Admitedly, this is probably not a bug and a situation of a newbie. However, I have really no clue where to begin with this. I am running Debian Lenny (2.6.26) on a Toshiba Satellite A110. It has a Radeon Xpress 200M video card with a cracked LCD. I attach a Sharp monitor to the VGA port and it works well. I've installed what I think is a "minimal" xserver system, including xterm. After installing the Debian package, I ran X -configure then copied the file into /etc/X11/xorg.conf. When I boot the machine and login I can startx and I get a small console box, about 1/6th of the screen in the top left, and the rest of the screen is the black and white hatch pattern with the X mouse in the middle. Next I Ctrl-Alt-F1 and then Ctrl-c to kill the server. The log file is attached. Unfortunately, next time I starx, I get a screen full of fine black and white vertical lines, with bolder (1/4 inch) either white or black lines in between (usually 3 or 4 of them). My guess is the sync rates are getting screwed up somehow, but I have no idea how to figure that out. Nothing shows up in the syslog to indicate any problems, and if I create new Xorg.*.log files in /var/log for each attempt, they are identical. I can't find anything on the web about this because the problem seems far to general or vague. About the only thing I did find is a suggestion to lspci -vvnn to attach for more info...so that is included, along with my xorg.conf file. Anyways, any suggestions on how to proceed would be GREATLY appreciated. One last thing, ultimately I will only need to access the machine via VNC, so I'm wondering if I even need to go through all of this hassle??? Cheers, Christopher ATTACHMENT: ================================================================ /etc/x11/xorg.conf Section "ServerLayout" Option "AllowMouseOpenFail" "True" Identifier "X.org Configured" Screen 0 "Screen0" 0 0 # InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "Files" RgbPath "/etc/X11/rgb" ModulePath "/usr/lib/xorg/modules" FontPath "/usr/share/fonts/X11/misc" FontPath "/usr/share/fonts/X11/cyrillic" FontPath "/usr/share/fonts/X11/100dpi/:unscaled" FontPath "/usr/share/fonts/X11/75dpi/:unscaled" FontPath "/usr/share/fonts/X11/Type1" FontPath "/usr/share/fonts/X11/100dpi" FontPath "/usr/share/fonts/X11/75dpi" FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" EndSection Section "Module" Load "GLcore" Load "dbe" Load "record" Load "xtrap" Load "extmod" Load "glx" Load "dri" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/input/mice" Option "ZAxisMapping" "4 5 6 7" EndSection Section "Monitor" #DisplaySize 340 270 # mm Identifier "Monitor0" VendorName "SHP" ModelName "LL-T17A4-B" ### Comment all HorizSync and VertRefresh values to use DDC: HorizSync 24.0 - 82.0 VertRefresh 55.0 - 77.0 Option "DPMS" EndSection Section "Device" ### Available Driver options are:- ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz" ### [arg]: arg optional #Option "NoAccel" # [<bool>] #Option "SWcursor" # [<bool>] #Option "Dac6Bit" # [<bool>] #Option "Dac8Bit" # [<bool>] #Option "BusType" # [<str>] #Option "CPPIOMode" # [<bool>] #Option "CPusecTimeout" # <i> #Option "AGPMode" # <i> #Option "AGPFastWrite" # [<bool>] #Option "AGPSize" # <i> #Option "GARTSize" # <i> #Option "RingSize" # <i> #Option "BufferSize" # <i> #Option "EnableDepthMoves" # [<bool>] #Option "EnablePageFlip" # [<bool>] #Option "NoBackBuffer" # [<bool>] #Option "DMAForXv" # [<bool>] #Option "FBTexPercent" # <i> #Option "DepthBits" # <i> #Option "PCIAPERSize" # <i> #Option "AccelDFS" # [<bool>] #Option "DDCMode" # [<bool>] #Option "IgnoreEDID" # [<bool>] #Option "DisplayPriority" # [<str>] #Option "PanelSize" # [<str>] #Option "ForceMinDotClock" # <freq> #Option "ColorTiling" # [<bool>] #Option "VideoKey" # <i> #Option "RageTheatreCrystal" # <i> #Option "RageTheatreTunerPort" # <i> #Option "RageTheatreCompositePort" # <i> #Option "RageTheatreSVideoPort" # <i> #Option "TunerType" # <i> #Option "RageTheatreMicrocPath" # <str> #Option "RageTheatreMicrocType" # <str> #Option "ScalerWidth" # <i> #Option "RenderAccel" # [<bool>] #Option "SubPixelOrder" # [<str>] #Option "ShowCache" # [<bool>] #Option "DynamicClocks" # [<bool>] #Option "VGAAccess" # [<bool>] #Option "ReverseDDC" # [<bool>] #Option "LVDSProbePLL" # [<bool>] #Option "AccelMethod" # <str> #Option "DRI" # [<bool>] #Option "ConnectorTable" # <str> #Option "DefaultConnectorTable" # [<bool>] #Option "DefaultTMDSPLL" # [<bool>] #Option "TVDACLoadDetect" # [<bool>] #Option "ForceTVOut" # [<bool>] #Option "TVStandard" # <str> #Option "IgnoreLidStatus" # [<bool>] #Option "DefaultTVDACAdj" # [<bool>] #Option "Int10" # [<bool>] Identifier "Card0" Driver "radeon" VendorName "ATI Technologies Inc" BoardName "RC410 [Radeon Xpress 200M]" BusID "PCI:1:5:0" EndSection Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" SubSection "Display" Viewport 0 0 Depth 1 EndSubSection SubSection "Display" Viewport 0 0 Depth 4 EndSubSection SubSection "Display" Viewport 0 0 Depth 8 EndSubSection SubSection "Display" Viewport 0 0 Depth 15 EndSubSection SubSection "Display" Viewport 0 0 Depth 16 EndSubSection SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection ATTACHMENT: ================================================================ lspci -vvnn 00:00.0 Host bridge [0600]: ATI Technologies Inc Device [1002:5a31] (rev 01) Subsystem: Toshiba America Info Systems Device [1179:ff00] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 64 Kernel modules: ati-agp 00:01.0 PCI bridge [0604]: ATI Technologies Inc RS480 PCI Bridge [1002:5a3f] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 I/O behind bridge: 00009000-00009fff Memory behind bridge: d0000000-d00fffff Prefetchable memory behind bridge: d8000000-dfffffff Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [b0] Subsystem: Toshiba America Info Systems Device [1179:ff00] Kernel modules: shpchp 00:06.0 PCI bridge [0604]: ATI Technologies Inc RS480 PCI Bridge [1002:5a38] (prog-if 00 [Normal decode]) Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=02, subordinate=07, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [50] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Express (v1) Root Port (Slot-), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag+ RBE- FLReset- DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #247, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <64ns, L1 <1us ClockPM- Suprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train+ SlotClk+ DLActive- BWMgmt- ABWMgmt- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable- Address: fee0100c Data: 41c1 Capabilities: [b0] Subsystem: ATI Technologies Inc Device [1002:5a31] Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+ Capabilities: [100] Advanced Error Reporting <?> Capabilities: [140] Virtual Channel <?> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:12.0 IDE interface [0101]: ATI Technologies Inc IXP SB400 Serial ATA Controller [1002:4379] (rev 80) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: Toshiba America Info Systems Device [1179:ff00] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 22 Region 0: I/O ports at 8440 [size=8] Region 1: I/O ports at 8430 [size=4] Region 2: I/O ports at 8420 [size=8] Region 3: I/O ports at 8410 [size=4] Region 4: I/O ports at 8400 [size=16] Region 5: Memory at d0407000 (32-bit, non-prefetchable) [size=512] [virtual] Expansion ROM at 20000000 [disabled] [size=512K] Capabilities: [60] Power Management version 2 Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=2 PME- Capabilities: [50] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable- Address: 00000000 Data: 0000 Kernel driver in use: sata_sil Kernel modules: sata_sil 00:13.0 USB Controller [0c03]: ATI Technologies Inc IXP SB400 USB Host Controller [1002:4374] (rev 80) (prog-if 10 [OHCI]) Subsystem: Toshiba America Info Systems Device [1179:ff00] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 19 Region 0: Memory at d0404000 (32-bit, non-prefetchable) [size=4K] Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable- Address: 00000000 Data: 0000 Kernel driver in use: ohci_hcd Kernel modules: ohci-hcd 00:13.1 USB Controller [0c03]: ATI Technologies Inc IXP SB400 USB Host Controller [1002:4375] (rev 80) (prog-if 10 [OHCI]) Subsystem: Toshiba America Info Systems Device [1179:ff00] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 19 Region 0: Memory at d0405000 (32-bit, non-prefetchable) [size=4K] Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable- Address: 00000000 Data: 0000 Kernel driver in use: ohci_hcd Kernel modules: ohci-hcd 00:13.2 USB Controller [0c03]: ATI Technologies Inc IXP SB400 USB2 Host Controller [1002:4373] (rev 80) (prog-if 20 [EHCI]) Subsystem: Toshiba America Info Systems Device [1179:ff00] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 19 Region 0: Memory at d0406000 (32-bit, non-prefetchable) [size=4K] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Bridge: PM- B3+ Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable- Address: 00000000 Data: 0000 Kernel driver in use: ehci_hcd Kernel modules: ehci-hcd 00:14.0 SMBus [0c05]: ATI Technologies Inc IXP SB400 SMBus Controller [1002:4372] (rev 82) Subsystem: Toshiba America Info Systems Device [1179:ff00] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Region 0: I/O ports at 8450 [size=16] Region 1: Memory at d0407400 (32-bit, non-prefetchable) [size=1K] Kernel driver in use: piix4_smbus Kernel modules: i2c-piix4 00:14.1 IDE interface [0101]: ATI Technologies Inc IXP SB400 IDE Controller [1002:4376] (rev 80) (prog-if 88 [Master SecP]) Subsystem: Toshiba America Info Systems Device [1179:ff00] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at 8460 [size=16] Capabilities: [70] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable- Address: 00000000 Data: 0000 Kernel driver in use: ATIIXP_IDE Kernel modules: atiixp 00:14.2 Audio device [0403]: ATI Technologies Inc IXP SB4x0 High Definition Audio Controller [1002:437b] (rev 01) Subsystem: Toshiba America Info Systems Device [1179:ff00] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 32 bytes Interrupt: pin ? routed to IRQ 16 Region 0: Memory at d0400000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Address: 0000000000000000 Data: 0000 Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 00:14.3 ISA bridge [0601]: ATI Technologies Inc IXP SB400 PCI-ISA Bridge [1002:4377] (rev 80) Subsystem: Toshiba America Info Systems Device [1179:ff00] Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:14.4 PCI bridge [0604]: ATI Technologies Inc IXP SB400 PCI-PCI Bridge [1002:4371] (rev 80) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Bus: primary=00, secondary=09, subordinate=0e, sec-latency=64 I/O behind bridge: 0000a000-0000afff Memory behind bridge: d0100000-d01fffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- 01:05.0 VGA compatible controller [0300]: ATI Technologies Inc RC410 [Radeon Xpress 200M] [1002:5a62] (prog-if 00 [VGA controller]) Subsystem: Toshiba America Info Systems Device [1179:ff03] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 66 (2000ns min), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 11 Region 0: Memory at d8000000 (32-bit, prefetchable) [size=128M] Region 1: I/O ports at 9000 [size=256] Region 2: Memory at d0000000 (32-bit, non-prefetchable) [size=64K] [virtual] Expansion ROM at d0020000 [disabled] [size=128K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable- Address: 00000000 Data: 0000 Kernel modules: radeonfb 09:00.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. VT6306 Fire II IEEE 1394 OHCI Link Layer Controller [1106:3044] (rev c0) (prog-if 10 [OHCI]) Subsystem: Toshiba America Info Systems Device [1179:ff00] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (8000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at d0100000 (32-bit, non-prefetchable) [size=2K] Region 1: I/O ports at a400 [size=128] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: ohci1394 Kernel modules: ohci1394 09:04.0 CardBus bridge [0607]: ENE Technology Inc CB1410 Cardbus Controller [1524:1410] (rev 01) Subsystem: Toshiba America Info Systems Device [1179:ff00] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 168, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 17 Region 0: Memory at d0101000 (32-bit, non-prefetchable) [size=4K] Bus: primary=09, secondary=0a, subordinate=0d, sec-latency=176 Memory window 0: 20400000-207ff000 (prefetchable) Memory window 1: 24000000-27fff000 I/O window 0: 0000a800-0000a8ff I/O window 1: 0000ac00-0000acff BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001 Kernel driver in use: yenta_cardbus Kernel modules: yenta_socket 09:06.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10) Subsystem: Toshiba America Info Systems Device [1179:ff00] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (8000ns min, 16000ns max) Interrupt: pin A routed to IRQ 22 Region 0: I/O ports at a000 [size=256] Region 1: Memory at d0100800 (32-bit, non-prefetchable) [size=256] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: 8139too Kernel modules: 8139too, 8139cp
Created attachment 34272 [details] xorg.0.log Further to initial submission
It would probably be worth trying a newer version of the radeon driver...
Created attachment 34336 [details] xorg.conf ATI Radeon Xpress 200M & Sharp LL-T17A4-B
FIXED --- I think...(?) I recieved a reply to my bug report from Julien Cristau (jcristau@debian.org) suggesting using 7.3 version radeon driver. Wish I had one. I've check the Debian site and both unstable and experimental releases only offer 6.12 releases. Not gonna mess with them. I did try connecting an external mouse, and was actually able to hover over the reduce console area, and use "exit" to stop the server. However, when I restarted I got the same problem of vertical bars, BUT I was able to hover the mouse over the area where the reduce console was supposed to have appeared, and type "exit" to stop the server. This lead me to believe that the server believed the screen was there, even though it didn't appear so. I recalled seeing in the log file a bunch of modeline entries. I guessed that the information there might have been useful. After looking at the Xorg.conf man page I sort of figured out what is supposed to go where. I'm still not sure how the different "Modes" work in the "SubSection Display" entries work, but they don't seem to be harming anything. Anyways, attached is the xorg.conf file I came up with. At the very least, this bug is logged in case anyone else has a similar problem. In the meantime, I plead ignorance of youth :) ATTACHED IN-LINE: xorg.conf ATI Radeon Xpress 200M & Sharp LL-T17A4-B Section "ServerLayout" Option "AllowMouseOpenFail" "True" Identifier "X.org Configured" Screen 0 "Screen0" 0 0 InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "Files" RgbPath "/etc/X11/rgb" ModulePath "/usr/lib/xorg/modules" FontPath "/usr/share/fonts/X11/misc" FontPath "/usr/share/fonts/X11/cyrillic" FontPath "/usr/share/fonts/X11/100dpi/:unscaled" FontPath "/usr/share/fonts/X11/75dpi/:unscaled" FontPath "/usr/share/fonts/X11/Type1" FontPath "/usr/share/fonts/X11/100dpi" FontPath "/usr/share/fonts/X11/75dpi" FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" EndSection Section "Module" Load "GLcore" Load "dbe" Load "record" Load "xtrap" Load "extmod" Load "glx" Load "dri" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/input/mice" Option "ZAxisMapping" "4 5 6 7" EndSection Section "Monitor" Identifier "Monitor0" VendorName "SHP" ModelName "LL-T17A4-B" ### Comment all HorizSync and VertRefresh values to use DDC: HorizSync 24.0 - 82.0 VertRefresh 55.0 - 77.0 ### ### ### ADDED WITH CORRECTIONS FROM /var/log/xorg.0.log ### THE "DisplaySize" VALUES **MUST** BE GIVEN IN MILLIMETERS!!! ### IT WAS DETECTED BY X -configure BUT WAS ORIGINALLY COMMENTED OUT ### (II) RADEON(0): Max H-Image Size [cm]: horiz.: 34 vert.: 27 DisplaySize 340 270 # mm ### ### ### ADDED WITH CORRECTIONS FROM /var/log/xorg.0.log ### NOT SURE HOW THESE MAP TO THE "Modeline" ENTRIES BELOW ### IF I KNEW THAT, I COULD SPECIFY THE EXACT "Modes" IN THE "SubSection Display" ENTRIES ###(II) RADEON ###(0): Supported VESA Video Modes: ###(II) RADEON ###(0): 720x400@70Hz ###(II) RADEON ###(0): 640x480@60Hz ###(II) RADEON ###(0): 640x480@67Hz ###(II) RADEON ###(0): 640x480@72Hz ###(II) RADEON ###(0): 640x480@75Hz ###(II) RADEON ###(0): 800x600@56Hz ###(II) RADEON ###(0): 800x600@60Hz ###(II) RADEON ###(0): 800x600@72Hz ###(II) RADEON ###(0): 800x600@75Hz ###(II) RADEON ###(0): 832x624@75Hz ###(II) RADEON ###(0): 1024x768@60Hz ###(II) RADEON ###(0): 1024x768@70Hz ###(II) RADEON ###(0): 1024x768@75Hz ###(II) RADEON ###(0): 1280x1024@75Hz ###(II) RADEON ###(0): 1152x870@75Hz ### ### ### ADDED WITH CORRECTIONS FROM /var/log/xorg.0.log ### ### ### NOTICE THE DIFFERENCE BETWEEN THE "xorg.0.log" OUTPUT LINE, AND THE "Active" "Modeline" BELOW IT ###(II) RADEON(0): Printing DDC gathered Modelines: ###(II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) Modeline "1280x1024" 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync # (64.0 kHz) Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync # (37.9 kHz) Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync # (35.2 kHz) Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 -hsync -vsync # (37.5 kHz) Modeline "640x480" 31.50 640 664 704 832 480 489 491 520 -hsync -vsync # (37.9 kHz) Modeline "640x480" 30.24 640 704 768 864 480 483 486 525 -hsync -vsync # (35.0 kHz) Modeline "640x480" 25.20 640 656 752 800 480 490 492 525 -hsync -vsync # (31.5 kHz) Modeline "720x400" 28.32 720 738 846 900 400 412 414 449 -hsync +vsync # (31.5 kHz) Modeline "1280x1024" 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync # (80.0 kHz) Modeline "1024x768" 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync # (60.1 kHz) Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync # (56.5 kHz) Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync # (48.4 kHz) Modeline "832x624" 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync # (49.7 kHz) Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync # (46.9 kHz) Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync # (48.1 kHz) Modeline "1152x864" 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync # (67.5 kHz) Modeline "1280x1024" 109.00 1280 1368 1496 1712 1024 1027 1034 1063 -hsync +vsync # (63.7 kHz) Modeline "1280x960" 101.25 1280 1360 1488 1696 960 963 967 996 -hsync +vsync # (59.7 kHz) Modeline "1280x1024" 122.25 1280 1368 1496 1712 1024 1027 1034 1067 -hsync +vsync # (71.4 kHz) Modeline "1280x1024" 140.75 1280 1368 1504 1728 1024 1027 1034 1072 -hsync +vsync # (81.5 kHz) Modeline "1152x864" 104.00 1152 1224 1344 1536 864 867 871 905 -hsync +vsync # (67.7 kHz) Modeline "1024x768" 70.75 1024 1080 1184 1344 768 771 775 801 -hsync +vsync # (52.6 kHz) Option "DPMS" EndSection Section "Device" ### Available Driver options are:- ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz" ### [arg]: arg optional #Option "NoAccel" # [<bool>] #Option "SWcursor" # [<bool>] #Option "Dac6Bit" # [<bool>] #Option "Dac8Bit" # [<bool>] #Option "BusType" # [<str>] #Option "CPPIOMode" # [<bool>] #Option "CPusecTimeout" # <i> #Option "AGPMode" # <i> #Option "AGPFastWrite" # [<bool>] #Option "AGPSize" # <i> #Option "GARTSize" # <i> #Option "RingSize" # <i> #Option "BufferSize" # <i> #Option "EnableDepthMoves" # [<bool>] #Option "EnablePageFlip" # [<bool>] #Option "NoBackBuffer" # [<bool>] #Option "DMAForXv" # [<bool>] #Option "FBTexPercent" # <i> #Option "DepthBits" # <i> #Option "PCIAPERSize" # <i> #Option "AccelDFS" # [<bool>] #Option "DDCMode" # [<bool>] #Option "IgnoreEDID" # [<bool>] #Option "DisplayPriority" # [<str>] #Option "PanelSize" # [<str>] #Option "ForceMinDotClock" # <freq> #Option "ColorTiling" # [<bool>] #Option "VideoKey" # <i> #Option "RageTheatreCrystal" # <i> #Option "RageTheatreTunerPort" # <i> #Option "RageTheatreCompositePort" # <i> #Option "RageTheatreSVideoPort" # <i> #Option "TunerType" # <i> #Option "RageTheatreMicrocPath" # <str> #Option "RageTheatreMicrocType" # <str> #Option "ScalerWidth" # <i> #Option "RenderAccel" # [<bool>] #Option "SubPixelOrder" # [<str>] #Option "ShowCache" # [<bool>] #Option "DynamicClocks" # [<bool>] #Option "VGAAccess" # [<bool>] #Option "ReverseDDC" # [<bool>] #Option "LVDSProbePLL" # [<bool>] #Option "AccelMethod" # <str> #Option "DRI" # [<bool>] #Option "ConnectorTable" # <str> #Option "DefaultConnectorTable" # [<bool>] #Option "DefaultTMDSPLL" # [<bool>] #Option "TVDACLoadDetect" # [<bool>] #Option "ForceTVOut" # [<bool>] #Option "TVStandard" # <str> #Option "IgnoreLidStatus" # [<bool>] #Option "DefaultTVDACAdj" # [<bool>] #Option "Int10" # [<bool>] Identifier "Card0" Driver "radeon" VendorName "ATI Technologies Inc" BoardName "RC410 [Radeon Xpress 200M]" BusID "PCI:1:5:0" EndSection Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" ### ### ### ADDED "Modes" ENTRY FROM MODELINE VALUES ### ADDED "DefaultDepth" WITH MODELINE VALUES ### FROM: http://www.x.org/archive/X11R6.8.0/doc/xorg.conf.5.html#sect9 ### The first valid mode in this list will be the default display mode for startup. ### Switch to the next mode with Ctrl+Alt+Keypad-Plus, or previous with Ctrl+Alt+Keypad-Minus. ### If ... no modes, then the selection will be taken from the built-in VESA standard modes. ### DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 8 Modes "1280x1024" "1152x870" "1028x768" "832x624" "800x600" "720x400" "640x480 EndSubSection SubSection "Display" Viewport 0 0 Depth 16 Modes "1280x1024" "1152x870" "1028x768" "832x624" "800x600" "720x400" "640x480 EndSubSection SubSection "Display" Viewport 0 0 Depth 24 Modes "1280x1024" "1152x870" "1028x768" "832x624" "800x600" "720x400" "640x480 EndSubSection ### ### ### NOT SURE IF THESE DEPTHS WORK WITH ALL MODES ### COMMENTING THEM OUT SO I DON'T DAMAGE MY DISPLAY!!! ###SubSection "Display" ### Viewport 0 0 ### Depth 1 ### Modes "1280x1024" "1152x870" "1028x768" "832x624" "800x600" "720x400" "640x480 ###EndSubSection ###SubSection "Display" ### Viewport 0 0 ### Depth 4 ### Modes "1280x1024" "1152x870" "1028x768" "832x624" "800x600" "720x400" "640x480 ###EndSubSection ###SubSection "Display" ### Viewport 0 0 ### Depth 15 ### Modes "1280x1024" "1152x870" "1028x768" "832x624" "800x600" "720x400" "640x480 ###EndSubSection EndSection
Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.