Bug 75239

Do you see anything on the the eDP panel at all?

(In reply to comment #1)
> Do you see anything on the the eDP panel at all?

Green screen flash by.

This is working for me on a recent nightly. Can you please retest?

bwidawsk@momoa ~/intel-gfx/intel-gpu-tools (master)$ sudo ./tests/kms_plane --run-subtest plane-position-covered-pipe-B-plane-1
IGT-Version: 1.6-g9019fed (x86_64) (Linux: 3.15.0-rc7-BEN+ x86_64)
Testing connector eDP-1 using pipe B plane 1
Testing connector DP-1 using pipe B plane 1
Subtest plane-position-covered-pipe-B-plane-1: SUCCESS

This was run on BDW btw. Please confirm if it's still an issue for both BYT and BDW. Thanks.

Test on latest -nightly kernel. It works well on BDW.
subcase plane-position-covered-pipe-A-plane-1 still fails on BYT.
# ./kms_plane --run-subtest plane-position-covered-pipe-A-plane-1
IGT-Version: 1.6-g1451df1 (x86_64) (Linux: 3.15.0-rc7_drm-intel-nightly_0a37b5_20140604+ x86_64)
Testing connector eDP-1 using pipe A plane 1
Test assertion failure function test_plane_position_with_output, file kms_plane.c:174:
Last errno: 0, Success
Failed assertion: igt_crc_equal(&test.reference_crc, &crc)
Subtest plane-position-covered-pipe-A-plane-1: FAIL

Created attachment 100436 [details]
dmesg(BYT)

This bug is able to reproduce on HSW too.
Kernel:
drm-intel-nightly(969b3c5a312e849fa7a3dc0937a6acf34cdd7e25)
Output:
./kms_plane --run-subtest plane-position-covered-pipe-C-plane-1
IGT-Version: 1.6-g18d2130 (x86_64) (Linux: 3.15.0-rc8_drm-intel-nightly_969b3c_20140609+ x86_64)
Testing connector VGA-1 using pipe C plane 1
Test assertion failure function test_plane_position_with_output, file kms_plane.c:174:
Last errno: 0, Success
Failed assertion: igt_crc_equal(&test.reference_crc, &crc)
Subtest plane-position-covered-pipe-C-plane-1: FAIL

Test failed on latest -next-queued(2789339044fb6dfbee0c8cd77e26438b80e333ee) on BSW

[root@x-bsw01 tests]# ./kms_plane --run-subtest plane-position-covered-pipe-B-plane-3
IGT-Version: 1.7-g0818875 (x86_64) (Linux: 3.17.0-rc2_drm-intel-next-queued_278933_20140905+ x86_64)
Testing connector eDP-1 using pipe B plane 3
Test assertion failure function test_plane_position_with_output, file kms_plane.c:197:
Failed assertion: igt_crc_equal(&test.reference_crc, &crc)
Subtest plane-position-covered-pipe-B-plane-3: FAIL

Test on latest -nightly kernel, It's sporadical fail. Fail rate:2/3.
output:
IGT-Version: 1.8-gb7d80d1 (x86_64) (Linux: 3.17.0_drm-intel-nightly_ea4bec_20141010+ x86_64)
Testing connector eDP-1 using pipe A plane 1
Test assertion failure function test_plane_position_with_output, file kms_plane.c:197:
Failed assertion: igt_crc_equal(&test.reference_crc, &crc)
Subtest plane-position-covered-pipe-A-plane-1: FAIL (5.024s)
root@x-byt06:/GFX/Test/Intel_gpu_tools/intel-gpu-tools/tests# ./kms_plane --run-subtest plane-position-covered-pipe-A-plane-1
IGT-Version: 1.8-gb7d80d1 (x86_64) (Linux: 3.17.0_drm-intel-nightly_ea4bec_20141010+ x86_64)
Testing connector eDP-1 using pipe A plane 1
Test assertion failure function test_plane_position_with_output, file kms_plane.c:197:
Failed assertion: igt_crc_equal(&test.reference_crc, &crc)
Subtest plane-position-covered-pipe-A-plane-1: FAIL (4.180s)
root@x-byt06:/GFX/Test/Intel_gpu_tools/intel-gpu-tools/tests# ./kms_plane --run-subtest plane-position-covered-pipe-A-plane-1
IGT-Version: 1.8-gb7d80d1 (x86_64) (Linux: 3.17.0_drm-intel-nightly_ea4bec_20141010+ x86_64)
Testing connector eDP-1 using pipe A plane 1
Subtest plane-position-covered-pipe-A-plane-1: SUCCESS (4.179s)

I'm running it reliably here on both BSW and BDW with latest nightly.
Could you please retest?

Test on BYT and the latest -nightly kernel. I don't see the unstable fail.
run ./kms_plane, Following subcases fail(Bug 86763)
Test assertion failure function test_plane_position_with_output, file kms_plane.c:197:
Failed assertion: igt_crc_equal(&test.reference_crc, &crc)
Subtest plane-position-covered-pipe-B-plane-2: FAIL (1.009s)
Testing connector DP-1 using pipe B plane 2
Test assertion failure function igt_pipe_crc_new, file igt_debugfs.c:387:
Failed assertion: pipe_crc->crc_fd != -1
Last errno: 16, Device or resource busy
Subtest plane-position-hole-pipe-B-plane-2: FAIL (0.000s)
Testing connector DP-1 using pipe B plane 2
Test assertion failure function igt_pipe_crc_new, file igt_debugfs.c:387:
Failed assertion: pipe_crc->crc_fd != -1
Last errno: 16, Device or resource busy
Subtest plane-panning-top-left-pipe-B-plane-2: FAIL (0.000s)
Testing connector DP-1 using pipe B plane 2
Test assertion failure function igt_pipe_crc_new, file igt_debugfs.c:387:
Failed assertion: pipe_crc->crc_fd != -1
Last errno: 16, Device or resource busy
Subtest plane-panning-bottom-right-pipe-B-plane-2: FAIL (0.000s)

These seem to pass now on BYT.

Tested it on the latest nightly kernel and igt.
This issue does not exists on BSW, but it still exists on BYT.

output:
-------------------
root@x-byt06:/GFX/Test/Intel_gpu_tools/intel-gpu-tools/tests# for i in `seq 1 10`; do ./kms_plane --run-subtest plane-position-covered-pipe-B-plane-1 ; done
IGT-Version: 1.10-ge8457ed (x86_64) (Linux: 4.0.0-rc6_drm-intel-nightly_333cf6_20150403+ x86_64)
Testing connector eDP-1 using pipe B plane 1
Test assertion failure function igt_assert_crc_equal, file igt_debugfs.c:207:
Failed assertion: a->crc[i] == b->crc[i]
error: 0x1b6b6a != 0x289cb3
Stack trace:
  #0 [__igt_fail_assert+0xfc]
  #1 [igt_assert_crc_equal+0x82]
  #2 [test_plane_position.constprop.9+0x2dc]
  #3 [run_tests_for_pipe_plane.constprop.6+0x20c]
  #4 [__real_main407+0x55]
  #5 [main+0x21]
  #6 [__libc_start_main+0xf5]
  #7 [_start+0x29]
  #8 [<unknown>+0x29]
Subtest plane-position-covered-pipe-B-plane-1 failed.
**** DEBUG ****
Test requirement passed: !(pipe >= data->display.n_pipes)
Test requirement passed: !(plane >= data->display.pipes[pipe].n_planes)
Testing connector eDP-1 using pipe B plane 1
display: eDP-1: set_pipe(B)
igt_create_fb_with_bo_size(width=1920, height=1080, format=0x34325258 [bpp=32], tiling=0x0, size=0
igt_create_fb_with_bo_size(handle=1, pitch=7680)
display: B.0: plane_set_fb(44)
display: commit {
display:     eDP-1: Selecting pipe B
display:     eDP-1: SetCrtc pipe B, fb 44, panning (0, 0), mode 1920x1080
display: }
display: B.0: plane_set_fb(0)
display: commit {
display:     eDP-1: Selecting pipe B
display:     eDP-1: SetCrtc pipe B, disabling
display: }
CRC for a (0.00,1.00,0.00) fb: 001b6b6a 001f30f8 00454281 00454281 00203dd9
display: eDP-1: set_pipe(B)
igt_create_fb_with_bo_size(width=1920, height=1080, format=0x34325258 [bpp=32], tiling=0x0, size=0
igt_create_fb_with_bo_size(handle=1, pitch=7680)
display: B.0: plane_set_fb(44)
igt_create_fb_with_bo_size(width=64, height=64, format=0x34325258 [bpp=32], tiling=0x0, size=0
igt_create_fb_with_bo_size(handle=2, pitch=256)
display: B.1: plane_set_fb(46)
display: B.1: plane_set_position(100,100)
display: commit {
display:     eDP-1: Selecting pipe B
display:     eDP-1: SetCrtc pipe B, fb 44, panning (0, 0), mode 1920x1080
display:     eDP-1: SetPlane B.1, fb 46, position (100, 100)
display: }
Test assertion failure function igt_assert_crc_equal, file igt_debugfs.c:207:
Failed assertion: a->crc[i] == b->crc[i]
error: 0x1b6b6a != 0x289cb3
****  END  ****
Subtest plane-position-covered-pipe-B-plane-1: FAIL (3.566s)

Let's dupe it to the plane failure bug.

*** This bug has been marked as a duplicate of bug 84361 ***