Attachment 98410 Details for Bug 78248 – dmesg

dmesg

gem_render_copy.dmesg (text/plain), 90.18 KB, created by Guo Jinxian on 2014-05-04 09:14:31 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Guo Jinxian

Created: 2014-05-04 09:14:31 UTC

Size: 90.18 KB

patch

obsolete

>[    0.000000] Initializing cgroup subsys cpuset
>[    0.000000] Initializing cgroup subsys cpu
>[    0.000000] Initializing cgroup subsys cpuacct
>[    0.000000] Linux version 3.14.0_drm-intel-next-queued_e5c03c_20140504+ (buildtopcommit@x-kernel) (gcc version 4.7.0 20120507 (Red Hat 4.7.0-5) (GCC) ) #2290 SMP Sun May 4 11:41:39 CST 2014
>[    0.000000] Command line: BOOT_IMAGE=kernels//nightly_parents/2014_05_04/drm-intel-next-queued/e5c03ca362819ba8ffbe5674340b61b9cd75de8f/bzImage_x86_64 root=/dev/sda4 drm.debug=0xe modules_path=kernels//nightly_parents/2014_05_04/drm-intel-next-queued/e5c03ca362819ba8ffbe5674340b61b9cd75de8f/modules_x86_64/lib/modules/3.14.0_drm-intel-next-queued_e5c03c_20140504+ acpi_rsdp=0xab8e1014
>[    0.000000] e820: BIOS-provided physical RAM map:
>[    0.000000] BIOS-e820: [mem 0x0000000000000100-0x0000000000057fff] usable
>[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable
>[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000a7eeefff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000a7eef000-0x00000000a7eeffff] ACPI data
>[    0.000000] BIOS-e820: [mem 0x00000000a7ef0000-0x00000000a7ef0fff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000a7ef1000-0x00000000a7ef7fff] ACPI data
>[    0.000000] BIOS-e820: [mem 0x00000000a7ef8000-0x00000000a7f05fff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000a7f06000-0x00000000a7f06fff] ACPI data
>[    0.000000] BIOS-e820: [mem 0x00000000a7f07000-0x00000000a7f09fff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000a7f0a000-0x00000000a7f0afff] ACPI data
>[    0.000000] BIOS-e820: [mem 0x00000000a7f0b000-0x00000000a800dfff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000a800e000-0x00000000a800efff] ACPI data
>[    0.000000] BIOS-e820: [mem 0x00000000a800f000-0x00000000a8030fff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000a8031000-0x00000000a8031fff] ACPI data
>[    0.000000] BIOS-e820: [mem 0x00000000a8032000-0x00000000a8099fff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000a809a000-0x00000000a809afff] ACPI data
>[    0.000000] BIOS-e820: [mem 0x00000000a809b000-0x00000000a809ffff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000a80a0000-0x00000000a80a0fff] ACPI data
>[    0.000000] BIOS-e820: [mem 0x00000000a80a1000-0x00000000a825efff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000a825f000-0x00000000a8262fff] ACPI data
>[    0.000000] BIOS-e820: [mem 0x00000000a8263000-0x00000000a8367fff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000a8368000-0x00000000a836afff] ACPI data
>[    0.000000] BIOS-e820: [mem 0x00000000a836b000-0x00000000ab04dfff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000ab04e000-0x00000000ab6b5fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000ab6b6000-0x00000000ab8b5fff] ACPI NVS
>[    0.000000] BIOS-e820: [mem 0x00000000ab8b6000-0x00000000ab8e1fff] ACPI data
>[    0.000000] BIOS-e820: [mem 0x00000000ab8e2000-0x00000000ab8fefff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000014f7fffff] usable
>[    0.000000] NX (Execute Disable) protection: active
>[    0.000000] DMI not present or invalid.
>[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
>[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
>[    0.000000] No AGP bridge found
>[    0.000000] e820: last_pfn = 0x14f800 max_arch_pfn = 0x400000000
>[    0.000000] MTRR default type: write-back
>[    0.000000] MTRR fixed ranges enabled:
>[    0.000000]   00000-9FFFF write-back
>[    0.000000]   A0000-BFFFF uncachable
>[    0.000000]   C0000-FFFFF write-protect
>[    0.000000] MTRR variable ranges enabled:
>[    0.000000]   0 base 00C0000000 mask 7FC0000000 uncachable
>[    0.000000]   1 base 00B0000000 mask 7FF0000000 uncachable
>[    0.000000]   2 base 00AE000000 mask 7FFE000000 uncachable
>[    0.000000]   3 base 00AD000000 mask 7FFF000000 uncachable
>[    0.000000]   4 disabled
>[    0.000000]   5 disabled
>[    0.000000]   6 disabled
>[    0.000000]   7 disabled
>[    0.000000]   8 disabled
>[    0.000000]   9 disabled
>[    0.000000] x86 PAT enabled: cpu 0, old 0x7010600070106, new 0x7010600070106
>[    0.000000] e820: last_pfn = 0xab8ff max_arch_pfn = 0x400000000
>[    0.000000] Base memory trampoline at [ffff880000094000] 94000 size 24576
>[    0.000000] Using GB pages for direct mapping
>[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
>[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
>[    0.000000] BRK [0x03222000, 0x03222fff] PGTABLE
>[    0.000000] BRK [0x03223000, 0x03223fff] PGTABLE
>[    0.000000] BRK [0x03224000, 0x03224fff] PGTABLE
>[    0.000000] init_memory_mapping: [mem 0x14f600000-0x14f7fffff]
>[    0.000000]  [mem 0x14f600000-0x14f7fffff] page 2M
>[    0.000000] BRK [0x03225000, 0x03225fff] PGTABLE
>[    0.000000] init_memory_mapping: [mem 0x14c000000-0x14f5fffff]
>[    0.000000]  [mem 0x14c000000-0x14f5fffff] page 2M
>[    0.000000] init_memory_mapping: [mem 0x100000000-0x14bffffff]
>[    0.000000]  [mem 0x100000000-0x13fffffff] page 1G
>[    0.000000]  [mem 0x140000000-0x14bffffff] page 2M
>[    0.000000] init_memory_mapping: [mem 0x00100000-0xa7eeefff]
>[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
>[    0.000000]  [mem 0x00200000-0x3fffffff] page 2M
>[    0.000000]  [mem 0x40000000-0x7fffffff] page 1G
>[    0.000000]  [mem 0x80000000-0xa7dfffff] page 2M
>[    0.000000]  [mem 0xa7e00000-0xa7eeefff] page 4k
>[    0.000000] init_memory_mapping: [mem 0xa7ef0000-0xa7ef0fff]
>[    0.000000]  [mem 0xa7ef0000-0xa7ef0fff] page 4k
>[    0.000000] init_memory_mapping: [mem 0xa7ef8000-0xa7f05fff]
>[    0.000000]  [mem 0xa7ef8000-0xa7f05fff] page 4k
>[    0.000000] init_memory_mapping: [mem 0xa7f07000-0xa7f09fff]
>[    0.000000]  [mem 0xa7f07000-0xa7f09fff] page 4k
>[    0.000000] init_memory_mapping: [mem 0xa7f0b000-0xa800dfff]
>[    0.000000]  [mem 0xa7f0b000-0xa800dfff] page 4k
>[    0.000000] BRK [0x03226000, 0x03226fff] PGTABLE
>[    0.000000] init_memory_mapping: [mem 0xa800f000-0xa8030fff]
>[    0.000000]  [mem 0xa800f000-0xa8030fff] page 4k
>[    0.000000] init_memory_mapping: [mem 0xa8032000-0xa8099fff]
>[    0.000000]  [mem 0xa8032000-0xa8099fff] page 4k
>[    0.000000] init_memory_mapping: [mem 0xa809b000-0xa809ffff]
>[    0.000000]  [mem 0xa809b000-0xa809ffff] page 4k
>[    0.000000] init_memory_mapping: [mem 0xa80a1000-0xa825efff]
>[    0.000000]  [mem 0xa80a1000-0xa825efff] page 4k
>[    0.000000] BRK [0x03227000, 0x03227fff] PGTABLE
>[    0.000000] init_memory_mapping: [mem 0xa8263000-0xa8367fff]
>[    0.000000]  [mem 0xa8263000-0xa8367fff] page 4k
>[    0.000000] init_memory_mapping: [mem 0xa836b000-0xab04dfff]
>[    0.000000]  [mem 0xa836b000-0xa83fffff] page 4k
>[    0.000000]  [mem 0xa8400000-0xaaffffff] page 2M
>[    0.000000]  [mem 0xab000000-0xab04dfff] page 4k
>[    0.000000] init_memory_mapping: [mem 0xab8e2000-0xab8fefff]
>[    0.000000]  [mem 0xab8e2000-0xab8fefff] page 4k
>[    0.000000] ACPI: RSDP 00000000ab8e1014 000024 (v02 INTEL )
>[    0.000000] ACPI: XSDT 00000000a7f06188 000104 (v01 INTEL   BDW-ULT 00000000      01000013)
>[    0.000000] ACPI: FACP 00000000ab8d9000 0000F4 (v05 INTEL   BDW-ULT 00000000 MSFT 0000005F)
>[    0.000000] ACPI: DSDT 00000000ab8b9000 01BDDF (v02 INTEL  BDW      00000000 INTL 20130927)
>[    0.000000] ACPI: FACS 00000000ab899000 000040
>[    0.000000] ACPI: TCPA 00000000ab8df000 000032 (v02 INTEL  EDK2     00000002      01000013)
>[    0.000000] ACPI: UEFI 00000000ab89c000 000042 (v01 INTEL  EDK2     00000002      01000013)
>[    0.000000] ACPI: SSDT 00000000ab8de000 0004A9 (v01 Intel_ Tpm2Tabl 00001000 INTL 20130927)
>[    0.000000] ACPI: SSDT 00000000ab8dd000 00004E (v01 MeSsdt  MeSsdt  00003000 INTL 20130927)
>[    0.000000] ACPI: TPM2 00000000ab8dc000 000034 (v03                 00000000      00000000)
>[    0.000000] ACPI: DBGP 00000000ab8db000 000034 (v01 INTEL           00000000 MSFT 0000005F)
>[    0.000000] ACPI: LPIT 00000000ab8da000 000094 (v01 INTEL   BDW-ULT 00000000 MSFT 0000005F)
>[    0.000000] ACPI: HPET 00000000ab8d8000 000038 (v01 INTEL   BDW-ULT 00000001 MSFT 0000005F)
>[    0.000000] ACPI: APIC 00000000ab8d7000 0000BC (v01 INTEL   BDW-ULT 00000001 MSFT 0000005F)
>[    0.000000] ACPI: MCFG 00000000ab8d6000 00003C (v01 INTEL   BDW-ULT 00000001 MSFT 0000005F)
>[    0.000000] ACPI: WDAT 00000000ab8d5000 000104 (v01 INTEL   BDW-ULT 00000000 MSFT 0000005F)
>[    0.000000] ACPI: SSDT 00000000ab8b8000 000251 (v01 INTEL  sensrhub 00000000 INTL 20130927)
>[    0.000000] ACPI: SSDT 00000000a825f000 002E26 (v01 INTEL  PtidDevc 00001000 INTL 20130927)
>[    0.000000] ACPI: SSDT 00000000ab8b7000 000BEE (v01 INTEL  Ther_Rvp 00001000 INTL 20130927)
>[    0.000000] ACPI: SSDT 00000000ab8b6000 00017F (v01 INTEL     zpodd 00001000 INTL 20130927)
>[    0.000000] ACPI: BOOT 00000000a8262000 000028 (v01  INTEL TIANO    00000002 MSFT 01000013)
>[    0.000000] ACPI: SSDT 00000000a80a0000 000454 (v01  PmRef  Cpu0Ist 00003000 INTL 20130927)
>[    0.000000] ACPI: SSDT 00000000a809a000 000B74 (v01 CpuRef  CpuSsdt 00003000 INTL 20130927)
>[    0.000000] ACPI: SSDT 00000000a7ef1000 006DA8 (v01 SaSsdt  SaSsdt  00003000 INTL 20130927)
>[    0.000000] ACPI: SSDT 00000000a7f0a000 0006A7 (v01 CppcTa CppcTabl 00001000 INTL 20130927)
>[    0.000000] ACPI: PCCT 00000000ab8e0000 00006E (v05 PcctTa PcctTabl 00001000 INTL 20130927)
>[    0.000000] ACPI: SSDT 00000000a7eef000 000AC4 (v01 Cpc_Ta Cpc_Tabl 00001000 INTL 20130927)
>[    0.000000] ACPI: CSRT 00000000a8031000 0000C4 (v01   INTL  BDW-ULT 00000001 INTL 20100528)
>[    0.000000] ACPI: DMAR 00000000a800e000 000138 (v01 INTEL      BDW  00000001 INTL 00000001)
>[    0.000000] ACPI: FPDT 00000000a836a000 000044 (v01 INTEL  EDK2     00000002      01000013)
>[    0.000000] ACPI: ASF! 00000000a8369000 0000A5 (v32 INTEL       HCG 00000001 TFSM 000F4240)
>[    0.000000] ACPI: BGRT 00000000a8368000 000038 (v01 INTEL  EDK2     00000002      01000013)
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] No NUMA configuration found
>[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000014f7fffff]
>[    0.000000] Initmem setup node 0 [mem 0x00000000-0x14f7fffff]
>[    0.000000]   NODE_DATA [mem 0x14f7f8000-0x14f7fbfff]
>[    0.000000]  [ffffea0000000000-ffffea00053fffff] PMD -> [ffff88014ae00000-ffff88014edfffff] on node 0
>[    0.000000] Zone ranges:
>[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
>[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
>[    0.000000]   Normal   [mem 0x100000000-0x14f7fffff]
>[    0.000000] Movable zone start for each node
>[    0.000000] Early memory node ranges
>[    0.000000]   node   0: [mem 0x00001000-0x00057fff]
>[    0.000000]   node   0: [mem 0x00059000-0x0009efff]
>[    0.000000]   node   0: [mem 0x00100000-0xa7eeefff]
>[    0.000000]   node   0: [mem 0xa7ef0000-0xa7ef0fff]
>[    0.000000]   node   0: [mem 0xa7ef8000-0xa7f05fff]
>[    0.000000]   node   0: [mem 0xa7f07000-0xa7f09fff]
>[    0.000000]   node   0: [mem 0xa7f0b000-0xa800dfff]
>[    0.000000]   node   0: [mem 0xa800f000-0xa8030fff]
>[    0.000000]   node   0: [mem 0xa8032000-0xa8099fff]
>[    0.000000]   node   0: [mem 0xa809b000-0xa809ffff]
>[    0.000000]   node   0: [mem 0xa80a1000-0xa825efff]
>[    0.000000]   node   0: [mem 0xa8263000-0xa8367fff]
>[    0.000000]   node   0: [mem 0xa836b000-0xab04dfff]
>[    0.000000]   node   0: [mem 0xab8e2000-0xab8fefff]
>[    0.000000]   node   0: [mem 0x100000000-0x14f7fffff]
>[    0.000000] On node 0 totalpages: 1026035
>[    0.000000]   DMA zone: 64 pages used for memmap
>[    0.000000]   DMA zone: 26 pages reserved
>[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
>[    0.000000]   DMA32 zone: 10882 pages used for memmap
>[    0.000000]   DMA32 zone: 696406 pages, LIFO batch:31
>[    0.000000]   Normal zone: 5088 pages used for memmap
>[    0.000000]   Normal zone: 325632 pages, LIFO batch:31
>[    0.000000] ACPI: PM-Timer IO Port: 0x1808
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0xff] disabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0xff] disabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0xff] disabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0xff] disabled)
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
>[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>[    0.000000] ACPI: IRQ0 used by override.
>[    0.000000] ACPI: IRQ2 used by override.
>[    0.000000] ACPI: IRQ9 used by override.
>[    0.000000] Using ACPI (MADT) for SMP configuration information
>[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
>[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
>[    0.000000] nr_irqs_gsi: 56
>[    0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
>[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xa7eef000-0xa7eeffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xa7ef1000-0xa7ef7fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xa7f06000-0xa7f06fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xa7f0a000-0xa7f0afff]
>[    0.000000] PM: Registered nosave memory: [mem 0xa800e000-0xa800efff]
>[    0.000000] PM: Registered nosave memory: [mem 0xa8031000-0xa8031fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xa809a000-0xa809afff]
>[    0.000000] PM: Registered nosave memory: [mem 0xa80a0000-0xa80a0fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xa825f000-0xa8262fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xa8368000-0xa836afff]
>[    0.000000] PM: Registered nosave memory: [mem 0xab04e000-0xab6b5fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xab6b6000-0xab8b5fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xab8b6000-0xab8e1fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xab8ff000-0xad7fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xad800000-0xaf7fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xaf800000-0xe00f7fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xe00f8000-0xe00f8fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xe00f9000-0xfed1bfff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xffffffff]
>[    0.000000] e820: [mem 0xaf800000-0xe00f7fff] available for PCI devices
>[    0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
>[    0.000000] PERCPU: Embedded 26 pages/cpu @ffff88014f400000 s74560 r8192 d23744 u262144
>[    0.000000] pcpu-alloc: s74560 r8192 d23744 u262144 alloc=1*2097152
>[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
>[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1009975
>[    0.000000] Policy zone: Normal
>[    0.000000] Kernel command line: BOOT_IMAGE=kernels//nightly_parents/2014_05_04/drm-intel-next-queued/e5c03ca362819ba8ffbe5674340b61b9cd75de8f/bzImage_x86_64 root=/dev/sda4 drm.debug=0xe modules_path=kernels//nightly_parents/2014_05_04/drm-intel-next-queued/e5c03ca362819ba8ffbe5674340b61b9cd75de8f/modules_x86_64/lib/modules/3.14.0_drm-intel-next-queued_e5c03c_20140504+ acpi_rsdp=0xab8e1014
>[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
>[    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
>[    0.000000] Checking aperture...
>[    0.000000] No AGP bridge found
>[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
>[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>[    0.000000] Memory: 3936496K/4104140K available (7316K kernel code, 706K rwdata, 3552K rodata, 22728K init, 596K bss, 167644K reserved)
>[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
>[    0.000000] Hierarchical RCU implementation.
>[    0.000000] 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
>[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
>[    0.000000] NR_IRQS:4352 nr_irqs:1016 16
>[    0.000000] Console: colour dummy device 80x25
>[    0.000000] console [tty0] enabled
>[    0.000000] hpet clockevent registered
>[    0.000000] tsc: Fast TSC calibration using PIT
>[    0.000000] tsc: Detected 1197.270 MHz processor
>[    0.000004] Calibrating delay loop (skipped), value calculated using timer frequency.. 2394.54 BogoMIPS (lpj=1197270)
>[    0.000012] pid_max: default: 32768 minimum: 301
>[    0.000025] ACPI: Core revision 20131218
>[    0.029699] ACPI: All ACPI Tables successfully acquired
>[    0.029747] Security Framework initialized
>[    0.030180] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
>[    0.031409] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
>[    0.031952] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
>[    0.031963] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
>[    0.032290] CPU: Physical Processor ID: 0
>[    0.032294] CPU: Processor Core ID: 0
>[    0.033851] mce: CPU supports 7 MCE banks
>[    0.033869] CPU0: Thermal LVT vector (0xfa) already installed
>[    0.033883] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
>Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
>tlb_flushall_shift: 6
>[    0.034522] Freeing SMP alternatives memory: 32K (ffffffff83184000 - ffffffff8318c000)
>[    0.035253] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>[    0.045257] smpboot: CPU0: Genuine Intel(R) CPU 0000 @ 1.20GHz (fam: 06, model: 3d, stepping: 03)
>[    0.045270] TSC deadline timer enabled
>[    0.045282] Performance Events: PEBS fmt2+, generic architected perfmon, full-width counters, Intel PMU driver.
>[    0.045295] ... version:                3
>[    0.045298] ... bit width:              48
>[    0.045301] ... generic registers:      4
>[    0.045304] ... value mask:             0000ffffffffffff
>[    0.045308] ... max period:             0000ffffffffffff
>[    0.045311] ... fixed-purpose events:   3
>[    0.045314] ... event mask:             000000070000000f
>[    0.045650] x86: Booting SMP configuration:
>[    0.045654] .... node  #0, CPUs:      #1
>[    0.058386] CPU1: Thermal LVT vector (0xfa) already installed
>[    0.060589]  #2
>[    0.073549] CPU2: Thermal LVT vector (0xfa) already installed
>[    0.088482]  #3
>[    0.088482] CPU3: Thermal LVT vector (0xfa) already installed
>[    0.090611] x86: Booted up 1 node, 4 CPUs
>[    0.090621] smpboot: Total of 4 processors activated (9578.16 BogoMIPS)
>[    0.097827] devtmpfs: initialized
>[    0.098322] PM: Registering ACPI NVS region [mem 0xab6b6000-0xab8b5fff] (2097152 bytes)
>[    0.098642] xor: automatically using best checksumming function:
>[    0.108462]    avx       : 12080.000 MB/sec
>[    0.108495] RTC time: 23:50:02, date: 01/13/01
>[    0.108557] NET: Registered protocol family 16
>[    0.109221] cpuidle: using governor ladder
>[    0.109225] cpuidle: using governor menu
>[    0.109385] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
>[    0.109390] ACPI: bus type PCI registered
>[    0.109505] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
>[    0.109512] PCI: not using MMCONFIG
>[    0.109515] PCI: Using configuration type 1 for base access
>[    0.127612] bio: create slab <bio-0> at 0
>[    0.144558] raid6: sse2x1    3925 MB/s
>[    0.161586] raid6: sse2x2    4683 MB/s
>[    0.178606] raid6: sse2x4    5609 MB/s
>[    0.195643] raid6: avx2x1    7652 MB/s
>[    0.212667] raid6: avx2x2    8718 MB/s
>[    0.229692] raid6: avx2x4   10152 MB/s
>[    0.229696] raid6: using algorithm avx2x4 (10152 MB/s)
>[    0.229699] raid6: using avx2x2 recovery algorithm
>[    0.229793] ACPI: Added _OSI(Module Device)
>[    0.229797] ACPI: Added _OSI(Processor Device)
>[    0.229800] ACPI: Added _OSI(3.0 _SCP Extensions)
>[    0.229804] ACPI: Added _OSI(Processor Aggregator Device)
>[    0.243413] ACPI: Executed 17 blocks of module-level executable AML code
>[    0.274961] ACPI: SSDT 00000000ab67ba18 0004AE (v01  PmRef  Cpu0Cst 00003001 INTL 20130927)
>[    0.276255] ACPI: Dynamic OEM Table Load:
>[    0.276260] ACPI: SSDT           (null) 0004AE (v01  PmRef  Cpu0Cst 00003001 INTL 20130927)
>[    0.281188] ACPI: SSDT 00000000ab67c818 000792 (v01  PmRef    ApIst 00003000 INTL 20130927)
>[    0.282587] ACPI: Dynamic OEM Table Load:
>[    0.282592] ACPI: SSDT           (null) 000792 (v01  PmRef    ApIst 00003000 INTL 20130927)
>[    0.285954] ACPI: SSDT 00000000ab67ad98 000119 (v01  PmRef    ApCst 00003000 INTL 20130927)
>[    0.287237] ACPI: Dynamic OEM Table Load:
>[    0.287242] ACPI: SSDT           (null) 000119 (v01  PmRef    ApCst 00003000 INTL 20130927)
>[    0.336051] ACPI: Interpreter enabled
>[    0.336065] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131218/hwxface-580)
>[    0.336080] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-580)
>[    0.336115] ACPI: (supports S0 S3 S4 S5)
>[    0.336119] ACPI: Using IOAPIC for interrupt routing
>[    0.336155] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
>[    0.339459] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
>[    0.376544] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>[    0.377572] ACPI: ACPI Dock Station Driver: 1 docks/bays found
>[    0.378701] ACPI: Power Resource [PG00] (on)
>[    0.383571] ACPI: Power Resource [PG01] (on)
>[    0.387552] ACPI: Power Resource [PG02] (on)
>[    0.450567] ACPI: Power Resource [FN00] (off)
>[    0.450784] ACPI: Power Resource [FN01] (on)
>[    0.461273] ACPI: Power Resource [FN02] (on)
>[    0.461484] ACPI: Power Resource [FN03] (on)
>[    0.461717] ACPI: Power Resource [FN04] (off)
>[    0.463678] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
>[    0.463692] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
>[    0.464433] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
>[    0.465330] PCI host bridge to bus 0000:00
>[    0.465337] pci_bus 0000:00: root bus resource [bus 00-fe]
>[    0.465342] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
>[    0.465347] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
>[    0.465352] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
>[    0.465357] pci_bus 0000:00: root bus resource [mem 0xaf800000-0xfeafffff]
>[    0.465373] pci 0000:00:00.0: [8086:1604] type 00 class 0x060000
>[    0.465767] pci 0000:00:02.0: [8086:1626] type 00 class 0x030000
>[    0.465787] pci 0000:00:02.0: reg 0x10: [mem 0xc0000000-0xc0ffffff 64bit]
>[    0.465798] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
>[    0.465829] pci 0000:00:02.0: reg 0x20: [io  0x3000-0x303f]
>[    0.466228] pci 0000:00:03.0: [8086:160c] type 00 class 0x040300
>[    0.466240] pci 0000:00:03.0: reg 0x10: [mem 0xc1030000-0xc1033fff 64bit]
>[    0.466646] pci 0000:00:14.0: [8086:9cb1] type 00 class 0x0c0330
>[    0.466670] pci 0000:00:14.0: reg 0x10: [mem 0xc1020000-0xc102ffff 64bit]
>[    0.466743] pci 0000:00:14.0: PME# supported from D3hot D3cold
>[    0.467027] pci 0000:00:14.0: System wakeup disabled by ACPI
>[    0.467119] pci 0000:00:16.0: [8086:9cba] type 00 class 0x078000
>[    0.467143] pci 0000:00:16.0: reg 0x10: [mem 0xc1039000-0xc103901f 64bit]
>[    0.467223] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
>[    0.467586] pci 0000:00:19.0: [8086:15a2] type 00 class 0x020000
>[    0.467608] pci 0000:00:19.0: reg 0x10: [mem 0xc1000000-0xc101ffff]
>[    0.467618] pci 0000:00:19.0: reg 0x14: [mem 0xc103c000-0xc103cfff]
>[    0.467629] pci 0000:00:19.0: reg 0x18: [io  0x3080-0x309f]
>[    0.467702] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
>[    0.467984] pci 0000:00:19.0: System wakeup disabled by ACPI
>[    0.468079] pci 0000:00:1b.0: [8086:9ca0] type 00 class 0x040300
>[    0.468101] pci 0000:00:1b.0: reg 0x10: [mem 0xc1034000-0xc1037fff 64bit]
>[    0.468169] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>[    0.468452] pci 0000:00:1b.0: System wakeup disabled by ACPI
>[    0.468559] pci 0000:00:1f.0: [8086:9cc3] type 00 class 0x060100
>[    0.469026] pci 0000:00:1f.2: [8086:9c83] type 00 class 0x010601
>[    0.469046] pci 0000:00:1f.2: reg 0x10: [io  0x30a8-0x30af]
>[    0.469056] pci 0000:00:1f.2: reg 0x14: [io  0x30b4-0x30b7]
>[    0.469065] pci 0000:00:1f.2: reg 0x18: [io  0x30a0-0x30a7]
>[    0.469075] pci 0000:00:1f.2: reg 0x1c: [io  0x30b0-0x30b3]
>[    0.469084] pci 0000:00:1f.2: reg 0x20: [io  0x3060-0x307f]
>[    0.469094] pci 0000:00:1f.2: reg 0x24: [mem 0xc103b000-0xc103b7ff]
>[    0.469141] pci 0000:00:1f.2: PME# supported from D3hot
>[    0.469490] pci 0000:00:1f.3: [8086:9ca2] type 00 class 0x0c0500
>[    0.469508] pci 0000:00:1f.3: reg 0x10: [mem 0xc1038000-0xc10380ff 64bit]
>[    0.469533] pci 0000:00:1f.3: reg 0x20: [io  0xefa0-0xefbf]
>[    0.469903] pci 0000:00:1f.6: [8086:9ca4] type 00 class 0x118000
>[    0.469936] pci 0000:00:1f.6: reg 0x10: [mem 0xc103a000-0xc103afff 64bit]
>[    0.470373] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
>[    0.475787] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15), disabled.
>[    0.475869] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    0.475943] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15), disabled.
>[    0.476016] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15), disabled.
>[    0.476088] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *10 11 12 14 15), disabled.
>[    0.476160] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    0.476264] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15), disabled.
>[    0.476337] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    0.476770] ACPI: Enabled 5 GPEs in block 00 to 7F
>[    0.477078] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
>[    0.477386] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
>[    0.477394] vgaarb: loaded
>[    0.477397] vgaarb: bridge control possible 0000:00:02.0
>[    0.477617] SCSI subsystem initialized
>[    0.477797] libata version 3.00 loaded.
>[    0.478038] ACPI: bus type USB registered
>[    0.478143] usbcore: registered new interface driver usbfs
>[    0.478192] usbcore: registered new interface driver hub
>[    0.478279] usbcore: registered new device driver usb
>[    0.478464] pps_core: LinuxPPS API ver. 1 registered
>[    0.478468] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
>[    0.478504] PTP clock support registered
>[    0.478761] PCI: Using ACPI for IRQ routing
>[    0.486036] PCI: pci_cache_line_size set to 64 bytes
>[    0.486073] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
>[    0.486076] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
>[    0.486078] e820: reserve RAM buffer [mem 0xa7eef000-0xa7ffffff]
>[    0.486081] e820: reserve RAM buffer [mem 0xa7ef1000-0xa7ffffff]
>[    0.486084] e820: reserve RAM buffer [mem 0xa7f06000-0xa7ffffff]
>[    0.486086] e820: reserve RAM buffer [mem 0xa7f0a000-0xa7ffffff]
>[    0.486088] e820: reserve RAM buffer [mem 0xa800e000-0xabffffff]
>[    0.486093] e820: reserve RAM buffer [mem 0xa8031000-0xabffffff]
>[    0.486097] e820: reserve RAM buffer [mem 0xa809a000-0xabffffff]
>[    0.486102] e820: reserve RAM buffer [mem 0xa80a0000-0xabffffff]
>[    0.486106] e820: reserve RAM buffer [mem 0xa825f000-0xabffffff]
>[    0.486109] e820: reserve RAM buffer [mem 0xa8368000-0xabffffff]
>[    0.486112] e820: reserve RAM buffer [mem 0xab04e000-0xabffffff]
>[    0.486115] e820: reserve RAM buffer [mem 0xab8ff000-0xabffffff]
>[    0.486118] e820: reserve RAM buffer [mem 0x14f800000-0x14fffffff]
>[    0.486401] NetLabel: Initializing
>[    0.486405] NetLabel:  domain hash size = 128
>[    0.486408] NetLabel:  protocols = UNLABELED CIPSOv4
>[    0.486428] NetLabel:  unlabeled traffic allowed by default
>[    0.486605] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
>[    0.486618] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
>[    0.488654] Switched to clocksource hpet
>[    0.488781] pnp: PnP ACPI init
>[    0.488802] ACPI: bus type PNP registered
>[    0.489289] system 00:00: [io  0x06a4] has been reserved
>[    0.489295] system 00:00: [io  0x06a0] has been reserved
>[    0.489301] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.489444] pnp 00:01: [dma 4]
>[    0.489526] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
>[    0.489621] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
>[    0.489851] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
>[    0.489989] system 00:04: [io  0x0680-0x069f] has been reserved
>[    0.489996] system 00:04: [io  0xffff] has been reserved
>[    0.490000] system 00:04: [io  0xffff] has been reserved
>[    0.490005] system 00:04: [io  0xffff] has been reserved
>[    0.490010] system 00:04: [io  0x1800-0x18fe] could not be reserved
>[    0.490015] system 00:04: [io  0x164e-0x164f] has been reserved
>[    0.490021] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.490143] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
>[    0.490244] system 00:06: [io  0x1854-0x1857] has been reserved
>[    0.490251] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
>[    0.490455] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
>[    0.490701] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
>[    0.491570] system 00:09: [mem 0xfe102000-0xfe102fff] has been reserved
>[    0.491577] system 00:09: [mem 0xfe104000-0xfe104fff] has been reserved
>[    0.491583] system 00:09: [mem 0xfe106000-0xfe106fff] has been reserved
>[    0.491588] system 00:09: [mem 0xfe10e000-0xfe10efff] has been reserved
>[    0.491593] system 00:09: [mem 0xfe112000-0xfe112fff] has been reserved
>[    0.491598] system 00:09: [mem 0xfe111000-0xfe111007] has been reserved
>[    0.491604] system 00:09: [mem 0xfe111014-0xfe111fff] has been reserved
>[    0.491610] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.491836] pnp 00:0a: Plug and Play ACPI device, IDs INT3437 (active)
>[    0.502854] pnp 00:0b: Plug and Play ACPI device, IDs INT3432 (active)
>[    0.507846] pnp 00:0c: Plug and Play ACPI device, IDs INT3433 (active)
>[    0.508862] system 00:0d: [mem 0xfed1c000-0xfed1ffff] has been reserved
>[    0.508869] system 00:0d: [mem 0xfed10000-0xfed17fff] has been reserved
>[    0.508874] system 00:0d: [mem 0xfed18000-0xfed18fff] has been reserved
>[    0.508879] system 00:0d: [mem 0xfed19000-0xfed19fff] has been reserved
>[    0.508885] system 00:0d: [mem 0xe0000000-0xefffffff] could not be reserved
>[    0.508890] system 00:0d: [mem 0xfed20000-0xfed3ffff] has been reserved
>[    0.508898] system 00:0d: [mem 0xfed90000-0xfed93fff] has been reserved
>[    0.508903] system 00:0d: [mem 0xfed45000-0xfed8ffff] has been reserved
>[    0.508908] system 00:0d: [mem 0xff000000-0xffffffff] has been reserved
>[    0.508913] system 00:0d: [mem 0xfee00000-0xfeefffff] has been reserved
>[    0.508918] system 00:0d: [mem 0xaf810000-0xaf81ffff] has been reserved
>[    0.508924] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.509372] system 00:0e: [mem 0x00000000-0x0009cfff] could not be reserved
>[    0.509379] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
>[    0.509592] pnp: PnP ACPI: found 15 devices
>[    0.509595] ACPI: bus type PNP unregistered
>[    0.521242] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
>[    0.521247] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
>[    0.521250] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
>[    0.521253] pci_bus 0000:00: resource 7 [mem 0xaf800000-0xfeafffff]
>[    0.521302] NET: Registered protocol family 2
>[    0.521536] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
>[    0.521660] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
>[    0.521762] TCP: Hash tables configured (established 32768 bind 32768)
>[    0.521797] TCP: reno registered
>[    0.521811] UDP hash table entries: 2048 (order: 4, 65536 bytes)
>[    0.521838] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
>[    0.521933] NET: Registered protocol family 1
>[    0.522051] RPC: Registered named UNIX socket transport module.
>[    0.522058] RPC: Registered udp transport module.
>[    0.522061] RPC: Registered tcp transport module.
>[    0.522064] RPC: Registered tcp NFSv4.1 backchannel transport module.
>[    0.522076] pci 0000:00:02.0: Boot video device
>[    0.522205] pci 0000:00:14.0: can't derive routing for PCI INT A
>[    0.522211] pci 0000:00:14.0: PCI INT A: no GSI - using ISA IRQ 11
>[    0.522345] pci 0000:00:14.0: can't derive routing for PCI INT A
>[    0.522369] PCI: CLS 0 bytes, default 64
>[    1.261454] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>[    1.261466] software IO TLB [mem 0xa3eef000-0xa7eef000] (64MB) mapped at [ffff8800a3eef000-ffff8800a7eeefff]
>[    1.261650] Simple Boot Flag at 0x47 set to 0x80
>[    1.263776] futex hash table entries: 2048 (order: 5, 131072 bytes)
>[    1.263857] audit: initializing netlink subsys (disabled)
>[    1.263873] audit: type=2000 audit(979429803.216:1): initialized
>[    1.307822] HugeTLB registered 2 MB page size, pre-allocated 0 pages
>[    1.313134] VFS: Disk quotas dquot_6.5.2
>[    1.313267] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>[    1.315522] NFS: Registering the id_resolver key type
>[    1.315538] Key type id_resolver registered
>[    1.315542] Key type id_legacy registered
>[    1.315548] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>[    1.315951] fuse init (API version 7.22)
>[    1.316253] msgmni has been set to 7688
>[    1.316804] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
>[    1.316810] io scheduler noop registered
>[    1.316814] io scheduler deadline registered
>[    1.316920] io scheduler cfq registered (default)
>[    1.317247] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>[    1.317446] efifb: probing for efifb
>[    1.318264] efifb: framebuffer at 0xb0000000, mapped to 0xffffc90010880000, using 5120k, total 5120k
>[    1.318270] efifb: mode is 1280x1024x32, linelength=5120, pages=1280
>[    1.318273] efifb: scrolling: redraw
>[    1.318278] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
>[    1.324515] Console: switching to colour frame buffer device 160x64
>[    1.330233] fb0: EFI VGA frame buffer device
>[    1.330521] ACPI: Fan [FAN0] (off)
>[    1.330647] ACPI: Fan [FAN1] (on)
>[    1.330771] ACPI: Fan [FAN2] (on)
>[    1.330871] ACPI: Fan [FAN3] (on)
>[    1.330982] ACPI: Fan [FAN4] (off)
>[    1.331640] Monitor-Mwait will be used to enter C-1 state
>[    1.370457] thermal LNXTHERM:00: registered as thermal_zone0
>[    1.370507] ACPI: Thermal Zone [TZ00] (55 C)
>[    1.382412] thermal LNXTHERM:01: registered as thermal_zone1
>[    1.382459] ACPI: Thermal Zone [TZ01] (0 C)
>[    1.382666] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>[    1.403440] 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
>[    1.404783] Non-volatile memory driver v1.3
>[    1.404820] Linux agpgart interface v0.103
>[    1.408594] brd: module loaded
>[    1.409152] Loading iSCSI transport class v2.0-870.
>[    1.410128] iscsi: registered transport (tcp)
>[    1.410403] Adaptec aacraid driver 1.2-0[30200]-ms
>[    1.410520] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
>[    1.410858] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.06.00.12-k.
>[    1.411075] iscsi: registered transport (qla4xxx)
>[    1.411177] QLogic iSCSI HBA Driver
>[    1.411345] DC390: clustering now enabled by default. If you get problems load
>[    1.411400]        with "disable_clustering=1" and report to maintainers
>[    1.411584] GDT-HA: Storage RAID Controller Driver. Version: 3.05
>[    1.411823] RocketRAID 3xxx/4xxx Controller driver v1.8
>[    1.411930] stex: Promise SuperTrak EX Driver version: 4.6.0000.4
>[    1.412109] st: Version 20101219, fixed bufsize 32768, s/g segs 256
>[    1.412265] osst :I: Tape driver with OnStream support version 0.99.4
>osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
>[    1.412778] SCSI Media Changer driver v0.25 
>[    1.412952] ahci 0000:00:1f.2: version 3.0
>[    1.413151] ahci 0000:00:1f.2: irq 56 for MSI/MSI-X
>[    1.413197] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 3 ports 6 Gbps 0x2 impl SATA mode
>[    1.413263] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst 
>[    1.414311] scsi0 : ahci
>[    1.416477] scsi1 : ahci
>[    1.418566] scsi2 : ahci
>[    1.420585] ata1: DUMMY
>[    1.422373] ata2: SATA max UDMA/133 abar m2048@0xc103b000 port 0xc103b180 irq 56
>[    1.424182] ata3: DUMMY
>[    1.429700] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.20 (March 14, 2014)
>[    1.431566] bnx2x: Broadcom NetXtreme II 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.78.17-0 (2013/04/11)
>[    1.433638] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
>[    1.435535] e100: Copyright(c) 1999-2006 Intel Corporation
>[    1.437555] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
>[    1.439466] e1000: Copyright (c) 1999-2006 Intel Corporation.
>[    1.441441] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
>[    1.443343] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
>[    1.445486] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
>[    1.447445] e1000e 0000:00:19.0: irq 57 for MSI/MSI-X
>[    1.730233] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[    1.734120] ata2.00: ATA-9: INTEL SSDSC2BB240G4, D2010370, max UDMA/133
>[    1.737590] ata2.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 31/32)
>[    1.741470] ata2.00: configured for UDMA/133
>[    1.745087] scsi 1:0:0:0: Direct-Access     ATA      INTEL SSDSC2BB24 D201 PQ: 0 ANSI: 5
>[    1.747484] sd 1:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/223 GiB)
>[    1.747660] sd 1:0:0:0: Attached scsi generic sg0 type 0
>[    1.751552] sd 1:0:0:0: [sda] 4096-byte physical blocks
>[    1.753575] sd 1:0:0:0: [sda] Write Protect is off
>[    1.755536] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[    1.755554] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    1.759182]  sda: sda1 sda2 sda3 sda4 sda5
>[    1.761962] sd 1:0:0:0: [sda] Attached SCSI disk
>[    2.263038] tsc: Refined TSC clocksource calibration: 1197.230 MHz
>[    2.649399] e1000e: probe of 0000:00:19.0 failed with error -2
>[    2.651551] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.5-k
>[    2.653645] igb: Copyright (c) 2007-2013 Intel Corporation.
>[    2.655919] usbcore: registered new interface driver zd1201
>[    2.658082] usbcore: registered new interface driver catc
>[    2.660229] usbcore: registered new interface driver kaweth
>[    2.662297] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
>[    2.664436] usbcore: registered new interface driver pegasus
>[    2.666597] usbcore: registered new interface driver rtl8150
>[    2.668714] usbcore: registered new interface driver asix
>[    2.670789] usbcore: registered new interface driver ax88179_178a
>[    2.672849] usbcore: registered new interface driver cdc_ether
>[    2.674915] usbcore: registered new interface driver dm9601
>[    2.676953] usbcore: registered new interface driver gl620a
>[    2.678987] usbcore: registered new interface driver net1080
>[    2.681006] usbcore: registered new interface driver plusb
>[    2.682976] usbcore: registered new interface driver rndis_host
>[    2.684913] usbcore: registered new interface driver cdc_subset
>[    2.686804] usbcore: registered new interface driver zaurus
>[    2.688697] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
>[    2.690588] usbcore: registered new interface driver cdc_ncm
>[    2.692677] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>[    2.694470] ehci-pci: EHCI PCI platform driver
>[    2.696398] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>[    2.698199] ohci-pci: OHCI PCI platform driver
>[    2.700042] uhci_hcd: USB Universal Host Controller Interface driver
>[    2.702041] xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A
>[    2.703828] xhci_hcd 0000:00:14.0: PCI INT A: no GSI - using ISA IRQ 11
>[    2.705652] xhci_hcd 0000:00:14.0: xHCI Host Controller
>[    2.707506] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
>[    2.709357] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
>[    2.709386] xhci_hcd 0000:00:14.0: irq 57 for MSI/MSI-X
>[    2.709466] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>[    2.711212] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    2.712985] usb usb1: Product: xHCI Host Controller
>[    2.714762] usb usb1: Manufacturer: Linux 3.14.0_drm-intel-next-queued_e5c03c_20140504+ xhci_hcd
>[    2.716607] usb usb1: SerialNumber: 0000:00:14.0
>[    2.718684] hub 1-0:1.0: USB hub found
>[    2.720503] hub 1-0:1.0: 11 ports detected
>[    2.727082] xhci_hcd 0000:00:14.0: xHCI Host Controller
>[    2.728971] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
>[    2.730749] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
>[    2.732498] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    2.734233] usb usb2: Product: xHCI Host Controller
>[    2.735948] usb usb2: Manufacturer: Linux 3.14.0_drm-intel-next-queued_e5c03c_20140504+ xhci_hcd
>[    2.737702] usb usb2: SerialNumber: 0000:00:14.0
>[    2.739693] hub 2-0:1.0: USB hub found
>[    2.741433] hub 2-0:1.0: 4 ports detected
>[    2.745177] usbcore: registered new interface driver usb-storage
>[    2.747044] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
>[    2.748734] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
>[    2.750957] serio: i8042 KBD port at 0x60,0x64 irq 1
>[    2.752896] mousedev: PS/2 mouse device common for all mice
>[    2.754803] rtc_cmos 00:05: RTC can wake from S4
>[    2.756728] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
>[    2.758477] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
>[    2.760296] i2c /dev entries driver
>[    2.762174] hidraw: raw HID events driver (C) Jiri Kosina
>[    2.765152] usbcore: registered new interface driver usbhid
>[    2.766862] usbhid: USB HID core driver
>[    2.768786] TCP: cubic registered
>[    2.770461] Initializing XFRM netlink socket
>[    2.772157] NET: Registered protocol family 17
>[    2.773842] Key type dns_resolver registered
>[    2.776441] registered taskstats version 1
>[    2.778742] bio: create slab <bio-1> at 1
>[    2.780951] Btrfs loaded
>[    2.782954]   Magic number: 1:174:858
>[    2.784796] PM: Hibernation image not present or could not be loaded.
>[    2.784829] Warning: unable to open an initial console.
>[    2.792941] Freeing unused kernel memory: 22728K (ffffffff81b52000 - ffffffff83184000)
>[    2.799874] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
>[    2.848998] dracut: dracut-018-35.git20120510.fc17
>[    2.893571] udevd[1397]: starting version 182
>[    2.918278] [drm] Initialized drm 1.1.0 20060810
>[    2.923521] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
>[    2.928833] ACPI: Lid Switch [LID0]
>[    2.932207] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
>[    2.936137] ACPI: Power Button [PWRB]
>[    2.936460] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
>[    2.936840] ACPI: Sleep Button [SLPB]
>[    2.937216] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
>[    2.937405] ACPI: Power Button [PWRF]
>[    2.945055] [drm:i915_dump_device_info] i915 device info: gen=8, pciid=0x1626 flags=is_mobile,need_gfx_hws,has_fbc,has_hotplug,has_llc,has_ddi,
>[    2.945056] [drm:intel_detect_pch] This is Broadwell, assuming LynxPoint LP PCH
>[    2.949486] [drm] Memory usable by graphics device = 4096M
>[    2.949488] [drm:i915_gem_gtt_init] GMADR size = 256M
>[    2.949489] [drm:i915_gem_gtt_init] GTT stolen size = 32M
>[    2.949492] checking generic (b0000000 500000) vs hw (b0000000 10000000)
>[    2.949493] fb: conflicting fb hw usage inteldrmfb vs EFI VGA - removing generic driver
>[    2.960321] Console: switching to colour dummy device 80x25
>[    3.003349] [drm:intel_opregion_setup] graphic opregion physical addr: 0xab87b018
>[    3.003365] [drm:intel_opregion_setup] Public ACPI methods supported
>[    3.003368] [drm:intel_opregion_setup] SWSCI supported
>[    3.008774] [drm:swsci_setup] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483
>[    3.008777] [drm:intel_opregion_setup] ASLE supported
>[    3.008861] i915 0000:00:02.0: irq 58 for MSI/MSI-X
>[    3.008873] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
>[    3.008878] [drm] Driver supports precise vblank timestamp query.
>[    3.008883] [drm:init_vbt_defaults] Set default to SSC at 120000 kHz
>[    3.008886] [drm:validate_vbt] Using VBT from OpRegion: $VBT HASWELL        d
>[    3.008891] [drm:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0
>[    3.008893] [drm:parse_general_definitions] crt_ddc_bus_pin: 2
>[    3.008897] [drm:parse_lfp_panel_data] DRRS supported mode is static
>[    3.008900] [drm:parse_lfp_panel_data] Found panel mode in BIOS VBT tables:
>[    3.008905] [drm:drm_mode_debug_printmodeline] Modeline 0:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
>[    3.008908] [drm:parse_lfp_panel_data] VBT initial LVDS value 300
>[    3.008912] [drm:parse_lfp_backlight] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255
>[    3.008915] [drm:parse_sdvo_panel_data] Found SDVO panel mode in BIOS VBT tables:
>[    3.008919] [drm:drm_mode_debug_printmodeline] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
>[    3.008922] [drm:parse_sdvo_device_mapping] No SDVO device info is found in VBT
>[    3.008925] [drm:parse_driver_features] DRRS State Enabled:1
>[    3.008927] [drm:parse_mipi] No MIPI config BDB found
>[    3.008931] [drm:parse_ddi_port] Port B VBT info: DP:1 HDMI:1 DVI:1 EDP:0 CRT:0
>[    3.008934] [drm:parse_ddi_port] VBT HDMI level shift for port B: 3
>[    3.008937] [drm:parse_ddi_port] Port C VBT info: DP:0 HDMI:1 DVI:1 EDP:0 CRT:0
>[    3.008939] [drm:parse_ddi_port] VBT HDMI level shift for port C: 3
>[    3.009013] [drm:intel_dsm_pci_probe] no _DSM method for intel device
>[    3.009021] [drm:i915_gem_init_stolen] found 33554432 bytes of stolen memory at ad800000
>[    3.009024] [drm:intel_display_power_get] enabling always-on
>[    3.009027] [drm:intel_display_power_get] enabling display
>[    3.009031] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
>[    3.009106] [drm:intel_print_wm_latency] Primary WM0 latency 20 (2.0 usec)
>[    3.009109] [drm:intel_print_wm_latency] Primary WM1 latency 50 (25.0 usec)
>[    3.009111] [drm:intel_print_wm_latency] Primary WM2 latency 90 (45.0 usec)
>[    3.009114] [drm:intel_print_wm_latency] Primary WM3 latency 130 (65.0 usec)
>[    3.009116] [drm:intel_print_wm_latency] Primary WM4 latency 160 (80.0 usec)
>[    3.009119] [drm:intel_print_wm_latency] Sprite WM0 latency 20 (2.0 usec)
>[    3.009121] [drm:intel_print_wm_latency] Sprite WM1 latency 50 (25.0 usec)
>[    3.009123] [drm:intel_print_wm_latency] Sprite WM2 latency 90 (45.0 usec)
>[    3.009126] [drm:intel_print_wm_latency] Sprite WM3 latency 130 (65.0 usec)
>[    3.009128] [drm:intel_print_wm_latency] Sprite WM4 latency 160 (80.0 usec)
>[    3.009130] [drm:intel_print_wm_latency] Cursor WM0 latency 20 (2.0 usec)
>[    3.009133] [drm:intel_print_wm_latency] Cursor WM1 latency 50 (25.0 usec)
>[    3.009135] [drm:intel_print_wm_latency] Cursor WM2 latency 90 (45.0 usec)
>[    3.009137] [drm:intel_print_wm_latency] Cursor WM3 latency 130 (65.0 usec)
>[    3.009140] [drm:intel_print_wm_latency] Cursor WM4 latency 160 (80.0 usec)
>[    3.009143] [drm:intel_modeset_init] 3 display pipes available.
>[    3.009169] [drm:intel_ddi_pll_init] CDCLK running at 450000KHz
>[    3.009476] [drm:intel_dp_init_connector] Adding eDP connector on port A
>[    3.009633] [drm:intel_dp_init_panel_power_sequencer] cur t1_t3 0 t8 0 t9 0 t10 0 t11_t12 6000
>[    3.009636] [drm:intel_dp_init_panel_power_sequencer] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000
>[    3.009639] [drm:intel_dp_init_panel_power_sequencer] panel power up delay 200, power down delay 50, power cycle delay 600
>[    3.009642] [drm:intel_dp_init_panel_power_sequencer] backlight on delay 1, off delay 200
>[    3.009644] [drm:intel_dp_aux_init] registering DPDDC-A bus for card0-eDP-1
>[    3.013343] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x754500e1
>[    3.018315] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x754500e1
>[    3.023318] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x754500e1
>[    3.024761] [drm] failed to retrieve link info, disabling eDP
>[    3.024935] [drm:edp_panel_vdd_off_sync] Turning eDP VDD off
>[    3.024942] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0000
>[    3.024944] ------------[ cut here ]------------
>[    3.024984] WARNING: CPU: 0 PID: 1405 at drivers/gpu/drm/i915/intel_pm.c:5832 intel_display_power_put+0x39/0xf8 [i915]()
>[    3.024989] Modules linked in: i915(+) video button drm_kms_helper drm
>[    3.025002] CPU: 0 PID: 1405 Comm: udevd Not tainted 3.14.0_drm-intel-next-queued_e5c03c_20140504+ #2290
>[    3.025008]  0000000000000000 0000000000000009 ffffffff81717233 0000000000000000
>[    3.025015]  ffffffff81035052 0000000000000000 ffffffffa0069829 0000000000000002
>[    3.025021]  ffff880002d20000 000000000000000b ffff880149a1ca48 ffff8800aad9d0d0
>[    3.025028] Call Trace:
>[    3.025038]  [<ffffffff81717233>] ? dump_stack+0x41/0x51
>[    3.025045]  [<ffffffff81035052>] ? warn_slowpath_common+0x73/0x8b
>[    3.025077]  [<ffffffffa0069829>] ? intel_display_power_put+0x39/0xf8 [i915]
>[    3.025105]  [<ffffffffa0069829>] ? intel_display_power_put+0x39/0xf8 [i915]
>[    3.025151]  [<ffffffffa00b541e>] ? intel_dp_init_connector+0x627/0x706 [i915]
>[    3.025194]  [<ffffffffa00b0340>] ? intel_ddi_init+0x18d/0x219 [i915]
>[    3.025235]  [<ffffffffa00a2840>] ? intel_modeset_init+0x7ef/0xfc4 [i915]
>[    3.025274]  [<ffffffffa0083df3>] ? gen8_irq_postinstall+0x2ff/0x310 [i915]
>[    3.025287]  [<ffffffffa0005ad3>] ? drm_irq_install+0x170/0x1d6 [drm]
>[    3.025331]  [<ffffffffa00c51bd>] ? i915_driver_load+0xb1d/0xe01 [i915]
>[    3.025340]  [<ffffffff8170f535>] ? klist_add_tail+0x1d/0x40
>[    3.025354]  [<ffffffffa000734a>] ? drm_dev_register+0x74/0xe7 [drm]
>[    3.025362]  [<ffffffff81325a42>] ? acpi_pci_irq_enable+0x179/0x18c
>[    3.025375]  [<ffffffffa0009545>] ? drm_get_pci_dev+0xfc/0x1b9 [drm]
>[    3.025381]  [<ffffffff81385095>] ? __pm_runtime_resume+0x5b/0x6a
>[    3.025389]  [<ffffffff812f8e09>] ? local_pci_probe+0x35/0x7a
>[    3.025396]  [<ffffffff8137cb44>] ? driver_probe_device+0x1b3/0x1b3
>[    3.025402]  [<ffffffff812f90ac>] ? pci_device_probe+0xcc/0xf0
>[    3.025409]  [<ffffffff8137ca23>] ? driver_probe_device+0x92/0x1b3
>[    3.025415]  [<ffffffff8137cb97>] ? __driver_attach+0x53/0x73
>[    3.025422]  [<ffffffff8137b2fe>] ? bus_for_each_dev+0x4e/0x7f
>[    3.025428]  [<ffffffff8137c2a5>] ? bus_add_driver+0xe2/0x1c7
>[    3.025435]  [<ffffffff8137d0da>] ? driver_register+0x82/0xb5
>[    3.025440]  [<ffffffffa00fe000>] ? 0xffffffffa00fdfff
>[    3.025446]  [<ffffffff81000296>] ? do_one_initcall+0x78/0xfa
>[    3.025453]  [<ffffffff8104e4af>] ? __blocking_notifier_call_chain+0x4f/0x5d
>[    3.025461]  [<ffffffff8107fee2>] ? load_module+0x1745/0x1a13
>[    3.025468]  [<ffffffff8107db08>] ? mod_kobject_put+0x42/0x42
>[    3.025474]  [<ffffffff81080240>] ? SyS_init_module+0x90/0x9b
>[    3.025484]  [<ffffffff817218a2>] ? system_call_fastpath+0x16/0x1b
>[    3.025488] ---[ end trace bf9b5f7ec92455f4 ]---
>[    3.025493] [drm:intel_display_power_put] disabling always-on
>[    3.025572] [drm:intel_dp_init_connector] Adding DP connector on port B
>[    3.025718] [drm:intel_dp_aux_init] registering DPDDC-B bus for card0-DP-1
>[    3.031783] [drm:intel_modeset_readout_hw_state] [CRTC:5] hw state readout: enabled
>[    3.031787] [drm:intel_modeset_readout_hw_state] [CRTC:8] hw state readout: disabled
>[    3.031791] [drm:intel_modeset_readout_hw_state] [CRTC:11] hw state readout: disabled
>[    3.031795] [drm:intel_ddi_get_crtc_pll] Pipe A connected to port C using clock 0x80000000
>[    3.031799] [drm:intel_modeset_readout_hw_state] [ENCODER:13:TMDS-13] hw state readout: disabled, pipe A
>[    3.031804] [drm:intel_modeset_readout_hw_state] [ENCODER:18:TMDS-18] hw state readout: enabled, pipe A
>[    3.031808] [drm:intel_modeset_readout_hw_state] [CONNECTOR:14:DP-1] hw state readout: disabled
>[    3.031811] [drm:intel_modeset_readout_hw_state] [CONNECTOR:17:HDMI-A-1] hw state readout: disabled
>[    3.031815] [drm:intel_modeset_readout_hw_state] [CONNECTOR:19:HDMI-A-2] hw state readout: enabled
>[    3.031819] [drm:intel_dump_pipe_config] [CRTC:5][setup_hw_state] config for pipe A
>[    3.031821] [drm:intel_dump_pipe_config] cpu_transcoder: A
>[    3.031823] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
>[    3.031827] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    3.031830] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    3.031832] [drm:intel_dump_pipe_config] requested mode:
>[    3.031836] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 1280 0 0 0 1024 0 0 0 0x0 0x0
>[    3.031838] [drm:intel_dump_pipe_config] adjusted mode:
>[    3.031842] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x5
>[    3.031846] [drm:intel_dump_crtc_timings] crtc timings: 108000 1280 1328 1440 1688 1024 1025 1028 1066, type: 0x0 flags: 0x5
>[    3.031848] [drm:intel_dump_pipe_config] port clock: 108000
>[    3.031850] [drm:intel_dump_pipe_config] pipe src size: 1280x1024
>[    3.031853] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    3.031856] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x05000400, enabled
>[    3.031858] [drm:intel_dump_pipe_config] ips: 0
>[    3.031860] [drm:intel_dump_pipe_config] double wide: 0
>[    3.031863] [drm:intel_dump_pipe_config] [CRTC:8][setup_hw_state] config for pipe B
>[    3.031865] [drm:intel_dump_pipe_config] cpu_transcoder: B
>[    3.031867] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
>[    3.031870] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    3.031873] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    3.031875] [drm:intel_dump_pipe_config] requested mode:
>[    3.031878] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    3.031880] [drm:intel_dump_pipe_config] adjusted mode:
>[    3.031883] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    3.031887] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[    3.031889] [drm:intel_dump_pipe_config] port clock: 0
>[    3.031891] [drm:intel_dump_pipe_config] pipe src size: 0x0
>[    3.031893] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    3.031896] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    3.031897] [drm:intel_dump_pipe_config] ips: 0
>[    3.031899] [drm:intel_dump_pipe_config] double wide: 0
>[    3.031902] [drm:intel_dump_pipe_config] [CRTC:11][setup_hw_state] config for pipe C
>[    3.031904] [drm:intel_dump_pipe_config] cpu_transcoder: C
>[    3.031906] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
>[    3.031909] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    3.031912] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    3.031913] [drm:intel_dump_pipe_config] requested mode:
>[    3.031917] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    3.031919] [drm:intel_dump_pipe_config] adjusted mode:
>[    3.031922] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    3.031925] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[    3.031927] [drm:intel_dump_pipe_config] port clock: 0
>[    3.031929] [drm:intel_dump_pipe_config] pipe src size: 0x0
>[    3.031932] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    3.031934] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    3.031936] [drm:intel_dump_pipe_config] ips: 0
>[    3.031938] [drm:intel_dump_pipe_config] double wide: 0
>[    3.031947] [drm:intel_connector_check_state] [CONNECTOR:19:HDMI-A-2]
>[    3.031950] [drm:check_encoder_state] [ENCODER:13:TMDS-13]
>[    3.031953] [drm:check_encoder_state] [ENCODER:18:TMDS-18]
>[    3.031956] [drm:check_crtc_state] [CRTC:5]
>[    3.031964] [drm:check_crtc_state] [CRTC:8]
>[    3.031967] [drm:check_crtc_state] [CRTC:11]
>[    3.031975] [drm:ironlake_get_plane_config] pipe/plane 0/0 with fb: size=1280x1024@32, offset=0, pitch 5120, size 0x500000
>[    3.031978] [drm:i915_gem_object_create_stolen_for_preallocated] creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=500000
>[    3.031982] [drm:i915_pages_create_for_stolen] offset=0x0, size=5242880
>[    3.031987] [drm:intel_alloc_plane_obj] plane fb obj ffff8800aad78480
>[    3.031990] [drm:i915_gem_setup_global_gtt] reserving preallocated space: 0 + 500000
>[    3.031993] [drm:i915_gem_setup_global_gtt] clearing unused GTT space: [500000, fffff000]
>[    3.035633] [drm:gen8_ppgtt_init] Allocated 4 pages for page directories (0 wasted)
>[    3.035636] [drm:gen8_ppgtt_init] Allocated 2048 pages for page tables (0 wasted)
>[    3.035639] [drm:i915_gem_context_init] HW context support initialized
>[    3.035656] [drm:init_status_page] render ring hws offset: 0x00512000
>[    3.035793] [drm:init_pipe_control] render ring pipe control offset: 0x00533000
>[    3.035801] [drm:init_status_page] bsd ring hws offset: 0x00534000
>[    3.035911] [drm:init_status_page] blitter ring hws offset: 0x00555000
>[    3.036034] [drm:init_status_page] video enhancement ring hws offset: 0x00576000
>[    3.036132] [drm:init_status_page] bds2_ring hws offset: 0x00597000
>[    3.036345] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:14:DP-1]
>[    3.036348] [drm:intel_display_power_get] enabling always-on
>[    3.036351] [drm:intel_dp_detect] [CONNECTOR:14:DP-1]
>[    3.036356] [drm:intel_display_power_put] disabling always-on
>[    3.036358] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:14:DP-1] disconnected
>[    3.036361] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:17:HDMI-A-1]
>[    3.036364] [drm:intel_hdmi_detect] [CONNECTOR:17:HDMI-A-1]
>[    3.036366] [drm:intel_display_power_get] enabling always-on
>[    3.036530] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
>[    3.036533] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
>[    3.036535] [drm:intel_display_power_put] disabling always-on
>[    3.036538] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:17:HDMI-A-1] disconnected
>[    3.036540] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:19:HDMI-A-2]
>[    3.036542] [drm:intel_hdmi_detect] [CONNECTOR:19:HDMI-A-2]
>[    3.036545] [drm:intel_display_power_get] enabling always-on
>[    3.049263] [drm:intel_display_power_put] disabling always-on
>[    3.049265] [drm:intel_display_power_get] enabling always-on
>[    3.062001] [drm:drm_edid_to_eld] ELD: no CEA Extension found
>[    3.062003] [drm:intel_display_power_put] disabling always-on
>[    3.062013] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:19:HDMI-A-2] probed modes :
>[    3.062018] [drm:drm_mode_debug_printmodeline] Modeline 22:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
>[    3.062022] [drm:drm_mode_debug_printmodeline] Modeline 29:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[    3.062026] [drm:drm_mode_debug_printmodeline] Modeline 23:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
>[    3.062030] [drm:drm_mode_debug_printmodeline] Modeline 24:"1280x720" 60 74440 1280 1336 1472 1664 720 721 724 746 0x0 0x6
>[    3.062034] [drm:drm_mode_debug_printmodeline] Modeline 30:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[    3.062037] [drm:drm_mode_debug_printmodeline] Modeline 31:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[    3.062041] [drm:drm_mode_debug_printmodeline] Modeline 32:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
>[    3.062045] [drm:drm_mode_debug_printmodeline] Modeline 25:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[    3.062048] [drm:drm_mode_debug_printmodeline] Modeline 26:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
>[    3.062052] [drm:drm_mode_debug_printmodeline] Modeline 27:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[    3.062056] [drm:drm_mode_debug_printmodeline] Modeline 28:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[    3.062058] [drm:drm_setup_crtcs] 
>[    3.062061] [drm:drm_enable_connectors] connector 14 enabled? no
>[    3.062063] [drm:drm_enable_connectors] connector 17 enabled? no
>[    3.062065] [drm:drm_enable_connectors] connector 19 enabled? yes
>[    3.062068] [drm:intel_fb_initial_config] connector 14 not enabled, skipping
>[    3.062070] [drm:intel_fb_initial_config] connector 17 not enabled, skipping
>[    3.062073] [drm:intel_fb_initial_config] looking for cmdline mode on connector 19
>[    3.062075] [drm:intel_fb_initial_config] looking for preferred mode on connector 19
>[    3.062078] [drm:intel_fb_initial_config] connector HDMI-A-2 on crtc 5: 1280x1024
>[    3.062080] [drm:drm_setup_crtcs] desired mode 1280x1024 set on crtc 5
>[    3.062083] [drm:intelfb_create] no BIOS fb, allocating a new one
>[    3.062086] [drm:i915_gem_object_create_stolen] creating stolen object: size=500000
>[    3.062090] [drm:i915_pages_create_for_stolen] offset=0x500000, size=5242880
>[    3.063720] [drm:intelfb_create] allocated 1280x1024 fb: 0x005b8000, bo ffff8800aad79800
>[    3.063867] fbcon: inteldrmfb (fb0) is primary device
>[    3.063964] [drm:intel_crtc_cursor_set] cursor off
>[    3.063968] [drm:intel_crtc_set_config] [CRTC:5] [FB:34] #connectors=1 (x y) (0 0)
>[    3.063971] [drm:intel_set_config_compute_mode_changes] modes are different, full mode set
>[    3.063976] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    3.063981] [drm:drm_mode_debug_printmodeline] Modeline 33:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
>[    3.063984] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=1, fb_changed=1
>[    3.063987] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:HDMI-A-2] to [CRTC:5]
>[    3.063991] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
>[    3.063995] [drm:connected_sink_compute_bpp] [CONNECTOR:19:HDMI-A-2] checking for sink bpp constrains
>[    3.063997] [drm:intel_hdmi_compute_config] picking bpc to 8 for HDMI output
>[    3.063999] [drm:intel_hdmi_compute_config] forcing pipe bpc to 24 for HDMI
>[    3.064002] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0
>[    3.064005] [drm:intel_dump_pipe_config] [CRTC:5][modeset] config for pipe A
>[    3.064006] [drm:intel_dump_pipe_config] cpu_transcoder: A
>[    3.064008] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
>[    3.064011] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    3.064014] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    3.064015] [drm:intel_dump_pipe_config] requested mode:
>[    3.064019] [drm:drm_mode_debug_printmodeline] Modeline 0:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
>[    3.064020] [drm:intel_dump_pipe_config] adjusted mode:
>[    3.064024] [drm:drm_mode_debug_printmodeline] Modeline 0:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
>[    3.064027] [drm:intel_dump_crtc_timings] crtc timings: 108000 1280 1328 1440 1688 1024 1025 1028 1066, type: 0x48 flags: 0x5
>[    3.064028] [drm:intel_dump_pipe_config] port clock: 108000
>[    3.064029] [drm:intel_dump_pipe_config] pipe src size: 1280x1024
>[    3.064031] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    3.064032] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    3.064033] [drm:intel_dump_pipe_config] ips: 1
>[    3.064034] [drm:intel_dump_pipe_config] double wide: 0
>[    3.079767] usb 1-1: new low-speed USB device number 2 using xhci_hcd
>[    3.095743] [drm:intel_update_fbc] no output, disabling
>[    3.095747] [drm:intel_display_power_get] enabling always-on
>[    3.095752] [drm:intel_ddi_put_crtc_pll] Disabling WRPLL 1
>[    3.097763] [drm:intel_ddi_pll_select] Using WRPLL 1 on pipe A
>[    3.097765] [drm:intel_ddi_pll_select] WRPLL: 108000KHz refresh rate with p=8, n2=24 r2=15
>[    3.099743] [drm:ironlake_update_primary_plane] Writing base 005B8000 00000000 0 0 5120
>[    3.099751] [drm:intel_crtc_mode_set] [ENCODER:18:TMDS-18] set [MODE:0:1280x1024]
>[    3.099752] [drm:intel_ddi_mode_set] Preparing DDI mode on port C, pipe A
>[    3.119726] [drm:intel_update_fbc] framebuffer not tiled or fenced, disabling compression
>[    3.119731] [drm:intel_connector_check_state] [CONNECTOR:19:HDMI-A-2]
>[    3.119733] [drm:check_encoder_state] [ENCODER:13:TMDS-13]
>[    3.119735] [drm:check_encoder_state] [ENCODER:18:TMDS-18]
>[    3.119738] [drm:check_crtc_state] [CRTC:5]
>[    3.119745] [drm:check_crtc_state] [CRTC:8]
>[    3.119747] [drm:check_crtc_state] [CRTC:11]
>[    3.119750] [drm:intel_crtc_cursor_set] cursor off
>[    3.119752] [drm:intel_crtc_set_config] [CRTC:8] [NOFB]
>[    3.119754] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[    3.119756] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:HDMI-A-2] to [CRTC:5]
>[    3.119758] [drm:intel_crtc_cursor_set] cursor off
>[    3.119759] [drm:intel_crtc_set_config] [CRTC:11] [NOFB]
>[    3.119761] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0
>[    3.119762] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:HDMI-A-2] to [CRTC:5]
>[    3.119767] Console: switching to colour frame buffer device 160x64
>[    3.119775] [drm:intel_crtc_set_config] [CRTC:5] [FB:34] #connectors=1 (x y) (0 0)
>[    3.119777] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[    3.119779] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:HDMI-A-2] to [CRTC:5]
>[    3.126060] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
>[    3.126107] i915 0000:00:02.0: registered panic notifier
>[    3.136844] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
>[    3.137806] acpi device:17: registered as cooling_device9
>[    3.138073] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5
>[    3.138468] [drm] RC6 disabled, disabling runtime PM support
>[    3.138556] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
>[    3.145018] dracut: Starting plymouth daemon
>[    3.156557] [drm:intel_crtc_set_config] [CRTC:5] [FB:34] #connectors=1 (x y) (0 0)
>[    3.156561] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[    3.156564] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:HDMI-A-2] to [CRTC:5]
>[    3.167363] [drm:i915_gem_open] 
>[    3.167398] [drm:intel_crtc_cursor_set] cursor off
>[    3.167403] [drm:intel_crtc_set_config] [CRTC:5] [FB:34] #connectors=1 (x y) (0 0)
>[    3.167409] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[    3.167413] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:HDMI-A-2] to [CRTC:5]
>[    3.167416] [drm:intel_crtc_cursor_set] cursor off
>[    3.167418] [drm:intel_crtc_set_config] [CRTC:8] [NOFB]
>[    3.167421] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[    3.167424] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:HDMI-A-2] to [CRTC:5]
>[    3.167427] [drm:intel_crtc_cursor_set] cursor off
>[    3.167429] [drm:intel_crtc_set_config] [CRTC:11] [NOFB]
>[    3.167432] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0
>[    3.167434] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:HDMI-A-2] to [CRTC:5]
>[    3.167447] [drm:i915_gem_open] 
>[    3.167459] [drm:intel_crtc_cursor_set] cursor off
>[    3.167462] [drm:intel_crtc_set_config] [CRTC:5] [FB:34] #connectors=1 (x y) (0 0)
>[    3.167465] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[    3.167468] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:HDMI-A-2] to [CRTC:5]
>[    3.167470] [drm:intel_crtc_cursor_set] cursor off
>[    3.167472] [drm:intel_crtc_set_config] [CRTC:8] [NOFB]
>[    3.167475] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[    3.167477] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:HDMI-A-2] to [CRTC:5]
>[    3.167479] [drm:intel_crtc_cursor_set] cursor off
>[    3.167481] [drm:intel_crtc_set_config] [CRTC:11] [NOFB]
>[    3.167484] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0
>[    3.167487] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:HDMI-A-2] to [CRTC:5]
>[    3.167495] [drm:i915_gem_open] 
>[    3.167852] [drm:intel_crtc_cursor_set] cursor off
>[    3.167858] [drm:intel_crtc_set_config] [CRTC:5] [FB:34] #connectors=1 (x y) (0 0)
>[    3.167863] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[    3.167868] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:HDMI-A-2] to [CRTC:5]
>[    3.167871] [drm:intel_crtc_cursor_set] cursor off
>[    3.167875] [drm:intel_crtc_set_config] [CRTC:8] [NOFB]
>[    3.167878] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[    3.167883] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:HDMI-A-2] to [CRTC:5]
>[    3.167886] [drm:intel_crtc_cursor_set] cursor off
>[    3.167889] [drm:intel_crtc_set_config] [CRTC:11] [NOFB]
>[    3.167893] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0
>[    3.167897] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:HDMI-A-2] to [CRTC:5]
>[    3.168184] dracut: error: unexpectedly disconnected from boot status daemon
>[    3.176706] [drm:intel_crtc_set_config] [CRTC:5] [FB:34] #connectors=1 (x y) (0 0)
>[    3.176710] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[    3.176713] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:HDMI-A-2] to [CRTC:5]
>[    3.248744] usb 1-1: New USB device found, idVendor=0461, idProduct=0010
>[    3.248819] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    3.248917] usb 1-1: Product: USB Keyboard
>[    3.248952] usb 1-1: Manufacturer: NOVATEK
>[    3.249174] usb 1-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
>[    3.249301] usb 1-1: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
>[    3.252507] input: NOVATEK USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:0461:0010.0001/input/input6
>[    3.252937] hid-generic 0003:0461:0010.0001: input,hidraw0: USB HID v1.10 Keyboard [NOVATEK USB Keyboard] on usb-0000:00:14.0-1/input0
>[    3.258110] input: NOVATEK USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:0461:0010.0002/input/input7
>[    3.258442] hid-generic 0003:0461:0010.0002: input,hidraw1: USB HID v1.10 Device [NOVATEK USB Keyboard] on usb-0000:00:14.0-1/input1
>[    3.264751] Switched to clocksource tsc
>[    3.272402] ACPI: AC Adapter [ADP1] (on-line)
>[    3.294716] ppdev: user-space parallel port driver
>[    3.300817] ACPI: Battery Slot [BAT0] (battery present)
>[    3.300920] ACPI: Battery Slot [BAT1] (battery absent)
>[    3.301096] ACPI: Battery Slot [BAT2] (battery absent)
>[    3.321000] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182f conflicts with OpRegion 0x0000000000001800-0x000000000000187f (\PMIO) (20131218/utaddress-258)
>[    3.321164] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[    3.321254] ACPI Warning: SystemIO range 0x0000000000000830-0x000000000000083f conflicts with OpRegion 0x0000000000000800-0x000000000000083f (\GPRL) (20131218/utaddress-258)
>[    3.321376] ACPI Warning: SystemIO range 0x0000000000000830-0x000000000000083f conflicts with OpRegion 0x0000000000000800-0x0000000000000bff (\GPR_) (20131218/utaddress-258)
>[    3.321497] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[    3.321572] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082f conflicts with OpRegion 0x0000000000000800-0x000000000000083f (\GPRL) (20131218/utaddress-258)
>[    3.321701] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082f conflicts with OpRegion 0x0000000000000800-0x0000000000000bff (\GPR_) (20131218/utaddress-258)
>[    3.327960] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082f conflicts with OpRegion 0x0000000000000810-0x0000000000000813 (\_PR_.IO_D) (20131218/utaddress-258)
>[    3.336115] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[    3.340811] lpc_ich: Resource conflict(s) found affecting gpio_ich
>[    3.343845] snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002)
>[    3.344452] input: PC Speaker as /devices/platform/pcspkr/input/input8
>[    3.344980] iTCO_vendor_support: vendor-support=0
>[    3.345753] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
>[    3.345794] iTCO_wdt: Found a Wildcat Point_LP TCO device (Version=2, TCOBASE=0x1860)
>[    3.370605] ALSA sound/pci/hda/hda_i915.c:58 HDA driver get symbol successfully from i915 module
>[    3.370691] snd_hda_intel 0000:00:03.0: irq 59 for MSI/MSI-X
>[    3.370820] i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003)
>[    3.371504] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>[    3.378314] ACPI Warning: SystemIO range 0x000000000000efa0-0x000000000000efbf conflicts with OpRegion 0x000000000000efa0-0x000000000000efaf (\_SB_.PCI0.SBUS.SMBI) (20131218/utaddress-258)
>[    3.389324] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[    3.389394] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
>[    3.389455] [drm:intel_crtc_set_config] [CRTC:5] [FB:34] #connectors=1 (x y) (0 0)
>[    3.389461] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[    3.389466] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:HDMI-A-2] to [CRTC:5]
>[    3.389681] snd_hda_intel 0000:00:1b.0: irq 60 for MSI/MSI-X
>[    3.402838] ALSA sound/pci/hda/patch_realtek.c:434 SKU: Nid=0x1d sku_cfg=0x40189d2d
>[    3.402840] ALSA sound/pci/hda/patch_realtek.c:436 SKU: port_connectivity=0x1
>[    3.402841] ALSA sound/pci/hda/patch_realtek.c:437 SKU: enable_pcbeep=0x1
>[    3.402842] ALSA sound/pci/hda/patch_realtek.c:438 SKU: check_sum=0x00000008
>[    3.402844] ALSA sound/pci/hda/patch_realtek.c:439 SKU: customization=0x0000009d
>[    3.402845] ALSA sound/pci/hda/patch_realtek.c:440 SKU: external_amp=0x5
>[    3.402846] ALSA sound/pci/hda/patch_realtek.c:441 SKU: platform_type=0x1
>[    3.402847] ALSA sound/pci/hda/patch_realtek.c:442 SKU: swap=0x0
>[    3.402849] ALSA sound/pci/hda/patch_realtek.c:443 SKU: override=0x1
>[    3.403272] ALSA sound/pci/hda/hda_auto_parser.c:393 autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
>[    3.403274] ALSA sound/pci/hda/hda_auto_parser.c:397    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>[    3.403276] ALSA sound/pci/hda/hda_auto_parser.c:401    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
>[    3.403277] ALSA sound/pci/hda/hda_auto_parser.c:402    mono: mono_out=0x0
>[    3.403278] ALSA sound/pci/hda/hda_auto_parser.c:406    inputs:
>[    3.403280] ALSA sound/pci/hda/hda_auto_parser.c:410      Mic=0x18
>[    3.403282] ALSA sound/pci/hda/hda_auto_parser.c:410      Internal Mic=0x12
>[    3.403284] ALSA sound/pci/hda/patch_realtek.c:504 realtek: No valid SSID, checking pincfg 0x40189d2d for NID 0x1d
>[    3.403286] ALSA sound/pci/hda/patch_realtek.c:520 realtek: Enabling init ASM_ID=0x9d2d CODEC_ID=10ec0282
>[    3.418064] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
>[    3.421624] usb 1-2: new high-speed USB device number 3 using xhci_hcd
>[    3.454141] dracut: Checking ext4: /dev/sda4
>[    3.457711] dracut: issuing e2fsck -a  /dev/sda4
>[    3.468005] dracut: /dev/sda4: clean, 484340/3276800 files, 11311047/13107200 blocks
>[    3.471972] dracut: Remounting /dev/sda4 with -o ro
>[    3.482552] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
>[    3.489989] dracut: Mounted root filesystem /dev/sda4
>[    3.509482] device-mapper: uevent: version 1.0.3
>[    3.513127] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
>[    3.604908] usb 1-2: New USB device found, idVendor=0b95, idProduct=772b
>[    3.608334] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[    3.611740] usb 1-2: Product: AX88772B
>[    3.615121] usb 1-2: Manufacturer: ASIX Elec. Corp.
>[    3.618491] usb 1-2: SerialNumber: 00002A
>[    3.926047] asix 1-2:1.0 eth0: register 'asix' at usb-0000:00:14.0-2, ASIX AX88772B USB 2.0 Ethernet, 00:24:8c:02:86:42
>[    3.941456] dracut: Switching root
>[    3.989961] systemd[1]: systemd 204 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
>[    4.007367] systemd[1]: Failed to insert module 'ipv6'
>[    4.011005] systemd[1]: Set hostname to <x-bdw08>.
>[    4.015635] random: systemd urandom read with 103 bits of entropy available
>[    4.031645] usb 2-4: new SuperSpeed USB device number 2 using xhci_hcd
>[    4.038732] LVM: Logical Volume autoactivation enabled.
>[    4.042216] LVM: Activation generator successfully completed.
>[    4.056954] usb 2-4: New USB device found, idVendor=0bda, idProduct=0306
>[    4.061964] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[    4.066772] usb 2-4: Product: USB3.0-CRW
>[    4.071634] usb 2-4: Manufacturer: Generic
>[    4.076507] usb 2-4: SerialNumber: 20090703819900000
>[    4.086404] usb-storage 2-4:1.0: USB Mass Storage device detected
>[    4.089777] scsi3 : usb-storage 2-4:1.0
>[    4.095692] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
>[    4.099082] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
>[    4.102450] systemd[1]: Starting Syslog Socket.
>[    4.109059] systemd[1]: Listening on Syslog Socket.
>[    4.112273] systemd[1]: Starting Replay Read-Ahead Data...
>[    4.119120] systemd[1]: Starting Collect Read-Ahead Data...
>[    4.123882] systemd-readahead[2704]: Bumped block_nr parameter of 8:0 to 20480. This is a temporary hack and should be removed one day.
>[    4.128771] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
>[    4.130260] systemd-readahead[2705]: Failed to create fanotify object: Function not implemented
>[    4.138532] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
>[    4.141401] systemd[1]: Starting Delayed Shutdown Socket.
>[    4.147106] systemd[1]: Listening on Delayed Shutdown Socket.
>[    4.149894] systemd[1]: Starting udev Kernel Socket.
>[    4.155449] systemd[1]: Listening on udev Kernel Socket.
>[    4.158159] systemd[1]: Starting udev Control Socket.
>[    4.163722] systemd[1]: Listening on udev Control Socket.
>[    4.166362] systemd[1]: Starting Encrypted Volumes.
>[    4.171891] systemd[1]: Reached target Encrypted Volumes.
>[    4.174489] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
>[    4.180228] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
>[    4.182826] systemd[1]: Starting Journal Socket.
>[    4.188046] systemd[1]: Listening on Journal Socket.
>[    4.190583] random: nonblocking pool is initialized
>[    4.193167] systemd[1]: Starting Create static device nodes in /dev...
>[    4.198881] systemd[1]: Mounting POSIX Message Queue File System...
>[    4.204541] systemd[1]: Starting udev Coldplug all Devices...
>[    4.210250] systemd[1]: Mounting Debug File System...
>[    4.216130] systemd[1]: Starting Journal Service...
>[    4.226078] systemd[1]: Started Journal Service.
>[    4.229095] systemd[1]: Mounting Huge Pages File System...
>[    4.236553] systemd[1]: Starting LVM2 metadata daemon socket.
>[    4.242241] systemd[1]: Listening on LVM2 metadata daemon socket.
>[    4.244824] systemd[1]: Starting Device-mapper event daemon FIFOs.
>[    4.249861] systemd[1]: Listening on Device-mapper event daemon FIFOs.
>[    4.252580] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
>[    4.258826] systemd[1]: Expecting device dev-disk-by\x2duuid-1a1b79a3\x2d6d33\x2d48d2\x2da27e\x2d1b5805d88291.device...
>[    4.264015] systemd[1]: Mounting Temporary Directory...
>[    4.271314] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway.
>[    4.274355] systemd[1]: Expecting device dev-disk-by\x2duuid-ABCD\x2d535B.device...
>[    4.280862] systemd[1]: Expecting device dev-disk-by\x2duuid-0a7e090c\x2dd2b9\x2d498e\x2dbc0d\x2d05c33717cb8c.device...
>[    4.287001] systemd[1]: Expecting device dev-disk-by\x2duuid-d79f918f\x2d693d\x2d4480\x2d91cf\x2d6840792221db.device...
>[    4.295955] systemd[1]: Started Replay Read-Ahead Data.
>[    4.298877] systemd[1]: systemd-readahead-collect.service: main process exited, code=exited, status=1/FAILURE
>[    4.304946] systemd[1]: Started Collect Read-Ahead Data.
>[    4.311121] systemd[1]: Started Create static device nodes in /dev.
>[    4.317034] systemd[1]: Mounted POSIX Message Queue File System.
>[    4.323253] systemd[1]: Mounted Debug File System.
>[    4.328960] systemd[1]: Mounted Huge Pages File System.
>[    4.334742] systemd[1]: Mounted Temporary Directory.
>[    4.337631] systemd[1]: Starting udev Kernel Device Manager...
>[    4.343926] systemd[1]: Starting Load legacy module configuration...
>[    4.346159] systemd-udevd[3357]: starting version 204
>[    4.353791] systemd[1]: Started File System Check on Root Device.
>[    4.356839] systemd[1]: Starting Remount Root and Kernel File Systems...
>[    4.364504] systemd[1]: Started Load Kernel Modules.
>[    4.369525] systemd[1]: Mounting FUSE Control File System...
>[    4.371183] EXT4-fs (sda4): re-mounted. Opts: (null)
>[    4.380868] systemd[1]: Mounted Configuration File System.
>[    4.385508] systemd[1]: Started Set Up Additional Binary Formats.
>[    4.389211] systemd[1]: Starting Setup Virtual Console...
>[    4.399743] systemd[1]: Starting Apply Kernel Variables...
>[    4.415737] systemd[1]: Started udev Kernel Device Manager.
>[    4.427058] systemd[1]: Mounted FUSE Control File System.
>[    4.432453] systemd[1]: Starting LVM2 metadata daemon...
>[    4.442900] [drm:intel_crtc_set_config] [CRTC:5] [FB:34] #connectors=1 (x y) (0 0)
>[    4.442907] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[    4.442911] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:HDMI-A-2] to [CRTC:5]
>[    4.458838] systemd[1]: Started udev Coldplug all Devices.
>[    4.471854] systemd[1]: Started Load legacy module configuration.
>[    4.482727] systemd[1]: Started Remount Root and Kernel File Systems.
>[    4.493730] systemd[1]: Started Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
>[    4.505048] systemd[1]: Started Setup Virtual Console.
>[    4.515795] systemd[1]: Started Apply Kernel Variables.
>[    4.526434] systemd[1]: Started LVM2 metadata daemon.
>[    4.531482] systemd[1]: Starting Local File Systems (Pre).
>[    4.541371] systemd[1]: Reached target Local File Systems (Pre).
>[    4.546199] systemd[1]: Starting Configure read-only root support...
>[    4.557466] systemd[1]: Started Import network configuration from initramfs.
>[    4.562538] systemd[1]: Starting Show Plymouth Boot Screen...
>[    4.581665] systemd[1]: Starting Sound Card.
>[    4.588041] systemd[1]: Reached target Sound Card.
>[    4.594339] systemd-udevd[3441]: renamed network interface eth0 to enp0s20u2
>[    4.646879] Adding 3964924k swap on /dev/sda3.  Priority:-1 extents:1 across:3964924k SS
>[    4.696420] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
>[    4.703028] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
>[    4.715687] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
>[    4.727544] audit: type=1305 audit(979429806.681:2): audit_pid=3810 old=0 auid=4294967295 ses=4294967295 res=1
>[    5.096286] scsi 3:0:0:0: Direct-Access     Generic- SD/MMC           1.00 PQ: 0 ANSI: 0 CCS
>[    5.099847] scsi 3:0:0:1: Direct-Access     Generic- SD/MMC/MS/MSPRO  1.00 PQ: 0 ANSI: 0 CCS
>[    5.102301] sd 3:0:0:0: Attached scsi generic sg1 type 0
>[    5.105811] sd 3:0:0:1: Attached scsi generic sg2 type 0
>[    5.108118] sd 3:0:0:0: [sdb] Attached SCSI removable disk
>[    5.121474] sd 3:0:0:1: [sdc] Attached SCSI removable disk
>[    7.542632] asix 1-2:1.0 enp0s20u2: link up, 100Mbps, full-duplex, lpa 0xC5E1
>[    8.808532] [drm:intel_crtc_set_config] [CRTC:5] [FB:34] #connectors=1 (x y) (0 0)
>[    8.808538] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[    8.808542] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:HDMI-A-2] to [CRTC:5]
>[   26.542397] [drm:i915_gem_open] 
>[   26.542437] [drm:intel_crtc_cursor_set] cursor off
>[   26.542443] [drm:intel_crtc_set_config] [CRTC:5] [FB:34] #connectors=1 (x y) (0 0)
>[   26.542448] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[   26.542452] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:HDMI-A-2] to [CRTC:5]
>[   26.542456] [drm:intel_crtc_cursor_set] cursor off
>[   26.542458] [drm:intel_crtc_set_config] [CRTC:8] [NOFB]
>[   26.542461] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[   26.542464] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:HDMI-A-2] to [CRTC:5]
>[   26.542467] [drm:intel_crtc_cursor_set] cursor off
>[   26.542469] [drm:intel_crtc_set_config] [CRTC:11] [NOFB]
>[   26.542472] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0
>[   26.542475] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:HDMI-A-2] to [CRTC:5]
>[   26.542489] [drm:i915_gem_open] 
>[   26.542815] [drm:i915_gem_open] 
>[   26.542835] [drm:i915_gem_open] 
>[   26.547084] BUG: unable to handle kernel NULL pointer dereference at           (null)
>[   26.547161] IP: [<          (null)>]           (null)
>[   26.547205] PGD 9f119067 PUD 27e8067 PMD 0 
>[   26.547249] Oops: 0010 [#1] SMP 
>[   26.547282] Modules linked in: dm_mod snd_hda_codec_realtek snd_hda_codec_generic snd_hda_codec_hdmi iTCO_wdt iTCO_vendor_support pcspkr i2c_i801 snd_hda_intel snd_hda_codec lpc_ich snd_hwdep mfd_core snd_pcm snd_timer snd soundcore battery ppdev parport_pc parport ac acpi_cpufreq i915 video button drm_kms_helper drm
>[   26.547585] CPU: 0 PID: 4162 Comm: gem_render_copy Tainted: G        W    3.14.0_drm-intel-next-queued_e5c03c_20140504+ #2290
>[   26.547670] task: ffff8800aac82e20 ti: ffff88009f090000 task.ti: ffff88009f090000
>[   26.547726] RIP: 0010:[<0000000000000000>]  [<          (null)>]           (null)
>[   26.547787] RSP: 0018:ffff88009f091c40  EFLAGS: 00010286
>[   26.547829] RAX: 0000000000000000 RBX: ffff880002d21e50 RCX: 0000000000000000
>[   26.547883] RDX: 0000000000000030 RSI: 0000000000000004 RDI: ffff880002d21e50
>[   26.547936] RBP: ffff880002d20000 R08: 0000000000014400 R09: ffff8800aad68278
>[   26.547990] R10: ffff8800aad68278 R11: 0000000000000000 R12: ffff8801498c8a00
>[   26.548044] R13: 0000000000000000 R14: ffff880002d21e50 R15: ffff88014508e2a0
>[   26.548099] FS:  00007f9d3da508c0(0000) GS:ffff88014f400000(0000) knlGS:0000000000000000
>[   26.548159] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
>[   26.548203] CR2: 0000000000000000 CR3: 000000009f0c5000 CR4: 00000000003407f0
>[   26.548257] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
>[   26.548311] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
>[   26.548363] Stack:
>[   26.548381]  ffffffffa0089c10 ffff8801498c8a00 ffffffffa008c609 0000000000000000
>[   26.548449]  ffffffffa00793f2 ffff880002d21e50 0000000000000030 0000002000ccc000
>[   26.548516]  ffff8800aad68180 0000000000000000 ffff880002d21e50 ffff880145525e80
>[   26.548583] Call Trace:
>[   26.548627]  [<ffffffffa0089c10>] ? gen6_add_request+0x13/0x88 [i915]
>[   26.548691]  [<ffffffffa008c609>] ? intel_ring_flush_all_caches+0x1c/0x29 [i915]
>[   26.548761]  [<ffffffffa00793f2>] ? __i915_add_request+0x1db/0x1fa [i915]
>[   26.548826]  [<ffffffffa0075116>] ? i915_gem_do_execbuffer.isra.16+0x102e/0x1196 [i915]
>[   26.548890]  [<ffffffff812dee53>] ? __sg_page_iter_next+0x2b/0x58
>[   26.548948]  [<ffffffffa007574c>] ? i915_gem_execbuffer2+0x177/0x1fb [i915]
>[   26.549008]  [<ffffffffa0002f22>] ? drm_ioctl+0x25c/0x3ad [drm]
>[   26.549065]  [<ffffffffa00755d5>] ? i915_gem_execbuffer+0x357/0x357 [i915]
>[   26.549120]  [<ffffffff812dab46>] ? scnprintf+0x39/0x3e
>[   26.549165]  [<ffffffff810ed7c3>] ? do_vfs_ioctl+0x3ec/0x435
>[   26.549213]  [<ffffffff810fb30a>] ? simple_attr_release+0xd/0x11
>[   26.549264]  [<ffffffff81049499>] ? task_work_run+0x78/0x87
>[   26.549310]  [<ffffffff810ed855>] ? SyS_ioctl+0x49/0x78
>[   26.549356]  [<ffffffff81092b18>] ? __audit_syscall_exit+0x209/0x225
>[   26.549409]  [<ffffffff817218a2>] ? system_call_fastpath+0x16/0x1b
>[   26.549456] Code:  Bad RIP value.
>[   26.549491] RIP  [<          (null)>]           (null)
>[   26.549536]  RSP <ffff88009f091c40>
>[   26.549564] CR2: 0000000000000000
>[   26.549593] ---[ end trace bf9b5f7ec92455f5 ]---

Actions: View

Attachments on bug 78248: 98410

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.