc800-0xc81f]
>pci 0000:00:1d.2: System wakeup disabled by ACPI
>pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
>pci 0000:00:1d.3: reg 0x20: [io  0xc480-0xc49f]
>pci 0000:00:1d.3: System wakeup disabled by ACPI
>pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
>pci 0000:00:1d.7: reg 0x10: [mem 0xfe9fbc00-0xfe9fbfff]
>pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1d.7: System wakeup disabled by ACPI
>pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
>pci 0000:00:1e.0: System wakeup disabled by ACPI
>pci 0000:00:1f.0: [8086:27b8] type 00 class 0x060100
>pci 0000:00:1f.0: address space collision: [io  0x0800-0x087f] conflicts with ACPI CPU throttle [??? 0x00000810-0x00000815 flags 0x80000000]
>pci 0000:00:1f.0: quirk: [io  0x0480-0x04bf] claimed by ICH6 GPIO
>pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 00ff)
>pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 4700 (mask 00ff)
>pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a
>pci 0000:00:1f.1: reg 0x10: [io  0x0000-0x0007]
>pci 0000:00:1f.1: reg 0x14: [io  0x0000-0x0003]
>pci 0000:00:1f.1: reg 0x18: [io  0x08f0-0x08f7]
>pci 0000:00:1f.1: reg 0x1c: [io  0x08f8-0x08fb]
>pci 0000:00:1f.1: reg 0x20: [io  0xffa0-0xffaf]
>pci 0000:00:1f.2: [8086:27c0] type 00 class 0x01018f
>pci 0000:00:1f.2: reg 0x10: [io  0xc400-0xc407]
>pci 0000:00:1f.2: reg 0x14: [io  0xc080-0xc083]
>pci 0000:00:1f.2: reg 0x18: [io  0xc000-0xc007]
>pci 0000:00:1f.2: reg 0x1c: [io  0xbc00-0xbc03]
>pci 0000:00:1f.2: reg 0x20: [io  0xb880-0xb88f]
>pci 0000:00:1f.2: PME# supported from D3hot
>pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
>pci 0000:00:1f.3: reg 0x20: [io  0x0400-0x041f]
>pci 0000:01:00.0: [1002:9505] type 00 class 0x030000
>pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
>pci 0000:01:00.0: reg 0x18: [mem 0xfeaf0000-0xfeafffff 64bit]
>pci 0000:01:00.0: reg 0x20: [io  0xd000-0xd0ff]
>pci 0000:01:00.0: reg 0x30: [mem 0xfeac0000-0xfeadffff pref]
>pci 0000:01:00.0: supports D1 D2
>pci 0000:01:00.1: [1002:aa18] type 00 class 0x040300
>pci 0000:01:00.1: reg 0x10: [mem 0xfeaec000-0xfeaeffff 64bit]
>pci 0000:01:00.1: supports D1 D2
>pci 0000:00:01.0: PCI bridge to [bus 01]
>pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
>pci 0000:00:01.0:   bridge window [mem 0xfea00000-0xfeafffff]
>pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
>pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
>pci 0000:02:00.0: reg 0x10: [io  0xe800-0xe8ff]
>pci 0000:02:00.0: reg 0x18: [mem 0xfebff000-0xfebfffff 64bit]
>pci 0000:02:00.0: reg 0x30: [mem 0xfebe0000-0xfebeffff pref]
>pci 0000:02:00.0: supports D1 D2
>pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold
>pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
>pci 0000:00:1c.0: PCI bridge to [bus 02]
>pci 0000:00:1c.0:   bridge window [io  0xe000-0xefff]
>pci 0000:00:1c.0:   bridge window [mem 0xfeb00000-0xfebfffff]
>pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [mem 0xd0000000-0xffffffff] (subtractive decode)
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 *6 7 10 11 12 14 15)
>ACPI: Enabled 2 GPEs in block 00 to 1F
>ACPI: \_SB_.PCI0: notify handler is installed
>Found 1 acpi root devices
>vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
>vgaarb: loaded
>vgaarb: bridge control possible 0000:01:00.0
>SCSI subsystem initialized
>libata version 3.00 loaded.
>PCI: Using ACPI for IRQ routing
>PCI: pci_cache_line_size set to 64 bytes
>e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
>e820: reserve RAM buffer [mem 0xcffc0000-0xcfffffff]
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>HPET: 3 timers in total, 0 timers will be used for per-cpu timer
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 comparators, 64-bit 14.318180 MHz counter
>Switched to clocksource hpet
>pnp: PnP ACPI init
>ACPI: bus type PNP registered
>system 00:00: [mem 0xfed13000-0xfed19fff] has been reserved
>system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
>pnp 00:01: [dma 4]
>pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
>pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
>pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
>pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
>pnp 00:05: [dma 0 disabled]
>pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
>pnp 00:06: [dma 0 disabled]
>pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
>pnp 00:07: [dma 0 disabled]
>pnp 00:07: Plug and Play ACPI device, IDs PNP0400 (active)
>system 00:08: [io  0x0a00-0x0a0f] has been reserved
>system 00:08: [io  0x0a10-0x0a1f] has been reserved
>system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
>system 00:09: [io  0x04d0-0x04d1] has been reserved
>system 00:09: [io  0x0800-0x087f] could not be reserved
>system 00:09: [io  0x0480-0x04bf] has been reserved
>system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
>system 00:09: [mem 0xfed20000-0xfed8ffff] has been reserved
>system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp 00:0a: Plug and Play ACPI device, IDs PNP0103 (active)
>pnp 00:0b: Plug and Play ACPI device, IDs INT0800 (active)
>system 00:0c: [mem 0xffc00000-0xfff7ffff] has been reserved
>system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
>system 00:0d: [mem 0xfec00000-0xfec00fff] could not be reserved
>system 00:0d: [mem 0xfee00000-0xfee00fff] has been reserved
>system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
>system 00:0e: [io  0x4700-0x470b] has been reserved
>system 00:0e: [mem 0xfed40000-0xfed44fff] has been reserved
>system 00:0e: Plug and Play ACPI device, IDs PNP0c02 PNP0c31 (active)
>system 00:0f: [mem 0xe0000000-0xefffffff] has been reserved
>system 00:0f: Plug and Play ACPI device, IDs PNP0c02 (active)
>system 00:10: [mem 0x00000000-0x0009ffff] could not be reserved
>system 00:10: [mem 0x000c0000-0x000cffff] could not be reserved
>system 00:10: [mem 0x000e0000-0x000fffff] could not be reserved
>system 00:10: [mem 0x00100000-0xcfffffff] could not be reserved
>system 00:10: Plug and Play ACPI device, IDs PNP0c01 (active)
>pnp: PnP ACPI: found 17 devices
>ACPI: bus type PNP unregistered
>pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
>pci 0000:00:1f.0: BAR 13: [io  0x0800-0x087f] has bogus alignment
>pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
>pci 0000:00:1c.0: BAR 15: assigned [mem 0xf0000000-0xf01fffff 64bit pref]
>pci 0000:00:01.0: PCI bridge to [bus 01]
>pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
>pci 0000:00:01.0:   bridge window [mem 0xfea00000-0xfeafffff]
>pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
>pci 0000:00:1c.0: PCI bridge to [bus 02]
>pci 0000:00:1c.0:   bridge window [io  0xe000-0xefff]
>pci 0000:00:1c.0:   bridge window [mem 0xfeb00000-0xfebfffff]
>pci 0000:00:1c.0:   bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
>pci 0000:00:1e.0: PCI bridge to [bus 03]
>pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
>pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
>pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
>pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
>pci_bus 0000:00: resource 8 [mem 0xd0000000-0xffffffff]
>pci_bus 0000:01: resource 0 [io  0xd000-0xdfff]
>pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
>pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
>pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
>pci_bus 0000:02: resource 1 [mem 0xfeb00000-0xfebfffff]
>pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref]
>pci_bus 0000:03: resource 4 [io  0x0000-0x0cf7]
>pci_bus 0000:03: resource 5 [io  0x0d00-0xffff]
>pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
>pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff]
>pci_bus 0000:03: resource 8 [mem 0xd0000000-0xffffffff]
>NET: Registered protocol family 2
>TCP established hash table entries: 32768 (order: 7, 524288 bytes)
>TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 32768 bind 32768)
>TCP: reno registered
>UDP hash table entries: 2048 (order: 4, 65536 bytes)
>UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
>NET: Registered protocol family 1
>pci 0000:01:00.0: Boot video device
>PCI: CLS 32 bytes, default 64
>Trying to unpack rootfs image as initramfs...
>Freeing initrd memory: 10692K (ffff88003757f000 - ffff880037ff0000)
>audit: initializing netlink socket (disabled)
>type=2000 audit(1387532976.314:1): initialized
>bounce pool size: 64 pages
>HugeTLB registered 2 MB page size, pre-allocated 0 pages
>zbud: loaded
>VFS: Disk quotas dquot_6.5.2
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>bio: create slab <bio-1> at 1
>Btrfs loaded
>msgmni has been set to 6519
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>io scheduler noop registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>pciehp: PCI Express Hot Plug Controller Driver version: 0.4
>intel_idle: does not run on family 6 model 15
>GHES: HEST is not enabled!
>Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
>00:06: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
>Linux agpgart interface v0.103
>brd: module loaded
>i8042: PNP: No PS/2 controller found. Probing ports directly.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mousedev: PS/2 mouse device common for all mice
>rtc_cmos 00:02: RTC can wake from S4
>rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
>rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
>ledtrig-cpu: registered to indicate activity on CPUs
>TCP: cubic registered
>Key type dns_resolver registered
>mpls_gso: MPLS GSO support
>registered taskstats version 1
>  Magic number: 9:281:829
>rtc_cmos 00:02: setting system clock to 2013-12-20 09:49:37 UTC (1387532977)
>BIOS EDD facility v0.16 2004-Jun-25, 4 devices found
>PM: Checking hibernation image partition UUID=bca0e8f4-6b4c-47e7-a180-5692370ef735
>PM: Hibernation image not present or could not be loaded.
>Freeing unused kernel memory: 1228K (ffffffff81cdb000 - ffffffff81e0e000)
>Write protecting the kernel read-only data: 12288k
>Freeing unused kernel memory: 1896K (ffff880001626000 - ffff880001800000)
>Freeing unused kernel memory: 1072K (ffff880001af4000 - ffff880001c00000)
>dracut: dracut-034
>ata_piix 0000:00:1f.1: version 2.13
>ata_piix 0000:00:1f.1: setting latency timer to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
>ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
>ata_piix 0000:00:1f.2: MAP [
> P0 P2 P1 P3 ]
>ata_piix 0000:00:1f.2: setting latency timer to 64
>scsi2 : ata_piix
>scsi3 : ata_piix
>ata3: SATA max UDMA/133 cmd 0xc400 ctl 0xc080 bmdma 0xb880 irq 19
>ata4: SATA max UDMA/133 cmd 0xc000 ctl 0xbc00 bmdma 0xb888 irq 19
>ata3.00: ATA-7: SAMSUNG HD753LJ, 1AA01109, max UDMA7
>ata3.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata3.01: ATA-8: SAMSUNG HD204UI, 1AQ10001, max UDMA/133
>ata3.01: 3907029168 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata3.00: configured for UDMA/133
>ata3.01: configured for UDMA/133
>scsi 2:0:0:0: Direct-Access     ATA      SAMSUNG HD753LJ  1AA0 PQ: 0 ANSI: 5
>sd 2:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
>sd 2:0:0:0: [sda] Write Protect is off
>sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>scsi 2:0:1:0: Direct-Access     ATA      SAMSUNG HD204UI  1AQ1 PQ: 0 ANSI: 5
>sd 2:0:1:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
>sd 2:0:1:0: [sdb] Write Protect is off
>sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00
>ata4.00: ATA-8: ST31500341AS, CC1H, max UDMA/133
>ata4.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata4.01: ATAPI: TSSTcorp DVD+/-RW TS-H553A, DE04, max UDMA/33
>ata4.01: applying bridge limits
>sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>ata4.00: configured for UDMA/133
> sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 >
>ata4.01: configured for UDMA/33
>scsi 3:0:0:0: Direct-Access     ATA      ST31500341AS     CC1H PQ: 0 ANSI: 5
>sd 3:0:0:0: [sdc] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
>sd 3:0:0:0: [sdc] Write Protect is off
>sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
>sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>scsi 3:0:1:0: CD-ROM            TSSTcorp DVD+-RW TS-H553A DE04 PQ: 0 ANSI: 5
> sdb: sdb1
>sd 2:0:0:0: [sda] Attached SCSI disk
>sd 2:0:1:0: [sdb] Attached SCSI disk
> sdc: sdc1 sdc2 < sdc5 sdc6 sdc7 >
>sd 3:0:0:0: [sdc] Attached SCSI disk
>Uniform Multi-Platform E-IDE driver
>ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
>systemd-udevd[195]: starting version 208
>Initialized drm 1.1.0 20060810
>radeon kernel modesetting enabled.
>pcieport 0000:00:01.0: driver skip pci_set_master, fix it!
>initializing kernel modesetting (RV670 0x1002:0x9505 0x174B:0x2542).
>register mmio base: 0xFEAF0000
>register mmio size: 65536
>ATOM BIOS: 113
>radeon 0000:01:00.0: VRAM: 256M 0x0000000000000000 - 0x000000000FFFFFFF (256M used)
>radeon 0000:01:00.0: GTT: 512M 0x0000000010000000 - 0x000000002FFFFFFF
>Detected VRAM RAM=256M, BAR=256M
>RAM width 256bits DDR
>Zone  kernel: Available graphics memory: 1671018 kiB
>Initializing pool allocator
>Initializing DMA pool allocator
>radeon: 256M of VRAM memory ready
>radeon: 512M of GTT memory ready.
>GART: num cpu pages 131072, num gpu pages 131072
>Loading RV670 Microcode
>PCIE GART of 512M enabled (table at 0x0000000000040000).
>radeon 0000:01:00.0: WB enabled
>radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000010000c00 and cpu addr 0xffff880037762c00
>radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000010000c0c and cpu addr 0xffff880037762c0c
>Supports vblank timestamp caching Rev 1 (10.10.2010).
>Driver supports precise vblank timestamp query.
>radeon 0000:01:00.0: irq 40 for MSI/MSI-X
>radeon 0000:01:00.0: radeon: using MSI.
>radeon: irq initialized.
>ring test on 0 succeeded in 1 usecs
>ring test on 3 succeeded in 1 usecs
>Enabling audio 0 support
>ib test on ring 0 succeeded in 0 usecs
>ib test on ring 3 succeeded in 0 usecs
>Radeon Display Connectors
>Connector 0:
>  DVI-I-1
>  HPD1
>  DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
>  Encoders:
>    DFP1: INTERNAL_KLDSCP_TMDS1
>    CRT2: INTERNAL_KLDSCP_DAC2
>Connector 1:
>  DIN-1
>  Encoders:
>    TV1: INTERNAL_KLDSCP_DAC2
>Connector 2:
>  DVI-I-2
>  HPD2
>  DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
>  Encoders:
>    CRT1: INTERNAL_KLDSCP_DAC1
>    DFP2: INTERNAL_LVTM1
>Internal thermal controller with fan control
>== power state 0 ==
>	ui class: none
>	internal class: boot 
>	caps: video 
>	uvd    vclk: 0 dclk: 0
>		power level 0    sclk: 66900 mclk: 82900 vddc: 1214
>		power level 1    sclk: 66900 mclk: 82900 vddc: 1214
>		power level 2    sclk: 66900 mclk: 82900 vddc: 1214
>	status: c r b 
>== power state 1 ==
>	ui class: performance
>	internal class: ovrdrv 
>	caps: single_disp video 
>	uvd    vclk: 0 dclk: 0
>		power level 0    sclk: 30000 mclk: 82900 vddc: 1014
>		power level 1    sclk: 30000 mclk: 82900 vddc: 1014
>		power level 2    sclk: 66900 mclk: 82900 vddc: 1214
>	status: 
>== power state 2 ==
>	ui class: performance
>	internal class: none
>	caps: video 
>	uvd    vclk: 0 dclk: 0
>		power level 0    sclk: 30000 mclk: 82900 vddc: 1014
>		power level 1    sclk: 30000 mclk: 82900 vddc: 1014
>		power level 2    sclk: 66900 mclk: 82900 vddc: 1214
>	status: 
>== power state 3 ==
>	ui class: none
>	internal class: uvd 
>	caps: video 
>	uvd    vclk: 40000 dclk: 30000
>		power level 0    sclk: 66900 mclk: 82900 vddc: 1214
>		power level 1    sclk: 66900 mclk: 82900 vddc: 1214
>		power level 2    sclk: 66900 mclk: 82900 vddc: 1214
>	status: 
>switching from power state:
>	ui class: none
>	internal class: boot 
>	caps: video 
>	uvd    vclk: 0 dclk: 0
>		power level 0    sclk: 66900 mclk: 82900 vddc: 1214
>		power level 1    sclk: 66900 mclk: 82900 vddc: 1214
>		power level 2    sclk: 66900 mclk: 82900 vddc: 1214
>	status: c b 
>switching to power state:
>	ui class: performance
>	internal class: ovrdrv 
>	caps: single_disp video 
>	uvd    vclk: 0 dclk: 0
>		power level 0    sclk: 30000 mclk: 82900 vddc: 1014
>		power level 1    sclk: 30000 mclk: 82900 vddc: 1014
>		power level 2    sclk: 66900 mclk: 82900 vddc: 1214
>	status: r 
>tsc: Refined TSC clocksource calibration: 1994.999 MHz
>radeon: dpm initialized
>fb mappable at 0xD0141000
>vram apper at 0xD0000000
>size 9216000
>fb depth is 24
>   pitch is 7680
>fbcon: radeondrmfb (fb0) is primary device
>*ERROR* atombios stuck in loop for more than 5secs aborting
>*ERROR* atombios stuck executing CE58 (len 349, WS 0, PS 4) @ 0xCE75
>Switched to clocksource tsc
>Console: switching to colour frame buffer device 240x75
>radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
>radeon 0000:01:00.0: registered panic notifier
>Initialized radeon 2.34.0 20080528 for 0000:01:00.0 on minor 0
>dracut: Starting plymouth daemon
>ACPI: bus type USB registered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
>cdrom: Uniform CD-ROM driver Revision: 3.20
>sr 3:0:1:0: Attached scsi CD-ROM sr0
>uhci_hcd: USB Universal Host Controller Interface driver
>uhci_hcd 0000:00:1d.0: setting latency timer to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000cc00
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: UHCI Host Controller
>usb usb1: Manufacturer: Linux 3.12.5-desktop-1.mga4 uhci_hcd
>usb usb1: SerialNumber: 0000:00:1d.0
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.1: setting latency timer to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c880
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: UHCI Host Controller
>usb usb2: Manufacturer: Linux 3.12.5-desktop-1.mga4 uhci_hcd
>usb usb2: SerialNumber: 0000:00:1d.1
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.2: setting latency timer to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c800
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 3.12.5-desktop-1.mga4 uhci_hcd
>usb usb3: SerialNumber: 0000:00:1d.2
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.3: setting latency timer to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000c480
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 3.12.5-desktop-1.mga4 uhci_hcd
>usb usb4: SerialNumber: 0000:00:1d.3
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
>ehci-pci: EHCI PCI platform driver
>ehci-pci 0000:00:1d.7: setting latency timer to 64
>ehci-pci 0000:00:1d.7: EHCI Host Controller
>ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 5
>ehci-pci 0000:00:1d.7: debug port 1
>ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
>ehci-pci 0000:00:1d.7: irq 23, io mem 0xfe9fbc00
>ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
>usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: EHCI Host Controller
>usb usb5: Manufacturer: Linux 3.12.5-desktop-1.mga4 ehci_hcd
>usb usb5: SerialNumber: 0000:00:1d.7
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 8 ports detected
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>usb 5-2: new high-speed USB device number 3 using ehci-pci
>usb 5-2: New USB device found, idVendor=058f, idProduct=6395
>usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 5-2: Product: USB to SATA Bridge
>usb 5-2: Manufacturer: Generic
>usb-storage 5-2:1.0: USB Mass Storage device detected
>scsi4 : usb-storage 5-2:1.0
>usbcore: registered new interface driver usb-storage
>usb 1-1: new low-speed USB device number 2 using uhci_hcd
>PM: Marking nosave pages: [mem 0x0009f000-0x000fffff]
>PM: Basic memory bitmaps created
>PM: Basic memory bitmaps freed
>PM: Starting manual resume from disk
>PM: Hibernation image partition 8:5 present
>PM: Looking for hibernation image.
>PM: Image not found (code -22)
>PM: Hibernation image not present or could not be loaded.
>EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
>dracut: Checking ext4: /dev/disk/by-uuid/844ab078-1d9a-447d-bd92-c5219b9ab5d2
>dracut: issuing e2fsck -a  /dev/disk/by-uuid/844ab078-1d9a-447d-bd92-c5219b9ab5d2
>dracut: /dev/disk/by-uuid/844ab078-1d9a-447d-bd92-c5219b9ab5d2: clean, 186863/1479856 files, 1984345/5917792 blocks
>dracut: Mounting /dev/disk/by-uuid/844ab078-1d9a-447d-bd92-c5219b9ab5d2 with -o acl,relatime,ro
>usb 1-1: New USB device found, idVendor=0b38, idProduct=0010
>usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: acl
>hidraw: raw HID events driver (C) Jiri Kosina
>usbcore: registered new interface driver usbhid
>usbhid: USB HID core driver
>input: HID 0b38:0010 as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.0/input/input3
>hid-generic 0003:0B38:0010.0001: input,hidraw0: USB HID v1.10 Keyboard [HID 0b38:0010] on usb-0000:00:1d.0-1/input0
>input: HID 0b38:0010 as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.1/input/input4
>hid-generic 0003:0B38:0010.0002: input,hidraw1: USB HID v1.10 Device [HID 0b38:0010] on usb-0000:00:1d.0-1/input1
>dracut: Mounted root filesystem /dev/sda1
>scsi 4:0:0:0: Direct-Access     Hitachi  HTS541612J9SA00  9.03 PQ: 0 ANSI: 2 CCS
>sd 4:0:0:0: [sdd] 234441648 512-byte logical blocks: (120 GB/111 GiB)
>sd 4:0:0:0: [sdd] Write Protect is off
>sd 4:0:0:0: [sdd] Mode Sense: 03 00 00 00
>sd 4:0:0:0: [sdd] No Caching mode page found
>sd 4:0:0:0: [sdd] Assuming drive cache: write through
>sd 4:0:0:0: [sdd] No Caching mode page found
>sd 4:0:0:0: [sdd] Assuming drive cache: write through
>usb 2-1: new low-speed USB device number 2 using uhci_hcd
>dracut: Switching root
>Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
>usb 2-1: New USB device found, idVendor=045e, idProduct=0040
>usb 2-1: New USB device strings: Mfr=1, Product=3, SerialNumber=0
>usb 2-1: Product: Microsoft 3-Button Mouse with IntelliEye(TM)
>usb 2-1: Manufacturer: Microsoft
>input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1:1.0/input/input5
>hid-generic 0003:045E:0040.0003: input,hidraw2: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.1-1/input0
> sdd: sdd1 sdd2 < sdd5 sdd6 > sdd3
>sd 4:0:0:0: [sdd] No Caching mode page found
>sd 4:0:0:0: [sdd] Assuming drive cache: write through
>sd 4:0:0:0: [sdd] Attached SCSI disk
>systemd[1]: RTC configured in localtime, applying delta of 60 minutes to system time.
>systemd[1]: systemd 208 running in system mode. (+PAM +LIBWRAP +AUDIT -SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
>systemd[1]: Inserted module 'autofs4'
>NET: Registered protocol family 10
>systemd[1]: Inserted module 'ipv6'
>systemd[1]: Set hostname to <localhost>.
>systemd[1]: [/etc/rc.d/init.d/xencommons:10] Failed to add LSB Provides name xenstored.service, ignoring: File exists
>systemd[1]: [/etc/rc.d/init.d/xencommons:10] Failed to add LSB Provides name xenconsoled.service, ignoring: File exists
>systemd[1]: Cannot add dependency job for unit mdmonitor-takeover.service, ignoring: Unit mdmonitor-takeover.service failed to load: No such file or directory.
>systemd[1]: Starting RPC Port Mapper.
>systemd[1]: Reached target RPC Port Mapper.
>systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
>systemd[1]: Started Forward Password Requests to Wall Directory Watch.
>systemd[1]: Starting Login Prompts.
>systemd[1]: Reached target Login Prompts.
>systemd[1]: Starting Syslog Socket.
>systemd[1]: Listening on Syslog Socket.
>systemd[1]: Starting Delayed Shutdown Socket.
>systemd[1]: Listening on Delayed Shutdown Socket.
>systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
>systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
>systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
>systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
>systemd[1]: Starting Journal Socket.
>systemd[1]: Listening on Journal Socket.
>systemd[1]: Starting Load legacy module configuration...
>systemd[1]: Starting Setup Virtual Console...
>systemd[1]: Started Set Up Additional Binary Formats.
>systemd[1]: Starting Create list of required static device nodes for the current kernel...
>systemd[1]: Mounting POSIX Message Queue File System...
>systemd[1]: Starting Apply Kernel Variables...
>systemd[1]: Starting Journal Service...
>systemd[1]: Started Journal Service.
>systemd[1]: Starting Set default kernel console loglevel...
>systemd-journald[443]: Vacuuming done, freed 0 bytes
>systemd[1]: Starting Load Kernel Modules...
>systemd[1]: Mounting Debug File System...
>systemd[1]: Starting Encrypted Volumes.
>systemd[1]: Reached target Encrypted Volumes.
>systemd[1]: Mounting Huge Pages File System...
>systemd[1]: Expecting device dev-disk-by\x2duuid-bca0e8f4\x2d6b4c\x2d47e7\x2da180\x2d5692370ef735.device...
>systemd[1]: Mounting Temporary Directory...
>systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway.
>systemd[1]: Starting udev Kernel Socket.
>systemd[1]: Listening on udev Kernel Socket.
>systemd[1]: Starting udev Control Socket.
>systemd[1]: Listening on udev Control Socket.
>systemd[1]: Starting udev Coldplug all Devices...
>systemd[1]: Starting Initialize storage subsystems (RAID, LVM, etc.)...
>systemd[1]: Started Import network configuration from initramfs.
>systemd[1]: Starting File System Check on Root Device...
>systemd[1]: Expecting device dev-disk-by\x2duuid-38f0e25b\x2d8ec1\x2d49bb\x2d9718\x2d0b0a08a14ae1.device...
>systemd[1]: Expecting device dev-disk-by\x2dlabel-BIG\x2d2T\x2dbis.device...
>systemd[1]: Starting Root Slice.
>systemd[1]: Created slice Root Slice.
>systemd[1]: Starting User and Session Slice.
>systemd[1]: Created slice User and Session Slice.
>systemd[1]: Starting System Slice.
>systemd[1]: Created slice System Slice.
>systemd[1]: Starting system-getty.slice.
>systemd[1]: Created slice system-getty.slice.
>systemd[1]: Starting Slices.
>systemd[1]: Reached target Slices.
>systemd[1]: Expecting device dev-disk-by\x2dlabel-BIG\x2dDATA.device...
>systemd[1]: Started Setup Virtual Console.
>systemd[1]: Started Create list of required static device nodes for the current kernel.
>systemd[1]: Mounted POSIX Message Queue File System.
>systemd[1]: Started Apply Kernel Variables.
>systemd[1]: Mounted Debug File System.
>systemd[1]: Mounted Huge Pages File System.
>systemd[1]: Mounted Temporary Directory.
>systemd[1]: Starting Create static device nodes in /dev...
>systemd[1]: Started Load Kernel Modules.
>systemd[1]: Mounted Configuration File System.
>systemd[1]: Mounted FUSE Control File System.
>systemd[1]: Started Set default kernel console loglevel.
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.26.0-ioctl (2013-08-15) initialised: dm-devel@redhat.com
>systemd-udevd[478]: starting version 208
>ACPI: Requesting acpi_cpufreq
>EXT4-fs (sda1): re-mounted. Opts: acl
>input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input6
>ACPI: Power Button [PWRB]
>input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
>ACPI: Power Button [PWRF]
>intel_rng: FWH not detected
>parport_pc 00:07: reported by Plug and Play ACPI
>parport0: PC-style at 0x378, irq 7 [PCSPP]
>i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>ACPI Warning: 0x0000000000000828-0x000000000000082f SystemIO conflicts with Region \PMRG 1 (20130725/utaddress-251)
>ACPI Warning: 0x0000000000000828-0x000000000000082f SystemIO conflicts with Region \PMIO 2 (20130725/utaddress-251)
>ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>lpc_ich: Resource conflict(s) found affecting gpio_ich
>leds_ss4200: no LED devices found
>snd_hda_intel 0000:00:1b.0: irq 41 for MSI/MSI-X
>r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
>r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
>pcieport 0000:00:1c.0: driver skip pci_set_master, fix it!
>r8169 0000:02:00.0: irq 42 for MSI/MSI-X
>r8169 0000:02:00.0 eth0: RTL8168b/8111b at 0xffffc9000077c000, 00:1b:b9:f6:ed:92, XID 18000000 IRQ 42
>r8169 0000:02:00.0 eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko]
>SKU: Nid=0x1d sku_cfg=0x4004c601
>SKU: port_connectivity=0x1
>SKU: enable_pcbeep=0x0
>SKU: check_sum=0x00000004
>SKU: customization=0x000000c6
>SKU: external_amp=0x0
>SKU: platform_type=0x0
>SKU: swap=0x0
>SKU: override=0x1
>autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
>   speaker_outs=1 (0x17/0x0/0x0/0x0/0x0)
>   hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
>   mono: mono_out=0x0
>   inputs:
>     Front Mic=0x19
>     Rear Mic=0x18
>     Line=0x1a
>realtek: No valid SSID, checking pincfg 0x4004c601 for NID 0x1d
>realtek: Enabling init ASM_ID=0xc601 CODEC_ID=10ec0888
>input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
>input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
>input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
>input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
>input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
>hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
>hda-intel 0000:01:00.1: Using LPIB position fix
>snd_hda_intel 0000:01:00.1: irq 43 for MSI/MSI-X
>hda-intel 0000:01:00.1: Enable sync_write for stable communication
>HDMI: ELD buf size is 0, force 128
>HDMI: invalid ELD data byte 0
>input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
>gpio_ich: GPIO from 206 to 255 on gpio_ich
>microcode: CPU0 sig=0x6fd, pf=0x1, revision=0xa1
>ppdev: user-space parallel port driver
>microcode: CPU1 sig=0x6fd, pf=0x1, revision=0xa1
>microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
>coretemp coretemp.0: Using relative temperature scale!
>coretemp coretemp.0: Using relative temperature scale!
>iTCO_vendor_support: vendor-support=0
>EXT4-fs (sdc7): mounted filesystem with ordered data mode. Opts: (null)
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
>iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0860)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=1)
>EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
>Adding 4086488k swap on /dev/sda5.  Priority:-1 extents:1 across:4086488k FS
>EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: acl
>systemd-journald[443]: Received request to flush runtime journal from PID 1
>vboxdrv: Found 2 processor cores.
>vboxdrv: fAsync=0 offMin=0x2a8 offMax=0x16ee
>vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
>vboxdrv: Successfully loaded version 4.3.4_OSE (interface 0x001a0005).
>microcode: Microcode Update Driver: v2.00 removed.
>*ERROR* atombios stuck in loop for more than 5secs aborting
>*ERROR* atombios stuck executing CE58 (len 349, WS 0, PS 4) @ 0xCE75
>r8169 0000:02:00.0 eth0: link down
>r8169 0000:02:00.0 eth0: link down
>IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
>Bridge firewalling registered
>r8169 0000:02:00.0 eth0: link up
>IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>NET: Registered protocol family 17
>Ebtables v2.0 registered
>ip_tables: (C) 2000-2006 Netfilter Core Team
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>fuse init (API version 7.22)
>Bluetooth: Core ver 2.16
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: SCO socket layer initialized
>Bluetooth: BNEP (Ethernet Emulation) ver 1.3
>Bluetooth: BNEP filters: protocol multicast
>Bluetooth: BNEP socket layer initialized
>zram: module is from the staging directory, the quality is unknown, you have been warned.
>zram: Created 2 device(s) ...
>Adding 551432k swap on /dev/zram0.  Priority:100 extents:1 across:551432k SSFS
>Adding 551432k swap on /dev/zram1.  Priority:100 extents:1 across:551432k SSFS
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>IPv6: ADDRCONF(NETDEV_UP): virbr0: link is not ready
>radeon 0000:01:00.0: GPU lockup CP stall for more than 10000msec
>radeon 0000:01:00.0: GPU lockup (waiting for 0x0000000000000003 last fence id 0x0000000000000001)
>Disabling audio 0 support
>radeon 0000:01:00.0: Saved 57 dwords of commands on ring 0.
>radeon 0000:01:00.0: GPU softreset: 0x00000059
>radeon 0000:01:00.0:   R_008010_GRBM_STATUS      = 0xE77024AC
>radeon 0000:01:00.0:   R_008014_GRBM_STATUS2     = 0x00FF0F03
>radeon 0000:01:00.0:   R_000E50_SRBM_STATUS      = 0x200080C0
>radeon 0000:01:00.0:   R_008674_CP_STALLED_STAT1 = 0x04000000
>radeon 0000:01:00.0:   R_008678_CP_STALLED_STAT2 = 0x00000002
>radeon 0000:01:00.0:   R_00867C_CP_BUSY_STAT     = 0x00008484
>radeon 0000:01:00.0:   R_008680_CP_STAT          = 0x80918645
>radeon 0000:01:00.0:   R_00D034_DMA_STATUS_REG   = 0x44C83D57
>radeon 0000:01:00.0: R_008020_GRBM_SOFT_RESET=0x00007FEF
>radeon 0000:01:00.0: SRBM_SOFT_RESET=0x00002100
>radeon 0000:01:00.0:   R_008010_GRBM_STATUS      = 0xA0003030
>radeon 0000:01:00.0:   R_008014_GRBM_STATUS2     = 0x00000003
>radeon 0000:01:00.0:   R_000E50_SRBM_STATUS      = 0x200000C0
>radeon 0000:01:00.0:   R_008674_CP_STALLED_STAT1 = 0x00000000
>radeon 0000:01:00.0:   R_008678_CP_STALLED_STAT2 = 0x00000000
>radeon 0000:01:00.0:   R_00867C_CP_BUSY_STAT     = 0x00000000
>radeon 0000:01:00.0:   R_008680_CP_STAT          = 0x80120000
>radeon 0000:01:00.0:   R_00D034_DMA_STATUS_REG   = 0x44C83D57
>radeon 0000:01:00.0: GPU reset succeeded, trying to resume
>*ERROR* atombios stuck in loop for more than 5secs aborting
>*ERROR* atombios stuck executing CDBE (len 153, WS 0, PS 4) @ 0xCDD4
>*ERROR* atombios stuck executing B9E2 (len 760, WS 0, PS 0) @ 0xBB6B
>*ERROR* atombios stuck executing B920 (len 138, WS 0, PS 8) @ 0xB92A
>PCIE GART of 512M enabled (table at 0x0000000000040000).
>radeon 0000:01:00.0: WB enabled
>radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000010000c00 and cpu addr 0xffff880037762c00
>radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000010000c0c and cpu addr 0xffff880037762c0c
>ring test on 0 succeeded in 1 usecs
>ring test on 3 succeeded in 1 usecs
>Enabling audio 0 support
>HDMI: ELD buf size is 0, force 128
>HDMI: invalid ELD data byte 0
>ib test on ring 0 succeeded in 0 usecs
>ib test on ring 3 succeeded in 1 usecs
>switching from power state:
>	ui class: none
>	internal class: boot 
>	caps: video 
>	uvd    vclk: 0 dclk: 0
>		power level 0    sclk: 66900 mclk: 82900 vddc: 1214
>		power level 1    sclk: 66900 mclk: 82900 vddc: 1214
>		power level 2    sclk: 66900 mclk: 82900 vddc: 1214
>	status: c b 
>switching to power state:
>	ui class: performance
>	internal class: ovrdrv 
>	caps: single_disp video 
>	uvd    vclk: 0 dclk: 0
>		power level 0    sclk: 30000 mclk: 82900 vddc: 1014
>		power level 1    sclk: 30000 mclk: 82900 vddc: 1014
>		power level 2    sclk: 66900 mclk: 82900 vddc: 1214
>	status: r 
>HDMI: ELD buf size is 0, force 128
>HDMI: invalid ELD data byte 0
>HDMI: ELD buf size is 0, force 128
>HDMI: invalid ELD data byte 0
>HDMI: ELD buf size is 0, force 128
>HDMI: invalid ELD data byte 0
>HDMI: ELD buf size is 0, force 128
>HDMI: invalid ELD data byte 0
>HDMI: ELD buf size is 0, force 128
>HDMI: invalid ELD data byte 0
>HDMI: ELD buf size is 0, force 128
>HDMI: invalid ELD data byte 0
>HDMI: ELD buf size is 0, force 128
>HDMI: invalid ELD data byte 0
>HDMI: ELD buf size is 0, force 128
>HDMI: invalid ELD data byte 0
>*ERROR* atombios stuck in loop for more than 5secs aborting
>*ERROR* atombios stuck executing CE58 (len 349, WS 0, PS 4) @ 0xCE75

Actions: View

Attachments on bug 72905: 91024 | 91025 | 91026 | 91027 | 91028 | 91029

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.