Attachment 136356 Details for Bug 104195 – dmesg with logging

dmesg with logging

dmesg_4.14.04_intelUpdated.txt (text/plain), 111.07 KB, created by Michael on 2017-12-21 23:54:57 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Michael

Created: 2017-12-21 23:54:57 UTC

Size: 111.07 KB

patch

obsolete

>[    0.000000] Linux version 4.14.4-041404-generic (kernel@tangerine) (gcc version 7.2.0 (Ubuntu 7.2.0-8ubuntu3)) #201712050630 SMP Tue Dec 5 11:34:06 UTC 2017
>[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.14.4-041404-generic root=UUID=54fcf666-19f5-438b-ab47-fd6d463bd7e3 ro text drm.debug=0xe
>[    0.000000] KERNEL supported cpus:
>[    0.000000]   Intel GenuineIntel
>[    0.000000]   AMD AuthenticAMD
>[    0.000000]   Centaur CentaurHauls
>[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
>[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
>[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
>[    0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
>[    0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
>[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
>[    0.000000] x86/fpu: xstate_offset[3]:  832, xstate_sizes[3]:   64
>[    0.000000] x86/fpu: xstate_offset[4]:  896, xstate_sizes[4]:   64
>[    0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
>[    0.000000] e820: BIOS-provided physical RAM map:
>[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
>[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009cfff] usable
>[    0.000000] BIOS-e820: [mem 0x000000000009d000-0x00000000000fffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000af256fff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000af257000-0x00000000af258fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000af259000-0x00000000afe8afff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000afe8b000-0x00000000afe8bfff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000afe8c000-0x00000000c3e7efff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000c3e7f000-0x00000000c3e7ffff] ACPI NVS
>[    0.000000] BIOS-e820: [mem 0x00000000c3e80000-0x00000000c3e80fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000c3e81000-0x00000000cd7b8fff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000cd7b9000-0x00000000cd880fff] type 20
>[    0.000000] BIOS-e820: [mem 0x00000000cd881000-0x00000000cfe99fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000cfe9a000-0x00000000cff99fff] ACPI NVS
>[    0.000000] BIOS-e820: [mem 0x00000000cff9a000-0x00000000cfffefff] ACPI data
>[    0.000000] BIOS-e820: [mem 0x00000000cffff000-0x00000000cfffffff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000d0000000-0x00000000d7ffffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000d8600000-0x00000000dc7fffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fe010000-0x00000000fe010fff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000002227fffff] usable
>[    0.000000] NX (Execute Disable) protection: active
>[    0.000000] efi: EFI v2.50 by Lenovo
>[    0.000000] efi:  SMBIOS=0xcf07e000  SMBIOS 3.0=0xcf07b000  ACPI=0xcfffe000  ACPI 2.0=0xcfffe014  ESRT=0xceef6000  MEMATTR=0xc87ba018 
>[    0.000000] random: fast init done
>[    0.000000] SMBIOS 3.0.0 present.
>[    0.000000] DMI: LENOVO 20J6001AMX/20J6001AMX, BIOS R0FET37W (1.17 ) 09/28/2017
>[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
>[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
>[    0.000000] e820: last_pfn = 0x222800 max_arch_pfn = 0x400000000
>[    0.000000] MTRR default type: write-back
>[    0.000000] MTRR fixed ranges enabled:
>[    0.000000]   00000-9FFFF write-back
>[    0.000000]   A0000-BFFFF uncachable
>[    0.000000]   C0000-FFFFF write-protect
>[    0.000000] MTRR variable ranges enabled:
>[    0.000000]   0 base 00E0000000 mask 7FE0000000 uncachable
>[    0.000000]   1 base 00DC000000 mask 7FFC000000 uncachable
>[    0.000000]   2 base 00DA000000 mask 7FFE000000 uncachable
>[    0.000000]   3 disabled
>[    0.000000]   4 disabled
>[    0.000000]   5 disabled
>[    0.000000]   6 disabled
>[    0.000000]   7 disabled
>[    0.000000]   8 disabled
>[    0.000000]   9 disabled
>[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
>[    0.000000] e820: last_pfn = 0xd0000 max_arch_pfn = 0x400000000
>[    0.000000] esrt: Reserving ESRT space from 0x00000000ceef6000 to 0x00000000ceef6088.
>[    0.000000] Scanning 1 areas for low memory corruption
>[    0.000000] Base memory trampoline at [ffff995780097000] 97000 size 24576
>[    0.000000] Using GB pages for direct mapping
>[    0.000000] BRK [0x1dd72c000, 0x1dd72cfff] PGTABLE
>[    0.000000] BRK [0x1dd72d000, 0x1dd72dfff] PGTABLE
>[    0.000000] BRK [0x1dd72e000, 0x1dd72efff] PGTABLE
>[    0.000000] BRK [0x1dd72f000, 0x1dd72ffff] PGTABLE
>[    0.000000] BRK [0x1dd730000, 0x1dd730fff] PGTABLE
>[    0.000000] BRK [0x1dd731000, 0x1dd731fff] PGTABLE
>[    0.000000] BRK [0x1dd732000, 0x1dd732fff] PGTABLE
>[    0.000000] BRK [0x1dd733000, 0x1dd733fff] PGTABLE
>[    0.000000] BRK [0x1dd734000, 0x1dd734fff] PGTABLE
>[    0.000000] BRK [0x1dd735000, 0x1dd735fff] PGTABLE
>[    0.000000] BRK [0x1dd736000, 0x1dd736fff] PGTABLE
>[    0.000000] BRK [0x1dd737000, 0x1dd737fff] PGTABLE
>[    0.000000] Secure boot could not be determined
>[    0.000000] RAMDISK: [mem 0x32a5f000-0x35526fff]
>[    0.000000] ACPI: Early table checksum verification disabled
>[    0.000000] ACPI: RSDP 0x00000000CFFFE014 000024 (v02 LENOVO)
>[    0.000000] ACPI: XSDT 0x00000000CFFC3188 0000F4 (v01 LENOVO TP-R0F   00001170 PTEC 00000002)
>[    0.000000] ACPI: FACP 0x00000000CFFF5000 0000F4 (v05 LENOVO TP-R0F   00001170 PTEC 00000002)
>[    0.000000] ACPI: DSDT 0x00000000CFFD1000 01F61F (v02 LENOVO SKL      00000000 INTL 20160527)
>[    0.000000] ACPI: FACS 0x00000000CFF3D000 000040
>[    0.000000] ACPI: SSDT 0x00000000CFFFC000 0003CC (v02 LENOVO Tpm2Tabl 00001000 INTL 20160527)
>[    0.000000] ACPI: TPM2 0x00000000CFFFB000 000034 (v03 LENOVO TP-R0F   00001170 PTEC 00000002)
>[    0.000000] ACPI: UEFI 0x00000000CFF53000 000042 (v01 LENOVO TP-R0F   00001170 PTEC 00000002)
>[    0.000000] ACPI: SSDT 0x00000000CFFF7000 003235 (v02 LENOVO SaSsdt   00003000 INTL 20160527)
>[    0.000000] ACPI: SSDT 0x00000000CFFF6000 0005B6 (v02 LENOVO PerfTune 00001000 INTL 20160527)
>[    0.000000] ACPI: HPET 0x00000000CFFF4000 000038 (v01 LENOVO TP-R0F   00001170 PTEC 00000002)
>[    0.000000] ACPI: APIC 0x00000000CFFF3000 0000BC (v03 LENOVO TP-R0F   00001170 PTEC 00000002)
>[    0.000000] ACPI: MCFG 0x00000000CFFF2000 00003C (v01 LENOVO TP-R0F   00001170 PTEC 00000002)
>[    0.000000] ACPI: ECDT 0x00000000CFFF1000 000053 (v01 LENOVO TP-R0F   00001170 PTEC 00000002)
>[    0.000000] ACPI: SSDT 0x00000000CFFCF000 0019E1 (v02 LENOVO ProjSsdt 00000010 INTL 20160527)
>[    0.000000] ACPI: BOOT 0x00000000CFFCE000 000028 (v01 LENOVO TP-R0F   00001170 PTEC 00000002)
>[    0.000000] ACPI: BATB 0x00000000CFFCD000 00004A (v02 LENOVO TP-R0F   00001170 PTEC 00000002)
>[    0.000000] ACPI: SLIC 0x00000000CFFCC000 000176 (v01 LENOVO TP-R0F   00001170 PTEC 00000002)
>[    0.000000] ACPI: SSDT 0x00000000CFFCA000 0017AE (v02 LENOVO CpuSsdt  00003000 INTL 20160527)
>[    0.000000] ACPI: SSDT 0x00000000CFFC9000 00056D (v02 LENOVO CtdpB    00001000 INTL 20160527)
>[    0.000000] ACPI: WSMT 0x00000000CFFC8000 000028 (v01 LENOVO TP-R0F   00001170 PTEC 00000002)
>[    0.000000] ACPI: SSDT 0x00000000CFFC7000 000141 (v02 LENOVO HdaDsp   00000000 INTL 20160527)
>[    0.000000] ACPI: SSDT 0x00000000CFFC6000 0004C5 (v02 LENOVO TbtTypeC 00000000 INTL 20160527)
>[    0.000000] ACPI: DBGP 0x00000000CFFC5000 000034 (v01 LENOVO TP-R0F   00001170 PTEC 00000002)
>[    0.000000] ACPI: DBG2 0x00000000CFFC4000 000054 (v00 LENOVO TP-R0F   00001170 PTEC 00000002)
>[    0.000000] ACPI: MSDM 0x00000000CFFFD000 000055 (v03 LENOVO TP-R0F   00001170 PTEC 00000002)
>[    0.000000] ACPI: ASF! 0x00000000CFFC2000 0000A0 (v32 LENOVO TP-R0F   00001170 PTEC 00000002)
>[    0.000000] ACPI: FPDT 0x00000000CFFC1000 000044 (v01 LENOVO TP-R0F   00001170 PTEC 00000002)
>[    0.000000] ACPI: BGRT 0x00000000CFFC0000 000038 (v01 LENOVO TP-R0F   00001170 PTEC 00000002)
>[    0.000000] ACPI: UEFI 0x00000000CFF3B000 00013E (v01 LENOVO TP-R0F   00001170 PTEC 00000002)
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] No NUMA configuration found
>[    0.000000] Faking a node at [mem 0x0000000000000000-0x00000002227fffff]
>[    0.000000] NODE_DATA(0) allocated [mem 0x2227d5000-0x2227fffff]
>[    0.000000] Zone ranges:
>[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
>[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
>[    0.000000]   Normal   [mem 0x0000000100000000-0x00000002227fffff]
>[    0.000000]   Device   empty
>[    0.000000] Movable zone start for each node
>[    0.000000] Early memory node ranges
>[    0.000000]   node   0: [mem 0x0000000000001000-0x0000000000057fff]
>[    0.000000]   node   0: [mem 0x0000000000059000-0x000000000009cfff]
>[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000af256fff]
>[    0.000000]   node   0: [mem 0x00000000af259000-0x00000000afe8afff]
>[    0.000000]   node   0: [mem 0x00000000afe8c000-0x00000000c3e7efff]
>[    0.000000]   node   0: [mem 0x00000000c3e81000-0x00000000cd7b8fff]
>[    0.000000]   node   0: [mem 0x00000000cffff000-0x00000000cfffffff]
>[    0.000000]   node   0: [mem 0x0000000100000000-0x00000002227fffff]
>[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000002227fffff]
>[    0.000000] On node 0 totalpages: 2031440
>[    0.000000]   DMA zone: 64 pages used for memmap
>[    0.000000]   DMA zone: 22 pages reserved
>[    0.000000]   DMA zone: 3995 pages, LIFO batch:0
>[    0.000000]   DMA32 zone: 13087 pages used for memmap
>[    0.000000]   DMA32 zone: 837557 pages, LIFO batch:31
>[    0.000000]   Normal zone: 18592 pages used for memmap
>[    0.000000]   Normal zone: 1189888 pages, LIFO batch:31
>[    0.000000] Reserving Intel graphics memory at 0x00000000da800000-0x00000000dc7fffff
>[    0.000000] ACPI: PM-Timer IO Port: 0x1808
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
>[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>[    0.000000] ACPI: IRQ0 used by override.
>[    0.000000] ACPI: IRQ9 used by override.
>[    0.000000] Using ACPI (MADT) for SMP configuration information
>[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
>[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
>[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
>[    0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
>[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x000fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xaf257000-0xaf258fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xafe8b000-0xafe8bfff]
>[    0.000000] PM: Registered nosave memory: [mem 0xc3e7f000-0xc3e7ffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xc3e80000-0xc3e80fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xcd7b9000-0xcd880fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xcd881000-0xcfe99fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xcfe9a000-0xcff99fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xcff9a000-0xcfffefff]
>[    0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xd7ffffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xd8000000-0xd85fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xd8600000-0xdc7fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xdc800000-0xf7ffffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfe00ffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfe010000-0xfe010fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfe011000-0xffffffff]
>[    0.000000] e820: [mem 0xdc800000-0xf7ffffff] available for PCI devices
>[    0.000000] Booting paravirtualized kernel on bare hardware
>[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
>[    0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
>[    0.000000] percpu: Embedded 39 pages/cpu @ffff9959a2400000 s119768 r8192 d31784 u524288
>[    0.000000] pcpu-alloc: s119768 r8192 d31784 u524288 alloc=1*2097152
>[    0.000000] pcpu-alloc: [0] 0 1 2 3 
>[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 1999675
>[    0.000000] Policy zone: Normal
>[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.14.4-041404-generic root=UUID=54fcf666-19f5-438b-ab47-fd6d463bd7e3 ro text drm.debug=0xe
>[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
>[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
>[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>[    0.000000] Memory: 7769052K/8125760K available (9610K kernel code, 2488K rwdata, 4132K rodata, 2328K init, 2404K bss, 356708K reserved, 0K cma-reserved)
>[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
>[    0.000000] ftrace: allocating 38352 entries in 150 pages
>[    0.000000] Hierarchical RCU implementation.
>[    0.000000] 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
>[    0.000000] 	Tasks RCU enabled.
>[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
>[    0.000000] NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 16
>[    0.000000] Console: colour dummy device 80x25
>[    0.000000] console [tty0] enabled
>[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
>[    0.000000] hpet clockevent registered
>[    0.004000] tsc: Detected 2500.000 MHz processor
>[    0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4992.00 BogoMIPS (lpj=9984000)
>[    0.004000] pid_max: default: 32768 minimum: 301
>[    0.004000] ACPI: Core revision 20170728
>[    0.076216] ACPI Error: [\_SB_.PCI0.XHC_.RHUB.HS11] Namespace lookup failure, AE_NOT_FOUND (20170728/dswload-210)
>[    0.076228] ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20170728/psobject-252)
>[    0.076457] ACPI Exception: AE_NOT_FOUND, (SSDT:ProjSsdt) while loading table (20170728/tbxfload-228)
>[    0.079265] ACPI Error: 1 table load failures, 8 successful (20170728/tbxfload-246)
>[    0.080059] Security Framework initialized
>[    0.080063] Yama: becoming mindful.
>[    0.080070] SELinux:  Disabled at boot.
>[    0.080073] AppArmor: AppArmor disabled by boot time parameter
>[    0.081402] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
>[    0.082059] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
>[    0.082091] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
>[    0.082115] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
>[    0.082371] CPU: Physical Processor ID: 0
>[    0.082374] CPU: Processor Core ID: 0
>[    0.082381] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
>[    0.082383] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
>[    0.082391] mce: CPU supports 10 MCE banks
>[    0.082406] CPU0: Thermal monitoring enabled (TM1)
>[    0.082438] process: using mwait in idle threads
>[    0.082443] Last level iTLB entries: 4KB 128, 2MB 8, 4MB 8
>[    0.082446] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
>[    0.083082] Freeing SMP alternatives memory: 36K
>[    0.089198] smpboot: Max logical packages: 1
>[    0.090420] x2apic: IRQ remapping doesn't support X2APIC mode
>[    0.094698] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>[    0.134430] TSC deadline timer enabled
>[    0.134435] smpboot: CPU0: Intel(R) Core(TM) i5-7300HQ CPU @ 2.50GHz (family: 0x6, model: 0x9e, stepping: 0x9)
>[    0.134504] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
>[    0.134550] ... version:                4
>[    0.134552] ... bit width:              48
>[    0.134554] ... generic registers:      8
>[    0.134556] ... value mask:             0000ffffffffffff
>[    0.134558] ... max period:             00007fffffffffff
>[    0.134560] ... fixed-purpose events:   3
>[    0.134562] ... event mask:             00000007000000ff
>[    0.134609] Hierarchical SRCU implementation.
>[    0.135655] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
>[    0.135672] smp: Bringing up secondary CPUs ...
>[    0.135750] x86: Booting SMP configuration:
>[    0.135753] .... node  #0, CPUs:      #1 #2 #3
>[    0.136000] smp: Brought up 1 node, 4 CPUs
>[    0.136000] smpboot: Total of 4 processors activated (19968.00 BogoMIPS)
>[    0.136261] devtmpfs: initialized
>[    0.136261] x86/mm: Memory block size: 128MB
>[    0.136852] evm: security.selinux
>[    0.136855] evm: security.SMACK64
>[    0.136857] evm: security.SMACK64EXEC
>[    0.136859] evm: security.SMACK64TRANSMUTE
>[    0.136861] evm: security.SMACK64MMAP
>[    0.136862] evm: security.ima
>[    0.136864] evm: security.capability
>[    0.136884] PM: Registering ACPI NVS region [mem 0xc3e7f000-0xc3e7ffff] (4096 bytes)
>[    0.136884] PM: Registering ACPI NVS region [mem 0xcfe9a000-0xcff99fff] (1048576 bytes)
>[    0.136884] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
>[    0.136884] futex hash table entries: 1024 (order: 4, 65536 bytes)
>[    0.136884] pinctrl core: initialized pinctrl subsystem
>[    0.136884] RTC time: 23:03:38, date: 12/21/17
>[    0.136884] NET: Registered protocol family 16
>[    0.136884] cpuidle: using governor ladder
>[    0.136884] cpuidle: using governor menu
>[    0.136884] Simple Boot Flag at 0x47 set to 0x1
>[    0.136884] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
>[    0.136884] ACPI: bus type PCI registered
>[    0.136884] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
>[    0.136884] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
>[    0.136884] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
>[    0.136884] PCI: Using configuration type 1 for base access
>[    0.140025] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
>[    0.140025] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
>[    0.140087] ACPI: Added _OSI(Module Device)
>[    0.140091] ACPI: Added _OSI(Processor Device)
>[    0.140093] ACPI: Added _OSI(3.0 _SCP Extensions)
>[    0.140096] ACPI: Added _OSI(Processor Aggregator Device)
>[    0.140100] ACPI: EC: EC started
>[    0.140102] ACPI: EC: interrupt blocked
>[    0.142920] ACPI: \: Used as first EC
>[    0.142924] ACPI: \: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62
>[    0.142927] ACPI: \: Used as boot ECDT EC to handle transactions
>[    0.145066] ACPI: Executed 24 blocks of module-level executable AML code
>[    0.158181] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
>[    0.167387] ACPI: Dynamic OEM Table Load:
>[    0.167410] ACPI: SSDT 0xFFFF995998FA4000 0005EE (v02 PmRef  Cpu0Ist  00003000 INTL 20160527)
>[    0.167732] ACPI: Executed 1 blocks of module-level executable AML code
>[    0.167895] ACPI: \_PR_.PR00: _OSC native thermal LVT Acked
>[    0.169726] ACPI: Dynamic OEM Table Load:
>[    0.169740] ACPI: SSDT 0xFFFF995998A1BC00 0003FF (v02 PmRef  Cpu0Cst  00003001 INTL 20160527)
>[    0.170018] ACPI: Executed 1 blocks of module-level executable AML code
>[    0.170333] ACPI: Dynamic OEM Table Load:
>[    0.170343] ACPI: SSDT 0xFFFF9959989FBA80 0000BA (v02 PmRef  Cpu0Hwp  00003000 INTL 20160527)
>[    0.170568] ACPI: Executed 1 blocks of module-level executable AML code
>[    0.170798] ACPI: Dynamic OEM Table Load:
>[    0.170809] ACPI: SSDT 0xFFFF995998FA7000 000628 (v02 PmRef  HwpLvt   00003000 INTL 20160527)
>[    0.171022] ACPI: Executed 1 blocks of module-level executable AML code
>[    0.171930] ACPI: Dynamic OEM Table Load:
>[    0.171946] ACPI: SSDT 0xFFFF995998A40000 000D14 (v02 PmRef  ApIst    00003000 INTL 20160527)
>[    0.177402] ACPI: Executed 1 blocks of module-level executable AML code
>[    0.177726] ACPI: Dynamic OEM Table Load:
>[    0.177737] ACPI: SSDT 0xFFFF995998A1A800 000317 (v02 PmRef  ApHwp    00003000 INTL 20160527)
>[    0.178099] ACPI: Executed 1 blocks of module-level executable AML code
>[    0.178435] ACPI: Dynamic OEM Table Load:
>[    0.178445] ACPI: SSDT 0xFFFF995998A19400 00030A (v02 PmRef  ApCst    00003000 INTL 20160527)
>[    0.178812] ACPI: Executed 1 blocks of module-level executable AML code
>[    0.181244] ACPI: Interpreter enabled
>[    0.181324] ACPI: (supports S0 S3 S4 S5)
>[    0.181327] ACPI: Using IOAPIC for interrupt routing
>[    0.181391] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>[    0.182432] ACPI: Enabled 6 GPEs in block 00 to 7F
>[    0.188411] ACPI: Power Resource [PUBS] (on)
>[    0.196644] ACPI: Power Resource [WRST] (on)
>[    0.196904] ACPI: Power Resource [WRST] (on)
>[    0.222065] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
>[    0.222077] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
>[    0.227711] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
>[    0.227716] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
>[    0.231828] PCI host bridge to bus 0000:00
>[    0.231833] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
>[    0.231837] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
>[    0.231841] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
>[    0.231844] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
>[    0.231848] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
>[    0.231851] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
>[    0.231854] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
>[    0.231857] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
>[    0.231861] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
>[    0.231864] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
>[    0.231867] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
>[    0.231871] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
>[    0.231874] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
>[    0.231877] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
>[    0.231880] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
>[    0.231883] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
>[    0.231887] pci_bus 0000:00: root bus resource [mem 0xdc800000-0xf7ffffff window]
>[    0.231890] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
>[    0.231894] pci_bus 0000:00: root bus resource [bus 00-3e]
>[    0.231906] pci 0000:00:00.0: [8086:5910] type 00 class 0x060000
>[    0.233494] pci 0000:00:02.0: [8086:591b] type 00 class 0x030000
>[    0.233509] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf0ffffff 64bit]
>[    0.233517] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
>[    0.233522] pci 0000:00:02.0: reg 0x20: [io  0xe000-0xe03f]
>[    0.233543] pci 0000:00:02.0: BAR 2: assigned to efifb
>[    0.235204] pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330
>[    0.235235] pci 0000:00:14.0: reg 0x10: [mem 0xf1320000-0xf132ffff 64bit]
>[    0.235331] pci 0000:00:14.0: PME# supported from D3hot D3cold
>[    0.237071] pci 0000:00:14.2: [8086:a131] type 00 class 0x118000
>[    0.237107] pci 0000:00:14.2: reg 0x10: [mem 0xf1348000-0xf1348fff 64bit]
>[    0.238738] pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000
>[    0.238772] pci 0000:00:16.0: reg 0x10: [mem 0xf1349000-0xf1349fff 64bit]
>[    0.238864] pci 0000:00:16.0: PME# supported from D3hot
>[    0.240546] pci 0000:00:1c.0: [8086:a110] type 01 class 0x060400
>[    0.240669] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>[    0.242357] pci 0000:00:1c.4: [8086:a114] type 01 class 0x060400
>[    0.242509] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
>[    0.244203] pci 0000:00:1d.0: [8086:a118] type 01 class 0x060400
>[    0.244333] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
>[    0.246038] pci 0000:00:1f.0: [8086:a153] type 00 class 0x060100
>[    0.247797] pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000
>[    0.247818] pci 0000:00:1f.2: reg 0x10: [mem 0xf1344000-0xf1347fff]
>[    0.249531] pci 0000:00:1f.3: [8086:a171] type 00 class 0x040300
>[    0.249567] pci 0000:00:1f.3: reg 0x10: [mem 0xf1340000-0xf1343fff 64bit]
>[    0.249609] pci 0000:00:1f.3: reg 0x20: [mem 0xf1330000-0xf133ffff 64bit]
>[    0.249679] pci 0000:00:1f.3: PME# supported from D3hot D3cold
>[    0.251354] pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500
>[    0.251411] pci 0000:00:1f.4: reg 0x10: [mem 0xf134a000-0xf134a0ff 64bit]
>[    0.251463] pci 0000:00:1f.4: reg 0x20: [io  0xefa0-0xefbf]
>[    0.253177] pci 0000:00:1f.6: [8086:15d6] type 00 class 0x020000
>[    0.253210] pci 0000:00:1f.6: reg 0x10: [mem 0xf1300000-0xf131ffff]
>[    0.253342] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
>[    0.255564] pci 0000:03:00.0: [8086:24fd] type 00 class 0x028000
>[    0.255821] pci 0000:03:00.0: reg 0x10: [mem 0xf1200000-0xf1201fff 64bit]
>[    0.257173] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
>[    0.268521] pci 0000:00:1c.0: PCI bridge to [bus 03]
>[    0.268532] pci 0000:00:1c.0:   bridge window [mem 0xf1200000-0xf12fffff]
>[    0.268756] pci 0000:04:00.0: [10ec:522a] type 00 class 0xff0000
>[    0.268877] pci 0000:04:00.0: reg 0x10: [mem 0xf1100000-0xf1100fff]
>[    0.269314] pci 0000:04:00.0: supports D1 D2
>[    0.269316] pci 0000:04:00.0: PME# supported from D1 D2 D3hot D3cold
>[    0.280163] pci 0000:00:1c.4: PCI bridge to [bus 04]
>[    0.280173] pci 0000:00:1c.4:   bridge window [mem 0xf1100000-0xf11fffff]
>[    0.280478] pci 0000:05:00.0: [144d:a804] type 00 class 0x010802
>[    0.280521] pci 0000:05:00.0: reg 0x10: [mem 0xf1000000-0xf1003fff 64bit]
>[    0.292243] pci 0000:00:1d.0: PCI bridge to [bus 05]
>[    0.292254] pci 0000:00:1d.0:   bridge window [mem 0xf1000000-0xf10fffff]
>[    0.294968] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
>[    0.295104] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
>[    0.295237] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
>[    0.295369] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
>[    0.295493] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
>[    0.295613] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
>[    0.295732] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
>[    0.295852] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
>[    0.296652] ACPI: EC: interrupt unblocked
>[    0.296683] ACPI: EC: event unblocked
>[    0.296700] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62
>[    0.296704] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events
>[    0.296791] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=mem,locks=none
>[    0.296791] pci 0000:00:02.0: vgaarb: setting as boot device
>[    0.296791] pci 0000:00:02.0: vgaarb: bridge control possible
>[    0.296791] vgaarb: loaded
>[    0.296791] SCSI subsystem initialized
>[    0.296791] libata version 3.00 loaded.
>[    0.296791] ACPI: bus type USB registered
>[    0.296791] usbcore: registered new interface driver usbfs
>[    0.296791] usbcore: registered new interface driver hub
>[    0.296791] usbcore: registered new device driver usb
>[    0.296791] EDAC MC: Ver: 3.0.0
>[    0.296791] Registered efivars operations
>[    0.324487] PCI: Using ACPI for IRQ routing
>[    0.331249] PCI: pci_cache_line_size set to 64 bytes
>[    0.332281] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
>[    0.332282] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
>[    0.332283] e820: reserve RAM buffer [mem 0xaf257000-0xafffffff]
>[    0.332285] e820: reserve RAM buffer [mem 0xafe8b000-0xafffffff]
>[    0.332286] e820: reserve RAM buffer [mem 0xc3e7f000-0xc3ffffff]
>[    0.332287] e820: reserve RAM buffer [mem 0xcd7b9000-0xcfffffff]
>[    0.332289] e820: reserve RAM buffer [mem 0x222800000-0x223ffffff]
>[    0.332389] NetLabel: Initializing
>[    0.332392] NetLabel:  domain hash size = 128
>[    0.332394] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
>[    0.332416] NetLabel:  unlabeled traffic allowed by default
>[    0.332435] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
>[    0.332435] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
>[    0.334174] clocksource: Switched to clocksource hpet
>[    0.344919] VFS: Disk quotas dquot_6.6.0
>[    0.344940] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>[    0.345011] pnp: PnP ACPI init
>[    0.345233] system 00:00: [mem 0xfd000000-0xfdabffff] has been reserved
>[    0.345238] system 00:00: [mem 0xfdad0000-0xfdadffff] has been reserved
>[    0.345241] system 00:00: [mem 0xfdb00000-0xfdffffff] has been reserved
>[    0.345245] system 00:00: [mem 0xfe000000-0xfe01ffff] could not be reserved
>[    0.345248] system 00:00: [mem 0xfe036000-0xfe03bfff] has been reserved
>[    0.345252] system 00:00: [mem 0xfe03d000-0xfe3fffff] has been reserved
>[    0.345255] system 00:00: [mem 0xfe410000-0xfe7fffff] has been reserved
>[    0.345264] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.345779] system 00:01: [io  0xff00-0xfffe] has been reserved
>[    0.345786] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.346292] system 00:02: [io  0x0680-0x069f] has been reserved
>[    0.346298] system 00:02: [io  0xffff] has been reserved
>[    0.346302] system 00:02: [io  0xffff] has been reserved
>[    0.346305] system 00:02: [io  0xffff] has been reserved
>[    0.346308] system 00:02: [io  0x1800-0x18fe] has been reserved
>[    0.346311] system 00:02: [io  0x164e-0x164f] has been reserved
>[    0.346318] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.346472] system 00:03: [io  0x0800-0x087f] has been reserved
>[    0.346478] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.346506] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
>[    0.346562] system 00:05: [io  0x1854-0x1857] has been reserved
>[    0.346568] system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
>[    0.346599] pnp 00:06: Plug and Play ACPI device, IDs LEN0071 PNP0303 (active)
>[    0.346622] pnp 00:07: Plug and Play ACPI device, IDs LEN2045 PNP0f13 (active)
>[    0.346780] system 00:08: [io  0x1800-0x189f] could not be reserved
>[    0.346785] system 00:08: [io  0x0800-0x087f] has been reserved
>[    0.346789] system 00:08: [io  0x0880-0x08ff] has been reserved
>[    0.346792] system 00:08: [io  0x0900-0x097f] has been reserved
>[    0.346795] system 00:08: [io  0x0980-0x09ff] has been reserved
>[    0.346798] system 00:08: [io  0x0a00-0x0a7f] has been reserved
>[    0.346801] system 00:08: [io  0x0a80-0x0aff] has been reserved
>[    0.346804] system 00:08: [io  0x0b00-0x0b7f] has been reserved
>[    0.346807] system 00:08: [io  0x0b80-0x0bff] has been reserved
>[    0.346811] system 00:08: [io  0x15e0-0x15ef] has been reserved
>[    0.346814] system 00:08: [io  0x1600-0x167f] could not be reserved
>[    0.346817] system 00:08: [io  0x1640-0x165f] could not be reserved
>[    0.346821] system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved
>[    0.346825] system 00:08: [mem 0xfed10000-0xfed13fff] has been reserved
>[    0.346829] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
>[    0.346832] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
>[    0.346835] system 00:08: [mem 0xfeb00000-0xfebfffff] has been reserved
>[    0.346839] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
>[    0.346843] system 00:08: [mem 0xfed90000-0xfed93fff] has been reserved
>[    0.346846] system 00:08: [mem 0xf7fe0000-0xf7ffffff] has been reserved
>[    0.346852] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.349225] system 00:09: [mem 0xfdaf0000-0xfdafffff] has been reserved
>[    0.349231] system 00:09: [mem 0xfdae0000-0xfdaeffff] has been reserved
>[    0.349234] system 00:09: [mem 0xfdac0000-0xfdacffff] has been reserved
>[    0.349241] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.350300] system 00:0a: [mem 0xfed10000-0xfed17fff] could not be reserved
>[    0.350305] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
>[    0.350308] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
>[    0.350312] system 00:0a: [mem 0xf8000000-0xfbffffff] has been reserved
>[    0.350315] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
>[    0.350318] system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved
>[    0.350322] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
>[    0.350325] system 00:0a: [mem 0xff000000-0xffffffff] has been reserved
>[    0.350328] system 00:0a: [mem 0xfee00000-0xfeefffff] has been reserved
>[    0.350332] system 00:0a: [mem 0xf7fe0000-0xf7ffffff] has been reserved
>[    0.350338] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.350885] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
>[    0.350889] system 00:0b: [mem 0x000f0000-0x000fffff] could not be reserved
>[    0.350893] system 00:0b: [mem 0x00100000-0xdc7fffff] could not be reserved
>[    0.350897] system 00:0b: [mem 0xfec00000-0xfed3ffff] could not be reserved
>[    0.350900] system 00:0b: [mem 0xfed4c000-0xffffffff] could not be reserved
>[    0.350906] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
>[    0.351070] pnp: PnP ACPI: found 12 devices
>[    0.360039] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
>[    0.360096] pci 0000:00:1c.0: PCI bridge to [bus 03]
>[    0.360110] pci 0000:00:1c.0:   bridge window [mem 0xf1200000-0xf12fffff]
>[    0.360124] pci 0000:00:1c.4: PCI bridge to [bus 04]
>[    0.360132] pci 0000:00:1c.4:   bridge window [mem 0xf1100000-0xf11fffff]
>[    0.360145] pci 0000:00:1d.0: PCI bridge to [bus 05]
>[    0.360154] pci 0000:00:1d.0:   bridge window [mem 0xf1000000-0xf10fffff]
>[    0.360168] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
>[    0.360170] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
>[    0.360171] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
>[    0.360173] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
>[    0.360174] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
>[    0.360175] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
>[    0.360177] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
>[    0.360178] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
>[    0.360180] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
>[    0.360181] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
>[    0.360182] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
>[    0.360183] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
>[    0.360185] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
>[    0.360186] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
>[    0.360187] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
>[    0.360189] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window]
>[    0.360190] pci_bus 0000:00: resource 20 [mem 0xdc800000-0xf7ffffff window]
>[    0.360191] pci_bus 0000:00: resource 21 [mem 0xfd000000-0xfe7fffff window]
>[    0.360193] pci_bus 0000:03: resource 1 [mem 0xf1200000-0xf12fffff]
>[    0.360194] pci_bus 0000:04: resource 1 [mem 0xf1100000-0xf11fffff]
>[    0.360196] pci_bus 0000:05: resource 1 [mem 0xf1000000-0xf10fffff]
>[    0.360434] NET: Registered protocol family 2
>[    0.360641] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
>[    0.360785] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>[    0.360924] TCP: Hash tables configured (established 65536 bind 65536)
>[    0.360960] UDP hash table entries: 4096 (order: 5, 131072 bytes)
>[    0.360989] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
>[    0.361062] NET: Registered protocol family 1
>[    0.361078] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
>[    0.362058] PCI: CLS 0 bytes, default 64
>[    0.362097] Unpacking initramfs...
>[    1.351175] Freeing initrd memory: 43808K
>[    1.351206] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>[    1.351211] software IO TLB [mem 0xbafba000-0xbefba000] (64MB) mapped at [ffff99583afba000-ffff99583efb9fff]
>[    1.351401] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23fa772cf26, max_idle_ns: 440795269835 ns
>[    1.351584] Scanning for low memory corruption every 60 seconds
>[    1.351993] audit: initializing netlink subsys (disabled)
>[    1.352106] audit: type=2000 audit(1513897418.352:1): state=initialized audit_enabled=0 res=1
>[    1.352628] Initialise system trusted keyrings
>[    1.352640] Key type blacklist registered
>[    1.352710] workingset: timestamp_bits=36 max_order=21 bucket_order=0
>[    1.354055] zbud: loaded
>[    1.354504] squashfs: version 4.0 (2009/01/31) Phillip Lougher
>[    1.354719] fuse init (API version 7.26)
>[    1.357930] Key type asymmetric registered
>[    1.357934] Asymmetric key parser 'x509' registered
>[    1.357983] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
>[    1.358052] io scheduler noop registered
>[    1.358056] io scheduler deadline registered
>[    1.358122] io scheduler cfq registered (default)
>[    1.359480] pcieport 0000:00:1c.0: AER enabled with IRQ 120
>[    1.359520] pcieport 0000:00:1c.4: AER enabled with IRQ 121
>[    1.359562] pcieport 0000:00:1d.0: AER enabled with IRQ 122
>[    1.359593] pcieport 0000:00:1c.0: Signaling PME with IRQ 120
>[    1.359618] pcieport 0000:00:1c.4: Signaling PME with IRQ 121
>[    1.359637] pcieport 0000:00:1d.0: Signaling PME with IRQ 122
>[    1.359740] efifb: probing for efifb
>[    1.359757] efifb: framebuffer at 0xe0000000, using 8128k, total 8128k
>[    1.359760] efifb: mode is 1920x1080x32, linelength=7680, pages=1
>[    1.359762] efifb: scrolling: redraw
>[    1.359765] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
>[    1.365456] Console: switching to colour frame buffer device 240x67
>[    1.370999] fb0: EFI VGA frame buffer device
>[    1.371029] intel_idle: MWAIT substates: 0x11142120
>[    1.371030] intel_idle: v0.4.1 model 0x9E
>[    1.371324] intel_idle: lapic_timer_reliable_states 0xffffffff
>[    1.371678] ACPI: AC Adapter [AC] (off-line)
>[    1.371794] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
>[    1.371909] ACPI: Sleep Button [SLPB]
>[    1.372307] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
>[    1.372691] ACPI: Lid Switch [LID]
>[    1.372750] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
>[    1.372894] ACPI: Power Button [PWRF]
>[    1.375776] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
>[    1.376535] thermal LNXTHERM:00: registered as thermal_zone0
>[    1.376564] ACPI: Thermal Zone [THM0] (43 C)
>[    1.376812] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
>[    1.398683] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
>[    1.402338] Linux agpgart interface v0.103
>[    1.408455] tpm_tis MSFT0101:00: 2.0 TPM (device-id 0x0, rev-id 78)
>[    1.415282] ACPI: Battery Slot [BAT0] (battery present)
>[    2.166392] loop: module loaded
>[    2.166623] libphy: Fixed MDIO Bus: probed
>[    2.166647] tun: Universal TUN/TAP device driver, 1.6
>[    2.166786] PPP generic driver version 2.4.2
>[    2.166922] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>[    2.166957] ehci-pci: EHCI PCI platform driver
>[    2.166992] ehci-platform: EHCI generic platform driver
>[    2.167030] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>[    2.167062] ohci-pci: OHCI PCI platform driver
>[    2.167094] ohci-platform: OHCI generic platform driver
>[    2.167127] uhci_hcd: USB Universal Host Controller Interface driver
>[    2.167454] xhci_hcd 0000:00:14.0: xHCI Host Controller
>[    2.167488] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
>[    2.168710] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
>[    2.168768] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
>[    2.168912] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>[    2.168946] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    2.168982] usb usb1: Product: xHCI Host Controller
>[    2.169008] usb usb1: Manufacturer: Linux 4.14.4-041404-generic xhci-hcd
>[    2.169041] usb usb1: SerialNumber: 0000:00:14.0
>[    2.169287] hub 1-0:1.0: USB hub found
>[    2.169352] hub 1-0:1.0: 16 ports detected
>[    2.169780] xhci_hcd 0000:00:14.0: xHCI Host Controller
>[    2.169811] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
>[    2.169895] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
>[    2.169929] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    2.169964] usb usb2: Product: xHCI Host Controller
>[    2.171325] usb usb2: Manufacturer: Linux 4.14.4-041404-generic xhci-hcd
>[    2.172740] usb usb2: SerialNumber: 0000:00:14.0
>[    2.174318] hub 2-0:1.0: USB hub found
>[    2.175722] hub 2-0:1.0: 8 ports detected
>[    2.177709] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
>[    2.181339] serio: i8042 KBD port at 0x60,0x64 irq 1
>[    2.182740] serio: i8042 AUX port at 0x60,0x64 irq 12
>[    2.184434] mousedev: PS/2 mouse device common for all mice
>[    2.186244] rtc_cmos 00:04: RTC can wake from S4
>[    2.188182] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
>[    2.189756] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
>[    2.191210] i2c /dev entries driver
>[    2.192807] device-mapper: uevent: version 1.0.3
>[    2.194268] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
>[    2.195951] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
>[    2.197456] intel_pstate: Intel P-state driver initializing
>[    2.199757] intel_pstate: HWP enabled
>[    2.201038] ledtrig-cpu: registered to indicate activity on CPUs
>[    2.201713] EFI Variables Facility v0.08 2004-May-17
>[    2.237457] NET: Registered protocol family 10
>[    2.241726] Segment Routing with IPv6
>[    2.242454] NET: Registered protocol family 17
>[    2.243348] Key type dns_resolver registered
>[    2.244708] RAS: Correctable Errors collector initialized.
>[    2.245489] microcode: sig=0x906e9, pf=0x20, revision=0x5e
>[    2.246420] microcode: Microcode Update Driver: v2.2.
>[    2.246426] sched_clock: Marking stable (2246409246, 0)->(2252713707, -6304461)
>[    2.248341] registered taskstats version 1
>[    2.249052] Loading compiled-in X.509 certificates
>[    2.251778] Loaded X.509 cert 'Build time autogenerated kernel key: 55909a0e80d28950bfda437111cde15a949d3803'
>[    2.252566] zswap: loaded using pool lzo/zbud
>[    2.256785] Key type big_key registered
>[    2.257462] Key type trusted registered
>[    2.259705] Key type encrypted registered
>[    2.324331] evm: HMAC attrs: 0x1
>[    2.326380]   Magic number: 13:569:100
>[    2.327196] rtc_cmos 00:04: setting system clock to 2017-12-21 23:03:40 UTC (1513897420)
>[    2.328073] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
>[    2.328702] EDD information not available.
>[    2.330612] Freeing unused kernel memory: 2328K
>[    2.331213] Write protecting the kernel read-only data: 16384k
>[    2.332282] Freeing unused kernel memory: 620K
>[    2.335508] Freeing unused kernel memory: 2012K
>[    2.340312] x86/mm: Checked W+X mappings: passed, no W+X pages found.
>[    2.368214] clocksource: Switched to clocksource tsc
>[    2.377427] hidraw: raw HID events driver (C) Jiri Kosina
>[    2.386035] acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01)
>[    2.386781] acpi PNP0C14:03: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01)
>[    2.389047] nvme nvme0: pci function 0000:05:00.0
>[    2.390604] rtsx_pci 0000:04:00.0: enabling device (0000 -> 0002)
>[    2.408664] pps_core: LinuxPPS API ver. 1 registered
>[    2.409353] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
>[    2.410939] PTP clock support registered
>[    2.414290] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
>[    2.414985] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
>[    2.415967] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
>[    2.515407] usb 1-6: new full-speed USB device number 2 using xhci_hcd
>[    2.626375]  nvme0n1: p1 p2
>[    2.666722] usb 1-6: New USB device found, idVendor=138a, idProduct=0097
>[    2.667369] usb 1-6: New USB device strings: Mfr=0, Product=0, SerialNumber=1
>[    2.668016] usb 1-6: SerialNumber: 793d84b91406
>[    2.687929] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
>[    2.777532] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) c8:5b:76:cb:bd:a3
>[    2.778201] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
>[    2.778922] e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: FFFFFF-0FF
>[    2.779723] i915 0000:00:02.0: enabling device (0006 -> 0007)
>[    2.780277] e1000e 0000:00:1f.6 enp0s31f6: renamed from eth0
>[    2.781431] [drm:intel_detect_pch [i915]] Found SunrisePoint PCH
>[    2.781465] [drm:intel_power_domains_init [i915]] Allowed DC state mask 03
>[    2.781546] [drm:intel_device_info_dump [i915]] i915 device info: platform=KABYLAKE gen=9 pciid=0x591b rev=0x04
>[    2.781579] [drm:intel_device_info_dump [i915]] i915 device info: is_mobile: no
>[    2.781593] [drm:intel_device_info_dump [i915]] i915 device info: is_lp: no
>[    2.781624] [drm:intel_device_info_dump [i915]] i915 device info: is_alpha_support: no
>[    2.781649] [drm:intel_device_info_dump [i915]] i915 device info: has_64bit_reloc: yes
>[    2.781661] [drm:intel_device_info_dump [i915]] i915 device info: has_aliasing_ppgtt: yes
>[    2.781672] [drm:intel_device_info_dump [i915]] i915 device info: has_csr: yes
>[    2.781701] [drm:intel_device_info_dump [i915]] i915 device info: has_ddi: yes
>[    2.781712] [drm:intel_device_info_dump [i915]] i915 device info: has_dp_mst: yes
>[    2.781752] [drm:intel_device_info_dump [i915]] i915 device info: has_reset_engine: yes
>[    2.781777] [drm:intel_device_info_dump [i915]] i915 device info: has_fbc: yes
>[    2.781786] [drm:intel_device_info_dump [i915]] i915 device info: has_fpga_dbg: yes
>[    2.781795] [drm:intel_device_info_dump [i915]] i915 device info: has_full_ppgtt: yes
>[    2.781804] [drm:intel_device_info_dump [i915]] i915 device info: has_full_48bit_ppgtt: yes
>[    2.781813] [drm:intel_device_info_dump [i915]] i915 device info: has_gmbus_irq: yes
>[    2.781822] [drm:intel_device_info_dump [i915]] i915 device info: has_gmch_display: no
>[    2.781831] [drm:intel_device_info_dump [i915]] i915 device info: has_guc: yes
>[    2.781840] [drm:intel_device_info_dump [i915]] i915 device info: has_guc_ct: no
>[    2.781849] [drm:intel_device_info_dump [i915]] i915 device info: has_hotplug: yes
>[    2.781858] [drm:intel_device_info_dump [i915]] i915 device info: has_l3_dpf: no
>[    2.781866] [drm:intel_device_info_dump [i915]] i915 device info: has_llc: yes
>[    2.781875] [drm:intel_device_info_dump [i915]] i915 device info: has_logical_ring_contexts: yes
>[    2.781884] [drm:intel_device_info_dump [i915]] i915 device info: has_overlay: no
>[    2.781893] [drm:intel_device_info_dump [i915]] i915 device info: has_pipe_cxsr: no
>[    2.781902] [drm:intel_device_info_dump [i915]] i915 device info: has_pooled_eu: no
>[    2.781910] [drm:intel_device_info_dump [i915]] i915 device info: has_psr: yes
>[    2.781919] [drm:intel_device_info_dump [i915]] i915 device info: has_rc6: yes
>[    2.781928] [drm:intel_device_info_dump [i915]] i915 device info: has_rc6p: no
>[    2.781936] [drm:intel_device_info_dump [i915]] i915 device info: has_resource_streamer: yes
>[    2.781945] [drm:intel_device_info_dump [i915]] i915 device info: has_runtime_pm: yes
>[    2.781954] [drm:intel_device_info_dump [i915]] i915 device info: has_snoop: no
>[    2.781963] [drm:intel_device_info_dump [i915]] i915 device info: unfenced_needs_alignment: no
>[    2.781971] [drm:intel_device_info_dump [i915]] i915 device info: cursor_needs_physical: no
>[    2.781980] [drm:intel_device_info_dump [i915]] i915 device info: hws_needs_physical: no
>[    2.781989] [drm:intel_device_info_dump [i915]] i915 device info: overlay_needs_physical: no
>[    2.781998] [drm:intel_device_info_dump [i915]] i915 device info: supports_tv: no
>[    2.784564] [drm:intel_device_info_runtime_init [i915]] slice mask: 0001
>[    2.784580] [drm:intel_device_info_runtime_init [i915]] slice total: 1
>[    2.784593] [drm:intel_device_info_runtime_init [i915]] subslice total: 3
>[    2.784606] [drm:intel_device_info_runtime_init [i915]] subslice mask 0007
>[    2.784617] [drm:intel_device_info_runtime_init [i915]] subslice per slice: 3
>[    2.784628] [drm:intel_device_info_runtime_init [i915]] EU total: 23
>[    2.784639] [drm:intel_device_info_runtime_init [i915]] EU per subslice: 8
>[    2.784649] [drm:intel_device_info_runtime_init [i915]] has slice power gating: n
>[    2.784658] [drm:intel_device_info_runtime_init [i915]] has subslice power gating: n
>[    2.784668] [drm:intel_device_info_runtime_init [i915]] has EU power gating: y
>[    2.784682] [drm:i915_driver_load [i915]] ppgtt mode: 3
>[    2.784696] [drm:i915_driver_load [i915]] use GPU semaphores? no
>[    2.784704] [drm] Memory usable by graphics device = 4096M
>[    2.785384] [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M
>[    2.785399] [drm:i915_ggtt_probe_hw [i915]] GTT stolen size = 32M
>[    2.785400] checking generic (e0000000 7f0000) vs hw (e0000000 10000000)
>[    2.785401] fb: switching to inteldrmfb from EFI VGA
>[    2.786051] Console: switching to colour dummy device 80x25
>[    2.786236] [drm] Replacing VGA console driver
>[    2.786292] [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 32768K, usable: 31744K
>[    2.786345] [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0xcff4f018
>[    2.786390] [drm:intel_opregion_setup [i915]] Public ACPI methods supported
>[    2.786431] [drm:intel_opregion_setup [i915]] SWSCI supported
>[    2.793097] [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483
>[    2.793116] [drm:intel_opregion_setup [i915]] ASLE supported
>[    2.793132] [drm:intel_opregion_setup [i915]] ASLE extension supported
>[    2.793146] [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)
>[    2.793202] [drm:intel_gvt_init [i915]] GVT-g is disabled by kernel params
>[    2.793204] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
>[    2.793207] [drm] Driver supports precise vblank timestamp query.
>[    2.793229] [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz
>[    2.793246] [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE        ", BDB version 209
>[    2.793260] [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0
>[    2.793273] [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2
>[    2.795644] [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0)
>[    2.795666] [drm:intel_bios_init [i915]] Panel type: 2 (VBT)
>[    2.795683] [drm:intel_bios_init [i915]] DRRS supported mode is static
>[    2.795699] [drm:intel_bios_init [i915]] Found panel mode in BIOS VBT tables:
>[    2.795708] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
>[    2.795722] [drm:intel_bios_init [i915]] VBT initial LVDS value 300
>[    2.795735] [drm:intel_bios_init [i915]] VBT backlight PWM modulation frequency 1415 Hz, active high, min brightness 4, level 85, controller 0
>[    2.795746] [drm:intel_bios_init [i915]] Unsupported child device size for SDVO mapping.
>[    2.795757] [drm:intel_bios_init [i915]] Expected child device config size for VBT version 209 not known; assuming 38
>[    2.795769] [drm:intel_bios_init [i915]] DRRS State Enabled:1
>[    2.795780] [drm:intel_bios_init [i915]] Port A VBT info: DP:1 HDMI:0 DVI:0 EDP:1 CRT:0
>[    2.795790] [drm:intel_bios_init [i915]] VBT HDMI level shift for port A: 0
>[    2.795800] [drm:intel_bios_init [i915]] Port B VBT info: DP:1 HDMI:1 DVI:1 EDP:0 CRT:0
>[    2.795811] [drm:intel_bios_init [i915]] VBT HDMI level shift for port B: 0
>[    2.795821] [drm:intel_bios_init [i915]] Port C VBT info: DP:1 HDMI:1 DVI:1 EDP:0 CRT:0
>[    2.795831] [drm:intel_bios_init [i915]] VBT HDMI level shift for port C: 0
>[    2.795840] [drm:intel_bios_init [i915]] VBT (e)DP boost level for port C: 3
>[    2.795850] [drm:intel_bios_init [i915]] VBT HDMI boost level for port C: 7
>[    2.795860] [drm:intel_bios_init [i915]] Port D VBT info: DP:1 HDMI:1 DVI:1 EDP:0 CRT:0
>[    2.795870] [drm:intel_bios_init [i915]] VBT HDMI level shift for port D: 8
>[    2.795925] [drm:intel_dsm_detect [i915]] no _DSM method for intel device
>[    2.795961] [drm:intel_update_rawclk [i915]] rawclk rate: 24000 kHz
>[    2.795978] [drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 00
>[    2.795995] [drm:intel_power_well_enable [i915]] enabling power well 1
>[    2.796010] [drm:intel_power_well_enable [i915]] enabling MISC IO power well
>[    2.796068] [drm:intel_update_cdclk [i915]] Current CD clock rate: 337500 kHz, VCO: 8100000 kHz, ref: 24000 kHz
>[    2.796069] usb 1-7: new full-speed USB device number 3 using xhci_hcd
>[    2.796113] [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz
>[    2.796165] [drm:intel_update_max_cdclk [i915]] Max dotclock rate: 675000 kHz
>[    2.796217] [drm:intel_power_well_enable [i915]] enabling always-on
>[    2.796230] [drm:intel_power_well_enable [i915]] enabling DC off
>[    2.796243] [drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 00
>[    2.796256] [drm:intel_power_well_enable [i915]] enabling power well 2
>[    2.796260] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=mem
>[    2.796283] [drm:intel_power_well_enable [i915]] enabling DDI A/E IO power well
>[    2.796295] [drm:intel_power_well_enable [i915]] enabling DDI B IO power well
>[    2.796306] [drm:intel_power_well_enable [i915]] enabling DDI C IO power well
>[    2.796345] [drm:intel_power_well_enable [i915]] enabling DDI D IO power well
>[    2.796394] [drm:intel_csr_ucode_init [i915]] Loading i915/kbl_dmc_ver1_01.bin
>[    2.796746] [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_01.bin (v1.1)
>[    2.797547] [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1
>[    2.797569] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec)
>[    2.797584] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec)
>[    2.797597] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec)
>[    2.797609] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec)
>[    2.797621] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec)
>[    2.797632] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec)
>[    2.797643] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec)
>[    2.797653] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec)
>[    2.797674] [drm:intel_modeset_init [i915]] 3 display pipes available.
>[    2.797715] [drm:intel_update_cdclk [i915]] Current CD clock rate: 337500 kHz, VCO: 8100000 kHz, ref: 24000 kHz
>[    2.798041] [drm:intel_dp_init_connector [i915]] Adding eDP connector on port A
>[    2.798061] [drm:intel_dp_init_connector [i915]] using AUX A for port A (VBT)
>[    2.798138] [drm:intel_pps_dump_state [i915]] cur t1_t3 0 t8 0 t9 0 t10 500 t11_t12 6000
>[    2.798153] [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2600 t10 500 t11_t12 6000
>[    2.798167] [drm:intel_dp_init_panel_power_sequencer.part.20 [i915]] panel power up delay 200, power down delay 50, power cycle delay 600
>[    2.798179] [drm:intel_dp_init_panel_power_sequencer.part.20 [i915]] backlight on delay 1, off delay 260
>[    2.798260] [drm:intel_dp_init_panel_power_sequencer_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06
>[    2.798296] [drm:edp_panel_vdd_on [i915]] Turning eDP port A VDD on
>[    2.798373] [drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000f
>[    2.798828] [drm:intel_dp_read_dpcd [i915]] DPCD: 11 0a 02 41 00 00 01 00 02 00 00 00 00 0b 00
>[    2.799289] [drm:drm_dp_read_desc [drm_kms_helper]] DP sink: OUI 00-00-00 dev-ID  HW-rev 0.0 SW-rev 0.0 quirks 0x0000
>[    2.800092] [drm:intel_dp_init_connector [i915]] EDP DPCD : 01 18 00
>[    2.803964] [drm:drm_edid_to_eld [drm]] ELD: no CEA Extension found
>[    2.803979] [drm:intel_dp_init_connector [i915]] VBT doesn't support DRRS
>[    2.804056] [drm:intel_panel_setup_backlight [i915]] Connector eDP-1 backlight initialized, enabled, brightness 353/1060
>[    2.804097] [drm:intel_dp_init_connector [i915]] Adding DP connector on port B
>[    2.804110] [drm:intel_dp_init_connector [i915]] using AUX B for port B (VBT)
>[    2.804127] [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on port B
>[    2.804141] [drm:intel_hdmi_init_connector [i915]] Using DDC pin 0x5 for port B (VBT)
>[    2.804168] [drm:intel_dp_init_connector [i915]] Adding DP connector on port C
>[    2.804195] [drm:intel_dp_init_connector [i915]] using AUX C for port C (VBT)
>[    2.804245] [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on port C
>[    2.804259] [drm:intel_hdmi_init_connector [i915]] Using DDC pin 0x4 for port C (VBT)
>[    2.804273] [drm:intel_dp_init_connector [i915]] Adding DP connector on port D
>[    2.804285] [drm:intel_dp_init_connector [i915]] using AUX D for port D (VBT)
>[    2.804299] [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on port D
>[    2.804312] [drm:intel_hdmi_init_connector [i915]] Using DDC pin 0x6 for port D (VBT)
>[    2.804341] [drm:intel_set_plane_visible [i915]] pipe A active planes 0x1
>[    2.804386] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:36:pipe A] hw state readout: enabled
>[    2.804404] [drm:intel_set_plane_visible [i915]] pipe B active planes 0x0
>[    2.804420] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:46:pipe B] hw state readout: disabled
>[    2.804436] [drm:intel_set_plane_visible [i915]] pipe C active planes 0x0
>[    2.804450] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:56:pipe C] hw state readout: disabled
>[    2.804464] [drm:intel_modeset_setup_hw_state [i915]] DPLL 0 hw state readout: crtc_mask 0x00000000, on 1
>[    2.804476] [drm:intel_modeset_setup_hw_state [i915]] DPLL 1 hw state readout: crtc_mask 0x00000001, on 1
>[    2.804487] [drm:intel_modeset_setup_hw_state [i915]] DPLL 2 hw state readout: crtc_mask 0x00000000, on 0
>[    2.804499] [drm:intel_modeset_setup_hw_state [i915]] DPLL 3 hw state readout: crtc_mask 0x00000000, on 0
>[    2.804513] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:57:DDI A] hw state readout: enabled, pipe A
>[    2.804524] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:67:DDI B] hw state readout: disabled, pipe A
>[    2.804553] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:69:DP-MST A] hw state readout: disabled, pipe A
>[    2.804564] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:70:DP-MST B] hw state readout: disabled, pipe B
>[    2.804587] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:71:DP-MST C] hw state readout: disabled, pipe C
>[    2.804612] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:74:DDI C] hw state readout: disabled, pipe A
>[    2.804622] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:76:DP-MST A] hw state readout: disabled, pipe A
>[    2.804632] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:77:DP-MST B] hw state readout: disabled, pipe B
>[    2.804642] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:78:DP-MST C] hw state readout: disabled, pipe C
>[    2.804652] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:80:DDI D] hw state readout: disabled, pipe A
>[    2.804661] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:82:DP-MST A] hw state readout: disabled, pipe A
>[    2.804671] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:83:DP-MST B] hw state readout: disabled, pipe B
>[    2.804681] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:84:DP-MST C] hw state readout: disabled, pipe C
>[    2.804692] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:58:eDP-1] hw state readout: enabled
>[    2.804702] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:68:DP-1] hw state readout: disabled
>[    2.804712] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:72:HDMI-A-1] hw state readout: disabled
>[    2.804723] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:75:DP-2] hw state readout: disabled
>[    2.804733] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:79:HDMI-A-2] hw state readout: disabled
>[    2.804743] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:81:DP-3] hw state readout: disabled
>[    2.804753] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:85:HDMI-A-3] hw state readout: disabled
>[    2.804774] [drm:intel_dump_pipe_config [i915]] [CRTC:36:pipe A][setup_hw_state]
>[    2.804786] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: EDP, pipe bpp: 18, dithering: 0
>[    2.804798] [drm:intel_dump_pipe_config [i915]] dp m_n: lanes: 2; gmch_m: 4954643, gmch_n: 8388608, link_m: 275257, link_n: 524288, tu: 64
>[    2.804808] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
>[    2.804819] [drm:intel_dump_pipe_config [i915]] requested mode:
>[    2.804826] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1920x1080" 60 141752 1920 1980 2012 2142 1080 1083 1089 1100 0x40 0x9
>[    2.804837] [drm:intel_dump_pipe_config [i915]] adjusted mode:
>[    2.804843] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1920x1080" 60 141752 1920 1980 2012 2142 1080 1083 1089 1100 0x40 0x9
>[    2.804854] [drm:intel_dump_pipe_config [i915]] crtc timings: 141752 1920 1980 2012 2142 1080 1083 1089 1100, type: 0x40 flags: 0x9
>[    2.804865] [drm:intel_dump_pipe_config [i915]] port clock: 270000, pipe src size: 1920x1080, pixel rate 141752
>[    2.804875] [drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1
>[    2.804885] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    2.804895] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
>[    2.804910] [drm:skl_dump_hw_state [i915]] dpll_hw_state: ctrl1: 0x13, cfgcr1: 0x0, cfgcr2: 0x0
>[    2.804920] [drm:intel_dump_pipe_config [i915]] planes on this crtc
>[    2.804930] [drm:intel_dump_pipe_config [i915]] [PLANE:27:plane 1A] disabled, scaler_id = -1
>[    2.804940] [drm:intel_dump_pipe_config [i915]] [PLANE:30:plane 2A] disabled, scaler_id = -1
>[    2.804950] [drm:intel_dump_pipe_config [i915]] [PLANE:33:cursor A] disabled, scaler_id = -1
>[    2.804960] [drm:intel_dump_pipe_config [i915]] [CRTC:46:pipe B][setup_hw_state]
>[    2.804970] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: B, pipe bpp: 0, dithering: 0
>[    2.804979] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
>[    2.804989] [drm:intel_dump_pipe_config [i915]] requested mode:
>[    2.804995] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    2.805005] [drm:intel_dump_pipe_config [i915]] adjusted mode:
>[    2.805010] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    2.805021] [drm:intel_dump_pipe_config [i915]] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[    2.805031] [drm:intel_dump_pipe_config [i915]] port clock: 0, pipe src size: 0x0, pixel rate 0
>[    2.805040] [drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1
>[    2.805050] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    2.805060] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
>[    2.805074] [drm:skl_dump_hw_state [i915]] dpll_hw_state: ctrl1: 0x0, cfgcr1: 0x0, cfgcr2: 0x0
>[    2.805083] [drm:intel_dump_pipe_config [i915]] planes on this crtc
>[    2.805093] [drm:intel_dump_pipe_config [i915]] [PLANE:37:plane 1B] disabled, scaler_id = -1
>[    2.805103] [drm:intel_dump_pipe_config [i915]] [PLANE:40:plane 2B] disabled, scaler_id = -1
>[    2.805113] [drm:intel_dump_pipe_config [i915]] [PLANE:43:cursor B] disabled, scaler_id = -1
>[    2.805123] [drm:intel_dump_pipe_config [i915]] [CRTC:56:pipe C][setup_hw_state]
>[    2.805132] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: C, pipe bpp: 0, dithering: 0
>[    2.805142] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
>[    2.805151] [drm:intel_dump_pipe_config [i915]] requested mode:
>[    2.805157] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    2.805167] [drm:intel_dump_pipe_config [i915]] adjusted mode:
>[    2.805172] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    2.805183] [drm:intel_dump_pipe_config [i915]] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[    2.805193] [drm:intel_dump_pipe_config [i915]] port clock: 0, pipe src size: 0x0, pixel rate 0
>[    2.805202] [drm:intel_dump_pipe_config [i915]] num_scalers: 1, scaler_users: 0x0, scaler_id: -1
>[    2.805212] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    2.805221] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
>[    2.805234] [drm:skl_dump_hw_state [i915]] dpll_hw_state: ctrl1: 0x0, cfgcr1: 0x0, cfgcr2: 0x0
>[    2.805244] [drm:intel_dump_pipe_config [i915]] planes on this crtc
>[    2.805254] [drm:intel_dump_pipe_config [i915]] [PLANE:47:plane 1C] disabled, scaler_id = -1
>[    2.805264] [drm:intel_dump_pipe_config [i915]] [PLANE:50:plane 2C] disabled, scaler_id = -1
>[    2.805273] [drm:intel_dump_pipe_config [i915]] [PLANE:53:cursor C] disabled, scaler_id = -1
>[    2.805286] [drm:intel_modeset_setup_hw_state [i915]] DPLL 0 enabled but not in use, disabling
>[    2.805321] [drm:intel_power_well_disable [i915]] disabling DDI D IO power well
>[    2.805337] [drm:intel_power_well_disable [i915]] disabling DDI C IO power well
>[    2.805350] [drm:intel_power_well_disable [i915]] disabling DDI B IO power well
>[    2.805363] [drm:intel_power_well_disable [i915]] disabling power well 2
>[    2.805384] [drm:skylake_get_initial_plane_config [i915]] pipe A with fb: size=1920x1080@32, offset=0, pitch 7680, size 0x7e9000
>[    2.805401] [drm:i915_gem_object_create_stolen_for_preallocated [i915]] creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=7e9000
>[    2.805416] [drm:i915_gem_object_create_stolen_for_preallocated [i915]] failed to allocate stolen space
>[    2.805430] [drm:intel_set_plane_visible [i915]] pipe A active planes 0x0
>[    2.805876] [drm:i915_gem_init_ggtt [i915]] clearing unused GTT space: [1000, 100000000]
>[    2.805945] [drm:i915_gem_contexts_init [i915]] logical context support initialized
>[    2.805987] [drm:intel_engine_create_scratch [i915]] rcs0 pipe control offset: 0xfffff000
>[    2.806706] [drm:gen8_init_common_ring [i915]] Execlists enabled for rcs0
>[    2.806739] [drm:init_workarounds_ring [i915]] rcs0: Number of context specific w/a: 17
>[    2.806793] [drm:gen8_init_common_ring [i915]] Execlists enabled for bcs0
>[    2.806847] [drm:gen8_init_common_ring [i915]] Execlists enabled for vcs0
>[    2.806897] [drm:gen8_init_common_ring [i915]] Execlists enabled for vecs0
>[    2.806958] [drm:intel_fbdev_init [i915]] pipe A not active or no fb, skipping
>[    2.806976] [drm:intel_fbdev_init [i915]] pipe B not active or no fb, skipping
>[    2.806992] [drm:intel_fbdev_init [i915]] pipe C not active or no fb, skipping
>[    2.807005] [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config
>[    2.807175] [drm:intel_dp_detect [i915]] [CONNECTOR:58:eDP-1]
>[    2.807192] [drm:intel_dp_detect [i915]] Display Port TPS3 support: source yes, sink no
>[    2.807253] [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000
>[    2.807268] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000
>[    2.807300] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000
>[    2.807360] [drm:intel_backlight_device_register [i915]] Connector eDP-1 backlight sysfs interface registered
>[    2.807386] [drm:intel_dp_connector_register [i915]] registering DPDDC-A bus for card0-eDP-1
>[    2.807463] [drm:intel_dp_connector_register [i915]] registering DPDDC-B bus for card0-DP-1
>[    2.807556] [drm:intel_dp_connector_register [i915]] registering DPDDC-C bus for card0-DP-2
>[    2.807632] [drm:intel_dp_connector_register [i915]] registering DPDDC-D bus for card0-DP-3
>[    2.807681] [drm] Initialized i915 1.6.0 20170818 for 0000:00:02.0 on minor 0
>[    2.807726] [drm:drm_dp_read_desc [drm_kms_helper]] DP sink: OUI 00-00-00 dev-ID  HW-rev 0.0 SW-rev 0.0 quirks 0x0000
>[    2.807757] [drm:intel_opregion_register [i915]] 7 outputs detected
>[    2.808446] [drm:drm_helper_hpd_irq_event [drm_kms_helper]] [CONNECTOR:58:eDP-1] status updated from unknown to connected
>[    2.808461] [drm:intel_dp_detect [i915]] [CONNECTOR:68:DP-1]
>[    2.808505] [drm:intel_power_well_enable [i915]] enabling power well 2
>[    2.808547] [drm:intel_power_well_disable [i915]] disabling power well 2
>[    2.808554] [drm:drm_helper_hpd_irq_event [drm_kms_helper]] [CONNECTOR:68:DP-1] status updated from unknown to disconnected
>[    2.808571] [drm:intel_hdmi_detect [i915]] [CONNECTOR:72:HDMI-A-1]
>[    2.809908] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
>[    2.810178] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
>[    2.810364] [drm:drm_setup_crtcs [drm_kms_helper]] 
>[    2.810833] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
>[    2.810852] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
>[    2.812150] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
>[    2.812158] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb
>[    2.814478] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
>[    2.814500] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
>[    2.816311] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
>[    2.816317] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[    2.816320] [drm:drm_helper_hpd_irq_event [drm_kms_helper]] [CONNECTOR:72:HDMI-A-1] status updated from unknown to disconnected
>[    2.816343] [drm:intel_dp_detect [i915]] [CONNECTOR:75:DP-2]
>[    2.816362] [drm:intel_power_well_enable [i915]] enabling power well 2
>[    2.816404] [drm:intel_power_well_disable [i915]] disabling power well 2
>[    2.816410] [drm:drm_helper_hpd_irq_event [drm_kms_helper]] [CONNECTOR:75:DP-2] status updated from unknown to disconnected
>[    2.816431] [drm:intel_hdmi_detect [i915]] [CONNECTOR:79:HDMI-A-2]
>[    2.818753] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[    2.818774] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[    2.820311] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[    2.820319] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc
>[    2.822647] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[    2.822667] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[    2.824309] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[    2.824314] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[    2.824317] [drm:drm_helper_hpd_irq_event [drm_kms_helper]] [CONNECTOR:79:HDMI-A-2] status updated from unknown to disconnected
>[    2.824338] [drm:intel_dp_detect [i915]] [CONNECTOR:81:DP-3]
>[    2.824356] [drm:intel_power_well_enable [i915]] enabling power well 2
>[    2.824397] [drm:intel_power_well_disable [i915]] disabling power well 2
>[    2.824404] [drm:drm_helper_hpd_irq_event [drm_kms_helper]] [CONNECTOR:81:DP-3] status updated from unknown to disconnected
>[    2.824424] [drm:intel_hdmi_detect [i915]] [CONNECTOR:85:HDMI-A-3]
>[    2.826750] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
>[    2.826770] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry
>[    2.828303] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
>[    2.828310] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpd
>[    2.830638] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0040 w(1)
>[    2.830658] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry
>[    2.832991] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0040 w(1)
>[    2.832996] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[    2.833000] [drm:drm_helper_hpd_irq_event [drm_kms_helper]] [CONNECTOR:85:HDMI-A-3] status updated from unknown to disconnected
>[    2.833056] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:58:eDP-1]
>[    2.833094] [drm:intel_dp_detect [i915]] [CONNECTOR:58:eDP-1]
>[    2.833116] [drm:intel_dp_detect [i915]] Display Port TPS3 support: source yes, sink no
>[    2.833136] [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000
>[    2.833163] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000
>[    2.833176] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000
>[    2.833600] [drm:drm_dp_read_desc [drm_kms_helper]] DP sink: OUI 00-00-00 dev-ID  HW-rev 0.0 SW-rev 0.0 quirks 0x0000
>[    2.834353] [drm:drm_edid_to_eld [drm]] ELD: no CEA Extension found
>[    2.834377] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:58:eDP-1] probed modes :
>[    2.834384] [drm:drm_mode_debug_printmodeline [drm]] Modeline 59:"1920x1080" 60 141400 1920 1980 2012 2142 1080 1083 1089 1100 0x48 0x9
>[    2.834389] [drm:drm_mode_debug_printmodeline [drm]] Modeline 60:"1920x1080" 48 113120 1920 1968 2000 2142 1080 1083 1089 1100 0x40 0x9
>[    2.834392] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:68:DP-1]
>[    2.834408] [drm:intel_dp_detect [i915]] [CONNECTOR:68:DP-1]
>[    2.834426] [drm:intel_power_well_enable [i915]] enabling power well 2
>[    2.834467] [drm:intel_power_well_disable [i915]] disabling power well 2
>[    2.834474] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:68:DP-1] disconnected
>[    2.834476] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:72:HDMI-A-1]
>[    2.834494] [drm:intel_hdmi_detect [i915]] [CONNECTOR:72:HDMI-A-1]
>[    2.836261] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
>[    2.836281] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
>[    2.838597] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
>[    2.838604] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb
>[    2.840256] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
>[    2.840270] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
>[    2.842611] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
>[    2.842617] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[    2.842621] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:72:HDMI-A-1] disconnected
>[    2.842625] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:75:DP-2]
>[    2.842646] [drm:intel_dp_detect [i915]] [CONNECTOR:75:DP-2]
>[    2.842664] [drm:intel_power_well_enable [i915]] enabling power well 2
>[    2.842705] [drm:intel_power_well_disable [i915]] disabling power well 2
>[    2.842711] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:75:DP-2] disconnected
>[    2.842714] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:79:HDMI-A-2]
>[    2.842733] [drm:intel_hdmi_detect [i915]] [CONNECTOR:79:HDMI-A-2]
>[    2.844303] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[    2.844358] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[    2.846723] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[    2.846734] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc
>[    2.849074] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[    2.849095] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[    2.851472] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[    2.851480] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[    2.851483] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:79:HDMI-A-2] disconnected
>[    2.851488] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:81:DP-3]
>[    2.851509] [drm:intel_dp_detect [i915]] [CONNECTOR:81:DP-3]
>[    2.851527] [drm:intel_power_well_enable [i915]] enabling power well 2
>[    2.851569] [drm:intel_power_well_disable [i915]] disabling power well 2
>[    2.851576] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:81:DP-3] disconnected
>[    2.851579] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:85:HDMI-A-3]
>[    2.851598] [drm:intel_hdmi_detect [i915]] [CONNECTOR:85:HDMI-A-3]
>[    2.853940] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
>[    2.853961] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry
>[    2.856335] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
>[    2.856346] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpd
>[    2.858690] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0040 w(1)
>[    2.858710] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry
>[    2.861055] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0040 w(1)
>[    2.861062] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[    2.861066] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:85:HDMI-A-3] disconnected
>[    2.861070] [drm:drm_setup_crtcs [drm_kms_helper]] connector 58 enabled? yes
>[    2.861073] [drm:drm_setup_crtcs [drm_kms_helper]] connector 68 enabled? no
>[    2.861075] [drm:drm_setup_crtcs [drm_kms_helper]] connector 72 enabled? no
>[    2.861078] [drm:drm_setup_crtcs [drm_kms_helper]] connector 75 enabled? no
>[    2.861080] [drm:drm_setup_crtcs [drm_kms_helper]] connector 79 enabled? no
>[    2.861082] [drm:drm_setup_crtcs [drm_kms_helper]] connector 81 enabled? no
>[    2.861085] [drm:drm_setup_crtcs [drm_kms_helper]] connector 85 enabled? no
>[    2.861109] [drm:intel_fb_initial_config [i915]] Not using firmware configuration
>[    2.861112] [drm:drm_setup_crtcs [drm_kms_helper]] looking for cmdline mode on connector 58
>[    2.861115] [drm:drm_setup_crtcs [drm_kms_helper]] looking for preferred mode on connector 58 0
>[    2.861117] [drm:drm_setup_crtcs [drm_kms_helper]] found mode 1920x1080
>[    2.861119] [drm:drm_setup_crtcs [drm_kms_helper]] picking CRTCs for 8192x8192 config
>[    2.861123] [drm:drm_setup_crtcs [drm_kms_helper]] desired mode 1920x1080 set on crtc 36 (0,0)
>[    2.861142] [drm:intelfb_create [i915]] no BIOS fb, allocating a new one
>[    2.861694] [drm:intelfb_create [i915]] allocated 1920x1080 fb: 0x00040000
>[    2.861770] fbcon: inteldrmfb (fb0) is primary device
>[    2.861868] [drm:intel_atomic_check.part.129 [i915]] [CONNECTOR:58:eDP-1] checking for sink bpp constrains
>[    2.861886] [drm:intel_atomic_check.part.129 [i915]] clamping display bpp (was 36) to EDID reported max of 18
>[    2.861898] [drm:drm_mode_debug_printmodeline [drm]] Modeline 62:"1920x1080" 60 141400 1920 1980 2012 2142 1080 1083 1089 1100 0x48 0x9
>[    2.861954] [drm:intel_dp_compute_config [i915]] DP link computation with max lane count 2 max bw 270000 pixel clock 141400KHz
>[    2.861972] [drm:intel_dp_compute_config [i915]] DP link bw 0a rate select 00 lane count 2 clock 270000 bpp 18
>[    2.861986] [drm:intel_dp_compute_config [i915]] DP link bw required 318150 available 540000
>[    2.862004] [drm:intel_atomic_check.part.129 [i915]] hw max bpp: 36, pipe bpp: 18, dithering: 1
>[    2.862022] [drm:intel_dump_pipe_config [i915]] [CRTC:36:pipe A][modeset]
>[    2.862055] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: EDP, pipe bpp: 18, dithering: 1
>[    2.862084] [drm:intel_dump_pipe_config [i915]] dp m_n: lanes: 2; gmch_m: 4942288, gmch_n: 8388608, link_m: 274571, link_n: 524288, tu: 64
>[    2.862096] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
>[    2.862120] [drm:intel_dump_pipe_config [i915]] requested mode:
>[    2.862127] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1920x1080" 60 141400 1920 1980 2012 2142 1080 1083 1089 1100 0x48 0x9
>[    2.862138] [drm:intel_dump_pipe_config [i915]] adjusted mode:
>[    2.862144] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1920x1080" 60 141400 1920 1980 2012 2142 1080 1083 1089 1100 0x48 0x9
>[    2.862156] [drm:intel_dump_pipe_config [i915]] crtc timings: 141400 1920 1980 2012 2142 1080 1083 1089 1100, type: 0x48 flags: 0x9
>[    2.862167] [drm:intel_dump_pipe_config [i915]] port clock: 270000, pipe src size: 1920x1080, pixel rate 141400
>[    2.862177] [drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1
>[    2.862187] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    2.862197] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
>[    2.862213] [drm:skl_dump_hw_state [i915]] dpll_hw_state: ctrl1: 0x13, cfgcr1: 0x0, cfgcr2: 0x0
>[    2.862223] [drm:intel_dump_pipe_config [i915]] planes on this crtc
>[    2.862234] [drm:intel_dump_pipe_config [i915]] [PLANE:27:plane 1A] disabled, scaler_id = -1
>[    2.862244] [drm:intel_dump_pipe_config [i915]] [PLANE:30:plane 2A] disabled, scaler_id = -1
>[    2.862254] [drm:intel_dump_pipe_config [i915]] [PLANE:33:cursor A] disabled, scaler_id = -1
>[    2.862268] [drm:intel_atomic_check.part.129 [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz
>[    2.862285] [drm:intel_find_shared_dpll [i915]] [CRTC:36:pipe A] allocated DPLL 0
>[    2.862297] [drm:intel_reference_shared_dpll [i915]] using DPLL 0 for pipe A
>[    2.862328] [drm:intel_edp_backlight_off [i915]] 
>[    2.945907] usb 1-7: New USB device found, idVendor=8087, idProduct=0a2b
>[    2.945908] usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    3.072154] usb 1-8: new high-speed USB device number 4 using xhci_hcd
>[    3.136379] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 0
>[    3.136429] [drm:lpt_disable_backlight [i915]] cpu backlight was enabled, disabling
>[    3.136484] [drm:intel_disable_pipe [i915]] disabling pipe A
>[    3.147770] [drm:intel_edp_panel_off.part.30 [i915]] Turn eDP port A panel power off
>[    3.147825] [drm:intel_edp_panel_off.part.30 [i915]] Wait for panel power off time
>[    3.147919] [drm:wait_panel_status [i915]] mask b0000000 value 00000000 status a0000003 control 00000000
>[    3.148823] [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x01000000, dig 0x11101010, pins 0x00000010
>[    3.148845] [drm:intel_hpd_irq_handler [i915]] digital hpd port A - short
>[    3.148877] [drm:intel_dp_hpd_pulse [i915]] got hpd irq on port A - short
>[    3.200329] [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010
>[    3.200351] [drm:intel_hpd_irq_handler [i915]] digital hpd port A - long
>[    3.200371] [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 0
>[    3.200481] [drm:wait_panel_status [i915]] Wait complete
>[    3.200532] [drm:intel_power_well_disable [i915]] disabling DDI A/E IO power well
>[    3.200579] [drm:edp_panel_vdd_on [i915]] Turning eDP port A VDD on
>[    3.200599] [drm:intel_disable_shared_dpll [i915]] disable DPLL 1 (active 1, on? 1) for crtc 36
>[    3.200638] [drm:wait_panel_power_cycle [i915]] Wait for panel power cycle
>[    3.200673] [drm:intel_disable_shared_dpll [i915]] disabling DPLL 1
>[    3.200714] [drm:intel_atomic_commit_tail [i915]] [ENCODER:57:DDI A]
>[    3.200729] [drm:intel_atomic_commit_tail [i915]] [ENCODER:67:DDI B]
>[    3.200743] [drm:intel_atomic_commit_tail [i915]] [ENCODER:69:DP-MST A]
>[    3.200756] [drm:intel_atomic_commit_tail [i915]] [ENCODER:70:DP-MST B]
>[    3.200768] [drm:intel_atomic_commit_tail [i915]] [ENCODER:71:DP-MST C]
>[    3.200779] [drm:intel_atomic_commit_tail [i915]] [ENCODER:74:DDI C]
>[    3.200802] [drm:intel_atomic_commit_tail [i915]] [ENCODER:76:DP-MST A]
>[    3.200813] [drm:intel_atomic_commit_tail [i915]] [ENCODER:77:DP-MST B]
>[    3.200823] [drm:intel_atomic_commit_tail [i915]] [ENCODER:78:DP-MST C]
>[    3.200833] [drm:intel_atomic_commit_tail [i915]] [ENCODER:80:DDI D]
>[    3.200843] [drm:intel_atomic_commit_tail [i915]] [ENCODER:82:DP-MST A]
>[    3.200853] [drm:intel_atomic_commit_tail [i915]] [ENCODER:83:DP-MST B]
>[    3.200863] [drm:intel_atomic_commit_tail [i915]] [ENCODER:84:DP-MST C]
>[    3.200877] [drm:verify_single_dpll_state.isra.70 [i915]] DPLL 0
>[    3.200890] [drm:verify_single_dpll_state.isra.70 [i915]] DPLL 1
>[    3.200901] [drm:verify_single_dpll_state.isra.70 [i915]] DPLL 2
>[    3.200911] [drm:verify_single_dpll_state.isra.70 [i915]] DPLL 3
>[    3.200928] [drm:intel_enable_shared_dpll [i915]] enable DPLL 0 (active 1, on? 0) for crtc 36
>[    3.200941] [drm:intel_enable_shared_dpll [i915]] enabling DPLL 0
>[    3.261376] usb 1-8: New USB device found, idVendor=04f2, idProduct=b5c0
>[    3.261377] usb 1-8: New USB device strings: Mfr=3, Product=1, SerialNumber=2
>[    3.261378] usb 1-8: Product: Integrated Camera
>[    3.261379] usb 1-8: Manufacturer: Chicony Electronics Co.,Ltd.
>[    3.261379] usb 1-8: SerialNumber: 0001
>[    3.284044] psmouse serio1: synaptics: queried max coordinates: x [..5676], y [..4758]
>[    3.320598] psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1096..]
>[    3.320602] psmouse serio1: synaptics: Your touchpad (PNP: LEN2045 PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org.
>[    3.390534] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.2, id: 0x1e2b1, caps: 0xf008a3/0x943300/0x12e800/0x410000, board id: 3053, fw id: 2491654
>[    3.390539] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
>[    3.392198] usb 1-9: new full-speed USB device number 5 using xhci_hcd
>[    3.434497] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
>[    3.552055] usb 1-9: New USB device found, idVendor=058f, idProduct=9540
>[    3.552056] usb 1-9: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    3.552057] usb 1-9: Product: EMV Smartcard Reader
>[    3.552057] usb 1-9: Manufacturer: Generic
>[    3.808347] [drm:wait_panel_status [i915]] mask b800000f value 00000000 status 00000000 control 00000000
>[    3.808387] [drm:wait_panel_status [i915]] Wait complete
>[    3.808460] [drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008
>[    3.808494] [drm:edp_panel_vdd_on [i915]] eDP port A panel power wasn't enabled
>[    3.883696] [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010
>[    3.883719] [drm:intel_hpd_irq_handler [i915]] digital hpd port A - long
>[    3.883738] [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 1
>[    4.016964] [drm:intel_dp_read_dpcd [i915]] DPCD: 11 0a 02 41 00 00 01 00 02 00 00 00 00 0b 00
>[    4.016991] [drm:edp_panel_on [i915]] Turn eDP port A panel power on
>[    4.017031] [drm:wait_panel_power_cycle [i915]] Wait for panel power cycle
>[    4.017126] [drm:wait_panel_status [i915]] mask b800000f value 00000000 status 00000000 control 00000008
>[    4.017161] [drm:wait_panel_status [i915]] Wait complete
>[    4.017212] [drm:edp_panel_on [i915]] Wait for panel power on
>[    4.017298] [drm:wait_panel_status [i915]] mask b000000f value 80000008 status 9000000a control 0000000b
>[    4.122755] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
>[    4.219649] [drm:wait_panel_status [i915]] Wait complete
>[    4.219689] [drm:intel_power_well_enable [i915]] enabling DDI A/E IO power well
>[    4.220089] [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP port A
>[    4.220136] [drm:i915_hotplug_work_func [i915]] running encoder hotplug functions
>[    4.220157] [drm:i915_hotplug_work_func [i915]] Connector eDP-1 (pin 4) received hotplug event.
>[    4.221191] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 00000000
>[    4.221207] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 0
>[    4.221220] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0
>[    4.221233] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS1
>[    4.221935] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 04000000
>[    4.221947] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 1
>[    4.221984] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0
>[    4.222639] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 04000000
>[    4.222651] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 1
>[    4.222675] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0
>[    4.223373] [drm:intel_dp_start_link_train [i915]] clock recovery OK
>[    4.223398] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS2
>[    4.224357] [drm:intel_dp_start_link_train [i915]] Channel EQ done. DP Training successful
>[    4.224395] [drm:intel_dp_start_link_train [i915]] [CONNECTOR:58:eDP-1] Link Training Passed at Link Rate = 270000, Lane count = 2
>[    4.224814] [drm:intel_enable_pipe [i915]] enabling pipe A
>[    4.224831] [drm:intel_edp_backlight_on [i915]] 
>[    4.224847] [drm:intel_panel_enable_backlight [i915]] pipe A
>[    4.224938] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 353
>[    4.225008] [drm:intel_psr_enable [i915]] PSR not supported by this panel
>[    4.225021] [drm:intel_edp_drrs_enable [i915]] Panel doesn't support DRRS
>[    4.225039] [drm:intel_fbc_enable [i915]] reserved 16588800 bytes of contiguous stolen space for FBC, threshold: 1
>[    4.225052] [drm:intel_fbc_enable [i915]] Enabling FBC on pipe A
>[    4.258354] [drm:verify_connector_state.isra.109 [i915]] [CONNECTOR:58:eDP-1]
>[    4.258378] [drm:intel_atomic_commit_tail [i915]] [CRTC:36:pipe A]
>[    4.258404] [drm:verify_single_dpll_state.isra.70 [i915]] DPLL 0
>[    4.258423] [drm:intel_enable_sagv [i915]] Enabling the SAGV
>[    4.258453] [drm:intel_dp_detect [i915]] [CONNECTOR:58:eDP-1]
>[    4.258470] [drm:intel_dp_detect [i915]] Display Port TPS3 support: source yes, sink no
>[    4.258487] [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000
>[    4.258502] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000
>[    4.258514] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000
>[    4.258563] Console: switching to colour frame buffer device 240x67
>[    4.258921] [drm:drm_dp_read_desc [drm_kms_helper]] DP sink: OUI 00-00-00 dev-ID  HW-rev 0.0 SW-rev 0.0 quirks 0x0000
>[    4.278013] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
>[    4.292052] [drm:drm_fb_helper_hotplug_event.part.30 [drm_kms_helper]] 
>[    4.292056] [drm:drm_setup_crtcs [drm_kms_helper]] 
>[    4.292061] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:58:eDP-1]
>[    4.292115] [drm:intel_dp_detect [i915]] [CONNECTOR:58:eDP-1]
>[    4.292150] [drm:intel_dp_detect [i915]] Display Port TPS3 support: source yes, sink no
>[    4.292198] [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000
>[    4.292212] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000
>[    4.292225] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000
>[    4.292708] [drm:drm_dp_read_desc [drm_kms_helper]] DP sink: OUI 00-00-00 dev-ID  HW-rev 0.0 SW-rev 0.0 quirks 0x0000
>[    4.293468] [drm:drm_edid_to_eld [drm]] ELD: no CEA Extension found
>[    4.293481] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:58:eDP-1] probed modes :
>[    4.293488] [drm:drm_mode_debug_printmodeline [drm]] Modeline 59:"1920x1080" 60 141400 1920 1980 2012 2142 1080 1083 1089 1100 0x48 0x9
>[    4.293494] [drm:drm_mode_debug_printmodeline [drm]] Modeline 60:"1920x1080" 48 113120 1920 1968 2000 2142 1080 1083 1089 1100 0x40 0x9
>[    4.293497] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:68:DP-1]
>[    4.293516] [drm:intel_dp_detect [i915]] [CONNECTOR:68:DP-1]
>[    4.293527] [drm:intel_power_well_enable [i915]] enabling power well 2
>[    4.293580] [drm:intel_power_well_disable [i915]] disabling power well 2
>[    4.293588] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:68:DP-1] disconnected
>[    4.293591] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:72:HDMI-A-1]
>[    4.293618] [drm:intel_hdmi_detect [i915]] [CONNECTOR:72:HDMI-A-1]
>[    4.295827] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
>[    4.295842] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
>[    4.298147] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
>[    4.298155] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb
>[    4.300302] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
>[    4.300316] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
>[    4.302638] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
>[    4.302643] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[    4.302646] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:72:HDMI-A-1] disconnected
>[    4.302649] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:75:DP-2]
>[    4.302664] [drm:intel_dp_detect [i915]] [CONNECTOR:75:DP-2]
>[    4.302674] [drm:intel_power_well_enable [i915]] enabling power well 2
>[    4.302708] [drm:intel_power_well_disable [i915]] disabling power well 2
>[    4.302714] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:75:DP-2] disconnected
>[    4.302717] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:79:HDMI-A-2]
>[    4.302729] [drm:intel_hdmi_detect [i915]] [CONNECTOR:79:HDMI-A-2]
>[    4.304250] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[    4.304264] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[    4.306567] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[    4.306576] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc
>[    4.308219] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[    4.308233] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[    4.310409] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[    4.310415] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[    4.310418] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:79:HDMI-A-2] disconnected
>[    4.310421] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:81:DP-3]
>[    4.310436] [drm:intel_dp_detect [i915]] [CONNECTOR:81:DP-3]
>[    4.310447] [drm:intel_power_well_enable [i915]] enabling power well 2
>[    4.310482] [drm:intel_power_well_disable [i915]] disabling power well 2
>[    4.310488] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:81:DP-3] disconnected
>[    4.310491] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:85:HDMI-A-3]
>[    4.310504] [drm:intel_hdmi_detect [i915]] [CONNECTOR:85:HDMI-A-3]
>[    4.312305] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
>[    4.312319] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry
>[    4.314634] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
>[    4.314642] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpd
>[    4.316260] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0040 w(1)
>[    4.316273] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry
>[    4.318600] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0040 w(1)
>[    4.318606] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[    4.318609] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:85:HDMI-A-3] disconnected
>[    4.318613] [drm:drm_setup_crtcs [drm_kms_helper]] connector 58 enabled? yes
>[    4.318616] [drm:drm_setup_crtcs [drm_kms_helper]] connector 68 enabled? no
>[    4.318618] [drm:drm_setup_crtcs [drm_kms_helper]] connector 72 enabled? no
>[    4.318620] [drm:drm_setup_crtcs [drm_kms_helper]] connector 75 enabled? no
>[    4.318623] [drm:drm_setup_crtcs [drm_kms_helper]] connector 79 enabled? no
>[    4.318625] [drm:drm_setup_crtcs [drm_kms_helper]] connector 81 enabled? no
>[    4.318627] [drm:drm_setup_crtcs [drm_kms_helper]] connector 85 enabled? no
>[    4.318643] [drm:intel_fb_initial_config [i915]] Not using firmware configuration
>[    4.318646] [drm:drm_setup_crtcs [drm_kms_helper]] looking for cmdline mode on connector 58
>[    4.318649] [drm:drm_setup_crtcs [drm_kms_helper]] looking for preferred mode on connector 58 0
>[    4.318651] [drm:drm_setup_crtcs [drm_kms_helper]] found mode 1920x1080
>[    4.318653] [drm:drm_setup_crtcs [drm_kms_helper]] picking CRTCs for 1920x1080 config
>[    4.318657] [drm:drm_setup_crtcs [drm_kms_helper]] desired mode 1920x1080 set on crtc 36 (0,0)
>[    4.341523] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input7
>[    4.413642] EXT4-fs (nvme0n1p2): mounted filesystem with ordered data mode. Opts: (null)
>[    4.491057] ip_tables: (C) 2000-2006 Netfilter Core Team
>[    4.557751] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
>[    4.557876] systemd[1]: Detected architecture x86-64.
>[    4.559185] systemd[1]: Set hostname to <ps-ThinkPad-T470p>.
>[    4.601849] systemd[1]: Listening on udev Kernel Socket.
>[    4.604246] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
>[    4.606954] systemd[1]: Created slice User and Session Slice.
>[    4.609646] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
>[    4.612275] systemd[1]: Listening on udev Control Socket.
>[    4.614902] systemd[1]: Listening on Journal Socket (/dev/log).
>[    4.617592] systemd[1]: Created slice System Slice.
>[    4.661595] lp: driver loaded but no devices found
>[    4.664675] ppdev: user-space parallel port driver
>[    4.705462] EXT4-fs (nvme0n1p2): re-mounted. Opts: errors=remount-ro
>[    4.716036] systemd-journald[296]: Received request to flush runtime journal from PID 1
>[    4.750560] Adding 2097148k swap on /swapfile.  Priority:-2 extents:6 across:2260988k SSFS
>[    4.782275] random: crng init done
>[    4.800422] [drm] RC6 on
>[    4.830514] Bluetooth: Core ver 2.22
>[    4.830523] NET: Registered protocol family 31
>[    4.830524] Bluetooth: HCI device and connection manager initialized
>[    4.830526] Bluetooth: HCI socket layer initialized
>[    4.830527] Bluetooth: L2CAP socket layer initialized
>[    4.830530] Bluetooth: SCO socket layer initialized
>[    4.858498] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
>[    4.859288] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>[    4.862456] [drm:intel_backlight_device_update_status [i915]] updating intel_backlight, brightness=265/1060
>[    4.862478] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 278
>[    4.867545] Non-volatile memory driver v1.3
>[    4.869502] media: Linux media interface: v0.10
>[    4.870046] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
>[    4.872138] thinkpad_acpi: ThinkPad ACPI Extras v0.25
>[    4.872138] thinkpad_acpi: http://ibm-acpi.sf.net/
>[    4.872139] thinkpad_acpi: ThinkPad BIOS R0FET37W (1.17 ), EC unknown
>[    4.872139] thinkpad_acpi: Lenovo ThinkPad T470p, model 20J6001AMX
>[    4.872411] thinkpad_acpi: radio switch found; radios are enabled
>[    4.872420] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
>[    4.872421] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
>[    4.874168] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
>[    4.879627] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
>[    4.883171] Bluetooth: HCI UART driver ver 2.3
>[    4.883172] Bluetooth: HCI UART protocol H4 registered
>[    4.883172] Bluetooth: HCI UART protocol BCSP registered
>[    4.883182] Bluetooth: HCI UART protocol LL registered
>[    4.883183] Bluetooth: HCI UART protocol ATH3K registered
>[    4.883183] Bluetooth: HCI UART protocol Three-wire (H5) registered
>[    4.883203] Bluetooth: HCI UART protocol Intel registered
>[    4.883216] Bluetooth: HCI UART protocol Broadcom registered
>[    4.883216] Bluetooth: HCI UART protocol QCA registered
>[    4.883217] Bluetooth: HCI UART protocol AG6XX registered
>[    4.883217] Bluetooth: HCI UART protocol Marvell registered
>[    4.884662] usbcore: registered new interface driver btusb
>[    4.888686] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input8
>[    4.889536] Bluetooth: hci0: Bootloader revision 0.0 build 26 week 38 2015
>[    4.890536] Bluetooth: hci0: Device revision is 16
>[    4.890536] Bluetooth: hci0: Secure boot is enabled
>[    4.890537] Bluetooth: hci0: OTP lock is enabled
>[    4.890537] Bluetooth: hci0: API lock is enabled
>[    4.890538] Bluetooth: hci0: Debug lock is disabled
>[    4.890538] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
>[    4.911801] Bluetooth: hci0: Found device firmware: intel/ibt-12-16.sfi
>[    4.913726] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
>[    4.913727] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
>[    4.913728] RAPL PMU: hw unit of domain package 2^-14 Joules
>[    4.913728] RAPL PMU: hw unit of domain dram 2^-14 Joules
>[    4.913728] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
>[    4.913729] RAPL PMU: hw unit of domain psys 2^-14 Joules
>[    4.913921] Linux video capture interface: v2.00
>[    4.938087] AVX2 version of gcm_enc/dec engaged.
>[    4.938088] AES CTR mode by8 optimization enabled
>[    4.939165] Intel(R) Wireless WiFi driver for Linux
>[    4.939166] Copyright(c) 2003- 2015 Intel Corporation
>[    4.939750] iwlwifi 0000:03:00.0: enabling device (0000 -> 0002)
>[    4.943276] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b5c0)
>[    4.945921] uvcvideo: Failed to initialize entity for entity 6
>[    4.945922] uvcvideo: Failed to register entites (-22).
>[    4.945962] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/input/input9
>[    4.946012] usbcore: registered new interface driver uvcvideo
>[    4.946013] USB Video Class driver (1.1.1)
>[    4.947972] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
>[    4.948182] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-8265-34.ucode failed with error -2
>[    4.948190] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-8265-33.ucode failed with error -2
>[    4.948196] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-8265-32.ucode failed with error -2
>[    4.948202] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-8265-31.ucode failed with error -2
>[    4.949359] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-8265-30.ucode failed with error -2
>[    4.949374] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-8265-29.ucode failed with error -2
>[    4.949381] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-8265-28.ucode failed with error -2
>[    4.949386] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-8265-27.ucode failed with error -2
>[    4.949391] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-8265-26.ucode failed with error -2
>[    4.950686] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-8265-25.ucode failed with error -2
>[    4.954469] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-8265-24.ucode failed with error -2
>[    4.954491] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-8265-23.ucode failed with error -2
>[    4.957214] [drm:intel_power_well_enable [i915]] enabling power well 2
>[    4.957253] iwlwifi 0000:03:00.0: loaded firmware version 22.391740.0 op_mode iwlmvm
>[    4.973691] iwlwifi 0000:03:00.0: Detected Intel(R) Dual Band Wireless AC 8265, REV=0x230
>[    4.990308] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC298: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
>[    4.990310] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>[    4.990311] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
>[    4.990311] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
>[    4.990312] snd_hda_codec_realtek hdaudioC0D0:    inputs:
>[    4.990312] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
>[    4.990313] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
>[    5.030089] iwlwifi 0000:03:00.0: base HW address: 00:28:f8:54:b9:5b
>[    5.030421] kvm: disabled by bios
>[    5.044655] [drm:i915_audio_component_get_eld [i915]] Not valid for port B
>[    5.044671] [drm:i915_audio_component_get_eld [i915]] Not valid for port B
>[    5.044685] [drm:i915_audio_component_get_eld [i915]] Not valid for port B
>[    5.044696] [drm:i915_audio_component_get_eld [i915]] Not valid for port C
>[    5.044707] [drm:i915_audio_component_get_eld [i915]] Not valid for port C
>[    5.044717] [drm:i915_audio_component_get_eld [i915]] Not valid for port C
>[    5.044726] [drm:i915_audio_component_get_eld [i915]] Not valid for port D
>[    5.044736] [drm:i915_audio_component_get_eld [i915]] Not valid for port D
>[    5.044745] [drm:i915_audio_component_get_eld [i915]] Not valid for port D
>[    5.045661] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10
>[    5.045698] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
>[    5.045729] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
>[    5.045758] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
>[    5.045791] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
>[    5.045820] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
>[    5.045847] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
>[    5.056470] usb 1-7: USB disconnect, device number 3
>[    5.099848] intel_rapl: Found RAPL domain package
>[    5.099849] intel_rapl: Found RAPL domain core
>[    5.099849] intel_rapl: Found RAPL domain uncore
>[    5.099850] intel_rapl: Found RAPL domain dram
>[    5.104858] [drm:intel_power_well_disable [i915]] disabling power well 2
>[    5.110520] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
>[    5.110699] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
>[    5.110708] thermal thermal_zone3: failed to read out thermal zone (-61)
>[    5.111447] iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0
>[    5.367902] new mount options do not match the existing superblock, will be ignored
>[    5.374746] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
>[    5.374747] Bluetooth: BNEP filters: protocol multicast
>[    5.374749] Bluetooth: BNEP socket layer initialized
>[    5.544094] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready
>[    5.760425] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready
>[    5.763345] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
>[    5.966816] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
>[    6.186368] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
>[    6.255688] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
>[    7.072358] Bluetooth: hci0 command 0xfc09 tx timeout
>[    7.392406] [drm:edp_panel_vdd_off_sync [i915]] Turning eDP port A VDD off
>[    7.392480] [drm:edp_panel_vdd_off_sync [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x00000007
>[    7.392490] [drm:intel_power_well_disable [i915]] disabling DC off
>[    7.392500] [drm:skl_enable_dc6 [i915]] Enabling DC6
>[    7.392508] [drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 02
>[    9.726629] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
>[    9.770492] wlp3s0: authenticate with 08:bd:43:af:d0:2c
>[    9.785547] wlp3s0: send auth to 08:bd:43:af:d0:2c (try 1/3)
>[    9.794224] wlp3s0: authenticated
>[    9.796164] wlp3s0: associate with 08:bd:43:af:d0:2c (try 1/3)
>[    9.800284] wlp3s0: RX AssocResp from 08:bd:43:af:d0:2c (capab=0x431 status=0 aid=7)
>[    9.804041] wlp3s0: associated
>[    9.804099] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
>[   11.026504] FS-Cache: Loaded
>[   11.044459] FS-Cache: Netfs 'cifs' registered for caching
>[   11.044510] Key type cifs.spnego registered
>[   11.044514] Key type cifs.idmap registered
>[   11.044785] No dialect specified on mount. Default has changed to a more secure dialect, SMB2.1 or later (e.g. SMB3), from CIFS (SMB1). To use the less secure SMB1 dialect to access old servers which do not support SMB3 (or SMB2.1) specify vers=1.0 on mount.
>[   11.044840] No dialect specified on mount. Default has changed to a more secure dialect, SMB2.1 or later (e.g. SMB3), from CIFS (SMB1). To use the less secure SMB1 dialect to access old servers which do not support SMB3 (or SMB2.1) specify vers=1.0 on mount.
>[   11.044864] No dialect specified on mount. Default has changed to a more secure dialect, SMB2.1 or later (e.g. SMB3), from CIFS (SMB1). To use the less secure SMB1 dialect to access old servers which do not support SMB3 (or SMB2.1) specify vers=1.0 on mount.
>[   11.044881] No dialect specified on mount. Default has changed to a more secure dialect, SMB2.1 or later (e.g. SMB3), from CIFS (SMB1). To use the less secure SMB1 dialect to access old servers which do not support SMB3 (or SMB2.1) specify vers=1.0 on mount.
>[   11.044889] No dialect specified on mount. Default has changed to a more secure dialect, SMB2.1 or later (e.g. SMB3), from CIFS (SMB1). To use the less secure SMB1 dialect to access old servers which do not support SMB3 (or SMB2.1) specify vers=1.0 on mount.
>[   11.046260] No dialect specified on mount. Default has changed to a more secure dialect, SMB2.1 or later (e.g. SMB3), from CIFS (SMB1). To use the less secure SMB1 dialect to access old servers which do not support SMB3 (or SMB2.1) specify vers=1.0 on mount.
>[   11.176558] CIFS VFS: cifs_mount failed w/return code = -112
>[   11.195307] CIFS VFS: cifs_mount failed w/return code = -112
>[   11.201220] CIFS VFS: cifs_mount failed w/return code = -112
>[   11.201235] CIFS VFS: cifs_mount failed w/return code = -112
>[   11.202328] CIFS VFS: cifs_mount failed w/return code = -112
>[   11.208540] CIFS VFS: cifs_mount failed w/return code = -112
>[   15.072306] Bluetooth: hci0: Failed to send firmware data (-110)

Actions: View

Attachments on bug 104195: 136356

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.