Attachment 21558 Details for Bug 19322 – xorg.conf, xorg.0.log, dmesg, xrandr --verbose

xorg.conf, xorg.0.log, dmesg, xrandr --verbose

information.txt (text/plain), 69.35 KB, created by S B on 2008-12-29 18:33:16 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: S B

Created: 2008-12-29 18:33:16 UTC

Size: 69.35 KB

patch

obsolete

># xorg.conf (X.Org X Window System server configuration file)
>#
># This file was generated by dexconf, the Debian X Configuration tool, using
># values from the debconf database.
>#
># Edit this file with caution, and see the xorg.conf manual page.
># (Type "man xorg.conf" at the shell prompt.)
>#
># This file is automatically updated on xserver-xorg package upgrades *only*
># if it has not been modified since the last upgrade of the xserver-xorg
># package.
>#
># Note that some configuration settings that could be done previously
># in this file, now are automatically configured by the server and settings
># here are ignored.
>#
># If you have edited this file but would like it to be automatically updated
># again, run the following command:
>#   sudo dpkg-reconfigure -phigh xserver-xorg
>
>Section "Device"
>	Identifier	"Configured Video Device"
>EndSection
>
>Section "Monitor"
>	Identifier	"Configured Monitor"
>EndSection
>
>Section "Screen"
>	Identifier	"Default Screen"
>	Monitor		"Configured Monitor"
>	Device		"Configured Video Device"
>EndSection
>
>----------
>Xorg.0.log
>----------
>
>X.Org X Server 1.5.2
>Release Date: 10 October 2008
>X Protocol Version 11, Revision 0
>Build Operating System: Linux 2.6.24-19-server i686 Ubuntu
>Current Operating System: Linux Tux 2.6.27-8-generic #1 SMP Thu Nov 6 17:33:54 UTC 2008 i686
>Build Date: 24 October 2008  08:00:16AM
>xorg-server 2:1.5.2-2ubuntu3 (buildd@rothera.buildd) 
>	Before reporting problems, check http://wiki.x.org
>	to make sure that you have the latest version.
>Module Loader present
>Markers: (--) probed, (**) from config file, (==) default setting,
>	(++) from command line, (!!) notice, (II) informational,
>	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
>(==) Log file: "/var/log/Xorg.0.log", Time: Mon Dec 29 15:09:27 2008
>(==) Using config file: "/etc/X11/xorg.conf"
>(==) No Layout section.  Using the first Screen section.
>(**) |-->Screen "Default Screen" (0)
>(**) |   |-->Monitor "Configured Monitor"
>(**) |   |-->Device "Configured Video Device"
>(==) Automatically adding devices
>(==) Automatically enabling devices
>(==) No FontPath specified.  Using compiled-in default.
>(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
>	Entry deleted from font path.
>(==) FontPath set to:
>	/usr/share/fonts/X11/misc,
>	/usr/share/fonts/X11/100dpi/:unscaled,
>	/usr/share/fonts/X11/75dpi/:unscaled,
>	/usr/share/fonts/X11/Type1,
>	/usr/share/fonts/X11/100dpi,
>	/usr/share/fonts/X11/75dpi,
>	/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType
>(==) ModulePath set to "/usr/lib/xorg/modules"
>(II) Cannot locate a core pointer device.
>(II) Cannot locate a core keyboard device.
>(II) The server relies on HAL to provide the list of input devices.
>	If no devices become available, reconfigure HAL or disable AllowEmptyInput.
>(II) Open ACPI successful (/var/run/acpid.socket)
>(II) Loader magic: 0x81d9a40
>(II) Module ABI versions:
>	X.Org ANSI C Emulation: 0.4
>	X.Org Video Driver: 4.1
>	X.Org XInput driver : 2.1
>	X.Org Server Extension : 1.1
>	X.Org Font Renderer : 0.6
>(II) Loader running on linux
>(++) using VT number 7
>
>(--) PCI:*(0@0:2:0) Intel Corporation 82852/855GM Integrated Graphics Device rev 2, Mem @ 0xe8000000/0, 0xe0000000/0, I/O @ 0x00001800/0
>(--) PCI: (0@0:2:1) Intel Corporation 82852/855GM Integrated Graphics Device rev 2, Mem @ 0xf0000000/0, 0xe0080000/0
>(II) System resource ranges:
>	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
>	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
>	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
>	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
>	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
>	[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
>(II) LoadModule: "extmod"
>
>(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
>(II) Module extmod: vendor="X.Org Foundation"
>	compiled for 1.5.2, module version = 1.0.0
>	Module class: X.Org Server Extension
>	ABI class: X.Org Server Extension, version 1.1
>(II) Loading extension SHAPE
>(II) Loading extension MIT-SUNDRY-NONSTANDARD
>(II) Loading extension BIG-REQUESTS
>(II) Loading extension SYNC
>(II) Loading extension MIT-SCREEN-SAVER
>(II) Loading extension XC-MISC
>(II) Loading extension XFree86-VidModeExtension
>(II) Loading extension XFree86-Misc
>(II) Loading extension XFree86-DGA
>(II) Loading extension DPMS
>(II) Loading extension TOG-CUP
>(II) Loading extension Extended-Visual-Information
>(II) Loading extension XVideo
>(II) Loading extension XVideo-MotionCompensation
>(II) Loading extension X-Resource
>(II) LoadModule: "dbe"
>
>(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
>(II) Module dbe: vendor="X.Org Foundation"
>	compiled for 1.5.2, module version = 1.0.0
>	Module class: X.Org Server Extension
>	ABI class: X.Org Server Extension, version 1.1
>(II) Loading extension DOUBLE-BUFFER
>(II) LoadModule: "glx"
>
>(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
>(II) Module glx: vendor="X.Org Foundation"
>	compiled for 1.5.2, module version = 1.0.0
>	ABI class: X.Org Server Extension, version 1.1
>(==) AIGLX enabled
>(==) Exporting typical set of GLX visuals
>(II) Loading extension GLX
>(II) LoadModule: "freetype"
>
>(II) Loading /usr/lib/xorg/modules//fonts/libfreetype.so
>(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
>	compiled for 1.5.2, module version = 2.1.0
>	Module class: X.Org Font Renderer
>	ABI class: X.Org Font Renderer, version 0.6
>(II) Loading font FreeType
>(II) LoadModule: "record"
>
>(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
>(II) Module record: vendor="X.Org Foundation"
>	compiled for 1.5.2, module version = 1.13.0
>	Module class: X.Org Server Extension
>	ABI class: X.Org Server Extension, version 1.1
>(II) Loading extension RECORD
>(II) LoadModule: "dri"
>
>(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
>(II) Module dri: vendor="X.Org Foundation"
>	compiled for 1.5.2, module version = 1.0.0
>	ABI class: X.Org Server Extension, version 1.1
>(II) Loading extension XFree86-DRI
>(II) Scanning /usr/share/xserver-xorg/pci directory for additional PCI ID's supported by the drivers
>(II) Matched intel from file name intel.ids
>(==) Matched intel for the autoconfigured driver
>(==) Assigned the driver to the xf86ConfigLayout
>(II) LoadModule: "intel"
>
>(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
>(II) Module intel: vendor="X.Org Foundation"
>	compiled for 1.5.2, module version = 2.4.1
>	Module class: X.Org Video Driver
>	ABI class: X.Org Video Driver, version 4.1
>(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
>	i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
>	E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ,
>	965GM, 965GME/GLE, G33, Q35, Q33,
>	Mobile IntelÂ® GM45 Express Chipset,
>	Intel Integrated Graphics Device, G45/G43, Q45/Q43
>(II) Primary Device is: PCI 00@00:02:0
>(II) resource ranges after xf86ClaimFixedResources() call:
>	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
>	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
>	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
>	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
>	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
>	[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
>(II) resource ranges after probing:
>	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
>	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
>	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
>	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
>	[4] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B]
>	[5] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
>	[6] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
>	[7] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
>	[8] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
>	[9] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B]
>	[10] 0	0	0x000003c0 - 0x000003df (0x20) IS[B]
>(II) Loading sub module "int10"
>(II) LoadModule: "int10"
>
>(II) Loading /usr/lib/xorg/modules//libint10.so
>(II) Module int10: vendor="X.Org Foundation"
>	compiled for 1.5.2, module version = 1.0.0
>	ABI class: X.Org Video Driver, version 4.1
>(II) Loading sub module "vbe"
>(II) LoadModule: "vbe"
>
>(II) Loading /usr/lib/xorg/modules//libvbe.so
>(II) Module vbe: vendor="X.Org Foundation"
>	compiled for 1.5.2, module version = 1.1.0
>	ABI class: X.Org Video Driver, version 4.1
>(II) Loading sub module "vgahw"
>(II) LoadModule: "vgahw"
>
>(II) Loading /usr/lib/xorg/modules//libvgahw.so
>(II) Module vgahw: vendor="X.Org Foundation"
>	compiled for 1.5.2, module version = 0.1.0
>	ABI class: X.Org Video Driver, version 4.1
>(II) intel(0): Creating default Display subsection in Screen section
>	"Default Screen" for depth/fbbpp 24/32
>(==) intel(0): Depth 24, (==) framebuffer bpp 32
>(==) intel(0): RGB weight 888
>(==) intel(0): Default visual is TrueColor
>(II) intel(0): Integrated Graphics Chipset: Intel(R) 852GM
>(--) intel(0): Chipset: "852GM/855GM"
>(--) intel(0): Linear framebuffer at 0xE8000000
>(--) intel(0): IO registers at addr 0xE0000000
>(II) intel(0): 2 display pipes available.
>(==) intel(0): Using EXA for acceleration
>(II) Loading sub module "int10"
>(II) LoadModule: "int10"
>
>(II) Reloading /usr/lib/xorg/modules//libint10.so
>(II) intel(0): initializing int10
>(II) intel(0): Primary V_BIOS segment is: 0xc000
>(II) intel(0): VESA BIOS detected
>(II) intel(0): VESA VBE Version 3.0
>(II) intel(0): VESA VBE Total Mem: 16192 kB
>(II) intel(0): VESA VBE OEM: Intel(r)852MG/852MGE/855MG/855MGE Graphics Chip Accelerated VGA BIOS
>(II) intel(0): VESA VBE OEM Software Rev: 1.0
>(II) intel(0): VESA VBE OEM Vendor: Intel Corporation
>(II) intel(0): VESA VBE OEM Product: Intel(r)852MG/852MGE/855MG/855MGE Graphics Controller
>(II) intel(0): VESA VBE OEM Product Rev: Hardware Version 0.0
>(II) Loading sub module "ddc"
>(II) LoadModule: "ddc"
>(II) Module "ddc" already built-in
>(II) Loading sub module "i2c"
>(II) LoadModule: "i2c"
>(II) Module "i2c" already built-in
>(II) intel(0): Output VGA using monitor section Configured Monitor
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): Output LVDS has no monitor section
>(II) intel(0): I2C bus "LVDSDDC_C" initialized.
>(II) intel(0): Attempting to determine panel fixed mode.
>(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "LVDSDDC_C:ddc2" removed.
>(II) intel(0): found backlight control method /sys/class/backlight/acpi_video0
>(II) intel(0): I2C bus "DVODDC_D" initialized.
>(II) Loading sub module "sil164"
>(II) LoadModule: "sil164"
>
>(II) Loading /usr/lib/xorg/modules/drivers//sil164.so
>(II) Module sil164: vendor="X.Org Foundation"
>	compiled for 1.5.2, module version = 1.0.0
>	ABI class: X.Org Video Driver, version 4.1
>(II) intel(0): I2C bus "DVOI2C_E" initialized.
>(II) Loading sub module "ch7xxx"
>(II) LoadModule: "ch7xxx"
>
>(II) Loading /usr/lib/xorg/modules/drivers//ch7xxx.so
>(II) Module ch7xxx: vendor="X.Org Foundation"
>	compiled for 1.5.2, module version = 1.0.0
>	ABI class: X.Org Video Driver, version 4.1
>(II) intel(0): I2C bus "DVOI2C_E" removed.
>(II) intel(0): I2C bus "DVOI2C_E" initialized.
>(II) intel(0): Detected CH7009A chipset, vendor/device ID 0x84/0x17
>(II) intel(0): I2C device "DVOI2C_E:CH7xxx TMDS Controller" registered at address 0xEC.
>(II) intel(0): Output TMDS has no monitor section
>(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "LVDSDDC_C:ddc2" removed.
>(II) intel(0): Output VGA disconnected
>(II) intel(0): Output LVDS connected
>(II) intel(0): Output TMDS disconnected
>(II) intel(0): Using exact sizes for initial modes
>(II) intel(0): Output LVDS using initial mode 1400x1050
>(II) intel(0): Monitoring connected displays enabled
>(II) intel(0): detected 128 kB GTT.
>(II) intel(0): detected 16252 kB stolen memory.
>(==) intel(0): video overlay key set to 0x101fe
>(==) intel(0): Will not try to enable page flipping
>(==) intel(0): Triple buffering disabled
>(==) intel(0): Intel XvMC decoder disabled
>(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
>(==) intel(0): DPI set to (96, 96)
>(II) Loading sub module "fb"
>(II) LoadModule: "fb"
>
>(II) Loading /usr/lib/xorg/modules//libfb.so
>(II) Module fb: vendor="X.Org Foundation"
>	compiled for 1.5.2, module version = 1.0.0
>	ABI class: X.Org ANSI C Emulation, version 0.4
>(II) Loading sub module "exa"
>(II) LoadModule: "exa"
>
>(II) Loading /usr/lib/xorg/modules//libexa.so
>(II) Module exa: vendor="X.Org Foundation"
>	compiled for 1.5.2, module version = 2.4.0
>	ABI class: X.Org Video Driver, version 4.1
>(II) Loading sub module "ramdac"
>(II) LoadModule: "ramdac"
>(II) Module "ramdac" already built-in
>(II) intel(0): Comparing regs from server start up to After PreInit
>(WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd0000009
>(WW) intel(0): PP_STATUS before: on, ready, sequencing idle
>(WW) intel(0): PP_STATUS after: on, ready, sequencing on
>(WW) intel(0): Register 0x71024 (PIPEBSTAT) changed from 0x80000202 to 0x00000202
>(WW) intel(0): PIPEBSTAT before: status: FIFO_UNDERRUN VSYNC_INT_STATUS VBLANK_INT_STATUS
>(WW) intel(0): PIPEBSTAT after: status: VSYNC_INT_STATUS VBLANK_INT_STATUS
>(==) Depth 24 pixmap format is 32 bpp
>(II) do I need RAC?  No, I don't.
>(II) resource ranges after preInit:
>	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
>	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
>	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
>	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
>	[4] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
>	[5] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
>	[6] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
>	[7] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
>	[8] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
>	[9] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
>	[10] 0	0	0x000003c0 - 0x000003df (0x20) IS[B](OprU)
>(II) intel(0): Kernel reported 236544 total, 1 used
>(II) intel(0): I830CheckAvailableMemory: 946172 kB available
>drmOpenDevice: node name is /dev/dri/card0
>drmOpenDevice: open result is -1, (No such device or address)
>drmOpenDevice: open result is -1, (No such device or address)
>drmOpenDevice: Open failed
>drmOpenDevice: node name is /dev/dri/card0
>drmOpenDevice: open result is -1, (No such device or address)
>drmOpenDevice: open result is -1, (No such device or address)
>drmOpenDevice: Open failed
>drmOpenByBusid: Searching for BusID pci:0000:00:02.0
>drmOpenDevice: node name is /dev/dri/card0
>drmOpenDevice: open result is 11, (OK)
>drmOpenByBusid: drmOpenMinor returns 11
>drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
>(II) [drm] loaded kernel module for "i915" driver.
>(II) [drm] DRM interface version 1.3
>(II) [drm] DRM open master succeeded.
>(II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
>(II) intel(0): [drm] framebuffer mapped by ddx driver
>(II) intel(0): [drm] added 1 reserved context for kernel
>(II) intel(0): X context handle = 0x1
>(II) intel(0): [drm] installed DRM signal handler
>(**) intel(0): Framebuffer compression enabled
>(**) intel(0): Tiling enabled
>(==) intel(0): VideoRam: 131072 KB
>(II) intel(0): Attempting memory allocation with tiled buffers.
>(WW) intel(0): xf86AllocateGARTMemory: allocation of 1536 pages failed
>	(Cannot allocate memory)
>(WW) intel(0): Allocation error, framebuffer compression disabled
>(WW) intel(0): xf86AllocateGARTMemory: allocation of 10 pages failed
>	(Cannot allocate memory)
>(WW) intel(0): Failed to allocate texture space.
>(II) intel(0): Tiled allocation failed.
>(II) intel(0): Attempting memory allocation with untiled buffers.
>(WW) intel(0): xf86AllocateGARTMemory: allocation of 10 pages failed
>	(Cannot allocate memory)
>(II) intel(0): Untiled allocation successful.
>(II) intel(0): [drm] Registers = 0xe0000000
>(II) intel(0): [drm] ring buffer = 0xe8000000
>(II) intel(0): [drm] mapped front buffer at 0xe8030000, handle = 0xe8030000
>(II) intel(0): [drm] mapped back buffer at 0xe87b5000, handle = 0xe87b5000
>(II) intel(0): [drm] mapped depth buffer at 0xea679000, handle = 0xea679000
>(II) intel(0): [drm] mapped classic textures at 0xeadfe000, handle = 0xeadfe000
>(II) intel(0): [drm] Initialized kernel agp heap manager, 33554432
>(II) intel(0): [dri] visual configs initialized
>(II) intel(0): Page Flipping disabled
>(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
>(II) EXA(0): Offscreen pixmap area of 23654400 bytes
>(II) EXA(0): Driver registered support for the following operations:
>(II)         Solid
>(II)         Copy
>(II)         Composite (RENDER acceleration)
>(==) intel(0): Backing store disabled
>(==) intel(0): Silken mouse enabled
>(II) intel(0): Initializing HW Cursor
>(II) intel(0): [DRI] installation complete
>(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x00fdf000 (pgoffset 4063)
>(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x00fe0000 (pgoffset 4064)
>(II) intel(0): xf86BindGARTMemory: bind key 2 at 0x00fe4000 (pgoffset 4068)
>(II) intel(0): xf86BindGARTMemory: bind key 3 at 0x00fe5000 (pgoffset 4069)
>(II) intel(0): xf86BindGARTMemory: bind key 4 at 0x00fe9000 (pgoffset 4073)
>(II) intel(0): xf86BindGARTMemory: bind key 5 at 0x00fea000 (pgoffset 4074)
>(II) intel(0): xf86BindGARTMemory: bind key 6 at 0x02679000 (pgoffset 9849)
>(II) intel(0): xf86BindGARTMemory: bind key 7 at 0x02dfe000 (pgoffset 11774)
>(II) intel(0): Fixed memory allocation layout:
>(II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
>(II) intel(0): 0x00020000-0x00027fff: logical 3D context (32 kB)
>(II) intel(0): 0x00030000-0x007b4fff: front buffer (7700 kB)
>(II) intel(0): 0x007b5000-0x00f39fff: back buffer (7700 kB)
>(II) intel(0): 0x00fdf000:            end of stolen memory
>(II) intel(0): 0x00fdf000-0x00fdffff: Core cursor (4 kB, 0x000000002a660000 physical
>)
>(II) intel(0): 0x00fe0000-0x00fe3fff: ARGB cursor (16 kB, 0x000000002a404000 physical
>)
>(II) intel(0): 0x00fe4000-0x00fe4fff: Core cursor (4 kB, 0x000000002b646000 physical
>)
>(II) intel(0): 0x00fe5000-0x00fe8fff: ARGB cursor (16 kB, 0x000000002aae4000 physical
>)
>(II) intel(0): 0x00fe9000-0x00fe9fff: overlay registers (4 kB, 0x000000002a65b000 physical
>)
>(II) intel(0): 0x00fea000-0x02678fff: exa offscreen (23100 kB)
>(II) intel(0): 0x02679000-0x02dfdfff: depth buffer (7700 kB)
>(II) intel(0): 0x02dfe000-0x04dfdfff: classic textures (32768 kB)
>(II) intel(0): 0x08000000:            end of aperture
>(II) intel(0): using SSC reference clock of 100 MHz
>(WW) intel(0): Chosen PLL clock of 100.0 Mhz more than 2% away from desired 108.0 Mhz
>(II) intel(0): Selecting standard 18 bit TMDS pixel format.
>(II) intel(0): Output configuration:
>(II) intel(0):   Pipe A is off
>(II) intel(0):   Display plane A is now enabled and connected to pipe A.
>(WW) intel(0):   Hardware claims pipe A is on while software believes it is off
>(WW) intel(0):   Hardware claims plane A is on while software believes it is off
>(II) intel(0):   Pipe B is on
>(II) intel(0):   Display plane B is now enabled and connected to pipe B.
>(II) intel(0):   Output VGA is connected to pipe none
>(II) intel(0):   Output LVDS is connected to pipe B
>(II) intel(0):   Output TMDS is connected to pipe none
>(II) intel(0): [drm] dma control initialized, using IRQ 16
>(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
>(II) intel(0): DPMS enabled
>(II) intel(0): Set up overlay video
>(II) intel(0): direct rendering: Enabled
>(--) RandR disabled
>(II) Initializing built-in extension MIT-SHM
>(II) Initializing built-in extension XInputExtension
>(II) Initializing built-in extension XTEST
>(II) Initializing built-in extension XKEYBOARD
>(II) Initializing built-in extension XC-APPGROUP
>(II) Initializing built-in extension SECURITY
>(II) Initializing built-in extension XINERAMA
>(II) Initializing built-in extension XFIXES
>(II) Initializing built-in extension RENDER
>(II) Initializing built-in extension RANDR
>(II) Initializing built-in extension COMPOSITE
>(II) Initializing built-in extension DAMAGE
>(II) Initializing built-in extension XEVIE
>drmOpenDevice: node name is /dev/dri/card0
>drmOpenDevice: open result is 12, (OK)
>drmOpenByBusid: Searching for BusID pci:0000:00:02.0
>drmOpenDevice: node name is /dev/dri/card0
>drmOpenDevice: open result is 12, (OK)
>drmOpenByBusid: drmOpenMinor returns 12
>drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
>(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
>(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
>(II) AIGLX: enabled GLX_texture_from_pixmap with driver support
>(II) AIGLX: Loaded and initialized /usr/lib/dri/i915_dri.so
>(II) GLX: Initialized DRI GL provider for screen 0
>(II) intel(0): Setting screen physical size to 370 x 277
>(EE) intel(0): underrun on pipe B!
>(II) config/hal: Adding input device Macintosh mouse button emulation
>(II) LoadModule: "evdev"
>
>(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
>(II) Module evdev: vendor="X.Org Foundation"
>	compiled for 1.5.2, module version = 2.0.99
>	Module class: X.Org XInput Driver
>	ABI class: X.Org XInput driver, version 2.1
>(**) Macintosh mouse button emulation: always reports core events
>(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
>(II) Macintosh mouse button emulation: Found x and y relative axes
>(II) Macintosh mouse button emulation: Found 3 mouse buttons
>(II) Macintosh mouse button emulation: Configuring as mouse
>(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
>(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
>(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
>(II) config/hal: Adding input device AlpsPS/2 ALPS GlidePoint
>(II) LoadModule: "synaptics"
>
>(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
>(II) Module synaptics: vendor="X.Org Foundation"
>	compiled for 1.5.2, module version = 0.15.2
>	Module class: X.Org XInput Driver
>	ABI class: X.Org XInput driver, version 2.1
>(II) Synaptics touchpad driver version 0.15.2
>(II) AlpsPS/2 ALPS GlidePoint: x-axis range 0 - 1023
>(II) AlpsPS/2 ALPS GlidePoint: y-axis range 0 - 767
>(**) Option "Device" "/dev/input/event8"
>(--) AlpsPS/2 ALPS GlidePoint touchpad found
>(**) AlpsPS/2 ALPS GlidePoint: always reports core events
>(II) XINPUT: Adding extended input device "AlpsPS/2 ALPS GlidePoint" (type: TOUCHPAD)
>(II) AlpsPS/2 ALPS GlidePoint: x-axis range 0 - 1023
>(II) AlpsPS/2 ALPS GlidePoint: y-axis range 0 - 767
>(--) AlpsPS/2 ALPS GlidePoint touchpad found
>(II) config/hal: Adding input device PS/2 Mouse
>(**) PS/2 Mouse: always reports core events
>(**) PS/2 Mouse: Device: "/dev/input/event7"
>(II) PS/2 Mouse: Found x and y relative axes
>(II) PS/2 Mouse: Found 3 mouse buttons
>(II) PS/2 Mouse: Configuring as mouse
>(II) XINPUT: Adding extended input device "PS/2 Mouse" (type: MOUSE)
>(**) PS/2 Mouse: YAxisMapping: buttons 4 and 5
>(**) PS/2 Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
>(II) config/hal: Adding input device AT Translated Set 2 keyboard
>(**) AT Translated Set 2 keyboard: always reports core events
>(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
>(II) AT Translated Set 2 keyboard: Found keys
>(II) AT Translated Set 2 keyboard: Configuring as keyboard
>(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
>(**) Option "xkb_rules" "evdev"
>(**) AT Translated Set 2 keyboard: xkb_rules: "evdev"
>(**) Option "xkb_model" "pc105"
>(**) AT Translated Set 2 keyboard: xkb_model: "pc105"
>(**) Option "xkb_layout" "us"
>(**) AT Translated Set 2 keyboard: xkb_layout: "us"
>(II) config/hal: Adding input device Logitech USB Receiver
>(**) Logitech USB Receiver: always reports core events
>(**) Logitech USB Receiver: Device: "/dev/input/event2"
>(II) Logitech USB Receiver: Found x and y relative axes
>(II) Logitech USB Receiver: Found 8 mouse buttons
>(II) Logitech USB Receiver: Configuring as mouse
>(II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE)
>(**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5
>(**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
>(II) config/hal: Adding input device Video Bus
>(**) Video Bus: always reports core events
>(**) Video Bus: Device: "/dev/input/event9"
>(II) Video Bus: Found keys
>(II) Video Bus: Configuring as keyboard
>(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
>(**) Option "xkb_rules" "evdev"
>(**) Video Bus: xkb_rules: "evdev"
>(**) Option "xkb_model" "pc105"
>(**) Video Bus: xkb_model: "pc105"
>(**) Option "xkb_layout" "us"
>(**) Video Bus: xkb_layout: "us"
>(EE) intel(0): tried to update DSPARB with both planes enabled!
>(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "LVDSDDC_C:ddc2" removed.
>(EE) intel(0): underrun on pipe B!
>(EE) intel(0): underrun on pipe B!
>(EE) intel(0): tried to update DSPARB with both planes enabled!
>(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "LVDSDDC_C:ddc2" removed.
>AUDIT: Mon Dec 29 15:09:45 2008: 5777 X: client 4 rejected from local host ( uid=1000 gid=1000 pid=6027 )
>AUDIT: Mon Dec 29 15:09:45 2008: 5777 X: client 4 rejected from local host ( uid=1000 gid=1000 pid=6028 )
>AUDIT: Mon Dec 29 15:09:45 2008: 5777 X: client 4 rejected from local host ( uid=1000 gid=1000 pid=6029 )
>(EE) intel(0): tried to update DSPARB with both planes enabled!
>(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "LVDSDDC_C:ddc2" removed.
>(EE) intel(0): tried to update DSPARB with both planes enabled!
>(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "LVDSDDC_C:ddc2" removed.
>(EE) intel(0): tried to update DSPARB with both planes enabled!
>(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "LVDSDDC_C:ddc2" removed.
>(EE) intel(0): tried to update DSPARB with both planes enabled!
>(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "LVDSDDC_C:ddc2" removed.
>(EE) intel(0): tried to update DSPARB with both planes enabled!
>(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "LVDSDDC_C:ddc2" removed.
>(EE) intel(0): tried to update DSPARB with both planes enabled!
>(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "LVDSDDC_C:ddc2" removed.
>
>
>
>
>
>
>-----
>dmesg
>-----
>
>
>
>
>
>[    0.000000] Initializing cgroup subsys cpuset
>[    0.000000] Initializing cgroup subsys cpu
>[    0.000000] Linux version 2.6.27-8-generic (buildd@rothera) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu11) ) #1 SMP Thu Nov 6 17:33:54 UTC 2008 (Ubuntu 2.6.27-8.17-generic)
>[    0.000000] BIOS-provided physical RAM map:
>[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
>[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
>[    0.000000]  BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved)
>[    0.000000]  BIOS-e820: 00000000000d8000 - 0000000000100000 (reserved)
>[    0.000000]  BIOS-e820: 0000000000100000 - 000000003eee0000 (usable)
>[    0.000000]  BIOS-e820: 000000003eee0000 - 000000003eeeb000 (ACPI data)
>[    0.000000]  BIOS-e820: 000000003eeeb000 - 000000003ef00000 (ACPI NVS)
>[    0.000000]  BIOS-e820: 000000003ef00000 - 0000000040000000 (reserved)
>[    0.000000]  BIOS-e820: 00000000fec10000 - 00000000fec20000 (reserved)
>[    0.000000]  BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved)
>[    0.000000]  BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved)
>[    0.000000] last_pfn = 0x3eee0 max_arch_pfn = 0x100000
>[    0.000000] kernel direct mapping tables up to 38000000 @ 7000-c000
>[    0.000000] RAMDISK: 3781e000 - 37fef00b
>[    0.000000] DMI present.
>[    0.000000] ACPI: RSDP 000F6610, 0014 (r0 COMPAL)
>[    0.000000] ACPI: RSDT 3EEE593F, 0030 (r1 COMPAL Montara   6040000  LTP        0)
>[    0.000000] ACPI: FACP 3EEEAED2, 0074 (r1 COMPAL MONTARA   6040000 PTL        50)
>[    0.000000] ACPI: DSDT 3EEE5973, 555F (r1 COMPAL MONTARAG  6040000 MSFT  100000E)
>[    0.000000] ACPI: FACS 3EEFBFC0, 0040
>[    0.000000] ACPI: BOOT 3EEEAFD8, 0028 (r1 PTLTD  $SBFTBL$  6040000  LTP        1)
>[    0.000000] ACPI: APIC 3EEEAF7E, 005A (r1 INTEL  MONTARAG  6040000 PTL        50)
>[    0.000000] 110MB HIGHMEM available.
>[    0.000000] 896MB LOWMEM available.
>[    0.000000]   mapped low ram: 0 - 38000000
>[    0.000000]   low ram: 00000000 - 38000000
>[    0.000000]   bootmap 00008000 - 0000f000
>[    0.000000] (9 early reservations) ==> bootmem [0000000000 - 0038000000]
>[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
>[    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
>[    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
>[    0.000000]   #3 [0000100000 - 00005c0a20]    TEXT DATA BSS ==> [0000100000 - 00005c0a20]
>[    0.000000]   #4 [003781e000 - 0037fef00b]          RAMDISK ==> [003781e000 - 0037fef00b]
>[    0.000000]   #5 [00005c1000 - 00005c4000]    INIT_PG_TABLE ==> [00005c1000 - 00005c4000]
>[    0.000000]   #6 [000009f800 - 0000100000]    BIOS reserved ==> [000009f800 - 0000100000]
>[    0.000000]   #7 [0000007000 - 0000008000]          PGTABLE ==> [0000007000 - 0000008000]
>[    0.000000]   #8 [0000008000 - 000000f000]          BOOTMAP ==> [0000008000 - 000000f000]
>[    0.000000] Zone PFN ranges:
>[    0.000000]   DMA      0x00000000 -> 0x00001000
>[    0.000000]   Normal   0x00001000 -> 0x00038000
>[    0.000000]   HighMem  0x00038000 -> 0x0003eee0
>[    0.000000] Movable zone start PFN for each node
>[    0.000000] early_node_map[2] active PFN ranges
>[    0.000000]     0: 0x00000000 -> 0x0000009f
>[    0.000000]     0: 0x00000100 -> 0x0003eee0
>[    0.000000] On node 0 totalpages: 257663
>[    0.000000] free_area_init_node: node 0, pgdat c048a500, node_mem_map c1000000
>[    0.000000]   DMA zone: 3963 pages, LIFO batch:0
>[    0.000000]   Normal zone: 223300 pages, LIFO batch:31
>[    0.000000]   HighMem zone: 28134 pages, LIFO batch:7
>[    0.000000] ACPI: PM-Timer IO Port: 0x1008
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>[    0.000000] ACPI: IRQ0 used by override.
>[    0.000000] ACPI: IRQ2 used by override.
>[    0.000000] ACPI: IRQ9 used by override.
>[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
>[    0.000000] Using ACPI (MADT) for SMP configuration information
>[    0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
>[    0.000000] mapped APIC to ffffb000 (fee00000)
>[    0.000000] mapped IOAPIC to ffffa000 (fec00000)
>[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000ce000
>[    0.000000] PM: Registered nosave memory: 00000000000ce000 - 00000000000d0000
>[    0.000000] PM: Registered nosave memory: 00000000000d0000 - 00000000000d8000
>[    0.000000] PM: Registered nosave memory: 00000000000d8000 - 0000000000100000
>[    0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bec10000)
>[    0.000000] PERCPU: Allocating 41628 bytes of per cpu data
>[    0.000000] NR_CPUS: 64, nr_cpu_ids: 1, nr_node_ids 1
>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 255397
>[    0.000000] Kernel command line: root=UUID=279f079c-17ff-4b12-b989-a9bc46b15f7b ro  single
>[    0.000000] Enabling fast FPU save and restore... done.
>[    0.000000] Enabling unmasked SIMD FPU exception support... done.
>[    0.000000] Initializing CPU#0
>[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
>[    0.000000] TSC: PIT calibration confirmed by PMTIMER.
>[    0.000000] TSC: using PIT calibration value
>[    0.000000] Detected 2198.129 MHz processor.
>[    0.004000] Console: colour VGA+ 80x25
>[    0.004000] console [tty0] enabled
>[    0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>[    0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>[    0.004000] Memory: 1007396k/1031040k available (2572k kernel code, 22844k reserved, 1160k data, 424k init, 113536k highmem)
>[    0.004000] virtual kernel memory layout:
>[    0.004000]     fixmap  : 0xffc77000 - 0xfffff000   (3616 kB)
>[    0.004000]     pkmap   : 0xff400000 - 0xff800000   (4096 kB)
>[    0.004000]     vmalloc : 0xf8800000 - 0xff3fe000   ( 107 MB)
>[    0.004000]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>[    0.004000]       .init : 0xc04ab000 - 0xc0515000   ( 424 kB)
>[    0.004000]       .data : 0xc03832da - 0xc04a5680   (1160 kB)
>[    0.004000]       .text : 0xc0100000 - 0xc03832da   (2572 kB)
>[    0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
>[    0.004000] CPA: page pool initialized 1 of 1 pages preallocated
>[    0.004000] SLUB: Genslabs=12, HWalign=128, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
>[    0.004021] Calibrating delay loop (skipped), value calculated using timer frequency.. 4396.25 BogoMIPS (lpj=8792516)
>[    0.004185] Security Framework initialized
>[    0.004263] SELinux:  Disabled at boot.
>[    0.004360] AppArmor: AppArmor initialized
>[    0.004442] Mount-cache hash table entries: 512
>[    0.004793] Initializing cgroup subsys ns
>[    0.004864] Initializing cgroup subsys cpuacct
>[    0.004931] Initializing cgroup subsys memory
>[    0.005019] CPU: Trace cache: 12K uops, L1 D cache: 8K
>[    0.005123] CPU: L2 cache: 512K
>[    0.005188] CPU: Hyper-Threading is disabled
>[    0.005273] Checking 'hlt' instruction... OK.
>[    0.020750] SMP alternatives: switching to UP code
>[    0.030883] Freeing SMP alternatives: 11k freed
>[    0.030959] ACPI: Core revision 20080609
>[    0.035181] ACPI: Checking initramfs for custom DSDT
>[    0.472237] ENABLING IO-APIC IRQs
>[    0.472491] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>[    0.514527] CPU0: Intel Mobile Intel(R) Pentium(R) 4 - M CPU 2.20GHz stepping 09
>[    0.516031] Brought up 1 CPUs
>[    0.516031] Total of 1 processors activated (4396.25 BogoMIPS).
>[    0.516031] CPU0 attaching sched-domain:
>[    0.516031]  domain 0: span 0 level CPU
>[    0.516031]   groups: 0
>[    0.516031] net_namespace: 840 bytes
>[    0.516031] Booting paravirtualized kernel on bare hardware
>[    0.516031] Time: 20:08:34  Date: 12/29/08
>[    0.516031] NET: Registered protocol family 16
>[    0.516031] EISA bus registered
>[    0.516031] ACPI: bus type pci registered
>[    0.516031] PCI: PCI BIOS revision 2.10 entry at 0xfd7f4, last bus=2
>[    0.516031] PCI: Using configuration type 1 for base access
>[    0.518574] ACPI: EC: Look up EC in DSDT
>[    0.525576] ACPI: Interpreter enabled
>[    0.525648] ACPI: (supports S0 S3 S4 S5)
>[    0.525862] ACPI: Using IOAPIC for interrupt routing
>[    0.528051] ACPI: EC: non-query interrupt received, switching to interrupt mode
>[    0.544103] ACPI: EC: non-query interrupt received, switching to interrupt mode
>[    0.670121] ACPI: EC: GPE = 0x1d, I/O: command/status = 0x66, data = 0x62
>[    0.670198] ACPI: EC: driver started in poll mode
>[    0.670353] ACPI: PCI Root Bridge [PCI0] (0000:00)
>[    0.670657] PCI: 0000:00:02.0 reg 10 32bit mmio: [e8000000, efffffff]
>[    0.670665] PCI: 0000:00:02.0 reg 14 32bit mmio: [e0000000, e007ffff]
>[    0.670672] PCI: 0000:00:02.0 reg 18 io port: [1800, 1807]
>[    0.670698] pci 0000:00:02.0: supports D1
>[    0.670720] PCI: 0000:00:02.1 reg 10 32bit mmio: [f0000000, f7ffffff]
>[    0.670728] PCI: 0000:00:02.1 reg 14 32bit mmio: [e0080000, e00fffff]
>[    0.670758] pci 0000:00:02.1: supports D1
>[    0.670840] PCI: 0000:00:1d.0 reg 20 io port: [1820, 183f]
>[    0.670897] PCI: 0000:00:1d.1 reg 20 io port: [1840, 185f]
>[    0.670955] PCI: 0000:00:1d.2 reg 20 io port: [1860, 187f]
>[    0.671022] PCI: 0000:00:1d.7 reg 10 32bit mmio: [e0100000, e01003ff]
>[    0.671080] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>[    0.671154] pci 0000:00:1d.7: PME# disabled
>[    0.671299] HPET not enabled in BIOS. You might try hpet=force boot option
>[    0.671377] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
>[    0.671471] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH4 GPIO
>[    0.671561] PCI: 0000:00:1f.1 reg 10 io port: [0, 7]
>[    0.671569] PCI: 0000:00:1f.1 reg 14 io port: [0, 3]
>[    0.671577] PCI: 0000:00:1f.1 reg 18 io port: [0, 7]
>[    0.671586] PCI: 0000:00:1f.1 reg 1c io port: [0, 3]
>[    0.671594] PCI: 0000:00:1f.1 reg 20 io port: [1810, 181f]
>[    0.671602] PCI: 0000:00:1f.1 reg 24 32bit mmio: [0, 3ff]
>[    0.671657] PCI: 0000:00:1f.3 reg 20 io port: [1500, 151f]
>[    0.671705] PCI: 0000:00:1f.5 reg 10 io port: [1c00, 1cff]
>[    0.671713] PCI: 0000:00:1f.5 reg 14 io port: [18c0, 18ff]
>[    0.671721] PCI: 0000:00:1f.5 reg 18 32bit mmio: [e0100c00, e0100dff]
>[    0.671729] PCI: 0000:00:1f.5 reg 1c 32bit mmio: [e0100800, e01008ff]
>[    0.671759] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
>[    0.671831] pci 0000:00:1f.5: PME# disabled
>[    0.671921] PCI: 0000:00:1f.6 reg 10 io port: [2400, 24ff]
>[    0.671929] PCI: 0000:00:1f.6 reg 14 io port: [2000, 207f]
>[    0.671968] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
>[    0.672051] pci 0000:00:1f.6: PME# disabled
>[    0.672155] PCI: 0000:02:00.0 reg 10 32bit mmio: [e0200000, e02007ff]
>[    0.672164] PCI: 0000:02:00.0 reg 14 io port: [3400, 347f]
>[    0.672205] pci 0000:02:00.0: supports D2
>[    0.672208] pci 0000:02:00.0: PME# supported from D2 D3hot D3cold
>[    0.672280] pci 0000:02:00.0: PME# disabled
>[    0.672376] PCI: 0000:02:03.0 reg 10 io port: [3000, 30ff]
>[    0.672384] PCI: 0000:02:03.0 reg 14 32bit mmio: [e0200800, e02008ff]
>[    0.672425] pci 0000:02:03.0: supports D1
>[    0.672427] pci 0000:02:03.0: supports D2
>[    0.672430] pci 0000:02:03.0: PME# supported from D1 D2 D3hot D3cold
>[    0.672502] pci 0000:02:03.0: PME# disabled
>[    0.672594] PCI: 0000:02:04.0 reg 10 32bit mmio: [0, fff]
>[    0.672610] pci 0000:02:04.0: supports D1
>[    0.672612] pci 0000:02:04.0: supports D2
>[    0.672615] pci 0000:02:04.0: PME# supported from D0 D1 D2 D3hot D3cold
>[    0.672688] pci 0000:02:04.0: PME# disabled
>[    0.672780] PCI: 0000:02:04.1 reg 10 32bit mmio: [0, fff]
>[    0.672796] pci 0000:02:04.1: supports D1
>[    0.672798] pci 0000:02:04.1: supports D2
>[    0.672801] pci 0000:02:04.1: PME# supported from D0 D1 D2 D3hot D3cold
>[    0.672874] pci 0000:02:04.1: PME# disabled
>[    0.672979] pci 0000:00:1e.0: transparent bridge
>[    0.673047] PCI: bridge 0000:00:1e.0 io port: [3000, 3fff]
>[    0.673052] PCI: bridge 0000:00:1e.0 32bit mmio: [e0200000, e02fffff]
>[    0.673099] bus 00 -> node 0
>[    0.673111] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>[    0.673507] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
>[    0.683545] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 *11)
>[    0.683936] ACPI: PCI Interrupt Link [LNKB] (IRQs *10 11)
>[    0.684297] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 *11)
>[    0.684672] ACPI: PCI Interrupt Link [LNKD] (IRQs *10 11)
>[    0.685054] ACPI: PCI Interrupt Link [LNKE] (IRQs 11) *0, disabled.
>[    0.685464] ACPI: PCI Interrupt Link [LNKF] (IRQs 11) *0, disabled.
>[    0.685873] ACPI: PCI Interrupt Link [LNKG] (IRQs 11) *0, disabled.
>[    0.686281] ACPI: PCI Interrupt Link [LNKH] (IRQs *10 11)
>[    0.686791] Linux Plug and Play Support v0.97 (c) Adam Belay
>[    0.686928] pnp: PnP ACPI init
>[    0.687002] ACPI: bus type pnp registered
>[    0.751952] pnp: PnP ACPI: found 9 devices
>[    0.752036] ACPI: ACPI bus type pnp unregistered
>[    0.752106] PnPBIOS: Disabled by ACPI PNP
>[    0.752799] PCI: Using ACPI for IRQ routing
>[    0.753060] NET: Registered protocol family 8
>[    0.753060] NET: Registered protocol family 20
>[    0.753060] NetLabel: Initializing
>[    0.753060] NetLabel:  domain hash size = 128
>[    0.753060] NetLabel:  protocols = UNLABELED CIPSOv4
>[    0.753060] NetLabel:  unlabeled traffic allowed by default
>[    0.753060] tracer: 772 pages allocated for 65536 entries of 48 bytes
>[    0.753060]    actual entries 65620
>[    0.753327] AppArmor: AppArmor Filesystem Enabled
>[    0.753414] ACPI: RTC can wake from S4
>[    0.753492] system 00:04: ioport range 0x200-0x20f has been reserved
>[    0.753492] system 00:04: ioport range 0x600-0x60f has been reserved
>[    0.753492] system 00:04: ioport range 0x700-0x70f has been reserved
>[    0.753492] system 00:04: ioport range 0x800-0x80f has been reserved
>[    0.753492] system 00:04: ioport range 0x1000-0x107f has been reserved
>[    0.753492] system 00:04: ioport range 0x1180-0x11bf has been reserved
>[    0.753492] system 00:04: ioport range 0x1200-0x120f has been reserved
>[    0.756044] system 00:04: ioport range 0xfe00-0xfe01 has been reserved
>[    0.756118] system 00:04: iomem range 0xfebffc00-0xfebfffff has been reserved
>[    0.756192] system 00:04: iomem range 0xfff80000-0xffffffff could not be reserved
>[    0.756283] system 00:04: iomem range 0xfabf8000-0xfabf8fdf has been reserved
>[    0.756356] system 00:04: iomem range 0xfabfa000-0xfabfafdf has been reserved
>[    0.791921] pci 0000:02:04.0: CardBus bridge, secondary bus 0000:03
>[    0.791995] pci 0000:02:04.0:   IO window: 0x003800-0x0038ff
>[    0.792066] pci 0000:02:04.0:   IO window: 0x003c00-0x003cff
>[    0.792136] pci 0000:02:04.0:   PREFETCH window: 0x50000000-0x53ffffff
>[    0.792210] pci 0000:02:04.0:   MEM window: 0x5c000000-0x5fffffff
>[    0.792283] pci 0000:02:04.1: CardBus bridge, secondary bus 0000:07
>[    0.792353] pci 0000:02:04.1:   IO window: 0x001400-0x0014ff
>[    0.792422] pci 0000:02:04.1:   IO window: 0x002800-0x0028ff
>[    0.792492] pci 0000:02:04.1:   PREFETCH window: 0x54000000-0x57ffffff
>[    0.792565] pci 0000:02:04.1:   MEM window: 0x60000000-0x63ffffff
>[    0.792636] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
>[    0.792706] pci 0000:00:1e.0:   IO window: 0x3000-0x3fff
>[    0.792777] pci 0000:00:1e.0:   MEM window: 0xe0200000-0xe02fffff
>[    0.792849] pci 0000:00:1e.0:   PREFETCH window: 0x00000050000000-0x00000057ffffff
>[    0.792957] pci 0000:00:1e.0: setting latency timer to 64
>[    0.792976] pci 0000:02:04.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>[    0.793057] pci 0000:02:04.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
>[    0.793130] bus: 00 index 0 io port: [0, ffff]
>[    0.793195] bus: 00 index 1 mmio: [0, ffffffff]
>[    0.793260] bus: 02 index 0 io port: [3000, 3fff]
>[    0.793325] bus: 02 index 1 mmio: [e0200000, e02fffff]
>[    0.793391] bus: 02 index 2 mmio: [50000000, 57ffffff]
>[    0.793456] bus: 02 index 3 io port: [0, ffff]
>[    0.793520] bus: 02 index 4 mmio: [0, ffffffff]
>[    0.793585] bus: 03 index 0 io port: [3800, 38ff]
>[    0.793649] bus: 03 index 1 io port: [3c00, 3cff]
>[    0.793714] bus: 03 index 2 mmio: [50000000, 53ffffff]
>[    0.793780] bus: 03 index 3 mmio: [5c000000, 5fffffff]
>[    0.793846] bus: 07 index 0 io port: [1400, 14ff]
>[    0.793911] bus: 07 index 1 io port: [2800, 28ff]
>[    0.793975] bus: 07 index 2 mmio: [54000000, 57ffffff]
>[    0.794042] bus: 07 index 3 mmio: [60000000, 63ffffff]
>[    0.794123] NET: Registered protocol family 2
>[    0.794410] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>[    0.794980] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>[    0.796374] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>[    0.797167] TCP: Hash tables configured (established 131072 bind 65536)
>[    0.797250] TCP reno registered
>[    0.797558] NET: Registered protocol family 1
>[    0.797816] checking if image is initramfs... it is
>[    1.295895] Switched to high resolution mode on CPU 0
>[    1.695549] Freeing initrd memory: 8004k freed
>[    1.695943] Simple Boot Flag at 0x36 set to 0x1
>[    1.696871] audit: initializing netlink socket (disabled)
>[    1.696970] type=2000 audit(1230581314.696:1): initialized
>[    1.703076] highmem bounce pool size: 64 pages
>[    1.703158] HugeTLB registered 4 MB page size, pre-allocated 0 pages
>[    1.706831] VFS: Disk quotas dquot_6.5.1
>[    1.707055] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>[    1.707299] msgmni has been set to 1762
>[    1.707565] io scheduler noop registered
>[    1.707631] io scheduler anticipatory registered
>[    1.707697] io scheduler deadline registered
>[    1.707778] io scheduler cfq registered (default)
>[    1.707866] pci 0000:00:02.0: Boot video device
>[    1.709000] isapnp: Scanning for PnP cards...
>[    2.062921] isapnp: No Plug & Play device found
>[    2.131841] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
>[    2.133059] serial 0000:00:1f.6: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>[    2.133144] serial 0000:00:1f.6: PCI INT B disabled
>[    2.135941] brd: module loaded
>[    2.136165] input: Macintosh mouse button emulation as /devices/virtual/input/input0
>[    2.136468] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>[    2.146571] i8042.c: Detected active multiplexing controller, rev 1.1.
>[    2.152060] serio: i8042 KBD port at 0x60,0x64 irq 1
>[    2.152134] serio: i8042 AUX0 port at 0x60,0x64 irq 12
>[    2.152203] serio: i8042 AUX1 port at 0x60,0x64 irq 12
>[    2.152269] serio: i8042 AUX2 port at 0x60,0x64 irq 12
>[    2.152335] serio: i8042 AUX3 port at 0x60,0x64 irq 12
>[    2.153271] mice: PS/2 mouse device common for all mice
>[    2.153604] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
>[    2.153698] rtc0: alarms up to one month, y3k
>[    2.153978] EISA: Probing bus 0 at eisa.0
>[    2.154051] Cannot allocate resource for EISA slot 1
>[    2.154118] Cannot allocate resource for EISA slot 2
>[    2.154183] Cannot allocate resource for EISA slot 3
>[    2.154269] EISA: Detected 0 cards.
>[    2.154333] cpuidle: using governor ladder
>[    2.154397] cpuidle: using governor menu
>[    2.155217] TCP cubic registered
>[    2.155335] Using IPI No-Shortcut mode
>[    2.155812] registered taskstats version 1
>[    2.156067]   Magic number: 4:404:145
>[    2.156290] acpi device:16: hash matches
>[    2.156394] rtc_cmos 00:01: setting system clock to 2008-12-29 20:08:36 UTC (1230581316)
>[    2.156487] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
>[    2.156556] EDD information not available.
>[    2.157221] Freeing unused kernel memory: 424k freed
>[    2.157356] Write protecting the kernel text: 2576k
>[    2.157462] Write protecting the kernel read-only data: 936k
>[    2.178725] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
>[    2.394877] fuse init (API version 7.9)
>[    2.432202] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>[    2.432506] processor ACPI0007:00: registered as cooling_device0
>[    2.432580] ACPI: Processor [CPU0] (supports 8 throttling states)
>[    2.448007] Marking TSC unstable due to TSC halts in idle
>[    2.548484] thermal LNXTHERM:01: registered as thermal_zone0
>[    2.772202] ACPI: Thermal Zone [THRM] (63 C)
>[    2.792033] Clocksource tsc unstable (delta = -314145054 ns)
>[    3.390403] ACPI: ACPI Dock Station Driver
>[    3.571798] usbcore: registered new interface driver usbfs
>[    3.571915] usbcore: registered new interface driver hub
>[    3.584340] usbcore: registered new device driver usb
>[    3.644783] SCSI subsystem initialized
>[    3.651088] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
>[    3.651183] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[    3.651189] ehci_hcd 0000:00:1d.7: EHCI Host Controller
>[    3.651328] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>[    3.655327] ehci_hcd 0000:00:1d.7: debug port 1
>[    3.655398] ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported
>[    3.655423] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe0100000
>[    3.662841] USB Universal Host Controller Interface driver v3.0
>[    3.692522] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>[    3.692936] usb usb1: configuration #1 chosen from 1 choice
>[    3.693047] hub 1-0:1.0: USB hub found
>[    3.693128] hub 1-0:1.0: 6 ports detected
>[    3.752694] libata version 3.00 loaded.
>[    3.769585] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
>[    3.900785] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>[    3.900879] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[    3.900884] uhci_hcd 0000:00:1d.0: UHCI Host Controller
>[    3.900998] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>[    3.901130] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001820
>[    3.901366] usb usb2: configuration #1 chosen from 1 choice
>[    3.901477] hub 2-0:1.0: USB hub found
>[    3.901553] hub 2-0:1.0: 2 ports detected
>[    4.012064] usb 1-1: new high speed USB device using ehci_hcd and address 2
>[    4.108972] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>[    4.109061] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[    4.109068] uhci_hcd 0000:00:1d.1: UHCI Host Controller
>[    4.109189] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>[    4.109317] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
>[    4.109621] usb usb3: configuration #1 chosen from 1 choice
>[    4.109732] hub 3-0:1.0: USB hub found
>[    4.109808] hub 3-0:1.0: 2 ports detected
>[    4.316474] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>[    4.316568] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[    4.316574] uhci_hcd 0000:00:1d.2: UHCI Host Controller
>[    4.316687] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>[    4.316819] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
>[    4.317059] usb usb4: configuration #1 chosen from 1 choice
>[    4.317182] hub 4-0:1.0: USB hub found
>[    4.317261] hub 4-0:1.0: 2 ports detected
>[    4.330715] usb 1-1: configuration #1 chosen from 1 choice
>[    4.420597] pata_acpi 0000:00:1f.1: enabling device (0005 -> 0007)
>[    4.420681] pata_acpi 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>[    4.420827] pata_acpi 0000:00:1f.1: setting latency timer to 64
>[    4.420847] pata_acpi 0000:00:1f.1: PCI INT A disabled
>[    4.421041] ohci1394 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>[    4.473935] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[16]  MMIO=[e0200000-e02007ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
>[    4.483466] 8139cp 0000:02:03.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
>[    4.483568] 8139cp 0000:02:03.0: Try the "8139too" driver instead.
>[    4.489963] 8139too Fast Ethernet driver 0.9.28
>[    4.490094] 8139too 0000:02:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
>[    4.490973] eth0: RealTek RTL8139 at 0x3000, 00:02:3f:11:d9:2b, IRQ 19
>[    4.491045] eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
>[    4.501324] ata_piix 0000:00:1f.1: version 2.12
>[    4.501345] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>[    4.501492] ata_piix 0000:00:1f.1: setting latency timer to 64
>[    4.502076] scsi0 : ata_piix
>[    4.503797] scsi1 : ata_piix
>[    4.505725] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
>[    4.505800] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
>[    4.652103] usb 3-1: new low speed USB device using uhci_hcd and address 2
>[    4.668544] ata1.00: ATA-6: ST98823A, 3.04, max UDMA/100
>[    4.668622] ata1.00: 156301488 sectors, multi 16: LBA48 
>[    4.684475] ata1.00: configured for UDMA/100
>[    4.829742] usb 3-1: configuration #1 chosen from 1 choice
>[    4.840526] ata2.00: ATAPI: QSI CD-RW/DVD-ROM SBW-241, VY02, max UDMA/33
>[    4.841124] ata2.00: configured for UDMA/33
>[    4.841384] scsi 0:0:0:0: Direct-Access     ATA      ST98823A         3.04 PQ: 0 ANSI: 5
>[    4.842267] scsi 1:0:0:0: CD-ROM            QSI      CDRW/DVD SBW-241 VY02 PQ: 0 ANSI: 5
>[    5.009214] scsi 0:0:0:0: Attached scsi generic sg0 type 0
>[    5.009343] scsi 1:0:0:0: Attached scsi generic sg1 type 5
>[    5.072311] Driver 'sd' needs updating - please use bus_type methods
>[    5.072604] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
>[    5.072711] sd 0:0:0:0: [sda] Write Protect is off
>[    5.072778] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[    5.072842] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    5.073071] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
>[    5.073172] sd 0:0:0:0: [sda] Write Protect is off
>[    5.073240] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[    5.073297] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    5.073396]  sda: sda1 sda2 <<6>usbcore: registered new interface driver hiddev
>[    5.106602] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input2
>[    5.108765] Driver 'sr' needs updating - please use bus_type methods
>[    5.112401]  sda5 >
>[    5.112782] sd 0:0:0:0: [sda] Attached SCSI disk
>[    5.120370] input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-1
>[    5.122132] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
>[    5.122211] Uniform CD-ROM driver Revision: 3.20
>[    5.122422] sr 1:0:0:0: Attached scsi CD-ROM sr0
>[    5.134757] hiddev96hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.1-1
>[    5.134987] usbcore: registered new interface driver usbhid
>[    5.135065] usbhid: v2.6:USB HID core driver
>[    5.423610] PM: Starting manual resume from disk
>[    5.423680] PM: Resume from partition 8:5
>[    5.423682] PM: Checking hibernation image.
>[    5.423959] PM: Resume from disk failed.
>[    5.458763] EXT3-fs: INFO: recovery required on readonly filesystem.
>[    5.458842] EXT3-fs: write access will be enabled during recovery.
>[    5.752244] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00023f3c36000e97]
>[   11.303514] kjournald starting.  Commit interval 5 seconds
>[   11.303620] EXT3-fs: sda1: orphan cleanup on readonly fs
>[   11.303693] ext3_orphan_cleanup: deleting unreferenced inode 1222050
>[   11.334897] ext3_orphan_cleanup: deleting unreferenced inode 1753233
>[   11.335112] ext3_orphan_cleanup: deleting unreferenced inode 2867206
>[   11.335128] ext3_orphan_cleanup: deleting unreferenced inode 2867205
>[   11.335139] ext3_orphan_cleanup: deleting unreferenced inode 2867204
>[   11.335150] ext3_orphan_cleanup: deleting unreferenced inode 2867203
>[   11.335161] ext3_orphan_cleanup: deleting unreferenced inode 2867202
>[   11.335172] EXT3-fs: sda1: 7 orphan inodes deleted
>[   11.335240] EXT3-fs: recovery complete.
>[   11.392468] EXT3-fs: mounted filesystem with ordered data mode.
>[   20.057792] udevd version 124 started
>[   21.251271] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>[   21.288386] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>[   21.329451] iTCO_vendor_support: vendor-support=0
>[   21.355944] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
>[   21.357383] iTCO_wdt: Found a ICH4-M TCO device (Version=1, TCOBASE=0x1060)
>[   21.357796] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>[   21.405021] Linux agpgart interface v0.103
>[   21.434670] agpgart-intel 0000:00:00.0: Intel 855GM Chipset
>[   21.434886] agpgart-intel 0000:00:00.0: detected 16252K stolen memory
>[   21.453289] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xe8000000
>[   21.547005] intel_rng: FWH not detected
>[   21.918759] input: PC Speaker as /devices/platform/pcspkr/input/input3
>[   22.112234] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
>[   22.124145] ACPI: Power Button (FF) [PWRF]
>[   22.124420] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input5
>[   22.124625] ACPI: Lid Switch [LID]
>[   22.124805] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input6
>[   22.140043] ACPI: Power Button (CM) [PWRB]
>[   23.233837] Yenta: CardBus bridge found at 0000:02:04.0 [14c0:0012]
>[   23.233938] Yenta: Using CSCINT to route CSC interrupts to PCI
>[   23.234006] Yenta: Routing CardBus interrupts to PCI
>[   23.234075] Yenta TI: socket 0000:02:04.0, mfunc 0x011c1122, devctl 0x44
>[   23.442534] input: PS/2 Mouse as /devices/platform/i8042/serio4/input/input7
>[   23.464824] Yenta: ISA IRQ mask 0x0cb8, PCI irq 20
>[   23.464900] Socket status: 30000006
>[   23.464964] Yenta: Raising subordinate bus# of parent bus (#02) from #02 to #06
>[   23.465062] pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
>[   23.465133] cs: IO port probe 0x3000-0x3fff: clean.
>[   23.465549] pcmcia: parent PCI bridge Memory window: 0xe0200000 - 0xe02fffff
>[   23.465621] pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x57ffffff
>[   23.466211] Yenta: CardBus bridge found at 0000:02:04.1 [14c0:0012]
>[   23.466304] Yenta: Using CSCINT to route CSC interrupts to PCI
>[   23.466372] Yenta: Routing CardBus interrupts to PCI
>[   23.466441] Yenta TI: socket 0000:02:04.1, mfunc 0x011c1122, devctl 0x44
>[   23.473470] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio4/input/input8
>[   23.696861] Yenta: ISA IRQ mask 0x0cb8, PCI irq 21
>[   23.696936] Socket status: 30000006
>[   23.697001] Yenta: Raising subordinate bus# of parent bus (#02) from #06 to #0a
>[   23.697098] pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
>[   23.697168] cs: IO port probe 0x3000-0x3fff: clean.
>[   23.697573] pcmcia: parent PCI bridge Memory window: 0xe0200000 - 0xe02fffff
>[   23.697646] pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x57ffffff
>[   23.736327] ACPI: AC Adapter [ACAD] (on-line)
>[   23.914976] acpi device:05: registered as cooling_device1
>[   23.915369] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:02/input/input9
>[   23.924071] ACPI: Video Device [GFX0] (multi-head: yes  rom: yes  post: no)
>[   24.424352] ACPI: Battery Slot [BAT1] (battery present)
>[   24.906504] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>[   24.906630] Intel ICH 0000:00:1f.5: setting latency timer to 64
>[   25.039815] parport_pc 00:08: reported by Plug and Play ACPI
>[   25.039941] parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
>[   25.711704] phy0: Selected rate control algorithm 'pid'
>[   25.732052] intel8x0_measure_ac97_clock: measured 55215 usecs
>[   25.732130] intel8x0: clocking to 48000
>[   25.978759] Registered led device: rt73usb-phy0:radio
>[   25.978858] Registered led device: rt73usb-phy0:assoc
>[   25.978954] Registered led device: rt73usb-phy0:quality
>[   25.979583] usbcore: registered new interface driver rt73usb
>[   28.884775] cs: IO port probe 0x100-0x3af: clean.
>[   28.886641] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
>[   28.887591] cs: IO port probe 0x820-0x8ff: clean.
>[   28.888368] cs: IO port probe 0xc00-0xcf7: clean.
>[   28.889342] cs: IO port probe 0xa00-0xaff: clean.
>[   28.890763] cs: IO port probe 0x100-0x3af: clean.
>[   28.892659] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
>[   28.893610] cs: IO port probe 0x820-0x8ff: clean.
>[   28.894357] cs: IO port probe 0xc00-0xcf7: clean.
>[   28.895330] cs: IO port probe 0xa00-0xaff: clean.
>[   29.924710] lp0: using parport0 (interrupt-driven).
>[   30.164661] Adding 1453840k swap on /dev/sda5.  Priority:-1 extents:1 across:1453840k
>[   30.647091] EXT3 FS on sda1, internal journal
>[   31.476157] type=1505 audit(1230581345.726:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=3995
>[   31.728985] type=1505 audit(1230581345.978:3): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=4000
>[   31.729394] type=1505 audit(1230581345.978:4): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=4000
>[   31.801081] type=1505 audit(1230581346.050:5): operation="profile_load" name="/usr/sbin/mysqld" name2="default" pid=4004
>[   31.969861] ip_tables: (C) 2000-2006 Netfilter Core Team
>[   35.401911] ACPI: WMI: Mapper loaded
>[   37.006700] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
>[   39.641693] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>[   39.641704] apm: overridden by ACPI.
>[   40.126931] ppdev: user-space parallel port driver
>[   47.943582] vboxdrv: Trying to deactivate the NMI watchdog permanently...
>[   47.943608] vboxdrv: Successfully done.
>[   47.943616] vboxdrv: Found 1 processor cores.
>[   47.947171] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
>[   47.947194] vboxdrv: Successfully loaded version 2.0.4_OSE (interface 0x00090000).
>[   48.660974] tun: Universal TUN/TAP device driver, 1.6
>[   48.661000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
>[   56.088291] [drm] Initialized drm 1.1.0 20060810
>[   56.120025] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>[   56.120042] pci 0000:00:02.0: setting latency timer to 64
>[   56.121440] [drm] Initialized i915 1.6.0 20060119 on minor 0
>[   56.121474] pci 0000:00:02.1: setting latency timer to 64
>[   56.124744] [drm] Initialized i915 1.6.0 20060119 on minor 1
>[   56.376592] eth0: link down
>[   56.379342] firmware: requesting rt73.bin
>[   56.734219] NET: Registered protocol family 17
>[  113.536543] wlan0: authenticate with AP 00:1c:df:0f:c8:ba
>[  113.538444] wlan0: authenticated
>[  113.538455] wlan0: associate with AP 00:1c:df:0f:c8:ba
>[  113.541062] wlan0: RX AssocResp from 00:1c:df:0f:c8:ba (capab=0x411 status=0 aid=1)
>[  113.541073] wlan0: associated
>[  114.137144] padlock: VIA PadLock not detected.
>[  193.928587] ppdev0: registered pardevice
>[  193.979758] ppdev0: unregistered pardevice
>[  195.992246] ppdev0: registered pardevice
>[  196.040618] ppdev0: unregistered pardevice
>[  198.156662] ppdev0: registered pardevice
>[  198.204250] ppdev0: unregistered pardevice
>[ 6631.620311] usb 4-1: new full speed USB device using uhci_hcd and address 2
>[ 6631.798915] usb 4-1: configuration #1 chosen from 1 choice
>[ 6632.195258] usbcore: registered new interface driver libusual
>[ 6632.261983] Initializing USB Mass Storage driver...
>[ 6632.266530] scsi2 : SCSI emulation for USB Mass Storage devices
>[ 6632.277884] usbcore: registered new interface driver usb-storage
>[ 6632.278318] USB Mass Storage support registered.
>[ 6632.278834] usb-storage: device found at 2
>[ 6632.278842] usb-storage: waiting for device to settle before scanning
>[ 6637.277431] usb-storage: device scan complete
>[ 6637.284451] scsi 2:0:0:0: Direct-Access     OLYMPUS  FE210/X775       1.00 PQ: 0 ANSI: 0 CCS
>[ 6637.308476] sd 2:0:0:0: [sdb] 2047815 512-byte hardware sectors (1048 MB)
>[ 6637.314803] sd 2:0:0:0: [sdb] Write Protect is off
>[ 6637.314824] sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00
>[ 6637.314834] sd 2:0:0:0: [sdb] Assuming drive cache: write through
>[ 6637.329362] sd 2:0:0:0: [sdb] 2047815 512-byte hardware sectors (1048 MB)
>[ 6637.335493] sd 2:0:0:0: [sdb] Write Protect is off
>[ 6637.335512] sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00
>[ 6637.335520] sd 2:0:0:0: [sdb] Assuming drive cache: write through
>[ 6637.336877]  sdb: sdb1
>[ 6637.345139] sd 2:0:0:0: [sdb] Attached SCSI removable disk
>[ 6637.346002] sd 2:0:0:0: Attached scsi generic sg2 type 0
>[ 7002.448323] usb 4-1: USB disconnect, address 2
>
>
>
>
>----------------
>xrandr --verbose
>----------------
>
>
>
>
>Screen 0: minimum 320 x 200, current 1400 x 1050, maximum 1400 x 1400
>VGA disconnected (normal left inverted right x axis y axis)
>	Identifier: 0x3b
>	Timestamp:  53300
>	Subpixel:   unknown
>	Clones:     TMDS
>	CRTCs:      0 1
>LVDS connected 1400x1050+0+0 (0x3e) normal (normal left inverted right x axis y axis) 0mm x 0mm
>	Identifier: 0x3c
>	Timestamp:  53300
>	Subpixel:   horizontal rgb
>	Clones:    
>	CRTC:       1
>	CRTCs:      1
>	BACKLIGHT_CONTROL: kernel
>		supported: native       legacy       combination  kernel      
>	BACKLIGHT: 5 (0x00000005) range:  (0,5)
>  1400x1050 (0x3e)  108.0MHz *current +preferred
>        h: width  1400 start 1416 end 1528 total 1688 skew    0 clock   64.0KHz
>        v: height 1050 start 1051 end 1054 total 1066           clock   60.0Hz
>  1400x1050 (0x3f)  179.3MHz -HSync +VSync
>        h: width  1400 start 1504 end 1656 total 1912 skew    0 clock   93.8KHz
>        v: height 1050 start 1051 end 1054 total 1103           clock   85.0Hz
>  1400x1050 (0x40)  155.8MHz +HSync +VSync
>        h: width  1400 start 1464 end 1784 total 1912 skew    0 clock   81.5KHz
>        v: height 1050 start 1052 end 1064 total 1090           clock   74.8Hz
>  1400x1050 (0x41)  145.1MHz -HSync +VSync
>        h: width  1400 start 1496 end 1648 total 1896 skew    0 clock   76.5KHz
>        v: height 1050 start 1051 end 1054 total 1093           clock   70.0Hz
>  1400x1050 (0x42)  122.0MHz +HSync +VSync
>        h: width  1400 start 1488 end 1640 total 1880 skew    0 clock   64.9KHz
>        v: height 1050 start 1052 end 1064 total 1082           clock   60.0Hz
>  1280x1024 (0x43)  157.5MHz +HSync +VSync
>        h: width  1280 start 1344 end 1504 total 1728 skew    0 clock   91.1KHz
>        v: height 1024 start 1025 end 1028 total 1072           clock   85.0Hz
>  1280x1024 (0x44)  135.0MHz +HSync +VSync
>        h: width  1280 start 1296 end 1440 total 1688 skew    0 clock   80.0KHz
>        v: height 1024 start 1025 end 1028 total 1066           clock   75.0Hz
>  1280x1024 (0x45)  108.0MHz +HSync +VSync
>        h: width  1280 start 1328 end 1440 total 1688 skew    0 clock   64.0KHz
>        v: height 1024 start 1025 end 1028 total 1066           clock   60.0Hz
>  1280x960 (0x46)  148.5MHz +HSync +VSync
>        h: width  1280 start 1344 end 1504 total 1728 skew    0 clock   85.9KHz
>        v: height  960 start  961 end  964 total 1011           clock   85.0Hz
>  1280x960 (0x47)  108.0MHz +HSync +VSync
>        h: width  1280 start 1376 end 1488 total 1800 skew    0 clock   60.0KHz
>        v: height  960 start  961 end  964 total 1000           clock   60.0Hz
>  1360x768 (0x48)   84.8MHz -HSync +VSync
>        h: width  1360 start 1432 end 1568 total 1776 skew    0 clock   47.7KHz
>        v: height  768 start  771 end  781 total  798           clock   59.8Hz
>  1152x864 (0x49)  143.5MHz -HSync +VSync
>        h: width  1152 start 1232 end 1360 total 1568 skew    0 clock   91.5KHz
>        v: height  864 start  865 end  868 total  915           clock  100.0Hz
>  1152x864 (0x4a)  121.5MHz +HSync -VSync
>        h: width  1152 start 1216 end 1344 total 1568 skew    0 clock   77.5KHz
>        v: height  864 start  865 end  868 total  911           clock   85.1Hz
>  1152x864 (0x4b)  119.7MHz -HSync +VSync
>        h: width  1152 start 1224 end 1352 total 1552 skew    0 clock   77.1KHz
>        v: height  864 start  865 end  868 total  907           clock   85.0Hz
>  1152x864 (0x4c)  108.0MHz +HSync +VSync
>        h: width  1152 start 1216 end 1344 total 1600 skew    0 clock   67.5KHz
>        v: height  864 start  865 end  868 total  900           clock   75.0Hz
>  1152x864 (0x4d)  105.0MHz -HSync +VSync
>        h: width  1152 start 1224 end 1352 total 1552 skew    0 clock   67.6KHz
>        v: height  864 start  865 end  868 total  902           clock   75.0Hz
>  1152x864 (0x4e)   96.8MHz -HSync +VSync
>        h: width  1152 start 1224 end 1344 total 1536 skew    0 clock   63.0KHz
>        v: height  864 start  865 end  868 total  900           clock   70.0Hz
>  1152x864 (0x4f)   81.6MHz -HSync +VSync
>        h: width  1152 start 1216 end 1336 total 1520 skew    0 clock   53.7KHz
>        v: height  864 start  865 end  868 total  895           clock   60.0Hz
>  1024x768 (0x50)   94.5MHz +HSync +VSync
>        h: width  1024 start 1072 end 1168 total 1376 skew    0 clock   68.7KHz
>        v: height  768 start  769 end  772 total  808           clock   85.0Hz
>  1024x768 (0x51)   78.8MHz +HSync +VSync
>        h: width  1024 start 1040 end 1136 total 1312 skew    0 clock   60.0KHz
>        v: height  768 start  769 end  772 total  800           clock   75.0Hz
>  1024x768 (0x52)   75.0MHz -HSync -VSync
>        h: width  1024 start 1048 end 1184 total 1328 skew    0 clock   56.5KHz
>        v: height  768 start  771 end  777 total  806           clock   70.1Hz
>  1024x768 (0x53)   65.0MHz -HSync -VSync
>        h: width  1024 start 1048 end 1184 total 1344 skew    0 clock   48.4KHz
>        v: height  768 start  771 end  777 total  806           clock   60.0Hz
>  832x624 (0x54)   57.3MHz -HSync -VSync
>        h: width   832 start  864 end  928 total 1152 skew    0 clock   49.7KHz
>        v: height  624 start  625 end  628 total  667           clock   74.6Hz
>  800x600 (0x55)   56.3MHz +HSync +VSync
>        h: width   800 start  832 end  896 total 1048 skew    0 clock   53.7KHz
>        v: height  600 start  601 end  604 total  631           clock   85.1Hz
>  800x600 (0x56)   50.0MHz +HSync +VSync
>        h: width   800 start  856 end  976 total 1040 skew    0 clock   48.1KHz
>        v: height  600 start  637 end  643 total  666           clock   72.2Hz
>  800x600 (0x57)   49.5MHz +HSync +VSync
>        h: width   800 start  816 end  896 total 1056 skew    0 clock   46.9KHz
>        v: height  600 start  601 end  604 total  625           clock   75.0Hz
>  800x600 (0x58)   40.0MHz +HSync +VSync
>        h: width   800 start  840 end  968 total 1056 skew    0 clock   37.9KHz
>        v: height  600 start  601 end  605 total  628           clock   60.3Hz
>  800x600 (0x59)   36.0MHz +HSync +VSync
>        h: width   800 start  824 end  896 total 1024 skew    0 clock   35.2KHz
>        v: height  600 start  601 end  603 total  625           clock   56.2Hz
>  640x480 (0x5a)   36.0MHz -HSync -VSync
>        h: width   640 start  696 end  752 total  832 skew    0 clock   43.3KHz
>        v: height  480 start  481 end  484 total  509           clock   85.0Hz
>  640x480 (0x5b)   31.5MHz -HSync -VSync
>        h: width   640 start  664 end  704 total  832 skew    0 clock   37.9KHz
>        v: height  480 start  489 end  492 total  520           clock   72.8Hz
>  640x480 (0x5c)   31.5MHz -HSync -VSync
>        h: width   640 start  656 end  720 total  840 skew    0 clock   37.5KHz
>        v: height  480 start  481 end  484 total  500           clock   75.0Hz
>  640x480 (0x5d)   25.2MHz -HSync -VSync
>        h: width   640 start  656 end  752 total  800 skew    0 clock   31.5KHz
>        v: height  480 start  490 end  492 total  525           clock   59.9Hz
>  720x400 (0x5e)   35.5MHz -HSync +VSync
>        h: width   720 start  756 end  828 total  936 skew    0 clock   37.9KHz
>        v: height  400 start  401 end  404 total  446           clock   85.0Hz
>  640x400 (0x5f)   31.5MHz -HSync +VSync
>        h: width   640 start  672 end  736 total  832 skew    0 clock   37.9KHz
>        v: height  400 start  401 end  404 total  445           clock   85.1Hz
>  640x350 (0x60)   31.5MHz +HSync -VSync
>        h: width   640 start  672 end  736 total  832 skew    0 clock   37.9KHz
>        v: height  350 start  382 end  385 total  445           clock   85.1Hz
>TMDS disconnected (normal left inverted right x axis y axis)
>	Identifier: 0x3d
>	Timestamp:  53300
>	Subpixel:   horizontal rgb
>	Clones:     VGA
>	CRTCs:      0 1

Actions: View

Attachments on bug 19322: 21558

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.