Attachment 94258 Details for Bug 75131 – dmesg

dmesg

dmesg_pnv2_0218.txt (text/plain), 78.34 KB, created by lu hua on 2014-02-18 06:14:26 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: lu hua

Created: 2014-02-18 06:14:26 UTC

Size: 78.34 KB

patch

obsolete

>[    0.000000] Initializing cgroup subsys cpuset
>[    0.000000] Initializing cgroup subsys cpu
>[    0.000000] Initializing cgroup subsys cpuacct
>[    0.000000] Linux version 3.13.0_drm-intel-nightly_1be8f2_20140218+ (buildtopcommit@x-kernel) (gcc version 4.7.0 20120507 (Red Hat 4.7.0-5) (GCC) ) #170 SMP Tue Feb 18 08:37:17 CST 2014
>[    0.000000] Disabled fast string operations
>[    0.000000] e820: BIOS-provided physical RAM map:
>[    0.000000] BIOS-e820: [mem 0x0000000000000100-0x000000000009ebff] usable
>[    0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007f3f7fff] usable
>[    0.000000] BIOS-e820: [mem 0x000000007f3f8000-0x000000007f43dfff] ACPI NVS
>[    0.000000] BIOS-e820: [mem 0x000000007f43e000-0x000000007f444fff] ACPI data
>[    0.000000] BIOS-e820: [mem 0x000000007f445000-0x000000007f447fff] ACPI NVS
>[    0.000000] BIOS-e820: [mem 0x000000007f448000-0x000000007f46bfff] reserved
>[    0.000000] BIOS-e820: [mem 0x000000007f46c000-0x000000007f46cfff] usable
>[    0.000000] BIOS-e820: [mem 0x000000007f46d000-0x000000007f476fff] ACPI NVS
>[    0.000000] BIOS-e820: [mem 0x000000007f477000-0x000000007f497fff] reserved
>[    0.000000] BIOS-e820: [mem 0x000000007f498000-0x000000007f49efff] ACPI NVS
>[    0.000000] BIOS-e820: [mem 0x000000007f49f000-0x000000007f5fffff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
>[    0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
>[    0.000000] SMBIOS 2.6 present.
>[    0.000000] DMI: MICRO-STAR INTERNATIONAL CO., LTD MS-N014/MS-N014, BIOS EN014IMS.10B 11/30/2009
>[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
>[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
>[    0.000000] e820: last_pfn = 0x7f600 max_arch_pfn = 0x100000
>[    0.000000] MTRR default type: uncachable
>[    0.000000] MTRR fixed ranges enabled:
>[    0.000000]   00000-9FFFF write-back
>[    0.000000]   A0000-BFFFF uncachable
>[    0.000000]   C0000-CFFFF write-protect
>[    0.000000]   D0000-E7FFF uncachable
>[    0.000000]   E8000-FFFFF write-protect
>[    0.000000] MTRR variable ranges enabled:
>[    0.000000]   0 base 000000000 mask 080000000 write-back
>[    0.000000]   1 base 07F600000 mask 0FFF00000 write-through
>[    0.000000]   2 base 07F700000 mask 0FFF00000 uncachable
>[    0.000000]   3 base 07F800000 mask 0FF800000 uncachable
>[    0.000000]   4 disabled
>[    0.000000]   5 disabled
>[    0.000000]   6 disabled
>[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>[    0.000000] found SMP MP-table at [mem 0x000fcac0-0x000fcacf] mapped at [c00fcac0]
>[    0.000000] initial memory mapped: [mem 0x00000000-0x023fffff]
>[    0.000000] Base memory trampoline at [c009a000] 9a000 size 16384
>[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
>[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
>[    0.000000] init_memory_mapping: [mem 0x37000000-0x373fffff]
>[    0.000000]  [mem 0x37000000-0x373fffff] page 2M
>[    0.000000] init_memory_mapping: [mem 0x30000000-0x36ffffff]
>[    0.000000]  [mem 0x30000000-0x36ffffff] page 2M
>[    0.000000] init_memory_mapping: [mem 0x00100000-0x2fffffff]
>[    0.000000]  [mem 0x00100000-0x003fffff] page 4k
>[    0.000000]  [mem 0x00400000-0x2fffffff] page 2M
>[    0.000000] init_memory_mapping: [mem 0x37400000-0x377fdfff]
>[    0.000000]  [mem 0x37400000-0x377fdfff] page 4k
>[    0.000000] BRK [0x02057000, 0x02057fff] PGTABLE
>[    0.000000] ACPI: RSDP 000f0410 000024 (v03 MSI_NB)
>[    0.000000] ACPI: XSDT 7f43e080 00004C (v01 MSI_NB MEGABOOK 01072009 AMI  00010013)
>[    0.000000] ACPI: FACP 7f444ad0 0000F4 (v04 MSI_NB MEGABOOK 01072009 AMI  00010013)
>[    0.000000] ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20131115/tbfadt-395)
>[    0.000000] ACPI BIOS Warning (bug): 32/64X FACS address mismatch in FADT - 0x7F473F40/0x000000007F473F80, using 32 (20131115/tbfadt-522)
>[    0.000000] ACPI: DSDT 7f43e158 006975 (v02 MSI_NB MEGABOOK 00000000 INTL 20051117)
>[    0.000000] ACPI: FACS 7f473f40 000040
>[    0.000000] ACPI: APIC 7f444bc8 000062 (v01 MSI_NB MEGABOOK 01072009 AMI  00010013)
>[    0.000000] ACPI: MCFG 7f444c30 00003C (v01 A M I  ITL 945. 01072009 MSFT 00000097)
>[    0.000000] ACPI: SLIC 7f444c70 000176 (v01 MSI_NB MEGABOOK 01072009 AMI  00010013)
>[    0.000000] ACPI: HPET 7f444de8 000038 (v01 MSI_NB MEGABOOK 01072009 AMI. 00000003)
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] 1150MB HIGHMEM available.
>[    0.000000] 887MB LOWMEM available.
>[    0.000000]   mapped low ram: 0 - 377fe000
>[    0.000000]   low ram: 0 - 377fe000
>[    0.000000] BRK [0x02058000, 0x02058fff] PGTABLE
>[    0.000000] Zone ranges:
>[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
>[    0.000000]   Normal   [mem 0x01000000-0x377fdfff]
>[    0.000000]   HighMem  [mem 0x377fe000-0x7f5fffff]
>[    0.000000] Movable zone start for each node
>[    0.000000] Early memory node ranges
>[    0.000000]   node   0: [mem 0x00001000-0x0009dfff]
>[    0.000000]   node   0: [mem 0x00100000-0x7f3f7fff]
>[    0.000000]   node   0: [mem 0x7f46c000-0x7f46cfff]
>[    0.000000]   node   0: [mem 0x7f49f000-0x7f5fffff]
>[    0.000000] On node 0 totalpages: 521463
>[    0.000000]   DMA zone: 32 pages used for memmap
>[    0.000000]   DMA zone: 0 pages reserved
>[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
>[    0.000000]   Normal zone: 1744 pages used for memmap
>[    0.000000]   Normal zone: 223230 pages, LIFO batch:31
>[    0.000000]   HighMem zone: 2301 pages used for memmap
>[    0.000000]   HighMem zone: 294236 pages, LIFO batch:31
>[    0.000000] Using APIC driver default
>[    0.000000] ACPI: PM-Timer IO Port: 0x808
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
>[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>[    0.000000] ACPI: IRQ0 used by override.
>[    0.000000] ACPI: IRQ2 used by override.
>[    0.000000] ACPI: IRQ9 used by override.
>[    0.000000] Using ACPI (MADT) for SMP configuration information
>[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
>[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
>[    0.000000] nr_irqs_gsi: 40
>[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
>[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
>[    0.000000] e820: [mem 0x80000000-0xfebfffff] available for PCI devices
>[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
>[    0.000000] PERCPU: Embedded 12 pages/cpu @f67da000 s26336 r0 d22816 u49152
>[    0.000000] pcpu-alloc: s26336 r0 d22816 u49152 alloc=12*4096
>[    0.000000] pcpu-alloc: [0] 0 [0] 1 
>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 519687
>[    0.000000] Kernel command line: BOOT_IMAGE=kernels//nightly_parents/2014_02_18/drm-intel-nightly/1be8f2b4dd6d3db00af24d4891c82d2650bd282d/bzImage_i386 root=/dev/sda2 drm.debug=0xe modules_path=kernels//nightly_parents/2014_02_18/drm-intel-nightly/1be8f2b4dd6d3db00af24d4891c82d2650bd282d/modules_i386/lib/modules/3.13.0_drm-intel-nightly_1be8f2_20140218+
>[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
>[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>[    0.000000] Initializing CPU#0
>[    0.000000] Initializing HighMem for node 0 (000377fe:0007f600)
>[    0.000000] Memory: 2037380K/2085852K available (6762K kernel code, 410K rwdata, 3232K rodata, 20208K init, 376K bss, 48472K reserved, 1176944K highmem)
>[    0.000000] virtual kernel memory layout:
>    fixmap  : 0xfff16000 - 0xfffff000   ( 932 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
>    lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
>      .init : 0xc0c2b000 - 0xc1fe7000   (20208 kB)
>      .data : 0xc089aea5 - 0xc0c2a920   (3646 kB)
>      .text : 0xc0200000 - 0xc089aea5   (6763 kB)
>[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
>[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
>[    0.000000] Hierarchical RCU implementation.
>[    0.000000] 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
>[    0.000000] NR_IRQS:2304 nr_irqs:512 16
>[    0.000000] CPU 0 irqstacks, hard=f6008000 soft=f600a000
>[    0.000000] Console: colour VGA+ 80x25
>[    0.000000] console [tty0] enabled
>[    0.000000] hpet clockevent registered
>[    0.000000] spurious 8259A interrupt: IRQ7.
>[    0.000000] tsc: Fast TSC calibration using PIT
>[    0.000000] tsc: Detected 1662.416 MHz processor
>[    0.002002] Calibrating delay loop (skipped), value calculated using timer frequency.. 3324.83 BogoMIPS (lpj=1662416)
>[    0.003162] pid_max: default: 32768 minimum: 301
>[    0.003377] Security Framework initialized
>[    0.003544] Mount-cache hash table entries: 512
>[    0.004152] Disabled fast string operations
>[    0.004310] CPU: Physical Processor ID: 0
>[    0.004459] CPU: Processor Core ID: 0
>[    0.004607] mce: CPU supports 5 MCE banks
>[    0.004766] CPU0: Thermal monitoring enabled (TM2)
>[    0.004935] Last level iTLB entries: 4KB 32, 2MB 0, 4MB 0
>Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8
>tlb_flushall_shift: 6
>[    0.005238] Freeing SMP alternatives memory: 32K (c1fe7000 - c1fef000)
>[    0.005398] ACPI: Core revision 20131115
>[    0.011823] ACPI: All ACPI Tables successfully acquired
>[    0.012143] Enabling APIC mode:  Flat.  Using 1 I/O APICs
>[    0.012690] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
>[    0.022927] smpboot: CPU0: Intel(R) Atom(TM) CPU N450   @ 1.66GHz (fam: 06, model: 1c, stepping: 0a)
>[    0.024000] Performance Events: PEBS fmt0+, 8-deep LBR, Atom events, Intel PMU driver.
>[    0.024000] ... version:                3
>[    0.024000] ... bit width:              40
>[    0.024000] ... generic registers:      2
>[    0.024000] ... value mask:             000000ffffffffff
>[    0.024005] ... max period:             000000007fffffff
>[    0.024159] ... fixed-purpose events:   3
>[    0.024307] ... event mask:             0000000700000003
>[    0.025062] CPU 1 irqstacks, hard=f60a6000 soft=f60ac000
>[    0.025068] x86: Booting SMP configuration:
>[    0.003000] Initializing CPU#1
>[    0.003000] Disabled fast string operations
>[    0.025221] .... node  #0, CPUs:      #1
>[    0.037095] x86: Booted up 1 node, 2 CPUs
>[    0.038007] smpboot: Total of 2 processors activated (6649.66 BogoMIPS)
>[    0.039004] devtmpfs: initialized
>[    0.039828] PM: Registering ACPI NVS region [mem 0x7f3f8000-0x7f43dfff] (286720 bytes)
>[    0.040016] PM: Registering ACPI NVS region [mem 0x7f445000-0x7f447fff] (12288 bytes)
>[    0.040274] PM: Registering ACPI NVS region [mem 0x7f46d000-0x7f476fff] (40960 bytes)
>[    0.040531] PM: Registering ACPI NVS region [mem 0x7f498000-0x7f49efff] (28672 bytes)
>[    0.041137] xor: measuring software checksum speed
>[    0.050509]    pIII_sse  :  5180.000 MB/sec
>[    0.060508]    prefetch64-sse:  5772.000 MB/sec
>[    0.060662] xor: using function: prefetch64-sse (5772.000 MB/sec)
>[    0.060842] RTC time: 19:06:10, date: 02/18/14
>[    0.061101] NET: Registered protocol family 16
>[    0.062074] cpuidle: using governor ladder
>[    0.062190] cpuidle: using governor menu
>[    0.062509] ACPI: bus type PCI registered
>[    0.063102] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
>[    0.063321] PCI: not using MMCONFIG
>[    0.085053] PCI: Using configuration type 1 for base access
>[    0.122189] bio: create slab <bio-0> at 0
>[    0.140098] raid6: mmxx1      382 MB/s
>[    0.157034] raid6: mmxx2      742 MB/s
>[    0.174039] raid6: sse1x1     308 MB/s
>[    0.191041] raid6: sse1x2     574 MB/s
>[    0.208019] raid6: sse2x1     613 MB/s
>[    0.225020] raid6: sse2x2    1140 MB/s
>[    0.225170] raid6: using algorithm sse2x2 (1140 MB/s)
>[    0.225323] raid6: using ssse3x1 recovery algorithm
>[    0.225520] ACPI: Added _OSI(Module Device)
>[    0.225520] ACPI: Added _OSI(Processor Device)
>[    0.225520] ACPI: Added _OSI(3.0 _SCP Extensions)
>[    0.226013] ACPI: Added _OSI(Processor Aggregator Device)
>[    0.229711] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
>[    0.230287] ACPI Error: No handler for Region [EC__] (f6034ae0) [EmbeddedControl] (20131115/evregion-162)
>[    0.230639] ACPI Error: Region EmbeddedControl (ID=3) has no handler (20131115/exfldio-299)
>[    0.230982] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SBRG.EC__._REG] (Node f60362a0), AE_NOT_EXIST (20131115/psparse-536)
>[    0.232610] ACPI: Executed 1 blocks of module-level executable AML code
>[    0.238268] ACPI: SSDT 7f46e918 000444 (v01    AMI      IST 00000001 MSFT 03000001)
>[    0.240083] ACPI: Dynamic OEM Table Load:
>[    0.240316] ACPI: SSDT   (null) 000444 (v01    AMI      IST 00000001 MSFT 03000001)
>[    0.242239] ACPI: Interpreter enabled
>[    0.242429] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
>[    0.242799] ACPI: (supports S0 S1 S3 S4 S5)
>[    0.243009] ACPI: Using IOAPIC for interrupt routing
>[    0.243221] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
>[    0.246443] [Firmware Info]: PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] not reserved in ACPI motherboard resources
>[    0.246713] PCI: not using MMCONFIG
>[    0.247050] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>[    0.247566] ACPI: No dock devices found.
>[    0.268082] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
>[    0.268258] acpi PNP0A08:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
>[    0.268635] acpi PNP0A08:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
>[    0.269094] acpi PNP0A08:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
>[    0.269440] PCI host bridge to bus 0000:00
>[    0.270011] pci_bus 0000:00: root bus resource [bus 00-ff]
>[    0.270169] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
>[    0.270329] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
>[    0.270493] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
>[    0.270657] pci_bus 0000:00: root bus resource [mem 0x7f700000-0xffffffff]
>[    0.270834] pci 0000:00:00.0: [8086:a010] type 00 class 0x060000
>[    0.271165] pci 0000:00:02.0: [8086:a011] type 00 class 0x030000
>[    0.271165] pci 0000:00:02.0: reg 0x10: [mem 0xfea80000-0xfeafffff]
>[    0.271165] pci 0000:00:02.0: reg 0x14: [io  0xf0f0-0xf0f7]
>[    0.271165] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff pref]
>[    0.271165] pci 0000:00:02.0: reg 0x1c: [mem 0xfe700000-0xfe7fffff]
>[    0.271280] pci 0000:00:02.1: [8086:a012] type 00 class 0x038000
>[    0.271280] pci 0000:00:02.1: reg 0x10: [mem 0xfea00000-0xfea7ffff]
>[    0.271280] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
>[    0.271280] pci 0000:00:1b.0: reg 0x10: [mem 0xfeb00000-0xfeb03fff 64bit]
>[    0.272019] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>[    0.272171] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
>[    0.272173] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>[    0.272274] pci 0000:00:1c.0: System wakeup disabled by ACPI
>[    0.272503] pci 0000:00:1c.3: [8086:27d6] type 01 class 0x060400
>[    0.272503] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
>[    0.272503] pci 0000:00:1c.3: System wakeup disabled by ACPI
>[    0.273077] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
>[    0.273122] pci 0000:00:1d.0: reg 0x20: [io  0xf080-0xf09f]
>[    0.273287] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
>[    0.273287] pci 0000:00:1d.1: reg 0x20: [io  0xf060-0xf07f]
>[    0.273287] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
>[    0.273287] pci 0000:00:1d.2: reg 0x20: [io  0xf040-0xf05f]
>[    0.274141] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
>[    0.274141] pci 0000:00:1d.3: reg 0x20: [io  0xf020-0xf03f]
>[    0.274282] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
>[    0.274282] pci 0000:00:1d.7: reg 0x10: [mem 0xfeb05000-0xfeb053ff]
>[    0.274282] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>[    0.274362] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
>[    0.275093] pci 0000:00:1e.0: System wakeup disabled by ACPI
>[    0.275318] pci 0000:00:1f.0: [8086:27bc] type 00 class 0x060100
>[    0.275318] pci 0000:00:1f.2: [8086:27c0] type 00 class 0x01018f
>[    0.275318] pci 0000:00:1f.2: reg 0x10: [io  0xf0e0-0xf0e7]
>[    0.275318] pci 0000:00:1f.2: reg 0x14: [io  0xf0d0-0xf0d3]
>[    0.275318] pci 0000:00:1f.2: reg 0x18: [io  0xf0c0-0xf0c7]
>[    0.275318] pci 0000:00:1f.2: reg 0x1c: [io  0xf0b0-0xf0b3]
>[    0.275318] pci 0000:00:1f.2: reg 0x20: [io  0xf0a0-0xf0af]
>[    0.275318] pci 0000:00:1f.2: reg 0x24: [mem 0xfeb04000-0xfeb043ff]
>[    0.275318] pci 0000:00:1f.2: PME# supported from D3hot
>[    0.276062] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
>[    0.276116] pci 0000:00:1f.3: reg 0x20: [io  0xf000-0xf01f]
>[    0.276284] pci 0000:01:00.0: [1814:3090] type 00 class 0x028000
>[    0.276284] pci 0000:01:00.0: reg 0x10: [mem 0xfe900000-0xfe90ffff]
>[    0.278027] pci 0000:00:1c.0: PCI bridge to [bus 01]
>[    0.278192] pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
>[    0.278201] pci 0000:00:1c.0:   bridge window [mem 0xfe900000-0xfe9fffff]
>[    0.278214] pci 0000:00:1c.0:   bridge window [mem 0x7f700000-0x7f8fffff 64bit pref]
>[    0.278317] pci 0000:02:00.0: [10ec:8136] type 00 class 0x020000
>[    0.278317] pci 0000:02:00.0: reg 0x10: [io  0xe000-0xe0ff]
>[    0.278317] pci 0000:02:00.0: reg 0x18: [mem 0xe0010000-0xe0010fff 64bit pref]
>[    0.278317] pci 0000:02:00.0: reg 0x20: [mem 0xe0000000-0xe000ffff 64bit pref]
>[    0.278317] pci 0000:02:00.0: reg 0x30: [mem 0xfe800000-0xfe81ffff pref]
>[    0.278317] pci 0000:02:00.0: supports D1 D2
>[    0.278317] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>[    0.280027] pci 0000:00:1c.3: PCI bridge to [bus 02]
>[    0.280189] pci 0000:00:1c.3:   bridge window [io  0xe000-0xefff]
>[    0.280199] pci 0000:00:1c.3:   bridge window [mem 0xfe800000-0xfe8fffff]
>[    0.280211] pci 0000:00:1c.3:   bridge window [mem 0xe0000000-0xe00fffff 64bit pref]
>[    0.280294] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode)
>[    0.280294] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
>[    0.280294] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
>[    0.280294] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
>[    0.280294] pci 0000:00:1e.0:   bridge window [mem 0x7f700000-0xffffffff] (subtractive decode)
>[    0.280323] pci_bus 0000:00: on NUMA node 0
>[    0.282162] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>[    0.282954] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>[    0.283912] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
>[    0.284695] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>[    0.285527] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>[    0.286492] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>[    0.287454] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>[    0.288451] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>[    0.289194] ACPI: Enabled 2 GPEs in block 00 to 1F
>[    0.289329] ACPI: \_SB_.PCI0: notify handler is installed
>[    0.289433] Found 1 acpi root devices
>[    0.289524] ACPI : EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
>[    0.290077] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
>[    0.290311] vgaarb: loaded
>[    0.290456] vgaarb: bridge control possible 0000:00:02.0
>[    0.291198] SCSI subsystem initialized
>[    0.291237] libata version 3.00 loaded.
>[    0.292057] ACPI: bus type USB registered
>[    0.292214] usbcore: registered new interface driver usbfs
>[    0.292232] usbcore: registered new interface driver hub
>[    0.293035] usbcore: registered new device driver usb
>[    0.293210] pps_core: LinuxPPS API ver. 1 registered
>[    0.293210] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
>[    0.294009] PTP clock support registered
>[    0.294072] PCI: Using ACPI for IRQ routing
>[    0.294190] PCI: pci_cache_line_size set to 64 bytes
>[    0.294261] Expanded resource reserved due to conflict with PCI Bus 0000:01
>[    0.294424] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
>[    0.294431] e820: reserve RAM buffer [mem 0x7f3f8000-0x7fffffff]
>[    0.294436] e820: reserve RAM buffer [mem 0x7f46d000-0x7fffffff]
>[    0.294441] e820: reserve RAM buffer [mem 0x7f600000-0x7fffffff]
>[    0.295163] NetLabel: Initializing
>[    0.295163] NetLabel:  domain hash size = 128
>[    0.295163] NetLabel:  protocols = UNLABELED CIPSOv4
>[    0.295335] NetLabel:  unlabeled traffic allowed by default
>[    0.295673] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
>[    0.295840] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>[    0.296226] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
>[    0.299036] Switched to clocksource hpet
>[    0.299350] pnp: PnP ACPI init
>[    0.299532] ACPI: bus type PNP registered
>[    0.299882] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
>[    0.300086] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
>[    0.300307] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
>[    0.300786] system 00:02: [io  0x0800-0x087f] could not be reserved
>[    0.300950] system 00:02: [io  0x0480-0x04bf] has been reserved
>[    0.301140] system 00:02: [mem 0xfec00000-0xfec00fff] could not be reserved
>[    0.301306] system 00:02: [mem 0xfee00000-0xfee00fff] has been reserved
>[    0.301467] system 00:02: [mem 0xfed1c000-0xfed1ffff] has been reserved
>[    0.301628] system 00:02: [mem 0xfed20000-0xfed8ffff] has been reserved
>[    0.301790] system 00:02: [mem 0xfff00000-0xffffffff] has been reserved
>[    0.301954] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.301991] pnp 00:03: [dma 4]
>[    0.302136] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
>[    0.302365] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
>[    0.302502] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
>[    0.302703] system 00:06: [io  0x04d0-0x04d1] has been reserved
>[    0.302867] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.303049] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
>[    0.303249] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
>[    0.303464] pnp 00:09: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
>[    0.304365] pnp 00:0a: Plug and Play ACPI device, IDs PNP0103 (active)
>[    0.304732] pnp: PnP ACPI: found 11 devices
>[    0.304887] ACPI: bus type PNP unregistered
>[    0.351132] pci 0000:00:1c.0: PCI bridge to [bus 01]
>[    0.351299] pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
>[    0.351462] pci 0000:00:1c.0:   bridge window [mem 0xfe900000-0xfe9fffff]
>[    0.351626] pci 0000:00:1c.0:   bridge window [mem 0x7f700000-0x7f8fffff 64bit pref]
>[    0.351887] pci 0000:00:1c.3: PCI bridge to [bus 02]
>[    0.352071] pci 0000:00:1c.3:   bridge window [io  0xe000-0xefff]
>[    0.352237] pci 0000:00:1c.3:   bridge window [mem 0xfe800000-0xfe8fffff]
>[    0.352402] pci 0000:00:1c.3:   bridge window [mem 0xe0000000-0xe00fffff 64bit pref]
>[    0.352666] pci 0000:00:1e.0: PCI bridge to [bus 03]
>[    0.352835] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
>[    0.352841] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
>[    0.352848] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
>[    0.352854] pci_bus 0000:00: resource 7 [mem 0x7f700000-0xffffffff]
>[    0.352861] pci_bus 0000:01: resource 0 [io  0x1000-0x1fff]
>[    0.352867] pci_bus 0000:01: resource 1 [mem 0xfe900000-0xfe9fffff]
>[    0.352874] pci_bus 0000:01: resource 2 [mem 0x7f700000-0x7f8fffff 64bit pref]
>[    0.352881] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
>[    0.352887] pci_bus 0000:02: resource 1 [mem 0xfe800000-0xfe8fffff]
>[    0.352894] pci_bus 0000:02: resource 2 [mem 0xe0000000-0xe00fffff 64bit pref]
>[    0.352901] pci_bus 0000:03: resource 4 [io  0x0000-0x0cf7]
>[    0.352907] pci_bus 0000:03: resource 5 [io  0x0d00-0xffff]
>[    0.352913] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
>[    0.352920] pci_bus 0000:03: resource 7 [mem 0x7f700000-0xffffffff]
>[    0.352993] NET: Registered protocol family 2
>[    0.353477] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
>[    0.353673] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
>[    0.353884] TCP: Hash tables configured (established 8192 bind 8192)
>[    0.354115] TCP: reno registered
>[    0.354269] UDP hash table entries: 512 (order: 2, 16384 bytes)
>[    0.354440] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
>[    0.354722] NET: Registered protocol family 1
>[    0.355087] RPC: Registered named UNIX socket transport module.
>[    0.355245] RPC: Registered udp transport module.
>[    0.355396] RPC: Registered tcp transport module.
>[    0.355548] RPC: Registered tcp NFSv4.1 backchannel transport module.
>[    0.355724] pci 0000:00:02.0: Boot video device
>[    0.356665] PCI: CLS 64 bytes, default 64
>[    1.371130] audit: initializing netlink socket (disabled)
>[    1.371311] type=2000 audit(1392750371.370:1): initialized
>[    1.430705] bounce pool size: 64 pages
>[    1.430869] HugeTLB registered 4 MB page size, pre-allocated 0 pages
>[    1.439496] VFS: Disk quotas dquot_6.5.2
>[    1.439830] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>[    1.442865] NFS: Registering the id_resolver key type
>[    1.443075] Key type id_resolver registered
>[    1.443227] Key type id_legacy registered
>[    1.443382] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>[    1.443943] fuse init (API version 7.22)
>[    1.444820] bio: create slab <bio-1> at 1
>[    1.445913] Btrfs loaded
>[    1.446104] msgmni has been set to 1680
>[    1.447141] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
>[    1.447400] io scheduler noop registered
>[    1.447550] io scheduler deadline registered
>[    1.447970] io scheduler cfq registered (default)
>[    1.448944] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>[    1.450134] Monitor-Mwait will be used to enter C-1 state
>[    1.450157] Monitor-Mwait will be used to enter C-2 state
>[    1.450177] Monitor-Mwait will be used to enter C-3 state
>[    1.450191] tsc: Marking TSC unstable due to TSC halts in idle
>[    1.450369] ACPI: acpi_idle registered with cpuidle
>[    1.453226] thermal LNXTHERM:00: registered as thermal_zone0
>[    1.453389] ACPI: Thermal Zone [THRM] (61 C)
>[    1.453842] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>[    1.456298] Non-volatile memory driver v1.3
>[    1.456469] Linux agpgart interface v0.103
>[    1.456923] agpgart-intel 0000:00:00.0: Intel GMA3150 Chipset
>[    1.457271] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
>[    1.457728] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
>[    1.458285] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
>[    1.465520] brd: module loaded
>[    1.466771] Loading iSCSI transport class v2.0-870.
>[    1.468712] iscsi: registered transport (tcp)
>[    1.469352] Adaptec aacraid driver 1.2-0[30200]-ms
>[    1.469841] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
>[    1.470552] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.06.00.08-k.
>[    1.471088] iscsi: registered transport (qla4xxx)
>[    1.471357] QLogic iSCSI HBA Driver
>[    1.471508] Emulex LightPulse Fibre Channel SCSI driver 8.3.43
>[    1.471663] Copyright(c) 2004-2013 Emulex.  All rights reserved.
>[    1.472447] DC390: clustering now enabled by default. If you get problems load
>[    1.472704]        with "disable_clustering=1" and report to maintainers
>[    1.473123] GDT-HA: Storage RAID Controller Driver. Version: 3.05
>[    1.473631] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
>[    1.474002] RocketRAID 3xxx/4xxx Controller driver v1.8
>[    1.474366] stex: Promise SuperTrak EX Driver version: 4.6.0000.4
>[    1.474788] st: Version 20101219, fixed bufsize 32768, s/g segs 256
>[    1.475191] osst :I: Tape driver with OnStream support version 0.99.4
>osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
>[    1.476152] SCSI Media Changer driver v0.25 
>[    1.477325] ata_piix 0000:00:1f.2: version 2.13
>[    1.477461] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
>[    1.480864] scsi0 : ata_piix
>[    1.481416] scsi1 : ata_piix
>[    1.481834] ata1: SATA max UDMA/133 cmd 0xf0e0 ctl 0xf0d0 bmdma 0xf0a0 irq 19
>[    1.481999] ata2: SATA max UDMA/133 cmd 0xf0c0 ctl 0xf0b0 bmdma 0xf0a8 irq 19
>[    1.488851] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.18 (Sept 01, 2013)
>[    1.489218] bnx2x: Broadcom NetXtreme II 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.78.17-0 (2013/04/11)
>[    1.489821] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
>[    1.489983] e100: Copyright(c) 1999-2006 Intel Corporation
>[    1.490319] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
>[    1.490483] e1000: Copyright (c) 1999-2006 Intel Corporation.
>[    1.490778] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
>[    1.490937] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
>[    1.491263] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.5-k
>[    1.491427] igb: Copyright (c) 2007-2013 Intel Corporation.
>[    1.491824] usbcore: registered new interface driver zd1201
>[    1.492171] usbcore: registered new interface driver catc
>[    1.495141] usbcore: registered new interface driver kaweth
>[    1.495300] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
>[    1.495665] usbcore: registered new interface driver pegasus
>[    1.495934] usbcore: registered new interface driver rtl8150
>[    1.496269] usbcore: registered new interface driver asix
>[    1.496541] usbcore: registered new interface driver ax88179_178a
>[    1.496812] usbcore: registered new interface driver cdc_ether
>[    1.497100] usbcore: registered new interface driver r815x
>[    1.497368] usbcore: registered new interface driver dm9601
>[    1.497636] usbcore: registered new interface driver gl620a
>[    1.497903] usbcore: registered new interface driver net1080
>[    1.498231] usbcore: registered new interface driver plusb
>[    1.498507] usbcore: registered new interface driver rndis_host
>[    1.498782] usbcore: registered new interface driver cdc_subset
>[    1.499075] usbcore: registered new interface driver zaurus
>[    1.499357] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
>[    1.499746] usbcore: registered new interface driver cdc_ncm
>[    1.500548] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>[    1.500714] ehci-pci: EHCI PCI platform driver
>[    1.501082] ehci-pci 0000:00:1d.7: EHCI Host Controller
>[    1.501480] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
>[    1.501758] ehci-pci 0000:00:1d.7: debug port 1
>[    1.505816] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
>[    1.505860] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfeb05000
>[    1.512116] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
>[    1.512364] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>[    1.512528] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.512782] usb usb1: Product: EHCI Host Controller
>[    1.512937] usb usb1: Manufacturer: Linux 3.13.0_drm-intel-nightly_1be8f2_20140218+ ehci_hcd
>[    1.513210] usb usb1: SerialNumber: 0000:00:1d.7
>[    1.513875] hub 1-0:1.0: USB hub found
>[    1.514094] hub 1-0:1.0: 8 ports detected
>[    1.515217] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>[    1.515380] ohci-pci: OHCI PCI platform driver
>[    1.515665] uhci_hcd: USB Universal Host Controller Interface driver
>[    1.515979] uhci_hcd 0000:00:1d.0: UHCI Host Controller
>[    1.516400] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>[    1.516698] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000f080
>[    1.517102] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>[    1.517266] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.517520] usb usb2: Product: UHCI Host Controller
>[    1.517675] usb usb2: Manufacturer: Linux 3.13.0_drm-intel-nightly_1be8f2_20140218+ uhci_hcd
>[    1.517933] usb usb2: SerialNumber: 0000:00:1d.0
>[    1.518592] hub 2-0:1.0: USB hub found
>[    1.518778] hub 2-0:1.0: 2 ports detected
>[    1.519312] uhci_hcd 0000:00:1d.1: UHCI Host Controller
>[    1.519700] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>[    1.519996] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000f060
>[    1.520417] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>[    1.520581] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.520833] usb usb3: Product: UHCI Host Controller
>[    1.520986] usb usb3: Manufacturer: Linux 3.13.0_drm-intel-nightly_1be8f2_20140218+ uhci_hcd
>[    1.521261] usb usb3: SerialNumber: 0000:00:1d.1
>[    1.521930] hub 3-0:1.0: USB hub found
>[    1.522138] hub 3-0:1.0: 2 ports detected
>[    1.522669] uhci_hcd 0000:00:1d.2: UHCI Host Controller
>[    1.523089] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>[    1.523408] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000f040
>[    1.523791] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>[    1.523954] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.524248] usb usb4: Product: UHCI Host Controller
>[    1.524404] usb usb4: Manufacturer: Linux 3.13.0_drm-intel-nightly_1be8f2_20140218+ uhci_hcd
>[    1.524663] usb usb4: SerialNumber: 0000:00:1d.2
>[    1.525324] hub 4-0:1.0: USB hub found
>[    1.525507] hub 4-0:1.0: 2 ports detected
>[    1.526068] uhci_hcd 0000:00:1d.3: UHCI Host Controller
>[    1.526462] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
>[    1.526781] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000f020
>[    1.527200] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>[    1.527365] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.527619] usb usb5: Product: UHCI Host Controller
>[    1.527774] usb usb5: Manufacturer: Linux 3.13.0_drm-intel-nightly_1be8f2_20140218+ uhci_hcd
>[    1.528056] usb usb5: SerialNumber: 0000:00:1d.3
>[    1.528693] hub 5-0:1.0: USB hub found
>[    1.528875] hub 5-0:1.0: 2 ports detected
>[    1.529760] usbcore: registered new interface driver usb-storage
>[    1.530238] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
>[    1.553683] serio: i8042 KBD port at 0x60,0x64 irq 1
>[    1.553857] serio: i8042 AUX port at 0x60,0x64 irq 12
>[    1.554577] mousedev: PS/2 mouse device common for all mice
>[    1.555141] rtc_cmos 00:04: RTC can wake from S4
>[    1.555608] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
>[    1.555810] rtc_cmos 00:04: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
>[    1.556210] i2c /dev entries driver
>[    1.556672] hidraw: raw HID events driver (C) Jiri Kosina
>[    1.559249] usbcore: registered new interface driver usbhid
>[    1.559410] usbhid: USB HID core driver
>[    1.559687] TCP: cubic registered
>[    1.559849] Initializing XFRM netlink socket
>[    1.560064] NET: Registered protocol family 17
>[    1.560272] Key type dns_resolver registered
>[    1.561256] Using IPI No-Shortcut mode
>[    1.561963] registered taskstats version 1
>[    1.562670]   Magic number: 2:408:142
>[    1.562850] block ram7: hash matches
>[    1.563074] acpi device:13: hash matches
>[    1.563350] PM: Hibernation image not present or could not be loaded.
>[    1.563400] Warning: unable to open an initial console.
>[    1.578558] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
>[    2.005071] ata1.00: ATA-8: WDC WD1600BEVT-22ZCT0, 11.01A11, max UDMA/133
>[    2.005239] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
>[    2.012537] ata1.00: configured for UDMA/133
>[    2.012959] scsi 0:0:0:0: Direct-Access     ATA      WDC WD1600BEVT-2 11.0 PQ: 0 ANSI: 5
>[    2.013982] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
>[    2.014511] sd 0:0:0:0: [sda] Write Protect is off
>[    2.014677] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[    2.014728] sd 0:0:0:0: Attached scsi generic sg0 type 0
>[    2.014766] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    2.022705]  sda: sda1 sda2
>[    2.023904] sd 0:0:0:0: [sda] Attached SCSI disk
>[    2.040866] Freeing unused kernel memory: 20208K (c0c2b000 - c1fe7000)
>[    2.069120] usb 1-6: new high-speed USB device number 3 using ehci-pci
>[    2.154412] dracut: dracut-018-35.git20120510.fc17
>[    2.263911] udevd[1201]: starting version 182
>[    2.297995] usb 1-6: New USB device found, idVendor=5986, idProduct=02c1
>[    2.298211] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[    2.298392] usb 1-6: Product: BisonCam, NB Pro
>[    2.298563] usb 1-6: Manufacturer: BISON Corporation
>[    2.298734] usb 1-6: SerialNumber: 20090702
>[    2.323822] [drm] Initialized drm 1.1.0 20060810
>[    2.327104] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C09:00/PNP0C0D:00/input/input3
>[    2.330268] ACPI: Lid Switch [LID0]
>[    2.332999] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
>[    2.337323] ACPI: Power Button [PWRB]
>[    2.339328] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
>[    2.341539] ACPI: Power Button [PWRF]
>[    2.359684] [drm:i915_dump_device_info], i915 device info: gen=3, pciid=0xa011 flags=is_mobile,is_g33,need_gfx_hws,is_pineview,has_hotplug,has_overlay,
>[    2.359857] [drm:intel_detect_pch], No PCH found?
>[    2.359866] [drm] Memory usable by graphics device = 512M
>[    2.360102] [drm:i915_gem_gtt_init], GMADR size = 256M
>[    2.360109] [drm:i915_gem_gtt_init], GTT stolen size = 8M
>[    2.374756] [drm:intel_opregion_setup], graphic opregion physical addr: 0x7f445018
>[    2.374792] [drm:intel_opregion_setup], Public ACPI methods supported
>[    2.374799] [drm:intel_opregion_setup], SWSCI supported
>[    2.380064] [drm:swsci_setup], SWSCI GBDA callbacks 000004f3, SBCB callbacks 00000241
>[    2.380073] [drm:intel_opregion_setup], ASLE supported
>[    2.380160] i915 0000:00:02.0: irq 40 for MSI/MSI-X
>[    2.380188] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
>[    2.380382] [drm] Driver supports precise vblank timestamp query.
>[    2.380568] [drm:init_vbt_defaults], Set default to SSC at 100000 kHz
>[    2.380580] [drm:intel_parse_bios], Using VBT from OpRegion: $VBT PINEVIEW       d
>[    2.380591] [drm:parse_general_features], BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 1 lvds_ssc_freq 100000 display_clock_mode 0 fdi_rx_polarity_inverted 0
>[    2.380598] [drm:parse_general_definitions], crt_ddc_bus_pin: 2
>[    2.380609] [drm:parse_lfp_panel_data], Found panel mode in BIOS VBT tables:
>[    2.380620] [drm:drm_mode_debug_printmodeline], Modeline 0:"1024x600" 0 45000 1024 1072 1104 1200 600 603 609 625 0x8 0xa
>[    2.380628] [drm:parse_lfp_panel_data], VBT initial LVDS value 40300300
>[    2.380637] [drm:parse_lfp_backlight], VBT backlight PWM modulation frequency 200 Hz, active low, min brightness 0, level 0
>[    2.380647] [drm:parse_sdvo_panel_data], Found SDVO panel mode in BIOS VBT tables:
>[    2.380659] [drm:drm_mode_debug_printmodeline], Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
>[    2.380667] [drm:parse_sdvo_device_mapping], No SDVO device info is found in VBT
>[    2.380675] [drm:parse_mipi], No MIPI BDB found
>[    2.380695] [drm:intel_dsm_pci_probe], no _DSM method for intel device
>[    2.380716] [drm:i915_stolen_to_physical] *ERROR* conflict detected with stolen region: [0x7f800000 - 0x80000000]
>[    2.381141] [drm:intel_modeset_init], 2 display pipes available.
>[    2.381169] [drm:intel_modeset_init], pipe A sprite A init failed: -19
>[    2.381193] [drm:intel_modeset_init], pipe B sprite B init failed: -19
>[    2.381206] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
>[    2.405069] [drm:intel_lvds_init], using preferred mode from EDID: 
>[    2.405070] [drm:drm_mode_debug_printmodeline], Modeline 8:"1024x600" 60 45000 1024 1072 1104 1200 600 603 609 625 0x48 0xa
>[    2.405080] [drm:intel_lvds_init], detected single-link lvds configuration
>[    2.415736] [drm:intel_panel_setup_backlight], failed to setup backlight for connector LVDS-1
>[    2.418132] [drm:intel_modeset_readout_hw_state], [CRTC:3] hw state readout: disabled
>[    2.418153] [drm:intel_modeset_readout_hw_state], [CRTC:4] hw state readout: enabled
>[    2.418161] [drm:intel_modeset_readout_hw_state], [ENCODER:6:LVDS-6] hw state readout: enabled, pipe B
>[    2.418168] [drm:intel_modeset_readout_hw_state], [ENCODER:12:DAC-12] hw state readout: disabled, pipe A
>[    2.418175] [drm:intel_modeset_readout_hw_state], [CONNECTOR:5:LVDS-1] hw state readout: enabled
>[    2.418181] [drm:intel_modeset_readout_hw_state], [CONNECTOR:11:VGA-1] hw state readout: disabled
>[    2.418189] [drm:intel_dump_pipe_config], [CRTC:3][setup_hw_state] config for pipe A
>[    2.418193] [drm:intel_dump_pipe_config], cpu_transcoder: A
>[    2.418198] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0
>[    2.418204] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    2.418210] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    2.418214] [drm:intel_dump_pipe_config], requested mode:
>[    2.418222] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    2.418226] [drm:intel_dump_pipe_config], adjusted mode:
>[    2.418233] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    2.418240] [drm:intel_dump_crtc_timings], crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[    2.418244] [drm:intel_dump_pipe_config], port clock: 0
>[    2.418249] [drm:intel_dump_pipe_config], pipe src size: 0x0
>[    2.418254] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    2.418259] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    2.418264] [drm:intel_dump_pipe_config], ips: 0
>[    2.418268] [drm:intel_dump_pipe_config], double wide: 0
>[    2.418274] [drm:intel_dump_pipe_config], [CRTC:4][setup_hw_state] config for pipe B
>[    2.418278] [drm:intel_dump_pipe_config], cpu_transcoder: B
>[    2.418283] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0
>[    2.418289] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    2.418295] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    2.418299] [drm:intel_dump_pipe_config], requested mode:
>[    2.418306] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 640 0 0 0 400 0 0 0 0x0 0x0
>[    2.418310] [drm:intel_dump_pipe_config], adjusted mode:
>[    2.418317] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0xa
>[    2.418325] [drm:intel_dump_crtc_timings], crtc timings: 45000 1024 1072 1104 1200 600 603 609 625, type: 0x0 flags: 0xa
>[    2.418330] [drm:intel_dump_pipe_config], port clock: 45000
>[    2.418334] [drm:intel_dump_pipe_config], pipe src size: 640x400
>[    2.418340] [drm:intel_dump_pipe_config], gmch pfit: control: 0x80002668, ratios: 0x00000000, lvds border: 0x00000000
>[    2.418345] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    2.418349] [drm:intel_dump_pipe_config], ips: 0
>[    2.418353] [drm:intel_dump_pipe_config], double wide: 0
>[    2.418360] [drm:intel_connector_check_state], [CONNECTOR:5:LVDS-1]
>[    2.418366] [drm:check_encoder_state], [ENCODER:6:LVDS-6]
>[    2.418371] [drm:check_encoder_state], [ENCODER:12:DAC-12]
>[    2.418377] [drm:check_crtc_state], [CRTC:3]
>[    2.418382] [drm:check_crtc_state], [CRTC:4]
>[    2.418397] [drm:i915_gem_setup_global_gtt], clearing unused GTT space: [0, 1ffff000]
>[    2.419839] [drm:init_status_page], render ring hws offset: 0x00001000
>[    2.420141] [drm] initialized overlay support
>[    2.420309] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
>[    2.420315] [drm:intel_lvds_detect], [CONNECTOR:5:LVDS-1]
>[    2.420335] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
>[    2.420344] [drm:drm_mode_debug_printmodeline], Modeline 8:"1024x600" 60 45000 1024 1072 1104 1200 600 603 609 625 0x48 0xa
>[    2.420350] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
>[    2.420356] [drm:intel_crt_detect], [CONNECTOR:11:VGA-1] force=1
>[    2.433114] [drm:intel_crt_detect], CRT not detected via hotplug
>[    2.434115] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
>[    2.434121] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>[    2.434126] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[    2.434132] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
>[    2.434429] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>[    2.434434] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
>[    2.434439] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
>[    2.434445] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
>[    2.434450] [drm:drm_setup_crtcs], 
>[    2.434455] [drm:drm_enable_connectors], connector 5 enabled? yes
>[    2.434460] [drm:drm_enable_connectors], connector 11 enabled? no
>[    2.434465] [drm:intel_fb_initial_config], looking for cmdline mode on connector 5
>[    2.434470] [drm:intel_fb_initial_config], looking for preferred mode on connector 5
>[    2.434476] [drm:intel_fb_initial_config], connector LVDS-1 on crtc 4: 1024x600
>[    2.434480] [drm:intel_fb_initial_config], connector 11 not enabled, skipping
>[    2.434485] [drm:drm_setup_crtcs], desired mode 1024x600 set on crtc 4
>[    2.434492] [drm:intelfb_create], no BIOS fb, allocating a new one
>[    2.439061] [drm:intelfb_create], allocated 1024x600 fb: 0x00030000, bo f6390600
>[    2.439476] fbcon: inteldrmfb (fb0) is primary device
>[    2.441581] [drm:intel_crtc_set_config], [CRTC:3] [NOFB]
>[    2.441587] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
>[    2.441592] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4]
>[    2.441598] [drm:intel_crtc_set_config], [CRTC:4] [FB:14] #connectors=1 (x y) (0 0)
>[    2.441601] [drm:intel_set_config_compute_mode_changes], inactive crtc, full mode set
>[    2.441603] [drm:intel_set_config_compute_mode_changes], modes are different, full mode set
>[    2.441610] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    2.441616] [drm:drm_mode_debug_printmodeline], Modeline 13:"1024x600" 60 45000 1024 1072 1104 1200 600 603 609 625 0x48 0xa
>[    2.441619] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=1, fb_changed=0
>[    2.441623] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4]
>[    2.441628] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 2, prepare: 2, disable: 0
>[    2.441634] [drm:connected_sink_compute_bpp], [CONNECTOR:5:LVDS-1] checking for sink bpp constrains
>[    2.441640] [drm:intel_lvds_compute_config], forcing display bpp (was 24) to LVDS (18)
>[    2.441648] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 18, dithering: 1
>[    2.441651] [drm:intel_dump_pipe_config], [CRTC:4][modeset] config for pipe B
>[    2.441653] [drm:intel_dump_pipe_config], cpu_transcoder: B
>[    2.441655] [drm:intel_dump_pipe_config], pipe bpp: 18, dithering: 1
>[    2.441659] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    2.441663] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    2.441665] [drm:intel_dump_pipe_config], requested mode:
>[    2.441671] [drm:drm_mode_debug_printmodeline], Modeline 0:"1024x600" 60 45000 1024 1072 1104 1200 600 603 609 625 0x48 0xa
>[    2.441673] [drm:intel_dump_pipe_config], adjusted mode:
>[    2.441679] [drm:drm_mode_debug_printmodeline], Modeline 0:"1024x600" 60 45000 1024 1072 1104 1200 600 603 609 625 0x48 0xa
>[    2.441685] [drm:intel_dump_crtc_timings], crtc timings: 45000 1024 1072 1104 1200 600 603 609 625, type: 0x48 flags: 0xa
>[    2.441687] [drm:intel_dump_pipe_config], port clock: 45000
>[    2.441689] [drm:intel_dump_pipe_config], pipe src size: 1024x600
>[    2.441693] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000008, ratios: 0x00000000, lvds border: 0x00000000
>[    2.441696] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    2.441698] [drm:intel_dump_pipe_config], ips: 0
>[    2.441700] [drm:intel_dump_pipe_config], double wide: 0
>[    2.514147] usb 4-1: new full-speed USB device number 2 using uhci_hcd
>[    2.713117] [drm:i9xx_pfit_disable], disabling pfit, current: 0x80002668
>[    2.713124] [drm:pineview_update_wm], Self-refresh is disabled
>[    2.713131] [drm:i9xx_get_refclk], using SSC reference clock of 100000 kHz
>[    2.714831] [drm:i9xx_update_plane], Writing base 00030000 00000000 0 0 4096
>[    2.714837] [drm:intel_crtc_mode_set], [ENCODER:6:LVDS-6] set [MODE:0:1024x600]
>[    2.715533] [drm:intel_calculate_wm], FIFO entries required for mode: 10
>[    2.715535] [drm:intel_calculate_wm], FIFO watermark level: 492
>[    2.715538] [drm:pineview_update_wm], DSPFW1 register is f6030f0f
>[    2.715541] [drm:intel_calculate_wm], FIFO entries required for mode: 12
>[    2.715543] [drm:intel_calculate_wm], FIFO watermark level: 495
>[    2.715546] [drm:intel_calculate_wm], FIFO entries required for mode: 95
>[    2.715548] [drm:intel_calculate_wm], FIFO watermark level: 407
>[    2.715551] [drm:intel_calculate_wm], FIFO entries required for mode: 96
>[    2.715553] [drm:intel_calculate_wm], FIFO watermark level: 411
>[    2.715556] [drm:pineview_update_wm], DSPFW3 register is 3f3f0197
>[    2.715558] [drm:pineview_update_wm], Self-refresh is enabled
>[    2.723660] psmouse serio1: synaptics: Touchpad model: 1, fw: 6.5, id: 0x1c0b1, caps: 0xa04711/0xa00000/0x0, board id: 3655, fw id: 430020
>[    2.748665] usb 4-1: New USB device found, idVendor=0db0, idProduct=3801
>[    2.748671] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    2.808672] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2
>[    3.149125] [drm:intel_connector_check_state], [CONNECTOR:5:LVDS-1]
>[    3.149131] [drm:check_encoder_state], [ENCODER:6:LVDS-6]
>[    3.149135] [drm:check_encoder_state], [ENCODER:12:DAC-12]
>[    3.149138] [drm:check_crtc_state], [CRTC:3]
>[    3.149142] [drm:check_crtc_state], [CRTC:4]
>[    3.149200] [drm:intel_crtc_set_config], [CRTC:4] [FB:14] #connectors=1 (x y) (0 0)
>[    3.149207] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0
>[    3.149211] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4]
>[    3.156649] Console: switching to colour frame buffer device 128x37
>[    3.156660] [drm:intel_crtc_set_config], [CRTC:4] [FB:14] #connectors=1 (x y) (0 0)
>[    3.156664] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0
>[    3.156668] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4]
>[    3.165202] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
>[    3.165323] i915 0000:00:02.0: registered panic notifier
>[    3.171121] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
>[    3.174307] acpi device:20: registered as cooling_device2
>[    3.176000] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input6
>[    3.181414] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
>[    3.197931] dracut: Starting plymouth daemon
>[    3.224338] [drm:intel_crtc_set_config], [CRTC:4] [FB:14] #connectors=1 (x y) (0 0)
>[    3.224346] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0
>[    3.224351] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4]
>[    3.241411] [drm:i915_gem_open], 
>[    3.241450] [drm:intel_crtc_cursor_set], cursor off
>[    3.241456] [drm:intel_crtc_set_config], [CRTC:3] [NOFB]
>[    3.241464] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
>[    3.241471] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4]
>[    3.241477] [drm:intel_crtc_cursor_set], cursor off
>[    3.241483] [drm:intel_crtc_set_config], [CRTC:4] [FB:14] #connectors=1 (x y) (0 0)
>[    3.241491] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0
>[    3.241497] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4]
>[    3.241522] [drm:i915_gem_open], 
>[    3.241543] [drm:intel_crtc_cursor_set], cursor off
>[    3.241549] [drm:intel_crtc_set_config], [CRTC:3] [NOFB]
>[    3.241555] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
>[    3.241561] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4]
>[    3.241565] [drm:intel_crtc_cursor_set], cursor off
>[    3.241571] [drm:intel_crtc_set_config], [CRTC:4] [FB:14] #connectors=1 (x y) (0 0)
>[    3.241577] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0
>[    3.241583] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4]
>[    3.241607] [drm:i915_gem_open], 
>[    3.241773] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[2] ENCODERS[2]
>[    3.241783] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[2] ENCODERS[2]
>[    3.241801] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[    3.241809] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
>[    3.241814] [drm:intel_lvds_detect], [CONNECTOR:5:LVDS-1]
>[    3.241834] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
>[    3.241844] [drm:drm_mode_debug_printmodeline], Modeline 8:"1024x600" 60 45000 1024 1072 1104 1200 600 603 609 625 0x48 0xa
>[    3.241852] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[    3.246906] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
>[    3.246919] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
>[    3.246925] [drm:intel_crt_detect], [CONNECTOR:11:VGA-1] force=1
>[    3.260111] [drm:intel_crt_detect], CRT not detected via hotplug
>[    3.261113] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
>[    3.261124] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>[    3.261135] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[    3.261141] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
>[    3.261427] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>[    3.261432] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
>[    3.261437] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
>[    3.261443] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
>[    3.261457] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
>[    3.261463] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
>[    3.261469] [drm:intel_crt_detect], [CONNECTOR:11:VGA-1] force=1
>[    3.275112] [drm:intel_crt_detect], CRT not detected via hotplug
>[    3.276111] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
>[    3.276121] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>[    3.276133] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[    3.276138] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
>[    3.276422] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>[    3.276428] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
>[    3.276432] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
>[    3.276438] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
>[    3.591466] ACPI: AC Adapter [ADP1] (on-line)
>[    3.641345] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
>[    3.645550] r8169 0000:02:00.0: irq 41 for MSI/MSI-X
>[    3.673525] r8169 0000:02:00.0 eth0: RTL8102e at 0xf8436000, 40:61:86:1a:f7:ec, XID 04c00000 IRQ 41
>[    3.680202] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
>[    3.680324] input: PC Speaker as /devices/platform/pcspkr/input/input7
>[    3.694848] iTCO_vendor_support: vendor-support=0
>[    3.706669] ACPI: Battery Slot [BAT1] (battery present)
>[    3.706847] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
>[    3.706903] iTCO_wdt: Found a NM10 TCO device (Version=2, TCOBASE=0x0860)
>[    3.707594] snd_hda_intel 0000:00:1b.0: irq 42 for MSI/MSI-X
>[    3.752058] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>[    3.772944] ALSA sound/pci/hda/patch_realtek.c:419 SKU: Nid=0x1d sku_cfg=0x4006922d
>[    3.772954] ALSA sound/pci/hda/patch_realtek.c:421 SKU: port_connectivity=0x1
>[    3.772961] ALSA sound/pci/hda/patch_realtek.c:422 SKU: enable_pcbeep=0x0
>[    3.772968] ALSA sound/pci/hda/patch_realtek.c:423 SKU: check_sum=0x00000006
>[    3.772975] ALSA sound/pci/hda/patch_realtek.c:424 SKU: customization=0x00000092
>[    3.772981] ALSA sound/pci/hda/patch_realtek.c:425 SKU: external_amp=0x5
>[    3.772988] ALSA sound/pci/hda/patch_realtek.c:426 SKU: platform_type=0x1
>[    3.772994] ALSA sound/pci/hda/patch_realtek.c:427 SKU: swap=0x0
>[    3.773000] ALSA sound/pci/hda/patch_realtek.c:428 SKU: override=0x1
>[    3.773298] ALSA sound/pci/hda/hda_auto_parser.c:393 autoconfig: line_outs=1 (0x1b/0x0/0x0/0x0/0x0) type:speaker
>[    3.773308] ALSA sound/pci/hda/hda_auto_parser.c:397    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>[    3.773317] ALSA sound/pci/hda/hda_auto_parser.c:401    hp_outs=1 (0x14/0x0/0x0/0x0/0x0)
>[    3.773323] ALSA sound/pci/hda/hda_auto_parser.c:402    mono: mono_out=0x0
>[    3.773329] ALSA sound/pci/hda/hda_auto_parser.c:406    inputs:
>[    3.773337] ALSA sound/pci/hda/hda_auto_parser.c:410      Internal Mic=0x19
>[    3.773345] ALSA sound/pci/hda/hda_auto_parser.c:410      Mic=0x18
>[    3.773353] ALSA sound/pci/hda/patch_realtek.c:491 realtek: No valid SSID, checking pincfg 0x4006922d for NID 0x1d
>[    3.773361] ALSA sound/pci/hda/patch_realtek.c:507 realtek: Enabling init ASM_ID=0x922d CODEC_ID=10ec0662
>[    3.774847] msi_laptop: Identified laptop model 'MSI N014'
>[    3.780892] msi_laptop: Brightness ignored, must be controlled by ACPI video driver
>[    3.800459] input: MSI Laptop hotkeys as /devices/virtual/input/input8
>[    3.805590] wmi: Mapper loaded
>[    3.811057] msi_laptop: driver 0.5 successfully loaded
>[    3.990947] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
>[    4.123882] random: nonblocking pool is initialized
>[    4.186643] dracut: Checking ext4: /dev/sda2
>[    4.191122] dracut: issuing e2fsck -a  /dev/sda2
>[    4.371854] dracut: /dev/sda2: clean, 763462/9641984 files, 15126773/38558720 blocks
>[    4.376980] dracut: Remounting /dev/sda2 with -o ro
>[    4.424524] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
>[    4.531790] dracut: Mounted root filesystem /dev/sda2
>[    4.690638] device-mapper: uevent: version 1.0.3
>[    4.695330] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
>[    4.837639] dracut: Switching root
>[    5.737734] systemd[1]: systemd 204 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
>[    5.942040] systemd[1]: Failed to insert module 'ipv6'
>[    6.012697] systemd[1]: Set hostname to <x-pnv2>.
>[    6.421864] LVM: Logical Volume autoactivation enabled.
>[    6.425522] LVM: Activation generator successfully completed.
>[    7.616213] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
>[    7.620067] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
>[    7.623767] systemd[1]: Starting Syslog Socket.
>[    7.627618] systemd[1]: Listening on Syslog Socket.
>[    7.627753] systemd[1]: Starting Replay Read-Ahead Data...
>[    7.636503] systemd[1]: Starting Collect Read-Ahead Data...
>[    7.644893] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
>[    7.652109] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
>[    7.652179] systemd[1]: Starting Delayed Shutdown Socket.
>[    7.654642] systemd-readahead[2266]: Bumped block_nr parameter of 8:0 to 20480. This is a temporary hack and should be removed one day.
>[    7.657485] systemd-readahead[2267]: Failed to create fanotify object: Function not implemented
>[    7.672417] systemd[1]: Listening on Delayed Shutdown Socket.
>[    7.672495] systemd[1]: Starting Encrypted Volumes.
>[    7.684328] systemd[1]: Reached target Encrypted Volumes.
>[    7.684607] systemd[1]: Starting udev Kernel Socket.
>[    7.695532] systemd[1]: Listening on udev Kernel Socket.
>[    7.695766] systemd[1]: Starting udev Control Socket.
>[    7.703178] systemd[1]: Listening on udev Control Socket.
>[    7.703335] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
>[    7.714563] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
>[    7.714665] systemd[1]: Starting Journal Socket.
>[    7.722209] systemd[1]: Listening on Journal Socket.
>[    7.722359] systemd[1]: Mounting Huge Pages File System...
>[    7.733891] systemd[1]: Mounting Debug File System...
>[    7.741894] systemd[1]: Starting Create static device nodes in /dev...
>[    7.751273] systemd[1]: Starting udev Coldplug all Devices...
>[    7.758489] systemd[1]: Starting Journal Service...
>[    7.766929] systemd[1]: Started Journal Service.
>[    7.768142] systemd[1]: Mounting POSIX Message Queue File System...
>[    7.779380] systemd[1]: Starting LVM2 metadata daemon socket.
>[    7.786143] systemd[1]: Listening on LVM2 metadata daemon socket.
>[    7.786228] systemd[1]: Starting Device-mapper event daemon FIFOs.
>[    7.793461] systemd[1]: Listening on Device-mapper event daemon FIFOs.
>[    7.793514] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
>[    7.805695] systemd[1]: Expecting device dev-disk-by\x2duuid-7096f098\x2daaba\x2d44e6\x2db8f0\x2dbc6243220e51.device...
>[    7.812612] systemd[1]: Mounting Temporary Directory...
>[    8.333325] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway.
>[    8.340066] systemd[1]: Started Replay Read-Ahead Data.
>[    8.344890] systemd[1]: systemd-readahead-collect.service: main process exited, code=exited, status=1/FAILURE
>[    8.352428] systemd[1]: Started Collect Read-Ahead Data.
>[    8.357995] systemd[1]: Starting Load legacy module configuration...
>[    8.366932] systemd[1]: Started File System Check on Root Device.
>[    8.368540] systemd[1]: Starting Remount Root and Kernel File Systems...
>[    8.491594] systemd[1]: Starting Apply Kernel Variables...
>[    8.502345] systemd[1]: Starting Setup Virtual Console...
>[    8.607866] systemd[1]: Started Load Kernel Modules.
>[    8.612172] systemd[1]: Mounting FUSE Control File System...
>[    8.617862] systemd[1]: Mounted Configuration File System.
>[    8.682372] systemd[1]: Started Set Up Additional Binary Formats.
>[    9.168131] systemd[1]: Mounted FUSE Control File System.
>[    9.186782] systemd[1]: Mounted Temporary Directory.
>[    9.191588] systemd[1]: Mounted Debug File System.
>[    9.199958] systemd[1]: Mounted Huge Pages File System.
>[    9.208134] systemd[1]: Mounted POSIX Message Queue File System.
>[    9.278321] systemd[1]: Starting LVM2 metadata daemon...
>[    9.460754] EXT4-fs (sda2): re-mounted. Opts: (null)
>[    9.466291] systemd[1]: Started Remount Root and Kernel File Systems.
>[    9.471092] systemd[1]: Started Import network configuration from initramfs.
>[    9.474916] systemd[1]: Starting Configure read-only root support...
>[    9.525269] systemd[1]: Started Create static device nodes in /dev.
>[    9.529671] systemd[1]: Starting udev Kernel Device Manager...
>[    9.745487] systemd-udevd[2720]: starting version 204
>[   11.528949] type=1305 audit(1392750381.527:2): audit_pid=3079 old=0 auid=4294967295 ses=4294967295 res=1
>[   14.933162] systemd-udevd[3098]: renamed network interface p1p1 to enp2s0
>[   15.834398] Adding 2047996k swap on /dev/sda1.  Priority:-1 extents:1 across:2047996k 
>[   22.802220] r8169 0000:02:00.0 enp2s0: link down
>[   22.802249] r8169 0000:02:00.0 enp2s0: link down
>[   24.417335] r8169 0000:02:00.0 enp2s0: link up
>[   26.335905] NET: Registered protocol family 10
>[   26.855836] [drm:intel_crtc_cursor_set], cursor off
>[   26.855847] [drm:intel_crtc_set_config], [CRTC:3] [NOFB]
>[   26.855859] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
>[   26.855869] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4]
>[   26.855877] [drm:intel_crtc_cursor_set], cursor off
>[   26.855886] [drm:intel_crtc_set_config], [CRTC:4] [FB:14] #connectors=1 (x y) (0 0)
>[   26.855896] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0
>[   26.855904] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4]
>[   27.140693] systemd[1]: PID file /run/sendmail.pid not readable (yet?) after start.
>[   31.693708] Bridge firewalling registered
>[   33.414128] ip_tables: (C) 2000-2006 Netfilter Core Team
>[   33.532593] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>[   34.800218] Ebtables v2.0 registered
>[   34.845499] ip6_tables: (C) 2000-2006 Netfilter Core Team
>[  354.406137] [drm:i915_gem_open], 
>[  354.406192] [drm:intel_crtc_cursor_set], cursor off
>[  354.406202] [drm:intel_crtc_set_config], [CRTC:3] [NOFB]
>[  354.406212] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
>[  354.406221] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4]
>[  354.406229] [drm:intel_crtc_cursor_set], cursor off
>[  354.406238] [drm:intel_crtc_set_config], [CRTC:4] [FB:14] #connectors=1 (x y) (0 0)
>[  354.406248] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0
>[  354.406256] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4]
>[  354.406288] [drm:i915_gem_open], 
>[  354.406789] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[2] ENCODERS[2]
>[  354.406817] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[2] ENCODERS[2]
>[  354.406860] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[2] ENCODERS[2]
>[  354.406869] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[2] ENCODERS[2]
>[  354.406881] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[  354.406889] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
>[  354.406895] [drm:intel_lvds_detect], [CONNECTOR:5:LVDS-1]
>[  354.406915] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
>[  354.406925] [drm:drm_mode_debug_printmodeline], Modeline 8:"1024x600" 60 45000 1024 1072 1104 1200 600 603 609 625 0x48 0xa
>[  354.406935] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[  354.406955] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[2] ENCODERS[2]
>[  354.406965] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[2] ENCODERS[2]
>[  354.406992] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[2] ENCODERS[2]
>[  354.407002] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[2] ENCODERS[2]
>[  354.408083] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
>[  354.408096] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
>[  354.408105] [drm:intel_crt_detect], [CONNECTOR:11:VGA-1] force=1
>[  354.422042] [drm:intel_crt_detect], CRT not detected via hotplug
>[  354.423167] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
>[  354.423177] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>[  354.423186] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[  354.423195] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
>[  354.423499] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>[  354.423510] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
>[  354.423518] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
>[  354.423528] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
>[  354.423552] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
>[  354.423562] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
>[  354.423570] [drm:intel_crt_detect], [CONNECTOR:11:VGA-1] force=1
>[  354.437115] [drm:intel_crt_detect], CRT not detected via hotplug
>[  354.438234] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
>[  354.438245] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>[  354.438252] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[  354.438260] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
>[  354.438560] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>[  354.438570] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
>[  354.438577] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
>[  354.438587] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
>[  354.438676] [drm:drm_mode_addfb2], [FB:15]
>[  354.456407] [drm:drm_mode_addfb2], [FB:16]
>[  354.456476] [drm:drm_mode_addfb2], [FB:17]
>[  354.456585] [drm:drm_mode_addfb2], [FB:18]
>[  354.456661] [drm:drm_mode_addfb2], [FB:19]
>[  354.463605] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[2] ENCODERS[2]
>[  354.463622] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[2] ENCODERS[2]
>[  354.463634] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[  354.463642] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
>[  354.463648] [drm:intel_lvds_detect], [CONNECTOR:5:LVDS-1]
>[  354.463669] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
>[  354.463679] [drm:drm_mode_debug_printmodeline], Modeline 8:"1024x600" 60 45000 1024 1072 1104 1200 600 603 609 625 0x48 0xa
>[  354.463688] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[  354.463706] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[2] ENCODERS[2]
>[  354.463715] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[2] ENCODERS[2]
>[  354.463724] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
>[  354.463731] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
>[  354.463737] [drm:intel_crt_detect], [CONNECTOR:11:VGA-1] force=1
>[  354.477062] [drm:intel_crt_detect], CRT not detected via hotplug
>[  354.478194] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
>[  354.478204] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>[  354.478212] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[  354.478220] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
>[  354.478524] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>[  354.478535] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
>[  354.478543] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
>[  354.478553] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
>[  354.478575] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
>[  354.478585] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
>[  354.478593] [drm:intel_crt_detect], [CONNECTOR:11:VGA-1] force=1
>[  354.492117] [drm:intel_crt_detect], CRT not detected via hotplug
>[  354.493241] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
>[  354.493251] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>[  354.493259] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[  354.493267] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
>[  354.493571] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>[  354.493581] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
>[  354.493591] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
>[  354.493601] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
>[  354.493712] [drm:pipe_crc_set_source], collecting CRCs for pipe A, pipe
>[  354.493739] [drm:pipe_crc_set_source], stopping CRCs for pipe A
>[  354.545116] [drm:intel_wait_for_vblank], vblank wait timed out
>[  354.545144] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[2] ENCODERS[2]
>[  354.545156] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[2] ENCODERS[2]
>[  354.545168] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[  354.545176] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
>[  354.545182] [drm:intel_lvds_detect], [CONNECTOR:5:LVDS-1]
>[  354.545202] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
>[  354.545212] [drm:drm_mode_debug_printmodeline], Modeline 8:"1024x600" 60 45000 1024 1072 1104 1200 600 603 609 625 0x48 0xa
>[  354.545221] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[  354.545241] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[2] ENCODERS[2]
>[  354.545250] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[2] ENCODERS[2]
>[  354.545259] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
>[  354.545266] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
>[  354.545272] [drm:intel_crt_detect], [CONNECTOR:11:VGA-1] force=1
>[  354.559114] [drm:intel_crt_detect], CRT not detected via hotplug
>[  354.560251] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
>[  354.560262] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>[  354.560269] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[  354.560277] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
>[  354.560581] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>[  354.560591] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
>[  354.560598] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
>[  354.560609] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
>[  354.560631] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
>[  354.560641] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
>[  354.560649] [drm:intel_crt_detect], [CONNECTOR:11:VGA-1] force=1
>[  354.574118] [drm:intel_crt_detect], CRT not detected via hotplug
>[  354.575231] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
>[  354.575241] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>[  354.575248] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[  354.575256] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
>[  354.575556] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>[  354.575566] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
>[  354.575573] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
>[  354.575583] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
>[  354.576499] [drm:intel_crtc_set_config], [CRTC:3] [NOFB]
>[  354.576508] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
>[  354.576515] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4]
>[  354.576524] [drm:intel_crtc_set_config], [CRTC:4] [FB:14] #connectors=1 (x y) (0 0)
>[  354.576530] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0
>[  354.576535] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4]
>[  354.614555] [drm:intel_crtc_cursor_set], cursor off
>[  354.614564] [drm:intel_crtc_set_config], [CRTC:3] [NOFB]
>[  354.614572] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
>[  354.614580] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4]
>[  354.614585] [drm:intel_crtc_cursor_set], cursor off
>[  354.614592] [drm:intel_crtc_set_config], [CRTC:4] [FB:14] #connectors=1 (x y) (0 0)
>[  354.614600] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0
>[  354.614606] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4]

Actions: View

Attachments on bug 75131: 94258

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.