Attachment 45021 Details for Bug 35781 – The dmesg when add "drm.debug=0xe" in grub with commit f0c86

The dmesg when add "drm.debug=0xe" in grub with commit f0c86

drm.debug.log (text/plain), 66.61 KB, created by meng on 2011-03-30 00:17:02 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: meng

Created: 2011-03-30 00:17:02 UTC

Size: 66.61 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Initializing cgroup subsys cpu
>Linux version 2.6.38-rc8_unstable_20110328+ (root@x-build64) (gcc version 4.4.4 20100503 (Red Hat 4.4.4-2) (GCC) ) #1 SMP Mon Mar 28 19:54:05 CST 2011
>Command line: ro root=UUID=421bc532-d4d1-45c7-acbf-fed2b392d854 rd_NO_LUKS rd_NO_LVM rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYTABLE=us rhgb quiet drm.debug=0xe
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 0000000073be0000 (usable)
> BIOS-e820: 0000000073be0000 - 0000000073be3000 (ACPI NVS)
> BIOS-e820: 0000000073be3000 - 0000000073bf0000 (ACPI data)
> BIOS-e820: 0000000073bf0000 - 0000000073c00000 (reserved)
> BIOS-e820: 00000000f4000000 - 00000000f8000000 (reserved)
> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
>NX (Execute Disable) protection: active
>DMI 2.4 present.
>DMI: Gigabyte Technology Co., Ltd. H55M-S2H/H55M-S2H, BIOS F1 12/03/2009
>e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
>e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
>No AGP bridge found
>last_pfn = 0x73be0 max_arch_pfn = 0x400000000
>MTRR default type: uncachable
>MTRR fixed ranges enabled:
>  00000-9FFFF write-back
>  A0000-BFFFF uncachable
>  C0000-CBFFF write-protect
>  CC000-EFFFF uncachable
>  F0000-FFFFF write-through
>MTRR variable ranges enabled:
>  0 base 000000000 mask F80000000 write-back
>  1 base 078000000 mask FF8000000 uncachable
>  2 base 074000000 mask FFC000000 uncachable
>  3 disabled
>  4 disabled
>  5 disabled
>  6 disabled
>  7 disabled
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>found SMP MP-table at [ffff8800000f5610] f5610
>initial memory mapped : 0 - 20000000
>init_memory_mapping: 0000000000000000-0000000073be0000
> 0000000000 - 0073a00000 page 2M
> 0073a00000 - 0073be0000 page 4k
>kernel direct mapping tables up to 73be0000 @ 1fffc000-20000000
>RAMDISK: 37b51000 - 37ff0000
>ACPI: RSDP 00000000000f6fc0 00014 (v00 GBT   )
>ACPI: RSDT 0000000073be3040 00040 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
>ACPI: FACP 0000000073be30c0 00074 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
>ACPI: DSDT 0000000073be3180 05411 (v01 GBT    GBTUACPI 00001000 MSFT 0100000C)
>ACPI: FACS 0000000073be0000 00040
>ACPI: HPET 0000000073be8700 00038 (v01 GBT    GBTUACPI 42302E31 GBTU 00000098)
>ACPI: MCFG 0000000073be8780 0003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
>ACPI: EUDS 0000000073be87c0 00000 (v01 GBT             00000000      00000000)
>ACPI: TAMG 0000000073be8c90 00A1A (v01 GBT    GBT   B0 5455312E BG?? 53450101)
>ACPI: APIC 0000000073be8600 000BC (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
>ACPI: SSDT 0000000073be96b0 01CEC (v01  INTEL PPM RCM  80000001 INTL 20061109)
>ACPI: Local APIC address 0xfee00000
>No NUMA configuration found
>Faking a node at 0000000000000000-0000000073be0000
>Initmem setup node 0 0000000000000000-0000000073be0000
>  NODE_DATA [0000000073bdb000 - 0000000073bdffff]
> [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880071400000-ffff880072ffffff] on node 0
>Zone PFN ranges:
>  DMA      0x00000010 -> 0x00001000
>  DMA32    0x00001000 -> 0x00100000
>  Normal   empty
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0: 0x00000010 -> 0x0000009f
>    0: 0x00000100 -> 0x00073be0
>On node 0 totalpages: 473967
>  DMA zone: 56 pages used for memmap
>  DMA zone: 6 pages reserved
>  DMA zone: 3921 pages, LIFO batch:0
>  DMA32 zone: 6426 pages used for memmap
>  DMA32 zone: 463558 pages, LIFO batch:31
>ACPI: PM-Timer IO Port: 0x408
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x04] enabled)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] enabled)
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)
>ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
>ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
>ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Using ACPI (MADT) for SMP configuration information
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>SMP: Allowing 8 CPUs, 4 hotplug CPUs
>nr_irqs_gsi: 40
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
>PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
>Allocating PCI resources starting at 73c00000 (gap: 73c00000:80400000)
>setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
>PERCPU: Embedded 26 pages/cpu @ffff880073800000 s74880 r8192 d23424 u262144
>pcpu-alloc: s74880 r8192 d23424 u262144 alloc=1*2097152
>pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
>Built 1 zonelists in Node order, mobility grouping on.  Total pages: 467479
>Policy zone: DMA32
>Kernel command line: ro root=UUID=421bc532-d4d1-45c7-acbf-fed2b392d854 rd_NO_LUKS rd_NO_LVM rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYTABLE=us rhgb quiet drm.debug=0xe
>PID hash table entries: 4096 (order: 3, 32768 bytes)
>Checking aperture...
>No AGP bridge found
>Calgary: detecting Calgary via BIOS EBDA area
>Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>Memory: 1852876k/1896320k available (3752k kernel code, 452k absent, 42992k reserved, 3369k data, 588k init)
>SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
>Hierarchical RCU implementation.
>	RCU-based detection of stalled CPUs is disabled.
>NR_IRQS:2304
>Console: colour VGA+ 80x25
>console [tty0] enabled
>hpet clockevent registered
>Fast TSC calibration using PIT
>Detected 3199.948 MHz processor.
>Calibrating delay loop (skipped), value calculated using timer frequency.. 6399.89 BogoMIPS (lpj=3199948)
>pid_max: default: 32768 minimum: 301
>Security Framework initialized
>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Mount-cache hash table entries: 256
>Initializing cgroup subsys ns
>ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
>Initializing cgroup subsys cpuacct
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>mce: CPU supports 9 MCE banks
>CPU0: Thermal monitoring enabled (TM1)
>using mwait in idle threads.
>ACPI: Core revision 20110112
>Setting APIC routing to flat
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>CPU0: Intel(R) Core(TM) i5 CPU         650  @ 3.20GHz stepping 02
>Performance Events: PEBS fmt1+, Westmere events, Intel PMU driver.
>... version:                3
>... bit width:              48
>... generic registers:      4
>... value mask:             0000ffffffffffff
>... max period:             000000007fffffff
>... fixed-purpose events:   3
>... event mask:             000000070000000f
>Booting Node   0, Processors  #1 #2 #3
>Brought up 4 CPUs
>Total of 4 processors activated (25599.22 BogoMIPS).
>Time:  7:05:34  Date: 03/30/11
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf4000000-0xf7ffffff] (base 0xf4000000)
>PCI: MMCONFIG at [mem 0xf4000000-0xf7ffffff] reserved in E820
>PCI: Using configuration type 1 for base access
>bio: create slab <bio-0> at 0
>ACPI: EC: Look up EC in DSDT
>ACPI Warning: Incorrect checksum in table [TAMG] - 0x2A, should be 0x29 (20110112/tbutils-314)
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: No dock devices found.
>PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
>pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7]
>pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff]
>pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
>pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
>pci_root PNP0A03:00: host bridge window [mem 0x73c00000-0xfebfffff]
>pci 0000:00:00.0: [8086:0040] type 0 class 0x000600
>DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
>pci 0000:00:02.0: [8086:0042] type 0 class 0x000300
>pci 0000:00:02.0: reg 10: [mem 0xfb400000-0xfb7fffff 64bit]
>pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
>pci 0000:00:02.0: reg 20: [io  0xff00-0xff07]
>pci 0000:00:16.0: [8086:3b64] type 0 class 0x000780
>pci 0000:00:16.0: reg 10: [mem 0xfbfff000-0xfbfff00f 64bit]
>pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:16.0: PME# disabled
>pci 0000:00:1a.0: [8086:3b3b] type 0 class 0x000c03
>pci 0000:00:1a.0: reg 20: [io  0xfe00-0xfe1f]
>pci 0000:00:1a.1: [8086:3b3e] type 0 class 0x000c03
>pci 0000:00:1a.1: reg 20: [io  0xfd00-0xfd1f]
>pci 0000:00:1a.2: [8086:3b3f] type 0 class 0x000c03
>pci 0000:00:1a.2: reg 20: [io  0xfc00-0xfc1f]
>pci 0000:00:1a.7: [8086:3b3c] type 0 class 0x000c03
>pci 0000:00:1a.7: reg 10: [mem 0xfbffe000-0xfbffe3ff]
>pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1a.7: PME# disabled
>pci 0000:00:1b.0: [8086:3b56] type 0 class 0x000403
>pci 0000:00:1b.0: reg 10: [mem 0xfbff8000-0xfbffbfff 64bit]
>pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1b.0: PME# disabled
>pci 0000:00:1c.0: [8086:3b42] type 1 class 0x000604
>pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.0: PME# disabled
>pci 0000:00:1c.4: [8086:3b4a] type 1 class 0x000604
>pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.4: PME# disabled
>pci 0000:00:1c.5: [8086:3b4c] type 1 class 0x000604
>pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.5: PME# disabled
>pci 0000:00:1d.0: [8086:3b36] type 0 class 0x000c03
>pci 0000:00:1d.0: reg 20: [io  0xfb00-0xfb1f]
>pci 0000:00:1d.1: [8086:3b37] type 0 class 0x000c03
>pci 0000:00:1d.1: reg 20: [io  0xfa00-0xfa1f]
>pci 0000:00:1d.2: [8086:3b38] type 0 class 0x000c03
>pci 0000:00:1d.2: reg 20: [io  0xf900-0xf91f]
>pci 0000:00:1d.7: [8086:3b34] type 0 class 0x000c03
>pci 0000:00:1d.7: reg 10: [mem 0xfbffd000-0xfbffd3ff]
>pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1d.7: PME# disabled
>pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
>pci 0000:00:1f.0: [8086:3b06] type 0 class 0x000601
>pci 0000:00:1f.2: [8086:3b20] type 0 class 0x000101
>pci 0000:00:1f.2: reg 10: [io  0xf800-0xf807]
>pci 0000:00:1f.2: reg 14: [io  0xf700-0xf703]
>pci 0000:00:1f.2: reg 18: [io  0xf600-0xf607]
>pci 0000:00:1f.2: reg 1c: [io  0xf500-0xf503]
>pci 0000:00:1f.2: reg 20: [io  0xf400-0xf40f]
>pci 0000:00:1f.2: reg 24: [io  0xf300-0xf30f]
>pci 0000:00:1f.3: [8086:3b30] type 0 class 0x000c05
>pci 0000:00:1f.3: reg 10: [mem 0xfbffc000-0xfbffc0ff 64bit]
>pci 0000:00:1f.3: reg 20: [io  0x0500-0x051f]
>pci 0000:00:1f.5: [8086:3b26] type 0 class 0x000101
>pci 0000:00:1f.5: reg 10: [io  0xf100-0xf107]
>pci 0000:00:1f.5: reg 14: [io  0xf000-0xf003]
>pci 0000:00:1f.5: reg 18: [io  0xef00-0xef07]
>pci 0000:00:1f.5: reg 1c: [io  0xee00-0xee03]
>pci 0000:00:1f.5: reg 20: [io  0xed00-0xed0f]
>pci 0000:00:1f.5: reg 24: [io  0xec00-0xec0f]
>pci 0000:00:1c.0: PCI bridge to [bus 01-01]
>pci 0000:00:1c.0:   bridge window [io  0xf000-0x0000] (disabled)
>pci 0000:00:1c.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
>pci 0000:00:1c.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
>pci 0000:02:00.0: [197b:2368] type 0 class 0x000101
>pci 0000:02:00.0: reg 10: [io  0xdf00-0xdf07]
>pci 0000:02:00.0: reg 14: [io  0xde00-0xde03]
>pci 0000:02:00.0: reg 18: [io  0xdd00-0xdd07]
>pci 0000:02:00.0: reg 1c: [io  0xdc00-0xdc03]
>pci 0000:02:00.0: reg 20: [io  0xdb00-0xdb0f]
>pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
>pci 0000:00:1c.4: PCI bridge to [bus 02-02]
>pci 0000:00:1c.4:   bridge window [io  0xd000-0xdfff]
>pci 0000:00:1c.4:   bridge window [mem 0xfbd00000-0xfbdfffff]
>pci 0000:00:1c.4:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
>pci 0000:03:00.0: [10ec:8168] type 0 class 0x000200
>pci 0000:03:00.0: reg 10: [io  0xbe00-0xbeff]
>pci 0000:03:00.0: reg 18: [mem 0xfbeff000-0xfbefffff 64bit pref]
>pci 0000:03:00.0: reg 20: [mem 0xfbef8000-0xfbefbfff 64bit pref]
>pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
>pci 0000:03:00.0: supports D1 D2
>pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:03:00.0: PME# disabled
>pci 0000:00:1c.5: PCI bridge to [bus 03-03]
>pci 0000:00:1c.5:   bridge window [io  0xb000-0xbfff]
>pci 0000:00:1c.5:   bridge window [mem 0xfbb00000-0xfbbfffff]
>pci 0000:00:1c.5:   bridge window [mem 0xfbe00000-0xfbefffff 64bit pref]
>pci 0000:04:02.0: [1106:3106] type 0 class 0x000200
>pci 0000:04:02.0: reg 10: [io  0xce00-0xceff]
>pci 0000:04:02.0: reg 14: [mem 0xfbcff000-0xfbcff0ff]
>pci 0000:04:02.0: reg 30: [mem 0x00000000-0x0000ffff pref]
>pci 0000:04:02.0: supports D1 D2
>pci 0000:04:02.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:04:02.0: PME# disabled
>pci 0000:00:1e.0: PCI bridge to [bus 04-04] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [io  0xc000-0xcfff]
>pci 0000:00:1e.0:   bridge window [mem 0xfbc00000-0xfbcfffff]
>pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
>pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [mem 0x73c00000-0xfebfffff] (subtractive decode)
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
> pci0000:00: Requesting ACPI _OSC control (0x1d)
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
>vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
>vgaarb: loaded
>SCSI subsystem initialized
>libata version 3.00 loaded.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: pci_cache_line_size set to 64 bytes
>reserve RAM buffer: 000000000009f800 - 000000000009ffff 
>reserve RAM buffer: 0000000073be0000 - 0000000073ffffff 
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
>hpet0: 8 comparators, 64-bit 14.318180 MHz counter
>Switching to clocksource hpet
>Switched to NOHz mode on CPU #0
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp 00:00: [bus 00-3f]
>pnp 00:00: [io  0x0cf8-0x0cff]
>Switched to NOHz mode on CPU #3
>pnp 00:00: [io  0x0000-0x0cf7 window]
>pnp 00:00: [io  0x0d00-0xffff window]
>pnp 00:00: [mem 0x000a0000-0x000bffff window]
>pnp 00:00: [mem 0x000c0000-0x000dffff window]
>pnp 00:00: [mem 0x73c00000-0xfebfffff window]
>Switched to NOHz mode on CPU #1
>Switched to NOHz mode on CPU #2
>pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
>pnp 00:01: [io  0x0010-0x001f]
>pnp 00:01: [io  0x0022-0x003f]
>pnp 00:01: [io  0x0044-0x005f]
>pnp 00:01: [io  0x0062-0x0063]
>pnp 00:01: [io  0x0065-0x006f]
>pnp 00:01: [io  0x0074-0x007f]
>pnp 00:01: [io  0x0091-0x0093]
>pnp 00:01: [io  0x00a2-0x00bf]
>pnp 00:01: [io  0x00e0-0x00ef]
>pnp 00:01: [io  0x04d0-0x04d1]
>pnp 00:01: [io  0x0290-0x029f]
>pnp 00:01: [io  0x0800-0x087f]
>pnp 00:01: [io  0x0290-0x0294]
>pnp 00:01: [io  0x0880-0x088f]
>system 00:01: [io  0x04d0-0x04d1] has been reserved
>system 00:01: [io  0x0290-0x029f] has been reserved
>system 00:01: [io  0x0800-0x087f] has been reserved
>system 00:01: [io  0x0290-0x0294] has been reserved
>system 00:01: [io  0x0880-0x088f] has been reserved
>system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp 00:02: [dma 4]
>pnp 00:02: [io  0x0000-0x000f]
>pnp 00:02: [io  0x0080-0x0090]
>pnp 00:02: [io  0x0094-0x009f]
>pnp 00:02: [io  0x00c0-0x00df]
>pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
>pnp 00:03: [irq 0 disabled]
>pnp 00:03: [irq 8]
>pnp 00:03: [mem 0xfed00000-0xfed003ff]
>pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
>pnp 00:04: [io  0x0070-0x0073]
>pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
>pnp 00:05: [io  0x0061]
>pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
>pnp 00:06: [io  0x00f0-0x00ff]
>pnp 00:06: [irq 13]
>pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
>pnp 00:07: [io  0x03f0-0x03f5]
>pnp 00:07: [io  0x03f7]
>pnp 00:07: [irq 6]
>pnp 00:07: [dma 2]
>pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active)
>pnp 00:08: [io  0x03f8-0x03ff]
>pnp 00:08: [irq 4]
>pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
>pnp 00:09: [io  0x0400-0x04cf]
>pnp 00:09: [io  0x04d2-0x04ff]
>system 00:09: [io  0x0400-0x04cf] has been reserved
>system 00:09: [io  0x04d2-0x04ff] has been reserved
>system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp 00:0a: [mem 0xf4000000-0xf7ffffff]
>system 00:0a: [mem 0xf4000000-0xf7ffffff] has been reserved
>system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp 00:0b: [mem 0x000ccc00-0x000cffff]
>pnp 00:0b: [mem 0x000f0000-0x000f7fff]
>pnp 00:0b: [mem 0x000f8000-0x000fbfff]
>pnp 00:0b: [mem 0x000fc000-0x000fffff]
>pnp 00:0b: [mem 0x73be0000-0x73bfffff]
>pnp 00:0b: [mem 0x00000000-0x0009ffff]
>pnp 00:0b: [mem 0x00100000-0x73bdffff]
>pnp 00:0b: [mem 0xfec00000-0xfec00fff]
>pnp 00:0b: [mem 0xfed10000-0xfed1dfff]
>pnp 00:0b: [mem 0xfed20000-0xfed8ffff]
>pnp 00:0b: [mem 0xfee00000-0xfee00fff]
>pnp 00:0b: [mem 0xffb00000-0xffb7ffff]
>pnp 00:0b: [mem 0xfff00000-0xffffffff]
>pnp 00:0b: [mem 0x000e0000-0x000effff]
>system 00:0b: [mem 0x000ccc00-0x000cffff] has been reserved
>system 00:0b: [mem 0x000f0000-0x000f7fff] could not be reserved
>system 00:0b: [mem 0x000f8000-0x000fbfff] could not be reserved
>system 00:0b: [mem 0x000fc000-0x000fffff] could not be reserved
>system 00:0b: [mem 0x73be0000-0x73bfffff] could not be reserved
>system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
>system 00:0b: [mem 0x00100000-0x73bdffff] could not be reserved
>system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
>system 00:0b: [mem 0xfed10000-0xfed1dfff] has been reserved
>system 00:0b: [mem 0xfed20000-0xfed8ffff] has been reserved
>system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
>system 00:0b: [mem 0xffb00000-0xffb7ffff] has been reserved
>system 00:0b: [mem 0xfff00000-0xffffffff] has been reserved
>system 00:0b: [mem 0x000e0000-0x000effff] has been reserved
>system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
>pnp 00:0c: [mem 0xffb80000-0xffbfffff]
>pnp 00:0c: Plug and Play ACPI device, IDs INT0800 (active)
>pnp: PnP ACPI: found 13 devices
>ACPI: ACPI bus type pnp unregistered
>pci 0000:00:1c.0: BAR 8: assigned [mem 0x73c00000-0x73dfffff]
>pci 0000:00:1c.0: BAR 9: assigned [mem 0x73e00000-0x73ffffff 64bit pref]
>pci 0000:00:1c.4: BAR 9: assigned [mem 0x74000000-0x741fffff 64bit pref]
>pci 0000:00:1e.0: BAR 9: assigned [mem 0x74200000-0x742fffff pref]
>pci 0000:00:1c.0: BAR 7: assigned [io  0x1000-0x1fff]
>pci 0000:00:1c.0: PCI bridge to [bus 01-01]
>pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
>pci 0000:00:1c.0:   bridge window [mem 0x73c00000-0x73dfffff]
>pci 0000:00:1c.0:   bridge window [mem 0x73e00000-0x73ffffff 64bit pref]
>pci 0000:00:1c.4: PCI bridge to [bus 02-02]
>pci 0000:00:1c.4:   bridge window [io  0xd000-0xdfff]
>pci 0000:00:1c.4:   bridge window [mem 0xfbd00000-0xfbdfffff]
>pci 0000:00:1c.4:   bridge window [mem 0x74000000-0x741fffff 64bit pref]
>pci 0000:03:00.0: BAR 6: assigned [mem 0xfbe00000-0xfbe1ffff pref]
>pci 0000:00:1c.5: PCI bridge to [bus 03-03]
>pci 0000:00:1c.5:   bridge window [io  0xb000-0xbfff]
>pci 0000:00:1c.5:   bridge window [mem 0xfbb00000-0xfbbfffff]
>pci 0000:00:1c.5:   bridge window [mem 0xfbe00000-0xfbefffff 64bit pref]
>pci 0000:04:02.0: BAR 6: assigned [mem 0x74200000-0x7420ffff pref]
>pci 0000:00:1e.0: PCI bridge to [bus 04-04]
>pci 0000:00:1e.0:   bridge window [io  0xc000-0xcfff]
>pci 0000:00:1e.0:   bridge window [mem 0xfbc00000-0xfbcfffff]
>pci 0000:00:1e.0:   bridge window [mem 0x74200000-0x742fffff pref]
>pci 0000:00:1c.0: enabling device (0000 -> 0003)
>pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:1c.0: setting latency timer to 64
>pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:1c.4: setting latency timer to 64
>pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>pci 0000:00:1c.5: setting latency timer to 64
>pci 0000:00:1e.0: setting latency timer to 64
>pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
>pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
>pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
>pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
>pci_bus 0000:00: resource 8 [mem 0x73c00000-0xfebfffff]
>pci_bus 0000:01: resource 0 [io  0x1000-0x1fff]
>pci_bus 0000:01: resource 1 [mem 0x73c00000-0x73dfffff]
>pci_bus 0000:01: resource 2 [mem 0x73e00000-0x73ffffff 64bit pref]
>pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
>pci_bus 0000:02: resource 1 [mem 0xfbd00000-0xfbdfffff]
>pci_bus 0000:02: resource 2 [mem 0x74000000-0x741fffff 64bit pref]
>pci_bus 0000:03: resource 0 [io  0xb000-0xbfff]
>pci_bus 0000:03: resource 1 [mem 0xfbb00000-0xfbbfffff]
>pci_bus 0000:03: resource 2 [mem 0xfbe00000-0xfbefffff 64bit pref]
>pci_bus 0000:04: resource 0 [io  0xc000-0xcfff]
>pci_bus 0000:04: resource 1 [mem 0xfbc00000-0xfbcfffff]
>pci_bus 0000:04: resource 2 [mem 0x74200000-0x742fffff pref]
>pci_bus 0000:04: resource 4 [io  0x0000-0x0cf7]
>pci_bus 0000:04: resource 5 [io  0x0d00-0xffff]
>pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
>pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000dffff]
>pci_bus 0000:04: resource 8 [mem 0x73c00000-0xfebfffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
>TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 262144 bind 65536)
>TCP reno registered
>UDP hash table entries: 1024 (order: 3, 32768 bytes)
>UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
>NET: Registered protocol family 1
>pci 0000:00:02.0: Boot video device
>PCI: CLS 64 bytes, default 64
>Trying to unpack rootfs image as initramfs...
>Freeing initrd memory: 4732k freed
>audit: initializing netlink socket (disabled)
>type=2000 audit(1301468734.361:1): initialized
>HugeTLB registered 2 MB page size, pre-allocated 0 pages
>VFS: Disk quotas dquot_6.5.2
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>Btrfs loaded
>msgmni has been set to 3628
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: acpi_idle registered with cpuidle
>Monitor-Mwait will be used to enter C-1 state
>Monitor-Mwait will be used to enter C-2 state
>Monitor-Mwait will be used to enter C-3 state
>Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>Non-volatile memory driver v1.3
>Linux agpgart interface v0.103
>agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
>agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
>agpgart-intel 0000:00:00.0: detected 65536K stolen memory
>agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
>brd: module loaded
>ata_piix 0000:00:1f.2: version 2.13
>ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
>ata_piix 0000:00:1f.2: setting latency timer to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: SATA max UDMA/133 cmd 0xf800 ctl 0xf700 bmdma 0xf400 irq 19
>ata2: SATA max UDMA/133 cmd 0xf600 ctl 0xf500 bmdma 0xf408 irq 19
>ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
>ata_piix 0000:00:1f.5: setting latency timer to 64
>scsi2 : ata_piix
>scsi3 : ata_piix
>ata3: SATA max UDMA/133 cmd 0xf100 ctl 0xf000 bmdma 0xed00 irq 19
>ata4: SATA max UDMA/133 cmd 0xef00 ctl 0xee00 bmdma 0xed08 irq 19
>i8042: PNP: No PS/2 controller found. Probing ports directly.
>i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS?
>i8042: If AUX port is really absent please use the 'i8042.noaux' option
>serio: i8042 KBD port at 0x60,0x64 irq 1
>mousedev: PS/2 mouse device common for all mice
>rtc_cmos 00:04: RTC can wake from S4
>rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver usbhid
>usbhid: USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 17
>Registering the dns_resolver key type
>PM: Hibernation image not present or could not be loaded.
>registered taskstats version 1
>  Magic number: 3:489:67
>ata3: SATA link down (SStatus 0 SControl 300)
>ata4: SATA link down (SStatus 0 SControl 300)
>Refined TSC clocksource calibration: 3199.960 MHz.
>Switching to clocksource tsc
>ata2.00: SATA link down (SStatus 0 SControl 300)
>ata2.01: SATA link down (SStatus 0 SControl 300)
>ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata1.01: SATA link down (SStatus 0 SControl 300)
>ata1.00: ATA-8: ST3320418AS, CC38, max UDMA/133
>ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata1.00: configured for UDMA/133
>scsi 0:0:0:0: Direct-Access     ATA      ST3320418AS      CC38 PQ: 0 ANSI: 5
>Freeing unused kernel memory: 588k freed
>Write protecting the kernel read-only data: 6144k
>Freeing unused kernel memory: 324k freed
>Freeing unused kernel memory: 240k freed
>dracut: dracut-005-3.fc13
>dracut: rd_NO_LUKS: removing cryptoluks activation
>udev: starting version 151
>udevd (812): /proc/812/oom_adj is deprecated, please use /proc/812/oom_score_adj instead.
>input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
>ACPI: Power Button [PWRB]
>input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
>ACPI: Power Button [PWRF]
>[drm] Initialized drm 1.1.0 20060810
>i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>i915 0000:00:02.0: setting latency timer to 64
>[drm:intel_opregion_setup], graphic opregion physical addr: 0x73be0800
>[drm:intel_opregion_setup], SWSCI supported
>i915 0000:00:02.0: irq 40 for MSI/MSI-X
>[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
>[drm] Driver supports precise vblank timestamp query.
>[drm:init_status_page], render ring hws offset: 0x00000000
>[drm:init_status_page], bsd ring hws offset: 0x00022000
>[drm:intel_parse_bios], Using VBT from OpRegion: $VBT IRONLAKE-DESK  d
>[drm:parse_general_definitions], crt_ddc_bus_pin: 2
>[drm:parse_sdvo_panel_data], Found SDVO panel mode in BIOS VBT tables:
>[drm:drm_mode_debug_printmodeline], Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
>[drm:parse_sdvo_device_mapping], No SDVO device info is found in VBT
>[drm:intel_dsm_pci_probe], no _DSM method for intel device
>[drm:intel_modeset_init], 2 display pipes available.
>[drm:intel_crt_init], pch crt adpa set to 0x80f40000
>[drm:intel_sdvo_read_byte], i2c transfer returned -6
>[drm:intel_sdvo_init], No SDVO device found on SDVOB
>[drm:intel_dp_i2c_init], i2c_init DPDDC-B
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_i2c_aux_ch], aux_ch failed -110
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_i2c_aux_ch], aux_ch failed -110
>[drm:intel_dp_i2c_init], i2c_init DPDDC-C
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_i2c_aux_ch], aux_ch failed -110
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_i2c_aux_ch], aux_ch failed -110
>[drm:intel_dp_i2c_init], i2c_init DPDDC-D
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_i2c_aux_ch], aux_ch failed -110
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_i2c_aux_ch], aux_ch failed -110
>[drm:intel_panel_get_backlight], get backlight PWM = 0
>vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
>[drm:ironlake_crtc_dpms], crtc 0/0 dpms off
>[drm:i915_get_vblank_timestamp], crtc 0 is disabled
>[drm:intel_update_fbc], 
>[drm:ironlake_crtc_dpms], crtc 1/1 dpms off
>[drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe B
>[drm:i915_get_vblank_timestamp], crtc 1 is disabled
>[drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe B
>[drm:intel_update_fbc], 
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1]
>[drm:intel_ironlake_crt_detect_hotplug], trigger hotplug detect cycle: adpa=0x3f40000
>[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0x3f40000, result 1
>[drm:intel_crt_detect], CRT detected via hotplug
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] probed modes :
>[drm:drm_mode_debug_printmodeline], Modeline 27:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x48 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 38:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 28:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 29:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 45:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 39:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 40:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 41:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 42:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 44:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 43:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 31:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 32:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 34:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 33:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 35:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 36:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 37:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] disconnected
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:DP-1]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:ironlake_dp_detect], DPCD: 0000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:DP-1] disconnected
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-2]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-2] disconnected
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-3]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-3] disconnected
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DP-2]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:ironlake_dp_detect], DPCD: 0000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DP-2] disconnected
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-3]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:ironlake_dp_detect], DPCD: 0000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-3] disconnected
>[drm:drm_setup_crtcs], 
>[drm:drm_enable_connectors], connector 5 enabled? yes
>[drm:drm_enable_connectors], connector 8 enabled? no
>[drm:drm_enable_connectors], connector 11 enabled? no
>[drm:drm_enable_connectors], connector 15 enabled? no
>[drm:drm_enable_connectors], connector 18 enabled? no
>[drm:drm_enable_connectors], connector 20 enabled? no
>[drm:drm_enable_connectors], connector 23 enabled? no
>[drm:drm_target_preferred], looking for cmdline mode on connector 5
>[drm:drm_target_preferred], looking for preferred mode on connector 5
>[drm:drm_target_preferred], found mode 1680x1050
>[drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config
>[drm:drm_setup_crtcs], desired mode 1680x1050 set on crtc 3
>[drm:intelfb_create], allocated 1680x1050 fb: 0x00043000, bo ffff8800379cdc00
>fbcon: inteldrmfb (fb0) is primary device
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:46] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], crtc has no fb, full mode set
>[drm:drm_crtc_helper_set_config], modes are different, full mode set
>[drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[drm:drm_mode_debug_printmodeline], Modeline 30:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x48 0x5
>[drm:drm_crtc_helper_set_config], encoder changed, full mode switch
>[drm:drm_crtc_helper_set_config], crtc changed, full mode switch
>[drm:drm_crtc_helper_set_config], [CONNECTOR:5:VGA-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], attempting to set mode from userspace
>[drm:drm_mode_debug_printmodeline], Modeline 30:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x48 0x5
>[drm:drm_crtc_helper_set_mode], [CRTC:3]
>[drm:intel_crtc_mode_set], Mode for pipe A:
>[drm:drm_mode_debug_printmodeline], Modeline 30:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x48 0x5
>[drm:intel_crtc_mode_set], disabling CxSR downclocking
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:intel_pipe_set_base_atomic], Writing base 00043000 00000000 0 0 6720
>[drm:intel_update_fbc], 
>[drm:ironlake_update_wm], FIFO watermarks For pipe A - plane 9, cursor: 6
>[drm:ironlake_check_srwm], watermark 1: display plane 89, fbc lines 3, cursor 6
>[drm:ironlake_check_srwm], watermark 2: display plane 199, fbc lines 4, cursor 10
>[drm:drm_crtc_helper_set_mode], [ENCODER:6:DAC-6] set [MODE:30:1680x1050]
>[drm:ironlake_update_wm], FIFO watermarks For pipe A - plane 9, cursor: 6
>[drm:ironlake_check_srwm], watermark 1: display plane 89, fbc lines 3, cursor 6
>[drm:ironlake_check_srwm], watermark 2: display plane 199, fbc lines 4, cursor 10
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:ironlake_fdi_link_train], FDI_RX_IIR 0x700
>[drm:ironlake_fdi_link_train], FDI train 1 done.
>[drm:ironlake_fdi_link_train], FDI_RX_IIR 0x600
>[drm:ironlake_fdi_link_train], FDI train 2 done.
>[drm:ironlake_fdi_link_train], FDI train done
>[drm:intel_update_fbc], 
>[drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
>[drm:drm_crtc_helper_set_config], 	[CONNECTOR:5:VGA-1] set DPMS on
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:4] [NOFB]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:5:VGA-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:46] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:5:VGA-1] to [CRTC:3]
>Console: switching to colour frame buffer device 210x65
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:46] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:5:VGA-1] to [CRTC:3]
>fb0: inteldrmfb frame buffer device
>drm: registered panic notifier
>[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
>[drm:intel_prepare_page_flip], preparing flip with no unpin work?
>dracut: Starting plymouth daemon
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:46] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:5:VGA-1] to [CRTC:3]
>Floppy drive(s): fd0 is 1.44M
>uhci_hcd: USB Universal Host Controller Interface driver
>uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>uhci_hcd 0000:00:1a.0: setting latency timer to 64
>uhci_hcd 0000:00:1a.0: UHCI Host Controller
>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
>pata_jmicron 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pata_jmicron 0000:02:00.0: setting latency timer to 64
>scsi4 : pata_jmicron
>scsi5 : pata_jmicron
>ata5: PATA max UDMA/100 cmd 0xdf00 ctl 0xde00 bmdma 0xdb00 irq 16
>ata6: PATA max UDMA/100 cmd 0xdd00 ctl 0xdc00 bmdma 0xdb08 irq 16
>uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000fe00
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: UHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.38-rc8_unstable_20110328+ uhci_hcd
>usb usb1: SerialNumber: 0000:00:1a.0
>FDC 0 is a post-1991 82077
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
>uhci_hcd 0000:00:1a.1: setting latency timer to 64
>uhci_hcd 0000:00:1a.1: UHCI Host Controller
>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
>sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000fd00
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: UHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.38-rc8_unstable_20110328+ uhci_hcd
>usb usb2: SerialNumber: 0000:00:1a.1
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>uhci_hcd 0000:00:1a.2: setting latency timer to 64
>uhci_hcd 0000:00:1a.2: UHCI Host Controller
>uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000fc00
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.38-rc8_unstable_20110328+ uhci_hcd
>usb usb3: SerialNumber: 0000:00:1a.2
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>uhci_hcd 0000:00:1d.0: setting latency timer to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fb00
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.38-rc8_unstable_20110328+ uhci_hcd
>usb usb4: SerialNumber: 0000:00:1d.0
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>uhci_hcd 0000:00:1d.1: setting latency timer to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fa00
>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: UHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.38-rc8_unstable_20110328+ uhci_hcd
>usb usb5: SerialNumber: 0000:00:1d.1
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>uhci_hcd 0000:00:1d.2: setting latency timer to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000f900
>usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb6: Product: UHCI Host Controller
>usb usb6: Manufacturer: Linux 2.6.38-rc8_unstable_20110328+ uhci_hcd
>usb usb6: SerialNumber: 0000:00:1d.2
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 2 ports detected
>ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>ehci_hcd 0000:00:1a.7: setting latency timer to 64
>ehci_hcd 0000:00:1a.7: EHCI Host Controller
>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 7
>ehci_hcd 0000:00:1a.7: debug port 2
>ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
>ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfbffe000
> sda: sda1 sda2 sda4 < sda5 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
>usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb7: Product: EHCI Host Controller
>usb usb7: Manufacturer: Linux 2.6.38-rc8_unstable_20110328+ ehci_hcd
>usb usb7: SerialNumber: 0000:00:1a.7
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 6 ports detected
>ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>ehci_hcd 0000:00:1d.7: setting latency timer to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 8
>ehci_hcd 0000:00:1d.7: debug port 2
>ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
>ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfbffd000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
>usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb8: Product: EHCI Host Controller
>usb usb8: Manufacturer: Linux 2.6.38-rc8_unstable_20110328+ ehci_hcd
>usb usb8: SerialNumber: 0000:00:1d.7
>hub 8-0:1.0: USB hub found
>hub 8-0:1.0: 6 ports detected
>EXT3-fs: barriers not enabled
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs (sda1): mounted filesystem with ordered data mode
>dracut: Mounted root filesystem /dev/sda1
>usb 2-2: new low speed USB device using uhci_hcd and address 2
>dracut: Loading SELinux policy
>usb 2-2: New USB device found, idVendor=0557, idProduct=2220
>usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 2-2: Product: ATEN  CS-1758/54
>usb 2-2: Manufacturer: ATEN
>input: ATEN ATEN  CS-1758/54 as /devices/pci0000:00/0000:00:1a.1/usb2/2-2/2-2:1.0/input/input2
>generic-usb 0003:0557:2220.0001: input,hidraw0: USB HID v1.10 Keyboard [ATEN ATEN  CS-1758/54] on usb-0000:00:1a.1-2/input0
>input: ATEN ATEN  CS-1758/54 as /devices/pci0000:00/0000:00:1a.1/usb2/2-2/2-2:1.1/input/input3
>generic-usb 0003:0557:2220.0002: input,hidraw1: USB HID v1.10 Mouse [ATEN ATEN  CS-1758/54] on usb-0000:00:1a.1-2/input1
>dracut: /sbin/load_policy: Can't load policy: No such device
>dracut: Switching root
>readahead: starting
>udev: starting version 151
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>microcode: CPU0 sig=0x20652, pf=0x2, revision=0x9
>input: PC Speaker as /devices/platform/pcspkr/input/input4
>iTCO_vendor_support: vendor-support=0
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
>iTCO_wdt: Found a H55 TCO device (Version=2, TCOBASE=0x0460)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>microcode: CPU1 sig=0x20652, pf=0x2, revision=0x9
>microcode: CPU2 sig=0x20652, pf=0x2, revision=0x9
>microcode: CPU3 sig=0x20652, pf=0x2, revision=0x9
>microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
>i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>via-rhine.c:v1.10-LK1.5.0 2010-10-09 Written by Donald Becker
>via-rhine 0000:04:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>eth0: VIA Rhine III at 0xfbcff000, 00:1e:58:9f:b0:17, IRQ 18.
>eth0: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000.
>udev: renamed network interface eth0 to eth1
>r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
>r8169 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>r8169 0000:03:00.0: setting latency timer to 64
>r8169 0000:03:00.0: irq 41 for MSI/MSI-X
>r8169 0000:03:00.0: eth0: RTL8168d/8111d at 0xffffc9001599e000, 6c:f0:49:70:b1:73, XID 083000c0 IRQ 41
>HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>HDA Intel 0000:00:1b.0: irq 42 for MSI/MSI-X
>HDA Intel 0000:00:1b.0: setting latency timer to 64
>ALSA sound/pci/hda/patch_realtek.c:1527: SKU: Nid=0x1d sku_cfg=0x4005e601
>ALSA sound/pci/hda/patch_realtek.c:1529: SKU: port_connectivity=0x1
>ALSA sound/pci/hda/patch_realtek.c:1530: SKU: enable_pcbeep=0x0
>ALSA sound/pci/hda/patch_realtek.c:1531: SKU: check_sum=0x00000005
>ALSA sound/pci/hda/patch_realtek.c:1532: SKU: customization=0x000000e6
>ALSA sound/pci/hda/patch_realtek.c:1533: SKU: external_amp=0x0
>ALSA sound/pci/hda/patch_realtek.c:1534: SKU: platform_type=0x0
>ALSA sound/pci/hda/patch_realtek.c:1535: SKU: swap=0x0
>ALSA sound/pci/hda/patch_realtek.c:1536: SKU: override=0x1
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com
>EXT3-fs (sda1): using internal journal
>EXT3-fs: barriers not enabled
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs (sda5): warning: maximal mount count reached, running e2fsck is recommended
>EXT3-fs (sda5): using internal journal
>EXT3-fs (sda5): mounted filesystem with ordered data mode
>Adding 2047996k swap on /dev/sda2.  Priority:-1 extents:1 across:2047996k 
>NET: Registered protocol family 10
>r8169 0000:03:00.0: eth0: unable to apply firmware patch
>r8169 0000:03:00.0: eth0: link down
>r8169 0000:03:00.0: eth0: link down
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0x83f40018, result 1
>[drm:intel_crt_detect], CRT detected via hotplug
>[drm:output_poll_execute], [CONNECTOR:5:VGA-1] status updated from 1 to 1
>[drm:output_poll_execute], [CONNECTOR:8:HDMI-A-1] status updated from 2 to 2
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:ironlake_dp_detect], DPCD: 0000
>[drm:output_poll_execute], [CONNECTOR:11:DP-1] status updated from 2 to 2
>[drm:output_poll_execute], [CONNECTOR:15:HDMI-A-2] status updated from 2 to 2
>[drm:output_poll_execute], [CONNECTOR:18:HDMI-A-3] status updated from 2 to 2
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:ironlake_dp_detect], DPCD: 0000
>[drm:output_poll_execute], [CONNECTOR:20:DP-2] status updated from 2 to 2
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:ironlake_dp_detect], DPCD: 0000
>[drm:output_poll_execute], [CONNECTOR:23:DP-3] status updated from 2 to 2
>r8169 0000:03:00.0: eth0: link up
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>RPC: Registered tcp NFSv4.1 backchannel transport module.
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:46] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:5:VGA-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:4] [NOFB]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:5:VGA-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:46] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:5:VGA-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:46] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:5:VGA-1] to [CRTC:3]
>eth0: no IPv6 routers present
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:46] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:5:VGA-1] to [CRTC:3]
>[drm:i915_driver_open], 
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:46] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:5:VGA-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:4] [NOFB]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:5:VGA-1] to [CRTC:3]
>[drm:i915_driver_open], 
>[drm:drm_mode_getresources], CRTC[2] CONNECTORS[7] ENCODERS[7]
>[drm:drm_mode_getresources], CRTC[2] CONNECTORS[7] ENCODERS[7]
>[drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1]
>[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0x83f40018, result 1
>[drm:intel_crt_detect], CRT detected via hotplug
>[drm:drm_mode_debug_printmodeline], Modeline 27:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x48 0x5
>[drm:drm_mode_prune_invalid], Not using 1680x1050 mode -3
>[drm:drm_mode_debug_printmodeline], Modeline 38:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_mode_prune_invalid], Not using 1280x1024 mode -3
>[drm:drm_mode_debug_printmodeline], Modeline 28:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_mode_prune_invalid], Not using 1280x1024 mode -3
>[drm:drm_mode_debug_printmodeline], Modeline 29:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
>[drm:drm_mode_prune_invalid], Not using 1280x960 mode -3
>[drm:drm_mode_debug_printmodeline], Modeline 45:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
>[drm:drm_mode_prune_invalid], Not using 1152x864 mode -3
>[drm:drm_mode_debug_printmodeline], Modeline 39:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[drm:drm_mode_prune_invalid], Not using 1024x768 mode -3
>[drm:drm_mode_debug_printmodeline], Modeline 40:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
>[drm:drm_mode_prune_invalid], Not using 1024x768 mode -3
>[drm:drm_mode_debug_printmodeline], Modeline 42:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
>[drm:drm_mode_prune_invalid], Not using 832x624 mode -3
>[drm:drm_mode_debug_printmodeline], Modeline 44:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5
>[drm:drm_mode_prune_invalid], Not using 800x600 mode -3
>[drm:drm_mode_debug_printmodeline], Modeline 43:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
>[drm:drm_mode_prune_invalid], Not using 800x600 mode -3
>[drm:drm_mode_debug_printmodeline], Modeline 34:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa
>[drm:drm_mode_prune_invalid], Not using 640x480 mode -3
>[drm:drm_mode_debug_printmodeline], Modeline 33:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
>[drm:drm_mode_prune_invalid], Not using 640x480 mode -3
>[drm:drm_mode_debug_printmodeline], Modeline 35:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa
>[drm:drm_mode_prune_invalid], Not using 640x480 mode -3
>[drm:drm_mode_debug_printmodeline], Modeline 36:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[drm:drm_mode_prune_invalid], Not using 640x480 mode -3
>[drm:drm_mode_debug_printmodeline], Modeline 37:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[drm:drm_mode_prune_invalid], Not using 720x400 mode -3
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] probed modes :
>[drm:drm_mode_debug_printmodeline], Modeline 41:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 31:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 32:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 50:"848x480" 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 47:"640x480" 60 25175 640 656 752 800 480 489 492 525 0x40 0xa
>[drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[drm:drm_mode_getconnector], [CONNECTOR:8:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:8:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:11:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:DP-1]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:ironlake_dp_detect], DPCD: 0000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:DP-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:11:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:DP-1]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:ironlake_dp_detect], DPCD: 0000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:DP-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:15:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-2]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-2] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:15:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-2]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-2] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:18:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-3]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-3] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:18:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-3]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-3] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:20:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DP-2]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:ironlake_dp_detect], DPCD: 0000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DP-2] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:20:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DP-2]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:ironlake_dp_detect], DPCD: 0000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DP-2] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:23:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-3]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:ironlake_dp_detect], DPCD: 0000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-3] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:23:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-3]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:ironlake_dp_detect], DPCD: 0000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-3] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1]
>[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0x83f40018, result 1
>[drm:intel_crt_detect], CRT detected via hotplug
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] probed modes :
>[drm:drm_mode_debug_printmodeline], Modeline 41:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 31:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 32:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 50:"848x480" 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 47:"640x480" 60 25175 640 656 752 800 480 489 492 525 0x40 0xa
>[drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[drm:drm_mode_getconnector], [CONNECTOR:8:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:8:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:11:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:DP-1]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:ironlake_dp_detect], DPCD: 0000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:DP-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:11:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:DP-1]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:ironlake_dp_detect], DPCD: 0000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:DP-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:15:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-2]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-2] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:15:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-2]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-2] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:18:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-3]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-3] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:18:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-3]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-3] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:20:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DP-2]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:ironlake_dp_detect], DPCD: 0000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DP-2] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:20:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DP-2]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:ironlake_dp_detect], DPCD: 0000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DP-2] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:23:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-3]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:ironlake_dp_detect], DPCD: 0000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-3] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:23:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-3]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:ironlake_dp_detect], DPCD: 0000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-3] disconnected
>[drm:drm_mode_addfb], [FB:27]
>[drm:drm_mode_setcrtc], [CRTC:3]
>[drm:drm_mode_setcrtc], [CONNECTOR:5:VGA-1]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:27] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], modes are different, full mode set
>[drm:drm_mode_debug_printmodeline], Modeline 30:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x48 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 28:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x0 0xa
>[drm:drm_crtc_helper_set_config], [CONNECTOR:5:VGA-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], attempting to set mode from userspace
>[drm:drm_mode_debug_printmodeline], Modeline 28:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x0 0xa
>[drm:drm_crtc_helper_set_mode], [CRTC:3]
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:ironlake_update_wm], FIFO watermarks For pipe A - plane 5, cursor: 6
>[drm:ironlake_check_srwm], watermark 1: display plane 41, fbc lines 3, cursor 6
>[drm:ironlake_check_srwm], watermark 2: display plane 90, fbc lines 4, cursor 10
>[drm:intel_update_fbc], 
>[drm:intel_crtc_mode_set], Mode for pipe A:
>[drm:drm_mode_debug_printmodeline], Modeline 28:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x0 0xa
>[drm:intel_crtc_mode_set], disabling CxSR downclocking
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:intel_pipe_set_base_atomic], Writing base 00702000 00000000 0 0 8192
>[drm:intel_update_fbc], 
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:ironlake_update_wm], FIFO watermarks For pipe A - plane 5, cursor: 6
>[drm:ironlake_check_srwm], watermark 1: display plane 41, fbc lines 3, cursor 6
>[drm:ironlake_check_srwm], watermark 2: display plane 90, fbc lines 4, cursor 10
>[drm:drm_crtc_helper_set_mode], [ENCODER:6:DAC-6] set [MODE:28:1024x768]
>[drm:ironlake_update_wm], FIFO watermarks For pipe A - plane 5, cursor: 6
>[drm:ironlake_check_srwm], watermark 1: display plane 41, fbc lines 3, cursor 6
>[drm:ironlake_check_srwm], watermark 2: display plane 90, fbc lines 4, cursor 10
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:ironlake_fdi_link_train], FDI_RX_IIR 0x100
>[drm:ironlake_fdi_link_train], FDI train 1 done.
>[drm:ironlake_fdi_link_train], FDI_RX_IIR 0x600
>[drm:ironlake_fdi_link_train], FDI train 2 done.
>[drm:ironlake_fdi_link_train], FDI train done
>[drm:intel_update_fbc], 
>[drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
>[drm:drm_crtc_helper_set_config], 	[CONNECTOR:5:VGA-1] set DPMS on
>[drm:intel_prepare_page_flip], preparing flip with no unpin work?
>[drm:drm_mode_addfb], [FB:29]
>[drm:drm_mode_setcrtc], [CRTC:3]
>[drm:drm_mode_setcrtc], [CONNECTOR:5:VGA-1]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:29] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:5:VGA-1] to [CRTC:3]
>[drm:intel_pipe_set_base_atomic], Writing base 01702000 00000000 0 0 4096
>[drm:intel_update_fbc], 
>[drm:intel_prepare_page_flip], preparing flip with no unpin work?
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1]
>[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0x83f40000, result 1
>[drm:intel_crt_detect], CRT detected via hotplug
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] probed modes :
>[drm:drm_mode_debug_printmodeline], Modeline 41:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 31:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 32:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 50:"848x480" 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 47:"640x480" 60 25175 640 656 752 800 480 489 492 525 0x40 0xa
>[drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[drm:drm_mode_getconnector], [CONNECTOR:8:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:8:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:11:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:DP-1]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:ironlake_dp_detect], DPCD: 0000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:DP-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:11:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:DP-1]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:ironlake_dp_detect], DPCD: 0000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:DP-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:15:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-2]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-2] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:15:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-2]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-2] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:18:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-3]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-3] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:18:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-3]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-3] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:20:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DP-2]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:ironlake_dp_detect], DPCD: 0000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DP-2] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:20:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DP-2]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:ironlake_dp_detect], DPCD: 0000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DP-2] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:23:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-3]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:ironlake_dp_detect], DPCD: 0000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-3] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:23:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-3]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:ironlake_dp_detect], DPCD: 0000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-3] disconnected
>[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0x83f40000, result 1
>[drm:intel_crt_detect], CRT detected via hotplug
>[drm:output_poll_execute], [CONNECTOR:5:VGA-1] status updated from 1 to 1
>[drm:output_poll_execute], [CONNECTOR:8:HDMI-A-1] status updated from 2 to 2
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:ironlake_dp_detect], DPCD: 0000
>[drm:output_poll_execute], [CONNECTOR:11:DP-1] status updated from 2 to 2
>[drm:output_poll_execute], [CONNECTOR:15:HDMI-A-2] status updated from 2 to 2
>[drm:output_poll_execute], [CONNECTOR:18:HDMI-A-3] status updated from 2 to 2
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:ironlake_dp_detect], DPCD: 0000
>[drm:output_poll_execute], [CONNECTOR:20:DP-2] status updated from 2 to 2
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:ironlake_dp_detect], DPCD: 0000
>[drm:output_poll_execute], [CONNECTOR:23:DP-3] status updated from 2 to 2

Actions: View

Attachments on bug 35781: 45017 | 45018 | 45021 | 45052

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.