Attachment 98116 Details for Bug 78028 – dmesg

dmesg

pm_rc6_residency.dmesg (text/plain), 83.01 KB, created by Guo Jinxian on 2014-04-28 09:09:29 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Guo Jinxian

Created: 2014-04-28 09:09:29 UTC

Size: 83.01 KB

patch

obsolete

>[    0.000000] Initializing cgroup subsys cpuset
>[    0.000000] Initializing cgroup subsys cpu
>[    0.000000] Initializing cgroup subsys cpuacct
>[    0.000000] Linux version 3.14.0_drm-intel-next-queued_b7c0d9_20140428+ (buildtopcommit@x-kernel) (gcc version 4.7.0 20120507 (Red Hat 4.7.0-5) (GCC) ) #2098 SMP Mon Apr 28 11:41:37 CST 2014
>[    0.000000] Command line: BOOT_IMAGE=kernels//nightly_parents/2014_04_28/drm-intel-next-queued/b7c0d9df97c10ec5693a838df2fd53058f8e9e96/bzImage_x86_64 root=/dev/sda2 drm.debug=0xe modules_path=kernels//nightly_parents/2014_04_28/drm-intel-next-queued/b7c0d9df97c10ec5693a838df2fd53058f8e9e96/modules_x86_64/lib/modules/3.14.0_drm-intel-next-queued_b7c0d9_20140428+ acpi_rsdp=0xab7e1014 kexec_jump_back_entry=0x040a8000
>[    0.000000] e820: BIOS-provided physical RAM map:
>[    0.000000] BIOS-e820: [mem 0x0000000000000100-0x0000000000057fff] usable
>[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable
>[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000a7f0afff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000a7f0b000-0x00000000a7f28fff] ACPI data
>[    0.000000] BIOS-e820: [mem 0x00000000a7f29000-0x00000000aaf4dfff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000aaf4e000-0x00000000ab5b5fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000ab5b6000-0x00000000ab7b5fff] ACPI NVS
>[    0.000000] BIOS-e820: [mem 0x00000000ab7b6000-0x00000000ab7e1fff] ACPI data
>[    0.000000] BIOS-e820: [mem 0x00000000ab7e2000-0x00000000ab7fefff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000014f7fffff] usable
>[    0.000000] NX (Execute Disable) protection: active
>[    0.000000] DMI not present or invalid.
>[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
>[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
>[    0.000000] No AGP bridge found
>[    0.000000] e820: last_pfn = 0x14f800 max_arch_pfn = 0x400000000
>[    0.000000] MTRR default type: write-back
>[    0.000000] MTRR fixed ranges enabled:
>[    0.000000]   00000-9FFFF write-back
>[    0.000000]   A0000-BFFFF uncachable
>[    0.000000]   C0000-FFFFF write-protect
>[    0.000000] MTRR variable ranges enabled:
>[    0.000000]   0 base 00C0000000 mask 7FC0000000 uncachable
>[    0.000000]   1 base 00B0000000 mask 7FF0000000 uncachable
>[    0.000000]   2 base 00AE000000 mask 7FFE000000 uncachable
>[    0.000000]   3 base 00AD000000 mask 7FFF000000 uncachable
>[    0.000000]   4 disabled
>[    0.000000]   5 disabled
>[    0.000000]   6 disabled
>[    0.000000]   7 disabled
>[    0.000000]   8 disabled
>[    0.000000]   9 disabled
>[    0.000000] x86 PAT enabled: cpu 0, old 0x7010600070106, new 0x7010600070106
>[    0.000000] e820: last_pfn = 0xab7ff max_arch_pfn = 0x400000000
>[    0.000000] Base memory trampoline at [ffff880000094000] 94000 size 24576
>[    0.000000] Using GB pages for direct mapping
>[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
>[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
>[    0.000000] BRK [0x03222000, 0x03222fff] PGTABLE
>[    0.000000] BRK [0x03223000, 0x03223fff] PGTABLE
>[    0.000000] BRK [0x03224000, 0x03224fff] PGTABLE
>[    0.000000] init_memory_mapping: [mem 0x14f600000-0x14f7fffff]
>[    0.000000]  [mem 0x14f600000-0x14f7fffff] page 2M
>[    0.000000] BRK [0x03225000, 0x03225fff] PGTABLE
>[    0.000000] init_memory_mapping: [mem 0x14c000000-0x14f5fffff]
>[    0.000000]  [mem 0x14c000000-0x14f5fffff] page 2M
>[    0.000000] init_memory_mapping: [mem 0x100000000-0x14bffffff]
>[    0.000000]  [mem 0x100000000-0x13fffffff] page 1G
>[    0.000000]  [mem 0x140000000-0x14bffffff] page 2M
>[    0.000000] init_memory_mapping: [mem 0x00100000-0xa7f0afff]
>[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
>[    0.000000]  [mem 0x00200000-0x3fffffff] page 2M
>[    0.000000]  [mem 0x40000000-0x7fffffff] page 1G
>[    0.000000]  [mem 0x80000000-0xa7dfffff] page 2M
>[    0.000000]  [mem 0xa7e00000-0xa7f0afff] page 4k
>[    0.000000] init_memory_mapping: [mem 0xa7f29000-0xaaf4dfff]
>[    0.000000]  [mem 0xa7f29000-0xa7ffffff] page 4k
>[    0.000000]  [mem 0xa8000000-0xaadfffff] page 2M
>[    0.000000]  [mem 0xaae00000-0xaaf4dfff] page 4k
>[    0.000000] BRK [0x03226000, 0x03226fff] PGTABLE
>[    0.000000] init_memory_mapping: [mem 0xab7e2000-0xab7fefff]
>[    0.000000]  [mem 0xab7e2000-0xab7fefff] page 4k
>[    0.000000] BRK [0x03227000, 0x03227fff] PGTABLE
>[    0.000000] ACPI: RSDP 00000000ab7e1014 000024 (v02 INTEL )
>[    0.000000] ACPI: XSDT 00000000ab7c9188 000114 (v01 INTEL   BDW-ULT 00000000      01000013)
>[    0.000000] ACPI: FACP 00000000ab7d7000 0000F4 (v05 INTEL   BDW-ULT 00000000 MSFT 0000005F)
>[    0.000000] ACPI: DSDT 00000000a7f0b000 01DFE9 (v02 INTEL  BDW      00000000 INTL 20130927)
>[    0.000000] ACPI: FACS 00000000ab799000 000040
>[    0.000000] ACPI: TCPA 00000000ab7df000 000032 (v02 INTEL  EDK2     00000002      01000013)
>[    0.000000] ACPI: UEFI 00000000ab79c000 000042 (v01 INTEL  EDK2     00000002      01000013)
>[    0.000000] ACPI: SSDT 00000000ab7de000 0004B5 (v01 Intel_ Tpm2Tabl 00001000 INTL 20130927)
>[    0.000000] ACPI: SSDT 00000000ab7dd000 00004E (v01 MeSsdt  MeSsdt  00003000 INTL 20130927)
>[    0.000000] ACPI: TPM2 00000000ab7dc000 000034 (v03                 00000000      00000000)
>[    0.000000] ACPI: SSDT 00000000ab7db000 0005B1 (v01  Intel PerfTune 00001000 INTL 20130927)
>[    0.000000] ACPI: DBGP 00000000ab7da000 000034 (v01 INTEL           00000000 MSFT 0000005F)
>[    0.000000] ACPI: DBG2 00000000ab7d9000 000054 (v00 INTEL           00000000 MSFT 0000005F)
>[    0.000000] ACPI: LPIT 00000000ab7d8000 000094 (v01 INTEL   BDW-ULT 00000000 MSFT 0000005F)
>[    0.000000] ACPI: HPET 00000000ab7d6000 000038 (v01 INTEL   BDW-ULT 00000001 MSFT 0000005F)
>[    0.000000] ACPI: APIC 00000000ab7d5000 0000BC (v01 INTEL   BDW-ULT 00000001 MSFT 0000005F)
>[    0.000000] ACPI: MCFG 00000000ab7d4000 00003C (v01 INTEL   BDW-ULT 00000001 MSFT 0000005F)
>[    0.000000] ACPI: WDAT 00000000ab7d3000 000104 (v01 INTEL   BDW-ULT 00000000 MSFT 0000005F)
>[    0.000000] ACPI: SSDT 00000000ab7d2000 000250 (v01 INTEL  sensrhub 00000000 INTL 20130927)
>[    0.000000] ACPI: SSDT 00000000ab7cf000 002E26 (v01 INTEL  PtidDevc 00001000 INTL 20130927)
>[    0.000000] ACPI: SSDT 00000000ab7ce000 000C7D (v01 INTEL  Ther_Rvp 00001000 INTL 20130927)
>[    0.000000] ACPI: SSDT 00000000ab7cd000 00017F (v01 INTEL     zpodd 00001000 INTL 20130927)
>[    0.000000] ACPI: BOOT 00000000ab7cc000 000028 (v01  INTEL TIANO    00000002 MSFT 01000013)
>[    0.000000] ACPI: SSDT 00000000ab7cb000 00053B (v01  PmRef  Cpu0Ist 00003000 INTL 20130927)
>[    0.000000] ACPI: SSDT 00000000ab7ca000 000B74 (v01 CpuRef  CpuSsdt 00003000 INTL 20130927)
>[    0.000000] ACPI: SSDT 00000000ab7c2000 006F06 (v01 SaSsdt  SaSsdt  00003000 INTL 20130927)
>[    0.000000] ACPI: SSDT 00000000ab7e0000 0006A7 (v01 CppcTa CppcTabl 00001000 INTL 20130927)
>[    0.000000] ACPI: PCCT 00000000ab7c1000 00006E (v05 PcctTa PcctTabl 00001000 INTL 20130927)
>[    0.000000] ACPI: SSDT 00000000ab7c0000 000AC4 (v01 Cpc_Ta Cpc_Tabl 00001000 INTL 20130927)
>[    0.000000] ACPI: CSRT 00000000ab7bf000 0000C4 (v01   INTL  BDW-ULT 00000001 INTL 20100528)
>[    0.000000] ACPI: DMAR 00000000ab7be000 0000F0 (v01 INTEL      BDW  00000001 INTL 00000001)
>[    0.000000] ACPI: FPDT 00000000ab7bd000 000044 (v01 INTEL  EDK2     00000002      01000013)
>[    0.000000] ACPI: ASF! 00000000ab7bc000 0000A0 (v32 INTEL       HCG 00000001 TFSM 000F4240)
>[    0.000000] ACPI: BGRT 00000000ab7bb000 000038 (v01 INTEL  EDK2     00000002      01000013)
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] No NUMA configuration found
>[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000014f7fffff]
>[    0.000000] Initmem setup node 0 [mem 0x00000000-0x14f7fffff]
>[    0.000000]   NODE_DATA [mem 0x14f7fa000-0x14f7fdfff]
>[    0.000000]  [ffffea0000000000-ffffea00053fffff] PMD -> [ffff88014ae00000-ffff88014edfffff] on node 0
>[    0.000000] Zone ranges:
>[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
>[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
>[    0.000000]   Normal   [mem 0x100000000-0x14f7fffff]
>[    0.000000] Movable zone start for each node
>[    0.000000] Early memory node ranges
>[    0.000000]   node   0: [mem 0x00001000-0x00057fff]
>[    0.000000]   node   0: [mem 0x00059000-0x0009efff]
>[    0.000000]   node   0: [mem 0x00100000-0xa7f0afff]
>[    0.000000]   node   0: [mem 0xa7f29000-0xaaf4dfff]
>[    0.000000]   node   0: [mem 0xab7e2000-0xab7fefff]
>[    0.000000]   node   0: [mem 0x100000000-0x14f7fffff]
>[    0.000000] On node 0 totalpages: 1025770
>[    0.000000]   DMA zone: 64 pages used for memmap
>[    0.000000]   DMA zone: 26 pages reserved
>[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
>[    0.000000]   DMA32 zone: 10878 pages used for memmap
>[    0.000000]   DMA32 zone: 696141 pages, LIFO batch:31
>[    0.000000]   Normal zone: 5088 pages used for memmap
>[    0.000000]   Normal zone: 325632 pages, LIFO batch:31
>[    0.000000] ACPI: PM-Timer IO Port: 0x1808
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0xff] disabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0xff] disabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0xff] disabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0xff] disabled)
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
>[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>[    0.000000] ACPI: IRQ0 used by override.
>[    0.000000] ACPI: IRQ2 used by override.
>[    0.000000] ACPI: IRQ9 used by override.
>[    0.000000] Using ACPI (MADT) for SMP configuration information
>[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
>[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
>[    0.000000] nr_irqs_gsi: 56
>[    0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
>[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xa7f0b000-0xa7f28fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xaaf4e000-0xab5b5fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xab5b6000-0xab7b5fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xab7b6000-0xab7e1fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xab7ff000-0xad7fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xad800000-0xaf7fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xaf800000-0xe00f7fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xe00f8000-0xe00f8fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xe00f9000-0xfed1bfff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xff9fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xffa00000-0xffffffff]
>[    0.000000] e820: [mem 0xaf800000-0xe00f7fff] available for PCI devices
>[    0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
>[    0.000000] PERCPU: Embedded 26 pages/cpu @ffff88014f400000 s74560 r8192 d23744 u262144
>[    0.000000] pcpu-alloc: s74560 r8192 d23744 u262144 alloc=1*2097152
>[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
>[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1009714
>[    0.000000] Policy zone: Normal
>[    0.000000] Kernel command line: BOOT_IMAGE=kernels//nightly_parents/2014_04_28/drm-intel-next-queued/b7c0d9df97c10ec5693a838df2fd53058f8e9e96/bzImage_x86_64 root=/dev/sda2 drm.debug=0xe modules_path=kernels//nightly_parents/2014_04_28/drm-intel-next-queued/b7c0d9df97c10ec5693a838df2fd53058f8e9e96/modules_x86_64/lib/modules/3.14.0_drm-intel-next-queued_b7c0d9_20140428+ acpi_rsdp=0xab7e1014 kexec_jump_back_entry=0x040a8000
>[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
>[    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
>[    0.000000] Checking aperture...
>[    0.000000] No AGP bridge found
>[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
>[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>[    0.000000] Memory: 3935448K/4103080K available (7316K kernel code, 706K rwdata, 3552K rodata, 22728K init, 596K bss, 167632K reserved)
>[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
>[    0.000000] Hierarchical RCU implementation.
>[    0.000000] 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
>[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
>[    0.000000] NR_IRQS:4352 nr_irqs:1016 16
>[    0.000000] Console: colour dummy device 80x25
>[    0.000000] console [tty0] enabled
>[    0.000000] hpet clockevent registered
>[    0.000000] tsc: Fast TSC calibration using PIT
>[    0.000000] tsc: Detected 1795.755 MHz processor
>[    0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 3591.51 BogoMIPS (lpj=1795755)
>[    0.000008] pid_max: default: 32768 minimum: 301
>[    0.000017] ACPI: Core revision 20131218
>[    0.022345] ACPI: All ACPI Tables successfully acquired
>[    0.022378] Security Framework initialized
>[    0.022685] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
>[    0.023560] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
>[    0.023959] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
>[    0.023968] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
>[    0.024198] CPU: Physical Processor ID: 0
>[    0.024202] CPU: Processor Core ID: 0
>[    0.025414] mce: CPU supports 7 MCE banks
>[    0.025427] CPU0: Thermal LVT vector (0xfa) already installed
>[    0.025436] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
>[    0.025436] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
>[    0.025436] tlb_flushall_shift: 6
>[    0.025899] Freeing SMP alternatives memory: 32K (ffffffff83184000 - ffffffff8318c000)
>[    0.026577] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>[    0.036588] smpboot: CPU0: Intel(R) Core(TM) i5-5###U CPU @ 1.80GHz (fam: 06, model: 3d, stepping: 04)
>[    0.036598] TSC deadline timer enabled
>[    0.036608] Performance Events: PEBS fmt2+, generic architected perfmon, full-width counters, Intel PMU driver.
>[    0.036617] ... version:                3
>[    0.036619] ... bit width:              48
>[    0.036621] ... generic registers:      4
>[    0.036623] ... value mask:             0000ffffffffffff
>[    0.036626] ... max period:             0000ffffffffffff
>[    0.036628] ... fixed-purpose events:   3
>[    0.036630] ... event mask:             000000070000000f
>[    0.036869] x86: Booting SMP configuration:
>[    0.036873] .... node  #0, CPUs:      #1
>[    0.049236] CPU1: Thermal LVT vector (0xfa) already installed
>[    0.051362]  #2<7>[    0.063764] CPU2: Thermal LVT vector (0xfa) already installed
>[    0.078258]  #3
>[    0.078258] CPU3: Thermal LVT vector (0xfa) already installed
>[    0.080337] x86: Booted up 1 node, 4 CPUs
>[    0.080344] smpboot: Total of 4 processors activated (14366.04 BogoMIPS)
>[    0.085535] devtmpfs: initialized
>[    0.085938] PM: Registering ACPI NVS region [mem 0xab5b6000-0xab7b5fff] (2097152 bytes)
>[    0.086127] xor: automatically using best checksumming function:
>[    0.095276]    avx       : 17112.000 MB/sec
>[    0.095305] RTC time: 19:58:35, date: 04/28/14
>[    0.095348] NET: Registered protocol family 16
>[    0.095773] cpuidle: using governor ladder
>[    0.095776] cpuidle: using governor menu
>[    0.095915] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
>[    0.095918] ACPI: bus type PCI registered
>[    0.095981] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
>[    0.095985] PCI: not using MMCONFIG
>[    0.095988] PCI: Using configuration type 1 for base access
>[    0.106175] bio: create slab <bio-0> at 0
>[    0.122314] raid6: sse2x1    5523 MB/s
>[    0.139331] raid6: sse2x2    6632 MB/s
>[    0.156351] raid6: sse2x4    7960 MB/s
>[    0.173368] raid6: avx2x1   10832 MB/s
>[    0.190382] raid6: avx2x2   12347 MB/s
>[    0.207401] raid6: avx2x4   14398 MB/s
>[    0.207403] raid6: using algorithm avx2x4 (14398 MB/s)
>[    0.207406] raid6: using avx2x2 recovery algorithm
>[    0.207467] ACPI: Added _OSI(Module Device)
>[    0.207470] ACPI: Added _OSI(Processor Device)
>[    0.207472] ACPI: Added _OSI(3.0 _SCP Extensions)
>[    0.207475] ACPI: Added _OSI(Processor Aggregator Device)
>[    0.219694] ACPI: Executed 18 blocks of module-level executable AML code
>[    0.253616] ACPI: SSDT 00000000ab57ca18 0004AE (v01  PmRef  Cpu0Cst 00003001 INTL 20130927)
>[    0.254581] ACPI: Dynamic OEM Table Load:
>[    0.254585] ACPI: SSDT           (null) 0004AE (v01  PmRef  Cpu0Cst 00003001 INTL 20130927)
>[    0.259780] ACPI: SSDT 00000000ab57d818 000792 (v01  PmRef    ApIst 00003000 INTL 20130927)
>[    0.260819] ACPI: Dynamic OEM Table Load:
>[    0.260823] ACPI: SSDT           (null) 000792 (v01  PmRef    ApIst 00003000 INTL 20130927)
>[    0.265623] ACPI: SSDT 00000000ab57bd98 000119 (v01  PmRef    ApCst 00003000 INTL 20130927)
>[    0.266585] ACPI: Dynamic OEM Table Load:
>[    0.266588] ACPI: SSDT           (null) 000119 (v01  PmRef    ApCst 00003000 INTL 20130927)
>[    0.274922] ACPI: Interpreter enabled
>[    0.274932] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131218/hwxface-580)
>[    0.274942] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-580)
>[    0.274967] ACPI: (supports S0 S3 S4 S5)
>[    0.274970] ACPI: Using IOAPIC for interrupt routing
>[    0.274995] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
>[    0.277338] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
>[    0.288398] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>[    0.289154] ACPI: ACPI Dock Station Driver: 1 docks/bays found
>[    0.289893] ACPI: Power Resource [PG00] (on)
>[    0.294964] ACPI: Power Resource [PG01] (on)
>[    0.302961] ACPI: Power Resource [PG02] (on)
>[    0.362307] ACPI: Power Resource [FN00] (off)
>[    0.362440] ACPI: Power Resource [FN01] (off)
>[    0.362567] ACPI: Power Resource [FN02] (off)
>[    0.362695] ACPI: Power Resource [FN03] (off)
>[    0.362830] ACPI: Power Resource [FN04] (off)
>[    0.364208] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
>[    0.364218] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
>[    0.364771] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
>[    0.365409] PCI host bridge to bus 0000:00
>[    0.365414] pci_bus 0000:00: root bus resource [bus 00-fe]
>[    0.365418] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
>[    0.365421] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
>[    0.365425] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
>[    0.365428] pci_bus 0000:00: root bus resource [mem 0xaf800000-0xfeafffff]
>[    0.365439] pci 0000:00:00.0: [8086:1604] type 00 class 0x060000
>[    0.365751] pci 0000:00:02.0: [8086:1616] type 00 class 0x030000
>[    0.365766] pci 0000:00:02.0: reg 0x10: [mem 0xc0000000-0xc0ffffff 64bit]
>[    0.365775] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
>[    0.365782] pci 0000:00:02.0: reg 0x20: [io  0x3000-0x303f]
>[    0.366055] pci 0000:00:03.0: [8086:160c] type 00 class 0x040300
>[    0.366064] pci 0000:00:03.0: reg 0x10: [mem 0xc1030000-0xc1033fff 64bit]
>[    0.366355] pci 0000:00:14.0: [8086:9cb1] type 00 class 0x0c0330
>[    0.366375] pci 0000:00:14.0: reg 0x10: [mem 0xc1020000-0xc102ffff 64bit]
>[    0.366437] pci 0000:00:14.0: PME# supported from D3hot D3cold
>[    0.366644] pci 0000:00:14.0: System wakeup disabled by ACPI
>[    0.366713] pci 0000:00:16.0: [8086:9cba] type 00 class 0x078000
>[    0.366734] pci 0000:00:16.0: reg 0x10: [mem 0xc1035000-0xc103501f 64bit]
>[    0.366800] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
>[    0.367068] pci 0000:00:19.0: [8086:15a2] type 00 class 0x020000
>[    0.367086] pci 0000:00:19.0: reg 0x10: [mem 0xc1000000-0xc101ffff]
>[    0.367094] pci 0000:00:19.0: reg 0x14: [mem 0xc1038000-0xc1038fff]
>[    0.367103] pci 0000:00:19.0: reg 0x18: [io  0x3080-0x309f]
>[    0.367165] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
>[    0.367371] pci 0000:00:19.0: System wakeup disabled by ACPI
>[    0.367441] pci 0000:00:1f.0: [8086:9cc3] type 00 class 0x060100
>[    0.367813] pci 0000:00:1f.2: [8086:9c83] type 00 class 0x010601
>[    0.367830] pci 0000:00:1f.2: reg 0x10: [io  0x30a8-0x30af]
>[    0.367837] pci 0000:00:1f.2: reg 0x14: [io  0x30b4-0x30b7]
>[    0.367849] pci 0000:00:1f.2: reg 0x18: [io  0x30a0-0x30a7]
>[    0.367860] pci 0000:00:1f.2: reg 0x1c: [io  0x30b0-0x30b3]
>[    0.367868] pci 0000:00:1f.2: reg 0x20: [io  0x3060-0x307f]
>[    0.367876] pci 0000:00:1f.2: reg 0x24: [mem 0xc1037000-0xc10377ff]
>[    0.367914] pci 0000:00:1f.2: PME# supported from D3hot
>[    0.368166] pci 0000:00:1f.3: [8086:9ca2] type 00 class 0x0c0500
>[    0.368181] pci 0000:00:1f.3: reg 0x10: [mem 0xc1034000-0xc10340ff 64bit]
>[    0.368203] pci 0000:00:1f.3: reg 0x20: [io  0xefa0-0xefbf]
>[    0.368471] pci 0000:00:1f.6: [8086:9ca4] type 00 class 0x118000
>[    0.368501] pci 0000:00:1f.6: reg 0x10: [mem 0xc1036000-0xc1036fff 64bit]
>[    0.368833] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
>[    0.374948] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15), disabled.
>[    0.375008] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    0.375064] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15), disabled.
>[    0.375118] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15), disabled.
>[    0.375172] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *10 11 12 14 15), disabled.
>[    0.375226] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    0.375280] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    0.375334] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    0.375634] ACPI: Enabled 4 GPEs in block 00 to 7F
>[    0.375857] ACPI : EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62
>[    0.376037] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
>[    0.376042] vgaarb: loaded
>[    0.376045] vgaarb: bridge control possible 0000:00:02.0
>[    0.376182] SCSI subsystem initialized
>[    0.376291] libata version 3.00 loaded.
>[    0.376424] ACPI: bus type USB registered
>[    0.376490] usbcore: registered new interface driver usbfs
>[    0.376524] usbcore: registered new interface driver hub
>[    0.376570] usbcore: registered new device driver usb
>[    0.376674] pps_core: LinuxPPS API ver. 1 registered
>[    0.376677] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
>[    0.376703] PTP clock support registered
>[    0.376846] PCI: Using ACPI for IRQ routing
>[    0.383021] PCI: pci_cache_line_size set to 64 bytes
>[    0.383049] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
>[    0.383051] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
>[    0.383052] e820: reserve RAM buffer [mem 0xa7f0b000-0xa7ffffff]
>[    0.383054] e820: reserve RAM buffer [mem 0xaaf4e000-0xabffffff]
>[    0.383056] e820: reserve RAM buffer [mem 0xab7ff000-0xabffffff]
>[    0.383057] e820: reserve RAM buffer [mem 0x14f800000-0x14fffffff]
>[    0.383243] NetLabel: Initializing
>[    0.383246] NetLabel:  domain hash size = 128
>[    0.383248] NetLabel:  protocols = UNLABELED CIPSOv4
>[    0.383262] NetLabel:  unlabeled traffic allowed by default
>[    0.383416] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
>[    0.383425] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
>[    0.385453] Switched to clocksource hpet
>[    0.385533] pnp: PnP ACPI init
>[    0.385544] ACPI: bus type PNP registered
>[    0.385883] system 00:00: [io  0x06a4] has been reserved
>[    0.385887] system 00:00: [io  0x06a0] has been reserved
>[    0.385892] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.385994] pnp 00:01: [dma 4]
>[    0.386046] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
>[    0.386104] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
>[    0.386248] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
>[    0.386341] system 00:04: [io  0x0680-0x069f] has been reserved
>[    0.386346] system 00:04: [io  0xffff] has been reserved
>[    0.386349] system 00:04: [io  0xffff] has been reserved
>[    0.386352] system 00:04: [io  0xffff] has been reserved
>[    0.386356] system 00:04: [io  0x1800-0x18fe] could not be reserved
>[    0.386360] system 00:04: [io  0x164e-0x164f] has been reserved
>[    0.386364] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.386459] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
>[    0.386538] system 00:06: [io  0x1854-0x1857] has been reserved
>[    0.386543] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
>[    0.386704] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
>[    0.386864] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
>[    0.387561] system 00:09: [mem 0xfe102000-0xfe102fff] has been reserved
>[    0.387566] system 00:09: [mem 0xfe104000-0xfe104fff] has been reserved
>[    0.387569] system 00:09: [mem 0xfe106000-0xfe106fff] has been reserved
>[    0.387573] system 00:09: [mem 0xfe10e000-0xfe10efff] has been reserved
>[    0.387577] system 00:09: [mem 0xfe112000-0xfe112fff] has been reserved
>[    0.387581] system 00:09: [mem 0xfe111000-0xfe111007] has been reserved
>[    0.387584] system 00:09: [mem 0xfe111014-0xfe111fff] has been reserved
>[    0.387589] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.387735] pnp 00:0a: Plug and Play ACPI device, IDs INT3437 (active)
>[    0.399568] pnp 00:0b: Plug and Play ACPI device, IDs INT3432 (active)
>[    0.404566] pnp 00:0c: Plug and Play ACPI device, IDs INT3433 (active)
>[    0.405300] system 00:0d: [mem 0xfed1c000-0xfed1ffff] has been reserved
>[    0.405305] system 00:0d: [mem 0xfed10000-0xfed17fff] has been reserved
>[    0.405308] system 00:0d: [mem 0xfed18000-0xfed18fff] has been reserved
>[    0.405312] system 00:0d: [mem 0xfed19000-0xfed19fff] has been reserved
>[    0.405316] system 00:0d: [mem 0xe0000000-0xefffffff] could not be reserved
>[    0.405320] system 00:0d: [mem 0xfed20000-0xfed3ffff] has been reserved
>[    0.405323] system 00:0d: [mem 0xfed90000-0xfed93fff] has been reserved
>[    0.405327] system 00:0d: [mem 0xfed45000-0xfed8ffff] has been reserved
>[    0.405331] system 00:0d: [mem 0xff000000-0xffffffff] could not be reserved
>[    0.405334] system 00:0d: [mem 0xfee00000-0xfeefffff] has been reserved
>[    0.405338] system 00:0d: [mem 0xaf810000-0xaf81ffff] has been reserved
>[    0.405342] system 00:0d: [mem 0xaf800000-0xaf80ffff] has been reserved
>[    0.405346] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.405684] system 00:0e: [mem 0x00000000-0x0009cfff] could not be reserved
>[    0.405689] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
>[    0.405835] pnp: PnP ACPI: found 15 devices
>[    0.405838] ACPI: bus type PNP unregistered
>[    0.414863] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
>[    0.414866] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
>[    0.414869] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
>[    0.414871] pci_bus 0000:00: resource 7 [mem 0xaf800000-0xfeafffff]
>[    0.414901] NET: Registered protocol family 2
>[    0.415057] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
>[    0.415137] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
>[    0.415211] TCP: Hash tables configured (established 32768 bind 32768)
>[    0.415236] TCP: reno registered
>[    0.415246] UDP hash table entries: 2048 (order: 4, 65536 bytes)
>[    0.415266] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
>[    0.415327] NET: Registered protocol family 1
>[    0.415400] RPC: Registered named UNIX socket transport module.
>[    0.415403] RPC: Registered udp transport module.
>[    0.415405] RPC: Registered tcp transport module.
>[    0.415408] RPC: Registered tcp NFSv4.1 backchannel transport module.
>[    0.415416] pci 0000:00:02.0: Boot video device
>[    0.415515] pci 0000:00:14.0: can't derive routing for PCI INT A
>[    0.415519] pci 0000:00:14.0: PCI INT A: no GSI - using ISA IRQ 11
>[    0.415615] pci 0000:00:14.0: can't derive routing for PCI INT A
>[    0.415633] PCI: CLS 0 bytes, default 64
>[    0.937435] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>[    0.937444] software IO TLB [mem 0xa3f0b000-0xa7f0b000] (64MB) mapped at [ffff8800a3f0b000-ffff8800a7f0afff]
>[    0.937599] Simple Boot Flag at 0x47 set to 0x1
>[    0.939029] futex hash table entries: 2048 (order: 5, 131072 bytes)
>[    0.939086] audit: initializing netlink subsys (disabled)
>[    0.939097] audit: type=2000 audit(1398715115.902:1): initialized
>[    0.970058] HugeTLB registered 2 MB page size, pre-allocated 0 pages
>[    0.973559] VFS: Disk quotas dquot_6.5.2
>[    0.973642] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>[    0.975107] NFS: Registering the id_resolver key type
>[    0.975118] Key type id_resolver registered
>[    0.975120] Key type id_legacy registered
>[    0.975125] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>[    0.975401] fuse init (API version 7.22)
>[    0.975592] msgmni has been set to 7686
>[    0.975932] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
>[    0.975937] io scheduler noop registered
>[    0.975939] io scheduler deadline registered
>[    0.976000] io scheduler cfq registered (default)
>[    0.976192] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>[    0.976323] efifb: probing for efifb
>[    0.976745] efifb: framebuffer at 0xb0000000, mapped to 0xffffc90010880000, using 8100k, total 8100k
>[    0.976749] efifb: mode is 1920x1080x32, linelength=7680, pages=2032
>[    0.976752] efifb: scrolling: redraw
>[    0.976755] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
>[    0.983546] Console: switching to colour frame buffer device 240x67
>[    0.989820] fb0: EFI VGA frame buffer device
>[    0.990001] ACPI: Fan [FAN0] (off)
>[    0.990080] ACPI: Fan [FAN1] (off)
>[    0.990161] ACPI: Fan [FAN2] (off)
>[    0.990242] ACPI: Fan [FAN3] (off)
>[    0.990321] ACPI: Fan [FAN4] (off)
>[    0.990752] Monitor-Mwait will be used to enter C-1 state
>[    0.992899] thermal LNXTHERM:00: registered as thermal_zone0
>[    0.992933] ACPI: Thermal Zone [TZ00] (44 C)
>[    0.993722] thermal LNXTHERM:01: registered as thermal_zone1
>[    0.993754] ACPI: Thermal Zone [TZ01] (44 C)
>[    0.993878] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>[    1.014578] 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
>[    1.015445] Non-volatile memory driver v1.3
>[    1.015471] Linux agpgart interface v0.103
>[    1.017992] brd: module loaded
>[    1.018351] Loading iSCSI transport class v2.0-870.
>[    1.018953] iscsi: registered transport (tcp)
>[    1.019134] Adaptec aacraid driver 1.2-0[30200]-ms
>[    1.019209] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
>[    1.019428] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.06.00.12-k.
>[    1.019560] iscsi: registered transport (qla4xxx)
>[    1.019628] QLogic iSCSI HBA Driver
>[    1.019730] DC390: clustering now enabled by default. If you get problems load
>[    1.019769]        with "disable_clustering=1" and report to maintainers
>[    1.019885] GDT-HA: Storage RAID Controller Driver. Version: 3.05
>[    1.020036] RocketRAID 3xxx/4xxx Controller driver v1.8
>[    1.020107] stex: Promise SuperTrak EX Driver version: 4.6.0000.4
>[    1.020234] st: Version 20101219, fixed bufsize 32768, s/g segs 256
>[    1.020343] osst :I: Tape driver with OnStream support version 0.99.4
>[    1.020343] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
>[    1.020625] SCSI Media Changer driver v0.25 
>[    1.020732] ahci 0000:00:1f.2: version 3.0
>[    1.020862] ahci 0000:00:1f.2: irq 56 for MSI/MSI-X
>[    1.031261] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x2 impl SATA mode
>[    1.031307] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst 
>[    1.032136] scsi0 : ahci
>[    1.032330] scsi1 : ahci
>[    1.032485] scsi2 : ahci
>[    1.032639] scsi3 : ahci
>[    1.034093] ata1: DUMMY
>[    1.035433] ata2: SATA max UDMA/133 abar m2048@0xc1037000 port 0xc1037180 irq 56
>[    1.036794] ata3: DUMMY
>[    1.038133] ata4: DUMMY
>[    1.041899] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.20 (March 14, 2014)
>[    1.043279] bnx2x: Broadcom NetXtreme II 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.78.17-0 (2013/04/11)
>[    1.044764] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
>[    1.046169] e100: Copyright(c) 1999-2006 Intel Corporation
>[    1.047611] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
>[    1.049008] e1000: Copyright (c) 1999-2006 Intel Corporation.
>[    1.050469] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
>[    1.051874] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
>[    1.053428] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
>[    1.054864] e1000e 0000:00:19.0: irq 57 for MSI/MSI-X
>[    1.217686] e1000e 0000:00:19.0 eth0: registered PHC clock
>[    1.219110] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 88:88:88:88:87:88
>[    1.220549] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
>[    1.222029] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
>[    1.223515] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.5-k
>[    1.224963] igb: Copyright (c) 2007-2013 Intel Corporation.
>[    1.226503] usbcore: registered new interface driver zd1201
>[    1.227976] usbcore: registered new interface driver catc
>[    1.229432] usbcore: registered new interface driver kaweth
>[    1.230823] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
>[    1.232283] usbcore: registered new interface driver pegasus
>[    1.233732] usbcore: registered new interface driver rtl8150
>[    1.235168] usbcore: registered new interface driver asix
>[    1.236586] usbcore: registered new interface driver ax88179_178a
>[    1.238008] usbcore: registered new interface driver cdc_ether
>[    1.239445] usbcore: registered new interface driver dm9601
>[    1.240873] usbcore: registered new interface driver gl620a
>[    1.242309] usbcore: registered new interface driver net1080
>[    1.243724] usbcore: registered new interface driver plusb
>[    1.245122] usbcore: registered new interface driver rndis_host
>[    1.246517] usbcore: registered new interface driver cdc_subset
>[    1.247885] usbcore: registered new interface driver zaurus
>[    1.249241] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
>[    1.250592] usbcore: registered new interface driver cdc_ncm
>[    1.252074] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>[    1.253377] ehci-pci: EHCI PCI platform driver
>[    1.254752] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>[    1.256063] ohci-pci: OHCI PCI platform driver
>[    1.257415] uhci_hcd: USB Universal Host Controller Interface driver
>[    1.258877] xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A
>[    1.260202] xhci_hcd 0000:00:14.0: PCI INT A: no GSI - using ISA IRQ 11
>[    1.261526] xhci_hcd 0000:00:14.0: xHCI Host Controller
>[    1.262877] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
>[    1.264455] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
>[    1.264476] xhci_hcd 0000:00:14.0: irq 58 for MSI/MSI-X
>[    1.264538] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>[    1.265828] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.267114] usb usb1: Product: xHCI Host Controller
>[    1.268384] usb usb1: Manufacturer: Linux 3.14.0_drm-intel-next-queued_b7c0d9_20140428+ xhci_hcd
>[    1.269689] usb usb1: SerialNumber: 0000:00:14.0
>[    1.271168] hub 1-0:1.0: USB hub found
>[    1.272467] hub 1-0:1.0: 11 ports detected
>[    1.277302] xhci_hcd 0000:00:14.0: xHCI Host Controller
>[    1.278649] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
>[    1.279957] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
>[    1.281234] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.282495] usb usb2: Product: xHCI Host Controller
>[    1.283736] usb usb2: Manufacturer: Linux 3.14.0_drm-intel-next-queued_b7c0d9_20140428+ xhci_hcd
>[    1.285027] usb usb2: SerialNumber: 0000:00:14.0
>[    1.286506] hub 2-0:1.0: USB hub found
>[    1.287822] hub 2-0:1.0: 4 ports detected
>[    1.290624] usbcore: registered new interface driver usb-storage
>[    1.292054] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
>[    1.293386] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
>[    1.295202] serio: i8042 KBD port at 0x60,0x64 irq 1
>[    1.296697] mousedev: PS/2 mouse device common for all mice
>[    1.298194] rtc_cmos 00:05: RTC can wake from S4
>[    1.299681] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
>[    1.301028] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
>[    1.302403] i2c /dev entries driver
>[    1.303839] hidraw: raw HID events driver (C) Jiri Kosina
>[    1.305951] usbcore: registered new interface driver usbhid
>[    1.307275] usbhid: USB HID core driver
>[    1.308714] TCP: cubic registered
>[    1.309991] Initializing XFRM netlink socket
>[    1.311277] NET: Registered protocol family 17
>[    1.312573] Key type dns_resolver registered
>[    1.314479] registered taskstats version 1
>[    1.316154] bio: create slab <bio-1> at 1
>[    1.317743] Btrfs loaded
>[    1.319236]   Magic number: 10:550:1002
>[    1.320504] system 00:04: hash matches
>[    1.321848] PM: Hibernation image not present or could not be loaded.
>[    1.321866] Warning: unable to open an initial console.
>[    1.338316] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
>[    1.345145] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[    1.346693] ata2.00: ATA-9: INTEL SSDSC2BB240G4, D2010370, max UDMA/133
>[    1.347997] ata2.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 31/32)
>[    1.349611] ata2.00: configured for UDMA/133
>[    1.351046] scsi 1:0:0:0: Direct-Access     ATA      INTEL SSDSC2BB24 D201 PQ: 0 ANSI: 5
>[    1.352656] sd 1:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/223 GiB)
>[    1.352767] sd 1:0:0:0: Attached scsi generic sg0 type 0
>[    1.355480] sd 1:0:0:0: [sda] 4096-byte physical blocks
>[    1.356922] sd 1:0:0:0: [sda] Write Protect is off
>[    1.358345] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[    1.358357] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    1.361231]  sda: sda1 sda2 sda3
>[    1.363033] sd 1:0:0:0: [sda] Attached SCSI disk
>[    1.368987] Freeing unused kernel memory: 22728K (ffffffff81b52000 - ffffffff83184000)
>[    1.408520] dracut: dracut-018-35.git20120510.fc17
>[    1.440542] udevd[1414]: starting version 182
>[    1.458209] [drm] Initialized drm 1.1.0 20060810
>[    1.460920] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
>[    1.463401] ACPI: Lid Switch [LID0]
>[    1.465402] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
>[    1.467727] ACPI: Power Button [PWRB]
>[    1.470478] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
>[    1.474459] ACPI: Sleep Button [SLPB]
>[    1.474685] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
>[    1.475696] ACPI: Power Button [PWRF]
>[    1.479716] [drm:i915_dump_device_info] i915 device info: gen=8, pciid=0x1616 flags=is_mobile,need_gfx_hws,has_fbc,has_hotplug,has_llc,has_ddi,
>[    1.479716] [drm:intel_detect_pch] This is Broadwell, assuming LynxPoint LP PCH
>[    1.480533] [drm] Memory usable by graphics device = 4096M
>[    1.480535] [drm:i915_gem_gtt_init] GMADR size = 256M
>[    1.480536] [drm:i915_gem_gtt_init] GTT stolen size = 32M
>[    1.480539] checking generic (b0000000 7e9000) vs hw (b0000000 10000000)
>[    1.480540] fb: conflicting fb hw usage inteldrmfb vs EFI VGA - removing generic driver
>[    1.491746] Console: switching to colour dummy device 80x25
>[    1.506566] [drm:intel_opregion_setup] graphic opregion physical addr: 0xab77b018
>[    1.506576] [drm:intel_opregion_setup] Public ACPI methods supported
>[    1.506578] [drm:intel_opregion_setup] SWSCI supported
>[    1.512075] [drm:swsci_setup] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00700483
>[    1.512077] [drm:intel_opregion_setup] ASLE supported
>[    1.512120] i915 0000:00:02.0: irq 59 for MSI/MSI-X
>[    1.512130] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
>[    1.512134] [drm] Driver supports precise vblank timestamp query.
>[    1.512137] [drm:init_vbt_defaults] Set default to SSC at 120000 kHz
>[    1.512140] [drm:validate_vbt] Using VBT from OpRegion: $VBT HASWELL        d
>[    1.512143] [drm:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0
>[    1.512144] [drm:parse_general_definitions] crt_ddc_bus_pin: 2
>[    1.512147] [drm:parse_lfp_panel_data] DRRS supported mode is static
>[    1.512149] [drm:parse_lfp_panel_data] Found panel mode in BIOS VBT tables:
>[    1.512153] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 0 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x8 0xa
>[    1.512155] [drm:parse_lfp_panel_data] VBT initial LVDS value 30033c
>[    1.512157] [drm:parse_lfp_backlight] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255
>[    1.512160] [drm:parse_sdvo_panel_data] Found SDVO panel mode in BIOS VBT tables:
>[    1.512162] [drm:drm_mode_debug_printmodeline] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
>[    1.512164] [drm:parse_sdvo_device_mapping] No SDVO device info is found in VBT
>[    1.512166] [drm:parse_driver_features] DRRS State Enabled:1
>[    1.512168] [drm:parse_mipi] No MIPI config BDB found
>[    1.512171] [drm:parse_ddi_port] Port A VBT info: DP:1 HDMI:0 DVI:0 EDP:1 CRT:0
>[    1.512173] [drm:parse_ddi_port] VBT HDMI level shift for port A: 0
>[    1.512175] [drm:parse_ddi_port] Port B VBT info: DP:1 HDMI:1 DVI:1 EDP:0 CRT:0
>[    1.512176] [drm:parse_ddi_port] VBT HDMI level shift for port B: 3
>[    1.512178] [drm:parse_ddi_port] Port C VBT info: DP:0 HDMI:1 DVI:1 EDP:0 CRT:0
>[    1.512180] [drm:parse_ddi_port] VBT HDMI level shift for port C: 3
>[    1.512244] [drm:intel_dsm_pci_probe] no _DSM method for intel device
>[    1.512249] [drm:i915_gem_init_stolen] found 33554432 bytes of stolen memory at ad800000
>[    1.512252] [drm:intel_display_power_get] enabling always-on
>[    1.512253] [drm:intel_display_power_get] enabling display
>[    1.512257] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
>[    1.512318] [drm:intel_print_wm_latency] Primary WM0 latency 20 (2.0 usec)
>[    1.512320] [drm:intel_print_wm_latency] Primary WM1 latency 50 (25.0 usec)
>[    1.512321] [drm:intel_print_wm_latency] Primary WM2 latency 90 (45.0 usec)
>[    1.512323] [drm:intel_print_wm_latency] Primary WM3 latency 130 (65.0 usec)
>[    1.512325] [drm:intel_print_wm_latency] Primary WM4 latency 160 (80.0 usec)
>[    1.512327] [drm:intel_print_wm_latency] Sprite WM0 latency 20 (2.0 usec)
>[    1.512328] [drm:intel_print_wm_latency] Sprite WM1 latency 50 (25.0 usec)
>[    1.512330] [drm:intel_print_wm_latency] Sprite WM2 latency 90 (45.0 usec)
>[    1.512332] [drm:intel_print_wm_latency] Sprite WM3 latency 130 (65.0 usec)
>[    1.512333] [drm:intel_print_wm_latency] Sprite WM4 latency 160 (80.0 usec)
>[    1.512335] [drm:intel_print_wm_latency] Cursor WM0 latency 20 (2.0 usec)
>[    1.512337] [drm:intel_print_wm_latency] Cursor WM1 latency 50 (25.0 usec)
>[    1.512338] [drm:intel_print_wm_latency] Cursor WM2 latency 90 (45.0 usec)
>[    1.512340] [drm:intel_print_wm_latency] Cursor WM3 latency 130 (65.0 usec)
>[    1.512341] [drm:intel_print_wm_latency] Cursor WM4 latency 160 (80.0 usec)
>[    1.512344] [drm:intel_modeset_init] 3 display pipes available.
>[    1.512361] [drm:intel_ddi_pll_init] CDCLK running at 540000KHz
>[    1.512666] [drm:intel_dp_init_connector] Adding eDP connector on port A
>[    1.512775] [drm:intel_dp_init_panel_power_sequencer] cur t1_t3 2000 t8 0 t9 2000 t10 500 t11_t12 6000
>[    1.512778] [drm:intel_dp_init_panel_power_sequencer] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000
>[    1.512780] [drm:intel_dp_init_panel_power_sequencer] panel power up delay 200, power down delay 50, power cycle delay 600
>[    1.512782] [drm:intel_dp_init_panel_power_sequencer] backlight on delay 1, off delay 200
>[    1.512784] [drm:intel_dp_aux_init] registering DPDDC-A bus for card0-eDP-1
>[    1.512912] [drm:_edp_panel_vdd_on] Turning eDP VDD on
>[    1.512919] [drm:_edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f
>[    1.513187] [drm:intel_dp_get_dpcd] DPCD: 11 0a 02 00 00 00 00 00 00 00 00 00 00 00 00
>[    1.513353] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06
>[    1.535021] [drm:drm_edid_to_eld] ELD: no CEA Extension found
>[    1.535022] [drm] VBT doesn't support DRRS
>[    1.535091] [drm:intel_panel_setup_backlight] backlight initialized, enabled, brightness 937/937, sysfs interface registered
>[    1.535102] [drm:intel_dp_init_connector] Adding DP connector on port B
>[    1.535193] [drm:intel_dp_aux_init] registering DPDDC-B bus for card0-DP-1
>[    1.541073] [drm:intel_modeset_readout_hw_state] [CRTC:5] hw state readout: enabled
>[    1.541076] [drm:intel_modeset_readout_hw_state] [CRTC:8] hw state readout: disabled
>[    1.541078] [drm:intel_modeset_readout_hw_state] [CRTC:11] hw state readout: disabled
>[    1.541081] [drm:intel_ddi_get_crtc_pll] Pipe A connected to port A using clock 0x20000000
>[    1.541086] [drm:intel_modeset_readout_hw_state] [ENCODER:13:TMDS-13] hw state readout: enabled, pipe A
>[    1.541088] [drm:intel_modeset_readout_hw_state] [ENCODER:22:TMDS-22] hw state readout: disabled, pipe A
>[    1.541090] [drm:intel_modeset_readout_hw_state] [ENCODER:25:TMDS-25] hw state readout: disabled, pipe A
>[    1.541093] [drm:intel_modeset_readout_hw_state] [CONNECTOR:14:eDP-1] hw state readout: enabled
>[    1.541096] [drm:intel_modeset_readout_hw_state] [CONNECTOR:23:DP-1] hw state readout: disabled
>[    1.541098] [drm:intel_modeset_readout_hw_state] [CONNECTOR:24:HDMI-A-1] hw state readout: disabled
>[    1.541100] [drm:intel_modeset_readout_hw_state] [CONNECTOR:26:HDMI-A-2] hw state readout: disabled
>[    1.541103] [drm:intel_dump_pipe_config] [CRTC:5][setup_hw_state] config for pipe A
>[    1.541104] [drm:intel_dump_pipe_config] cpu_transcoder: D
>[    1.541106] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
>[    1.541108] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.541111] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64
>[    1.541112] [drm:intel_dump_pipe_config] requested mode:
>[    1.541115] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 1920 0 0 0 1080 0 0 0 0x0 0x0
>[    1.541117] [drm:intel_dump_pipe_config] adjusted mode:
>[    1.541119] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0xa
>[    1.541122] [drm:intel_dump_crtc_timings] crtc timings: 138779 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x0 flags: 0xa
>[    1.541124] [drm:intel_dump_pipe_config] port clock: 270000
>[    1.541125] [drm:intel_dump_pipe_config] pipe src size: 1920x1080
>[    1.541127] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    1.541129] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x07800438, enabled
>[    1.541131] [drm:intel_dump_pipe_config] ips: 0
>[    1.541132] [drm:intel_dump_pipe_config] double wide: 0
>[    1.541134] [drm:intel_dump_pipe_config] [CRTC:8][setup_hw_state] config for pipe B
>[    1.541136] [drm:intel_dump_pipe_config] cpu_transcoder: B
>[    1.541137] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
>[    1.541139] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.541141] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.541143] [drm:intel_dump_pipe_config] requested mode:
>[    1.541145] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    1.541146] [drm:intel_dump_pipe_config] adjusted mode:
>[    1.541149] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    1.541151] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[    1.541153] [drm:intel_dump_pipe_config] port clock: 0
>[    1.541154] [drm:intel_dump_pipe_config] pipe src size: 0x0
>[    1.541156] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    1.541158] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    1.541159] [drm:intel_dump_pipe_config] ips: 0
>[    1.541160] [drm:intel_dump_pipe_config] double wide: 0
>[    1.541162] [drm:intel_dump_pipe_config] [CRTC:11][setup_hw_state] config for pipe C
>[    1.541164] [drm:intel_dump_pipe_config] cpu_transcoder: C
>[    1.541165] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
>[    1.541167] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.541169] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.541170] [drm:intel_dump_pipe_config] requested mode:
>[    1.541173] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    1.541174] [drm:intel_dump_pipe_config] adjusted mode:
>[    1.541176] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    1.541179] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[    1.541180] [drm:intel_dump_pipe_config] port clock: 0
>[    1.541182] [drm:intel_dump_pipe_config] pipe src size: 0x0
>[    1.541183] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    1.541185] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    1.541186] [drm:intel_dump_pipe_config] ips: 0
>[    1.541188] [drm:intel_dump_pipe_config] double wide: 0
>[    1.541195] [drm:intel_connector_check_state] [CONNECTOR:14:eDP-1]
>[    1.541198] [drm:check_encoder_state] [ENCODER:13:TMDS-13]
>[    1.541200] [drm:check_encoder_state] [ENCODER:22:TMDS-22]
>[    1.541202] [drm:check_encoder_state] [ENCODER:25:TMDS-25]
>[    1.541204] [drm:check_crtc_state] [CRTC:5]
>[    1.541211] [drm:check_crtc_state] [CRTC:8]
>[    1.541213] [drm:check_crtc_state] [CRTC:11]
>[    1.541219] [drm:ironlake_get_plane_config] pipe/plane 0/0 with fb: size=1920x1080@32, offset=0, pitch 7680, size 0x7e9000
>[    1.541222] [drm:i915_gem_object_create_stolen_for_preallocated] creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=7e9000
>[    1.541224] [drm:i915_pages_create_for_stolen] offset=0x0, size=8294400
>[    1.541228] [drm:intel_alloc_plane_obj] plane fb obj ffff880145aa8000
>[    1.541231] [drm:i915_gem_setup_global_gtt] reserving preallocated space: 0 + 7e9000
>[    1.541233] [drm:i915_gem_setup_global_gtt] clearing unused GTT space: [7e9000, fffff000]
>[    1.544383] [drm:gen8_ppgtt_init] Allocated 4 pages for page directories (0 wasted)
>[    1.544385] [drm:gen8_ppgtt_init] Allocated 2048 pages for page tables (0 wasted)
>[    1.544388] [drm:i915_gem_context_init] HW context support initialized
>[    1.544405] [drm:init_status_page] render ring hws offset: 0x007fb000
>[    1.544485] [drm:init_pipe_control] render ring pipe control offset: 0x0081c000
>[    1.544491] [drm:init_status_page] bsd ring hws offset: 0x0081d000
>[    1.544555] [drm:init_status_page] blitter ring hws offset: 0x0083e000
>[    1.544616] [drm:init_status_page] video enhancement ring hws offset: 0x0085f000
>[    1.544805] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:14:eDP-1]
>[    1.544808] [drm:intel_dp_detect] [CONNECTOR:14:eDP-1]
>[    1.544818] [drm:drm_edid_to_eld] ELD: no CEA Extension found
>[    1.544823] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:14:eDP-1] probed modes :
>[    1.544826] [drm:drm_mode_debug_printmodeline] Modeline 15:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa
>[    1.544829] [drm:drm_mode_debug_printmodeline] Modeline 16:"1920x1080" 40 92520 1920 1966 1996 2080 1080 1082 1086 1112 0x40 0xa
>[    1.544831] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:23:DP-1]
>[    1.544833] [drm:intel_dp_detect] [CONNECTOR:23:DP-1]
>[    1.544837] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:23:DP-1] disconnected
>[    1.544839] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:24:HDMI-A-1]
>[    1.544841] [drm:intel_hdmi_detect] [CONNECTOR:24:HDMI-A-1]
>[    1.544997] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
>[    1.544999] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
>[    1.545002] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:24:HDMI-A-1] disconnected
>[    1.545003] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:26:HDMI-A-2]
>[    1.545005] [drm:intel_hdmi_detect] [CONNECTOR:26:HDMI-A-2]
>[    1.545158] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[    1.545160] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[    1.545162] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:26:HDMI-A-2] disconnected
>[    1.545163] [drm:drm_setup_crtcs] 
>[    1.545165] [drm:drm_enable_connectors] connector 14 enabled? yes
>[    1.545167] [drm:drm_enable_connectors] connector 23 enabled? no
>[    1.545168] [drm:drm_enable_connectors] connector 24 enabled? no
>[    1.545169] [drm:drm_enable_connectors] connector 26 enabled? no
>[    1.545172] [drm:intel_fb_initial_config] looking for cmdline mode on connector 14
>[    1.545173] [drm:intel_fb_initial_config] looking for preferred mode on connector 14
>[    1.545176] [drm:intel_fb_initial_config] connector eDP-1 on crtc 5: 1920x1080
>[    1.545177] [drm:intel_fb_initial_config] connector 23 not enabled, skipping
>[    1.545178] [drm:intel_fb_initial_config] connector 24 not enabled, skipping
>[    1.545180] [drm:intel_fb_initial_config] connector 26 not enabled, skipping
>[    1.545182] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 5
>[    1.545184] [drm:intelfb_create] no BIOS fb, allocating a new one
>[    1.545186] [drm:i915_gem_object_create_stolen] creating stolen object: size=7e9000
>[    1.545189] [drm:i915_pages_create_for_stolen] offset=0x7e9000, size=8294400
>[    1.546532] [drm:intelfb_create] allocated 1920x1080 fb: 0x00880000, bo ffff880145aa9080
>[    1.546648] fbcon: inteldrmfb (fb0) is primary device
>[    1.546723] [drm:intel_crtc_cursor_set] cursor off
>[    1.546726] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0)
>[    1.546728] [drm:intel_set_config_compute_mode_changes] modes are different, full mode set
>[    1.546731] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    1.546735] [drm:drm_mode_debug_printmodeline] Modeline 28:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa
>[    1.546736] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=1, fb_changed=1
>[    1.546739] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    1.546742] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
>[    1.546745] [drm:connected_sink_compute_bpp] [CONNECTOR:14:eDP-1] checking for sink bpp constrains
>[    1.546748] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 0a pixel clock 138780KHz
>[    1.546756] [drm:intel_dp_compute_config] DP link bw 0a lane count 2 clock 270000 bpp 24
>[    1.546757] [drm:intel_dp_compute_config] DP link bw required 333072 available 432000
>[    1.546761] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0
>[    1.546762] [drm:intel_dump_pipe_config] [CRTC:5][modeset] config for pipe A
>[    1.546764] [drm:intel_dump_pipe_config] cpu_transcoder: D
>[    1.546765] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
>[    1.546767] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.546769] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64
>[    1.546770] [drm:intel_dump_pipe_config] requested mode:
>[    1.546772] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa
>[    1.546773] [drm:intel_dump_pipe_config] adjusted mode:
>[    1.546775] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa
>[    1.546777] [drm:intel_dump_crtc_timings] crtc timings: 138780 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x48 flags: 0xa
>[    1.546778] [drm:intel_dump_pipe_config] port clock: 270000
>[    1.546779] [drm:intel_dump_pipe_config] pipe src size: 1920x1080
>[    1.546780] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    1.546781] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    1.546782] [drm:intel_dump_pipe_config] ips: 1
>[    1.546782] [drm:intel_dump_pipe_config] double wide: 0
>[    1.556039] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0
>[    1.556044] [drm:intel_edp_backlight_off] 
>[    1.574211] [drm:intel_edp_panel_off] Turn eDP power off
>[    1.644044] usb 1-1: new low-speed USB device number 2 using xhci_hcd
>[    1.756988] [drm:wait_panel_off] Wait for panel power off time
>[    1.756992] [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control abcd0000
>[    1.811429] usb 1-1: New USB device found, idVendor=046d, idProduct=c077
>[    1.811431] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    1.811432] usb 1-1: Product: USB Optical Mouse
>[    1.811434] usb 1-1: Manufacturer: Logitech
>[    1.811592] usb 1-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
>[    1.811951] [drm:wait_panel_status] Wait complete
>[    1.811956] [drm:intel_update_fbc] no output, disabling
>[    1.811962] [drm:intel_display_power_put] disabling display
>[    1.811963] [drm:hsw_set_power_well] Requesting to disable the power well
>[    1.811979] [drm:ironlake_update_primary_plane] Writing base 00880000 00000000 0 0 7680
>[    1.812017] [drm:intel_crtc_mode_set] [ENCODER:13:TMDS-13] set [MODE:0:1920x1080]
>[    1.812018] [drm:intel_ddi_mode_set] Preparing DDI mode on port A, pipe A
>[    1.812020] [drm:intel_edp_panel_on] Turn eDP power on
>[    1.812023] [drm:wait_panel_power_cycle] Wait for panel power cycle
>[    1.813369] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:046D:C077.0001/input/input5
>[    1.813564] hid-generic 0003:046D:C077.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-1/input0
>[    1.937927] tsc: Refined TSC clocksource calibration: 1795.845 MHz
>[    1.965924] usb 1-2: new high-speed USB device number 3 using xhci_hcd
>[    2.150969] usb 1-2: New USB device found, idVendor=0b95, idProduct=7720
>[    2.150971] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[    2.150972] usb 1-2: Product: AX88772 
>[    2.150973] usb 1-2: SerialNumber: 00CC2C
>[    2.357772] [drm:wait_panel_status] mask b800000f value 00000000 status 08000001 control abcd0000
>[    2.412749] [drm:wait_panel_status] Wait complete
>[    2.412752] [drm:wait_panel_on] Wait for panel power on
>[    2.412755] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd0003
>[    2.454326] asix 1-2:1.0 eth1: register 'asix' at usb-0000:00:14.0-2, ASIX AX88772 USB 2.0 Ethernet, 00:10:60:31:90:99
>[    2.606694] usb 1-6: new low-speed USB device number 4 using xhci_hcd
>[    2.621675] [drm:wait_panel_status] Wait complete
>[    2.621679] [drm:_edp_panel_vdd_on] Turning eDP VDD on
>[    2.621685] [drm:_edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b
>[    2.622760] [drm:intel_dp_set_signal_levels] Using signal levels 00000000
>[    2.623219] [drm:intel_dp_start_link_train] clock recovery OK
>[    2.623977] [drm:intel_dp_complete_link_train] Channel EQ done. DP Training successful
>[    2.624182] [drm:intel_edp_backlight_on] 
>[    2.624186] [drm:intel_panel_enable_backlight] pipe A
>[    2.624190] [drm:intel_panel_actually_set_backlight] set backlight PWM = 937
>[    2.624192] [drm:intel_edp_psr_match_conditions] PSR disable by flag
>[    2.643665] [drm:intel_update_fbc] framebuffer not tiled or fenced, disabling compression
>[    2.643669] [drm:intel_connector_check_state] [CONNECTOR:14:eDP-1]
>[    2.643672] [drm:check_encoder_state] [ENCODER:13:TMDS-13]
>[    2.643674] [drm:check_encoder_state] [ENCODER:22:TMDS-22]
>[    2.643675] [drm:check_encoder_state] [ENCODER:25:TMDS-25]
>[    2.643676] [drm:check_crtc_state] [CRTC:5]
>[    2.643682] [drm:check_crtc_state] [CRTC:8]
>[    2.643684] [drm:check_crtc_state] [CRTC:11]
>[    2.643687] [drm:intel_crtc_cursor_set] cursor off
>[    2.643688] [drm:intel_crtc_set_config] [CRTC:8] [NOFB]
>[    2.643690] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[    2.643691] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    2.643693] [drm:intel_crtc_cursor_set] cursor off
>[    2.643693] [drm:intel_crtc_set_config] [CRTC:11] [NOFB]
>[    2.643695] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0
>[    2.643696] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    2.643700] Console: switching to colour frame buffer device 240x67
>[    2.643707] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0)
>[    2.643709] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[    2.643710] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    2.651093] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
>[    2.651127] i915 0000:00:02.0: registered panic notifier
>[    2.658153] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
>[    2.658822] acpi device:17: registered as cooling_device9
>[    2.658996] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input6
>[    2.659351] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
>[    2.663489] dracut: Starting plymouth daemon
>[    2.671627] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0)
>[    2.671639] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[    2.671642] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    2.681678] [drm:i915_gem_open] 
>[    2.681706] [drm:intel_crtc_cursor_set] cursor off
>[    2.681709] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0)
>[    2.681713] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[    2.681716] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    2.681718] [drm:intel_crtc_cursor_set] cursor off
>[    2.681720] [drm:intel_crtc_set_config] [CRTC:8] [NOFB]
>[    2.681722] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[    2.681724] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    2.681726] [drm:intel_crtc_cursor_set] cursor off
>[    2.681727] [drm:intel_crtc_set_config] [CRTC:11] [NOFB]
>[    2.681729] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0
>[    2.681731] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    2.681741] [drm:i915_gem_open] 
>[    2.681751] [drm:intel_crtc_cursor_set] cursor off
>[    2.681753] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0)
>[    2.681755] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[    2.681757] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    2.681759] [drm:intel_crtc_cursor_set] cursor off
>[    2.681760] [drm:intel_crtc_set_config] [CRTC:8] [NOFB]
>[    2.681762] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[    2.681764] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    2.681765] [drm:intel_crtc_cursor_set] cursor off
>[    2.681767] [drm:intel_crtc_set_config] [CRTC:11] [NOFB]
>[    2.681769] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0
>[    2.681770] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    2.681776] [drm:i915_gem_open] 
>[    2.682022] [drm:intel_crtc_cursor_set] cursor off
>[    2.682026] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0)
>[    2.682030] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[    2.682033] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    2.682036] [drm:intel_crtc_cursor_set] cursor off
>[    2.682038] [drm:intel_crtc_set_config] [CRTC:8] [NOFB]
>[    2.682041] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[    2.682044] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    2.682046] [drm:intel_crtc_cursor_set] cursor off
>[    2.682049] [drm:intel_crtc_set_config] [CRTC:11] [NOFB]
>[    2.682051] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0
>[    2.682054] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    2.682254] dracut: error: unexpectedly disconnected from boot status daemon
>[    2.688308] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0)
>[    2.688311] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[    2.688313] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    2.750907] ACPI: AC Adapter [ADP1] (on-line)
>[    2.768069] ppdev: user-space parallel port driver
>[    2.772072] ACPI: Battery Slot [BAT0] (battery present)
>[    2.772179] ACPI: Battery Slot [BAT1] (battery absent)
>[    2.772293] ACPI: Battery Slot [BAT2] (battery absent)
>[    2.775628] usb 1-6: New USB device found, idVendor=413c, idProduct=2107
>[    2.775689] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    2.775729] usb 1-6: Product: Dell USB Entry Keyboard
>[    2.775758] usb 1-6: Manufacturer: DELL
>[    2.776235] usb 1-6: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
>[    2.779948] input: DELL Dell USB Entry Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:413C:2107.0002/input/input7
>[    2.780307] hid-generic 0003:413C:2107.0002: input,hidraw1: USB HID v1.11 Keyboard [DELL Dell USB Entry Keyboard] on usb-0000:00:14.0-6/input0
>[    2.792071] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182f conflicts with OpRegion 0x0000000000001800-0x000000000000187f (\PMIO) (20131218/utaddress-258)
>[    2.792237] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[    2.792336] ACPI Warning: SystemIO range 0x0000000000000830-0x000000000000083f conflicts with OpRegion 0x0000000000000800-0x000000000000083f (\GPRL) (20131218/utaddress-258)
>[    2.792491] ACPI Warning: SystemIO range 0x0000000000000830-0x000000000000083f conflicts with OpRegion 0x0000000000000800-0x0000000000000bff (\GPR_) (20131218/utaddress-258)
>[    2.795858] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[    2.798794] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082f conflicts with OpRegion 0x0000000000000800-0x000000000000083f (\GPRL) (20131218/utaddress-258)
>[    2.802671] input: PC Speaker as /devices/platform/pcspkr/input/input8
>[    2.802856] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082f conflicts with OpRegion 0x0000000000000800-0x0000000000000bff (\GPR_) (20131218/utaddress-258)
>[    2.802862] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082f conflicts with OpRegion 0x0000000000000810-0x0000000000000813 (\_PR_.IO_D) (20131218/utaddress-258)
>[    2.802864] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[    2.802865] lpc_ich: Resource conflict(s) found affecting gpio_ich
>[    2.802893] i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003)
>[    2.803020] ACPI Warning: SystemIO range 0x000000000000efa0-0x000000000000efbf conflicts with OpRegion 0x000000000000efa0-0x000000000000efaf (\_SB_.PCI0.SBUS.SMBI) (20131218/utaddress-258)
>[    2.803021] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[    2.807730] snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002)
>[    2.807862] ALSA sound/pci/hda/hda_i915.c:58 HDA driver get symbol successfully from i915 module
>[    2.807866] [drm:intel_display_power_get] enabling display
>[    2.807868] [drm:hsw_set_power_well] Enabling power well
>[    2.809227] iTCO_vendor_support: vendor-support=0
>[    2.809682] snd_hda_intel 0000:00:03.0: irq 60 for MSI/MSI-X
>[    2.809732] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
>[    2.809760] iTCO_wdt: Found a Wildcat Point_LP TCO device (Version=2, TCOBASE=0x1860)
>[    2.810571] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>[    2.855495] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0)
>[    2.855498] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[    2.855500] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    2.865080] EXT4-fs (sda2): INFO: recovery required on readonly filesystem
>[    2.867429] EXT4-fs (sda2): write access will be enabled during recovery
>[    2.883381] EXT4-fs (sda2): recovery complete
>[    2.885859] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
>[    2.909539] dracut: Checking ext4: /dev/sda2
>[    2.912011] dracut: issuing e2fsck -a  /dev/sda2
>[    2.923559] dracut: /dev/sda2: clean, 757324/13598720 files, 22261280/54372608 blocks
>[    2.926359] dracut: Remounting /dev/sda2 with -o errors=remount-ro,ro
>[    2.937605] Switched to clocksource tsc
>[    2.941963] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: errors=remount-ro
>[    2.947847] dracut: Mounted root filesystem /dev/sda2
>[    2.961289] device-mapper: uevent: version 1.0.3
>[    2.963838] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
>[    2.986759] dracut: Switching root
>[    3.019756] random: init urandom read with 87 bits of entropy available
>[    3.054080] init: ureadahead main process (2716) terminated with status 5
>[    3.153796] systemd-udevd[2826]: starting version 204
>[    3.209635] random: nonblocking pool is initialized
>[    3.244387] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0)
>[    3.244391] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[    3.244394] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    3.333646] systemd-udevd[3267]: could not open moddep file '/lib/modules/3.14.0_drm-intel-next-queued_b7c0d9_20140428+/modules.dep.bin'
>[    3.337764] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0)
>[    3.337768] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[    3.337771] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    3.345498] init: Failed to spawn ufw pre-start process: unable to execute: No such file or directory
>[    3.355426] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0)
>[    3.355430] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[    3.355434] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    3.365451] init: Failed to spawn ufw post-stop process: unable to execute: No such file or directory
>[    3.401001] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0)
>[    3.401004] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[    3.401007] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    3.410749] Adding 16440316k swap on /dev/sda3.  Priority:-1 extents:1 across:16440316k SS
>[    3.423047] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
>[    3.439092] init: Failed to spawn ufw pre-start process: unable to execute: No such file or directory
>[    3.441610] init: Failed to spawn ufw post-stop process: unable to execute: No such file or directory
>[    3.460748] init: Failed to spawn ufw pre-start process: unable to execute: No such file or directory
>[    3.463530] init: Failed to spawn ufw post-stop process: unable to execute: No such file or directory
>[    3.520745] init: Failed to spawn ufw pre-start process: unable to execute: No such file or directory
>[    3.525012] init: Failed to spawn ufw post-stop process: unable to execute: No such file or directory
>[    3.616082] init: failsafe main process (3696) killed by TERM signal
>[    3.651963] init: Failed to spawn bluetooth main process: unable to execute: No such file or directory
>[    3.662185] init: Failed to spawn ufw pre-start process: unable to execute: No such file or directory
>[    3.668509] init: Failed to spawn ufw post-stop process: unable to execute: No such file or directory
>[    3.840917] init: Failed to spawn hybrid-gfx main process: unable to execute: No such file or directory
>[    4.117249] init: avahi-cups-reload main process (4055) terminated with status 1
>[    4.144040] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0)
>[    4.144045] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[    4.144048] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    4.162509] init: lightdm main process (3993) terminated with status 1
>[    4.170333] init: plymouth-ready (started) main process (3575) terminated with status 1
>[    4.512995] [drm:edp_panel_vdd_off_sync] Turning eDP VDD off
>[    4.513005] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007
>[    4.868664] e1000e 0000:00:19.0: irq 57 for MSI/MSI-X
>[    4.968853] e1000e 0000:00:19.0: irq 57 for MSI/MSI-X
>[    6.610244] asix 1-2:1.0 eth2: link up, 100Mbps, full-duplex, lpa 0x45E1
>[    8.983726] init: failsafe-x main process (4248) terminated with status 127
>[   63.878003] usb 1-1: USB disconnect, device number 2
>[   65.396087] usb 1-1: new low-speed USB device number 5 using xhci_hcd
>[   65.563523] usb 1-1: New USB device found, idVendor=046d, idProduct=c077
>[   65.563526] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[   65.563528] usb 1-1: Product: USB Optical Mouse
>[   65.563530] usb 1-1: Manufacturer: Logitech
>[   65.563649] usb 1-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
>[   65.565709] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:046D:C077.0003/input/input9
>[   65.565882] hid-generic 0003:046D:C077.0003: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-1/input0
>[  125.559734] usb 1-1: USB disconnect, device number 5
>[  127.076889] usb 1-1: new low-speed USB device number 6 using xhci_hcd
>[  127.244258] usb 1-1: New USB device found, idVendor=046d, idProduct=c077
>[  127.244261] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[  127.244263] usb 1-1: Product: USB Optical Mouse
>[  127.244265] usb 1-1: Manufacturer: Logitech
>[  127.244383] usb 1-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
>[  127.246151] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:046D:C077.0004/input/input10
>[  127.246346] hid-generic 0003:046D:C077.0004: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-1/input0
>[  187.241468] usb 1-1: USB disconnect, device number 6
>[  188.763688] usb 1-1: new low-speed USB device number 7 using xhci_hcd
>[  188.931099] usb 1-1: New USB device found, idVendor=046d, idProduct=c077
>[  188.931102] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[  188.931105] usb 1-1: Product: USB Optical Mouse
>[  188.931107] usb 1-1: Manufacturer: Logitech
>[  188.931224] usb 1-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
>[  188.933092] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:046D:C077.0005/input/input11
>[  188.933283] hid-generic 0003:046D:C077.0005: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-1/input0
>[  248.931199] usb 1-1: USB disconnect, device number 7
>[  250.448488] usb 1-1: new low-speed USB device number 8 using xhci_hcd
>[  250.615832] usb 1-1: New USB device found, idVendor=046d, idProduct=c077
>[  250.615835] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[  250.615838] usb 1-1: Product: USB Optical Mouse
>[  250.615840] usb 1-1: Manufacturer: Logitech
>[  250.615956] usb 1-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
>[  250.617819] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:046D:C077.0006/input/input12
>[  250.618000] hid-generic 0003:046D:C077.0006: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-1/input0
>[  310.604935] usb 1-1: USB disconnect, device number 8
>[  312.122293] usb 1-1: new low-speed USB device number 9 using xhci_hcd
>[  312.289568] usb 1-1: New USB device found, idVendor=046d, idProduct=c077
>[  312.289571] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[  312.289573] usb 1-1: Product: USB Optical Mouse
>[  312.289575] usb 1-1: Manufacturer: Logitech
>[  312.289694] usb 1-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
>[  312.291536] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:046D:C077.0007/input/input13
>[  312.291735] hid-generic 0003:046D:C077.0007: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-1/input0
>[  343.979146] [drm:i915_gem_open] 
>[  343.979181] [drm:intel_crtc_cursor_set] cursor off
>[  343.979185] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0)
>[  343.979189] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[  343.979192] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[  343.979194] [drm:intel_crtc_cursor_set] cursor off
>[  343.979196] [drm:intel_crtc_set_config] [CRTC:8] [NOFB]
>[  343.979198] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[  343.979201] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[  343.979202] [drm:intel_crtc_cursor_set] cursor off
>[  343.979204] [drm:intel_crtc_set_config] [CRTC:11] [NOFB]
>[  343.979206] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0
>[  343.979208] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[  343.979221] [drm:i915_gem_open] 
>[  343.979231] [drm:intel_crtc_cursor_set] cursor off
>[  343.979233] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0)
>[  343.979235] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[  343.979237] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[  343.979239] [drm:intel_crtc_cursor_set] cursor off
>[  343.979240] [drm:intel_crtc_set_config] [CRTC:8] [NOFB]
>[  343.979242] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[  343.979244] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[  343.979245] [drm:intel_crtc_cursor_set] cursor off
>[  343.979247] [drm:intel_crtc_set_config] [CRTC:11] [NOFB]
>[  343.979249] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0
>[  343.979251] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[  343.979256] [drm:i915_gem_open] 
>[  343.979537] [drm:i915_gem_open] 
>[  343.979554] [drm:i915_gem_open] 
>[  351.977349] [drm:intel_crtc_cursor_set] cursor off
>[  351.977354] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0)
>[  351.977358] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[  351.977361] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[  351.977363] [drm:intel_crtc_cursor_set] cursor off
>[  351.977365] [drm:intel_crtc_set_config] [CRTC:8] [NOFB]
>[  351.977367] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[  351.977369] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[  351.977371] [drm:intel_crtc_cursor_set] cursor off
>[  351.977372] [drm:intel_crtc_set_config] [CRTC:11] [NOFB]
>[  351.977375] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0
>[  351.977377] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[  372.286669] usb 1-1: USB disconnect, device number 9
>[  373.809094] usb 1-1: new low-speed USB device number 10 using xhci_hcd
>[  373.976300] usb 1-1: New USB device found, idVendor=046d, idProduct=c077
>[  373.976302] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[  373.976305] usb 1-1: Product: USB Optical Mouse
>[  373.976307] usb 1-1: Manufacturer: Logitech
>[  373.976425] usb 1-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
>[  373.978347] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:046D:C077.0008/input/input14
>[  373.978570] hid-generic 0003:046D:C077.0008: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-1/input0

Actions: View

Attachments on bug 78028: 98116

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.