Attachment 37360 Details for Bug 26744 – dmesg from resume to black on 25th july 2010

dmesg from resume to black on 25th july 2010

dmesg_20100725 (text/plain), 122.75 KB, created by Tobias Diedrich on 2010-07-25 03:21:19 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Tobias Diedrich

Created: 2010-07-25 03:21:19 UTC

Size: 122.75 KB

patch

obsolete

>t hub lost power or was reset
>[132640.893844] sdhci-pci 0000:04:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>[132640.899091] wlan0: Coming out of suspend...
>[132640.904248] uhci_hcd 0000:00:1d.3: setting latency timer to 64
>[132640.904248] usb usb5: root hub lost power or was reset
>[132640.909444] Intel ICH 0000:00:1e.2: setting latency timer to 64
>[132640.909444] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>[132640.914935] sd 0:0:0:0: [sda] Starting disk
>[132640.920278] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>[132640.925671] sdhci-pci 0000:04:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[132640.931226] tg3 0000:02:00.0: PME# disabled
>[132641.084006] lbam=00 lbah=00
>[132641.091827] ipw2200 0000:04:02.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
>[132641.097367] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[132641.097367] usb usb2: root hub lost power or was reset
>[132641.103144] i915 0000:00:02.0: setting latency timer to 64
>[132641.103144] i915_restore_display(): BLC_PWM_CTL=6c676c66
>[132641.108966] lbam=00 lbah=00
>[132641.126034] i915_restore_display(): BLC_PWM_CTL:6c676c66
>[132641.136014] serial 00:0a: activated
>[132641.145312] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
>[132641.151269] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
>[132641.157169] render error detected, EIR: 0x00000010
>[132641.157169] page table error
>[132641.157169]   PGTBL_ER: 0x00000001
>[132641.157169] [drm:i915_report_and_clear_eir] *ERROR* EIR stuck: 0x00000010, masking
>[132641.157169] render error detected, EIR: 0x00000010
>[132641.157169] page table error
>[132641.157169]   PGTBL_ER: 0x00000001
>[132641.250741] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>[132641.284112] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
>[132641.454739] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[132641.454739] usb usb3: root hub lost power or was reset
>[132641.487063] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[132642.984056] lbam=00 lbah=00
>[132642.989559] lbam=00 lbah=00
>[132643.000590] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[132643.000590] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[132643.006325] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
>[132643.012021] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
>[132643.017822] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
>[132643.040411] ata1.00: configured for UDMA/100
>[132643.068432] ata1.00: configured for UDMA/100
>[132643.074094] ata1: EH complete
>[132643.242814] PM: resume of devices complete after 2423.990 msecs
>[132643.248521] Restarting tasks ... 
>[132643.248521] hub 3-0:1.0: over-current change on port 1
>[132643.304012] done.
>[132643.400013] video LNXVIDEO:00: Restoring backlight state
>[132643.460010] [drm] Manually setting wedged to 0
>[132643.508010] hub 3-0:1.0: over-current change on port 2
>[140387.824007] PM: Syncing filesystems ... done.
>[140388.025737] Freezing user space processes ... (elapsed 0.06 seconds) done.
>[140388.097825] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[140388.117837] PM: Preallocating image memory... done (allocated 254294 pages)
>[140399.794862] PM: Allocated 1017176 kbytes in 11.67 seconds (87.16 MB/s)
>[140399.801202] serial 00:0a: disabled
>[140399.808088] wlan0: Going into suspend...
>[140399.816120] ACPI handle has no context!
>[140399.816120] sdhci-pci 0000:04:00.1: PCI INT B disabled
>[140399.960010] Intel ICH 0000:00:1e.2: PCI INT A disabled
>[140399.968008] ipw2200 0000:04:02.0: PCI INT A disabled
>[140399.977048] i915_save_display(): BLC_PWM_CTL:6c671c66
>[140399.983280] ACPI handle has no context!
>[140399.983280] ACPI handle has no context!
>[140400.012006] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[140400.148006] tg3 0000:02:00.0: PME# enabled
>[140400.148006] pcieport 0000:00:1c.0: wake-up capability enabled by ACPI
>[140400.164006] PM: freeze of devices complete after 363.024 msecs
>[140400.164006] PM: late freeze of devices complete after 0.439 msecs
>[140400.170201] ACPI: Preparing to enter system sleep state S4
>[140400.480006] PM: Saving platform NVS memory
>[140400.488004] Extended CMOS year: 2000
>[140400.488004] PM: Creating hibernation image:
>[140400.488004] PM: Need to copy 127071 pages
>[140400.488004] PM: Restoring platform NVS memory
>[140400.488004] Extended CMOS year: 2000
>[140400.488004] Force enabled HPET at resume
>[140400.488004] ACPI: Waking up from system sleep state S4
>[140401.044009] agpgart-intel 0000:00:00.0: restoring config space at offset 0x1 (was 0x20900106, writing 0x900106)
>[140401.052009] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[140401.064009] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[140401.076009] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[140401.088009] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[140401.100009] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
>[140401.112009] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
>[140401.124008] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
>[140401.136009] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
>[140401.148009] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
>[140401.160009] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
>[140401.165581] ata_piix 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b80001, writing 0x2b80005)
>[140401.165581] tg3 0000:02:00.0: restoring config space at offset 0xc (was 0x0, writing 0xfcbe0000)
>[140401.165581] PM: early restore of devices complete after 122.151 msecs
>[140401.316010] i915 0000:00:02.0: setting latency timer to 64
>[140401.316010] i915_restore_display(): BLC_PWM_CTL=6c671c66
>[140401.325202] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[140401.325202] usb usb2: root hub lost power or was reset
>[140401.330670] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[140401.330670] usb usb3: root hub lost power or was reset
>[140401.336205] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[140401.336205] usb usb4: root hub lost power or was reset
>[140401.341485] uhci_hcd 0000:00:1d.3: setting latency timer to 64
>[140401.341485] usb usb5: root hub lost power or was reset
>[140401.346732] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[140401.346732] pci 0000:00:1e.0: setting latency timer to 64
>[140401.346732] Intel ICH 0000:00:1e.2: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>[140401.352626] ata_piix 0000:00:1f.2: setting latency timer to 64
>[140401.356009] sdhci-pci 0000:04:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>[140401.362173] pcieport 0000:00:1c.0: wake-up capability disabled by ACPI
>[140401.368008] i915_restore_display(): BLC_PWM_CTL:6c671c66
>[140401.376014] wlan0: Coming out of suspend...
>[140401.381083] sd 0:0:0:0: [sda] Starting disk
>[140401.386217] usb usb1: root hub lost power or was reset
>[140401.392008] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
>[140401.392008] tg3 0000:02:00.0: PME# disabled
>[140401.548006] lbam=00 lbah=00
>[140401.556163] lbam=00 lbah=00
>[140401.561192] Intel ICH 0000:00:1e.2: setting latency timer to 64
>[140401.561192] ipw2200 0000:04:02.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
>[140401.566604] sdhci-pci 0000:04:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[140401.572007] lbam=00 lbah=00
>[140401.580008] serial 00:0a: activated
>[140401.592006] lbam=00 lbah=00
>[140401.616009] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[140401.616009] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[140401.624007] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
>[140401.694745] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
>[140401.893118] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
>[140401.978747] usb 1-5: reset high speed USB device using ehci_hcd and address 2
>[140402.024343] ata1.00: configured for UDMA/100
>[140402.048004] ata1.00: configured for UDMA/100
>[140402.048004] ata1: EH complete
>[140402.585595] PM: restore of devices complete after 1273.764 msecs
>[140402.590821] Restarting tasks ... done.
>[140402.640008] video LNXVIDEO:00: Restoring backlight state
>[140403.284002] IBM TrackPoint firmware: 0x0e, buttons: 3/3
>[140403.300018] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input7
>[143282.944010] PM: Syncing filesystems ... done.
>[143283.028007] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[143283.049404] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[143283.089033] serial 00:0a: disabled
>[143283.094255] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[143283.100008] wlan0: Going into suspend...
>[143283.105418] ACPI handle has no context!
>[143283.105418] sdhci-pci 0000:04:00.1: PCI INT B disabled
>[143283.248005] Intel ICH 0000:00:1e.2: PCI INT A disabled
>[143283.257141] ACPI handle has no context!
>[143283.257141] ipw2200 0000:04:02.0: PCI INT A disabled
>[143283.265043] i915_save_display(): BLC_PWM_CTL:6c676c66
>[143283.270263] ACPI handle has no context!
>[143283.284006] i915 0000:00:02.0: power state changed by ACPI to D3
>[143283.333300] sd 0:0:0:0: [sda] Stopping disk
>[143283.440009] tg3 0000:02:00.0: PME# enabled
>[143283.440009] pcieport 0000:00:1c.0: wake-up capability enabled by ACPI
>[143283.992011] PM: suspend of devices complete after 922.460 msecs
>[143284.060008] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3
>[143284.112009] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D3
>[143284.284009] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D3
>[143284.327573] PM: late suspend of devices complete after 291.797 msecs
>[143284.408009] ACPI: Preparing to enter system sleep state S3
>[143284.776008] Extended CMOS year: 2000
>[143284.776008] Back to C!
>[143284.776008] Extended CMOS year: 2000
>[143284.776008] Force enabled HPET at resume
>[143284.819162] ACPI: Waking up from system sleep state S3
>[143285.336008] agpgart-intel 0000:00:00.0: restoring config space at offset 0x1 (was 0x900106, writing 0x20900106)
>[143285.336008] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900003, writing 0x900007)
>[143285.336008] pci 0000:00:02.1: restoring config space at offset 0x4 (was 0x0, writing 0x60200000)
>[143285.336008] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x1fff1, writing 0x60116001)
>[143285.336008] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0xf0, writing 0x7070)
>[143285.336008] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
>[143285.380008] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[143285.392008] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[143285.397204] uhci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
>[143285.397204] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x8 (was 0x1, writing 0x1821)
>[143285.397204] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800005)
>[143285.404008] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[143285.416008] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[143285.428008] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
>[143285.440008] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
>[143285.445024] uhci_hcd 0000:00:1d.1: restoring config space at offset 0xf (was 0x200, writing 0x20b)
>[143285.445024] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x8 (was 0x1, writing 0x1841)
>[143285.445024] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800005)
>[143285.452008] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
>[143285.464008] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
>[143285.468866] uhci_hcd 0000:00:1d.2: restoring config space at offset 0xf (was 0x300, writing 0x30b)
>[143285.468866] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x8 (was 0x1, writing 0x1861)
>[143285.468866] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800005)
>[143285.468866] uhci_hcd 0000:00:1d.3: restoring config space at offset 0xf (was 0x400, writing 0x40b)
>[143285.468866] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x8 (was 0x1, writing 0x1881)
>[143285.468866] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800005)
>[143285.468866] ehci_hcd 0000:00:1d.7: restoring config space at offset 0xf (was 0x400, writing 0x40b)
>[143285.468866] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x4 (was 0x0, writing 0xa0040000)
>[143285.468866] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900106)
>[143285.476008] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
>[143285.488008] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
>[143285.492874] Intel ICH 0000:00:1e.2: restoring config space at offset 0x1 (was 0x2900007, writing 0x2900003)
>[143285.492874] pci 0000:00:1e.3: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
>[143285.492874] tg3 0000:02:00.0: restoring config space at offset 0xc (was 0x0, writing 0xfc9e0000)
>[143285.492874] tg3 0000:02:00.0: restoring config space at offset 0x1 (was 0x100102, writing 0x100106)
>[143285.508010] sdhci-pci 0000:04:00.1: BAR 0: set to [mem 0xa0201000-0xa02010ff] (PCI address [0xa0201000-0xa02010ff]
>[143285.512999] sdhci-pci 0000:04:00.1: restoring config space at offset 0x3 (was 0x800000, writing 0x804000)
>[143285.512999] sdhci-pci 0000:04:00.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106)
>[143285.512999] PM: early resume of devices complete after 177.046 msecs
>[143285.520008] i915 0000:00:02.0: setting latency timer to 64
>[143285.520008] i915_restore_display(): BLC_PWM_CTL=6c676c66
>[143285.525229] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[143285.525229] usb usb2: root hub lost power or was reset
>[143285.536008] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[143285.536008] usb usb3: root hub lost power or was reset
>[143285.541393] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[143285.541393] usb usb4: root hub lost power or was reset
>[143285.546751] i915_restore_display(): BLC_PWM_CTL:6c676c66
>[143285.552047] uhci_hcd 0000:00:1d.3: setting latency timer to 64
>[143285.552047] usb usb5: root hub lost power or was reset
>[143285.560271] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[143285.560271] pci 0000:00:1e.0: setting latency timer to 64
>[143285.560271] Intel ICH 0000:00:1e.2: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>[143285.566068] ata_piix 0000:00:1f.2: setting latency timer to 64
>[143285.572008] pcieport 0000:00:1c.0: wake-up capability disabled by ACPI
>[143285.577442] sdhci-pci 0000:04:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>[143285.584008] wlan0: Coming out of suspend...
>[143285.590139] sd 0:0:0:0: [sda] Starting disk
>[143285.596006] render error detected, EIR: 0x00000010
>[143285.596006] page table error
>[143285.596006]   PGTBL_ER: 0x00000001
>[143285.596006] [drm:i915_report_and_clear_eir] *ERROR* EIR stuck: 0x00000010, masking
>[143285.596006] render error detected, EIR: 0x00000010
>[143285.596006] page table error
>[143285.596006]   PGTBL_ER: 0x00000001
>[143285.636050] Intel ICH 0000:00:1e.2: setting latency timer to 64
>[143285.636050] tg3 0000:02:00.0: PME# disabled
>[143285.792027] sdhci-pci 0000:04:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[143285.797712] lbam=00 lbah=00
>[143285.803378] ipw2200 0000:04:02.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
>[143285.812009] serial 00:0a: activated
>[143285.818707] lbam=00 lbah=00
>[143287.632031] lbam=00 lbah=00
>[143287.637505] lbam=00 lbah=00
>[143287.648658] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[143287.648658] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[143287.654219] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
>[143287.659745] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
>[143287.665422] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
>[143287.688490] ata1.00: configured for UDMA/100
>[143287.716492] ata1.00: configured for UDMA/100
>[143287.721898] ata1: EH complete
>[143287.886364] PM: resume of devices complete after 2368.013 msecs
>[143287.892007] Restarting tasks ... 
>[143287.892007] hub 1-0:1.0: over-current change on port 3
>[143287.968011] done.
>[143288.004010] video LNXVIDEO:00: Restoring backlight state
>[143288.032010] [drm] Manually setting wedged to 0
>[143288.096008] hub 1-0:1.0: over-current change on port 4
>[143288.200009] hub 3-0:1.0: over-current change on port 1
>[143288.304009] hub 3-0:1.0: over-current change on port 2
>[152819.256509] tg3 0000:02:00.0: lan0: Link is up at 100 Mbps, full duplex
>[152819.256509] tg3 0000:02:00.0: lan0: Flow control is on for TX and on for RX
>[152819.256509] ADDRCONF(NETDEV_CHANGE): lan0: link becomes ready
>[152830.080005] lan0: no IPv6 routers present
>[152852.754713] tg3 0000:02:00.0: lan0: Link is down
>[152863.380138] tg3 0000:02:00.0: PME# enabled
>[152863.380138] pcieport 0000:00:1c.0: wake-up capability enabled by ACPI
>[152863.544011] pcieport 0000:00:1c.0: wake-up capability disabled by ACPI
>[152863.544011] tg3 0000:02:00.0: PME# disabled
>[152863.560158] tg3 0000:02:00.0: BAR 0: set to [mem 0xa0100000-0xa010ffff 64bit] (PCI address [0xa0100000-0xa010ffff]
>[152863.712006] ADDRCONF(NETDEV_UP): lan0: link is not ready
>[152865.528010] PM: Syncing filesystems ... done.
>[152865.632006] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[152865.648157] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[152865.684901] serial 00:0a: disabled
>[152865.685585] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[152865.688396] wlan0: Going into suspend...
>[152865.688396] ACPI handle has no context!
>[152865.688396] sdhci-pci 0000:04:00.1: PCI INT B disabled
>[152865.832003] ipw2200 0000:04:02.0: PCI INT A disabled
>[152865.836221] ACPI handle has no context!
>[152865.836221] Intel ICH 0000:00:1e.2: PCI INT A disabled
>[152865.836221] ACPI handle has no context!
>[152865.836221] i915_save_display(): BLC_PWM_CTL:6c676c66
>[152865.856007] i915 0000:00:02.0: power state changed by ACPI to D3
>[152865.942646] sd 0:0:0:0: [sda] Stopping disk
>[152866.024007] tg3 0000:02:00.0: PME# enabled
>[152866.024007] pcieport 0000:00:1c.0: wake-up capability enabled by ACPI
>[152866.596402] PM: suspend of devices complete after 929.779 msecs
>[152866.664008] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3
>[152866.716009] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D3
>[152866.892008] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D3
>[152866.937707] PM: late suspend of devices complete after 296.011 msecs
>[152867.024009] ACPI: Preparing to enter system sleep state S3
>[152867.396008] Extended CMOS year: 2000
>[152867.396008] Back to C!
>[152867.396008] Extended CMOS year: 2000
>[152867.396008] Force enabled HPET at resume
>[152867.442236] ACPI: Waking up from system sleep state S3
>[152868.060008] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900003, writing 0x900007)
>[152868.060008] pci 0000:00:02.1: restoring config space at offset 0x4 (was 0x0, writing 0x60200000)
>[152868.060008] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x1fff1, writing 0x60116001)
>[152868.060008] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0xf0, writing 0x7070)
>[152868.060008] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
>[152868.104008] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[152868.116008] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[152868.121683] uhci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
>[152868.121683] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x8 (was 0x1, writing 0x1821)
>[152868.121683] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800005)
>[152868.128008] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[152868.140009] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[152868.152008] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
>[152868.164008] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
>[152868.169685] uhci_hcd 0000:00:1d.1: restoring config space at offset 0xf (was 0x200, writing 0x20b)
>[152868.169685] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x8 (was 0x1, writing 0x1841)
>[152868.169685] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800005)
>[152868.176009] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
>[152868.188008] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
>[152868.193692] uhci_hcd 0000:00:1d.2: restoring config space at offset 0xf (was 0x300, writing 0x30b)
>[152868.193692] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x8 (was 0x1, writing 0x1861)
>[152868.193692] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800005)
>[152868.193692] uhci_hcd 0000:00:1d.3: restoring config space at offset 0xf (was 0x400, writing 0x40b)
>[152868.193692] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x8 (was 0x1, writing 0x1881)
>[152868.193692] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800005)
>[152868.193692] ehci_hcd 0000:00:1d.7: restoring config space at offset 0xf (was 0x400, writing 0x40b)
>[152868.193692] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x4 (was 0x0, writing 0xa0040000)
>[152868.193692] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900106)
>[152868.200009] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
>[152868.212008] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
>[152868.217539] Intel ICH 0000:00:1e.2: restoring config space at offset 0x1 (was 0x2900007, writing 0x2900003)
>[152868.217539] pci 0000:00:1e.3: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
>[152868.217539] tg3 0000:02:00.0: restoring config space at offset 0xc (was 0x0, writing 0xfc9e0000)
>[152868.217539] tg3 0000:02:00.0: restoring config space at offset 0x1 (was 0x100102, writing 0x100106)
>[152868.232010] sdhci-pci 0000:04:00.1: BAR 0: set to [mem 0xa0201000-0xa02010ff] (PCI address [0xa0201000-0xa02010ff]
>[152868.237482] sdhci-pci 0000:04:00.1: restoring config space at offset 0x3 (was 0x800000, writing 0x804000)
>[152868.237482] sdhci-pci 0000:04:00.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106)
>[152868.237482] PM: early resume of devices complete after 177.530 msecs
>[152868.248269] i915 0000:00:02.0: setting latency timer to 64
>[152868.248269] i915_restore_display(): BLC_PWM_CTL=00000000
>[152868.253773] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[152868.253773] usb usb2: root hub lost power or was reset
>[152868.259416] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[152868.259416] usb usb3: root hub lost power or was reset
>[152868.265367] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[152868.265367] usb usb4: root hub lost power or was reset
>[152868.272006] uhci_hcd 0000:00:1d.3: setting latency timer to 64
>[152868.272006] usb usb5: root hub lost power or was reset
>[152868.278253] i915_restore_display(): BLC_PWM_CTL:00000000
>[152868.283583] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[152868.283583] pci 0000:00:1e.0: setting latency timer to 64
>[152868.283583] Intel ICH 0000:00:1e.2: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>[152868.289050] ata_piix 0000:00:1f.2: setting latency timer to 64
>[152868.292009] pcieport 0000:00:1c.0: wake-up capability disabled by ACPI
>[152868.300008] sdhci-pci 0000:04:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>[152868.306788] wlan0: Coming out of suspend...
>[152868.312170] sd 0:0:0:0: [sda] Starting disk
>[152868.317564] Intel ICH 0000:00:1e.2: setting latency timer to 64
>[152868.317564] tg3 0000:02:00.0: PME# disabled
>[152868.472007] lbam=00 lbah=00
>[152868.478310] render error detected, EIR: 0x00000010
>[152868.478310] page table error
>[152868.478310]   PGTBL_ER: 0x00000001
>[152868.478310] [drm:i915_report_and_clear_eir] *ERROR* EIR stuck: 0x00000010, masking
>[152868.478310] render error detected, EIR: 0x00000010
>[152868.478310] page table error
>[152868.478310]   PGTBL_ER: 0x00000001
>[152868.516008] sdhci-pci 0000:04:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[152868.521551] ipw2200 0000:04:02.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
>[152868.526912] lbam=00 lbah=00
>[152868.564007] serial 00:0a: activated
>[152870.260017] lbam=00 lbah=00
>[152870.265423] lbam=00 lbah=00
>[152870.276784] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[152870.276784] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[152870.282246] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
>[152870.287733] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
>[152870.293414] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
>[152870.316639] ata1.00: configured for UDMA/100
>[152870.344650] ata1.00: configured for UDMA/100
>[152870.350101] ata1: EH complete
>[152870.514329] PM: resume of devices complete after 2271.045 msecs
>[152870.519776] Restarting tasks ... 
>[152870.520008] hub 3-0:1.0: over-current change on port 1
>[152870.556009] done.
>[152870.584009] video LNXVIDEO:00: Restoring backlight state
>[152870.688660] hub 3-0:1.0: over-current change on port 2
>[152870.812007] [drm] Manually setting wedged to 0
>[153387.220072] tg3 0000:02:00.0: lan0: Link is up at 1000 Mbps, full duplex
>[153387.220072] tg3 0000:02:00.0: lan0: Flow control is on for TX and on for RX
>[153387.220072] ADDRCONF(NETDEV_CHANGE): lan0: link becomes ready
>[153398.177568] lan0: no IPv6 routers present
>[153400.567636] tg3 0000:02:00.0: lan0: Link is down
>[153414.488010] PM: Syncing filesystems ... done.
>[153414.568007] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[153414.584018] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[153414.620776] serial 00:0a: disabled
>[153414.622308] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[153414.625914] wlan0: Going into suspend...
>[153414.629037] ACPI handle has no context!
>[153414.629037] sdhci-pci 0000:04:00.1: PCI INT B disabled
>[153414.772009] ipw2200 0000:04:02.0: PCI INT A disabled
>[153414.778261] Intel ICH 0000:00:1e.2: PCI INT A disabled
>[153414.781563] ACPI handle has no context!
>[153414.781563] i915_save_display(): BLC_PWM_CTL:6c676c66
>[153414.784919] ACPI handle has no context!
>[153414.800008] i915 0000:00:02.0: power state changed by ACPI to D3
>[153414.876004] sd 0:0:0:0: [sda] Stopping disk
>[153414.964007] tg3 0000:02:00.0: PME# enabled
>[153414.964007] pcieport 0000:00:1c.0: wake-up capability enabled by ACPI
>[153415.540010] PM: suspend of devices complete after 936.662 msecs
>[153415.608008] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3
>[153415.660009] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D3
>[153415.832009] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D3
>[153415.877040] PM: late suspend of devices complete after 291.528 msecs
>[153415.960008] ACPI: Preparing to enter system sleep state S3
>[153416.332008] Extended CMOS year: 2000
>[153416.332008] Back to C!
>[153416.332008] Extended CMOS year: 2000
>[153416.332008] Force enabled HPET at resume
>[153416.377736] ACPI: Waking up from system sleep state S3
>[153416.996008] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900003, writing 0x900007)
>[153416.996008] pci 0000:00:02.1: restoring config space at offset 0x4 (was 0x0, writing 0x60200000)
>[153416.996008] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x1fff1, writing 0x60116001)
>[153416.996008] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0xf0, writing 0x7070)
>[153416.996008] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
>[153417.040008] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[153417.052009] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[153417.057691] uhci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
>[153417.057691] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x8 (was 0x1, writing 0x1821)
>[153417.057691] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800005)
>[153417.064009] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[153417.076008] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[153417.088009] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
>[153417.100009] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
>[153417.105687] uhci_hcd 0000:00:1d.1: restoring config space at offset 0xf (was 0x200, writing 0x20b)
>[153417.105687] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x8 (was 0x1, writing 0x1841)
>[153417.105687] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800005)
>[153417.112009] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
>[153417.124009] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
>[153417.129681] uhci_hcd 0000:00:1d.2: restoring config space at offset 0xf (was 0x300, writing 0x30b)
>[153417.129681] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x8 (was 0x1, writing 0x1861)
>[153417.129681] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800005)
>[153417.129681] uhci_hcd 0000:00:1d.3: restoring config space at offset 0xf (was 0x400, writing 0x40b)
>[153417.129681] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x8 (was 0x1, writing 0x1881)
>[153417.129681] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800005)
>[153417.129681] ehci_hcd 0000:00:1d.7: restoring config space at offset 0xf (was 0x400, writing 0x40b)
>[153417.129681] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x4 (was 0x0, writing 0xa0040000)
>[153417.129681] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900106)
>[153417.136008] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
>[153417.148009] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
>[153417.153358] Intel ICH 0000:00:1e.2: restoring config space at offset 0x1 (was 0x2900007, writing 0x2900003)
>[153417.153358] pci 0000:00:1e.3: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
>[153417.153358] tg3 0000:02:00.0: restoring config space at offset 0xc (was 0x0, writing 0xfc9e0000)
>[153417.153358] tg3 0000:02:00.0: restoring config space at offset 0x1 (was 0x100102, writing 0x100106)
>[153417.168010] sdhci-pci 0000:04:00.1: BAR 0: set to [mem 0xa0201000-0xa02010ff] (PCI address [0xa0201000-0xa02010ff]
>[153417.173373] sdhci-pci 0000:04:00.1: restoring config space at offset 0x3 (was 0x800000, writing 0x804000)
>[153417.173373] sdhci-pci 0000:04:00.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106)
>[153417.173373] PM: early resume of devices complete after 177.426 msecs
>[153417.184008] i915 0000:00:02.0: setting latency timer to 64
>[153417.184008] i915_restore_display(): BLC_PWM_CTL=6c676c66
>[153417.189449] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[153417.189449] usb usb2: root hub lost power or was reset
>[153417.195142] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[153417.195142] usb usb3: root hub lost power or was reset
>[153417.201344] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[153417.201344] usb usb4: root hub lost power or was reset
>[153417.208006] uhci_hcd 0000:00:1d.3: setting latency timer to 64
>[153417.208006] usb usb5: root hub lost power or was reset
>[153417.217321] i915_restore_display(): BLC_PWM_CTL:6c676c66
>[153417.222648] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[153417.222648] pci 0000:00:1e.0: setting latency timer to 64
>[153417.222648] Intel ICH 0000:00:1e.2: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>[153417.228269] ata_piix 0000:00:1f.2: setting latency timer to 64
>[153417.232009] sdhci-pci 0000:04:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>[153417.237868] pcieport 0000:00:1c.0: wake-up capability disabled by ACPI
>[153417.244008] wlan0: Coming out of suspend...
>[153417.251844] sd 0:0:0:0: [sda] Starting disk
>[153417.257238] render error detected, EIR: 0x00000010
>[153417.257238] page table error
>[153417.257238]   PGTBL_ER: 0x00000001
>[153417.257238] [drm:i915_report_and_clear_eir] *ERROR* EIR stuck: 0x00000010, masking
>[153417.257238] render error detected, EIR: 0x00000010
>[153417.257238] page table error
>[153417.257238]   PGTBL_ER: 0x00000001
>[153417.296489] Intel ICH 0000:00:1e.2: setting latency timer to 64
>[153417.296489] sdhci-pci 0000:04:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[153417.301970] tg3 0000:02:00.0: PME# disabled
>[153417.456006] lbam=00 lbah=00
>[153417.462385] lbam=00 lbah=00
>[153417.468006] ipw2200 0000:04:02.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
>[153417.476009] serial 00:0a: activated
>[153419.232156] lbam=00 lbah=00
>[153419.237439] lbam=00 lbah=00
>[153419.248802] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[153419.248802] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[153419.254258] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
>[153419.259649] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
>[153419.265314] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
>[153419.288635] ata1.00: configured for UDMA/100
>[153419.316629] ata1.00: configured for UDMA/100
>[153419.321992] ata1: EH complete
>[153419.490910] PM: resume of devices complete after 2311.954 msecs
>[153419.496372] Restarting tasks ... 
>[153419.496372] hub 3-0:1.0: over-current change on port 1
>[153419.524010] done.
>[153419.556011] video LNXVIDEO:00: Restoring backlight state
>[153419.592009] [drm] Manually setting wedged to 0
>[153419.672009] hub 3-0:1.0: over-current change on port 2
>[153420.128004] tg3 0000:02:00.0: PME# enabled
>[153420.128004] pcieport 0000:00:1c.0: wake-up capability enabled by ACPI
>[153420.224006] pcieport 0000:00:1c.0: wake-up capability disabled by ACPI
>[153420.224006] tg3 0000:02:00.0: PME# disabled
>[153420.240004] tg3 0000:02:00.0: BAR 0: set to [mem 0xa0100000-0xa010ffff 64bit] (PCI address [0xa0100000-0xa010ffff]
>[153420.544005] ADDRCONF(NETDEV_UP): lan0: link is not ready
>[154117.516009] PM: Syncing filesystems ... done.
>[154117.584009] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[154117.600152] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[154117.634120] serial 00:0a: disabled
>[154117.636007] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[154117.636007] wlan0: Going into suspend...
>[154117.641155] sd 0:0:0:0: [sda] Stopping disk
>[154117.780004] ACPI handle has no context!
>[154117.780004] sdhci-pci 0000:04:00.1: PCI INT B disabled
>[154117.786218] Intel ICH 0000:00:1e.2: PCI INT A disabled
>[154117.788867] i915_save_display(): BLC_PWM_CTL:6c676c66
>[154117.793726] ipw2200 0000:04:02.0: PCI INT A disabled
>[154117.796085] ACPI handle has no context!
>[154117.796085] ACPI handle has no context!
>[154117.812006] i915 0000:00:02.0: power state changed by ACPI to D3
>[154117.972006] tg3 0000:02:00.0: PME# enabled
>[154117.972006] pcieport 0000:00:1c.0: wake-up capability enabled by ACPI
>[154118.168009] PM: suspend of devices complete after 549.570 msecs
>[154118.232007] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3
>[154118.284007] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D3
>[154118.456007] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D3
>[154118.499332] PM: late suspend of devices complete after 288.244 msecs
>[154118.580008] ACPI: Preparing to enter system sleep state S3
>[154118.968008] Extended CMOS year: 2000
>[154118.968008] Back to C!
>[154118.968008] Extended CMOS year: 2000
>[154118.968008] Force enabled HPET at resume
>[154119.012066] ACPI: Waking up from system sleep state S3
>[154119.632009] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900003, writing 0x900007)
>[154119.632009] pci 0000:00:02.1: restoring config space at offset 0x4 (was 0x0, writing 0x60200000)
>[154119.632009] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x1fff1, writing 0x60116001)
>[154119.632009] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0xf0, writing 0x7070)
>[154119.632009] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
>[154119.676008] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[154119.688008] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[154119.693435] uhci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
>[154119.693435] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x8 (was 0x1, writing 0x1821)
>[154119.693435] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800005)
>[154119.700008] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[154119.712008] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[154119.724008] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
>[154119.736008] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
>[154119.741423] uhci_hcd 0000:00:1d.1: restoring config space at offset 0xf (was 0x200, writing 0x20b)
>[154119.741423] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x8 (was 0x1, writing 0x1841)
>[154119.741423] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800005)
>[154119.748009] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
>[154119.760008] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
>[154119.765430] uhci_hcd 0000:00:1d.2: restoring config space at offset 0xf (was 0x300, writing 0x30b)
>[154119.765430] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x8 (was 0x1, writing 0x1861)
>[154119.765430] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800005)
>[154119.765430] uhci_hcd 0000:00:1d.3: restoring config space at offset 0xf (was 0x400, writing 0x40b)
>[154119.765430] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x8 (was 0x1, writing 0x1881)
>[154119.765430] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800005)
>[154119.765430] ehci_hcd 0000:00:1d.7: restoring config space at offset 0xf (was 0x400, writing 0x40b)
>[154119.765430] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x4 (was 0x0, writing 0xa0040000)
>[154119.765430] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900106)
>[154119.772008] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
>[154119.784008] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
>[154119.789268] Intel ICH 0000:00:1e.2: restoring config space at offset 0x1 (was 0x2900007, writing 0x2900003)
>[154119.789268] pci 0000:00:1e.3: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
>[154119.789268] tg3 0000:02:00.0: restoring config space at offset 0xc (was 0x0, writing 0xfc9e0000)
>[154119.789268] tg3 0000:02:00.0: restoring config space at offset 0x1 (was 0x100102, writing 0x100106)
>[154119.804010] sdhci-pci 0000:04:00.1: BAR 0: set to [mem 0xa0201000-0xa02010ff] (PCI address [0xa0201000-0xa02010ff]
>[154119.809215] sdhci-pci 0000:04:00.1: restoring config space at offset 0x3 (was 0x800000, writing 0x804000)
>[154119.809215] sdhci-pci 0000:04:00.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106)
>[154119.809215] PM: early resume of devices complete after 177.265 msecs
>[154119.820017] i915 0000:00:02.0: setting latency timer to 64
>[154119.820017] i915_restore_display(): BLC_PWM_CTL=00000000
>[154119.825440] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[154119.825440] usb usb2: root hub lost power or was reset
>[154119.831157] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[154119.831157] usb usb3: root hub lost power or was reset
>[154119.836485] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[154119.836485] usb usb4: root hub lost power or was reset
>[154119.841825] uhci_hcd 0000:00:1d.3: setting latency timer to 64
>[154119.841825] usb usb5: root hub lost power or was reset
>[154119.848491] i915_restore_display(): BLC_PWM_CTL:00000000
>[154119.853616] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[154119.853616] pci 0000:00:1e.0: setting latency timer to 64
>[154119.853616] Intel ICH 0000:00:1e.2: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>[154119.858973] ata_piix 0000:00:1f.2: setting latency timer to 64
>[154119.864009] sdhci-pci 0000:04:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>[154119.869438] pcieport 0000:00:1c.0: wake-up capability disabled by ACPI
>[154119.876008] wlan0: Coming out of suspend...
>[154119.881519] sd 0:0:0:0: [sda] Starting disk
>[154119.886686] Intel ICH 0000:00:1e.2: setting latency timer to 64
>[154119.886686] sdhci-pci 0000:04:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[154119.892394] render error detected, EIR: 0x00000010
>[154119.892394] page table error
>[154119.892394]   PGTBL_ER: 0x00000001
>[154119.892394] [drm:i915_report_and_clear_eir] *ERROR* EIR stuck: 0x00000010, masking
>[154119.892394] render error detected, EIR: 0x00000010
>[154119.892394] page table error
>[154119.892394]   PGTBL_ER: 0x00000001
>[154119.929659] tg3 0000:02:00.0: PME# disabled
>[154120.084006] lbam=00 lbah=00
>[154120.090889] ipw2200 0000:04:02.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
>[154120.096677] lbam=00 lbah=00
>[154120.132007] serial 00:0a: activated
>[154121.860158] lbam=00 lbah=00
>[154121.865398] lbam=00 lbah=00
>[154121.876777] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[154121.876777] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[154121.882073] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
>[154121.887395] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
>[154121.892911] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
>[154121.916486] ata1.00: configured for UDMA/100
>[154121.944635] ata1.00: configured for UDMA/100
>[154121.949923] ata1: EH complete
>[154122.110283] PM: resume of devices complete after 2295.537 msecs
>[154122.115567] Restarting tasks ... 
>[154122.115567] hub 3-0:1.0: over-current change on port 1
>[154122.160011] done.
>[154122.236009] video LNXVIDEO:00: Restoring backlight state
>[154122.284009] [drm] Manually setting wedged to 0
>[154122.340010] hub 3-0:1.0: over-current change on port 2
>[155711.616009] PM: Syncing filesystems ... done.
>[155711.732007] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[155711.748159] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[155711.788493] serial 00:0a: disabled
>[155711.792007] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[155711.792007] wlan0: Going into suspend...
>[155711.798856] sd 0:0:0:0: [sda] Stopping disk
>[155711.802127] ACPI handle has no context!
>[155711.802127] sdhci-pci 0000:04:00.1: PCI INT B disabled
>[155711.944011] Intel ICH 0000:00:1e.2: PCI INT A disabled
>[155711.949416] ACPI handle has no context!
>[155711.952007] ipw2200 0000:04:02.0: PCI INT A disabled
>[155711.952007] ACPI handle has no context!
>[155711.952007] i915_save_display(): BLC_PWM_CTL:6c676c66
>[155711.972005] i915 0000:00:02.0: power state changed by ACPI to D3
>[155712.136008] tg3 0000:02:00.0: PME# enabled
>[155712.136008] pcieport 0000:00:1c.0: wake-up capability enabled by ACPI
>[155712.468010] PM: suspend of devices complete after 700.516 msecs
>[155712.540008] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3
>[155712.604008] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D3
>[155712.776009] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D3
>[155712.819736] PM: late suspend of devices complete after 308.074 msecs
>[155712.904008] ACPI: Preparing to enter system sleep state S3
>[155713.276008] Extended CMOS year: 2000
>[155713.276008] Back to C!
>[155713.276008] Extended CMOS year: 2000
>[155713.276008] Force enabled HPET at resume
>[155713.320338] ACPI: Waking up from system sleep state S3
>[155713.940008] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900003, writing 0x900007)
>[155713.940008] pci 0000:00:02.1: restoring config space at offset 0x4 (was 0x0, writing 0x60200000)
>[155713.940008] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x1fff1, writing 0x60116001)
>[155713.940008] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0xf0, writing 0x7070)
>[155713.940008] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
>[155713.984008] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[155713.996009] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[155714.001455] uhci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
>[155714.001455] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x8 (was 0x1, writing 0x1821)
>[155714.001455] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800005)
>[155714.008009] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[155714.020010] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[155714.032008] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
>[155714.044009] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
>[155714.049469] uhci_hcd 0000:00:1d.1: restoring config space at offset 0xf (was 0x200, writing 0x20b)
>[155714.049469] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x8 (was 0x1, writing 0x1841)
>[155714.049469] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800005)
>[155714.056009] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
>[155714.068009] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
>[155714.073467] uhci_hcd 0000:00:1d.2: restoring config space at offset 0xf (was 0x300, writing 0x30b)
>[155714.073467] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x8 (was 0x1, writing 0x1861)
>[155714.073467] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800005)
>[155714.073467] uhci_hcd 0000:00:1d.3: restoring config space at offset 0xf (was 0x400, writing 0x40b)
>[155714.073467] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x8 (was 0x1, writing 0x1881)
>[155714.073467] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800005)
>[155714.073467] ehci_hcd 0000:00:1d.7: restoring config space at offset 0xf (was 0x400, writing 0x40b)
>[155714.073467] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x4 (was 0x0, writing 0xa0040000)
>[155714.073467] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900106)
>[155714.080009] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
>[155714.092009] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
>[155714.097304] Intel ICH 0000:00:1e.2: restoring config space at offset 0x1 (was 0x2900007, writing 0x2900003)
>[155714.097304] pci 0000:00:1e.3: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
>[155714.097304] tg3 0000:02:00.0: restoring config space at offset 0xc (was 0x0, writing 0xfc9e0000)
>[155714.097304] tg3 0000:02:00.0: restoring config space at offset 0x1 (was 0x100102, writing 0x100106)
>[155714.112011] sdhci-pci 0000:04:00.1: BAR 0: set to [mem 0xa0201000-0xa02010ff] (PCI address [0xa0201000-0xa02010ff]
>[155714.117250] sdhci-pci 0000:04:00.1: restoring config space at offset 0x3 (was 0x800000, writing 0x804000)
>[155714.117250] sdhci-pci 0000:04:00.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106)
>[155714.117250] PM: early resume of devices complete after 177.319 msecs
>[155714.128018] i915 0000:00:02.0: setting latency timer to 64
>[155714.128018] i915_restore_display(): BLC_PWM_CTL=00000000
>[155714.133642] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[155714.133642] usb usb2: root hub lost power or was reset
>[155714.139367] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[155714.139367] usb usb3: root hub lost power or was reset
>[155714.144737] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[155714.144737] usb usb4: root hub lost power or was reset
>[155714.150117] uhci_hcd 0000:00:1d.3: setting latency timer to 64
>[155714.150117] usb usb5: root hub lost power or was reset
>[155714.156007] i915_restore_display(): BLC_PWM_CTL:00000000
>[155714.162002] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[155714.162002] pci 0000:00:1e.0: setting latency timer to 64
>[155714.162002] Intel ICH 0000:00:1e.2: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>[155714.167397] ata_piix 0000:00:1f.2: setting latency timer to 64
>[155714.172009] pcieport 0000:00:1c.0: wake-up capability disabled by ACPI
>[155714.177291] sdhci-pci 0000:04:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>[155714.184008] wlan0: Coming out of suspend...
>[155714.190193] sd 0:0:0:0: [sda] Starting disk
>[155714.195453] Intel ICH 0000:00:1e.2: setting latency timer to 64
>[155714.195453] tg3 0000:02:00.0: PME# disabled
>[155714.348006] lbam=00 lbah=00
>[155714.356071] render error detected, EIR: 0x00000010
>[155714.356071] page table error
>[155714.356071]   PGTBL_ER: 0x00000001
>[155714.356071] [drm:i915_report_and_clear_eir] *ERROR* EIR stuck: 0x00000010, masking
>[155714.356071] render error detected, EIR: 0x00000010
>[155714.356071] page table error
>[155714.356071]   PGTBL_ER: 0x00000001
>[155714.392014] sdhci-pci 0000:04:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[155714.397623] ipw2200 0000:04:02.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
>[155714.404011] lbam=00 lbah=00
>[155714.440008] serial 00:0a: activated
>[155716.164159] lbam=00 lbah=00
>[155716.169461] lbam=00 lbah=00
>[155716.180824] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[155716.180824] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[155716.186182] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
>[155716.191564] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
>[155716.197138] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
>[155716.220653] ata1.00: configured for UDMA/100
>[155716.248659] ata1.00: configured for UDMA/100
>[155716.254005] ata1: EH complete
>[155716.410497] PM: resume of devices complete after 2287.656 msecs
>[155716.415845] Restarting tasks ... 
>[155716.416066] hub 3-0:1.0: over-current change on port 1
>[155716.444011] done.
>[155716.540009] video LNXVIDEO:00: Restoring backlight state
>[155716.576010] [drm] Manually setting wedged to 0
>[155716.644009] hub 3-0:1.0: over-current change on port 2
>[155778.072013] PM: Syncing filesystems ... done.
>[155778.184007] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[155778.205230] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[155778.244533] serial 00:0a: disabled
>[155778.249265] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[155778.254813] wlan0: Going into suspend...
>[155778.260342] ACPI handle has no context!
>[155778.260342] sdhci-pci 0000:04:00.1: PCI INT B disabled
>[155778.404006] Intel ICH 0000:00:1e.2: PCI INT A disabled
>[155778.412069] ACPI handle has no context!
>[155778.412069] ipw2200 0000:04:02.0: PCI INT A disabled
>[155778.420087] i915_save_display(): BLC_PWM_CTL:6c676c66
>[155778.425502] ACPI handle has no context!
>[155778.440010] i915 0000:00:02.0: power state changed by ACPI to D3
>[155778.492063] sd 0:0:0:0: [sda] Stopping disk
>[155778.592009] tg3 0000:02:00.0: PME# enabled
>[155778.592009] pcieport 0000:00:1c.0: wake-up capability enabled by ACPI
>[155779.140010] PM: suspend of devices complete after 914.503 msecs
>[155779.208008] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3
>[155779.260009] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D3
>[155779.432010] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D3
>[155779.476770] PM: late suspend of devices complete after 292.396 msecs
>[155779.560008] ACPI: Preparing to enter system sleep state S3
>[155779.932008] Extended CMOS year: 2000
>[155779.932008] Back to C!
>[155779.932008] Extended CMOS year: 2000
>[155779.932008] Force enabled HPET at resume
>[155779.977246] ACPI: Waking up from system sleep state S3
>[155780.596008] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900003, writing 0x900007)
>[155780.596008] pci 0000:00:02.1: restoring config space at offset 0x4 (was 0x0, writing 0x60200000)
>[155780.596008] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x1fff1, writing 0x60116001)
>[155780.596008] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0xf0, writing 0x7070)
>[155780.596008] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
>[155780.640008] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[155780.652008] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[155780.657559] uhci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
>[155780.657559] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x8 (was 0x1, writing 0x1821)
>[155780.657559] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800005)
>[155780.664008] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[155780.676009] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[155780.688008] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
>[155780.700008] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
>[155780.705557] uhci_hcd 0000:00:1d.1: restoring config space at offset 0xf (was 0x200, writing 0x20b)
>[155780.705557] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x8 (was 0x1, writing 0x1841)
>[155780.705557] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800005)
>[155780.712008] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
>[155780.724009] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
>[155780.729563] uhci_hcd 0000:00:1d.2: restoring config space at offset 0xf (was 0x300, writing 0x30b)
>[155780.729563] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x8 (was 0x1, writing 0x1861)
>[155780.729563] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800005)
>[155780.729563] uhci_hcd 0000:00:1d.3: restoring config space at offset 0xf (was 0x400, writing 0x40b)
>[155780.729563] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x8 (was 0x1, writing 0x1881)
>[155780.729563] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800005)
>[155780.729563] ehci_hcd 0000:00:1d.7: restoring config space at offset 0xf (was 0x400, writing 0x40b)
>[155780.729563] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x4 (was 0x0, writing 0xa0040000)
>[155780.729563] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900106)
>[155780.736009] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
>[155780.748008] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
>[155780.753400] Intel ICH 0000:00:1e.2: restoring config space at offset 0x1 (was 0x2900007, writing 0x2900003)
>[155780.753400] pci 0000:00:1e.3: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
>[155780.753400] tg3 0000:02:00.0: restoring config space at offset 0xc (was 0x0, writing 0xfc9e0000)
>[155780.753400] tg3 0000:02:00.0: restoring config space at offset 0x1 (was 0x100102, writing 0x100106)
>[155780.768010] sdhci-pci 0000:04:00.1: BAR 0: set to [mem 0xa0201000-0xa02010ff] (PCI address [0xa0201000-0xa02010ff]
>[155780.773341] sdhci-pci 0000:04:00.1: restoring config space at offset 0x3 (was 0x800000, writing 0x804000)
>[155780.773341] sdhci-pci 0000:04:00.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106)
>[155780.773341] PM: early resume of devices complete after 177.388 msecs
>[155780.784017] i915 0000:00:02.0: setting latency timer to 64
>[155780.784017] i915_restore_display(): BLC_PWM_CTL=6c676c66
>[155780.790156] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[155780.790156] usb usb2: root hub lost power or was reset
>[155780.796626] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[155780.796626] usb usb3: root hub lost power or was reset
>[155780.802380] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[155780.802380] usb usb4: root hub lost power or was reset
>[155780.808390] uhci_hcd 0000:00:1d.3: setting latency timer to 64
>[155780.808390] usb usb5: root hub lost power or was reset
>[155780.813853] i915_restore_display(): BLC_PWM_CTL:6c676c66
>[155780.819159] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[155780.819159] pci 0000:00:1e.0: setting latency timer to 64
>[155780.819159] Intel ICH 0000:00:1e.2: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>[155780.824903] ata_piix 0000:00:1f.2: setting latency timer to 64
>[155780.832009] pcieport 0000:00:1c.0: wake-up capability disabled by ACPI
>[155780.838284] sdhci-pci 0000:04:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>[155780.844460] wlan0: Coming out of suspend...
>[155780.849858] sd 0:0:0:0: [sda] Starting disk
>[155780.856007] render error detected, EIR: 0x00000010
>[155780.856007] page table error
>[155780.856007]   PGTBL_ER: 0x00000001
>[155780.856007] [drm:i915_report_and_clear_eir] *ERROR* EIR stuck: 0x00000010, masking
>[155780.856007] render error detected, EIR: 0x00000010
>[155780.856007] page table error
>[155780.856007]   PGTBL_ER: 0x00000001
>[155780.893775] Intel ICH 0000:00:1e.2: setting latency timer to 64
>[155780.893775] tg3 0000:02:00.0: PME# disabled
>[155781.048006] lbam=00 lbah=00
>[155781.054495] sdhci-pci 0000:04:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[155781.060010] ipw2200 0000:04:02.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
>[155781.065415] lbam=00 lbah=00
>[155781.092007] serial 00:0a: activated
>[155782.872155] lbam=00 lbah=00
>[155782.877502] lbam=00 lbah=00
>[155782.888778] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[155782.888778] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[155782.894188] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
>[155782.899616] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
>[155782.905106] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
>[155782.928606] ata1.00: configured for UDMA/100
>[155782.956636] ata1.00: configured for UDMA/100
>[155782.962026] ata1: EH complete
>[155783.126358] PM: resume of devices complete after 2347.355 msecs
>[155783.131750] Restarting tasks ... 
>[155783.132007] hub 3-0:1.0: over-current change on port 1
>[155783.156012] done.
>[155783.188011] video LNXVIDEO:00: Restoring backlight state
>[155783.216008] [drm] Manually setting wedged to 0
>[155783.292009] hub 3-0:1.0: over-current change on port 2
>[171891.712011] PM: Syncing filesystems ... done.
>[171891.832007] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[171891.848057] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[171891.886197] serial 00:0a: disabled
>[171891.888289] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[171891.888289] sd 0:0:0:0: [sda] Stopping disk
>[171891.893338] wlan0: Going into suspend...
>[171891.896753] ipw2200 0000:04:02.0: PCI INT A disabled
>[171892.040690] ACPI handle has no context!
>[171892.040690] ACPI handle has no context!
>[171892.040690] sdhci-pci 0000:04:00.1: PCI INT B disabled
>[171892.044864] Intel ICH 0000:00:1e.2: PCI INT A disabled
>[171892.049215] ACPI handle has no context!
>[171892.049215] i915_save_display(): BLC_PWM_CTL:6c676c66
>[171892.068009] i915 0000:00:02.0: power state changed by ACPI to D3
>[171892.228008] tg3 0000:02:00.0: PME# enabled
>[171892.228008] pcieport 0000:00:1c.0: wake-up capability enabled by ACPI
>[171892.568430] PM: suspend of devices complete after 701.943 msecs
>[171892.636009] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3
>[171892.688009] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D3
>[171892.860009] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D3
>[171892.904012] PM: late suspend of devices complete after 291.972 msecs
>[171892.988009] ACPI: Preparing to enter system sleep state S3
>[171893.360009] Extended CMOS year: 2000
>[171893.360009] Back to C!
>[171893.360009] Extended CMOS year: 2000
>[171893.360009] Force enabled HPET at resume
>[171893.404518] ACPI: Waking up from system sleep state S3
>[171893.920008] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900003, writing 0x900007)
>[171893.920008] pci 0000:00:02.1: restoring config space at offset 0x4 (was 0x0, writing 0x60200000)
>[171893.920008] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x1fff1, writing 0x60116001)
>[171893.920008] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0xf0, writing 0x7070)
>[171893.920008] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
>[171893.964008] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[171893.976009] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[171893.981472] uhci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
>[171893.981472] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x8 (was 0x1, writing 0x1821)
>[171893.981472] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800005)
>[171893.988008] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[171894.000009] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[171894.012009] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
>[171894.024009] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
>[171894.029475] uhci_hcd 0000:00:1d.1: restoring config space at offset 0xf (was 0x200, writing 0x20b)
>[171894.029475] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x8 (was 0x1, writing 0x1841)
>[171894.029475] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800005)
>[171894.036008] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
>[171894.048008] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
>[171894.053477] uhci_hcd 0000:00:1d.2: restoring config space at offset 0xf (was 0x300, writing 0x30b)
>[171894.053477] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x8 (was 0x1, writing 0x1861)
>[171894.053477] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800005)
>[171894.053477] uhci_hcd 0000:00:1d.3: restoring config space at offset 0xf (was 0x400, writing 0x40b)
>[171894.053477] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x8 (was 0x1, writing 0x1881)
>[171894.053477] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800005)
>[171894.053477] ehci_hcd 0000:00:1d.7: restoring config space at offset 0xf (was 0x400, writing 0x40b)
>[171894.053477] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x4 (was 0x0, writing 0xa0040000)
>[171894.053477] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900106)
>[171894.060008] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
>[171894.072008] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
>[171894.077314] Intel ICH 0000:00:1e.2: restoring config space at offset 0x1 (was 0x2900007, writing 0x2900003)
>[171894.077314] pci 0000:00:1e.3: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
>[171894.077314] tg3 0000:02:00.0: restoring config space at offset 0xc (was 0x0, writing 0xfc9e0000)
>[171894.077314] tg3 0000:02:00.0: restoring config space at offset 0x1 (was 0x100102, writing 0x100106)
>[171894.092010] sdhci-pci 0000:04:00.1: BAR 0: set to [mem 0xa0201000-0xa02010ff] (PCI address [0xa0201000-0xa02010ff]
>[171894.097254] sdhci-pci 0000:04:00.1: restoring config space at offset 0x3 (was 0x800000, writing 0x804000)
>[171894.097254] sdhci-pci 0000:04:00.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106)
>[171894.097254] PM: early resume of devices complete after 177.304 msecs
>[171894.108018] i915 0000:00:02.0: setting latency timer to 64
>[171894.108018] i915_restore_display(): BLC_PWM_CTL=6c676c66
>[171894.114265] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[171894.114265] usb usb2: root hub lost power or was reset
>[171894.120056] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[171894.120056] usb usb3: root hub lost power or was reset
>[171894.125462] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[171894.125462] usb usb4: root hub lost power or was reset
>[171894.131004] uhci_hcd 0000:00:1d.3: setting latency timer to 64
>[171894.131004] usb usb5: root hub lost power or was reset
>[171894.136604] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[171894.136604] pci 0000:00:1e.0: setting latency timer to 64
>[171894.136604] Intel ICH 0000:00:1e.2: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>[171894.142629] ata_piix 0000:00:1f.2: setting latency timer to 64
>[171894.148009] pcieport 0000:00:1c.0: wake-up capability disabled by ACPI
>[171894.153288] i915_restore_display(): BLC_PWM_CTL:6c676c66
>[171894.158484] sdhci-pci 0000:04:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>[171894.163734] wlan0: Coming out of suspend...
>[171894.168983] sd 0:0:0:0: [sda] Starting disk
>[171894.176008] Intel ICH 0000:00:1e.2: setting latency timer to 64
>[171894.176008] tg3 0000:02:00.0: PME# disabled
>[171894.332008] lbam=00 lbah=00
>[171894.337269] sdhci-pci 0000:04:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[171894.342749] ipw2200 0000:04:02.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
>[171894.348261] lbam=00 lbah=00
>[171894.353933] render error detected, EIR: 0x00000010
>[171894.353933] page table error
>[171894.353933]   PGTBL_ER: 0x00000001
>[171894.353933] [drm:i915_report_and_clear_eir] *ERROR* EIR stuck: 0x00000010, masking
>[171894.353933] render error detected, EIR: 0x00000010
>[171894.353933] page table error
>[171894.353933]   PGTBL_ER: 0x00000001
>[171894.416008] serial 00:0a: activated
>[171896.288055] lbam=00 lbah=00
>[171896.293355] lbam=00 lbah=00
>[171896.304543] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[171896.304543] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[171896.309901] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
>[171896.315280] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
>[171896.320754] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
>[171896.344433] ata1.00: configured for UDMA/100
>[171896.372443] ata1.00: configured for UDMA/100
>[171896.377795] ata1: EH complete
>[171896.543195] PM: resume of devices complete after 2440.359 msecs
>[171896.548537] Restarting tasks ... 
>[171896.548537] hub 3-0:1.0: over-current change on port 1
>[171896.636011] done.
>[171896.684010] video LNXVIDEO:00: Restoring backlight state
>[171896.724009] [drm] Manually setting wedged to 0
>[171896.784007] hub 3-0:1.0: over-current change on port 2
>[171941.872009] PM: Syncing filesystems ... done.
>[171942.092007] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[171942.113209] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[171942.148533] serial 00:0a: disabled
>[171942.153524] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[171942.159091] wlan0: Going into suspend...
>[171942.164616] ACPI handle has no context!
>[171942.164616] sdhci-pci 0000:04:00.1: PCI INT B disabled
>[171942.308006] Intel ICH 0000:00:1e.2: PCI INT A disabled
>[171942.316290] ACPI handle has no context!
>[171942.316290] ipw2200 0000:04:02.0: PCI INT A disabled
>[171942.324323] i915_save_display(): BLC_PWM_CTL:6c676c66
>[171942.329730] ACPI handle has no context!
>[171942.344009] i915 0000:00:02.0: power state changed by ACPI to D3
>[171942.396005] sd 0:0:0:0: [sda] Stopping disk
>[171942.500009] tg3 0000:02:00.0: PME# enabled
>[171942.500009] pcieport 0000:00:1c.0: wake-up capability enabled by ACPI
>[171943.052011] PM: suspend of devices complete after 918.654 msecs
>[171943.120009] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3
>[171943.172009] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D3
>[171943.344009] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D3
>[171943.388897] PM: late suspend of devices complete after 292.420 msecs
>[171943.472008] ACPI: Preparing to enter system sleep state S3
>[171943.844009] Extended CMOS year: 2000
>[171943.844009] Back to C!
>[171943.844009] Extended CMOS year: 2000
>[171943.844009] Force enabled HPET at resume
>[171943.889450] ACPI: Waking up from system sleep state S3
>[171944.440008] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900003, writing 0x900007)
>[171944.440008] pci 0000:00:02.1: restoring config space at offset 0x4 (was 0x0, writing 0x60200000)
>[171944.440008] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x1fff1, writing 0x60116001)
>[171944.440008] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0xf0, writing 0x7070)
>[171944.440008] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
>[171944.484008] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[171944.496009] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[171944.501578] uhci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
>[171944.501578] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x8 (was 0x1, writing 0x1821)
>[171944.501578] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800005)
>[171944.508009] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[171944.520009] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[171944.532008] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
>[171944.544008] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
>[171944.549569] uhci_hcd 0000:00:1d.1: restoring config space at offset 0xf (was 0x200, writing 0x20b)
>[171944.549569] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x8 (was 0x1, writing 0x1841)
>[171944.549569] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800005)
>[171944.556008] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
>[171944.568008] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
>[171944.573573] uhci_hcd 0000:00:1d.2: restoring config space at offset 0xf (was 0x300, writing 0x30b)
>[171944.573573] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x8 (was 0x1, writing 0x1861)
>[171944.573573] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800005)
>[171944.573573] uhci_hcd 0000:00:1d.3: restoring config space at offset 0xf (was 0x400, writing 0x40b)
>[171944.573573] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x8 (was 0x1, writing 0x1881)
>[171944.573573] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800005)
>[171944.573573] ehci_hcd 0000:00:1d.7: restoring config space at offset 0xf (was 0x400, writing 0x40b)
>[171944.573573] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x4 (was 0x0, writing 0xa0040000)
>[171944.573573] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900106)
>[171944.580009] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
>[171944.592009] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
>[171944.597417] Intel ICH 0000:00:1e.2: restoring config space at offset 0x1 (was 0x2900007, writing 0x2900003)
>[171944.597417] pci 0000:00:1e.3: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
>[171944.597417] tg3 0000:02:00.0: restoring config space at offset 0xc (was 0x0, writing 0xfc9e0000)
>[171944.597417] tg3 0000:02:00.0: restoring config space at offset 0x1 (was 0x100102, writing 0x100106)
>[171944.612010] sdhci-pci 0000:04:00.1: BAR 0: set to [mem 0xa0201000-0xa02010ff] (PCI address [0xa0201000-0xa02010ff]
>[171944.617358] sdhci-pci 0000:04:00.1: restoring config space at offset 0x3 (was 0x800000, writing 0x804000)
>[171944.617358] sdhci-pci 0000:04:00.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106)
>[171944.617358] PM: early resume of devices complete after 177.408 msecs
>[171944.624008] i915 0000:00:02.0: setting latency timer to 64
>[171944.624008] i915_restore_display(): BLC_PWM_CTL=6c676c66
>[171944.629616] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[171944.629616] usb usb2: root hub lost power or was reset
>[171944.640008] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[171944.640008] usb usb3: root hub lost power or was reset
>[171944.647729] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[171944.647729] usb usb4: root hub lost power or was reset
>[171944.653237] uhci_hcd 0000:00:1d.3: setting latency timer to 64
>[171944.653237] usb usb5: root hub lost power or was reset
>[171944.658789] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[171944.658789] i915_restore_display(): BLC_PWM_CTL:6c676c66
>[171944.664189] pci 0000:00:1e.0: setting latency timer to 64
>[171944.664189] Intel ICH 0000:00:1e.2: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>[171944.669668] ata_piix 0000:00:1f.2: setting latency timer to 64
>[171944.672009] pcieport 0000:00:1c.0: wake-up capability disabled by ACPI
>[171944.680008] sdhci-pci 0000:04:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>[171944.688172] wlan0: Coming out of suspend...
>[171944.693574] sd 0:0:0:0: [sda] Starting disk
>[171944.700008] render error detected, EIR: 0x00000010
>[171944.700008] page table error
>[171944.700008]   PGTBL_ER: 0x00000001
>[171944.700008] [drm:i915_report_and_clear_eir] *ERROR* EIR stuck: 0x00000010, masking
>[171944.700008] render error detected, EIR: 0x00000010
>[171944.700008] page table error
>[171944.700008]   PGTBL_ER: 0x00000001
>[171944.736239] Intel ICH 0000:00:1e.2: setting latency timer to 64
>[171944.736239] tg3 0000:02:00.0: PME# disabled
>[171944.888005] lbam=00 lbah=00
>[171944.896479] ipw2200 0000:04:02.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
>[171944.901836] sdhci-pci 0000:04:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[171944.907350] lbam=00 lbah=00
>[171944.932007] serial 00:0a: activated
>[171947.068135] lbam=00 lbah=00
>[171947.073461] lbam=00 lbah=00
>[171947.084638] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[171947.084638] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[171947.090029] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
>[171947.095440] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
>[171947.100922] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
>[171947.124613] ata1.00: configured for UDMA/100
>[171947.152623] ata1.00: configured for UDMA/100
>[171947.158004] ata1: EH complete
>[171947.318591] PM: resume of devices complete after 2695.605 msecs
>[171947.324006] Restarting tasks ... 
>[171947.324006] hub 3-0:1.0: over-current change on port 1
>[171947.360011] done.
>[171947.412009] video LNXVIDEO:00: Restoring backlight state
>[171947.436008] [drm] Manually setting wedged to 0
>[171947.516007] hub 3-0:1.0: over-current change on port 2
>[172281.268010] PM: Syncing filesystems ... done.
>[172281.340007] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[172281.356154] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[172281.389235] serial 00:0a: disabled
>[172281.389235] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[172281.393501] wlan0: Going into suspend...
>[172281.396848] ipw2200 0000:04:02.0: PCI INT A disabled
>[172281.540563] ACPI handle has no context!
>[172281.540563] ACPI handle has no context!
>[172281.540563] sdhci-pci 0000:04:00.1: PCI INT B disabled
>[172281.540563] ACPI handle has no context!
>[172281.540563] sd 0:0:0:0: [sda] Stopping disk
>[172281.546339] Intel ICH 0000:00:1e.2: PCI INT A disabled
>[172281.549469] i915_save_display(): BLC_PWM_CTL:6c676c66
>[172281.568007] i915 0000:00:02.0: power state changed by ACPI to D3
>[172281.732007] tg3 0000:02:00.0: PME# enabled
>[172281.732007] pcieport 0000:00:1c.0: wake-up capability enabled by ACPI
>[172282.072011] PM: suspend of devices complete after 697.460 msecs
>[172282.140008] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3
>[172282.192009] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D3
>[172282.364008] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D3
>[172282.408786] PM: late suspend of devices complete after 292.398 msecs
>[172282.492009] ACPI: Preparing to enter system sleep state S3
>[172282.864008] Extended CMOS year: 2000
>[172282.864008] Back to C!
>[172282.864008] Extended CMOS year: 2000
>[172282.864008] Force enabled HPET at resume
>[172282.909299] ACPI: Waking up from system sleep state S3
>[172283.528009] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900003, writing 0x900007)
>[172283.528009] pci 0000:00:02.1: restoring config space at offset 0x4 (was 0x0, writing 0x60200000)
>[172283.528009] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x1fff1, writing 0x60116001)
>[172283.528009] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0xf0, writing 0x7070)
>[172283.528009] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
>[172283.572008] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[172283.584009] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[172283.589548] uhci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
>[172283.589548] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x8 (was 0x1, writing 0x1821)
>[172283.589548] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800005)
>[172283.596009] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[172283.608009] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[172283.620009] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
>[172283.632009] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
>[172283.637549] uhci_hcd 0000:00:1d.1: restoring config space at offset 0xf (was 0x200, writing 0x20b)
>[172283.637549] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x8 (was 0x1, writing 0x1841)
>[172283.637549] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800005)
>[172283.644008] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
>[172283.656009] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
>[172283.661552] uhci_hcd 0000:00:1d.2: restoring config space at offset 0xf (was 0x300, writing 0x30b)
>[172283.661552] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x8 (was 0x1, writing 0x1861)
>[172283.661552] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800005)
>[172283.661552] uhci_hcd 0000:00:1d.3: restoring config space at offset 0xf (was 0x400, writing 0x40b)
>[172283.661552] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x8 (was 0x1, writing 0x1881)
>[172283.661552] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800005)
>[172283.661552] ehci_hcd 0000:00:1d.7: restoring config space at offset 0xf (was 0x400, writing 0x40b)
>[172283.661552] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x4 (was 0x0, writing 0xa0040000)
>[172283.661552] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900106)
>[172283.668008] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
>[172283.680008] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
>[172283.685391] Intel ICH 0000:00:1e.2: restoring config space at offset 0x1 (was 0x2900007, writing 0x2900003)
>[172283.685391] pci 0000:00:1e.3: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
>[172283.685391] tg3 0000:02:00.0: restoring config space at offset 0xc (was 0x0, writing 0xfc9e0000)
>[172283.685391] tg3 0000:02:00.0: restoring config space at offset 0x1 (was 0x100102, writing 0x100106)
>[172283.700010] sdhci-pci 0000:04:00.1: BAR 0: set to [mem 0xa0201000-0xa02010ff] (PCI address [0xa0201000-0xa02010ff]
>[172283.705340] sdhci-pci 0000:04:00.1: restoring config space at offset 0x3 (was 0x800000, writing 0x804000)
>[172283.705340] sdhci-pci 0000:04:00.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106)
>[172283.705340] PM: early resume of devices complete after 177.409 msecs
>[172283.716018] i915 0000:00:02.0: setting latency timer to 64
>[172283.716018] i915_restore_display(): BLC_PWM_CTL=6c676c66
>[172283.722177] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[172283.722177] usb usb2: root hub lost power or was reset
>[172283.728244] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[172283.728244] usb usb3: root hub lost power or was reset
>[172283.733818] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[172283.733818] usb usb4: root hub lost power or was reset
>[172283.739431] uhci_hcd 0000:00:1d.3: setting latency timer to 64
>[172283.739431] usb usb5: root hub lost power or was reset
>[172283.745084] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[172283.745084] pci 0000:00:1e.0: setting latency timer to 64
>[172283.745084] Intel ICH 0000:00:1e.2: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>[172283.751436] i915_restore_display(): BLC_PWM_CTL:6c676c66
>[172283.756799] ata_piix 0000:00:1f.2: setting latency timer to 64
>[172283.760009] pcieport 0000:00:1c.0: wake-up capability disabled by ACPI
>[172283.768009] sdhci-pci 0000:04:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>[172283.774981] wlan0: Coming out of suspend...
>[172283.780402] sd 0:0:0:0: [sda] Starting disk
>[172283.788008] Intel ICH 0000:00:1e.2: setting latency timer to 64
>[172283.788008] tg3 0000:02:00.0: PME# disabled
>[172283.940006] lbam=00 lbah=00
>[172283.948739] render error detected, EIR: 0x00000010
>[172283.948739] page table error
>[172283.948739]   PGTBL_ER: 0x00000001
>[172283.948739] [drm:i915_report_and_clear_eir] *ERROR* EIR stuck: 0x00000010, masking
>[172283.948739] render error detected, EIR: 0x00000010
>[172283.948739] page table error
>[172283.948739]   PGTBL_ER: 0x00000001
>[172283.985857] sdhci-pci 0000:04:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[172283.991591] ipw2200 0000:04:02.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
>[172283.997019] lbam=00 lbah=00
>[172284.020010] serial 00:0a: activated
>[172285.764157] lbam=00 lbah=00
>[172285.769535] lbam=00 lbah=00
>[172285.780822] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[172285.780822] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[172285.786259] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
>[172285.791718] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
>[172285.797352] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
>[172285.820650] ata1.00: configured for UDMA/100
>[172285.848660] ata1.00: configured for UDMA/100
>[172285.854086] ata1: EH complete
>[172286.014691] PM: resume of devices complete after 2303.666 msecs
>[172286.020124] Restarting tasks ... 
>[172286.020124] hub 3-0:1.0: over-current change on port 1
>[172286.092010] done.
>[172286.152011] video LNXVIDEO:00: Restoring backlight state
>[172286.192011] [drm] Manually setting wedged to 0
>[172286.236010] hub 3-0:1.0: over-current change on port 2
>[172407.740012] PM: Syncing filesystems ... done.
>[172407.928006] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[172407.944152] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[172407.984021] serial 00:0a: disabled
>[172407.985779] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[172407.988582] wlan0: Going into suspend...
>[172407.992007] ipw2200 0000:04:02.0: PCI INT A disabled
>[172408.136012] ACPI handle has no context!
>[172408.136012] ACPI handle has no context!
>[172408.136012] sdhci-pci 0000:04:00.1: PCI INT B disabled
>[172408.140151] Intel ICH 0000:00:1e.2: PCI INT A disabled
>[172408.144559] ACPI handle has no context!
>[172408.144559] i915_save_display(): BLC_PWM_CTL:6c676c66
>[172408.160005] sd 0:0:0:0: [sda] Stopping disk
>[172408.205924] i915 0000:00:02.0: power state changed by ACPI to D3
>[172408.328008] tg3 0000:02:00.0: PME# enabled
>[172408.328008] pcieport 0000:00:1c.0: wake-up capability enabled by ACPI
>[172408.868011] PM: suspend of devices complete after 905.429 msecs
>[172408.936009] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3
>[172408.988009] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D3
>[172409.180008] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D3
>[172409.224835] PM: late suspend of devices complete after 312.333 msecs
>[172409.308009] ACPI: Preparing to enter system sleep state S3
>[172409.680009] Extended CMOS year: 2000
>[172409.680009] Back to C!
>[172409.680009] Extended CMOS year: 2000
>[172409.680009] Force enabled HPET at resume
>[172409.725393] ACPI: Waking up from system sleep state S3
>[172410.344008] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900003, writing 0x900007)
>[172410.344008] pci 0000:00:02.1: restoring config space at offset 0x4 (was 0x0, writing 0x60200000)
>[172410.344008] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x1fff1, writing 0x60116001)
>[172410.344008] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0xf0, writing 0x7070)
>[172410.344008] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
>[172410.388009] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[172410.400009] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[172410.405581] uhci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
>[172410.405581] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x8 (was 0x1, writing 0x1821)
>[172410.405581] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800005)
>[172410.412009] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[172410.424009] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[172410.436008] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
>[172410.448008] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
>[172410.453589] uhci_hcd 0000:00:1d.1: restoring config space at offset 0xf (was 0x200, writing 0x20b)
>[172410.453589] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x8 (was 0x1, writing 0x1841)
>[172410.453589] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800005)
>[172410.460009] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
>[172410.472009] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
>[172410.477579] uhci_hcd 0000:00:1d.2: restoring config space at offset 0xf (was 0x300, writing 0x30b)
>[172410.477579] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x8 (was 0x1, writing 0x1861)
>[172410.477579] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800005)
>[172410.477579] uhci_hcd 0000:00:1d.3: restoring config space at offset 0xf (was 0x400, writing 0x40b)
>[172410.477579] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x8 (was 0x1, writing 0x1881)
>[172410.477579] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800005)
>[172410.477579] ehci_hcd 0000:00:1d.7: restoring config space at offset 0xf (was 0x400, writing 0x40b)
>[172410.477579] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x4 (was 0x0, writing 0xa0040000)
>[172410.477579] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900106)
>[172410.484008] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
>[172410.496008] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
>[172410.501414] Intel ICH 0000:00:1e.2: restoring config space at offset 0x1 (was 0x2900007, writing 0x2900003)
>[172410.501414] pci 0000:00:1e.3: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
>[172410.501414] tg3 0000:02:00.0: restoring config space at offset 0xc (was 0x0, writing 0xfc9e0000)
>[172410.501414] tg3 0000:02:00.0: restoring config space at offset 0x1 (was 0x100102, writing 0x100106)
>[172410.516010] sdhci-pci 0000:04:00.1: BAR 0: set to [mem 0xa0201000-0xa02010ff] (PCI address [0xa0201000-0xa02010ff]
>[172410.521365] sdhci-pci 0000:04:00.1: restoring config space at offset 0x3 (was 0x800000, writing 0x804000)
>[172410.521365] sdhci-pci 0000:04:00.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106)
>[172410.521365] PM: early resume of devices complete after 177.413 msecs
>[172410.532030] i915 0000:00:02.0: setting latency timer to 64
>[172410.532030] i915_restore_display(): BLC_PWM_CTL=00000000
>[172410.537416] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[172410.537416] usb usb2: root hub lost power or was reset
>[172410.543292] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[172410.543292] usb usb3: root hub lost power or was reset
>[172410.548779] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[172410.548779] usb usb4: root hub lost power or was reset
>[172410.556006] uhci_hcd 0000:00:1d.3: setting latency timer to 64
>[172410.556006] usb usb5: root hub lost power or was reset
>[172410.561825] i915_restore_display(): BLC_PWM_CTL:00000000
>[172410.567076] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[172410.567076] pci 0000:00:1e.0: setting latency timer to 64
>[172410.567076] Intel ICH 0000:00:1e.2: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>[172410.572493] ata_piix 0000:00:1f.2: setting latency timer to 64
>[172410.576009] sdhci-pci 0000:04:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>[172410.581778] pcieport 0000:00:1c.0: wake-up capability disabled by ACPI
>[172410.588008] wlan0: Coming out of suspend...
>[172410.595218] sd 0:0:0:0: [sda] Starting disk
>[172410.600452] render error detected, EIR: 0x00000010
>[172410.600452] page table error
>[172410.600452]   PGTBL_ER: 0x00000001
>[172410.600452] [drm:i915_report_and_clear_eir] *ERROR* EIR stuck: 0x00000010, masking
>[172410.600452] render error detected, EIR: 0x00000010
>[172410.600452] page table error
>[172410.600452]   PGTBL_ER: 0x00000001
>[172410.637688] Intel ICH 0000:00:1e.2: setting latency timer to 64
>[172410.637688] sdhci-pci 0000:04:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[172410.644008] tg3 0000:02:00.0: PME# disabled
>[172410.796006] lbam=00 lbah=00
>[172410.804565] ipw2200 0000:04:02.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
>[172410.810368] lbam=00 lbah=00
>[172410.848008] serial 00:0a: activated
>[172412.576157] lbam=00 lbah=00
>[172412.581480] lbam=00 lbah=00
>[172412.592803] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[172412.592803] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[172412.598183] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
>[172412.603588] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
>[172412.609183] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
>[172412.632631] ata1.00: configured for UDMA/100
>[172412.649671] CCMP: decrypt failed: STA=00:18:39:ce:a3:c6
>[172412.660637] ata1.00: configured for UDMA/100
>[172412.666005] ata1: EH complete
>[172412.822378] PM: resume of devices complete after 2295.323 msecs
>[172412.827737] Restarting tasks ... 
>[172412.828008] hub 3-0:1.0: over-current change on port 1
>[172412.888010] done.
>[172412.928011] video LNXVIDEO:00: Restoring backlight state
>[172412.972009] [drm] Manually setting wedged to 0
>[172413.052009] hub 3-0:1.0: over-current change on port 2
>[173950.880012] PM: Syncing filesystems ... done.
>[173950.988007] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[173951.009364] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[173951.049508] serial 00:0a: disabled
>[173951.054751] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[173951.060313] wlan0: Going into suspend...
>[173951.065815] ACPI handle has no context!
>[173951.065815] sdhci-pci 0000:04:00.1: PCI INT B disabled
>[173951.212008] Intel ICH 0000:00:1e.2: PCI INT A disabled
>[173951.217733] ACPI handle has no context!
>[173951.217733] ipw2200 0000:04:02.0: PCI INT A disabled
>[173951.224008] i915_save_display(): BLC_PWM_CTL:6c676c66
>[173951.229539] ACPI handle has no context!
>[173951.244010] i915 0000:00:02.0: power state changed by ACPI to D3
>[173951.304005] sd 0:0:0:0: [sda] Stopping disk
>[173951.400009] tg3 0000:02:00.0: PME# enabled
>[173951.400009] pcieport 0000:00:1c.0: wake-up capability enabled by ACPI
>[173951.968011] PM: suspend of devices complete after 938.639 msecs
>[173952.036008] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3
>[173952.088009] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D3
>[173952.260009] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D3
>[173952.304399] PM: late suspend of devices complete after 292.271 msecs
>[173952.388009] ACPI: Preparing to enter system sleep state S3
>[173952.760008] Extended CMOS year: 2000
>[173952.760008] Back to C!
>[173952.760008] Extended CMOS year: 2000
>[173952.760008] Force enabled HPET at resume
>[173952.804925] ACPI: Waking up from system sleep state S3
>[173953.424008] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900003, writing 0x900007)
>[173953.424008] pci 0000:00:02.1: restoring config space at offset 0x4 (was 0x0, writing 0x60200000)
>[173953.424008] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x1fff1, writing 0x60116001)
>[173953.424008] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0xf0, writing 0x7070)
>[173953.424008] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
>[173953.468008] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[173953.480009] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[173953.485538] uhci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
>[173953.485538] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x8 (was 0x1, writing 0x1821)
>[173953.485538] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800005)
>[173953.492008] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[173953.504009] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[173953.516008] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
>[173953.528008] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
>[173953.533540] uhci_hcd 0000:00:1d.1: restoring config space at offset 0xf (was 0x200, writing 0x20b)
>[173953.533540] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x8 (was 0x1, writing 0x1841)
>[173953.533540] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800005)
>[173953.540009] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
>[173953.552009] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
>[173953.557542] uhci_hcd 0000:00:1d.2: restoring config space at offset 0xf (was 0x300, writing 0x30b)
>[173953.557542] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x8 (was 0x1, writing 0x1861)
>[173953.557542] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800005)
>[173953.557542] uhci_hcd 0000:00:1d.3: restoring config space at offset 0xf (was 0x400, writing 0x40b)
>[173953.557542] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x8 (was 0x1, writing 0x1881)
>[173953.557542] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800005)
>[173953.557542] ehci_hcd 0000:00:1d.7: restoring config space at offset 0xf (was 0x400, writing 0x40b)
>[173953.557542] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x4 (was 0x0, writing 0xa0040000)
>[173953.557542] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900106)
>[173953.564008] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
>[173953.576008] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
>[173953.581375] Intel ICH 0000:00:1e.2: restoring config space at offset 0x1 (was 0x2900007, writing 0x2900003)
>[173953.581375] pci 0000:00:1e.3: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
>[173953.581375] tg3 0000:02:00.0: restoring config space at offset 0xc (was 0x0, writing 0xfc9e0000)
>[173953.581375] tg3 0000:02:00.0: restoring config space at offset 0x1 (was 0x100102, writing 0x100106)
>[173953.596010] sdhci-pci 0000:04:00.1: BAR 0: set to [mem 0xa0201000-0xa02010ff] (PCI address [0xa0201000-0xa02010ff]
>[173953.601323] sdhci-pci 0000:04:00.1: restoring config space at offset 0x3 (was 0x800000, writing 0x804000)
>[173953.601323] sdhci-pci 0000:04:00.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106)
>[173953.601323] PM: early resume of devices complete after 177.371 msecs
>[173953.608021] i915 0000:00:02.0: setting latency timer to 64
>[173953.608021] i915_restore_display(): BLC_PWM_CTL=6c676c66
>[173953.613601] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[173953.613601] usb usb2: root hub lost power or was reset
>[173953.624008] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[173953.624008] usb usb3: root hub lost power or was reset
>[173953.632421] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[173953.632421] usb usb4: root hub lost power or was reset
>[173953.637900] uhci_hcd 0000:00:1d.3: setting latency timer to 64
>[173953.637900] usb usb5: root hub lost power or was reset
>[173953.643832] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[173953.643832] i915_restore_display(): BLC_PWM_CTL:6c676c66
>[173953.649213] pci 0000:00:1e.0: setting latency timer to 64
>[173953.649213] Intel ICH 0000:00:1e.2: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>[173953.655025] ata_piix 0000:00:1f.2: setting latency timer to 64
>[173953.660009] pcieport 0000:00:1c.0: wake-up capability disabled by ACPI
>[173953.665416] sdhci-pci 0000:04:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>[173953.673209] wlan0: Coming out of suspend...
>[173953.678693] sd 0:0:0:0: [sda] Starting disk
>[173953.684137] render error detected, EIR: 0x00000010
>[173953.684137] page table error
>[173953.684137]   PGTBL_ER: 0x00000001
>[173953.684137] [drm:i915_report_and_clear_eir] *ERROR* EIR stuck: 0x00000010, masking
>[173953.684137] render error detected, EIR: 0x00000010
>[173953.684137] page table error
>[173953.684137]   PGTBL_ER: 0x00000001
>[173953.722859] tg3 0000:02:00.0: PME# disabled
>[173953.876005] lbam=00 lbah=00
>[173953.883166] Intel ICH 0000:00:1e.2: setting latency timer to 64
>[173953.883166] ipw2200 0000:04:02.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
>[173953.888788] lbam=00 lbah=00
>[173953.894036] sdhci-pci 0000:04:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[173953.920007] serial 00:0a: activated
>[173955.664155] lbam=00 lbah=00
>[173955.669565] lbam=00 lbah=00
>[173955.680801] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[173955.680801] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[173955.686272] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
>[173955.691762] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
>[173955.697431] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
>[173955.720629] ata1.00: configured for UDMA/100
>[173955.748639] ata1.00: configured for UDMA/100
>[173955.754096] ata1: EH complete
>[173955.918467] PM: resume of devices complete after 2311.497 msecs
>[173955.924007] Restarting tasks ... 
>[173955.924007] hub 3-0:1.0: over-current change on port 1
>[173955.968013] done.
>[173956.032010] video LNXVIDEO:00: Restoring backlight state
>[173956.064014] [drm] Manually setting wedged to 0
>[173956.144009] hub 3-0:1.0: over-current change on port 2
>[173956.688005] lib80211_crypt: registered algorithm 'TKIP'
>[175878.608007] PM: Syncing filesystems ... done.
>[175878.784008] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[175878.800019] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[175878.836020] serial 00:0a: disabled
>[175878.837576] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[175878.841181] wlan0: Going into suspend...
>[175878.844309] ACPI handle has no context!
>[175878.844309] sdhci-pci 0000:04:00.1: PCI INT B disabled
>[175878.988010] sd 0:0:0:0: [sda] Stopping disk
>[175878.993463] ipw2200 0000:04:02.0: PCI INT A disabled
>[175878.996665] Intel ICH 0000:00:1e.2: PCI INT A disabled
>[175879.000863] ACPI handle has no context!
>[175879.000863] ACPI handle has no context!
>[175879.000863] i915_save_display(): BLC_PWM_CTL:6c676c66
>[175879.020008] i915 0000:00:02.0: power state changed by ACPI to D3
>[175879.176007] tg3 0000:02:00.0: PME# enabled
>[175879.176007] pcieport 0000:00:1c.0: wake-up capability enabled by ACPI
>[175879.528424] PM: suspend of devices complete after 709.065 msecs
>[175879.596009] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3
>[175879.648009] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D3
>[175879.820009] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D3
>[175879.865298] PM: late suspend of devices complete after 291.953 msecs
>[175879.948008] ACPI: Preparing to enter system sleep state S3
>[175880.320009] Extended CMOS year: 2000
>[175880.320009] Back to C!
>[175880.320009] Extended CMOS year: 2000
>[175880.320009] Force enabled HPET at resume
>[175880.365890] ACPI: Waking up from system sleep state S3
>[175880.984009] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900003, writing 0x900007)
>[175880.984009] pci 0000:00:02.1: restoring config space at offset 0x4 (was 0x0, writing 0x60200000)
>[175880.984009] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x1fff1, writing 0x60116001)
>[175880.984009] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0xf0, writing 0x7070)
>[175880.984009] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
>[175881.028008] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[175881.040008] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[175881.045645] uhci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
>[175881.045645] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x8 (was 0x1, writing 0x1821)
>[175881.045645] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800005)
>[175881.052009] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[175881.064008] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[175881.076008] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
>[175881.088009] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
>[175881.093638] uhci_hcd 0000:00:1d.1: restoring config space at offset 0xf (was 0x200, writing 0x20b)
>[175881.093638] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x8 (was 0x1, writing 0x1841)
>[175881.093638] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800005)
>[175881.100008] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
>[175881.112008] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
>[175881.117641] uhci_hcd 0000:00:1d.2: restoring config space at offset 0xf (was 0x300, writing 0x30b)
>[175881.117641] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x8 (was 0x1, writing 0x1861)
>[175881.117641] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800005)
>[175881.117641] uhci_hcd 0000:00:1d.3: restoring config space at offset 0xf (was 0x400, writing 0x40b)
>[175881.117641] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x8 (was 0x1, writing 0x1881)
>[175881.117641] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800005)
>[175881.117641] ehci_hcd 0000:00:1d.7: restoring config space at offset 0xf (was 0x400, writing 0x40b)
>[175881.117641] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x4 (was 0x0, writing 0xa0040000)
>[175881.117641] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900106)
>[175881.124008] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
>[175881.136008] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
>[175881.141479] Intel ICH 0000:00:1e.2: restoring config space at offset 0x1 (was 0x2900007, writing 0x2900003)
>[175881.141479] pci 0000:00:1e.3: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
>[175881.141479] tg3 0000:02:00.0: restoring config space at offset 0xc (was 0x0, writing 0xfc9e0000)
>[175881.141479] tg3 0000:02:00.0: restoring config space at offset 0x1 (was 0x100102, writing 0x100106)
>[175881.156010] sdhci-pci 0000:04:00.1: BAR 0: set to [mem 0xa0201000-0xa02010ff] (PCI address [0xa0201000-0xa02010ff]
>[175881.161422] sdhci-pci 0000:04:00.1: restoring config space at offset 0x3 (was 0x800000, writing 0x804000)
>[175881.161422] sdhci-pci 0000:04:00.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106)
>[175881.161422] PM: early resume of devices complete after 177.472 msecs
>[175881.172008] i915 0000:00:02.0: setting latency timer to 64
>[175881.172008] i915_restore_display(): BLC_PWM_CTL=6c676c66
>[175881.180482] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[175881.180482] usb usb2: root hub lost power or was reset
>[175881.186015] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[175881.186015] usb usb3: root hub lost power or was reset
>[175881.191572] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[175881.191572] usb usb4: root hub lost power or was reset
>[175881.197117] uhci_hcd 0000:00:1d.3: setting latency timer to 64
>[175881.197117] usb usb5: root hub lost power or was reset
>[175881.203007] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[175881.203007] pci 0000:00:1e.0: setting latency timer to 64
>[175881.203007] Intel ICH 0000:00:1e.2: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>[175881.208773] ata_piix 0000:00:1f.2: setting latency timer to 64
>[175881.212009] pcieport 0000:00:1c.0: wake-up capability disabled by ACPI
>[175881.220008] sdhci-pci 0000:04:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>[175881.228315] wlan0: Coming out of suspend...
>[175881.233787] sd 0:0:0:0: [sda] Starting disk
>[175881.239234] i915_restore_display(): BLC_PWM_CTL:6c676c66
>[175881.244660] tg3 0000:02:00.0: PME# disabled
>[175881.396006] lbam=00 lbah=00
>[175881.405315] Intel ICH 0000:00:1e.2: setting latency timer to 64
>[175881.405315] ipw2200 0000:04:02.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
>[175881.412008] render error detected, EIR: 0x00000010
>[175881.412008] page table error
>[175881.412008]   PGTBL_ER: 0x00000001
>[175881.412008] [drm:i915_report_and_clear_eir] *ERROR* EIR stuck: 0x00000010, masking
>[175881.412008] render error detected, EIR: 0x00000010
>[175881.412008] page table error
>[175881.412008]   PGTBL_ER: 0x00000001
>[175881.450519] sdhci-pci 0000:04:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[175881.456465] lbam=00 lbah=00
>[175881.484008] serial 00:0a: activated
>[175883.228159] lbam=00 lbah=00
>[175883.233600] lbam=00 lbah=00
>[175883.244777] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[175883.244777] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[175883.250275] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
>[175883.255803] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
>[175883.261539] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
>[175883.284628] ata1.00: configured for UDMA/100
>[175883.312642] ata1.00: configured for UDMA/100
>[175883.318141] ata1: EH complete
>[175883.482237] PM: resume of devices complete after 2315.066 msecs
>[175883.487730] Restarting tasks ... 
>[175883.488008] hub 3-0:1.0: over-current change on port 1
>[175883.536014] done.
>[175883.604010] video LNXVIDEO:00: Restoring backlight state
>[175883.704007] hub 3-0:1.0: over-current change on port 2
>[175883.740007] [drm] Manually setting wedged to 0
>[176155.808008] PM: Syncing filesystems ... done.
>[176156.000397] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[176156.021379] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[176156.056525] serial 00:0a: disabled
>[176156.061457] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[176156.067159] wlan0: Going into suspend...
>[176156.072804] ACPI handle has no context!
>[176156.072804] sdhci-pci 0000:04:00.1: PCI INT B disabled
>[176156.216006] Intel ICH 0000:00:1e.2: PCI INT A disabled
>[176156.224828] ACPI handle has no context!
>[176156.224828] ipw2200 0000:04:02.0: PCI INT A disabled
>[176156.232941] i915_save_display(): BLC_PWM_CTL:6c676c66
>[176156.238421] ACPI handle has no context!
>[176156.252005] i915 0000:00:02.0: power state changed by ACPI to D3
>[176156.320004] sd 0:0:0:0: [sda] Stopping disk
>[176156.408009] tg3 0000:02:00.0: PME# enabled
>[176156.408009] pcieport 0000:00:1c.0: wake-up capability enabled by ACPI
>[176156.972010] PM: suspend of devices complete after 930.365 msecs
>[176157.040008] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3
>[176157.092008] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D3
>[176157.264009] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D3
>[176157.309371] PM: late suspend of devices complete after 292.389 msecs
>[176157.392008] ACPI: Preparing to enter system sleep state S3
>[176157.764009] Extended CMOS year: 2000
>[176157.764009] Back to C!
>[176157.764009] Extended CMOS year: 2000
>[176157.764009] Force enabled HPET at resume
>[176157.809853] ACPI: Waking up from system sleep state S3
>[176158.428008] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900003, writing 0x900007)
>[176158.428008] pci 0000:00:02.1: restoring config space at offset 0x4 (was 0x0, writing 0x60200000)
>[176158.428008] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x1fff1, writing 0x60116001)
>[176158.428008] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0xf0, writing 0x7070)
>[176158.428008] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
>[176158.472008] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[176158.484008] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[176158.489643] uhci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
>[176158.489643] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x8 (was 0x1, writing 0x1821)
>[176158.489643] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800005)
>[176158.496008] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[176158.508008] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[176158.520008] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
>[176158.532009] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
>[176158.537634] uhci_hcd 0000:00:1d.1: restoring config space at offset 0xf (was 0x200, writing 0x20b)
>[176158.537634] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x8 (was 0x1, writing 0x1841)
>[176158.537634] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800005)
>[176158.544009] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
>[176158.556009] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
>[176158.561638] uhci_hcd 0000:00:1d.2: restoring config space at offset 0xf (was 0x300, writing 0x30b)
>[176158.561638] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x8 (was 0x1, writing 0x1861)
>[176158.561638] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800005)
>[176158.561638] uhci_hcd 0000:00:1d.3: restoring config space at offset 0xf (was 0x400, writing 0x40b)
>[176158.561638] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x8 (was 0x1, writing 0x1881)
>[176158.561638] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800005)
>[176158.561638] ehci_hcd 0000:00:1d.7: restoring config space at offset 0xf (was 0x400, writing 0x40b)
>[176158.561638] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x4 (was 0x0, writing 0xa0040000)
>[176158.561638] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900106)
>[176158.568008] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
>[176158.580008] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
>[176158.585479] Intel ICH 0000:00:1e.2: restoring config space at offset 0x1 (was 0x2900007, writing 0x2900003)
>[176158.585479] pci 0000:00:1e.3: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
>[176158.585479] tg3 0000:02:00.0: restoring config space at offset 0xc (was 0x0, writing 0xfc9e0000)
>[176158.585479] tg3 0000:02:00.0: restoring config space at offset 0x1 (was 0x100102, writing 0x100106)
>[176158.600011] sdhci-pci 0000:04:00.1: BAR 0: set to [mem 0xa0201000-0xa02010ff] (PCI address [0xa0201000-0xa02010ff]
>[176158.605423] sdhci-pci 0000:04:00.1: restoring config space at offset 0x3 (was 0x800000, writing 0x804000)
>[176158.605423] sdhci-pci 0000:04:00.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106)
>[176158.605423] PM: early resume of devices complete after 177.490 msecs
>[176158.616009] i915 0000:00:02.0: setting latency timer to 64
>[176158.616009] i915_restore_display(): BLC_PWM_CTL=6c676c66
>[176158.624175] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[176158.624175] usb usb2: root hub lost power or was reset
>[176158.629752] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[176158.629752] usb usb3: root hub lost power or was reset
>[176158.635277] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[176158.635277] usb usb4: root hub lost power or was reset
>[176158.641456] uhci_hcd 0000:00:1d.3: setting latency timer to 64
>[176158.641456] usb usb5: root hub lost power or was reset
>[176158.647032] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[176158.647032] pci 0000:00:1e.0: setting latency timer to 64
>[176158.647032] Intel ICH 0000:00:1e.2: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>[176158.652691] ata_piix 0000:00:1f.2: setting latency timer to 64
>[176158.656010] pcieport 0000:00:1c.0: wake-up capability disabled by ACPI
>[176158.661449] sdhci-pci 0000:04:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>[176158.668008] i915_restore_display(): BLC_PWM_CTL:6c676c66
>[176158.677137] wlan0: Coming out of suspend...
>[176158.682632] sd 0:0:0:0: [sda] Starting disk
>[176158.688152] Intel ICH 0000:00:1e.2: setting latency timer to 64
>[176158.688152] tg3 0000:02:00.0: PME# disabled
>[176158.840006] lbam=00 lbah=00
>[176158.848948] sdhci-pci 0000:04:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[176158.854503] ipw2200 0000:04:02.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
>[176158.860166] render error detected, EIR: 0x00000010
>[176158.860166] page table error
>[176158.860166]   PGTBL_ER: 0x00000001
>[176158.860166] [drm:i915_report_and_clear_eir] *ERROR* EIR stuck: 0x00000010, masking
>[176158.860166] render error detected, EIR: 0x00000010
>[176158.860166] page table error
>[176158.860166]   PGTBL_ER: 0x00000001
>[176158.899645] lbam=00 lbah=00
>[176158.928008] serial 00:0a: activated
>[176160.832160] lbam=00 lbah=00
>[176160.837518] lbam=00 lbah=00
>[176160.848797] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[176160.848797] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[176160.854213] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
>[176160.859668] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
>[176160.865316] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
>[176160.888652] ata1.00: configured for UDMA/100
>[176160.916658] ata1.00: configured for UDMA/100
>[176160.922061] ata1: EH complete
>[176161.092096] PM: resume of devices complete after 2480.908 msecs
>[176161.097498] Restarting tasks ... 
>[176161.097498] hub 3-0:1.0: over-current change on port 1
>[176161.152011] done.
>[176161.220009] video LNXVIDEO:00: Restoring backlight state
>[176161.260009] [drm] Manually setting wedged to 0
>[176161.328241] hub 3-0:1.0: over-current change on port 2
>[176430.792009] mmc0: new high speed SD card at address 0002
>[176430.796016] mmcblk0: mmc0:0002 00000 1.88 GiB 
>[176430.796016]  mmcblk0: p1
>[179238.016027] mmc0: card 0002 removed
>[199110.972008] PM: Syncing filesystems ... done.
>[199111.060008] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[199111.076025] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[199111.117708] serial 00:0a: disabled
>[199111.121218] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[199111.124805] wlan0: Going into suspend...
>[199111.128267] ACPI handle has no context!
>[199111.128267] sdhci-pci 0000:04:00.1: PCI INT B disabled
>[199111.272008] sd 0:0:0:0: [sda] Stopping disk
>[199111.277859] ipw2200 0000:04:02.0: PCI INT A disabled
>[199111.281268] Intel ICH 0000:00:1e.2: PCI INT A disabled
>[199111.284925] ACPI handle has no context!
>[199111.284925] ACPI handle has no context!
>[199111.284925] i915_save_display(): BLC_PWM_CTL:6c676c66
>[199111.304008] i915 0000:00:02.0: power state changed by ACPI to D3
>[199111.460007] tg3 0000:02:00.0: PME# enabled
>[199111.460007] pcieport 0000:00:1c.0: wake-up capability enabled by ACPI
>[199111.808009] PM: suspend of devices complete after 712.594 msecs
>[199111.880008] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3
>[199111.944008] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D3
>[199112.116009] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D3
>[199112.161014] PM: late suspend of devices complete after 308.472 msecs
>[199112.244010] ACPI: Preparing to enter system sleep state S3
>[199112.616008] Extended CMOS year: 2000
>[199112.616008] Back to C!
>[199112.616008] Extended CMOS year: 2000
>[199112.616008] Force enabled HPET at resume
>[199112.661542] ACPI: Waking up from system sleep state S3
>[199113.176008] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900003, writing 0x900007)
>[199113.176008] pci 0000:00:02.1: restoring config space at offset 0x4 (was 0x0, writing 0x60200000)
>[199113.176008] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x1fff1, writing 0x60116001)
>[199113.176008] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0xf0, writing 0x7070)
>[199113.176008] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
>[199113.220009] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[199113.232008] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[199113.237571] uhci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
>[199113.237571] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x8 (was 0x1, writing 0x1821)
>[199113.237571] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800005)
>[199113.244009] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[199113.256009] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[199113.268010] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
>[199113.280008] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
>[199113.285572] uhci_hcd 0000:00:1d.1: restoring config space at offset 0xf (was 0x200, writing 0x20b)
>[199113.285572] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x8 (was 0x1, writing 0x1841)
>[199113.285572] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800005)
>[199113.292008] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
>[199113.304008] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
>[199113.309573] uhci_hcd 0000:00:1d.2: restoring config space at offset 0xf (was 0x300, writing 0x30b)
>[199113.309573] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x8 (was 0x1, writing 0x1861)
>[199113.309573] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800005)
>[199113.309573] uhci_hcd 0000:00:1d.3: restoring config space at offset 0xf (was 0x400, writing 0x40b)
>[199113.309573] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x8 (was 0x1, writing 0x1881)
>[199113.309573] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800005)
>[199113.309573] ehci_hcd 0000:00:1d.7: restoring config space at offset 0xf (was 0x400, writing 0x40b)
>[199113.309573] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x4 (was 0x0, writing 0xa0040000)
>[199113.309573] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900106)
>[199113.316009] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
>[199113.328009] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
>[199113.333417] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22806030, writing 0xa2806030)
>[199113.333417] Intel ICH 0000:00:1e.2: restoring config space at offset 0x1 (was 0x2900007, writing 0x2900003)
>[199113.333417] pci 0000:00:1e.3: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
>[199113.333417] tg3 0000:02:00.0: restoring config space at offset 0xc (was 0x0, writing 0xfc9e0000)
>[199113.333417] tg3 0000:02:00.0: restoring config space at offset 0x1 (was 0x100102, writing 0x100106)
>[199113.348010] sdhci-pci 0000:04:00.1: BAR 0: set to [mem 0xa0201000-0xa02010ff] (PCI address [0xa0201000-0xa02010ff]
>[199113.353361] sdhci-pci 0000:04:00.1: restoring config space at offset 0x3 (was 0x800000, writing 0x804000)
>[199113.353361] sdhci-pci 0000:04:00.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106)
>[199113.353361] PM: early resume of devices complete after 177.412 msecs
>[199113.364018] i915 0000:00:02.0: setting latency timer to 64
>[199113.364018] i915_restore_display(): BLC_PWM_CTL=00000000
>[199113.370274] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[199113.370274] usb usb2: root hub lost power or was reset
>[199113.376107] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[199113.376107] usb usb3: root hub lost power or was reset
>[199113.381571] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[199113.381571] usb usb4: root hub lost power or was reset
>[199113.388007] uhci_hcd 0000:00:1d.3: setting latency timer to 64
>[199113.388007] usb usb5: root hub lost power or was reset
>[199113.393825] i915_restore_display(): BLC_PWM_CTL:00000000
>[199113.399061] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[199113.399061] pci 0000:00:1e.0: setting latency timer to 64
>[199113.399061] Intel ICH 0000:00:1e.2: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>[199113.404449] ata_piix 0000:00:1f.2: setting latency timer to 64
>[199113.408009] pcieport 0000:00:1c.0: wake-up capability disabled by ACPI
>[199113.413342] sdhci-pci 0000:04:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>[199113.418692] wlan0: Coming out of suspend...
>[199113.424049] sd 0:0:0:0: [sda] Starting disk
>[199113.432913] Intel ICH 0000:00:1e.2: setting latency timer to 64
>[199113.432913] tg3 0000:02:00.0: PME# disabled
>[199113.588007] lbam=00 lbah=00
>[199113.593244] render error detected, EIR: 0x00000010
>[199113.593244] page table error
>[199113.593244]   PGTBL_ER: 0x00000001
>[199113.593244] [drm:i915_report_and_clear_eir] *ERROR* EIR stuck: 0x00000010, masking
>[199113.593244] render error detected, EIR: 0x00000010
>[199113.593244] page table error
>[199113.593244]   PGTBL_ER: 0x00000001
>[199113.629400] sdhci-pci 0000:04:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[199113.634739] ipw2200 0000:04:02.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
>[199113.640084] lbam=00 lbah=00
>[199113.680013] serial 00:0a: activated
>[199115.488057] lbam=00 lbah=00
>[199115.493437] lbam=00 lbah=00
>[199115.504610] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[199115.504610] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[199115.510046] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
>[199115.515506] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
>[199115.521040] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
>[199115.544400] ata1.00: configured for UDMA/100
>[199115.572448] ata1.00: configured for UDMA/100
>[199115.577872] ata1: EH complete
>[199115.734208] PM: resume of devices complete after 2375.158 msecs
>[199115.739634] Restarting tasks ... 
>[199115.739634] hub 3-0:1.0: over-current change on port 1
>[199115.772014] done.
>[199115.816009] video LNXVIDEO:00: Restoring backlight state
>[199115.844016] [drm] Manually setting wedged to 0
>[199115.920010] hub 3-0:1.0: over-current change on port 2

Actions: View

Attachments on bug 26744: 33545 | 33546 | 33547 | 33577 | 33578 | 34097 | 34388 | 34389 | 36019 | 37360 | 37367 | 37381

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.