Attachment 36036 Details for Bug 25453 – output of dmesg after resume (linux 2.6.34)

output of dmesg after resume (linux 2.6.34)

dmesg.output (text/plain), 88.38 KB, created by Tobias Hommel on 2010-06-03 13:12:41 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Tobias Hommel

Created: 2010-06-03 13:12:41 UTC

Size: 88.38 KB

patch

obsolete

>Linux version 2.6.34-gentoo-nyx (root@nyx) (gcc version 4.4.3 (Gentoo 4.4.3-r2 p1.2) ) #5 SMP PREEMPT Thu Jun 3 20:39:52 CEST 2010
>Command line: root=/dev/sda3 hpet=force iommu=force nouveau.modeset=1
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000cffd0000 (usable)
> BIOS-e820: 00000000cffd0000 - 00000000cffde000 (ACPI data)
> BIOS-e820: 00000000cffde000 - 00000000d0000000 (ACPI NVS)
> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
> BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
> BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
>NX (Execute Disable) protection: active
>DMI present.
>AMI BIOS detected: BIOS may corrupt low RAM, working around it.
>e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
>e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
>e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
>No AGP bridge found
>last_pfn = 0x130000 max_arch_pfn = 0x400000000
>MTRR default type: uncachable
>MTRR fixed ranges enabled:
>  00000-9FFFF write-back
>  A0000-EFFFF uncachable
>  F0000-FFFFF write-protect
>MTRR variable ranges enabled:
>  0 base 0000000000 mask FF80000000 write-back
>  1 base 0080000000 mask FFC0000000 write-back
>  2 base 00C0000000 mask FFF0000000 write-back
>  3 base 0100000000 mask FFE0000000 write-back
>  4 base 0120000000 mask FFF0000000 write-back
>  5 base 00000DC000 mask 0FFFFFE000 write-back
>  6 disabled
>  7 disabled
>TOM2: 0000000130000000 aka 4864M
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>mtrr: your BIOS has configured an incorrect mask, fixing it.
>e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
>last_pfn = 0xcffd0 max_arch_pfn = 0x400000000
>initial memory mapped : 0 - 20000000
>init_memory_mapping: 0000000000000000-00000000cffd0000
> 0000000000 - 00cfe00000 page 2M
> 00cfe00000 - 00cffd0000 page 4k
>kernel direct mapping tables up to cffd0000 @ 16000-1c000
>init_memory_mapping: 0000000100000000-0000000130000000
> 0100000000 - 0130000000 page 2M
>kernel direct mapping tables up to 130000000 @ 1a000-20000
>ACPI: RSDP 00000000000f91a0 00014 (v00 ACPIAM)
>ACPI: RSDT 00000000cffd0000 00038 (v01 A M I  OEMRSDT  10000722 MSFT 00000097)
>ACPI: FACP 00000000cffd0200 00084 (v02 A M I  OEMFACP  10000722 MSFT 00000097)
>ACPI: DSDT 00000000cffd0440 04512 (v01  1ADJT 1ADJT007 00000007 INTL 20051117)
>ACPI: FACS 00000000cffde000 00040
>ACPI: APIC 00000000cffd0390 00070 (v01 A M I  OEMAPIC  10000722 MSFT 00000097)
>ACPI: MCFG 00000000cffd0400 0003C (v01 A M I  OEMMCFG  10000722 MSFT 00000097)
>ACPI: OEMB 00000000cffde040 00060 (v01 A M I  AMI_OEM  10000722 MSFT 00000097)
>ACPI: SSDT 00000000cffd4960 0030E (v01 A M I  POWERNOW 00000001 AMD  00000001)
>ACPI: Local APIC address 0xfee00000
> [ffffea0000000000-ffffea00043fffff] PMD -> [ffff880002000000-ffff8800059fffff] on node 0
>Zone PFN ranges:
>  DMA      0x00000010 -> 0x00001000
>  DMA32    0x00001000 -> 0x00100000
>  Normal   0x00100000 -> 0x00130000
>Movable zone start PFN for each node
>early_node_map[3] active PFN ranges
>    0: 0x00000010 -> 0x0000009f
>    0: 0x00000100 -> 0x000cffd0
>    0: 0x00100000 -> 0x00130000
>On node 0 totalpages: 1048415
>  DMA zone: 56 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 3927 pages, LIFO batch:0
>  DMA32 zone: 14280 pages used for memmap
>  DMA32 zone: 833544 pages, LIFO batch:31
>  Normal zone: 2688 pages used for memmap
>  Normal zone: 193920 pages, LIFO batch:31
>Nvidia board detected. Ignoring ACPI timer override.
>If you got timer trouble try acpi_use_timer_override
>Detected use of extended apic ids on hypertransport bus
>ACPI: PM-Timer IO Port: 0x4008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 0 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
>ACPI: IRQ0 used by override.
>ACPI: IRQ9 used by override.
>ACPI: IRQ14 used by override.
>ACPI: IRQ15 used by override.
>Using ACPI (MADT) for SMP configuration information
>SMP: Allowing 2 CPUs, 0 hotplug CPUs
>nr_irqs_gsi: 24
>early_res array is doubled to 64 at [1b000 - 1b7ff]
>Allocating PCI resources starting at d0000000 (gap: d0000000:2ec00000)
>setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
>PERCPU: Embedded 26 pages/cpu @ffff880001800000 s75176 r8192 d23128 u1048576
>pcpu-alloc: s75176 r8192 d23128 u1048576 alloc=1*2097152
>pcpu-alloc: [0] 0 1 
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1031391
>Kernel command line: root=/dev/sda3 hpet=force iommu=force nouveau.modeset=1
>PID hash table entries: 4096 (order: 3, 32768 bytes)
>Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
>Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Checking aperture...
>No AGP bridge found
>Node 0: aperture @ 20000000 size 32 MB
>Aperture pointing to e820 RAM. Ignoring.
>Your BIOS doesn't leave a aperture memory hole
>Please enable the IOMMU option in the BIOS setup
>This costs you 64 MB of RAM
>Mapping aperture over 65536 KB of RAM @ 20000000
>Subtract (48 early reservations)
>  #1 [0001000000 - 000161c4c4]   TEXT DATA BSS
>  #2 [000009fc00 - 0000100000]   BIOS reserved
>  #3 [000161d000 - 000161d180]             BRK
>  #4 [0000010000 - 0000012000]      TRAMPOLINE
>  #5 [0000012000 - 0000016000]     ACPI WAKEUP
>  #6 [0000016000 - 000001a000]         PGTABLE
>  #7 [000001a000 - 000001b000]         PGTABLE
>  #8 [000161d180 - 000161e180]         BOOTMEM
>  #9 [000161c500 - 000161c700]         BOOTMEM
>  #10 [0001e1f000 - 0001e20000]         BOOTMEM
>  #11 [0001e20000 - 0001e21000]         BOOTMEM
>  #12 [0002000000 - 0005a00000]        MEMMAP 0
>  #13 [000161c700 - 000161c880]         BOOTMEM
>  #14 [000161e180 - 0001636180]         BOOTMEM
>  #15 [0001636180 - 000163c180]         BOOTMEM
>  #16 [000163d000 - 000163e000]         BOOTMEM
>  #17 [000161c880 - 000161c8c3]         BOOTMEM
>  #18 [000161c900 - 000161cb68]         BOOTMEM
>  #19 [000161cb80 - 000161cbe8]         BOOTMEM
>  #20 [000161cc00 - 000161cc68]         BOOTMEM
>  #21 [000161cc80 - 000161cce8]         BOOTMEM
>  #22 [000161cd00 - 000161cd68]         BOOTMEM
>  #23 [000161cd80 - 000161cde8]         BOOTMEM
>  #24 [000161ce00 - 000161ce68]         BOOTMEM
>  #25 [000161ce80 - 000161cee8]         BOOTMEM
>  #26 [000161cf00 - 000161cf68]         BOOTMEM
>  #27 [000161cf80 - 000161cfe8]         BOOTMEM
>  #28 [000163c180 - 000163c1e8]         BOOTMEM
>  #29 [000163c200 - 000163c238]         BOOTMEM
>  #30 [000163c240 - 000163c278]         BOOTMEM
>  #31 [0001800000 - 000181a000]         BOOTMEM
>  #32 [0001900000 - 000191a000]         BOOTMEM
>  #33 [000163c280 - 000163c288]         BOOTMEM
>  #34 [000163c2c0 - 000163c2c8]         BOOTMEM
>  #35 [000163c300 - 000163c308]         BOOTMEM
>  #36 [000163c340 - 000163c350]         BOOTMEM
>  #37 [000163c380 - 000163c4c0]         BOOTMEM
>  #38 [000163c4c0 - 000163c520]         BOOTMEM
>  #39 [000163c540 - 000163c5a0]         BOOTMEM
>  #40 [000163e000 - 0001646000]         BOOTMEM
>  #41 [000191a000 - 0001d1a000]         BOOTMEM
>  #42 [0005a00000 - 0005c00000]         BOOTMEM
>  #43 [0020000000 - 0024000000]         BOOTMEM
>  #44 [0005c00000 - 0009c00000]         BOOTMEM
>  #45 [0001646000 - 0001666000]         BOOTMEM
>  #46 [0001666000 - 00016a6000]         BOOTMEM
>  #47 [000001b800 - 0000023800]         BOOTMEM
>Memory: 3989948k/4980736k available (3631k kernel code, 787076k absent, 203712k reserved, 1701k data, 420k init)
>Hierarchical RCU implementation.
>NR_IRQS:320
>spurious 8259A interrupt: IRQ7.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Fast TSC calibration using PIT
>Detected 3015.921 MHz processor.
>Calibrating delay loop (skipped), value calculated using timer frequency.. 6031.84 BogoMIPS (lpj=3015921)
>Security Framework initialized
>Mount-cache hash table entries: 256
>tseg: 0000000000
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>mce: CPU supports 5 MCE banks
>using C1E aware idle routine
>Performance Events: AMD PMU driver.
>... version:                0
>... bit width:              48
>... generic registers:      4
>... value mask:             0000ffffffffffff
>... max period:             00007fffffffffff
>... fixed-purpose events:   0
>... event mask:             000000000000000f
>ACPI: Core revision 20100121
>Setting APIC routing to flat
>..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
>CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ stepping 03
>Booting Node   0, Processors  #1 Ok.
>Brought up 2 CPUs
>Total of 2 processors activated (12061.68 BogoMIPS).
>NET: Registered protocol family 16
>node 0 link 0: io port [1000, ffffff]
>TOM: 00000000d0000000 aka 3328M
>node 0 link 0: mmio [e0000000, efffffff]
>node 0 link 0: mmio [f9ff0000, f9ffffff]
>node 0 link 0: mmio [a0000, bffff]
>node 0 link 0: mmio [d0000000, fe0bffff]
>TOM2: 0000000130000000 aka 4864M
>bus: [00, ff] on node 0 link 0
>bus: 00 index 0 [io  0x0000-0xffff]
>bus: 00 index 1 [mem 0xd0000000-0xffffffff]
>bus: 00 index 2 [mem 0xf9ff0000-0xf9ffffff]
>bus: 00 index 3 [mem 0x000a0000-0x000bffff]
>bus: 00 index 4 [mem 0x130000000-0xfcffffffff]
>ACPI: bus type pci registered
>PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
>PCI: not using MMCONFIG
>PCI: Using configuration type 1 for base access
>bio: create slab <bio-0> at 0
>ACPI: EC: Look up EC in DSDT
>ACPI: Executed 1 blocks of module-level executable AML code
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S5)
>ACPI: Using IOAPIC for interrupt routing
>PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
>PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
>ACPI Warning: Incorrect checksum in table [OEMB] - E9, should be E8 (20100121/tbutils-314)
>ACPI: No dock devices found.
>PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
>pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)
>pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
>pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored)
>pci_root PNP0A03:00: host bridge window [mem 0xd0000000-0xff77ffff] (ignored)
>pci 0000:00:01.0: Force enabled HPET at 0xfed00000
>pci 0000:00:01.1: reg 10: [io  0xcc00-0xcc1f]
>pci 0000:00:01.1: reg 20: [io  0x5000-0x503f]
>pci 0000:00:01.1: reg 24: [io  0x6000-0x603f]
>pci 0000:00:01.1: PME# supported from D3hot D3cold
>pci 0000:00:01.1: PME# disabled
>pci 0000:00:02.0: reg 10: [mem 0xf9fff000-0xf9ffffff]
>pci 0000:00:02.0: supports D1 D2
>pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:02.0: PME# disabled
>pci 0000:00:02.1: reg 10: [mem 0xf9ffec00-0xf9ffecff]
>pci 0000:00:02.1: supports D1 D2
>pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:02.1: PME# disabled
>pci 0000:00:06.0: reg 20: [io  0xffa0-0xffaf]
>pci 0000:00:07.0: reg 10: [io  0xc480-0xc487]
>pci 0000:00:07.0: reg 14: [io  0xc400-0xc403]
>pci 0000:00:07.0: reg 18: [io  0xc080-0xc087]
>pci 0000:00:07.0: reg 1c: [io  0xc000-0xc003]
>pci 0000:00:07.0: reg 20: [io  0xbc00-0xbc0f]
>pci 0000:00:07.0: reg 24: [mem 0xf9ffd000-0xf9ffdfff]
>pci 0000:00:0a.0: reg 10: [mem 0xf9ffc000-0xf9ffcfff]
>pci 0000:00:0a.0: reg 14: [io  0xb880-0xb887]
>pci 0000:00:0a.0: supports D1 D2
>pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:0a.0: PME# disabled
>pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:0b.0: PME# disabled
>pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:0c.0: PME# disabled
>pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:0d.0: PME# disabled
>pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:0e.0: PME# disabled
>PCI: peer root bus 00 res updated from pci conf
>pci 0000:01:09.0: reg 10: [io  0xdc00-0xdc1f]
>pci 0000:01:09.0: supports D1 D2
>pci 0000:01:09.1: reg 10: [io  0xd880-0xd887]
>pci 0000:01:09.1: supports D1 D2
>pci 0000:00:09.0: PCI bridge to [bus 01-01] (subtractive decode)
>pci 0000:00:09.0:   bridge window [io  0xd000-0xdfff]
>pci 0000:00:09.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
>pci 0000:00:09.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
>pci 0000:00:09.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
>pci 0000:00:09.0:   bridge window [mem 0xd0000000-0xffffffff] (subtractive decode)
>pci 0000:00:09.0:   bridge window [mem 0xf9ff0000-0xf9ffffff] (subtractive decode)
>pci 0000:00:09.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
>pci 0000:00:09.0:   bridge window [mem 0x130000000-0xfcffffffff] (subtractive decode)
>pci 0000:00:0b.0: PCI bridge to [bus 02-02]
>pci 0000:00:0b.0:   bridge window [io  0xf000-0x0000] (disabled)
>pci 0000:00:0b.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
>pci 0000:00:0b.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
>pci 0000:00:0c.0: PCI bridge to [bus 03-03]
>pci 0000:00:0c.0:   bridge window [io  0xf000-0x0000] (disabled)
>pci 0000:00:0c.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
>pci 0000:00:0c.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
>pci 0000:00:0d.0: PCI bridge to [bus 04-04]
>pci 0000:00:0d.0:   bridge window [io  0xf000-0x0000] (disabled)
>pci 0000:00:0d.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
>pci 0000:00:0d.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
>pci 0000:05:00.0: reg 10: [mem 0xfd000000-0xfdffffff]
>pci 0000:05:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
>pci 0000:05:00.0: reg 1c: [mem 0xfa000000-0xfbffffff 64bit]
>pci 0000:05:00.0: reg 24: [io  0xec00-0xec7f]
>pci 0000:05:00.0: reg 30: [mem 0xfeb80000-0xfebfffff pref]
>pci 0000:00:0e.0: PCI bridge to [bus 05-05]
>pci 0000:00:0e.0:   bridge window [io  0xe000-0xefff]
>pci 0000:00:0e.0:   bridge window [mem 0xfa000000-0xfebfffff]
>pci 0000:00:0e.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
>pci_bus 0000:00: on NUMA node 0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR13._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
>ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
>ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *10
>ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *6
>ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *5
>ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *15
>ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *7
>ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
>ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *3
>ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
>vgaarb: device added: PCI:0000:05:00.0,decodes=io+mem,owns=io+mem,locks=none
>vgaarb: loaded
>SCSI subsystem initialized
>libata version 3.00 loaded.
>Advanced Linux Sound Architecture Driver Version 1.0.22.1.
>PCI: Using ACPI for IRQ routing
>PCI: pci_cache_line_size set to 64 bytes
>pci 0000:00:02.0: address space collision: [mem 0xf9fff000-0xf9ffffff] conflicts with PCI Bus #00 [mem 0xf9ff0000-0xf9ffffff]
>pci 0000:00:02.1: address space collision: [mem 0xf9ffec00-0xf9ffecff] conflicts with PCI Bus #00 [mem 0xf9ff0000-0xf9ffffff]
>pci 0000:00:07.0: address space collision: [mem 0xf9ffd000-0xf9ffdfff] conflicts with PCI Bus #00 [mem 0xf9ff0000-0xf9ffffff]
>pci 0000:00:0a.0: address space collision: [mem 0xf9ffc000-0xf9ffcfff] conflicts with PCI Bus #00 [mem 0xf9ff0000-0xf9ffffff]
>reserve RAM buffer: 000000000009fc00 - 000000000009ffff 
>reserve RAM buffer: 00000000cffd0000 - 00000000cfffffff 
>hpet clockevent registered
>HPET: 3 timers in total, 0 timers will be used for per-cpu timer
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
>hpet0: 3 comparators, 32-bit 25.000000 MHz counter
>Switching to clocksource hpet
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 13 devices
>ACPI: ACPI bus type pnp unregistered
>system 00:06: [io  0x04d0-0x04d1] has been reserved
>system 00:06: [io  0x0800-0x080f] has been reserved
>system 00:06: [io  0x4000-0x407f] has been reserved
>system 00:06: [io  0x4080-0x40ff] has been reserved
>system 00:06: [io  0x4400-0x447f] has been reserved
>system 00:06: [io  0x4480-0x44ff] has been reserved
>system 00:06: [io  0x4800-0x487f] has been reserved
>system 00:06: [io  0x4880-0x48ff] has been reserved
>system 00:06: [mem 0xfee01000-0xfeefffff] has been reserved
>system 00:06: [mem 0xfefff000-0xfeffffff] has been reserved
>system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved
>system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved
>system 00:0a: [io  0x0a00-0x0a0f] has been reserved
>system 00:0a: [io  0x0a10-0x0a1f] has been reserved
>system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
>system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
>system 00:0c: [mem 0x000c0000-0x000cffff] has been reserved
>system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
>system 00:0c: [mem 0x00100000-0xcfffffff] could not be reserved
>system 00:0c: [mem 0xff780000-0xffffffff] has been reserved
>pci 0000:00:02.0: BAR 0: assigned [mem 0xf0000000-0xf0000fff]
>pci 0000:00:02.0: BAR 0: set to [mem 0xf0000000-0xf0000fff] (PCI address [0xf0000000-0xf0000fff]
>pci 0000:00:07.0: BAR 5: assigned [mem 0xf0001000-0xf0001fff]
>pci 0000:00:07.0: BAR 5: set to [mem 0xf0001000-0xf0001fff] (PCI address [0xf0001000-0xf0001fff]
>pci 0000:00:0a.0: BAR 0: assigned [mem 0xf0002000-0xf0002fff]
>pci 0000:00:0a.0: BAR 0: set to [mem 0xf0002000-0xf0002fff] (PCI address [0xf0002000-0xf0002fff]
>pci 0000:00:02.1: BAR 0: assigned [mem 0xf0003000-0xf00030ff]
>pci 0000:00:02.1: BAR 0: set to [mem 0xf0003000-0xf00030ff] (PCI address [0xf0003000-0xf00030ff]
>pci 0000:00:09.0: PCI bridge to [bus 01-01]
>pci 0000:00:09.0:   bridge window [io  0xd000-0xdfff]
>pci 0000:00:09.0:   bridge window [mem disabled]
>pci 0000:00:09.0:   bridge window [mem pref disabled]
>pci 0000:00:0b.0: PCI bridge to [bus 02-02]
>pci 0000:00:0b.0:   bridge window [io  disabled]
>pci 0000:00:0b.0:   bridge window [mem disabled]
>pci 0000:00:0b.0:   bridge window [mem pref disabled]
>pci 0000:00:0c.0: PCI bridge to [bus 03-03]
>pci 0000:00:0c.0:   bridge window [io  disabled]
>pci 0000:00:0c.0:   bridge window [mem disabled]
>pci 0000:00:0c.0:   bridge window [mem pref disabled]
>pci 0000:00:0d.0: PCI bridge to [bus 04-04]
>pci 0000:00:0d.0:   bridge window [io  disabled]
>pci 0000:00:0d.0:   bridge window [mem disabled]
>pci 0000:00:0d.0:   bridge window [mem pref disabled]
>pci 0000:00:0e.0: PCI bridge to [bus 05-05]
>pci 0000:00:0e.0:   bridge window [io  0xe000-0xefff]
>pci 0000:00:0e.0:   bridge window [mem 0xfa000000-0xfebfffff]
>pci 0000:00:0e.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
>pci 0000:00:09.0: setting latency timer to 64
>pci 0000:00:0b.0: setting latency timer to 64
>pci 0000:00:0c.0: setting latency timer to 64
>pci 0000:00:0d.0: setting latency timer to 64
>pci 0000:00:0e.0: setting latency timer to 64
>pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
>pci_bus 0000:00: resource 5 [mem 0xd0000000-0xffffffff]
>pci_bus 0000:00: resource 6 [mem 0xf9ff0000-0xf9ffffff]
>pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff]
>pci_bus 0000:00: resource 8 [mem 0x130000000-0xfcffffffff]
>pci_bus 0000:01: resource 0 [io  0xd000-0xdfff]
>pci_bus 0000:01: resource 4 [io  0x0000-0xffff]
>pci_bus 0000:01: resource 5 [mem 0xd0000000-0xffffffff]
>pci_bus 0000:01: resource 6 [mem 0xf9ff0000-0xf9ffffff]
>pci_bus 0000:01: resource 7 [mem 0x000a0000-0x000bffff]
>pci_bus 0000:01: resource 8 [mem 0x130000000-0xfcffffffff]
>pci_bus 0000:05: resource 0 [io  0xe000-0xefff]
>pci_bus 0000:05: resource 1 [mem 0xfa000000-0xfebfffff]
>pci_bus 0000:05: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
>NET: Registered protocol family 2
>IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 262144 bind 65536)
>TCP reno registered
>UDP hash table entries: 2048 (order: 4, 65536 bytes)
>UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
>NET: Registered protocol family 1
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>RPC: Registered tcp NFSv4.1 backchannel transport module.
>pci 0000:00:02.0: OHCI: BIOS handoff failed (BIOS bug?) 000007b4
>pci 0000:00:00.0: Found enabled HT MSI Mapping
>pci 0000:00:0b.0: Found disabled HT MSI Mapping
>pci 0000:00:00.0: Found enabled HT MSI Mapping
>pci 0000:00:0b.0: Linking AER extended capability
>pci 0000:00:00.0: Found enabled HT MSI Mapping
>pci 0000:00:0c.0: Found disabled HT MSI Mapping
>pci 0000:00:00.0: Found enabled HT MSI Mapping
>pci 0000:00:0c.0: Linking AER extended capability
>pci 0000:00:00.0: Found enabled HT MSI Mapping
>pci 0000:00:0d.0: Found disabled HT MSI Mapping
>pci 0000:00:00.0: Found enabled HT MSI Mapping
>pci 0000:00:0d.0: Linking AER extended capability
>pci 0000:00:00.0: Found enabled HT MSI Mapping
>pci 0000:00:0e.0: Found disabled HT MSI Mapping
>pci 0000:00:00.0: Found enabled HT MSI Mapping
>pci 0000:00:0e.0: Linking AER extended capability
>pci 0000:05:00.0: Boot video device
>PCI: CLS 64 bytes, default 64
>PCI-DMA: Disabling AGP.
>PCI-DMA: aperture base @ 20000000 size 65536 KB
>PCI-DMA: using GART IOMMU.
>PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
>audit: initializing netlink socket (disabled)
>type=2000 audit(1275594338.737:1): initialized
>msgmni has been set to 7921
>alg: No test for stdrng (krng)
>io scheduler noop registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pcieport 0000:00:0b.0: setting latency timer to 64
>pcieport 0000:00:0b.0: irq 24 for MSI/MSI-X
>pcieport 0000:00:0c.0: setting latency timer to 64
>pcieport 0000:00:0c.0: irq 25 for MSI/MSI-X
>pcieport 0000:00:0d.0: setting latency timer to 64
>pcieport 0000:00:0d.0: irq 26 for MSI/MSI-X
>pcieport 0000:00:0e.0: setting latency timer to 64
>pcieport 0000:00:0e.0: irq 27 for MSI/MSI-X
>Real Time Clock Driver v1.12b
>Non-volatile memory driver v1.3
>Linux agpgart interface v0.103
>Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds).
>Hangcheck: Using get_cycles().
>[drm] Initialized drm 1.1.0 20060810
>Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>sata_nv 0000:00:07.0: version 3.5
>ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
>sata_nv 0000:00:07.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23
>sata_nv 0000:00:07.0: setting latency timer to 64
>scsi0 : sata_nv
>scsi1 : sata_nv
>ata1: SATA max UDMA/133 cmd 0xc480 ctl 0xc400 bmdma 0xbc00 irq 23
>ata2: SATA max UDMA/133 cmd 0xc080 ctl 0xc000 bmdma 0xbc08 irq 23
>pata_amd 0000:00:06.0: version 0.4.1
>pata_amd 0000:00:06.0: setting latency timer to 64
>scsi2 : pata_amd
>scsi3 : pata_amd
>ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
>ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>i2c /dev entries driver
>device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
>cpuidle: using governor ladder
>cpuidle: using governor menu
>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 19
>EMU10K1_Audigy 0000:01:09.0: PCI INT A -> Link[LNKD] -> GSI 19 (level, low) -> IRQ 19
>ALSA device list:
>  #0: SB Live! 5.1 Dell OEM [SB0228] (rev.10, serial:0x80661102) at 0xdc00, irq 19
>TCP cubic registered
>NET: Registered protocol family 17
>registered taskstats version 1
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
>ata3.00: ATA-7: ST3250824A, 3.AAE, max UDMA/100
>ata3.00: 488397168 sectors, multi 16: LBA48 
>ata3.01: ATAPI: HL-DT-ST DVDRAM GSA-4163B, A105, max UDMA/33
>ata3: nv_mode_filter: 0x3f39f&0x3f39f->0x3f39f, BIOS=0x3f000 (0xc6c00000) ACPI=0x3f01f (20:60:0x15)
>ata3: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc6c00000) ACPI=0x701f (20:60:0x15)
>ata3.00: configured for UDMA/100
>ata3.01: configured for UDMA/33
>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata1.00: ATA-7: SAMSUNG SP2504C, VT100-52, max UDMA7
>ata1.00: 488281250 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata1.00: configured for UDMA/133
>scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG SP2504C  VT10 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 488281250 512-byte logical blocks: (250 GB/232 GiB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>ata2: SATA link down (SStatus 0 SControl 300)
>scsi 2:0:0:0: Direct-Access     ATA      ST3250824A       3.AA PQ: 0 ANSI: 5
>sd 2:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB)
>sd 2:0:0:0: [sdb] Write Protect is off
>sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>scsi 2:0:1:0: CD-ROM            HL-DT-ST DVDRAM GSA-4163B A105 PQ: 0 ANSI: 5
> sdb: sdb1 sdb2 < sdb5 sdb6 >
>sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
>sd 2:0:0:0: [sdb] Attached SCSI disk
>Uniform CD-ROM driver Revision: 3.20
>sr 2:0:1:0: Attached scsi CD-ROM sr0
>ata4: port disabled. ignoring.
>EXT3-fs (sda3): mounted filesystem with writeback data mode
>VFS: Mounted root (ext3 filesystem) readonly on device 8:3.
>Freeing unused kernel memory: 420k freed
>kjournald starting.  Commit interval 5 seconds
>udev: starting version 154
>i2c i2c-0: nForce2 SMBus adapter at 0x5000
>i2c i2c-1: nForce2 SMBus adapter at 0x6000
>k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
>forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
>ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 22
>forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 22 (level, low) -> IRQ 22
>forcedeth 0000:00:0a.0: setting latency timer to 64
>nv_probe: set workaround bit for reversed mac addr
>gameport gameport0: EMU10K1 is pci0000:01:09.1/gameport0, io 0xd880, speed 1202kHz
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 18
>nouveau 0000:05:00.0: PCI INT A -> Link[LNKC] -> GSI 18 (level, low) -> IRQ 18
>nouveau 0000:05:00.0: setting latency timer to 64
>[drm] nouveau 0000:05:00.0: Detected an NV50 generation card (0x096080c1)
>[drm] nouveau 0000:05:00.0: Attempting to load BIOS image from PRAMIN
>[drm] nouveau 0000:05:00.0: ... appears to be valid
>[drm] nouveau 0000:05:00.0: BIT BIOS found
>[drm] nouveau 0000:05:00.0: Bios version 62.94.28.00
>[drm] nouveau 0000:05:00.0: TMDS table revision 2.0 not currently supported
>[drm] nouveau 0000:05:00.0: Found Display Configuration Block version 4.0
>[drm] nouveau 0000:05:00.0: Raw DCB entry 0: 02000300 00000028
>[drm] nouveau 0000:05:00.0: Raw DCB entry 1: 01000302 00020030
>[drm] nouveau 0000:05:00.0: Raw DCB entry 2: 04011310 00000028
>[drm] nouveau 0000:05:00.0: Raw DCB entry 3: 02011312 00020030
>[drm] nouveau 0000:05:00.0: Raw DCB entry 4: 010223f1 00c0c080
>[drm] nouveau 0000:05:00.0: DCB connector table: VHER 0x40 5 16 4
>[drm] nouveau 0000:05:00.0:   0: 0x00001030: type 0x30 idx 0 tag 0x07
>[drm] nouveau 0000:05:00.0:   1: 0x00002130: type 0x30 idx 1 tag 0x08
>[drm] nouveau 0000:05:00.0:   2: 0x00000210: type 0x10 idx 2 tag 0xff
>[drm] nouveau 0000:05:00.0:   3: 0x00000211: type 0x11 idx 3 tag 0xff
>[drm] nouveau 0000:05:00.0:   4: 0x00000213: type 0x13 idx 4 tag 0xff
>[drm] nouveau 0000:05:00.0: Parsing VBIOS init table 0 at offset 0xD0BE
>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>[drm] nouveau 0000:05:00.0: Parsing VBIOS init table 1 at offset 0xD4D3
>[drm] nouveau 0000:05:00.0: Parsing VBIOS init table 2 at offset 0xE4C4
>[drm] nouveau 0000:05:00.0: Parsing VBIOS init table 3 at offset 0xE60D
>[drm] nouveau 0000:05:00.0: Parsing VBIOS init table 4 at offset 0xE849
>[drm] nouveau 0000:05:00.0: Parsing VBIOS init table at offset 0xE8AE
>[drm] nouveau 0000:05:00.0: 0xE8AE: Condition still not met after 20ms, skipping following opcodes
>[drm] nouveau 0000:05:00.0: 0xC090: parsing output script 0
>[drm] nouveau 0000:05:00.0: 0xC090: parsing output script 0
>[drm] nouveau 0000:05:00.0: 0xAB1C: parsing output script 0
>[drm] nouveau 0000:05:00.0: Detected 512MiB VRAM
>[TTM] Zone  kernel: Available graphics memory: 2028158 kiB.
>[drm] nouveau 0000:05:00.0: 512 MiB GART (aperture)
>mtrr: your BIOS has configured an incorrect mask, fixing it.
>mtrr: your BIOS has configured an incorrect mask, fixing it.
>[drm] nouveau 0000:05:00.0: Allocating FIFO number 1
>[drm] nouveau 0000:05:00.0: nouveau_channel_alloc: initialised FIFO 1
>[drm] nouveau 0000:05:00.0: Detected a DAC output
>[drm] nouveau 0000:05:00.0: Detected a TMDS output
>[drm] nouveau 0000:05:00.0: Detected a DAC output
>[drm] nouveau 0000:05:00.0: Detected a TMDS output
>[drm] nouveau 0000:05:00.0: DCB encoder 1 unknown
>[drm] nouveau 0000:05:00.0: Detected a DVI-I connector
>[drm] nouveau 0000:05:00.0: Detected a DVI-I connector
>[drm] nouveau 0000:05:00.0: Detected a TV connector
>[drm] nouveau 0000:05:00.0:   no encoders, ignoring
>[drm] nouveau 0000:05:00.0: allocated 1680x1050 fb: 0x40250000, bo ffff88012ef82400
>fb0: nouveaufb frame buffer device
>registered panic notifier
>[drm] Initialized nouveau 0.0.16 20090420 for 0000:05:00.0 on minor 0
>forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x1c1 @ 1, addr 00:16:17:70:8b:50
>forcedeth 0000:00:0a.0: highdma csum gbit lnktim desc-v3
>ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 21
>ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 21 (level, low) -> IRQ 21
>ehci_hcd 0000:00:02.1: setting latency timer to 64
>ehci_hcd 0000:00:02.1: EHCI Host Controller
>ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:02.1: debug port 1
>ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
>ehci_hcd 0000:00:02.1: irq 21, io mem 0xf0003000
>ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 20
>ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 20 (level, low) -> IRQ 20
>ohci_hcd 0000:00:02.0: setting latency timer to 64
>ohci_hcd 0000:00:02.0: OHCI Host Controller
>ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:02.0: irq 20, io mem 0xf0000000
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 8 ports detected
>usb 2-1: new low speed USB device using ohci_hcd and address 2
>usbcore: registered new interface driver hiddev
>input: Logitech USB Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-1/2-1:1.0/input/input1
>generic-usb 0003:046D:C00C.0001: input: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:02.0-1/input0
>usbcore: registered new interface driver usbhid
>usbhid: USB HID core driver
>powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ processors (2 cpu cores) (version 2.20.00)
>powernow-k8:    0 : fid 0x16 (3000 MHz), vid 0x8
>powernow-k8:    1 : fid 0x14 (2800 MHz), vid 0xa
>powernow-k8:    2 : fid 0x12 (2600 MHz), vid 0xc
>powernow-k8:    3 : fid 0x10 (2400 MHz), vid 0xe
>powernow-k8:    4 : fid 0xe (2200 MHz), vid 0x10
>powernow-k8:    5 : fid 0xc (2000 MHz), vid 0x10
>powernow-k8:    6 : fid 0xa (1800 MHz), vid 0x10
>powernow-k8:    7 : fid 0x2 (1000 MHz), vid 0x12
>vboxdrv: Trying to deactivate the NMI watchdog permanently...
>vboxdrv: Warning: 2.6.31+ kernel detected. Most likely the hardware performance
>vboxdrv: counter framework which can generate NMIs is active. You have to prevent
>vboxdrv: the usage of hardware performance counters by
>vboxdrv:   echo 2 > /proc/sys/kernel/perf_counter_paranoid
>vboxdrv: Found 2 processor cores.
>VBoxDrv: dbg - g_abExecMemory=ffffffffa01343e0
>vboxdrv: fAsync=1 offMin=0x1b758 offMax=0x1b758
>vboxdrv: TSC mode is 'asynchronous', kernel timer mode is 'normal'.
>vboxdrv: Successfully loaded version 3.2.0 (interface 0x00140001).
>EXT3-fs (sda3): using internal journal
>EXT2-fs (sda1): warning: mounting ext3 filesystem as ext2
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs (sda6): using internal journal
>EXT3-fs (sda6): mounted filesystem with writeback data mode
>REISERFS (device sda5): found reiserfs format "3.6" with standard journal
>REISERFS (device sda5): using ordered data mode
>REISERFS (device sda5): journal params: device sda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>REISERFS (device sda5): checking transaction log (sda5)
>REISERFS (device sda5): Using r5 hash to sort names
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs (sda7): warning: checktime reached, running e2fsck is recommended
>EXT3-fs (sda7): using internal journal
>EXT3-fs (sda7): mounted filesystem with writeback data mode
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs (sdb6): warning: checktime reached, running e2fsck is recommended
>EXT3-fs (sdb6): using internal journal
>EXT3-fs (sdb6): mounted filesystem with writeback data mode
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs (sda9): warning: checktime reached, running e2fsck is recommended
>EXT3-fs (sda9): using internal journal
>EXT3-fs (sda9): mounted filesystem with writeback data mode
>fuse init (API version 7.13)
>Adding 1959924k swap on /dev/sda2.  Priority:-1 extents:1 across:1959924k 
>NET: Registered protocol family 10
>w83627ehf: Found W83627EHG chip at 0xa10
>Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
>NFSD: starting 90-second grace period
>CPUFREQ: Per core ondemand sysfs interface is deprecated - up_threshold
>ACPI: 'PS2M' and 'PS2K' have the same GPE, can't disable/enable one separately
>Clocksource tsc unstable (delta = -274986079 ns)
>ip_tables: (C) 2000-2006 Netfilter Core Team
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
>nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
>sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
>[drm] nouveau 0000:05:00.0: 0xC0AE: parsing output script 1
>[drm] nouveau 0000:05:00.0: 0xC0AF: parsing output script 2
>[drm] nouveau 0000:05:00.0: 0xBDA1: parsing clock script 0
>[drm] nouveau 0000:05:00.0: 0xB6D6: parsing clock script 1
>Console: switching to colour frame buffer device 210x65
>[drm] nouveau 0000:05:00.0: Allocating FIFO number 2
>[drm] nouveau 0000:05:00.0: nouveau_channel_alloc: initialised FIFO 2
>[drm] nouveau 0000:05:00.0: Allocating FIFO number 3
>[drm] nouveau 0000:05:00.0: nouveau_channel_alloc: initialised FIFO 3
>CPU 1 is now offline
>SMP alternatives: switching to UP code
>usbcore: deregistering interface driver usbhid
>usbcore: deregistering interface driver hiddev
>PM: Syncing filesystems ... done.
>Freezing user space processes ... (elapsed 0.01 seconds) done.
>Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>Suspending console(s) (use no_console_suspend to debug)
>sd 2:0:0:0: [sdb] Synchronizing SCSI cache
>sd 0:0:0:0: [sda] Synchronizing SCSI cache
>sd 2:0:0:0: [sdb] Stopping disk
>ACPI handle has no context!
>serial 00:05: disabled
>[drm] nouveau 0000:05:00.0: Disabling fbcon acceleration...
>[drm] nouveau 0000:05:00.0: Unpinning framebuffer(s)...
>[drm] nouveau 0000:05:00.0: Evicting buffers...
>forcedeth 0000:00:0a.0: PME# enabled
>forcedeth 0000:00:0a.0: wake-up capability enabled by ACPI
>forcedeth 0000:00:0a.0: PCI INT A disabled
>ehci_hcd 0000:00:02.1: PCI INT B disabled
>ohci_hcd 0000:00:02.0: PCI INT A disabled
>ata4: port disabled. ignoring.
>EMU10K1_Audigy 0000:01:09.0: PCI INT A disabled
>ACPI handle has no context!
>sd 0:0:0:0: [sda] Stopping disk
>[drm] nouveau 0000:05:00.0: Idling channels...
>[drm] nouveau 0000:05:00.0: Suspending GPU objects...
>sata_nv 0000:00:07.0: PCI INT A disabled
>[drm] nouveau 0000:05:00.0: And we're gone!
>nouveau 0000:05:00.0: PCI INT A disabled
>PM: suspend of devices complete after 662.592 msecs
>PM: late suspend of devices complete after 22.004 msecs
>ACPI: Preparing to enter system sleep state S3
>Disabling non-boot CPUs ...
>Back to C!
>PCI-DMA: Resuming GART IOMMU
>PCI-DMA: Restoring GART aperture settings
>Force enabled HPET at resume
>ACPI: Waking up from system sleep state S3
>nForce2_smbus 0000:00:01.1: restoring config space at offset 0xb (was 0xcb8410de, writing 0x73101462)
>ohci_hcd 0000:00:02.0: restoring config space at offset 0x4 (was 0xf9fff000, writing 0xf0000000)
>ohci_hcd 0000:00:02.0: restoring config space at offset 0x1 (was 0xb00007, writing 0xb00003)
>ehci_hcd 0000:00:02.1: restoring config space at offset 0x4 (was 0xf9ffec00, writing 0xf0003000)
>ehci_hcd 0000:00:02.1: restoring config space at offset 0x1 (was 0xb00006, writing 0xb00002)
>sata_nv 0000:00:07.0: restoring config space at offset 0x9 (was 0xf9ffd000, writing 0xf0001000)
>forcedeth 0000:00:0a.0: BAR 0: set to [mem 0xf0002000-0xf0002fff] (PCI address [0xf0002000-0xf0002fff]
>forcedeth 0000:00:0a.0: BAR 1: set to [io  0xb880-0xb887] (PCI address [0xb880-0xb887]
>forcedeth 0000:00:0a.0: restoring config space at offset 0xf (was 0x14010100, writing 0x14010107)
>forcedeth 0000:00:0a.0: restoring config space at offset 0x1 (was 0xb00000, writing 0xb80007)
>pcieport 0000:00:0b.0: restoring config space at offset 0x1 (was 0x100004, writing 0x100404)
>pci 0000:00:00.0: Found enabled HT MSI Mapping
>pcieport 0000:00:0b.0: Linking AER extended capability
>pcieport 0000:00:0c.0: restoring config space at offset 0x1 (was 0x100004, writing 0x100404)
>pci 0000:00:00.0: Found enabled HT MSI Mapping
>pcieport 0000:00:0c.0: Linking AER extended capability
>pcieport 0000:00:0d.0: restoring config space at offset 0x1 (was 0x100004, writing 0x100404)
>pci 0000:00:00.0: Found enabled HT MSI Mapping
>pcieport 0000:00:0d.0: Linking AER extended capability
>pcieport 0000:00:0e.0: restoring config space at offset 0x7 (was 0x2000e1e1, writing 0xe1e1)
>pcieport 0000:00:0e.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
>pci 0000:00:00.0: Found enabled HT MSI Mapping
>pcieport 0000:00:0e.0: Linking AER extended capability
>EMU10K1_Audigy 0000:01:09.0: restoring config space at offset 0x1 (was 0x2900105, writing 0x2900101)
>Emu10k1_gameport 0000:01:09.1: restoring config space at offset 0x1 (was 0x2900105, writing 0x2900101)
>nouveau 0000:05:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
>PM: early resume of devices complete after 10.871 msecs
>ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 20 (level, low) -> IRQ 20
>ohci_hcd 0000:00:02.0: setting latency timer to 64
>ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 21 (level, low) -> IRQ 21
>ehci_hcd 0000:00:02.1: setting latency timer to 64
>pata_amd 0000:00:06.0: setting latency timer to 64
>sata_nv 0000:00:07.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23
>sata_nv 0000:00:07.0: setting latency timer to 64
>pci 0000:00:09.0: setting latency timer to 64
>forcedeth 0000:00:0a.0: wake-up capability disabled by ACPI
>forcedeth 0000:00:0a.0: PME# disabled
>EMU10K1_Audigy 0000:01:09.0: PCI INT A -> Link[LNKD] -> GSI 19 (level, low) -> IRQ 19
>[drm] nouveau 0000:05:00.0: We're back, enabling device...
>nouveau 0000:05:00.0: PCI INT A -> Link[LNKC] -> GSI 18 (level, low) -> IRQ 18
>nouveau 0000:05:00.0: setting latency timer to 64
>[drm] nouveau 0000:05:00.0: POSTing device...
>[drm] nouveau 0000:05:00.0: Parsing VBIOS init table 0 at offset 0xD0BE
>sd 0:0:0:0: [sda] Starting disk
>sd 2:0:0:0: [sdb] Starting disk
>ata4: port disabled. ignoring.
>serial 00:05: activated
>[drm] nouveau 0000:05:00.0: Parsing VBIOS init table 1 at offset 0xD4D3
>[drm] nouveau 0000:05:00.0: Parsing VBIOS init table 2 at offset 0xE4C4
>[drm] nouveau 0000:05:00.0: Parsing VBIOS init table 3 at offset 0xE60D
>[drm] nouveau 0000:05:00.0: Parsing VBIOS init table 4 at offset 0xE849
>[drm] nouveau 0000:05:00.0: Parsing VBIOS init table at offset 0xE8AE
>[drm] nouveau 0000:05:00.0: 0xC090: parsing output script 0
>[drm] nouveau 0000:05:00.0: 0xC090: parsing output script 0
>[drm] nouveau 0000:05:00.0: 0xAB1C: parsing output script 0
>[drm] nouveau 0000:05:00.0: Reinitialising engines...
>[drm] nouveau 0000:05:00.0: Restoring GPU objects...
>[drm] nouveau 0000:05:00.0: Restoring mode...
>[drm] nouveau 0000:05:00.0: 0xC0AE: parsing output script 1
>[drm] nouveau 0000:05:00.0: 0xC0AF: parsing output script 2
>[drm] nouveau 0000:05:00.0: 0xBDA1: parsing clock script 0
>[drm] nouveau 0000:05:00.0: 0xB6D6: parsing clock script 1
>eth0: no link during initialization.
>ata2: SATA link down (SStatus 0 SControl 300)
>eth0: link up.
>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata1.00: ACPI cmd ef/03:46:00:00:00:a0 (SET FEATURES) filtered out
>ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
>ata1.00: configured for UDMA/133
>ata3.01: ACPI cmd ef/03:42:00:00:00:b0 (SET FEATURES) filtered out
>ata3.01: ACPI cmd ef/03:01:00:00:00:b0 (SET FEATURES) filtered out
>ata3.01: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
>ata3.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
>ata3.00: ACPI cmd ef/03:01:00:00:00:a0 (SET FEATURES) filtered out
>ata3.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
>ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
>ata3: nv_mode_filter: 0x3f39f&0x3f39f->0x3f39f, BIOS=0x3f000 (0xc6c00000) ACPI=0x3f01f (20:60:0x15)
>ata3: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc6c00000) ACPI=0x701f (20:60:0x15)
>ata3.00: configured for UDMA/100
>ata3.01: configured for UDMA/33
>ata3: nv_mode_filter: 0x3f39f&0x3f39f->0x3f39f, BIOS=0x3f000 (0xc6c00000) ACPI=0x3f01f (20:60:0x15)
>ata3: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc6c00000) ACPI=0x701f (20:60:0x15)
>ata3.00: configured for UDMA/100
>ata3.01: configured for UDMA/33
>ata3: EH complete
>PM: resume of devices complete after 3792.834 msecs
>Restarting tasks ... done.
>SMP alternatives: switching to SMP code
>Booting Node 0 Processor 1 APIC 0x1
>usbcore: registered new interface driver hiddev
>input: Logitech USB Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-1/2-1:1.0/input/input2
>generic-usb 0003:046D:C00C.0002: input: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:02.0-1/input0
>usbcore: registered new interface driver usbhid
>usbhid: USB HID core driver
>i2c i2c-0: nForce2 SMBus adapter at 0x5000
>i2c i2c-1: nForce2 SMBus adapter at 0x6000
>w83627ehf: Found W83627EHG chip at 0xa10
>k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
>CPU 1 is now offline
>SMP alternatives: switching to UP code
>usbcore: deregistering interface driver usbhid
>usbcore: deregistering interface driver hiddev
>PM: Syncing filesystems ... done.
>Freezing user space processes ... (elapsed 0.01 seconds) done.
>Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>Suspending console(s) (use no_console_suspend to debug)
>sd 2:0:0:0: [sdb] Synchronizing SCSI cache
>sd 0:0:0:0: [sda] Synchronizing SCSI cache
>sd 2:0:0:0: [sdb] Stopping disk
>ACPI handle has no context!
>serial 00:05: disabled
>[drm] nouveau 0000:05:00.0: Disabling fbcon acceleration...
>[drm] nouveau 0000:05:00.0: Unpinning framebuffer(s)...
>[drm] nouveau 0000:05:00.0: Evicting buffers...
>forcedeth 0000:00:0a.0: PME# enabled
>forcedeth 0000:00:0a.0: wake-up capability enabled by ACPI
>ehci_hcd 0000:00:02.1: PCI INT B disabled
>ohci_hcd 0000:00:02.0: PCI INT A disabled
>ata4: port disabled. ignoring.
>EMU10K1_Audigy 0000:01:09.0: PCI INT A disabled
>ACPI handle has no context!
>sd 0:0:0:0: [sda] Stopping disk
>[drm] nouveau 0000:05:00.0: Idling channels...
>[drm] nouveau 0000:05:00.0: Suspending GPU objects...
>sata_nv 0000:00:07.0: PCI INT A disabled
>[drm] nouveau 0000:05:00.0: And we're gone!
>nouveau 0000:05:00.0: PCI INT A disabled
>PM: suspend of devices complete after 659.585 msecs
>PM: late suspend of devices complete after 22.003 msecs
>ACPI: Preparing to enter system sleep state S3
>Disabling non-boot CPUs ...
>Back to C!
>PCI-DMA: Resuming GART IOMMU
>PCI-DMA: Restoring GART aperture settings
>Force enabled HPET at resume
>ACPI: Waking up from system sleep state S3
>ohci_hcd 0000:00:02.0: restoring config space at offset 0x4 (was 0xf9fff000, writing 0xf0000000)
>ohci_hcd 0000:00:02.0: restoring config space at offset 0x1 (was 0xb00007, writing 0xb00003)
>ehci_hcd 0000:00:02.1: restoring config space at offset 0x4 (was 0xf9ffec00, writing 0xf0003000)
>ehci_hcd 0000:00:02.1: restoring config space at offset 0x1 (was 0xb00006, writing 0xb00002)
>sata_nv 0000:00:07.0: restoring config space at offset 0x9 (was 0xf9ffd000, writing 0xf0001000)
>forcedeth 0000:00:0a.0: BAR 0: set to [mem 0xf0002000-0xf0002fff] (PCI address [0xf0002000-0xf0002fff]
>forcedeth 0000:00:0a.0: BAR 1: set to [io  0xb880-0xb887] (PCI address [0xb880-0xb887]
>forcedeth 0000:00:0a.0: restoring config space at offset 0xf (was 0x14010100, writing 0x14010107)
>forcedeth 0000:00:0a.0: restoring config space at offset 0x1 (was 0xb00000, writing 0xb80007)
>pcieport 0000:00:0b.0: restoring config space at offset 0x1 (was 0x100004, writing 0x100404)
>pci 0000:00:00.0: Found enabled HT MSI Mapping
>pcieport 0000:00:0b.0: Linking AER extended capability
>pcieport 0000:00:0c.0: restoring config space at offset 0x1 (was 0x100004, writing 0x100404)
>pci 0000:00:00.0: Found enabled HT MSI Mapping
>pcieport 0000:00:0c.0: Linking AER extended capability
>pcieport 0000:00:0d.0: restoring config space at offset 0x1 (was 0x100004, writing 0x100404)
>pci 0000:00:00.0: Found enabled HT MSI Mapping
>pcieport 0000:00:0d.0: Linking AER extended capability
>pcieport 0000:00:0e.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
>pci 0000:00:00.0: Found enabled HT MSI Mapping
>pcieport 0000:00:0e.0: Linking AER extended capability
>EMU10K1_Audigy 0000:01:09.0: restoring config space at offset 0x1 (was 0x2900105, writing 0x2900101)
>Emu10k1_gameport 0000:01:09.1: restoring config space at offset 0x1 (was 0x2900105, writing 0x2900101)
>nouveau 0000:05:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
>PM: early resume of devices complete after 10.838 msecs
>ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 20 (level, low) -> IRQ 20
>ohci_hcd 0000:00:02.0: setting latency timer to 64
>ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 21 (level, low) -> IRQ 21
>ehci_hcd 0000:00:02.1: setting latency timer to 64
>pata_amd 0000:00:06.0: setting latency timer to 64
>sata_nv 0000:00:07.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23
>sata_nv 0000:00:07.0: setting latency timer to 64
>pci 0000:00:09.0: setting latency timer to 64
>forcedeth 0000:00:0a.0: wake-up capability disabled by ACPI
>forcedeth 0000:00:0a.0: PME# disabled
>EMU10K1_Audigy 0000:01:09.0: PCI INT A -> Link[LNKD] -> GSI 19 (level, low) -> IRQ 19
>[drm] nouveau 0000:05:00.0: We're back, enabling device...
>nouveau 0000:05:00.0: PCI INT A -> Link[LNKC] -> GSI 18 (level, low) -> IRQ 18
>nouveau 0000:05:00.0: setting latency timer to 64
>[drm] nouveau 0000:05:00.0: POSTing device...
>[drm] nouveau 0000:05:00.0: Parsing VBIOS init table 0 at offset 0xD0BE
>sd 0:0:0:0: [sda] Starting disk
>sd 2:0:0:0: [sdb] Starting disk
>ata4: port disabled. ignoring.
>serial 00:05: activated
>[drm] nouveau 0000:05:00.0: Parsing VBIOS init table 1 at offset 0xD4D3
>[drm] nouveau 0000:05:00.0: Parsing VBIOS init table 2 at offset 0xE4C4
>[drm] nouveau 0000:05:00.0: Parsing VBIOS init table 3 at offset 0xE60D
>[drm] nouveau 0000:05:00.0: Parsing VBIOS init table 4 at offset 0xE849
>[drm] nouveau 0000:05:00.0: Parsing VBIOS init table at offset 0xE8AE
>[drm] nouveau 0000:05:00.0: 0xC090: parsing output script 0
>[drm] nouveau 0000:05:00.0: 0xC090: parsing output script 0
>[drm] nouveau 0000:05:00.0: 0xAB1C: parsing output script 0
>[drm] nouveau 0000:05:00.0: Reinitialising engines...
>[drm] nouveau 0000:05:00.0: Restoring GPU objects...
>[drm] nouveau 0000:05:00.0: Restoring mode...
>[drm] nouveau 0000:05:00.0: 0xC0AE: parsing output script 1
>[drm] nouveau 0000:05:00.0: 0xC0AF: parsing output script 2
>[drm] nouveau 0000:05:00.0: 0xBDA1: parsing clock script 0
>[drm] nouveau 0000:05:00.0: 0xB6D6: parsing clock script 1
>eth0: no link during initialization.
>ata2: SATA link down (SStatus 0 SControl 300)
>eth0: link up.
>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata1.00: ACPI cmd ef/03:46:00:00:00:a0 (SET FEATURES) filtered out
>ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
>ata1.00: configured for UDMA/133
>ata3.01: ACPI cmd ef/03:42:00:00:00:b0 (SET FEATURES) filtered out
>ata3.01: ACPI cmd ef/03:01:00:00:00:b0 (SET FEATURES) filtered out
>ata3.01: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
>ata3.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
>ata3.00: ACPI cmd ef/03:01:00:00:00:a0 (SET FEATURES) filtered out
>ata3.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
>ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
>ata3: nv_mode_filter: 0x3f39f&0x3f39f->0x3f39f, BIOS=0x3f000 (0xc6c00000) ACPI=0x3f01f (20:60:0x15)
>ata3: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc6c00000) ACPI=0x701f (20:60:0x15)
>ata3.00: configured for UDMA/100
>ata3.01: configured for UDMA/33
>ata3: nv_mode_filter: 0x3f39f&0x3f39f->0x3f39f, BIOS=0x3f000 (0xc6c00000) ACPI=0x3f01f (20:60:0x15)
>ata3: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc6c00000) ACPI=0x701f (20:60:0x15)
>ata3.00: configured for UDMA/100
>ata3.01: configured for UDMA/33
>ata3: EH complete
>PM: resume of devices complete after 3540.829 msecs
>Restarting tasks ... done.
>SMP alternatives: switching to SMP code
>Booting Node 0 Processor 1 APIC 0x1
>usbcore: registered new interface driver hiddev
>input: Logitech USB Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-1/2-1:1.0/input/input3
>generic-usb 0003:046D:C00C.0003: input: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:02.0-1/input0
>usbcore: registered new interface driver usbhid
>usbhid: USB HID core driver
>i2c i2c-0: nForce2 SMBus adapter at 0x5000
>i2c i2c-1: nForce2 SMBus adapter at 0x6000
>w83627ehf: Found W83627EHG chip at 0xa10
>k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
>[drm] nouveau 0000:05:00.0: Allocating FIFO number 4
>[drm] nouveau 0000:05:00.0: nouveau_channel_alloc: initialised FIFO 4
>[drm] nouveau 0000:05:00.0: Allocating FIFO number 5
>[drm] nouveau 0000:05:00.0: nouveau_channel_alloc: initialised FIFO 5
>CPU 1 is now offline
>SMP alternatives: switching to UP code
>usbcore: deregistering interface driver usbhid
>usbcore: deregistering interface driver hiddev
>PM: Syncing filesystems ... done.
>Freezing user space processes ... (elapsed 0.01 seconds) done.
>Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>Suspending console(s) (use no_console_suspend to debug)
>sd 2:0:0:0: [sdb] Synchronizing SCSI cache
>sd 0:0:0:0: [sda] Synchronizing SCSI cache
>sd 2:0:0:0: [sdb] Stopping disk
>ACPI handle has no context!
>serial 00:05: disabled
>[drm] nouveau 0000:05:00.0: Disabling fbcon acceleration...
>[drm] nouveau 0000:05:00.0: Unpinning framebuffer(s)...
>[drm] nouveau 0000:05:00.0: Evicting buffers...
>forcedeth 0000:00:0a.0: PME# enabled
>forcedeth 0000:00:0a.0: wake-up capability enabled by ACPI
>ehci_hcd 0000:00:02.1: PCI INT B disabled
>ohci_hcd 0000:00:02.0: PCI INT A disabled
>ata4: port disabled. ignoring.
>EMU10K1_Audigy 0000:01:09.0: PCI INT A disabled
>ACPI handle has no context!
>sd 0:0:0:0: [sda] Stopping disk
>[drm] nouveau 0000:05:00.0: Idling channels...
>[drm] nouveau 0000:05:00.0: Suspending GPU objects...
>sata_nv 0000:00:07.0: PCI INT A disabled
>[drm] nouveau 0000:05:00.0: And we're gone!
>nouveau 0000:05:00.0: PCI INT A disabled
>PM: suspend of devices complete after 950.579 msecs
>PM: late suspend of devices complete after 22.005 msecs
>ACPI: Preparing to enter system sleep state S3
>Disabling non-boot CPUs ...
>Back to C!
>PCI-DMA: Resuming GART IOMMU
>PCI-DMA: Restoring GART aperture settings
>Force enabled HPET at resume
>ACPI: Waking up from system sleep state S3
>ohci_hcd 0000:00:02.0: restoring config space at offset 0x4 (was 0xf9fff000, writing 0xf0000000)
>ohci_hcd 0000:00:02.0: restoring config space at offset 0x1 (was 0xb00007, writing 0xb00003)
>ehci_hcd 0000:00:02.1: restoring config space at offset 0x4 (was 0xf9ffec00, writing 0xf0003000)
>ehci_hcd 0000:00:02.1: restoring config space at offset 0x1 (was 0xb00006, writing 0xb00002)
>sata_nv 0000:00:07.0: restoring config space at offset 0x9 (was 0xf9ffd000, writing 0xf0001000)
>forcedeth 0000:00:0a.0: BAR 0: set to [mem 0xf0002000-0xf0002fff] (PCI address [0xf0002000-0xf0002fff]
>forcedeth 0000:00:0a.0: BAR 1: set to [io  0xb880-0xb887] (PCI address [0xb880-0xb887]
>forcedeth 0000:00:0a.0: restoring config space at offset 0xf (was 0x14010100, writing 0x14010107)
>forcedeth 0000:00:0a.0: restoring config space at offset 0x1 (was 0xb00000, writing 0xb80007)
>pcieport 0000:00:0b.0: restoring config space at offset 0x1 (was 0x100004, writing 0x100404)
>pci 0000:00:00.0: Found enabled HT MSI Mapping
>pcieport 0000:00:0b.0: Linking AER extended capability
>pcieport 0000:00:0c.0: restoring config space at offset 0x1 (was 0x100004, writing 0x100404)
>pci 0000:00:00.0: Found enabled HT MSI Mapping
>pcieport 0000:00:0c.0: Linking AER extended capability
>pcieport 0000:00:0d.0: restoring config space at offset 0x1 (was 0x100004, writing 0x100404)
>pci 0000:00:00.0: Found enabled HT MSI Mapping
>pcieport 0000:00:0d.0: Linking AER extended capability
>pcieport 0000:00:0e.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
>pci 0000:00:00.0: Found enabled HT MSI Mapping
>pcieport 0000:00:0e.0: Linking AER extended capability
>EMU10K1_Audigy 0000:01:09.0: restoring config space at offset 0x1 (was 0x2900105, writing 0x2900101)
>Emu10k1_gameport 0000:01:09.1: restoring config space at offset 0x1 (was 0x2900105, writing 0x2900101)
>nouveau 0000:05:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
>PM: early resume of devices complete after 10.827 msecs
>ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 20 (level, low) -> IRQ 20
>ohci_hcd 0000:00:02.0: setting latency timer to 64
>ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 21 (level, low) -> IRQ 21
>ehci_hcd 0000:00:02.1: setting latency timer to 64
>pata_amd 0000:00:06.0: setting latency timer to 64
>sata_nv 0000:00:07.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23
>sata_nv 0000:00:07.0: setting latency timer to 64
>pci 0000:00:09.0: setting latency timer to 64
>forcedeth 0000:00:0a.0: wake-up capability disabled by ACPI
>forcedeth 0000:00:0a.0: PME# disabled
>EMU10K1_Audigy 0000:01:09.0: PCI INT A -> Link[LNKD] -> GSI 19 (level, low) -> IRQ 19
>[drm] nouveau 0000:05:00.0: We're back, enabling device...
>nouveau 0000:05:00.0: PCI INT A -> Link[LNKC] -> GSI 18 (level, low) -> IRQ 18
>nouveau 0000:05:00.0: setting latency timer to 64
>[drm] nouveau 0000:05:00.0: POSTing device...
>[drm] nouveau 0000:05:00.0: Parsing VBIOS init table 0 at offset 0xD0BE
>sd 0:0:0:0: [sda] Starting disk
>sd 2:0:0:0: [sdb] Starting disk
>ata4: port disabled. ignoring.
>serial 00:05: activated
>[drm] nouveau 0000:05:00.0: Parsing VBIOS init table 1 at offset 0xD4D3
>[drm] nouveau 0000:05:00.0: Parsing VBIOS init table 2 at offset 0xE4C4
>[drm] nouveau 0000:05:00.0: Parsing VBIOS init table 3 at offset 0xE60D
>[drm] nouveau 0000:05:00.0: Parsing VBIOS init table 4 at offset 0xE849
>[drm] nouveau 0000:05:00.0: Parsing VBIOS init table at offset 0xE8AE
>[drm] nouveau 0000:05:00.0: 0xC090: parsing output script 0
>[drm] nouveau 0000:05:00.0: 0xC090: parsing output script 0
>[drm] nouveau 0000:05:00.0: 0xAB1C: parsing output script 0
>[drm] nouveau 0000:05:00.0: Reinitialising engines...
>[drm] nouveau 0000:05:00.0: Restoring GPU objects...
>[drm] nouveau 0000:05:00.0: Restoring mode...
>[drm] nouveau 0000:05:00.0: 0xC0AE: parsing output script 1
>[drm] nouveau 0000:05:00.0: 0xC0AF: parsing output script 2
>[drm] nouveau 0000:05:00.0: 0xBDA1: parsing clock script 0
>[drm] nouveau 0000:05:00.0: 0xB6D6: parsing clock script 1
>eth0: no link during initialization.
>ata2: SATA link down (SStatus 0 SControl 300)
>eth0: link up.
>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata1.00: ACPI cmd ef/03:46:00:00:00:a0 (SET FEATURES) filtered out
>ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
>ata1.00: configured for UDMA/133
>ata3.01: ACPI cmd ef/03:42:00:00:00:b0 (SET FEATURES) filtered out
>ata3.01: ACPI cmd ef/03:01:00:00:00:b0 (SET FEATURES) filtered out
>ata3.01: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
>ata3.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
>ata3.00: ACPI cmd ef/03:01:00:00:00:a0 (SET FEATURES) filtered out
>ata3.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
>ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
>ata3: nv_mode_filter: 0x3f39f&0x3f39f->0x3f39f, BIOS=0x3f000 (0xc6c00000) ACPI=0x3f01f (20:60:0x15)
>ata3: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc6c00000) ACPI=0x701f (20:60:0x15)
>ata3.00: configured for UDMA/100
>ata3.01: configured for UDMA/33
>ata3: nv_mode_filter: 0x3f39f&0x3f39f->0x3f39f, BIOS=0x3f000 (0xc6c00000) ACPI=0x3f01f (20:60:0x15)
>ata3: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc6c00000) ACPI=0x701f (20:60:0x15)
>ata3.00: configured for UDMA/100
>ata3.01: configured for UDMA/33
>ata3: EH complete
>PM: resume of devices complete after 4354.818 msecs
>Restarting tasks ... done.
>SMP alternatives: switching to SMP code
>Booting Node 0 Processor 1 APIC 0x1
>usbcore: registered new interface driver hiddev
>input: Logitech USB Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-1/2-1:1.0/input/input4
>generic-usb 0003:046D:C00C.0004: input: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:02.0-1/input0
>usbcore: registered new interface driver usbhid
>usbhid: USB HID core driver
>i2c i2c-0: nForce2 SMBus adapter at 0x5000
>i2c i2c-1: nForce2 SMBus adapter at 0x6000
>w83627ehf: Found W83627EHG chip at 0xa10
>k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
>Hangcheck: hangcheck value past margin!
>CPU 1 is now offline
>SMP alternatives: switching to UP code
>usbcore: deregistering interface driver usbhid
>usbcore: deregistering interface driver hiddev
>PM: Syncing filesystems ... done.
>Freezing user space processes ... (elapsed 0.01 seconds) done.
>Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>Suspending console(s) (use no_console_suspend to debug)
>sd 2:0:0:0: [sdb] Synchronizing SCSI cache
>sd 0:0:0:0: [sda] Synchronizing SCSI cache
>sd 2:0:0:0: [sdb] Stopping disk
>ACPI handle has no context!
>serial 00:05: disabled
>[drm] nouveau 0000:05:00.0: Disabling fbcon acceleration...
>[drm] nouveau 0000:05:00.0: Unpinning framebuffer(s)...
>[drm] nouveau 0000:05:00.0: Evicting buffers...
>forcedeth 0000:00:0a.0: PME# enabled
>forcedeth 0000:00:0a.0: wake-up capability enabled by ACPI
>ehci_hcd 0000:00:02.1: PCI INT B disabled
>ohci_hcd 0000:00:02.0: PCI INT A disabled
>ata4: port disabled. ignoring.
>EMU10K1_Audigy 0000:01:09.0: PCI INT A disabled
>ACPI handle has no context!
>sd 0:0:0:0: [sda] Stopping disk
>[drm] nouveau 0000:05:00.0: Idling channels...
>[drm] nouveau 0000:05:00.0: Suspending GPU objects...
>sata_nv 0000:00:07.0: PCI INT A disabled
>[drm] nouveau 0000:05:00.0: And we're gone!
>nouveau 0000:05:00.0: PCI INT A disabled
>PM: suspend of devices complete after 881.569 msecs
>PM: late suspend of devices complete after 22.004 msecs
>ACPI: Preparing to enter system sleep state S3
>Disabling non-boot CPUs ...
>Back to C!
>PCI-DMA: Resuming GART IOMMU
>PCI-DMA: Restoring GART aperture settings
>Force enabled HPET at resume
>ACPI: Waking up from system sleep state S3
>ohci_hcd 0000:00:02.0: restoring config space at offset 0x4 (was 0xf9fff000, writing 0xf0000000)
>ohci_hcd 0000:00:02.0: restoring config space at offset 0x1 (was 0xb00007, writing 0xb00003)
>ehci_hcd 0000:00:02.1: restoring config space at offset 0x4 (was 0xf9ffec00, writing 0xf0003000)
>ehci_hcd 0000:00:02.1: restoring config space at offset 0x1 (was 0xb00006, writing 0xb00002)
>sata_nv 0000:00:07.0: restoring config space at offset 0x9 (was 0xf9ffd000, writing 0xf0001000)
>forcedeth 0000:00:0a.0: BAR 0: set to [mem 0xf0002000-0xf0002fff] (PCI address [0xf0002000-0xf0002fff]
>forcedeth 0000:00:0a.0: BAR 1: set to [io  0xb880-0xb887] (PCI address [0xb880-0xb887]
>forcedeth 0000:00:0a.0: restoring config space at offset 0xf (was 0x14010100, writing 0x14010107)
>forcedeth 0000:00:0a.0: restoring config space at offset 0x1 (was 0xb00000, writing 0xb80007)
>pcieport 0000:00:0b.0: restoring config space at offset 0x1 (was 0x100004, writing 0x100404)
>pci 0000:00:00.0: Found enabled HT MSI Mapping
>pcieport 0000:00:0b.0: Linking AER extended capability
>pcieport 0000:00:0c.0: restoring config space at offset 0x1 (was 0x100004, writing 0x100404)
>pci 0000:00:00.0: Found enabled HT MSI Mapping
>pcieport 0000:00:0c.0: Linking AER extended capability
>pcieport 0000:00:0d.0: restoring config space at offset 0x1 (was 0x100004, writing 0x100404)
>pci 0000:00:00.0: Found enabled HT MSI Mapping
>pcieport 0000:00:0d.0: Linking AER extended capability
>pcieport 0000:00:0e.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
>pci 0000:00:00.0: Found enabled HT MSI Mapping
>pcieport 0000:00:0e.0: Linking AER extended capability
>EMU10K1_Audigy 0000:01:09.0: restoring config space at offset 0x1 (was 0x2900105, writing 0x2900101)
>Emu10k1_gameport 0000:01:09.1: restoring config space at offset 0x1 (was 0x2900105, writing 0x2900101)
>nouveau 0000:05:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
>PM: early resume of devices complete after 10.839 msecs
>ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 20 (level, low) -> IRQ 20
>ohci_hcd 0000:00:02.0: setting latency timer to 64
>ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 21 (level, low) -> IRQ 21
>ehci_hcd 0000:00:02.1: setting latency timer to 64
>pata_amd 0000:00:06.0: setting latency timer to 64
>sata_nv 0000:00:07.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23
>sata_nv 0000:00:07.0: setting latency timer to 64
>pci 0000:00:09.0: setting latency timer to 64
>forcedeth 0000:00:0a.0: wake-up capability disabled by ACPI
>forcedeth 0000:00:0a.0: PME# disabled
>EMU10K1_Audigy 0000:01:09.0: PCI INT A -> Link[LNKD] -> GSI 19 (level, low) -> IRQ 19
>[drm] nouveau 0000:05:00.0: We're back, enabling device...
>nouveau 0000:05:00.0: PCI INT A -> Link[LNKC] -> GSI 18 (level, low) -> IRQ 18
>nouveau 0000:05:00.0: setting latency timer to 64
>[drm] nouveau 0000:05:00.0: POSTing device...
>[drm] nouveau 0000:05:00.0: Parsing VBIOS init table 0 at offset 0xD0BE
>sd 0:0:0:0: [sda] Starting disk
>sd 2:0:0:0: [sdb] Starting disk
>ata4: port disabled. ignoring.
>serial 00:05: activated
>[drm] nouveau 0000:05:00.0: Parsing VBIOS init table 1 at offset 0xD4D3
>[drm] nouveau 0000:05:00.0: Parsing VBIOS init table 2 at offset 0xE4C4
>[drm] nouveau 0000:05:00.0: Parsing VBIOS init table 3 at offset 0xE60D
>[drm] nouveau 0000:05:00.0: Parsing VBIOS init table 4 at offset 0xE849
>[drm] nouveau 0000:05:00.0: Parsing VBIOS init table at offset 0xE8AE
>[drm] nouveau 0000:05:00.0: 0xC090: parsing output script 0
>[drm] nouveau 0000:05:00.0: 0xC090: parsing output script 0
>[drm] nouveau 0000:05:00.0: 0xAB1C: parsing output script 0
>[drm] nouveau 0000:05:00.0: Reinitialising engines...
>[drm] nouveau 0000:05:00.0: Restoring GPU objects...
>[drm] nouveau 0000:05:00.0: Restoring mode...
>[drm] nouveau 0000:05:00.0: 0xC0AE: parsing output script 1
>[drm] nouveau 0000:05:00.0: 0xC0AF: parsing output script 2
>[drm] nouveau 0000:05:00.0: 0xBDA1: parsing clock script 0
>[drm] nouveau 0000:05:00.0: 0xB6D6: parsing clock script 1
>eth0: no link during initialization.
>ata2: SATA link down (SStatus 0 SControl 300)
>eth0: link up.
>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata1.00: ACPI cmd ef/03:46:00:00:00:a0 (SET FEATURES) filtered out
>ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
>ata1.00: configured for UDMA/133
>ata3.01: ACPI cmd ef/03:42:00:00:00:b0 (SET FEATURES) filtered out
>ata3.01: ACPI cmd ef/03:01:00:00:00:b0 (SET FEATURES) filtered out
>ata3.01: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
>ata3.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
>ata3.00: ACPI cmd ef/03:01:00:00:00:a0 (SET FEATURES) filtered out
>ata3.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
>ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
>ata3: nv_mode_filter: 0x3f39f&0x3f39f->0x3f39f, BIOS=0x3f000 (0xc6c00000) ACPI=0x3f01f (20:60:0x15)
>ata3: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc6c00000) ACPI=0x701f (20:60:0x15)
>ata3.00: configured for UDMA/100
>ata3.01: configured for UDMA/33
>ata3: nv_mode_filter: 0x3f39f&0x3f39f->0x3f39f, BIOS=0x3f000 (0xc6c00000) ACPI=0x3f01f (20:60:0x15)
>ata3: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc6c00000) ACPI=0x701f (20:60:0x15)
>ata3.00: configured for UDMA/100
>ata3.01: configured for UDMA/33
>ata3: EH complete
>PM: resume of devices complete after 4471.872 msecs
>Restarting tasks ... done.
>SMP alternatives: switching to SMP code
>Booting Node 0 Processor 1 APIC 0x1
>usbcore: registered new interface driver hiddev
>input: Logitech USB Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-1/2-1:1.0/input/input5
>generic-usb 0003:046D:C00C.0005: input: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:02.0-1/input0
>usbcore: registered new interface driver usbhid
>usbhid: USB HID core driver
>i2c i2c-0: nForce2 SMBus adapter at 0x5000
>i2c i2c-1: nForce2 SMBus adapter at 0x6000
>w83627ehf: Found W83627EHG chip at 0xa10
>k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
>CPU 1 is now offline
>SMP alternatives: switching to UP code
>usbcore: deregistering interface driver usbhid
>usbcore: deregistering interface driver hiddev
>PM: Syncing filesystems ... done.
>Freezing user space processes ... (elapsed 0.01 seconds) done.
>Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>Suspending console(s) (use no_console_suspend to debug)
>sd 2:0:0:0: [sdb] Synchronizing SCSI cache
>sd 0:0:0:0: [sda] Synchronizing SCSI cache
>sd 2:0:0:0: [sdb] Stopping disk
>ACPI handle has no context!
>serial 00:05: disabled
>[drm] nouveau 0000:05:00.0: Disabling fbcon acceleration...
>[drm] nouveau 0000:05:00.0: Unpinning framebuffer(s)...
>[drm] nouveau 0000:05:00.0: Evicting buffers...
>forcedeth 0000:00:0a.0: PME# enabled
>forcedeth 0000:00:0a.0: wake-up capability enabled by ACPI
>ehci_hcd 0000:00:02.1: PCI INT B disabled
>ohci_hcd 0000:00:02.0: PCI INT A disabled
>ata4: port disabled. ignoring.
>EMU10K1_Audigy 0000:01:09.0: PCI INT A disabled
>ACPI handle has no context!
>sd 0:0:0:0: [sda] Stopping disk
>[drm] nouveau 0000:05:00.0: Idling channels...
>[drm] nouveau 0000:05:00.0: Suspending GPU objects...
>sata_nv 0000:00:07.0: PCI INT A disabled
>[drm] nouveau 0000:05:00.0: And we're gone!
>nouveau 0000:05:00.0: PCI INT A disabled
>PM: suspend of devices complete after 916.578 msecs
>PM: late suspend of devices complete after 22.006 msecs
>ACPI: Preparing to enter system sleep state S3
>Disabling non-boot CPUs ...
>Back to C!
>PCI-DMA: Resuming GART IOMMU
>PCI-DMA: Restoring GART aperture settings
>Force enabled HPET at resume
>ACPI: Waking up from system sleep state S3
>ohci_hcd 0000:00:02.0: restoring config space at offset 0x4 (was 0xf9fff000, writing 0xf0000000)
>ohci_hcd 0000:00:02.0: restoring config space at offset 0x1 (was 0xb00007, writing 0xb00003)
>ehci_hcd 0000:00:02.1: restoring config space at offset 0x4 (was 0xf9ffec00, writing 0xf0003000)
>ehci_hcd 0000:00:02.1: restoring config space at offset 0x1 (was 0xb00006, writing 0xb00002)
>sata_nv 0000:00:07.0: restoring config space at offset 0x9 (was 0xf9ffd000, writing 0xf0001000)
>forcedeth 0000:00:0a.0: BAR 0: set to [mem 0xf0002000-0xf0002fff] (PCI address [0xf0002000-0xf0002fff]
>forcedeth 0000:00:0a.0: BAR 1: set to [io  0xb880-0xb887] (PCI address [0xb880-0xb887]
>forcedeth 0000:00:0a.0: restoring config space at offset 0xf (was 0x14010100, writing 0x14010107)
>forcedeth 0000:00:0a.0: restoring config space at offset 0x1 (was 0xb00000, writing 0xb80007)
>pcieport 0000:00:0b.0: restoring config space at offset 0x1 (was 0x100004, writing 0x100404)
>pci 0000:00:00.0: Found enabled HT MSI Mapping
>pcieport 0000:00:0b.0: Linking AER extended capability
>pcieport 0000:00:0c.0: restoring config space at offset 0x1 (was 0x100004, writing 0x100404)
>pci 0000:00:00.0: Found enabled HT MSI Mapping
>pcieport 0000:00:0c.0: Linking AER extended capability
>pcieport 0000:00:0d.0: restoring config space at offset 0x1 (was 0x100004, writing 0x100404)
>pci 0000:00:00.0: Found enabled HT MSI Mapping
>pcieport 0000:00:0d.0: Linking AER extended capability
>pcieport 0000:00:0e.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
>pci 0000:00:00.0: Found enabled HT MSI Mapping
>pcieport 0000:00:0e.0: Linking AER extended capability
>EMU10K1_Audigy 0000:01:09.0: restoring config space at offset 0x1 (was 0x2900105, writing 0x2900101)
>Emu10k1_gameport 0000:01:09.1: restoring config space at offset 0x1 (was 0x2900105, writing 0x2900101)
>nouveau 0000:05:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
>PM: early resume of devices complete after 10.842 msecs
>ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 20 (level, low) -> IRQ 20
>ohci_hcd 0000:00:02.0: setting latency timer to 64
>ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 21 (level, low) -> IRQ 21
>ehci_hcd 0000:00:02.1: setting latency timer to 64
>pata_amd 0000:00:06.0: setting latency timer to 64
>sata_nv 0000:00:07.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23
>sata_nv 0000:00:07.0: setting latency timer to 64
>pci 0000:00:09.0: setting latency timer to 64
>forcedeth 0000:00:0a.0: wake-up capability disabled by ACPI
>forcedeth 0000:00:0a.0: PME# disabled
>EMU10K1_Audigy 0000:01:09.0: PCI INT A -> Link[LNKD] -> GSI 19 (level, low) -> IRQ 19
>[drm] nouveau 0000:05:00.0: We're back, enabling device...
>nouveau 0000:05:00.0: PCI INT A -> Link[LNKC] -> GSI 18 (level, low) -> IRQ 18
>nouveau 0000:05:00.0: setting latency timer to 64
>[drm] nouveau 0000:05:00.0: POSTing device...
>[drm] nouveau 0000:05:00.0: Parsing VBIOS init table 0 at offset 0xD0BE
>sd 0:0:0:0: [sda] Starting disk
>sd 2:0:0:0: [sdb] Starting disk
>ata4: port disabled. ignoring.
>serial 00:05: activated
>[drm] nouveau 0000:05:00.0: Parsing VBIOS init table 1 at offset 0xD4D3
>[drm] nouveau 0000:05:00.0: Parsing VBIOS init table 2 at offset 0xE4C4
>[drm] nouveau 0000:05:00.0: Parsing VBIOS init table 3 at offset 0xE60D
>[drm] nouveau 0000:05:00.0: Parsing VBIOS init table 4 at offset 0xE849
>[drm] nouveau 0000:05:00.0: Parsing VBIOS init table at offset 0xE8AE
>[drm] nouveau 0000:05:00.0: 0xC090: parsing output script 0
>[drm] nouveau 0000:05:00.0: 0xC090: parsing output script 0
>[drm] nouveau 0000:05:00.0: 0xAB1C: parsing output script 0
>[drm] nouveau 0000:05:00.0: Reinitialising engines...
>[drm] nouveau 0000:05:00.0: Restoring GPU objects...
>[drm] nouveau 0000:05:00.0: Restoring mode...
>[drm] nouveau 0000:05:00.0: 0xC0AE: parsing output script 1
>[drm] nouveau 0000:05:00.0: 0xC0AF: parsing output script 2
>[drm] nouveau 0000:05:00.0: 0xBDA1: parsing clock script 0
>[drm] nouveau 0000:05:00.0: 0xB6D6: parsing clock script 1
>eth0: no link during initialization.
>ata2: SATA link down (SStatus 0 SControl 300)
>eth0: link up.
>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata1.00: ACPI cmd ef/03:46:00:00:00:a0 (SET FEATURES) filtered out
>ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
>ata1.00: configured for UDMA/133
>ata3.01: ACPI cmd ef/03:42:00:00:00:b0 (SET FEATURES) filtered out
>ata3.01: ACPI cmd ef/03:01:00:00:00:b0 (SET FEATURES) filtered out
>ata3.01: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
>ata3.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
>ata3.00: ACPI cmd ef/03:01:00:00:00:a0 (SET FEATURES) filtered out
>ata3.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
>ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
>ata3: nv_mode_filter: 0x3f39f&0x3f39f->0x3f39f, BIOS=0x3f000 (0xc6c00000) ACPI=0x3f01f (20:60:0x15)
>ata3: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc6c00000) ACPI=0x701f (20:60:0x15)
>ata3.00: configured for UDMA/100
>ata3.01: configured for UDMA/33
>ata3: nv_mode_filter: 0x3f39f&0x3f39f->0x3f39f, BIOS=0x3f000 (0xc6c00000) ACPI=0x3f01f (20:60:0x15)
>ata3: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc6c00000) ACPI=0x701f (20:60:0x15)
>ata3.00: configured for UDMA/100
>ata3.01: configured for UDMA/33
>ata3: EH complete
>PM: resume of devices complete after 5268.385 msecs
>Restarting tasks ... done.
>SMP alternatives: switching to SMP code
>Booting Node 0 Processor 1 APIC 0x1
>usbcore: registered new interface driver hiddev
>input: Logitech USB Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-1/2-1:1.0/input/input6
>generic-usb 0003:046D:C00C.0006: input: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:02.0-1/input0
>usbcore: registered new interface driver usbhid
>usbhid: USB HID core driver
>i2c i2c-0: nForce2 SMBus adapter at 0x5000
>i2c i2c-1: nForce2 SMBus adapter at 0x6000
>w83627ehf: Found W83627EHG chip at 0xa10
>k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
>CPU 1 is now offline
>SMP alternatives: switching to UP code
>usbcore: deregistering interface driver usbhid
>usbcore: deregistering interface driver hiddev
>PM: Syncing filesystems ... done.
>Freezing user space processes ... (elapsed 0.01 seconds) done.
>Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>Suspending console(s) (use no_console_suspend to debug)
>sd 2:0:0:0: [sdb] Synchronizing SCSI cache
>sd 0:0:0:0: [sda] Synchronizing SCSI cache
>sd 2:0:0:0: [sdb] Stopping disk
>ACPI handle has no context!
>serial 00:05: disabled
>[drm] nouveau 0000:05:00.0: Disabling fbcon acceleration...
>[drm] nouveau 0000:05:00.0: Unpinning framebuffer(s)...
>[drm] nouveau 0000:05:00.0: Evicting buffers...
>forcedeth 0000:00:0a.0: PME# enabled
>forcedeth 0000:00:0a.0: wake-up capability enabled by ACPI
>ehci_hcd 0000:00:02.1: PCI INT B disabled
>ohci_hcd 0000:00:02.0: PCI INT A disabled
>ata4: port disabled. ignoring.
>EMU10K1_Audigy 0000:01:09.0: PCI INT A disabled
>ACPI handle has no context!
>sd 0:0:0:0: [sda] Stopping disk
>[drm] nouveau 0000:05:00.0: Idling channels...
>[drm] nouveau 0000:05:00.0: Suspending GPU objects...
>sata_nv 0000:00:07.0: PCI INT A disabled
>[drm] nouveau 0000:05:00.0: And we're gone!
>nouveau 0000:05:00.0: PCI INT A disabled
>PM: suspend of devices complete after 982.561 msecs
>PM: late suspend of devices complete after 22.023 msecs
>ACPI: Preparing to enter system sleep state S3
>Disabling non-boot CPUs ...
>Back to C!
>PCI-DMA: Resuming GART IOMMU
>PCI-DMA: Restoring GART aperture settings
>Force enabled HPET at resume
>ACPI: Waking up from system sleep state S3
>ohci_hcd 0000:00:02.0: restoring config space at offset 0x4 (was 0xf9fff000, writing 0xf0000000)
>ohci_hcd 0000:00:02.0: restoring config space at offset 0x1 (was 0xb00007, writing 0xb00003)
>ehci_hcd 0000:00:02.1: restoring config space at offset 0x4 (was 0xf9ffec00, writing 0xf0003000)
>ehci_hcd 0000:00:02.1: restoring config space at offset 0x1 (was 0xb00006, writing 0xb00002)
>sata_nv 0000:00:07.0: restoring config space at offset 0x9 (was 0xf9ffd000, writing 0xf0001000)
>forcedeth 0000:00:0a.0: BAR 0: set to [mem 0xf0002000-0xf0002fff] (PCI address [0xf0002000-0xf0002fff]
>forcedeth 0000:00:0a.0: BAR 1: set to [io  0xb880-0xb887] (PCI address [0xb880-0xb887]
>forcedeth 0000:00:0a.0: restoring config space at offset 0xf (was 0x14010100, writing 0x14010107)
>forcedeth 0000:00:0a.0: restoring config space at offset 0x1 (was 0xb00000, writing 0xb80007)
>pcieport 0000:00:0b.0: restoring config space at offset 0x1 (was 0x100004, writing 0x100404)
>pci 0000:00:00.0: Found enabled HT MSI Mapping
>pcieport 0000:00:0b.0: Linking AER extended capability
>pcieport 0000:00:0c.0: restoring config space at offset 0x1 (was 0x100004, writing 0x100404)
>pci 0000:00:00.0: Found enabled HT MSI Mapping
>pcieport 0000:00:0c.0: Linking AER extended capability
>pcieport 0000:00:0d.0: restoring config space at offset 0x1 (was 0x100004, writing 0x100404)
>pci 0000:00:00.0: Found enabled HT MSI Mapping
>pcieport 0000:00:0d.0: Linking AER extended capability
>pcieport 0000:00:0e.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
>pci 0000:00:00.0: Found enabled HT MSI Mapping
>pcieport 0000:00:0e.0: Linking AER extended capability
>EMU10K1_Audigy 0000:01:09.0: restoring config space at offset 0x1 (was 0x2900105, writing 0x2900101)
>Emu10k1_gameport 0000:01:09.1: restoring config space at offset 0x1 (was 0x2900105, writing 0x2900101)
>nouveau 0000:05:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
>PM: early resume of devices complete after 10.794 msecs
>ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 20 (level, low) -> IRQ 20
>ohci_hcd 0000:00:02.0: setting latency timer to 64
>ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 21 (level, low) -> IRQ 21
>ehci_hcd 0000:00:02.1: setting latency timer to 64
>pata_amd 0000:00:06.0: setting latency timer to 64
>sata_nv 0000:00:07.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23
>sata_nv 0000:00:07.0: setting latency timer to 64
>pci 0000:00:09.0: setting latency timer to 64
>forcedeth 0000:00:0a.0: wake-up capability disabled by ACPI
>forcedeth 0000:00:0a.0: PME# disabled
>EMU10K1_Audigy 0000:01:09.0: PCI INT A -> Link[LNKD] -> GSI 19 (level, low) -> IRQ 19
>[drm] nouveau 0000:05:00.0: We're back, enabling device...
>nouveau 0000:05:00.0: PCI INT A -> Link[LNKC] -> GSI 18 (level, low) -> IRQ 18
>nouveau 0000:05:00.0: setting latency timer to 64
>[drm] nouveau 0000:05:00.0: POSTing device...
>[drm] nouveau 0000:05:00.0: Parsing VBIOS init table 0 at offset 0xD0BE
>sd 0:0:0:0: [sda] Starting disk
>sd 2:0:0:0: [sdb] Starting disk
>ata4: port disabled. ignoring.
>serial 00:05: activated
>[drm] nouveau 0000:05:00.0: Parsing VBIOS init table 1 at offset 0xD4D3
>[drm] nouveau 0000:05:00.0: Parsing VBIOS init table 2 at offset 0xE4C4
>[drm] nouveau 0000:05:00.0: Parsing VBIOS init table 3 at offset 0xE60D
>[drm] nouveau 0000:05:00.0: Parsing VBIOS init table 4 at offset 0xE849
>[drm] nouveau 0000:05:00.0: Parsing VBIOS init table at offset 0xE8AE
>[drm] nouveau 0000:05:00.0: 0xC090: parsing output script 0
>[drm] nouveau 0000:05:00.0: 0xC090: parsing output script 0
>[drm] nouveau 0000:05:00.0: 0xAB1C: parsing output script 0
>[drm] nouveau 0000:05:00.0: Reinitialising engines...
>[drm] nouveau 0000:05:00.0: Restoring GPU objects...
>[drm] nouveau 0000:05:00.0: Restoring mode...
>[drm] nouveau 0000:05:00.0: 0xC0AE: parsing output script 1
>[drm] nouveau 0000:05:00.0: 0xC0AF: parsing output script 2
>[drm] nouveau 0000:05:00.0: 0xBDA1: parsing clock script 0
>[drm] nouveau 0000:05:00.0: 0xB6D6: parsing clock script 1
>eth0: no link during initialization.
>ata2: SATA link down (SStatus 0 SControl 300)
>eth0: link up.
>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata1.00: ACPI cmd ef/03:46:00:00:00:a0 (SET FEATURES) filtered out
>ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
>ata1.00: configured for UDMA/133
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 12288 bytes
>ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata1.00: failed command: WRITE DMA
>ata1.00: cmd ca/00:18:5b:a8:91/00:00:00:00:00/e0 tag 0 dma 12288 out
>         res 50/00:01:00:00:00/00:00:00:00:00/e0 Emask 0x40 (internal error)
>ata1.00: status: { DRDY }
>ata1.00: configured for UDMA/133
>ata1: EH complete
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 12288 bytes
>ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata1.00: failed command: WRITE DMA
>ata1.00: cmd ca/00:18:5b:a8:91/00:00:00:00:00/e0 tag 0 dma 12288 out
>         res 50/00:00:a1:94:1a/00:00:00:00:00/e0 Emask 0x40 (internal error)
>ata1.00: status: { DRDY }
>ata1.00: configured for UDMA/133
>ata1: EH complete
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 12288 bytes
>ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata1.00: failed command: WRITE DMA
>ata1.00: cmd ca/00:18:5b:a8:91/00:00:00:00:00/e0 tag 0 dma 12288 out
>         res 50/00:00:a1:94:1a/00:00:00:00:00/e0 Emask 0x40 (internal error)
>ata1.00: status: { DRDY }
>ata1.00: configured for UDMA/133
>ata1: EH complete
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 12288 bytes
>ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata1.00: failed command: WRITE DMA
>ata1.00: cmd ca/00:18:5b:a8:91/00:00:00:00:00/e0 tag 0 dma 12288 out
>         res 50/00:00:a1:94:1a/00:00:00:00:00/e0 Emask 0x40 (internal error)
>ata1.00: status: { DRDY }
>ata1.00: configured for UDMA/133
>ata1: EH complete
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 12288 bytes
>ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata1.00: failed command: WRITE DMA
>ata1.00: cmd ca/00:18:5b:a8:91/00:00:00:00:00/e0 tag 0 dma 12288 out
>         res 50/00:00:a1:94:1a/00:00:00:00:00/e0 Emask 0x40 (internal error)
>ata1.00: status: { DRDY }
>ata1.00: configured for UDMA/133
>ata1: EH complete
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 12288 bytes
>ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata1.00: failed command: WRITE DMA
>ata1.00: cmd ca/00:18:5b:a8:91/00:00:00:00:00/e0 tag 0 dma 12288 out
>         res 50/00:00:a1:94:1a/00:00:00:00:00/e0 Emask 0x40 (internal error)
>ata1.00: status: { DRDY }
>ata1.00: configured for UDMA/133
>sd 0:0:0:0: [sda] Result: hostbyte=0x00 driverbyte=0x08
>sd 0:0:0:0: [sda] Sense Key : 0xb [current] [descriptor]
>Descriptor sense data with sense descriptors (in hex):
>        72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 
>        00 1a 94 a1 
>sd 0:0:0:0: [sda] ASC=0x0 ASCQ=0x0
>sd 0:0:0:0: [sda] CDB: cdb[0]=0x2a: 2a 00 00 91 a8 5b 00 00 18 00
>end_request: I/O error, dev sda, sector 9545819
>Aborting journal on device sda3.
>ata1: EH complete
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata1.00: failed command: WRITE DMA
>ata1.00: cmd ca/00:08:3b:97:91/00:00:00:00:00/e0 tag 0 dma 4096 out
>         res 50/00:00:a1:94:1a/00:00:00:00:00/e0 Emask 0x40 (internal error)
>ata1.00: status: { DRDY }
>ata1.00: configured for UDMA/133
>ata1: EH complete
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata1.00: failed command: WRITE DMA
>ata1.00: cmd ca/00:08:3b:97:91/00:00:00:00:00/e0 tag 0 dma 4096 out
>         res 50/00:00:a1:94:1a/00:00:00:00:00/e0 Emask 0x40 (internal error)
>ata1.00: status: { DRDY }
>ata3.01: ACPI cmd ef/03:42:00:00:00:b0 (SET FEATURES) filtered out
>ata3.01: ACPI cmd ef/03:01:00:00:00:b0 (SET FEATURES) filtered out
>ata3.01: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
>ata3.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
>ata3.00: ACPI cmd ef/03:01:00:00:00:a0 (SET FEATURES) filtered out
>ata3.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
>ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
>ata1.00: configured for UDMA/133
>ata1: EH complete
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata1.00: failed command: WRITE DMA
>ata1.00: cmd ca/00:08:3b:97:91/00:00:00:00:00/e0 tag 0 dma 4096 out
>         res 50/00:00:a1:94:1a/00:00:00:00:00/e0 Emask 0x40 (internal error)
>ata1.00: status: { DRDY }
>ata3: nv_mode_filter: 0x3f39f&0x3f39f->0x3f39f, BIOS=0x3f000 (0xc6c00000) ACPI=0x3f01f (20:60:0x15)
>ata3: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc6c00000) ACPI=0x701f (20:60:0x15)
>ata1.00: configured for UDMA/133
>ata1: EH complete
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata1.00: failed command: WRITE DMA
>ata1.00: cmd ca/00:08:3b:97:91/00:00:00:00:00/e0 tag 0 dma 4096 out
>         res 50/00:00:a1:94:1a/00:00:00:00:00/e0 Emask 0x40 (internal error)
>ata1.00: status: { DRDY }
>ata3.00: configured for UDMA/100
>ata1.00: configured for UDMA/133
>ata1: EH complete
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata1.00: failed command: WRITE DMA
>ata1.00: cmd ca/00:08:3b:97:91/00:00:00:00:00/e0 tag 0 dma 4096 out
>         res 50/00:00:a1:94:1a/00:00:00:00:00/e0 Emask 0x40 (internal error)
>ata1.00: status: { DRDY }
>ata3.01: configured for UDMA/33
>ata3: nv_mode_filter: 0x3f39f&0x3f39f->0x3f39f, BIOS=0x3f000 (0xc6c00000) ACPI=0x3f01f (20:60:0x15)
>ata3: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc6c00000) ACPI=0x701f (20:60:0x15)
>ata1.00: configured for UDMA/133
>ata1: EH complete
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes
>ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata1.00: failed command: WRITE DMA
>ata1.00: cmd ca/00:08:3b:97:91/00:00:00:00:00/e0 tag 0 dma 4096 out
>         res 50/00:00:a1:94:1a/00:00:00:00:00/e0 Emask 0x40 (internal error)
>ata1.00: status: { DRDY }
>ata1.00: configured for UDMA/133
>sd 0:0:0:0: [sda] Result: hostbyte=0x00 driverbyte=0x08
>sd 0:0:0:0: [sda] Sense Key : 0xb [current] [descriptor]
>Descriptor sense data with sense descriptors (in hex):
>        72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 
>        00 1a 94 a1 
>sd 0:0:0:0: [sda] ASC=0x0 ASCQ=0x0
>sd 0:0:0:0: [sda] CDB: cdb[0]=0x2a: 2a 00 00 91 97 3b 00 00 08 00
>end_request: I/O error, dev sda, sector 9541435
>Buffer I/O error on device sda3, logical block 688640
>lost page write due to I/O error on sda3
>ata1: EH complete
>ata3.00: configured for UDMA/100
>ata3.01: configured for UDMA/33
>ata3: EH complete
>PM: resume of devices complete after 5117.506 msecs
>Restarting tasks ... 
>EXT3-fs (sda3): error: ext3_journal_start_sb: Detected aborted journal
>EXT3-fs (sda3): error: remounting filesystem read-only
>done.
>SMP alternatives: switching to SMP code
>Booting Node 0 Processor 1 APIC 0x1
>usbcore: registered new interface driver hiddev
>input: Logitech USB Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-1/2-1:1.0/input/input7
>generic-usb 0003:046D:C00C.0007: input: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:02.0-1/input0
>usbcore: registered new interface driver usbhid
>usbhid: USB HID core driver
>i2c i2c-0: nForce2 SMBus adapter at 0x5000
>i2c i2c-1: nForce2 SMBus adapter at 0x6000
>w83627ehf: Found W83627EHG chip at 0xa10
>k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
>------------[ cut here ]------------
>WARNING: at fs/ext3/inode.c:1608 ext3_writeback_writepage+0x4f/0x180()
>Hardware name: MS-7310
>Modules linked in: k8temp w83627ehf i2c_nforce2 usbhid fbcon font bitblit softcursor xt_tcpudp iptable_filter ipt_addrtype xt_dscp xt_string xt_multiport xt_mark xt_hashlimit xt_conntrack xt_connmark xt_NFQUEUE xt_MARK xt_CONNMARK nf_conntrack ip_tables x_tables cpufreq_ondemand nfsd exportfs hwmon_vid ipv6 fuse nls_iso8859_1 nls_cp437 vboxnetadp vboxnetflt vboxdrv powernow_k8 freq_table ohci_hcd nouveau ttm ehci_hcd usbcore drm_kms_helper fb forcedeth emu10k1_gp gameport cfbcopyarea cfbimgblt thermal cfbfillrect processor [last unloaded: i2c_nforce2]
>Pid: 1940, comm: flush-8:0 Not tainted 2.6.34-gentoo-nyx #5
>Call Trace:
> [<ffffffff81030af8>] warn_slowpath_common+0x77/0x8f
> [<ffffffff81030b1f>] warn_slowpath_null+0xf/0x11
> [<ffffffff81112ae2>] ext3_writeback_writepage+0x4f/0x180
> [<ffffffff81076c8e>] __writepage+0x12/0x2b
> [<ffffffff810772e5>] write_cache_pages+0x1f5/0x324
> [<ffffffff81076c7c>] ? __writepage+0x0/0x2b
> [<ffffffff81077433>] generic_writepages+0x1f/0x21
> [<ffffffff81077458>] do_writepages+0x23/0x25
> [<ffffffff810b4d3c>] writeback_single_inode+0xe2/0x2d7
> [<ffffffff810b5a43>] writeback_inodes_wb+0x422/0x529
> [<ffffffff810b5c7e>] wb_writeback+0x134/0x1bb
> [<ffffffff810b5f30>] wb_do_writeback+0x17d/0x193
> [<ffffffff810b5f80>] bdi_writeback_task+0x3a/0xab
> [<ffffffff81081b66>] ? bdi_start_fn+0x0/0xd6
> [<ffffffff81081bd7>] bdi_start_fn+0x71/0xd6
> [<ffffffff81081b66>] ? bdi_start_fn+0x0/0xd6
> [<ffffffff810442f3>] kthread+0x7a/0x82
> [<ffffffff81002c94>] kernel_thread_helper+0x4/0x10
> [<ffffffff81044279>] ? kthread+0x0/0x82
> [<ffffffff81002c90>] ? kernel_thread_helper+0x0/0x10
>---[ end trace b37f94aea63e27c0 ]---

Actions: View

Attachments on bug 25453: 31752 | 36036

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.