Attachment 112971 Details for Bug 88868 – kernel_3.18.5_log & corenet64_smp_defconfig for powerpc e5500

kernel_3.18.5_log & corenet64_smp_defconfig for powerpc e5500

kernel_3.18.5_log (text/plain), 20.41 KB, created by Dmitriy on 2015-01-30 10:55:49 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Dmitriy

Created: 2015-01-30 10:55:49 UTC

Size: 20.41 KB

patch

obsolete

>Allocated 49152 bytes for 24 pacas at c00000000fff4000
>Using CoreNet Generic machine description
>MMU: Supported page sizes
>         4 KB as direct
>      4096 KB as direct
>     16384 KB as direct
>     65536 KB as direct
>    262144 KB as direct
>   1048576 KB as direct
>MMU: Book3E HW tablewalk not supported
>Found initrd at 0xc00000002fc62000:0xc00000002ffffb62
>Found legacy serial port 0 for /soc@ffe000000/serial@11c500
>  mem=ffe11c500, taddr=ffe11c500, irq=0, clk=400000000, speed=0
>Found legacy serial port 1 for /soc@ffe000000/serial@11c600
>  mem=ffe11c600, taddr=ffe11c600, irq=0, clk=400000000, speed=0
>Found legacy serial port 2 for /soc@ffe000000/serial@11d500
>  mem=ffe11d500, taddr=ffe11d500, irq=0, clk=400000000, speed=0
>Found legacy serial port 3 for /soc@ffe000000/serial@11d600
>  mem=ffe11d600, taddr=ffe11d600, irq=0, clk=400000000, speed=0
>bootconsole [udbg0] enabled
>CPU maps initialized for 1 thread per core
> (thread shift is 0)
>Freed 40960 bytes for unused pacas
>Starting Linux PPC64 #3 SMP Sat Jan 31 13:37:58 MSK 2015
>-----------------------------------------------------
>ppc64_pft_size    = 0x0
>phys_mem_size     = 0x200000000
>dcache_line_size  = 0x40
>icache_line_size  = 0x40
>cpu_features      = 0x00180400581802c0
>  possible        = 0x08380480581802c8
>  always          = 0x0000000010100240
>cpu_user_features = 0xcc008000 0x08000000
>mmu_features      = 0x000a0010
>firmware_features = 0x0000000000000000
>-----------------------------------------------------
> <- setup_system()
>Linux version 3.18.5 (dima@ubunta) (gcc version 4.7.3 (GCC) ) #3 SMP Sat Jan 31 13:37:58 MSK 2015
>CF000012
>
>Setup Arch
>[boot]0012 Setup Arch
>CoreNet Generic board
>Top of RAM: 0x200000000, Total RAM: 0x200000000
>Memory hole size: 0MB
>Zone ranges:
>  DMA      [mem 0x00000000-0x7fffffff]
>  DMA32    empty
>  Normal   [mem 0x80000000-0x1ffffffff]
>Movable zone start for each node
>Early memory node ranges
>  node   0: [mem 0x00000000-0x1ffffffff]
>Initmem setup node 0 [mem 0x00000000-0x1ffffffff]
>On node 0 totalpages: 2097152
>free_area_init_node: node 0, pgdat c000000000a9f840, node_mem_map c000000003ff3000
>  DMA zone: 7168 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 524288 pages, LIFO batch:31
>  Normal zone: 21504 pages used for memmap
>  Normal zone: 1572864 pages, LIFO batch:31
>MMU: Allocated 2112 bytes of context maps for 255 contexts
>CF000015
>
>Setup Done
>[boot]0015 Setup Done
>PERCPU: Embedded 12 pages/cpu @c00000000b100000 s11072 r0 d38080 u262144
>pcpu-alloc: s11072 r0 d38080 u262144 alloc=1*1048576
>pcpu-alloc: [0] 0 1 2 3 
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2068480
>Kernel command line: console=ttyS0,115200 root=/dev/ram rw loglevel=8
>log_buf_len individual max cpu contribution: 4096 bytes
>log_buf_len total cpu_extra contributions: 12288 bytes
>log_buf_len min size: 16384 bytes
>log_buf_len: 32768 bytes
>early log buf free: 12512(76%)
>PID hash table entries: 4096 (order: 3, 32768 bytes)
>Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
>Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
>Sorting __ex_table...
>Memory: 8178752K/8388608K available (7464K kernel code, 1260K rwdata, 2780K rodata, 292K init, 222K bss, 20)
>SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
>Hierarchical RCU implementation.
>        RCU restricting CPUs from NR_CPUS=24 to nr_cpu_ids=4.
>RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
>NR_IRQS:512 nr_irqs:512 16
>mpic: Setting up MPIC " OpenPIC  " version 1.2 at ffe040000, max 4 CPUs
>mpic: ISU size: 512, shift: 9, mask: 1ff
>mpic: Initializing for 512 sources
>time_init: decrementer frequency = 50.000000 MHz
>time_init: processor frequency   = 2200.000000 MHz
>clocksource: timebase mult[14000000] shift[24] registered
>clockevent: decrementer mult[ccccccd] shift[32] cpu[0]
>Console: colour dummy device 80x25
>pid_max: default: 32768 minimum: 301
>Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
>Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
>Brought up 4 CPUs
>devtmpfs: initialized
>NET: Registered protocol family 16
>Found FSL PCI host bridge at 0x0000000ffe200000. Firmware bus number: 0->1
>PCI host bridge /pcie@ffe200000  ranges:
> MEM 0x0000000c00000000..0x0000000c1fffffff -> 0x00000000e0000000 
>  IO 0x0000000ff8000000..0x0000000ff800ffff -> 0x0000000000000000
>/pcie@ffe200000: PCICSRBAR @ 0xdf000000
>/pcie@ffe200000: Setup 64-bit PCI DMA window
>/pcie@ffe200000: DMA window size is 0xdf000000
>Found FSL PCI host bridge at 0x0000000ffe201000. Firmware bus number: 0->0
>PCI host bridge /pcie@ffe201000  ranges:
> MEM 0x0000000c20000000..0x0000000c3fffffff -> 0x00000000e0000000 
>  IO 0x0000000ff8010000..0x0000000ff801ffff -> 0x0000000000000000
>/pcie@ffe201000: PCICSRBAR @ 0xdf000000
>/pcie@ffe201000: Setup 64-bit PCI DMA window
>/pcie@ffe201000: DMA window size is 0xdf000000
>software IO TLB [mem 0x0bdcc000-0x0fdcc000] (64MB) mapped at [c00000000bdcc000-c00000000fdcbfff]
>PCI: Probing PCI hardware
>fsl-pci ffe200000.pcie: PCI host bridge to bus 0000:00
>pci_bus 0000:00: root bus resource [io  0x10000-0x1ffff] (bus address [0x0000-0xffff])
>pci_bus 0000:00: root bus resource [mem 0xc00000000-0xc1fffffff] (bus address [0xe0000000-0xffffffff])
>pci_bus 0000:00: root bus resource [bus 00-01]
>pci_bus 0000:00: busn_res: [bus 00-01] end is updated to ff
>pci 0000:00:00.0: [1957:0450] type 01 class 0x0b2000
>pci 0000:00:00.0: reg 0x10: [mem 0xdf000000-0xdfffffff]
>pci 0000:00:00.0: supports D1 D2
>pci 0000:00:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:01:00.0: [10de:1040] type 00 class 0x030000
>pci 0000:01:00.0: reg 0x10: [mem 0xc00000000-0xc00ffffff]
>pci 0000:01:00.0: reg 0x14: [mem 0xc08000000-0xc0fffffff 64bit pref]
>pci 0000:01:00.0: reg 0x1c: [mem 0xc10000000-0xc11ffffff 64bit pref]
>pci 0000:01:00.0: reg 0x24: [io  0x11000-0x1107f]
>pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref]
>pci 0000:01:00.1: [10de:0e08] type 00 class 0x040300
>pci 0000:01:00.1: reg 0x10: [mem 0xc12000000-0xc12003fff]
>pci 0000:00:00.0: PCI bridge to [bus 01-ff]
>pci 0000:00:00.0:   bridge window [io  0x11000-0x11fff]
>pci 0000:00:00.0:   bridge window [mem 0xc00000000-0xc120fffff]
>pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
>pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 01
>fsl-pci ffe201000.pcie: PCI host bridge to bus 0001:00
>pci_bus 0001:00: root bus resource [io  0x21000-0x30fff] (bus address [0x0000-0xffff])
>pci_bus 0001:00: root bus resource [mem 0xc20000000-0xc3fffffff] (bus address [0xe0000000-0xffffffff])
>pci_bus 0001:00: root bus resource [bus 00]
>pci_bus 0001:00: busn_res: [bus 00] end is updated to ff
>pci 0001:00:00.0: [1957:0450] type 01 class 0x0b2000
>pci 0001:00:00.0: reg 0x10: [mem 0xdf000000-0xdfffffff]
>pci 0001:00:00.0: supports D1 D2
>pci 0001:00:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0001:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
>pci 0001:00:00.0: PCI bridge to [bus 01-ff]
>pci 0001:00:00.0:   bridge window [io  0x21000-0x21fff]
>pci 0001:00:00.0:   bridge window [mem 0x00000000-0x000fffff]
>pci 0001:00:00.0:   bridge window [mem 0x00000000-0x000fffff 64bit pref]
>pci_bus 0001:01: busn_res: [bus 01-ff] end is updated to 01
>pci_bus 0001:00: busn_res: [bus 00-ff] end is updated to 01
>PCI: Cannot allocate resource region 0 of device 0000:00:00.0, will remap
>PCI: Cannot allocate resource region 0 of device 0001:00:00.0, will remap
>PCI 0000:00 Cannot reserve Legacy IO [io  0x10000-0x10fff]
>PCI 0001:00 Cannot reserve Legacy IO [io  0x21000-0x21fff]
>pci 0000:00:00.0: BAR 0: no space for [mem size 0x01000000]
>pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x01000000]
>pci 0000:01:00.0: BAR 6: assigned [mem 0xc01000000-0xc0107ffff pref]
>pci 0000:00:00.0: PCI bridge to [bus 01]
>pci 0000:00:00.0:   bridge window [io  0x10000-0x1ffff]
>pci 0000:00:00.0:   bridge window [mem 0xc00000000-0xc1fffffff]
>pci_bus 0000:00: Some PCI device resources are unassigned, try booting with pci=realloc
>pci_bus 0000:00: resource 4 [io  0x10000-0x1ffff]
>pci_bus 0000:00: resource 5 [mem 0xc00000000-0xc1fffffff]
>pci_bus 0000:01: resource 0 [io  0x10000-0x1ffff]
>pci_bus 0000:01: resource 1 [mem 0xc00000000-0xc1fffffff]
>pci 0001:00:00.0: BAR 0: no space for [mem size 0x01000000]
>pci 0001:00:00.0: BAR 0: failed to assign [mem size 0x01000000]
>pci 0001:00:00.0: PCI bridge to [bus 01]
>pci 0001:00:00.0:   bridge window [io  0x21000-0x30fff]
>pci 0001:00:00.0:   bridge window [mem 0xc20000000-0xc3fffffff]
>pci_bus 0001:00: Some PCI device resources are unassigned, try booting with pci=realloc
>pci_bus 0001:00: resource 4 [io  0x21000-0x30fff]
>pci_bus 0001:00: resource 5 [mem 0xc20000000-0xc3fffffff]
>pci_bus 0001:01: resource 0 [io  0x21000-0x30fff]
>pci_bus 0001:01: resource 1 [mem 0xc20000000-0xc3fffffff]
>PCI: Probing PCI hardware done
>Setting up Freescale MSI support
>Setting up Freescale MSI support
>Setting up Freescale MSI support
>Freescale Elo series DMA driver
>fsl-elo-dma ffe100300.dma: #0 (fsl,eloplus-dma-channel), irq 28
>fsl-elo-dma ffe100300.dma: #1 (fsl,eloplus-dma-channel), irq 29
>fsl-elo-dma ffe100300.dma: #2 (fsl,eloplus-dma-channel), irq 30
>fsl-elo-dma ffe100300.dma: #3 (fsl,eloplus-dma-channel), irq 31
>fsl-elo-dma ffe101300.dma: #0 (fsl,eloplus-dma-channel), irq 32
>fsl-elo-dma ffe101300.dma: #1 (fsl,eloplus-dma-channel), irq 33
>fsl-elo-dma ffe101300.dma: #2 (fsl,eloplus-dma-channel), irq 34
>fsl-elo-dma ffe101300.dma: #3 (fsl,eloplus-dma-channel), irq 35
>vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
>vgaarb: loaded
>vgaarb: bridge control possible 0000:01:00.0
>SCSI subsystem initialized
>libata version 3.00 loaded.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>pps_core: LinuxPPS API ver. 1 registered
>pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
>PTP clock support registered
>EDAC MC: Ver: 3.0.0
>Switched to clocksource timebase
>NET: Registered protocol family 2
>TCP established hash table entries: 65536 (order: 7, 524288 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 65536 bind 65536)
>TCP: reno registered
>UDP hash table entries: 4096 (order: 5, 131072 bytes)
>UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
>NET: Registered protocol family 1
>RPC: Registered named UNIX socket transport module.
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>RPC: Registered tcp NFSv4.1 backchannel transport module.
>PCI: CLS 32 bytes, default 64
>Trying to unpack rootfs image as initramfs...
>rootfs image is not initramfs (no cpio magic); looks like an initrd
>Freeing initrd memory: 3700K (c00000002fc62000 - c00000002ffff000)
>futex hash table entries: 1024 (order: 4, 65536 bytes)
>HugeTLB registered 4 MB page size, pre-allocated 0 pages
>HugeTLB registered 16 MB page size, pre-allocated 0 pages
>HugeTLB registered 64 MB page size, pre-allocated 0 pages
>HugeTLB registered 256 MB page size, pre-allocated 0 pages
>HugeTLB registered 1 GB page size, pre-allocated 0 pages
>NFS: Registering the id_resolver key type
>Key type id_resolver registered
>Key type id_legacy registered
>ntfs: driver 2.1.31 [Flags: R/O].
>jffs2: version 2.2. (NAND) ï¿½Â© 2001-2006 Red Hat, Inc.
>msgmni has been set to 15981
>io scheduler noop registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>aer 0000:00:00.0:pcie02: service driver aer loaded
>aer 0001:00:00.0:pcie02: service driver aer loaded
>Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>console [ttyS0] disabled
>serial8250.0: ttyS0 at MMIO 0xffe11c500 (irq = 36, base_baud = 25000000) is a 16550A
>console [ttyS0] enabled
>console [ttyS0] enabled
>bootconsole [udbg0] disabled
>bootconsole [udbg0] disabled
>serial8250.0: ttyS1 at MMIO 0xffe11c600 (irq = 36, base_baud = 25000000) is a 16550A
>serial8250.0: ttyS2 at MMIO 0xffe11d500 (irq = 37, base_baud = 25000000) is a 16550A
>serial8250.0: ttyS3 at MMIO 0xffe11d600 (irq = 37, base_baud = 25000000) is a 16550A
>ePAPR hypervisor byte channel driver
>[drm] Initialized drm 1.1.0 20060810
>nouveau  [  DEVICE][0000:01:00.0] BOOT0  : 0x0d9000a1
>nouveau  [  DEVICE][0000:01:00.0] Chipset: GF119 (NVD9)
>nouveau  [  DEVICE][0000:01:00.0] Family : NVC0
>nouveau  [   VBIOS][0000:01:00.0] checking OpenFirmware for image...
>nouveau  [   VBIOS][0000:01:00.0] Unable to get the OF node
>nouveau  [   VBIOS][0000:01:00.0] ... signature not found
>nouveau  [   VBIOS][0000:01:00.0] checking PRAMIN for image...
>nouveau  [   VBIOS][0000:01:00.0] ... signature not found
>nouveau  [   VBIOS][0000:01:00.0] checking PROM for image...
>nouveau  [   VBIOS][0000:01:00.0] ... appears to be valid
>nouveau  [   VBIOS][0000:01:00.0] using image from PROM
>nouveau  [   VBIOS][0000:01:00.0] BIT signature found
>nouveau  [   VBIOS][0000:01:00.0] version 75.19.1b.00.01
>nouveau  [ DEVINIT][0000:01:00.0] adaptor not initialised
>nouveau  [   VBIOS][0000:01:00.0] running init tables
>nouveau  [     PMC][0000:01:00.0] MSI interrupts enabled
>nouveau W[     PFB][0000:01:00.0][0x00000000][c0000001fe455800] reclocking of this ram type unsupported
>nouveau  [     PFB][0000:01:00.0] RAM type: DDR3
>nouveau  [     PFB][0000:01:00.0] RAM size: 1024 MiB
>nouveau  [     PFB][0000:01:00.0]    ZCOMP: 0 tags
>nouveau  [    VOLT][0000:01:00.0] GPU voltage: 900000uv
>nouveau  [  PTHERM][0000:01:00.0] FAN control: PWM
>nouveau  [  PTHERM][0000:01:00.0] fan management: automatic
>nouveau  [  PTHERM][0000:01:00.0] internal sensor: yes
>nouveau  [     CLK][0000:01:00.0] 07: core 270 MHz memory 405 MHz 
>nouveau  [     CLK][0000:01:00.0] 0f: core 810 MHz memory 500 MHz 
>nouveau  [     CLK][0000:01:00.0] --: core 270 MHz memory 405 MHz 
>[TTM] Zone  kernel: Available graphics memory: 4091226 kiB
>[TTM] Zone   dma32: Available graphics memory: 2097152 kiB
>[TTM] Initializing pool allocator
>[TTM] Initializing DMA pool allocator
>nouveau  [     DRM] VRAM: 1024 MiB
>nouveau  [     DRM] GART: 1048576 MiB
>nouveau  [     DRM] TMDS table version 2.0
>nouveau  [     DRM] DCB version 4.0
>nouveau  [     DRM] DCB outp 00: 02000300 00000000
>nouveau  [     DRM] DCB outp 01: 01000302 00020030
>nouveau  [     DRM] DCB outp 02: 02011362 00020010
>nouveau  [     DRM] DCB outp 03: 04022310 00000000
>nouveau  [     DRM] DCB conn 00: 00001030
>nouveau  [     DRM] DCB conn 01: 00002161
>nouveau  [     DRM] DCB conn 02: 00000200
>[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
>[drm] Driver supports precise vblank timestamp query.
>nouveau  [     DRM] MM: using COPY0 for buffer copies
>nouveau 0000:01:00.0: No connectors reported connected with modes
>[drm] Cannot find any crtc or sizes - going 1024x768
>nouveau  [     DRM] allocated 1024x768 fb: 0x60000, bo c00000007e046c00
>nouveau E[   PFIFO][0000:01:00.0] PBDMA0: (unknown bits 0x00004000)
>nouveau E[   PFIFO][0000:01:00.0] PBDMA0: ch 1 [DRM] subc 0 mthd 0x0000 data 0x00000000
>nouveau E[   PFIFO][0000:01:00.0] PBDMA0: (unknown bits 0x00004000)
>nouveau E[   PFIFO][0000:01:00.0] PBDMA0: ch 1 [DRM] subc 0 mthd 0x0000 data 0x00000000
>nouveau E[   PFIFO][0000:01:00.0] PBDMA0: (unknown bits 0x00004000)
>nouveau E[   PFIFO][0000:01:00.0] PBDMA0: ch 1 [DRM] subc 0 mthd 0x0000 data 0x00000000
>nouveau E[   PFIFO][0000:01:00.0] PBDMA0: (unknown bits 0x00004000)
>nouveau E[   PFIFO][0000:01:00.0] PBDMA0: ch 1 [DRM] subc 0 mthd 0x0000 data 0x00000000
>nouveau E[   PFIFO][0000:01:00.0] read fault at 0x0000700000 [PAGE_NOT_PRESENT] from PFIFO/PFIFO on channel]
>nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
>nouveau 0000:01:00.0: registered panic notifier
>[drm] Initialized nouveau 1.2.1 20120801 for 0000:01:00.0 on minor 0
>brd: module loaded
>loop: module loaded
>fsl-sata ffe220000.sata: Sata FSL Platform/CSB Driver init
>scsi host0: sata_fsl
>ata1: SATA max UDMA/133 irq 68
>fsl-sata ffe221000.sata: Sata FSL Platform/CSB Driver init
>scsi host1: sata_fsl
>ata2: SATA max UDMA/133 irq 69
>fe8000000.flash: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x000001 Chip ID 0x002801
>Amd/Fujitsu Extended Query Table at 0x0040
>  Amd/Fujitsu Extended Query version 1.3.
>number of CFI chips: 1
>ftl_cs: FTL header not found.
>nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xdc
>nand: Micron MT29F4G08ABADAWP
>nand: 512MiB, SLC, page size: 2048, OOB size: 64
>nand: WARNING: fffa00000.flash: the ECC used on your system is too weak compared to the one required by thep
>Bad block table found at page 262080, version 0x01
>Bad block table found at page 262016, version 0x01
>6 ofpart partitions found on MTD device fffa00000.flash
>Creating 6 MTD partitions on "fffa00000.flash":
>0x000000000000-0x000002000000 : "NAND U-Boot Image"
>ftl_cs: FTL header not found.
>0x000002000000-0x000012000000 : "NAND Root File System"
>ftl_cs: FTL header not found.
>0x000012000000-0x00001a000000 : "NAND Compressed RFS Image"
>ftl_cs: FTL header not found.
>0x00001a000000-0x00001e000000 : "NAND Linux Kernel Image"
>ftl_cs: FTL header not found.
>0x00001e000000-0x00001f000000 : "NAND DTB Image"
>ftl_cs: FTL header not found.
>0x00001f000000-0x000020000000 : "NAND Writable User area"
>ftl_cs: FTL header not found.
>eLBC NAND device at 0xfffa00000, bank 2
>fsl_espi ffe110000.spi: cs=0, init_csmode=0x100008
>fsl_espi ffe110000.spi: master is unqueued, this is deprecated
>fsl_espi ffe110000.spi: at 0x80000800801d4000 (irq = 53)
>e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
>e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ehci-pci: EHCI PCI platform driver
>/soc@ffe000000/usb@210000: Invalid 'dr_mode' property, fallback to host mode
>fsl-ehci fsl-ehci.0: Freescale On-Chip EHCI Host Controller
>fsl-ehci fsl-ehci.0: new USB bus registered, assigned bus number 1
>fsl-ehci fsl-ehci.0: irq 44, io mem 0xffe210000
>fsl-ehci fsl-ehci.0: USB 2.0 started, EHCI 1.00
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 1 port detected
>fsl-ehci fsl-ehci.1: Freescale On-Chip EHCI Host Controller
>fsl-ehci fsl-ehci.1: new USB bus registered, assigned bus number 2
>fsl-ehci fsl-ehci.1: irq 45, io mem 0xffe211000
>fsl-ehci fsl-ehci.1: USB 2.0 started, EHCI 1.00
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 1 port detected
>usbcore: registered new interface driver usb-storage
>i2c /dev entries driver
>mpc-i2c ffe118100.i2c: timeout 1000000 us
>mpc-i2c ffe119100.i2c: timeout 1000000 us
>rtc-ds3232 13-0068: rtc core: registered ds3232 as rtc0
>mpc-i2c ffe118000.i2c: timeout 1000000 us
>mpc-i2c ffe119000.i2c: timeout 1000000 us
>sdhci: Secure Digital Host Controller Interface driver
>sdhci: Copyright(c) Pierre Ossman
>caam ffe300000.crypto: Entropy delay = 3200
>caam ffe300000.crypto: Instantiated RNG4 SH0
>caam ffe300000.crypto: Instantiated RNG4 SH1
>caam ffe300000.crypto: device ID = 0x0a13010000000000 (Era 5)
>caam ffe300000.crypto: job rings = 4, qi = 1
>caam algorithms registered in /proc/crypto
>caam_jr ffe301000.jr: registering rng-caam
>Freescale hypervisor management driver
>fsl-hv: no hypervisor found
>ipip: IPv4 over IPv4 tunneling driver
>TCP: cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 10
>sit: IPv6 over IPv4 tunneling driver
>NET: Registered protocol family 17
>NET: Registered protocol family 15
>Key type dns_resolver registered
>rtc-ds3232 13-0068: setting system clock to 2015-01-30 14:37:29 UTC (1422628649)
>ata1: No Device OR PHYRDY change,Hstatus = 0xa0000000
>ata1: SATA link down (SStatus 0 SControl 300)
>ata2: No Device OR PHYRDY change,Hstatus = 0xa0000000
>ata2: SATA link down (SStatus 0 SControl 300)
>RAMDISK: gzip image found at block 0
>VFS: Mounted root (ext2 filesystem) on device 1:0.
>devtmpfs: mounted
>Freeing unused kernel memory: 292K (c000000000a09000 - c000000000a52000)
>procd: Console is alive
>procd: - preinit -
>random: mktemp urandom read with 5 bits of entropy available
>Press the [f] key and hit [enter] to enter failsafe mode
>Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
>mount_root: mounting /dev/root
>procd: - early -
>procd: - ubus -
>procd: - init -
>Please press Enter to activate this console.
>procd: - init complete -
>
>
>
>BusyBox v1.19.4 (2014-03-13 15:57:26 MSK) built-in shell (ash)
>Enter 'help' for a list of built-in commands.
>
>  _______                     ________        __
> |       |.-----.-----.-----.|  |  |  |.----.|  |_
> |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
> |_______||   __|_____|__|__||________||__|  |____|
>          |__| W I R E L E S S   F R E E D O M
> -----------------------------------------------------
> BARRIER BREAKER (Bleeding Edge, r39583)
> -----------------------------------------------------
>  * 1/2 oz Galliano         Pour all ingredients into
>  * 4 oz cold Coffee        an irish coffee mug filled
>  * 1 1/2 oz Dark Rum       with crushed ice. Stir.
>  * 2 tsp. Creme de Cacao
> -----------------------------------------------------
>root@OpenWrt:/# ls -l /dev/f
>fb0   full
>

Actions: View

Attachments on bug 88868: 112941 | 112944 | 112945 | 112946 | 112947 | 112948 | 112952 | 112968 | 112969 | 112971 | 113026 | 113050 | 113202

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.