Attachment 138990 Details for Bug 106160 – dmesg booting without i915, then modprobing it

dmesg booting without i915, then modprobing it

macbook-21-dmesg (text/plain), 68.31 KB, created by Nicholas Bishop on 2018-04-23 03:17:13 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Nicholas Bishop

Created: 2018-04-23 03:17:13 UTC

Size: 68.31 KB

patch

obsolete

>[    0.000000] Linux version 4.14.31.never-debug+ (nbishop@jordan) (gcc version 4.9.x 20150123 (prerelease) (4.9.2_cos_gg_4.9.2-r172-0c5a656a1322e137fa4a251f2ccc6c4022918c0a_4.9.2-r172)) #15 SMP Fri Apr 20 16:07:05 EDT 2018
>[    0.000000] Command line: BOOT_IMAGE=/syslinux/vmlinuz.A init=/sbin/init boot=local rootwait ro noresume noswap loglevel=7 noinitrd console=ttyUSB0 i915.modeset=1 cros_efi cros_debug drm.debug=0xe root=PARTUUID=2BF078D5-C0AA-4D4C-A865-6FAED4AA72D7
>[    0.000000] x86/fpu: x87 FPU will use FXSAVE
>[    0.000000] e820: BIOS-provided physical RAM map:
>[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable
>[    0.000000] BIOS-e820: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS
>[    0.000000] BIOS-e820: [mem 0x0000000000090000-0x000000000009ffff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000bffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007e0f7fff] usable
>[    0.000000] BIOS-e820: [mem 0x000000007e0f8000-0x000000007e2f8fff] ACPI NVS
>[    0.000000] BIOS-e820: [mem 0x000000007e2f9000-0x000000007ee4afff] usable
>[    0.000000] BIOS-e820: [mem 0x000000007ee4b000-0x000000007ee70fff] reserved
>[    0.000000] BIOS-e820: [mem 0x000000007ee71000-0x000000007ee7ffff] usable
>[    0.000000] BIOS-e820: [mem 0x000000007ee80000-0x000000007eeaafff] reserved
>[    0.000000] BIOS-e820: [mem 0x000000007eeab000-0x000000007eeb6fff] usable
>[    0.000000] BIOS-e820: [mem 0x000000007eeb7000-0x000000007eebbfff] ACPI data
>[    0.000000] BIOS-e820: [mem 0x000000007eebc000-0x000000007eebdfff] usable
>[    0.000000] BIOS-e820: [mem 0x000000007eebe000-0x000000007eeeefff] ACPI NVS
>[    0.000000] BIOS-e820: [mem 0x000000007eeef000-0x000000007eefefff] ACPI data
>[    0.000000] BIOS-e820: [mem 0x000000007eeff000-0x000000007fffffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000f00f8000-0x00000000f00f8fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fffb0000-0x00000000fffdffff] reserved
>[    0.000000] NX (Execute Disable) protection: active
>[    0.000000] efi: EFI v1.10 by Apple
>[    0.000000] efi:  ACPI=0x7eefd000  ACPI 2.0=0x7eefd014  SMBIOS=0x7eebf000 
>[    0.000000] efi: No EFI runtime due to 32/64-bit mismatch with kernel
>[    0.000000] random: fast init done
>[    0.000000] SMBIOS 2.4 present.
>[    0.000000] DMI: Apple Inc. MacBook2,1/Mac-F4208CAA, BIOS     MB21.88Z.00A5.B07.0706270922 06/27/07
>[    0.000000] tsc: Fast TSC calibration using PIT
>[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
>[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
>[    0.000000] e820: last_pfn = 0x7eebe max_arch_pfn = 0x400000000
>[    0.000000] MTRR default type: uncachable
>[    0.000000] MTRR fixed ranges enabled:
>[    0.000000]   00000-9FFFF write-back
>[    0.000000]   A0000-BFFFF uncachable
>[    0.000000]   C0000-CFFFF write-protect
>[    0.000000]   D0000-DFFFF uncachable
>[    0.000000]   E0000-FFFFF write-protect
>[    0.000000] MTRR variable ranges enabled:
>[    0.000000]   0 base 0FFE00000 mask FFFE00000 write-protect
>[    0.000000]   1 base 000000000 mask F80000000 write-back
>[    0.000000]   2 base 07F000000 mask FFF000000 uncachable
>[    0.000000]   3 base 07EF00000 mask FFFF00000 uncachable
>[    0.000000]   4 disabled
>[    0.000000]   5 disabled
>[    0.000000]   6 disabled
>[    0.000000]   7 disabled
>[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
>[    0.000000] Scanning 1 areas for low memory corruption
>[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
>[    0.000000] BRK [0x035b0000, 0x035b0fff] PGTABLE
>[    0.000000] BRK [0x035b1000, 0x035b1fff] PGTABLE
>[    0.000000] BRK [0x035b2000, 0x035b2fff] PGTABLE
>[    0.000000] BRK [0x035b3000, 0x035b3fff] PGTABLE
>[    0.000000] BRK [0x035b4000, 0x035b4fff] PGTABLE
>[    0.000000] BRK [0x035b5000, 0x035b5fff] PGTABLE
>[    0.000000] Secure boot could not be determined
>[    0.000000] ACPI: Early table checksum verification disabled
>[    0.000000] ACPI: RSDP 0x000000007EEFD014 000024 (v02 APPLE )
>[    0.000000] ACPI: XSDT 0x000000007EEFD1C0 00006C (v01 APPLE  Apple00  000000A5      01000013)
>[    0.000000] ACPI: FACP 0x000000007EEFB000 0000F4 (v03 APPLE  Apple00  000000A5 Loki 0000005F)
>[    0.000000] ACPI: DSDT 0x000000007EEF0000 0041E4 (v01 APPLE  MacBook  00020001 INTL 20050309)
>[    0.000000] ACPI: FACS 0x000000007EEC0000 000040
>[    0.000000] ACPI: FACS 0x000000007EEC0000 000040
>[    0.000000] ACPI: HPET 0x000000007EEFA000 000038 (v01 APPLE  Apple00  00000001 Loki 0000005F)
>[    0.000000] ACPI: APIC 0x000000007EEF9000 000068 (v01 APPLE  Apple00  00000001 Loki 0000005F)
>[    0.000000] ACPI: MCFG 0x000000007EEF8000 00003C (v01 APPLE  Apple00  00000001 Loki 0000005F)
>[    0.000000] ACPI: ASF! 0x000000007EEF7000 0000A0 (v32 APPLE  Apple00  00000001 Loki 0000005F)
>[    0.000000] ACPI: SBST 0x000000007EEF6000 000030 (v01 APPLE  Apple00  00000001 Loki 0000005F)
>[    0.000000] ACPI: ECDT 0x000000007EEF5000 000053 (v01 APPLE  Apple00  00000001 Loki 0000005F)
>[    0.000000] ACPI: SSDT 0x000000007EEB9000 0001DA (v01 APPLE  SataAhci 00001000 INTL 20050309)
>[    0.000000] ACPI: SSDT 0x000000007EEEF000 0004DC (v01 APPLE  CpuPm    00003000 INTL 20050309)
>[    0.000000] ACPI: DMI detected to setup _OSI("Darwin"): Apple hardware
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] Zone ranges:
>[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
>[    0.000000]   DMA32    [mem 0x0000000001000000-0x000000007eebdfff]
>[    0.000000]   Normal   empty
>[    0.000000] Movable zone start for each node
>[    0.000000] Early memory node ranges
>[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000008efff]
>[    0.000000]   node   0: [mem 0x0000000000090000-0x000000000009ffff]
>[    0.000000]   node   0: [mem 0x0000000000100000-0x000000007e0f7fff]
>[    0.000000]   node   0: [mem 0x000000007e2f9000-0x000000007ee4afff]
>[    0.000000]   node   0: [mem 0x000000007ee71000-0x000000007ee7ffff]
>[    0.000000]   node   0: [mem 0x000000007eeab000-0x000000007eeb6fff]
>[    0.000000]   node   0: [mem 0x000000007eebc000-0x000000007eebdfff]
>[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000007eebdfff]
>[    0.000000] On node 0 totalpages: 519173
>[    0.000000]   DMA zone: 64 pages used for memmap
>[    0.000000]   DMA zone: 23 pages reserved
>[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
>[    0.000000]   DMA32 zone: 8059 pages used for memmap
>[    0.000000]   DMA32 zone: 515175 pages, LIFO batch:31
>[    0.000000] Reserving Intel graphics memory at 0x000000007f000000-0x000000007fffffff
>[    0.000000] ACPI: PM-Timer IO Port: 0x408
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>[    0.000000] ACPI: IRQ0 used by override.
>[    0.000000] ACPI: IRQ9 used by override.
>[    0.000000] Using ACPI (MADT) for SMP configuration information
>[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
>[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
>[    0.000000] e820: [mem 0x80000000-0xf00f7fff] available for PCI devices
>[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
>[    0.000000] efi: Setup done, disabling due to 32/64-bit mismatch
>[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1
>[    0.000000] percpu: Embedded 43 pages/cpu @ffff88007cc00000 s139240 r8192 d28696 u1048576
>[    0.000000] pcpu-alloc: s139240 r8192 d28696 u1048576 alloc=1*2097152
>[    0.000000] pcpu-alloc: [0] 0 1 
>[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 511027
>[    0.000000] Kernel command line: BOOT_IMAGE=/syslinux/vmlinuz.A init=/sbin/init boot=local rootwait ro noresume noswap loglevel=7 noinitrd console=ttyUSB0 i915.modeset=1 cros_efi cros_debug drm.debug=0xe root=PARTUUID=2BF078D5-C0AA-4D4C-A865-6FAED4AA72D7
>[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
>[    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>[    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>[    0.000000] Memory: 1986904K/2076692K available (10252K kernel code, 1364K rwdata, 3092K rodata, 3936K init, 904K bss, 89788K reserved, 0K cma-reserved)
>[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
>[    0.000000] Kernel/User page tables isolation: enabled
>[    0.000000] ftrace: allocating 34349 entries in 135 pages
>[    0.000000] Hierarchical RCU implementation.
>[    0.000000] 	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2.
>[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
>[    0.000000] NR_IRQS: 16640, nr_irqs: 440, preallocated irqs: 16
>[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
>[    0.000000] hpet clockevent registered
>[    0.000000] tsc: Fast TSC calibration using PIT
>[    0.001000] tsc: Detected 2161.165 MHz processor
>[    0.001000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4322.33 BogoMIPS (lpj=2161165)
>[    0.001000] pid_max: default: 32768 minimum: 301
>[    0.001000] ACPI: Core revision 20170728
>[    0.053479] ACPI: 3 ACPI AML tables successfully acquired and loaded
>[    0.053680] Security Framework initialized
>[    0.053689] Yama: becoming mindful.
>[    0.054024] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
>[    0.054049] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
>[    0.055193] CPU: Physical Processor ID: 0
>[    0.055196] CPU: Processor Core ID: 0
>[    0.055199] mce: CPU supports 6 MCE banks
>[    0.055223] CPU0: Thermal monitoring enabled (TM2)
>[    0.055228] process: using mwait in idle threads
>[    0.055234] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
>[    0.055237] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
>[    0.055242] Spectre V2 : Vulnerable: Minimal generic ASM retpoline
>[    0.055419] Freeing SMP alternatives memory: 20K
>[    0.056034] smpboot: Max logical packages: 1
>[    0.056772] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>[    0.067000] smpboot: CPU0: Intel(R) Core(TM)2 CPU         T7400  @ 2.16GHz (family: 0x6, model: 0xf, stepping: 0x6)
>[    0.067000] Performance Events: PEBS fmt0-, Core2 events, Intel PMU driver.
>[    0.067000] core: PEBS disabled due to CPU errata
>[    0.067000] ... version:                2
>[    0.067000] ... bit width:              40
>[    0.067000] ... generic registers:      2
>[    0.067000] ... value mask:             000000ffffffffff
>[    0.067000] ... max period:             000000007fffffff
>[    0.067000] ... fixed-purpose events:   3
>[    0.067000] ... event mask:             0000000700000003
>[    0.067000] Hierarchical SRCU implementation.
>[    0.069412] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
>[    0.069445] smp: Bringing up secondary CPUs ...
>[    0.069893] x86: Booting SMP configuration:
>[    0.069896] .... node  #0, CPUs:      #1
>[    0.073322] smp: Brought up 1 node, 2 CPUs
>[    0.073328] smpboot: Total of 2 processors activated (8644.66 BogoMIPS)
>[    0.075386] devtmpfs: initialized
>[    0.077295] PM: Registering ACPI NVS region [mem 0x0008f000-0x0008ffff] (4096 bytes)
>[    0.077306] PM: Registering ACPI NVS region [mem 0x7e0f8000-0x7e2f8fff] (2101248 bytes)
>[    0.079114] PM: Registering ACPI NVS region [mem 0x7eebe000-0x7eeeefff] (200704 bytes)
>[    0.079603] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
>[    0.079614] futex hash table entries: 512 (order: 3, 32768 bytes)
>[    0.079843] pinctrl core: initialized pinctrl subsystem
>[    0.080633] RTC time:  3:13:22, date: 04/23/18
>[    0.081259] NET: Registered protocol family 16
>[    0.083058] cpuidle: using governor ladder
>[    0.083058] cpuidle: using governor menu
>[    0.083481] ACPI: bus type PCI registered
>[    0.084024] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xf0000000-0xffffffff] (base 0xf0000000)
>[    0.084035] PCI: not using MMCONFIG
>[    0.084035] PCI: Using configuration type 1 for base access
>[    0.102240] gpio-f7188x: Not a Fintek device at 0x0000002e
>[    0.102262] gpio-f7188x: Not a Fintek device at 0x0000004e
>[    0.102794] ACPI: Disabled all _OSI OS vendors
>[    0.102798] ACPI: Added _OSI(Module Device)
>[    0.102800] ACPI: Added _OSI(Processor Device)
>[    0.102803] ACPI: Added _OSI(3.0 _SCP Extensions)
>[    0.102805] ACPI: Added _OSI(Processor Aggregator Device)
>[    0.102819] ACPI: Added _OSI(Darwin)
>[    0.102831] ACPI: EC: EC started
>[    0.102833] ACPI: EC: interrupt blocked
>[    0.105528] ACPI: \: Used as first EC
>[    0.105538] ACPI: \: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
>[    0.105547] ACPI: \: Used as boot ECDT EC to handle transactions
>[    0.117008] ACPI: BIOS _OSI(Darwin) query honored via DMI
>[    0.123596] ACPI: Dynamic OEM Table Load:
>[    0.123609] ACPI: SSDT 0xFFFF880079A25000 0002AE (v01 APPLE  Cpu0Ist  00003000 INTL 20050309)
>[    0.125416] ACPI: Dynamic OEM Table Load:
>[    0.125426] ACPI: SSDT 0xFFFF880079A25400 0002A0 (v01 APPLE  Cpu0Cst  00003001 INTL 20050309)
>[    0.131385] ACPI: Dynamic OEM Table Load:
>[    0.131395] ACPI: SSDT 0xFFFF880079848180 000087 (v01 APPLE  Cpu1Ist  00003000 INTL 20050309)
>[    0.132788] ACPI: Dynamic OEM Table Load:
>[    0.132798] ACPI: SSDT 0xFFFF880079848240 000085 (v01 APPLE  Cpu1Cst  00003000 INTL 20050309)
>[    0.135153] ACPI: Interpreter enabled
>[    0.135233] ACPI: (supports S0 S3 S5)
>[    0.135236] ACPI: Using IOAPIC for interrupt routing
>[    0.135440] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xf0000000-0xffffffff] (base 0xf0000000)
>[    0.148055] PCI: MMCONFIG at [mem 0xf0000000-0xffffffff] reserved in ACPI motherboard resources
>[    0.148060] PCI: MMCONFIG for 0000 [bus00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) (size reduced!)
>[    0.148089] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>[    0.150345] ACPI: Enabled 11 GPEs in block 00 to 1F
>[    0.215656] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
>[    0.215681] acpi PNP0A08:00: _OSC: OS assumes control of [PCIeHotplug SHPCHotplug AER PCIeCapability]
>[    0.215694] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
>[    0.217992] PCI host bridge to bus 0000:00
>[    0.218008] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
>[    0.218017] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
>[    0.218026] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
>[    0.218035] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
>[    0.218044] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
>[    0.218054] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
>[    0.218062] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
>[    0.218071] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
>[    0.218080] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
>[    0.218088] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
>[    0.218097] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
>[    0.218105] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
>[    0.218114] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
>[    0.218122] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
>[    0.218131] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
>[    0.218139] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
>[    0.218148] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff window]
>[    0.218158] pci_bus 0000:00: root bus resource [bus 00-ff]
>[    0.218183] pci 0000:00:00.0: [8086:27a0] type 00 class 0x060000
>[    0.218720] pci 0000:00:02.0: [8086:27a2] type 00 class 0x030000
>[    0.218735] pci 0000:00:02.0: reg 0x10: [mem 0x90380000-0x903fffff]
>[    0.218742] pci 0000:00:02.0: reg 0x14: [io  0x20e0-0x20e7]
>[    0.218749] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff pref]
>[    0.218756] pci 0000:00:02.0: reg 0x1c: [mem 0x90400000-0x9043ffff]
>[    0.219377] pci 0000:00:02.1: [8086:27a6] type 00 class 0x038000
>[    0.219389] pci 0000:00:02.1: reg 0x10: [mem 0x90300000-0x9037ffff]
>[    0.219928] pci 0000:00:07.0: [8086:27a3] type 00 class 0x110100
>[    0.219942] pci 0000:00:07.0: reg 0x10: [mem 0x90444000-0x90444fff]
>[    0.220511] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
>[    0.220541] pci 0000:00:1b.0: reg 0x10: [mem 0x90440000-0x90443fff 64bit]
>[    0.220672] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>[    0.221313] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
>[    0.221468] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>[    0.222117] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
>[    0.222273] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
>[    0.222933] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
>[    0.222995] pci 0000:00:1d.0: reg 0x20: [io  0x2080-0x209f]
>[    0.223653] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
>[    0.223716] pci 0000:00:1d.1: reg 0x20: [io  0x2060-0x207f]
>[    0.224378] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
>[    0.224440] pci 0000:00:1d.2: reg 0x20: [io  0x2040-0x205f]
>[    0.225107] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
>[    0.225169] pci 0000:00:1d.3: reg 0x20: [io  0x2020-0x203f]
>[    0.225839] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
>[    0.225865] pci 0000:00:1d.7: reg 0x10: [mem 0x90445400-0x904457ff]
>[    0.225973] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>[    0.226596] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
>[    0.227269] pci 0000:00:1f.0: [8086:27b9] type 00 class 0x060100
>[    0.227412] pci 0000:00:1f.0: quirk: [io  0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO
>[    0.227420] pci 0000:00:1f.0: quirk: [io  0x0500-0x053f] claimed by ICH6 GPIO
>[    0.227426] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 000f)
>[    0.227431] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 1640 (mask 000f)
>[    0.227438] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0300 (mask 001f)
>[    0.228031] pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018f
>[    0.228055] pci 0000:00:1f.1: reg 0x10: [io  0x20d8-0x20df]
>[    0.228067] pci 0000:00:1f.1: reg 0x14: [io  0x20f4-0x20f7]
>[    0.228079] pci 0000:00:1f.1: reg 0x18: [io  0x20d0-0x20d7]
>[    0.228091] pci 0000:00:1f.1: reg 0x1c: [io  0x20f0-0x20f3]
>[    0.228103] pci 0000:00:1f.1: reg 0x20: [io  0x20b0-0x20bf]
>[    0.228729] pci 0000:00:1f.2: [8086:27c5] type 00 class 0x010601
>[    0.228757] pci 0000:00:1f.2: reg 0x10: [io  0x20c8-0x20cf]
>[    0.228769] pci 0000:00:1f.2: reg 0x14: [io  0x20ec-0x20ef]
>[    0.228781] pci 0000:00:1f.2: reg 0x18: [io  0x20c0-0x20c7]
>[    0.228793] pci 0000:00:1f.2: reg 0x1c: [io  0x20e8-0x20eb]
>[    0.228805] pci 0000:00:1f.2: reg 0x20: [io  0x20a0-0x20af]
>[    0.228817] pci 0000:00:1f.2: reg 0x24: [mem 0x90445000-0x904453ff]
>[    0.228895] pci 0000:00:1f.2: PME# supported from D3hot
>[    0.229514] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
>[    0.229595] pci 0000:00:1f.3: reg 0x20: [io  0xefa0-0xefbf]
>[    0.230415] pci 0000:01:00.0: [11ab:4362] type 00 class 0x020000
>[    0.230462] pci 0000:01:00.0: reg 0x10: [mem 0x90200000-0x90203fff 64bit]
>[    0.230478] pci 0000:01:00.0: reg 0x18: [io  0x1000-0x10ff]
>[    0.230538] pci 0000:01:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
>[    0.230677] pci 0000:01:00.0: supports D1 D2
>[    0.230680] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>[    0.231078] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
>[    0.231099] pci 0000:00:1c.0: PCI bridge to [bus 01]
>[    0.231106] pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
>[    0.231111] pci 0000:00:1c.0:   bridge window [mem 0x90200000-0x902fffff]
>[    0.231312] pci 0000:02:00.0: [168c:0024] type 00 class 0x028000
>[    0.231356] pci 0000:02:00.0: reg 0x10: [mem 0x90100000-0x9010ffff 64bit]
>[    0.231564] pci 0000:02:00.0: supports D1
>[    0.231566] pci 0000:02:00.0: PME# supported from D0 D1 D3hot
>[    0.231959] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
>[    0.231979] pci 0000:00:1c.1: PCI bridge to [bus 02]
>[    0.231989] pci 0000:00:1c.1:   bridge window [mem 0x90100000-0x901fffff]
>[    0.232174] pci 0000:03:03.0: [11c1:5811] type 00 class 0x0c0010
>[    0.232203] pci 0000:03:03.0: reg 0x10: [mem 0x90000000-0x90000fff]
>[    0.232345] pci 0000:03:03.0: supports D1 D2
>[    0.232347] pci 0000:03:03.0: PME# supported from D0 D1 D2 D3hot
>[    0.232747] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode)
>[    0.232756] pci 0000:00:1e.0:   bridge window [mem 0x90000000-0x900fffff]
>[    0.232771] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
>[    0.232778] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
>[    0.232786] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
>[    0.232793] pci 0000:00:1e.0:   bridge window [mem 0x000c0000-0x000c3fff window] (subtractive decode)
>[    0.232801] pci 0000:00:1e.0:   bridge window [mem 0x000c4000-0x000c7fff window] (subtractive decode)
>[    0.232808] pci 0000:00:1e.0:   bridge window [mem 0x000c8000-0x000cbfff window] (subtractive decode)
>[    0.232816] pci 0000:00:1e.0:   bridge window [mem 0x000cc000-0x000cffff window] (subtractive decode)
>[    0.232823] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
>[    0.232830] pci 0000:00:1e.0:   bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
>[    0.232837] pci 0000:00:1e.0:   bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
>[    0.232844] pci 0000:00:1e.0:   bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
>[    0.232851] pci 0000:00:1e.0:   bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
>[    0.232858] pci 0000:00:1e.0:   bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
>[    0.232865] pci 0000:00:1e.0:   bridge window [mem 0x000e8000-0x000ebfff window] (subtractive decode)
>[    0.232872] pci 0000:00:1e.0:   bridge window [mem 0x000ec000-0x000effff window] (subtractive decode)
>[    0.232879] pci 0000:00:1e.0:   bridge window [mem 0x000f0000-0x000fffff window] (subtractive decode)
>[    0.232888] pci 0000:00:1e.0:   bridge window [mem 0x80000000-0xfebfffff window] (subtractive decode)
>[    0.232913] pci_bus 0000:00: on NUMA node 0
>[    0.234368] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
>[    0.235106] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
>[    0.235831] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
>[    0.236567] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
>[    0.237298] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
>[    0.238025] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
>[    0.238751] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
>[    0.239480] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 11 12 14 15) *0, disabled.
>[    0.242708] ACPI: EC: interrupt unblocked
>[    0.242724] ACPI: EC: event unblocked
>[    0.242739] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
>[    0.242749] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events
>[    0.243216] pci 0000:00:02.0: vgaarb: setting as boot VGA device
>[    0.243216] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
>[    0.243216] pci 0000:00:02.0: vgaarb: bridge control possible
>[    0.243216] vgaarb: loaded
>[    0.245472] SCSI subsystem initialized
>[    0.245520] libata version 3.00 loaded.
>[    0.245520] ACPI: bus type USB registered
>[    0.246124] usbcore: registered new interface driver usbfs
>[    0.246212] usbcore: registered new interface driver hub
>[    0.246280] usbcore: registered new device driver usb
>[    0.246743] Registered efivars operations
>[    0.246922] Advanced Linux Sound Architecture Driver Initialized.
>[    0.246925] PCI: Using ACPI for IRQ routing
>[    0.252341] PCI: pci_cache_line_size set to 64 bytes
>[    0.252428] e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff]
>[    0.252448] e820: reserve RAM buffer [mem 0x7e0f8000-0x7fffffff]
>[    0.252457] e820: reserve RAM buffer [mem 0x7ee4b000-0x7fffffff]
>[    0.252465] e820: reserve RAM buffer [mem 0x7ee80000-0x7fffffff]
>[    0.252474] e820: reserve RAM buffer [mem 0x7eeb7000-0x7fffffff]
>[    0.252482] e820: reserve RAM buffer [mem 0x7eebe000-0x7fffffff]
>[    0.254255] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
>[    0.254266] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>[    0.254273] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
>[    0.256033] clocksource: Switched to clocksource hpet
>[    0.360688] pnp: PnP ACPI init
>[    0.361301] system 00:00: [mem 0xf0000000-0xf3ffffff] could not be reserved
>[    0.361315] system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved
>[    0.361330] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
>[    0.361344] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
>[    0.361358] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
>[    0.361371] system 00:00: [mem 0xfed20000-0xfed8ffff] has been reserved
>[    0.361395] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.364910] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
>[    0.364933] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
>[    0.365297] pnp 00:02: disabling [io  0x1640-0x164f] because it overlaps 0000:00:1c.0 BAR 13 [io  0x1000-0x1fff]
>[    0.365525] system 00:02: [io  0x0680-0x06ef] has been reserved
>[    0.365540] system 00:02: [io  0x0800-0x080f] has been reserved
>[    0.365553] system 00:02: [io  0x0810-0x0817] has been reserved
>[    0.365567] system 00:02: [io  0x0400-0x047f] has been reserved
>[    0.365580] system 00:02: [io  0x0500-0x053f] has been reserved
>[    0.365601] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.365835] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
>[    0.366264] pnp: PnP ACPI: found 4 devices
>[    0.372516] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
>[    0.372548] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window
>[    0.372578] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
>[    0.372596] pci 0000:00:1c.1: bridge window [io  0x1000-0x0fff] to [bus 02] add_size 1000
>[    0.372605] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
>[    0.372669] pci 0000:00:1c.0: BAR 15: assigned [mem 0x90500000-0x906fffff 64bit pref]
>[    0.372687] pci 0000:00:1c.1: BAR 15: assigned [mem 0x90700000-0x908fffff 64bit pref]
>[    0.372693] pci 0000:00:1c.1: BAR 13: assigned [io  0x3000-0x3fff]
>[    0.372709] pci 0000:01:00.0: BAR 6: assigned [mem 0x90220000-0x9023ffff pref]
>[    0.372714] pci 0000:00:1c.0: PCI bridge to [bus 01]
>[    0.372719] pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
>[    0.372727] pci 0000:00:1c.0:   bridge window [mem 0x90200000-0x902fffff]
>[    0.372733] pci 0000:00:1c.0:   bridge window [mem 0x90500000-0x906fffff 64bit pref]
>[    0.372742] pci 0000:00:1c.1: PCI bridge to [bus 02]
>[    0.372747] pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
>[    0.372754] pci 0000:00:1c.1:   bridge window [mem 0x90100000-0x901fffff]
>[    0.372760] pci 0000:00:1c.1:   bridge window [mem 0x90700000-0x908fffff 64bit pref]
>[    0.372770] pci 0000:00:1e.0: PCI bridge to [bus 03]
>[    0.372778] pci 0000:00:1e.0:   bridge window [mem 0x90000000-0x900fffff]
>[    0.372791] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
>[    0.372794] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
>[    0.372796] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
>[    0.372798] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
>[    0.372801] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
>[    0.372803] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
>[    0.372805] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
>[    0.372808] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
>[    0.372810] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
>[    0.372812] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
>[    0.372814] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
>[    0.372817] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
>[    0.372819] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
>[    0.372821] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
>[    0.372824] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
>[    0.372826] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window]
>[    0.372828] pci_bus 0000:00: resource 20 [mem 0x80000000-0xfebfffff window]
>[    0.372831] pci_bus 0000:01: resource 0 [io  0x1000-0x1fff]
>[    0.372833] pci_bus 0000:01: resource 1 [mem 0x90200000-0x902fffff]
>[    0.372835] pci_bus 0000:01: resource 2 [mem 0x90500000-0x906fffff 64bit pref]
>[    0.372838] pci_bus 0000:02: resource 0 [io  0x3000-0x3fff]
>[    0.372840] pci_bus 0000:02: resource 1 [mem 0x90100000-0x901fffff]
>[    0.372842] pci_bus 0000:02: resource 2 [mem 0x90700000-0x908fffff 64bit pref]
>[    0.372845] pci_bus 0000:03: resource 1 [mem 0x90000000-0x900fffff]
>[    0.372847] pci_bus 0000:03: resource 4 [io  0x0000-0x0cf7 window]
>[    0.372850] pci_bus 0000:03: resource 5 [io  0x0d00-0xffff window]
>[    0.372852] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window]
>[    0.372854] pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000c3fff window]
>[    0.372856] pci_bus 0000:03: resource 8 [mem 0x000c4000-0x000c7fff window]
>[    0.372859] pci_bus 0000:03: resource 9 [mem 0x000c8000-0x000cbfff window]
>[    0.372861] pci_bus 0000:03: resource 10 [mem 0x000cc000-0x000cffff window]
>[    0.372863] pci_bus 0000:03: resource 11 [mem 0x000d0000-0x000d3fff window]
>[    0.372865] pci_bus 0000:03: resource 12 [mem 0x000d4000-0x000d7fff window]
>[    0.372868] pci_bus 0000:03: resource 13 [mem 0x000d8000-0x000dbfff window]
>[    0.372870] pci_bus 0000:03: resource 14 [mem 0x000dc000-0x000dffff window]
>[    0.372872] pci_bus 0000:03: resource 15 [mem 0x000e0000-0x000e3fff window]
>[    0.372875] pci_bus 0000:03: resource 16 [mem 0x000e4000-0x000e7fff window]
>[    0.372877] pci_bus 0000:03: resource 17 [mem 0x000e8000-0x000ebfff window]
>[    0.372879] pci_bus 0000:03: resource 18 [mem 0x000ec000-0x000effff window]
>[    0.372881] pci_bus 0000:03: resource 19 [mem 0x000f0000-0x000fffff window]
>[    0.372884] pci_bus 0000:03: resource 20 [mem 0x80000000-0xfebfffff window]
>[    0.373575] NET: Registered protocol family 2
>[    0.374369] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
>[    0.374449] TCP bind hash table entries: 16384 (order: 7, 524288 bytes)
>[    0.374710] TCP: Hash tables configured (established 16384 bind 16384)
>[    0.374867] UDP hash table entries: 1024 (order: 4, 98304 bytes)
>[    0.374932] UDP-Lite hash table entries: 1024 (order: 4, 98304 bytes)
>[    0.375288] NET: Registered protocol family 1
>[    0.375339] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
>[    0.389477] pci 0000:00:1d.7: enabling device (0000 -> 0002)
>[    0.393043] PCI: CLS mismatch (256 != 64), using 64 bytes
>[    0.394866] Scanning for low memory corruption every 60 seconds
>[    0.394887] efifb: dmi detected MacBook2,1 - framebuffer at 0x80000000 (1280x800, stride 8192)
>[    0.397804] workingset: timestamp_bits=46 max_order=19 bucket_order=0
>[    0.419276] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
>[    0.419375] io scheduler noop registered
>[    0.419378] io scheduler deadline registered
>[    0.419645] io scheduler cfq registered (default)
>[    0.419647] io scheduler mq-deadline registered
>[    0.419650] io scheduler kyber registered
>[    0.425293] pciehp 0000:00:1c.0:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- LLActRep+
>[    0.425561] pciehp 0000:00:1c.1:pcie004: Slot #1 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- LLActRep+
>[    0.426061] vmlfb: initializing
>[    0.426233] efifb: probing for efifb
>[    0.426282] efifb: framebuffer at 0x80000000, using 6400k, total 6400k
>[    0.426285] efifb: mode is 1280x800x32, linelength=8192, pages=1
>[    0.426287] efifb: scrolling: redraw
>[    0.426290] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
>[    0.426611] fb0: EFI VGA frame buffer device
>[    0.426655] intel_idle: does not run on family 6 model 15
>[    0.427112] ACPI: AC Adapter [ADP1] (on-line)
>[    0.427620] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
>[    0.427765] ACPI: Lid Switch [LID0]
>[    0.428080] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
>[    0.428144] ACPI: Power Button [PWRB]
>[    0.428447] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
>[    0.428510] ACPI: Sleep Button [SLPB]
>[    0.428825] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
>[    0.428853] ACPI: Power Button [PWRF]
>[    0.429829] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
>[    0.430435] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4
>[    0.431521] Monitor-Mwait will be used to enter C-1 state
>[    0.431539] Monitor-Mwait will be used to enter C-2 state
>[    0.431554] Monitor-Mwait will be used to enter C-3 state
>[    0.431565] tsc: Marking TSC unstable due to TSC halts in idle
>[    0.434570] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
>[    0.438346] Non-volatile memory driver v1.3
>[    0.438647] intel_rng: FWH not detected
>[    0.438706] Linux agpgart interface v0.103
>[    0.439522] usbcore: registered new interface driver udl
>[    0.457180] loop: module loaded
>[    0.521287] drbd: initialized. Version: 8.4.10 (api:1/proto:86-101)
>[    0.521293] drbd: built-in
>[    0.521295] drbd: registered as block device major 147
>[    0.521418] lkdtm: No crash points registered, enable through debugfs
>[    0.522439] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20170728/utaddress-247)
>[    0.522450] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[    0.522460] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000053B (\GPIO) (20170728/utaddress-247)
>[    0.522467] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[    0.522474] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000053B (\GPIO) (20170728/utaddress-247)
>[    0.522482] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[    0.522484] lpc_ich: Resource conflict(s) found affecting gpio_ich
>[    0.523835] ahci 0000:00:1f.2: version 3.0
>[    0.526045] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x4 impl SATA mode
>[    0.526051] ahci 0000:00:1f.2: flags: 64bit ncq ilck pm led clo pio slum part 
>[    0.529124] scsi host0: ahci
>[    0.529742] scsi host1: ahci
>[    0.530345] scsi host2: ahci
>[    0.530914] scsi host3: ahci
>[    0.531268] ata1: DUMMY
>[    0.531271] ata2: DUMMY
>[    0.531276] ata3: SATA max UDMA/133 abar m1024@0x90445000 port 0x90445200 irq 26
>[    0.531278] ata4: DUMMY
>[    0.531499] ata_piix 0000:00:1f.1: version 2.13
>[    0.539469] scsi host4: ata_piix
>[    0.539981] scsi host5: ata_piix
>[    0.540281] ata5: PATA max UDMA/100 cmd 0x20d8 ctl 0x20f4 bmdma 0x20b0 irq 18
>[    0.540284] ata6: PATA max UDMA/100 cmd 0x20d0 ctl 0x20f0 bmdma 0x20b8 irq 18
>[    0.541889] mdio_bus fixed-0: GPIO lookup for consumer reset
>[    0.541891] mdio_bus fixed-0: using lookup tables for GPIO lookup
>[    0.541893] mdio_bus fixed-0: lookup for GPIO reset failed
>[    0.541903] libphy: Fixed MDIO Bus: probed
>[    0.541906] sky2: driver version 1.30
>[    0.542593] sky2 0000:01:00.0: Yukon-2 EC chip revision 2
>[    0.543648] sky2 0000:01:00.0 eth0: addr 00:17:f2:e0:12:cd
>[    0.544063] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>[    0.544078] ehci-pci: EHCI PCI platform driver
>[    0.545950] ehci-pci 0000:00:1d.7: EHCI Host Controller
>[    0.546218] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
>[    0.546246] ehci-pci 0000:00:1d.7: debug port 1
>[    0.550199] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
>[    0.550307] ehci-pci 0000:00:1d.7: irq 21, io mem 0x90445400
>[    0.557111] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
>[    0.557550] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>[    0.557555] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    0.557558] usb usb1: Product: EHCI Host Controller
>[    0.557562] usb usb1: Manufacturer: Linux 4.14.31.never-debug+ ehci_hcd
>[    0.557564] usb usb1: SerialNumber: 0000:00:1d.7
>[    0.558280] hub 1-0:1.0: USB hub found
>[    0.558323] hub 1-0:1.0: 8 ports detected
>[    0.559802] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>[    0.559817] ohci-pci: OHCI PCI platform driver
>[    0.559872] uhci_hcd: USB Universal Host Controller Interface driver
>[    0.561673] uhci_hcd 0000:00:1d.0: UHCI Host Controller
>[    0.561922] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>[    0.561943] uhci_hcd 0000:00:1d.0: detected 2 ports
>[    0.561979] uhci_hcd 0000:00:1d.0: irq 21, io base 0x00002080
>[    0.562302] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>[    0.562306] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    0.562309] usb usb2: Product: UHCI Host Controller
>[    0.562313] usb usb2: Manufacturer: Linux 4.14.31.never-debug+ uhci_hcd
>[    0.562316] usb usb2: SerialNumber: 0000:00:1d.0
>[    0.562971] hub 2-0:1.0: USB hub found
>[    0.563043] hub 2-0:1.0: 2 ports detected
>[    0.565507] uhci_hcd 0000:00:1d.1: UHCI Host Controller
>[    0.565757] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>[    0.565778] uhci_hcd 0000:00:1d.1: detected 2 ports
>[    0.565861] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00002060
>[    0.566173] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>[    0.566177] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    0.566180] usb usb3: Product: UHCI Host Controller
>[    0.566183] usb usb3: Manufacturer: Linux 4.14.31.never-debug+ uhci_hcd
>[    0.566186] usb usb3: SerialNumber: 0000:00:1d.1
>[    0.566832] hub 3-0:1.0: USB hub found
>[    0.566874] hub 3-0:1.0: 2 ports detected
>[    0.569305] uhci_hcd 0000:00:1d.2: UHCI Host Controller
>[    0.569559] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>[    0.569581] uhci_hcd 0000:00:1d.2: detected 2 ports
>[    0.569617] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00002040
>[    0.569920] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>[    0.569924] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    0.569927] usb usb4: Product: UHCI Host Controller
>[    0.569930] usb usb4: Manufacturer: Linux 4.14.31.never-debug+ uhci_hcd
>[    0.569934] usb usb4: SerialNumber: 0000:00:1d.2
>[    0.570616] hub 4-0:1.0: USB hub found
>[    0.570659] hub 4-0:1.0: 2 ports detected
>[    0.573161] uhci_hcd 0000:00:1d.3: UHCI Host Controller
>[    0.573404] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
>[    0.573427] uhci_hcd 0000:00:1d.3: detected 2 ports
>[    0.573510] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00002020
>[    0.573815] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>[    0.573820] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    0.573823] usb usb5: Product: UHCI Host Controller
>[    0.573826] usb usb5: Manufacturer: Linux 4.14.31.never-debug+ uhci_hcd
>[    0.573829] usb usb5: SerialNumber: 0000:00:1d.3
>[    0.574493] hub 5-0:1.0: USB hub found
>[    0.574535] hub 5-0:1.0: 2 ports detected
>[    0.575474] usbcore: registered new interface driver cdc_acm
>[    0.575477] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
>[    0.575579] usbcore: registered new interface driver usb-storage
>[    0.575649] usbcore: registered new interface driver ums-realtek
>[    0.575795] usbcore: registered new interface driver usbserial
>[    0.575845] usbcore: registered new interface driver usbserial_generic
>[    0.575894] usbserial: USB Serial support registered for generic
>[    0.575941] usbcore: registered new interface driver ftdi_sio
>[    0.575982] usbserial: USB Serial support registered for FTDI USB Serial Device
>[    0.576093] usbcore: registered new interface driver pl2303
>[    0.576137] usbserial: USB Serial support registered for pl2303
>[    0.576252] i8042: PNP: No PS/2 controller found.
>[    0.577674] rtc_cmos 00:03: RTC can wake from S4
>[    0.578101] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
>[    0.578154] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
>[    0.580097] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
>[    0.583739] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
>[    0.583867] iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x0460)
>[    0.584281] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>[    0.584324] iTCO_vendor_support: vendor-support=0
>[    0.584947] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
>[    0.585152] sdhci: Secure Digital Host Controller Interface driver
>[    0.585154] sdhci: Copyright(c) Pierre Ossman
>[    0.585316] ledtrig-cpu: registered to indicate activity on CPUs
>[    0.585430] hidraw: raw HID events driver (C) Jiri Kosina
>[    0.585721] usbcore: registered new interface driver usbhid
>[    0.585724] usbhid: USB HID core driver
>[    0.586146] ashmem: initialized
>[    0.586678] intel_rapl: driver does not support CPU family 6 model 15
>[    0.586739] Netfilter messages via NETLINK v0.30.
>[    0.587306] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>[    0.587412] ctnetlink v0.93: registering with nfnetlink.
>[    0.587619] ip_tables: (C) 2000-2006 Netfilter Core Team
>[    0.587834] Initializing XFRM netlink socket
>[    0.588870] NET: Registered protocol family 10
>[    0.590342] Segment Routing with IPv6
>[    0.590416] NET: Registered protocol family 17
>[    0.591552] microcode: sig=0x6f6, pf=0x20, revision=0xc7
>[    0.591765] microcode: Microcode Update Driver: v2.2.
>[    0.592578] registered taskstats version 1
>[    0.592729] kmemleak: Kernel memory leak detector initialized
>[    0.592738] kmemleak: Automatic memory scanning thread started
>[    0.594580]   Magic number: 14:199:210
>[    0.598750] ALSA device list:
>[    0.598753]   No soundcards found.
>[    0.598783] Warning: unable to open an initial console.
>[    0.710429] ata5.00: ATAPI: MATSHITADVD-R   UJ-857E, ZB0E, max UDMA/66
>[    0.715485] ata5.00: configured for UDMA/66
>[    0.838696] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[    0.841195] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[    0.882088] usb 1-1: new high-speed USB device number 2 using ehci-pci
>[    1.025146] usb 1-1: New USB device found, idVendor=04e8, idProduct=61f5
>[    1.025156] usb 1-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1
>[    1.025163] usb 1-1: Product: Portable SSD T5
>[    1.025169] usb 1-1: Manufacturer: Samsung
>[    1.025174] usb 1-1: SerialNumber: 1234567A9430
>[    1.026411] usb-storage 1-1:1.0: USB Mass Storage device detected
>[    1.027080] scsi host6: usb-storage 1-1:1.0
>[    1.254926] ata3.00: ATA-8: TOSHIBA MK1655GSXF, FH315B, max UDMA/100
>[    1.254935] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
>[    1.257804] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[    1.258059] ata3.00: configured for UDMA/100
>[    1.259627] scsi 2:0:0:0: Direct-Access     ATA      TOSHIBA MK1655GS 5B   PQ: 0 ANSI: 5
>[    1.261615] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
>[    1.261725] sd 2:0:0:0: [sda] Write Protect is off
>[    1.261733] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[    1.261865] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    1.264815] scsi 4:0:0:0: CD-ROM            MATSHITA DVD-R   UJ-857E  ZB0E PQ: 0 ANSI: 5
>[    1.330052] usb 2-2: new full-speed USB device number 2 using uhci_hcd
>[    1.355300]  sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 sda15 sda16 sda17 sda18 sda19 sda20 sda21 sda22 sda23 sda24 sda25 sda26 sda27
>[    1.361979] sd 2:0:0:0: [sda] Attached SCSI disk
>[    1.362036] Waiting for root device PARTUUID=2BF078D5-C0AA-4D4C-A865-6FAED4AA72D7...
>[    1.440123] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1f26e4d23c8, max_idle_ns: 440795286042 ns
>[    1.522179] usb 2-2: New USB device found, idVendor=05ac, idProduct=021a
>[    1.522189] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    1.522196] usb 2-2: Product: Apple Internal Keyboard / Trackpad
>[    1.522202] usb 2-2: Manufacturer: Apple Computer
>[    2.082191] scsi 6:0:0:0: Direct-Access     Samsung  Portable SSD T5  0    PQ: 0 ANSI: 6
>[    2.085533] sd 6:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/233 GiB)
>[    2.086646] sd 6:0:0:0: [sdb] Write Protect is off
>[    2.086654] sd 6:0:0:0: [sdb] Mode Sense: 43 00 00 00
>[    2.087771] sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    2.100067] GPT:Primary header thinks Alt. header is not at the end of the disk.
>[    2.100083] GPT:13131874 != 488397167
>[    2.100085] GPT:Alternate GPT header not at the end of the disk.
>[    2.100087] GPT:13131874 != 488397167
>[    2.100089] GPT: Use GNU Parted to correct GPT errors.
>[    2.100136]  sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7 sdb8 sdb9 sdb10 sdb11 sdb12 sdb13 sdb14 sdb15 sdb16 sdb17 sdb18 sdb19 sdb20 sdb21 sdb22 sdb23 sdb24 sdb25 sdb26 sdb27
>[    2.111041] sd 6:0:0:0: [sdb] Attached SCSI disk
>[    2.111902] EXT4-fs (sdb18): couldn't mount as ext3 due to feature incompatibilities
>[    2.112646] EXT4-fs (sdb18): mounting ext2 file system using the ext4 subsystem
>[    2.117127] EXT4-fs (sdb18): mounted filesystem without journal. Opts: (null)
>[    2.117158] VFS: Mounted root (ext2 filesystem) readonly on device 259:14.
>[    2.123863] devtmpfs: mounted
>[    2.129341] Freeing unused kernel memory: 3936K
>[    2.129348] Write protecting the kernel read-only data: 16384k
>[    2.131081] Freeing unused kernel memory: 2020K
>[    2.136715] Freeing unused kernel memory: 1004K
>[    2.228042] usb 3-1: new full-speed USB device number 2 using uhci_hcd
>[    2.389162] usb 3-1: New USB device found, idVendor=067b, idProduct=2303
>[    2.389173] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    2.389179] usb 3-1: Product: USB-Serial Controller D
>[    2.389185] usb 3-1: Manufacturer: Prolific Technology Inc. 
>[    2.391349] pl2303 3-1:1.0: pl2303 converter detected
>[    2.403560] usb 3-1: pl2303 converter now attached to ttyUSB0
>[    2.409971] console [ttyUSB0] enabled
>[    2.712734] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
>[    2.713312] Unsafe core_pattern used with fs.suid_dumpable=2.
>               Pipe handler or fully qualified core dump path required.
>               Set kernel.core_pattern before fs.suid_dumpable.
>[    2.781367] udevd[103]: starting version 225
>[    2.922029] usb 1-4: new high-speed USB device number 5 using ehci-pci
>[    2.925121] random: crng init done
>[    3.051405] usb 1-4: New USB device found, idVendor=05ac, idProduct=8300
>[    3.051420] usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    3.105070] EXT4-fs (sdb16): recovery complete
>[    3.107043] EXT4-fs (sdb16): mounted filesystem with ordered data mode. Opts: commit=600
>[    3.135341] EXT4-fs (sdb23): recovery complete
>[    3.135350] EXT4-fs (sdb23): mounted filesystem with ordered data mode. Opts: (null)
>[    3.354048] usb 4-2: new full-speed USB device number 2 using uhci_hcd
>[    3.539107] usb 4-2: New USB device found, idVendor=05ac, idProduct=8240
>[    3.539117] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    3.539121] usb 4-2: Product: IR Receiver
>[    3.539124] usb 4-2: Manufacturer: Apple Computer, Inc.
>[    3.546348] hid-generic 0003:05AC:8240.0003: hiddev96,hidraw0: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:1d.2-2/input0
>[    3.557624] EXT4-fs (dm-0): recovery complete
>[    3.561340] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: discard,commit=600
>[    3.634478] EXT4-fs (sdb16): re-mounted. Opts: commit=600,data=ordered
>[    3.659624] init: ureadahead main process (240) terminated with status 5
>[    4.250070] usb 5-1: new full-speed USB device number 2 using uhci_hcd
>[    4.431206] usb 5-1: New USB device found, idVendor=05ac, idProduct=1000
>[    4.431220] usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    4.454400] input: HID 05ac:1000 as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/0003:05AC:1000.0004/input/input5
>[    4.508233] hid-generic 0003:05AC:1000.0004: input,hidraw1: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0000:00:1d.3-1/input0
>[    4.524911] input: HID 05ac:1000 as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.1/0003:05AC:1000.0005/input/input6
>[    4.525728] hid-generic 0003:05AC:1000.0005: input,hidraw2: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0000:00:1d.3-1/input1
>[    4.550135] usb 5-1: usbfs: USBDEVFS_CONTROL failed cmd hid2hci rqt 64 rq 0 len 0 ret -75
>[    4.550751] udevd[123]: Process 'hid2hci --method=csr --devpath=/devices/pci0000:00/0000:00:1d.3/usb5/5-1' failed with exit code 1.
>[    4.712191] usb 5-1: USB disconnect, device number 2
>[    5.073087] usb 5-1: new full-speed USB device number 3 using uhci_hcd
>[    5.274233] usb 5-1: New USB device found, idVendor=05ac, idProduct=8205
>[    5.274246] usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    5.364415] Bluetooth: Core ver 2.22
>[    5.364526] NET: Registered protocol family 31
>[    5.364530] Bluetooth: HCI device and connection manager initialized
>[    5.364542] Bluetooth: HCI socket layer initialized
>[    5.364552] Bluetooth: L2CAP socket layer initialized
>[    5.364597] Bluetooth: SCO socket layer initialized
>[    5.381361] usbcore: registered new interface driver btusb
>[    6.521428] frecon(277): 
>[    6.521439] No monitor available, running headless!
>
>[    6.521599] DEBUG: tsm_screen: 
>[    6.521607] new screen
>
>[    6.521642] DEBUG: tsm_vte: 
>[    6.521650] new vte object
>
>[    6.523811] frecon(277): 
>[    6.825718] ath9k 0000:02:00.0: enabling device (0000 -> 0002)
>[    6.847167] neverware_client_id: starting service
>[    6.855444] init: cgroups main process (287) terminated with status 1
>[    6.956242] ath: EEPROM regdomain: 0x64
>[    6.956245] ath: EEPROM indicates we should expect a direct regpair map
>[    6.956248] ath: Country alpha2 being used: 00
>[    6.956249] ath: Regpair used: 0x64
>[    6.970576] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
>[    6.976358] ieee80211 phy0: Atheros AR5418 MAC/BB Rev:2 AR5133 RF Rev:81 mem=0xffffc900003a0000, irq=17
>[    6.980742] udevd[402]: Process '/sbin/crda' failed with exit code 234.
>[    7.001479] udevd[404]: Process '/usr/sbin/iw dev wlan0 set power_save on' failed with exit code 161.
>[    7.009105] init: vpd-log main process (290) terminated with status 1
>[    8.429193] neverware_client_id: running from installer
>[    8.429259] neverware_client_id: reading client_id from /usr/share/oem/client_id
>[    8.431117] neverware_client_id: error reading client_id, [Errno 2] No such file or directory: '/usr/share/oem/client_id'
>[    8.431251] neverware_client_id: udevadm trigger --action=add --subsystem-nomatch=input --subsystem-nomatch=misc --subsystem-nomatch=graphics --subsystem-nomatch=drm --subsystem-nomatch=nvhost --subsystem-nomatch=tegra_dc_ext
>[    8.569436] neverware_client_id: udevadm settle
>[    8.627488] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
>[    8.632595] smbus_hc ACPI0001:00: SBS HC: offset = 0x20, query_bit = 0x10
>[    8.655124] ACPI: Smart Battery System [SBS0]: AC Adapter [AC0] (on-line)
>[    8.679310] leds_ss4200: no LED devices found
>[    8.716160] snd_hda_codec_idt hdaudioC0D0: autoconfig for STAC9221 A1: line_outs=2 (0xc/0xd/0x0/0x0/0x0) type:speaker
>[    8.716169] snd_hda_codec_idt hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>[    8.716173] snd_hda_codec_idt hdaudioC0D0:    hp_outs=1 (0xa/0x0/0x0/0x0/0x0)
>[    8.716177] snd_hda_codec_idt hdaudioC0D0:    mono: mono_out=0x0
>[    8.716180] snd_hda_codec_idt hdaudioC0D0:    dig-out=0x10/0x0
>[    8.716183] snd_hda_codec_idt hdaudioC0D0:    inputs:
>[    8.716187] snd_hda_codec_idt hdaudioC0D0:      Mic=0xb
>[    8.716190] snd_hda_codec_idt hdaudioC0D0:      Line=0xf
>[    8.716193] snd_hda_codec_idt hdaudioC0D0:    dig-in=0x11
>[    8.725875] udevd[467]: Process '/usr/sbin/iw dev wlan0 set power_save on' failed with exit code 161.
>[    8.744113] appletouch 2-2:1.1: Geyser mode initialized.
>[    8.744412] input: appletouch as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.1/input/input7
>[    8.744570] sr 4:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
>[    8.744576] cdrom: Uniform CD-ROM driver Revision: 3.20
>[    8.745560] sr 4:0:0:0: Attached scsi CD-ROM sr0
>[    8.746205] usbcore: registered new interface driver appletouch
>[    8.750896] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
>[    8.752289] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
>[    8.754512] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
>[    8.755415] input: HDA Intel SPDIF In as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
>[    8.758258] input: Apple Computer Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/0003:05AC:021A.0001/input/input12
>[    8.779676] input: PC Speaker as /devices/platform/pcspkr/input/input13
>[    8.786102] firewire_ohci 0000:03:03.0: added OHCI v1.0 device as card 0, 8 IR + 8 IT contexts, quirks 0x0
>[    8.811969] apple 0003:05AC:021A.0001: input,hidraw1: USB HID v1.11 Keyboard [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2/input0
>[    8.812566] input: Apple Computer Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.2/0003:05AC:021A.0002/input/input14
>[    8.812991] apple 0003:05AC:021A.0002: input,hidraw2: USB HID v1.11 Device [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2/input2
>[    9.087117] applesmc: key=226 fan=1 temp=10 index=10 acc=1 lux=0 kbd=0
>[    9.153441] input: applesmc as /devices/platform/applesmc.768/input/input15
>[    9.155111] applesmc applesmc.768: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
>[    9.288883] firewire_core 0000:03:03.0: created device fw0: GUID 001b63fffe6575c2, S400
>[    9.743113] neverware_client_id: writing client_id 00:17:f2:e0:12:cd to /run/neverware_client_id
>[    9.792454] ip6_tables: (C) 2000-2006 Netfilter Core Team
>[    9.851625] init: tcsd main process (643) terminated with status 137
>[    9.851673] init: tcsd main process ended, respawning
>[    9.902937] udevd[658]: Process '/sbin/crda' failed with exit code 234.
>[   11.187626] sky2 0000:01:00.0 eth0: enabling interface
>[   11.187757] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
>[   11.232353] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[   12.057274] udevd[881]: Process '/sbin/crda' failed with exit code 234.
>[   12.280913] udevd[883]: Process '/sbin/crda' failed with exit code 234.
>[   13.035309] udevd[885]: Process '/sbin/crda' failed with exit code 234.
>[   13.097594] udevd[887]: Process '/sbin/crda' failed with exit code 234.
>[   13.238328] udevd[889]: Process '/sbin/crda' failed with exit code 234.
>[   13.901641] sky2 0000:01:00.0 eth0: Link is up at 1000 Mbps, full duplex, flow control both
>[   13.901641] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>[   16.300363] udevd[894]: Process '/sbin/crda' failed with exit code 234.
>[   19.498368] udevd[896]: Process '/sbin/crda' failed with exit code 234.
>[   22.701022] udevd[898]: Process '/sbin/crda' failed with exit code 234.
>[   24.412817] udevd[900]: Process '/sbin/crda' failed with exit code 234.
>[   24.672798] udevd[902]: Process '/sbin/crda' failed with exit code 234.
>[   25.414696] udevd[904]: Process '/sbin/crda' failed with exit code 234.
>[   25.630148] udevd[906]: Process '/sbin/crda' failed with exit code 234.
>[   25.899590] udevd[908]: Process '/sbin/crda' failed with exit code 234.
>[   29.100193] udevd[910]: Process '/sbin/crda' failed with exit code 234.
>[   32.298569] udevd[912]: Process '/sbin/crda' failed with exit code 234.
>[   35.498429] udevd[914]: Process '/sbin/crda' failed with exit code 234.
>[   36.805803] udevd[916]: Process '/sbin/crda' failed with exit code 234.
>[   37.030798] udevd[918]: Process '/sbin/crda' failed with exit code 234.
>[   37.144902] udevd[920]: Process '/sbin/crda' failed with exit code 234.
>[   37.718164] udevd[922]: Process '/sbin/crda' failed with exit code 234.
>[   38.000116] udevd[924]: Process '/sbin/crda' failed with exit code 234.
>[   38.699949] udevd[926]: Process '/sbin/crda' failed with exit code 234.
>[   40.024267] leds_ss4200: no LED devices found
>[   40.041241] udevd[947]: Process '/usr/sbin/iw dev wlan0 set power_save on' failed with exit code 161.
>[   81.079779] EXT4-fs (sdb18): warning: mounting unchecked fs, running e2fsck is recommended
>[   81.085655] EXT4-fs (sdb18): re-mounted. Opts: block_validity,barrier,user_xattr,acl
>[   94.846402] [drm:i915_driver_load [i915]] No PCH found.
>[   94.846461] [drm:intel_power_domains_init [i915]] Allowed DC state mask 00
>[   94.847673] [drm:intel_device_info_dump [i915]] i915 device info: platform=I945GM gen=3 pciid=0x27a2 rev=0x03
>[   94.847725] [drm:intel_device_info_dump [i915]] i915 device info: is_mobile: yes
>[   94.847776] [drm:intel_device_info_dump [i915]] i915 device info: is_lp: no
>[   94.847829] [drm:intel_device_info_dump [i915]] i915 device info: is_alpha_support: no
>[   94.847881] [drm:intel_device_info_dump [i915]] i915 device info: has_64bit_reloc: no
>[   94.847932] [drm:intel_device_info_dump [i915]] i915 device info: has_aliasing_ppgtt: no
>[   94.847985] [drm:intel_device_info_dump [i915]] i915 device info: has_csr: no
>[   94.848014] [drm:intel_device_info_dump [i915]] i915 device info: has_ddi: no
>[   94.848102] [drm:intel_device_info_dump [i915]] i915 device info: has_dp_mst: no
>[   94.848153] [drm:intel_device_info_dump [i915]] i915 device info: has_reset_engine: no
>[   94.848204] [drm:intel_device_info_dump [i915]] i915 device info: has_fbc: yes
>[   94.848255] [drm:intel_device_info_dump [i915]] i915 device info: has_fpga_dbg: no
>[   94.848306] [drm:intel_device_info_dump [i915]] i915 device info: has_full_ppgtt: no
>[   94.848356] [drm:intel_device_info_dump [i915]] i915 device info: has_full_48bit_ppgtt: no
>[   94.848407] [drm:intel_device_info_dump [i915]] i915 device info: has_gmbus_irq: no
>[   94.848458] [drm:intel_device_info_dump [i915]] i915 device info: has_gmch_display: yes
>[   94.848527] [drm:intel_device_info_dump [i915]] i915 device info: has_guc: no
>[   94.848578] [drm:intel_device_info_dump [i915]] i915 device info: has_guc_ct: no
>[   94.848629] [drm:intel_device_info_dump [i915]] i915 device info: has_hotplug: yes
>[   94.848680] [drm:intel_device_info_dump [i915]] i915 device info: has_l3_dpf: no
>[   94.848730] [drm:intel_device_info_dump [i915]] i915 device info: has_llc: no
>[   94.848781] [drm:intel_device_info_dump [i915]] i915 device info: has_logical_ring_contexts: no
>[   94.848832] [drm:intel_device_info_dump [i915]] i915 device info: has_overlay: yes
>[   94.848884] [drm:intel_device_info_dump [i915]] i915 device info: has_pipe_cxsr: no
>[   94.848935] [drm:intel_device_info_dump [i915]] i915 device info: has_pooled_eu: no
>[   94.848986] [drm:intel_device_info_dump [i915]] i915 device info: has_psr: no
>[   94.849037] [drm:intel_device_info_dump [i915]] i915 device info: has_rc6: no
>[   94.849107] [drm:intel_device_info_dump [i915]] i915 device info: has_rc6p: no
>[   94.849158] [drm:intel_device_info_dump [i915]] i915 device info: has_resource_streamer: no
>[   94.849209] [drm:intel_device_info_dump [i915]] i915 device info: has_runtime_pm: no
>[   94.849260] [drm:intel_device_info_dump [i915]] i915 device info: has_snoop: no
>[   94.849311] [drm:intel_device_info_dump [i915]] i915 device info: unfenced_needs_alignment: yes
>[   94.849362] [drm:intel_device_info_dump [i915]] i915 device info: cursor_needs_physical: yes
>[   94.849414] [drm:intel_device_info_dump [i915]] i915 device info: hws_needs_physical: yes
>[   94.849465] [drm:intel_device_info_dump [i915]] i915 device info: overlay_needs_physical: yes
>[   94.849516] [drm:i915_driver_load [i915]] i915 device info: supports_tv: yes
>[   94.851161] [drm:intel_device_info_runtime_init [i915]] slice mask: 0000
>[   94.851293] [drm:intel_device_info_runtime_init [i915]] slice total: 0
>[   94.851344] [drm:intel_device_info_runtime_init [i915]] subslice total: 0
>[   94.851396] [drm:intel_device_info_runtime_init [i915]] subslice mask 0000
>[   94.851447] [drm:intel_device_info_runtime_init [i915]] subslice per slice: 0
>[   94.851499] [drm:intel_device_info_runtime_init [i915]] EU total: 0
>[   94.851551] [drm:intel_device_info_runtime_init [i915]] EU per subslice: 0
>[   94.851602] [drm:intel_device_info_runtime_init [i915]] has slice power gating: n
>[   94.851654] [drm:intel_device_info_runtime_init [i915]] has subslice power gating: n
>[   94.851703] [drm:i915_driver_load [i915]] has EU power gating: n
>[   94.851753] [drm:i915_driver_load [i915]] ppgtt mode: 0
>[   94.851803] [drm:i915_driver_load [i915]] use GPU semaphores? no
>[   94.851810] pci 0000:00:00.0: Intel 945GM Chipset
>[   94.851908] pci 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
>[   94.852906] pci 0000:00:00.0: detected 16384K stolen memory
>[   94.854867] [drm] Memory usable by graphics device = 256M
>[   94.855005] [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M
>[   94.855081] [drm:i915_ggtt_probe_hw [i915]] GTT stolen size = 16M
>[   94.855102] checking generic (80000000 640000) vs hw (80000000 10000000)
>[   94.855104] fb: switching to inteldrmfb from EFI VGA
>[   94.856262] [drm:i915_gem_init_stolen [i915]] GTT within stolen memory at 0x7ffc0000-0x7fffffff
>[   94.856320] [drm:i915_gem_init_stolen [i915]] Stolen memory adjusted to 0x000000007f000000 - 0x000000007ffbffff
>[   94.856396] [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 16128K, usable: 16128K
>[   94.856496] [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x0
>[   94.856556] [drm:intel_opregion_setup [i915]] ACPI OpRegion not supported!
>[   94.856627] [drm:intel_gvt_init [i915]] GVT-g is disabled by kernel params
>[   94.856636] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
>[   94.856641] [drm] Driver supports precise vblank timestamp query.
>[   94.856704] [drm:intel_bios_init [i915]] Set default to SSC at 100000 kHz
>[   94.856785] resource sanity check: requesting [mem 0x000c0000-0x000dffff], which spans more than PCI Bus 0000:00 [mem 0x000c0000-0x000c3fff window]
>[   94.856794] caller pci_map_rom+0x79/0xbf mapping multiple BARs
>[   94.856806] i915 0000:00:02.0: Invalid PCI ROM header signature: expecting 0xaa55, got 0xffff
>[   94.856808] [drm] Failed to find VBIOS tables (VBT)
>[   94.856957] [drm:intel_dsm_detect [i915]] no _DSM method for intel device
>[   94.857021] [drm:intel_power_well_enable [i915]] enabling always-on
>[   94.859274] [drm] applying backlight present quirk
>[   94.859367] [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 0
>[   94.859429] [drm:intel_modeset_init [i915]] 2 display pipes available.
>[   94.859688] [drm:intel_update_cdclk [i915]] Current CD clock rate: 200000 kHz, VCO: 0 kHz, ref: 0 kHz
>[   94.859747] [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 200000 kHz
>[   94.859806] [drm:intel_modeset_init [i915]] Max dotclock rate: 360000 kHz
>[   94.859813] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
>[   94.860716] [drm:intel_lvds_init [i915]] LVDS PPS:t1+t2 110 t3 110 t4 3000 t5 2000 tx 2000 divider 16649 port 0 powerdown_on_reset 0
>[   94.872233] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus panel] timed out after NAK
>[   94.872365] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1)
>[   94.910394] [drm:intel_lvds_init [i915]] using preferred mode from EDID: 
>[   94.910408] [drm:drm_mode_debug_printmodeline] Modeline 40:"1280x800" 60 71000 1280 1328 1360 1440 800 803 809 823 0x48 0xa
>[   94.910507] [drm:intel_panel_setup_backlight [i915]] Connector LVDS-1 backlight initialized, enabled, brightness 148/148
>[   94.910580] [drm:intel_lvds_init [i915]] detected single-link lvds configuration
>[   94.910698] [drm:intel_modeset_init [i915]] probing SDVOB
>[   94.910778] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
>[   94.969809] [drm:intel_sdvo_debug_write [i915]] SDVOB: W: 02                         (SDVO_CMD_GET_DEVICE_CAPS)
>[   94.979680] [drm:intel_sdvo_read_response [i915]] SDVOB: R: (Success) 04 AA 03 01 01 01 01 00
>[   94.979742] [drm:intel_sdvo_init [i915]] SDVO capabilities:
>                 vendor_id: 4
>                 device_id: 170
>                 device_rev_id: 3
>                 sdvo_version_major: 1
>                 sdvo_version_minor: 1
>                 sdvo_inputs_mask: 1
>                 smooth_scaling: 0
>                 sharp_scaling: 0
>                 up_scaling: 0
>                 down_scaling: 0
>                 stall_support: 0
>                 output_flags: 1
>[   94.979802] [drm:intel_sdvo_dvi_init [i915]] initialising DVI device 0
>[   94.979903] [drm:intel_sdvo_debug_write [i915]] SDVOB: W: 10 00                      (SDVO_CMD_SET_TARGET_INPUT)
>[   94.983128] [drm:intel_sdvo_read_response [i915]] SDVOB: R: (Success)
>[   94.983202] [drm:intel_sdvo_debug_write [i915]] SDVOB: W: 1D                         (SDVO_CMD_GET_INPUT_PIXEL_CLOCK_RANGE)
>[   94.989398] [drm:intel_sdvo_read_response [i915]] SDVOB: R: (Success) C4 09 74 40
>[   94.989459] [drm:intel_sdvo_init [i915]] SDVOB device VID/DID: 04:AA.03, clock range 25MHz - 165MHz, input 1: Y, input 2: N, output 1: Y, output 2: N
>[   94.989519] [drm:intel_modeset_init [i915]] probing SDVOC
>[   94.989586] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 2
>[   94.990436] [drm:intel_sdvo_read_byte [i915]] i2c transfer returned -6
>[   94.990495] [drm:intel_sdvo_init [i915]] No SDVO device found on SDVOC
>[   94.990655] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 1
>[   94.991011] [drm:intel_modeset_setup_hw_state [i915]] pipe A active planes 0x1
>[   94.991136] [drm:intel_modeset_setup_hw_state [i915]] pipe A active planes 0x1
>[   94.991198] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:31:pipe A] hw state readout: disabled
>[   94.991267] [drm:intel_modeset_setup_hw_state [i915]] pipe B active planes 0x0
>[   94.991328] [drm:intel_modeset_setup_hw_state [i915]] pipe B active planes 0x0
>[   94.991389] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:36:pipe B] hw state readout: enabled
>[   94.991452] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:38:LVDS] hw state readout: enabled, pipe B
>[   94.991514] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:44:CRT] hw state readout: disabled, pipe A
>[   94.991591] [drm:intel_sdvo_debug_write [i915]] SDVOB: W: 04                         (SDVO_CMD_GET_ACTIVE_OUTPUTS)
>[   94.996300] [drm:intel_sdvo_read_response [i915]] SDVOB: R: (Success) 00 00
>[   94.996362] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:45:SDVO B] hw state readout: disabled, pipe A
>[   94.996422] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:48:TV] hw state readout: disabled, pipe A
>[   94.996484] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:37:LVDS-1] hw state readout: enabled
>[   94.996546] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:43:VGA-1] hw state readout: disabled
>[   94.996623] [drm:intel_sdvo_debug_write [i915]] SDVOB: W: 04                         (SDVO_CMD_GET_ACTIVE_OUTPUTS)

Actions: View

Attachments on bug 106160: 138963 | 138990

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.