Attachment 23582 Details for Bug 20466 – dmesg output

dmesg output

dmesg.log (text/plain), 27.22 KB, created by Chris Bannister on 2009-03-06 02:47:50 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Chris Bannister

Created: 2009-03-06 02:47:50 UTC

Size: 27.22 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Linux version 2.6.29-rc6-zen1 (root@Jotun) (gcc version 4.3.3 (GCC) ) #56 SMP PREEMPT Wed Feb 25 08:29:02 GMT 2009
>KERNEL supported cpus:
>  AMD AuthenticAMD
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003fee0000 (usable)
> BIOS-e820: 000000003fee0000 - 000000003fee3000 (ACPI NVS)
> BIOS-e820: 000000003fee3000 - 000000003fef0000 (ACPI data)
> BIOS-e820: 000000003fef0000 - 000000003ff00000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
>DMI 2.2 present.
>Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
>last_pfn = 0x3fee0 max_arch_pfn = 0x100000
>kernel direct mapping tables up to 377fe000 @ 10000-15000
>ACPI: RSDP 000F7810, 0014 (r0 Nvidia)
>ACPI: RSDT 3FEE3040, 0034 (r1 Nvidia AWRDACPI 42302E31 AWRD        0)
>ACPI: FACP 3FEE30C0, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD        0)
>FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4)
>ACPI: DSDT 3FEE3180, 6786 (r1 NVIDIA AWRDACPI     1000 MSFT  100000E)
>ACPI: FACS 3FEE0000, 0040
>ACPI: SSDT 3FEE9A40, 00D6 (r1 PTLTD  POWERNOW        1  LTP        1)
>ACPI: MCFG 3FEE9B80, 003C (r1 Nvidia AWRDACPI 42302E31 AWRD        0)
>ACPI: APIC 3FEE9980, 007C (r1 Nvidia AWRDACPI 42302E31 AWRD        0)
>ACPI: Local APIC address 0xfee00000
>134MB HIGHMEM available.
>887MB LOWMEM available.
>  mapped low ram: 0 - 377fe000
>  low ram: 00000000 - 377fe000
>  bootmap 00011000 - 00017f00
>(8 early reservations) ==> bootmem [0000000000 - 00377fe000]
>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
>  #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
>  #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
>  #3 [0000100000 - 0000583868]    TEXT DATA BSS ==> [0000100000 - 0000583868]
>  #4 [0000584000 - 0000587000]    INIT_PG_TABLE ==> [0000584000 - 0000587000]
>  #5 [000009f800 - 0000100000]    BIOS reserved ==> [000009f800 - 0000100000]
>  #6 [0000010000 - 0000011000]          PGTABLE ==> [0000010000 - 0000011000]
>  #7 [0000011000 - 0000018000]          BOOTMAP ==> [0000011000 - 0000018000]
>found SMP MP-table at [c00f3900] 000f3900
>Zone PFN ranges:
>  DMA      0x00000010 -> 0x00001000
>  Normal   0x00001000 -> 0x000377fe
>  HighMem  0x000377fe -> 0x0003fee0
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0: 0x00000010 -> 0x0000009f
>    0: 0x00000100 -> 0x0003fee0
>On node 0 totalpages: 261743
>free_area_init_node: node 0, pgdat c04c3300, node_mem_map c1000200
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 3951 pages, LIFO batch:0
>  Normal zone: 1744 pages used for memmap
>  Normal zone: 221486 pages, LIFO batch:31
>  HighMem zone: 270 pages used for memmap
>  HighMem zone: 34260 pages, LIFO batch:7
>Nvidia board detected. Ignoring ACPI timer override.
>If you got timer trouble try acpi_use_timer_override
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: BIOS IRQ0 pin2 override ignored.
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
>ACPI: IRQ9 used by override.
>ACPI: IRQ14 used by override.
>ACPI: IRQ15 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>SMP: Allowing 2 CPUs, 1 hotplug CPUs
>nr_irqs_gsi: 24
>Allocating PCI resources starting at 40000000 (gap: 3ff00000:a0100000)
>NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
>PERCPU: Allocating 36864 bytes of per cpu data
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 259697
>Kernel command line: root=/dev/sda6 ro vga=795 nouveau.modeset=1
>Unknown boot option `nouveau.modeset=1': ignoring
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c0538000 soft=c0530000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Fast TSC calibration using PIT
>Detected 2009.278 MHz processor.
>spurious 8259A interrupt: IRQ7.
>Console: colour dummy device 80x25
>console [tty0] enabled
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 1032940k/1047424k available (2813k kernel code, 13736k reserved, 1150k data, 288k init, 138120k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xfff51000 - 0xfffff000   ( 696 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
>    lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
>      .init : 0xc04e5000 - 0xc052d000   ( 288 kB)
>      .data : 0xc03bf6f6 - 0xc04df208   (1150 kB)
>      .text : 0xc0100000 - 0xc03bf6f6   (2813 kB)
>Checking if this processor honours the WP bit even in supervisor mode...Ok.
>SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
>Calibrating delay loop (skipped), value calculated using timer frequency.. 4018.55 BogoMIPS (lpj=2009278)
>Security Framework initialized
>Mount-cache hash table entries: 512
>Initializing cgroup subsys ns
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>ACPI: Core revision 20081204
>..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
>CPU0: AMD Athlon(tm) 64 Processor 3200+ stepping 02
>Brought up 1 CPUs
>Total of 1 processors activated (4018.55 BogoMIPS).
>net_namespace: 764 bytes
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
>PCI: MCFG area at e0000000 reserved in E820
>PCI: Using MMCONFIG for extended config space
>PCI: Using configuration type 1 for base access
>bio: create slab <bio-0> at 0
>ACPI: EC: Look up EC in DSDT
>ACPI: Denied BIOS AML access to invalid port 0x4d0+0x2 (ELCR)
>ACPI Exception (dsopcode-0419): AE_AML_ILLEGAL_ADDRESS, During address validation of OpRegion [ELCR] [20081204]
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: No dock devices found.
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>HPET not enabled in BIOS. You might try hpet=force boot option
>pci 0000:00:01.1: reg 10 io port: [0xfc00-0xfc1f]
>pci 0000:00:01.1: reg 20 io port: [0x1c00-0x1c3f]
>pci 0000:00:01.1: reg 24 io port: [0x1c40-0x1c7f]
>pci 0000:00:01.1: PME# supported from D3hot D3cold
>pci 0000:00:01.1: PME# disabled
>pci 0000:00:02.0: reg 10 32bit mmio: [0xfe02f000-0xfe02ffff]
>pci 0000:00:02.0: supports D1 D2
>pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:02.0: PME# disabled
>pci 0000:00:02.1: reg 10 32bit mmio: [0xfeb00000-0xfeb000ff]
>pci 0000:00:02.1: supports D1 D2
>pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:02.1: PME# disabled
>pci 0000:00:04.0: reg 10 io port: [0xf000-0xf0ff]
>pci 0000:00:04.0: reg 14 io port: [0xec00-0xecff]
>pci 0000:00:04.0: reg 18 32bit mmio: [0xfe02d000-0xfe02dfff]
>pci 0000:00:04.0: supports D1 D2
>pci 0000:00:06.0: reg 20 io port: [0xe000-0xe00f]
>pci 0000:00:07.0: reg 10 io port: [0x9f0-0x9f7]
>pci 0000:00:07.0: reg 14 io port: [0xbf0-0xbf3]
>pci 0000:00:07.0: reg 18 io port: [0x970-0x977]
>pci 0000:00:07.0: reg 1c io port: [0xb70-0xb73]
>pci 0000:00:07.0: reg 20 io port: [0xcc00-0xcc0f]
>pci 0000:00:07.0: reg 24 32bit mmio: [0xfe02b000-0xfe02bfff]
>pci 0000:00:08.0: reg 10 io port: [0x9e0-0x9e7]
>pci 0000:00:08.0: reg 14 io port: [0xbe0-0xbe3]
>pci 0000:00:08.0: reg 18 io port: [0x960-0x967]
>pci 0000:00:08.0: reg 1c io port: [0xb60-0xb63]
>pci 0000:00:08.0: reg 20 io port: [0xb800-0xb80f]
>pci 0000:00:08.0: reg 24 32bit mmio: [0xfe02a000-0xfe02afff]
>pci 0000:00:0a.0: reg 10 32bit mmio: [0xfe029000-0xfe029fff]
>pci 0000:00:0a.0: reg 14 io port: [0xb400-0xb407]
>pci 0000:00:0a.0: supports D1 D2
>pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:0a.0: PME# disabled
>pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:0b.0: PME# disabled
>pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:0c.0: PME# disabled
>pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:0d.0: PME# disabled
>pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:0e.0: PME# disabled
>pci 0000:00:09.0: transparent bridge
>pci 0000:00:09.0: bridge io port: [0xa000-0xafff]
>pci 0000:00:09.0: bridge 32bit mmio: [0xfde00000-0xfdefffff]
>pci 0000:00:09.0: bridge 32bit mmio pref: [0xfdf00000-0xfdffffff]
>pci 0000:00:0b.0: bridge io port: [0x9000-0x9fff]
>pci 0000:00:0b.0: bridge 32bit mmio: [0xfdd00000-0xfddfffff]
>pci 0000:00:0b.0: bridge 64bit mmio pref: [0xfdc00000-0xfdcfffff]
>pci 0000:00:0c.0: bridge io port: [0x8000-0x8fff]
>pci 0000:00:0c.0: bridge 32bit mmio: [0xfdb00000-0xfdbfffff]
>pci 0000:00:0c.0: bridge 64bit mmio pref: [0xfda00000-0xfdafffff]
>pci 0000:00:0d.0: bridge io port: [0x7000-0x7fff]
>pci 0000:00:0d.0: bridge 32bit mmio: [0xfd900000-0xfd9fffff]
>pci 0000:00:0d.0: bridge 64bit mmio pref: [0xfd800000-0xfd8fffff]
>pci 0000:05:00.0: reg 10 32bit mmio: [0xfa000000-0xfaffffff]
>pci 0000:05:00.0: reg 14 64bit mmio: [0xd0000000-0xdfffffff]
>pci 0000:05:00.0: reg 1c 64bit mmio: [0xf8000000-0xf9ffffff]
>pci 0000:05:00.0: reg 24 io port: [0x6c00-0x6c7f]
>pci 0000:05:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
>pci 0000:00:0e.0: bridge io port: [0x6000-0x6fff]
>pci 0000:00:0e.0: bridge 32bit mmio: [0xf8000000-0xfbffffff]
>pci 0000:00:0e.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
>pci_bus 0000:00: on NUMA node 0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
>ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 *5 7 10 11)
>ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 7 *10 11)
>ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LMAC] (IRQs *3 4 5 7 10 11)
>ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 *7 10 11)
>ACPI: PCI Interrupt Link [LMCI] (IRQs 3 *4 5 7 10 11)
>ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 *5 7 10 11)
>ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 7 10 *11)
>ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 *10 11)
>ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 7 10 *11)
>ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
>ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0
>ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
>ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
>ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
>ACPI: Power Resource [PFAN] (off)
>SCSI subsystem initialized
>libata version 3.00 loaded.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>cfg80211: Calling CRDA to update world regulatory domain
>cfg80211: calling CRDA failed - unable to update world regulatory domain, using static definition
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 9 devices
>ACPI: ACPI bus type pnp unregistered
>system 00:01: ioport range 0x1000-0x107f has been reserved
>system 00:01: ioport range 0x1080-0x10ff has been reserved
>system 00:01: ioport range 0x1400-0x147f has been reserved
>system 00:01: ioport range 0x1480-0x14ff has been reserved
>system 00:01: ioport range 0x1800-0x187f has been reserved
>system 00:01: ioport range 0x1880-0x18ff has been reserved
>system 00:02: ioport range 0xb78-0xb7b has been reserved
>system 00:02: ioport range 0xf78-0xf7b has been reserved
>system 00:02: ioport range 0xa78-0xa7b has been reserved
>system 00:02: ioport range 0xe78-0xe7b has been reserved
>system 00:02: ioport range 0xbbc-0xbbf has been reserved
>system 00:02: ioport range 0xfbc-0xfbf has been reserved
>system 00:02: ioport range 0x4d0-0x4d1 has been reserved
>system 00:02: ioport range 0x294-0x297 has been reserved
>system 00:02: ioport range 0x290-0x29f could not be reserved
>system 00:07: iomem range 0xe0000000-0xefffffff has been reserved
>system 00:08: iomem range 0xcca00-0xcffff has been reserved
>system 00:08: iomem range 0xf0000-0xf7fff could not be reserved
>system 00:08: iomem range 0xf8000-0xfbfff could not be reserved
>system 00:08: iomem range 0xfc000-0xfffff could not be reserved
>system 00:08: iomem range 0x3fee0000-0x3fefffff could not be reserved
>system 00:08: iomem range 0xffff0000-0xffffffff has been reserved
>system 00:08: iomem range 0x0-0x9ffff could not be reserved
>system 00:08: iomem range 0x100000-0x3fedffff could not be reserved
>system 00:08: iomem range 0xfec00000-0xfec00fff has been reserved
>system 00:08: iomem range 0xfee00000-0xfeefffff has been reserved
>system 00:08: iomem range 0xfefff000-0xfeffffff has been reserved
>system 00:08: iomem range 0xfff80000-0xfff80fff has been reserved
>system 00:08: iomem range 0xfff90000-0xfffbffff has been reserved
>system 00:08: iomem range 0xfffed000-0xfffeffff has been reserved
>pci 0000:00:09.0: PCI bridge, secondary bus 0000:01
>pci 0000:00:09.0:   IO window: 0xa000-0xafff
>pci 0000:00:09.0:   MEM window: 0xfde00000-0xfdefffff
>pci 0000:00:09.0:   PREFETCH window: 0x000000fdf00000-0x000000fdffffff
>pci 0000:00:0b.0: PCI bridge, secondary bus 0000:02
>pci 0000:00:0b.0:   IO window: 0x9000-0x9fff
>pci 0000:00:0b.0:   MEM window: 0xfdd00000-0xfddfffff
>pci 0000:00:0b.0:   PREFETCH window: 0x000000fdc00000-0x000000fdcfffff
>pci 0000:00:0c.0: PCI bridge, secondary bus 0000:03
>pci 0000:00:0c.0:   IO window: 0x8000-0x8fff
>pci 0000:00:0c.0:   MEM window: 0xfdb00000-0xfdbfffff
>pci 0000:00:0c.0:   PREFETCH window: 0x000000fda00000-0x000000fdafffff
>pci 0000:00:0d.0: PCI bridge, secondary bus 0000:04
>pci 0000:00:0d.0:   IO window: 0x7000-0x7fff
>pci 0000:00:0d.0:   MEM window: 0xfd900000-0xfd9fffff
>pci 0000:00:0d.0:   PREFETCH window: 0x000000fd800000-0x000000fd8fffff
>pci 0000:00:0e.0: PCI bridge, secondary bus 0000:05
>pci 0000:00:0e.0:   IO window: 0x6000-0x6fff
>pci 0000:00:0e.0:   MEM window: 0xf8000000-0xfbffffff
>pci 0000:00:0e.0:   PREFETCH window: 0x000000d0000000-0x000000dfffffff
>pci 0000:00:09.0: setting latency timer to 64
>pci 0000:00:0b.0: setting latency timer to 64
>pci 0000:00:0c.0: setting latency timer to 64
>pci 0000:00:0d.0: setting latency timer to 64
>pci 0000:00:0e.0: setting latency timer to 64
>pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
>pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
>pci_bus 0000:01: resource 0 io:  [0xa000-0xafff]
>pci_bus 0000:01: resource 1 mem: [0xfde00000-0xfdefffff]
>pci_bus 0000:01: resource 2 mem: [0xfdf00000-0xfdffffff]
>pci_bus 0000:01: resource 3 io:  [0x00-0xffff]
>pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffff]
>pci_bus 0000:02: resource 0 io:  [0x9000-0x9fff]
>pci_bus 0000:02: resource 1 mem: [0xfdd00000-0xfddfffff]
>pci_bus 0000:02: resource 2 mem: [0xfdc00000-0xfdcfffff]
>pci_bus 0000:02: resource 3 mem: [0x0-0x0]
>pci_bus 0000:03: resource 0 io:  [0x8000-0x8fff]
>pci_bus 0000:03: resource 1 mem: [0xfdb00000-0xfdbfffff]
>pci_bus 0000:03: resource 2 mem: [0xfda00000-0xfdafffff]
>pci_bus 0000:03: resource 3 mem: [0x0-0x0]
>pci_bus 0000:04: resource 0 io:  [0x7000-0x7fff]
>pci_bus 0000:04: resource 1 mem: [0xfd900000-0xfd9fffff]
>pci_bus 0000:04: resource 2 mem: [0xfd800000-0xfd8fffff]
>pci_bus 0000:04: resource 3 mem: [0x0-0x0]
>pci_bus 0000:05: resource 0 io:  [0x6000-0x6fff]
>pci_bus 0000:05: resource 1 mem: [0xf8000000-0xfbffffff]
>pci_bus 0000:05: resource 2 mem: [0xd0000000-0xdfffffff]
>pci_bus 0000:05: resource 3 mem: [0x0-0x0]
>NET: Registered protocol family 2
>Switched to high resolution mode on CPU 0
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
>apm: overridden by ACPI.
>highmem bounce pool size: 64 pages
>NTFS driver 2.1.29 [Flags: R/W].
>msgmni has been set to 1748
>alg: No test for lzf (lzf-generic)
>alg: No test for stdrng (krng)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
>io scheduler noop registered
>io scheduler fifo registered
>io scheduler deadline registered (default)
>pci 0000:00:0b.0: Linking AER extended capability
>pci 0000:00:0c.0: Linking AER extended capability
>pci 0000:00:0d.0: Linking AER extended capability
>pci 0000:00:0e.0: Linking AER extended capability
>pci 0000:05:00.0: Boot video device
>pcieport-driver 0000:00:0b.0: setting latency timer to 64
>pcieport-driver 0000:00:0c.0: setting latency timer to 64
>pcieport-driver 0000:00:0d.0: setting latency timer to 64
>pcieport-driver 0000:00:0e.0: setting latency timer to 64
>vesafb: framebuffer at 0xf9000000, mapped to 0xf8080000, using 10240k, total 14336k
>vesafb: mode is 1280x1024x32, linelength=5120, pages=1
>vesafb: protected mode interface info at c000:afd0
>vesafb: pmi: set display start = c00cb033, set palette = c00cb08e
>vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da 
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
>Console: switching to colour frame buffer device 160x64
>fb0: VESA VGA frame buffer device
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
>brd: module loaded
>loop: loaded (max 8 devices)
>forcedeth: Reverse Engineered nForce ethernet driver. Version 0.62.
>ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
>forcedeth 0000:00:0a.0: PCI INT A -> Link[APCH] -> GSI 23 (level, low) -> IRQ 23
>forcedeth 0000:00:0a.0: setting latency timer to 64
>nv_probe: set workaround bit for reversed mac addr
>forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x3f1 @ 1, addr 00:50:8d:81:16:66
>forcedeth 0000:00:0a.0: highdma csum timirq gbit lnktim desc-v3
>Broadcom 43xx driver loaded [ Features: P, Firmware-ID: FW13 ]
>Uniform Multi-Platform E-IDE driver
>amd74xx 0000:00:06.0: UDMA133 controller
>amd74xx 0000:00:06.0: IDE controller (0x10de:0x0053 rev 0xf2)
>amd74xx 0000:00:06.0: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0xe000-0xe007
>    ide1: BM-DMA at 0xe008-0xe00f
>Probing IDE interface ide0...
>hda: PIONEER DVD-RW DVR-110, ATAPI CD/DVD-ROM drive
>hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
>hda: UDMA/66 mode selected
>Probing IDE interface ide1...
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>ide1 at 0x170-0x177,0x376 on irq 15
>ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
>ide-gd driver 1.18
>Driver 'sd' needs updating - please use bus_type methods
>Driver 'sr' needs updating - please use bus_type methods
>sata_nv 0000:00:07.0: version 3.5
>ACPI: PCI Interrupt Link [APSI] enabled at IRQ 22
>sata_nv 0000:00:07.0: PCI INT A -> Link[APSI] -> GSI 22 (level, low) -> IRQ 22
>sata_nv 0000:00:07.0: setting latency timer to 64
>scsi0 : sata_nv
>scsi1 : sata_nv
>ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xcc00 irq 22
>ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xcc08 irq 22
>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata1.00: ATA-7: WDC WD2000JS-00MHB0, 02.01C03, max UDMA/133
>ata1.00: 390721968 sectors, multi 16: LBA48 
>ata1.00: configured for UDMA/133
>scsi 0:0:0:0: Direct-Access     ATA      WDC WD2000JS-00M 02.0 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors: (200 GB/186 GiB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors: (200 GB/186 GiB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata2.00: ATA-7: WDC WD5000AAKS-00TMA0, 12.01C01, max UDMA/133
>ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata2.00: configured for UDMA/133
>scsi 1:0:0:0: Direct-Access     ATA      WDC WD5000AAKS-0 12.0 PQ: 0 ANSI: 5
>sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
>sd 1:0:0:0: [sdb] Write Protect is off
>sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
>sd 1:0:0:0: [sdb] Write Protect is off
>sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1
>sd 1:0:0:0: [sdb] Attached SCSI disk
>sd 1:0:0:0: Attached scsi generic sg1 type 0
>ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 21
>sata_nv 0000:00:08.0: PCI INT A -> Link[APSJ] -> GSI 21 (level, low) -> IRQ 21
>sata_nv 0000:00:08.0: setting latency timer to 64
>scsi2 : sata_nv
>scsi3 : sata_nv
>ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xb800 irq 21
>ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xb808 irq 21
>ata3: SATA link down (SStatus 0 SControl 300)
>ata4: SATA link down (SStatus 0 SControl 300)
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20
>ehci_hcd 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 20 (level, low) -> IRQ 20
>ehci_hcd 0000:00:02.1: setting latency timer to 64
>ehci_hcd 0000:00:02.1: EHCI Host Controller
>ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:02.1: debug port 1
>ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
>ehci_hcd 0000:00:02.1: irq 20, io mem 0xfeb00000
>ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 10 ports detected
>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
>ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 23 (level, low) -> IRQ 23
>ohci_hcd 0000:00:02.0: setting latency timer to 64
>ohci_hcd 0000:00:02.0: OHCI Host Controller
>ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:02.0: irq 23, io mem 0xfe02f000
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 10 ports detected
>PNP: No PS/2 controller found. Probing ports directly.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>EDAC MC: Ver: 2.1.0 Feb 25 2009
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>usbhid: v2.6:USB HID core driver
>TCP cubic registered
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>EXT4-fs: barriers enabled
>kjournald2 starting: pid 597, dev sda6:8, commit interval 5 seconds
>EXT4-fs: delayed allocation enabled
>EXT4-fs: file extents enabled
>EXT4-fs: mballoc enabled
>EXT4-fs: mounted filesystem sda6 with ordered data mode
>VFS: Mounted root (ext4 filesystem) readonly on device 8:6.
>Freeing unused kernel memory: 288k freed
>usb 2-1: new full speed USB device using ohci_hcd and address 2
>usb 2-1: configuration #1 chosen from 1 choice
>input: Logitech USB Gaming Mouse as /class/input/input0
>generic-usb 0003:046D:C049.0001: input: USB HID v1.11 Mouse [Logitech USB Gaming Mouse] on usb-0000:00:02.0-1/input0
>generic-usb 0003:046D:C049.0002: hiddev0: USB HID v1.11 Device [Logitech USB Gaming Mouse] on usb-0000:00:02.0-1/input1
>usb 2-3: new low speed USB device using ohci_hcd and address 3
>rtc_cmos 00:04: RTC can wake from S4
>rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one year, y3k, 242 bytes nvram
>usb 2-3: configuration #1 chosen from 1 choice
>input: Logitech Logitech USB Keyboard as /class/input/input1
>generic-usb 0003:046D:C30F.0003: input: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:02.0-3/input0
>input: Logitech Logitech USB Keyboard as /class/input/input2
>generic-usb 0003:046D:C30F.0004: input: USB HID v1.10 Device [Logitech Logitech USB Keyboard] on usb-0000:00:02.0-3/input1
>input: Power Button (FF) as /class/input/input3
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /class/input/input4
>ACPI: Power Button (CM) [PWRB]
>fan PNP0C0B:00: registered as cooling_device0
>ACPI: Fan [FAN] (off)
>processor ACPI_CPU:00: registered as cooling_device1
>thermal LNXTHERM:01: registered as thermal_zone0
>ACPI: Thermal Zone [THRM] (22 C)
>i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00
>i2c-adapter i2c-1: nForce2 SMBus adapter at 0x1c40
>ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22
>Intel ICH 0000:00:04.0: PCI INT A -> Link[APCJ] -> GSI 22 (level, low) -> IRQ 22
>Intel ICH 0000:00:04.0: setting latency timer to 64
>intel8x0_measure_ac97_clock: measured 50781 usecs
>intel8x0: clocking to 46875
>Initializing USB Mass Storage driver...
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>ide-cd driver 5.00
>ide-cd: hda: ATAPI 63X DVD-ROM DVD-R/RAM CD-R/RW drive, 2000kB Cache
>Uniform CD-ROM driver Revision: 3.20
>EXT4 FS on sda6, internal journal on sda6:8
>ReiserFS: sda7: found reiserfs format "3.6" with standard journal
>ReiserFS: sda7: using ordered data mode
>ReiserFS: sda7: journal params: device sda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: sda7: checking transaction log (sda7)
>ReiserFS: sda7: Using r5 hash to sort names
>EXT4-fs: barriers enabled
>kjournald2 starting: pid 1451, dev sda8:8, commit interval 5 seconds
>EXT4 FS on sda8, internal journal on sda8:8
>EXT4-fs: delayed allocation enabled
>EXT4-fs: file extents enabled
>EXT4-fs: mballoc enabled
>EXT4-fs: mounted filesystem sda8 with ordered data mode
>Adding 1244996k swap on /dev/sda9.  Priority:-1 extents:1 across:1244996k 
>eth0: no link during initialization.
>eth0: link up.

Actions: View

Attachments on bug 20466: 23582 | 23583

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.