Attachment 106352 Details for Bug 83915 – dmesg

dmesg

pm_rps.dmesg (text/plain), 78.62 KB, created by Guo Jinxian on 2014-09-16 06:47:54 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Guo Jinxian

Created: 2014-09-16 06:47:54 UTC

Size: 78.62 KB

patch

obsolete

>[    0.000000] Initializing cgroup subsys cpuset
>[    0.000000] Initializing cgroup subsys cpu
>[    0.000000] Initializing cgroup subsys cpuacct
>[    0.000000] Linux version 3.17.0-rc4_drm-intel-nightly_43df30_20140916+ (buildtopcommit@x-kernel) (gcc version 4.7.0 20120507 (Red Hat 4.7.0-5) (GCC) ) #2512 SMP Tue Sep 16 11:26:52 CST 2014
>[    0.000000] Command line: BOOT_IMAGE=kernels//nightly_parents/2014_09_16/drm-intel-nightly/43df30da20447e2856b2761215ff274886a9f931/bzImage_x86_64 root=/dev/sda2 drm.debug=0xe modules_path=kernels//nightly_parents/2014_09_16/drm-intel-nightly/43df30da20447e2856b2761215ff274886a9f931/modules_x86_64/lib/modules/3.17.0-rc4_drm-intel-nightly_43df30_20140916+ acpi_rsdp=0xac7e1014
>[    0.000000] e820: BIOS-provided physical RAM map:
>[    0.000000] BIOS-e820: [mem 0x0000000000000100-0x0000000000057fff] usable
>[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable
>[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000ac1dbfff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000ac1dc000-0x00000000ac743fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000ac744000-0x00000000ac796fff] ACPI NVS
>[    0.000000] BIOS-e820: [mem 0x00000000ac797000-0x00000000ac7e1fff] ACPI data
>[    0.000000] BIOS-e820: [mem 0x00000000ac7e2000-0x00000000ac7fefff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000014effffff] usable
>[    0.000000] NX (Execute Disable) protection: active
>[    0.000000] DMI not present or invalid.
>[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
>[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
>[    0.000000] AGP: No AGP bridge found
>[    0.000000] e820: last_pfn = 0x14f000 max_arch_pfn = 0x400000000
>[    0.000000] MTRR default type: write-back
>[    0.000000] MTRR fixed ranges enabled:
>[    0.000000]   00000-9FFFF write-back
>[    0.000000]   A0000-BFFFF uncachable
>[    0.000000]   C0000-FFFFF write-protect
>[    0.000000] MTRR variable ranges enabled:
>[    0.000000]   0 base 00C0000000 mask 7FC0000000 uncachable
>[    0.000000]   1 base 00B0000000 mask 7FF0000000 uncachable
>[    0.000000]   2 base 00AE000000 mask 7FFE000000 uncachable
>[    0.000000]   3 base 00AD800000 mask 7FFF800000 uncachable
>[    0.000000]   4 disabled
>[    0.000000]   5 disabled
>[    0.000000]   6 disabled
>[    0.000000]   7 disabled
>[    0.000000]   8 disabled
>[    0.000000]   9 disabled
>[    0.000000] x86 PAT enabled: cpu 0, old 0x7010600070106, new 0x7010600070106
>[    0.000000] e820: last_pfn = 0xac7ff max_arch_pfn = 0x400000000
>[    0.000000] Base memory trampoline at [ffff880000094000] 94000 size 24576
>[    0.000000] Using GB pages for direct mapping
>[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
>[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
>[    0.000000] BRK [0x033b9000, 0x033b9fff] PGTABLE
>[    0.000000] BRK [0x033ba000, 0x033bafff] PGTABLE
>[    0.000000] BRK [0x033bb000, 0x033bbfff] PGTABLE
>[    0.000000] init_memory_mapping: [mem 0x14ee00000-0x14effffff]
>[    0.000000]  [mem 0x14ee00000-0x14effffff] page 2M
>[    0.000000] BRK [0x033bc000, 0x033bcfff] PGTABLE
>[    0.000000] init_memory_mapping: [mem 0x14c000000-0x14edfffff]
>[    0.000000]  [mem 0x14c000000-0x14edfffff] page 2M
>[    0.000000] init_memory_mapping: [mem 0x100000000-0x14bffffff]
>[    0.000000]  [mem 0x100000000-0x13fffffff] page 1G
>[    0.000000]  [mem 0x140000000-0x14bffffff] page 2M
>[    0.000000] init_memory_mapping: [mem 0x00100000-0xac1dbfff]
>[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
>[    0.000000]  [mem 0x00200000-0x3fffffff] page 2M
>[    0.000000]  [mem 0x40000000-0x7fffffff] page 1G
>[    0.000000]  [mem 0x80000000-0xabffffff] page 2M
>[    0.000000]  [mem 0xac000000-0xac1dbfff] page 4k
>[    0.000000] init_memory_mapping: [mem 0xac7e2000-0xac7fefff]
>[    0.000000]  [mem 0xac7e2000-0xac7fefff] page 4k
>[    0.000000] BRK [0x033bd000, 0x033bdfff] PGTABLE
>[    0.000000] ACPI: Early table checksum verification disabled
>[    0.000000] ACPI: RSDP 0x00000000AC7E1014 000024 (v02 INTEL )
>[    0.000000] ACPI: XSDT 0x00000000AC7A9188 000114 (v01 INTEL  BDW-ULT  00000000      01000013)
>[    0.000000] ACPI: FACP 0x00000000AC7D7000 0000F4 (v05 INTEL  BDW-ULT  00000000 MSFT 0000005F)
>[    0.000000] ACPI: DSDT 0x00000000AC7B4000 01ED20 (v02 INTEL  BDW      00000000 INTL 20130927)
>[    0.000000] ACPI: FACS 0x00000000AC77E000 000040
>[    0.000000] ACPI: TCPA 0x00000000AC7DF000 000032 (v02 INTEL  EDK2     00000002      01000013)
>[    0.000000] ACPI: UEFI 0x00000000AC781000 000042 (v01 INTEL  EDK2     00000002      01000013)
>[    0.000000] ACPI: SSDT 0x00000000AC7DE000 0004B5 (v01 Intel_ Tpm2Tabl 00001000 INTL 20130927)
>[    0.000000] ACPI: SSDT 0x00000000AC7DD000 00004E (v01 MeSsdt MeSsdt   00003000 INTL 20130927)
>[    0.000000] ACPI: TPM2 0x00000000AC7DC000 000034 (v03                 00000000      00000000)
>[    0.000000] ACPI: SSDT 0x00000000AC7DB000 0005B1 (v01 Intel  PerfTune 00001000 INTL 20130927)
>[    0.000000] ACPI: DBGP 0x00000000AC7DA000 000034 (v01 INTEL           00000000 MSFT 0000005F)
>[    0.000000] ACPI: DBG2 0x00000000AC7D9000 000054 (v00 INTEL           00000000 MSFT 0000005F)
>[    0.000000] ACPI: LPIT 0x00000000AC7D8000 000094 (v01 INTEL  BDW-ULT  00000000 MSFT 0000005F)
>[    0.000000] ACPI: HPET 0x00000000AC7D6000 000038 (v01 INTEL  BDW-ULT  00000001 MSFT 0000005F)
>[    0.000000] ACPI: APIC 0x00000000AC7D5000 0000BC (v01 INTEL  BDW-ULT  00000001 MSFT 0000005F)
>[    0.000000] ACPI: MCFG 0x00000000AC7D4000 00003C (v01 INTEL  BDW-ULT  00000001 MSFT 0000005F)
>[    0.000000] ACPI: WDAT 0x00000000AC7D3000 000104 (v01 INTEL  BDW-ULT  00000000 MSFT 0000005F)
>[    0.000000] ACPI: SSDT 0x00000000AC7B3000 000250 (v01 INTEL  sensrhub 00000000 INTL 20130927)
>[    0.000000] ACPI: SSDT 0x00000000AC7AF000 00340B (v01 INTEL  PtidDevc 00001000 INTL 20130927)
>[    0.000000] ACPI: SSDT 0x00000000AC7AE000 000C7D (v01 INTEL  Ther_Rvp 00001000 INTL 20130927)
>[    0.000000] ACPI: SSDT 0x00000000AC7AD000 00017F (v01 INTEL  zpodd    00001000 INTL 20130927)
>[    0.000000] ACPI: BOOT 0x00000000AC7AC000 000028 (v01 INTEL  TIANO    00000002 MSFT 01000013)
>[    0.000000] ACPI: SSDT 0x00000000AC7AB000 00057D (v01 PmRef  Cpu0Ist  00003000 INTL 20130927)
>[    0.000000] ACPI: SSDT 0x00000000AC7AA000 000B74 (v01 CpuRef CpuSsdt  00003000 INTL 20130927)
>[    0.000000] ACPI: SSDT 0x00000000AC7A2000 006F08 (v01 SaSsdt SaSsdt   00003000 INTL 20130927)
>[    0.000000] ACPI: SSDT 0x00000000AC7E0000 0006A7 (v01 CppcTa CppcTabl 00001000 INTL 20130927)
>[    0.000000] ACPI: PCCT 0x00000000AC7A1000 00006E (v05 PcctTa PcctTabl 00001000 INTL 20130927)
>[    0.000000] ACPI: SSDT 0x00000000AC7A0000 000AC4 (v01 Cpc_Ta Cpc_Tabl 00001000 INTL 20130927)
>[    0.000000] ACPI: CSRT 0x00000000AC79F000 0000C4 (v01 INTL   BDW-ULT  00000001 INTL 20100528)
>[    0.000000] ACPI: DMAR 0x00000000AC79E000 0000F0 (v01 INTEL  BDW      00000001 INTL 00000001)
>[    0.000000] ACPI: FPDT 0x00000000AC79D000 000044 (v01 INTEL  EDK2     00000002      01000013)
>[    0.000000] ACPI: ASF! 0x00000000AC79C000 0000A0 (v32 INTEL   HCG     00000001 TFSM 000F4240)
>[    0.000000] ACPI: BGRT 0x00000000AC79B000 000038 (v01 INTEL  EDK2     00000002      01000013)
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] No NUMA configuration found
>[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000014effffff]
>[    0.000000] Initmem setup node 0 [mem 0x00000000-0x14effffff]
>[    0.000000]   NODE_DATA [mem 0x14effa000-0x14effdfff]
>[    0.000000]  [ffffea0000000000-ffffea00053fffff] PMD -> [ffff88014a600000-ffff88014e5fffff] on node 0
>[    0.000000] Zone ranges:
>[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
>[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
>[    0.000000]   Normal   [mem 0x100000000-0x14effffff]
>[    0.000000] Movable zone start for each node
>[    0.000000] Early memory node ranges
>[    0.000000]   node   0: [mem 0x00001000-0x00057fff]
>[    0.000000]   node   0: [mem 0x00059000-0x0009efff]
>[    0.000000]   node   0: [mem 0x00100000-0xac1dbfff]
>[    0.000000]   node   0: [mem 0xac7e2000-0xac7fefff]
>[    0.000000]   node   0: [mem 0x100000000-0x14effffff]
>[    0.000000] On node 0 totalpages: 1028502
>[    0.000000]   DMA zone: 64 pages used for memmap
>[    0.000000]   DMA zone: 26 pages reserved
>[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
>[    0.000000]   DMA32 zone: 10952 pages used for memmap
>[    0.000000]   DMA32 zone: 700921 pages, LIFO batch:31
>[    0.000000]   Normal zone: 5056 pages used for memmap
>[    0.000000]   Normal zone: 323584 pages, LIFO batch:31
>[    0.000000] Reserving Intel graphics stolen memory at 0xae000000-0xafffffff
>[    0.000000] ACPI: PM-Timer IO Port: 0x1808
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0xff] disabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0xff] disabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0xff] disabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0xff] disabled)
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
>[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>[    0.000000] ACPI: IRQ0 used by override.
>[    0.000000] ACPI: IRQ9 used by override.
>[    0.000000] Using ACPI (MADT) for SMP configuration information
>[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
>[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
>[    0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
>[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xac1dc000-0xac743fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xac744000-0xac796fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xac797000-0xac7e1fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xac7ff000-0xadffffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xae000000-0xafffffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xb0000000-0xe00f7fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xe00f8000-0xe00f8fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xe00f9000-0xfed1bfff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xff9fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xffa00000-0xffffffff]
>[    0.000000] e820: [mem 0xb0000000-0xe00f7fff] available for PCI devices
>[    0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
>[    0.000000] PERCPU: Embedded 27 pages/cpu @ffff88014ec00000 s78528 r8192 d23872 u262144
>[    0.000000] pcpu-alloc: s78528 r8192 d23872 u262144 alloc=1*2097152
>[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
>[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1012404
>[    0.000000] Policy zone: Normal
>[    0.000000] Kernel command line: BOOT_IMAGE=kernels//nightly_parents/2014_09_16/drm-intel-nightly/43df30da20447e2856b2761215ff274886a9f931/bzImage_x86_64 root=/dev/sda2 drm.debug=0xe modules_path=kernels//nightly_parents/2014_09_16/drm-intel-nightly/43df30da20447e2856b2761215ff274886a9f931/modules_x86_64/lib/modules/3.17.0-rc4_drm-intel-nightly_43df30_20140916+ acpi_rsdp=0xac7e1014
>[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
>[    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
>[    0.000000] AGP: Checking aperture...
>[    0.000000] AGP: No AGP bridge found
>[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
>[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>[    0.000000] Memory: 3944716K/4114008K available (7730K kernel code, 900K rwdata, 3944K rodata, 23332K init, 624K bss, 169292K reserved)
>[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
>[    0.000000] Hierarchical RCU implementation.
>[    0.000000] 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
>[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
>[    0.000000] NR_IRQS:4352 nr_irqs:760 0
>[    0.000000] Console: colour dummy device 80x25
>[    0.000000] console [tty0] enabled
>[    0.000000] hpet clockevent registered
>[    0.000000] tsc: Fast TSC calibration using PIT
>[    0.000000] tsc: Detected 2095.163 MHz processor
>[    0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4190.32 BogoMIPS (lpj=2095163)
>[    0.000007] pid_max: default: 32768 minimum: 301
>[    0.000014] ACPI: Core revision 20140724
>[    0.026963] ACPI: All ACPI Tables successfully acquired
>[    0.026992] Security Framework initialized
>[    0.027250] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
>[    0.028032] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
>[    0.028368] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
>[    0.028375] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
>[    0.028589] CPU: Physical Processor ID: 0
>[    0.028592] CPU: Processor Core ID: 0
>[    0.029688] mce: CPU supports 7 MCE banks
>[    0.029699] CPU0: Thermal LVT vector (0xfa) already installed
>[    0.029707] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
>[    0.029707] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
>[    0.030127] Freeing SMP alternatives memory: 32K (ffffffff83314000 - ffffffff8331c000)
>[    0.030784] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>[    0.040794] smpboot: CPU0: Intel(R) Core(TM) i3-5010U CPU @ 2.10GHz (fam: 06, model: 3d, stepping: 04)
>[    0.040804] TSC deadline timer enabled
>[    0.040828] Performance Events: PEBS fmt2+, generic architected perfmon, full-width counters, Intel PMU driver.
>[    0.040836] ... version:                3
>[    0.040838] ... bit width:              48
>[    0.040840] ... generic registers:      4
>[    0.040842] ... value mask:             0000ffffffffffff
>[    0.040844] ... max period:             0000ffffffffffff
>[    0.040846] ... fixed-purpose events:   3
>[    0.040848] ... event mask:             000000070000000f
>[    0.041131] x86: Booting SMP configuration:
>[    0.041134] .... node  #0, CPUs:      #1
>[    0.053384] CPU1: Thermal LVT vector (0xfa) already installed
>[    0.055533]  #2<7>[    0.067790] CPU2: Thermal LVT vector (0xfa) already installed
>[    0.082193]  #3
>[    0.082193] CPU3: Thermal LVT vector (0xfa) already installed
>[    0.084287] x86: Booted up 1 node, 4 CPUs
>[    0.084295] smpboot: Total of 4 processors activated (16761.30 BogoMIPS)
>[    0.087941] devtmpfs: initialized
>[    0.088258] PM: Registering ACPI NVS region [mem 0xac744000-0xac796fff] (339968 bytes)
>[    0.088459] xor: automatically using best checksumming function:
>[    0.097740]    avx       : 20556.000 MB/sec
>[    0.097779] RTC time: 18:32:41, date: 09/16/14
>[    0.097879] NET: Registered protocol family 16
>[    0.098102] cpuidle: using governor ladder
>[    0.098105] cpuidle: using governor menu
>[    0.098215] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
>[    0.098218] ACPI: bus type PCI registered
>[    0.098259] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
>[    0.098263] PCI: not using MMCONFIG
>[    0.098265] PCI: Using configuration type 1 for base access
>[    0.117788] raid6: sse2x1    6484 MB/s
>[    0.134817] raid6: sse2x2    7804 MB/s
>[    0.151841] raid6: sse2x4    9371 MB/s
>[    0.168874] raid6: avx2x1   12726 MB/s
>[    0.185905] raid6: avx2x2   14585 MB/s
>[    0.202934] raid6: avx2x4   16964 MB/s
>[    0.202936] raid6: using algorithm avx2x4 (16964 MB/s)
>[    0.202939] raid6: using avx2x2 recovery algorithm
>[    0.202980] ACPI: Added _OSI(Module Device)
>[    0.202983] ACPI: Added _OSI(Processor Device)
>[    0.202985] ACPI: Added _OSI(3.0 _SCP Extensions)
>[    0.202987] ACPI: Added _OSI(Processor Aggregator Device)
>[    0.213664] ACPI: Executed 18 blocks of module-level executable AML code
>[    0.247165] ACPI: Dynamic OEM Table Load:
>[    0.247183] ACPI: SSDT 0xFFFF8801493E1800 0004AE (v01 PmRef  Cpu0Cst  00003001 INTL 20130927)
>[    0.252313] ACPI: Dynamic OEM Table Load:
>[    0.252329] ACPI: SSDT 0xFFFF8801493E2000 000792 (v01 PmRef  ApIst    00003000 INTL 20130927)
>[    0.258186] ACPI: Dynamic OEM Table Load:
>[    0.258199] ACPI: SSDT 0xFFFF880148C1D600 000119 (v01 PmRef  ApCst    00003000 INTL 20130927)
>[    0.266183] ACPI: Interpreter enabled
>[    0.266192] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140724/hwxface-580)
>[    0.266202] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140724/hwxface-580)
>[    0.266223] ACPI: (supports S0 S3 S4 S5)
>[    0.266226] ACPI: Using IOAPIC for interrupt routing
>[    0.266249] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
>[    0.268317] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
>[    0.268542] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>[    0.269003] ACPI: Power Resource [PG00] (on)
>[    0.273413] ACPI: Power Resource [PG01] (on)
>[    0.278425] ACPI: Power Resource [PG02] (on)
>[    0.308033] acpi ABCD0000:00: ACPI dock station (docks/bays count: 1)
>[    0.309293] ACPI: Power Resource [FN00] (off)
>[    0.309370] ACPI: Power Resource [FN01] (off)
>[    0.309442] ACPI: Power Resource [FN02] (off)
>[    0.309512] ACPI: Power Resource [FN03] (off)
>[    0.309584] ACPI: Power Resource [FN04] (off)
>[    0.310587] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
>[    0.310595] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
>[    0.311398] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
>[    0.311934] PCI host bridge to bus 0000:00
>[    0.311938] pci_bus 0000:00: root bus resource [bus 00-fe]
>[    0.311941] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
>[    0.311944] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
>[    0.311947] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
>[    0.311951] pci_bus 0000:00: root bus resource [mem 0xb0000000-0xfeafffff]
>[    0.311961] pci 0000:00:00.0: [8086:1604] type 00 class 0x060000
>[    0.312188] pci 0000:00:02.0: [8086:1616] type 00 class 0x030000
>[    0.312201] pci 0000:00:02.0: reg 0x10: [mem 0xd0000000-0xd0ffffff 64bit]
>[    0.312208] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
>[    0.312215] pci 0000:00:02.0: reg 0x20: [io  0x3000-0x303f]
>[    0.312437] pci 0000:00:03.0: [8086:160c] type 00 class 0x040300
>[    0.312445] pci 0000:00:03.0: reg 0x10: [mem 0xd1030000-0xd1033fff 64bit]
>[    0.312680] pci 0000:00:14.0: [8086:9cb1] type 00 class 0x0c0330
>[    0.312698] pci 0000:00:14.0: reg 0x10: [mem 0xd1020000-0xd102ffff 64bit]
>[    0.312755] pci 0000:00:14.0: PME# supported from D3hot D3cold
>[    0.312929] pci 0000:00:14.0: System wakeup disabled by ACPI
>[    0.312975] pci 0000:00:16.0: [8086:9cba] type 00 class 0x078000
>[    0.312993] pci 0000:00:16.0: reg 0x10: [mem 0xd1035000-0xd103501f 64bit]
>[    0.313053] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
>[    0.313265] pci 0000:00:19.0: [8086:15a2] type 00 class 0x020000
>[    0.313281] pci 0000:00:19.0: reg 0x10: [mem 0xd1000000-0xd101ffff]
>[    0.313292] pci 0000:00:19.0: reg 0x14: [mem 0xd1038000-0xd1038fff]
>[    0.313300] pci 0000:00:19.0: reg 0x18: [io  0x3080-0x309f]
>[    0.313357] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
>[    0.313546] pci 0000:00:19.0: System wakeup disabled by ACPI
>[    0.313595] pci 0000:00:1f.0: [8086:9cc3] type 00 class 0x060100
>[    0.313900] pci 0000:00:1f.2: [8086:9c83] type 00 class 0x010601
>[    0.313915] pci 0000:00:1f.2: reg 0x10: [io  0x30a8-0x30af]
>[    0.313922] pci 0000:00:1f.2: reg 0x14: [io  0x30b4-0x30b7]
>[    0.313929] pci 0000:00:1f.2: reg 0x18: [io  0x30a0-0x30a7]
>[    0.313936] pci 0000:00:1f.2: reg 0x1c: [io  0x30b0-0x30b3]
>[    0.313944] pci 0000:00:1f.2: reg 0x20: [io  0x3060-0x307f]
>[    0.313951] pci 0000:00:1f.2: reg 0x24: [mem 0xd1037000-0xd10377ff]
>[    0.313986] pci 0000:00:1f.2: PME# supported from D3hot
>[    0.314185] pci 0000:00:1f.3: [8086:9ca2] type 00 class 0x0c0500
>[    0.314199] pci 0000:00:1f.3: reg 0x10: [mem 0xd1034000-0xd10340ff 64bit]
>[    0.314218] pci 0000:00:1f.3: reg 0x20: [io  0xefa0-0xefbf]
>[    0.314438] pci 0000:00:1f.6: [8086:9ca4] type 00 class 0x118000
>[    0.314465] pci 0000:00:1f.6: reg 0x10: [mem 0xd1036000-0xd1036fff 64bit]
>[    0.314738] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
>[    0.316845] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15), disabled.
>[    0.316899] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    0.316949] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15), disabled.
>[    0.316998] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15), disabled.
>[    0.317046] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *10 11 12 14 15), disabled.
>[    0.317094] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    0.317142] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    0.317190] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    0.317706] ACPI: Enabled 4 GPEs in block 00 to 7F
>[    0.317907] ACPI : EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62
>[    0.318014] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
>[    0.318018] vgaarb: loaded
>[    0.318020] vgaarb: bridge control possible 0000:00:02.0
>[    0.318100] SCSI subsystem initialized
>[    0.318148] libata version 3.00 loaded.
>[    0.318279] ACPI: bus type USB registered
>[    0.318315] usbcore: registered new interface driver usbfs
>[    0.318331] usbcore: registered new interface driver hub
>[    0.318359] usbcore: registered new device driver usb
>[    0.318401] pps_core: LinuxPPS API ver. 1 registered
>[    0.318403] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
>[    0.318412] PTP clock support registered
>[    0.318486] PCI: Using ACPI for IRQ routing
>[    0.324220] PCI: pci_cache_line_size set to 64 bytes
>[    0.324247] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
>[    0.324249] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
>[    0.324251] e820: reserve RAM buffer [mem 0xac1dc000-0xafffffff]
>[    0.324252] e820: reserve RAM buffer [mem 0xac7ff000-0xafffffff]
>[    0.324254] e820: reserve RAM buffer [mem 0x14f000000-0x14fffffff]
>[    0.324382] NetLabel: Initializing
>[    0.324384] NetLabel:  domain hash size = 128
>[    0.324386] NetLabel:  protocols = UNLABELED CIPSOv4
>[    0.324400] NetLabel:  unlabeled traffic allowed by default
>[    0.324517] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
>[    0.324524] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
>[    0.326558] Switched to clocksource hpet
>[    0.330023] pnp: PnP ACPI init
>[    0.330323] system 00:00: [io  0x06a4] has been reserved
>[    0.330328] system 00:00: [io  0x06a0] has been reserved
>[    0.330332] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.330511] system 00:01: [io  0x0680-0x069f] has been reserved
>[    0.330515] system 00:01: [io  0xffff] has been reserved
>[    0.330517] system 00:01: [io  0xffff] has been reserved
>[    0.330520] system 00:01: [io  0xffff] has been reserved
>[    0.330524] system 00:01: [io  0x1800-0x18fe] could not be reserved
>[    0.330527] system 00:01: [io  0x164e-0x164f] has been reserved
>[    0.330530] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.330583] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
>[    0.330620] system 00:03: [io  0x1854-0x1857] has been reserved
>[    0.330624] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
>[    0.330735] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
>[    0.330814] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
>[    0.331401] system 00:06: [mem 0xfe102000-0xfe102fff] has been reserved
>[    0.331406] system 00:06: [mem 0xfe104000-0xfe104fff] has been reserved
>[    0.331409] system 00:06: [mem 0xfe106000-0xfe106fff] has been reserved
>[    0.331412] system 00:06: [mem 0xfe10e000-0xfe10efff] has been reserved
>[    0.331415] system 00:06: [mem 0xfe112000-0xfe112fff] has been reserved
>[    0.331418] system 00:06: [mem 0xfe111000-0xfe111007] has been reserved
>[    0.331422] system 00:06: [mem 0xfe111014-0xfe111fff] has been reserved
>[    0.331425] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.332506] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
>[    0.332510] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
>[    0.332513] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
>[    0.332517] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
>[    0.332520] system 00:07: [mem 0xe0000000-0xefffffff] could not be reserved
>[    0.332523] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
>[    0.332527] system 00:07: [mem 0xfed90000-0xfed93fff] has been reserved
>[    0.332531] system 00:07: [mem 0xfed45000-0xfed8ffff] could not be reserved
>[    0.332534] system 00:07: [mem 0xff000000-0xffffffff] could not be reserved
>[    0.332538] system 00:07: [mem 0xfee00000-0xfeefffff] has been reserved
>[    0.332541] system 00:07: [mem 0xb0010000-0xb001ffff] has been reserved
>[    0.332544] system 00:07: [mem 0xb0000000-0xb000ffff] has been reserved
>[    0.332548] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.332790] system 00:08: [mem 0x00000000-0x0009cfff] could not be reserved
>[    0.332794] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
>[    0.332923] pnp: PnP ACPI: found 9 devices
>[    0.339562] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
>[    0.339573] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
>[    0.339575] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
>[    0.339578] pci_bus 0000:00: resource 7 [mem 0xb0000000-0xfeafffff]
>[    0.339609] NET: Registered protocol family 2
>[    0.339808] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
>[    0.339876] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
>[    0.339941] TCP: Hash tables configured (established 32768 bind 32768)
>[    0.339963] TCP: reno registered
>[    0.339973] UDP hash table entries: 2048 (order: 4, 65536 bytes)
>[    0.339988] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
>[    0.340041] NET: Registered protocol family 1
>[    0.340102] RPC: Registered named UNIX socket transport module.
>[    0.340105] RPC: Registered udp transport module.
>[    0.340107] RPC: Registered tcp transport module.
>[    0.340109] RPC: Registered tcp NFSv4.1 backchannel transport module.
>[    0.340119] pci 0000:00:02.0: Boot video device
>[    0.340205] pci 0000:00:14.0: can't derive routing for PCI INT A
>[    0.340208] pci 0000:00:14.0: PCI INT A: no GSI
>[    0.340287] pci 0000:00:14.0: can't derive routing for PCI INT A
>[    0.340304] PCI: CLS 0 bytes, default 64
>[    0.794852] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>[    0.794860] software IO TLB [mem 0xa81dc000-0xac1dc000] (64MB) mapped at [ffff8800a81dc000-ffff8800ac1dbfff]
>[    0.794991] Simple Boot Flag at 0x47 set to 0x80
>[    0.795766] futex hash table entries: 2048 (order: 5, 131072 bytes)
>[    0.795824] audit: initializing netlink subsys (disabled)
>[    0.795841] audit: type=2000 audit(1410892361.756:1): initialized
>[    0.796044] HugeTLB registered 2 MB page size, pre-allocated 0 pages
>[    0.797755] VFS: Disk quotas dquot_6.5.2
>[    0.797793] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>[    0.798442] NFS: Registering the id_resolver key type
>[    0.798450] Key type id_resolver registered
>[    0.798452] Key type id_legacy registered
>[    0.798459] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>[    0.798633] fuse init (API version 7.23)
>[    0.798739] msgmni has been set to 7704
>[    0.798978] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
>[    0.798986] io scheduler noop registered
>[    0.798990] io scheduler deadline registered
>[    0.799028] io scheduler cfq registered (default)
>[    0.799126] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>[    0.799266] ACPI: Fan [FAN0] (off)
>[    0.799302] ACPI: Fan [FAN1] (off)
>[    0.799335] ACPI: Fan [FAN2] (off)
>[    0.799367] ACPI: Fan [FAN3] (off)
>[    0.799399] ACPI: Fan [FAN4] (off)
>[    0.799743] Monitor-Mwait will be used to enter C-1 state
>[    0.801387] thermal LNXTHERM:00: registered as thermal_zone0
>[    0.801391] ACPI: Thermal Zone [TZ00] (47 C)
>[    0.802094] thermal LNXTHERM:01: registered as thermal_zone1
>[    0.802098] ACPI: Thermal Zone [TZ01] (47 C)
>[    0.802150] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>[    0.822831] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
>[    0.823282] Non-volatile memory driver v1.3
>[    0.823289] Linux agpgart interface v0.103
>[    0.824515] brd: module loaded
>[    0.824568] Loading iSCSI transport class v2.0-870.
>[    0.824710] iscsi: registered transport (tcp)
>[    0.824798] Adaptec aacraid driver 1.2-0[30300]-ms
>[    0.824828] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
>[    0.824914] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.07.00.08-k.
>[    0.824960] iscsi: registered transport (qla4xxx)
>[    0.824978] QLogic iSCSI HBA Driver
>[    0.825023] DC390: clustering now enabled by default. If you get problems load
>[    0.825026]        with "disable_clustering=1" and report to maintainers
>[    0.825066] GDT-HA: Storage RAID Controller Driver. Version: 3.05
>[    0.825116] RocketRAID 3xxx/4xxx Controller driver v1.8
>[    0.825133] stex: Promise SuperTrak EX Driver version: 4.6.0000.4
>[    0.825177] st: Version 20101219, fixed bufsize 32768, s/g segs 256
>[    0.825200] osst :I: Tape driver with OnStream support version 0.99.4
>[    0.825200] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
>[    0.825273] SCSI Media Changer driver v0.25 
>[    0.825308] ahci 0000:00:1f.2: version 3.0
>[    0.825443] ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
>[    0.825485] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x2 impl SATA mode
>[    0.825494] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst 
>[    0.825978] scsi host0: ahci
>[    0.826070] scsi host1: ahci
>[    0.826148] scsi host2: ahci
>[    0.826226] scsi host3: ahci
>[    0.826267] ata1: DUMMY
>[    0.826270] ata2: SATA max UDMA/133 abar m2048@0xd1037000 port 0xd1037180 irq 40
>[    0.826273] ata3: DUMMY
>[    0.826275] ata4: DUMMY
>[    0.827140] bnx2x: Broadcom NetXtreme II 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.78.19-0 (2014/02/10)
>[    0.827227] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
>[    0.827231] e100: Copyright(c) 1999-2006 Intel Corporation
>[    0.827253] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
>[    0.827256] e1000: Copyright (c) 1999-2006 Intel Corporation.
>[    0.827273] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
>[    0.827275] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
>[    0.827402] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
>[    0.827419] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X
>[    0.991337] e1000e 0000:00:19.0 eth0: registered PHC clock
>[    0.991341] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:13:20:fc:d6:b4
>[    0.991345] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
>[    0.991372] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
>[    0.991391] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.2.13-k
>[    0.991394] igb: Copyright (c) 2007-2014 Intel Corporation.
>[    0.991424] usbcore: registered new interface driver catc
>[    0.991436] usbcore: registered new interface driver kaweth
>[    0.991441] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
>[    0.991453] usbcore: registered new interface driver pegasus
>[    0.991465] usbcore: registered new interface driver rtl8150
>[    0.991480] usbcore: registered new interface driver asix
>[    0.991493] usbcore: registered new interface driver ax88179_178a
>[    0.991506] usbcore: registered new interface driver cdc_ether
>[    0.991518] usbcore: registered new interface driver dm9601
>[    0.991531] usbcore: registered new interface driver gl620a
>[    0.991544] usbcore: registered new interface driver net1080
>[    0.991558] usbcore: registered new interface driver plusb
>[    0.991571] usbcore: registered new interface driver rndis_host
>[    0.991584] usbcore: registered new interface driver cdc_subset
>[    0.991597] usbcore: registered new interface driver zaurus
>[    0.991611] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
>[    0.991632] usbcore: registered new interface driver cdc_ncm
>[    0.991723] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>[    0.991733] ehci-pci: EHCI PCI platform driver
>[    0.991776] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>[    0.991794] ohci-pci: OHCI PCI platform driver
>[    0.991813] uhci_hcd: USB Universal Host Controller Interface driver
>[    0.991942] xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A
>[    0.991945] xhci_hcd 0000:00:14.0: PCI INT A: no GSI
>[    0.991968] xhci_hcd 0000:00:14.0: xHCI Host Controller
>[    0.992011] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
>[    0.992103] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
>[    0.992120] xhci_hcd 0000:00:14.0: irq 42 for MSI/MSI-X
>[    0.992176] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>[    0.992179] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    0.992183] usb usb1: Product: xHCI Host Controller
>[    0.992186] usb usb1: Manufacturer: Linux 3.17.0-rc4_drm-intel-nightly_43df30_20140916+ xhci_hcd
>[    0.992189] usb usb1: SerialNumber: 0000:00:14.0
>[    0.992301] hub 1-0:1.0: USB hub found
>[    0.992320] hub 1-0:1.0: 11 ports detected
>[    0.995613] xhci_hcd 0000:00:14.0: xHCI Host Controller
>[    0.995653] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
>[    0.995690] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
>[    0.995694] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    0.995697] usb usb2: Product: xHCI Host Controller
>[    0.995700] usb usb2: Manufacturer: Linux 3.17.0-rc4_drm-intel-nightly_43df30_20140916+ xhci_hcd
>[    0.995703] usb usb2: SerialNumber: 0000:00:14.0
>[    0.995808] hub 2-0:1.0: USB hub found
>[    0.995819] hub 2-0:1.0: 4 ports detected
>[    0.996629] usb: failed to peer usb2-port3 and usb1-port3 by location (usb2-port3:none) (usb1-port3:usb2-port2)
>[    0.996634] usb usb2-port3: failed to peer to usb1-port3 (-16)
>[    0.996636] usb: port power management may be unreliable
>[    0.997132] usbcore: registered new interface driver usb-storage
>[    0.997181] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
>[    0.997185] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
>[    0.997599] serio: i8042 KBD port at 0x60,0x64 irq 1
>[    0.997680] mousedev: PS/2 mouse device common for all mice
>[    0.997772] rtc_cmos 00:02: RTC can wake from S4
>[    0.997914] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
>[    0.997944] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
>[    0.997960] i2c /dev entries driver
>[    0.997988] hidraw: raw HID events driver (C) Jiri Kosina
>[    0.998209] usbcore: registered new interface driver usbhid
>[    0.998212] usbhid: USB HID core driver
>[    0.998286] TCP: cubic registered
>[    0.998290] Initializing XFRM netlink socket
>[    0.998297] NET: Registered protocol family 17
>[    0.998320] Key type dns_resolver registered
>[    0.998689] registered taskstats version 1
>[    0.999115] Btrfs loaded
>[    0.999368]   Magic number: 14:607:544
>[    0.999488] PM: Hibernation image not present or could not be loaded.
>[    0.999501] Warning: unable to open an initial console.
>[    1.033159] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
>[    1.131009] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[    1.131260] ata2.00: ATA-9: INTEL SSDSC2BB240G4, D2010370, max UDMA/133
>[    1.131264] ata2.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 31/32)
>[    1.131558] ata2.00: configured for UDMA/133
>[    1.131656] scsi 1:0:0:0: Direct-Access     ATA      INTEL SSDSC2BB24 0370 PQ: 0 ANSI: 5
>[    1.131847] sd 1:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/223 GiB)
>[    1.131852] sd 1:0:0:0: [sda] 4096-byte physical blocks
>[    1.131866] sd 1:0:0:0: Attached scsi generic sg0 type 0
>[    1.131935] sd 1:0:0:0: [sda] Write Protect is off
>[    1.131941] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[    1.131965] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    1.133350]  sda: sda1 sda2 sda3
>[    1.133622] sd 1:0:0:0: [sda] Attached SCSI disk
>[    1.137828] Freeing unused kernel memory: 23332K (ffffffff81c4b000 - ffffffff83314000)
>[    1.169021] dracut: dracut-018-35.git20120510.fc17
>[    1.193400] udevd[1432]: starting version 182
>[    1.208857] [drm] Initialized drm 1.1.0 20060810
>[    1.209795] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
>[    1.213301] ACPI: Lid Switch [LID0]
>[    1.213391] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
>[    1.213526] ACPI: Power Button [PWRB]
>[    1.213578] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
>[    1.213622] ACPI: Sleep Button [SLPB]
>[    1.213692] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
>[    1.213882] ACPI: Power Button [PWRF]
>[    1.217437] [drm:i915_dump_device_info] i915 device info: gen=8, pciid=0x1616 rev=0x08 flags=is_mobile,need_gfx_hws,has_fbc,has_hotplug,has_llc,has_ddi,has_fpga_dbg,
>[    1.217457] [drm:intel_detect_pch] This is Broadwell, assuming LynxPoint LP PCH
>[    1.217528] [drm] Memory usable by graphics device = 4096M
>[    1.217535] [drm:i915_gem_gtt_init] GMADR size = 256M
>[    1.217537] [drm:i915_gem_gtt_init] GTT stolen size = 32M
>[    1.217539] [drm:i915_gem_gtt_init] ppgtt mode: 1
>[    1.217541] [drm] Replacing VGA console driver
>[    1.218329] [drm:intel_opregion_setup] graphic opregion physical addr: 0xac776018
>[    1.218338] [drm:intel_opregion_setup] Public ACPI methods supported
>[    1.218339] [drm:intel_opregion_setup] SWSCI supported
>[    1.224055] [drm:swsci_setup] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00700483
>[    1.224058] [drm:intel_opregion_setup] ASLE supported
>[    1.224147] i915 0000:00:02.0: irq 43 for MSI/MSI-X
>[    1.224157] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
>[    1.224162] [drm] Driver supports precise vblank timestamp query.
>[    1.224167] [drm:init_vbt_defaults] Set default to SSC at 120000 kHz
>[    1.224170] [drm:validate_vbt] Using VBT from OpRegion: $VBT HASWELL        d
>[    1.224173] [drm:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0
>[    1.224175] [drm:parse_general_definitions] crt_ddc_bus_pin: 2
>[    1.224178] [drm:parse_lfp_panel_data] DRRS supported mode is static
>[    1.224181] [drm:parse_lfp_panel_data] Found panel mode in BIOS VBT tables:
>[    1.224185] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 0 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x8 0xa
>[    1.224187] [drm:parse_lfp_panel_data] VBT initial LVDS value 30033c
>[    1.224190] [drm:parse_lfp_backlight] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255
>[    1.224193] [drm:parse_sdvo_panel_data] Found SDVO panel mode in BIOS VBT tables:
>[    1.224197] [drm:drm_mode_debug_printmodeline] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
>[    1.224200] [drm:parse_sdvo_device_mapping] No SDVO device info is found in VBT
>[    1.224202] [drm:parse_driver_features] DRRS State Enabled:1
>[    1.224206] [drm:parse_ddi_port] Port A VBT info: DP:1 HDMI:0 DVI:0 EDP:1 CRT:0
>[    1.224209] [drm:parse_ddi_port] VBT HDMI level shift for port A: 0
>[    1.224211] [drm:parse_ddi_port] Port B VBT info: DP:1 HDMI:1 DVI:1 EDP:0 CRT:0
>[    1.224213] [drm:parse_ddi_port] VBT HDMI level shift for port B: 3
>[    1.224216] [drm:parse_ddi_port] Port C VBT info: DP:0 HDMI:1 DVI:1 EDP:0 CRT:0
>[    1.224218] [drm:parse_ddi_port] VBT HDMI level shift for port C: 3
>[    1.224284] [drm:intel_dsm_pci_probe] no _DSM method for intel device
>[    1.224290] [drm:i915_gem_init_stolen] found 33554432 bytes of stolen memory at ae000000
>[    1.224293] [drm:intel_display_power_get] enabling always-on
>[    1.224295] [drm:intel_display_power_get] enabling display
>[    1.224299] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
>[    1.224367] [drm:intel_print_wm_latency] Primary WM0 latency 20 (2.0 usec)
>[    1.224369] [drm:intel_print_wm_latency] Primary WM1 latency 50 (25.0 usec)
>[    1.224371] [drm:intel_print_wm_latency] Primary WM2 latency 90 (45.0 usec)
>[    1.224372] [drm:intel_print_wm_latency] Primary WM3 latency 130 (65.0 usec)
>[    1.224374] [drm:intel_print_wm_latency] Primary WM4 latency 160 (80.0 usec)
>[    1.224375] [drm:intel_print_wm_latency] Sprite WM0 latency 20 (2.0 usec)
>[    1.224377] [drm:intel_print_wm_latency] Sprite WM1 latency 50 (25.0 usec)
>[    1.224378] [drm:intel_print_wm_latency] Sprite WM2 latency 90 (45.0 usec)
>[    1.224380] [drm:intel_print_wm_latency] Sprite WM3 latency 130 (65.0 usec)
>[    1.224381] [drm:intel_print_wm_latency] Sprite WM4 latency 160 (80.0 usec)
>[    1.224383] [drm:intel_print_wm_latency] Cursor WM0 latency 20 (2.0 usec)
>[    1.224384] [drm:intel_print_wm_latency] Cursor WM1 latency 50 (25.0 usec)
>[    1.224386] [drm:intel_print_wm_latency] Cursor WM2 latency 90 (45.0 usec)
>[    1.224387] [drm:intel_print_wm_latency] Cursor WM3 latency 130 (65.0 usec)
>[    1.224389] [drm:intel_print_wm_latency] Cursor WM4 latency 160 (80.0 usec)
>[    1.224391] [drm:intel_modeset_init] 3 display pipes available.
>[    1.224403] [drm:intel_ddi_pll_init] CDCLK running at 675000KHz
>[    1.224710] [drm:intel_dp_init_connector] Adding eDP connector on port A
>[    1.224762] [drm:intel_dp_init_panel_power_sequencer] cur t1_t3 2000 t8 0 t9 2000 t10 500 t11_t12 6000
>[    1.224763] [drm:intel_dp_init_panel_power_sequencer] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000
>[    1.224765] [drm:intel_dp_init_panel_power_sequencer] panel power up delay 200, power down delay 50, power cycle delay 600
>[    1.224767] [drm:intel_dp_init_panel_power_sequencer] backlight on delay 1, off delay 200
>[    1.224769] [drm:intel_dp_aux_init] registering DPDDC-A bus for card0-eDP-1
>[    1.224869] [drm:edp_panel_vdd_on] Turning eDP VDD on
>[    1.224878] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f
>[    1.225154] [drm:intel_dp_get_dpcd] DPCD: 11 0a 02 00 00 00 00 00 00 00 00 00 00 00 00
>[    1.225325] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06
>[    1.247700] [drm:drm_edid_to_eld] ELD: no CEA Extension found
>[    1.247702] [drm:intel_dp_drrs_init] VBT doesn't support DRRS
>[    1.247737] [drm:intel_panel_setup_backlight] backlight initialized, enabled, brightness 937/937, sysfs interface registered
>[    1.247749] [drm:intel_dp_init_connector] Adding DP connector on port B
>[    1.247801] [drm:intel_dp_aux_init] registering DPDDC-B bus for card0-DP-1
>[    1.253073] [drm:intel_modeset_readout_hw_state] [CRTC:8] hw state readout: enabled
>[    1.253076] [drm:intel_modeset_readout_hw_state] [CRTC:12] hw state readout: disabled
>[    1.253078] [drm:intel_modeset_readout_hw_state] [CRTC:16] hw state readout: disabled
>[    1.253080] [drm:intel_modeset_readout_hw_state] WRPLL 1 hw state readout: refcount 0, on 0
>[    1.253082] [drm:intel_modeset_readout_hw_state] WRPLL 2 hw state readout: refcount 0, on 0
>[    1.253086] [drm:intel_modeset_readout_hw_state] [ENCODER:18:TMDS-18] hw state readout: enabled, pipe A
>[    1.253088] [drm:intel_modeset_readout_hw_state] [ENCODER:27:TMDS-27] hw state readout: disabled, pipe A
>[    1.253090] [drm:intel_modeset_readout_hw_state] [ENCODER:29:DP MST-29] hw state readout: disabled, pipe A
>[    1.253091] [drm:intel_modeset_readout_hw_state] [ENCODER:30:DP MST-30] hw state readout: disabled, pipe B
>[    1.253093] [drm:intel_modeset_readout_hw_state] [ENCODER:31:DP MST-31] hw state readout: disabled, pipe C
>[    1.253095] [drm:intel_modeset_readout_hw_state] [ENCODER:34:TMDS-34] hw state readout: disabled, pipe A
>[    1.253097] [drm:intel_modeset_readout_hw_state] [CONNECTOR:19:eDP-1] hw state readout: enabled
>[    1.253099] [drm:intel_modeset_readout_hw_state] [CONNECTOR:28:DP-1] hw state readout: disabled
>[    1.253101] [drm:intel_modeset_readout_hw_state] [CONNECTOR:32:HDMI-A-1] hw state readout: disabled
>[    1.253103] [drm:intel_modeset_readout_hw_state] [CONNECTOR:35:HDMI-A-2] hw state readout: disabled
>[    1.253107] [drm:intel_dump_pipe_config] [CRTC:8][setup_hw_state] config for pipe A
>[    1.253108] [drm:intel_dump_pipe_config] cpu_transcoder: D
>[    1.253109] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
>[    1.253111] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.253114] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64
>[    1.253115] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[    1.253117] [drm:intel_dump_pipe_config] requested mode:
>[    1.253119] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 1920 0 0 0 1080 0 0 0 0x0 0x0
>[    1.253121] [drm:intel_dump_pipe_config] adjusted mode:
>[    1.253123] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0xa
>[    1.253125] [drm:intel_dump_crtc_timings] crtc timings: 138779 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x0 flags: 0xa
>[    1.253127] [drm:intel_dump_pipe_config] port clock: 270000
>[    1.253128] [drm:intel_dump_pipe_config] pipe src size: 1920x1080
>[    1.253130] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    1.253132] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x07800438, enabled
>[    1.253133] [drm:intel_dump_pipe_config] ips: 0
>[    1.253134] [drm:intel_dump_pipe_config] double wide: 0
>[    1.253138] [drm:i915_get_vblank_timestamp] crtc 1 is disabled
>[    1.253141] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe B
>[    1.253143] [drm:i915_get_vblank_timestamp] crtc 1 is disabled
>[    1.253145] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe B
>[    1.253146] [drm:intel_dump_pipe_config] [CRTC:12][setup_hw_state] config for pipe B
>[    1.253148] [drm:intel_dump_pipe_config] cpu_transcoder: B
>[    1.253149] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
>[    1.253151] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.253153] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.253154] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[    1.253155] [drm:intel_dump_pipe_config] requested mode:
>[    1.253158] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    1.253159] [drm:intel_dump_pipe_config] adjusted mode:
>[    1.253161] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    1.253163] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[    1.253164] [drm:intel_dump_pipe_config] port clock: 0
>[    1.253166] [drm:intel_dump_pipe_config] pipe src size: 0x0
>[    1.253167] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    1.253169] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    1.253170] [drm:intel_dump_pipe_config] ips: 0
>[    1.253171] [drm:intel_dump_pipe_config] double wide: 0
>[    1.253173] [drm:i915_get_vblank_timestamp] crtc 2 is disabled
>[    1.253176] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe C
>[    1.253177] [drm:i915_get_vblank_timestamp] crtc 2 is disabled
>[    1.253179] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe C
>[    1.253181] [drm:intel_dump_pipe_config] [CRTC:16][setup_hw_state] config for pipe C
>[    1.253182] [drm:intel_dump_pipe_config] cpu_transcoder: C
>[    1.253183] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
>[    1.253185] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.253187] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.253189] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[    1.253190] [drm:intel_dump_pipe_config] requested mode:
>[    1.253192] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    1.253193] [drm:intel_dump_pipe_config] adjusted mode:
>[    1.253195] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    1.253197] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[    1.253198] [drm:intel_dump_pipe_config] port clock: 0
>[    1.253199] [drm:intel_dump_pipe_config] pipe src size: 0x0
>[    1.253201] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    1.253203] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    1.253204] [drm:intel_dump_pipe_config] ips: 0
>[    1.253205] [drm:intel_dump_pipe_config] double wide: 0
>[    1.253210] [drm:intel_connector_check_state] [CONNECTOR:19:eDP-1]
>[    1.253213] [drm:check_encoder_state] [ENCODER:18:TMDS-18]
>[    1.253215] [drm:check_encoder_state] [ENCODER:27:TMDS-27]
>[    1.253217] [drm:check_encoder_state] [ENCODER:29:DP MST-29]
>[    1.253218] [drm:check_encoder_state] [ENCODER:30:DP MST-30]
>[    1.253219] [drm:check_encoder_state] [ENCODER:31:DP MST-31]
>[    1.253220] [drm:check_encoder_state] [ENCODER:34:TMDS-34]
>[    1.253222] [drm:check_crtc_state] [CRTC:8]
>[    1.253229] [drm:check_crtc_state] [CRTC:12]
>[    1.253231] [drm:check_crtc_state] [CRTC:16]
>[    1.253232] [drm:check_shared_dpll_state] WRPLL 1
>[    1.253234] [drm:check_shared_dpll_state] WRPLL 2
>[    1.253239] [drm:ironlake_get_plane_config] pipe/plane 0/0 with fb: size=1920x1080@32, offset=0, pitch 7680, size 0x7e9000
>[    1.253241] [drm:i915_gem_object_create_stolen_for_preallocated] creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=7e9000
>[    1.253245] [drm:i915_pages_create_for_stolen] offset=0x0, size=8294400
>[    1.253248] [drm:intel_alloc_plane_obj] plane fb obj ffff880002c04000
>[    1.253251] [drm:i915_gem_setup_global_gtt] reserving preallocated space: 0 + 7e9000
>[    1.253253] [drm:i915_gem_setup_global_gtt] clearing unused GTT space: [7e9000, fffff000]
>[    1.256126] [drm:gen8_ppgtt_init] Allocated 4 pages for page directories (0 wasted)
>[    1.256129] [drm:gen8_ppgtt_init] Allocated 2048 pages for page tables (0 wasted)
>[    1.256165] [drm:i915_gem_context_init] HW context support initialized
>[    1.256173] [drm:init_status_page] render ring hws offset: 0x007fb000
>[    1.256252] [drm:intel_init_pipe_control] render ring pipe control offset: 0x0081c000
>[    1.256258] [drm:init_status_page] bsd ring hws offset: 0x0081d000
>[    1.256320] [drm:init_status_page] blitter ring hws offset: 0x0083e000
>[    1.256376] [drm:init_status_page] video enhancement ring hws offset: 0x0085f000
>[    1.256437] [drm:bdw_init_workarounds] Number of Workarounds applied: 8
>[    1.256602] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:eDP-1]
>[    1.256604] [drm:intel_dp_detect] [CONNECTOR:19:eDP-1]
>[    1.256615] [drm:drm_edid_to_eld] ELD: no CEA Extension found
>[    1.256619] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:eDP-1] probed modes :
>[    1.256622] [drm:drm_mode_debug_printmodeline] Modeline 20:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa
>[    1.256625] [drm:drm_mode_debug_printmodeline] Modeline 21:"1920x1080" 40 92520 1920 1966 1996 2080 1080 1082 1086 1112 0x40 0xa
>[    1.256626] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:28:DP-1]
>[    1.256628] [drm:intel_dp_detect] [CONNECTOR:28:DP-1]
>[    1.256632] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:28:DP-1] disconnected
>[    1.256634] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:32:HDMI-A-1]
>[    1.256635] [drm:intel_hdmi_detect] [CONNECTOR:32:HDMI-A-1]
>[    1.256792] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
>[    1.256794] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
>[    1.256796] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:32:HDMI-A-1] disconnected
>[    1.256797] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:35:HDMI-A-2]
>[    1.256798] [drm:intel_hdmi_detect] [CONNECTOR:35:HDMI-A-2]
>[    1.256957] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[    1.256958] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[    1.256960] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:35:HDMI-A-2] disconnected
>[    1.256961] [drm:drm_setup_crtcs] 
>[    1.256963] [drm:drm_enable_connectors] connector 19 enabled? yes
>[    1.256964] [drm:drm_enable_connectors] connector 28 enabled? no
>[    1.256966] [drm:drm_enable_connectors] connector 32 enabled? no
>[    1.256967] [drm:drm_enable_connectors] connector 35 enabled? no
>[    1.256969] [drm:intel_fb_initial_config] looking for cmdline mode on connector eDP-1
>[    1.256970] [drm:intel_fb_initial_config] looking for preferred mode on connector eDP-1
>[    1.256972] [drm:intel_fb_initial_config] connector eDP-1 on pipe A [CRTC:8]: 1920x1080
>[    1.256974] [drm:intel_fb_initial_config] connector DP-1 not enabled, skipping
>[    1.256975] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping
>[    1.256976] [drm:intel_fb_initial_config] connector HDMI-A-2 not enabled, skipping
>[    1.256978] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 8
>[    1.256980] [drm:intelfb_create] no BIOS fb, allocating a new one
>[    1.256982] [drm:i915_gem_object_create_stolen] creating stolen object: size=7e9000
>[    1.256988] [drm:i915_pages_create_for_stolen] offset=0x7e9000, size=8294400
>[    1.257808] [drm:intelfb_create] allocated 1920x1080 fb: 0x00881000, bo ffff880002aec000
>[    1.257873] fbcon: inteldrmfb (fb0) is primary device
>[    1.257948] [drm:intel_crtc_set_config] [CRTC:8] [FB:38] #connectors=1 (x y) (0 0)
>[    1.257949] [drm:intel_set_config_compute_mode_changes] modes are different, full mode set
>[    1.257951] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    1.257953] [drm:drm_mode_debug_printmodeline] Modeline 37:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa
>[    1.257954] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=1, fb_changed=1
>[    1.257956] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8]
>[    1.257958] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
>[    1.257960] [drm:connected_sink_compute_bpp] [CONNECTOR:19:eDP-1] checking for sink bpp constrains
>[    1.257962] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 0a pixel clock 138780KHz
>[    1.257967] [drm:intel_dp_compute_config] DP link bw 0a lane count 2 clock 270000 bpp 24
>[    1.257968] [drm:intel_dp_compute_config] DP link bw required 333072 available 432000
>[    1.257970] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0
>[    1.257971] [drm:intel_dump_pipe_config] [CRTC:8][modeset] config for pipe A
>[    1.257972] [drm:intel_dump_pipe_config] cpu_transcoder: D
>[    1.257972] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
>[    1.257974] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.257975] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64
>[    1.257977] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[    1.257977] [drm:intel_dump_pipe_config] requested mode:
>[    1.257979] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa
>[    1.257980] [drm:intel_dump_pipe_config] adjusted mode:
>[    1.257982] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa
>[    1.257985] [drm:intel_dump_crtc_timings] crtc timings: 138780 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x48 flags: 0xa
>[    1.257986] [drm:intel_dump_pipe_config] port clock: 270000
>[    1.257987] [drm:intel_dump_pipe_config] pipe src size: 1920x1080
>[    1.257988] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    1.257990] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    1.257990] [drm:intel_dump_pipe_config] ips: 1
>[    1.257992] [drm:intel_dump_pipe_config] double wide: 0
>[    1.258005] [drm:intel_edp_backlight_off] 
>[    1.265371] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
>[    1.265457] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
>[    1.265579] [drm] Initialized i915 1.6.0 20140905 for 0000:00:02.0 on minor 0
>[    1.348130] usb 1-1: new high-speed USB device number 2 using xhci_hcd
>[    1.458169] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0
>[    1.464338] [drm:intel_edp_panel_off] Turn eDP power off
>[    1.464341] [drm:wait_panel_off] Wait for panel power off time
>[    1.464345] [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control abcd0000
>[    1.516413] usb 1-1: New USB device found, idVendor=07a6, idProduct=8515
>[    1.516415] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[    1.516416] usb 1-1: Product: USB To LAN Converter
>[    1.516417] usb 1-1: Manufacturer: ADMtek
>[    1.516418] usb 1-1: SerialNumber: 0001
>[    1.517236] pegasus 1-1:1.0: setup Pegasus II specific registers
>[    1.520183] [drm:wait_panel_status] Wait complete
>[    1.520188] [drm:intel_update_fbc] no output, disabling
>[    1.520192] [drm:intel_display_power_put] disabling display
>[    1.520193] [drm:hsw_set_power_well] Requesting to disable the power well
>[    1.520207] [drm:intel_edp_panel_on] Turn eDP power on
>[    1.520210] [drm:wait_panel_power_cycle] Wait for panel power cycle
>[    1.618339] pegasus 1-1:1.0: eth1, ADMtek ADM8515 "Pegasus II" USB-2.0 Ethernet, 00:00:e8:00:05:c8
>[    1.798347] tsc: Refined TSC clocksource calibration: 2095.152 MHz
>[    2.065488] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0000
>[    2.065489] [drm:wait_panel_status] Wait complete
>[    2.065492] [drm:wait_panel_on] Wait for panel power on
>[    2.065495] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd0003
>[    2.274591] [drm:wait_panel_status] Wait complete
>[    2.274598] [drm:edp_panel_vdd_on] Turning eDP VDD on
>[    2.274604] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b
>[    2.275683] [drm:intel_dp_set_signal_levels] Using signal levels 00000000
>[    2.276140] [drm:intel_dp_start_link_train] clock recovery OK
>[    2.276898] [drm:intel_dp_complete_link_train] Channel EQ done. DP Training successful
>[    2.277138] [drm:intel_edp_backlight_on] 
>[    2.277140] [drm:intel_panel_enable_backlight] pipe A
>[    2.277144] [drm:intel_panel_actually_set_backlight] set backlight PWM = 937
>[    2.277149] [drm:intel_edp_psr_enable] PSR not supported by this panel
>[    2.277155] [drm:ironlake_update_primary_plane] Writing base 00881000 00000000 0 0 7680
>[    2.312610] [drm:intel_update_fbc] disabled per chip default
>[    2.312614] [drm:intel_connector_check_state] [CONNECTOR:19:eDP-1]
>[    2.312617] [drm:check_encoder_state] [ENCODER:18:TMDS-18]
>[    2.312618] [drm:check_encoder_state] [ENCODER:27:TMDS-27]
>[    2.312619] [drm:check_encoder_state] [ENCODER:29:DP MST-29]
>[    2.312620] [drm:check_encoder_state] [ENCODER:30:DP MST-30]
>[    2.312621] [drm:check_encoder_state] [ENCODER:31:DP MST-31]
>[    2.312621] [drm:check_encoder_state] [ENCODER:34:TMDS-34]
>[    2.312623] [drm:check_crtc_state] [CRTC:8]
>[    2.312628] [drm:check_crtc_state] [CRTC:12]
>[    2.312629] [drm:check_crtc_state] [CRTC:16]
>[    2.312630] [drm:check_shared_dpll_state] WRPLL 1
>[    2.312631] [drm:check_shared_dpll_state] WRPLL 2
>[    2.312644] [drm:intel_crtc_set_config] [CRTC:12] [NOFB]
>[    2.312646] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:12], mode_changed=0, fb_changed=0
>[    2.312647] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8]
>[    2.312649] [drm:intel_crtc_set_config] [CRTC:16] [NOFB]
>[    2.312650] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:16], mode_changed=0, fb_changed=0
>[    2.312651] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8]
>[    2.312657] Console: switching to colour frame buffer device 240x67
>[    2.312664] [drm:intel_crtc_set_config] [CRTC:8] [FB:38] #connectors=1 (x y) (0 0)
>[    2.312666] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[    2.312667] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8]
>[    2.321056] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
>[    2.321095] i915 0000:00:02.0: registered panic notifier
>[    2.324738] dracut: Starting plymouth daemon
>[    2.331381] [drm:intel_crtc_set_config] [CRTC:8] [FB:38] #connectors=1 (x y) (0 0)
>[    2.331384] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[    2.331385] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8]
>[    2.345370] [drm:intel_crtc_set_config] [CRTC:8] [FB:38] #connectors=1 (x y) (0 0)
>[    2.345374] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[    2.345375] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8]
>[    2.411965] EXT4-fs (sda2): INFO: recovery required on readonly filesystem
>[    2.412013] EXT4-fs (sda2): write access will be enabled during recovery
>[    2.440548] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
>[    2.440731] ACPI: AC Adapter [ADP1] (on-line)
>[    2.457196] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
>[    2.457298] ACPI: Battery Slot [BAT0] (battery present)
>[    2.457410] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
>[    2.457508] ACPI: Battery Slot [BAT1] (battery absent)
>[    2.457684] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
>[    2.457781] ACPI: Battery Slot [BAT2] (battery absent)
>[    2.468831] snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002)
>[    2.469024] [drm:intel_display_power_get] enabling display
>[    2.469030] [drm:hsw_set_power_well] Enabling power well
>[    2.469068] snd_hda_intel 0000:00:03.0: irq 44 for MSI/MSI-X
>[    2.471422] EXT4-fs (sda2): recovery complete
>[    2.471730] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
>[    2.471734] i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003)
>[    2.471859] ACPI Warning: SystemIO range 0x000000000000efa0-0x000000000000efbf conflicts with OpRegion 0x000000000000efa0-0x000000000000efaf (\_SB_.PCI0.SBUS.SMBI) (20140724/utaddress-258)
>[    2.472017] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[    2.474232] input: PC Speaker as /devices/platform/pcspkr/input/input6
>[    2.483902] random: nonblocking pool is initialized
>[    2.493345] iTCO_vendor_support: vendor-support=0
>[    2.493564] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
>[    2.493653] iTCO_wdt: Found a Wildcat Point_LP TCO device (Version=2, TCOBASE=0x1860)
>[    2.493876] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>[    2.494322] ppdev: user-space parallel port driver
>[    2.498612] [drm:intel_crtc_set_config] [CRTC:8] [FB:38] #connectors=1 (x y) (0 0)
>[    2.498616] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[    2.498618] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8]
>[    2.513279] dracut: Checking ext4: /dev/sda2
>[    2.513440] dracut: issuing e2fsck -a  /dev/sda2
>[    2.525135] dracut: /dev/sda2: clean, 1005134/13598720 files, 28546922/54372608 blocks
>[    2.527787] dracut: Remounting /dev/sda2 with -o errors=remount-ro,ro
>[    2.540271] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: errors=remount-ro
>[    2.545828] dracut: Mounted root filesystem /dev/sda2
>[    2.557340] device-mapper: uevent: version 1.0.3
>[    2.559724] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
>[    2.604900] dracut: Switching root
>[    2.665986] init: ureadahead main process (2721) terminated with status 5
>[    2.746863] [drm:intel_print_rc6_info] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
>[    2.798902] Switched to clocksource tsc
>[    3.809658] systemd-udevd[2838]: starting version 204
>[    3.901497] e1000e 0000:00:19.0 eth3: renamed from eth0
>[    3.912248] [drm:intel_crtc_set_config] [CRTC:8] [FB:38] #connectors=1 (x y) (0 0)
>[    3.912253] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[    3.912255] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8]
>[    3.927730] init: Failed to spawn ufw pre-start process: unable to execute: No such file or directory
>[    3.930496] init: Failed to spawn ufw post-stop process: unable to execute: No such file or directory
>[    3.961696] [drm:i915_gem_open] 
>[    3.961730] [drm:intel_crtc_set_config] [CRTC:8] [FB:38] #connectors=1 (x y) (0 0)
>[    3.961735] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[    3.961739] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8]
>[    3.961743] [drm:intel_crtc_set_config] [CRTC:12] [NOFB]
>[    3.961746] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:12], mode_changed=0, fb_changed=0
>[    3.961748] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8]
>[    3.961751] [drm:intel_crtc_set_config] [CRTC:16] [NOFB]
>[    3.961753] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:16], mode_changed=0, fb_changed=0
>[    3.961756] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8]
>[    3.961781] [drm:i915_gem_open] 
>[    3.961831] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[4] ENCODERS[6]
>[    3.961836] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[4] ENCODERS[6]
>[    3.961846] [drm:drm_mode_getconnector] [CONNECTOR:19:?]
>[    3.961850] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:eDP-1]
>[    3.961852] [drm:intel_dp_detect] [CONNECTOR:19:eDP-1]
>[    3.961866] [drm:drm_edid_to_eld] ELD: no CEA Extension found
>[    3.961871] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:eDP-1] probed modes :
>[    3.961876] [drm:drm_mode_debug_printmodeline] Modeline 20:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa
>[    3.961880] [drm:drm_mode_debug_printmodeline] Modeline 21:"1920x1080" 40 92520 1920 1966 1996 2080 1080 1082 1086 1112 0x40 0xa
>[    3.961884] [drm:drm_mode_getconnector] [CONNECTOR:19:?]
>[    3.971772] [drm:drm_mode_getconnector] [CONNECTOR:28:?]
>[    3.971779] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:28:DP-1]
>[    3.971781] [drm:intel_dp_detect] [CONNECTOR:28:DP-1]
>[    3.971790] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:28:DP-1] disconnected
>[    3.971796] [drm:drm_mode_getconnector] [CONNECTOR:28:?]
>[    3.971798] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:28:DP-1]
>[    3.971800] [drm:intel_dp_detect] [CONNECTOR:28:DP-1]
>[    3.971805] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:28:DP-1] disconnected
>[    3.971811] [drm:drm_mode_getconnector] [CONNECTOR:32:?]
>[    3.971814] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:32:HDMI-A-1]
>[    3.971816] [drm:intel_hdmi_detect] [CONNECTOR:32:HDMI-A-1]
>[    3.972495] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
>[    3.972500] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
>[    3.972505] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:32:HDMI-A-1] disconnected
>[    3.972513] [drm:drm_mode_getconnector] [CONNECTOR:32:?]
>[    3.972516] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:32:HDMI-A-1]
>[    3.972518] [drm:intel_hdmi_detect] [CONNECTOR:32:HDMI-A-1]
>[    3.972680] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
>[    3.972683] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
>[    3.972687] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:32:HDMI-A-1] disconnected
>[    3.972696] [drm:drm_mode_getconnector] [CONNECTOR:35:?]
>[    3.972699] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:35:HDMI-A-2]
>[    3.972701] [drm:intel_hdmi_detect] [CONNECTOR:35:HDMI-A-2]
>[    3.973287] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[    3.973291] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[    3.973295] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:35:HDMI-A-2] disconnected
>[    3.973301] [drm:drm_mode_getconnector] [CONNECTOR:35:?]
>[    3.973304] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:35:HDMI-A-2]
>[    3.973306] [drm:intel_hdmi_detect] [CONNECTOR:35:HDMI-A-2]
>[    3.973456] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[    3.973459] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[    3.973462] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:35:HDMI-A-2] disconnected
>[    3.973486] [drm:drm_mode_addfb] [FB:36]
>[    3.975364] pegasus 1-1:1.0 eth6: renamed from eth1
>[    4.045861] init: Failed to spawn ufw pre-start process: unable to execute: No such file or directory
>[    4.048735] init: Failed to spawn ufw post-stop process: unable to execute: No such file or directory
>[    4.065343] Adding 16440316k swap on /dev/sda3.  Priority:-1 extents:1 across:16440316k SS
>[    4.069900] init: Failed to spawn ufw pre-start process: unable to execute: No such file or directory
>[    4.072289] init: Failed to spawn ufw post-stop process: unable to execute: No such file or directory
>[    4.090960] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
>[    4.169871] init: Failed to spawn ufw pre-start process: unable to execute: No such file or directory
>[    4.172844] init: Failed to spawn ufw post-stop process: unable to execute: No such file or directory
>[    4.229178] init: failsafe main process (3761) killed by TERM signal
>[    4.231593] [drm:edp_panel_vdd_off_sync] Turning eDP VDD off
>[    4.231603] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007
>[    4.242889] init: Failed to spawn bluetooth main process: unable to execute: No such file or directory
>[    4.254399] init: Failed to spawn ufw pre-start process: unable to execute: No such file or directory
>[    4.260765] init: Failed to spawn ufw post-stop process: unable to execute: No such file or directory
>[    4.395203] init: avahi-cups-reload main process (3918) terminated with status 1
>[    4.580899] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X
>[    4.681850] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X
>[    5.113842] [drm:intel_crtc_set_config] [CRTC:8] [FB:38] #connectors=1 (x y) (0 0)
>[    5.113848] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[    5.113850] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8]
>[    5.113853] [drm:intel_crtc_set_config] [CRTC:12] [NOFB]
>[    5.113855] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:12], mode_changed=0, fb_changed=0
>[    5.113857] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8]
>[    5.113858] [drm:intel_crtc_set_config] [CRTC:16] [NOFB]
>[    5.113860] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:16], mode_changed=0, fb_changed=0
>[    5.113862] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8]
>[    5.113888] [drm:intel_crtc_set_config] [CRTC:8] [FB:38] #connectors=1 (x y) (0 0)
>[    5.113889] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[    5.113890] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8]
>[   61.635894] pm_rps: executing
>[   61.635974] [drm:i915_gem_open] 
>[   61.636001] [drm:intel_crtc_set_config] [CRTC:8] [FB:38] #connectors=1 (x y) (0 0)
>[   61.636009] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[   61.636011] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8]
>[   61.636014] [drm:intel_crtc_set_config] [CRTC:12] [NOFB]
>[   61.636016] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:12], mode_changed=0, fb_changed=0
>[   61.636018] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8]
>[   61.636019] [drm:intel_crtc_set_config] [CRTC:16] [NOFB]
>[   61.636021] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:16], mode_changed=0, fb_changed=0
>[   61.636023] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8]
>[   61.636032] [drm:i915_gem_open] 
>[   61.636251] [drm:i915_gem_open] 
>[   61.636457] pm_rps: starting subtest reset
>[   81.653385] [drm:i915_ring_stop_set] Stopping rings 0x400000ff
>[   88.779302] [drm] stuck on render ring
>[   88.780487] [drm] GPU HANG: ecode 0:0xeed7efe7, in pm_rps [4529], reason: Ring hung, action: reset
>[   88.780489] [drm] GPU hangs can indicate a bug anywhere in the entire gfx stack, including userspace.
>[   88.780490] [drm] Please file a _new_ bug report on bugs.freedesktop.org against DRI -> DRM/Intel
>[   88.780491] [drm] drm/i915 developers can then reassign to the right component if it's not a kernel issue.
>[   88.780492] [drm] The gpu crash dump is required to analyze gpu hangs, so please always attach it.
>[   88.780493] [drm] GPU crash dump saved to /sys/class/drm/card0/error
>[   88.780567] [drm:i915_error_work_func] resetting chip
>[   88.782262] [drm] Simulated gpu hang, resetting stop_rings
>[   88.782269] [drm:init_status_page] render ring hws offset: 0x007fb000
>[   88.782293] [drm:init_status_page] bsd ring hws offset: 0x0081d000
>[   88.782303] [drm:init_status_page] blitter ring hws offset: 0x0083e000
>[   88.782311] [drm:init_status_page] video enhancement ring hws offset: 0x0085f000
>[   88.782331] [drm:ironlake_update_primary_plane] Writing base 00881000 00000000 0 0 7680
>[   88.861191] [drm:intel_print_rc6_info] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
>[  110.709263] [drm:intel_crtc_set_config] [CRTC:8] [FB:38] #connectors=1 (x y) (0 0)
>[  110.709269] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[  110.709271] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8]
>[  110.709274] [drm:intel_crtc_set_config] [CRTC:12] [NOFB]
>[  110.709276] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:12], mode_changed=0, fb_changed=0
>[  110.709278] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8]
>[  110.709279] [drm:intel_crtc_set_config] [CRTC:16] [NOFB]
>[  110.709281] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:16], mode_changed=0, fb_changed=0
>[  110.709283] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8]
>[  126.120354] pm_rps: executing
>[  126.120415] [drm:i915_gem_open] 
>[  126.120443] [drm:intel_crtc_set_config] [CRTC:8] [FB:38] #connectors=1 (x y) (0 0)
>[  126.120447] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[  126.120449] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8]
>[  126.120451] [drm:intel_crtc_set_config] [CRTC:12] [NOFB]
>[  126.120453] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:12], mode_changed=0, fb_changed=0
>[  126.120455] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8]
>[  126.120456] [drm:intel_crtc_set_config] [CRTC:16] [NOFB]
>[  126.120458] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:16], mode_changed=0, fb_changed=0
>[  126.120460] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8]
>[  126.120469] [drm:i915_gem_open] 
>[  126.120654] [drm:i915_gem_open] 
>[  126.120790] pm_rps: starting subtest blocking
>[  126.120802] [drm:i915_gem_open] 
>[  171.164579] [drm:intel_crtc_set_config] [CRTC:8] [FB:38] #connectors=1 (x y) (0 0)
>[  171.164585] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[  171.164587] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8]
>[  171.164590] [drm:intel_crtc_set_config] [CRTC:12] [NOFB]
>[  171.164592] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:12], mode_changed=0, fb_changed=0
>[  171.164594] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8]
>[  171.164596] [drm:intel_crtc_set_config] [CRTC:16] [NOFB]
>[  171.164597] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:16], mode_changed=0, fb_changed=0
>[  171.164599] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8]

Actions: View

Attachments on bug 83915: 106352

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.