Attachment 45417 Details for Bug 32494 – Kernel log

Kernel log

dmesg (text/plain), 21.32 KB, created by Alexander Koryushkin on 2011-04-08 05:29:33 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Alexander Koryushkin

Created: 2011-04-08 05:29:33 UTC

Size: 21.32 KB

patch

obsolete

>Using PowerMac machine description
>Total memory = 1152MB; using 4096kB for hash table (at c7c00000)
>Linux version 2.6.38-gentoo-r1 (root@madpower) (gcc version 4.4.5 (Gentoo 4.4.5 p1.2, pie-0.4.5) ) #2 Fri Apr 8 00:56:59 MSD 2011
>Found UniNorth memory controller & host bridge @ 0xf8000000 revision: 0xd2
>Mapped at 0xff7c0000
>Found a Intrepid mac-io controller, rev: 0, mapped at 0xff740000
>Processor NAP mode on idle enabled.
>PowerMac motherboard: PowerBook G4 12"
>via-pmu: Server Mode is disabled
>PMU driver v2 initialized for Core99, firmware: 0c
>bootconsole [udbg0] enabled
>Found UniNorth PCI host bridge at 0x00000000f0000000. Firmware bus number: 0->0
>PCI host bridge /pci@f0000000  ranges:
> MEM 0x00000000f1000000..0x00000000f1ffffff -> 0x00000000f1000000 
>  IO 0x00000000f0000000..0x00000000f07fffff -> 0x0000000000000000
> MEM 0x0000000090000000..0x000000009fffffff -> 0x0000000090000000 
>Found UniNorth PCI host bridge at 0x00000000f2000000. Firmware bus number: 0->0
>PCI host bridge /pci@f2000000 (primary) ranges:
> MEM 0x00000000f3000000..0x00000000f3ffffff -> 0x00000000f3000000 
>  IO 0x00000000f2000000..0x00000000f27fffff -> 0x0000000000000000
> MEM 0x0000000080000000..0x000000008fffffff -> 0x0000000080000000 
>Found UniNorth PCI host bridge at 0x00000000f4000000. Firmware bus number: 0->0
>PCI host bridge /pci@f4000000  ranges:
> MEM 0x00000000f5000000..0x00000000f5ffffff -> 0x00000000f5000000 
>  IO 0x00000000f4000000..0x00000000f47fffff -> 0x0000000000000000
>nvram: Checking bank 0...
>nvram: gen0=920, gen1=921
>nvram: Active bank is: 1
>nvram: OF partition at 0x410
>nvram: XP partition at 0x1020
>nvram: NR partition at 0x1120
>Top of RAM: 0x48000000, Total RAM: 0x48000000
>Memory hole size: 0MB
>Zone PFN ranges:
>  DMA      0x00000000 -> 0x00030000
>  Normal   empty
>  HighMem  0x00030000 -> 0x00048000
>Movable zone start PFN for each node
>early_node_map[1] active PFN ranges
>    0: 0x00000000 -> 0x00048000
>On node 0 totalpages: 294912
>free_area_init_node: node 0, pgdat c06ca480, node_mem_map c0709000
>  DMA zone: 1536 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 195072 pages, LIFO batch:31
>  HighMem zone: 768 pages used for memmap
>  HighMem zone: 97536 pages, LIFO batch:31
>pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
>pcpu-alloc: [0] 0 
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 292608
>Kernel command line: root=/dev/sda6 ro 
>PID hash table entries: 4096 (order: 2, 16384 bytes)
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>High memory: 393216k
>Memory: 1157936k/1179648k available (6788k kernel code, 21712k reserved, 204k data, 156k bss, 220k init)
>Kernel virtual memory layout:
>  * 0xfffcf000..0xfffff000  : fixmap
>  * 0xff800000..0xffc00000  : highmem PTEs
>  * 0xfde72000..0xff800000  : early ioremap
>  * 0xf1000000..0xfde72000  : vmalloc & ioremap
>SLUB: Genslabs=15, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
>NR_IRQS:128 nr_irqs:128 16
>mpic: Setting up MPIC " MPIC 1   " version 1.2 at 80040000, max 4 CPUs
>mpic: ISU size: 64, shift: 6, mask: 3f
>mpic: Initializing for 64 sources
>GMT Delta read from XPRAM: 0 minutes, DST: off
>time_init: decrementer frequency = 33.280414 MHz
>time_init: processor frequency   = 533.333332 MHz
>clocksource: timebase mult[7830d91] shift[22] registered
>clockevent: decrementer mult[88510b1] shift[32] cpu[0]
>Console: colour dummy device 80x25
>console [tty0] enabled, bootconsole disabled
>pid_max: default: 32768 minimum: 301
>Mount-cache hash table entries: 512
>device-tree: Duplicate name in /cpus/PowerPC,G4@0, renamed to "l2-cache#1"
>MPC7450 family performance monitor hardware support registered
>NET: Registered protocol family 16
>irq: irq 42 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 42
>KeyWest i2c @0xf8001003 irq 42 /uni-n@f8000000/i2c@f8001000
> channel 0 bus <multibus>
> channel 1 bus <multibus>
>irq: irq 26 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 26
>KeyWest i2c @0x80018000 irq 26 /pci@f2000000/mac-io@17/i2c@18000
> channel 0 bus <multibus>
>PMU i2c /pci@f2000000/mac-io@17/via-pmu@16000/pmu-i2c
> channel 1 bus <multibus>
> channel 2 bus <multibus>
>irq: irq 25 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 25
>irq: irq 47 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 47
>PCI: Probing PCI hardware
>pci 0000:00:0b.0: [106b:0034] type 0 class 0x000600
>pci 0000:00:10.0: [10de:0179] type 0 class 0x000300
>pci 0000:00:10.0: reg 10: [mem 0x91000000-0x91ffffff]
>pci 0000:00:10.0: reg 14: [mem 0x94000000-0x97ffffff pref]
>pci 0000:00:10.0: reg 18: [mem 0x00000000-0x0007ffff pref]
>pci 0000:00:10.0: reg 30: [mem 0x90000000-0x9001ffff pref]
>irq: irq 48 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 48
>pci 0001:10:0b.0: [106b:0035] type 0 class 0x000600
>pci 0001:10:12.0: [14e4:4320] type 0 class 0x000280
>pci 0001:10:12.0: reg 10: [mem 0x80084000-0x80085fff]
>pci 0001:10:12.0: supports D1 D2
>pci 0001:10:12.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0001:10:12.0: PME# disabled
>pci 0001:10:17.0: [106b:003e] type 0 class 0x00ff00
>pci 0001:10:17.0: reg 10: [mem 0x80000000-0x8007ffff]
>pci 0001:10:18.0: [106b:003f] type 0 class 0x000c03
>pci 0001:10:18.0: reg 10: [mem 0x80082000-0x80082fff]
>pci 0001:10:19.0: [106b:003f] type 0 class 0x000c03
>pci 0001:10:19.0: reg 10: [mem 0x80081000-0x80081fff]
>pci 0001:10:1a.0: [106b:003f] type 0 class 0x000c03
>pci 0001:10:1a.0: reg 10: [mem 0x80080000-0x80080fff]
>irq: irq 52 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 52
>irq: irq 27 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 27
>irq: irq 28 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 28
>irq: irq 29 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 29
>pci 0002:20:0b.0: [106b:0036] type 0 class 0x000600
>pci 0002:20:0d.0: [106b:003b] type 0 class 0x00ff00
>pci 0002:20:0d.0: reg 10: [mem 0xf5004000-0xf5007fff]
>pci 0002:20:0e.0: [106b:0031] type 0 class 0x000c00
>pci 0002:20:0e.0: reg 10: [mem 0xf5000000-0xf5000fff]
>pci 0002:20:0e.0: supports D1 D2
>pci 0002:20:0e.0: PME# supported from D0 D1 D2 D3hot
>pci 0002:20:0e.0: PME# disabled
>pci 0002:20:0f.0: [106b:0032] type 0 class 0x000200
>pci 0002:20:0f.0: reg 10: [mem 0xf5200000-0xf53fffff]
>pci 0002:20:0f.0: reg 30: [mem 0xf5100000-0xf51fffff pref]
>irq: irq 39 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 39
>irq: irq 40 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 40
>irq: irq 41 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 41
>pci 0000:00:10.0: BAR 2: assigned [mem 0xf1000000-0xf107ffff pref]
>pci 0000:00:10.0: BAR 2: set to [mem 0xf1000000-0xf107ffff pref] (PCI address [0xf1000000-0xf107ffff])
>pci_bus 0000:00: resource 0 [io  0x802000-0x1001fff]
>pci_bus 0000:00: resource 1 [mem 0xf1000000-0xf1ffffff]
>pci_bus 0000:00: resource 2 [mem 0x90000000-0x9fffffff]
>pci_bus 0001:10: resource 0 [io  0x0000-0x7fffff]
>pci_bus 0001:10: resource 1 [mem 0xf3000000-0xf3ffffff]
>pci_bus 0001:10: resource 2 [mem 0x80000000-0x8fffffff]
>pci_bus 0002:20: resource 0 [io  0xff7fe000-0xffffdfff]
>pci_bus 0002:20: resource 1 [mem 0xf5000000-0xf5ffffff]
>bio: create slab <bio-0> at 0
>vgaarb: device added: PCI:0000:00:10.0,decodes=io+mem,owns=mem,locks=none
>vgaarb: loaded
>SCSI subsystem initialized
>libata version 3.00 loaded.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>Switching to clocksource timebase
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>UDP hash table entries: 512 (order: 1, 8192 bytes)
>UDP-Lite hash table entries: 512 (order: 1, 8192 bytes)
>NET: Registered protocol family 1
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>RPC: Registered tcp NFSv4.1 backchannel transport module.
>PCI: CLS mismatch (32 != 1020), using 32 bytes
>Thermal assist unit not available
>Registering PowerMac CPU frequency driver
>Low: 533 Mhz, High: 867 Mhz, Boot: 533 Mhz
>highmem bounce pool size: 64 pages
>VFS: Disk quotas dquot_6.5.2
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>squashfs: version 4.0 (2009/01/31) Phillip Lougher
>SGI XFS with ACLs, security attributes, no debug enabled
>SGI XFS Quota Management subsystem
>msgmni has been set to 1493
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
>io scheduler noop registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Generic RTC Driver v1.07
>Generic non-volatile memory driver v1.1
>Linux agpgart interface v0.103
>agpgart-uninorth 0000:00:0b.0: Apple UniNorth 2 chipset
>agpgart-uninorth 0000:00:0b.0: configuring for size idx: 64
>agpgart-uninorth 0000:00:0b.0: AGP aperture is 256M @ 0x0
>[drm] Initialized drm 1.1.0 20060810
>[drm] nouveau 0000:00:10.0: Detected an NV10 generation card (0x017900a5)
>[drm] nouveau 0000:00:10.0: OF bios successfully copied (5017 bytes)
>[drm] nouveau 0000:00:10.0: Attempting to load BIOS image from PRAMIN
>[drm] nouveau 0000:00:10.0: ... BIOS checksum invalid
>[drm] nouveau 0000:00:10.0: Attempting to load BIOS image from PROM
>[drm] nouveau 0000:00:10.0: ... BIOS signature not found
>[drm] nouveau 0000:00:10.0: Attempting to load BIOS image from PCIROM
>[drm] nouveau 0000:00:10.0: ... BIOS signature not found
>[drm] nouveau 0000:00:10.0: Attempting to load BIOS image from ACPI
>[drm] nouveau 0000:00:10.0: ... BIOS signature not found
>[drm] nouveau 0000:00:10.0: Using BIOS image from PRAMIN
>[drm] nouveau 0000:00:10.0: BMP BIOS found
>[drm] nouveau 0000:00:10.0: BMP version 5.21
>[drm] nouveau 0000:00:10.0: Bios version 04.17.00.55
>[drm] nouveau 0000:00:10.0: Found Display Configuration Block version 2.0
>[drm] nouveau 0000:00:10.0: Raw DCB entry 0: 04000223 00000004
>[drm] nouveau 0000:00:10.0: Raw DCB entry 1: 02010100 11b04fb0
>[drm] nouveau 0000:00:10.0: Raw DCB entry 2: 02010101 11b00703
>[drm] nouveau 0000:00:10.0: Loading NV17 power sequencing microcode
>[drm] nouveau 0000:00:10.0: Parsing VBIOS init table 0 at offset 0x060F
>[drm] nouveau 0000:00:10.0: Parsing VBIOS init table 1 at offset 0x0737
>[drm] nouveau 0000:00:10.0: Parsing VBIOS init table 2 at offset 0x0CC6
>[drm] nouveau 0000:00:10.0: Parsing VBIOS init table 3 at offset 0x0E4D
>[drm] nouveau 0000:00:10.0: Parsing VBIOS init table 4 at offset 0x0EA6
>[drm] nouveau 0000:00:10.0: BIOS FP mode: 1280x1024 (108000kHz pixel clock)
>[drm] nouveau 0000:00:10.0: 1 available performance level(s)
>[drm] nouveau 0000:00:10.0: 0: memory 400MHz
>[drm] nouveau 0000:00:10.0: c: memory 405MHz core 23MHz
>[TTM] Zone  kernel: Available graphics memory: 382360 kiB.
>[TTM] Zone highmem: Available graphics memory: 578968 kiB.
>[TTM] Initializing pool allocator.
>[drm] nouveau 0000:00:10.0: Detected 32MiB VRAM
>[drm] nouveau 0000:00:10.0: 64 MiB GART (aperture)
>[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
>[drm] No driver support for vblank timestamp query.
>[drm] nouveau 0000:00:10.0: Setting dpms mode 3 on lvds encoder (output 0)
>[drm] nouveau 0000:00:10.0: Calling LVDS script 1:
>[drm] nouveau 0000:00:10.0: Calling LVDS script 6:
>[drm] nouveau 0000:00:10.0: 0x1306: Parsing digital output script table
>[drm] nouveau 0000:00:10.0: Setting dpms mode 3 on vga encoder (output 1)
>[drm] nouveau 0000:00:10.0: Setting dpms mode 3 on TV encoder (output 2)
>[drm] nouveau 0000:00:10.0: Load detected on output B
>[drm] nouveau 0000:00:10.0: allocated 1024x768 fb: 0x49000, bo efbb6c00
>[drm] nouveau 0000:00:10.0: Setting dpms mode 0 on TV encoder (output 2)
>[drm] nouveau 0000:00:10.0: Output TV-1 is running on CRTC 0 using output B
>[drm] nouveau 0000:00:10.0: Calling LVDS script 2:
>[drm] nouveau 0000:00:10.0: 0x1072: Parsing digital output script table
>[drm] nouveau 0000:00:10.0: Setting dpms mode 0 on lvds encoder (output 0)
>[drm] nouveau 0000:00:10.0: Calling LVDS script 5:
>[drm] nouveau 0000:00:10.0: 0x1109: Parsing digital output script table
>[drm] nouveau 0000:00:10.0: Output LVDS-1 is running on CRTC 1 using output C
>Console: switching to colour frame buffer device 90x36
>[drm] nouveau 0000:00:10.0: GPU lockup - switching to software fbcon
>fb0: nouveaufb frame buffer device
>drm: registered panic notifier
>[drm] Initialized nouveau 0.0.16 20090420 for 0000:00:10.0 on minor 0
>brd: module loaded
>loop: module loaded
>MacIO PCI driver attached to Intrepid chipset
>irq: irq 32 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 32
>irq: irq 24 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 24
>irq: irq 12 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 16
>irq: irq 22 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 22
>irq: irq 5 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 17
>irq: irq 6 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 18
>irq: irq 23 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 23
>irq: irq 7 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 19
>irq: irq 8 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 20
>apm_emu: PMU APM Emulation initialized.
>adb: starting probe task...
>pata-pci-macio 0002:20:0d.0: enabling device (0000 -> 0002)
>pata-pci-macio 0002:20:0d.0: Activating pata-macio chipset UniNorth ATA-6, Apple bus ID 3
>scsi0 : pata_macio
>ata1: PATA max UDMA/100 irq 39
>ata1.00: ATA-6: FUJITSU MHS2040AT  D, 8105, max UDMA/100
>ata1.00: 78140160 sectors, multi 16: LBA48 
>adb devices: [2]: 2 c3 [3]: 3 1 [7]: 7 1f
>ADB keyboard at 2, handler 1
>Detected ADB keyboard, type ANSI.
>input: ADB keyboard as /devices/virtual/input/input0
>input: ADB Powerbook buttons as /devices/virtual/input/input1
>ata1.00: configured for UDMA/100
>ADB mouse at 3, handler set to 4
>scsi 0:0:0:0: Direct-Access     ATA      FUJITSU MHS2040A 8105 PQ: 0 ANSI: 5
> (trackpad)
>sd 0:0:0:0: [sda] 78140160 512-byte logical blocks: (40.0 GB/37.2 GiB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>
>input: ADB mouse as /devices/virtual/input/input2
>adb: finished probe task...
> sda: [mac] sda1 sda2 sda3 sda4 sda5 sda6 sda7
>sd 0:0:0:0: [sda] Attached SCSI disk
>pata-macio 0.00020000:ata-3: Activating pata-macio chipset KeyLargo ATA-3, Apple bus ID 0
>scsi1 : pata_macio
>ata2: PATA max MWDMA2 irq 24
>sungem.c:v0.98 8/24/03 David S. Miller (davem@redhat.com)
>sungem_phy: PHY ID: 4061e4, addr: 0
>gem 0002:20:0f.0: eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:0a:95:eb:a4:f2
>gem 0002:20:0f.0: eth0: Found BCM5221 PHY
>usbmon: debugfs is not available
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>ohci_hcd 0001:10:18.0: enabling device (0000 -> 0002)
>ohci_hcd 0001:10:18.0: OHCI Host Controller
>ohci_hcd 0001:10:18.0: new USB bus registered, assigned bus number 1
>ohci_hcd 0001:10:18.0: irq 27, io mem 0x80082000
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ohci_hcd 0001:10:19.0: enabling device (0000 -> 0002)
>ohci_hcd 0001:10:19.0: OHCI Host Controller
>ohci_hcd 0001:10:19.0: new USB bus registered, assigned bus number 2
>ohci_hcd 0001:10:19.0: irq 28, io mem 0x80081000
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ata2.00: ATAPI: MATSHITADVD-R   UJ-815, D0CB, max UDMA/66
>ohci_hcd 0001:10:1a.0: enabling device (0000 -> 0002)
>ohci_hcd 0001:10:1a.0: OHCI Host Controller
>ata2.00: configured for MWDMA2
>ohci_hcd 0001:10:1a.0: new USB bus registered, assigned bus number 3
>ohci_hcd 0001:10:1a.0: irq 29, io mem 0x80080000
>scsi 1:0:0:0: CD-ROM            MATSHITA DVD-R   UJ-815   D0CB PQ: 0 ANSI: 5
>sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
>cdrom: Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>uhci_hcd: USB Universal Host Controller Interface driver
>usbcore: registered new interface driver libusual
>mousedev: PS/2 mouse device common for all mice
>usb 1-2: new full speed USB device using ohci_hcd and address 2
>usbcore: registered new interface driver appletouch
>i2c /dev entries driver
>PowerMac i2c bus pmu 2 registered
>PowerMac i2c bus pmu 1 registered
>PowerMac i2c bus mac-io 0 registered
>PowerMac i2c bus uni-n 1 registered
>PowerMac i2c bus uni-n 0 registered
>usbcore: registered new interface driver usbhid
>usbhid: USB HID core driver
>TCP cubic registered
>NET: Registered protocol family 17
>Registering the dns_resolver key type
>input: PMU as /devices/virtual/input/input3
>Registered led device: pmu-led::front
>EXT3-fs: barriers not enabled
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs (sda6): mounted filesystem with writeback data mode
>VFS: Mounted root (ext3 filesystem) readonly on device 8:6.
>Freeing unused kernel memory: 220k init
>usb 2-1: new low speed USB device using ohci_hcd and address 2
>input: 2.4GHz 2way RF Receiver as /devices/pci0001:10/0001:10:19.0/usb2/2-1/2-1:1.0/input/input4
>generic-usb 0003:1BCF:053A.0001: input,hiddev0: USB HID v1.00 Mouse [2.4GHz 2way RF Receiver] on usb-0001:10:19.0-1/input0
>gem 0002:20:0f.0: eth0: Link is up at 100 Mbps, full-duplex
>udev: starting version 151
>udevd (1237): /proc/1237/oom_adj is deprecated, please use /proc/1237/oom_score_adj instead.
>b43-pci-bridge 0001:10:12.0: enabling device (0004 -> 0006)
>ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x04, vendor 0x4243)
>ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x05, vendor 0x4243)
>ssb: Core 2 found: PCMCIA (cc 0x80D, rev 0x02, vendor 0x4243)
>ssb: Core 3 found: V90 (cc 0x807, rev 0x02, vendor 0x4243)
>ssb: Core 4 found: PCI (cc 0x804, rev 0x09, vendor 0x4243)
>ssb: Sonics Silicon Backplane found on PCI device 0001:10:12.0
>pmac_zilog: 0.6 (Benjamin Herrenschmidt <benh@kernel.crashing.org>)
>ttyPZ0 at MMIO 0x80013020 (irq = 22) is a Z85c30 ESCC - Serial port
>ttyPZ1 at MMIO 0x80013000 (irq = 23) is a Z85c30 ESCC - Serial port
>cfg80211: Calling CRDA to update world regulatory domain
>Bluetooth: Core ver 2.15
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: Generic Bluetooth USB driver ver 0.6
>usbcore: registered new interface driver btusb
>b43-phy0: Broadcom 4306 WLAN found (core revision 5)
>ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
>Registered led device: b43-phy0::tx
>Registered led device: b43-phy0::rx
>Registered led device: b43-phy0::radio
>Broadcom 43xx driver loaded [ Features: PL, Firmware-ID: FW13 ]
>EXT3-fs (sda6): using internal journal
>Bluetooth: L2CAP ver 2.15
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM ver 1.11
>Bluetooth: BNEP (Ethernet Emulation) ver 1.3
>Bluetooth: BNEP filters: protocol multicast
>Bluetooth: SCO (Voice Link) ver 0.6
>Bluetooth: SCO socket layer initialized
>irq: irq 1 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 21
>irq: irq 2 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 30
>irq: irq 61 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 61
>[drm] nouveau 0000:00:10.0: Load detected on output B
>[drm] nouveau 0000:00:10.0: Load detected on output B
>input: PowerMac Beep as /devices/pci0001:10/0001:10:17.0/input/input5
>[drm] nouveau 0000:00:10.0: Setting dpms mode 3 on TV encoder (output 2)
>[drm] nouveau 0000:00:10.0: Setting dpms mode 0 on TV encoder (output 2)
>[drm] nouveau 0000:00:10.0: Output TV-1 is running on CRTC 0 using output B
>b43-phy0: Loading firmware version 478.104 (2008-07-01 00:50:23)
>gem 0002:20:0f.0: eth0: Link is up at 100 Mbps, full-duplex
>gem 0002:20:0f.0: eth0: Pause is disabled
>ata1.00: configured for UDMA/100
>ata1: EH complete
>wlan0: authenticate with 00:22:15:32:6f:f3 (try 1)
>wlan0: authenticated
>wlan0: associate with 00:22:15:32:6f:f3 (try 1)
>wlan0: RX AssocResp from 00:22:15:32:6f:f3 (capab=0x401 status=0 aid=2)
>wlan0: associated
>[drm] nouveau 0000:00:10.0: Load detected on output B
>[drm] nouveau 0000:00:10.0: Load detected on output B
>[drm] nouveau 0000:00:10.0: Setting dpms mode 3 on lvds encoder (output 0)
>[drm] nouveau 0000:00:10.0: Calling LVDS script 6:
>[drm] nouveau 0000:00:10.0: 0x116F: Parsing digital output script table
>[drm] nouveau 0000:00:10.0: Setting dpms mode 3 on TV encoder (output 2)
>[drm] nouveau 0000:00:10.0: Load detected on output B
>[drm] nouveau 0000:00:10.0: Setting dpms mode 0 on lvds encoder (output 0)
>[drm] nouveau 0000:00:10.0: Calling LVDS script 2:
>[drm] nouveau 0000:00:10.0: 0x1072: Parsing digital output script table
>[drm] nouveau 0000:00:10.0: Calling LVDS script 5:
>[drm] nouveau 0000:00:10.0: 0x1109: Parsing digital output script table
>[drm] nouveau 0000:00:10.0: Setting dpms mode 0 on TV encoder (output 2)
>PPP generic driver version 2.4.2
>PPP BSD Compression module registered
>PPP Deflate Compression module registered
>[drm] nouveau 0000:00:10.0: Setting dpms mode 3 on lvds encoder (output 0)
>[drm] nouveau 0000:00:10.0: Calling LVDS script 6:
>[drm] nouveau 0000:00:10.0: 0x116F: Parsing digital output script table
>[drm] nouveau 0000:00:10.0: Setting dpms mode 3 on TV encoder (output 2)

Actions: View

Attachments on bug 32494: 41232 | 41474 | 42021 | 45417 | 47161

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.