Attachment 23315 Details for Bug 19873 – Dmesg output on 2.6.29-rc6 kernel with UXA (1.5.99.903 xserver, 2.4.5 libdrm, 2.6.2 intel, 7.3 mesa)

Dmesg output on 2.6.29-rc6 kernel with UXA (1.5.99.903 xserver, 2.4.5 libdrm, 2.6.2 intel, 7.3 mesa)

dmesg-slow-2.6.29-UXA (text/plain), 34.50 KB, created by Colin Guthrie on 2009-02-26 01:11:07 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Colin Guthrie

Created: 2009-02-26 01:11:07 UTC

Size: 34.50 KB

patch

obsolete

>Linux version 2.6.29-tmb-desktop-0.rc6.1.2mdv (mandrake@seggie.mandriva.com) (gcc version 4.3.2 (GCC) ) #1 SMP PREEMPT Tue Feb 24 12:05:04 EST 2009
>Command line: BOOT_IMAGE=2.6.29-tmb-desktoprc6-1.2 root=UUID=3efbcd9f-a068-48e0-9238-09d2af09b870 resume2=swap:/dev/vg-primary/lv-swap splash=silent vga=788
>KERNEL supported cpus:
>  Intel GenuineIntel
>  AMD AuthenticAMD
>  Centaur CentaurHauls
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
> BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007f6d3400 (usable)
> BIOS-e820: 000000007f6d3400 - 0000000080000000 (reserved)
> BIOS-e820: 00000000f0000000 - 00000000f4007000 (reserved)
> BIOS-e820: 00000000f4008000 - 00000000f400c000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
> BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
>DMI 2.4 present.
>last_pfn = 0x7f6d3 max_arch_pfn = 0x100000000
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>init_memory_mapping: 0000000000000000-000000007f6d3000
> 0000000000 - 007f600000 page 2M
> 007f600000 - 007f6d3000 page 4k
>kernel direct mapping tables up to 7f6d3000 @ 8000-c000
>last_map_addr: 7f6d3000 end: 7f6d3000
>RAMDISK: 37b90000 - 37fef424
>ACPI: RSDP 000FC1D0, 0014 (r0 DELL  )
>ACPI: RSDT 7F6D39CD, 0040 (r1 DELL    M07     27D7060D ASL        61)
>ACPI: FACP 7F6D4800, 0074 (r1 DELL    M07     27D7060D ASL        61)
>FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4)
>ACPI: DSDT 7F6D5400, 4766 (r1 INT430 SYSFexxx     1001 INTL 20050624)
>ACPI: FACS 7F6E3C00, 0040
>ACPI: HPET 7F6D4F00, 0038 (r1 DELL    M07            1 ASL        61)
>ACPI: APIC 7F6D5000, 0068 (r1 DELL    M07     27D7060D ASL        47)
>ACPI: MCFG 7F6D4FC0, 003E (r16 DELL    M07     27D7060D ASL        61)
>ACPI: SLIC 7F6D509C, 0176 (r1 DELL    M07     27D7060D ASL        61)
>ACPI: BOOT 7F6D4BC0, 0028 (r1 DELL    M07     27D7060D ASL        61)
>ACPI: SSDT 7F6D3A0D, 04DC (r1  PmRef    CpuPm     3000 INTL 20050624)
>ACPI: Local APIC address 0xfee00000
>No NUMA configuration found
>Faking a node at 0000000000000000-000000007f6d3000
>Bootmem setup node 0 0000000000000000-000000007f6d3000
>  NODE_DATA [0000000000001000 - 0000000000005fff]
>  bootmap [000000000000a000 -  0000000000019edf] pages 10
>(6 early reservations) ==> bootmem [0000000000 - 007f6d3000]
>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
>  #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
>  #2 [0000200000 - 0000809e50]    TEXT DATA BSS ==> [0000200000 - 0000809e50]
>  #3 [0037b90000 - 0037fef424]          RAMDISK ==> [0037b90000 - 0037fef424]
>  #4 [000009f000 - 0000100000]    BIOS reserved ==> [000009f000 - 0000100000]
>  #5 [0000008000 - 000000a000]          PGTABLE ==> [0000008000 - 000000a000]
> [ffffe20000000000-ffffe20001bfffff] PMD -> [ffff880001200000-ffff880002dfffff] on node 0
>Zone PFN ranges:
>  DMA      0x00000000 -> 0x00001000
>  DMA32    0x00001000 -> 0x00100000
>  Normal   0x00100000 -> 0x00100000
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0: 0x00000000 -> 0x0000009f
>    0: 0x00000100 -> 0x0007f6d3
>On node 0 totalpages: 521842
>  DMA zone: 56 pages used for memmap
>  DMA zone: 1647 pages reserved
>  DMA zone: 2296 pages, LIFO batch:0
>  DMA32 zone: 7080 pages used for memmap
>  DMA32 zone: 510763 pages, LIFO batch:31
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Using ACPI (MADT) for SMP configuration information
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>SMP: Allowing 2 CPUs, 0 hotplug CPUs
>nr_irqs_gsi: 24
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
>Allocating PCI resources starting at 88000000 (gap: 80000000:70000000)
>NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:2 nr_node_ids:1
>PERCPU: Allocating 53248 bytes of per cpu data
>Built 1 zonelists in Node order, mobility grouping on.  Total pages: 513059
>Policy zone: DMA32
>Kernel command line: BOOT_IMAGE=2.6.29-tmb-desktoprc6-1.2 root=UUID=3efbcd9f-a068-48e0-9238-09d2af09b870 resume2=swap:/dev/vg-primary/lv-swap splash=silent vga=788
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>TSC: PIT calibration matches PMTIMER. 2 loops
>Detected 1995.011 MHz processor.
>Console: colour dummy device 80x25
>console [tty0] enabled
>Checking aperture...
>No AGP bridge found
>Calgary: detecting Calgary via BIOS EBDA area
>Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>Memory: 2047756k/2087756k available (3185k kernel code, 388k absent, 39612k reserved, 1696k data, 536k init)
>SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
>hpet clockevent registered
>HPET: 3 timers in total, 0 timers will be used for per-cpu timer
>Calibrating delay loop (skipped), value calculated using timer frequency.. 3990.02 BogoMIPS (lpj=1995011)
>Security Framework initialized
>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Mount-cache hash table entries: 256
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>[ds] using Core 2/Atom configuration
>CPU 0/0x0 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU0: Thermal monitoring enabled (TM2)
>using mwait in idle threads.
>ACPI: Core revision 20081204
>ACPI: Checking initramfs for custom DSDT
>Setting APIC routing to flat
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>CPU0: Intel(R) Core(TM)2 CPU         T7200  @ 2.00GHz stepping 06
>Booting processor 1 APIC 0x1 ip 0x6000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 3989.21 BogoMIPS (lpj=1994605)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>[ds] using Core 2/Atom configuration
>CPU 1/0x1 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU1: Thermal monitoring enabled (TM2)
>x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
>CPU1: Intel(R) Core(TM)2 CPU         T7200  @ 2.00GHz stepping 06
>checking TSC synchronization [CPU#0 -> CPU#1]:
>Measured 4050404232 cycles TSC warp between CPUs, turning off TSC clock.
>Marking TSC unstable due to check_tsc_sync_source failed
>Brought up 2 CPUs
>Total of 2 processors activated (7979.23 BogoMIPS).
>CPU0 attaching sched-domain:
> domain 0: span 0-1 level MC
>  groups: 0 1
>CPU1 attaching sched-domain:
> domain 0: span 0-1 level MC
>  groups: 1 0
>net_namespace: 1840 bytes
>Booting paravirtualized kernel on bare hardware
>regulator: core version 0.5
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
>PCI: MCFG area at f0000000 reserved in E820
>PCI: Using MMCONFIG at f0000000 - f3ffffff
>PCI: Using configuration type 1 for base access
>bio: create slab <bio-0> at 0
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: No dock devices found.
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci 0000:00:02.0: reg 10 32bit mmio: [0xeff00000-0xeff7ffff]
>pci 0000:00:02.0: reg 14 io port: [0xeff8-0xefff]
>pci 0000:00:02.0: reg 18 32bit mmio: [0xd0000000-0xdfffffff]
>pci 0000:00:02.0: reg 1c 32bit mmio: [0xefec0000-0xefefffff]
>pci 0000:00:02.1: reg 10 32bit mmio: [0xeff80000-0xefffffff]
>pci 0000:00:1b.0: reg 10 64bit mmio: [0xefebc000-0xefebffff]
>pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1b.0: PME# disabled
>pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.0: PME# disabled
>pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.3: PME# disabled
>pci 0000:00:1d.0: reg 20 io port: [0xbf80-0xbf9f]
>pci 0000:00:1d.1: reg 20 io port: [0xbf60-0xbf7f]
>pci 0000:00:1d.2: reg 20 io port: [0xbf40-0xbf5f]
>pci 0000:00:1d.3: reg 20 io port: [0xbf20-0xbf3f]
>pci 0000:00:1d.7: reg 10 32bit mmio: [0xffa80000-0xffa803ff]
>pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1d.7: PME# disabled
>pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
>pci 0000:00:1f.0: quirk: region 1080-10bf claimed by ICH6 GPIO
>pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0900 (mask 007f)
>pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0c80 (mask 003f)
>pci 0000:00:1f.2: reg 10 io port: [0x1f0-0x1f7]
>pci 0000:00:1f.2: reg 14 io port: [0x3f4-0x3f7]
>pci 0000:00:1f.2: reg 18 io port: [0x170-0x177]
>pci 0000:00:1f.2: reg 1c io port: [0x374-0x377]
>pci 0000:00:1f.2: reg 20 io port: [0xbfa0-0xbfaf]
>pci 0000:00:1f.2: PME# supported from D3hot
>pci 0000:00:1f.2: PME# disabled
>pci 0000:00:1f.3: reg 20 io port: [0x10c0-0x10df]
>pci 0000:0b:00.0: reg 10 32bit mmio: [0xefdff000-0xefdfffff]
>pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold
>pci 0000:0b:00.0: PME# disabled
>pci 0000:0b:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
>pci 0000:00:1c.0: bridge 32bit mmio: [0xefd00000-0xefdfffff]
>pci 0000:00:1c.3: bridge io port: [0xd000-0xdfff]
>pci 0000:00:1c.3: bridge 32bit mmio: [0xefa00000-0xefcfffff]
>pci 0000:00:1c.3: bridge 64bit mmio pref: [0xe0000000-0xe01fffff]
>pci 0000:03:00.0: reg 10 32bit mmio: [0xef9fe000-0xef9fffff]
>pci 0000:03:00.0: supports D1 D2
>pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:03:00.0: PME# disabled
>pci 0000:03:01.0: reg 10 32bit mmio: [0xef9fd800-0xef9fdfff]
>pci 0000:03:01.0: supports D1 D2
>pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:03:01.0: PME# disabled
>pci 0000:03:01.1: reg 10 32bit mmio: [0xef9fd400-0xef9fd4ff]
>pci 0000:03:01.1: supports D1 D2
>pci 0000:03:01.1: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:03:01.1: PME# disabled
>pci 0000:03:01.2: reg 10 32bit mmio: [0xef9fd500-0xef9fd5ff]
>pci 0000:03:01.2: supports D1 D2
>pci 0000:03:01.2: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:03:01.2: PME# disabled
>pci 0000:03:01.3: reg 10 32bit mmio: [0xef9fd600-0xef9fd6ff]
>pci 0000:03:01.3: supports D1 D2
>pci 0000:03:01.3: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:03:01.3: PME# disabled
>pci 0000:03:01.4: reg 10 32bit mmio: [0xef9fd700-0xef9fd7ff]
>pci 0000:03:01.4: supports D1 D2
>pci 0000:03:01.4: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:03:01.4: PME# disabled
>pci 0000:00:1e.0: transparent bridge
>pci 0000:00:1e.0: bridge 32bit mmio: [0xef900000-0xef9fffff]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *4
>ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 *11)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 11) *3
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
>PCI: Using ACPI for IRQ routing
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 comparators, 64-bit 14.318180 MHz counter
>Switched to high resolution mode on CPU 0
>Switched to high resolution mode on CPU 1
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp 00:02: io resource (0x1000-0x1005) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
>pnp 00:02: io resource (0x1008-0x100f) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
>pnp 00:03: io resource (0x1006-0x1007) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
>pnp 00:03: io resource (0x100a-0x1059) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
>pnp 00:03: io resource (0x1060-0x107f) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
>pnp 00:03: io resource (0x1010-0x102f) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
>pnp: PnP ACPI: found 12 devices
>ACPI: ACPI bus type pnp unregistered
>system 00:00: iomem range 0x0-0x9fbff could not be reserved
>system 00:00: iomem range 0x9fc00-0x9ffff could not be reserved
>system 00:00: iomem range 0xc0000-0xcffff has been reserved
>system 00:00: iomem range 0xe0000-0xfffff has been reserved
>system 00:00: iomem range 0x100000-0x7f6d33ff could not be reserved
>system 00:00: iomem range 0x7f6d3400-0x7f6fffff has been reserved
>system 00:00: iomem range 0x7f700000-0x7f7fffff has been reserved
>system 00:00: iomem range 0x7f700000-0x7fefffff could not be reserved
>system 00:00: iomem range 0xffb00000-0xffffffff has been reserved
>system 00:00: iomem range 0xfec00000-0xfec0ffff has been reserved
>system 00:00: iomem range 0xfee00000-0xfee0ffff has been reserved
>system 00:00: iomem range 0xfed20000-0xfed9ffff has been reserved
>system 00:00: iomem range 0xffa80000-0xffa83fff could not be reserved
>system 00:00: iomem range 0xf4000000-0xf4003fff has been reserved
>system 00:00: iomem range 0xf4004000-0xf4004fff has been reserved
>system 00:00: iomem range 0xf4005000-0xf4005fff has been reserved
>system 00:00: iomem range 0xf4006000-0xf4006fff has been reserved
>system 00:00: iomem range 0xf4008000-0xf400bfff has been reserved
>system 00:00: iomem range 0xf0000000-0xf3ffffff has been reserved
>system 00:02: ioport range 0x4d0-0x4d1 has been reserved
>system 00:03: ioport range 0xf400-0xf4fe has been reserved
>system 00:03: ioport range 0x1080-0x10bf has been reserved
>system 00:03: ioport range 0x10c0-0x10df has been reserved
>system 00:03: ioport range 0x809-0x809 has been reserved
>system 00:08: ioport range 0xc80-0xcff could not be reserved
>system 00:08: ioport range 0x910-0x91f has been reserved
>system 00:08: ioport range 0x920-0x92f has been reserved
>system 00:08: ioport range 0xcb0-0xcbf has been reserved
>system 00:08: ioport range 0x930-0x97f has been reserved
>system 00:0b: iomem range 0xfed00000-0xfed003ff has been reserved
>pci 0000:00:1c.0: PCI bridge, secondary bus 0000:0b
>pci 0000:00:1c.0:   IO window: disabled
>pci 0000:00:1c.0:   MEM window: 0xefd00000-0xefdfffff
>pci 0000:00:1c.0:   PREFETCH window: disabled
>pci 0000:00:1c.3: PCI bridge, secondary bus 0000:0c
>pci 0000:00:1c.3:   IO window: 0xd000-0xdfff
>pci 0000:00:1c.3:   MEM window: 0xefa00000-0xefcfffff
>pci 0000:00:1c.3:   PREFETCH window: 0x000000e0000000-0x000000e01fffff
>pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
>pci 0000:00:1e.0:   IO window: disabled
>pci 0000:00:1e.0:   MEM window: 0xef900000-0xef9fffff
>pci 0000:00:1e.0:   PREFETCH window: disabled
>pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:1c.0: setting latency timer to 64
>pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
>pci 0000:00:1c.3: setting latency timer to 64
>pci 0000:00:1e.0: setting latency timer to 64
>pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
>pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
>pci_bus 0000:0b: resource 0 mem: [0x0-0x0]
>pci_bus 0000:0b: resource 1 mem: [0xefd00000-0xefdfffff]
>pci_bus 0000:0b: resource 2 mem: [0x0-0x0]
>pci_bus 0000:0b: resource 3 mem: [0x0-0x0]
>pci_bus 0000:0c: resource 0 io:  [0xd000-0xdfff]
>pci_bus 0000:0c: resource 1 mem: [0xefa00000-0xefcfffff]
>pci_bus 0000:0c: resource 2 mem: [0xe0000000-0xe01fffff]
>pci_bus 0000:0c: resource 3 mem: [0x0-0x0]
>pci_bus 0000:03: resource 0 mem: [0x0-0x0]
>pci_bus 0000:03: resource 1 mem: [0xef900000-0xef9fffff]
>pci_bus 0000:03: resource 2 mem: [0x0-0x0]
>pci_bus 0000:03: resource 3 io:  [0x00-0xffff]
>pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffffffffffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
>TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 262144 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>checking if image is initramfs... it is
>Clocksource tsc unstable (delta = 2030263626 ns)
>Freeing initrd memory: 4477k freed
>Simple Boot Flag at 0x79 set to 0x1
>audit: initializing netlink socket (disabled)
>type=2000 audit(1235595755.816:1): initialized
>HugeTLB registered 2 MB page size, pre-allocated 0 pages
>VFS: Disk quotas dquot_6.5.2
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>msgmni has been set to 4008
>alg: No test for stdrng (krng)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci 0000:00:02.0: Boot video device
>pcieport-driver 0000:00:1c.0: setting latency timer to 64
>pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
>pcieport-driver 0000:00:1c.3: setting latency timer to 64
>pcieport-driver 0000:00:1c.3: irq 25 for MSI/MSI-X
>vesafb: framebuffer at 0xd0000000, mapped to 0xffffc20004980000, using 1875k, total 7872k
>vesafb: mode is 800x600x16, linelength=1600, pages=7
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>Console: switching to colour frame buffer device 100x37
>fb0: VESA VGA frame buffer device
>Linux agpgart interface v0.103
>agpgart-intel 0000:00:00.0: Intel 945GM Chipset
>agpgart-intel 0000:00:00.0: detected 7932K stolen memory
>agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
>Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>brd: module loaded
>input: Macintosh mouse button emulation as /class/input/input0
>Uniform Multi-Platform E-IDE driver
>PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>cpuidle: using governor ladder
>cpuidle: using governor menu
>TCP cubic registered
>input: AT Translated Set 2 keyboard as /class/input/input1
>registered taskstats version 1
>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
>Freeing unused kernel memory: 536k freed
>SCSI subsystem initialized
>Driver 'sd' needs updating - please use bus_type methods
>libata version 3.00 loaded.
>ata_piix 0000:00:1f.2: version 2.12
>ata_piix 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
>ata_piix 0000:00:1f.2: setting latency timer to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xbfa0 irq 14
>ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xbfa8 irq 15
>Synaptics Touchpad, model: 1, fw: 6.2, id: 0x180b1, caps: 0xa04713/0x200000
>ata1.00: ATA-7: ST9160823AS, 3.AAB, max UDMA/133
>ata1.00: 312581808 sectors, multi 8: LBA48 NCQ (depth 0/32)
>ata1.00: configured for UDMA/133
>isa bounce pool size: 16 pages
>scsi 0:0:0:0: Direct-Access     ATA      ST9160823AS      3.AA PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2
>sd 0:0:0:0: [sda] Attached SCSI disk
>input: SynPS/2 Synaptics TouchPad as /class/input/input2
>ata2.00: ATAPI: PHILIPS DVD+/-RW SDVD8820, AD15, max UDMA/33
>ata2.00: configured for UDMA/33
>scsi 1:0:0:0: CD-ROM            PHILIPS  DVD+-RW SDVD8820 AD15 PQ: 0 ANSI: 5
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
>ohci1394 0000:03:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19]  MMIO=[ef9fd800-ef9fdfff]  Max Packet=[2048]  IR/IT contexts=[4/4]
>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[334fc0001e64c450]
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>ACPI: WMI: Mapper loaded
>ACPI: SSDT 7F6D4134, 0244 (r1  PmRef  Cpu0Ist     3000 INTL 20050624)
>ACPI: SSDT 7F6D3EE9, 01C6 (r1  PmRef  Cpu0Cst     3001 INTL 20050624)
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>processor ACPI_CPU:00: registered as cooling_device0
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI: SSDT 7F6D4378, 00C4 (r1  PmRef  Cpu1Ist     3000 INTL 20050624)
>ACPI: SSDT 7F6D40AF, 0085 (r1  PmRef  Cpu1Cst     3000 INTL 20050624)
>ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
>processor ACPI_CPU:01: registered as cooling_device1
>ACPI: Processor [CPU1] (supports 8 throttling states)
>ACPI: AC Adapter [AC] (on-line)
>input: Lid Switch as /class/input/input3
>ACPI: Lid Switch [LID]
>input: Power Button (CM) as /class/input/input4
>ACPI: Power Button (CM) [PBTN]
>input: Sleep Button (CM) as /class/input/input5
>ACPI: Sleep Button (CM) [SBTN]
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>scsi 1:0:0:0: Attached scsi generic sg1 type 5
>Driver 'sr' needs updating - please use bus_type methods
>sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>ACPI: Battery Slot [BAT0] (battery present)
>thermal LNXTHERM:01: registered as thermal_zone0
>ACPI: Thermal Zone [THM] (51 C)
>rtc_cmos 00:06: RTC can wake from S4
>rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
>uhci_hcd: USB Universal Host Controller Interface driver
>uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>uhci_hcd 0000:00:1d.0: setting latency timer to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000bf80
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: UHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.29-tmb-desktop-0.rc6.1.2mdv uhci_hcd
>usb usb1: SerialNumber: 0000:00:1d.0
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
>uhci_hcd 0000:00:1d.1: setting latency timer to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.1: irq 21, io base 0x0000bf60
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: UHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.29-tmb-desktop-0.rc6.1.2mdv uhci_hcd
>usb usb2: SerialNumber: 0000:00:1d.1
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
>uhci_hcd 0000:00:1d.2: setting latency timer to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.2: irq 22, io base 0x0000bf40
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.29-tmb-desktop-0.rc6.1.2mdv uhci_hcd
>usb usb3: SerialNumber: 0000:00:1d.2
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
>uhci_hcd 0000:00:1d.3: setting latency timer to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.3: irq 23, io base 0x0000bf20
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.29-tmb-desktop-0.rc6.1.2mdv uhci_hcd
>usb usb4: SerialNumber: 0000:00:1d.3
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
>ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>ehci_hcd 0000:00:1d.7: setting latency timer to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
>ehci_hcd 0000:00:1d.7: debug port 1
>ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
>ehci_hcd 0000:00:1d.7: irq 20, io mem 0xffa80000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
>usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: EHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.29-tmb-desktop-0.rc6.1.2mdv ehci_hcd
>usb usb5: SerialNumber: 0000:00:1d.7
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 8 ports detected
>ricoh-mmc: Ricoh MMC Controller disabling driver
>ricoh-mmc: Copyright(c) Philip Langdale
>ricoh-mmc: Ricoh MMC controller found at 0000:03:01.2 [1180:0843] (rev 1)
>ricoh-mmc: Controller is now disabled.
>dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
>acpi device:2a: registered as cooling_device2
>input: Video Bus as /class/input/input6
>ACPI: Video Device [VID1] (multi-head: yes  rom: no  post: no)
>ACPI Warning (nspredef-0434): \_SB_.PCI0.VID2._DOD: Return Package has no elements (empty) [20081204]
>input: Video Bus as /class/input/input7
>ACPI: Video Device [VID2] (multi-head: yes  rom: no  post: no)
>cfg80211: Using static regulatory domain info
>cfg80211: Regulatory domain: US
>	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>	(2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
>	(5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
>	(5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
>	(5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
>	(5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
>	(5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
>cfg80211: Calling CRDA for country: US
>iTCO_vendor_support: vendor-support=0
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
>iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x1060)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=1)
>b44 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>lib80211: common routines for IEEE802.11 drivers
>lib80211_crypt: registered algorithm 'NULL'
>ssb: Sonics Silicon Backplane found on PCI device 0000:03:00.0
>b44.c:v2.0
>eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:15:c5:bd:76:2d
>usb 4-2: new full speed USB device using uhci_hcd and address 2
>intel_rng: FWH not detected
>usb 4-2: New USB device found, idVendor=413c, idProduct=8126
>usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 4-2: Product: BCM2045
>usb 4-2: Manufacturer: Broadcom Corp
>usb 4-2: configuration #1 chosen from 1 choice
>iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks
>iwl3945: Copyright(c) 2003-2008 Intel Corporation
>iwl3945 0000:0b:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>iwl3945 0000:0b:00.0: setting latency timer to 64
>iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels
>iwl3945: Detected Intel Wireless WiFi Link 3945ABG
>iwl3945 0000:0b:00.0: PCI INT A disabled
>wmaster0 (iwl3945): not using net_device_ops yet
>phy0: Selected rate control algorithm 'iwl-3945-rs'
>cfg80211: Regulatory domain changed to country: US
>	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>	(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>	(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>	(5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>	(5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>	(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>Bluetooth: Core ver 2.14
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>sdhci: Secure Digital Host Controller Interface driver
>sdhci: Copyright(c) Pierre Ossman
>Bluetooth: Generic Bluetooth USB driver ver 0.4
>usbcore: registered new interface driver btusb
>wlan0 (iwl3945): not using net_device_ops yet
>i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>sdhci-pci 0000:03:01.1: SDHCI controller found [1180:0822] (rev 19)
>sdhci-pci 0000:03:01.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
>Registered led device: mmc0::
>mmc0: SDHCI controller on PCI [0000:03:01.1] using DMA
>HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
>HDA Intel 0000:00:1b.0: setting latency timer to 64
>input: HDA Intel at 0xefebc000 irq 21 Mic at Ext Right Jack as /class/input/input8
>input: HDA Intel at 0xefebc000 irq 21 HP Out at Ext Right Jack as /class/input/input9
>Non-volatile memory driver v1.3
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>loop: module loaded
>Adding 3145720k swap on /dev/mapper/vg--primary-lv--swap.  Priority:-1 extents:1 across:3145720k 
>Bluetooth: L2CAP ver 2.11
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: HIDP (Human Interface Emulation) ver 1.2
>intel_rng: FWH not detected
>vboxdrv: Trying to deactivate the NMI watchdog permanently...
>vboxdrv: Successfully done.
>vboxdrv: Found 2 processor cores.
>VBoxDrv: dbg - g_abExecMemory=ffffffffa03bab20
>vboxdrv: fAsync=1 offMin=0xf16beed4 offMax=0xf16beed4
>vboxdrv: TSC mode is 'asynchronous', kernel timer mode is 'normal'.
>vboxdrv: Successfully loaded version 2.1.4_OSE (interface 0x000a0009).
>VBoxNetFlt: dbg - g_abExecMemory=ffffffffa05579e0
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>CE: hpet increasing min_delta_ns to 15000 nsec
>iwl3945 0000:0b:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>iwl3945 0000:0b:00.0: restoring config space at offset 0x1 (was 0x100102, writing 0x100106)
>iwl3945 0000:0b:00.0: irq 26 for MSI/MSI-X
>iwl3945 0000:0b:00.0: firmware: requesting iwlwifi-3945-2.ucode
>iwl3945 loaded firmware version 15.28.2.8
>Registered led device: iwl-phy0:radio
>Registered led device: iwl-phy0:assoc
>Registered led device: iwl-phy0:RX
>Registered led device: iwl-phy0:TX
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>NET: Registered protocol family 17
>wlan0: authenticate with AP 00:18:4d:b5:7e:76
>wlan0: authenticated
>wlan0: associate with AP 00:18:4d:b5:7e:76
>wlan0: RX AssocResp from 00:18:4d:b5:7e:76 (capab=0x431 status=0 aid=1)
>wlan0: associated
>ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[drm] Initialized drm 1.1.0 20060810
>pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:02.0: setting latency timer to 64
>[drm] Initialized i915 1.6.0 20080730 on minor 0
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>X:7337 conflicting memory types d0000000-e0000000 write-combining<->uncached-minus
>reserve_memtype failed 0xd0000000-0xe0000000, track write-combining, req write-combining
>X:7337 conflicting memory types d0000000-e0000000 write-combining<->uncached-minus
>reserve_memtype failed 0xd0000000-0xe0000000, track write-combining, req write-combining
>X:7337 conflicting memory types d0000000-e0000000 write-combining<->uncached-minus
>reserve_memtype failed 0xd0000000-0xe0000000, track write-combining, req write-combining
>X:7337 conflicting memory types d0000000-e0000000 write-combining<->uncached-minus
>reserve_memtype failed 0xd0000000-0xe0000000, track write-combining, req write-combining
>X:8076 freeing invalid memtype d0000000-e0000000
>X:7337 conflicting memory types d0000000-e0000000 write-combining<->uncached-minus
>reserve_memtype failed 0xd0000000-0xe0000000, track write-combining, req write-combining
>X:8077 freeing invalid memtype d0000000-e0000000
>X:7337 conflicting memory types d0000000-e0000000 write-combining<->uncached-minus
>reserve_memtype failed 0xd0000000-0xe0000000, track write-combining, req write-combining
>X:8078 freeing invalid memtype d0000000-e0000000
>wlan0: no IPv6 routers present
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
>nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
>sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
>ctnetlink v0.93: registering with nfnetlink.
>ClusterIP Version 0.8 loaded successfully
>xt_time: kernel timezone is -0000
>netfilter PSD loaded - (c) astaro AG
>IFWLOG: register target
>[drm:i915_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0
>[drm:i915_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0
>X:7337 freeing invalid memtype d0000000-e0000000
>X:7337 freeing invalid memtype d0000000-e0000000
>X:12354 conflicting memory types d0000000-e0000000 write-combining<->uncached-minus
>reserve_memtype failed 0xd0000000-0xe0000000, track write-combining, req write-combining
>X:12354 conflicting memory types d0000000-e0000000 write-combining<->uncached-minus
>reserve_memtype failed 0xd0000000-0xe0000000, track write-combining, req write-combining
>X:12354 conflicting memory types d0000000-e0000000 write-combining<->uncached-minus
>reserve_memtype failed 0xd0000000-0xe0000000, track write-combining, req write-combining
>X:12370 freeing invalid memtype d0000000-e0000000
>X:12354 conflicting memory types d0000000-e0000000 write-combining<->uncached-minus
>reserve_memtype failed 0xd0000000-0xe0000000, track write-combining, req write-combining
>X:12371 freeing invalid memtype d0000000-e0000000
>X:12354 conflicting memory types d0000000-e0000000 write-combining<->uncached-minus
>reserve_memtype failed 0xd0000000-0xe0000000, track write-combining, req write-combining
>X:12372 freeing invalid memtype d0000000-e0000000
>X:12354 conflicting memory types d0000000-e0000000 write-combining<->uncached-minus
>reserve_memtype failed 0xd0000000-0xe0000000, track write-combining, req write-combining
>X:12373 freeing invalid memtype d0000000-e0000000
>[drm:i915_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0

Actions: View

Attachments on bug 19873: 22432 | 22433 | 22434 | 23311 | 23312 | 23313 | 23314 | 23315 | 23316 | 23867 | 23936 | 24000 | 24001

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.