Summary: | glitches and unable to use monitors | ||
---|---|---|---|
Product: | Mesa | Reporter: | lukasw41 |
Component: | Mesa core | Assignee: | mesa-dev |
Status: | RESOLVED NOTOURBUG | QA Contact: | mesa-dev |
Severity: | major | ||
Priority: | medium | ||
Version: | 18.0 | ||
Hardware: | x86-64 (AMD64) | ||
OS: | Linux (All) | ||
Whiteboard: | |||
i915 platform: | i915 features: | ||
Attachments: |
screenshot of the error/glitch
xorg log after restart /var/log/Xorg.0.log dmesg_errors |
Please provide your xorg log, preferably after that error happens. Also, you're likely going to be getter off using the GT 630 as the primary than a Radeon 3000. Note that this issue has nothing to do with mesa. Created attachment 139642 [details]
xorg log after restart /var/log/Xorg.0.log
Thanks for the response. I added the Xorg log found at /var/log/Xorg.0.log If I use my GT 630 as primary (as selected in the bios) I can't use the output of my motherboard any more. I am not sure where the problems come from. I am just assuming it is mesa, because that seems reasonable and my system started having problems after I updated mesa to 18.0.4 With the update, there were also xf86-video-* (or similar, don't remember) updates. Perhabs they cause the problem Something very odd is happening... nouveau loads, and then [ 6.447] (II) config/udev: removing GPU device /sys/devices/pci0000:00/0000:00:02.0/0000:02:00.0/drm/card1 /dev/dri/card1 [ 6.447] xf86: remove device 1 /sys/devices/pci0000:00/0000:00:02.0/0000:02:00.0/drm/card1 [ 6.466] (II) NOUVEAU(G0): NVLeaveVT is called. followed immediately by [ 6.494] (II) config/udev: Adding drm device (/dev/dri/card1) [ 6.494] (II) xfree86: Adding drm device (/dev/dri/card1) [ 6.494] (II) LoadModule: "modesetting" after which the modesetting driver appears to have trouble setting modes. Do you see anything in dmesg about it perchance? You're using the just-released xorg 1.20, I suspect going back to 1.19 would fix things up too. Created attachment 139643 [details]
dmesg_errors
dmesg errors
ok, thanks for the hint. I will try this. I attached the dmesg log. The last lines show errors and were highlighted red. But I don't understand it. thank you very much for your help Ilia Mirkin I'll open a ticket at xorg and see if they can help me |
Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.
Created attachment 139639 [details] screenshot of the error/glitch After upgrading to Mesa 18.0.4 I have several issues with my graphics. Using: OS: ArchLabs x86_64 Kernel: 4.16.9-1-ARCH GPU: Radeon 3000 GPU: GeForce GT 630 I have one monitor plugged into my motherboard and two monitors into my gpu. On start-up xrandr was setting my setup correctly. "xrandr --output VGA-0 --primary --mode 1280x1024 --pos 0x0 --rotate normal --output DVI-I-1-1 --mode 1280x1024 --pos 3200x0 --rotate normal --output HDMI-1-1 --mode 1920x1080 --pos 1280x0 --rotate normal" Now the script fails with "xrandr: Configure crtc 2 failed". And only the monitor plugged into my motherboard is working. I was once able to use a second monitor, but it was glitching like hell. After a restart I wasn't able to achieve the same. Now my mouse if flickering. see screenshot in attachments