Attachment 99375 Details for Bug 77701 – dmesg_insmod_i915

dmesg_insmod_i915

dmesg_insmod_i915.log (text/plain), 21.18 KB, created by EvaWang on 2014-05-20 04:02:06 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: EvaWang

Created: 2014-05-20 04:02:06 UTC

Size: 21.18 KB

patch

obsolete

>[  187.667646] [drm:i915_dump_device_info] i915 device info: gen=7, pciid=0x0a16 flags=is_mobile,need_gfx_hws,is_haswell,has_fbc,has_hotplug,has_llc,has_ddi,has_fpga_dbg,
>[  187.667985] [drm:intel_detect_pch] Found LynxPoint LP PCH
>[  187.668338] [drm] Memory usable by graphics device = 2048M
>[  187.668340] [drm:i915_gem_gtt_init] GMADR size = 256M
>[  187.668341] [drm:i915_gem_gtt_init] GTT stolen size = 32M
>[  187.668342] [drm:i915_gem_gtt_init] ppgtt mode: 1
>[  187.668344] checking generic (d0000000 7e9000) vs hw (d0000000 10000000)
>[  187.668345] fb: switching to inteldrmfb from EFI VGA
>[  187.668403] Console: switching to colour dummy device 80x25
>[  187.705677] [drm:intel_opregion_setup] graphic opregion physical addr: 0xccf77018
>[  187.705688] [drm:intel_opregion_setup] Public ACPI methods supported
>[  187.705689] [drm:intel_opregion_setup] SWSCI supported
>[  187.711648] [drm:swsci_setup] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483
>[  187.711652] [drm:intel_opregion_setup] ASLE supported
>[  187.711732] i915 0000:00:02.0: irq 60 for MSI/MSI-X
>[  187.711743] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
>[  187.711744] [drm] Driver supports precise vblank timestamp query.
>[  187.711746] [drm:init_vbt_defaults] Set default to SSC at 120000 kHz
>[  187.711749] [drm:intel_parse_bios] Using VBT from OpRegion: $VBT HASWELL        d
>[  187.711752] [drm:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0
>[  187.711754] [drm:parse_general_definitions] crt_ddc_bus_pin: 2
>[  187.711758] [drm:parse_lfp_panel_data] Found panel mode in BIOS VBT tables:
>[  187.711761] [drm:drm_mode_debug_printmodeline] Modeline 0:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
>[  187.711763] [drm:parse_lfp_panel_data] VBT initial LVDS value 300
>[  187.711766] [drm:parse_lfp_backlight] VBT backlight PWM modulation frequency 220 Hz, active high, min brightness 3, level 255
>[  187.711768] [drm:parse_sdvo_panel_data] Found SDVO panel mode in BIOS VBT tables:
>[  187.711771] [drm:drm_mode_debug_printmodeline] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
>[  187.711773] [drm:parse_sdvo_device_mapping] No SDVO device info is found in VBT
>[  187.711777] [drm:parse_mipi] No MIPI BDB found
>[  187.711779] [drm:parse_ddi_port] Port A VBT info: DP:1 HDMI:0 DVI:0 EDP:1 CRT:0
>[  187.711781] [drm:parse_ddi_port] VBT HDMI level shift for port A: 0
>[  187.711783] [drm:parse_ddi_port] Port B VBT info: DP:0 HDMI:1 DVI:1 EDP:0 CRT:0
>[  187.711785] [drm:parse_ddi_port] VBT HDMI level shift for port B: 6
>[  187.711786] [drm:parse_ddi_port] Port C VBT info: DP:1 HDMI:1 DVI:1 EDP:0 CRT:0
>[  187.711788] [drm:parse_ddi_port] VBT HDMI level shift for port C: 6
>[  187.711789] [drm:parse_ddi_port] Port D VBT info: DP:1 HDMI:1 DVI:1 EDP:0 CRT:0
>[  187.711791] [drm:parse_ddi_port] VBT HDMI level shift for port D: 6
>[  187.711805] [drm:intel_dsm_pci_probe] no _DSM method for intel device
>[  187.711813] [drm:i915_gem_init_stolen] found 33554432 bytes of stolen memory at cda00000
>[  187.711816] [drm:intel_display_power_get] enabling always-on
>[  187.711818] [drm:intel_display_power_get] enabling display
>[  187.711822] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
>[  187.711864] [drm:intel_print_wm_latency] Primary WM0 latency 20 (2.0 usec)
>[  187.711866] [drm:intel_print_wm_latency] Primary WM1 latency 4 (2.0 usec)
>[  187.711867] [drm:intel_print_wm_latency] Primary WM2 latency 36 (18.0 usec)
>[  187.711869] [drm:intel_print_wm_latency] Primary WM3 latency 90 (45.0 usec)
>[  187.711871] [drm:intel_print_wm_latency] Primary WM4 latency 160 (80.0 usec)
>[  187.711873] [drm:intel_print_wm_latency] Sprite WM0 latency 20 (2.0 usec)
>[  187.711874] [drm:intel_print_wm_latency] Sprite WM1 latency 4 (2.0 usec)
>[  187.711876] [drm:intel_print_wm_latency] Sprite WM2 latency 36 (18.0 usec)
>[  187.711877] [drm:intel_print_wm_latency] Sprite WM3 latency 90 (45.0 usec)
>[  187.711879] [drm:intel_print_wm_latency] Sprite WM4 latency 160 (80.0 usec)
>[  187.711881] [drm:intel_print_wm_latency] Cursor WM0 latency 20 (2.0 usec)
>[  187.711882] [drm:intel_print_wm_latency] Cursor WM1 latency 4 (2.0 usec)
>[  187.711884] [drm:intel_print_wm_latency] Cursor WM2 latency 36 (18.0 usec)
>[  187.711886] [drm:intel_print_wm_latency] Cursor WM3 latency 90 (45.0 usec)
>[  187.711887] [drm:intel_print_wm_latency] Cursor WM4 latency 160 (80.0 usec)
>[  187.711890] [drm:intel_modeset_init] 3 display pipes available.
>[  187.711910] [drm:intel_ddi_pll_init] CDCLK running at 450000KHz
>[  187.712216] [drm:intel_dp_init_connector] Adding eDP connector on port A
>[  187.712278] [drm:intel_dp_init_panel_power_sequencer] cur t1_t3 2000 t8 0 t9 2000 t10 500 t11_t12 6000
>[  187.712280] [drm:intel_dp_init_panel_power_sequencer] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000
>[  187.712282] [drm:intel_dp_init_panel_power_sequencer] panel power up delay 200, power down delay 50, power cycle delay 600
>[  187.712284] [drm:intel_dp_init_panel_power_sequencer] backlight on delay 1, off delay 200
>[  187.712286] [drm:intel_dp_aux_init] registering DPDDC-A bus for card0-eDP-1
>[  187.712340] [drm:_edp_panel_vdd_on] Turning eDP VDD on
>[  187.712347] [drm:_edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f
>[  187.712653] [drm:intel_dp_get_dpcd] DPCD: 11 0a 82 01 00 00 01 00 02 00 00 00 00 0b 00
>[  187.712833] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06
>[  187.733090] [drm:drm_edid_to_eld] ELD: no CEA Extension found
>[  187.733128] [drm:intel_panel_setup_backlight] backlight initialized, enabled, brightness 852/852, sysfs interface registered
>[  187.742722] [drm:intel_modeset_readout_hw_state] [CRTC:5] hw state readout: enabled
>[  187.742733] [drm:intel_modeset_readout_hw_state] [CRTC:8] hw state readout: disabled
>[  187.742739] [drm:intel_modeset_readout_hw_state] [CRTC:11] hw state readout: disabled
>[  187.742745] [drm:intel_ddi_get_crtc_pll] Pipe A connected to port A using clock 0x60000000
>[  187.742756] [drm:intel_modeset_readout_hw_state] [ENCODER:13:TMDS-13] hw state readout: enabled, pipe A
>[  187.742761] [drm:intel_modeset_readout_hw_state] [ENCODER:21:TMDS-21] hw state readout: disabled, pipe A
>[  187.742767] [drm:intel_modeset_readout_hw_state] [CONNECTOR:14:eDP-1] hw state readout: enabled
>[  187.742772] [drm:intel_modeset_readout_hw_state] [CONNECTOR:22:HDMI-A-1] hw state readout: disabled
>[  187.742779] [drm:intel_dump_pipe_config] [CRTC:5][setup_hw_state] config for pipe A
>[  187.742782] [drm:intel_dump_pipe_config] cpu_transcoder: D
>[  187.742785] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 0
>[  187.742790] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  187.742794] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 4860034, gmch_n: 8388608, link_m: 270001, link_n: 524288, tu: 64
>[  187.742797] [drm:intel_dump_pipe_config] requested mode:
>[  187.742803] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 1920 0 0 0 1080 0 0 0 0x0 0x0
>[  187.742806] [drm:intel_dump_pipe_config] adjusted mode:
>[  187.742811] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0xa
>[  187.742816] [drm:intel_dump_crtc_timings] crtc timings: 139046 1920 1968 2000 2080 1080 1083 1088 1111, type: 0x0 flags: 0xa
>[  187.742819] [drm:intel_dump_pipe_config] port clock: 270000
>[  187.742822] [drm:intel_dump_pipe_config] pipe src size: 1920x1080
>[  187.742826] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[  187.742829] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[  187.742832] [drm:intel_dump_pipe_config] ips: 0
>[  187.742835] [drm:intel_dump_pipe_config] double wide: 0
>[  187.742839] [drm:intel_dump_pipe_config] [CRTC:8][setup_hw_state] config for pipe B
>[  187.742842] [drm:intel_dump_pipe_config] cpu_transcoder: B
>[  187.742845] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
>[  187.742849] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  187.742853] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  187.742855] [drm:intel_dump_pipe_config] requested mode:
>[  187.742860] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[  187.742862] [drm:intel_dump_pipe_config] adjusted mode:
>[  187.742867] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[  187.742871] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[  187.742874] [drm:intel_dump_pipe_config] port clock: 0
>[  187.742877] [drm:intel_dump_pipe_config] pipe src size: 0x0
>[  187.742880] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[  187.742883] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[  187.742886] [drm:intel_dump_pipe_config] ips: 0
>[  187.742889] [drm:intel_dump_pipe_config] double wide: 0
>[  187.742893] [drm:intel_dump_pipe_config] [CRTC:11][setup_hw_state] config for pipe C
>[  187.742896] [drm:intel_dump_pipe_config] cpu_transcoder: C
>[  187.742899] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
>[  187.742902] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  187.742906] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  187.742908] [drm:intel_dump_pipe_config] requested mode:
>[  187.742913] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[  187.742916] [drm:intel_dump_pipe_config] adjusted mode:
>[  187.742920] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[  187.742924] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[  187.742927] [drm:intel_dump_pipe_config] port clock: 0
>[  187.742930] [drm:intel_dump_pipe_config] pipe src size: 0x0
>[  187.742933] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[  187.742936] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[  187.742939] [drm:intel_dump_pipe_config] ips: 0
>[  187.742941] [drm:intel_dump_pipe_config] double wide: 0
>[  187.742953] [drm:intel_connector_check_state] [CONNECTOR:14:eDP-1]
>[  187.742958] [drm:check_encoder_state] [ENCODER:13:TMDS-13]
>[  187.742962] [drm:check_encoder_state] [ENCODER:21:TMDS-21]
>[  187.742966] [drm:check_crtc_state] [CRTC:5]
>[  187.742978] [drm:check_crtc_state] [CRTC:8]
>[  187.742983] [drm:check_crtc_state] [CRTC:11]
>[  187.742993] [drm:ironlake_get_plane_config] pipe/plane 0/0 with fb: size=1920x1080@32, offset=0, pitch 7680, size 0x7e9000
>[  187.742998] [drm:i915_gem_object_create_stolen_for_preallocated] creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=7e9000
>[  187.743004] [drm:i915_pages_create_for_stolen] offset=0x0, size=8294400
>[  187.743013] [drm:intel_alloc_plane_obj] plane fb obj ffff8800c0206a80
>[  187.743018] [drm:i915_gem_setup_global_gtt] reserving preallocated space: 0 + 7e9000
>[  187.743022] [drm:i915_gem_setup_global_gtt] clearing unused GTT space: [7e9000, 7ffff000]
>[  187.748658] [drm:gen6_ppgtt_init] Allocated pde space (2M) at GTT entry: 800
>[  187.748666] [drm:i915_gem_context_init] HW context support initialized
>[  187.748684] [drm:init_status_page] render ring hws offset: 0x00a00000
>[  187.750665] [drm:init_pipe_control] render ring pipe control offset: 0x00a21000
>[  187.750682] [drm:init_status_page] bsd ring hws offset: 0x00a22000
>[  187.750864] [drm:init_status_page] blitter ring hws offset: 0x00a43000
>[  187.751028] [drm:init_status_page] video enhancement ring hws offset: 0x00a64000
>[  187.751446] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:14:eDP-1]
>[  187.751451] [drm:intel_dp_detect] [CONNECTOR:14:eDP-1]
>[  187.751468] [drm:drm_edid_to_eld] ELD: no CEA Extension found
>[  187.751475] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:14:eDP-1] probed modes :
>[  187.751481] [drm:drm_mode_debug_printmodeline] Modeline 15:"1920x1080" 60 138700 1920 1968 2000 2080 1080 1083 1088 1111 0x48 0xa
>[  187.751484] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:22:HDMI-A-1]
>[  187.751488] [drm:intel_hdmi_detect] [CONNECTOR:22:HDMI-A-1]
>[  187.751694] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
>[  187.751702] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
>[  187.751708] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:22:HDMI-A-1] disconnected
>[  187.751712] [drm:drm_setup_crtcs] 
>[  187.751716] [drm:drm_enable_connectors] connector 14 enabled? yes
>[  187.751719] [drm:drm_enable_connectors] connector 22 enabled? no
>[  187.751723] [drm:intel_fb_initial_config] looking for cmdline mode on connector 14
>[  187.751726] [drm:intel_fb_initial_config] looking for preferred mode on connector 14
>[  187.751730] [drm:intel_fb_initial_config] connector eDP-1 on crtc 5: 1920x1080
>[  187.751733] [drm:intel_fb_initial_config] connector 22 not enabled, skipping
>[  187.751736] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 5
>[  187.751741] [drm:intelfb_create] no BIOS fb, allocating a new one
>[  187.751745] [drm:i915_gem_object_create_stolen] creating stolen object: size=7e9000
>[  187.751750] [drm:i915_pages_create_for_stolen] offset=0x7e9000, size=8294400
>[  187.756108] [drm:intelfb_create] allocated 1920x1080 fb: 0x00a85000, bo ffff8800c0207c80
>[  187.756249] fbcon: inteldrmfb (fb0) is primary device
>[  187.756362] [drm:intel_crtc_cursor_set] cursor off
>[  187.756364] [drm:intel_crtc_set_config] [CRTC:5] [FB:25] #connectors=1 (x y) (0 0)
>[  187.756365] [drm:intel_set_config_compute_mode_changes] modes are different, full mode set
>[  187.756367] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[  187.756369] [drm:drm_mode_debug_printmodeline] Modeline 24:"1920x1080" 60 138700 1920 1968 2000 2080 1080 1083 1088 1111 0x48 0xa
>[  187.756370] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=1, fb_changed=1
>[  187.756372] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[  187.756374] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
>[  187.756375] [drm:connected_sink_compute_bpp] [CONNECTOR:14:eDP-1] checking for sink bpp constrains
>[  187.756376] [drm:connected_sink_compute_bpp] clamping display bpp (was 24) to EDID reported max of 18
>[  187.756378] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 0a pixel clock 138700KHz
>[  187.756380] [drm:intel_dp_compute_config] DP link bw 06 lane count 2 clock 162000 bpp 18
>[  187.756380] [drm:intel_dp_compute_config] DP link bw required 249660 available 259200
>[  187.756382] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 18, dithering: 1
>[  187.756383] [drm:intel_dump_pipe_config] [CRTC:5][modeset] config for pipe A
>[  187.756383] [drm:intel_dump_pipe_config] cpu_transcoder: D
>[  187.756384] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1
>[  187.756385] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  187.756386] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 4039930, gmch_n: 4194304, link_m: 224440, link_n: 262144, tu: 64
>[  187.756387] [drm:intel_dump_pipe_config] requested mode:
>[  187.756388] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138700 1920 1968 2000 2080 1080 1083 1088 1111 0x48 0xa
>[  187.756389] [drm:intel_dump_pipe_config] adjusted mode:
>[  187.756390] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138700 1920 1968 2000 2080 1080 1083 1088 1111 0x48 0xa
>[  187.756392] [drm:intel_dump_crtc_timings] crtc timings: 138700 1920 1968 2000 2080 1080 1083 1088 1111, type: 0x48 flags: 0xa
>[  187.756392] [drm:intel_dump_pipe_config] port clock: 162000
>[  187.756393] [drm:intel_dump_pipe_config] pipe src size: 1920x1080
>[  187.756394] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[  187.756395] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[  187.756396] [drm:intel_dump_pipe_config] ips: 1
>[  187.756396] [drm:intel_dump_pipe_config] double wide: 0
>[  187.759616] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0
>[  187.759621] [drm:intel_edp_backlight_off] 
>[  187.771885] [drm:intel_edp_panel_off] Turn eDP power off
>[  187.960532] [drm:wait_panel_off] Wait for panel power off time
>[  187.960540] [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control abcd0000
>[  188.015470] [drm:wait_panel_status] Wait complete
>[  188.015480] [drm:intel_update_fbc] no output, disabling
>[  188.015490] [drm:intel_display_power_put] disabling display
>[  188.015494] [drm:hsw_set_power_well] Requesting to disable the power well
>[  188.015499] [drm:intel_ddi_put_crtc_pll] Disabling SPLL
>[  188.015535] [drm:ironlake_update_primary_plane] Writing base 00A85000 00000000 0 0 7680
>[  188.015543] [drm:intel_crtc_mode_set] [ENCODER:13:TMDS-13] set [MODE:0:1920x1080]
>[  188.015546] [drm:intel_ddi_mode_set] Preparing DDI mode on port A, pipe A
>[  188.015551] [drm:intel_edp_panel_on] Turn eDP power on
>[  188.015553] [drm:wait_panel_power_cycle] Wait for panel power cycle
>[  188.561303] [drm:wait_panel_status] mask b800000f value 00000000 status 08000001 control abcd0000
>[  188.605221] [drm:wait_panel_status] Wait complete
>[  188.605228] [drm:wait_panel_on] Wait for panel power on
>[  188.605234] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd0003
>[  188.814105] [drm:wait_panel_status] Wait complete
>[  188.814113] [drm:_edp_panel_vdd_on] Turning eDP VDD on
>[  188.814123] [drm:_edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b
>[  188.815302] [drm:intel_dp_set_signal_levels] Using signal levels 00000000
>[  188.815802] [drm:intel_dp_set_signal_levels] Using signal levels 04000000
>[  188.816293] [drm:intel_dp_start_link_train] clock recovery OK
>[  188.817094] [drm:intel_dp_complete_link_train] Channel EQ done. DP Training successful
>[  188.817516] [drm:intel_edp_backlight_on] 
>[  188.817522] [drm:intel_panel_enable_backlight] pipe A
>[  188.817529] [drm:intel_panel_actually_set_backlight] set backlight PWM = 852
>[  188.817538] [drm:intel_edp_psr_match_conditions] PSR disable by flag
>[  188.850971] [drm:intel_update_fbc] framebuffer not tiled or fenced, disabling compression
>[  188.850986] [drm:intel_connector_check_state] [CONNECTOR:14:eDP-1]
>[  188.850992] [drm:check_encoder_state] [ENCODER:13:TMDS-13]
>[  188.850996] [drm:check_encoder_state] [ENCODER:21:TMDS-21]
>[  188.851000] [drm:check_crtc_state] [CRTC:5]
>[  188.851014] [drm:check_crtc_state] [CRTC:8]
>[  188.851017] [drm:check_crtc_state] [CRTC:11]
>[  188.851024] [drm:intel_crtc_cursor_set] cursor off
>[  188.851027] [drm:intel_crtc_set_config] [CRTC:8] [NOFB]
>[  188.851033] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[  188.851038] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[  188.851042] [drm:intel_crtc_cursor_set] cursor off
>[  188.851044] [drm:intel_crtc_set_config] [CRTC:11] [NOFB]
>[  188.851048] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0
>[  188.851051] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[  188.851162] Console: switching to colour frame buffer device 240x67
>[  188.851180] [drm:intel_crtc_set_config] [CRTC:5] [FB:25] #connectors=1 (x y) (0 0)
>[  188.851185] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[  188.851189] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[  188.873492] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
>[  188.873498] i915 0000:00:02.0: registered panic notifier
>[  188.874127] ACPI Exception: AE_NOT_FOUND, Evaluating _DOD (20140214/video-1251)
>[  188.874132] ACPI: Video Device [PEGP] (multi-head: no  rom: yes  post: no)
>[  188.874203] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:3c/LNXVIDEO:00/input/input11
>[  188.891225] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
>[  188.891815] [drm:asle_set_backlight] bclp = 0x80000005
>[  188.891823] [drm:asle_set_backlight] updating opregion backlight 5/255
>[  188.891831] [drm:intel_panel_actually_set_backlight] set backlight PWM = 15
>[  188.892043] [drm:asle_set_backlight] bclp = 0x800000ff
>[  188.892048] [drm:asle_set_backlight] updating opregion backlight 255/255
>[  188.892051] [drm:intel_panel_actually_set_backlight] set backlight PWM = 765
>[  188.892159] acpi device:60: registered as cooling_device4
>[  188.892286] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input12
>[  188.892444] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
>[  189.615818] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
>[  189.615839] [drm:gen6_enable_rps] Overclocking supported. Max: 1000MHz, Overclock max: 1000MHz
>[  190.715055] [drm:edp_panel_vdd_off_sync] Turning eDP VDD off
>[  190.715070] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007

Actions: View

Attachments on bug 77701: 97653 | 97895 | 98218 | 99375 | 99396 | 99602

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.