Attachment 29266 Details for Bug 23741 – kernel log

kernel log

dmesg.txt (text/plain), 46.68 KB, created by Pekka Paalanen on 2009-09-06 04:28:53 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Pekka Paalanen

Created: 2009-09-06 04:28:53 UTC

Size: 46.68 KB

patch

obsolete

>[    0.000000] BIOS EBDA/lowmem at: 0009fc00/0009d800
>[    0.000000] Linux version 2.6.28-gentoo-r5 (root@daedalus) (gcc version 4.1.2 (Gentoo 4.1.2)) #5 PREEMPT Fri Aug 14 21:55:41 EEST 2009
>[    0.000000] Command line: root=/dev/sda5 fbcon=scrollback:256k
>[    0.000000] KERNEL supported cpus:
>[    0.000000]   Intel GenuineIntel
>[    0.000000]   AMD AuthenticAMD
>[    0.000000]   Centaur CentaurHauls
>[    0.000000] BIOS-provided physical RAM map:
>[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
>[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
>[    0.000000]  BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
>[    0.000000]  BIOS-e820: 0000000000100000 - 000000003ffb0000 (usable)
>[    0.000000]  BIOS-e820: 000000003ffb0000 - 000000003ffc0000 (ACPI data)
>[    0.000000]  BIOS-e820: 000000003ffc0000 - 000000003fff0000 (ACPI NVS)
>[    0.000000]  BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved)
>[    0.000000]  BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
>[    0.000000] DMI 2.3 present.
>[    0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working it around.
>[    0.000000] last_pfn = 0x3ffb0 max_arch_pfn = 0x3ffffffff
>[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>[    0.000000] init_memory_mapping: 0000000000000000-000000003ffb0000
>[    0.000000]  0000000000 - 003fe00000 page 2M
>[    0.000000]  003fe00000 - 003ffb0000 page 4k
>[    0.000000] kernel direct mapping tables up to 3ffb0000 @ 10000-13000
>[    0.000000] last_map_addr: 3ffb0000 end: 3ffb0000
>[    0.000000] ACPI: RSDP 000FA7C0, 0021 (r2 ACPIAM)
>[    0.000000] ACPI: XSDT 3FFB0100, 003C (r1 A M I  OEMXSDT  11000514 MSFT       97)
>[    0.000000] ACPI: FACP 3FFB0290, 00F4 (r3 A M I  OEMFACP  11000514 MSFT       97)
>[    0.000000] ACPI: DSDT 3FFB03F0, 3A3E (r1  A0036 A0036001        1 MSFT  100000D)
>[    0.000000] ACPI: FACS 3FFC0000, 0040
>[    0.000000] ACPI: APIC 3FFB0390, 0052 (r1 A M I  OEMAPIC  11000514 MSFT       97)
>[    0.000000] ACPI: OEMB 3FFC0040, 003F (r1 A M I  OEMBIOS  11000514 MSFT       97)
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] (5 early reservations) ==> bootmem [0000000000 - 003ffb0000]
>[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
>[    0.000000]   #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
>[    0.000000]   #2 [0000200000 - 000074cd8c]    TEXT DATA BSS ==> [0000200000 - 000074cd8c]
>[    0.000000]   #3 [000009d800 - 0000100000]    BIOS reserved ==> [000009d800 - 0000100000]
>[    0.000000]   #4 [0000010000 - 0000011000]          PGTABLE ==> [0000010000 - 0000011000]
>[    0.000000]  [ffffe20000000000-ffffe20000dfffff] PMD -> [ffff880001200000-ffff880001ffffff] on node 0
>[    0.000000] Zone PFN ranges:
>[    0.000000]   DMA      0x00000010 -> 0x00001000
>[    0.000000]   DMA32    0x00001000 -> 0x00100000
>[    0.000000]   Normal   0x00100000 -> 0x00100000
>[    0.000000] Movable zone start PFN for each node
>[    0.000000] early_node_map[2] active PFN ranges
>[    0.000000]     0: 0x00000010 -> 0x0000009f
>[    0.000000]     0: 0x00000100 -> 0x0003ffb0
>[    0.000000] On node 0 totalpages: 261951
>[    0.000000]   DMA zone: 56 pages used for memmap
>[    0.000000]   DMA zone: 1458 pages reserved
>[    0.000000]   DMA zone: 2469 pages, LIFO batch:0
>[    0.000000]   DMA32 zone: 3527 pages used for memmap
>[    0.000000]   DMA32 zone: 254441 pages, LIFO batch:31
>[    0.000000]   Normal zone: 0 pages used for memmap
>[    0.000000]   Movable zone: 0 pages used for memmap
>[    0.000000] Detected use of extended apic ids on hypertransport bus
>[    0.000000] ACPI: PM-Timer IO Port: 0x808
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
>[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>[    0.000000] IOAPIC[0]: apic_id 1, version 0, address 0xfec00000, GSI 0-23
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>[    0.000000] ACPI: IRQ0 used by override.
>[    0.000000] ACPI: IRQ2 used by override.
>[    0.000000] ACPI: IRQ9 used by override.
>[    0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bf780000)
>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 256910
>[    0.000000] Kernel command line: root=/dev/sda5 fbcon=scrollback:256k
>[    0.000000] Initializing CPU#0
>[    0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
>[    0.000000] Extended CMOS year: 2000
>[    0.000000] TSC: PIT calibration matches PMTIMER. 1 loops
>[    0.000000] Detected 1802.312 MHz processor.
>[    0.000999] Console: colour VGA+ 80x25
>[    0.000999] console [tty0] enabled
>[    0.000999] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
>[    0.000999] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
>[    0.000999] Checking aperture...
>[    0.000999] AGP bridge at 00:00:00
>[    0.000999] Aperture from AGP @ e8000000 old size 32 MB
>[    0.000999] Aperture from AGP @ e8000000 size 64 MB (APSIZE f30)
>[    0.000999] Node 0: aperture @ e8000000 size 64 MB
>[    0.000999] Memory: 1025772k/1048256k available (2867k kernel code, 452k absent, 21408k reserved, 1611k data, 292k init)
>[    0.001011] Calibrating delay loop (skipped), value calculated using timer frequency.. 3604.62 BogoMIPS (lpj=1802312)
>[    0.001162] Security Framework initialized
>[    0.001239] Mount-cache hash table entries: 256
>[    0.001442] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>[    0.001503] CPU: L2 Cache: 512K (64 bytes/line)
>[    0.001561] tseg: 0000000000
>[    0.001579] CPU: AMD Athlon(tm) 64 Processor 3000+ stepping 02
>[    0.001737] ACPI: Core revision 20080926
>[    0.007664] Setting APIC routing to flat
>[    0.007998] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
>[    0.017997] net_namespace: 1264 bytes
>[    0.017997] NET: Registered protocol family 16
>[    0.017997] node 0 link 0: io port [1000, ffffff]
>[    0.017997] TOM: 0000000040000000 aka 1024M
>[    0.017997] node 0 link 0: mmio [a0000, bffff]
>[    0.017997] node 0 link 0: mmio [40000000, ffffffff]
>[    0.017997] bus: [00,ff] on node 0 link 0
>[    0.017997] bus: 00 index 0 io port: [0, ffff]
>[    0.017997] bus: 00 index 1 mmio: [a0000, bffff]
>[    0.017997] bus: 00 index 2 mmio: [40000000, fcffffffff]
>[    0.017997] ACPI: bus type pci registered
>[    0.017997] PCI: Using configuration type 1 for base access
>[    0.019931] ACPI: EC: Look up EC in DSDT
>[    0.027350] ACPI: Interpreter enabled
>[    0.027411] ACPI: (supports S0 S1 S3 S5)
>[    0.027653] ACPI: Using IOAPIC for interrupt routing
>[    0.036736] ACPI: No dock devices found.
>[    0.036805] ACPI: PCI Root Bridge [PCI0] (0000:00)
>[    0.036943] pci 0000:00:00.0: reg 10 32bit mmio: [0xe8000000-0xebffffff]
>[    0.037181] pci 0000:00:01.0: supports D1
>[    0.037214] pci 0000:00:07.0: reg 10 32bit mmio: [0xfaa00000-0xfaa007ff]
>[    0.037220] pci 0000:00:07.0: reg 14 io port: [0xa000-0xa07f]
>[    0.037247] pci 0000:00:07.0: supports D2
>[    0.037249] pci 0000:00:07.0: PME# supported from D2 D3hot D3cold
>[    0.037311] pci 0000:00:07.0: PME# disabled
>[    0.037388] pci 0000:00:09.0: reg 10 32bit mmio: [0xeff00000-0xeff00fff]
>[    0.037444] pci 0000:00:0a.0: reg 10 32bit mmio: [0xfac00000-0xfac03fff]
>[    0.037450] pci 0000:00:0a.0: reg 14 io port: [0xa400-0xa4ff]
>[    0.037470] pci 0000:00:0a.0: reg 30 32bit mmio: [0xfab00000-0xfab1ffff]
>[    0.037479] pci 0000:00:0a.0: supports D1 D2
>[    0.037482] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
>[    0.037543] pci 0000:00:0a.0: PME# disabled
>[    0.037621] pci 0000:00:0d.0: reg 10 io port: [0xa800-0xa81f]
>[    0.037663] pci 0000:00:0e.0: reg 10 32bit mmio: [0xf9000000-0xf9ffffff]
>[    0.037670] pci 0000:00:0e.0: reg 14 io port: [0xb000-0xb0ff]
>[    0.037690] pci 0000:00:0e.0: reg 30 32bit mmio: [0xf8000000-0xf8ffffff]
>[    0.037720] pci 0000:00:0f.0: reg 10 io port: [0xd000-0xd007]
>[    0.037726] pci 0000:00:0f.0: reg 14 io port: [0xc800-0xc803]
>[    0.037733] pci 0000:00:0f.0: reg 18 io port: [0xc400-0xc407]
>[    0.037739] pci 0000:00:0f.0: reg 1c io port: [0xc000-0xc003]
>[    0.037745] pci 0000:00:0f.0: reg 20 io port: [0xb800-0xb80f]
>[    0.037751] pci 0000:00:0f.0: reg 24 io port: [0xb400-0xb4ff]
>[    0.037804] pci 0000:00:0f.1: reg 20 io port: [0xfc00-0xfc0f]
>[    0.037868] pci 0000:00:10.0: reg 20 io port: [0xd400-0xd41f]
>[    0.037883] pci 0000:00:10.0: supports D1 D2
>[    0.037886] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
>[    0.037947] pci 0000:00:10.0: PME# disabled
>[    0.038036] pci 0000:00:10.1: reg 20 io port: [0xd800-0xd81f]
>[    0.038052] pci 0000:00:10.1: supports D1 D2
>[    0.038054] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
>[    0.038116] pci 0000:00:10.1: PME# disabled
>[    0.038213] pci 0000:00:10.2: reg 20 io port: [0xe000-0xe01f]
>[    0.038229] pci 0000:00:10.2: supports D1 D2
>[    0.038231] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
>[    0.038293] pci 0000:00:10.2: PME# disabled
>[    0.038390] pci 0000:00:10.3: reg 20 io port: [0xe400-0xe41f]
>[    0.038405] pci 0000:00:10.3: supports D1 D2
>[    0.038408] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
>[    0.038469] pci 0000:00:10.3: PME# disabled
>[    0.038552] pci 0000:00:10.4: reg 10 32bit mmio: [0xfae00000-0xfae000ff]
>[    0.038583] pci 0000:00:10.4: supports D1 D2
>[    0.038585] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
>[    0.038646] pci 0000:00:10.4: PME# disabled
>[    0.038756] HPET not enabled in BIOS. You might try hpet=force boot option
>[    0.038819] pci 0000:00:11.0: Enabled onboard AC97/MC97 devices
>[    0.038914] pci 0000:00:11.5: reg 10 io port: [0xe800-0xe8ff]
>[    0.038944] pci 0000:00:11.5: supports D1 D2
>[    0.038973] pci 0000:00:11.6: reg 10 io port: [0x00-0xff]
>[    0.039113] pci 0000:01:00.0: reg 10 32bit mmio: [0xfb000000-0xfbffffff]
>[    0.039118] pci 0000:01:00.0: reg 14 32bit mmio: [0xf0000000-0xf7ffffff]
>[    0.039131] pci 0000:01:00.0: reg 30 32bit mmio: [0xfaf00000-0xfaf1ffff]
>[    0.039162] pci 0000:00:01.0: bridge 32bit mmio: [0xfaf00000-0xfbffffff]
>[    0.039166] pci 0000:00:01.0: bridge 32bit mmio pref: [0xf0000000-0xf7ffffff]
>[    0.039173] bus 00 -> node 0
>[    0.039181] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>[    0.049757] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 14 15)
>[    0.050330] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 10 11 14 15)
>[    0.050925] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 14 15)
>[    0.051547] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 10 11 14 15)
>[    0.052155] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
>[    0.052844] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
>[    0.053507] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
>[    0.054207] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
>[    0.054928] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - F8, should be C8 [20080926]
>[    0.055289] SCSI subsystem initialized
>[    0.055373] libata version 3.00 loaded.
>[    0.055469] usbcore: registered new interface driver usbfs
>[    0.055562] usbcore: registered new interface driver hub
>[    0.055660] usbcore: registered new device driver usb
>[    0.055848] PCI: Using ACPI for IRQ routing
>[    0.055912] pci 0000:00:00.0: BAR 0: can't allocate resource
>[    0.060050] agpgart-amd64 0000:00:00.0: AGP bridge [1106/0282]
>[    0.062391] agpgart-amd64 0000:00:00.0: AGP aperture is 64M @ 0xe8000000
>[    0.065006] pnp: PnP ACPI init
>[    0.065069] ACPI: bus type pnp registered
>[    0.067572] pnp 00:09: io resource (0x10-0x1f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
>[    0.067645] pnp 00:09: io resource (0x22-0x3f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
>[    0.067717] pnp 00:09: io resource (0x44-0x5f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
>[    0.067789] pnp 00:09: io resource (0x62-0x63) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
>[    0.067861] pnp 00:09: io resource (0x65-0x6f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
>[    0.067932] pnp 00:09: io resource (0x72-0x7f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
>[    0.068013] pnp 00:09: io resource (0x80-0x80) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
>[    0.068085] pnp 00:09: io resource (0x84-0x86) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
>[    0.068157] pnp 00:09: io resource (0x88-0x88) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
>[    0.068228] pnp 00:09: io resource (0x8c-0x8e) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
>[    0.068300] pnp 00:09: io resource (0x90-0x9f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
>[    0.068372] pnp 00:09: io resource (0xa2-0xbf) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
>[    0.068444] pnp 00:09: io resource (0xe0-0xef) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
>[    0.071217] pnp 00:0f: mem resource (0x0-0x9ffff) overlaps 0000:00:00.0 BAR 0 (0x0-0x3ffffff), disabling
>[    0.071291] pnp 00:0f: mem resource (0xc0000-0xdffff) overlaps 0000:00:00.0 BAR 0 (0x0-0x3ffffff), disabling
>[    0.071364] pnp 00:0f: mem resource (0xe0000-0xfffff) overlaps 0000:00:00.0 BAR 0 (0x0-0x3ffffff), disabling
>[    0.071437] pnp 00:0f: mem resource (0x100000-0x3ffeffff) overlaps 0000:00:00.0 BAR 0 (0x0-0x3ffffff), disabling
>[    0.071886] pnp: PnP ACPI: found 16 devices
>[    0.071946] ACPI: ACPI bus type pnp unregistered
>[    0.072021] system 00:08: ioport range 0x680-0x6ff has been reserved
>[    0.072081] system 00:08: ioport range 0x290-0x297 has been reserved
>[    0.072145] system 00:09: ioport range 0x3e1-0x3e7 has been reserved
>[    0.072205] system 00:09: ioport range 0x4d0-0x4d1 has been reserved
>[    0.072265] system 00:09: ioport range 0x800-0x87f has been reserved
>[    0.072325] system 00:09: ioport range 0x400-0x41f has been reserved
>[    0.072389] system 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved
>[    0.072450] system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved
>[    0.072511] system 00:0a: iomem range 0xfff80000-0xffffffff has been reserved
>[    0.077240] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
>[    0.077299] pci 0000:00:01.0:   IO window: disabled
>[    0.077359] pci 0000:00:01.0:   MEM window: 0xfaf00000-0xfbffffff
>[    0.077420] pci 0000:00:01.0:   PREFETCH window: 0x000000f0000000-0x000000f7ffffff
>[    0.077500] pci 0000:00:01.0: setting latency timer to 64
>[    0.077504] bus: 00 index 0 io port: [0x00-0xffff]
>[    0.077562] bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff]
>[    0.077621] bus: 01 index 0 mmio: [0x0-0x0]
>[    0.077679] bus: 01 index 1 mmio: [0xfaf00000-0xfbffffff]
>[    0.080272] bus: 01 index 2 mmio: [0xf0000000-0xf7ffffff]
>[    0.080330] bus: 01 index 3 mmio: [0x0-0x0]
>[    0.080413] NET: Registered protocol family 2
>[    0.090021] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
>[    0.090389] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
>[    0.092193] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>[    0.092723] TCP: Hash tables configured (established 131072 bind 65536)
>[    0.092784] TCP reno registered
>[    0.095052] NET: Registered protocol family 1
>[    0.096022] msgmni has been set to 2004
>[    0.096106] alg: No test for stdrng (krng)
>[    0.096171] io scheduler noop registered
>[    0.096228] io scheduler anticipatory registered
>[    0.096286] io scheduler deadline registered
>[    0.096352] io scheduler cfq registered (default)
>[    0.096420] PCI: VIA PCI bridge detected.Disabling DAC.
>[    0.579917] Switched to high resolution mode on CPU 0
>[    5.594005] pci 0000:00:10.4: EHCI: BIOS handoff failed (BIOS bug?) 01010001
>[    5.594184] pci 0000:01:00.0: Boot video device
>[    5.596611] lp: driver loaded but no devices found
>[    5.596716] Real Time Clock Driver v1.12ac
>[    5.596851] Linux agpgart interface v0.103
>[    5.596993] Serial: 8250/16550 driver4 ports, IRQ sharing disabled
>[    5.597227] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>[    5.597385] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>[    5.597794] 00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>[    5.598005] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>[    5.598277] parport_pc 00:07: reported by Plug and Play ACPI
>[    5.598372] parport0: PC-style at 0x378, irq 7 [PCSPP]
>[    5.680052] lp0: using parport0 (interrupt-driven).
>[    5.680413] Floppy drive(s): fd0 is 1.44M
>[    5.695178] FDC 0 is a post-1991 82077
>[    5.698177] brd: module loaded
>[    5.698848] loop: module loaded
>[    5.698910] Uniform Multi-Platform E-IDE driver
>[    5.699072] via82cxxx 0000:00:0f.1: VIA vt8237 (rev 00) IDE UDMA133
>[    5.699134] via82cxxx 0000:00:0f.1: IDE controller (0x1106:0x0571 rev 0x06)
>[    5.699211] pci 0000:00:0f.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>[    5.699309] via82cxxx 0000:00:0f.1: not 100% native mode: will probe irqs later
>[    5.699382]     ide0: BM-DMA at 0xfc00-0xfc07
>[    5.699447]     ide1: BM-DMA at 0xfc08-0xfc0f
>[    5.699508] Probing IDE interface ide0...
>[    6.218048] Probing IDE interface ide1...
>[    7.012095] hdc: PHILIPS CDRW1610A, ATAPI CD/DVD-ROM drive
>[    7.624043] hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4
>[    7.624280] hdc: UDMA/33 mode selected
>[    7.624771] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>[    7.624891] ide1 at 0x170-0x177,0x376 on irq 15
>[    7.625147] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
>[    7.625244] ide-gd driver 1.18
>[    7.625328] ide-cd driver 5.00
>[    7.626935] ide-cd: hdc: ATAPI 40X CD-ROM CD-R/RW drive, 8192kB Cache
>[    7.627213] Uniform CD-ROM driver Revision: 3.20
>[    7.631496] Driver 'sd' needs updating - please use bus_type methods
>[    7.631633] sata_via 0000:00:0f.0: version 2.4
>[    7.631643] sata_via 0000:00:0f.0: PCI INT B -> GSI 20 (level, low) -> IRQ 20
>[    7.631750] sata_via 0000:00:0f.0: routed to hard irq line 5
>[    7.631864] scsi0 : sata_via
>[    7.632033] scsi1 : sata_via
>[    7.632161] ata1: SATA max UDMA/133 cmd 0xd000 ctl 0xc800 bmdma 0xb800 irq 20
>[    7.632222] ata2: SATA max UDMA/133 cmd 0xc400 ctl 0xc000 bmdma 0xb808 irq 20
>[    7.833009] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[    7.988202] ata1.00: ATA-7: Maxtor 6V200E0, VA111630, max UDMA/133
>[    7.988262] ata1.00: 398297088 sectors, multi 16: LBA48 NCQ (depth 0/32)
>[    7.995213] ata1.00: configured for UDMA/133
>[    8.207008] ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
>[    8.228024] isa bounce pool size: 16 pages
>[    8.228146] scsi 0:0:0:0: Direct-Access     ATA      Maxtor 6V200E0   VA11 PQ: 0 ANSI: 5
>[    8.228369] sd 0:0:0:0: [sda] 398297088 512-byte hardware sectors: (203 GB/189 GiB)
>[    8.228452] sd 0:0:0:0: [sda] Write Protect is off
>[    8.228510] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[    8.228531] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    8.228661] sd 0:0:0:0: [sda] 398297088 512-byte hardware sectors: (203 GB/189 GiB)
>[    8.228741] sd 0:0:0:0: [sda] Write Protect is off
>[    8.228799] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[    8.228819] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    8.228892]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 >
>[    8.331128] sd 0:0:0:0: [sda] Attached SCSI disk
>[    8.331337] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
>[    8.331398] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
>[    8.331590] serio: i8042 KBD port at 0x60,0x64 irq 1
>[    8.331771] mice: PS/2 mouse device common for all mice
>[    8.331992] TCP cubic registered
>[    8.332085] NET: Registered protocol family 10
>[    8.332290] IPv6 over IPv4 tunneling driver
>[    8.332487] NET: Registered protocol family 17
>[    8.332548] NET: Registered protocol family 15
>[    8.356166] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
>[    8.458630] EXT3-fs: mounted filesystem with ordered data mode.
>[    8.458697] VFS: Mounted root (ext3 filesystem) readonly.
>[    8.458769] Freeing unused kernel memory: 292k freed
>[    8.458982] Write protecting the kernel read-only data: 4120k
>[    8.459296] kjournald starting.  Commit interval 5 seconds
>[   10.552572] udev: starting version 141
>[   10.647069] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
>[   10.651034] ACPI: Power Button (FF) [PWRF]
>[   10.651162] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
>[   10.656034] ACPI: Power Button (CM) [PWRB]
>[   10.656148] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
>[   10.660046] ACPI: Sleep Button (CM) [SLPB]
>[   10.691231] processor ACPI_CPU:00: registered as cooling_device0
>[   10.997964] skge 0000:00:0a.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>[   10.997977] skge 0000:00:0a.0: PCI: Disallowing DAC for device
>[   10.998029] skge 1.13 addr 0xfac00000 irq 17 chip Yukon-Lite rev 9
>[   10.998225] skge eth0: addr 00:11:d8:b1:88:dc
>[   11.024223] ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker
>[   11.024260] ne2k-pci 0000:00:0d.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>[   11.024466] eth1: RealTek RTL-8029 found at 0xa800, IRQ 18, 00:00:b4:b0:e5:5d.
>[   11.042468] sd 0:0:0:0: Attached scsi generic sg0 type 0
>[   11.274212] ohci1394 0000:00:07.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>[   11.336608] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>[   11.337569] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[16]  MMIO=[faa00000-faa007ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
>[   11.342673] ehci_hcd 0000:00:10.4: PCI INT C -> GSI 21 (level, low) -> IRQ 21
>[   11.342703] ehci_hcd 0000:00:10.4: EHCI Host Controller
>[   11.342766] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
>[   11.342824] ehci_hcd 0000:00:10.4: irq 21, io mem 0xfae00000
>[   11.348023] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00
>[   11.348138] usb usb1: configuration #1 chosen from 1 choice
>[   11.348171] hub 1-0:1.0: USB hub found
>[   11.348182] hub 1-0:1.0: 8 ports detected
>[   11.527958] uhci_hcd: USB Universal Host Controller Interface driver
>[   11.528019] uhci_hcd 0000:00:10.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
>[   11.528031] uhci_hcd 0000:00:10.0: UHCI Host Controller
>[   11.528084] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
>[   11.528110] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000d400
>[   11.528219] usb usb2: configuration #1 chosen from 1 choice
>[   11.528251] hub 2-0:1.0: USB hub found
>[   11.528260] hub 2-0:1.0: 2 ports detected
>[   11.528347] uhci_hcd 0000:00:10.1: PCI INT A -> GSI 21 (level, low) -> IRQ 21
>[   11.528353] uhci_hcd 0000:00:10.1: UHCI Host Controller
>[   11.528378] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
>[   11.528398] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000d800
>[   11.528476] usb usb3: configuration #1 chosen from 1 choice
>[   11.528505] hub 3-0:1.0: USB hub found
>[   11.528512] hub 3-0:1.0: 2 ports detected
>[   11.528592] uhci_hcd 0000:00:10.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21
>[   11.528598] uhci_hcd 0000:00:10.2: UHCI Host Controller
>[   11.528623] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
>[   11.528643] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000e000
>[   11.528721] usb usb4: configuration #1 chosen from 1 choice
>[   11.528749] hub 4-0:1.0: USB hub found
>[   11.528756] hub 4-0:1.0: 2 ports detected
>[   11.528836] uhci_hcd 0000:00:10.3: PCI INT B -> GSI 21 (level, low) -> IRQ 21
>[   11.528843] uhci_hcd 0000:00:10.3: UHCI Host Controller
>[   11.528866] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
>[   11.528886] uhci_hcd 0000:00:10.3: irq 21, io base 0x0000e400
>[   11.528964] usb usb5: configuration #1 chosen from 1 choice
>[   11.528992] hub 5-0:1.0: USB hub found
>[   11.528998] hub 5-0:1.0: 2 ports detected
>[   11.818428] [drm] Initialized drm 1.1.0 20060810
>[   11.830020] usb 4-1: new low speed USB device using uhci_hcd and address 2
>[   11.994801] usb 4-1: configuration #1 chosen from 1 choice
>[   12.045425] usbcore: registered new interface driver hiddev
>[   12.061093] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:10.2/usb4/4-1/4-1:1.0/input/input4
>[   12.067028] generic-usb 0003:046D:C01D.0001: input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:10.2-1/input0
>[   12.067050] usbcore: registered new interface driver usbhid
>[   12.067054] usbhid: v2.6:USB HID core driver
>[   12.231269] Mantis 0000:00:09.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>[   12.231333] irq: 16, latency: 64
>[   12.231334]  memory: 0xeff00000, mmio: 0xffffc200003c0000
>[   12.231338] found a VP-2040 PCI DVB-C device on (00:09.0),
>[   12.231341]     Mantis Rev 1 [1822:0043], irq: 16, latency: 64
>[   12.231344]     memory: 0xeff00000, mmio: 0xffffc200003c0000
>[   12.234213]     MAC Address=[00:08:ca:1c:64:40]
>[   12.234255] mantis_alloc_buffers (0): DMA=0x3d970000 cpu=0xffff88003d970000 size=65536
>[   12.234261] mantis_alloc_buffers (0): RISC=0x3e073000 cpu=0xffff88003e073000 size=1000
>[   12.234265] DVB: registering new adapter (Mantis dvb adapter)
>[   12.604133] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0011d800001d43ce]
>[   12.739112] mantis_frontend_init (0): Probing for CU1216 (DVB-C)
>[   12.742626] TDA10023: i2c-addr = 0x0c, id = 0x7d
>[   12.742630] mantis_frontend_init (0): found Philips CU1216 DVB-C frontend (TDA10023) @ 0x0c
>[   12.742633] mantis_frontend_init (0): Mantis DVB-C Philips CU1216 frontend attach success
>[   12.742638] DVB: registering adapter 0 frontend 0 (Philips TDA10023 DVB-C)...
>[   12.742705] mantis_ca_init (0): Registering EN50221 device
>[   12.760225] mantis_ca_init (0): Registered EN50221 device
>[   12.760236] mantis_hif_init (0): Adapter(0) Initializing Mantis Host Interface
>[   12.760341] input: Mantis VP-2040 IR Receiver as /devices/virtual/input/input5
>[   12.867022] Mantis VP-2040 IR Receiver: unknown key: key=0x00 raw=0x00 down=1
>[   12.869265] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>[   12.873734] nouveau 0000:01:00.0: Detected an NV20 generation card (0x028200a2)
>[   12.873836] nouveau 0000:01:00.0: Attempting to load BIOS image from PROM
>[   12.967011] Mantis VP-2040 IR Receiver: unknown key: key=0x00 raw=0x00 down=0
>[   13.058413] VIA 82xx Audio 0000:00:11.5: PCI INT C -> GSI 22 (level, low) -> IRQ 22
>[   13.058765] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64
>[   13.064439] nouveau 0000:01:00.0: ... appears to be valid
>[   13.064860] nouveau 0000:01:00.0: BMP BIOS found
>[   13.064862] nouveau 0000:01:00.0: BMP version 5.36
>[   13.064865] nouveau 0000:01:00.0: Bios version 04.28.20.23
>[   13.064869] nouveau 0000:01:00.0: Found Display Configuration Block version 2.2
>[   13.064873] nouveau 0000:01:00.0: Raw DCB entry 0: 02000310 000088b8
>[   13.064876] nouveau 0000:01:00.0: Raw DCB entry 1: 02110302 00000010
>[   13.064879] nouveau 0000:01:00.0: Raw DCB entry 2: 01010300 000088b8
>[   13.064882] nouveau 0000:01:00.0: Raw DCB entry 3: 01120321 00000002
>[   13.065366] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xC7EE
>[   13.065386] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xCB38
>[   13.068224] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xC8D6
>[   13.068262] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xD0C2
>[   13.068269] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xD0DE
>[   13.068275] nouveau 0000:01:00.0: Parsing VBIOS init table 5 at offset 0xCA19
>[   13.068285] nouveau 0000:01:00.0: Parsing VBIOS init table 6 at offset 0xCAD3
>[   13.068288] nouveau 0000:01:00.0: No pointer to output script table
>[   13.068291] nouveau 0000:01:00.0: No pointer to output script table
>[   13.068293] nouveau 0000:01:00.0: No pointer to output script table
>[   13.068296] nouveau 0000:01:00.0: No pointer to output script table
>[   13.079982] [TTM] Zone  kernel: Available graphics memory: 513344 kiB.
>[   13.080023] agpgart-amd64 0000:00:00.0: AGP 3.0 bridge
>[   13.080041] agpgart: modprobe tried to set rate=x12. Setting to AGP3 x8 mode.
>[   13.080048] agpgart-amd64 0000:00:00.0: putting AGP V3 device into 8x mode
>[   13.080126] nouveau 0000:01:00.0: putting AGP V3 device into 8x mode
>[   13.080438] nouveau 0000:01:00.0: Allocating FIFO number 0
>[   13.081256] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 0
>[   13.081265] nouveau 0000:01:00.0: Initial CRTC_OWNER is 0
>[   13.081322] nouveau 0000:01:00.0: Probing TV encoders on I2C bus: 2
>[   13.086018] nouveau 0000:01:00.0: No TV encoders found.
>[   13.086026] nouveau 0000:01:00.0: Detected a VGA connector
>[   13.086082] nouveau 0000:01:00.0: Detected a DVI-I connector
>[   13.086121] nouveau 0000:01:00.0: Saving VGA fonts
>[   13.246635] allocated 1280x1024 fb: 0x49000, bo ffff88003e0d9a00
>[   13.250075] Console: switching to colour frame buffer device 160x64
>[   13.250108] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 1)
>[   13.250113] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
>[   13.250116] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 2)
>[   13.250121] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 0
>[   13.260138] nouveau 0000:01:00.0: vpll: n 16 m 1 log2p 2
>[   13.260148] [drm] TMDS-8: set mode 1280x1024 26
>[   13.260488] nouveau 0000:01:00.0: Setting dpms mode 0 on CRTC 0
>[   13.270495] nouveau 0000:01:00.0: nv04_dfp_commit called for encoder 1
>[   13.270499] nouveau 0000:01:00.0: Setting dpms mode 0 on tmds encoder (output 1)
>[   13.270503] nouveau 0000:01:00.0: Output DVI-I-1 is running on CRTC 0 using output B
>[   13.270507] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 1
>[   13.281721] fb0: nouveaufb frame buffer device
>[   13.281723] registered panic notifier
>[   13.281729] [drm] Initialized nouveau 0.0.15 v2.6.31-rc6-644-g8640d8250f779fc5b for 0000:01:00.0 on minor 0
>[   14.225615] EXT3 FS on sda5, internal journal
>[   14.536269] nf_conntrack version 0.5.0 (8189 buckets, 32756 max)
>[   17.680854] ReiserFS: sda6: found reiserfs format "3.6" with standard journal
>[   17.680870] ReiserFS: sda6: using ordered data mode
>[   17.724092] ReiserFS: sda6: journal params: device sda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>[   17.725972] ReiserFS: sda6: checking transaction log (sda6)
>[   17.786009] ReiserFS: sda6: Using r5 hash to sort names
>[   17.856495] kjournald starting.  Commit interval 5 seconds
>[   17.856565] EXT3 FS on sda7, internal journal
>[   17.856570] EXT3-fs: mounted filesystem with ordered data mode.
>[   17.912450] kjournald starting.  Commit interval 5 seconds
>[   17.912522] EXT3 FS on sda8, internal journal
>[   17.912525] EXT3-fs: mounted filesystem with ordered data mode.
>[   17.964815] kjournald starting.  Commit interval 5 seconds
>[   17.964886] EXT3 FS on sda9, internal journal
>[   17.964890] EXT3-fs: mounted filesystem with ordered data mode.
>[   18.069470] Adding 4883752k swap on /dev/sda3.  Priority:-1 extents:1 across:4883752k
>[   36.780007] eth1: no IPv6 routers present
>[   59.984247] tun: Universal TUN/TAP device driver, 1.6
>[   59.984251] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
>[   64.167860] w83627hf: Found W83627THF chip at 0x290
>[   64.167941] w83627hf w83627hf.656: Reading VID from GPIO5
>[   69.757007] sixxs: no IPv6 routers present
>[  258.011396] nouveau 0000:01:00.0: Allocating FIFO number 1
>[  258.011962] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1
>[  300.704023] Machine check events logged
>[  619.454017] Machine check events logged
>[  956.954018] Machine check events logged
>[ 1256.954018] Machine check events logged
>[ 1660.079010] Machine check events logged
>[ 2185.079010] Machine check events logged
>[ 2635.079011] Machine check events logged
>[ 2953.829011] Machine check events logged
>[ 3647.580012] Machine check events logged
>[ 3966.330011] Machine check events logged
>[12947.388280] nouveau 0000:01:00.0: nouveau_channel_free: freeing fifo 1
>[12952.895071] SysRq : Changing Loglevel
>[12952.895673] Loglevel set to 9
>[12966.466016] nouveau 0000:01:00.0: Allocating FIFO number 1
>[12966.466589] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1
>[12979.326883] nouveau 0000:01:00.0: nouveau_channel_free: freeing fifo 1
>[12987.969769] Console: switching to colour VGA+ 80x25
>[12988.004845] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 0
>[12988.014927] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 1
>[12988.015701] nouveau 0000:01:00.0: Restoring VGA fonts
>[12988.019632] unregistered panic notifier
>[12988.023076] nouveau 0000:01:00.0: nouveau_channel_free: freeing fifo 0
>[12988.023320] [TTM] Zone  kernel: Used memory at exit: 0 kiB.
>[12988.024059] [drm] Module unloaded
>[12997.091268] [drm] Initialized drm 1.1.0 20060810
>[12997.427189] nouveau 0000:01:00.0: Detected an NV20 generation card (0x028200a2)
>[12997.427355] nouveau 0000:01:00.0: Attempting to load BIOS image from PROM
>[12997.563063] nouveau 0000:01:00.0: ... appears to be valid
>[12997.563543] nouveau 0000:01:00.0: BMP BIOS found
>[12997.563601] nouveau 0000:01:00.0: BMP version 5.36
>[12997.563661] nouveau 0000:01:00.0: Bios version 04.28.20.23
>[12997.563721] nouveau 0000:01:00.0: Found Display Configuration Block version 2.2
>[12997.563791] nouveau 0000:01:00.0: Raw DCB entry 0: 02000310 000088b8
>[12997.563852] nouveau 0000:01:00.0: Raw DCB entry 1: 02110302 00000010
>[12997.563912] nouveau 0000:01:00.0: Raw DCB entry 2: 01010300 000088b8
>[12997.563972] nouveau 0000:01:00.0: Raw DCB entry 3: 01120321 00000002
>[12997.565112] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xC7EE
>[12997.565191] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xCB38
>[12997.567279] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xC8D6
>[12997.567372] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xD0C2
>[12997.567437] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xD0DE
>[12997.567500] nouveau 0000:01:00.0: Parsing VBIOS init table 5 at offset 0xCA19
>[12997.567569] nouveau 0000:01:00.0: Parsing VBIOS init table 6 at offset 0xCAD3
>[12997.567630] nouveau 0000:01:00.0: No pointer to output script table
>[12997.567689] nouveau 0000:01:00.0: No pointer to output script table
>[12997.567749] nouveau 0000:01:00.0: No pointer to output script table
>[12997.567808] nouveau 0000:01:00.0: No pointer to output script table
>[12997.578868] [TTM] Zone  kernel: Available graphics memory: 513344 kiB.
>[12997.578950] agpgart-amd64 0000:00:00.0: AGP 3.0 bridge
>[12997.579176] agpgart: modprobe tried to set rate=x12. Setting to AGP3 x8 mode.
>[12997.579242] agpgart-amd64 0000:00:00.0: putting AGP V3 device into 8x mode
>[12997.579377] nouveau 0000:01:00.0: putting AGP V3 device into 8x mode
>[12997.579711] nouveau 0000:01:00.0: Allocating FIFO number 0
>[12997.580964] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 0
>[12997.581127] nouveau 0000:01:00.0: Initial CRTC_OWNER is 0
>[12997.581245] nouveau 0000:01:00.0: Probing TV encoders on I2C bus: 2
>[12997.586455] nouveau 0000:01:00.0: No TV encoders found.
>[12997.586522] nouveau 0000:01:00.0: Detected a VGA connector
>[12997.586633] nouveau 0000:01:00.0: Detected a DVI-I connector
>[12997.586727] nouveau 0000:01:00.0: Saving VGA fonts
>[12997.757039] allocated 1280x1024 fb: 0x49000, bo ffff88003e1e2c00
>[12997.762073] Console: switching to colour frame buffer device 160x64
>[12997.762101] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 1)
>[12997.762106] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
>[12997.762110] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 2)
>[12997.762115] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 0
>[12997.773285] nouveau 0000:01:00.0: vpll: n 16 m 1 log2p 2
>[12997.773296] [drm] TMDS-8: set mode 1280x1024 26
>[12997.773637] nouveau 0000:01:00.0: Setting dpms mode 0 on CRTC 0
>[12997.783644] nouveau 0000:01:00.0: nv04_dfp_commit called for encoder 1
>[12997.783648] nouveau 0000:01:00.0: Setting dpms mode 0 on tmds encoder (output 1)
>[12997.783652] nouveau 0000:01:00.0: Output DVI-I-1 is running on CRTC 0 using output B
>[12997.783658] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 1
>[12997.795055] fb0: nouveaufb frame buffer device
>[12997.795067] registered panic notifier
>[12997.795082] [drm] Initialized nouveau 0.0.15 v2.6.31-rc6-646-g325047a329c08a5d2 for 0000:01:00.0 on minor 0
>[13006.735918] nouveau 0000:01:00.0: Allocating FIFO number 1
>[13006.736494] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1
>[13017.606559] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 1)
>[13017.606566] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 0
>[13017.664692] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 0
>[13017.664707] nouveau 0000:01:00.0: vpll: n 16 m 1 log2p 2
>[13017.664716] [drm] TMDS-8: set mode  28
>[13017.664928] nouveau 0000:01:00.0: Setting dpms mode 0 on CRTC 0
>[13017.674935] nouveau 0000:01:00.0: nv04_dfp_commit called for encoder 1
>[13017.674939] nouveau 0000:01:00.0: Setting dpms mode 0 on tmds encoder (output 1)
>[13017.674943] nouveau 0000:01:00.0: Output DVI-I-1 is running on CRTC 0 using output B
>[13017.674948] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 1
>[13017.675520] nouveau 0000:01:00.0: Setting dpms mode 0 on CRTC 0
>[13195.023575] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 1)
>[13195.023583] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 0
>[13195.126961] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 0
>[13195.126976] nouveau 0000:01:00.0: vpll: n 16 m 1 log2p 2
>[13195.126986] [drm] TMDS-8: set mode  29
>[13195.127205] nouveau 0000:01:00.0: Setting dpms mode 0 on CRTC 0
>[13195.137213] nouveau 0000:01:00.0: nv04_dfp_commit called for encoder 1
>[13195.137217] nouveau 0000:01:00.0: Setting dpms mode 0 on tmds encoder (output 1)
>[13195.137221] nouveau 0000:01:00.0: Output DVI-I-1 is running on CRTC 0 using output B
>[13195.137226] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 1
>[13195.137966] nouveau 0000:01:00.0: Setting dpms mode 0 on CRTC 0
>[13537.232851] nouveau 0000:01:00.0: nouveau_channel_free: freeing fifo 1
>[13561.469624] SysRq : Changing Loglevel
>[13561.470277] Loglevel set to 9
>[13617.178375] SysRq : Changing Loglevel
>[13617.179027] Loglevel set to 9
>[13635.179109] SysRq : Changing Loglevel
>[13635.179770] Loglevel set to 9
>[13642.362994] nouveau 0000:01:00.0: Allocating FIFO number 1
>[13642.363598] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1
>[13653.329486] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 1)
>[13653.329493] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 0
>[13653.353628] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 0
>[13653.353633] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 1
>[13653.383534] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 0
>[13653.383548] nouveau 0000:01:00.0: vpll: n 16 m 1 log2p 2
>[13653.383557] [drm] TMDS-8: set mode  2b
>[13653.383770] nouveau 0000:01:00.0: Setting dpms mode 0 on CRTC 0
>[13653.393777] nouveau 0000:01:00.0: nv04_dfp_commit called for encoder 1
>[13653.393782] nouveau 0000:01:00.0: Setting dpms mode 0 on tmds encoder (output 1)
>[13653.393786] nouveau 0000:01:00.0: Output DVI-I-1 is running on CRTC 0 using output B
>[13653.393790] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 1
>[13653.394542] nouveau 0000:01:00.0: Setting dpms mode 0 on CRTC 0
>[13661.477655] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 1)
>[13661.477662] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 0
>[13661.488842] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 0
>[13661.488847] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 1
>[13661.564137] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 0
>[13661.564151] nouveau 0000:01:00.0: vpll: n 16 m 1 log2p 2
>[13661.564161] [drm] TMDS-8: set mode  25
>[13661.564373] nouveau 0000:01:00.0: Setting dpms mode 0 on CRTC 0
>[13661.574381] nouveau 0000:01:00.0: nv04_dfp_commit called for encoder 1
>[13661.574385] nouveau 0000:01:00.0: Setting dpms mode 0 on tmds encoder (output 1)
>[13661.574389] nouveau 0000:01:00.0: Output DVI-I-1 is running on CRTC 0 using output B
>[13661.574394] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 1
>[13661.575108] nouveau 0000:01:00.0: Setting dpms mode 0 on CRTC 0
>[13869.624837] nouveau 0000:01:00.0: nouveau_channel_free: freeing fifo 1
>[13869.625025] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 0
>[13869.635035] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 1
>[13869.650715] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 1)
>[13869.650723] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 0
>[13869.650737] nouveau 0000:01:00.0: vpll: n 16 m 1 log2p 2
>[13869.650746] [drm] TMDS-8: set mode 1280x1024 26
>[13869.650959] nouveau 0000:01:00.0: Setting dpms mode 0 on CRTC 0
>[13869.660966] nouveau 0000:01:00.0: nv04_dfp_commit called for encoder 1
>[13869.660970] nouveau 0000:01:00.0: Setting dpms mode 0 on tmds encoder (output 1)
>[13869.660973] nouveau 0000:01:00.0: Output DVI-I-1 is running on CRTC 0 using output B
>[13869.660978] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 1
>[13899.447590] nouveau 0000:01:00.0: Allocating FIFO number 1
>[13899.448185] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1
>[13899.871605] nouveau 0000:01:00.0: nouveau_channel_free: freeing fifo 1
>[14188.618610] nouveau 0000:01:00.0: Allocating FIFO number 1
>[14188.619206] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1
>[14189.012699] nouveau 0000:01:00.0: nouveau_channel_free: freeing fifo 1
>[14366.291584] nouveau 0000:01:00.0: Allocating FIFO number 1
>[14366.292183] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1
>[14366.684717] nouveau 0000:01:00.0: nouveau_channel_free: freeing fifo 1
>[14484.358091] nouveau 0000:01:00.0: Allocating FIFO number 1
>[14484.358682] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1
>[14484.752636] nouveau 0000:01:00.0: nouveau_channel_free: freeing fifo 1
>[14574.942636] nouveau 0000:01:00.0: Allocating FIFO number 1
>[14574.943278] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1
>[14575.342643] nouveau 0000:01:00.0: nouveau_channel_free: freeing fifo 1
>[14699.853630] nouveau 0000:01:00.0: Allocating FIFO number 1
>[14699.854224] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1
>[14720.715715] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 1)
>[14720.715723] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 0
>[14720.726459] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 0
>[14720.726464] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 1
>[14720.798970] nouveau 0000:01:00.0: nouveau_gem_pushbuf_validate failed and gave up.
>[14720.798976] nouveau 0000:01:00.0: validate: -22
>[14720.802364] nouveau 0000:01:00.0: nouveau_channel_free: freeing fifo 1
>[14736.069935] SysRq : Keyboard mode set to system default
>[14742.382862] nouveau 0000:01:00.0: Allocating FIFO number 1
>[14742.383498] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1
>[14742.384755] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 0
>[14742.384769] nouveau 0000:01:00.0: vpll: n 16 m 1 log2p 2
>[14742.384780] [drm] TMDS-8: set mode 1280x1024 39
>[14742.385017] nouveau 0000:01:00.0: Setting dpms mode 0 on CRTC 0
>[14742.395025] nouveau 0000:01:00.0: nv04_dfp_commit called for encoder 1
>[14742.395030] nouveau 0000:01:00.0: Setting dpms mode 0 on tmds encoder (output 1)
>[14742.395034] nouveau 0000:01:00.0: Output DVI-I-1 is running on CRTC 0 using output B
>[14742.395038] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 1
>[14742.417284] nouveau 0000:01:00.0: Setting dpms mode 0 on CRTC 0
>[14767.402371] nouveau 0000:01:00.0: nouveau_channel_free: freeing fifo 1
>[14791.116582] nouveau 0000:01:00.0: Allocating FIFO number 1
>[14791.117177] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1
>[14834.836890] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 1)
>[14834.836897] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 0
>[14834.862498] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 0
>[14834.862503] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 1
>[14834.901861] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 0
>[14834.901876] nouveau 0000:01:00.0: vpll: n 16 m 1 log2p 2
>[14834.901885] [drm] TMDS-8: set mode  3e
>[14834.902105] nouveau 0000:01:00.0: Setting dpms mode 0 on CRTC 0
>[14834.912113] nouveau 0000:01:00.0: nv04_dfp_commit called for encoder 1
>[14834.912117] nouveau 0000:01:00.0: Setting dpms mode 0 on tmds encoder (output 1)
>[14834.912121] nouveau 0000:01:00.0: Output DVI-I-1 is running on CRTC 0 using output B
>[14834.912126] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 1
>[14834.912844] nouveau 0000:01:00.0: Setting dpms mode 0 on CRTC 0
>[14932.801773] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 1)
>[14932.801780] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 0
>[14932.815971] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 0
>[14932.815976] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 1
>[14932.895722] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 0
>[14932.895736] nouveau 0000:01:00.0: vpll: n 16 m 1 log2p 2
>[14932.895746] [drm] TMDS-8: set mode  3b
>[14932.895959] nouveau 0000:01:00.0: Setting dpms mode 0 on CRTC 0
>[14932.905966] nouveau 0000:01:00.0: nv04_dfp_commit called for encoder 1
>[14932.905971] nouveau 0000:01:00.0: Setting dpms mode 0 on tmds encoder (output 1)
>[14932.905975] nouveau 0000:01:00.0: Output DVI-I-1 is running on CRTC 0 using output B
>[14932.905980] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 1
>[14932.906863] nouveau 0000:01:00.0: Setting dpms mode 0 on CRTC 0
>[16350.905952] nouveau 0000:01:00.0: nouveau_channel_free: freeing fifo 1
>[16370.840584] nouveau 0000:01:00.0: Allocating FIFO number 1
>[16370.841183] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1
>[16399.996552] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 1)
>[16399.996559] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 0
>[16400.007316] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 0
>[16400.007320] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 1
>[16400.079421] nouveau 0000:01:00.0: nouveau_gem_pushbuf_validate failed and gave up.
>[16400.079427] nouveau 0000:01:00.0: validate: -22
>[16400.082901] nouveau 0000:01:00.0: nouveau_channel_free: freeing fifo 1
>[16421.357798] SysRq : Keyboard mode set to system default
>[16426.829630] nouveau 0000:01:00.0: Allocating FIFO number 1
>[16426.830244] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1
>[16426.831420] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 0
>[16426.831435] nouveau 0000:01:00.0: vpll: n 16 m 1 log2p 2
>[16426.831445] [drm] TMDS-8: set mode 1280x1024 42
>[16426.831659] nouveau 0000:01:00.0: Setting dpms mode 0 on CRTC 0
>[16426.841666] nouveau 0000:01:00.0: nv04_dfp_commit called for encoder 1
>[16426.841671] nouveau 0000:01:00.0: Setting dpms mode 0 on tmds encoder (output 1)
>[16426.841675] nouveau 0000:01:00.0: Output DVI-I-1 is running on CRTC 0 using output B
>[16426.841680] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 1
>[16426.863484] nouveau 0000:01:00.0: Setting dpms mode 0 on CRTC 0

Actions: View

Attachments on bug 23741: 29265 | 29266

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.