Attachment 28139 Details for Bug 23009 – dmesg from KMS kernel

dmesg from KMS kernel

kernel-messages (text/plain), 32.43 KB, created by Radu Benea on 2009-07-29 00:46:19 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Radu Benea

Created: 2009-07-29 00:46:19 UTC

Size: 32.43 KB

patch

obsolete

>Linux version 2.6.31-rc3-git3 (root@server) (gcc version 4.3.3 (Gentoo 4.3.3-r2 p1.2, pie-10.1.5) ) #1 SMP Mon Jul 20 17:18:42 EEST 2009
>Command line: root=/dev/sda2 irqpoll
>KERNEL supported cpus:
>  Intel GenuineIntel
>  AMD AuthenticAMD
>  Centaur CentaurHauls
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000d7ee0000 (usable)
> BIOS-e820: 00000000d7ee0000 - 00000000d7ee3000 (ACPI NVS)
> BIOS-e820: 00000000d7ee3000 - 00000000d7ef0000 (ACPI data)
> BIOS-e820: 00000000d7ef0000 - 00000000d7f00000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
> BIOS-e820: 0000000100000000 - 0000000128000000 (usable)
>DMI 2.3 present.
>last_pfn = 0x128000 max_arch_pfn = 0x400000000
>MTRR default type: uncachable
>MTRR fixed ranges enabled:
>  00000-9FFFF write-back
>  A0000-BFFFF uncachable
>  C0000-C7FFF write-protect
>  C8000-FFFFF uncachable
>MTRR variable ranges enabled:
>  0 base 0000000000 mask FF80000000 write-back
>  1 base 0080000000 mask FFC0000000 write-back
>  2 base 00C0000000 mask FFF0000000 write-back
>  3 base 00D0000000 mask FFF8000000 write-back
>  4 base 00D7F00000 mask FFFFF00000 uncachable
>  5 base 0100000000 mask FFE0000000 write-back
>  6 base 0120000000 mask FFF8000000 write-back
>  7 disabled
>TOM2: 0000000128000000 aka 4736M
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>e820 update range: 00000000d7f00000 - 0000000100000000 (usable) ==> (reserved)
>last_pfn = 0xd7ee0 max_arch_pfn = 0x400000000
>e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved)
>Scanning 1 areas for low memory corruption
>modified physical RAM map:
> modified: 0000000000000000 - 0000000000001000 (usable)
> modified: 0000000000001000 - 0000000000006000 (reserved)
> modified: 0000000000006000 - 000000000009f800 (usable)
> modified: 000000000009f800 - 00000000000a0000 (reserved)
> modified: 00000000000f0000 - 0000000000100000 (reserved)
> modified: 0000000000100000 - 00000000d7ee0000 (usable)
> modified: 00000000d7ee0000 - 00000000d7ee3000 (ACPI NVS)
> modified: 00000000d7ee3000 - 00000000d7ef0000 (ACPI data)
> modified: 00000000d7ef0000 - 00000000d7f00000 (reserved)
> modified: 00000000e0000000 - 00000000f0000000 (reserved)
> modified: 00000000fec00000 - 0000000100000000 (reserved)
> modified: 0000000100000000 - 0000000128000000 (usable)
>initial memory mapped : 0 - 20000000
>init_memory_mapping: 0000000000000000-00000000d7ee0000
> 0000000000 - 00d7e00000 page 2M
> 00d7e00000 - 00d7ee0000 page 4k
>kernel direct mapping tables up to d7ee0000 @ 8000-e000
>init_memory_mapping: 0000000100000000-0000000128000000
> 0100000000 - 0128000000 page 2M
>kernel direct mapping tables up to 128000000 @ c000-12000
>ACPI: RSDP 00000000000f6c70 00014 (v00 GBT   )
>ACPI: RSDT 00000000d7ee3000 00038 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
>ACPI: FACP 00000000d7ee3040 00074 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
>ACPI: DSDT 00000000d7ee30c0 0406A (v01 GBT    GBTUACPI 00001000 MSFT 03000000)
>ACPI: FACS 00000000d7ee0000 00040
>ACPI: SSDT 00000000d7ee7200 001C4 (v01 PTLTD  POWERNOW 00000001  LTP 00000001)
>ACPI: HPET 00000000d7ee7400 00038 (v01 GBT    GBTUACPI 42302E31 GBTU 00000098)
>ACPI: MCFG 00000000d7ee7440 0003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
>ACPI: APIC 00000000d7ee7140 00084 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
>ACPI: Local APIC address 0xfee00000
>(7 early reservations) ==> bootmem [0000000000 - 0128000000]
>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
>  #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
>  #2 [0001000000 - 00019c1c7c]    TEXT DATA BSS ==> [0001000000 - 00019c1c7c]
>  #3 [000009f800 - 0000100000]    BIOS reserved ==> [000009f800 - 0000100000]
>  #4 [00019c2000 - 00019c2092]              BRK ==> [00019c2000 - 00019c2092]
>  #5 [0000008000 - 000000c000]          PGTABLE ==> [0000008000 - 000000c000]
>  #6 [000000c000 - 000000d000]          PGTABLE ==> [000000c000 - 000000d000]
> [ffffea0000000000-ffffea00041fffff] PMD -> [ffff880028600000-ffff88002bffffff] on node 0
>Zone PFN ranges:
>  DMA      0x00000000 -> 0x00001000
>  DMA32    0x00001000 -> 0x00100000
>  Normal   0x00100000 -> 0x00128000
>Movable zone start PFN for each node
>early_node_map[4] active PFN ranges
>    0: 0x00000000 -> 0x00000001
>    0: 0x00000006 -> 0x0000009f
>    0: 0x00000100 -> 0x000d7ee0
>    0: 0x00100000 -> 0x00128000
>On node 0 totalpages: 1048186
>  DMA zone: 56 pages used for memmap
>  DMA zone: 104 pages reserved
>  DMA zone: 3834 pages, LIFO batch:0
>  DMA32 zone: 14280 pages used for memmap
>  DMA32 zone: 866072 pages, LIFO batch:31
>  Normal zone: 2240 pages used for memmap
>  Normal zone: 161600 pages, LIFO batch:31
>Detected use of extended apic ids on hypertransport bus
>ACPI: PM-Timer IO Port: 0x4008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Using ACPI (MADT) for SMP configuration information
>ACPI: HPET id: 0x10b9a201 base: 0xfed00000
>SMP: Allowing 4 CPUs, 2 hotplug CPUs
>nr_irqs_gsi: 24
>Allocating PCI resources starting at f0000000 (gap: f0000000:ec00000)
>NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
>PERCPU: Embedded 25 pages at ffff880028022000, static data 72736 bytes
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1031506
>Kernel command line: root=/dev/sda2 irqpoll
>Misrouted IRQ fixup and polling support enabled
>This may significantly impact system performance
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
>Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Initializing CPU#0
>Checking aperture...
>No AGP bridge found
>Node 0: aperture @ fffe000000 size 32 MB
>Aperture beyond 4GB. Ignoring.
>Your BIOS doesn't leave a aperture memory hole
>Please enable the IOMMU option in the BIOS setup
>This costs you 64 MB of RAM
>Mapping aperture over 65536 KB of RAM @ 20000000
>Memory: 4050100k/4849664k available (6005k kernel code, 656920k absent, 141700k reserved, 2856k data, 496k init)
>SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
>NR_IRQS:384
>Fast TSC calibration using PIT
>Detected 1908.541 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>hpet clockevent registered
>HPET: 4 timers in total, 0 timers will be used for per-cpu timer
>Calibrating delay loop (skipped), value calculated using timer frequency.. 3817.08 BogoMIPS (lpj=1908541)
>Security Framework initialized
>Mount-cache hash table entries: 256
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>tseg: 00d7f00000
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>mce: CPU supports 5 MCE banks
>using C1E aware idle routine
>ACPI: Core revision 20090521
>Setting APIC routing to flat
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>CPU0: AMD Athlon(tm) X2 Dual Core Processor BE-2300 stepping 02
>Booting processor 1 APIC 0x1 ip 0x6000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 3817.39 BogoMIPS (lpj=1908698)
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>mce: CPU supports 5 MCE banks
>x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
>CPU1: AMD Athlon(tm) X2 Dual Core Processor BE-2300 stepping 02
>Brought up 2 CPUs
>Total of 2 processors activated (7634.47 BogoMIPS).
>CPU0 attaching sched-domain:
> domain 0: span 0-1 level MC
>  groups: 0 1
>CPU1 attaching sched-domain:
> domain 0: span 0-1 level MC
>  groups: 1 0
>xor: automatically using best checksumming function: generic_sse
>   generic_sse:  5872.000 MB/sec
>xor: using function: generic_sse (5872.000 MB/sec)
>NET: Registered protocol family 16
>node 0 link 0: io port [c000, ffff]
>TOM: 00000000d8000000 aka 3456M
>node 0 link 0: mmio [a0000, bffff]
>node 0 link 0: mmio [d8000000, fe02ffff]
>node 0 link 0: mmio [e0000000, efffffff]
>TOM2: 0000000128000000 aka 4736M
>bus: [00,03] on node 0 link 0
>bus: 00 index 0 io port: [0, ffff]
>bus: 00 index 1 mmio: [a0000, bffff]
>bus: 00 index 2 mmio: [d8000000, ffffffff]
>bus: 00 index 3 mmio: [128000000, fcffffffff]
>ACPI: bus type pci registered
>dca service started, version 1.8
>PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
>PCI: MCFG area at e0000000 reserved in E820
>PCI: Using MMCONFIG at e0000000 - efffffff
>PCI: Using configuration type 1 for base access
>bio: create slab <bio-0> at 0
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: No dock devices found.
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci 0000:00:00.0: reg 1c 64bit mmio: [0xe0000000-0xffffffff]
>pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:02.0: PME# disabled
>pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:0a.0: PME# disabled
>pci 0000:00:12.0: reg 10 io port: [0xff00-0xff07]
>pci 0000:00:12.0: reg 14 io port: [0xfe00-0xfe03]
>pci 0000:00:12.0: reg 18 io port: [0xfd00-0xfd07]
>pci 0000:00:12.0: reg 1c io port: [0xfc00-0xfc03]
>pci 0000:00:12.0: reg 20 io port: [0xfb00-0xfb0f]
>pci 0000:00:12.0: reg 24 32bit mmio: [0xfe02f000-0xfe02f3ff]
>pci 0000:00:13.0: reg 10 32bit mmio: [0xfe02e000-0xfe02efff]
>pci 0000:00:13.1: reg 10 32bit mmio: [0xfe02d000-0xfe02dfff]
>pci 0000:00:13.2: reg 10 32bit mmio: [0xfe02c000-0xfe02cfff]
>pci 0000:00:13.3: reg 10 32bit mmio: [0xfe02b000-0xfe02bfff]
>pci 0000:00:13.4: reg 10 32bit mmio: [0xfe02a000-0xfe02afff]
>pci 0000:00:13.5: reg 10 32bit mmio: [0xfe029000-0xfe0290ff]
>pci 0000:00:13.5: supports D1 D2
>pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot
>pci 0000:00:13.5: PME# disabled
>pci 0000:00:14.0: reg 10 io port: [0xb00-0xb0f]
>pci 0000:00:14.1: reg 10 io port: [0x00-0x07]
>pci 0000:00:14.1: reg 14 io port: [0x00-0x03]
>pci 0000:00:14.1: reg 18 io port: [0x00-0x07]
>pci 0000:00:14.1: reg 1c io port: [0x00-0x03]
>pci 0000:00:14.1: reg 20 io port: [0xf900-0xf90f]
>pci 0000:00:14.2: reg 10 64bit mmio: [0xfe024000-0xfe027fff]
>pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
>pci 0000:00:14.2: PME# disabled
>pci 0000:01:00.0: reg 10 32bit mmio: [0xd8000000-0xdfffffff]
>pci 0000:01:00.0: reg 14 io port: [0xde00-0xdeff]
>pci 0000:01:00.0: reg 18 32bit mmio: [0xfdef0000-0xfdefffff]
>pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
>pci 0000:01:00.0: supports D1 D2
>pci 0000:01:00.1: reg 10 32bit mmio: [0xfdee0000-0xfdeeffff]
>pci 0000:01:00.1: supports D1 D2
>pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
>pci 0000:00:02.0: bridge io port: [0xd000-0xdfff]
>pci 0000:00:02.0: bridge 32bit mmio: [0xfde00000-0xfdefffff]
>pci 0000:00:02.0: bridge 64bit mmio pref: [0xd8000000-0xdfffffff]
>pci 0000:02:00.0: reg 10 io port: [0xee00-0xeeff]
>pci 0000:02:00.0: reg 18 64bit mmio: [0xfddff000-0xfddfffff]
>pci 0000:02:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
>pci 0000:02:00.0: supports D1 D2
>pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold
>pci 0000:02:00.0: PME# disabled
>pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
>pci 0000:00:0a.0: bridge io port: [0xe000-0xefff]
>pci 0000:00:0a.0: bridge 32bit mmio: [0xfdd00000-0xfddfffff]
>pci 0000:00:0a.0: bridge 64bit mmio pref: [0xfdf00000-0xfdffffff]
>pci 0000:03:0e.0: reg 10 32bit mmio: [0xfdcff000-0xfdcff7ff]
>pci 0000:03:0e.0: reg 14 32bit mmio: [0xfdcf8000-0xfdcfbfff]
>pci 0000:03:0e.0: supports D1 D2
>pci 0000:03:0e.0: PME# supported from D0 D1 D2 D3hot
>pci 0000:03:0e.0: PME# disabled
>pci 0000:00:14.4: transparent bridge
>pci 0000:00:14.4: bridge io port: [0xc000-0xcfff]
>pci 0000:00:14.4: bridge 32bit mmio: [0xfdc00000-0xfdcfffff]
>pci 0000:00:14.4: bridge 32bit mmio pref: [0xfdb00000-0xfdbfffff]
>pci_bus 0000:00: on NUMA node 0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>SCSI subsystem initialized
>libata version 3.00 loaded.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>raid6: int64x1   1261 MB/s
>raid6: int64x2   2046 MB/s
>raid6: int64x4   1671 MB/s
>raid6: int64x8   1550 MB/s
>raid6: sse2x1    2640 MB/s
>raid6: sse2x2    3566 MB/s
>raid6: sse2x4    3714 MB/s
>raid6: using algorithm sse2x4 (3714 MB/s)
>PCI: Using ACPI for IRQ routing
>PCI-DMA: Disabling AGP.
>PCI-DMA: aperture base @ 20000000 size 65536 KB
>PCI-DMA: using GART IOMMU.
>PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
>hpet0: 4 comparators, 32-bit 14.318180 MHz counter
>Switched to high resolution mode on CPU 0
>Switched to high resolution mode on CPU 1
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp 00:09: mem resource (0xe0000000-0xefffffff) overlaps 0000:00:00.0 BAR 3 (0xe0000000-0xffffffff), disabling
>pnp 00:0a: mem resource (0xffff0000-0xffffffff) overlaps 0000:00:00.0 BAR 3 (0xe0000000-0xffffffff), disabling
>pnp 00:0a: mem resource (0xfec00000-0xfec00fff) overlaps 0000:00:00.0 BAR 3 (0xe0000000-0xffffffff), disabling
>pnp 00:0a: mem resource (0xfee00000-0xfee00fff) overlaps 0000:00:00.0 BAR 3 (0xe0000000-0xffffffff), disabling
>pnp 00:0a: mem resource (0xfff80000-0xfffeffff) overlaps 0000:00:00.0 BAR 3 (0xe0000000-0xffffffff), disabling
>pnp: PnP ACPI: found 11 devices
>ACPI: ACPI bus type pnp unregistered
>system 00:01: ioport range 0x4d0-0x4d1 has been reserved
>system 00:01: ioport range 0x220-0x225 has been reserved
>system 00:01: ioport range 0x290-0x294 has been reserved
>system 00:02: ioport range 0x4100-0x411f has been reserved
>system 00:02: ioport range 0x228-0x22f has been reserved
>system 00:02: ioport range 0x40b-0x40b has been reserved
>system 00:02: ioport range 0x4d6-0x4d6 has been reserved
>system 00:02: ioport range 0xc00-0xc01 has been reserved
>system 00:02: ioport range 0xc14-0xc14 has been reserved
>system 00:02: ioport range 0xc50-0xc52 has been reserved
>system 00:02: ioport range 0xc6c-0xc6d has been reserved
>system 00:02: ioport range 0xc6f-0xc6f has been reserved
>system 00:02: ioport range 0xcd0-0xcd1 has been reserved
>system 00:02: ioport range 0xcd2-0xcd3 has been reserved
>system 00:02: ioport range 0xcd4-0xcdf has been reserved
>system 00:02: ioport range 0x4000-0x40fe has been reserved
>system 00:02: ioport range 0x4210-0x4217 has been reserved
>system 00:02: ioport range 0xb00-0xb1f could not be reserved
>system 00:02: ioport range 0x238-0x23f has been reserved
>system 00:0a: iomem range 0xf0000-0xf3fff could not be reserved
>system 00:0a: iomem range 0xf4000-0xf7fff could not be reserved
>system 00:0a: iomem range 0xf8000-0xfbfff could not be reserved
>system 00:0a: iomem range 0xfc000-0xfffff could not be reserved
>system 00:0a: iomem range 0xd7ee0000-0xd7efffff could not be reserved
>system 00:0a: iomem range 0x0-0x9ffff could not be reserved
>system 00:0a: iomem range 0x100000-0xd7edffff could not be reserved
>pci 0000:00:02.0: PCI bridge, secondary bus 0000:01
>pci 0000:00:02.0:   IO window: 0xd000-0xdfff
>pci 0000:00:02.0:   MEM window: 0xfde00000-0xfdefffff
>pci 0000:00:02.0:   PREFETCH window: 0x000000d8000000-0x000000dfffffff
>pci 0000:00:0a.0: PCI bridge, secondary bus 0000:02
>pci 0000:00:0a.0:   IO window: 0xe000-0xefff
>pci 0000:00:0a.0:   MEM window: 0xfdd00000-0xfddfffff
>pci 0000:00:0a.0:   PREFETCH window: 0x000000fdf00000-0x000000fdffffff
>pci 0000:00:14.4: PCI bridge, secondary bus 0000:03
>pci 0000:00:14.4:   IO window: 0xc000-0xcfff
>pci 0000:00:14.4:   MEM window: 0xfdc00000-0xfdcfffff
>pci 0000:00:14.4:   PREFETCH window: 0xfdb00000-0xfdbfffff
>pci 0000:00:02.0: setting latency timer to 64
>pci 0000:00:0a.0: setting latency timer to 64
>pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
>pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
>pci_bus 0000:01: resource 0 io:  [0xd000-0xdfff]
>pci_bus 0000:01: resource 1 mem: [0xfde00000-0xfdefffff]
>pci_bus 0000:01: resource 2 pref mem [0xd8000000-0xdfffffff]
>pci_bus 0000:02: resource 0 io:  [0xe000-0xefff]
>pci_bus 0000:02: resource 1 mem: [0xfdd00000-0xfddfffff]
>pci_bus 0000:02: resource 2 pref mem [0xfdf00000-0xfdffffff]
>pci_bus 0000:03: resource 0 io:  [0xc000-0xcfff]
>pci_bus 0000:03: resource 1 mem: [0xfdc00000-0xfdcfffff]
>pci_bus 0000:03: resource 2 pref mem [0xfdb00000-0xfdbfffff]
>pci_bus 0000:03: resource 3 io:  [0x00-0xffff]
>pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffffffffffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 262144 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>Scanning for low memory corruption every 60 seconds
>Intel AES-NI instructions are not detected.
>HugeTLB registered 2 MB page size, pre-allocated 0 pages
>VFS: Disk quotas dquot_6.5.2
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>fuse init (API version 7.12)
>JFS: nTxBlock = 8192, nTxLock = 65536
>msgmni has been set to 7912
>alg: No test for cipher_null (cipher_null-generic)
>alg: No test for ecb(cipher_null) (ecb-cipher_null)
>alg: No test for digest_null (digest_null-generic)
>alg: No test for compress_null (compress_null-generic)
>alg: No test for fcrypt (fcrypt-generic)
>alg: No test for stdrng (krng)
>alg: No test for stdrng (ansi_cprng)
>async_tx: api initialized (async)
>io scheduler noop registered
>io scheduler cfq registered (default)
>pci 0000:01:00.0: Boot video device
>pcieport-driver 0000:00:02.0: irq 24 for MSI/MSI-X
>pcieport-driver 0000:00:02.0: setting latency timer to 64
>pcieport-driver 0000:00:0a.0: irq 25 for MSI/MSI-X
>pcieport-driver 0000:00:0a.0: setting latency timer to 64
>input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
>ACPI: Power Button [PWRF]
>input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
>ACPI: Power Button [PWRB]
>processor LNXCPU:00: registered as cooling_device0
>processor LNXCPU:01: registered as cooling_device1
>Linux agpgart interface v0.103
>Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>Platform driver 'serial8250' needs updating - please use dev_pm_ops
>00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>brd: module loaded
>loop: module loaded
>Uniform Multi-Platform E-IDE driver
>ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
>ide-gd driver 1.18
>ide-cd driver 5.00
>ahci 0000:00:12.0: version 3.0
>ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
>ahci 0000:00:12.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part 
>scsi0 : ahci
>scsi1 : ahci
>scsi2 : ahci
>scsi3 : ahci
>ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22
>ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22
>ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22
>ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
>pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>scsi4 : pata_atiixp
>scsi5 : pata_atiixp
>ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf900 irq 14
>ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf908 irq 15
>r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
>r8169 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>r8169 0000:02:00.0: setting latency timer to 64
>r8169 0000:02:00.0: irq 26 for MSI/MSI-X
>eth0: RTL8168b/8111b at 0xffffc90000044000, 00:1d:7d:01:db:41, XID 38000000 IRQ 26
>console [netcon0] enabled
>netconsole: network logging started
>firewire_ohci 0000:03:0e.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>firewire_ohci: Added fw-ohci device 0000:03:0e.0, OHCI version 1.10
>usbmon: debugfs is not available
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ehci_hcd 0000:00:13.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19
>ehci_hcd 0000:00:13.5: EHCI Host Controller
>ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround
>ehci_hcd 0000:00:13.5: debug port 1
>ehci_hcd 0000:00:13.5: irq 19, io mem 0xfe029000
>ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.31-rc3-git3 ehci_hcd
>usb usb1: SerialNumber: 0000:00:13.5
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 10 ports detected
>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>ohci_hcd 0000:00:13.0: OHCI Host Controller
>ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:13.0: irq 16, io mem 0xfe02e000
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: OHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.31-rc3-git3 ohci_hcd
>usb usb2: SerialNumber: 0000:00:13.0
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>ohci_hcd 0000:00:13.1: OHCI Host Controller
>ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
>ohci_hcd 0000:00:13.1: irq 17, io mem 0xfe02d000
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: OHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.31-rc3-git3 ohci_hcd
>usb usb3: SerialNumber: 0000:00:13.1
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>ohci_hcd 0000:00:13.2: OHCI Host Controller
>ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
>ohci_hcd 0000:00:13.2: irq 18, io mem 0xfe02c000
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: OHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.31-rc3-git3 ohci_hcd
>usb usb4: SerialNumber: 0000:00:13.2
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>ohci_hcd 0000:00:13.3: OHCI Host Controller
>ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5
>ohci_hcd 0000:00:13.3: irq 17, io mem 0xfe02b000
>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: OHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.31-rc3-git3 ohci_hcd
>usb usb5: SerialNumber: 0000:00:13.3
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>ohci_hcd 0000:00:13.4: OHCI Host Controller
>ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6
>ohci_hcd 0000:00:13.4: irq 18, io mem 0xfe02a000
>ata4: SATA link down (SStatus 0 SControl 300)
>ata3: SATA link down (SStatus 0 SControl 300)
>ata2: SATA link down (SStatus 0 SControl 300)
>usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb6: Product: OHCI Host Controller
>usb usb6: Manufacturer: Linux 2.6.31-rc3-git3 ohci_hcd
>usb usb6: SerialNumber: 0000:00:13.4
>usb usb6: configuration #1 chosen from 1 choice
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 2 ports detected
>uhci_hcd: USB Universal Host Controller Interface driver
>usbcore: registered new interface driver cdc_acm
>cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
>usbcore: registered new interface driver usblp
>Initializing USB Mass Storage driver...
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>usbcore: registered new interface driver libusual
>PNP: No PS/2 controller found. Probing ports directly.
>Platform driver 'i8042' needs updating - please use dev_pm_ops
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>rtc_cmos 00:05: RTC can wake from S4
>rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
>piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
>md: raid6 personality registered for level 6
>md: raid5 personality registered for level 5
>md: raid4 personality registered for level 4
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
>cpuidle: using governor ladder
>cpuidle: using governor menu
>HIFN supports only 32-bit addresses.
>usbcore: registered new interface driver usbhid
>usbhid: v2.6:USB HID core driver
>Advanced Linux Sound Architecture Driver Version 1.0.20.
>HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input2
>ALSA device list:
>  #0: HDA ATI SB at 0xfe024000 irq 16
>TCP cubic registered
>NET: Registered protocol family 10
>IPv6 over IPv4 tunneling driver
>NET: Registered protocol family 17
>powernow-k8: Found 1 AMD Athlon(tm) X2 Dual Core Processor BE-2300 processors (2 cpu cores) (version 2.20.00)
>powernow-k8:    0 : fid 0xb (1900 MHz), vid 0xc
>powernow-k8:    1 : fid 0xa (1800 MHz), vid 0xd
>powernow-k8:    2 : fid 0x2 (1000 MHz), vid 0x16
>rtc_cmos 00:05: setting system clock to 2009-07-29 07:22:21 UTC (1248852141)
>ata1: softreset failed (device not ready)
>ata1: failed due to HW bug, retry pmp=0
>usb 3-2: new low speed USB device using ohci_hcd and address 2
>firewire_core: created device fw0: GUID 00cee06100001a4d, S400
>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata1.00: HPA detected: current 312579695, native 312581808
>ata1.00: ATA-7: SAMSUNG HD161HJ, JF100-19, max UDMA7
>ata1.00: 312579695 sectors, multi 16: LBA48 NCQ (depth 31/32)
>ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
>ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
>ata1.00: configured for UDMA/133
>scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG HD161HJ  JF10 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 312579695 512-byte logical blocks: (160 GB/149 GiB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda:
>sd 0:0:0:0: Attached scsi generic sg0 type 0
> sda1 sda2 sda3 sda4 < sda5
>usb 3-2: New USB device found, idVendor=046d, idProduct=c517
>usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 3-2: Product: USB Receiver
>usb 3-2: Manufacturer: Logitech
>usb 3-2: configuration #1 chosen from 1 choice
>input: Logitech USB Receiver as /devices/pci0000:00/0000:00:13.1/usb3/3-2/3-2:1.0/input/input3
>logitech 0003:046D:C517.0001: input: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:13.1-2/input0
> sda6
>logitech 0003:046D:C517.0002: fixing up Logitech keyboard report descriptor
>input: Logitech USB Receiver as /devices/pci0000:00/0000:00:13.1/usb3/3-2/3-2:1.1/input/input4
>logitech 0003:046D:C517.0002: input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:13.1-2/input1
> sda7 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>md: Waiting for all devices to be available before autodetect
>md: If you don't use raid, use raid=noautodetect
>md: Autodetecting RAID arrays.
>md: Scanned 0 and added 0 devices.
>md: autorun ...
>md: ... autorun DONE.
>REISERFS (device sda2): found reiserfs format "3.6" with standard journal
>REISERFS (device sda2): using ordered data mode
>REISERFS (device sda2): journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>REISERFS (device sda2): checking transaction log (sda2)
>REISERFS (device sda2): Using r5 hash to sort names
>VFS: Mounted root (reiserfs filesystem) readonly on device 8:2.
>Freeing unused kernel memory: 496k freed
>udev: starting version 141
>k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
>[drm] Initialized drm 1.1.0 20060810
>[drm] radeon default to kernel modesetting.
>[drm] radeon kernel modesetting enabled.
>radeon 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>radeon 0000:01:00.0: setting latency timer to 64
>[drm] radeon: Initializing kernel modesetting.
>[drm] register mmio base: 0xFDEF0000
>[drm] register mmio size: 65536
>[drm] GPU reset succeed (RBBM_STATUS=0x00000140)
>[drm] Detected VRAM RAM=128M, BAR=128M
>[drm] RAM width 128bits DDR
>[drm] Clocks initialized !
>[drm] radeon: 1 pipes initialized.
>[drm] radeon: VRAM 128M
>[drm] radeon: VRAM from 0x00000000 to 0x07FFFFFF
>[drm] radeon: GTT 512M
>[drm] radeon: GTT from 0x08000000 to 0x27FFFFFF
>[drm] radeon: irq initialized.
>[TTM] TTM available graphics memory: 1978 MiB
>[TTM] TTM available object memory: 1978 MiB
>[drm] radeon: 128M of VRAM memory ready
>[drm] radeon: 512M of GTT memory ready.
>[drm] GART: num cpu pages 131072, num gpu pages 131072
>[drm] PCIE GART of 512M enabled (table at 0x00040000).
>[drm] radeon: cp idle (0x10000C03)
>[drm] Loading R300 Microcode
>[drm] radeon: ring at 0x0000000008000000
>[drm] ring test succeeded in 1 usecs
>[drm] radeon: ib pool ready.
>[drm] ib test succeeded in 0 usecs
>[drm] Default TV standard: NTSC
>[drm] 27.000000000 MHz TV ref clk
>[drm] DFP table revision: 4
>[drm] Radeon Display Connectors
>[drm] Connector 0:
>[drm]   VGA
>[drm]   DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
>[drm]   Encoders:
>[drm]     CRT1: INTERNAL_DAC1
>[drm] Connector 1:
>[drm]   DVI-I
>[drm]   DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
>[drm]   Encoders:
>[drm]     CRT2: INTERNAL_DAC2
>[drm]     DFP1: INTERNAL_TMDS1
>i2c-adapter i2c-2: unable to read EDID block.
>radeon 0000:01:00.0: DVI-I-1: no EDID data
>[drm] fb mappable at 0xD80C0000
>[drm] vram apper at 0xD8000000
>[drm] size 8294400
>[drm] fb depth is 24
>[drm]    pitch is 7680
>fb0: radeondrmfb frame buffer device
>registered panic notifier
>[drm] radeon: kernel modesetting successfully initialized.
>[drm] Initialized radeon 2.0.0 20080528 for 0000:01:00.0 on minor 0
>REISERFS (device sda7): found reiserfs format "3.6" with standard journal
>REISERFS (device sda7): using ordered data mode
>REISERFS (device sda7): journal params: device sda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>REISERFS (device sda7): checking transaction log (sda7)
>REISERFS (device sda7): Using r5 hash to sort names
>REISERFS (device sda6): found reiserfs format "3.6" with standard journal
>REISERFS (device sda6): using ordered data mode
>REISERFS (device sda6): journal params: device sda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>REISERFS (device sda6): checking transaction log (sda6)
>REISERFS (device sda6): Using r5 hash to sort names
>REISERFS (device loop0): found reiserfs format "3.6" with standard journal
>REISERFS (device loop0): using ordered data mode
>REISERFS (device loop0): journal params: device loop0, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>REISERFS (device loop0): checking transaction log (loop0)
>REISERFS (device loop0): Using r5 hash to sort names
>r8169: eth0: link up
>r8169: eth0: link up
>Adding 3911816k swap on /dev/sda3.  Priority:-1 extents:1 across:3911816k 
>it87: Found IT8718F chip at 0x228, revision 4
>it87: in3 is VCC (+5V)
>eth0: no IPv6 routers present

Actions: View

Attachments on bug 23009: 28131 | 28139 | 28140

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.