Attachment 31382 Details for Bug 25223 – dmesg

dmesg

dmesg.log (text/plain), 48.13 KB, created by Martin Holec on 2009-11-22 05:24:22 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Martin Holec

Created: 2009-11-22 05:24:22 UTC

Size: 48.13 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Initializing cgroup subsys cpu
>Linux version 2.6.31.5-127.fc12.x86_64 (mockbuild@x86-4.fedora.phx.redhat.com) (gcc version 4.4.2 20091027 (Red Hat 4.4.2-7) (GCC) ) #1 SMP Sat Nov 7 21:11:14 EST 2009
>Command line: initrd=initrd0.img root=live:CDLABEL=Fedora-12-x86_64-Live rootfstype=auto ro liveimg quiet  rhgb rd_NO_LUKS rd_NO_MD noiswmd nouveau.modeset=1 BOOT_IMAGE=vmlinuz0 
>KERNEL supported cpus:
>  Intel GenuineIntel
>  AMD AuthenticAMD
>  Centaur CentaurHauls
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003fe80000 (usable)
> BIOS-e820: 000000003fe80000 - 000000003ff00000 (ACPI NVS)
> BIOS-e820: 000000003ff00000 - 0000000040000000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
> BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
> BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
>DMI present.
>last_pfn = 0x3fe80 max_arch_pfn = 0x400000000
>MTRR default type: uncachable
>MTRR fixed ranges enabled:
>  00000-9FFFF write-back
>  A0000-BFFFF uncachable
>  C0000-CFFFF write-protect
>  D0000-DFFFF uncachable
>  E0000-FFFFF write-protect
>MTRR variable ranges enabled:
>  0 base 000000000 mask FC0000000 write-back
>  1 base 03FF00000 mask FFFF00000 uncachable
>  2 disabled
>  3 disabled
>  4 disabled
>  5 disabled
>  6 disabled
>  7 disabled
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>original variable MTRRs
>reg 0, base: 0GB, range: 1GB, type WB
>reg 1, base: 1023MB, range: 1MB, type UC
>total RAM coverred: 1023M
>Found optimal setting for mtrr clean up
> gran_size: 64K 	chunk_size: 2M 	num_reg: 2  	lose cover RAM: 0G
>New variable MTRRs
>reg 0, base: 0GB, range: 1GB, type WB
>reg 1, base: 1023MB, range: 1MB, type UC
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>initial memory mapped : 0 - 20000000
>init_memory_mapping: 0000000000000000-000000003fe80000
> 0000000000 - 003fe00000 page 2M
> 003fe00000 - 003fe80000 page 4k
>kernel direct mapping tables up to 3fe80000 @ 8000-b000
>RAMDISK: 3f392000 - 3fe5e06e
>ACPI: RSDP 00000000000f6820 00014 (v00 PTLTD )
>ACPI: RSDT 000000003fe8f5d2 00044 (v01 ACRSYS ACRPRDCT 06040000  LTP 00000000)
>ACPI: FACP 000000003fe99caa 00074 (v01 INTEL  CALISTGA 06040000 LOHR 0000005A)
>ACPI: DSDT 000000003fe8ff98 09D12 (v01 INTEL  CALISTGA 06040000 MSFT 02000002)
>ACPI: FACS 000000003fe9afc0 00040
>ACPI: APIC 000000003fe99d1e 00068 (v01 INTEL  CALISTGA 06040000 LOHR 0000005A)
>ACPI: HPET 000000003fe99d86 00038 (v01 INTEL  CALISTGA 06040000 LOHR 0000005A)
>ACPI: MCFG 000000003fe99dbe 0003C (v01 INTEL  CALISTGA 06040000 LOHR 0000005A)
>ACPI: APIC 000000003fe99dfa 00068 (v01 PTLTD  	 APIC   06040000  LTP 00000000)
>ACPI: BOOT 000000003fe99e62 00028 (v01 PTLTD  $SBFTBL$ 06040000  LTP 00000001)
>ACPI: SLIC 000000003fe99e8a 00176 (v01 ACRSYS ACRPRDCT 06040000 acer 00000000)
>ACPI: SSDT 000000003fe8f616 004F6 (v01  PmRef    CpuPm 00003000 INTL 20050624)
>ACPI: BIOS bug: multiple APIC/MADT found, using 0
>ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
>ACPI: Local APIC address 0xfee00000
>No NUMA configuration found
>Faking a node at 0000000000000000-000000003fe80000
>Bootmem setup node 0 0000000000000000-000000003fe80000
>  NODE_DATA [0000000000009000 - 000000000001efff]
>  bootmap [000000000001f000 -  0000000000026fcf] pages 8
>(7 early reservations) ==> bootmem [0000000000 - 003fe80000]
>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
>  #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
>  #2 [0001000000 - 00019adb00]    TEXT DATA BSS ==> [0001000000 - 00019adb00]
>  #3 [003f392000 - 003fe5e06e]          RAMDISK ==> [003f392000 - 003fe5e06e]
>  #4 [000009f800 - 0000100000]    BIOS reserved ==> [000009f800 - 0000100000]
>  #5 [00019ae000 - 00019ae178]              BRK ==> [00019ae000 - 00019ae178]
>  #6 [0000008000 - 0000009000]          PGTABLE ==> [0000008000 - 0000009000]
>found SMP MP-table at [ffff8800000f6850] f6850
> [ffffea0000000000-ffffea0000dfffff] PMD -> [ffff880001e00000-ffff880002bfffff] on node 0
>Zone PFN ranges:
>  DMA      0x00000000 -> 0x00001000
>  DMA32    0x00001000 -> 0x00100000
>  Normal   0x00100000 -> 0x00100000
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0: 0x00000000 -> 0x0000009f
>    0: 0x00000100 -> 0x0003fe80
>On node 0 totalpages: 261663
>  DMA zone: 56 pages used for memmap
>  DMA zone: 100 pages reserved
>  DMA zone: 3843 pages, LIFO batch:0
>  DMA32 zone: 3523 pages used for memmap
>  DMA32 zone: 254141 pages, LIFO batch:31
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Using ACPI (MADT) for SMP configuration information
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>SMP: Allowing 2 CPUs, 0 hotplug CPUs
>nr_irqs_gsi: 24
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
>PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
>Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000)
>NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1
>PERCPU: Embedded 29 pages at ffff8800019b9000, static data 90080 bytes
>Built 1 zonelists in Node order, mobility grouping on.  Total pages: 257984
>Policy zone: DMA32
>Kernel command line: initrd=initrd0.img root=live:CDLABEL=Fedora-12-x86_64-Live rootfstype=auto ro liveimg quiet  rhgb rd_NO_LUKS rd_NO_MD noiswmd nouveau.modeset=1 BOOT_IMAGE=vmlinuz0 
>Unknown boot option `nouveau.modeset=1': ignoring
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>Initializing CPU#0
>Checking aperture...
>No AGP bridge found
>Calgary: detecting Calgary via BIOS EBDA area
>Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>Memory: 1010900k/1047040k available (4227k kernel code, 388k absent, 35752k reserved, 2926k data, 1324k init)
>SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
>Hierarchical RCU implementation.
>NR_IRQS:4352 nr_irqs:424
>Fast TSC calibration using PIT
>Detected 1666.684 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>allocated 10485760 bytes of page_cgroup
>please try 'cgroup_disable=memory' option if you don't want memory cgroups
>hpet clockevent registered
>HPET: 3 timers in total, 0 timers will be used for per-cpu timer
>Calibrating delay loop (skipped), value calculated using timer frequency.. 3333.36 BogoMIPS (lpj=1666684)
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
>Mount-cache hash table entries: 256
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>Initializing cgroup subsys memory
>Initializing cgroup subsys devices
>Initializing cgroup subsys freezer
>Initializing cgroup subsys net_cls
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU 0/0x0 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>mce: CPU supports 6 MCE banks
>CPU0: Thermal monitoring enabled (TM2)
>using mwait in idle threads.
>Performance Counters: Core2 events, Intel PMU driver.
>... version:                 2
>... bit width:               40
>... generic counters:        2
>... value mask:              000000ffffffffff
>... max period:              000000007fffffff
>... fixed-purpose counters:  3
>... counter mask:            0000000700000003
>ACPI: Core revision 20090521
>ftrace: converting mcount calls to 0f 1f 44 00 00
>ftrace: allocating 20852 entries in 82 pages
>Setting APIC routing to flat
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>CPU0: Intel(R) Core(TM)2 CPU         T5500  @ 1.66GHz stepping 06
>Booting processor 1 APIC 0x1 ip 0x6000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 3333.50 BogoMIPS (lpj=1666753)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU 1/0x1 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>mce: CPU supports 6 MCE banks
>CPU1: Thermal monitoring enabled (TM2)
>x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
>CPU1: Intel(R) Core(TM)2 CPU         T5500  @ 1.66GHz stepping 06
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Brought up 2 CPUs
>Total of 2 processors activated (6666.87 BogoMIPS).
>sizeof(vma)=176 bytes
>sizeof(page)=56 bytes
>sizeof(inode)=584 bytes
>sizeof(dentry)=192 bytes
>sizeof(ext3inode)=776 bytes
>sizeof(buffer_head)=104 bytes
>sizeof(skbuff)=248 bytes
>sizeof(task_struct)=6008 bytes
>CPU0 attaching sched-domain:
> domain 0: span 0-1 level MC
>  groups: 0 1
>CPU1 attaching sched-domain:
> domain 0: span 0-1 level MC
>  groups: 1 0
>Booting paravirtualized kernel on bare hardware
>regulator: core version 0.5
>Time: 12:04:39  Date: 11/22/09
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
>PCI: MCFG area at e0000000 reserved in E820
>PCI: Using MMCONFIG at e0000000 - efffffff
>PCI: Using configuration type 1 for base access
>bio: create slab <bio-0> at 0
>ACPI: EC: Look up EC in DSDT
>ACPI: BIOS _OSI(Linux) query ignored
>ACPI: EC: non-query interrupt received, switching to interrupt mode
>ACPI: EC: GPE storm detected, transactions will use polling mode
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
>ACPI: EC: driver started in poll mode
>ACPI: ACPI Dock Station Driver: 2 docks/bays found
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:01.0: PME# disabled
>pci 0000:00:1b.0: reg 10 64bit mmio: [0xd2500000-0xd2503fff]
>pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1b.0: PME# disabled
>pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.0: PME# disabled
>pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.1: PME# disabled
>pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.2: PME# disabled
>pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.3: PME# disabled
>pci 0000:00:1d.0: reg 20 io port: [0x1800-0x181f]
>pci 0000:00:1d.1: reg 20 io port: [0x1820-0x183f]
>pci 0000:00:1d.2: reg 20 io port: [0x1840-0x185f]
>pci 0000:00:1d.3: reg 20 io port: [0x1860-0x187f]
>pci 0000:00:1d.7: reg 10 32bit mmio: [0xd2504000-0xd25043ff]
>pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1d.7: PME# disabled
>pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
>pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
>pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f)
>pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 1600 (mask 007f)
>pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0068 (mask 0007)
>pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
>pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
>pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
>pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
>pci 0000:00:1f.1: reg 20 io port: [0x1880-0x188f]
>pci 0000:00:1f.3: reg 20 io port: [0x18a0-0x18bf]
>pci 0000:01:00.0: reg 10 32bit mmio: [0xd1000000-0xd1ffffff]
>pci 0000:01:00.0: reg 14 64bit mmio: [0xc0000000-0xcfffffff]
>pci 0000:01:00.0: reg 1c 64bit mmio: [0xd0000000-0xd0ffffff]
>pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
>pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
>pci 0000:00:01.0: bridge 32bit mmio: [0xd0000000-0xd1ffffff]
>pci 0000:00:01.0: bridge 64bit mmio pref: [0xc0000000-0xcfffffff]
>pci 0000:02:00.0: reg 10 32bit mmio: [0x000000-0x000fff]
>pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
>pci 0000:02:00.0: PME# disabled
>pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
>pci 0000:00:1c.0: bridge io port: [0x00-0xfff]
>pci 0000:00:1c.0: bridge 32bit mmio: [0x000000-0x0fffff]
>pci 0000:00:1c.0: bridge 64bit mmio pref: [0x000000-0x0fffff]
>pci 0000:03:00.0: reg 10 64bit mmio: [0x000000-0x00ffff]
>pci 0000:03:00.0: PME# supported from D3hot D3cold
>pci 0000:03:00.0: PME# disabled
>pci 0000:00:1c.1: bridge io port: [0x00-0xfff]
>pci 0000:00:1c.1: bridge 32bit mmio: [0x000000-0x0fffff]
>pci 0000:00:1c.1: bridge 64bit mmio pref: [0x000000-0x0fffff]
>pci 0000:00:1c.2: bridge io port: [0x00-0xfff]
>pci 0000:00:1c.2: bridge 32bit mmio: [0x000000-0x0fffff]
>pci 0000:00:1c.2: bridge 64bit mmio pref: [0x000000-0x0fffff]
>pci 0000:00:1c.3: bridge io port: [0x00-0xfff]
>pci 0000:00:1c.3: bridge 32bit mmio: [0x000000-0x0fffff]
>pci 0000:00:1c.3: bridge 64bit mmio pref: [0x000000-0x0fffff]
>pci 0000:0a:09.0: reg 10 32bit mmio: [0xd2206000-0xd2206fff]
>pci 0000:0a:09.0: supports D1 D2
>pci 0000:0a:09.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:0a:09.0: PME# disabled
>pci 0000:0a:09.2: reg 10 32bit mmio: [0xd2207000-0xd22077ff]
>pci 0000:0a:09.2: reg 14 32bit mmio: [0xd2200000-0xd2203fff]
>pci 0000:0a:09.2: supports D1 D2
>pci 0000:0a:09.2: PME# supported from D0 D1 D2 D3hot
>pci 0000:0a:09.2: PME# disabled
>pci 0000:0a:09.3: reg 10 32bit mmio: [0xd2204000-0xd2205fff]
>pci 0000:0a:09.3: supports D1 D2
>pci 0000:0a:09.3: PME# supported from D0 D1 D2 D3hot
>pci 0000:0a:09.3: PME# disabled
>pci 0000:00:1e.0: transparent bridge
>pci 0000:00:1e.0: bridge 32bit mmio: [0xd2200000-0xd22fffff]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
>ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
>ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
>vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
>vgaarb: loaded
>SCSI subsystem initialized
>libata version 3.00 loaded.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64
>PCI: pci_cache_line_size set to 64 bytes
>pci 0000:00:1c.0: BAR 13: can't allocate resource
>pci 0000:00:1c.0: BAR 14: can't allocate resource
>pci 0000:00:1c.0: BAR 15: can't allocate resource
>pci 0000:00:1c.1: BAR 13: can't allocate resource
>pci 0000:00:1c.1: BAR 14: can't allocate resource
>pci 0000:00:1c.1: BAR 15: can't allocate resource
>pci 0000:00:1c.2: BAR 13: can't allocate resource
>pci 0000:00:1c.2: BAR 14: can't allocate resource
>pci 0000:00:1c.2: BAR 15: can't allocate resource
>pci 0000:00:1c.3: BAR 13: can't allocate resource
>pci 0000:00:1c.3: BAR 14: can't allocate resource
>pci 0000:00:1c.3: BAR 15: can't allocate resource
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 comparators, 64-bit 14.318180 MHz counter
>Switched to high resolution mode on CPU 0
>Switched to high resolution mode on CPU 1
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 12 devices
>ACPI: ACPI bus type pnp unregistered
>system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
>system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
>system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
>system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
>system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
>system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved
>system 00:01: iomem range 0xfed40000-0xfed44fff has been reserved
>system 00:01: iomem range 0xfed45000-0xfed8ffff has been reserved
>system 00:03: iomem range 0xfed00000-0xfed003ff has been reserved
>system 00:05: ioport range 0x800-0x80f has been reserved
>system 00:05: ioport range 0x1000-0x107f has been reserved
>system 00:05: ioport range 0x1180-0x11bf has been reserved
>system 00:05: ioport range 0x1600-0x166f has been reserved
>system 00:05: ioport range 0xfe10-0xfe11 has been reserved
>system 00:05: ioport range 0xfe00-0xfe00 has been reserved
>pci 0000:01:00.0: BAR 6: can't allocate mem resource [0xd0000000-0xcfffffff]
>pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
>pci 0000:00:01.0:   IO window: disabled
>pci 0000:00:01.0:   MEM window: 0xd0000000-0xd1ffffff
>pci 0000:00:01.0:   PREFETCH window: 0x000000c0000000-0x000000cfffffff
>pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
>pci 0000:00:1c.0:   IO window: disabled
>pci 0000:00:1c.0:   MEM window: 0x44000000-0x440fffff
>pci 0000:00:1c.0:   PREFETCH window: disabled
>pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
>pci 0000:00:1c.1:   IO window: disabled
>pci 0000:00:1c.1:   MEM window: 0x44100000-0x441fffff
>pci 0000:00:1c.1:   PREFETCH window: disabled
>pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04
>pci 0000:00:1c.2:   IO window: disabled
>pci 0000:00:1c.2:   MEM window: disabled
>pci 0000:00:1c.2:   PREFETCH window: disabled
>pci 0000:00:1c.3: PCI bridge, secondary bus 0000:07
>pci 0000:00:1c.3:   IO window: disabled
>pci 0000:00:1c.3:   MEM window: disabled
>pci 0000:00:1c.3:   PREFETCH window: disabled
>pci 0000:0a:09.0: CardBus bridge, secondary bus 0000:0b
>pci 0000:0a:09.0:   IO window: 0x002000-0x0020ff
>pci 0000:0a:09.0:   IO window: 0x002400-0x0024ff
>pci 0000:0a:09.0:   PREFETCH window: 0x40000000-0x43ffffff
>pci 0000:0a:09.0:   MEM window: 0x48000000-0x4bffffff
>pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0a
>pci 0000:00:1e.0:   IO window: 0x2000-0x2fff
>pci 0000:00:1e.0:   MEM window: 0xd2200000-0xd22fffff
>pci 0000:00:1e.0:   PREFETCH window: 0x40000000-0x43ffffff
>  alloc irq_desc for 16 on node 0
>  alloc kstat_irqs on node 0
>pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:01.0: setting latency timer to 64
>pci 0000:00:1c.0: enabling device (0000 -> 0002)
>pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:1c.0: setting latency timer to 64
>pci 0000:00:1c.1: enabling device (0000 -> 0002)
>  alloc irq_desc for 17 on node 0
>  alloc kstat_irqs on node 0
>pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>pci 0000:00:1c.1: setting latency timer to 64
>  alloc irq_desc for 18 on node 0
>  alloc kstat_irqs on node 0
>pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>pci 0000:00:1c.2: setting latency timer to 64
>  alloc irq_desc for 19 on node 0
>  alloc kstat_irqs on node 0
>pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
>pci 0000:00:1c.3: setting latency timer to 64
>pci 0000:00:1e.0: enabling device (0004 -> 0007)
>pci 0000:00:1e.0: setting latency timer to 64
>  alloc irq_desc for 20 on node 0
>  alloc kstat_irqs on node 0
>pci 0000:0a:09.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
>pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
>pci_bus 0000:01: resource 1 mem: [0xd0000000-0xd1ffffff]
>pci_bus 0000:01: resource 2 pref mem [0xc0000000-0xcfffffff]
>pci_bus 0000:02: resource 0 mem: [0x0-0xfff]
>pci_bus 0000:02: resource 1 mem: [0x44000000-0x440fffff]
>pci_bus 0000:02: resource 2 mem: [0x0-0xfffff]
>pci_bus 0000:03: resource 0 mem: [0x0-0xfff]
>pci_bus 0000:03: resource 1 mem: [0x44100000-0x441fffff]
>pci_bus 0000:03: resource 2 mem: [0x0-0xfffff]
>pci_bus 0000:04: resource 0 mem: [0x0-0xfff]
>pci_bus 0000:04: resource 1 mem: [0x0-0xfffff]
>pci_bus 0000:04: resource 2 mem: [0x0-0xfffff]
>pci_bus 0000:07: resource 0 mem: [0x0-0xfff]
>pci_bus 0000:07: resource 1 mem: [0x0-0xfffff]
>pci_bus 0000:07: resource 2 mem: [0x0-0xfffff]
>pci_bus 0000:0a: resource 0 io:  [0x2000-0x2fff]
>pci_bus 0000:0a: resource 1 mem: [0xd2200000-0xd22fffff]
>pci_bus 0000:0a: resource 2 pref mem [0x40000000-0x43ffffff]
>pci_bus 0000:0a: resource 3 io:  [0x00-0xffff]
>pci_bus 0000:0a: resource 4 mem: [0x000000-0xffffffffffffffff]
>pci_bus 0000:0b: resource 0 io:  [0x2000-0x20ff]
>pci_bus 0000:0b: resource 1 io:  [0x2400-0x24ff]
>pci_bus 0000:0b: resource 2 pref mem [0x40000000-0x43ffffff]
>pci_bus 0000:0b: resource 3 mem: [0x48000000-0x4bffffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
>TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>Trying to unpack rootfs image as initramfs...
>Freeing initrd memory: 11056k freed
>Simple Boot Flag at 0x36 set to 0x1
>audit: initializing netlink socket (disabled)
>type=2000 audit(1258891480.174:1): initialized
>HugeTLB registered 2 MB page size, pre-allocated 0 pages
>VFS: Disk quotas dquot_6.5.2
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>msgmni has been set to 1996
>SELinux:  Registering netfilter hooks
>alg: No test for stdrng (krng)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci 0000:01:00.0: Boot video device
>  alloc irq_desc for 24 on node 0
>  alloc kstat_irqs on node 0
>pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X
>pcieport-driver 0000:00:01.0: setting latency timer to 64
>  alloc irq_desc for 25 on node 0
>  alloc kstat_irqs on node 0
>pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X
>pcieport-driver 0000:00:1c.0: setting latency timer to 64
>  alloc irq_desc for 26 on node 0
>  alloc kstat_irqs on node 0
>pcieport-driver 0000:00:1c.1: irq 26 for MSI/MSI-X
>pcieport-driver 0000:00:1c.1: setting latency timer to 64
>  alloc irq_desc for 27 on node 0
>  alloc kstat_irqs on node 0
>pcieport-driver 0000:00:1c.2: irq 27 for MSI/MSI-X
>pcieport-driver 0000:00:1c.2: setting latency timer to 64
>  alloc irq_desc for 28 on node 0
>  alloc kstat_irqs on node 0
>pcieport-driver 0000:00:1c.3: irq 28 for MSI/MSI-X
>pcieport-driver 0000:00:1c.3: setting latency timer to 64
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>pciehp: PCI Express Hot Plug Controller Driver version: 0.4
>acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
>decode_hpp: Could not get hotplug parameters. Use defaults
>acpiphp: Slot [1] registered
>decode_hpp: Could not get hotplug parameters. Use defaults
>acpiphp: Slot [1-1] registered
>ACPI: AC Adapter [ACAD] (off-line)
>input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
>ACPI: Power Button [PWRF]
>input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
>ACPI: Power Button [PWRB]
>input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
>ACPI: Sleep Button [SLPB]
>ACPI: SSDT 000000003fe8fd61 001A3 (v01  PmRef  Cpu0Ist 00003000 INTL 20050624)
>ACPI: SSDT 000000003fe8fb0c 001D0 (v01  PmRef  Cpu0Cst 00003001 INTL 20050624)
>Marking TSC unstable due to TSC halts in idle
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>processor LNXCPU:00: registered as cooling_device0
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI: SSDT 000000003fe8ff04 00094 (v01  PmRef  Cpu1Ist 00003000 INTL 20050624)
>ACPI: SSDT 000000003fe8fcdc 00085 (v01  PmRef  Cpu1Cst 00003000 INTL 20050624)
>ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
>processor LNXCPU:01: registered as cooling_device1
>ACPI: Processor [CPU1] (supports 8 throttling states)
>thermal LNXTHERM:01: registered as thermal_zone0
>ACPI: Thermal Zone [THRM] (69 C)
>ACPI: Battery Slot [BAT1] (battery absent)
>ACPI: Battery Slot [BAT2] (battery absent)
>Non-volatile memory driver v1.3
>Linux agpgart interface v0.103
>Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
>00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>brd: module loaded
>loop: module loaded
>input: Macintosh mouse button emulation as /devices/virtual/input/input3
>ata_piix 0000:00:1f.1: version 2.13
>ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>ata_piix 0000:00:1f.1: setting latency timer to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1880 irq 14
>ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1888 irq 15
>Fixed MDIO Bus: probed
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ata2: port disabled. ignoring.
>  alloc irq_desc for 23 on node 0
>  alloc kstat_irqs on node 0
>ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>ehci_hcd 0000:00:1d.7: setting latency timer to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1d.7: debug port 1
>ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
>ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd2504000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.31.5-127.fc12.x86_64 ehci_hcd
>usb usb1: SerialNumber: 0000:00:1d.7
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>uhci_hcd: USB Universal Host Controller Interface driver
>uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>uhci_hcd 0000:00:1d.0: setting latency timer to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001800
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: UHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.31.5-127.fc12.x86_64 uhci_hcd
>usb usb2: SerialNumber: 0000:00:1d.0
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>uhci_hcd 0000:00:1d.1: setting latency timer to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001820
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.31.5-127.fc12.x86_64 uhci_hcd
>usb usb3: SerialNumber: 0000:00:1d.1
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>uhci_hcd 0000:00:1d.2: setting latency timer to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.31.5-127.fc12.x86_64 uhci_hcd
>usb usb4: SerialNumber: 0000:00:1d.2
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
>uhci_hcd 0000:00:1d.3: setting latency timer to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001860
>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: UHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.31.5-127.fc12.x86_64 uhci_hcd
>usb usb5: SerialNumber: 0000:00:1d.3
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>i8042.c: Detected active multiplexing controller, rev 1.1.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX0 port at 0x60,0x64 irq 12
>serio: i8042 AUX1 port at 0x60,0x64 irq 12
>serio: i8042 AUX2 port at 0x60,0x64 irq 12
>serio: i8042 AUX3 port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>rtc_cmos 00:06: RTC can wake from S4
>rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>usbhid: v2.6:USB HID core driver
>nf_conntrack version 0.5.0 (8180 buckets, 32720 max)
>CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
>nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
>sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
>ip_tables: (C) 2000-2006 Netfilter Core Team
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 17
>PM: Resume from disk failed.
>registered taskstats version 1
>No TPM chip found, activating TPM-bypass!
>  Magic number: 1:469:77
>rtc_cmos 00:06: setting system clock to 2009-11-22 12:04:41 UTC (1258891481)
>Initalizing network drop monitor service
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
>ata1.00: ATA-7: Hitachi HTS541212H9AT00, HP4OA23C, max UDMA/100
>ata1.00: 234441648 sectors, multi 16: LBA48 
>ata1.01: ATAPI: MATSHITADVD-RAM UJ-85JS, F100, max UDMA/33
>ata1.00: limited to UDMA/33 due to 40-wire cable
>ata1.00: configured for UDMA/33
>ata1.01: configured for UDMA/33
>scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54121 HP4O PQ: 0 ANSI: 5
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
>scsi 0:0:1:0: CD-ROM            MATSHITA DVD-RAM UJ-85JS  F100 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda caddy
>Uniform CD-ROM driver Revision: 3.20
> sda:
>sr 0:0:1:0: Attached scsi CD-ROM sr0
>sr 0:0:1:0: Attached scsi generic sg1 type 5
> sda1 < sda5 sda6 sda7 sda8 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>Freeing unused kernel memory: 1324k freed
>Write protecting the kernel read-only data: 6344k
>dracut: dracut-002-13.4.git8f397a9b.fc12
>dracut: rd_NO_LUKS: removing cryptoluks activation
>dracut: root was live:/dev/disk/by-label/Fedora-12-x86_64-Live, liveroot is now live:CDLABEL=Fedora-12-x86_64-Live
>Clocksource tsc unstable (delta = -125300570 ns)
>udev: starting version 145
>[drm] Initialized drm 1.1.0 20060810
>nouveau 0000:01:00.0: power state changed by ACPI to D0
>nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>nouveau 0000:01:00.0: setting latency timer to 64
>[drm] nouveau 0000:01:00.0: failed to evaluate _DSM: 5
>[drm] nouveau 0000:01:00.0: Detected an NV40 generation card (0x046700a3)
>[drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PROM
>[drm] nouveau 0000:01:00.0: ... BIOS signature not found
>[drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
>[drm] nouveau 0000:01:00.0: ... appears to be valid
>[drm] nouveau 0000:01:00.0: BIT BIOS found
>[drm] nouveau 0000:01:00.0: Bios version 05.72.22.47
>[drm] nouveau 0000:01:00.0: TMDS table script pointers not stubbed
>[drm] nouveau 0000:01:00.0: Found Display Configuration Block version 3.0
>[drm] nouveau 0000:01:00.0: Raw DCB entry 0: 03005323 00000004
>[drm] nouveau 0000:01:00.0: Raw DCB entry 1: 01010300 00000028
>[drm] nouveau 0000:01:00.0: Raw DCB entry 2: 04026312 00000000
>[drm] nouveau 0000:01:00.0: Raw DCB entry 3: 020323f1 00a0c070
>[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xDC10
>[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xDF14
>[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xE406
>[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xE581
>[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xE6F6
>[drm] nouveau 0000:01:00.0: BIOS FP mode: 1024x768 (65000kHz pixel clock)
>[TTM] Zone  kernel: Available graphics memory: 511642 kiB.
>[drm] nouveau 0000:01:00.0: 128 MiB VRAM
>[drm] nouveau 0000:01:00.0: 64 MiB GART (aperture)
>[drm] nouveau 0000:01:00.0: Allocating FIFO number 0
>[drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 0
>[drm] nouveau 0000:01:00.0: Initial CRTC_OWNER is 0
>[drm] nouveau 0000:01:00.0: Enable TV-Out with tv module option
>[drm] nouveau 0000:01:00.0: Detected a LVDS connector
>[drm] nouveau 0000:01:00.0: LVDS present in DCB table, but couldn't determine its native mode.  Disabling.
>[drm] nouveau 0000:01:00.0: Detected a VGA connector
>[drm] nouveau 0000:01:00.0: Detected a DVI-D connector
>[drm] nouveau 0000:01:00.0: Saving VGA fonts
>------------[ cut here ]------------
>WARNING: at drivers/gpu/drm/drm_crtc_helper.c:1031 drm_helper_initial_config+0x46/0x61 [drm_kms_helper]() (Not tainted)
>Hardware name: TravelMate C210 
>No connectors reported connected with modes
>Modules linked in: nouveau(+) ttm drm_kms_helper drm i2c_algo_bit i2c_core
>Pid: 145, comm: work_for_cpu Not tainted 2.6.31.5-127.fc12.x86_64 #1
>Call Trace:
> [<ffffffff81051694>] warn_slowpath_common+0x84/0x9c
> [<ffffffff81051703>] warn_slowpath_fmt+0x41/0x43
> [<ffffffffa0042313>] drm_helper_initial_config+0x46/0x61 [drm_kms_helper]
> [<ffffffffa0059b4b>] nouveau_card_init+0xc56/0xc66 [nouveau]
> [<ffffffffa0059f1e>] nouveau_load+0x3b3/0x3c1 [nouveau]
> [<ffffffffa00183ba>] drm_get_dev+0x36e/0x46f [drm]
> [<ffffffff81063af6>] ? do_work_for_cpu+0x0/0x2a
> [<ffffffffa008fd08>] nouveau_pci_probe+0x15/0x17 [nouveau]
> [<ffffffff812101e1>] local_pci_probe+0x17/0x1b
> [<ffffffff81063b0e>] do_work_for_cpu+0x18/0x2a
> [<ffffffff81067765>] kthread+0x91/0x99
> [<ffffffff81012daa>] child_rip+0xa/0x20
> [<ffffffff810676d4>] ? kthread+0x0/0x99
> [<ffffffff81012da0>] ? child_rip+0x0/0x20
>---[ end trace 0f0e4123efb902b8 ]---
>[drm] Initialized nouveau 0.0.15 20090420 for 0000:01:00.0 on minor 0
>dracut: Starting plymouth daemon
>dracut: rd_NO_MD: removing MD RAID activation
>dracut: rd_NO_MDIMSM: no MD RAID for imsm/isw raids
>usb 5-2: new full speed USB device using uhci_hcd and address 2
>yenta_cardbus 0000:0a:09.0: CardBus bridge found [1025:0113]
>yenta_cardbus 0000:0a:09.0: Using CSCINT to route CSC interrupts to PCI
>yenta_cardbus 0000:0a:09.0: Routing CardBus interrupts to PCI
>yenta_cardbus 0000:0a:09.0: TI: mfunc 0x01321b22, devctl 0x64
>input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/device:02/input/input5
>ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
>usb 5-2: New USB device found, idVendor=0483, idProduct=2016
>usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 5-2: Product: Biometric Coprocessor
>usb 5-2: Manufacturer: STMicroelectronics
>usb 5-2: configuration #1 chosen from 1 choice
>yenta_cardbus 0000:0a:09.0: ISA IRQ mask 0x0cf8, PCI irq 20
>yenta_cardbus 0000:0a:09.0: Socket status: 30000006
>pci_bus 0000:0a: Raising subordinate bus# of parent bus (#0a) from #0b to #0e
>yenta_cardbus 0000:0a:09.0: pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff
>yenta_cardbus 0000:0a:09.0: pcmcia: parent PCI bridge Memory window: 0xd2200000 - 0xd22fffff
>yenta_cardbus 0000:0a:09.0: pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x43ffffff
>input: PS/2 Generic Mouse as /devices/platform/i8042/serio4/input/input6
>sr 0:0:1:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
>sr 0:0:1:0: [sr0] Sense Key : Illegal Request [current] 
>Info fld=0x52000
>sr 0:0:1:0: [sr0] Add. Sense: Illegal mode for this track
>end_request: I/O error, dev sr0, sector 1343488
>Buffer I/O error on device sr0, logical block 167936
>sr 0:0:1:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
>sr 0:0:1:0: [sr0] Sense Key : Illegal Request [current] 
>Info fld=0x52000
>sr 0:0:1:0: [sr0] Add. Sense: Illegal mode for this track
>end_request: I/O error, dev sr0, sector 1343488
>Buffer I/O error on device sr0, logical block 167936
>sr 0:0:1:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
>sr 0:0:1:0: [sr0] Sense Key : Illegal Request [current] 
>Info fld=0x52000
>sr 0:0:1:0: [sr0] Add. Sense: Illegal mode for this track
>end_request: I/O error, dev sr0, sector 1343488
>Buffer I/O error on device sr0, logical block 167936
>sr 0:0:1:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
>sr 0:0:1:0: [sr0] Sense Key : Illegal Request [current] 
>Info fld=0x52000
>sr 0:0:1:0: [sr0] Add. Sense: Illegal mode for this track
>end_request: I/O error, dev sr0, sector 1343488
>Buffer I/O error on device sr0, logical block 167936
>sr 0:0:1:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
>sr 0:0:1:0: [sr0] Sense Key : Illegal Request [current] 
>Info fld=0x52000
>sr 0:0:1:0: [sr0] Add. Sense: Illegal mode for this track
>end_request: I/O error, dev sr0, sector 1343488
>Buffer I/O error on device sr0, logical block 167936
>ACPI: EC: missing confirmations, switch off interrupt mode.
>sr 0:0:1:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
>sr 0:0:1:0: [sr0] Sense Key : Illegal Request [current] 
>Info fld=0x52000
>sr 0:0:1:0: [sr0] Add. Sense: Illegal mode for this track
>end_request: I/O error, dev sr0, sector 1343488
>Buffer I/O error on device sr0, logical block 167936
>sr 0:0:1:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
>sr 0:0:1:0: [sr0] Sense Key : Illegal Request [current] 
>Info fld=0x52000
>sr 0:0:1:0: [sr0] Add. Sense: Illegal mode for this track
>end_request: I/O error, dev sr0, sector 1343488
>Buffer I/O error on device sr0, logical block 167936
>sr 0:0:1:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
>sr 0:0:1:0: [sr0] Sense Key : Illegal Request [current] 
>Info fld=0x52000
>sr 0:0:1:0: [sr0] Add. Sense: Illegal mode for this track
>end_request: I/O error, dev sr0, sector 1343488
>Buffer I/O error on device sr0, logical block 167936
>sr 0:0:1:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
>sr 0:0:1:0: [sr0] Sense Key : Illegal Request [current] 
>Info fld=0x52000
>sr 0:0:1:0: [sr0] Add. Sense: Illegal mode for this track
>end_request: I/O error, dev sr0, sector 1343488
>Buffer I/O error on device sr0, logical block 167936
>ISO 9660 Extensions: Microsoft Joliet Level 3
>ISO 9660 Extensions: RRIP_1991A
>squashfs: version 4.0 (2009/01/31) Phillip Lougher
>EXT4-fs (dm-0): barriers enabled
>kjournald2 starting: pid 363, dev dm-0:8, commit interval 5 seconds
>EXT4-fs (dm-0): internal journal on dm-0:8
>EXT4-fs (dm-0): delayed allocation enabled
>EXT4-fs: file extents enabled
>EXT4-fs: mballoc enabled
>EXT4-fs (dm-0): mounted filesystem with ordered data mode
>dracut: Mounted root filesystem /dev/mapper/live-rw
>dracut: Loading SELinux policy
>type=1404 audit(1258891496.749:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
>SELinux: 8192 avtab hash slots, 144734 rules.
>SELinux: 8192 avtab hash slots, 144734 rules.
>SELinux:  8 users, 12 roles, 2941 types, 136 bools, 1 sens, 1024 cats
>SELinux:  75 classes, 144734 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev dm-0, type ext4), uses xattr
>SELinux: initialized (dev loop2, type squashfs), not configured for labeling
>SELinux: initialized (dev loop0, type squashfs), not configured for labeling
>SELinux: initialized (dev sr0, type iso9660), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>type=1403 audit(1258891498.546:3): policy loaded auid=4294967295 ses=4294967295
>dracut: Switching root
>udev: starting version 145
>ACPI: WMI: Mapper loaded
>i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>ACPI: I/O resource 0000:00:1f.3 [0x18a0-0x18bf] conflicts with ACPI region SMBI [0x18a0-0x18af]
>ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>intel_rng: FWH not detected
>tg3.c:v3.99 (April 20, 2009)
>tg3 0000:03:00.0: enabling device (0000 -> 0002)
>tg3 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>tg3 0000:03:00.0: setting latency timer to 64
>tg3 0000:03:00.0: wake-up capability disabled by ACPI
>tg3 0000:03:00.0: PME# disabled
>eth0: Tigon3 [partno(BCM95787m) rev b002] (PCI Express) MAC address 00:16:36:85:90:0c
>eth0: attached PHY is 5787 (10/100/1000Base-T Ethernet) (WireSpeed[1])
>eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
>eth0: dma_rwctrl[76180000] dma_mask[64-bit]
>NET: Registered protocol family 23
>parport_pc 00:09: activated
>parport_pc 00:09: reported by Plug and Play ACPI
>parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
>acer-wmi: Acer Laptop ACPI-WMI Extras
>iTCO_vendor_support: vendor-support=0
>tifm_7xx1 0000:0a:09.3: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>nsc-ircc, chip->init
>nsc-ircc, Found chip at base=0x04e
>nsc-ircc, driver loaded (Dag Brattli)
>nsc_ircc_open(), can't get iobase of 0x2f8
>nsc-ircc, Found chip at base=0x04e
>nsc-ircc, driver loaded (Dag Brattli)
>nsc_ircc_open(), can't get iobase of 0x2f8
>nsc-ircc 00:07: disabled
>usb 3-1: new full speed USB device using uhci_hcd and address 2
>ppdev: user-space parallel port driver
>usb 3-1: New USB device found, idVendor=0a5c, idProduct=2101
>usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 3-1: Product: Acer Module
>usb 3-1: Manufacturer: Broadcom Corp
>usb 3-1: configuration #1 chosen from 1 choice
>acerhdf: Acer Aspire One Fan driver, v.0.5.13
>acerhdf: no Aspire One hardware found
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
>iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x1060)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>cfg80211: Calling CRDA to update world regulatory domain
>firewire_ohci 0000:0a:09.2: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>firewire_ohci: Added fw-ohci device 0000:0a:09.2, OHCI version 1.10
>firewire_core: created device fw0: GUID 00c09f0000b376b7, S400
>Bluetooth: Core ver 2.15
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: Generic Bluetooth USB driver ver 0.6
>usbcore: registered new interface driver btusb
>iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26kds
>iwl3945: Copyright(c) 2003-2009 Intel Corporation
>iwl3945 0000:02:00.0: enabling device (0000 -> 0002)
>iwl3945 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>iwl3945 0000:02:00.0: setting latency timer to 64
>iwl3945 0000:02:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels
>iwl3945 0000:02:00.0: Detected Intel Wireless WiFi Link 3945ABG
>  alloc irq_desc for 29 on node 0
>  alloc kstat_irqs on node 0
>iwl3945 0000:02:00.0: irq 29 for MSI/MSI-X
>cfg80211: World regulatory domain updated:
>	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>	(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>	(2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>	(2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>	(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>	(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>phy0: Selected rate control algorithm 'iwl-3945-rs'
>  alloc irq_desc for 22 on node 0
>  alloc kstat_irqs on node 0
>HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>HDA Intel 0000:00:1b.0: setting latency timer to 64
>hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
>ALSA sound/pci/hda/hda_codec.c:3862: autoconfig: line_outs=1 (0x15/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:3866:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:3870:    hp_outs=1 (0x14/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:3871:    mono: mono_out=0x0
>ALSA sound/pci/hda/hda_codec.c:3874:    dig-out=0x1e/0x0
>ALSA sound/pci/hda/hda_codec.c:3882:    inputs: mic=0x18, fmic=0x19, line=0x1a, fline=0x0, cd=0x0, aux=0x0
>ALSA sound/pci/hda/patch_realtek.c:1181: realtek: No valid SSID, checking pincfg 0x411111f0 for NID 0x1d
>ALSA sound/pci/hda/patch_realtek.c:1255: realtek: Enable default setup for auto mode as fallback
>input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7
>device-mapper: multipath: version 1.1.0 loaded
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>Adding 4192892k swap on /dev/sda5.  Priority:-1 extents:1 across:4192892k 
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>microcode: CPU0 sig=0x6f6, pf=0x20, revision=0x48
>platform microcode: firmware: requesting intel-ucode/06-0f-06
>microcode: CPU1 sig=0x6f6, pf=0x20, revision=0x48
>platform microcode: firmware: requesting intel-ucode/06-0f-06
>Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
>microcode: CPU0 updated to revision 0xc7, date = 2007-03-15 
>microcode: CPU1 updated to revision 0xc7, date = 2007-03-15 
>Microcode Update Driver: v2.00 removed.
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>ttyS1: LSR safety check engaged!
>Bluetooth: L2CAP ver 2.13
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: BNEP (Ethernet Emulation) ver 1.3
>Bluetooth: BNEP filters: protocol multicast
>Bridge firewalling registered
>iwl3945 0000:02:00.0: firmware: requesting iwlwifi-3945-2.ucode
>Bluetooth: SCO (Voice Link) ver 0.6
>Bluetooth: SCO socket layer initialized
>iwl3945 0000:02:00.0: loaded firmware version 15.32.2.9
>Registered led device: iwl-phy0::radio
>Registered led device: iwl-phy0::assoc
>Registered led device: iwl-phy0::RX
>Registered led device: iwl-phy0::TX
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>tg3 0000:03:00.0: wake-up capability disabled by ACPI
>tg3 0000:03:00.0: PME# disabled
>  alloc irq_desc for 30 on node 0
>  alloc kstat_irqs on node 0
>tg3 0000:03:00.0: irq 30 for MSI/MSI-X
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM ver 1.11
>CE: hpet increasing min_delta_ns to 15000 nsec
>tg3: eth0: Link is up at 100 Mbps, full duplex.
>tg3: eth0: Flow control is on for TX and on for RX.
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>eth0: no IPv6 routers present
>usb 3-1: USB disconnect, address 2
>btusb_intr_complete: hci0 urb ffff88002b8ba540 failed to resubmit (19)
>btusb_bulk_complete: hci0 urb ffff88002b8baf00 failed to resubmit (19)
>btusb_bulk_complete: hci0 urb ffff88002b8ba3c0 failed to resubmit (19)
>iwl3945 0000:02:00.0: MAC is in deep sleep!.  CSR_GP_CNTRL = 0x040003DD

Actions: View

Attachments on bug 25223: 31382 | 31383 | 31425 | 31426 | 32292 | 32293

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.