Attachment 33341 Details for Bug 26596 – Kernel dmesg output (each console switch triggers an invalid framebuffer id message)

Kernel dmesg output (each console switch triggers an invalid framebuffer id message)

dmesg (text/plain), 30.15 KB, created by Paul de Vrieze on 2010-02-16 12:47:54 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Paul de Vrieze

Created: 2010-02-16 12:47:54 UTC

Size: 30.15 KB

patch

obsolete

>fec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>SMP: Allowing 2 CPUs, 0 hotplug CPUs
>nr_irqs_gsi: 24
>Allocating PCI resources starting at 40000000 (gap: 40000000:bee00000)
>setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
>PERCPU: Embedded 13 pages/cpu @c2400000 s32280 r0 d20968 u2097152
>pcpu-alloc: s32280 r0 d20968 u2097152 alloc=1*4194304
>pcpu-alloc: [0] 0 1 
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 259895
>Kernel command line: root=/dev/sda5 radeon.modeset=1 splash=verbose,theme:emergence
>PID hash table entries: 4096 (order: 2, 16384 bytes)
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>Initializing HighMem for node 0 (000377fe:0003ffa8)
>Memory: 1028676k/1048224k available (6365k kernel code, 18652k reserved, 2210k data, 408k init, 138920k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xfff91000 - 0xfffff000   ( 440 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
>    lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
>      .init : 0xc1861000 - 0xc18c7000   ( 408 kB)
>      .data : 0xc1637631 - 0xc1860098   (2210 kB)
>      .text : 0xc1000000 - 0xc1637631   (6365 kB)
>Checking if this processor honours the WP bit even in supervisor mode...Ok.
>Hierarchical RCU implementation.
>NR_IRQS:320
>Console: colour VGA+ 80x25
>console [tty0] enabled
>hpet clockevent registered
>Fast TSC calibration failed
>TSC: PIT calibration matches HPET. 1 loops
>Detected 1662.529 MHz processor.
>Calibrating delay loop (skipped), value calculated using timer frequency.. 3325.05 BogoMIPS (lpj=6650116)
>Security Framework initialized
>Mount-cache hash table entries: 512
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>mce: CPU supports 6 MCE banks
>CPU0: Thermal monitoring handled by SMI
>using mwait in idle threads.
>Performance Events: Core2 events, Intel PMU driver.
>... version:                2
>... bit width:              40
>... generic registers:      2
>... value mask:             000000ffffffffff
>... max period:             000000007fffffff
>... fixed-purpose events:   3
>... event mask:             0000000700000003
>Checking 'hlt' instruction... OK.
>ACPI: Core revision 20091214
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>CPU0: Intel(R) Core(TM)2 CPU         T5500  @ 1.66GHz stepping 06
>Booting Node   0, Processors  #1 Ok.
>Initializing CPU#1
>CPU1: Thermal monitoring handled by SMI
>Brought up 2 CPUs
>Total of 2 processors activated (6650.10 BogoMIPS).
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
>PCI: not using MMCONFIG
>PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=6
>PCI: Using configuration type 1 for base access
>bio: create slab <bio-0> at 0
>ACPI: EC: Look up EC in DSDT
>ACPI: Executed 1 blocks of module-level executable AML code
>ACPI: Interpreter enabled
>ACPI: (supports S0 S5)
>ACPI: Using IOAPIC for interrupt routing
>PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
>PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
>PCI: MMCONFIG for 0000 [bus00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000) (size reduced!)
>PCI: Using MMCONFIG for extended config space
>ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
>ACPI: No dock devices found.
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci_root PNP0A08:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them
>pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7] (ignored)
>pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff] (ignored)
>pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
>pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored)
>pci_root PNP0A08:00: host bridge window [mem 0x40000000-0xffffffff] (ignored)
>pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:01.0: PME# disabled
>pci 0000:00:1b.0: reg 10: [mem 0xfebfc000-0xfebfffff 64bit]
>pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1b.0: PME# disabled
>pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.0: PME# disabled
>pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.1: PME# disabled
>pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.2: PME# disabled
>pci 0000:00:1d.0: reg 20: [io  0xec00-0xec1f]
>pci 0000:00:1d.1: reg 20: [io  0xe880-0xe89f]
>pci 0000:00:1d.2: reg 20: [io  0xe800-0xe81f]
>pci 0000:00:1d.3: reg 20: [io  0xe480-0xe49f]
>pci 0000:00:1d.7: reg 10: [mem 0xfebfbc00-0xfebfbfff]
>pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1d.7: PME# disabled
>pci 0000:00:1f.0: quirk: [io  0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO
>pci 0000:00:1f.0: quirk: [io  0x0480-0x04bf] claimed by ICH6 GPIO
>pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0250 (mask 000f)
>pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 4700 (mask 001f)
>pci 0000:00:1f.2: reg 10: [io  0x0000-0x0007]
>pci 0000:00:1f.2: reg 14: [io  0x0000-0x0003]
>pci 0000:00:1f.2: reg 18: [io  0x0000-0x0007]
>pci 0000:00:1f.2: reg 1c: [io  0x0000-0x0003]
>pci 0000:00:1f.2: reg 20: [io  0xffa0-0xffaf]
>pci 0000:00:1f.2: PME# supported from D3hot
>pci 0000:00:1f.2: PME# disabled
>pci 0000:00:1f.3: reg 20: [io  0x0400-0x041f]
>pci 0000:01:00.0: reg 10: [mem 0xc0000000-0xcfffffff pref]
>pci 0000:01:00.0: reg 14: [io  0xb000-0xb0ff]
>pci 0000:01:00.0: reg 18: [mem 0xfdff0000-0xfdffffff]
>pci 0000:01:00.0: reg 30: [mem 0xfdfc0000-0xfdfdffff pref]
>pci 0000:01:00.0: supports D1 D2
>pci 0000:00:01.0: PCI bridge to [bus 01-01]
>pci 0000:00:01.0:   bridge window [io  0x9000-0xbfff]
>pci 0000:00:01.0:   bridge window [mem 0xfdf00000-0xfdffffff]
>pci 0000:00:01.0:   bridge window [mem 0xbdf00000-0xddefffff 64bit pref]
>pci 0000:02:00.0: reg 10: [io  0xc800-0xc8ff]
>pci 0000:02:00.0: reg 18: [mem 0xfe0ff000-0xfe0fffff 64bit]
>pci 0000:02:00.0: reg 30: [mem 0xfe0e0000-0xfe0effff pref]
>pci 0000:02:00.0: supports D1 D2
>pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold
>pci 0000:02:00.0: PME# disabled
>pci 0000:00:1c.0: PCI bridge to [bus 02-02]
>pci 0000:00:1c.0:   bridge window [io  0xc000-0xcfff]
>pci 0000:00:1c.0:   bridge window [mem 0xfe000000-0xfe0fffff]
>pci 0000:03:00.0: reg 10: [mem 0xfe1ff000-0xfe1fffff]
>pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
>pci 0000:03:00.0: PME# disabled
>pci 0000:00:1c.1: PCI bridge to [bus 03-03]
>pci 0000:00:1c.1:   bridge window [mem 0xfe100000-0xfe1fffff]
>pci 0000:00:1c.2: PCI bridge to [bus 04-05]
>pci 0000:00:1c.2:   bridge window [io  0xd000-0xdfff]
>pci 0000:00:1c.2:   bridge window [mem 0xfe200000-0xfe9fffff]
>pci 0000:00:1c.2:   bridge window [mem 0xddf00000-0xdfefffff 64bit pref]
>pci 0000:06:01.0: reg 10: [mem 0xfeaff800-0xfeafffff]
>pci 0000:06:01.0: PME# supported from D0 D3hot D3cold
>pci 0000:06:01.0: PME# disabled
>pci 0000:06:01.1: reg 10: [mem 0xfeaff400-0xfeaff4ff]
>pci 0000:06:01.1: supports D1 D2
>pci 0000:06:01.1: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:06:01.1: PME# disabled
>pci 0000:06:01.2: reg 10: [mem 0xfeaff000-0xfeaff0ff]
>pci 0000:06:01.2: supports D1 D2
>pci 0000:06:01.2: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:06:01.2: PME# disabled
>pci 0000:06:01.3: reg 10: [mem 0xfeafec00-0xfeafecff]
>pci 0000:06:01.3: supports D1 D2
>pci 0000:06:01.3: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:06:01.3: PME# disabled
>pci 0000:00:1e.0: PCI bridge to [bus 06-06] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [mem 0xfea00000-0xfeafffff]
>pci_bus 0000:00: on NUMA node 0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *11 12)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 12)
>ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 12)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *4 5 6 7 12)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 12) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 12) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 12) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 12)
>vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
>vgaarb: loaded
>SCSI subsystem initialized
>libata version 3.00 loaded.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>ACPI: WMI: Mapper loaded
>Advanced Linux Sound Architecture Driver Version 1.0.21.
>PCI: Using ACPI for IRQ routing
>PCI: pci_cache_line_size set to 64 bytes
>Bluetooth: Core ver 2.15
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>HPET: 3 timers in total, 0 timers will be used for per-cpu timer
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 comparators, 64-bit 14.318180 MHz counter
>Switching to clocksource tsc
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 14 devices
>ACPI: ACPI bus type pnp unregistered
>system 00:01: [mem 0xfed13000-0xfed19fff] has been reserved
>system 00:08: [io  0x04d0-0x04d1] has been reserved
>system 00:08: [io  0x0800-0x087f] has been reserved
>system 00:08: [io  0x0480-0x04bf] has been reserved
>system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
>system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
>system 00:08: [mem 0xfed45000-0xfed89fff] has been reserved
>system 00:08: [mem 0xfed45000-0xfed89fff] has been reserved
>system 00:08: [mem 0xffb00000-0xffbfffff] could not be reserved
>system 00:08: [mem 0xfff00000-0xffffffff] has been reserved
>system 00:0a: [io  0x0250-0x0253] has been reserved
>system 00:0a: [io  0x0256-0x025f] has been reserved
>system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
>system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
>system 00:0a: [mem 0xfec10000-0xfec17fff] has been reserved
>system 00:0a: [mem 0xfec18000-0xfec1ffff] has been reserved
>system 00:0a: [mem 0xfec20000-0xfec27fff] has been reserved
>system 00:0c: [mem 0xe0000000-0xe3ffffff] has been reserved
>system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
>system 00:0d: [mem 0x000c0000-0x000cffff] could not be reserved
>system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
>system 00:0d: [mem 0x00100000-0x3fffffff] could not be reserved
>pci 0000:00:1c.0: BAR 9: assigned [mem 0x40000000-0x401fffff 64bit pref]
>pci 0000:00:1c.1: BAR 9: assigned [mem 0x40200000-0x403fffff 64bit pref]
>pci 0000:00:1c.1: BAR 7: assigned [io  0x1000-0x1fff]
>pci 0000:00:01.0: PCI bridge to [bus 01-01]
>pci 0000:00:01.0:   bridge window [io  0x9000-0xbfff]
>pci 0000:00:01.0:   bridge window [mem 0xfdf00000-0xfdffffff]
>pci 0000:00:01.0:   bridge window [mem 0xbdf00000-0xddefffff 64bit pref]
>pci 0000:00:1c.0: PCI bridge to [bus 02-02]
>pci 0000:00:1c.0:   bridge window [io  0xc000-0xcfff]
>pci 0000:00:1c.0:   bridge window [mem 0xfe000000-0xfe0fffff]
>pci 0000:00:1c.0:   bridge window [mem 0x40000000-0x401fffff 64bit pref]
>pci 0000:00:1c.1: PCI bridge to [bus 03-03]
>pci 0000:00:1c.1:   bridge window [io  0x1000-0x1fff]
>pci 0000:00:1c.1:   bridge window [mem 0xfe100000-0xfe1fffff]
>pci 0000:00:1c.1:   bridge window [mem 0x40200000-0x403fffff 64bit pref]
>pci 0000:00:1c.2: PCI bridge to [bus 04-05]
>pci 0000:00:1c.2:   bridge window [io  0xd000-0xdfff]
>pci 0000:00:1c.2:   bridge window [mem 0xfe200000-0xfe9fffff]
>pci 0000:00:1c.2:   bridge window [mem 0xddf00000-0xdfefffff 64bit pref]
>pci 0000:00:1e.0: PCI bridge to [bus 06-06]
>pci 0000:00:1e.0:   bridge window [io  disabled]
>pci 0000:00:1e.0:   bridge window [mem 0xfea00000-0xfeafffff]
>pci 0000:00:1e.0:   bridge window [mem pref disabled]
>pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:01.0: setting latency timer to 64
>pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:1c.0: setting latency timer to 64
>pci 0000:00:1c.1: enabling device (0106 -> 0107)
>pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>pci 0000:00:1c.1: setting latency timer to 64
>pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>pci 0000:00:1c.2: setting latency timer to 64
>pci 0000:00:1e.0: setting latency timer to 64
>pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
>pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
>pci_bus 0000:01: resource 0 [io  0x9000-0xbfff]
>pci_bus 0000:01: resource 1 [mem 0xfdf00000-0xfdffffff]
>pci_bus 0000:01: resource 2 [mem 0xbdf00000-0xddefffff 64bit pref]
>pci_bus 0000:02: resource 0 [io  0xc000-0xcfff]
>pci_bus 0000:02: resource 1 [mem 0xfe000000-0xfe0fffff]
>pci_bus 0000:02: resource 2 [mem 0x40000000-0x401fffff 64bit pref]
>pci_bus 0000:03: resource 0 [io  0x1000-0x1fff]
>pci_bus 0000:03: resource 1 [mem 0xfe100000-0xfe1fffff]
>pci_bus 0000:03: resource 2 [mem 0x40200000-0x403fffff 64bit pref]
>pci_bus 0000:04: resource 0 [io  0xd000-0xdfff]
>pci_bus 0000:04: resource 1 [mem 0xfe200000-0xfe9fffff]
>pci_bus 0000:04: resource 2 [mem 0xddf00000-0xdfefffff 64bit pref]
>pci_bus 0000:06: resource 1 [mem 0xfea00000-0xfeafffff]
>pci_bus 0000:06: resource 3 [io  0x0000-0xffff]
>pci_bus 0000:06: resource 4 [mem 0x00000000-0xffffffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>UDP hash table entries: 512 (order: 2, 16384 bytes)
>UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
>NET: Registered protocol family 1
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>RPC: Registered tcp NFSv4.1 backchannel transport module.
>pci 0000:01:00.0: Boot video device
>PCI: CLS 32 bytes, default 64
>Simple Boot Flag at 0x52 set to 0x1
>microcode: CPU0 sig=0x6f6, pf=0x20, revision=0xc7
>microcode: CPU1 sig=0x6f6, pf=0x20, revision=0xc7
>microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
>audit: initializing netlink socket (disabled)
>type=2000 audit(1266350980.331:1): initialized
>highmem bounce pool size: 64 pages
>HugeTLB registered 4 MB page size, pre-allocated 0 pages
>DLM (built Feb 16 2010 19:50:16) installed
>Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>Slow work thread pool: Starting up
>Slow work thread pool: Ready
>NTFS driver 2.1.29 [Flags: R/W].
>fuse init (API version 7.13)
>Btrfs loaded
>msgmni has been set to 1738
>alg: No test for stdrng (krng)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler cfq registered (default)
>pcieport 0000:00:01.0: setting latency timer to 64
>pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
>pcieport 0000:00:1c.0: setting latency timer to 64
>pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
>pcieport 0000:00:1c.1: setting latency timer to 64
>pcieport 0000:00:1c.1: irq 26 for MSI/MSI-X
>pcieport 0000:00:1c.2: setting latency timer to 64
>pcieport 0000:00:1c.2: irq 27 for MSI/MSI-X
>ACPI: AC Adapter [AC0] (on-line)
>input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
>ACPI: Lid Switch [LID]
>input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
>ACPI: Power Button [PWRB]
>input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
>ACPI: Sleep Button [SLPB]
>input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
>ACPI: Power Button [PWRF]
>ACPI: SSDT 3ffb9210 00D24 (v01    AMI   CPU1PM 00000001 INTL 02002026)
>Marking TSC unstable due to TSC halts in idle
>Switching to clocksource hpet
>ACPI Warning: Incorrect checksum in table [SSDT] - 2B, should be 6E (20091214/tbutils-314)
>ACPI: SSDT 3ffb9f40 00D24 (v01    AMI   CPU2PM 00000001 INTL 02002026)
>thermal LNXTHERM:01: registered as thermal_zone0
>ACPI: Thermal Zone [THRM] (55 C)
>ACPI: Battery Slot [BAT0] (battery present)
>Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds).
>Hangcheck: Using get_cycles().
>tpm_tis 00:0b: 1.2 TPM (device-id 0xB, rev-id 16)
>floppy0: no floppy controllers found
>brd: module loaded
>loop: module loaded
>Loading iSCSI transport class v2.0-870.
>ata_piix 0000:00:1f.2: version 2.13
>ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
>ata_piix 0000:00:1f.2: setting latency timer to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
>ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
>Intel(R) PRO/1000 Network Driver - version 7.3.21-k5-NAPI
>Copyright (c) 1999-2006 Intel Corporation.
>PPP generic driver version 2.4.2
>PPP Deflate Compression module registered
>PPP BSD Compression module registered
>PPP MPPE Compression module registered
>NET: Registered protocol family 24
>r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
>r8169 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>r8169 0000:02:00.0: setting latency timer to 64
>r8169 0000:02:00.0: irq 28 for MSI/MSI-X
>eth0: RTL8168b/8111b at 0xf80bc000, 00:1a:92:be:19:b9, XID 18000000 IRQ 28
>ohci1394 0000:06:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[16]  MMIO=[feaff800-feafffff]  Max Packet=[2048]  IR/IT contexts=[4/4]
>video1394: Installed video1394 module
>ieee1394: raw1394: /dev/raw1394 device initialized
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>ehci_hcd 0000:00:1d.7: setting latency timer to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1d.7: using broken periodic workaround
>ehci_hcd 0000:00:1d.7: debug port 1
>ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
>ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfebfbc00
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>uhci_hcd: USB Universal Host Controller Interface driver
>uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>uhci_hcd 0000:00:1d.0: setting latency timer to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000ec00
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>uhci_hcd 0000:00:1d.1: setting latency timer to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e880
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>uhci_hcd 0000:00:1d.2: setting latency timer to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e800
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
>uhci_hcd 0000:00:1d.3: setting latency timer to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e480
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>usbcore: registered new interface driver usblp
>Initializing USB Mass Storage driver...
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>usbcore: registered new interface driver libusual
>usbcore: registered new interface driver ums-alauda
>usbcore: registered new interface driver ums-datafab
>usbcore: registered new interface driver ums-freecom
>usbcore: registered new interface driver ums-isd200
>usbcore: registered new interface driver ums-jumpshot
>usbcore: registered new interface driver ums-karma
>usbcore: registered new interface driver ums-sddr09
>usbcore: registered new interface driver ums-sddr55
>usbcore: registered new interface driver ums-usbat
>usbcore: registered new interface driver usbserial
>USB Serial support registered for generic
>usbcore: registered new interface driver usbserial_generic
>usbserial: USB Serial Driver core
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
>i8042.c: Detected active multiplexing controller, rev 1.1.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX0 port at 0x60,0x64 irq 12
>serio: i8042 AUX1 port at 0x60,0x64 irq 12
>serio: i8042 AUX2 port at 0x60,0x64 irq 12
>serio: i8042 AUX3 port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>rtc_cmos 00:03: RTC can wake from S4
>rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
>i2c /dev entries driver
>i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>ACPI: I/O resource 0000:00:1f.3 [0x400-0x41f] conflicts with ACPI region SMB0 [0x400-0x40f]
>ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>Linux video capture interface: v2.00
>device-mapper: ioctl: 4.16.0-ioctl (2009-11-05) initialised: dm-devel@redhat.com
>Bluetooth: Generic Bluetooth USB driver ver 0.6
>usbcore: registered new interface driver btusb
>cpuidle: using governor ladder
>cpuidle: using governor menu
>sdhci: Secure Digital Host Controller Interface driver
>sdhci: Copyright(c) Pierre Ossman
>sdhci-pci 0000:06:01.1: SDHCI controller found [1180:0822] (rev 19)
>sdhci-pci 0000:06:01.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>Registered led device: mmc0::
>mmc0: SDHCI controller on PCI [0000:06:01.1] using PIO
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>usbhid: USB HID core driver
>asus_laptop: Asus Laptop Support version 0.42
>asus_laptop:   F3JP model detected
>input: Asus Laptop extra buttons as /devices/virtual/input/input4
>Registered led device: asus::touchpad
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
>HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>HDA Intel 0000:00:1b.0: irq 29 for MSI/MSI-X
>HDA Intel 0000:00:1b.0: setting latency timer to 64
>ata1.00: ATA-7: Hitachi HTS541680J9SA00, SB2OC70P, max UDMA/100
>ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata1.00: configured for UDMA/100
>scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54168 SB2O PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda:
>ata2.00: ATAPI: TSSTcorpCD/DVDW TS-L632D, AS05, max UDMA/33
> sda1 sda2 sda3 sda4 <
>ata2.00: configured for UDMA/33
> sda5
>hda_codec: ALC660-VD: BIOS auto-probing.
>ALSA device list:
>  #0: HDA Intel at 0xfebfc000 irq 29
>oprofile: using NMI interrupt.
>nf_conntrack version 0.5.0 (16080 buckets, 64320 max)
>ip_tables: (C) 2000-2006 Netfilter Core Team
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 10
>IPv6 over IPv4 tunneling driver
>NET: Registered protocol family 17
>NET: Registered protocol family 15
>Bluetooth: L2CAP ver 2.14
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM ver 1.11
>SCTP: Hash tables configured (established 65536 bind 65536)
>Using IPI No-Shortcut mode
>rtc_cmos 00:03: setting system clock to 2010-02-16 20:09:45 UTC (1266350985)
> sda6 sda7 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>scsi 1:0:0:0: CD-ROM            TSSTcorp CD/DVDW TS-L632D AS05 PQ: 0 ANSI: 5
>sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>sr 1:0:0:0: Attached scsi generic sg1 type 5
>usb 1-8: new high speed USB device using ehci_hcd and address 4
>usb 3-2: new low speed USB device using uhci_hcd and address 2
>Synaptics Touchpad, model: 1, fw: 6.1, id: 0xa3a0b3, caps: 0xa04713/0x10008
>input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input6
>kjournald starting.  Commit interval 5 seconds
>input: Microsft Microsoft Wireless Desktop Receiver 3.1 as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input7
>microsoft 0003:045E:00F9.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsft Microsoft Wireless Desktop Receiver 3.1] on usb-0000:00:1d.1-2/input0
>EXT3-fs (sda5): mounted filesystem with writeback data mode
>VFS: Mounted root (ext3 filesystem) readonly on device 8:5.
>Freeing unused kernel memory: 408k freed
>Write protecting the kernel text: 6368k
>Write protecting the kernel read-only data: 1700k
>microsoft 0003:045E:00F9.0002: fixing up Microsoft Wireless Receiver Model 1028 report descriptor
>input: Microsft Microsoft Wireless Desktop Receiver 3.1 as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.1/input/input8
>microsoft 0003:045E:00F9.0002: input,hidraw1: USB HID v1.11 Mouse [Microsft Microsoft Wireless Desktop Receiver 3.1] on usb-0000:00:1d.1-2/input1
>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00e018000386182b]
>usb 4-1: new full speed USB device using uhci_hcd and address 2
>EXT3-fs (sda5): using internal journal
>udev: starting version 151
>Linux agpgart interface v0.103
>[drm] Initialized drm 1.1.0 20060810
>cfg80211: Using static regulatory domain info
>cfg80211: Regulatory domain: 00
>    (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>    (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
>    (2457000 KHz - 2482000 KHz @ 20000 KHz), (600 mBi, 2000 mBm)
>    (2474000 KHz - 2494000 KHz @ 20000 KHz), (600 mBi, 2000 mBm)
>    (5170000 KHz - 5250000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
>    (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
>cfg80211: Calling CRDA to update world regulatory domain
>cfg80211: Calling CRDA for country: EU
>[drm] radeon kernel modesetting enabled.
>radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>radeon 0000:01:00.0: setting latency timer to 64
>[drm] radeon: Initializing kernel modesetting.
>[drm] register mmio base: 0xFDFF0000
>[drm] register mmio size: 65536
>ATOM BIOS: ASUS
>[drm] GPU reset succeed (RBBM_STATUS=0x10000140)
>[drm] Generation 2 PCI interface, using max accessible memory
>[drm] radeon: VRAM 256M
>[drm] radeon: VRAM from 0x00000000 to 0x0FFFFFFF
>[drm] radeon: GTT 512M
>[drm] radeon: GTT from 0x20000000 to 0x3FFFFFFF
>radeon 0000:01:00.0: irq 30 for MSI/MSI-X
>[drm] radeon: using MSI.
>[drm] radeon: irq initialized.
>[drm] Detected VRAM RAM=256M, BAR=256M
>[drm] RAM width 128bits DDR
>[TTM] Zone  kernel: Available graphics memory: 445304 kiB.
>[TTM] Zone highmem: Available graphics memory: 514764 kiB.
>[drm] radeon: 256M of VRAM memory ready
>[drm] radeon: 512M of GTT memory ready.
>[drm] GART: num cpu pages 131072, num gpu pages 131072
>[drm] radeon: 1 quad pipes, 2 z pipes initialized.
>[drm] PCIE GART of 512M enabled (table at 0x00040000).
>[drm] radeon: cp idle (0x10000C03)
>[drm] Loading R500 Microcode
>platform radeon_cp.0: firmware: requesting radeon/R520_cp.bin
>iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 2.6.33-rc7-ks
>iwl3945: Copyright(c) 2003-2009 Intel Corporation
>iwl3945 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>iwl3945 0000:03:00.0: setting latency timer to 64
>iwl3945 0000:03:00.0: Tunable channels: 11 802.11bg, 13 802.11a channels
>iwl3945 0000:03:00.0: Detected Intel Wireless WiFi Link 3945ABG
>iwl3945 0000:03:00.0: irq 31 for MSI/MSI-X
>phy0: Selected rate control algorithm 'iwl-3945-rs'
>[drm] radeon: ring at 0x0000000020000000
>[drm] ring test succeeded in 3 usecs
>[drm] radeon: ib pool ready.
>[drm] ib test succeeded in 0 usecs
>[drm] Default TV standard: NTSC
>[drm] Radeon Display Connectors
>[drm] Connector 0:
>[drm]   VGA
>[drm]   DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
>[drm]   Encoders:
>[drm]     CRT1: INTERNAL_KLDSCP_DAC1
>[drm] Connector 1:
>[drm]   LVDS
>[drm]   DDC: 0x7e30 0x7e30 0x7e34 0x7e34 0x7e38 0x7e38 0x7e3c 0x7e3c
>[drm]   Encoders:
>[drm]     LCD1: INTERNAL_LVTM1
>[drm] Connector 2:
>[drm]   S-video
>[drm]   Encoders:
>[drm]     TV1: INTERNAL_KLDSCP_DAC2
>[drm] Connector 3:
>[drm]   DVI-I
>[drm]   HPD1
>[drm]   DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
>[drm]   Encoders:
>[drm]     DFP1: INTERNAL_KLDSCP_TMDS1
>[drm] fb mappable at 0xC00C0000
>[drm] vram apper at 0xC0000000
>[drm] size 5242880
>[drm] fb depth is 24
>[drm]    pitch is 5120
>fb0: radeondrmfb frame buffer device
>registered panic notifier
>[drm] Initialized radeon 2.0.0 20080528 for 0000:01:00.0 on minor 0
>EXT3-fs (sda5): using internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs (dm-3): using internal journal
>EXT3-fs (dm-3): mounted filesystem with writeback data mode
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs (dm-1): using internal journal
>EXT3-fs (dm-1): mounted filesystem with writeback data mode
>REISERFS (device dm-2): found reiserfs format "3.6" with standard journal
>REISERFS (device dm-2): using ordered data mode
>REISERFS (device dm-2): journal params: device dm-2, size 8125, journal first block 66, max trans len 256, max batch 225, max commit age 30, max trans age 30
>REISERFS (device dm-2): checking transaction log (dm-2)
>REISERFS (device dm-2): Using r5 hash to sort names
>EXT4-fs (dm-4): mounted filesystem with ordered data mode
>Bluetooth: BNEP (Ethernet Emulation) ver 1.3
>Bluetooth: BNEP filters: protocol multicast
>Bluetooth: SCO (Voice Link) ver 0.6
>Bluetooth: SCO socket layer initialized
>Adding 1959888k swap on /dev/sda6.  Priority:-1 extents:1 across:1959888k 
>r8169: eth0: link up
>r8169: eth0: link up
>[drm:drm_mode_getfb] *ERROR* invalid framebuffer id
>eth0: no IPv6 routers present
>[drm:drm_mode_getfb] *ERROR* invalid framebuffer id
>[drm:drm_mode_getfb] *ERROR* invalid framebuffer id
>[drm:drm_mode_getfb] *ERROR* invalid framebuffer id
>[drm:drm_mode_getfb] *ERROR* invalid framebuffer id
>[drm:drm_mode_getfb] *ERROR* invalid framebuffer id

Actions: View

Attachments on bug 26596: 33341 | 33342 | 33343

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.