Attachment 19854 Details for Bug 18210 – dmesg on this machine

dmesg on this machine

dmesg.txt (text/plain), 30.33 KB, created by Matt on 2008-10-24 12:27:32 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Matt

Created: 2008-10-24 12:27:32 UTC

Size: 30.33 KB

patch

obsolete

>Linux version 2.6.27-gentoo (root@mail.mattsteven.com) (gcc version 3.4.6 (Gentoo Hardened 3.4.6-r2 p1.5, ssp-3.4.6-1.0, pie-8.7.10)) #2 SMP Fri Oct 24 08:53:45 CDT 2008
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000008f000 (usable)
> BIOS-e820: 000000000008f000 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003f533000 (usable)
> BIOS-e820: 000000003f533000 - 000000003f53b000 (reserved)
> BIOS-e820: 000000003f53b000 - 000000003f5cb000 (usable)
> BIOS-e820: 000000003f5cb000 - 000000003f5cf000 (reserved)
> BIOS-e820: 000000003f5cf000 - 000000003f660000 (usable)
> BIOS-e820: 000000003f660000 - 000000003f6f0000 (ACPI NVS)
> BIOS-e820: 000000003f6f0000 - 000000003f6f2000 (usable)
> BIOS-e820: 000000003f6f2000 - 000000003f6ff000 (ACPI data)
> BIOS-e820: 000000003f6ff000 - 000000003f700000 (usable)
> BIOS-e820: 000000003f700000 - 0000000040000000 (reserved)
> BIOS-e820: 00000000f0000000 - 0000000100000000 (reserved)
>last_pfn = 0x3f700 max_arch_pfn = 0x100000
>kernel direct mapping tables up to 38000000 @ 7000-c000
>RAMDISK: 37de3000 - 37fefc19
>DMI 2.4 present.
>ACPI: RSDP 000FE020, 0014 (r0 INTEL )
>ACPI: RSDT 3F6FD038, 003C (r1 INTEL  D945GLF2       63       1000013)
>ACPI: FACP 3F6FC000, 0074 (r1 INTEL  D945GLF2       63 MSFT  1000013)
>ACPI: DSDT 3F6F7000, 4787 (r1 INTEL  D945GLF2       63 MSFT  1000013)
>ACPI: FACS 3F6A3000, 0040
>ACPI: APIC 3F6F6000, 0078 (r1 INTEL  D945GLF2       63 MSFT  1000013)
>ACPI: WDDT 3F6F5000, 0040 (r1 INTEL  D945GLF2       63 MSFT  1000013)
>ACPI: MCFG 3F6F4000, 003C (r1 INTEL  D945GLF2       63 MSFT  1000013)
>ACPI: ASF! 3F6F3000, 00A6 (r32 INTEL  D945GLF2       63 MSFT  1000013)
>ACPI: HPET 3F6F2000, 0038 (r1 INTEL  D945GLF2       63 MSFT  1000013)
>119MB HIGHMEM available.
>896MB LOWMEM available.
>  mapped low ram: 0 - 38000000
>  low ram: 00000000 - 38000000
>  bootmap 00008000 - 0000f000
>(9 early reservations) ==> bootmem [0000000000 - 0038000000]
>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
>  #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
>  #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
>  #3 [0000100000 - 0000557b54]    TEXT DATA BSS ==> [0000100000 - 0000557b54]
>  #4 [0037de3000 - 0037fefc19]          RAMDISK ==> [0037de3000 - 0037fefc19]
>  #5 [0000558000 - 000055b000]    INIT_PG_TABLE ==> [0000558000 - 000055b000]
>  #6 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
>  #7 [0000007000 - 0000008000]          PGTABLE ==> [0000007000 - 0000008000]
>  #8 [0000008000 - 000000f000]          BOOTMAP ==> [0000008000 - 000000f000]
>Zone PFN ranges:
>  DMA      0x00000000 -> 0x00001000
>  Normal   0x00001000 -> 0x00038000
>  HighMem  0x00038000 -> 0x0003f700
>Movable zone start PFN for each node
>early_node_map[6] active PFN ranges
>    0: 0x00000000 -> 0x0000008f
>    0: 0x00000100 -> 0x0003f533
>    0: 0x0003f53b -> 0x0003f5cb
>    0: 0x0003f5cf -> 0x0003f660
>    0: 0x0003f6f0 -> 0x0003f6f2
>    0: 0x0003f6ff -> 0x0003f700
>On node 0 totalpages: 259558
>free_area_init_node: node 0, pgdat c04bd700, node_mem_map c1000000
>  DMA zone: 3951 pages, LIFO batch:0
>  Normal zone: 223520 pages, LIFO batch:31
>  HighMem zone: 30057 pages, LIFO batch:7
>ACPI: PM-Timer IO Port: 0x408
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
>ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>SMP: Allowing 4 CPUs, 2 hotplug CPUs
>mapped APIC to ffffb000 (fee00000)
>mapped IOAPIC to ffffa000 (fec00000)
>Allocating PCI resources starting at 50000000 (gap: 40000000:b0000000)
>PERCPU: Allocating 37532 bytes of per cpu data
>NR_CPUS: 6, nr_cpu_ids: 4, nr_node_ids 1
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 257528
>Kernel command line: root=/dev/ram0 lvm2root=/dev/disks/root ro panic=10 ramdisk_size=6000
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>TSC: PIT calibration confirmed by PMTIMER.
>TSC: using PMTIMER calibration value
>Detected 1596.077 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 1022180k/1039360k available (2802k kernel code, 15688k reserved, 1092k data, 228k init, 121180k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xfff6b000 - 0xfffff000   ( 592 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc04d4000 - 0xc050d000   ( 228 kB)
>      .data : 0xc03bc9e5 - 0xc04cdc74   (1092 kB)
>      .text : 0xc0100000 - 0xc03bc9e5   (2802 kB)
>Checking if this processor honours the WP bit even in supervisor mode...Ok.
>CPA: page pool initialized 1 of 1 pages preallocated
>hpet clockevent registered
>Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.15 BogoMIPS (lpj=6384308)
>Mount-cache hash table entries: 512
>CPU: L1 I cache: 32K, L1 D cache: 24K
>CPU: L2 cache: 512K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>using mwait in idle threads.
>Checking 'hlt' instruction... OK.
>ACPI: Core revision 20080609
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>CPU0: Intel(R) Atom(TM) CPU  330   @ 1.60GHz stepping 02
>Booting processor 1/1 ip 6000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 3192.18 BogoMIPS (lpj=6384373)
>CPU: L1 I cache: 32K, L1 D cache: 24K
>CPU: L2 cache: 512K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel(R) Atom(TM) CPU  330   @ 1.60GHz stepping 02
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Brought up 2 CPUs
>Total of 2 processors activated (6384.34 BogoMIPS).
>CPU0 attaching sched-domain:
> domain 0: span 0-1 level CPU
>  groups: 0 1
>CPU1 attaching sched-domain:
> domain 0: span 0-1 level CPU
>  groups: 1 0
>net_namespace: 596 bytes
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: Found Intel Corporation 945G/GZ/P/PL Express Memory Controller Hub without MMCONFIG support.
>PCI: Using configuration type 1 for base access
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: 0000:00:02.0 reg 10 32bit mmio: [48200000, 4827ffff]
>PCI: 0000:00:02.0 reg 14 io port: [20e0, 20e7]
>PCI: 0000:00:02.0 reg 18 32bit mmio: [40000000, 47ffffff]
>PCI: 0000:00:02.0 reg 1c 32bit mmio: [48280000, 4829ffff]
>PCI: 0000:00:1b.0 reg 10 64bit mmio: [482a0000, 482a3fff]
>pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1b.0: PME# disabled
>pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.0: PME# disabled
>pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.2: PME# disabled
>pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.3: PME# disabled
>PCI: 0000:00:1d.0 reg 20 io port: [2080, 209f]
>PCI: 0000:00:1d.1 reg 20 io port: [2060, 207f]
>PCI: 0000:00:1d.2 reg 20 io port: [2040, 205f]
>PCI: 0000:00:1d.3 reg 20 io port: [2020, 203f]
>PCI: 0000:00:1d.7 reg 10 32bit mmio: [482a4000, 482a43ff]
>pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1d.7: PME# disabled
>pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
>pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
>PCI: 0000:00:1f.1 reg 10 io port: [20d8, 20df]
>PCI: 0000:00:1f.1 reg 14 io port: [20f4, 20f7]
>PCI: 0000:00:1f.1 reg 18 io port: [20d0, 20d7]
>PCI: 0000:00:1f.1 reg 1c io port: [20f0, 20f3]
>PCI: 0000:00:1f.1 reg 20 io port: [20b0, 20bf]
>PCI: 0000:00:1f.2 reg 10 io port: [20c8, 20cf]
>PCI: 0000:00:1f.2 reg 14 io port: [20ec, 20ef]
>PCI: 0000:00:1f.2 reg 18 io port: [20c0, 20c7]
>PCI: 0000:00:1f.2 reg 1c io port: [20e8, 20eb]
>PCI: 0000:00:1f.2 reg 20 io port: [20a0, 20af]
>pci 0000:00:1f.2: PME# supported from D3hot
>pci 0000:00:1f.2: PME# disabled
>PCI: 0000:00:1f.3 reg 20 io port: [2000, 201f]
>PCI: 0000:01:00.0 reg 10 io port: [1000, 10ff]
>PCI: 0000:01:00.0 reg 18 64bit mmio: [48100000, 48100fff]
>PCI: 0000:01:00.0 reg 20 32bit mmio: [48000000, 4800ffff]
>PCI: 0000:01:00.0 reg 30 32bit mmio: [fffe0000, ffffffff]
>pci 0000:01:00.0: supports D1
>pci 0000:01:00.0: supports D2
>pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:01:00.0: PME# disabled
>PCI: bridge 0000:00:1c.0 io port: [1000, 1fff]
>PCI: bridge 0000:00:1c.0 32bit mmio: [48100000, 481fffff]
>PCI: bridge 0000:00:1c.0 64bit mmio pref: [48000000, 480fffff]
>pci 0000:00:1e.0: transparent bridge
>bus 00 -> node 0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *9 10 11 12)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 *9 10 11 12)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 *10 11 12)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 10 devices
>ACPI: ACPI bus type pnp unregistered
>SCSI subsystem initialized
>libata version 3.00 loaded.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>system 00:01: iomem range 0xf0000000-0xf3ffffff could not be reserved
>system 00:01: iomem range 0xfed13000-0xfed13fff could not be reserved
>system 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
>system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
>system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
>system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved
>system 00:01: iomem range 0xfed20000-0xfed3ffff could not be reserved
>system 00:01: iomem range 0xfed45000-0xfed99fff could not be reserved
>system 00:01: iomem range 0xc0000-0xdffff could not be reserved
>system 00:01: iomem range 0xe0000-0xfffff could not be reserved
>system 00:06: ioport range 0x500-0x53f has been reserved
>system 00:06: ioport range 0x400-0x47f has been reserved
>system 00:06: ioport range 0x680-0x6ff has been reserved
>pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
>pci 0000:00:1c.0:   IO window: 0x1000-0x1fff
>pci 0000:00:1c.0:   MEM window: 0x48100000-0x481fffff
>pci 0000:00:1c.0:   PREFETCH window: 0x00000048000000-0x000000480fffff
>pci 0000:00:1c.2: PCI bridge, secondary bus 0000:02
>pci 0000:00:1c.2:   IO window: disabled
>pci 0000:00:1c.2:   MEM window: disabled
>pci 0000:00:1c.2:   PREFETCH window: disabled
>pci 0000:00:1c.3: PCI bridge, secondary bus 0000:03
>pci 0000:00:1c.3:   IO window: disabled
>pci 0000:00:1c.3:   MEM window: disabled
>pci 0000:00:1c.3:   PREFETCH window: disabled
>pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04
>pci 0000:00:1e.0:   IO window: disabled
>pci 0000:00:1e.0:   MEM window: disabled
>pci 0000:00:1e.0:   PREFETCH window: disabled
>pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>pci 0000:00:1c.0: setting latency timer to 64
>pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>pci 0000:00:1c.2: setting latency timer to 64
>pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
>pci 0000:00:1c.3: setting latency timer to 64
>pci 0000:00:1e.0: setting latency timer to 64
>bus: 00 index 0 io port: [0, ffff]
>bus: 00 index 1 mmio: [0, ffffffff]
>bus: 01 index 0 io port: [1000, 1fff]
>bus: 01 index 1 mmio: [48100000, 481fffff]
>bus: 01 index 2 mmio: [48000000, 480fffff]
>bus: 01 index 3 mmio: [0, 0]
>bus: 02 index 0 mmio: [0, 0]
>bus: 02 index 1 mmio: [0, 0]
>bus: 02 index 2 mmio: [0, 0]
>bus: 02 index 3 mmio: [0, 0]
>bus: 03 index 0 mmio: [0, 0]
>bus: 03 index 1 mmio: [0, 0]
>bus: 03 index 2 mmio: [0, 0]
>bus: 03 index 3 mmio: [0, 0]
>bus: 04 index 0 mmio: [0, 0]
>bus: 04 index 1 mmio: [0, 0]
>bus: 04 index 2 mmio: [0, 0]
>bus: 04 index 3 io port: [0, ffff]
>bus: 04 index 4 mmio: [0, ffffffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
>Freeing initrd memory: 2099k freed
>Machine check exception polling timer started.
>audit: initializing netlink socket (disabled)
>type=2000 audit(1224904102.404:1): initialized
>highmem bounce pool size: 64 pages
>Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>SGI XFS with security attributes, realtime, no debug enabled
>SGI XFS Quota Management subsystem
>msgmni has been set to 1764
>io scheduler noop registered
>io scheduler anticipatory registered (default)
>io scheduler deadline registered
>io scheduler cfq registered
>pci 0000:00:02.0: Boot video device
>intel_rng: Firmware space is locked read-only. If you can't or
>intel_rng: don't want to disable this in firmware setup, and if
>intel_rng: you are certain that your system has a functional
>intel_rng: RNG, try using the 'no_fwh_detect' option.
>Serial: 8250/16550 driver4 ports, IRQ sharing disabled
>brd: module loaded
>loop: module loaded
>usbcore: registered new interface driver asix
>usbcore: registered new interface driver cdc_ether
>usbcore: registered new interface driver net1080
>usbcore: registered new interface driver zaurus
>Driver 'sd' needs updating - please use bus_type methods
>Driver 'sr' needs updating - please use bus_type methods
>ata_piix 0000:00:1f.1: version 2.12
>ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>ata_piix 0000:00:1f.1: setting latency timer to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x20b0 irq 14
>ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x20b8 irq 15
>Switched to high resolution mode on CPU 1
>Switched to high resolution mode on CPU 0
>ata1.00: ATAPI: _NEC DVD_RW ND-1300A, 1.0A, max UDMA/33
>ata1.00: configured for UDMA/33
>ata2: port disabled. ignoring.
>scsi 0:0:0:0: CD-ROM            _NEC     DVD_RW ND-1300A  1.0A PQ: 0 ANSI: 5
>sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 0:0:0:0: Attached scsi CD-ROM sr0
>sr 0:0:0:0: Attached scsi generic sg0 type 5
>ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
>ata_piix 0000:00:1f.2: setting latency timer to 64
>scsi2 : ata_piix
>scsi3 : ata_piix
>ata3: SATA max UDMA/133 cmd 0x20c8 ctl 0x20ec bmdma 0x20a0 irq 19
>ata4: SATA max UDMA/133 cmd 0x20c0 ctl 0x20e8 bmdma 0x20a8 irq 19
>ata3.00: ATA-7: WDC WD5000AAKS-00TMA0, 12.01C01, max UDMA/133
>ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata3.00: configured for UDMA/133
>ata4.00: ATA-7: WDC WD5000AAKS-00TMA0, 12.01C01, max UDMA/133
>ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata4.00: configured for UDMA/133
>scsi 2:0:0:0: Direct-Access     ATA      WDC WD5000AAKS-0 12.0 PQ: 0 ANSI: 5
>sd 2:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
>sd 2:0:0:0: [sda] Write Protect is off
>sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 2:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
>sd 2:0:0:0: [sda] Write Protect is off
>sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2
>sd 2:0:0:0: [sda] Attached SCSI disk
>sd 2:0:0:0: Attached scsi generic sg1 type 0
>scsi 3:0:0:0: Direct-Access     ATA      WDC WD5000AAKS-0 12.0 PQ: 0 ANSI: 5
>sd 3:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
>sd 3:0:0:0: [sdb] Write Protect is off
>sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 3:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
>sd 3:0:0:0: [sdb] Write Protect is off
>sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1 sdb2
>sd 3:0:0:0: [sdb] Attached SCSI disk
>sd 3:0:0:0: Attached scsi generic sg2 type 0
>USB Universal Host Controller Interface driver v3.0
>uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>uhci_hcd 0000:00:1d.0: setting latency timer to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 23, io base 0x00002080
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>uhci_hcd 0000:00:1d.1: setting latency timer to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.1: irq 19, io base 0x00002060
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>usb 1-1: new low speed USB device using uhci_hcd and address 2
>uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>uhci_hcd 0000:00:1d.2: setting latency timer to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x00002040
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>usb 1-1: configuration #1 chosen from 1 choice
>usb 2-1: new full speed USB device using uhci_hcd and address 2
>uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
>uhci_hcd 0000:00:1d.3: setting latency timer to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.3: irq 16, io base 0x00002020
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>usb 2-1: configuration #1 chosen from 1 choice
>usb 2-2: new full speed USB device using uhci_hcd and address 3
>usb 2-2: configuration #1 chosen from 1 choice
>usb 3-2: new full speed USB device using uhci_hcd and address 2
>usb 3-2: configuration #1 chosen from 1 choice
>usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0162
>usbcore: registered new interface driver usblp
>Initializing USB Mass Storage driver...
>scsi4 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 2
>usb-storage: waiting for device to settle before scanning
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
>PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
>serio: i8042 KBD port at 0x60,0x64 irq 1
>mice: PS/2 mouse device common for all mice
>I2O subsystem v1.325
>i2o: max drivers = 8
>I2O Configuration OSM v1.323
>I2O Block Device OSM v1.325
>I2O SCSI Peripheral OSM v1.316
>I2O ProcFS OSM v1.316
>i2c /dev entries driver
>device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>device-mapper: multipath round-robin: version 1.0.0 loaded
>cpuidle: using governor ladder
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>usbhid: v2.6:USB HID core driver
>TCP cubic registered
>NET: Registered protocol family 17
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>Starting balanced_irq
>Using IPI No-Shortcut mode
>input: AT Translated Set 2 keyboard as /class/input/input0
>RAMDISK: Compressed image found at block 0
>VFS: Mounted root (ext2 filesystem) readonly.
>Freeing unused kernel memory: 228k freed
>Write protecting the kernel text: 2804k
>Write protecting the kernel read-only data: 884k
>UDF-fs: No VRS found
>Filesystem "dm-0": Disabling barriers, trial barrier write failed
>XFS mounting filesystem dm-0
>Ending clean XFS mount for filesystem: dm-0
>Linux agpgart interface v0.103
>agpgart-intel 0000:00:00.0: Intel 945G Chipset
>agpgart-intel 0000:00:00.0: detected 8060K stolen memory
>processor ACPI0007:00: registered as cooling_device0
>processor ACPI0007:01: registered as cooling_device1
>agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0x40000000
>input: Power Button (FF) as /class/input/input1
>ACPI: Power Button (FF) [PWRF]
>input: Sleep Button (CM) as /class/input/input2
>ACPI: Sleep Button (CM) [SLPB]
>r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
>r8169 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>r8169 0000:01:00.0: setting latency timer to 64
>r8169 0000:01:00.0: no MSI. Back to INTx.
>eth0: RTL8168c/8111c at 0xf8876000, 00:1c:c0:70:6d:4a, XID 3c4000c0 IRQ 16
>input: X10 Wireless Technology Inc USB Receiver as /class/input/input3
>ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>ehci_hcd 0000:00:1d.7: setting latency timer to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
>ehci_hcd 0000:00:1d.7: debug port 1
>ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
>ehci_hcd 0000:00:1d.7: irq 23, io mem 0x482a4000
>NET: Registered protocol family 8
>NET: Registered protocol family 20
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 8 ports detected
>usb 1-1: USB disconnect, address 2
>ati_remote 1-1:1.0: ati_remote_open: usb_submit_urb failed!
>input: failed to attach handler kbd to device input3, error: -5
>HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>HDA Intel 0000:00:1b.0: setting latency timer to 64
>hda_codec: Unknown model for ALC662, trying auto-probe from BIOS...
>[ueagle-atm] driver ueagle 1.4 loaded
>i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>ACPI: I/O resource 0000:00:1f.3 [0x2000-0x201f] conflicts with ACPI region SMB1 [0x2000-0x2016]
>ACPI: Device needs an ACPI driver
>usb 2-1: USB disconnect, address 2
>usblp0: removed
>Linux video capture interface: v2.00
>em28xx v4l2 driver version 0.1.0 loaded
>usb 2-2: USB disconnect, address 3
>usb 3-2: USB disconnect, address 2
>usb 5-2: new high speed USB device using ehci_hcd and address 3
>usb 5-2: configuration #1 chosen from 1 choice
>scsi5 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 3
>usb-storage: waiting for device to settle before scanning
>usb 5-6: new high speed USB device using ehci_hcd and address 6
>usb 5-6: configuration #1 chosen from 1 choice
>usbcore: registered new interface driver ati_remote
>ati_remote: Registered USB driver ATI/X10 RF USB Remote Control v. 2.2.1
>em28xx new video device (2040:6513): interface 0, class 255
>em28xx Doesn't have usb audio class
>em28xx #0: Alternate settings: 8
>em28xx #0: Alternate setting 0, max size= 0
>em28xx #0: Alternate setting 1, max size= 0
>em28xx #0: Alternate setting 2, max size= 1448
>em28xx #0: Alternate setting 3, max size= 2048
>em28xx #0: Alternate setting 4, max size= 2304
>em28xx #0: Alternate setting 5, max size= 2580
>em28xx #0: Alternate setting 6, max size= 2892
>em28xx #0: Alternate setting 7, max size= 3072
>usbcore: registered new interface driver ueagle-atm
>em28xx #0: chip ID is em2882/em2883
>em28xx #0: i2c eeprom 00: 1a eb 67 95 40 20 13 65 d0 12 5c 03 82 1e 6a 18
>em28xx #0: i2c eeprom 10: 00 00 24 57 66 07 01 00 00 00 00 00 00 00 00 00
>em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 02 00 b8 00 00 00 5b 1c 00 00
>em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 01 01 01 01 00 00 00 00
>em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 18 03 34 00 30 00
>em28xx #0: i2c eeprom 70: 32 00 38 00 35 00 32 00 36 00 31 00 38 00 30 00
>em28xx #0: i2c eeprom 80: 00 00 1e 03 57 00 69 00 6e 00 54 00 56 00 20 00
>em28xx #0: i2c eeprom 90: 48 00 56 00 52 00 2d 00 39 00 38 00 30 00 00 00
>em28xx #0: i2c eeprom a0: 84 12 00 00 05 50 1a 7f d4 78 23 b1 fe d0 18 85
>em28xx #0: i2c eeprom b0: ff 00 00 00 04 84 0a 00 01 01 20 77 00 40 64 6e
>em28xx #0: i2c eeprom c0: 1e f0 74 02 01 00 01 79 b6 00 00 00 00 00 00 00
>em28xx #0: i2c eeprom d0: 84 12 00 00 05 50 1a 7f d4 78 23 b1 fe d0 18 85
>em28xx #0: i2c eeprom e0: ff 00 00 00 04 84 0a 00 01 01 20 77 00 40 64 6e
>em28xx #0: i2c eeprom f0: 1e f0 74 02 01 00 01 79 b6 00 00 00 00 00 00 00
>EEPROM ID= 0x9567eb1a, hash = 0x031f24dd
>Vendor/Product ID= 2040:6513
>AC97 audio (5 sample rates)
>500mA max power
>Table at 0x24, strings=0x1e82, 0x186a, 0x0000
>tveeprom 1-0050: Hauppauge model 65201, rev A1C0, serial# 1994340
>tveeprom 1-0050: tuner model is Xceive XC3028 (idx 120, type 71)
>tveeprom 1-0050: TV standards PAL(B/G) PAL(I) PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xd4)
>tveeprom 1-0050: audio processor is None (idx 0)
>tveeprom 1-0050: has radio
>tuner' 1-0061: chip found @ 0xc2 (em28xx #0)
>usb 1-1: new low speed USB device using uhci_hcd and address 3
>xc2028 1-0061: creating new instance
>xc2028 1-0061: type set to XCeive xc2028/xc3028 tuner
>firmware: requesting xc3028-v27.fw
>xc2028 1-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7
>xc2028 1-0061: Loading firmware for type=BASE MTS (5), id 0000000000000000.
>usb 1-1: configuration #1 chosen from 1 choice
>input: X10 Wireless Technology Inc USB Receiver as /class/input/input4
>ati_remote: Weird data, len=1 ff 00 00 00 14 20 ...
>usb 2-1: new full speed USB device using uhci_hcd and address 4
>usb 2-1: configuration #1 chosen from 1 choice
>usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0162
>scsi6 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 4
>usb-storage: waiting for device to settle before scanning
>usb 2-2: new full speed USB device using uhci_hcd and address 5
>usb 2-2: configuration #1 chosen from 1 choice
>xc2028 1-0061: Loading firmware for type=MTS (4), id ffffffffffffffff.
>usb 2-2: [ueagle-atm] ADSL device founded vid (0X1110) pid (0X900F) Rev (0X410B): Eagle I
>usb 2-2: reset full speed USB device using uhci_hcd and address 5
>tvp5150 1-005c: tvp5150am1 detected.
>usb 2-2: [ueagle-atm] using iso mode
>usb 2-2: [ueagle-atm] (re)booting started
>em28xx #0: V4L2 device registered as /dev/video0 and /dev/vbi0
>em28xx #0: Found Hauppauge WinTV HVR 950
>usbcore: registered new interface driver em28xx
>em28xx-audio.c: probing for em28x1 non standard usbaudio
>em28xx-audio.c: Copyright (C) 2006 Markus Rechberger
>Em28xx: Initialized (Em28xx Audio Extension) extension
>xc2028 1-0061: attaching existing instance
>xc2028 1-0061: type set to XCeive xc2028/xc3028 tuner
>em28xx #0/2: xc3028 attached
>DVB: registering new adapter (em28xx #0)
>DVB: registering frontend 0 (LG Electronics LGDT3303 VSB/QAM Frontend)...
>Successfully loaded em28xx-dvb
>Em28xx: Initialized (Em28xx dvb Extension) extension
>firmware: requesting ueagle-atm/DSPep.bin
>usb 2-2: [ueagle-atm] ATU-R firmware version : 44e2ea17
>firmware: requesting ueagle-atm/CMVep.bin.v2
>usb 2-2: [Ueagle-atm] requesting firmware ueagle-atm/CMVep.bin.v2 failed, try to get older cmvs
>firmware: requesting ueagle-atm/CMVep.bin
>usb 2-2: [Ueagle-atm] use deprecated cmvs version, please update your firmware
>usb 2-2: [ueagle-atm] modem started, waiting synchronization...
>scsi 5:0:0:0: Direct-Access     Maxtor   OneTouch         0125 PQ: 0 ANSI: 4
>sd 5:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB)
>sd 5:0:0:0: [sdc] Write Protect is off
>sd 5:0:0:0: [sdc] Mode Sense: 2d 08 00 00
>sd 5:0:0:0: [sdc] Assuming drive cache: write through
>sd 5:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB)
>sd 5:0:0:0: [sdc] Write Protect is off
>sd 5:0:0:0: [sdc] Mode Sense: 2d 08 00 00
>sd 5:0:0:0: [sdc] Assuming drive cache: write through
> sdc:
>sd 5:0:0:0: [sdc] Attached SCSI disk
>sd 5:0:0:0: Attached scsi generic sg3 type 0
>usb-storage: device scan complete
>PPP generic driver version 2.4.2
>p4-clockmod: Unknown p4-clockmod-capable CPU. Please send an e-mail to <cpufreq@vger.kernel.org>
>p4-clockmod: Unknown p4-clockmod-capable CPU. Please send an e-mail to <cpufreq@vger.kernel.org>
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>Filesystem "dm-3": Disabling barriers, trial barrier write failed
>XFS mounting filesystem dm-3
>scsi 6:0:0:0: Direct-Access     Brother  MFC-420CN        1.00 PQ: 0 ANSI: 2
>sd 6:0:0:0: [sdd] Attached SCSI removable disk
>sd 6:0:0:0: Attached scsi generic sg4 type 0
>usb-storage: device scan complete
>Ending clean XFS mount for filesystem: dm-3
>EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
>Filesystem "dm-5": Disabling barriers, trial barrier write failed
>XFS mounting filesystem dm-5
>Ending clean XFS mount for filesystem: dm-5
>Filesystem "dm-1": Disabling barriers, trial barrier write failed
>XFS mounting filesystem dm-1
>Ending clean XFS mount for filesystem: dm-1
>Filesystem "dm-2": Disabling barriers, trial barrier write failed
>XFS mounting filesystem dm-2
>Ending clean XFS mount for filesystem: dm-2
>Adding 524280k swap on /dev/mapper/disks-swap.  Priority:-1 extents:1 across:524280k
>usb 2-2: [ueagle-atm] modem operational
>ip_tables: (C) 2000-2006 Netfilter Core Team
>r8169: eth0: link up
>r8169: eth0: link up
>warning: `named' uses 32-bit capabilities (legacy support in use)
>NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
>NFSD: starting 90-second grace period
>mtrr: no MTRR for 40000000,8000000 found
>mtrr: no MTRR for 40000000,8000000 found
>mtrr: no MTRR for 40000000,8000000 found

Actions: View

Attachments on bug 18210: 19850 | 19851 | 19852 | 19853 | 19854

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.