Attachment 34822 Details for Bug 26733 – dmesg output

dmesg output

dmesg (text/plain), 69.12 KB, created by Tavian Barnes on 2010-04-08 11:49:27 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Tavian Barnes

Created: 2010-04-08 11:49:27 UTC

Size: 69.12 KB

patch

obsolete

>Linux version 2.6.34-rc3-00946-g088b525-dirty (tavianator@superfluid) (gcc version 4.4.3 20100316 (prerelease) (GCC) ) #1 SMP PREEMPT Sun Apr 4 23:42:20 EDT 2010
>Command line: BOOT_IMAGE=/vmlinuz26-nouveau-git root=/dev/mapper/vg0-root ro
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009e400 (usable)
> BIOS-e820: 000000000009e400 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000cfe70000 (usable)
> BIOS-e820: 00000000cfe70000 - 00000000cfe8a000 (ACPI data)
> BIOS-e820: 00000000cfe8a000 - 00000000cfe8d000 (ACPI NVS)
> BIOS-e820: 00000000cfe8d000 - 00000000d0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
> BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
>NX (Execute Disable) protection: active
>DMI present.
>Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
>e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
>e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
>e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
>No AGP bridge found
>last_pfn = 0x130000 max_arch_pfn = 0x400000000
>MTRR default type: uncachable
>MTRR fixed ranges enabled:
>  00000-9FFFF write-back
>  A0000-BFFFF uncachable
>  C0000-C7FFF write-protect
>  C8000-DFFFF uncachable
>  E0000-FFFFF write-protect
>MTRR variable ranges enabled:
>  0 base 000000000 mask F80000000 write-back
>  1 base 080000000 mask FC0000000 write-back
>  2 base 0C0000000 mask FF0000000 write-back
>  3 base 100000000 mask FE0000000 write-back
>  4 base 120000000 mask FF0000000 write-back
>  5 disabled
>  6 disabled
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
>last_pfn = 0xcfe70 max_arch_pfn = 0x400000000
>Scanning 0 areas for low memory corruption
>modified physical RAM map:
> modified: 0000000000000000 - 0000000000010000 (reserved)
> modified: 0000000000010000 - 000000000009e400 (usable)
> modified: 000000000009e400 - 00000000000a0000 (reserved)
> modified: 00000000000dc000 - 0000000000100000 (reserved)
> modified: 0000000000100000 - 00000000cfe70000 (usable)
> modified: 00000000cfe70000 - 00000000cfe8a000 (ACPI data)
> modified: 00000000cfe8a000 - 00000000cfe8d000 (ACPI NVS)
> modified: 00000000cfe8d000 - 00000000d0000000 (reserved)
> modified: 00000000fec00000 - 00000000fec10000 (reserved)
> modified: 00000000fee00000 - 00000000fee01000 (reserved)
> modified: 00000000ff000000 - 0000000100000000 (reserved)
> modified: 0000000100000000 - 0000000130000000 (usable)
>initial memory mapped : 0 - 20000000
>found SMP MP-table at [ffff8800000f7d00] f7d00
>init_memory_mapping: 0000000000000000-00000000cfe70000
> 0000000000 - 00cfe00000 page 2M
> 00cfe00000 - 00cfe70000 page 4k
>kernel direct mapping tables up to cfe70000 @ 16000-1c000
>init_memory_mapping: 0000000100000000-0000000130000000
> 0100000000 - 0130000000 page 2M
>kernel direct mapping tables up to 130000000 @ 1a000-20000
>RAMDISK: 37d2c000 - 37ff0000
>ACPI: RSDP 00000000000f7c50 00024 (v02 PTLTD )
>ACPI: XSDT 00000000cfe7f1b0 000A4 (v01 MSTEST TESTONLY 06040000  LTP 00000000)
>ACPI: FACP 00000000cfe89c19 000F4 (v03 INTEL           06040000 PTL  00000003)
>ACPI: DSDT 00000000cfe82371 07834 (v01  INTEL BR_WATER 06040000 MSFT 03000001)
>ACPI: FACS 00000000cfe8cfc0 00040
>ACPI: TCPA 00000000cfe89d0d 00032 (v01 Phoeni  x       06040000  TL  00000000)
>ACPI: MCFG 00000000cfe89d3f 0003C (v01 PTLTD    MCFG   06040000  LTP 00000000)
>ACPI: APIC 00000000cfe89d7b 00084 (v01 PTLTD  ? APIC   06040000  LTP 00000000)
>ACPI: BOOT 00000000cfe89dff 00028 (v01 PTLTD  $SBFTBL$ 06040000  LTP 00000001)
>ACPI: SLIC 00000000cfe89e27 00176 (v01 MSTEST TESTONLY 06040000  LTP 00000000)
>ACPI: ASF! 00000000cfe89f9d 00063 (v16   CETP     CETP 06040000 PTL  00000001)
>ACPI: SSDT 00000000cfe80ae3 0025F (v01  PmRef  Cpu0Tst 00003000 INTL 20050228)
>ACPI: SSDT 00000000cfe80a3d 000A6 (v01  PmRef  Cpu7Tst 00003000 INTL 20050228)
>ACPI: SSDT 00000000cfe80997 000A6 (v01  PmRef  Cpu6Tst 00003000 INTL 20050228)
>ACPI: SSDT 00000000cfe808f1 000A6 (v01  PmRef  Cpu5Tst 00003000 INTL 20050228)
>ACPI: SSDT 00000000cfe8084b 000A6 (v01  PmRef  Cpu4Tst 00003000 INTL 20050228)
>ACPI: SSDT 00000000cfe807a5 000A6 (v01  PmRef  Cpu3Tst 00003000 INTL 20050228)
>ACPI: SSDT 00000000cfe806ff 000A6 (v01  PmRef  Cpu2Tst 00003000 INTL 20050228)
>ACPI: SSDT 00000000cfe80659 000A6 (v01  PmRef  Cpu1Tst 00003000 INTL 20050228)
>ACPI: SSDT 00000000cfe7f254 01405 (v01  PmRef    CpuPm 00003000 INTL 20050228)
>ACPI: Local APIC address 0xfee00000
> [ffffea0000000000-ffffea00043fffff] PMD -> [ffff880002000000-ffff8800059fffff] on node 0
>Zone PFN ranges:
>  DMA      0x00000010 -> 0x00001000
>  DMA32    0x00001000 -> 0x00100000
>  Normal   0x00100000 -> 0x00130000
>Movable zone start PFN for each node
>early_node_map[3] active PFN ranges
>    0: 0x00000010 -> 0x0000009e
>    0: 0x00000100 -> 0x000cfe70
>    0: 0x00100000 -> 0x00130000
>On node 0 totalpages: 1048062
>  DMA zone: 56 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 3926 pages, LIFO batch:0
>  DMA32 zone: 14280 pages used for memmap
>  DMA32 zone: 833192 pages, LIFO batch:31
>  Normal zone: 2688 pages used for memmap
>  Normal zone: 193920 pages, LIFO batch:31
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
>ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Using ACPI (MADT) for SMP configuration information
>SMP: Allowing 4 CPUs, 0 hotplug CPUs
>nr_irqs_gsi: 24
>early_res array is doubled to 64 at [1b200 - 1b9ff]
>PM: Registered nosave memory: 000000000009e000 - 000000000009f000
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
>PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
>PM: Registered nosave memory: 00000000cfe70000 - 00000000cfe8a000
>PM: Registered nosave memory: 00000000cfe8a000 - 00000000cfe8d000
>PM: Registered nosave memory: 00000000cfe8d000 - 00000000d0000000
>PM: Registered nosave memory: 00000000d0000000 - 00000000fec00000
>PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
>PM: Registered nosave memory: 00000000fec10000 - 00000000fee00000
>PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
>PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
>PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
>Allocating PCI resources starting at d0000000 (gap: d0000000:2ec00000)
>Booting paravirtualized kernel on bare hardware
>setup_percpu: NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:4 nr_node_ids:1
>PERCPU: Embedded 28 pages/cpu @ffff880001800000 s83304 r8192 d23192 u524288
>pcpu-alloc: s83304 r8192 d23192 u524288 alloc=1*2097152
>pcpu-alloc: [0] 0 1 2 3 
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1031038
>Kernel command line: BOOT_IMAGE=/vmlinuz26-nouveau-git root=/dev/mapper/vg0-root ro
>PID hash table entries: 4096 (order: 3, 32768 bytes)
>Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
>Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
>xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
>Checking aperture...
>No AGP bridge found
>Calgary: detecting Calgary via BIOS EBDA area
>Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>early_res array is doubled to 128 at [1ba00 - 1c9ff]
>Subtract (58 early reservations)
>  #1 [0001000000 - 000161ded8]   TEXT DATA BSS
>  #2 [0037d2c000 - 0037ff0000]         RAMDISK
>  #3 [000161e000 - 000161e158]             BRK
>  #4 [00000f7d10 - 0000100000]   BIOS reserved
>  #5 [00000f7d00 - 00000f7d10]    MP-table mpf
>  #6 [000009e400 - 000009e971]   BIOS reserved
>  #7 [000009eb85 - 00000f7d00]   BIOS reserved
>  #8 [000009e971 - 000009eb85]    MP-table mpc
>  #9 [0000010000 - 0000012000]      TRAMPOLINE
>  #10 [0000012000 - 0000016000]     ACPI WAKEUP
>  #11 [0000016000 - 000001a000]         PGTABLE
>  #12 [000001a000 - 000001b000]         PGTABLE
>  #13 [000161e180 - 000161f180]         BOOTMEM
>  #14 [000001b000 - 000001b200]         BOOTMEM
>  #15 [0001e20000 - 0001e21000]         BOOTMEM
>  #16 [0001e21000 - 0001e22000]         BOOTMEM
>  #17 [0002000000 - 0005a00000]        MEMMAP 0
>  #18 [000161f180 - 0001637180]         BOOTMEM
>  #19 [0001637180 - 000164f180]         BOOTMEM
>  #20 [000164f180 - 0001667180]         BOOTMEM
>  #21 [0001668000 - 0001669000]         BOOTMEM
>  #22 [000161df00 - 000161df43]         BOOTMEM
>  #23 [0001667180 - 0001667420]         BOOTMEM
>  #24 [000161df80 - 000161dfe8]         BOOTMEM
>  #25 [0001667440 - 00016674a8]         BOOTMEM
>  #26 [00016674c0 - 0001667528]         BOOTMEM
>  #27 [0001667540 - 00016675a8]         BOOTMEM
>  #28 [00016675c0 - 0001667628]         BOOTMEM
>  #29 [0001667640 - 00016676a8]         BOOTMEM
>  #30 [00016676c0 - 0001667728]         BOOTMEM
>  #31 [0001667740 - 00016677a8]         BOOTMEM
>  #32 [00016677c0 - 0001667828]         BOOTMEM
>  #33 [0001667840 - 00016678a8]         BOOTMEM
>  #34 [00016678c0 - 0001667928]         BOOTMEM
>  #35 [0001667940 - 0001667960]         BOOTMEM
>  #36 [0001667980 - 00016679a0]         BOOTMEM
>  #37 [00016679c0 - 00016679ff]         BOOTMEM
>  #38 [0001667a00 - 0001667a3f]         BOOTMEM
>  #39 [0001800000 - 000181c000]         BOOTMEM
>  #40 [0001880000 - 000189c000]         BOOTMEM
>  #41 [0001900000 - 000191c000]         BOOTMEM
>  #42 [0001980000 - 000199c000]         BOOTMEM
>  #43 [0001667a40 - 0001667a48]         BOOTMEM
>  #44 [0001667a80 - 0001667a88]         BOOTMEM
>  #45 [0001667ac0 - 0001667ad0]         BOOTMEM
>  #46 [0001667b00 - 0001667b20]         BOOTMEM
>  #47 [0001667b40 - 0001667c70]         BOOTMEM
>  #48 [0001667c80 - 0001667cd0]         BOOTMEM
>  #49 [0001667d00 - 0001667d50]         BOOTMEM
>  #50 [0001669000 - 0001671000]         BOOTMEM
>  #51 [000199c000 - 0001d9c000]         BOOTMEM
>  #52 [0005a00000 - 0005c00000]         BOOTMEM
>  #53 [0001667d80 - 0001667fc0]         BOOTMEM
>  #54 [0005c00000 - 0009c00000]         BOOTMEM
>  #55 [0001671000 - 0001691000]         BOOTMEM
>  #56 [0001691000 - 00016d1000]         BOOTMEM
>  #57 [000001ca00 - 0000024a00]         BOOTMEM
>Memory: 4050824k/4980736k available (3058k kernel code, 788488k absent, 141424k reserved, 1632k data, 468k init)
>SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
>Hierarchical RCU implementation.
>NR_IRQS:768
>Extended CMOS year: 2000
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Fast TSC calibration using PIT
>Detected 2992.963 MHz processor.
>Calibrating delay loop (skipped), value calculated using timer frequency.. 5988.33 BogoMIPS (lpj=9976543)
>Security Framework initialized
>Mount-cache hash table entries: 256
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>mce: CPU supports 6 MCE banks
>CPU0: Thermal monitoring handled by SMI
>using mwait in idle threads.
>Performance Events: Core2 events, Intel PMU driver.
>... version:                2
>... bit width:              40
>... generic registers:      2
>... value mask:             000000ffffffffff
>... max period:             000000007fffffff
>... fixed-purpose events:   3
>... event mask:             0000000700000003
>ACPI: Core revision 20100121
>Setting APIC routing to flat
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>CPU0: Intel(R) Core(TM)2 Quad CPU    Q9650  @ 3.00GHz stepping 0a
>Booting Node   0, Processors  #1
>CPU1: Thermal monitoring handled by SMI
> #2
>CPU2: Thermal monitoring handled by SMI
> #3 Ok.
>CPU3: Thermal monitoring handled by SMI
>Brought up 4 CPUs
>Total of 4 processors activated (23949.29 BogoMIPS).
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: MMCONFIG for domain 0000 [bus 00-0c] at [mem 0xf0000000-0xf0cfffff] (base 0xf0000000)
>PCI: not using MMCONFIG
>PCI: Using configuration type 1 for base access
>bio: create slab <bio-0> at 0
>ACPI: EC: Look up EC in DSDT
>ACPI: SSDT 00000000cfe80d42 001DD (v01  PmRef  Cpu0Ist 00003000 INTL 20050228)
>ACPI: SSDT 00000000cfe80f1f 0016E (v01  PmRef  Cpu1Ist 00003000 INTL 20050228)
>ACPI: SSDT 00000000cfe8108d 0016E (v01  PmRef  Cpu2Ist 00003000 INTL 20050228)
>ACPI: SSDT 00000000cfe811fb 0016E (v01  PmRef  Cpu3Ist 00003000 INTL 20050228)
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>PCI: MMCONFIG for domain 0000 [bus 00-0c] at [mem 0xf0000000-0xf0cfffff] (base 0xf0000000)
>PCI: MMCONFIG at [mem 0xf0000000-0xf0cfffff] reserved in ACPI motherboard resources
>ACPI: EC: GPE = 0x1e, I/O: command/status = 0x66, data = 0x62
>ACPI: No dock devices found.
>PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>ACPI Warning for \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20100121/nspredef-352)
>\_SB_.PCI0:_OSC evaluation returned wrong type
>_OSC request data:1 8 1f 
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7]
>pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
>pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000d3fff]
>pci_root PNP0A03:00: host bridge window [mem 0x000d4000-0x000d7fff]
>pci_root PNP0A03:00: host bridge window [mem 0x000d8000-0x000dbfff]
>pci_root PNP0A03:00: host bridge window [mem 0xd0000000-0xfebffbff]
>pci_root PNP0A03:00: host bridge window [io  0x0d00-0xfdff]
>pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:01.0: PME# disabled
>pci 0000:00:1a.0: reg 20: [io  0x1820-0x183f]
>pci 0000:00:1a.1: reg 20: [io  0x1840-0x185f]
>pci 0000:00:1a.7: reg 10: [mem 0xe4504000-0xe45043ff]
>pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1a.7: PME# disabled
>pci 0000:00:1b.0: reg 10: [mem 0xe4500000-0xe4503fff 64bit]
>pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1b.0: PME# disabled
>pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.0: PME# disabled
>pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.1: PME# disabled
>pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.2: PME# disabled
>pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.3: PME# disabled
>pci 0000:00:1d.0: reg 20: [io  0x1860-0x187f]
>pci 0000:00:1d.1: reg 20: [io  0x1880-0x189f]
>pci 0000:00:1d.2: reg 20: [io  0x18a0-0x18bf]
>pci 0000:00:1d.7: reg 10: [mem 0xe4504400-0xe45047ff]
>pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1d.7: PME# disabled
>pci 0000:00:1f.0: quirk: [io  0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
>pci 0000:00:1f.0: quirk: [io  0x1180-0x11bf] claimed by ICH6 GPIO
>pci 0000:00:1f.2: reg 10: [io  0x1c30-0x1c37]
>pci 0000:00:1f.2: reg 14: [io  0x1c24-0x1c27]
>pci 0000:00:1f.2: reg 18: [io  0x1c28-0x1c2f]
>pci 0000:00:1f.2: reg 1c: [io  0x1c20-0x1c23]
>pci 0000:00:1f.2: reg 20: [io  0x18f0-0x18ff]
>pci 0000:00:1f.2: reg 24: [io  0x18e0-0x18ef]
>pci 0000:00:1f.2: PME# supported from D3hot
>pci 0000:00:1f.2: PME# disabled
>pci 0000:00:1f.3: reg 10: [mem 0xe4504800-0xe45048ff]
>pci 0000:00:1f.3: reg 20: [io  0x18c0-0x18df]
>pci 0000:00:1f.5: reg 10: [io  0x1c48-0x1c4f]
>pci 0000:00:1f.5: reg 14: [io  0x1c3c-0x1c3f]
>pci 0000:00:1f.5: reg 18: [io  0x1c40-0x1c47]
>pci 0000:00:1f.5: reg 1c: [io  0x1c38-0x1c3b]
>pci 0000:00:1f.5: reg 20: [io  0x1c10-0x1c1f]
>pci 0000:00:1f.5: reg 24: [io  0x1c00-0x1c0f]
>pci 0000:00:1f.5: PME# supported from D3hot
>pci 0000:00:1f.5: PME# disabled
>pci 0000:01:00.0: reg 10: [mem 0xe0300000-0xe0303fff]
>pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
>pci 0000:01:00.0: PME# disabled
>pci 0000:00:01.0: PCI bridge to [bus 01-04]
>pci 0000:00:01.0:   bridge window [io  0x2000-0x2fff]
>pci 0000:00:01.0:   bridge window [mem 0xe0300000-0xe3ffffff]
>pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
>pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
>pci 0000:02:00.0: PME# disabled
>pci 0000:02:01.0: PME# supported from D0 D3hot D3cold
>pci 0000:02:01.0: PME# disabled
>pci 0000:01:00.0: PCI bridge to [bus 02-04]
>pci 0000:01:00.0:   bridge window [io  0x2000-0x2fff]
>pci 0000:01:00.0:   bridge window [mem 0xe1000000-0xe3ffffff]
>pci 0000:01:00.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
>pci 0000:02:00.0: PCI bridge to [bus 03-03]
>pci 0000:02:00.0:   bridge window [io  0xf000-0x0000] (disabled)
>pci 0000:02:00.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
>pci 0000:02:00.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
>pci 0000:04:00.0: reg 10: [mem 0xe1000000-0xe1ffffff]
>pci 0000:04:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
>pci 0000:04:00.0: reg 1c: [mem 0xe2000000-0xe3ffffff 64bit]
>pci 0000:04:00.0: reg 24: [io  0x2000-0x207f]
>pci 0000:04:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
>pci 0000:02:01.0: PCI bridge to [bus 04-04]
>pci 0000:02:01.0:   bridge window [io  0x2000-0x2fff]
>pci 0000:02:01.0:   bridge window [mem 0xe1000000-0xe3ffffff]
>pci 0000:02:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
>pci 0000:00:1c.0: PCI bridge to [bus 05-06]
>pci 0000:00:1c.0:   bridge window [io  0x0000-0x0000] (disabled)
>pci 0000:00:1c.0:   bridge window [mem 0xe0200000-0xe02fffff]
>pci 0000:00:1c.0:   bridge window [mem 0xe0000000-0xe01fffff 64bit pref]
>pci 0000:07:00.0: reg 10: [io  0x4000-0x40ff]
>pci 0000:07:00.0: reg 18: [mem 0xe4000000-0xe4000fff 64bit]
>pci 0000:07:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
>pci 0000:07:00.0: supports D1 D2
>pci 0000:07:00.0: PME# supported from D1 D2 D3hot D3cold
>pci 0000:07:00.0: PME# disabled
>pci 0000:00:1c.1: PCI bridge to [bus 07-08]
>pci 0000:00:1c.1:   bridge window [io  0x4000-0x4fff]
>pci 0000:00:1c.1:   bridge window [mem 0xe4000000-0xe40fffff]
>pci 0000:00:1c.1:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
>pci 0000:09:00.0: reg 10: [mem 0xe4100000-0xe4101fff 64bit]
>pci 0000:09:00.0: PME# supported from D0 D3hot D3cold
>pci 0000:09:00.0: PME# disabled
>pci 0000:00:1c.2: PCI bridge to [bus 09-0a]
>pci 0000:00:1c.2:   bridge window [io  0xf000-0x0000] (disabled)
>pci 0000:00:1c.2:   bridge window [mem 0xe4100000-0xe41fffff]
>pci 0000:00:1c.2:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
>pci 0000:0b:00.0: reg 10: [io  0x50f8-0x50ff]
>pci 0000:0b:00.0: reg 14: [io  0x50dc-0x50df]
>pci 0000:0b:00.0: reg 18: [io  0x50f0-0x50f7]
>pci 0000:0b:00.0: reg 1c: [io  0x50d8-0x50db]
>pci 0000:0b:00.0: reg 20: [io  0x50e0-0x50ef]
>pci 0000:0b:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
>pci 0000:00:1c.3: PCI bridge to [bus 0b-0c]
>pci 0000:00:1c.3:   bridge window [io  0x5000-0x5fff]
>pci 0000:00:1c.3:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
>pci 0000:00:1c.3:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
>pci 0000:0d:07.0: reg 10: [mem 0xe4207000-0xe4207fff]
>pci 0000:0d:07.0: supports D1 D2
>pci 0000:0d:07.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:0d:07.0: PME# disabled
>pci 0000:0d:07.1: reg 10: [mem 0xe4209000-0xe42097ff]
>pci 0000:0d:07.1: reg 14: [mem 0xe4200000-0xe4203fff]
>pci 0000:0d:07.1: supports D1 D2
>pci 0000:0d:07.1: PME# supported from D0 D1 D2 D3hot
>pci 0000:0d:07.1: PME# disabled
>pci 0000:0d:07.2: reg 10: [mem 0xe4208000-0xe4208fff]
>pci 0000:0d:07.2: supports D1 D2
>pci 0000:0d:07.2: PME# supported from D0 D1 D2 D3hot
>pci 0000:0d:07.2: PME# disabled
>pci 0000:0d:07.3: reg 10: [mem 0xe4209800-0xe42098ff]
>pci 0000:0d:07.3: supports D1 D2
>pci 0000:0d:07.3: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:0d:07.3: PME# disabled
>pci 0000:00:1e.0: PCI bridge to [bus 0d-0d] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [io  0xf000-0x0000] (disabled)
>pci 0000:00:1e.0:   bridge window [mem 0xe4200000-0xe42fffff]
>pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
>pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [mem 0xd0000000-0xfebffbff] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [io  0x0d00-0xfdff] (subtractive decode)
>pci_bus 0000:0e: [bus 0e-11] partially hidden behind transparent bridge 0000:0d [bus 0d-0d]
>pci_bus 0000:00: on NUMA node 0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG_._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
>ACPI Warning for \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20100121/nspredef-352)
>\_SB_.PCI0:_OSC evaluation returned wrong type
>_OSC request data:1 19 1f 
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>vgaarb: device added: PCI:0000:04:00.0,decodes=io+mem,owns=io+mem,locks=none
>vgaarb: loaded
>PCI: Using ACPI for IRQ routing
>PCI: pci_cache_line_size set to 64 bytes
>reserve RAM buffer: 000000000009e400 - 000000000009ffff 
>reserve RAM buffer: 00000000cfe70000 - 00000000cfffffff 
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>Switching to clocksource tsc
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 9 devices
>ACPI: ACPI bus type pnp unregistered
>system 00:01: [io  0x0600-0x063f] has been reserved
>system 00:01: [io  0x0800-0x080f] has been reserved
>system 00:01: [io  0x1000-0x107f] has been reserved
>system 00:01: [io  0x1180-0x11bf] has been reserved
>system 00:01: [io  0x04d0-0x04d1] has been reserved
>system 00:01: [io  0xfe00] has been reserved
>system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
>system 00:01: [mem 0xf0000000-0xf3ffffff] has been reserved
>system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
>system 00:01: [mem 0xfed45000-0xfed89fff] has been reserved
>system 00:01: [mem 0xfef00000-0xfeffffff] has been reserved
>PCI: max bus depth: 3 pci_try_num: 4
>pci 0000:00:1e.0: BAR 15: assigned [mem 0xe8000000-0xebffffff pref]
>pci 0000:00:1c.1: BAR 15: assigned [mem 0xe4300000-0xe44fffff pref]
>pci 0000:00:1c.2: BAR 15: assigned [mem 0xe4600000-0xe47fffff 64bit pref]
>pci 0000:00:1c.3: BAR 14: assigned [mem 0xe4800000-0xe49fffff]
>pci 0000:00:1c.3: BAR 15: assigned [mem 0xe4a00000-0xe4bfffff pref]
>pci 0000:00:1c.0: BAR 13: assigned [io  0x3000-0x3fff]
>pci 0000:00:1c.2: BAR 13: assigned [io  0x6000-0x6fff]
>pci 0000:00:1e.0: BAR 13: assigned [io  0x7000-0x7fff]
>pci 0000:02:00.0: PCI bridge to [bus 03-03]
>pci 0000:02:00.0:   bridge window [io  disabled]
>pci 0000:02:00.0:   bridge window [mem disabled]
>pci 0000:02:00.0:   bridge window [mem pref disabled]
>pci 0000:04:00.0: BAR 6: can't assign mem pref (size 0x20000)
>pci 0000:02:01.0: PCI bridge to [bus 04-04]
>pci 0000:02:01.0:   bridge window [io  0x2000-0x2fff]
>pci 0000:02:01.0:   bridge window [mem 0xe1000000-0xe3ffffff]
>pci 0000:02:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
>pci 0000:01:00.0: PCI bridge to [bus 02-04]
>pci 0000:01:00.0:   bridge window [io  0x2000-0x2fff]
>pci 0000:01:00.0:   bridge window [mem 0xe1000000-0xe3ffffff]
>pci 0000:01:00.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
>pci 0000:00:01.0: PCI bridge to [bus 01-04]
>pci 0000:00:01.0:   bridge window [io  0x2000-0x2fff]
>pci 0000:00:01.0:   bridge window [mem 0xe0300000-0xe3ffffff]
>pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
>pci 0000:00:1c.0: PCI bridge to [bus 05-06]
>pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
>pci 0000:00:1c.0:   bridge window [mem 0xe0200000-0xe02fffff]
>pci 0000:00:1c.0:   bridge window [mem 0xe0000000-0xe01fffff 64bit pref]
>pci 0000:07:00.0: BAR 6: assigned [mem 0xe4300000-0xe431ffff pref]
>pci 0000:00:1c.1: PCI bridge to [bus 07-08]
>pci 0000:00:1c.1:   bridge window [io  0x4000-0x4fff]
>pci 0000:00:1c.1:   bridge window [mem 0xe4000000-0xe40fffff]
>pci 0000:00:1c.1:   bridge window [mem 0xe4300000-0xe44fffff pref]
>pci 0000:00:1c.2: PCI bridge to [bus 09-0a]
>pci 0000:00:1c.2:   bridge window [io  0x6000-0x6fff]
>pci 0000:00:1c.2:   bridge window [mem 0xe4100000-0xe41fffff]
>pci 0000:00:1c.2:   bridge window [mem 0xe4600000-0xe47fffff 64bit pref]
>pci 0000:0b:00.0: BAR 6: assigned [mem 0xe4a00000-0xe4a0ffff pref]
>pci 0000:00:1c.3: PCI bridge to [bus 0b-0c]
>pci 0000:00:1c.3:   bridge window [io  0x5000-0x5fff]
>pci 0000:00:1c.3:   bridge window [mem 0xe4800000-0xe49fffff]
>pci 0000:00:1c.3:   bridge window [mem 0xe4a00000-0xe4bfffff pref]
>pci 0000:0d:07.0: BAR 15: assigned [mem 0xe8000000-0xebffffff pref]
>pci 0000:0d:07.0: BAR 16: assigned [mem 0xec000000-0xefffffff]
>pci 0000:0d:07.0: BAR 13: assigned [io  0x7000-0x70ff]
>pci 0000:0d:07.0: BAR 14: assigned [io  0x7400-0x74ff]
>pci 0000:0d:07.0: CardBus bridge to [bus 0e-11]
>pci 0000:0d:07.0:   bridge window [io  0x7000-0x70ff]
>pci 0000:0d:07.0:   bridge window [io  0x7400-0x74ff]
>pci 0000:0d:07.0:   bridge window [mem 0xe8000000-0xebffffff pref]
>pci 0000:0d:07.0:   bridge window [mem 0xec000000-0xefffffff]
>pci 0000:00:1e.0: PCI bridge to [bus 0d-0d]
>pci 0000:00:1e.0:   bridge window [io  0x7000-0x7fff]
>pci 0000:00:1e.0:   bridge window [mem 0xe4200000-0xe42fffff]
>pci 0000:00:1e.0:   bridge window [mem 0xe8000000-0xebffffff pref]
>pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:01.0: setting latency timer to 64
>pci 0000:01:00.0: setting latency timer to 64
>pci 0000:02:00.0: setting latency timer to 64
>pci 0000:02:01.0: setting latency timer to 64
>pci 0000:00:1c.0: enabling device (0000 -> 0003)
>pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:1c.0: setting latency timer to 64
>pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>pci 0000:00:1c.1: setting latency timer to 64
>pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>pci 0000:00:1c.2: setting latency timer to 64
>pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
>pci 0000:00:1c.3: setting latency timer to 64
>pci 0000:00:1e.0: setting latency timer to 64
>pci 0000:0d:07.0: enabling device (0004 -> 0007)
>pci 0000:0d:07.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
>pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
>pci_bus 0000:00: resource 6 [mem 0x000d0000-0x000d3fff]
>pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
>pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
>pci_bus 0000:00: resource 9 [mem 0xd0000000-0xfebffbff]
>pci_bus 0000:00: resource 10 [io  0x0d00-0xfdff]
>pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
>pci_bus 0000:01: resource 1 [mem 0xe0300000-0xe3ffffff]
>pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
>pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
>pci_bus 0000:02: resource 1 [mem 0xe1000000-0xe3ffffff]
>pci_bus 0000:02: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
>pci_bus 0000:04: resource 0 [io  0x2000-0x2fff]
>pci_bus 0000:04: resource 1 [mem 0xe1000000-0xe3ffffff]
>pci_bus 0000:04: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
>pci_bus 0000:05: resource 0 [io  0x3000-0x3fff]
>pci_bus 0000:05: resource 1 [mem 0xe0200000-0xe02fffff]
>pci_bus 0000:05: resource 2 [mem 0xe0000000-0xe01fffff 64bit pref]
>pci_bus 0000:07: resource 0 [io  0x4000-0x4fff]
>pci_bus 0000:07: resource 1 [mem 0xe4000000-0xe40fffff]
>pci_bus 0000:07: resource 2 [mem 0xe4300000-0xe44fffff pref]
>pci_bus 0000:09: resource 0 [io  0x6000-0x6fff]
>pci_bus 0000:09: resource 1 [mem 0xe4100000-0xe41fffff]
>pci_bus 0000:09: resource 2 [mem 0xe4600000-0xe47fffff 64bit pref]
>pci_bus 0000:0b: resource 0 [io  0x5000-0x5fff]
>pci_bus 0000:0b: resource 1 [mem 0xe4800000-0xe49fffff]
>pci_bus 0000:0b: resource 2 [mem 0xe4a00000-0xe4bfffff pref]
>pci_bus 0000:0d: resource 0 [io  0x7000-0x7fff]
>pci_bus 0000:0d: resource 1 [mem 0xe4200000-0xe42fffff]
>pci_bus 0000:0d: resource 2 [mem 0xe8000000-0xebffffff pref]
>pci_bus 0000:0d: resource 4 [io  0x0000-0x0cf7]
>pci_bus 0000:0d: resource 5 [mem 0x000a0000-0x000bffff]
>pci_bus 0000:0d: resource 6 [mem 0x000d0000-0x000d3fff]
>pci_bus 0000:0d: resource 7 [mem 0x000d4000-0x000d7fff]
>pci_bus 0000:0d: resource 8 [mem 0x000d8000-0x000dbfff]
>pci_bus 0000:0d: resource 9 [mem 0xd0000000-0xfebffbff]
>pci_bus 0000:0d: resource 10 [io  0x0d00-0xfdff]
>pci_bus 0000:0e: resource 0 [io  0x7000-0x70ff]
>pci_bus 0000:0e: resource 1 [io  0x7400-0x74ff]
>pci_bus 0000:0e: resource 2 [mem 0xe8000000-0xebffffff pref]
>pci_bus 0000:0e: resource 3 [mem 0xec000000-0xefffffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 262144 bind 65536)
>TCP reno registered
>UDP hash table entries: 2048 (order: 4, 65536 bytes)
>UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
>NET: Registered protocol family 1
>pci 0000:00:1a.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
>pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
>pci 0000:04:00.0: Boot video device
>PCI: CLS 32 bytes, default 64
>Unpacking initramfs...
>Freeing initrd memory: 2832k freed
>PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>Placing 64MB software IO TLB between ffff880005c00000 - ffff880009c00000
>software IO TLB at phys 0x5c00000 - 0x9c00000
>Simple Boot Flag at 0x36 set to 0x1
>Scanning for low memory corruption every 60 seconds
>audit: initializing netlink socket (disabled)
>type=2000 audit(1270490006.515:1): initialized
>VFS: Disk quotas dquot_6.5.2
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>msgmni has been set to 7917
>alg: No test for stdrng (krng)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
>io scheduler noop registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pcieport 0000:00:01.0: setting latency timer to 64
>pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
>pcieport 0000:00:1c.0: setting latency timer to 64
>pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
>pcieport 0000:00:1c.1: setting latency timer to 64
>pcieport 0000:00:1c.1: irq 26 for MSI/MSI-X
>pcieport 0000:00:1c.2: setting latency timer to 64
>pcieport 0000:00:1c.2: irq 27 for MSI/MSI-X
>pcieport 0000:00:1c.3: setting latency timer to 64
>pcieport 0000:00:1c.3: irq 28 for MSI/MSI-X
>pcieport 0000:00:01.0: Requesting control of PCIe PME from ACPI BIOS
>ACPI Warning for \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20100121/nspredef-352)
>\_SB_.PCI0:_OSC evaluation returned wrong type
>_OSC request data:1 0 1f 
>pcieport 0000:00:01.0: Failed to receive control of PCIe PME service: ACPI _OSC failed
>pcie_pme: probe of 0000:00:01.0:pcie01 failed with error -13
>pcieport 0000:00:1c.0: Requesting control of PCIe PME from ACPI BIOS
>ACPI Warning for \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20100121/nspredef-352)
>\_SB_.PCI0:_OSC evaluation returned wrong type
>_OSC request data:1 0 1f 
>pcieport 0000:00:1c.0: Failed to receive control of PCIe PME service: ACPI _OSC failed
>pcie_pme: probe of 0000:00:1c.0:pcie01 failed with error -13
>pcieport 0000:00:1c.1: Requesting control of PCIe PME from ACPI BIOS
>ACPI Warning for \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20100121/nspredef-352)
>\_SB_.PCI0:_OSC evaluation returned wrong type
>_OSC request data:1 0 1f 
>pcieport 0000:00:1c.1: Failed to receive control of PCIe PME service: ACPI _OSC failed
>pcie_pme: probe of 0000:00:1c.1:pcie01 failed with error -13
>pcieport 0000:00:1c.2: Requesting control of PCIe PME from ACPI BIOS
>ACPI Warning for \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20100121/nspredef-352)
>\_SB_.PCI0:_OSC evaluation returned wrong type
>_OSC request data:1 0 1f 
>pcieport 0000:00:1c.2: Failed to receive control of PCIe PME service: ACPI _OSC failed
>pcie_pme: probe of 0000:00:1c.2:pcie01 failed with error -13
>pcieport 0000:00:1c.3: Requesting control of PCIe PME from ACPI BIOS
>ACPI Warning for \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20100121/nspredef-352)
>\_SB_.PCI0:_OSC evaluation returned wrong type
>_OSC request data:1 0 1f 
>pcieport 0000:00:1c.3: Failed to receive control of PCIe PME service: ACPI _OSC failed
>pcie_pme: probe of 0000:00:1c.3:pcie01 failed with error -13
>Linux agpgart interface v0.103
>Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
>PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
>i8042.c: Detected active multiplexing controller, rev 1.1.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX0 port at 0x60,0x64 irq 12
>serio: i8042 AUX1 port at 0x60,0x64 irq 12
>serio: i8042 AUX2 port at 0x60,0x64 irq 12
>serio: i8042 AUX3 port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>cpuidle: using governor ladder
>cpuidle: using governor menu
>TCP cubic registered
>NET: Registered protocol family 17
>PM: Resume from disk failed.
>registered taskstats version 1
>Freeing unused kernel memory: 468k freed
>input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/PNP0C0C:00/input/input0
>ACPI: Power Button [PWRB]
>input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/PNP0C0E:00/input/input1
>ACPI: Sleep Button [SLPB]
>input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/PNP0C0D:00/input/input2
>ACPI: Lid Switch [LID]
>input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
>ACPI: Power Button [PWRF]
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
>[drm] Initialized drm 1.1.0 20060810
>nouveau 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>nouveau 0000:04:00.0: setting latency timer to 64
>[drm] nouveau 0000:04:00.0: Detected an NV50 generation card (0x092580a2)
>[drm] nouveau 0000:04:00.0: Attempting to load BIOS image from PRAMIN
>[drm] nouveau 0000:04:00.0: ... appears to be valid
>[drm] nouveau 0000:04:00.0: BIT BIOS found
>[drm] nouveau 0000:04:00.0: Bios version 62.92.34.00
>[drm] nouveau 0000:04:00.0: TMDS table revision 2.0 not currently supported
>[drm] nouveau 0000:04:00.0: Found Display Configuration Block version 4.0
>[drm] nouveau 0000:04:00.0: Raw DCB entry 0: 01000323 00010034
>[drm] nouveau 0000:04:00.0: Raw DCB entry 1: 02011312 00020030
>[drm] nouveau 0000:04:00.0: Raw DCB entry 2: 02033300 00000028
>[drm] nouveau 0000:04:00.0: Raw DCB entry 3: 010443f1 00c0c080
>[drm] nouveau 0000:04:00.0: Raw DCB entry 4: 0104c3f1 00c0c080
>[drm] nouveau 0000:04:00.0: DCB connector table: VHER 0x40 5 16 4
>[drm] nouveau 0000:04:00.0:   0: 0x00000040: type 0x40 idx 0 tag 0xff
>[drm] nouveau 0000:04:00.0:   1: 0x00001131: type 0x31 idx 1 tag 0x07
>[drm] nouveau 0000:04:00.0:   2: 0x00002231: type 0x31 idx 2 tag 0x08
>[drm] nouveau 0000:04:00.0:   3: 0x00000300: type 0x00 idx 3 tag 0xff
>[drm] nouveau 0000:04:00.0:   4: 0x00000410: type 0x10 idx 4 tag 0xff
>[drm] nouveau 0000:04:00.0:   5: 0x00000411: type 0x11 idx 5 tag 0xff
>[drm] nouveau 0000:04:00.0:   6: 0x00000413: type 0x13 idx 6 tag 0xff
>[drm] nouveau 0000:04:00.0:   7: 0x00010547: type 0x47 idx 7 tag 0x51
>[drm] nouveau 0000:04:00.0:   8: 0x00000631: type 0x31 idx 8 tag 0xff
>[drm] nouveau 0000:04:00.0:   9: 0x00001731: type 0x31 idx 9 tag 0x07
>[drm] nouveau 0000:04:00.0:   10: 0x00002831: type 0x31 idx 10 tag 0x08
>[drm] nouveau 0000:04:00.0:   11: 0x00000900: type 0x00 idx 11 tag 0xff
>[drm] nouveau 0000:04:00.0:   12: 0x00000a10: type 0x10 idx 12 tag 0xff
>[drm] nouveau 0000:04:00.0:   13: 0x00000a11: type 0x11 idx 13 tag 0xff
>[drm] nouveau 0000:04:00.0:   14: 0x00000a13: type 0x13 idx 14 tag 0xff
>[drm] nouveau 0000:04:00.0:   15: 0x00010b31: type 0x31 idx 15 tag 0x51
>[drm] nouveau 0000:04:00.0: Parsing VBIOS init table 0 at offset 0xCC9E
>[drm] nouveau 0000:04:00.0: Parsing VBIOS init table 1 at offset 0xD069
>[drm] nouveau 0000:04:00.0: Parsing VBIOS init table 2 at offset 0xDDE4
>[drm] nouveau 0000:04:00.0: Parsing VBIOS init table 3 at offset 0xDF06
>[drm] nouveau 0000:04:00.0: Parsing VBIOS init table 4 at offset 0xE136
>[drm] nouveau 0000:04:00.0: Parsing VBIOS init table at offset 0xE19B
>[drm] nouveau 0000:04:00.0: 0xE19B: Condition still not met after 20ms, skipping following opcodes
>[drm] nouveau 0000:04:00.0: 0xB4E8: parsing output script 0
>[drm] nouveau 0000:04:00.0: 0xB7CE: parsing output script 0
>[drm] nouveau 0000:04:00.0: 0xA3CC: parsing output script 0
>[drm] nouveau 0000:04:00.0: 0xA3CC: parsing output script 0
>[drm] nouveau 0000:04:00.0: Detected 512MiB VRAM
>[TTM] Zone  kernel: Available graphics memory: 2027062 kiB.
>[drm] nouveau 0000:04:00.0: 512 MiB GART (aperture)
>[drm] nouveau 0000:04:00.0: Allocating FIFO number 1
>[drm] nouveau 0000:04:00.0: nouveau_channel_alloc: initialised FIFO 1
>[drm] nouveau 0000:04:00.0: Detected a LVDS output
>[drm] nouveau 0000:04:00.0: Detected a TMDS output
>[drm] nouveau 0000:04:00.0: Detected a DAC output
>[drm] nouveau 0000:04:00.0: DCB encoder 1 unknown
>[drm] nouveau 0000:04:00.0: DCB encoder 1 unknown
>[drm] nouveau 0000:04:00.0: Detected a LVDS connector
>composite sync not supported
>[drm] nouveau 0000:04:00.0: Detected a DVI-D connector
>[drm] nouveau 0000:04:00.0: Detected a DVI-D connector
>[drm] nouveau 0000:04:00.0:   no encoders, ignoring
>[drm] nouveau 0000:04:00.0: Detected a VGA connector
>[drm] nouveau 0000:04:00.0: Detected a TV connector
>[drm] nouveau 0000:04:00.0:   no encoders, ignoring
>[drm] nouveau 0000:04:00.0: Detected an eDP connector
>[drm] nouveau 0000:04:00.0:   no encoders, ignoring
>[drm] nouveau 0000:04:00.0: Detected a DVI-D connector
>[drm] nouveau 0000:04:00.0:   no encoders, ignoring
>[drm] nouveau 0000:04:00.0: Detected a DVI-D connector
>[drm] nouveau 0000:04:00.0:   no encoders, ignoring
>[drm] nouveau 0000:04:00.0: Detected a DVI-D connector
>[drm] nouveau 0000:04:00.0:   no encoders, ignoring
>[drm] nouveau 0000:04:00.0: Detected a VGA connector
>[drm] nouveau 0000:04:00.0:   no encoders, ignoring
>[drm] nouveau 0000:04:00.0: Detected a TV connector
>[drm] nouveau 0000:04:00.0:   no encoders, ignoring
>[drm] nouveau 0000:04:00.0: Detected a DVI-D connector
>[drm] nouveau 0000:04:00.0:   no encoders, ignoring
>composite sync not supported
>[drm] nouveau 0000:04:00.0: allocated 1920x1200 fb: 0x40250000, bo ffff88012e35b600
>[drm] nouveau 0000:04:00.0: 0xB4EC: parsing output script 1
>[drm] nouveau 0000:04:00.0: 0xB3D5: parsing clock script 0
>Console: switching to colour frame buffer device 240x75
>fb0: nouveaufb frame buffer device
>registered panic notifier
>[drm] Initialized nouveau 0.0.16 20090420 for 0000:04:00.0 on minor 0
>SCSI subsystem initialized
>libata version 3.00 loaded.
>pata_acpi 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>pata_acpi 0000:00:1f.2: setting latency timer to 64
>pata_acpi 0000:00:1f.2: PCI INT B disabled
>pata_acpi 0000:00:1f.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>pata_acpi 0000:00:1f.5: setting latency timer to 64
>pata_acpi 0000:00:1f.5: PCI INT C disabled
>pata_acpi 0000:0b:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
>pata_acpi 0000:0b:00.0: setting latency timer to 64
>pata_acpi 0000:0b:00.0: PCI INT A disabled
>ata_piix 0000:00:1f.2: version 2.13
>ata_piix 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
>pata_jmicron 0000:0b:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
>pata_jmicron 0000:0b:00.0: setting latency timer to 64
>scsi0 : pata_jmicron
>scsi1 : pata_jmicron
>ata1: PATA max UDMA/100 cmd 0x50f8 ctl 0x50dc bmdma 0x50e0 irq 19
>ata2: PATA max UDMA/100 cmd 0x50f0 ctl 0x50d8 bmdma 0x50e8 irq 19
>ata_piix 0000:00:1f.2: setting latency timer to 64
>scsi2 : ata_piix
>scsi3 : ata_piix
>ata3: SATA max UDMA/133 cmd 0x1c30 ctl 0x1c24 bmdma 0x18f0 irq 17
>ata4: SATA max UDMA/133 cmd 0x1c28 ctl 0x1c20 bmdma 0x18f8 irq 17
>ata_piix 0000:00:1f.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
>[drm] nouveau 0000:04:00.0: 0xB4E3: parsing clock script 1
>ata1.00: ATAPI: TSSTcorp CDDVDW TS-L632H, TMC0, max UDMA/33
>ata1.00: configured for UDMA/33
>scsi 0:0:0:0: CD-ROM            TSSTcorp CDDVDW TS-L632H  TMC0 PQ: 0 ANSI: 5
>ata_piix 0000:00:1f.5: setting latency timer to 64
>scsi4 : ata_piix
>scsi5 : ata_piix
>ata5: SATA max UDMA/133 cmd 0x1c48 ctl 0x1c3c bmdma 0x1c10 irq 18
>ata6: SATA max UDMA/133 cmd 0x1c40 ctl 0x1c38 bmdma 0x1c18 irq 18
>ata6: SATA link down (SStatus 0 SControl 300)
>ata5: link resume succeeded after 1 retries
>ata5: SATA link down (SStatus 0 SControl 300)
>ata4.00: SATA link down (SStatus 0 SControl 300)
>ata4.01: SATA link down (SStatus 0 SControl 300)
>ata3.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata3.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata3.00: ATA-8: TOSHIBA MK2049GSY, LC000A, max UDMA/100
>ata3.00: 390721968 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata3.01: ATA-8: TOSHIBA MK2049GSY, LC000A, max UDMA/100
>ata3.01: 390721968 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata3.00: configured for UDMA/100
>ata3.01: configured for UDMA/100
>scsi 2:0:0:0: Direct-Access     ATA      TOSHIBA MK2049GS LC00 PQ: 0 ANSI: 5
>scsi 2:0:1:0: Direct-Access     ATA      TOSHIBA MK2049GS LC00 PQ: 0 ANSI: 5
>sd 2:0:0:0: [sda] 390721968 512-byte logical blocks: (200 GB/186 GiB)
>sd 2:0:1:0: [sdb] 390721968 512-byte logical blocks: (200 GB/186 GiB)
>sd 2:0:1:0: [sdb] Write Protect is off
>sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00
>sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1
>sd 2:0:0:0: [sda] Write Protect is off
>sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2
>sd 2:0:1:0: [sdb] Attached SCSI disk
>sd 2:0:0:0: [sda] Attached SCSI disk
>sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 0:0:0:0: Attached scsi CD-ROM sr0
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
>EXT4-fs (dm-2): INFO: recovery required on readonly filesystem
>EXT4-fs (dm-2): write access will be enabled during recovery
>EXT4-fs (dm-2): recovery complete
>EXT4-fs (dm-2): mounted filesystem with ordered data mode
>rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, y3k, 114 bytes nvram
>udev: starting version 151
>sr 0:0:0:0: Attached scsi generic sg0 type 5
>sd 2:0:0:0: Attached scsi generic sg1 type 0
>sd 2:0:1:0: Attached scsi generic sg2 type 0
>input: PC Speaker as /devices/platform/pcspkr/input/input5
>r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
>r8169 0000:07:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>r8169 0000:07:00.0: setting latency timer to 64
>r8169 0000:07:00.0: irq 29 for MSI/MSI-X
>r8169 0000:07:00.0: eth0: RTL8168b/8111b at 0xffffc900047bc000, 00:90:f5:8b:3f:a5, XID 18000000 IRQ 29
>cfg80211: Calling CRDA to update world regulatory domain
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003)
>i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
> ram0: unknown partition table
>brd: module loaded
>iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
>iwlagn: Copyright(c) 2003-2010 Intel Corporation
>iwlagn 0000:09:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>iwlagn 0000:09:00.0: setting latency timer to 64
>iwlagn 0000:09:00.0: Detected Intel Wireless WiFi Link 5300AGN REV=0x24
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>ehci_hcd 0000:00:1a.7: setting latency timer to 64
>ehci_hcd 0000:00:1a.7: EHCI Host Controller
>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1a.7: debug port 1
>iTCO_vendor_support: vendor-support=0
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
>iTCO_wdt: Found a ICH8 or ICH8R TCO device (Version=2, TCOBASE=0x1060)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>uhci_hcd: USB Universal Host Controller Interface driver
>ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
>ehci_hcd 0000:00:1a.7: irq 18, io mem 0xe4504000
>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 4 ports detected
>uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>uhci_hcd 0000:00:1a.0: setting latency timer to 64
>uhci_hcd 0000:00:1a.0: UHCI Host Controller
>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>ehci_hcd 0000:00:1d.7: setting latency timer to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 3
>ehci_hcd 0000:00:1d.7: debug port 1
>fuse init (API version 7.13)
>ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
>ehci_hcd 0000:00:1d.7: irq 16, io mem 0xe4504400
>iwlagn 0000:09:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
>iwlagn 0000:09:00.0: irq 30 for MSI/MSI-X
>iwlagn 0000:09:00.0: firmware: requesting iwlwifi-5000-2.ucode
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 6 ports detected
>uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>uhci_hcd 0000:00:1a.1: setting latency timer to 64
>uhci_hcd 0000:00:1a.1: UHCI Host Controller
>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1a.1: irq 17, io base 0x00001840
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>uhci_hcd 0000:00:1d.0: setting latency timer to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001860
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>uhci_hcd 0000:00:1d.1: setting latency timer to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
>uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001880
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>uhci_hcd 0000:00:1d.2: setting latency timer to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 2 ports detected
>Synaptics Touchpad, model: 1, fw: 6.1, id: 0xa3a0b3, caps: 0xa04713/0x10008
>input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input6
>ACPI: AC Adapter [ADP0] (on-line)
>ACPI: Battery Slot [BAT0] (battery present)
>firewire_ohci 0000:0d:07.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>iwlagn 0000:09:00.0: loaded firmware version 8.24.2.12
>ACPI: WMI: Mapper loaded
>firewire_ohci: Added fw-ohci device 0000:0d:07.1, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
>yenta_cardbus 0000:0d:07.0: CardBus bridge found [1558:0902]
>yenta_cardbus 0000:0d:07.0: Enabling burst memory read transactions
>yenta_cardbus 0000:0d:07.0: Using CSCINT to route CSC interrupts to PCI
>yenta_cardbus 0000:0d:07.0: Routing CardBus interrupts to PCI
>yenta_cardbus 0000:0d:07.0: TI: mfunc 0x01aa1b22, devctl 0x64
>usb 3-5: new high speed USB device using ehci_hcd and address 4
>sdhci: Secure Digital Host Controller Interface driver
>sdhci: Copyright(c) Pierre Ossman
>usbcore: registered new interface driver snd-usb-audio
>HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>HDA Intel 0000:00:1b.0: irq 31 for MSI/MSI-X
>HDA Intel 0000:00:1b.0: setting latency timer to 64
>input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:00/device:01/device:03/LNXVIDEO:01/input/input7
>ACPI: Video Device [VGA2] (multi-head: yes  rom: no  post: no)
>yenta_cardbus 0000:0d:07.0: ISA IRQ mask 0x0cf8, PCI irq 16
>yenta_cardbus 0000:0d:07.0: Socket status: 30000006
>pci_bus 0000:0d: Raising subordinate bus# of parent bus (#0d) from #0d to #11
>yenta_cardbus 0000:0d:07.0: pcmcia: parent PCI bridge window: [io  0x7000-0x7fff]
>yenta_cardbus 0000:0d:07.0: pcmcia: parent PCI bridge window: [mem 0xe4200000-0xe42fffff]
>pcmcia_socket pcmcia_socket0: cs: memory probe 0xe4200000-0xe42fffff: excluding 0xe4200000-0xe420ffff
>yenta_cardbus 0000:0d:07.0: pcmcia: parent PCI bridge window: [mem 0xe8000000-0xebffffff pref]
>pcmcia_socket pcmcia_socket0: cs: memory probe 0xe8000000-0xebffffff: excluding 0xe8000000-0xebffffff
>yenta_cardbus 0000:0d:07.0: pcmcia: parent PCI bridge window: [io  0x0000-0x0cf7]
>yenta_cardbus 0000:0d:07.0: pcmcia: parent PCI bridge window: [mem 0x000a0000-0x000bffff]
>pcmcia_socket pcmcia_socket0: cs: memory probe 0x0a0000-0x0bffff: clean.
>yenta_cardbus 0000:0d:07.0: pcmcia: parent PCI bridge window: [mem 0x000d0000-0x000d3fff]
>pcmcia_socket pcmcia_socket0: cs: memory probe 0x0d0000-0x0d3fff: clean.
>yenta_cardbus 0000:0d:07.0: pcmcia: parent PCI bridge window: [mem 0x000d4000-0x000d7fff]
>pcmcia_socket pcmcia_socket0: cs: memory probe 0x0d4000-0x0d7fff: clean.
>yenta_cardbus 0000:0d:07.0: pcmcia: parent PCI bridge window: [mem 0x000d8000-0x000dbfff]
>pcmcia_socket pcmcia_socket0: cs: memory probe 0x0d8000-0x0dbfff: clean.
>yenta_cardbus 0000:0d:07.0: pcmcia: parent PCI bridge window: [mem 0xd0000000-0xfebffbff]
>pcmcia_socket pcmcia_socket0: cs: memory probe 0xd0000000-0xfebffbff: excluding 0xd0000000-0xe4ffffff 0xe8000000-0xf3ffffff 0xfe800000-0xfeffffff
>yenta_cardbus 0000:0d:07.0: pcmcia: parent PCI bridge window: [io  0x0d00-0xfdff]
>sdhci-pci 0000:0d:07.3: SDHCI controller found [104c:803c] (rev 0)
>sdhci-pci 0000:0d:07.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
>Registered led device: mmc0::
>mmc0: SDHCI controller on PCI [0000:0d:07.3] using PIO
>tifm_7xx1 0000:0d:07.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>phy0: Selected rate control algorithm 'iwl-agn-rs'
>Initializing USB Mass Storage driver...
>scsi6 : usb-storage 3-5:1.0
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
>cfg80211: World regulatory domain updated:
>    (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>    (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>    (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>    (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>    (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>    (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>usb 5-1: new low speed USB device using uhci_hcd and address 2
>pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xcffff 0xdc000-0xfffff
>pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: excluding 0xa0000000-0xa0ffffff
>pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff
>firewire_core: created device fw0: GUID 080038560000003d, S400
>usbcore: registered new interface driver hiddev
>input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/input/input9
>generic-usb 0003:046D:C018.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-1/input0
>usbcore: registered new interface driver usbhid
>usbhid: USB HID core driver
>usb 6-1: new full speed USB device using uhci_hcd and address 2
>thermal LNXTHERM:01: registered as thermal_zone0
>ACPI: Thermal Zone [THM0] (57 C)
>usb 6-1: config 1 has an invalid descriptor of length 0, skipping remainder of the config
>usb 6-1: config 1 has 1 interface, different from the descriptor's value: 4
>skipping empty audio interface (v1)
>snd-usb-audio: probe of 6-1:1.0 failed with error -5
>scsi 6:0:0:0: Direct-Access     Hitachi  HDT721010SLA360       PQ: 0 ANSI: 2 CCS
>sd 6:0:0:0: Attached scsi generic sg3 type 0
>sd 6:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
>sd 6:0:0:0: [sdc] Write Protect is off
>sd 6:0:0:0: [sdc] Mode Sense: 34 00 00 00
>sd 6:0:0:0: [sdc] Assuming drive cache: write through
>sd 6:0:0:0: [sdc] Assuming drive cache: write through
> sdc: sdc1
>sd 6:0:0:0: [sdc] Assuming drive cache: write through
>sd 6:0:0:0: [sdc] Attached SCSI disk
>EXT4-fs (dm-1): mounted filesystem with ordered data mode
>EXT4-fs (dm-0): mounted filesystem with ordered data mode
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs (sda1): using internal journal
>EXT3-fs (sda1): mounted filesystem with writeback data mode
>r8169 0000:07:00.0: eth0: link up
>r8169 0000:07:00.0: eth0: link up
>composite sync not supported
>composite sync not supported
>[drm] nouveau 0000:04:00.0: Allocating FIFO number 2
>[drm] nouveau 0000:04:00.0: nouveau_channel_alloc: initialised FIFO 2
>EXT4-fs (sdc1): recovery complete
>EXT4-fs (sdc1): mounted filesystem with ordered data mode
>wlan0: Trigger new scan to find an IBSS to join
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>wlan0: Trigger new scan to find an IBSS to join
>wlan0: Creating new IBSS network, BSSID d6:fe:bf:50:53:02
>iwlagn 0000:09:00.0: Unable to find TIM Element in beacon
>iwlagn 0000:09:00.0: Unable to find TIM Element in beacon
>wlan0: no IPv6 routers present
>eth0: no IPv6 routers present
>CPUFREQ: Per core ondemand sysfs interface is deprecated - up_threshold
>composite sync not supported
>composite sync not supported
>composite sync not supported
>usb 6-1: USB disconnect, address 2
>usb 6-1: new full speed USB device using uhci_hcd and address 3
>input: Altec Lansing Technologies, Inc. Altec Lansing XT2 - USB Audio as /devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1:1.3/input/input10
>generic-usb 0003:04D2:9802.0002: input,hidraw1: USB HID v1.00 Device [Altec Lansing Technologies, Inc. Altec Lansing XT2 - USB Audio] on usb-0000:00:1d.1-1/input3
>ata3: clearing spurious IRQ
>ata3: clearing spurious IRQ
>usb 1-1: new high speed USB device using ehci_hcd and address 2
>ata3: clearing spurious IRQ
>ata3: clearing spurious IRQ
>usb 1-1: USB disconnect, address 2
>ata3: clearing spurious IRQ
>usb 1-1: new high speed USB device using ehci_hcd and address 3
>ata3: clearing spurious IRQ
>ata3: clearing spurious IRQ
>ata3: clearing spurious IRQ
>ata3: clearing spurious IRQ
>ata3: clearing spurious IRQ
>ata3: clearing spurious IRQ
>ata3: clearing spurious IRQ
>ata3: clearing spurious IRQ
>ata3: clearing spurious IRQ
>ata3: clearing spurious IRQ
>ata3: clearing spurious IRQ
>[drm] nouveau 0000:04:00.0: PFIFO_DMA_PUSHER - Ch 2
>[drm] nouveau 0000:04:00.0: nouveau_channel_free: freeing fifo 2
>[drm] nouveau 0000:04:00.0: Failed to idle channel 2.
>[drm] nouveau 0000:04:00.0: PFIFO_DMA_PUSHER - Ch 127
>vlc[10705]: segfault at 3eb7c980 ip 00007f23099d89af sp 00007f22fcd07910 error 4 in libc-2.11.1.so[7f23099a4000+14d000]
>Disabling lock debugging due to kernel taint
>Console: switching to colour VGA+ 80x25
>unregistered panic notifier
>[drm] nouveau 0000:04:00.0: nouveau_channel_free: freeing fifo 1
>[TTM] Zone  kernel: Used memory at exit: 0 kiB.
>[drm] Module unloaded
>nouveau 0000:04:00.0: setting latency timer to 64
>[drm] nouveau 0000:04:00.0: Detected an NV50 generation card (0x092580a2)
>[drm] nouveau 0000:04:00.0: Attempting to load BIOS image from PRAMIN
>[drm] nouveau 0000:04:00.0: ... appears to be valid
>[drm] nouveau 0000:04:00.0: BIT BIOS found
>[drm] nouveau 0000:04:00.0: Bios version 62.92.34.00
>[drm] nouveau 0000:04:00.0: TMDS table revision 2.0 not currently supported
>[drm] nouveau 0000:04:00.0: Found Display Configuration Block version 4.0
>[drm] nouveau 0000:04:00.0: Raw DCB entry 0: 01000323 00010034
>[drm] nouveau 0000:04:00.0: Raw DCB entry 1: 02011312 00020030
>[drm] nouveau 0000:04:00.0: Raw DCB entry 2: 02033300 00000028
>[drm] nouveau 0000:04:00.0: Raw DCB entry 3: 010443f1 00c0c080
>[drm] nouveau 0000:04:00.0: Raw DCB entry 4: 0104c3f1 00c0c080
>[drm] nouveau 0000:04:00.0: DCB connector table: VHER 0x40 5 16 4
>[drm] nouveau 0000:04:00.0:   0: 0x00000040: type 0x40 idx 0 tag 0xff
>[drm] nouveau 0000:04:00.0:   1: 0x00001131: type 0x31 idx 1 tag 0x07
>[drm] nouveau 0000:04:00.0:   2: 0x00002231: type 0x31 idx 2 tag 0x08
>[drm] nouveau 0000:04:00.0:   3: 0x00000300: type 0x00 idx 3 tag 0xff
>[drm] nouveau 0000:04:00.0:   4: 0x00000410: type 0x10 idx 4 tag 0xff
>[drm] nouveau 0000:04:00.0:   5: 0x00000411: type 0x11 idx 5 tag 0xff
>[drm] nouveau 0000:04:00.0:   6: 0x00000413: type 0x13 idx 6 tag 0xff
>[drm] nouveau 0000:04:00.0:   7: 0x00010547: type 0x47 idx 7 tag 0x51
>[drm] nouveau 0000:04:00.0:   8: 0x00000631: type 0x31 idx 8 tag 0xff
>[drm] nouveau 0000:04:00.0:   9: 0x00001731: type 0x31 idx 9 tag 0x07
>[drm] nouveau 0000:04:00.0:   10: 0x00002831: type 0x31 idx 10 tag 0x08
>[drm] nouveau 0000:04:00.0:   11: 0x00000900: type 0x00 idx 11 tag 0xff
>[drm] nouveau 0000:04:00.0:   12: 0x00000a10: type 0x10 idx 12 tag 0xff
>[drm] nouveau 0000:04:00.0:   13: 0x00000a11: type 0x11 idx 13 tag 0xff
>[drm] nouveau 0000:04:00.0:   14: 0x00000a13: type 0x13 idx 14 tag 0xff
>[drm] nouveau 0000:04:00.0:   15: 0x00010b31: type 0x31 idx 15 tag 0x51
>[drm] nouveau 0000:04:00.0: Parsing VBIOS init table 0 at offset 0xCC9E
>[drm] nouveau 0000:04:00.0: Parsing VBIOS init table 1 at offset 0xD069
>[drm] nouveau 0000:04:00.0: Parsing VBIOS init table 2 at offset 0xDDE4
>[drm] nouveau 0000:04:00.0: Parsing VBIOS init table 3 at offset 0xDF06
>[drm] nouveau 0000:04:00.0: Parsing VBIOS init table 4 at offset 0xE136
>[drm] nouveau 0000:04:00.0: Parsing VBIOS init table at offset 0xE19B
>[drm] nouveau 0000:04:00.0: 0xB4E8: parsing output script 0
>[drm] nouveau 0000:04:00.0: 0xB7CE: parsing output script 0
>[drm] nouveau 0000:04:00.0: 0xA3CC: parsing output script 0
>[drm] nouveau 0000:04:00.0: 0xA3CC: parsing output script 0
>[drm] nouveau 0000:04:00.0: Detected 512MiB VRAM
>[TTM] Zone  kernel: Available graphics memory: 2027062 kiB.
>[drm] nouveau 0000:04:00.0: 512 MiB GART (aperture)
>[drm] nouveau 0000:04:00.0: Allocating FIFO number 1
>[drm] nouveau 0000:04:00.0: nouveau_channel_alloc: initialised FIFO 1
>[drm] nouveau 0000:04:00.0: Detected a LVDS output
>[drm] nouveau 0000:04:00.0: Detected a TMDS output
>[drm] nouveau 0000:04:00.0: Detected a DAC output
>[drm] nouveau 0000:04:00.0: DCB encoder 1 unknown
>[drm] nouveau 0000:04:00.0: DCB encoder 1 unknown
>[drm] nouveau 0000:04:00.0: Detected a LVDS connector
>composite sync not supported
>[drm] nouveau 0000:04:00.0: Detected a DVI-D connector
>[drm] nouveau 0000:04:00.0: Detected a DVI-D connector
>[drm] nouveau 0000:04:00.0:   no encoders, ignoring
>[drm] nouveau 0000:04:00.0: Detected a VGA connector
>[drm] nouveau 0000:04:00.0: Detected a TV connector
>[drm] nouveau 0000:04:00.0:   no encoders, ignoring
>[drm] nouveau 0000:04:00.0: Detected an eDP connector
>[drm] nouveau 0000:04:00.0:   no encoders, ignoring
>[drm] nouveau 0000:04:00.0: Detected a DVI-D connector
>[drm] nouveau 0000:04:00.0:   no encoders, ignoring
>[drm] nouveau 0000:04:00.0: Detected a DVI-D connector
>[drm] nouveau 0000:04:00.0:   no encoders, ignoring
>[drm] nouveau 0000:04:00.0: Detected a DVI-D connector
>[drm] nouveau 0000:04:00.0:   no encoders, ignoring
>[drm] nouveau 0000:04:00.0: Detected a VGA connector
>[drm] nouveau 0000:04:00.0:   no encoders, ignoring
>[drm] nouveau 0000:04:00.0: Detected a TV connector
>[drm] nouveau 0000:04:00.0:   no encoders, ignoring
>[drm] nouveau 0000:04:00.0: Detected a DVI-D connector
>[drm] nouveau 0000:04:00.0:   no encoders, ignoring
>composite sync not supported
>[drm] nouveau 0000:04:00.0: allocated 1920x1200 fb: 0x40250000, bo ffff8801168b1800
>Console: switching to colour frame buffer device 240x75
>fb0: nouveaufb frame buffer device
>registered panic notifier
>[drm] Initialized nouveau 0.0.16 20090420 for 0000:04:00.0 on minor 0
>composite sync not supported
>composite sync not supported
>[drm] nouveau 0000:04:00.0: Allocating FIFO number 2
>[drm] nouveau 0000:04:00.0: nouveau_channel_alloc: initialised FIFO 2
>[drm] nouveau 0000:04:00.0: 0xB4EC: parsing output script 1
>[drm] nouveau 0000:04:00.0: 0xB3D5: parsing clock script 0
>[drm] nouveau 0000:04:00.0: 0xB4E3: parsing clock script 1
>composite sync not supported
>composite sync not supported
>composite sync not supported
>lt-png-test[1099]: segfault at 97aa00 ip 000000000097aa00 sp 00007fff362abc38 error 15
>lt-gl-test[1202]: segfault at a0e190 ip 0000000000a0e190 sp 00007fffd6d345b8 error 15
>lt-png-test[4833]: segfault at 2be4af0 ip 00002b3dbc6d19c7 sp 00007fffd7c22dc0 error 4 in libdimension.so.0.0.0[2b3dbc6cc000+15000]
>lt-gl-test[4941]: segfault at 38c0af0 ip 00002b62a90e49c7 sp 00007fff416dca50 error 4 in libdimension.so.0.0.0[2b62a90df000+15000]
>ata3: clearing spurious IRQ
>lt-png-test[17211]: segfault at 2aee35a4c4c0 ip 00002aee35a495e7 sp 00002aee3a1cf4c0 error 7 in libdimension.so.0.0.0[2aee35a44000+15000]
>lt-gl-test[17269]: segfault at 2b56a407b4c0 ip 00002b56a40785e7 sp 00002b56a8c824c0 error 7 in libdimension.so.0.0.0[2b56a4073000+15000]
>usb 1-1: USB disconnect, address 3
>usb 1-1: new high speed USB device using ehci_hcd and address 4
>ACPI: EC: GPE storm detected, transactions will use polling mode
>ata3: clearing spurious IRQ
>usb 1-1: USB disconnect, address 4
>ata3: clearing spurious IRQ
>usb 1-1: new high speed USB device using ehci_hcd and address 5
>usb 1-1: USB disconnect, address 5
>usb 1-1: new high speed USB device using ehci_hcd and address 6
>lt-png-test[25797]: segfault at 1e ip 00002b228fde8289 sp 00007fff384b1930 error 4 in libdimension.so.0.0.0[2b228fddb000+16000]
>lt-gl-test[25900]: segfault at 2b3b11492990 ip 00002b3b11492990 sp 00007fff9039adb8 error 15
>usb 1-1: USB disconnect, address 6
>ata3: clearing spurious IRQ
>usb 1-1: new high speed USB device using ehci_hcd and address 7
>usb 1-1: USB disconnect, address 7
>[drm] nouveau 0000:04:00.0: PFIFO_DMA_PUSHER - Ch 2
>[drm] nouveau 0000:04:00.0: PFIFO_CACHE_ERROR - Ch 2/0 Mthd 0x0000 Data 0x01000000
>[drm] nouveau 0000:04:00.0: PFIFO_DMA_PUSHER - Ch 2
>[drm] nouveau 0000:04:00.0: nouveau_channel_free: freeing fifo 2
>[drm] nouveau 0000:04:00.0: Failed to idle channel 2.
>[drm] nouveau 0000:04:00.0: PFIFO_DMA_PUSHER - Ch 127
>Console: switching to colour VGA+ 80x25
>unregistered panic notifier
>[drm] nouveau 0000:04:00.0: nouveau_channel_free: freeing fifo 1
>[TTM] Zone  kernel: Used memory at exit: 0 kiB.
>[drm] Module unloaded
>nouveau 0000:04:00.0: setting latency timer to 64
>[drm] nouveau 0000:04:00.0: Detected an NV50 generation card (0x092580a2)
>[drm] nouveau 0000:04:00.0: Attempting to load BIOS image from PRAMIN
>[drm] nouveau 0000:04:00.0: ... appears to be valid
>[drm] nouveau 0000:04:00.0: BIT BIOS found
>[drm] nouveau 0000:04:00.0: Bios version 62.92.34.00
>[drm] nouveau 0000:04:00.0: TMDS table revision 2.0 not currently supported
>[drm] nouveau 0000:04:00.0: Found Display Configuration Block version 4.0
>[drm] nouveau 0000:04:00.0: Raw DCB entry 0: 01000323 00010034
>[drm] nouveau 0000:04:00.0: Raw DCB entry 1: 02011312 00020030
>[drm] nouveau 0000:04:00.0: Raw DCB entry 2: 02033300 00000028
>[drm] nouveau 0000:04:00.0: Raw DCB entry 3: 010443f1 00c0c080
>[drm] nouveau 0000:04:00.0: Raw DCB entry 4: 0104c3f1 00c0c080
>[drm] nouveau 0000:04:00.0: DCB connector table: VHER 0x40 5 16 4
>[drm] nouveau 0000:04:00.0:   0: 0x00000040: type 0x40 idx 0 tag 0xff
>[drm] nouveau 0000:04:00.0:   1: 0x00001131: type 0x31 idx 1 tag 0x07
>[drm] nouveau 0000:04:00.0:   2: 0x00002231: type 0x31 idx 2 tag 0x08
>[drm] nouveau 0000:04:00.0:   3: 0x00000300: type 0x00 idx 3 tag 0xff
>[drm] nouveau 0000:04:00.0:   4: 0x00000410: type 0x10 idx 4 tag 0xff
>[drm] nouveau 0000:04:00.0:   5: 0x00000411: type 0x11 idx 5 tag 0xff
>[drm] nouveau 0000:04:00.0:   6: 0x00000413: type 0x13 idx 6 tag 0xff
>[drm] nouveau 0000:04:00.0:   7: 0x00010547: type 0x47 idx 7 tag 0x51
>[drm] nouveau 0000:04:00.0:   8: 0x00000631: type 0x31 idx 8 tag 0xff
>[drm] nouveau 0000:04:00.0:   9: 0x00001731: type 0x31 idx 9 tag 0x07
>[drm] nouveau 0000:04:00.0:   10: 0x00002831: type 0x31 idx 10 tag 0x08
>[drm] nouveau 0000:04:00.0:   11: 0x00000900: type 0x00 idx 11 tag 0xff
>[drm] nouveau 0000:04:00.0:   12: 0x00000a10: type 0x10 idx 12 tag 0xff
>[drm] nouveau 0000:04:00.0:   13: 0x00000a11: type 0x11 idx 13 tag 0xff
>[drm] nouveau 0000:04:00.0:   14: 0x00000a13: type 0x13 idx 14 tag 0xff
>[drm] nouveau 0000:04:00.0:   15: 0x00010b31: type 0x31 idx 15 tag 0x51
>[drm] nouveau 0000:04:00.0: Parsing VBIOS init table 0 at offset 0xCC9E
>[drm] nouveau 0000:04:00.0: Parsing VBIOS init table 1 at offset 0xD069
>[drm] nouveau 0000:04:00.0: Parsing VBIOS init table 2 at offset 0xDDE4
>[drm] nouveau 0000:04:00.0: Parsing VBIOS init table 3 at offset 0xDF06
>[drm] nouveau 0000:04:00.0: Parsing VBIOS init table 4 at offset 0xE136
>[drm] nouveau 0000:04:00.0: Parsing VBIOS init table at offset 0xE19B
>[drm] nouveau 0000:04:00.0: 0xB4E8: parsing output script 0
>[drm] nouveau 0000:04:00.0: 0xB7CE: parsing output script 0
>[drm] nouveau 0000:04:00.0: 0xA3CC: parsing output script 0
>[drm] nouveau 0000:04:00.0: 0xA3CC: parsing output script 0
>[drm] nouveau 0000:04:00.0: Detected 512MiB VRAM
>[TTM] Zone  kernel: Available graphics memory: 2027062 kiB.
>[drm] nouveau 0000:04:00.0: 512 MiB GART (aperture)
>[drm] nouveau 0000:04:00.0: Allocating FIFO number 1
>[drm] nouveau 0000:04:00.0: nouveau_channel_alloc: initialised FIFO 1
>[drm] nouveau 0000:04:00.0: Detected a LVDS output
>[drm] nouveau 0000:04:00.0: Detected a TMDS output
>[drm] nouveau 0000:04:00.0: Detected a DAC output
>[drm] nouveau 0000:04:00.0: DCB encoder 1 unknown
>[drm] nouveau 0000:04:00.0: DCB encoder 1 unknown
>[drm] nouveau 0000:04:00.0: Detected a LVDS connector
>composite sync not supported
>[drm] nouveau 0000:04:00.0: Detected a DVI-D connector
>[drm] nouveau 0000:04:00.0: Detected a DVI-D connector
>[drm] nouveau 0000:04:00.0:   no encoders, ignoring
>[drm] nouveau 0000:04:00.0: Detected a VGA connector
>[drm] nouveau 0000:04:00.0: Detected a TV connector
>[drm] nouveau 0000:04:00.0:   no encoders, ignoring
>[drm] nouveau 0000:04:00.0: Detected an eDP connector
>[drm] nouveau 0000:04:00.0:   no encoders, ignoring
>[drm] nouveau 0000:04:00.0: Detected a DVI-D connector
>[drm] nouveau 0000:04:00.0:   no encoders, ignoring
>[drm] nouveau 0000:04:00.0: Detected a DVI-D connector
>[drm] nouveau 0000:04:00.0:   no encoders, ignoring
>[drm] nouveau 0000:04:00.0: Detected a DVI-D connector
>[drm] nouveau 0000:04:00.0:   no encoders, ignoring
>[drm] nouveau 0000:04:00.0: Detected a VGA connector
>[drm] nouveau 0000:04:00.0:   no encoders, ignoring
>[drm] nouveau 0000:04:00.0: Detected a TV connector
>[drm] nouveau 0000:04:00.0:   no encoders, ignoring
>[drm] nouveau 0000:04:00.0: Detected a DVI-D connector
>[drm] nouveau 0000:04:00.0:   no encoders, ignoring
>composite sync not supported
>[drm] nouveau 0000:04:00.0: allocated 1920x1200 fb: 0x40250000, bo ffff880128990200
>Console: switching to colour frame buffer device 240x75
>fb0: nouveaufb frame buffer device
>registered panic notifier
>[drm] Initialized nouveau 0.0.16 20090420 for 0000:04:00.0 on minor 0
>composite sync not supported
>composite sync not supported
>[drm] nouveau 0000:04:00.0: Allocating FIFO number 2
>[drm] nouveau 0000:04:00.0: nouveau_channel_alloc: initialised FIFO 2
>[drm] nouveau 0000:04:00.0: 0xB4EC: parsing output script 1
>[drm] nouveau 0000:04:00.0: 0xB3D5: parsing clock script 0
>[drm] nouveau 0000:04:00.0: 0xB4E3: parsing clock script 1
>composite sync not supported
>composite sync not supported
>composite sync not supported
>usb 6-1: USB disconnect, address 3
>usb 6-1: new full speed USB device using uhci_hcd and address 4
>input: Altec Lansing Technologies, Inc. Altec Lansing XT2 - USB Audio as /devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1:1.3/input/input11
>generic-usb 0003:04D2:9802.0003: input,hidraw1: USB HID v1.00 Device [Altec Lansing Technologies, Inc. Altec Lansing XT2 - USB Audio] on usb-0000:00:1d.1-1/input3
>ata3: clearing spurious IRQ
>composite sync not supported
>usb 1-1: new high speed USB device using ehci_hcd and address 8
>usb 1-1: USB disconnect, address 8
>usb 1-1: new high speed USB device using ehci_hcd and address 9
>usb 1-1: USB disconnect, address 9
>usb 1-1: new high speed USB device using ehci_hcd and address 10
>lt-dimension[395]: segfault at 20 ip 00002acc9780246e sp 00007fff43eb6fb0 error 4 in libdimension.so.0.0.0[2acc977f2000+17000]
>usb 1-1: USB disconnect, address 10
>composite sync not supported
>composite sync not supported
>composite sync not supported
>usb 1-1: new high speed USB device using ehci_hcd and address 11
>usb 1-1: USB disconnect, address 11
>usb 1-1: new high speed USB device using ehci_hcd and address 12
>usb 1-1: USB disconnect, address 12
>usb 1-1: new high speed USB device using ehci_hcd and address 13
>ata3: clearing spurious IRQ
>ata3: clearing spurious IRQ
>usb 1-1: USB disconnect, address 13
>usb 1-1: new high speed USB device using ehci_hcd and address 14
>atkbd serio0: Unknown key pressed (translated set 2, code 0xe1 on isa0060/serio0).
>atkbd serio0: Use 'setkeycodes e061 <keycode>' to make it known.
>atkbd serio0: Unknown key released (translated set 2, code 0xe1 on isa0060/serio0).
>atkbd serio0: Use 'setkeycodes e061 <keycode>' to make it known.
>usb 1-1: USB disconnect, address 14

Actions: View

Attachments on bug 26733: 34822 | 35000 | 35323 | 35865 | 56934

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.