Attachment 97519 Details for Bug 77137 – kernel log for mode switch on LVDS (still contains warning after patch)

kernel log for mode switch on LVDS (still contains warning after patch)

dmesg-20140417.txt (text/plain), 102.52 KB, created by Uwe Geuder on 2014-04-17 14:26:28 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Uwe Geuder

Created: 2014-04-17 14:26:28 UTC

Size: 102.52 KB

patch

obsolete

>[    0.000000] Initializing cgroup subsys cpuset
>[    0.000000] Initializing cgroup subsys cpu
>[    0.000000] Initializing cgroup subsys cpuacct
>[    0.000000] Linux version 3.14.0-994-generic (apw@gomeisa) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #201404170205 SMP Thu Apr 17 06:27:10 UTC 2014
>[    0.000000] KERNEL supported cpus:
>[    0.000000]   Intel GenuineIntel
>[    0.000000]   AMD AuthenticAMD
>[    0.000000]   NSC Geode by NSC
>[    0.000000]   Cyrix CyrixInstead
>[    0.000000]   Centaur CentaurHauls
>[    0.000000]   Transmeta GenuineTMx86
>[    0.000000]   Transmeta TransmetaCPU
>[    0.000000]   UMC UMC UMC UMC
>[    0.000000] e820: BIOS-provided physical RAM map:
>[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] usable
>[    0.000000] BIOS-e820: [mem 0x000000000009dc00-0x000000000009ffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000000d2000-0x00000000000d3fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000000dc000-0x00000000000dffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003f5cffff] usable
>[    0.000000] BIOS-e820: [mem 0x000000003f5d0000-0x000000003f5dffff] ACPI data
>[    0.000000] BIOS-e820: [mem 0x000000003f5e0000-0x000000003f5e2fff] ACPI NVS
>[    0.000000] BIOS-e820: [mem 0x000000003f5e3000-0x000000003fffffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
>[    0.000000] NX (Execute Disable) protection: active
>[    0.000000] SMBIOS 2.5 present.
>[    0.000000] DMI: LENOVO                           INVALID         /Caucasus2                       , BIOS 24CN18WW   12/11/2009
>[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
>[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
>[    0.000000] e820: last_pfn = 0x3f5d0 max_arch_pfn = 0x1000000
>[    0.000000] MTRR default type: uncachable
>[    0.000000] MTRR fixed ranges enabled:
>[    0.000000]   00000-9FFFF write-back
>[    0.000000]   A0000-BFFFF uncachable
>[    0.000000]   C0000-D3FFF write-protect
>[    0.000000]   D4000-DFFFF uncachable
>[    0.000000]   E0000-FFFFF write-protect
>[    0.000000] MTRR variable ranges enabled:
>[    0.000000]   0 base 000000000 mask 0C0000000 write-back
>[    0.000000]   1 base 03F600000 mask 0FFE00000 uncachable
>[    0.000000]   2 base 03F800000 mask 0FF800000 uncachable
>[    0.000000]   3 disabled
>[    0.000000]   4 disabled
>[    0.000000]   5 disabled
>[    0.000000]   6 disabled
>[    0.000000]   7 disabled
>[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>[    0.000000] original variable MTRRs
>[    0.000000] reg 0, base: 0GB, range: 1GB, type WB
>[    0.000000] reg 1, base: 1014MB, range: 2MB, type UC
>[    0.000000] reg 2, base: 1016MB, range: 8MB, type UC
>[    0.000000] total RAM covered: 1014M
>[    0.000000] Found optimal setting for mtrr clean up
>[    0.000000]  gran_size: 64K 	chunk_size: 16M 	num_reg: 3  	lose cover RAM: 0G
>[    0.000000] New variable MTRRs
>[    0.000000] reg 0, base: 0GB, range: 1GB, type WB
>[    0.000000] reg 1, base: 1014MB, range: 2MB, type UC
>[    0.000000] reg 2, base: 1016MB, range: 8MB, type UC
>[    0.000000] found SMP MP-table at [mem 0x000f7cb0-0x000f7cbf] mapped at [c00f7cb0]
>[    0.000000] Scanning 1 areas for low memory corruption
>[    0.000000] initial memory mapped: [mem 0x00000000-0x021fffff]
>[    0.000000] Base memory trampoline at [c0099000] 99000 size 16384
>[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
>[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
>[    0.000000] init_memory_mapping: [mem 0x37800000-0x379fffff]
>[    0.000000]  [mem 0x37800000-0x379fffff] page 2M
>[    0.000000] init_memory_mapping: [mem 0x34000000-0x377fffff]
>[    0.000000]  [mem 0x34000000-0x377fffff] page 2M
>[    0.000000] init_memory_mapping: [mem 0x00100000-0x33ffffff]
>[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
>[    0.000000]  [mem 0x00200000-0x33ffffff] page 2M
>[    0.000000] init_memory_mapping: [mem 0x37a00000-0x37bfdfff]
>[    0.000000]  [mem 0x37a00000-0x37bfdfff] page 4k
>[    0.000000] BRK [0x01c03000, 0x01c03fff] PGTABLE
>[    0.000000] log_buf_len: 262144
>[    0.000000] early log buf free: 126576(96%)
>[    0.000000] RAMDISK: [mem 0x35fd6000-0x36fe2fff]
>[    0.000000] ACPI: RSDP 000f7c80 000024 (v02 PTLTD )
>[    0.000000] ACPI: XSDT 3f5d7302 000074 (v01 LENOVO CB-01    06040000  LTP 00000000)
>[    0.000000] ACPI: FACP 3f5dfc60 0000F4 (v03 LENOVO CB-01    06040000 PTL  00000002)
>[    0.000000] ACPI: DSDT 3f5d8498 007754 (v01 LENOVO    CB-01 06040000 MSFT 03000000)
>[    0.000000] ACPI: FACS 3f5e2fc0 000040
>[    0.000000] ACPI: TCPA 3f5dfd54 000032 (v01 Phoeni  x       06040000  TL  00000000)
>[    0.000000] ACPI: MCFG 3f5dfd86 00003C (v01 PTLTD    MCFG   06040000  LTP 00000000)
>[    0.000000] ACPI: HPET 3f5dfdc2 000038 (v01 PTLTD  HPETTBL  06040000  LTP 00000001)
>[    0.000000] ACPI: APIC 3f5dfdfa 000068 (v01 PTLTD  ? APIC   06040000  LTP 00000000)
>[    0.000000] ACPI: BOOT 3f5dfe62 000028 (v01 PTLTD  $SBFTBL$ 06040000  LTP 00000001)
>[    0.000000] ACPI: SLIC 3f5dfe8a 000176 (v01 LENOVO CB-01    06040000  LTP 00000000)
>[    0.000000] ACPI: SSDT 3f5d78f8 00025F (v01  PmRef  Cpu0Tst 00003000 INTL 20050624)
>[    0.000000] ACPI: SSDT 3f5d7852 0000A6 (v01  PmRef  Cpu1Tst 00003000 INTL 20050624)
>[    0.000000] ACPI: SSDT 3f5d7376 0004DC (v02  PmRef    CpuPm 00003000 INTL 20050624)
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] 121MB HIGHMEM available.
>[    0.000000] 891MB LOWMEM available.
>[    0.000000]   mapped low ram: 0 - 37bfe000
>[    0.000000]   low ram: 0 - 37bfe000
>[    0.000000] BRK [0x01c04000, 0x01c04fff] PGTABLE
>[    0.000000] Zone ranges:
>[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
>[    0.000000]   Normal   [mem 0x01000000-0x37bfdfff]
>[    0.000000]   HighMem  [mem 0x37bfe000-0x3f5cffff]
>[    0.000000] Movable zone start for each node
>[    0.000000] Early memory node ranges
>[    0.000000]   node   0: [mem 0x00001000-0x0009cfff]
>[    0.000000]   node   0: [mem 0x00100000-0x3f5cffff]
>[    0.000000] On node 0 totalpages: 259436
>[    0.000000]   DMA zone: 32 pages used for memmap
>[    0.000000]   DMA zone: 0 pages reserved
>[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
>[    0.000000]   Normal zone: 1752 pages used for memmap
>[    0.000000]   Normal zone: 224254 pages, LIFO batch:31
>[    0.000000]   HighMem zone: 244 pages used for memmap
>[    0.000000]   HighMem zone: 31186 pages, LIFO batch:7
>[    0.000000] Using APIC driver default
>[    0.000000] ACPI: PM-Timer IO Port: 0x1008
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>[    0.000000] ACPI: IRQ0 used by override.
>[    0.000000] ACPI: IRQ2 used by override.
>[    0.000000] ACPI: IRQ9 used by override.
>[    0.000000] Using ACPI (MADT) for SMP configuration information
>[    0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
>[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
>[    0.000000] nr_irqs_gsi: 40
>[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
>[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000d1fff]
>[    0.000000] PM: Registered nosave memory: [mem 0x000d2000-0x000d3fff]
>[    0.000000] PM: Registered nosave memory: [mem 0x000d4000-0x000dbfff]
>[    0.000000] PM: Registered nosave memory: [mem 0x000dc000-0x000dffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000e3fff]
>[    0.000000] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
>[    0.000000] e820: [mem 0x40000000-0xdfffffff] available for PCI devices
>[    0.000000] Booting paravirtualized kernel on bare hardware
>[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
>[    0.000000] PERCPU: Embedded 14 pages/cpu @f737b000 s35776 r0 d21568 u57344
>[    0.000000] pcpu-alloc: s35776 r0 d21568 u57344 alloc=14*4096
>[    0.000000] pcpu-alloc: [0] 0 [0] 1 
>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 257652
>[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.14.0-994-generic root=UUID=8138d584-52ee-4802-926e-69cd9a3a4eaf ro quiet splash vt.handoff=7 drm.debug=0xe log_buf_len=256K foo
>[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
>[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>[    0.000000] Initializing CPU#0
>[    0.000000] Initializing HighMem for node 0 (00037bfe:0003f5d0)
>[    0.000000] Initializing Movable for node 0 (00000000:00000000)
>[    0.000000] Memory: 999412K/1037744K available (6818K kernel code, 640K rwdata, 2936K rodata, 872K init, 916K bss, 38332K reserved, 124744K highmem)
>[    0.000000] virtual kernel memory layout:
>[    0.000000]     fixmap  : 0xfff14000 - 0xfffff000   ( 940 kB)
>[    0.000000]     pkmap   : 0xffc00000 - 0xffe00000   (2048 kB)
>[    0.000000]     vmalloc : 0xf83fe000 - 0xffbfe000   ( 120 MB)
>[    0.000000]     lowmem  : 0xc0000000 - 0xf7bfe000   ( 891 MB)
>[    0.000000]       .init : 0xc1a2a000 - 0xc1b04000   ( 872 kB)
>[    0.000000]       .data : 0xc16a8eb5 - 0xc1a290c0   (3584 kB)
>[    0.000000]       .text : 0xc1000000 - 0xc16a8eb5   (6819 kB)
>[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
>[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
>[    0.000000] Hierarchical RCU implementation.
>[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
>[    0.000000] 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
>[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
>[    0.000000] NR_IRQS:2304 nr_irqs:512 16
>[    0.000000] CPU 0 irqstacks, hard=f5808000 soft=f580a000
>[    0.000000] Console: colour dummy device 80x25
>[    0.000000] console [tty0] enabled
>[    0.000000] allocated 2097152 bytes of page_cgroup
>[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
>[    0.000000] hpet clockevent registered
>[    0.000000] tsc: Fast TSC calibration using PIT
>[    0.000000] tsc: Detected 1662.428 MHz processor
>[    0.004020] Calibrating delay loop (skipped), value calculated using timer frequency.. 3324.85 BogoMIPS (lpj=6649712)
>[    0.004029] pid_max: default: 32768 minimum: 301
>[    0.004050] ACPI: Core revision 20131218
>[    0.018464] ACPI: All ACPI Tables successfully acquired
>[    0.020063] Security Framework initialized
>[    0.020092] AppArmor: AppArmor initialized
>[    0.020097] Yama: becoming mindful.
>[    0.020216] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
>[    0.020224] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
>[    0.020649] Initializing cgroup subsys memory
>[    0.020664] Initializing cgroup subsys devices
>[    0.020670] Initializing cgroup subsys freezer
>[    0.020675] Initializing cgroup subsys net_cls
>[    0.020681] Initializing cgroup subsys blkio
>[    0.020686] Initializing cgroup subsys perf_event
>[    0.020693] Initializing cgroup subsys net_prio
>[    0.020698] Initializing cgroup subsys hugetlb
>[    0.020757] CPU: Physical Processor ID: 0
>[    0.020762] CPU: Processor Core ID: 0
>[    0.020768] mce: CPU supports 5 MCE banks
>[    0.020783] CPU0: Thermal monitoring handled by SMI
>[    0.020808] Last level iTLB entries: 4KB 32, 2MB 0, 4MB 0
>[    0.020808] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8, 1GB 0
>[    0.020808] tlb_flushall_shift: 6
>[    0.021265] Freeing SMP alternatives memory: 32K (c1b04000 - c1b0c000)
>[    0.023221] ftrace: allocating 31040 entries in 61 pages
>[    0.048174] Enabling APIC mode:  Flat.  Using 1 I/O APICs
>[    0.048687] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>[    0.089738] smpboot: CPU0: Intel(R) Atom(TM) CPU N450   @ 1.66GHz (fam: 06, model: 1c, stepping: 0a)
>[    0.092000] Performance Events: PEBS fmt0+, 8-deep LBR, Atom events, Intel PMU driver.
>[    0.092000] ... version:                3
>[    0.092000] ... bit width:              40
>[    0.092000] ... generic registers:      2
>[    0.092000] ... value mask:             000000ffffffffff
>[    0.092000] ... max period:             000000007fffffff
>[    0.092000] ... fixed-purpose events:   3
>[    0.092000] ... event mask:             0000000700000003
>[    0.095670] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
>[    0.096020] CPU 1 irqstacks, hard=f5b0a000 soft=f5b0c000
>[    0.096026] x86: Booting SMP configuration:
>[    0.096031] .... node  #0, CPUs:      #1
>[    0.008000] Initializing CPU#1
>[    0.008000] CPU0: Thermal monitoring enabled (TM1)
>[    0.108115] x86: Booted up 1 node, 2 CPUs
>[    0.108129] smpboot: Total of 2 processors activated (6649.71 BogoMIPS)
>[    0.108805] devtmpfs: initialized
>[    0.108900] EVM: security.selinux
>[    0.108905] EVM: security.SMACK64
>[    0.108909] EVM: security.ima
>[    0.108912] EVM: security.capability
>[    0.108959] PM: Registering ACPI NVS region [mem 0x3f5e0000-0x3f5e2fff] (12288 bytes)
>[    0.113426] pinctrl core: initialized pinctrl subsystem
>[    0.113654] regulator-dummy: no parameters
>[    0.113718] RTC time: 16:52:31, date: 04/17/14
>[    0.113828] NET: Registered protocol family 16
>[    0.114310] EISA bus registered
>[    0.114317] cpuidle: using governor ladder
>[    0.114322] cpuidle: using governor menu
>[    0.114546] ACPI: bus type PCI registered
>[    0.114553] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
>[    0.114735] PCI: MMCONFIG for domain 0000 [bus 00-10] at [mem 0xe0000000-0xe10fffff] (base 0xe0000000)
>[    0.114743] PCI: MMCONFIG at [mem 0xe0000000-0xe10fffff] reserved in E820
>[    0.114747] PCI: Using MMCONFIG for extended config space
>[    0.114751] PCI: Using configuration type 1 for base access
>[    0.118166] bio: create slab <bio-0> at 0
>[    0.120015] ACPI: Added _OSI(Module Device)
>[    0.120015] ACPI: Added _OSI(Processor Device)
>[    0.120015] ACPI: Added _OSI(3.0 _SCP Extensions)
>[    0.120015] ACPI: Added _OSI(Processor Aggregator Device)
>[    0.152990] ACPI: SSDT 3f5d81c1 000203 (v02  PmRef  Cpu0Ist 00003000 INTL 20050624)
>[    0.153738] ACPI: Dynamic OEM Table Load:
>[    0.153746] ACPI: SSDT   (null) 000203 (v02  PmRef  Cpu0Ist 00003000 INTL 20050624)
>[    0.154042] ACPI: SSDT 3f5d7b57 0005E5 (v02  PmRef  Cpu0Cst 00003001 INTL 20050624)
>[    0.154724] ACPI: Dynamic OEM Table Load:
>[    0.154731] ACPI: SSDT   (null) 0005E5 (v02  PmRef  Cpu0Cst 00003001 INTL 20050624)
>[    0.155276] ACPI: SSDT 3f5d83c4 0000D4 (v02  PmRef  Cpu1Ist 00003000 INTL 20050624)
>[    0.155980] ACPI: Dynamic OEM Table Load:
>[    0.155987] ACPI: SSDT   (null) 0000D4 (v02  PmRef  Cpu1Ist 00003000 INTL 20050624)
>[    0.156183] ACPI: SSDT 3f5d813c 000085 (v02  PmRef  Cpu1Cst 00003000 INTL 20050624)
>[    0.156867] ACPI: Dynamic OEM Table Load:
>[    0.156873] ACPI: SSDT   (null) 000085 (v02  PmRef  Cpu1Cst 00003000 INTL 20050624)
>[    0.192162] ACPI: Interpreter enabled
>[    0.192205] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-580)
>[    0.192239] ACPI: (supports S0 S1 S3 S4 S5)
>[    0.192245] ACPI: Using IOAPIC for interrupt routing
>[    0.192325] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>[    0.192696] ACPI: No dock devices found.
>[    0.216377] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
>[    0.216396] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
>[    0.216551] ACPI Error: [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS (20131218/dsfield-211)
>[    0.216566] ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node f581f2b8), AE_ALREADY_EXISTS (20131218/psparse-536)
>[    0.216583] ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error
>[    0.216598] acpi PNP0A08:00: _OSC failed (AE_ALREADY_EXISTS); disabling ASPM
>[    0.219683] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-10] only partially covers this bridge
>[    0.220084] PCI host bridge to bus 0000:00
>[    0.220094] pci_bus 0000:00: root bus resource [bus 00-3f]
>[    0.220102] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
>[    0.220108] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
>[    0.220115] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
>[    0.220121] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
>[    0.220128] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
>[    0.220134] pci_bus 0000:00: root bus resource [mem 0x40000000-0xf7ffffff]
>[    0.220141] pci_bus 0000:00: root bus resource [io  0x0d00-0xfdff]
>[    0.220161] pci 0000:00:00.0: [8086:a010] type 00 class 0x060000
>[    0.220368] pci 0000:00:02.0: [8086:a011] type 00 class 0x030000
>[    0.220388] pci 0000:00:02.0: reg 0x10: [mem 0xf0300000-0xf037ffff]
>[    0.220400] pci 0000:00:02.0: reg 0x14: [io  0x18e8-0x18ef]
>[    0.220411] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff pref]
>[    0.220422] pci 0000:00:02.0: reg 0x1c: [mem 0xf0000000-0xf00fffff]
>[    0.220623] pci 0000:00:02.1: [8086:a012] type 00 class 0x038000
>[    0.220639] pci 0000:00:02.1: reg 0x10: [mem 0xf0380000-0xf03fffff]
>[    0.220898] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
>[    0.220930] pci 0000:00:1b.0: reg 0x10: [mem 0xf0400000-0xf0403fff 64bit]
>[    0.221047] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>[    0.221246] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
>[    0.221386] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>[    0.221493] pci 0000:00:1c.0: System wakeup disabled by ACPI
>[    0.221614] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
>[    0.221746] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
>[    0.221850] pci 0000:00:1c.1: System wakeup disabled by ACPI
>[    0.221975] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
>[    0.222042] pci 0000:00:1d.0: reg 0x20: [io  0x1820-0x183f]
>[    0.222209] pci 0000:00:1d.0: System wakeup disabled by ACPI
>[    0.222326] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
>[    0.222392] pci 0000:00:1d.1: reg 0x20: [io  0x1840-0x185f]
>[    0.222592] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
>[    0.222664] pci 0000:00:1d.2: reg 0x20: [io  0x1860-0x187f]
>[    0.222865] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
>[    0.222939] pci 0000:00:1d.3: reg 0x20: [io  0x1880-0x189f]
>[    0.223096] pci 0000:00:1d.3: System wakeup disabled by ACPI
>[    0.223226] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
>[    0.223261] pci 0000:00:1d.7: reg 0x10: [mem 0xf0604000-0xf06043ff]
>[    0.223393] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>[    0.223525] pci 0000:00:1d.7: System wakeup disabled by ACPI
>[    0.223646] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
>[    0.223822] pci 0000:00:1e.0: System wakeup disabled by ACPI
>[    0.223942] pci 0000:00:1f.0: [8086:27bc] type 00 class 0x060100
>[    0.224071] pci 0000:00:1f.0: [Firmware Bug]: TigerPoint LPC.BM_STS cleared
>[    0.224294] pci 0000:00:1f.2: [8086:27c1] type 00 class 0x010601
>[    0.224327] pci 0000:00:1f.2: reg 0x10: [io  0x18e0-0x18e7]
>[    0.224344] pci 0000:00:1f.2: reg 0x14: [io  0x18d4-0x18d7]
>[    0.224361] pci 0000:00:1f.2: reg 0x18: [io  0x18d8-0x18df]
>[    0.224378] pci 0000:00:1f.2: reg 0x1c: [io  0x18d0-0x18d3]
>[    0.224395] pci 0000:00:1f.2: reg 0x20: [io  0x18c0-0x18cf]
>[    0.224412] pci 0000:00:1f.2: reg 0x24: [mem 0xf0604400-0xf06047ff]
>[    0.224480] pci 0000:00:1f.2: PME# supported from D3hot
>[    0.224673] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
>[    0.224753] pci 0000:00:1f.3: reg 0x20: [io  0x18a0-0x18bf]
>[    0.225202] pci 0000:05:00.0: [14e4:1692] type 00 class 0x020000
>[    0.225254] pci 0000:05:00.0: reg 0x10: [mem 0xf0100000-0xf010ffff 64bit]
>[    0.225531] pci 0000:05:00.0: PME# supported from D3hot D3cold
>[    0.225770] pci 0000:00:1c.0: PCI bridge to [bus 05]
>[    0.225785] pci 0000:00:1c.0:   bridge window [mem 0xf0100000-0xf01fffff]
>[    0.226016] pci 0000:07:00.0: [14e4:4727] type 00 class 0x028000
>[    0.226061] pci 0000:07:00.0: reg 0x10: [mem 0xf0200000-0xf0203fff 64bit]
>[    0.226303] pci 0000:07:00.0: supports D1 D2
>[    0.226309] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold
>[    0.226512] pci 0000:00:1c.1: PCI bridge to [bus 07]
>[    0.226527] pci 0000:00:1c.1:   bridge window [mem 0xf0200000-0xf02fffff]
>[    0.226686] pci 0000:00:1e.0: PCI bridge to [bus 11] (subtractive decode)
>[    0.226707] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
>[    0.226714] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
>[    0.226721] pci 0000:00:1e.0:   bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
>[    0.226727] pci 0000:00:1e.0:   bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
>[    0.226734] pci 0000:00:1e.0:   bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
>[    0.226741] pci 0000:00:1e.0:   bridge window [mem 0x40000000-0xf7ffffff] (subtractive decode)
>[    0.226747] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xfdff] (subtractive decode)
>[    0.226813] pci_bus 0000:00: on NUMA node 0
>[    0.227084] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>[    0.227245] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 10 11 12 14 15)
>[    0.227402] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
>[    0.227559] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>[    0.227725] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>[    0.227893] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>[    0.228079] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>[    0.228247] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>[    0.228517] ACPI: Enabled 4 GPEs in block 00 to 1F
>[    0.228517] ACPI : EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
>[    0.228668] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
>[    0.228668] vgaarb: loaded
>[    0.228668] vgaarb: bridge control possible 0000:00:02.0
>[    0.228711] SCSI subsystem initialized
>[    0.228764] libata version 3.00 loaded.
>[    0.228764] ACPI: bus type USB registered
>[    0.228764] usbcore: registered new interface driver usbfs
>[    0.228764] usbcore: registered new interface driver hub
>[    0.228764] usbcore: registered new device driver usb
>[    0.228764] PCI: Using ACPI for IRQ routing
>[    0.228764] PCI: pci_cache_line_size set to 64 bytes
>[    0.228764] e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff]
>[    0.228764] e820: reserve RAM buffer [mem 0x3f5d0000-0x3fffffff]
>[    0.229006] NetLabel: Initializing
>[    0.229012] NetLabel:  domain hash size = 128
>[    0.229015] NetLabel:  protocols = UNLABELED CIPSOv4
>[    0.229051] NetLabel:  unlabeled traffic allowed by default
>[    0.232246] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
>[    0.232257] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>[    0.232268] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
>[    0.233024] Switched to clocksource hpet
>[    0.250808] AppArmor: AppArmor Filesystem Enabled
>[    0.250886] pnp: PnP ACPI init
>[    0.250931] ACPI: bus type PNP registered
>[    0.251401] system 00:00: [io  0x0800-0x080f] has been reserved
>[    0.251412] system 00:00: [io  0x1000-0x107f] could not be reserved
>[    0.251420] system 00:00: [io  0x1180-0x11bf] has been reserved
>[    0.251427] system 00:00: [io  0x04d0-0x04d1] has been reserved
>[    0.251434] system 00:00: [io  0xfe00] has been reserved
>[    0.251442] system 00:00: [io  0x0700-0x070f] has been reserved
>[    0.251449] system 00:00: [io  0x164e-0x174c] has been reserved
>[    0.251458] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
>[    0.251466] system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved
>[    0.251473] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
>[    0.251481] system 00:00: [mem 0xfef00000-0xfeffffff] has been reserved
>[    0.251492] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.251526] pnp 00:01: [dma 4]
>[    0.251601] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
>[    0.251705] pnp 00:02: Plug and Play ACPI device, IDs PNP0c04 (active)
>[    0.251948] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
>[    0.252148] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
>[    0.252236] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
>[    0.252342] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
>[    0.252444] pnp 00:07: Plug and Play ACPI device, IDs SYN1037 SYN1000 SYN0002 PNP0f13 (active)
>[    0.252836] pnp 00:08: Plug and Play ACPI device, IDs INT0800 (active)
>[    0.256108] pnp: PnP ACPI: found 9 devices
>[    0.256114] ACPI: bus type PNP unregistered
>[    0.256121] PnPBIOS: Disabled by ACPI PNP
>[    0.297883] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 05] add_size 1000
>[    0.297899] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05] add_size 200000
>[    0.297918] pci 0000:00:1c.1: bridge window [io  0x1000-0x0fff] to [bus 07] add_size 1000
>[    0.297927] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 07] add_size 200000
>[    0.297955] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
>[    0.297963] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
>[    0.297970] pci 0000:00:1c.0: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
>[    0.297977] pci 0000:00:1c.1: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
>[    0.298001] pci 0000:00:1c.0: BAR 15: assigned [mem 0x40000000-0x401fffff 64bit pref]
>[    0.298017] pci 0000:00:1c.1: BAR 15: assigned [mem 0x40200000-0x403fffff 64bit pref]
>[    0.298029] pci 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
>[    0.298040] pci 0000:00:1c.1: BAR 13: assigned [io  0x3000-0x3fff]
>[    0.298048] pci 0000:00:1c.0: PCI bridge to [bus 05]
>[    0.298057] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
>[    0.298069] pci 0000:00:1c.0:   bridge window [mem 0xf0100000-0xf01fffff]
>[    0.298079] pci 0000:00:1c.0:   bridge window [mem 0x40000000-0x401fffff 64bit pref]
>[    0.298092] pci 0000:00:1c.1: PCI bridge to [bus 07]
>[    0.298099] pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
>[    0.298111] pci 0000:00:1c.1:   bridge window [mem 0xf0200000-0xf02fffff]
>[    0.298121] pci 0000:00:1c.1:   bridge window [mem 0x40200000-0x403fffff 64bit pref]
>[    0.298133] pci 0000:00:1e.0: PCI bridge to [bus 11]
>[    0.298155] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
>[    0.298161] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
>[    0.298167] pci_bus 0000:00: resource 6 [mem 0x000d4000-0x000d7fff]
>[    0.298174] pci_bus 0000:00: resource 7 [mem 0x000d8000-0x000dbfff]
>[    0.298180] pci_bus 0000:00: resource 8 [mem 0x000e0000-0x000e3fff]
>[    0.298187] pci_bus 0000:00: resource 9 [mem 0x40000000-0xf7ffffff]
>[    0.298193] pci_bus 0000:00: resource 10 [io  0x0d00-0xfdff]
>[    0.298200] pci_bus 0000:05: resource 0 [io  0x2000-0x2fff]
>[    0.298206] pci_bus 0000:05: resource 1 [mem 0xf0100000-0xf01fffff]
>[    0.298213] pci_bus 0000:05: resource 2 [mem 0x40000000-0x401fffff 64bit pref]
>[    0.298220] pci_bus 0000:07: resource 0 [io  0x3000-0x3fff]
>[    0.298226] pci_bus 0000:07: resource 1 [mem 0xf0200000-0xf02fffff]
>[    0.298233] pci_bus 0000:07: resource 2 [mem 0x40200000-0x403fffff 64bit pref]
>[    0.298240] pci_bus 0000:11: resource 4 [io  0x0000-0x0cf7]
>[    0.298246] pci_bus 0000:11: resource 5 [mem 0x000a0000-0x000bffff]
>[    0.298252] pci_bus 0000:11: resource 6 [mem 0x000d4000-0x000d7fff]
>[    0.298259] pci_bus 0000:11: resource 7 [mem 0x000d8000-0x000dbfff]
>[    0.298265] pci_bus 0000:11: resource 8 [mem 0x000e0000-0x000e3fff]
>[    0.298272] pci_bus 0000:11: resource 9 [mem 0x40000000-0xf7ffffff]
>[    0.298278] pci_bus 0000:11: resource 10 [io  0x0d00-0xfdff]
>[    0.298355] NET: Registered protocol family 2
>[    0.298705] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
>[    0.298752] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
>[    0.298809] TCP: Hash tables configured (established 8192 bind 8192)
>[    0.298854] TCP: reno registered
>[    0.298862] UDP hash table entries: 512 (order: 2, 16384 bytes)
>[    0.298880] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
>[    0.299013] NET: Registered protocol family 1
>[    0.299052] pci 0000:00:02.0: Boot video device
>[    0.300223] PCI: CLS 32 bytes, default 64
>[    0.300362] Trying to unpack rootfs image as initramfs...
>[    1.050174] Freeing initrd memory: 16436K (f5fd6000 - f6fe3000)
>[    1.050378] Simple Boot Flag at 0x36 set to 0x1
>[    1.050726] Scanning for low memory corruption every 60 seconds
>[    1.051436] futex hash table entries: 512 (order: 3, 32768 bytes)
>[    1.051463] Initialise system trusted keyring
>[    1.051567] audit: initializing netlink subsys (disabled)
>[    1.051605] audit: type=2000 audit(1397753551.048:1): initialized
>[    1.118839] bounce pool size: 64 pages
>[    1.118869] HugeTLB registered 2 MB page size, pre-allocated 0 pages
>[    1.123324] zbud: loaded
>[    1.123561] VFS: Disk quotas dquot_6.5.2
>[    1.123702] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>[    1.125280] fuse init (API version 7.22)
>[    1.125566] msgmni has been set to 1740
>[    1.125735] Key type big_key registered
>[    1.126882] Key type asymmetric registered
>[    1.126892] Asymmetric key parser 'x509' registered
>[    1.127020] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>[    1.127120] io scheduler noop registered
>[    1.127127] io scheduler deadline registered (default)
>[    1.127226] io scheduler cfq registered
>[    1.127631] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
>[    1.127795] pcieport 0000:00:1c.1: enabling device (0000 -> 0003)
>[    1.127946] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
>[    1.128189] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>[    1.128241] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
>[    1.128372] vesafb: mode is 1024x600x32, linelength=4096, pages=0
>[    1.128377] vesafb: scrolling: redraw
>[    1.128383] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
>[    1.128793] vesafb: framebuffer at 0xd0000000, mapped to 0xf8480000, using 2432k, total 2432k
>[    1.166867] Console: switching to colour frame buffer device 128x37
>[    1.204328] fb0: VESA VGA frame buffer device
>[    1.204392] intel_idle: MWAIT substates: 0x20220
>[    1.204408] intel_idle: v0.4 model 0x1C
>[    1.204413] intel_idle: lapic_timer_reliable_states 0x2
>[    1.204426] tsc: Marking TSC unstable due to TSC halts in idle states deeper than C2
>[    1.212672] ACPI: AC Adapter [ACAD] (on-line)
>[    1.212951] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/PNP0C0C:00/input/input0
>[    1.212963] ACPI: Power Button [PWRB]
>[    1.213107] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
>[    1.223068] ACPI: Lid Switch [LID]
>[    1.223256] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:01/input/input2
>[    1.223266] ACPI: Power Button [PWRB]
>[    1.223395] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
>[    1.223404] ACPI: Sleep Button [SLPB]
>[    1.223535] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
>[    1.223543] ACPI: Power Button [PWRF]
>[    1.247927] thermal LNXTHERM:00: registered as thermal_zone0
>[    1.247935] ACPI: Thermal Zone [TZ01] (57 C)
>[    1.248075] GHES: HEST is not enabled!
>[    1.248152] isapnp: Scanning for PnP cards...
>[    1.479582] ACPI: Battery Slot [BAT1] (battery present)
>[    1.564755] isapnp: No Plug & Play device found
>[    1.565136] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
>[    1.573076] Linux agpgart interface v0.103
>[    1.573255] agpgart-intel 0000:00:00.0: Intel GMA3150 Chipset
>[    1.573375] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
>[    1.573573] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
>[    1.573955] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
>[    1.580537] brd: module loaded
>[    1.583362] loop: module loaded
>[    1.584825] libphy: Fixed MDIO Bus: probed
>[    1.585169] tun: Universal TUN/TAP device driver, 1.6
>[    1.585174] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
>[    1.585389] PPP generic driver version 2.4.2
>[    1.585552] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>[    1.585566] ehci-pci: EHCI PCI platform driver
>[    1.585821] ehci-pci 0000:00:1d.7: EHCI Host Controller
>[    1.585840] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
>[    1.585882] ehci-pci 0000:00:1d.7: debug port 1
>[    1.589823] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
>[    1.589869] ehci-pci 0000:00:1d.7: irq 23, io mem 0xf0604000
>[    1.600098] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
>[    1.600279] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>[    1.600287] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.600293] usb usb1: Product: EHCI Host Controller
>[    1.600299] usb usb1: Manufacturer: Linux 3.14.0-994-generic ehci_hcd
>[    1.600304] usb usb1: SerialNumber: 0000:00:1d.7
>[    1.600719] hub 1-0:1.0: USB hub found
>[    1.600745] hub 1-0:1.0: 8 ports detected
>[    1.601668] ehci-platform: EHCI generic platform driver
>[    1.601702] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>[    1.601718] ohci-pci: OHCI PCI platform driver
>[    1.601755] ohci-platform: OHCI generic platform driver
>[    1.601777] uhci_hcd: USB Universal Host Controller Interface driver
>[    1.601993] uhci_hcd 0000:00:1d.0: UHCI Host Controller
>[    1.602010] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>[    1.602029] uhci_hcd 0000:00:1d.0: detected 2 ports
>[    1.602071] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
>[    1.602243] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>[    1.602250] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.602256] usb usb2: Product: UHCI Host Controller
>[    1.602262] usb usb2: Manufacturer: Linux 3.14.0-994-generic uhci_hcd
>[    1.602267] usb usb2: SerialNumber: 0000:00:1d.0
>[    1.602660] hub 2-0:1.0: USB hub found
>[    1.602685] hub 2-0:1.0: 2 ports detected
>[    1.603125] uhci_hcd 0000:00:1d.1: UHCI Host Controller
>[    1.603143] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>[    1.603159] uhci_hcd 0000:00:1d.1: detected 2 ports
>[    1.603230] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
>[    1.603398] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>[    1.603406] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.603412] usb usb3: Product: UHCI Host Controller
>[    1.603417] usb usb3: Manufacturer: Linux 3.14.0-994-generic uhci_hcd
>[    1.603423] usb usb3: SerialNumber: 0000:00:1d.1
>[    1.603817] hub 3-0:1.0: USB hub found
>[    1.603842] hub 3-0:1.0: 2 ports detected
>[    1.604394] uhci_hcd 0000:00:1d.2: UHCI Host Controller
>[    1.604422] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>[    1.604438] uhci_hcd 0000:00:1d.2: detected 2 ports
>[    1.604507] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
>[    1.604675] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>[    1.604682] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.604688] usb usb4: Product: UHCI Host Controller
>[    1.604694] usb usb4: Manufacturer: Linux 3.14.0-994-generic uhci_hcd
>[    1.604699] usb usb4: SerialNumber: 0000:00:1d.2
>[    1.605104] hub 4-0:1.0: USB hub found
>[    1.605130] hub 4-0:1.0: 2 ports detected
>[    1.605590] uhci_hcd 0000:00:1d.3: UHCI Host Controller
>[    1.605608] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
>[    1.605625] uhci_hcd 0000:00:1d.3: detected 2 ports
>[    1.605694] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
>[    1.605860] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>[    1.605868] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.605874] usb usb5: Product: UHCI Host Controller
>[    1.605879] usb usb5: Manufacturer: Linux 3.14.0-994-generic uhci_hcd
>[    1.605885] usb usb5: SerialNumber: 0000:00:1d.3
>[    1.606262] hub 5-0:1.0: USB hub found
>[    1.606287] hub 5-0:1.0: 2 ports detected
>[    1.606757] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>[    1.619233] i8042: Detected active multiplexing controller, rev 1.1
>[    1.624263] serio: i8042 KBD port at 0x60,0x64 irq 1
>[    1.624293] serio: i8042 AUX0 port at 0x60,0x64 irq 12
>[    1.624338] serio: i8042 AUX1 port at 0x60,0x64 irq 12
>[    1.624349] serio: i8042 AUX2 port at 0x60,0x64 irq 12
>[    1.624358] serio: i8042 AUX3 port at 0x60,0x64 irq 12
>[    1.624677] mousedev: PS/2 mouse device common for all mice
>[    1.625719] rtc_cmos 00:04: RTC can wake from S4
>[    1.626016] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
>[    1.626074] rtc_cmos 00:04: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
>[    1.626287] device-mapper: uevent: version 1.0.3
>[    1.626521] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
>[    1.626594] platform eisa.0: Probing EISA bus 0
>[    1.626602] platform eisa.0: EISA: Cannot allocate resource for mainboard
>[    1.626610] platform eisa.0: Cannot allocate resource for EISA slot 1
>[    1.626616] platform eisa.0: Cannot allocate resource for EISA slot 2
>[    1.626621] platform eisa.0: Cannot allocate resource for EISA slot 3
>[    1.626627] platform eisa.0: Cannot allocate resource for EISA slot 4
>[    1.626633] platform eisa.0: Cannot allocate resource for EISA slot 5
>[    1.626639] platform eisa.0: Cannot allocate resource for EISA slot 6
>[    1.626645] platform eisa.0: Cannot allocate resource for EISA slot 7
>[    1.626651] platform eisa.0: Cannot allocate resource for EISA slot 8
>[    1.626657] platform eisa.0: EISA: Detected 0 cards
>[    1.626671] cpufreq-nforce2: No nForce2 chipset.
>[    1.626680] ledtrig-cpu: registered to indicate activity on CPUs
>[    1.627015] TCP: cubic registered
>[    1.627335] NET: Registered protocol family 10
>[    1.627986] NET: Registered protocol family 17
>[    1.628083] Key type dns_resolver registered
>[    1.628665] Using IPI No-Shortcut mode
>[    1.629059] Loading compiled-in X.509 certificates
>[    1.640625] Loaded X.509 cert 'Magrathea: Glacier signing key: b2d7f3c6e24a460c4aeb8f9709544215155f6152'
>[    1.640661] registered taskstats version 1
>[    1.647547] Key type trusted registered
>[    1.654389] Key type encrypted registered
>[    1.661140] AppArmor: AppArmor sha1 policy hashing enabled
>[    1.661152] IMA: No TPM chip found, activating TPM-bypass!
>[    1.661974] regulator-dummy: disabling
>[    1.662153]   Magic number: 10:301:894
>[    1.662333] rtc_cmos 00:04: setting system clock to 2014-04-17 16:52:33 UTC (1397753553)
>[    1.663418] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
>[    1.663424] EDD information not available.
>[    1.663581] PM: Hibernation image not present or could not be loaded.
>[    1.664420] Freeing unused kernel memory: 872K (c1a2a000 - c1b04000)
>[    1.664620] Write protecting the kernel text: 6820k
>[    1.664868] Write protecting the kernel read-only data: 2944k
>[    1.664877] NX-protecting the kernel data: 5468k
>[    1.700246] systemd-udevd[96]: starting version 204
>[    1.774609] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
>[    1.798444] pps_core: LinuxPPS API ver. 1 registered
>[    1.798455] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
>[    1.798650] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
>[    1.798662] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
>[    1.818459] PTP clock support registered
>[    1.856174] ahci 0000:00:1f.2: version 3.0
>[    1.856518] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
>[    1.856671] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
>[    1.856685] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part 
>[    1.860644] scsi0 : ahci
>[    1.861134] scsi1 : ahci
>[    1.861592] scsi2 : ahci
>[    1.866841] tg3.c:v3.136 (Jan 03, 2014)
>[    1.871136] scsi3 : ahci
>[    1.871416] ata1: SATA max UDMA/133 abar m1024@0xf0604400 port 0xf0604500 irq 42
>[    1.871432] ata2: SATA max UDMA/133 abar m1024@0xf0604400 port 0xf0604580 irq 42
>[    1.871446] ata3: SATA max UDMA/133 abar m1024@0xf0604400 port 0xf0604600 irq 42
>[    1.871458] ata4: SATA max UDMA/133 abar m1024@0xf0604400 port 0xf0604680 irq 42
>[    1.888712] libphy: tg3 mdio bus: probed
>[    1.965493] tg3 0000:05:00.0 eth0: Tigon3 [partno(BCM57780) rev 57780001] (PCI Express) MAC address 00:26:9e:bb:4e:3d
>[    1.965508] tg3 0000:05:00.0 eth0: attached PHY driver [Broadcom BCM57780] (mii_bus:phy_addr=500:01)
>[    1.965519] tg3 0000:05:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
>[    1.965529] tg3 0000:05:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
>[    1.997605] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
>[    1.997620] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
>[    2.188204] ata2: SATA link down (SStatus 0 SControl 300)
>[    2.188273] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[    2.188323] ata3: SATA link down (SStatus 0 SControl 300)
>[    2.190348] ata1.00: ATA-8: HITACHI HTS545025B9A300, PB2ZC61H, max UDMA/100
>[    2.190356] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
>[    2.191728] ata1.00: configured for UDMA/100
>[    2.192134] scsi 0:0:0:0: Direct-Access     ATA      HITACHI HTS54502 PB2Z PQ: 0 ANSI: 5
>[    2.192350] ata4: SATA link down (SStatus 0 SControl 300)
>[    2.192926] sd 0:0:0:0: Attached scsi generic sg0 type 0
>[    2.193012] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
>[    2.193380] sd 0:0:0:0: [sda] Write Protect is off
>[    2.193392] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[    2.193531] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    2.197682] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
>[    2.197693] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
>[    2.259013]  sda: sda1 sda2 sda3 < sda5 sda6 sda7 > sda4
>[    2.261520] sd 0:0:0:0: [sda] Attached SCSI disk
>[    2.397647] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
>[    2.397658] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
>[    2.452188] usb 1-8: new high-speed USB device number 4 using ehci-pci
>[    2.605487] usb 1-8: New USB device found, idVendor=5986, idProduct=0190
>[    2.605497] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    2.605504] usb 1-8: Product: Lenovo EasyCamera
>[    2.605510] usb 1-8: Manufacturer: Bison Corp.
>[    2.844200] usb 3-1: new full-speed USB device number 2 using uhci_hcd
>[    3.036384] usb 3-1: New USB device found, idVendor=2087, idProduct=0a01
>[    3.036395] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[    3.036401] usb 3-1: Product: Cando 10.1 Multi Touch Panel with Controller
>[    3.036407] usb 3-1: Manufacturer: Cando Corporation
>[    3.036413] usb 3-1: SerialNumber: 20091003.001
>[    3.276148] usb 3-2: new full-speed USB device number 3 using uhci_hcd
>[    3.430664] random: nonblocking pool is initialized
>[    3.444382] usb 3-2: New USB device found, idVendor=10ab, idProduct=0816
>[    3.444392] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[    3.444398] usb 3-2: Product: Bluetooth Module BCM92070
>[    3.444404] usb 3-2: Manufacturer: Broadcom Corp
>[    3.444410] usb 3-2: SerialNumber: 70F3953262B0
>[    3.733132] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
>[    5.123524] init: ureadahead main process (162) terminated with status 5
>[    6.595887] Adding 1028092k swap on /dev/sda7.  Priority:-1 extents:1 across:1028092k FS
>[    8.062255] systemd-udevd[279]: starting version 204
>[    9.048460] lp: driver loaded but no devices found
>[    9.281235] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
>[   10.201099] ACPI Warning: SystemIO range 0x00001028-0x0000102f conflicts with OpRegion 0x00001000-0x0000102f (\_SB_.PCI0.LPCB.PMIO) (20131218/utaddress-258)
>[   10.201122] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[   10.201136] ACPI Warning: SystemIO range 0x000011b0-0x000011bf conflicts with OpRegion 0x00001180-0x000011ff (\GPIO) (20131218/utaddress-258)
>[   10.201152] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[   10.201159] ACPI Warning: SystemIO range 0x00001180-0x000011af conflicts with OpRegion 0x00001180-0x000011ff (\GPIO) (20131218/utaddress-258)
>[   10.201174] ACPI Warning: SystemIO range 0x00001180-0x000011af conflicts with OpRegion 0x00001180-0x000011af (\_SB_.PCI0.LPCB.GPOX) (20131218/utaddress-258)
>[   10.201188] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[   10.201194] lpc_ich: Resource conflict(s) found affecting gpio_ich
>[   10.338475] input: Ideapad extra buttons as /devices/platform/VPC2004:00/input/input10
>[   10.391133] wmi: Mapper loaded
>[   10.738723] [drm] Initialized drm 1.1.0 20060810
>[   11.054369] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
>[   11.054383] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
>[   11.077459] Bluetooth: Core ver 2.18
>[   11.077531] NET: Registered protocol family 31
>[   11.077539] Bluetooth: HCI device and connection manager initialized
>[   11.077554] Bluetooth: HCI socket layer initialized
>[   11.077565] Bluetooth: L2CAP socket layer initialized
>[   11.077600] Bluetooth: SCO socket layer initialized
>[   11.267673] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
>[   11.267687] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
>[   11.347485] usbcore: registered new interface driver btusb
>[   11.406410] [drm:i915_dump_device_info] i915 device info: gen=3, pciid=0xa011 flags=is_mobile,is_g33,need_gfx_hws,is_pineview,has_hotplug,has_overlay,
>[   11.406577] [drm:intel_detect_pch] No PCH found.
>[   11.406590] [drm] Memory usable by graphics device = 512M
>[   11.406597] [drm:i915_gem_gtt_init] GMADR size = 256M
>[   11.406603] [drm:i915_gem_gtt_init] GTT stolen size = 8M
>[   11.406614] checking generic (d0000000 260000) vs hw (d0000000 10000000)
>[   11.406620] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
>[   11.406675] Console: switching to colour dummy device 80x25
>[   11.408280] [drm:intel_opregion_setup] graphic opregion physical addr: 0x3f5e0e7c
>[   11.408365] [drm:intel_opregion_setup] Public ACPI methods supported
>[   11.408372] [drm:intel_opregion_setup] SWSCI supported
>[   11.454001] [drm:swsci_setup] SWSCI BIOS requested (00000241) SBCB callbacks that are not supported (00000001)
>[   11.454014] [drm:swsci_setup] SWSCI GBDA callbacks 000004f3, SBCB callbacks 00000241
>[   11.454021] [drm:intel_opregion_setup] ASLE supported
>[   11.454129] i915 0000:00:02.0: irq 43 for MSI/MSI-X
>[   11.454162] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
>[   11.454169] [drm] Driver supports precise vblank timestamp query.
>[   11.454178] [drm:init_vbt_defaults] Set default to SSC at 100000 kHz
>[   11.454187] [drm:intel_parse_bios] Using VBT from OpRegion: $VBT PINEVIEW       d
>[   11.454197] [drm:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 1 lvds_ssc_freq 100000 display_clock_mode 0 fdi_rx_polarity_inverted 0
>[   11.454204] [drm:parse_general_definitions] crt_ddc_bus_pin: 2
>[   11.454212] [drm:parse_lfp_panel_data] DRRS supported mode is static
>[   11.454221] [drm:parse_lfp_panel_data] Found panel mode in BIOS VBT tables:
>[   11.454233] [drm:drm_mode_debug_printmodeline] Modeline 0:"1024x600" 0 50400 1024 1048 1184 1344 600 603 604 625 0x8 0xa
>[   11.454241] [drm:parse_lfp_panel_data] VBT initial LVDS value 40300300
>[   11.454248] [drm:parse_lfp_backlight] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 9
>[   11.454258] [drm:parse_sdvo_panel_data] Found SDVO panel mode in BIOS VBT tables:
>[   11.454269] [drm:drm_mode_debug_printmodeline] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
>[   11.454276] [drm:parse_sdvo_device_mapping] No SDVO device info is found in VBT
>[   11.454284] [drm:parse_driver_features] DRRS State Enabled:0
>[   11.454290] [drm:parse_mipi] No MIPI config BDB found
>[   11.454370] [drm:intel_dsm_pci_probe] no _DSM method for intel device
>[   11.454397] [drm:i915_gem_init_stolen] found 8388608 bytes of stolen memory at 3f800000
>[   11.454405] [drm:intel_display_power_get] enabling always-on
>[   11.454511] [drm:intel_modeset_init] 2 display pipes available.
>[   11.454530] [drm:intel_modeset_init] pipe A sprite A init failed: -19
>[   11.454544] [drm:intel_modeset_init] pipe B sprite B init failed: -19
>[   11.454555] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
>[   11.556128] [drm:intel_lvds_init] using preferred mode from EDID: 
>[   11.556146] [drm:drm_mode_debug_printmodeline] Modeline 11:"1024x600" 60 50400 1024 1048 1184 1344 600 603 604 625 0x48 0xa
>[   11.556162] [drm:intel_lvds_init] detected single-link lvds configuration
>[   11.559584] [drm:intel_panel_setup_backlight] backlight initialized, enabled, brightness 13046/13046, sysfs interface registered
>[   11.559793] [drm:intel_modeset_readout_hw_state] [CRTC:5] hw state readout: disabled
>[   11.559817] [drm:intel_modeset_readout_hw_state] [CRTC:7] hw state readout: enabled
>[   11.559828] [drm:intel_modeset_readout_hw_state] [ENCODER:9:LVDS-9] hw state readout: enabled, pipe B
>[   11.559839] [drm:intel_modeset_readout_hw_state] [ENCODER:15:DAC-15] hw state readout: disabled, pipe A
>[   11.559848] [drm:intel_modeset_readout_hw_state] [CONNECTOR:8:LVDS-1] hw state readout: enabled
>[   11.559857] [drm:intel_modeset_readout_hw_state] [CONNECTOR:14:VGA-1] hw state readout: disabled
>[   11.559869] [drm:intel_dump_pipe_config] [CRTC:5][setup_hw_state] config for pipe A
>[   11.559875] [drm:intel_dump_pipe_config] cpu_transcoder: A
>[   11.559881] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
>[   11.559889] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[   11.559898] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[   11.559904] [drm:intel_dump_pipe_config] requested mode:
>[   11.559916] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[   11.559922] [drm:intel_dump_pipe_config] adjusted mode:
>[   11.559933] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[   11.559945] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[   11.559952] [drm:intel_dump_pipe_config] port clock: 0
>[   11.559959] [drm:intel_dump_pipe_config] pipe src size: 0x0
>[   11.559967] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[   11.559975] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[   11.559981] [drm:intel_dump_pipe_config] ips: 0
>[   11.559988] [drm:intel_dump_pipe_config] double wide: 0
>[   11.559998] [drm:intel_dump_pipe_config] [CRTC:7][setup_hw_state] config for pipe B
>[   11.560058] [drm:intel_dump_pipe_config] cpu_transcoder: B
>[   11.560065] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
>[   11.560073] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[   11.560081] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[   11.560088] [drm:intel_dump_pipe_config] requested mode:
>[   11.560099] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 1024 0 0 0 600 0 0 0 0x0 0x0
>[   11.560105] [drm:intel_dump_pipe_config] adjusted mode:
>[   11.560116] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0xa
>[   11.560127] [drm:intel_dump_crtc_timings] crtc timings: 50446 1024 1048 1184 1344 600 603 604 625, type: 0x0 flags: 0xa
>[   11.560133] [drm:intel_dump_pipe_config] port clock: 50446
>[   11.560138] [drm:intel_dump_pipe_config] pipe src size: 1024x600
>[   11.560145] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[   11.560152] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[   11.560158] [drm:intel_dump_pipe_config] ips: 0
>[   11.560164] [drm:intel_dump_pipe_config] double wide: 0
>[   11.560173] [drm:intel_connector_check_state] [CONNECTOR:8:LVDS-1]
>[   11.560200] [drm:check_encoder_state] [ENCODER:9:LVDS-9]
>[   11.560210] [drm:check_encoder_state] [ENCODER:15:DAC-15]
>[   11.560218] [drm:check_crtc_state] [CRTC:5]
>[   11.560226] [drm:check_crtc_state] [CRTC:7]
>[   11.560252] [drm:i9xx_get_plane_config] pipe/plane 1/1 with fb: size=1024x600@32, offset=0, pitch 4096, size 0x258000
>[   11.560262] [drm:i915_gem_object_create_stolen_for_preallocated] creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=258000
>[   11.560273] [drm:i915_pages_create_for_stolen] offset=0x0, size=2457600
>[   11.560292] [drm:intel_alloc_plane_obj] plane fb obj f6b9d000
>[   11.560301] [drm:i915_gem_setup_global_gtt] reserving preallocated space: 0 + 258000
>[   11.560308] [drm:i915_gem_setup_global_gtt] clearing unused GTT space: [258000, 1ffff000]
>[   11.564455] [drm:i915_gem_context_init] fake context support initialized
>[   11.564522] [drm:init_status_page] render ring hws offset: 0x00259000
>[   11.564531] [drm:i915_gem_object_create_stolen] creating stolen object: size=20000
>[   11.564542] [drm:i915_pages_create_for_stolen] offset=0x258000, size=131072
>[   11.568294] [drm:i915_gem_object_create_stolen] creating stolen object: size=1000
>[   11.568313] [drm:i915_pages_create_for_stolen] offset=0x278000, size=4096
>[   11.568355] [drm] initialized overlay support
>[   11.568383] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:8:LVDS-1]
>[   11.568392] [drm:intel_lvds_detect] [CONNECTOR:8:LVDS-1]
>[   11.568423] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:8:LVDS-1] probed modes :
>[   11.568438] [drm:drm_mode_debug_printmodeline] Modeline 11:"1024x600" 60 50400 1024 1048 1184 1344 600 603 604 625 0x48 0xa
>[   11.568448] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:14:VGA-1]
>[   11.568457] [drm:intel_crt_detect] [CONNECTOR:14:VGA-1] force=1
>[   11.584096] [drm:intel_crt_detect] CRT not detected via hotplug
>[   11.589267] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
>[   11.589283] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[   11.589292] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[   11.589301] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
>[   11.589621] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[   11.589632] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
>[   11.589639] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
>[   11.589652] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:14:VGA-1] disconnected
>[   11.589662] [drm:drm_setup_crtcs] 
>[   11.589673] [drm:drm_enable_connectors] connector 8 enabled? yes
>[   11.589680] [drm:drm_enable_connectors] connector 14 enabled? no
>[   11.589690] [drm:intel_fb_initial_config] looking for cmdline mode on connector 8
>[   11.589697] [drm:intel_fb_initial_config] looking for preferred mode on connector 8
>[   11.589707] [drm:intel_fb_initial_config] connector LVDS-1 on crtc 7: 1024x600
>[   11.589714] [drm:intel_fb_initial_config] connector 14 not enabled, skipping
>[   11.589721] [drm:drm_setup_crtcs] desired mode 1024x600 set on crtc 7
>[   11.589736] [drm:intelfb_create] no BIOS fb, allocating a new one
>[   11.589744] [drm:i915_gem_object_create_stolen] creating stolen object: size=258000
>[   11.589758] [drm:i915_pages_create_for_stolen] offset=0x279000, size=2457600
>[   11.591370] [drm:intelfb_create] allocated 1024x600 fb: 0x00280000, bo f68aa400
>[   11.598256] fbcon: inteldrmfb (fb0) is primary device
>[   11.598540] [drm:intel_crtc_cursor_set] cursor off
>[   11.598546] [drm:intel_crtc_set_config] [CRTC:5] [NOFB]
>[   11.598555] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[   11.598562] [drm:intel_modeset_stage_output_state] [CONNECTOR:8:LVDS-1] to [CRTC:7]
>[   11.598566] [drm:intel_crtc_cursor_set] cursor off
>[   11.598573] [drm:intel_crtc_set_config] [CRTC:7] [FB:18] #connectors=1 (x y) (0 0)
>[   11.598578] [drm:intel_set_config_compute_mode_changes] modes are different, full mode set
>[   11.598587] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[   11.598596] [drm:drm_mode_debug_printmodeline] Modeline 17:"1024x600" 60 50400 1024 1048 1184 1344 600 603 604 625 0x48 0xa
>[   11.598600] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:7], mode_changed=1, fb_changed=1
>[   11.598605] [drm:intel_modeset_stage_output_state] [CONNECTOR:8:LVDS-1] to [CRTC:7]
>[   11.598611] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 2, prepare: 2, disable: 0
>[   11.598620] [drm:connected_sink_compute_bpp] [CONNECTOR:8:LVDS-1] checking for sink bpp constrains
>[   11.598623] [drm:connected_sink_compute_bpp] clamping display bpp (was 24) to EDID reported max of 18
>[   11.598637] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 18, dithering: 1
>[   11.598642] [drm:intel_dump_pipe_config] [CRTC:7][modeset] config for pipe B
>[   11.598644] [drm:intel_dump_pipe_config] cpu_transcoder: B
>[   11.598647] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1
>[   11.598653] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[   11.598657] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[   11.598659] [drm:intel_dump_pipe_config] requested mode:
>[   11.598668] [drm:drm_mode_debug_printmodeline] Modeline 0:"1024x600" 60 50400 1024 1048 1184 1344 600 603 604 625 0x48 0xa
>[   11.598671] [drm:intel_dump_pipe_config] adjusted mode:
>[   11.598679] [drm:drm_mode_debug_printmodeline] Modeline 0:"1024x600" 60 50400 1024 1048 1184 1344 600 603 604 625 0x48 0xa
>[   11.598687] [drm:intel_dump_crtc_timings] crtc timings: 50400 1024 1048 1184 1344 600 603 604 625, type: 0x48 flags: 0xa
>[   11.598690] [drm:intel_dump_pipe_config] port clock: 50400
>[   11.598693] [drm:intel_dump_pipe_config] pipe src size: 1024x600
>[   11.598697] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[   11.598701] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[   11.598704] [drm:intel_dump_pipe_config] ips: 0
>[   11.598706] [drm:intel_dump_pipe_config] double wide: 0
>[   11.598712] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0
>[   11.831621] Linux video capture interface: v2.00
>[   11.877238] [drm:pineview_update_wm] Self-refresh is disabled
>[   11.877250] [drm:i9xx_get_refclk] using SSC reference clock of 100000 kHz
>[   11.878838] [drm:i9xx_update_primary_plane] Writing base 00280000 00000000 0 0 4096
>[   11.878847] [drm:intel_crtc_mode_set] [ENCODER:9:LVDS-9] set [MODE:0:1024x600]
>[   11.879566] [drm:intel_calculate_wm] FIFO entries required for mode: 11
>[   11.879569] [drm:intel_calculate_wm] FIFO watermark level: 491
>[   11.879573] [drm:pineview_update_wm] DSPFW1 register is f5830f0f
>[   11.879576] [drm:intel_calculate_wm] FIFO entries required for mode: 13
>[   11.879579] [drm:intel_calculate_wm] FIFO watermark level: 494
>[   11.879582] [drm:intel_calculate_wm] FIFO entries required for mode: 105
>[   11.879585] [drm:intel_calculate_wm] FIFO watermark level: 397
>[   11.879589] [drm:intel_calculate_wm] FIFO entries required for mode: 107
>[   11.879591] [drm:intel_calculate_wm] FIFO watermark level: 400
>[   11.879595] [drm:pineview_update_wm] DSPFW3 register is 3f3f018d
>[   11.879598] [drm:pineview_update_wm] Self-refresh is enabled
>[   11.904592] microcode: CPU0 sig=0x106ca, pf=0x4, revision=0x105
>[   12.113943] microcode: CPU1 sig=0x106ca, pf=0x4, revision=0x105
>[   12.114188] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
>[   12.225560] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (5986:0190)
>[   12.230369] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8:1.0/input/input15
>[   12.232433] usbcore: registered new interface driver uvcvideo
>[   12.232435] USB Video Class driver (1.1.1)
>[   12.348075] [drm:intel_panel_enable_backlight] pipe B
>[   12.348089] [drm:intel_panel_actually_set_backlight] set backlight PWM = 13046
>[   12.348103] [drm:intel_connector_check_state] [CONNECTOR:8:LVDS-1]
>[   12.348110] [drm:check_encoder_state] [ENCODER:9:LVDS-9]
>[   12.348113] [drm:check_encoder_state] [ENCODER:15:DAC-15]
>[   12.348117] [drm:check_crtc_state] [CRTC:5]
>[   12.348120] [drm:check_crtc_state] [CRTC:7]
>[   12.348172] Console: switching to colour frame buffer device 128x37
>[   12.348192] [drm:intel_crtc_set_config] [CRTC:7] [FB:18] #connectors=1 (x y) (0 0)
>[   12.348199] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:7], mode_changed=0, fb_changed=0
>[   12.348203] [drm:intel_modeset_stage_output_state] [CONNECTOR:8:LVDS-1] to [CRTC:7]
>[   12.355911] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
>[   12.355915] i915 0000:00:02.0: registered panic notifier
>[   12.360406] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
>[   12.362756] [drm:asle_set_backlight] bclp = 0x800000ff
>[   12.362770] [drm:asle_set_backlight] updating opregion backlight 255/255
>[   12.362780] [drm:intel_panel_actually_set_backlight] set backlight PWM = 13005
>[   12.371294] [drm:asle_set_backlight] bclp = 0x800000ff
>[   12.371306] [drm:asle_set_backlight] updating opregion backlight 255/255
>[   12.371316] [drm:intel_panel_actually_set_backlight] set backlight PWM = 13005
>[   12.377740] acpi device:04: registered as cooling_device2
>[   12.378122] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input16
>[   12.378560] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
>[   12.378840] snd_hda_intel 0000:00:1b.0: enabling device (0104 -> 0106)
>[   12.381021] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
>[   12.434746] [drm:intel_crtc_set_config] [CRTC:7] [FB:18] #connectors=1 (x y) (0 0)
>[   12.434757] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:7], mode_changed=0, fb_changed=0
>[   12.434763] [drm:intel_modeset_stage_output_state] [CONNECTOR:8:LVDS-1] to [CRTC:7]
>[   12.446502] [drm:intel_crtc_set_config] [CRTC:7] [FB:18] #connectors=1 (x y) (0 0)
>[   12.446513] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:7], mode_changed=0, fb_changed=0
>[   12.446519] [drm:intel_modeset_stage_output_state] [CONNECTOR:8:LVDS-1] to [CRTC:7]
>[   12.459319] [drm:intel_crtc_set_config] [CRTC:7] [FB:18] #connectors=1 (x y) (0 0)
>[   12.459330] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:7], mode_changed=0, fb_changed=0
>[   12.459336] [drm:intel_modeset_stage_output_state] [CONNECTOR:8:LVDS-1] to [CRTC:7]
>[   12.535503] hda_codec: CX20582 (Pebble): BIOS auto-probing.
>[   12.536184] autoconfig: line_outs=1 (0x1f/0x0/0x0/0x0/0x0) type:speaker
>[   12.536197]    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>[   12.536205]    hp_outs=1 (0x19/0x0/0x0/0x0/0x0)
>[   12.536210]    mono: mono_out=0x0
>[   12.536215]    dig-out=0x20/0x0
>[   12.536220]    inputs:
>[   12.536227]      Internal Mic=0x23
>[   12.536233]      Mic=0x1b
>[   12.539549] hda_codec: Enable sync_write for stable communication
>[   12.554464] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
>[   12.558062] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
>[   12.736852] psmouse serio4: synaptics: Touchpad model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04773/0xa40000/0x4a0500, board id: 3655, fw id: 638876
>[   12.807750] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input14
>[   12.934087] [drm:i915_gem_open] 
>[   12.934154] [drm:intel_crtc_cursor_set] cursor off
>[   12.934161] [drm:intel_crtc_set_config] [CRTC:5] [NOFB]
>[   12.934171] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[   12.934178] [drm:intel_modeset_stage_output_state] [CONNECTOR:8:LVDS-1] to [CRTC:7]
>[   12.934183] [drm:intel_crtc_cursor_set] cursor off
>[   12.934190] [drm:intel_crtc_set_config] [CRTC:7] [FB:18] #connectors=1 (x y) (0 0)
>[   12.934197] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:7], mode_changed=0, fb_changed=0
>[   12.934203] [drm:intel_modeset_stage_output_state] [CONNECTOR:8:LVDS-1] to [CRTC:7]
>[   12.934238] [drm:i915_gem_open] 
>[   12.934274] [drm:intel_crtc_cursor_set] cursor off
>[   12.934280] [drm:intel_crtc_set_config] [CRTC:5] [NOFB]
>[   12.934287] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[   12.934293] [drm:intel_modeset_stage_output_state] [CONNECTOR:8:LVDS-1] to [CRTC:7]
>[   12.934298] [drm:intel_crtc_cursor_set] cursor off
>[   12.934303] [drm:intel_crtc_set_config] [CRTC:7] [FB:18] #connectors=1 (x y) (0 0)
>[   12.934310] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:7], mode_changed=0, fb_changed=0
>[   12.934316] [drm:intel_modeset_stage_output_state] [CONNECTOR:8:LVDS-1] to [CRTC:7]
>[   12.934343] [drm:i915_gem_open] 
>[   12.934486] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[2] ENCODERS[2]
>[   12.934496] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[2] ENCODERS[2]
>[   12.934517] [drm:drm_mode_getconnector] [CONNECTOR:8:?]
>[   12.934525] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:8:LVDS-1]
>[   12.934531] [drm:intel_lvds_detect] [CONNECTOR:8:LVDS-1]
>[   12.934553] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:8:LVDS-1] probed modes :
>[   12.934563] [drm:drm_mode_debug_printmodeline] Modeline 11:"1024x600" 60 50400 1024 1048 1184 1344 600 603 604 625 0x48 0xa
>[   12.934572] [drm:drm_mode_getconnector] [CONNECTOR:8:?]
>[   12.942763] [drm:drm_mode_getconnector] [CONNECTOR:14:?]
>[   12.942781] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:14:VGA-1]
>[   12.942796] [drm:intel_crt_detect] [CONNECTOR:14:VGA-1] force=1
>[   12.956116] [drm:intel_crt_detect] CRT not detected via hotplug
>[   12.960092] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
>[   12.960107] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[   12.960115] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[   12.960124] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
>[   12.960439] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[   12.960449] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
>[   12.960457] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
>[   12.960470] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:14:VGA-1] disconnected
>[   12.960495] [drm:drm_mode_getconnector] [CONNECTOR:14:?]
>[   12.960506] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:14:VGA-1]
>[   12.960515] [drm:intel_crt_detect] [CONNECTOR:14:VGA-1] force=1
>[   12.976070] [drm:intel_crt_detect] CRT not detected via hotplug
>[   12.980077] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
>[   12.980092] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[   12.980100] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[   12.980108] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
>[   12.980422] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[   12.980432] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
>[   12.980439] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
>[   12.980453] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:14:VGA-1] disconnected
>[   12.980526] [drm:drm_mode_addfb] [FB:19]
>[   13.127256] audit: type=1400 audit(1397742764.960:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=465 comm="apparmor_parser"
>[   13.127280] audit: type=1400 audit(1397742764.960:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=465 comm="apparmor_parser"
>[   13.127294] audit: type=1400 audit(1397742764.960:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=465 comm="apparmor_parser"
>[   13.127314] audit: type=1400 audit(1397742764.960:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=410 comm="apparmor_parser"
>[   13.127335] audit: type=1400 audit(1397742764.960:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=410 comm="apparmor_parser"
>[   13.127353] audit: type=1400 audit(1397742764.960:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=410 comm="apparmor_parser"
>[   13.129951] audit: type=1400 audit(1397742764.964:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=465 comm="apparmor_parser"
>[   13.129980] audit: type=1400 audit(1397742764.964:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=465 comm="apparmor_parser"
>[   13.130421] audit: type=1400 audit(1397742764.964:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=410 comm="apparmor_parser"
>[   13.130440] audit: type=1400 audit(1397742764.964:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=410 comm="apparmor_parser"
>[   15.197312] init: failsafe main process (481) killed by TERM signal
>[   15.762415] [drm:drm_mode_addfb] [FB:19]
>[   15.771377] [drm:drm_mode_setcrtc] [CRTC:7]
>[   15.771395] [drm:drm_mode_setcrtc] [CONNECTOR:8:LVDS-1]
>[   15.771402] [drm:intel_crtc_set_config] [CRTC:7] [FB:19] #connectors=1 (x y) (0 0)
>[   15.771411] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:7], mode_changed=0, fb_changed=1
>[   15.771418] [drm:intel_modeset_stage_output_state] [CONNECTOR:8:LVDS-1] to [CRTC:7]
>[   15.775979] [drm:i9xx_update_primary_plane] Writing base 004E0000 00000000 0 0 4096
>[   15.799616] [drm:drm_mode_setcrtc] [CRTC:7]
>[   15.799637] [drm:drm_mode_setcrtc] [CONNECTOR:8:LVDS-1]
>[   15.799645] [drm:intel_crtc_set_config] [CRTC:7] [FB:19] #connectors=1 (x y) (0 0)
>[   15.799655] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:7], mode_changed=0, fb_changed=0
>[   15.799662] [drm:intel_modeset_stage_output_state] [CONNECTOR:8:LVDS-1] to [CRTC:7]
>[   16.876620] Bluetooth: RFCOMM TTY layer initialized
>[   16.876651] Bluetooth: RFCOMM socket layer initialized
>[   16.876673] Bluetooth: RFCOMM ver 1.11
>[   17.079720] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
>[   17.079732] Bluetooth: BNEP filters: protocol multicast
>[   17.079755] Bluetooth: BNEP socket layer initialized
>[   17.297426] init: avahi-cups-reload main process (641) terminated with status 1
>[   17.708347] ppdev: user-space parallel port driver
>[   18.258613] audit_printk_skb: 54 callbacks suppressed
>[   18.258625] audit: type=1400 audit(1397742770.092:30): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=633 comm="apparmor_parser"
>[   18.258644] audit: type=1400 audit(1397742770.092:31): apparmor="STATUS" operation="profile_load" name="sanitized_helper" pid=633 comm="apparmor_parser"
>[   18.258660] audit: type=1400 audit(1397742770.092:32): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=633 comm="apparmor_parser"
>[   18.258675] audit: type=1400 audit(1397742770.092:33): apparmor="STATUS" operation="profile_load" name="sanitized_helper" pid=633 comm="apparmor_parser"
>[   18.258690] audit: type=1400 audit(1397742770.092:34): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=633 comm="apparmor_parser"
>[   18.258704] audit: type=1400 audit(1397742770.092:35): apparmor="STATUS" operation="profile_load" name="sanitized_helper" pid=633 comm="apparmor_parser"
>[   18.284305] audit: type=1400 audit(1397742770.120:36): apparmor="STATUS" operation="profile_replace" name="sanitized_helper" pid=633 comm="apparmor_parser"
>[   18.284327] audit: type=1400 audit(1397742770.120:37): apparmor="STATUS" operation="profile_replace" name="/usr/bin/evince-previewer" pid=633 comm="apparmor_parser"
>[   18.300135] audit: type=1400 audit(1397742770.136:38): apparmor="STATUS" operation="profile_replace" name="sanitized_helper" pid=633 comm="apparmor_parser"
>[   18.300155] audit: type=1400 audit(1397742770.136:39): apparmor="STATUS" operation="profile_replace" name="/usr/bin/evince-thumbnailer" pid=633 comm="apparmor_parser"
>[   24.887993] [drm:i915_gem_open] 
>[   25.090259] tg3 0000:05:00.0: irq 45 for MSI/MSI-X
>[   25.109989] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
>[   25.969204] tg3 0000:05:00.0 eth0: Link is down
>[   26.468523] [drm:i915_gem_open] 
>[   26.468580] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[2] ENCODERS[2]
>[   26.497698] [drm:i915_gem_open] 
>[   26.497757] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[2] ENCODERS[2]
>[   26.497778] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[2] ENCODERS[2]
>[   26.521413] [drm:drm_mode_addfb] [FB:20]
>[   26.521661] [drm:drm_mode_addfb] [FB:20]
>[   26.525886] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[2] ENCODERS[2]
>[   26.525910] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[2] ENCODERS[2]
>[   26.526087] [drm:drm_mode_getconnector] [CONNECTOR:8:?]
>[   26.526109] [drm:drm_mode_getconnector] [CONNECTOR:8:?]
>[   26.526953] [drm:drm_mode_getconnector] [CONNECTOR:14:?]
>[   26.526979] [drm:drm_mode_getconnector] [CONNECTOR:14:?]
>[   26.822316] [drm:drm_mode_addfb] [FB:20]
>[   26.822343] [drm:drm_mode_setcrtc] [CRTC:7]
>[   26.822356] [drm:drm_mode_setcrtc] [CONNECTOR:8:LVDS-1]
>[   26.822363] [drm:intel_crtc_set_config] [CRTC:7] [FB:20] #connectors=1 (x y) (0 0)
>[   26.822373] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:7], mode_changed=0, fb_changed=1
>[   26.822379] [drm:intel_modeset_stage_output_state] [CONNECTOR:8:LVDS-1] to [CRTC:7]
>[   26.823674] [drm:i9xx_update_primary_plane] Writing base 00800000 00000000 0 0 4096
>[   26.837109] [drm:asle_set_backlight] bclp = 0x800000ff
>[   26.837120] [drm:asle_set_backlight] updating opregion backlight 255/255
>[   26.837127] [drm:intel_panel_actually_set_backlight] set backlight PWM = 13005
>[   30.068618] [drm:intel_calculate_wm] FIFO entries required for mode: 11
>[   30.068629] [drm:intel_calculate_wm] FIFO watermark level: 491
>[   30.068636] [drm:pineview_update_wm] DSPFW1 register is f5830f0f
>[   30.068640] [drm:intel_calculate_wm] FIFO entries required for mode: 13
>[   30.068645] [drm:intel_calculate_wm] FIFO watermark level: 494
>[   30.068650] [drm:intel_calculate_wm] FIFO entries required for mode: 105
>[   30.068654] [drm:intel_calculate_wm] FIFO watermark level: 397
>[   30.068659] [drm:intel_calculate_wm] FIFO entries required for mode: 107
>[   30.068664] [drm:intel_calculate_wm] FIFO watermark level: 400
>[   30.068669] [drm:pineview_update_wm] DSPFW3 register is 7f3f018d
>[   30.068673] [drm:pineview_update_wm] Self-refresh is enabled
>[   45.405775] [drm:intel_crtc_cursor_set] cursor off
>[   52.001261] [drm:drm_mode_getconnector] [CONNECTOR:8:?]
>[   52.001276] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:8:LVDS-1]
>[   52.001282] [drm:intel_lvds_detect] [CONNECTOR:8:LVDS-1]
>[   52.001307] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:8:LVDS-1] probed modes :
>[   52.001317] [drm:drm_mode_debug_printmodeline] Modeline 11:"1024x600" 60 50400 1024 1048 1184 1344 600 603 604 625 0x48 0xa
>[   52.001327] [drm:drm_mode_getconnector] [CONNECTOR:8:?]
>[   52.002069] [drm:drm_mode_getconnector] [CONNECTOR:14:?]
>[   52.002080] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:14:VGA-1]
>[   52.002087] [drm:intel_crt_detect] [CONNECTOR:14:VGA-1] force=1
>[   52.020105] [drm:intel_crt_detect] CRT not detected via hotplug
>[   52.024147] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
>[   52.024158] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[   52.024164] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[   52.024172] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
>[   52.024493] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[   52.024504] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
>[   52.024511] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
>[   52.024524] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:14:VGA-1] disconnected
>[   52.031984] [drm:intel_crtc_cursor_set] cursor off
>[   56.007747] [drm:intel_lvds_detect] [CONNECTOR:8:LVDS-1]
>[   56.007838] [drm:intel_crt_detect] [CONNECTOR:14:VGA-1] force=1
>[   56.028123] [drm:intel_crt_detect] CRT not detected via hotplug
>[   56.032116] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
>[   56.032127] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[   56.032134] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[   56.032141] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
>[   56.032469] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[   56.032481] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
>[   56.032488] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
>[   56.181968] [drm:asle_set_backlight] bclp = 0x800000ff
>[   56.181979] [drm:asle_set_backlight] updating opregion backlight 255/255
>[   56.181986] [drm:intel_panel_actually_set_backlight] set backlight PWM = 13005
>[   63.052010] [drm:drm_mode_getconnector] [CONNECTOR:8:?]
>[   63.052090] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:8:LVDS-1]
>[   63.052100] [drm:intel_lvds_detect] [CONNECTOR:8:LVDS-1]
>[   63.052133] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:8:LVDS-1] probed modes :
>[   63.052147] [drm:drm_mode_debug_printmodeline] Modeline 11:"1024x600" 60 50400 1024 1048 1184 1344 600 603 604 625 0x48 0xa
>[   63.052164] [drm:drm_mode_getconnector] [CONNECTOR:8:?]
>[   63.053144] [drm:drm_mode_getconnector] [CONNECTOR:14:?]
>[   63.053162] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:14:VGA-1]
>[   63.053176] [drm:intel_crt_detect] [CONNECTOR:14:VGA-1] force=1
>[   63.068142] [drm:intel_crt_detect] CRT not detected via hotplug
>[   63.072124] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
>[   63.072133] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[   63.072140] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[   63.072154] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
>[   63.072477] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[   63.072488] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
>[   63.072500] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
>[   63.072513] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:14:VGA-1] disconnected
>[   63.073044] [drm:drm_mode_getconnector] [CONNECTOR:8:?]
>[   63.073061] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:8:LVDS-1]
>[   63.073068] [drm:intel_lvds_detect] [CONNECTOR:8:LVDS-1]
>[   63.073096] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:8:LVDS-1] probed modes :
>[   63.073106] [drm:drm_mode_debug_printmodeline] Modeline 11:"1024x600" 60 50400 1024 1048 1184 1344 600 603 604 625 0x48 0xa
>[   63.073116] [drm:drm_mode_getconnector] [CONNECTOR:8:?]
>[   63.073756] [drm:drm_mode_getconnector] [CONNECTOR:14:?]
>[   63.073801] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:14:VGA-1]
>[   63.073818] [drm:intel_crt_detect] [CONNECTOR:14:VGA-1] force=1
>[   63.088134] [drm:intel_crt_detect] CRT not detected via hotplug
>[   63.092132] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
>[   63.092141] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[   63.092147] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[   63.092154] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
>[   63.092474] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[   63.092485] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
>[   63.092491] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
>[   63.092504] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:14:VGA-1] disconnected
>[  147.184342] *** calling xrandr --output LVDS1 --mode 800x600
>[  147.205373] [drm:drm_mode_getconnector] [CONNECTOR:8:?]
>[  147.205390] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:8:LVDS-1]
>[  147.205398] [drm:intel_lvds_detect] [CONNECTOR:8:LVDS-1]
>[  147.205427] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:8:LVDS-1] probed modes :
>[  147.205439] [drm:drm_mode_debug_printmodeline] Modeline 11:"1024x600" 60 50400 1024 1048 1184 1344 600 603 604 625 0x48 0xa
>[  147.205451] [drm:drm_mode_getconnector] [CONNECTOR:8:?]
>[  147.206354] [drm:drm_mode_getconnector] [CONNECTOR:14:?]
>[  147.206368] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:14:VGA-1]
>[  147.206376] [drm:intel_crt_detect] [CONNECTOR:14:VGA-1] force=1
>[  147.220176] [drm:intel_crt_detect] CRT not detected via hotplug
>[  147.224218] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
>[  147.224230] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[  147.224238] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[  147.224247] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
>[  147.224561] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[  147.224570] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
>[  147.224577] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
>[  147.224591] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:14:VGA-1] disconnected
>[  147.233359] [drm:asle_set_backlight] bclp = 0x80000004
>[  147.233374] [drm:asle_set_backlight] updating opregion backlight 4/255
>[  147.233385] [drm:intel_panel_actually_set_backlight] set backlight PWM = 204
>[  147.234793] [drm:drm_mode_setcrtc] [CRTC:7]
>[  147.234808] [drm:intel_crtc_set_config] [CRTC:7] [NOFB]
>[  147.234825] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:7], mode_changed=1, fb_changed=0
>[  147.234840] [drm:intel_modeset_stage_output_state] [CONNECTOR:8:LVDS-1] to [NOCRTC]
>[  147.234850] [drm:intel_modeset_stage_output_state] encoder changed, full mode switch
>[  147.234861] [drm:intel_modeset_stage_output_state] crtc changed, full mode switch
>[  147.234872] [drm:intel_modeset_stage_output_state] crtc disabled, full mode switch
>[  147.234889] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 2
>[  147.234904] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0
>[  147.525179] [drm:pineview_update_wm] Self-refresh is disabled
>[  147.525214] [drm:check_encoder_state] [ENCODER:9:LVDS-9]
>[  147.525225] [drm:check_encoder_state] [ENCODER:15:DAC-15]
>[  147.525234] [drm:check_crtc_state] [CRTC:5]
>[  147.525243] [drm:check_crtc_state] [CRTC:7]
>[  147.535819] [drm:drm_mode_addfb] [FB:19]
>[  147.541336] [drm:drm_mode_setcrtc] [CRTC:7]
>[  147.541358] [drm:drm_mode_setcrtc] [CONNECTOR:8:LVDS-1]
>[  147.541365] [drm:intel_crtc_set_config] [CRTC:7] [FB:19] #connectors=1 (x y) (0 0)
>[  147.541374] [drm:intel_set_config_compute_mode_changes] inactive crtc, full mode set
>[  147.541379] [drm:intel_set_config_compute_mode_changes] modes are different, full mode set
>[  147.541388] [drm:drm_mode_debug_printmodeline] Modeline 17:"1024x600" 60 50400 1024 1048 1184 1344 600 603 604 625 0x48 0xa
>[  147.541396] [drm:drm_mode_debug_printmodeline] Modeline 21:"" 0 40000 800 840 968 1056 600 601 605 628 0x0 0x5
>[  147.541401] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:7], mode_changed=1, fb_changed=0
>[  147.541406] [drm:intel_modeset_stage_output_state] encoder changed, full mode switch
>[  147.541412] [drm:intel_modeset_stage_output_state] [CONNECTOR:8:LVDS-1] to [CRTC:7]
>[  147.541417] [drm:intel_modeset_stage_output_state] crtc changed, full mode switch
>[  147.541422] [drm:intel_modeset_stage_output_state] crtc enabled, full mode switch
>[  147.541428] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 2, prepare: 2, disable: 0
>[  147.541438] [drm:connected_sink_compute_bpp] [CONNECTOR:8:LVDS-1] checking for sink bpp constrains
>[  147.541443] [drm:connected_sink_compute_bpp] clamping display bpp (was 24) to EDID reported max of 18
>[  147.541457] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 18, dithering: 1
>[  147.541462] [drm:intel_dump_pipe_config] [CRTC:7][modeset] config for pipe B
>[  147.541467] [drm:intel_dump_pipe_config] cpu_transcoder: B
>[  147.541471] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1
>[  147.541477] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  147.541483] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  147.541487] [drm:intel_dump_pipe_config] requested mode:
>[  147.541495] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 40000 800 840 968 1056 600 601 605 628 0x0 0x5
>[  147.541499] [drm:intel_dump_pipe_config] adjusted mode:
>[  147.541508] [drm:drm_mode_debug_printmodeline] Modeline 0:"1024x600" 60 50400 1024 1048 1184 1344 600 603 604 625 0x48 0xa
>[  147.541515] [drm:intel_dump_crtc_timings] crtc timings: 50400 800 1004 1140 1344 600 603 604 625, type: 0x48 flags: 0xa
>[  147.541520] [drm:intel_dump_pipe_config] port clock: 50400
>[  147.541524] [drm:intel_dump_pipe_config] pipe src size: 800x600
>[  147.541530] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00008000
>[  147.541535] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[  147.541540] [drm:intel_dump_pipe_config] ips: 0
>[  147.541544] [drm:intel_dump_pipe_config] double wide: 0
>[  147.541553] [drm:i9xx_get_refclk] using SSC reference clock of 100000 kHz
>[  147.545537] [drm:i9xx_update_primary_plane] Writing base 05800000 00000000 0 0 4096
>[  147.545554] [drm:intel_crtc_mode_set] [ENCODER:9:LVDS-9] set [MODE:0:]
>[  147.546307] [drm:intel_calculate_wm] FIFO entries required for mode: 11
>[  147.546315] [drm:intel_calculate_wm] FIFO watermark level: 491
>[  147.546324] [drm:pineview_update_wm] DSPFW1 register is f5830f0f
>[  147.546331] [drm:intel_calculate_wm] FIFO entries required for mode: 13
>[  147.546338] [drm:intel_calculate_wm] FIFO watermark level: 494
>[  147.546349] [drm:intel_calculate_wm] FIFO entries required for mode: 105
>[  147.546356] [drm:intel_calculate_wm] FIFO watermark level: 397
>[  147.546364] [drm:intel_calculate_wm] FIFO entries required for mode: 107
>[  147.546374] [drm:intel_calculate_wm] FIFO watermark level: 400
>[  147.546382] [drm:pineview_update_wm] DSPFW3 register is 3f3f018d
>[  147.546389] [drm:pineview_update_wm] Self-refresh is enabled
>[  147.952214] [drm:intel_panel_enable_backlight] pipe B
>[  147.952243] [drm:intel_panel_actually_set_backlight] set backlight PWM = 204
>[  147.952264] [drm:intel_connector_check_state] [CONNECTOR:8:LVDS-1]
>[  147.952279] [drm:check_encoder_state] [ENCODER:9:LVDS-9]
>[  147.952288] [drm:check_encoder_state] [ENCODER:15:DAC-15]
>[  147.952299] [drm:check_crtc_state] [CRTC:5]
>[  147.952308] [drm:check_crtc_state] [CRTC:7]
>[  147.952328] [drm:intel_pipe_config_compare] *ERROR* mismatch in gmch_pfit.lvds_border_bits (expected 32768, found 0)
>[  147.952336] ------------[ cut here ]------------
>[  147.952445] WARNING: CPU: 1 PID: 935 at /home/apw/COD/linux/drivers/gpu/drm/i915/intel_display.c:9805 check_crtc_state+0x26b/0x360 [i915]()
>[  147.952451] pipe state doesn't match!
>[  147.952458] Modules linked in: parport_pc ppdev bnep rfcomm joydev snd_hda_codec_conexant snd_hda_codec_generic snd_hda_intel coretemp snd_hda_codec uvcvideo snd_hwdep snd_pcm videobuf2_vmalloc videobuf2_memops snd_seq_midi videobuf2_core microcode snd_seq_midi_event videodev snd_rawmidi snd_seq i915 btusb snd_seq_device bluetooth psmouse snd_timer 6lowpan_iphc drm_kms_helper drm serio_raw snd soundcore i2c_algo_bit wmi ideapad_laptop sparse_keymap lpc_ich video mac_hid lp parport tg3 ahci ptp pps_core
>[  147.952579] CPU: 1 PID: 935 Comm: Xorg Not tainted 3.14.0-994-generic #201404170205
>[  147.952587] Hardware name: LENOVO                           INVALID         /Caucasus2                       , BIOS 24CN18WW   12/11/2009
>[  147.952595]  00000000 00000000 f4f5bac8 c169399b f8b84b18 f4f5baf8 c1059e14 f8b8e0b7
>[  147.952618]  f4f5bb24 000003a7 f8b84b18 0000264d f8b3806b f8b3806b f33c2000 f33c2650
>[  147.952640]  f33c230c f4f5bb10 c1059ed3 00000009 f4f5bb08 f8b8e0b7 f4f5bb24 f4f5bd98
>[  147.952662] Call Trace:
>[  147.952682]  [<c169399b>] dump_stack+0x41/0x52
>[  147.952700]  [<c1059e14>] warn_slowpath_common+0x84/0xa0
>[  147.952794]  [<f8b3806b>] ? check_crtc_state+0x26b/0x360 [i915]
>[  147.952885]  [<f8b3806b>] ? check_crtc_state+0x26b/0x360 [i915]
>[  147.952898]  [<c1059ed3>] warn_slowpath_fmt+0x33/0x40
>[  147.952991]  [<f8b3806b>] check_crtc_state+0x26b/0x360 [i915]
>[  147.953008]  [<c1310388>] ? vsnprintf+0x2c8/0x3f0
>[  147.953109]  [<f8b446c5>] intel_modeset_check_state+0x55/0x90 [i915]
>[  147.953201]  [<f8b44734>] intel_set_mode+0x34/0x40 [i915]
>[  147.953295]  [<f8b44fda>] intel_crtc_set_config+0x15a/0x2c0 [i915]
>[  147.953354]  [<f891b47e>] drm_mode_set_config_internal+0x4e/0xc0 [drm]
>[  147.953409]  [<f891eaff>] drm_mode_setcrtc+0x24f/0x4b0 [drm]
>[  147.953462]  [<f89107a6>] drm_ioctl+0x1f6/0x470 [drm]
>[  147.953517]  [<f891e8b0>] ? drm_mode_setplane+0x400/0x400 [drm]
>[  147.953537]  [<c118eeb1>] ? __sb_end_write+0x31/0x70
>[  147.953583]  [<f89105b0>] ? drm_ioctl_permit+0xa0/0xa0 [drm]
>[  147.953597]  [<c119d792>] do_vfs_ioctl+0x72/0x2e0
>[  147.953610]  [<c119da90>] SyS_ioctl+0x90/0xa0
>[  147.953624]  [<c16a790d>] sysenter_do_call+0x12/0x28
>[  147.953633] ---[ end trace a8c43adc1cbf8a7c ]---
>[  147.953643] [drm:intel_dump_pipe_config] [CRTC:7][hw state] config for pipe B
>[  147.953650] [drm:intel_dump_pipe_config] cpu_transcoder: B
>[  147.953658] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
>[  147.953668] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  147.953678] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  147.953684] [drm:intel_dump_pipe_config] requested mode:
>[  147.953698] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 800 0 0 0 600 0 0 0 0x0 0x0
>[  147.953705] [drm:intel_dump_pipe_config] adjusted mode:
>[  147.953717] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0xa
>[  147.953730] [drm:intel_dump_crtc_timings] crtc timings: 50397 800 1004 1140 1344 600 603 604 625, type: 0x0 flags: 0xa
>[  147.953737] [drm:intel_dump_pipe_config] port clock: 50397
>[  147.953745] [drm:intel_dump_pipe_config] pipe src size: 800x600
>[  147.953754] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[  147.953762] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[  147.953770] [drm:intel_dump_pipe_config] ips: 0
>[  147.953777] [drm:intel_dump_pipe_config] double wide: 0
>[  147.953785] [drm:intel_dump_pipe_config] [CRTC:7][sw state] config for pipe B
>[  147.953792] [drm:intel_dump_pipe_config] cpu_transcoder: B
>[  147.953799] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1
>[  147.953809] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  147.953819] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  147.953825] [drm:intel_dump_pipe_config] requested mode:
>[  147.953839] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 40000 800 840 968 1056 600 601 605 628 0x0 0x5
>[  147.953846] [drm:intel_dump_pipe_config] adjusted mode:
>[  147.953860] [drm:drm_mode_debug_printmodeline] Modeline 0:"1024x600" 60 50400 1024 1048 1184 1344 600 603 604 625 0x48 0xa
>[  147.953873] [drm:intel_dump_crtc_timings] crtc timings: 50400 800 1004 1140 1344 600 603 604 625, type: 0x48 flags: 0xa
>[  147.953880] [drm:intel_dump_pipe_config] port clock: 50400
>[  147.953888] [drm:intel_dump_pipe_config] pipe src size: 800x600
>[  147.953897] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00008000
>[  147.953905] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[  147.953912] [drm:intel_dump_pipe_config] ips: 0
>[  147.953919] [drm:intel_dump_pipe_config] double wide: 0
>[  147.955347] [drm:asle_set_backlight] bclp = 0x800000ff
>[  147.955362] [drm:asle_set_backlight] updating opregion backlight 255/255
>[  147.955372] [drm:intel_panel_actually_set_backlight] set backlight PWM = 13005
>[  147.963509] [drm:drm_mode_getconnector] [CONNECTOR:8:?]
>[  147.963537] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:8:LVDS-1]
>[  147.963553] [drm:intel_lvds_detect] [CONNECTOR:8:LVDS-1]
>[  147.963601] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:8:LVDS-1] probed modes :
>[  147.963626] [drm:drm_mode_debug_printmodeline] Modeline 11:"1024x600" 60 50400 1024 1048 1184 1344 600 603 604 625 0x48 0xa
>[  147.963650] [drm:drm_mode_getconnector] [CONNECTOR:8:?]
>[  147.965457] [drm:drm_mode_getconnector] [CONNECTOR:14:?]
>[  147.965483] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:14:VGA-1]
>[  147.965500] [drm:intel_crt_detect] [CONNECTOR:14:VGA-1] force=1
>[  147.979260] [drm:intel_crt_detect] CRT not detected via hotplug
>[  147.980386] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
>[  147.980400] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[  147.980408] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[  147.980416] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
>[  147.980733] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[  147.980744] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
>[  147.980751] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
>[  147.980765] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:14:VGA-1] disconnected
>[  147.982898] [drm:drm_mode_getconnector] [CONNECTOR:8:?]
>[  147.982915] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:8:LVDS-1]
>[  147.982923] [drm:intel_lvds_detect] [CONNECTOR:8:LVDS-1]
>[  147.982956] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:8:LVDS-1] probed modes :
>[  147.982970] [drm:drm_mode_debug_printmodeline] Modeline 11:"1024x600" 60 50400 1024 1048 1184 1344 600 603 604 625 0x48 0xa
>[  147.982985] [drm:drm_mode_getconnector] [CONNECTOR:8:?]
>[  147.984312] [drm:drm_mode_getconnector] [CONNECTOR:14:?]
>[  147.984328] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:14:VGA-1]
>[  147.984339] [drm:intel_crt_detect] [CONNECTOR:14:VGA-1] force=1
>[  147.994325] *** returned from xrandr --output LVDS1 --mode 800x600
>[  148.000237] [drm:intel_crt_detect] CRT not detected via hotplug
>[  148.004200] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
>[  148.004212] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[  148.004221] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[  148.004231] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
>[  148.004572] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[  148.004586] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
>[  148.004595] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
>[  148.004613] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:14:VGA-1] disconnected
>[  148.022525] [drm:drm_mode_getconnector] [CONNECTOR:8:?]
>[  148.022541] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:8:LVDS-1]
>[  148.022548] [drm:intel_lvds_detect] [CONNECTOR:8:LVDS-1]
>[  148.022573] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:8:LVDS-1] probed modes :
>[  148.022583] [drm:drm_mode_debug_printmodeline] Modeline 11:"1024x600" 60 50400 1024 1048 1184 1344 600 603 604 625 0x48 0xa
>[  148.022593] [drm:drm_mode_getconnector] [CONNECTOR:8:?]
>[  148.023262] [drm:drm_mode_getconnector] [CONNECTOR:14:?]
>[  148.023273] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:14:VGA-1]
>[  148.023280] [drm:intel_crt_detect] [CONNECTOR:14:VGA-1] force=1
>[  148.036211] [drm:intel_crt_detect] CRT not detected via hotplug
>[  148.040209] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
>[  148.040219] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[  148.040227] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[  148.040236] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
>[  148.040580] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[  148.040593] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
>[  148.040602] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
>[  148.040618] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:14:VGA-1] disconnected
>[  148.043114] [drm:drm_mode_getconnector] [CONNECTOR:8:?]
>[  148.043142] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:8:LVDS-1]
>[  148.043157] [drm:intel_lvds_detect] [CONNECTOR:8:LVDS-1]
>[  148.043207] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:8:LVDS-1] probed modes :
>[  148.043231] [drm:drm_mode_debug_printmodeline] Modeline 11:"1024x600" 60 50400 1024 1048 1184 1344 600 603 604 625 0x48 0xa
>[  148.043253] [drm:drm_mode_getconnector] [CONNECTOR:8:?]
>[  148.044664] [drm:drm_mode_getconnector] [CONNECTOR:14:?]
>[  148.044688] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:14:VGA-1]
>[  148.044704] [drm:intel_crt_detect] [CONNECTOR:14:VGA-1] force=1
>[  148.060215] [drm:intel_crt_detect] CRT not detected via hotplug
>[  148.064135] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
>[  148.064150] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[  148.064161] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[  148.064173] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
>[  148.064526] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[  148.064545] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
>[  148.064557] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
>[  148.064576] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:14:VGA-1] disconnected
>[  148.093747] [drm:drm_mode_getconnector] [CONNECTOR:8:?]
>[  148.093766] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:8:LVDS-1]
>[  148.093774] [drm:intel_lvds_detect] [CONNECTOR:8:LVDS-1]
>[  148.093807] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:8:LVDS-1] probed modes :
>[  148.093821] [drm:drm_mode_debug_printmodeline] Modeline 11:"1024x600" 60 50400 1024 1048 1184 1344 600 603 604 625 0x48 0xa
>[  148.093837] [drm:drm_mode_getconnector] [CONNECTOR:8:?]
>[  148.094833] [drm:drm_mode_getconnector] [CONNECTOR:14:?]
>[  148.094850] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:14:VGA-1]
>[  148.094861] [drm:intel_crt_detect] [CONNECTOR:14:VGA-1] force=1
>[  148.108188] [drm:intel_crt_detect] CRT not detected via hotplug
>[  148.112247] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
>[  148.112268] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[  148.112281] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[  148.112292] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
>[  148.112648] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[  148.112666] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
>[  148.112677] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
>[  148.112698] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:14:VGA-1] disconnected
>[  148.130774] [drm:drm_mode_getconnector] [CONNECTOR:8:?]
>[  148.130796] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:8:LVDS-1]
>[  148.130807] [drm:intel_lvds_detect] [CONNECTOR:8:LVDS-1]
>[  148.130843] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:8:LVDS-1] probed modes :
>[  148.130860] [drm:drm_mode_debug_printmodeline] Modeline 11:"1024x600" 60 50400 1024 1048 1184 1344 600 603 604 625 0x48 0xa
>[  148.130875] [drm:drm_mode_getconnector] [CONNECTOR:8:?]
>[  148.132135] [drm:drm_mode_getconnector] [CONNECTOR:14:?]
>[  148.132168] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:14:VGA-1]
>[  148.132182] [drm:intel_crt_detect] [CONNECTOR:14:VGA-1] force=1
>[  148.148194] [drm:intel_crt_detect] CRT not detected via hotplug
>[  148.152124] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
>[  148.152149] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[  148.152160] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[  148.152171] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
>[  148.152525] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[  148.152542] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
>[  148.152553] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
>[  148.152796] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:14:VGA-1] disconnected

Actions: View

Attachments on bug 77137: 97039 | 97040 | 97519

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.