Attachment 40337 Details for Bug 31681 – dmesg output

dmesg output

dmesg (text/plain), 40.34 KB, created by Nils Kneuper on 2010-11-17 06:53:35 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Nils Kneuper

Created: 2010-11-17 06:53:35 UTC

Size: 40.34 KB

patch

obsolete

>Linux version 2.6.36 (root@rechner1) (gcc version 4.4.5 (Gentoo 4.4.5 p1.0, pie-0.4.5) ) #4 SMP Sun Nov 7 23:49:15 CET 2010
>Command line: root=/dev/sda5 usbhid.mousepoll=2
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 0000000000098800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000cfcf0000 (usable)
> BIOS-e820: 00000000cfcf0000 - 00000000cfcf1000 (ACPI NVS)
> BIOS-e820: 00000000cfcf1000 - 00000000cfd00000 (ACPI data)
> BIOS-e820: 00000000cfd00000 - 00000000cfe00000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
> BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
>NX (Execute Disable) protection: active
>DMI 2.4 present.
>e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
>e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
>No AGP bridge found
>last_pfn = 0x130000 max_arch_pfn = 0x400000000
>MTRR default type: uncachable
>MTRR fixed ranges enabled:
>  00000-9FFFF write-back
>  A0000-BFFFF uncachable
>  C0000-C7FFF write-protect
>  C8000-FFFFF uncachable
>MTRR variable ranges enabled:
>  0 base 000000000000 mask FFFF80000000 write-back
>  1 base 000080000000 mask FFFFC0000000 write-back
>  2 base 0000C0000000 mask FFFFF0000000 write-back
>  3 base 0000CFD00000 mask FFFFFFF00000 uncachable
>  4 base 0000CFE00000 mask FFFFFFE00000 uncachable
>  5 base 000100000000 mask FFFFE0000000 write-back
>  6 base 000120000000 mask FFFFF0000000 write-back
>  7 disabled
>TOM2: 0000000130000000 aka 4864M
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>e820 update range: 00000000cfd00000 - 0000000100000000 (usable) ==> (reserved)
>last_pfn = 0xcfcf0 max_arch_pfn = 0x400000000
>initial memory mapped : 0 - 20000000
>Using GB pages for direct mapping
>init_memory_mapping: 0000000000000000-00000000cfcf0000
> 0000000000 - 00c0000000 page 1G
> 00c0000000 - 00cfc00000 page 2M
> 00cfc00000 - 00cfcf0000 page 4k
>kernel direct mapping tables up to cfcf0000 @ 8000-b000
>init_memory_mapping: 0000000100000000-0000000130000000
> 0100000000 - 0130000000 page 2M
>kernel direct mapping tables up to 130000000 @ a000-c000
>ACPI: RSDP 00000000000f5c40 00014 (v00 GBT   )
>ACPI: RSDT 00000000cfcf1000 0003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
>ACPI: FACP 00000000cfcf1040 00074 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
>ACPI: DSDT 00000000cfcf10c0 079C7 (v01 GBT    GBTUACPI 00001000 MSFT 03000000)
>ACPI: FACS 00000000cfcf0000 00040
>ACPI: SSDT 00000000cfcf8b80 00EDC (v01 PTLTD  POWERNOW 00000001  LTP 00000001)
>ACPI: HPET 00000000cfcf9a80 00038 (v01 GBT    GBTUACPI 42302E31 GBTU 00000098)
>ACPI: MCFG 00000000cfcf9ac0 0003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
>ACPI: MATS 00000000cfcf9b00 00034 (v01 GBT             00000000      00000000)
>ACPI: APIC 00000000cfcf8ac0 000BC (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
>ACPI: Local APIC address 0xfee00000
>Zone PFN ranges:
>  DMA      0x00000001 -> 0x00001000
>  DMA32    0x00001000 -> 0x00100000
>  Normal   0x00100000 -> 0x00130000
>Movable zone start PFN for each node
>early_node_map[3] active PFN ranges
>    0: 0x00000001 -> 0x00000098
>    0: 0x00000100 -> 0x000cfcf0
>    0: 0x00100000 -> 0x00130000
>On node 0 totalpages: 1047687
>  DMA zone: 56 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 3935 pages, LIFO batch:0
>  DMA32 zone: 14280 pages used for memmap
>  DMA32 zone: 832808 pages, LIFO batch:31
>  Normal zone: 2688 pages used for memmap
>  Normal zone: 193920 pages, LIFO batch:31
>ACPI: PM-Timer IO Port: 0x4008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
>ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
>ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
>ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Using ACPI (MADT) for SMP configuration information
>ACPI: HPET id: 0x10b9a201 base: 0xfed00000
>SMP: Allowing 6 CPUs, 0 hotplug CPUs
>nr_irqs_gsi: 40
>Allocating PCI resources starting at cfe00000 (gap: cfe00000:10200000)
>early_res array is doubled to 64 at [3000 - 37ff]
>setup_percpu: NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:6 nr_node_ids:1
>PERCPU: Embedded 26 pages/cpu @ffff880001800000 s77248 r8192 d21056 u262144
>pcpu-alloc: s77248 r8192 d21056 u262144 alloc=1*2097152
>pcpu-alloc: [0] 0 1 2 3 4 5 - - 
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1030663
>Kernel command line: root=/dev/sda5 usbhid.mousepoll=2
>PID hash table entries: 4096 (order: 3, 32768 bytes)
>Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
>Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Checking aperture...
>No AGP bridge found
>Node 0: aperture @ 20000000 size 32 MB
>Aperture pointing to e820 RAM. Ignoring.
>Your BIOS doesn't leave a aperture memory hole
>Please enable the IOMMU option in the BIOS setup
>This costs you 64 MB of RAM
>Mapping aperture over 65536 KB of RAM @ 20000000
>Subtract (50 early reservations)
>  #1 [0001000000 - 0001746018]   TEXT DATA BSS
>  #2 [0000098800 - 0000100000]   BIOS reserved
>  #3 [0001747000 - 00017470f6]             BRK
>  #4 [0000001000 - 0000003000]      TRAMPOLINE
>  #5 [0000008000 - 000000a000]         PGTABLE
>  #6 [000000a000 - 000000b000]         PGTABLE
>  #7 [0001747100 - 0001748100]         BOOTMEM
>  #8 [0001746040 - 0001746240]         BOOTMEM
>  #9 [0001f49000 - 0005749000]         BOOTMEM
>  #10 [0001746240 - 00017463c0]         BOOTMEM
>  #11 [0001748100 - 0001760100]         BOOTMEM
>  #12 [0001760100 - 0001766100]         BOOTMEM
>  #13 [0001767000 - 0001768000]         BOOTMEM
>  #14 [00017463c0 - 0001746401]         BOOTMEM
>  #15 [0001746440 - 0001746483]         BOOTMEM
>  #16 [00017464c0 - 0001746728]         BOOTMEM
>  #17 [0001746740 - 00017467a8]         BOOTMEM
>  #18 [00017467c0 - 0001746828]         BOOTMEM
>  #19 [0001746840 - 00017468a8]         BOOTMEM
>  #20 [00017468c0 - 0001746928]         BOOTMEM
>  #21 [0001746940 - 00017469a8]         BOOTMEM
>  #22 [00017469c0 - 0001746a28]         BOOTMEM
>  #23 [0001746a40 - 0001746aa8]         BOOTMEM
>  #24 [0001746ac0 - 0001746b28]         BOOTMEM
>  #25 [0001746b40 - 0001746ba8]         BOOTMEM
>  #26 [0001746bc0 - 0001746c28]         BOOTMEM
>  #27 [0001746c40 - 0001746c62]         BOOTMEM
>  #28 [0001746c80 - 0001746ca2]         BOOTMEM
>  #29 [0001800000 - 000181a000]         BOOTMEM
>  #30 [0001840000 - 000185a000]         BOOTMEM
>  #31 [0001880000 - 000189a000]         BOOTMEM
>  #32 [00018c0000 - 00018da000]         BOOTMEM
>  #33 [0001900000 - 000191a000]         BOOTMEM
>  #34 [0001940000 - 000195a000]         BOOTMEM
>  #35 [0001746cc0 - 0001746cc8]         BOOTMEM
>  #36 [0001746d00 - 0001746d08]         BOOTMEM
>  #37 [0001746d40 - 0001746d58]         BOOTMEM
>  #38 [0001746d80 - 0001746db0]         BOOTMEM
>  #39 [0001746dc0 - 0001746ee0]         BOOTMEM
>  #40 [0001746f00 - 0001746f48]         BOOTMEM
>  #41 [0001746f80 - 0001746fc8]         BOOTMEM
>  #42 [0001768000 - 0001770000]         BOOTMEM
>  #43 [000195a000 - 0001d5a000]         BOOTMEM
>  #44 [0005749000 - 0005949000]         BOOTMEM
>  #45 [0020000000 - 0024000000]         BOOTMEM
>  #46 [0005949000 - 0009949000]         BOOTMEM
>  #47 [0001770000 - 0001790000]         BOOTMEM
>  #48 [0001790000 - 00017d0000]         BOOTMEM
>  #49 [000000b000 - 0000013000]         BOOTMEM
>Memory: 3987512k/4980736k available (3528k kernel code, 789988k absent, 203236k reserved, 3009k data, 448k init)
>Hierarchical RCU implementation.
>	RCU-based detection of stalled CPUs is disabled.
>	Verbose stalled-CPUs detection is disabled.
>NR_IRQS:768
>Console: colour VGA+ 80x25
>console [tty0] enabled
>hpet clockevent registered
>Fast TSC calibration using PIT
>Detected 3315.034 MHz processor.
>Calibrating delay loop (skipped), value calculated using timer frequency.. 5625.50 BogoMIPS (lpj=2812753)
>pid_max: default: 32768 minimum: 301
>Mount-cache hash table entries: 256
>tseg: 00cfe00000
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>mce: CPU supports 6 MCE banks
>Performance Events: AMD PMU driver.
>... version:                0
>... bit width:              48
>... generic registers:      4
>... value mask:             0000ffffffffffff
>... max period:             00007fffffffffff
>... fixed-purpose events:   0
>... event mask:             000000000000000f
>Freeing SMP alternatives: 16k freed
>ACPI: Core revision 20100702
>Setting APIC routing to flat
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>CPU0: AMD Phenom(tm) II X6 1055T Processor stepping 00
>Booting Node   0, Processors  #1 #2 #3 #4 #5 Ok.
>Brought up 6 CPUs
>Total of 6 processors activated (33752.71 BogoMIPS).
>NET: Registered protocol family 16
>node 0 link 0: io port [a000, ffff]
>TOM: 00000000d0000000 aka 3328M
>Fam 10h mmconf [e0000000, e00fffff]
>node 0 link 0: mmio [a0000, bffff]
>node 0 link 0: mmio [d0000000, dfffffff]
>node 0 link 0: mmio [f0000000, fe02ffff]
>node 0 link 0: mmio [e0000000, e05fffff] ==> [e0100000, e05fffff]
>TOM2: 0000000130000000 aka 4864M
>bus: [00, 05] on node 0 link 0
>bus: 00 index 0 [io  0x0000-0xffff]
>bus: 00 index 1 [mem 0x000a0000-0x000bffff]
>bus: 00 index 2 [mem 0xd0000000-0xdfffffff]
>bus: 00 index 3 [mem 0xe0600000-0xffffffff]
>bus: 00 index 4 [mem 0xe0100000-0xe05fffff]
>bus: 00 index 5 [mem 0x130000000-0xfcffffffff]
>ACPI: bus type pci registered
>PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
>PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
>PCI: Using configuration type 1 for base access
>bio: create slab <bio-0> at 0
>ACPI: EC: Look up EC in DSDT
>ACPI: Actual Package length (1) is larger than NumElements field (0), truncated
>
>ACPI: Actual Package length (1) is larger than NumElements field (0), truncated
>
>ACPI: Actual Package length (1) is larger than NumElements field (0), truncated
>
>ACPI: Actual Package length (1) is larger than NumElements field (0), truncated
>
>ACPI: Interpreter enabled
>ACPI: (supports S0 S5)
>ACPI: Using IOAPIC for interrupt routing
>PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
>pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7]
>pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff]
>pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
>pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
>pci_root PNP0A03:00: host bridge window [mem 0xcff00000-0xfebfffff]
>pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit]
>pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:02.0: PME# disabled
>pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:09.0: PME# disabled
>pci 0000:00:11.0: reg 10: [io  0xff00-0xff07]
>pci 0000:00:11.0: reg 14: [io  0xfe00-0xfe03]
>pci 0000:00:11.0: reg 18: [io  0xfd00-0xfd07]
>pci 0000:00:11.0: reg 1c: [io  0xfc00-0xfc03]
>pci 0000:00:11.0: reg 20: [io  0xfb00-0xfb0f]
>pci 0000:00:11.0: reg 24: [mem 0xfe02f000-0xfe02f3ff]
>pci 0000:00:12.0: reg 10: [mem 0xfe02e000-0xfe02efff]
>pci 0000:00:12.2: reg 10: [mem 0xfe02d000-0xfe02d0ff]
>pci 0000:00:12.2: supports D1 D2
>pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
>pci 0000:00:12.2: PME# disabled
>pci 0000:00:13.0: reg 10: [mem 0xfe02c000-0xfe02cfff]
>pci 0000:00:13.2: reg 10: [mem 0xfe02b000-0xfe02b0ff]
>pci 0000:00:13.2: supports D1 D2
>pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
>pci 0000:00:13.2: PME# disabled
>pci 0000:00:14.2: reg 10: [mem 0xfe024000-0xfe027fff 64bit]
>pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
>pci 0000:00:14.2: PME# disabled
>pci 0000:00:14.5: reg 10: [mem 0xfe02a000-0xfe02afff]
>pci 0000:00:15.0: supports D1 D2
>pci 0000:00:15.1: supports D1 D2
>pci 0000:00:16.0: reg 10: [mem 0xfe029000-0xfe029fff]
>pci 0000:00:16.2: reg 10: [mem 0xfe028000-0xfe0280ff]
>pci 0000:00:16.2: supports D1 D2
>pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
>pci 0000:00:16.2: PME# disabled
>pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
>pci 0000:01:00.0: reg 18: [mem 0xfddc0000-0xfdddffff 64bit]
>pci 0000:01:00.0: reg 20: [io  0xde00-0xdeff]
>pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
>pci 0000:01:00.0: supports D1 D2
>pci 0000:01:00.1: reg 10: [mem 0xfddfc000-0xfddfffff 64bit]
>pci 0000:01:00.1: supports D1 D2
>pci 0000:00:02.0: PCI bridge to [bus 01-01]
>pci 0000:00:02.0:   bridge window [io  0xd000-0xdfff]
>pci 0000:00:02.0:   bridge window [mem 0xfdd00000-0xfddfffff]
>pci 0000:00:02.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
>pci 0000:02:00.0: reg 10: [mem 0xfd8fe000-0xfd8fffff 64bit]
>pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
>pci 0000:02:00.0: PME# disabled
>pci 0000:00:09.0: PCI bridge to [bus 02-02]
>pci 0000:00:09.0:   bridge window [io  0xe000-0xefff]
>pci 0000:00:09.0:   bridge window [mem 0xfd800000-0xfd8fffff]
>pci 0000:00:09.0:   bridge window [mem 0xfd700000-0xfd7fffff 64bit pref]
>pci 0000:03:07.0: reg 10: [mem 0xfdeff000-0xfdefffff pref]
>pci 0000:03:08.0: reg 10: [mem 0xfdfff000-0xfdfff3ff]
>pci 0000:03:08.0: supports D1 D2
>pci 0000:03:0e.0: reg 10: [mem 0xfdffe000-0xfdffe7ff]
>pci 0000:03:0e.0: reg 14: [mem 0xfdff8000-0xfdffbfff]
>pci 0000:03:0e.0: supports D1 D2
>pci 0000:03:0e.0: PME# supported from D0 D1 D2 D3hot
>pci 0000:03:0e.0: PME# disabled
>pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive decode)
>pci 0000:00:14.4:   bridge window [io  0xc000-0xcfff]
>pci 0000:00:14.4:   bridge window [mem 0xfdf00000-0xfdffffff]
>pci 0000:00:14.4:   bridge window [mem 0xfde00000-0xfdefffff pref]
>pci 0000:00:14.4:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
>pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff] (subtractive decode)
>pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
>pci 0000:00:14.4:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
>pci 0000:00:14.4:   bridge window [mem 0xcff00000-0xfebfffff] (subtractive decode)
>pci 0000:00:15.0: PCI bridge to [bus 04-04]
>pci 0000:00:15.0:   bridge window [io  0xb000-0xbfff]
>pci 0000:00:15.0:   bridge window [mem 0xfdc00000-0xfdcfffff]
>pci 0000:00:15.0:   bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
>pci 0000:05:00.0: reg 10: [io  0xae00-0xaeff]
>pci 0000:05:00.0: reg 18: [mem 0xfd9ff000-0xfd9fffff 64bit pref]
>pci 0000:05:00.0: reg 20: [mem 0xfd9f8000-0xfd9fbfff 64bit pref]
>pci 0000:05:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
>pci 0000:05:00.0: supports D1 D2
>pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:05:00.0: PME# disabled
>pci 0000:00:15.1: PCI bridge to [bus 05-05]
>pci 0000:00:15.1:   bridge window [io  0xa000-0xafff]
>pci 0000:00:15.1:   bridge window [mem 0xfda00000-0xfdafffff]
>pci 0000:00:15.1:   bridge window [mem 0xfd900000-0xfd9fffff 64bit pref]
>pci_bus 0000:00: on NUMA node 0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE9._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0
>ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0
>ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0
>vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
>vgaarb: loaded
>SCSI subsystem initialized
>libata version 3.00 loaded.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: pci_cache_line_size set to 64 bytes
>pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit]
>reserve RAM buffer: 0000000000098800 - 000000000009ffff 
>reserve RAM buffer: 00000000cfcf0000 - 00000000cfffffff 
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 comparators, 32-bit 14.318180 MHz counter
>Switching to clocksource tsc
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp 00:02: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
>pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
>pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:05:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
>pnp 00:08: disabling [mem 0x000d4200-0x000d7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
>pnp 00:08: disabling [mem 0x000f0000-0x000f7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
>pnp 00:08: disabling [mem 0x000f8000-0x000fbfff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
>pnp 00:08: disabling [mem 0x000fc000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
>pnp 00:08: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
>pnp 00:08: disabling [mem 0x00100000-0xcfceffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
>pnp: PnP ACPI: found 9 devices
>ACPI: ACPI bus type pnp unregistered
>system 00:01: [io  0x04d0-0x04d1] has been reserved
>system 00:01: [io  0x0220-0x0225] has been reserved
>system 00:01: [io  0x0290-0x0294] has been reserved
>system 00:02: [io  0x4100-0x411f] has been reserved
>system 00:02: [io  0x0228-0x022f] has been reserved
>system 00:02: [io  0x040b] has been reserved
>system 00:02: [io  0x04d6] has been reserved
>system 00:02: [io  0x0c00-0x0c01] has been reserved
>system 00:02: [io  0x0c14] has been reserved
>system 00:02: [io  0x0c50-0x0c52] has been reserved
>system 00:02: [io  0x0c6c-0x0c6d] has been reserved
>system 00:02: [io  0x0c6f] has been reserved
>system 00:02: [io  0x0cd0-0x0cd1] has been reserved
>system 00:02: [io  0x0cd2-0x0cd3] has been reserved
>system 00:02: [io  0x0cd4-0x0cdf] has been reserved
>system 00:02: [io  0x4000-0x40fe] has been reserved
>system 00:02: [io  0x4210-0x4217] has been reserved
>system 00:02: [io  0x0b00-0x0b0f] has been reserved
>system 00:02: [io  0x0b10-0x0b1f] has been reserved
>system 00:02: [io  0x0b20-0x0b3f] has been reserved
>system 00:02: [mem 0xfee00400-0xfee00fff window] has been reserved
>system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
>system 00:08: [mem 0xcfcf0000-0xcfcfffff] could not be reserved
>system 00:08: [mem 0xffff0000-0xffffffff] has been reserved
>system 00:08: [mem 0xcfd00000-0xcfdfffff] has been reserved
>system 00:08: [mem 0xcfe00000-0xcfefffff] could not be reserved
>system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
>system 00:08: [mem 0xfee00000-0xfee00fff] could not be reserved
>system 00:08: [mem 0xfff80000-0xfffeffff] has been reserved
>pci 0000:01:00.0: BAR 6: assigned [mem 0xfdd00000-0xfdd1ffff pref]
>pci 0000:00:02.0: PCI bridge to [bus 01-01]
>pci 0000:00:02.0:   bridge window [io  0xd000-0xdfff]
>pci 0000:00:02.0:   bridge window [mem 0xfdd00000-0xfddfffff]
>pci 0000:00:02.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
>pci 0000:00:09.0: PCI bridge to [bus 02-02]
>pci 0000:00:09.0:   bridge window [io  0xe000-0xefff]
>pci 0000:00:09.0:   bridge window [mem 0xfd800000-0xfd8fffff]
>pci 0000:00:09.0:   bridge window [mem 0xfd700000-0xfd7fffff 64bit pref]
>pci 0000:00:14.4: PCI bridge to [bus 03-03]
>pci 0000:00:14.4:   bridge window [io  0xc000-0xcfff]
>pci 0000:00:14.4:   bridge window [mem 0xfdf00000-0xfdffffff]
>pci 0000:00:14.4:   bridge window [mem 0xfde00000-0xfdefffff pref]
>pci 0000:00:15.0: PCI bridge to [bus 04-04]
>pci 0000:00:15.0:   bridge window [io  0xb000-0xbfff]
>pci 0000:00:15.0:   bridge window [mem 0xfdc00000-0xfdcfffff]
>pci 0000:00:15.0:   bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
>pci 0000:05:00.0: BAR 6: assigned [mem 0xfd900000-0xfd91ffff pref]
>pci 0000:00:15.1: PCI bridge to [bus 05-05]
>pci 0000:00:15.1:   bridge window [io  0xa000-0xafff]
>pci 0000:00:15.1:   bridge window [mem 0xfda00000-0xfdafffff]
>pci 0000:00:15.1:   bridge window [mem 0xfd900000-0xfd9fffff 64bit pref]
>pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>pci 0000:00:02.0: setting latency timer to 64
>pci 0000:00:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>pci 0000:00:09.0: setting latency timer to 64
>pci 0000:00:15.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>pci 0000:00:15.0: setting latency timer to 64
>pci 0000:00:15.1: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>pci 0000:00:15.1: setting latency timer to 64
>pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
>pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
>pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
>pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
>pci_bus 0000:00: resource 8 [mem 0xcff00000-0xfebfffff]
>pci_bus 0000:01: resource 0 [io  0xd000-0xdfff]
>pci_bus 0000:01: resource 1 [mem 0xfdd00000-0xfddfffff]
>pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
>pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
>pci_bus 0000:02: resource 1 [mem 0xfd800000-0xfd8fffff]
>pci_bus 0000:02: resource 2 [mem 0xfd700000-0xfd7fffff 64bit pref]
>pci_bus 0000:03: resource 0 [io  0xc000-0xcfff]
>pci_bus 0000:03: resource 1 [mem 0xfdf00000-0xfdffffff]
>pci_bus 0000:03: resource 2 [mem 0xfde00000-0xfdefffff pref]
>pci_bus 0000:03: resource 4 [io  0x0000-0x0cf7]
>pci_bus 0000:03: resource 5 [io  0x0d00-0xffff]
>pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
>pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000dffff]
>pci_bus 0000:03: resource 8 [mem 0xcff00000-0xfebfffff]
>pci_bus 0000:04: resource 0 [io  0xb000-0xbfff]
>pci_bus 0000:04: resource 1 [mem 0xfdc00000-0xfdcfffff]
>pci_bus 0000:04: resource 2 [mem 0xfdb00000-0xfdbfffff 64bit pref]
>pci_bus 0000:05: resource 0 [io  0xa000-0xafff]
>pci_bus 0000:05: resource 1 [mem 0xfda00000-0xfdafffff]
>pci_bus 0000:05: resource 2 [mem 0xfd900000-0xfd9fffff 64bit pref]
>NET: Registered protocol family 2
>IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 262144 bind 65536)
>TCP reno registered
>UDP hash table entries: 2048 (order: 4, 65536 bytes)
>UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
>NET: Registered protocol family 1
>pci 0000:01:00.0: Boot video device
>PCI: CLS 64 bytes, default 64
>PCI-DMA: Disabling AGP.
>PCI-DMA: aperture base @ 20000000 size 65536 KB
>PCI-DMA: using GART IOMMU.
>PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
>msgmni has been set to 7916
>io scheduler noop registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>ACPI: acpi_idle registered with cpuidle
>Real Time Clock Driver v1.12b
>Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds).
>Hangcheck: Using getrawmonotonic().
>floppy0: no floppy controllers found
>ahci 0000:00:11.0: version 3.0
>ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
>ahci 0000:00:11.0: irq 40 for MSI/MSI-X
>ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
>ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part 
>scsi0 : ahci
>scsi1 : ahci
>scsi2 : ahci
>scsi3 : ahci
>scsi4 : ahci
>scsi5 : ahci
>ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 40
>ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 40
>ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 40
>ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 40
>ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f300 irq 40
>ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f380 irq 40
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>ehci_hcd 0000:00:12.2: EHCI Host Controller
>ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:12.2: debug port 1
>ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe02d000
>ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 5 ports detected
>ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>ehci_hcd 0000:00:13.2: EHCI Host Controller
>ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:13.2: debug port 1
>ehci_hcd 0000:00:13.2: irq 17, io mem 0xfe02b000
>ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 5 ports detected
>ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>ehci_hcd 0000:00:16.2: EHCI Host Controller
>ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3
>ehci_hcd 0000:00:16.2: debug port 1
>ehci_hcd 0000:00:16.2: irq 17, io mem 0xfe028000
>ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 4 ports detected
>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>ohci_hcd 0000:00:12.0: OHCI Host Controller
>ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4
>ohci_hcd 0000:00:12.0: irq 18, io mem 0xfe02e000
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 5 ports detected
>ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>ohci_hcd 0000:00:13.0: OHCI Host Controller
>ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
>ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe02c000
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 5 ports detected
>ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>ohci_hcd 0000:00:14.5: OHCI Host Controller
>ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 6
>ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe02a000
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 2 ports detected
>ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>ohci_hcd 0000:00:16.0: OHCI Host Controller
>ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 7
>ohci_hcd 0000:00:16.0: irq 18, io mem 0xfe029000
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 4 ports detected
>Initializing USB Mass Storage driver...
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>PNP: No PS/2 controller found. Probing ports directly.
>Failed to disable AUX port, but continuing anyway... Is this a SiS?
>If AUX port is really absent please use the 'i8042.noaux' option.
>ata4: SATA link down (SStatus 0 SControl 300)
>ata5: SATA link down (SStatus 0 SControl 300)
>ata6: SATA link down (SStatus 0 SControl 300)
>usb 1-3: new high speed USB device using ehci_hcd and address 2
>scsi6 : usb-storage 1-3:1.0
>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata3.00: ATAPI: TSSTcorp CDDVDW SH-S203B, SB00, max UDMA/100
>ata3.00: configured for UDMA/100
>ata2.00: ATA-8: SAMSUNG HD503HI, 1AJ10001, max UDMA/133
>ata2.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
>ata1.00: ATA-7: SAMSUNG HD103UJ, 1AA01109, max UDMA7
>ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
>ata2.00: configured for UDMA/133
>ata1.00: configured for UDMA/133
>scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG HD103UJ  1AA0 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>scsi 1:0:0:0: Direct-Access     ATA      SAMSUNG HD503HI  1AJ1 PQ: 0 ANSI: 5
>sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
>sd 1:0:0:0: Attached scsi generic sg1 type 0
>sd 1:0:0:0: [sdb] Write Protect is off
>sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>scsi 2:0:0:0: CD-ROM            TSSTcorp CDDVDW SH-S203B  SB00 PQ: 0 ANSI: 5
>sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>cdrom: Uniform CD-ROM driver Revision: 3.20
>sr 2:0:0:0: Attached scsi CD-ROM sr0
>sr 2:0:0:0: Attached scsi generic sg2 type 5
>serio: i8042 KBD port at 0x60,0x64 irq 1
>mice: PS/2 mouse device common for all mice
>i2c /dev entries driver
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver usbhid
>usbhid: USB HID core driver
>TCP cubic registered
>NET: Registered protocol family 17
>powernow-k8: Found 1 AMD Phenom(tm) II X6 1055T Processor (6 cpu cores) (version 2.20.00)
>powernow-k8: Core Performance Boosting: on.
>powernow-k8:    0 : pstate 0 (2800 MHz)
>powernow-k8:    1 : pstate 1 (2200 MHz)
>powernow-k8:    2 : pstate 2 (1500 MHz)
>powernow-k8:    3 : pstate 3 (800 MHz)
> sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 >
>sd 0:0:0:0: [sda] Attached SCSI disk
> sdb: sdb1 sdb2 sdb3 < sdb5 sdb6 sdb7 >
>sd 1:0:0:0: [sdb] Attached SCSI disk
>REISERFS (device sda5): found reiserfs format "3.6" with standard journal
>REISERFS (device sda5): using ordered data mode
>REISERFS (device sda5): journal params: device sda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>REISERFS (device sda5): checking transaction log (sda5)
>REISERFS (device sda5): Using r5 hash to sort names
>VFS: Mounted root (reiserfs filesystem) readonly on device 8:5.
>Freeing unused kernel memory: 448k freed
>Write protecting the kernel read-only data: 6144k
>Freeing unused kernel memory: 548k freed
>Freeing unused kernel memory: 936k freed
>usb 4-5: new full speed USB device using ohci_hcd and address 2
>usb 5-1: new full speed USB device using ohci_hcd and address 2
>scsi 6:0:0:0: Direct-Access     Generic  USB SD Reader    1.00 PQ: 0 ANSI: 0
>sd 6:0:0:0: Attached scsi generic sg3 type 0
>scsi 6:0:0:1: Direct-Access     Generic  USB CF Reader    1.01 PQ: 0 ANSI: 0
>sd 6:0:0:1: Attached scsi generic sg4 type 0
>sd 6:0:0:0: [sdc] Attached SCSI removable disk
>scsi 6:0:0:2: Direct-Access     Generic  USB SM Reader    1.02 PQ: 0 ANSI: 0
>sd 6:0:0:2: Attached scsi generic sg5 type 0
>sd 6:0:0:1: [sdd] Attached SCSI removable disk
>scsi 6:0:0:3: Direct-Access     Generic  USB MS Reader    1.03 PQ: 0 ANSI: 0
>sd 6:0:0:3: Attached scsi generic sg6 type 0
>sd 6:0:0:2: [sde] Attached SCSI removable disk
>sd 6:0:0:3: [sdf] Attached SCSI removable disk
>usb 7-3: new low speed USB device using ohci_hcd and address 2
>input: HID 046a:0023 as /devices/pci0000:00/0000:00:16.0/usb7/7-3/7-3:1.0/input/input0
>cherry 0003:046A:0023.0001: input: USB HID v1.11 Keyboard [HID 046a:0023] on usb-0000:00:16.0-3/input0
>input: HID 046a:0023 as /devices/pci0000:00/0000:00:16.0/usb7/7-3/7-3:1.1/input/input1
>cherry 0003:046A:0023.0002: input: USB HID v1.11 Device [HID 046a:0023] on usb-0000:00:16.0-3/input1
>usb 7-4: new full speed USB device using ohci_hcd and address 3
>input: Logitech USB Gaming Mouse as /devices/pci0000:00/0000:00:16.0/usb7/7-4/7-4:1.0/input/input2
>generic-usb 0003:046D:C049.0003: input: USB HID v1.11 Mouse [Logitech USB Gaming Mouse] on usb-0000:00:16.0-4/input0
>generic-usb 0003:046D:C049.0004: claimed by neither input, hiddev nor hidraw
>udev[831]: starting version 164
>r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
>r8169 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>r8169 0000:05:00.0: setting latency timer to 64
>r8169 0000:05:00.0: irq 41 for MSI/MSI-X
>r8169 0000:05:00.0: eth0: RTL8168d/8111d at 0xffffc9000007e000, 1c:6f:65:46:58:2a, XID 083000c0 IRQ 41
>IR NEC protocol handler initialized
>IR RC5(x) protocol handler initialized
>Linux video capture interface: v2.00
>IR RC6 protocol handler initialized
>[drm] Initialized drm 1.1.0 20060810
>xhci_hcd 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>xhci_hcd 0000:02:00.0: setting latency timer to 64
>xhci_hcd 0000:02:00.0: xHCI Host Controller
>xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 8
>xhci_hcd 0000:02:00.0: irq 17, io mem 0xfd8fe000
>xhci_hcd 0000:02:00.0: irq 42 for MSI/MSI-X
>xhci_hcd 0000:02:00.0: irq 43 for MSI/MSI-X
>xhci_hcd 0000:02:00.0: irq 44 for MSI/MSI-X
>xhci_hcd 0000:02:00.0: irq 45 for MSI/MSI-X
>xhci_hcd 0000:02:00.0: irq 46 for MSI/MSI-X
>xhci_hcd 0000:02:00.0: irq 47 for MSI/MSI-X
>xhci_hcd 0000:02:00.0: irq 48 for MSI/MSI-X
>usb usb8: No SuperSpeed endpoint companion for config 1  interface 0 altsetting 0 ep 129: using minimum values
>xHCI xhci_add_endpoint called for root hub
>xHCI xhci_check_bandwidth called for root hub
>hub 8-0:1.0: USB hub found
>hub 8-0:1.0: 4 ports detected
>IR JVC protocol handler initialized
>IR Sony protocol handler initialized
>saa7130/34: v4l2 driver version 0.2.16 loaded
>saa7134 0000:03:08.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>saa7134[0]: found at 0000:03:08.0, rev: 1, irq: 22, latency: 32, mmio: 0xfdfff000
>saa7134[0]: subsystem: ffff:ffff, board: Terratec Cinergy 400 TV [card=8,insmod option]
>saa7134[0]: board init: gpio is 50000
>lirc_dev: IR Remote Control driver registered, major 254 
>Registered IR keymap rc-cinergy
>input: saa7134 IR (Terratec Cinergy 40 as /devices/pci0000:00/0000:00:14.4/0000:03:08.0/rc/rc0/input3
>rc0: saa7134 IR (Terratec Cinergy 40 as /devices/pci0000:00/0000:00:14.4/0000:03:08.0/rc/rc0
>IR LIRC bridge handler initialized
>HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>[drm] radeon kernel modesetting enabled.
>radeon 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>radeon 0000:01:00.0: setting latency timer to 64
>[drm] initializing kernel modesetting (CYPRESS 0x1002:0x6899).
>[drm] register mmio base: 0xFDDC0000
>[drm] register mmio size: 131072
>ATOM BIOS: CYPRESS
>radeon 0000:01:00.0: VRAM: 1024M 0x00000000 - 0x3FFFFFFF (1024M used)
>radeon 0000:01:00.0: GTT: 512M 0x40000000 - 0x5FFFFFFF
>[drm] Detected VRAM RAM=1024M, BAR=256M
>[drm] RAM width 256bits DDR
>saa7134[0]: i2c eeprom 00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>saa7134[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>saa7134[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>saa7134[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>saa7134[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>saa7134[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>saa7134[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>saa7134[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>saa7134[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>saa7134[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>saa7134[0]: i2c eeprom b0: ff ff ff
>[TTM] Zone  kernel: Available graphics memory: 2027706 kiB.
>[TTM] Initializing pool allocator.
> ff ff ff ff ff ff ff ff ff ff ff ff ff
>saa7134[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>saa7134[0]: i2c eeprom d0: ff ff
>[drm] radeon: 1024M of VRAM memory ready
>[drm] radeon: 512M of GTT memory ready.
> ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>saa7134[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>saa7134[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>radeon 0000:01:00.0: irq 49 for MSI/MSI-X
>radeon 0000:01:00.0: radeon: using MSI.
>[drm] radeon: irq initialized.
>[drm] GART: num cpu pages 131072, num gpu pages 131072
>[drm] Loading CYPRESS Microcode
>hda_codec: ALC892: BIOS auto-probing.
>TUNER: Unable to find symbol tea5767_autodetection()
>tuner 0-0060: chip found @ 0xc0 (saa7134[0])
>tuner-simple 0-0060: creating new instance
>tuner-simple 0-0060: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
>saa7134[0]: registered device video0 [v4l2]
>saa7134[0]: registered device vbi0
>[drm] ring test succeeded in 1 usecs
>[drm] radeon: ib pool ready.
>[drm] ib test succeeded in 0 usecs
>failed to evaluate ATIF got AE_BAD_PARAMETER
>[drm] Radeon Display Connectors
>[drm] Connector 0:
>[drm]   DisplayPort
>[drm]   HPD4
>[drm]   DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
>[drm]   Encoders:
>[drm]     DFP1: INTERNAL_UNIPHY2
>[drm] Connector 1:
>[drm]   HDMI-A
>[drm]   HPD5
>[drm]   DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
>[drm]   Encoders:
>[drm]     DFP2: INTERNAL_UNIPHY2
>[drm] Connector 2:
>[drm]   DVI-I
>[drm]   HPD1
>[drm]   DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
>[drm]   Encoders:
>[drm]     DFP3: INTERNAL_UNIPHY1
>[drm]     CRT2: INTERNAL_KLDSCP_DAC2
>[drm] Connector 3:
>[drm]   DVI-I
>[drm]   HPD6
>[drm]   DDC: 0x6470 0x6470 0x6474 0x6474 0x6478 0x6478 0x647c 0x647c
>[drm]   Encoders:
>[drm]     DFP4: INTERNAL_UNIPHY
>[drm]     CRT1: INTERNAL_KLDSCP_DAC1
>[drm] Internal thermal controller with fan control
>[drm] radeon: power management initialized
>[drm] fb mappable at 0xD0140000
>[drm] vram apper at 0xD0000000
>[drm] size 9216000
>[drm] fb depth is 24
>[drm]    pitch is 7680
>Console: switching to colour frame buffer device 240x67
>fb0: radeondrmfb frame buffer device
>drm: registered panic notifier
>[drm] Initialized radeon 2.6.0 20080528 for 0000:01:00.0 on minor 0
>HDA Intel 0000:01:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>HDA Intel 0000:01:00.1: irq 50 for MSI/MSI-X
>HDA Intel 0000:01:00.1: setting latency timer to 64
>fuse init (API version 7.15)
>loop: module loaded
>Mantis 0000:03:07.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
>DVB: registering new adapter (Mantis DVB adapter)
>DVB: registering adapter 0 frontend 0 (Philips TDA10023 DVB-C)...
>it87: Found IT8720F chip at 0x228, revision 8
>it87: Routing internal VCCH to in7
>it87: Beeping is supported
>vboxdrv: Trying to deactivate the NMI watchdog permanently...
>vboxdrv: Successfully done.
>vboxdrv: Found 6 processor cores.
>VBoxDrv: dbg - g_abExecMemory=ffffffffa02ee020
>vboxdrv: fAsync=0 offMin=0x782 offMax=0xe13e
>vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
>vboxdrv: Successfully loaded version 3.2.10 (interface 0x00140001).
>EXT3-fs: barriers not enabled
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs (sda1): using internal journal
>EXT3-fs (sda1): mounted filesystem with ordered data mode
>REISERFS (device sda7): found reiserfs format "3.6" with standard journal
>REISERFS (device sda7): using ordered data mode
>REISERFS (device sda7): journal params: device sda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>REISERFS (device sda7): checking transaction log (sda7)
>REISERFS (device sda7): Using r5 hash to sort names
>EXT3-fs: barriers not enabled
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs (sda6): using internal journal
>EXT3-fs (sda6): mounted filesystem with ordered data mode
>SGI XFS with security attributes, large block/inode numbers, no debug enabled
>XFS mounting filesystem sda9
>Ending clean XFS mount for filesystem: sda9
>REISERFS (device sda8): found reiserfs format "3.6" with standard journal
>REISERFS (device sda8): using ordered data mode
>REISERFS (device sda8): journal params: device sda8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>REISERFS (device sda8): checking transaction log (sda8)
>REISERFS (device sda8): Using r5 hash to sort names
>EXT3-fs: barriers not enabled
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs (sdb7): using internal journal
>EXT3-fs (sdb7): mounted filesystem with ordered data mode
>FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
>r8169 0000:05:00.0: eth0: link up
>r8169 0000:05:00.0: eth0: link up
>Adding 5119996k swap on /dev/sdb2.  Priority:-1 extents:1 across:5119996k 
>sshd (1984): /proc/1984/oom_adj is deprecated, please use /proc/1984/oom_score_adj instead.
>ata1.00: configured for UDMA/133
>ata1: EH complete
>ata2.00: configured for UDMA/133
>ata2: EH complete
>ata1.00: configured for UDMA/133
>ata1: EH complete
>ata2.00: configured for UDMA/133
>ata2: EH complete
>sd 6:0:0:0: [sdc] 3987456 512-byte logical blocks: (2.04 GB/1.90 GiB)
>sd 6:0:0:0: [sdc] Assuming drive cache: write through
>sd 6:0:0:0: [sdc] Assuming drive cache: write through
> sdc: sdc1

Actions: View

Attachments on bug 31681: 40334 | 40335 | 40336 | 40337

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.