Attachment 26760 Details for Bug 22189 – correct detect tv throught HDMI

correct detect tv throught HDMI

Xorg.0.log (text/plain), 17.95 KB, created by Robin Zhang on 2009-06-13 07:35:22 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Robin Zhang

Created: 2009-06-13 07:35:22 UTC

Size: 17.95 KB

patch

obsolete

>
>X.Org X Server 1.6.0
>Release Date: 2009-2-25
>X Protocol Version 11, Revision 0
>Build Operating System: Linux 2.6.24-23-server i686 Ubuntu
>Current Operating System: Linux home-server 2.6.28-11-generic #42-Ubuntu SMP Fri Apr 17 01:57:59 UTC 2009 i686
>Build Date: 09 April 2009  02:10:02AM
>xorg-server 2:1.6.0-0ubuntu14 (buildd@rothera.buildd) 
>	Before reporting problems, check http://wiki.x.org
>	to make sure that you have the latest version.
>Markers: (--) probed, (**) from config file, (==) default setting,
>	(++) from command line, (!!) notice, (II) informational,
>	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
>(==) Log file: "/var/log/Xorg.0.log", Time: Sat Jun 13 00:12:06 2009
>(==) Using config file: "/etc/X11/xorg.conf"
>(==) No Layout section.  Using the first Screen section.
>(**) |-->Screen "Default Screen" (0)
>(**) |   |-->Monitor "Configured Monitor"
>(**) |   |-->Device "Configured Video Device"
>(==) Automatically adding devices
>(==) Automatically enabling devices
>(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
>	Entry deleted from font path.
>(==) FontPath set to:
>	/usr/share/fonts/X11/misc,
>	/usr/share/fonts/X11/100dpi/:unscaled,
>	/usr/share/fonts/X11/75dpi/:unscaled,
>	/usr/share/fonts/X11/Type1,
>	/usr/share/fonts/X11/100dpi,
>	/usr/share/fonts/X11/75dpi,
>	/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
>	built-ins
>(==) ModulePath set to "/usr/lib/xorg/modules"
>(II) Cannot locate a core pointer device.
>(II) Cannot locate a core keyboard device.
>(II) The server relies on HAL to provide the list of input devices.
>	If no devices become available, reconfigure HAL or disable AllowEmptyInput.
>(II) Loader magic: 0x3bc0
>(II) Module ABI versions:
>	X.Org ANSI C Emulation: 0.4
>	X.Org Video Driver: 5.0
>	X.Org XInput driver : 4.0
>	X.Org Server Extension : 2.0
>(II) Loader running on linux
>(++) using VT number 7
>
>(--) PCI:*(0@0:2:0) Intel Corporation 4 Series Chipset Integrated Graphics Controller rev 3, Mem @ 0xfe400000/4194304, 0xd0000000/268435456, I/O @ 0x0000cc00/8
>(II) Open ACPI successful (/var/run/acpid.socket)
>(II) System resource ranges:
>	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
>	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
>	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
>	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
>	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
>	[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
>(II) LoadModule: "extmod"
>(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
>(II) Module extmod: vendor="X.Org Foundation"
>	compiled for 1.6.0, module version = 1.0.0
>	Module class: X.Org Server Extension
>	ABI class: X.Org Server Extension, version 2.0
>(II) Loading extension MIT-SCREEN-SAVER
>(II) Loading extension XFree86-VidModeExtension
>(II) Loading extension XFree86-DGA
>(II) Loading extension DPMS
>(II) Loading extension XVideo
>(II) Loading extension XVideo-MotionCompensation
>(II) Loading extension X-Resource
>(II) LoadModule: "dbe"
>(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
>(II) Module dbe: vendor="X.Org Foundation"
>	compiled for 1.6.0, module version = 1.0.0
>	Module class: X.Org Server Extension
>	ABI class: X.Org Server Extension, version 2.0
>(II) Loading extension DOUBLE-BUFFER
>(II) LoadModule: "glx"
>(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
>(II) Module glx: vendor="X.Org Foundation"
>	compiled for 1.6.0, module version = 1.0.0
>	ABI class: X.Org Server Extension, version 2.0
>(==) AIGLX enabled
>(II) Loading extension GLX
>(II) LoadModule: "record"
>(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
>(II) Module record: vendor="X.Org Foundation"
>	compiled for 1.6.0, module version = 1.13.0
>	Module class: X.Org Server Extension
>	ABI class: X.Org Server Extension, version 2.0
>(II) Loading extension RECORD
>(II) LoadModule: "dri"
>(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
>(II) Module dri: vendor="X.Org Foundation"
>	compiled for 1.6.0, module version = 1.0.0
>	ABI class: X.Org Server Extension, version 2.0
>(II) Loading extension XFree86-DRI
>(II) LoadModule: "dri2"
>(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
>(II) Module dri2: vendor="X.Org Foundation"
>	compiled for 1.6.0, module version = 1.0.0
>	ABI class: X.Org Server Extension, version 2.0
>(II) Loading extension DRI2
>(II) LoadModule: "intel"
>(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
>(II) Module intel: vendor="X.Org Foundation"
>	compiled for 1.6.1.901, module version = 2.7.99
>	Module class: X.Org Video Driver
>	ABI class: X.Org Video Driver, version 5.0
>(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
>	i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
>	E7221 (i915), 915GM, 945G, 945GM, 945GME, IGD_GM, IGD_G, 965G, G35,
>	965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
>	Mobile IntelÂ® GM45 Express Chipset,
>	Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41, IGDNG_D,
>	IGDNG_M
>(II) Primary Device is: PCI 00@00:02:0
>(II) resource ranges after xf86ClaimFixedResources() call:
>	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
>	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
>	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
>	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
>	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
>	[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
>(II) resource ranges after probing:
>	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
>	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
>	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
>	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
>	[4] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B]
>	[5] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
>	[6] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
>	[7] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
>	[8] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
>	[9] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B]
>	[10] 0	0	0x000003c0 - 0x000003df (0x20) IS[B]
>(II) Loading sub module "vgahw"
>(II) LoadModule: "vgahw"
>(II) Loading /usr/lib/xorg/modules//libvgahw.so
>(II) Module vgahw: vendor="X.Org Foundation"
>	compiled for 1.6.0, module version = 0.1.0
>	ABI class: X.Org Video Driver, version 5.0
>(II) Loading sub module "ramdac"
>(II) LoadModule: "ramdac"
>(II) Module "ramdac" already built-in
>drmOpenDevice: node name is /dev/dri/card0
>drmOpenByBusid: Searching for BusID pci:0000:00:02.0
>drmOpenDevice: node name is /dev/dri/card0
>drmOpenByBusid: drmOpenMinor returns -1
>drmOpenDevice: node name is /dev/dri/card1
>drmOpenByBusid: drmOpenMinor returns -1
>drmOpenDevice: node name is /dev/dri/card2
>drmOpenByBusid: drmOpenMinor returns -1
>drmOpenDevice: node name is /dev/dri/card3
>drmOpenByBusid: drmOpenMinor returns -1
>drmOpenDevice: node name is /dev/dri/card4
>drmOpenByBusid: drmOpenMinor returns -1
>drmOpenDevice: node name is /dev/dri/card5
>drmOpenByBusid: drmOpenMinor returns -1
>drmOpenDevice: node name is /dev/dri/card6
>drmOpenByBusid: drmOpenMinor returns -1
>drmOpenDevice: node name is /dev/dri/card7
>drmOpenByBusid: drmOpenMinor returns -1
>drmOpenDevice: node name is /dev/dri/card8
>drmOpenByBusid: drmOpenMinor returns -1
>drmOpenDevice: node name is /dev/dri/card9
>drmOpenByBusid: drmOpenMinor returns -1
>drmOpenDevice: node name is /dev/dri/card10
>drmOpenByBusid: drmOpenMinor returns -1
>drmOpenDevice: node name is /dev/dri/card11
>drmOpenByBusid: drmOpenMinor returns -1
>drmOpenDevice: node name is /dev/dri/card12
>drmOpenByBusid: drmOpenMinor returns -1
>drmOpenDevice: node name is /dev/dri/card13
>drmOpenByBusid: drmOpenMinor returns -1
>drmOpenDevice: node name is /dev/dri/card14
>drmOpenByBusid: drmOpenMinor returns -1
>drmOpenDevice: node name is /dev/dri/card0
>drmOpenDevice: node name is /dev/dri/card0
>drmOpenDevice: node name is /dev/dri/card1
>drmOpenDevice: node name is /dev/dri/card2
>drmOpenDevice: node name is /dev/dri/card3
>drmOpenDevice: node name is /dev/dri/card4
>drmOpenDevice: node name is /dev/dri/card5
>drmOpenDevice: node name is /dev/dri/card6
>drmOpenDevice: node name is /dev/dri/card7
>drmOpenDevice: node name is /dev/dri/card8
>drmOpenDevice: node name is /dev/dri/card9
>drmOpenDevice: node name is /dev/dri/card10
>drmOpenDevice: node name is /dev/dri/card11
>drmOpenDevice: node name is /dev/dri/card12
>drmOpenDevice: node name is /dev/dri/card13
>drmOpenDevice: node name is /dev/dri/card14
>(EE) intel(0): [drm] Failed to open DRM device for 
>(II) intel(0): Creating default Display subsection in Screen section
>	"Default Screen" for depth/fbbpp 24/32
>(==) intel(0): Depth 24, (--) framebuffer bpp 32
>(==) intel(0): RGB weight 888
>(==) intel(0): Default visual is TrueColor
>(II) intel(0): Integrated Graphics Chipset: Intel(R) G41
>(--) intel(0): Chipset: "G41"
>(--) intel(0): Linear framebuffer at 0xD0000000
>(--) intel(0): IO registers at addr 0xFE400000 size 4194304
>(WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
>(--) intel(0): Using UXA for acceleration
>(II) intel(0): 2 display pipes available.
>(II) Loading sub module "ddc"
>(II) LoadModule: "ddc"
>(II) Module "ddc" already built-in
>(II) Loading sub module "i2c"
>(II) LoadModule: "i2c"
>(II) Module "i2c" already built-in
>(II) intel(0): Output VGA using monitor section Configured Monitor
>(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized.
>(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70.
>(II) intel(0): No SDVO device found on SDVOB
>(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" removed.
>(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" removed.
>(II) intel(0): Output HDMI-1 has no monitor section
>(II) intel(0): I2C bus "HDMIDDC_B" initialized.
>(II) intel(0): HDMI output 1 detected
>(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized.
>(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72.
>(II) intel(0): No SDVO device found on SDVOC
>(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed.
>(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed.
>(II) intel(0): I2C device "HDMIDDC_B:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "HDMIDDC_B:ddc2" registered at address 0xA0.
>(II) intel(0): 
> this is mytest
>(II) intel(0): EDID vendor "SHP", prod id 4051
>(II) intel(0): Output VGA disconnected
>(II) intel(0): Output HDMI-1 connected
>(II) intel(0): Using exact sizes for initial modes
>(II) intel(0): Output HDMI-1 using initial mode 1360x768
>(II) intel(0): detected 512 kB GTT.
>(II) intel(0): detected 32764 kB stolen memory.
>(==) intel(0): video overlay key set to 0x101fe
>(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
>(==) intel(0): DPI set to (96, 96)
>(II) Loading sub module "fb"
>(II) LoadModule: "fb"
>(II) Loading /usr/lib/xorg/modules//libfb.so
>(II) Module fb: vendor="X.Org Foundation"
>	compiled for 1.6.0, module version = 1.0.0
>	ABI class: X.Org ANSI C Emulation, version 0.4
>(II) intel(0): Comparing regs from server start up to After PreInit
>(==) Depth 24 pixmap format is 32 bpp
>(II) do I need RAC?  No, I don't.
>(II) resource ranges after preInit:
>	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
>	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
>	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
>	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
>	[4] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
>	[5] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
>	[6] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
>	[7] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
>	[8] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
>	[9] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
>	[10] 0	0	0x000003c0 - 0x000003df (0x20) IS[B](OprU)
>(II) intel(0): Kernel reported 482816 total, 1 used
>(II) intel(0): I830CheckAvailableMemory: 1931260 kB available
>(WW) intel(0): DRI2: failed to open drm device
>(**) intel(0): Framebuffer compression disabled
>(**) intel(0): Tiling enabled
>(==) intel(0): VideoRam: 262144 KB
>(II) intel(0): Attempting memory allocation with tiled buffers.
>(II) intel(0): Tiled allocation successful.
>(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
>(II) UXA(0): Driver registered support for the following operations:
>(II)         solid
>(II)         copy
>(II)         composite (RENDER acceleration)
>(==) intel(0): Backing store disabled
>(==) intel(0): Silken mouse enabled
>(II) intel(0): Initializing HW Cursor
>(WW) intel(0): drmSetMaster failed: Bad file descriptor
>(II) intel(0): Fixed memory allocation layout:
>(II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
>(II) intel(0): 0x00020000-0x00029fff: HW cursors (40 kB)
>(II) intel(0): 0x0002a000-0x00829fff: fake bufmgr (8192 kB)
>(II) intel(0): 0x0082a000-0x00c49fff: front buffer (4224 kB) X tiled
>(II) intel(0): 0x10000000:            end of aperture
>(WW) intel(0): ESR is 0x00000011, page table error
>(WW) intel(0): PGTBL_ER is 0x00100000, CS instruction GTT PTE
>(WW) intel(0): PRB0_CTL (0x0001f001) indicates ring buffer enabled
>(WW) intel(0): Existing errors found in hardware state.
>(II) intel(0): Output configuration:
>(II) intel(0):   Pipe A is on
>(II) intel(0):   Display plane A is now enabled and connected to pipe A.
>(II) intel(0):   Pipe B is off
>(II) intel(0):   Display plane B is now disabled and connected to pipe B.
>(II) intel(0):   Output VGA is connected to pipe none
>(II) intel(0):   Output HDMI-1 is connected to pipe A
>(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
>(II) intel(0): DPMS enabled
>(==) intel(0): Intel XvMC decoder disabled
>(II) intel(0): Set up textured video
>(II) intel(0): direct rendering: Failed
>(--) RandR disabled
>(II) Initializing built-in extension Generic Event Extension
>(II) Initializing built-in extension SHAPE
>(II) Initializing built-in extension MIT-SHM
>(II) Initializing built-in extension XInputExtension
>(II) Initializing built-in extension XTEST
>(II) Initializing built-in extension BIG-REQUESTS
>(II) Initializing built-in extension SYNC
>(II) Initializing built-in extension XKEYBOARD
>(II) Initializing built-in extension XC-MISC
>(II) Initializing built-in extension SECURITY
>(II) Initializing built-in extension XINERAMA
>(II) Initializing built-in extension XFIXES
>(II) Initializing built-in extension RENDER
>(II) Initializing built-in extension RANDR
>(II) Initializing built-in extension COMPOSITE
>(II) Initializing built-in extension DAMAGE
>(II) AIGLX: Screen 0 is not DRI2 capable
>(II) AIGLX: Screen 0 is not DRI capable
>(II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so
>(II) GLX: Initialized DRISWRAST GL provider for screen 0
>(II) intel(0): Setting screen physical size to 820 x 460
>(II) config/hal: Adding input device Macintosh mouse button emulation
>(II) LoadModule: "evdev"
>(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
>(II) Module evdev: vendor="X.Org Foundation"
>	compiled for 1.6.0, module version = 2.1.1
>	Module class: X.Org XInput Driver
>	ABI class: X.Org XInput driver, version 4.0
>(**) Macintosh mouse button emulation: always reports core events
>(**) Macintosh mouse button emulation: Device: "/dev/input/event2"
>(II) Macintosh mouse button emulation: Found 3 mouse buttons
>(II) Macintosh mouse button emulation: Found x and y relative axes
>(II) Macintosh mouse button emulation: Configuring as mouse
>(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
>(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
>(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
>(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
>(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
>(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
>(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
>(II) config/hal: Adding input device MLK RAPOO 8200
>(**) MLK RAPOO 8200: always reports core events
>(**) MLK RAPOO 8200: Device: "/dev/input/event4"
>(II) MLK RAPOO 8200: Found 6 mouse buttons
>(II) MLK RAPOO 8200: Found x and y relative axes
>(II) MLK RAPOO 8200: Found keys
>(II) MLK RAPOO 8200: Configuring as mouse
>(II) MLK RAPOO 8200: Configuring as keyboard
>(**) MLK RAPOO 8200: YAxisMapping: buttons 4 and 5
>(**) MLK RAPOO 8200: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
>(II) XINPUT: Adding extended input device "MLK RAPOO 8200" (type: KEYBOARD)
>(**) Option "xkb_rules" "evdev"
>(**) MLK RAPOO 8200: xkb_rules: "evdev"
>(**) Option "xkb_model" "pc105"
>(**) MLK RAPOO 8200: xkb_model: "pc105"
>(**) Option "xkb_layout" "us"
>(**) MLK RAPOO 8200: xkb_layout: "us"
>(**) MLK RAPOO 8200: (accel) keeping acceleration scheme 1
>(**) MLK RAPOO 8200: (accel) filter chain progression: 2.00
>(**) MLK RAPOO 8200: (accel) filter stage 0: 20.00 ms
>(**) MLK RAPOO 8200: (accel) set acceleration profile 0
>(II) config/hal: Adding input device MLK RAPOO 8200
>(**) MLK RAPOO 8200: always reports core events
>(**) MLK RAPOO 8200: Device: "/dev/input/event3"
>(II) MLK RAPOO 8200: Found keys
>(II) MLK RAPOO 8200: Configuring as keyboard
>(II) XINPUT: Adding extended input device "MLK RAPOO 8200" (type: KEYBOARD)
>(**) Option "xkb_rules" "evdev"
>(**) MLK RAPOO 8200: xkb_rules: "evdev"
>(**) Option "xkb_model" "pc105"
>(**) MLK RAPOO 8200: xkb_model: "pc105"
>(**) Option "xkb_layout" "us"
>(**) MLK RAPOO 8200: xkb_layout: "us"
>(II) intel(0): 
> this is mytest
>(II) intel(0): EDID vendor "SHP", prod id 4051
>(II) intel(0): Using EDID range info for horizontal sync
>(II) intel(0): Using EDID range info for vertical refresh
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1360x768"x0.0   85.50  1360 1424 1536 1792  768 771 777 795 +hsync +vsync (47.7 kHz)
>(II) intel(0): Modeline "1024x768"x0.0   65.50  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.7 kHz)
>(II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
>(II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
>(II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
>(II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
>(II) intel(0): EDID vendor "SHP", prod id 4051
>(WW) intel(0): drmDropMaster failed: Bad file descriptor
>(II) MLK RAPOO 8200: Close
>(II) UnloadModule: "evdev"
>(II) MLK RAPOO 8200: Close
>(II) UnloadModule: "evdev"
>(II) Macintosh mouse button emulation: Close
>(II) UnloadModule: "evdev"
> ddxSigGiveUp: Closing log

Actions: View

Attachments on bug 22189: 26607 | 26608 | 26609 | 26610 | 26656 | 26664 | 26760

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.