Attachment 26238 Details for Bug 21204 – dmesg output

dmesg output

dmesg.log (text/plain), 31.13 KB, created by Thomas Bächler on 2009-05-27 01:41:00 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Thomas Bächler

Created: 2009-05-27 01:41:00 UTC

Size: 31.13 KB

patch

obsolete

>Linux version 2.6.30-rc7-00080-gcc82102 (thomas@artin) (gcc version 4.4.0 20090505 (prerelease) (GCC) ) #30 SMP PREEMPT Wed May 27 10:23:15 CEST 2009
>Command line: root=/dev/artin/arch64 cryptdevice=/dev/sda6:lvm_pv ro resume=/dev/mapper/artin-swap
>KERNEL supported cpus:
>  Intel GenuineIntel
>  AMD AuthenticAMD
>  Centaur CentaurHauls
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000dc000 - 00000000000e4000 (reserved)
> BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007f6e0000 (usable)
> BIOS-e820: 000000007f6e0000 - 000000007f700000 (ACPI NVS)
> BIOS-e820: 000000007f700000 - 0000000080000000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
> BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
> BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
>DMI present.
>last_pfn = 0x7f6e0 max_arch_pfn = 0x100000000
>MTRR default type: uncachable
>MTRR fixed ranges enabled:
>  00000-9FFFF write-back
>  A0000-BFFFF uncachable
>  C0000-CFFFF write-protect
>  D0000-DFFFF uncachable
>  E0000-FFFFF write-protect
>MTRR variable ranges enabled:
>  0 base 000000000 mask F80000000 write-back
>  1 base 07F700000 mask FFFF00000 uncachable
>  2 base 07F800000 mask FFF800000 uncachable
>  3 disabled
>  4 disabled
>  5 disabled
>  6 disabled
>  7 disabled
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>init_memory_mapping: 0000000000000000-000000007f6e0000
> 0000000000 - 007f600000 page 2M
> 007f600000 - 007f6e0000 page 4k
>kernel direct mapping tables up to 7f6e0000 @ 8000-c000
>RAMDISK: 37df0000 - 37fef68a
>ACPI: RSDP 00000000000f6720 00024 (v02 LENOVO)
>ACPI: XSDT 000000007f6e67c6 00094 (v01 LENOVO TP-63    00000060  LTP 00000000)
>ACPI: FACP 000000007f6ecbc4 000F4 (v03 INTEL  TP-63    00000060 ALAN 00000001)
>ACPI: DSDT 000000007f6e85b5 0459B (v01 LENOVO TP-63    00000060 INTL 20060608)
>ACPI: FACS 000000007f6edfc0 00040
>ACPI: APIC 000000007f6eccb8 00068 (v01 INTEL  TP-63    00000060 LOHR 0000005A)
>ACPI: HPET 000000007f6ecd20 00038 (v01 INTEL  TP-63    00000060 LOHR 0000005A)
>ACPI: MCFG 000000007f6ecd58 0003C (v01 INTEL  TP-63    00000060 LOHR 0000005A)
>ACPI: TCPA 000000007f6ecd94 00032 (v01 Phoeni TP-63    00000060  TL  00000000)
>ACPI: SLIC 000000007f6ecdc6 00176 (v01 LENOVO TP-63    00000060 TBD  00000001)
>ACPI: DBGP 000000007f6ecf3c 00034 (v01 LENOVO TP-63    00000060 LOHR 00000000)
>ACPI: APIC 000000007f6ecf70 00068 (v01 PTLTD  TP-63    00000060  LTP 00000000)
>ACPI: BOOT 000000007f6ecfd8 00028 (v01 PTLTD  TP-63    00000060  LTP 00000001)
>ACPI: SSDT 000000007f6e7f66 0064F (v01 SataRe  SataPri 00001000 INTL 20050624)
>ACPI: SSDT 000000007f6e78d4 00692 (v01 SataRe  SataSec 00001000 INTL 20050624)
>ACPI: SSDT 000000007f6e6e08 0025F (v01  PmRef  Cpu0Tst 00003000 INTL 20050624)
>ACPI: SSDT 000000007f6e6d62 000A6 (v01  PmRef  Cpu1Tst 00003000 INTL 20050624)
>ACPI: SSDT 000000007f6e685a 00508 (v01  PmRef    CpuPm 00003000 INTL 20050624)
>ACPI: BIOS bug: multiple APIC/MADT found, using 0
>ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
>ACPI: Local APIC address 0xfee00000
>(7 early reservations) ==> bootmem [0000000000 - 007f6e0000]
>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
>  #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
>  #2 [0000200000 - 00006a2f9c]    TEXT DATA BSS ==> [0000200000 - 00006a2f9c]
>  #3 [0037df0000 - 0037fef68a]          RAMDISK ==> [0037df0000 - 0037fef68a]
>  #4 [000009f800 - 0000100000]    BIOS reserved ==> [000009f800 - 0000100000]
>  #5 [00006a3000 - 00006a31f8]              BRK ==> [00006a3000 - 00006a31f8]
>  #6 [0000008000 - 000000a000]          PGTABLE ==> [0000008000 - 000000a000]
> [ffffe20000000000-ffffe20001bfffff] PMD -> [ffff880001200000-ffff880002dfffff] on node 0
>Zone PFN ranges:
>  DMA      0x00000000 -> 0x00001000
>  DMA32    0x00001000 -> 0x00100000
>  Normal   0x00100000 -> 0x00100000
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0: 0x00000000 -> 0x0000009f
>    0: 0x00000100 -> 0x0007f6e0
>On node 0 totalpages: 521855
>  DMA zone: 56 pages used for memmap
>  DMA zone: 1287 pages reserved
>  DMA zone: 2656 pages, LIFO batch:0
>  DMA32 zone: 7081 pages used for memmap
>  DMA32 zone: 510775 pages, LIFO batch:31
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 0, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Using ACPI (MADT) for SMP configuration information
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>SMP: Allowing 2 CPUs, 0 hotplug CPUs
>nr_irqs_gsi: 24
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
>PM: Registered nosave memory: 00000000000dc000 - 00000000000e4000
>PM: Registered nosave memory: 00000000000e4000 - 00000000000e8000
>PM: Registered nosave memory: 00000000000e8000 - 0000000000100000
>Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
>NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
>PERCPU: Embedded 25 pages at ffff880001010000, static data 70560 bytes
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 513431
>Kernel command line: root=/dev/artin/arch64 cryptdevice=/dev/sda6:lvm_pv ro resume=/dev/mapper/artin-swap
>Initializing CPU#0
>NR_IRQS:320
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>Extended CMOS year: 2000
>Fast TSC calibration using PIT
>Detected 1728.923 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Checking aperture...
>No AGP bridge found
>Memory: 2047812k/2087808k available (2481k kernel code, 388k absent, 38896k reserved, 1003k data, 336k init)
>SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
>hpet clockevent registered
>HPET: 3 timers in total, 0 timers will be used for per-cpu timer
>Calibrating delay loop (skipped), value calculated using timer frequency.. 3459.92 BogoMIPS (lpj=5763076)
>Mount-cache hash table entries: 256
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU0: Thermal monitoring handled by SMI
>using mwait in idle threads.
>ACPI: Core revision 20090320
>Setting APIC routing to flat
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>CPU0: Intel(R) Core(TM)2 CPU         T5300  @ 1.73GHz stepping 02
>Booting processor 1 APIC 0x1 ip 0x6000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 3459.17 BogoMIPS (lpj=5763483)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU1: Thermal monitoring enabled (TM2)
>x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
>CPU1: Intel(R) Core(TM)2 CPU         T5300  @ 1.73GHz stepping 02
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Brought up 2 CPUs
>Total of 2 processors activated (6918.09 BogoMIPS).
>net_namespace: 1872 bytes
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
>PCI: MCFG area at e0000000 reserved in E820
>PCI: Using MMCONFIG at e0000000 - efffffff
>PCI: Using configuration type 1 for base access
>bio: create slab <bio-0> at 0
>ACPI: EC: Look up EC in DSDT
>ACPI: BIOS _OSI(Linux) query ignored
>ACPI: EC: non-query interrupt received, switching to interrupt mode
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
>ACPI: EC: driver started in interrupt mode
>ACPI: No dock devices found.
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci 0000:00:02.0: reg 10 32bit mmio: [0xd0200000-0xd027ffff]
>pci 0000:00:02.0: reg 14 io port: [0x1800-0x1807]
>pci 0000:00:02.0: reg 18 32bit mmio: [0xc0000000-0xcfffffff]
>pci 0000:00:02.0: reg 1c 32bit mmio: [0xd0300000-0xd033ffff]
>pci 0000:00:02.1: reg 10 32bit mmio: [0xd0280000-0xd02fffff]
>pci 0000:00:1b.0: reg 10 64bit mmio: [0xd0340000-0xd0343fff]
>pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1b.0: PME# disabled
>pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.0: PME# disabled
>pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.1: PME# disabled
>pci 0000:00:1d.0: reg 20 io port: [0x1820-0x183f]
>pci 0000:00:1d.1: reg 20 io port: [0x1840-0x185f]
>pci 0000:00:1d.2: reg 20 io port: [0x1860-0x187f]
>pci 0000:00:1d.3: reg 20 io port: [0x1880-0x189f]
>pci 0000:00:1d.7: reg 10 32bit mmio: [0xd0544000-0xd05443ff]
>pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1d.7: PME# disabled
>pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
>pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
>pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 1670 (mask 0003)
>pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at ff2c (mask 007f)
>pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at ff2c (mask 0003)
>pci 0000:00:1f.2: reg 10 io port: [0x00-0x07]
>pci 0000:00:1f.2: reg 14 io port: [0x00-0x03]
>pci 0000:00:1f.2: reg 18 io port: [0x00-0x07]
>pci 0000:00:1f.2: reg 1c io port: [0x00-0x03]
>pci 0000:00:1f.2: reg 20 io port: [0x18b0-0x18bf]
>pci 0000:00:1f.2: PME# supported from D3hot
>pci 0000:00:1f.2: PME# disabled
>pci 0000:00:1f.3: reg 20 io port: [0x18c0-0x18df]
>pci 0000:03:00.0: reg 10 32bit mmio: [0xd0000000-0xd0000fff]
>pci 0000:03:00.0: PME# supported from D0 D3hot
>pci 0000:03:00.0: PME# disabled
>pci 0000:00:1c.1: bridge 32bit mmio: [0xd0000000-0xd00fffff]
>pci 0000:05:01.0: reg 10 io port: [0x2000-0x20ff]
>pci 0000:05:01.0: reg 14 32bit mmio: [0xd0100000-0xd01000ff]
>pci 0000:05:01.0: supports D1 D2
>pci 0000:05:01.0: PME# supported from D1 D2 D3hot D3cold
>pci 0000:05:01.0: PME# disabled
>pci 0000:05:04.0: reg 10 32bit mmio: [0x000000-0x000fff]
>pci 0000:05:04.0: supports D1 D2
>pci 0000:05:04.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:05:04.0: PME# disabled
>pci 0000:05:06.0: reg 10 32bit mmio: [0xd0100800-0xd0100fff]
>pci 0000:05:06.0: supports D1 D2
>pci 0000:05:06.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:05:06.0: PME# disabled
>pci 0000:05:06.1: reg 10 32bit mmio: [0xd0100400-0xd01004ff]
>pci 0000:05:06.1: supports D1 D2
>pci 0000:05:06.1: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:05:06.1: PME# disabled
>pci 0000:05:06.2: reg 10 32bit mmio: [0xd0101000-0xd01010ff]
>pci 0000:05:06.2: supports D1 D2
>pci 0000:05:06.2: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:05:06.2: PME# disabled
>pci 0000:05:06.3: reg 10 32bit mmio: [0xd0101400-0xd01014ff]
>pci 0000:05:06.3: supports D1 D2
>pci 0000:05:06.3: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:05:06.3: PME# disabled
>pci 0000:00:1e.0: transparent bridge
>pci 0000:00:1e.0: bridge io port: [0x2000-0x2fff]
>pci 0000:00:1e.0: bridge 32bit mmio: [0xd0100000-0xd01fffff]
>pci_bus 0000:00: on NUMA node 0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
>ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
>ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
>ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
>ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 7 11 12 14 15)
>PCI: Using ACPI for IRQ routing
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 11 devices
>ACPI: ACPI bus type pnp unregistered
>system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
>system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
>system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
>system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
>system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
>system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved
>system 00:01: iomem range 0xfed40000-0xfed44fff has been reserved
>system 00:01: iomem range 0xfed45000-0xfed8ffff has been reserved
>system 00:06: ioport range 0x680-0x69f has been reserved
>system 00:06: ioport range 0x800-0x80f has been reserved
>system 00:06: ioport range 0x1000-0x107f has been reserved
>system 00:06: ioport range 0x1180-0x11bf has been reserved
>system 00:06: ioport range 0x1640-0x164f has been reserved
>system 00:06: ioport range 0xfe00-0xfe7f has been reserved
>system 00:06: ioport range 0xff00-0xff7f has been reserved
>system 00:07: ioport range 0x6a0-0x6af has been reserved
>system 00:07: ioport range 0x6b0-0x6ff has been reserved
>pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
>pci 0000:00:1c.0:   IO window: disabled
>pci 0000:00:1c.0:   MEM window: disabled
>pci 0000:00:1c.0:   PREFETCH window: disabled
>pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
>pci 0000:00:1c.1:   IO window: disabled
>pci 0000:00:1c.1:   MEM window: 0xd0000000-0xd00fffff
>pci 0000:00:1c.1:   PREFETCH window: disabled
>pci 0000:05:04.0: CardBus bridge, secondary bus 0000:06
>pci 0000:05:04.0:   IO window: 0x002400-0x0024ff
>pci 0000:05:04.0:   IO window: 0x002800-0x0028ff
>pci 0000:05:04.0:   PREFETCH window: 0x88000000-0x8bffffff
>pci 0000:05:04.0:   MEM window: 0x8c000000-0x8fffffff
>pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05
>pci 0000:00:1e.0:   IO window: 0x2000-0x2fff
>pci 0000:00:1e.0:   MEM window: 0xd0100000-0xd01fffff
>pci 0000:00:1e.0:   PREFETCH window: 0x00000088000000-0x0000008bffffff
>pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>pci 0000:00:1c.0: setting latency timer to 64
>pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:1c.1: setting latency timer to 64
>pci 0000:00:1e.0: enabling device (0004 -> 0007)
>pci 0000:00:1e.0: setting latency timer to 64
>pci 0000:05:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
>pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
>pci_bus 0000:03: resource 1 mem: [0xd0000000-0xd00fffff]
>pci_bus 0000:05: resource 0 io:  [0x2000-0x2fff]
>pci_bus 0000:05: resource 1 mem: [0xd0100000-0xd01fffff]
>pci_bus 0000:05: resource 2 pref mem [0x88000000-0x8bffffff]
>pci_bus 0000:05: resource 3 io:  [0x00-0xffff]
>pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffffffffffff]
>pci_bus 0000:06: resource 0 io:  [0x2400-0x24ff]
>pci_bus 0000:06: resource 1 io:  [0x2800-0x28ff]
>pci_bus 0000:06: resource 2 pref mem [0x88000000-0x8bffffff]
>pci_bus 0000:06: resource 3 mem: [0x8c000000-0x8fffffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
>TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 262144 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>Unpacking initramfs...
>Switched to high resolution mode on CPU 1
>Switched to high resolution mode on CPU 0
>Freeing initrd memory: 2045k freed
>Simple Boot Flag at 0x36 set to 0x1
>msgmni has been set to 4005
>alg: No test for stdrng (krng)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci 0000:00:02.0: Boot video device
>pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
>pcieport-driver 0000:00:1c.0: setting latency timer to 64
>pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X
>pcieport-driver 0000:00:1c.1: setting latency timer to 64
>Linux agpgart interface v0.103
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>i8042.c: Detected active multiplexing controller, rev 1.1.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX0 port at 0x60,0x64 irq 12
>serio: i8042 AUX1 port at 0x60,0x64 irq 12
>serio: i8042 AUX2 port at 0x60,0x64 irq 12
>serio: i8042 AUX3 port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>cpuidle: using governor ladder
>cpuidle: using governor menu
>TCP cubic registered
>NET: Registered protocol family 17
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
>registered taskstats version 1
>Freeing unused kernel memory: 336k freed
>agpgart-intel 0000:00:00.0: Intel 945GM Chipset
>agpgart-intel 0000:00:00.0: detected 7932K stolen memory
>agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
>acpi device:07: registered as cooling_device0
>input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:06/input/input1
>ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
>[drm] Initialized drm 1.1.0 20060810
>i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>i915 0000:00:02.0: setting latency timer to 64
>[drm] TV-13: set mode NTSC 480i 0
>allocated 1280x800 fb: 0x007df000, bo ffff88007e1476c0
>Console: switching to colour frame buffer device 160x50
>[drm] LVDS-8: set mode 1280x800 15
>fb0: inteldrmfb frame buffer device
>registered panic notifier
>[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
>SCSI subsystem initialized
>libata version 3.00 loaded.
>ata_piix 0000:00:1f.2: version 2.13
>ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
>ata_piix 0000:00:1f.2: setting latency timer to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x18b0 irq 14
>ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18b8 irq 15
>ata1.00: ATA-7: FUJITSU MHV2120BH PL, 0084002A, max UDMA/100
>ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata1.00: configured for UDMA/100
>scsi 0:0:0:0: Direct-Access     ATA      FUJITSU MHV2120B 0084 PQ: 0 ANSI: 5
>ata2.00: ATAPI: HL-DT-ST DVDRAM GMA-4082N, HA01, max UDMA/33
>ata2.00: configured for UDMA/33
>scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GMA-4082N HA01 PQ: 0 ANSI: 5
>Driver 'sd' needs updating - please use bus_type methods
>sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 < sda5 sda6 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
>PM: Starting manual resume from disk
>PM: Starting manual resume from disk
>EXT4-fs: barriers enabled
>EXT4-fs: delayed allocation enabled
>EXT4-fs: file extents enabled
>EXT4-fs: mballoc enabled
>EXT4-fs: mounted filesystem dm-1 with ordered data mode
>kjournald2 starting: pid 654, dev dm-1:8, commit interval 5 seconds
>rtc_cmos 00:08: RTC can wake from S4
>rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
>udev: starting version 141
>ACPI: SSDT 000000007f6e75d4 00238 (v01  PmRef  Cpu0Ist 00003000 INTL 20050624)
>ACPI: SSDT 000000007f6e7067 004E8 (v01  PmRef  Cpu0Cst 00003001 INTL 20050624)
>ACPI Warning (processor_throttling-0843): Invalid throttling state, reset
> [20090320]
>Monitor-Mwait will be used to enter C-1 state
>Monitor-Mwait will be used to enter C-2 state
>Monitor-Mwait will be used to enter C-3 state
>Marking TSC unstable due to TSC halts in idle
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>processor ACPI_CPU:00: registered as cooling_device1
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI: SSDT 000000007f6e780c 000C8 (v01  PmRef  Cpu1Ist 00003000 INTL 20050624)
>ACPI: SSDT 000000007f6e754f 00085 (v01  PmRef  Cpu1Cst 00003000 INTL 20050624)
>ACPI Warning (processor_throttling-0843): Invalid throttling state, reset
> [20090320]
>ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
>processor ACPI_CPU:01: registered as cooling_device2
>ACPI: Processor [CPU1] (supports 8 throttling states)
>coretemp coretemp.0: Using relative temperature scale!
>coretemp coretemp.1: Using relative temperature scale!
>ACPI: AC Adapter [ACAD] (on-line)
>ACPI: Battery Slot [BAT1] (battery present)
>input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
>ACPI: Power Button [PWRF]
>input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
>ACPI: Lid Switch [LID0]
>input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
>ACPI: Power Button [PWRB]
>Clocksource tsc unstable (delta = -124587433 ns)
>ACPI: Invalid active0 threshold
>thermal LNXTHERM:01: registered as thermal_zone0
>ACPI: Thermal Zone [TZ00] (49 C)
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>intel_rng: FWH not detected
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>ehci_hcd 0000:00:1d.7: setting latency timer to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1d.7: debug port 1
>ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
>ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd0544000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>cfg80211: Calling CRDA to update world regulatory domain
>i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>Driver 'sr' needs updating - please use bus_type methods
>sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>8139too Fast Ethernet driver 0.9.28
>8139too 0000:05:01.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
>8139too 0000:05:01.0: setting latency timer to 64
>eth0: RealTek RTL8139 at 0xffffc200210b6000, 00:0f:b0:d2:f1:f1, IRQ 21
>eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
>udev: renamed network interface eth0 to lan
>Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b1, caps: 0xa04753/0x200000
>input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input5
>yenta_cardbus 0000:05:04.0: CardBus bridge found [17aa:2075]
>yenta_cardbus 0000:05:04.0: Using CSCINT to route CSC interrupts to PCI
>yenta_cardbus 0000:05:04.0: Routing CardBus interrupts to PCI
>yenta_cardbus 0000:05:04.0: TI: mfunc 0x01111c12, devctl 0x44
>cfg80211: Calling CRDA for country: DE
>uhci_hcd: USB Universal Host Controller Interface driver
>uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>uhci_hcd 0000:00:1d.0: setting latency timer to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>uhci_hcd 0000:00:1d.1: setting latency timer to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>uhci_hcd 0000:00:1d.2: setting latency timer to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
>uhci_hcd 0000:00:1d.3: setting latency timer to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>iTCO_vendor_support: vendor-support=0
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
>iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x1060)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>cfg80211: Regulatory domain changed to country: DE
>	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>	(2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
>	(5150000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>	(5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm)
>yenta_cardbus 0000:05:04.0: ISA IRQ mask 0x0cf8, PCI irq 16
>yenta_cardbus 0000:05:04.0: Socket status: 30000006
>pci_bus 0000:05: Raising subordinate bus# of parent bus (#05) from #05 to #09
>yenta_cardbus 0000:05:04.0: pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff
>yenta_cardbus 0000:05:04.0: pcmcia: parent PCI bridge Memory window: 0xd0100000 - 0xd01fffff
>yenta_cardbus 0000:05:04.0: pcmcia: parent PCI bridge Memory window: 0x88000000 - 0x8bffffff
>ohci1394 0000:05:06.0: enabling device (0000 -> 0002)
>ohci1394 0000:05:06.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>ohci1394 0000:05:06.0: setting latency timer to 64
>sdhci: Secure Digital Host Controller Interface driver
>sdhci: Copyright(c) Pierre Ossman
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sr 1:0:0:0: Attached scsi generic sg1 type 5
>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22]  MMIO=[d0100800-d0100fff]  Max Packet=[2048]  IR/IT contexts=[4/4]
>HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>HDA Intel 0000:00:1b.0: setting latency timer to 64
>sdhci-pci 0000:05:06.1: SDHCI controller found [1180:0822] (rev 19)
>sdhci-pci 0000:05:06.1: enabling device (0000 -> 0002)
>sdhci-pci 0000:05:06.1: PCI INT B -> GSI 23 (level, low) -> IRQ 23
>sdhci-pci 0000:05:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
>sdhci-pci 0000:05:06.1: setting latency timer to 64
>Registered led device: mmc0::
>mmc0: SDHCI controller on PCI [0000:05:06.1] using DMA
>iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks
>iwl3945: Copyright(c) 2003-2009 Intel Corporation
>iwl3945 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>iwl3945 0000:03:00.0: setting latency timer to 64
>usb 2-2: new full speed USB device using uhci_hcd and address 2
>iwl3945 0000:03:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels
>iwl3945 0000:03:00.0: Detected Intel Wireless WiFi Link 3945ABG
>iwl3945 0000:03:00.0: irq 26 for MSI/MSI-X
>input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6
>usb 2-2: configuration #1 chosen from 1 choice
>phy0: Selected rate control algorithm 'iwl-3945-rs'
>usb 4-2: new full speed USB device using uhci_hcd and address 2
>Bluetooth: Core ver 2.15
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: Generic Bluetooth USB driver ver 0.5
>usbcore: registered new interface driver btusb
>usb 4-2: configuration #1 chosen from 1 choice
>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00023f71ab40d835]
>EXT4 FS on dm-1, internal journal on dm-1:8
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda5, internal journal
>EXT3-fs: mounted filesystem with writeback data mode.
>EXT4-fs: barriers enabled
>kjournald2 starting: pid 3292, dev dm-4:8, commit interval 5 seconds
>EXT4 FS on dm-4, internal journal on dm-4:8
>EXT4-fs: file extents enabled
>EXT4-fs: mballoc enabled
>EXT4-fs: mounted filesystem dm-4 with ordered data mode
>EXT4-fs: barriers enabled
>kjournald2 starting: pid 3293, dev dm-2:8, commit interval 5 seconds
>EXT4 FS on dm-2, internal journal on dm-2:8
>EXT4-fs: delayed allocation enabled
>EXT4-fs: file extents enabled
>EXT4-fs: mballoc enabled
>EXT4-fs: mounted filesystem dm-2 with ordered data mode
>Adding 2097144k swap on /dev/mapper/artin-swap.  Priority:-1 extents:1 across:2097144k 
>platform microcode: firmware: requesting intel-ucode/06-0f-02
>platform microcode: firmware: requesting intel-ucode/06-0f-02
>Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
>microcode: CPU0 updated from revision 0x51 to 0x57, date = 2007-03-15 
>microcode: CPU1 updated from revision 0x51 to 0x57, date = 2007-03-15 
>Microcode Update Driver: v2.00 removed.
>tun: Universal TUN/TAP device driver, 1.6
>tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
>ACPI: EC: GPE storm detected, transactions will use polling mode
>iwl3945 0000:03:00.0: firmware: requesting iwlwifi-3945-2.ucode
>iwl3945 0000:03:00.0: loaded firmware version 15.32.2.9
>Registered led device: iwl-phy0::radio
>Registered led device: iwl-phy0::assoc
>Registered led device: iwl-phy0::RX
>Registered led device: iwl-phy0::TX
>CE: hpet increasing min_delta_ns to 15000 nsec
>lan: link down
>Bluetooth: L2CAP ver 2.13
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.11
>wlan0: direct probe to AP 00:19:a9:fd:93:9f try 1
>Bluetooth: BNEP (Ethernet Emulation) ver 1.3
>wlan0: direct probe to AP 00:19:a9:fd:93:9f try 2
>wlan0: direct probe to AP 00:19:a9:fd:93:9f try 3
>Bridge firewalling registered
>wlan0: direct probe to AP 00:19:a9:fd:93:9f timed out
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
>nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
>sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
>Bluetooth: SCO (Voice Link) ver 0.6
>Bluetooth: SCO socket layer initialized
>[drm] TV-13: set mode NTSC 480i 0
>[drm] TV-13: set mode NTSC 480i 0
>[drm] TV-13: set mode NTSC 480i 0
>[drm] TV-13: set mode NTSC 480i 0
>wlan0: direct probe to AP 00:19:a9:fd:93:9f try 1
>wlan0: direct probe to AP 00:19:a9:fd:93:9f try 1
>wlan0: direct probe to AP 00:19:a9:fd:93:9f try 2
>wlan0: direct probe to AP 00:19:a9:fd:93:9f try 3
>wlan0: direct probe to AP 00:19:a9:fd:93:9f timed out
>Bluetooth: HIDP (Human Interface Emulation) ver 1.2
>input: Bluetooth Travel Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/bluetooth/hci0/hci0:11/input7
>generic-bluetooth 0005:046D:B002.0001: input,hidraw0: BLUETOOTH HID v48.09 Mouse [Bluetooth Travel Mouse] on 00:16:CF:F5:37:F5
>wlan0: authenticate with AP 00:19:a9:fd:93:90
>wlan0: authenticated
>wlan0: associate with AP 00:19:a9:fd:93:90
>wlan0: RX AssocResp from 00:19:a9:fd:93:90 (capab=0x431 status=0 aid=1)
>wlan0: associated
>cfg80211: Calling CRDA for country: DE
>cfg80211: Current regulatory domain updated by AP to: DE
>	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>	(2402000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[drm] TV-13: set mode NTSC 480i 0
>[drm] TV-13: set mode NTSC 480i 0
>[drm] TV-13: set mode NTSC 480i 0
>[drm] TV-13: set mode NTSC 480i 0
>[drm] TV-13: set mode NTSC 480i 0
>[drm] TV-13: set mode NTSC 480i 0
>CE: hpet increasing min_delta_ns to 22500 nsec
>[drm] TV-13: set mode NTSC 480i 0
>[drm] TV-13: set mode NTSC 480i 0

Actions: View

Attachments on bug 21204: 26212 | 26238 | 26696

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.