Attachment 32295 Details for Bug 25795 – dmesg after booting and starting X

dmesg after booting and starting X

dmesg.out (text/plain), 39.17 KB, created by Clemens Buchacher on 2009-12-25 15:42:42 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Clemens Buchacher

Created: 2009-12-25 15:42:42 UTC

Size: 39.17 KB

patch

obsolete

>Linux version 2.6.33-rc1-00366-g2f99f5c (drizzd@darc) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) #20 SMP PREEMPT Thu Dec 24 13:14:55 CET 2009
>Command line: root=/dev/sda3 ro resume=/dev/sda7
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved)
> BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007fed0000 (usable)
> BIOS-e820: 000000007fed0000 - 000000007fee3000 (ACPI NVS)
> BIOS-e820: 000000007fee3000 - 0000000080000000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
> BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
>Notice: NX (Execute Disable) protection missing in CPU or disabled in BIOS!
>DMI present.
>Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
>e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
>No AGP bridge found
>last_pfn = 0x7fed0 max_arch_pfn = 0x400000000
>MTRR default type: uncachable
>MTRR fixed ranges enabled:
>  00000-9FFFF write-back
>  A0000-BFFFF uncachable
>  C0000-CFFFF write-protect
>  D0000-D7FFF uncachable
>  D8000-FFFFF write-protect
>MTRR variable ranges enabled:
>  0 base 000000000 mask F80000000 write-back
>  1 base 07FF00000 mask FFFF00000 uncachable
>  2 disabled
>  3 disabled
>  4 disabled
>  5 disabled
>  6 disabled
>  7 disabled
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>initial memory mapped : 0 - 20000000
>found SMP MP-table at [ffff8800000f6e40] f6e40
>init_memory_mapping: 0000000000000000-000000007fed0000
> 0000000000 - 007fe00000 page 2M
> 007fe00000 - 007fed0000 page 4k
>kernel direct mapping tables up to 7fed0000 @ 16000-1a000
>ACPI: RSDP 00000000000f6e10 00024 (v02 PTLTD )
>ACPI: XSDT 000000007fed7584 0009C (v01 SECCSD LH43STAR 06040000  LTP 00000000)
>ACPI: FACP 000000007fedfb9a 000F4 (v03 INTEL  CRESTLNE 06040000 ALAN 00000001)
>ACPI: DSDT 000000007fed94fc 0662A (v02 INTEL  CRESTLNE 06040000 INTL 20050624)
>ACPI: FACS 000000007fee2fc0 00040
>ACPI: APIC 000000007fedfc8e 00068 (v01 INTEL  CRESTLNE 06040000 LOHR 0000005A)
>ACPI: HPET 000000007fedfcf6 00038 (v01 INTEL  CRESTLNE 06040000 LOHR 0000005A)
>ACPI: MCFG 000000007fedfd2e 0003C (v01 INTEL  CRESTLNE 06040000 LOHR 0000005A)
>ACPI: TCPA 000000007fedfd6a 00032 (v01 Intel   CRESTLN 06040000      00005A52)
>ACPI: TMOR 000000007fedfd9c 00026 (v01 PTLTD           06040000 PTL  00000003)
>ACPI: APIC 000000007fedfdc2 00068 (v01 PTLTD  ? APIC   06040000  LTP 00000000)
>ACPI: HPET 000000007fedfe2a 00038 (v01 PTLTD  HPETTBL  06040000  LTP 00000001)
>ACPI: BOOT 000000007fedfe62 00028 (v01 PTLTD  $SBFTBL$ 06040000  LTP 00000001)
>ACPI: SLIC 000000007fedfe8a 00176 (v01 SECCSD LH43STAR 06040000  LTP 00000000)
>ACPI: SSDT 000000007fed8ead 0064F (v01 SataRe  SataPri 00001000 INTL 20050624)
>ACPI: SSDT 000000007fed881b 00692 (v01 SataRe  SataSec 00001000 INTL 20050624)
>ACPI: SSDT 000000007fed7bac 0025F (v01  PmRef  Cpu0Tst 00003000 INTL 20050624)
>ACPI: SSDT 000000007fed7b06 000A6 (v01  PmRef  Cpu1Tst 00003000 INTL 20050624)
>ACPI: SSDT 000000007fed7620 004E6 (v01  PmRef    CpuPm 00003000 INTL 20050624)
>ACPI: BIOS bug: multiple APIC/MADT found, using 0
>ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
>ACPI: Local APIC address 0xfee00000
>No NUMA configuration found
>Faking a node at 0000000000000000-000000007fed0000
>Bootmem setup node 0 0000000000000000-000000007fed0000
>  NODE_DATA [0000000000018000 - 000000000001cfff]
>  bootmap [000000000001d000 -  000000000002cfdf] pages 10
>(11 early reservations) ==> bootmem [0000000000 - 007fed0000]
>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
>  #1 [0001000000 - 000181f944]    TEXT DATA BSS ==> [0001000000 - 000181f944]
>  #2 [0001820000 - 000182018c]              BRK ==> [0001820000 - 000182018c]
>  #3 [00000f6e50 - 0000100000]    BIOS reserved ==> [00000f6e50 - 0000100000]
>  #4 [00000f6e40 - 00000f6e50]     MP-table mpf ==> [00000f6e40 - 00000f6e50]
>  #5 [000009f800 - 000009fd71]    BIOS reserved ==> [000009f800 - 000009fd71]
>  #6 [000009ff25 - 00000f6e40]    BIOS reserved ==> [000009ff25 - 00000f6e40]
>  #7 [000009fd71 - 000009ff25]     MP-table mpc ==> [000009fd71 - 000009ff25]
>  #8 [0000010000 - 0000012000]       TRAMPOLINE ==> [0000010000 - 0000012000]
>  #9 [0000012000 - 0000016000]      ACPI WAKEUP ==> [0000012000 - 0000016000]
>  #10 [0000016000 - 0000018000]          PGTABLE ==> [0000016000 - 0000018000]
> [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880001e00000-ffff8800039fffff] on node 0
>Zone PFN ranges:
>  DMA      0x00000010 -> 0x00001000
>  DMA32    0x00001000 -> 0x00100000
>  Normal   0x00100000 -> 0x00100000
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0: 0x00000010 -> 0x0000009f
>    0: 0x00000100 -> 0x0007fed0
>On node 0 totalpages: 523871
>  DMA zone: 56 pages used for memmap
>  DMA zone: 104 pages reserved
>  DMA zone: 3823 pages, LIFO batch:0
>  DMA32 zone: 7108 pages used for memmap
>  DMA32 zone: 512780 pages, LIFO batch:31
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Using ACPI (MADT) for SMP configuration information
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>SMP: Allowing 2 CPUs, 0 hotplug CPUs
>nr_irqs_gsi: 24
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000ce000
>PM: Registered nosave memory: 00000000000ce000 - 00000000000d0000
>PM: Registered nosave memory: 00000000000d0000 - 00000000000dc000
>PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
>Allocating PCI resources starting at 80000000 (gap: 80000000:60000000)
>setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
>PERCPU: Embedded 26 pages/cpu @ffff880001a00000 s73880 r8192 d24424 u1048576
>pcpu-alloc: s73880 r8192 d24424 u1048576 alloc=1*2097152
>pcpu-alloc: [0] 0 1 
>Built 1 zonelists in Node order, mobility grouping on.  Total pages: 516603
>Policy zone: DMA32
>Kernel command line: root=/dev/sda3 ro resume=/dev/sda7
>PID hash table entries: 4096 (order: 3, 32768 bytes)
>Checking aperture...
>No AGP bridge found
>Calgary: detecting Calgary via BIOS EBDA area
>Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>Memory: 2058108k/2095936k available (3665k kernel code, 452k absent, 37376k reserved, 3518k data, 528k init)
>Hierarchical RCU implementation.
>NR_IRQS:1280
>Extended CMOS year: 2000
>Console: colour VGA+ 80x25
>console [tty0] enabled
>hpet clockevent registered
>Fast TSC calibration using PIT
>Detected 1994.820 MHz processor.
>Calibrating delay loop (skipped), value calculated using timer frequency.. 3989.64 BogoMIPS (lpj=7979280)
>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Mount-cache hash table entries: 256
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>mce: CPU supports 6 MCE banks
>CPU0: Thermal monitoring enabled (TM2)
>using mwait in idle threads.
>Performance Events: Core2 events, Intel PMU driver.
>... version:                2
>... bit width:              40
>... generic registers:      2
>... value mask:             000000ffffffffff
>... max period:             000000007fffffff
>... fixed-purpose events:   3
>... event mask:             0000000700000003
>ACPI: Core revision 20091214
>Setting APIC routing to flat
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>CPU0: Intel(R) Core(TM)2 Duo CPU     T7300  @ 2.00GHz stepping 0a
>Booting Node   0, Processors  #1 Ok.
>Brought up 2 CPUs
>Total of 2 processors activated (7979.65 BogoMIPS).
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
>PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
>PCI: Using configuration type 1 for base access
>bio: create slab <bio-0> at 0
>ACPI: EC: Look up EC in DSDT
>ACPI: BIOS _OSI(Linux) query ignored
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>[Firmware Bug]: ACPI: ACPI brightness control misses _BQC function
>ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
>ACPI: Power Resource [FN00] (off)
>ACPI: No dock devices found.
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci_root PNP0A08:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them
>pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7] (ignored)
>pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff] (ignored)
>pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
>pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff] (ignored)
>pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
>pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
>pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xdfffffff] (ignored)
>pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfebfffff] (ignored)
>pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:01.0: PME# disabled
>pci 0000:00:1a.0: reg 20: [io  0x1800-0x181f]
>pci 0000:00:1a.1: reg 20: [io  0x1820-0x183f]
>pci 0000:00:1a.7: reg 10: [mem 0xf0504000-0xf05043ff]
>pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1a.7: PME# disabled
>pci 0000:00:1b.0: reg 10: [mem 0xf0500000-0xf0503fff 64bit]
>pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1b.0: PME# disabled
>pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.0: PME# disabled
>pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.1: PME# disabled
>pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.3: PME# disabled
>pci 0000:00:1d.0: reg 20: [io  0x1840-0x185f]
>pci 0000:00:1d.1: reg 20: [io  0x1860-0x187f]
>pci 0000:00:1d.2: reg 20: [io  0x1880-0x189f]
>pci 0000:00:1d.7: reg 10: [mem 0xf0504400-0xf05047ff]
>pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1d.7: PME# disabled
>pci 0000:00:1f.0: quirk: [io  0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
>pci 0000:00:1f.0: quirk: [io  0x1180-0x11bf] claimed by ICH6 GPIO
>pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f)
>pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 1640 (mask 000f)
>pci 0000:00:1f.2: reg 10: [io  0x0000-0x0007]
>pci 0000:00:1f.2: reg 14: [io  0x0000-0x0003]
>pci 0000:00:1f.2: reg 18: [io  0x0000-0x0007]
>pci 0000:00:1f.2: reg 1c: [io  0x0000-0x0003]
>pci 0000:00:1f.2: reg 20: [io  0x18e0-0x18ef]
>pci 0000:00:1f.2: reg 24: [io  0x18d0-0x18df]
>pci 0000:00:1f.2: PME# supported from D3hot
>pci 0000:00:1f.2: PME# disabled
>pci 0000:00:1f.3: reg 10: [mem 0x00000000-0x000000ff]
>pci 0000:00:1f.3: reg 20: [io  0x1c00-0x1c1f]
>pci 0000:01:00.0: reg 10: [mem 0xce000000-0xceffffff]
>pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
>pci 0000:01:00.0: reg 1c: [mem 0xcc000000-0xcdffffff 64bit]
>pci 0000:01:00.0: reg 24: [io  0x2000-0x207f]
>pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
>pci 0000:00:01.0: PCI bridge to [bus 01-01]
>pci 0000:00:01.0:   bridge window [io  0x2000-0x2fff]
>pci 0000:00:01.0:   bridge window [mem 0xcc000000-0xceffffff]
>pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
>pci 0000:00:1c.0: PCI bridge to [bus 02-02]
>pci 0000:03:00.0: reg 10: [mem 0xf0300000-0xf0301fff 64bit]
>pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
>pci 0000:03:00.0: PME# disabled
>pci 0000:00:1c.1: PCI bridge to [bus 03-03]
>pci 0000:00:1c.1:   bridge window [mem 0xf0300000-0xf03fffff]
>pci 0000:04:00.0: reg 10: [mem 0xf0200000-0xf0203fff 64bit]
>pci 0000:04:00.0: reg 18: [io  0x3000-0x30ff]
>pci 0000:04:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
>pci 0000:04:00.0: supports D1 D2
>pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:04:00.0: PME# disabled
>pci 0000:00:1c.3: PCI bridge to [bus 04-04]
>pci 0000:00:1c.3:   bridge window [io  0x3000-0x3fff]
>pci 0000:00:1c.3:   bridge window [mem 0xf0200000-0xf02fffff]
>pci 0000:05:09.0: reg 10: [mem 0xf0400000-0xf0400fff]
>pci 0000:05:09.0: supports D1 D2
>pci 0000:05:09.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:05:09.0: PME# disabled
>pci 0000:05:09.1: reg 10: [mem 0xf0401000-0xf04010ff]
>pci 0000:05:09.1: supports D1 D2
>pci 0000:05:09.1: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:05:09.1: PME# disabled
>pci 0000:05:09.2: reg 10: [mem 0xf0401400-0xf04014ff]
>pci 0000:05:09.2: supports D1 D2
>pci 0000:05:09.2: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:05:09.2: PME# disabled
>pci 0000:05:09.3: reg 10: [mem 0xf0401800-0xf04018ff]
>pci 0000:05:09.3: supports D1 D2
>pci 0000:05:09.3: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:05:09.3: PME# disabled
>pci 0000:05:09.4: reg 10: [mem 0xf0401c00-0xf0401cff]
>pci 0000:05:09.4: supports D1 D2
>pci 0000:05:09.4: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:05:09.4: PME# disabled
>pci 0000:00:1e.0: PCI bridge to [bus 05-06] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [mem 0xf0400000-0xf04fffff]
>pci_bus 0000:06: [bus 06-09] partially hidden behind transparent bridge 0000:05 [bus 05-06]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 11) *10
>ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
>ACPI: PCI Interrupt Link [LNKC] (IRQs *10)
>ACPI: PCI Interrupt Link [LNKD] (IRQs *5)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs *10)
>ACPI: PCI Interrupt Link [LNKG] (IRQs *5)
>ACPI: PCI Interrupt Link [LNKH] (IRQs *5)
>vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
>vgaarb: loaded
>SCSI subsystem initialized
>libata version 3.00 loaded.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: pci_cache_line_size set to 64 bytes
>NET: Registered protocol family 8
>NET: Registered protocol family 20
>HPET: 3 timers in total, 0 timers will be used for per-cpu timer
>Switching to clocksource tsc
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 10 devices
>ACPI: ACPI bus type pnp unregistered
>system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
>system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
>system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
>system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
>system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
>system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
>system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
>system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
>system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved
>system 00:06: [io  0x0680-0x069f] has been reserved
>system 00:06: [io  0x06b0-0x06ff] has been reserved
>system 00:06: [io  0x0800-0x080f] has been reserved
>system 00:06: [io  0x0900-0x090f] has been reserved
>system 00:06: [io  0x1000-0x107f] has been reserved
>system 00:06: [io  0x1180-0x11bf] has been reserved
>system 00:06: [io  0x1640-0x164f] has been reserved
>system 00:06: [io  0xfe00] has been reserved
>pci 0000:00:1e.0: BAR 9: assigned [mem 0x80000000-0x83ffffff pref]
>pci 0000:00:1c.0: BAR 8: assigned [mem 0x84000000-0x841fffff]
>pci 0000:00:1c.0: BAR 9: assigned [mem 0x84200000-0x843fffff 64bit pref]
>pci 0000:00:1c.1: BAR 9: assigned [mem 0x84400000-0x845fffff 64bit pref]
>pci 0000:00:1c.3: BAR 9: assigned [mem 0x84600000-0x847fffff pref]
>pci 0000:00:1c.0: BAR 7: assigned [io  0x4000-0x4fff]
>pci 0000:00:1c.1: BAR 7: assigned [io  0x5000-0x5fff]
>pci 0000:00:1e.0: BAR 7: assigned [io  0x6000-0x6fff]
>pci 0000:00:1f.3: BAR 0: assigned [mem 0x84800000-0x848000ff]
>pci 0000:00:1f.3: BAR 0: set to [mem 0x84800000-0x848000ff] (PCI address [0x84800000-0x848000ff]
>pci 0000:01:00.0: BAR 6: can't assign mem pref (size 0x20000)
>pci 0000:00:01.0: PCI bridge to [bus 01-01]
>pci 0000:00:01.0:   bridge window [io  0x2000-0x2fff]
>pci 0000:00:01.0:   bridge window [mem 0xcc000000-0xceffffff]
>pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
>pci 0000:00:1c.0: PCI bridge to [bus 02-02]
>pci 0000:00:1c.0:   bridge window [io  0x4000-0x4fff]
>pci 0000:00:1c.0:   bridge window [mem 0x84000000-0x841fffff]
>pci 0000:00:1c.0:   bridge window [mem 0x84200000-0x843fffff 64bit pref]
>pci 0000:00:1c.1: PCI bridge to [bus 03-03]
>pci 0000:00:1c.1:   bridge window [io  0x5000-0x5fff]
>pci 0000:00:1c.1:   bridge window [mem 0xf0300000-0xf03fffff]
>pci 0000:00:1c.1:   bridge window [mem 0x84400000-0x845fffff 64bit pref]
>pci 0000:04:00.0: BAR 6: assigned [mem 0x84600000-0x8461ffff pref]
>pci 0000:00:1c.3: PCI bridge to [bus 04-04]
>pci 0000:00:1c.3:   bridge window [io  0x3000-0x3fff]
>pci 0000:00:1c.3:   bridge window [mem 0xf0200000-0xf02fffff]
>pci 0000:00:1c.3:   bridge window [mem 0x84600000-0x847fffff pref]
>pci 0000:05:09.0: BAR 9: assigned [mem 0x80000000-0x83ffffff pref]
>pci 0000:05:09.0: BAR 10: assigned [mem 0x88000000-0x8bffffff]
>pci 0000:05:09.0: BAR 7: assigned [io  0x6000-0x60ff]
>pci 0000:05:09.0: BAR 8: assigned [io  0x6400-0x64ff]
>pci 0000:05:09.0: CardBus bridge to [bus 06-09]
>pci 0000:05:09.0:   bridge window [io  0x6000-0x60ff]
>pci 0000:05:09.0:   bridge window [io  0x6400-0x64ff]
>pci 0000:05:09.0:   bridge window [mem 0x80000000-0x83ffffff pref]
>pci 0000:05:09.0:   bridge window [mem 0x88000000-0x8bffffff]
>pci 0000:00:1e.0: PCI bridge to [bus 05-06]
>pci 0000:00:1e.0:   bridge window [io  0x6000-0x6fff]
>pci 0000:00:1e.0:   bridge window [mem 0xf0400000-0xf04fffff]
>pci 0000:00:1e.0:   bridge window [mem 0x80000000-0x83ffffff pref]
>pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:01.0: setting latency timer to 64
>pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>pci 0000:00:1c.0: setting latency timer to 64
>pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:1c.1: setting latency timer to 64
>pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
>pci 0000:00:1c.3: setting latency timer to 64
>pci 0000:00:1e.0: setting latency timer to 64
>pci 0000:05:09.0: power state changed by ACPI to D0
>pci 0000:05:09.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
>pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffffffffff]
>pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
>pci_bus 0000:01: resource 1 [mem 0xcc000000-0xceffffff]
>pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
>pci_bus 0000:02: resource 0 [io  0x4000-0x4fff]
>pci_bus 0000:02: resource 1 [mem 0x84000000-0x841fffff]
>pci_bus 0000:02: resource 2 [mem 0x84200000-0x843fffff 64bit pref]
>pci_bus 0000:03: resource 0 [io  0x5000-0x5fff]
>pci_bus 0000:03: resource 1 [mem 0xf0300000-0xf03fffff]
>pci_bus 0000:03: resource 2 [mem 0x84400000-0x845fffff 64bit pref]
>pci_bus 0000:04: resource 0 [io  0x3000-0x3fff]
>pci_bus 0000:04: resource 1 [mem 0xf0200000-0xf02fffff]
>pci_bus 0000:04: resource 2 [mem 0x84600000-0x847fffff pref]
>pci_bus 0000:05: resource 0 [io  0x6000-0x6fff]
>pci_bus 0000:05: resource 1 [mem 0xf0400000-0xf04fffff]
>pci_bus 0000:05: resource 2 [mem 0x80000000-0x83ffffff pref]
>pci_bus 0000:05: resource 3 [io  0x0000-0xffff]
>pci_bus 0000:05: resource 4 [mem 0x00000000-0xffffffffffffffff]
>pci_bus 0000:06: resource 0 [io  0x6000-0x60ff]
>pci_bus 0000:06: resource 1 [io  0x6400-0x64ff]
>pci_bus 0000:06: resource 2 [mem 0x80000000-0x83ffffff pref]
>pci_bus 0000:06: resource 3 [mem 0x88000000-0x8bffffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
>TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 262144 bind 65536)
>TCP reno registered
>UDP hash table entries: 1024 (order: 3, 32768 bytes)
>UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
>NET: Registered protocol family 1
>pci 0000:01:00.0: Boot video device
>PCI: CLS 64 bytes, default 64
>Simple Boot Flag at 0x36 set to 0x1
>audit: initializing netlink socket (disabled)
>type=2000 audit(1261787870.315:1): initialized
>VFS: Disk quotas dquot_6.5.2
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>NTFS driver 2.1.29 [Flags: R/W].
>msgmni has been set to 4019
>alg: No test for stdrng (krng)
>io scheduler noop registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pcieport 0000:00:01.0: setting latency timer to 64
>pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
>pcieport 0000:00:1c.0: setting latency timer to 64
>pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
>pcieport 0000:00:1c.1: setting latency timer to 64
>pcieport 0000:00:1c.1: irq 26 for MSI/MSI-X
>pcieport 0000:00:1c.3: setting latency timer to 64
>pcieport 0000:00:1c.3: irq 27 for MSI/MSI-X
>Linux agpgart interface v0.103
>brd: module loaded
>loop: module loaded
>Uniform Multi-Platform E-IDE driver
>ide-gd driver 1.18
>ata_piix 0000:00:1f.2: version 2.13
>ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
>ata_piix 0000:00:1f.2: setting latency timer to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x18e0 irq 14
>ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18e8 irq 15
>sky2 driver version 1.26
>sky2 0000:04:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
>sky2 0000:04:00.0: setting latency timer to 64
>sky2 0000:04:00.0: Yukon-2 EC Ultra chip revision 3
>sky2 0000:04:00.0: irq 28 for MSI/MSI-X
>sky2 eth0: addr 00:24:54:02:85:e8
>PPP generic driver version 2.4.2
>NET: Registered protocol family 24
>usbmon: debugfs is not available
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>ehci_hcd 0000:00:1a.7: setting latency timer to 64
>ehci_hcd 0000:00:1a.7: EHCI Host Controller
>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1a.7: debug port 1
>ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
>ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf0504000
>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 4 ports detected
>ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>ehci_hcd 0000:00:1d.7: setting latency timer to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:1d.7: debug port 1
>ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
>ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf0504400
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 6 ports detected
>uhci_hcd: USB Universal Host Controller Interface driver
>uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>uhci_hcd 0000:00:1a.0: setting latency timer to 64
>uhci_hcd 0000:00:1a.0: UHCI Host Controller
>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
>uhci_hcd 0000:00:1a.1: setting latency timer to 64
>uhci_hcd 0000:00:1a.1: UHCI Host Controller
>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>uhci_hcd 0000:00:1d.0: setting latency timer to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001840
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>uhci_hcd 0000:00:1d.1: setting latency timer to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
>uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001860
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>uhci_hcd 0000:00:1d.2: setting latency timer to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001880
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 2 ports detected
>Initializing USB Mass Storage driver...
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>i8042.c: Detected active multiplexing controller, rev 1.1.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX0 port at 0x60,0x64 irq 12
>serio: i8042 AUX1 port at 0x60,0x64 irq 12
>serio: i8042 AUX2 port at 0x60,0x64 irq 12
>serio: i8042 AUX3 port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>Linux video capture interface: v2.00
>gspca: main v2.8.0 registered
>usbcore: registered new interface driver zc3xx
>zc3xx: registered
>usbcore: registered new interface driver uvcvideo
>USB Video Class driver (v0.1.0)
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>usbhid: USB HID core driver
>Advanced Linux Sound Architecture Driver Version 1.0.21.
>HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>HDA Intel 0000:00:1b.0: irq 29 for MSI/MSI-X
>HDA Intel 0000:00:1b.0: setting latency timer to 64
>ata2.00: ATAPI: MATSHITADVD-RAM UJ-850S, 1.02, max UDMA/33
>hda_codec: ALC262: BIOS auto-probing.
>ata1.00: ATA-7: TOSHIBA MK2035GSS, DK022A, max UDMA/100
>ata1.00: 390721968 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ALSA device list:
>  #0: HDA Intel at 0xf0500000 irq 29
>TCP bic registered
>NET: Registered protocol family 17
>PM: Checking image partition /dev/sda7
>ata2.00: configured for UDMA/33
>ata1.00: configured for UDMA/100
>scsi 0:0:0:0: Direct-Access     ATA      TOSHIBA MK2035GS DK02 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 390721968 512-byte logical blocks: (200 GB/186 GiB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda:
>scsi 1:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ-850S  1.02 PQ: 0 ANSI: 5
>sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
> sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>usb 1-2: new high speed USB device using ehci_hcd and address 2
>Switched to NOHz mode on CPU #0
>Switched to NOHz mode on CPU #1
>uvcvideo: Found UVC 1.00 device Vega USB 2.0 Camera. (0ac8:c302)
>input: Vega USB 2.0 Camera. as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input0
>Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04713/0x200000
>input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input1
>PM: Resume from partition 8:7
>PM: Checking hibernation image.
>PM: Error -22 checking image file
>PM: Resume from disk failed.
>drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
>usb 7-2: new full speed USB device using uhci_hcd and address 2
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs (sda3): mounted filesystem with writeback data mode
>VFS: Mounted root (ext3 filesystem) readonly on device 8:3.
>Freeing unused kernel memory: 528k freed
>Write protecting the kernel read-only data: 6144k
>Freeing unused kernel memory: 412k freed
>Freeing unused kernel memory: 628k freed
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sr 1:0:0:0: Attached scsi generic sg1 type 5
>input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
>ACPI: Lid Switch [LID0]
>input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
>ACPI: Power Button [PWRB]
>input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5
>ACPI: Sleep Button [SLPB]
>input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
>ACPI: Power Button [PWRF]
>cfg80211: Using static regulatory domain info
>cfg80211: Regulatory domain: 00
>    (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>    (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
>    (2457000 KHz - 2482000 KHz @ 20000 KHz), (600 mBi, 2000 mBm)
>    (2474000 KHz - 2494000 KHz @ 20000 KHz), (600 mBi, 2000 mBm)
>    (5170000 KHz - 5250000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
>    (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
>cfg80211: Calling CRDA to update world regulatory domain
>thermal LNXTHERM:01: registered as thermal_zone0
>ACPI: Thermal Zone [TZ00] (69 C)
>thermal LNXTHERM:02: registered as thermal_zone1
>ACPI: Thermal Zone [TZ01] (69 C)
>ACPI: Battery Slot [BAT1] (battery present)
>ACPI: AC Adapter [ADP1] (on-line)
>ACPI: SSDT 000000007fed842b 00328 (v01  PmRef  Cpu0Ist 00003000 INTL 20050624)
>ACPI: SSDT 000000007fed7e0b 0059B (v01  PmRef  Cpu0Cst 00003001 INTL 20050624)
>Monitor-Mwait will be used to enter C-1 state
>Monitor-Mwait will be used to enter C-2 state
>Marking TSC unstable due to TSC halts in idle
>Switching to clocksource hpet
>ACPI: SSDT 000000007fed8753 000C8 (v01  PmRef  Cpu1Ist 00003000 INTL 20050624)
>ACPI: SSDT 000000007fed83a6 00085 (v01  PmRef  Cpu1Cst 00003000 INTL 20050624)
>yenta_cardbus 0000:05:09.0: CardBus bridge found [144d:c031]
>Bluetooth: Core ver 2.15
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>yenta_cardbus 0000:05:09.0: ISA IRQ mask 0x0cb8, PCI irq 16
>yenta_cardbus 0000:05:09.0: Socket status: 30000006
>pci_bus 0000:05: Raising subordinate bus# of parent bus (#05) from #06 to #09
>yenta_cardbus 0000:05:09.0: pcmcia: parent PCI bridge I/O window: 0x6000 - 0x6fff
>yenta_cardbus 0000:05:09.0: pcmcia: parent PCI bridge Memory window: 0xf0400000 - 0xf04fffff
>yenta_cardbus 0000:05:09.0: pcmcia: parent PCI bridge Memory window: 0x80000000 - 0x83ffffff
>Bluetooth: Generic Bluetooth USB driver ver 0.6
>usbcore: registered new interface driver btusb
>ACPI: Fan [FAN0] (off)
>iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 2.6.33-rc1-00366-g2f99f5c-kds
>iwlagn: Copyright(c) 2003-2009 Intel Corporation
>iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>iwlagn 0000:03:00.0: setting latency timer to 64
>iwlagn 0000:03:00.0: Detected Intel Wireless WiFi Link 4965AGN REV=0x4
>iwlagn 0000:03:00.0: Tunable channels: 13 802.11bg, 19 802.11a channels
>iwlagn 0000:03:00.0: irq 30 for MSI/MSI-X
>phy0: Selected rate control algorithm 'iwl-agn-rs'
>Adding 2650684k swap on /dev/sda7.  Priority:-1 extents:1 across:2650684k 
>EXT3-fs (sda3): using internal journal
>fuse init (API version 7.13)
>Bluetooth: L2CAP ver 2.14
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: BNEP (Ethernet Emulation) ver 1.3
>Bluetooth: BNEP filters: protocol multicast
>Bluetooth: HIDP (Human Interface Emulation) ver 1.2
>Bluetooth: SCO (Voice Link) ver 0.6
>Bluetooth: SCO socket layer initialized
>Slow work thread pool: Starting up
>Slow work thread pool: Ready
>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>usbcore: registered new interface driver usbserial
>USB Serial support registered for generic
>usbcore: registered new interface driver usbserial_generic
>usbserial: USB Serial Driver core
>Bluetooth: Broadcom Blutonium firmware driver ver 1.2
>usbcore: registered new interface driver bcm203x
>microcode: CPU0 sig=0x6fa, pf=0x80, revision=0x92
>platform microcode: firmware: requesting intel-ucode/06-0f-0a
>microcode: CPU1 sig=0x6fa, pf=0x80, revision=0x92
>platform microcode: firmware: requesting intel-ucode/06-0f-0a
>microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs (sda9): using internal journal
>EXT3-fs (sda9): mounted filesystem with writeback data mode
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs (sda8): using internal journal
>EXT3-fs (sda8): mounted filesystem with writeback data mode
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs (sda5): using internal journal
>EXT3-fs (sda5): mounted filesystem with writeback data mode
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs (sda6): using internal journal
>EXT3-fs (sda6): mounted filesystem with writeback data mode
>iwlagn 0000:03:00.0: firmware: requesting iwlwifi-4965-2.ucode
>iwlagn 0000:03:00.0: loaded firmware version 228.61.2.24
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>wlan0: direct probe to AP 00:26:f2:00:73:f8 (try 1)
>wlan0: direct probe responded
>wlan0: authenticate with AP 00:26:f2:00:73:f8 (try 1)
>wlan0: authenticated
>wlan0: associate with AP 00:26:f2:00:73:f8 (try 1)
>wlan0: RX AssocResp from 00:26:f2:00:73:f8 (capab=0x431 status=0 aid=2)
>wlan0: associated
>ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>wlan0: no IPv6 routers present
>sky2 eth0: enabling interface
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM ver 1.11
>iwlagn 0000:03:00.0: Microcode SW error detected.  Restarting 0x82000000.
>iwlagn 0000:03:00.0: Start IWL Error Log Dump:
>iwlagn 0000:03:00.0: Status: 0x000213E4, count: 5
>iwlagn 0000:03:00.0: Desc                               Time       data1      data2      line
>iwlagn 0000:03:00.0: FH_ERROR                     (#12) 2238238728 0x00000008 0x03130000 208
>iwlagn 0000:03:00.0: blink1  blink2  ilink1  ilink2
>iwlagn 0000:03:00.0: 0x05CB2 0x004C2 0x006DE 0x018B8
>iwlagn 0000:03:00.0: Start IWL Event Log Dump: display last 20 entries
>iwlagn 0000:03:00.0: EVT_LOGT:2238233511:0x00002000:0350
>iwlagn 0000:03:00.0: EVT_LOGT:2238238218:0x00000107:0106
>iwlagn 0000:03:00.0: EVT_LOGT:2238238219:0x00000000:0302
>iwlagn 0000:03:00.0: EVT_LOGT:2238238255:0x000000d4:0321
>iwlagn 0000:03:00.0: EVT_LOGT:2238238257:0x00000000:1350
>iwlagn 0000:03:00.0: EVT_LOGT:2238238257:0x00000000:1351
>iwlagn 0000:03:00.0: EVT_LOGT:2238238258:0x00000000:1352
>iwlagn 0000:03:00.0: EVT_LOGT:2238238258:0x00000003:1353
>iwlagn 0000:03:00.0: EVT_LOGT:2238238266:0x0000001f:0357
>iwlagn 0000:03:00.0: EVT_LOGT:2238238438:0x00000107:0106
>iwlagn 0000:03:00.0: EVT_LOGT:2238238439:0x00000000:0302
>iwlagn 0000:03:00.0: EVT_LOGT:2238238466:0x00000000:0304
>iwlagn 0000:03:00.0: EVT_LOGT:2238238664:0x00000107:0106
>iwlagn 0000:03:00.0: EVT_LOGT:2238238665:0x00000000:0302
>iwlagn 0000:03:00.0: EVT_LOGT:2238238710:0x000000d4:0321
>iwlagn 0000:03:00.0: EVT_LOGT:2238238711:0x00000000:1350
>iwlagn 0000:03:00.0: EVT_LOGT:2238238711:0x00000000:1351
>iwlagn 0000:03:00.0: EVT_LOGT:2238238712:0x00000000:1352
>iwlagn 0000:03:00.0: EVT_LOGT:2238238712:0x00000003:1353
>iwlagn 0000:03:00.0: EVT_LOGT:2238238731:0x00000000:0125
>CPUFREQ: Per core ondemand sysfs interface is deprecated - ignore_nice_load
>[drm] Initialized drm 1.1.0 20060810
>nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>nouveau 0000:01:00.0: setting latency timer to 64
>[drm] nouveau 0000:01:00.0: failed to evaluate _DSM: 5
>[drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x086500a2)
>[drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
>[drm] nouveau 0000:01:00.0: ... appears to be valid
>[drm] nouveau 0000:01:00.0: BIT BIOS found
>[drm] nouveau 0000:01:00.0: Bios version 60.86.42.00
>[drm] nouveau 0000:01:00.0: TMDS table revision 2.0 not currently supported
>[drm] nouveau 0000:01:00.0: BIT table 'd' not found
>[drm] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0
>[drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 14 2
>[drm] nouveau 0000:01:00.0:   0: 0x00000000: type 0x00 idx 0 tag 0xff
>[drm] nouveau 0000:01:00.0:   1: 0x00000140: type 0x40 idx 1 tag 0xff
>[drm] nouveau 0000:01:00.0:   2: 0x00001261: type 0x61 idx 2 tag 0x07
>[drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01001323 00010034
>[drm] nouveau 0000:01:00.0: Raw DCB entry 1: 02010300 00000028
>[drm] nouveau 0000:01:00.0: Raw DCB entry 2: 02022312 00020010
>[drm] nouveau 0000:01:00.0: Raw DCB entry 3: 0000000e 00000000
>[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xC505
>[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xC845
>[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xD29A
>[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xD38C
>[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xD586
>[drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xD5EB
>[drm] nouveau 0000:01:00.0: 0xD5EB: Condition still not met after 20ms, skipping following opcodes
>[drm] nouveau 0000:01:00.0: 0xB612: parsing output script 0
>[drm] nouveau 0000:01:00.0: 0xB788: parsing output script 0
>[TTM] Zone  kernel: Available graphics memory: 1029838 kiB.
>[drm] nouveau 0000:01:00.0: 256 MiB VRAM
>[drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
>nouveau 0000:01:00.0: firmware: requesting nouveau/nv86.ctxprog
>nouveau 0000:01:00.0: firmware: requesting nouveau/nv86.ctxvals
>[drm] nouveau 0000:01:00.0: Allocating FIFO number 1
>[drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1
>[drm] nouveau 0000:01:00.0: Detected a LVDS output
>[drm] nouveau 0000:01:00.0: Detected a DAC output
>[drm] nouveau 0000:01:00.0: Detected a TMDS output
>[drm] nouveau 0000:01:00.0: Detected a LVDS connector
>[drm] nouveau 0000:01:00.0: Detected a VGA connector
>[drm] nouveau 0000:01:00.0: Detected a DVI-D connector
>[drm] nouveau 0000:01:00.0: allocated 1280x800 fb: 0x40210000, bo ffff88007ce3e600
>Console: switching to colour frame buffer device 160x50
>fb0: nouveaufb frame buffer device
>registered panic notifier
>[drm] Initialized nouveau 0.0.15 20090420 for 0000:01:00.0 on minor 0
>[drm] nouveau 0000:01:00.0: Allocating FIFO number 2
>[drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 2
>[drm] LVDS-7: set mode 1280x800 1a
>[drm] nouveau 0000:01:00.0: 0xB616: parsing output script 1
>[drm] nouveau 0000:01:00.0: 0xB453: parsing clock script 0
>[drm] nouveau 0000:01:00.0: 0xB5D5: parsing clock script 1
>[drm] nouveau 0000:01:00.0: PFIFO_INTR 0x00000010 - Ch 2
>[drm] nouveau 0000:01:00.0: PFIFO_INTR 0x00000010 - Ch 2
>[drm] nouveau 0000:01:00.0: PFIFO_INTR 0x00000010 - Ch 2
>[drm] nouveau 0000:01:00.0: PFIFO_INTR 0x00000010 - Ch 2
>[drm] nouveau 0000:01:00.0: PFIFO_INTR 0x00000010 - Ch 2
>[drm] nouveau 0000:01:00.0: PFIFO_INTR 0x00000010 - Ch 2
>[drm] nouveau 0000:01:00.0: PFIFO_INTR 0x00000010 - Ch 2
>[drm] nouveau 0000:01:00.0: PFIFO_INTR 0x00000010 - Ch 2
>[drm] nouveau 0000:01:00.0: PFIFO_INTR 0x00000010 - Ch 2
>[drm] nouveau 0000:01:00.0: PFIFO_INTR 0x00000010 - Ch 2
>[drm] nouveau 0000:01:00.0: PFIFO_INTR 0x00000010 - Ch 2
>[drm] nouveau 0000:01:00.0: PFIFO_INTR 0x00000010 - Ch 2
>[drm] nouveau 0000:01:00.0: PFIFO_INTR 0x00000010 - Ch 2
>CE: hpet increasing min_delta_ns to 15000 nsec
>CPUFREQ: Per core ondemand sysfs interface is deprecated - up_threshold

Actions: View

Attachments on bug 25795: 32294 | 32295

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.