Attachment 46262 Details for Bug 36783 – dmesg

[patch] dmesg

modules (text/plain), 51.44 KB, created by Cedric Sodhi on 2011-05-02 13:43:48 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Cedric Sodhi

Created: 2011-05-02 13:43:48 UTC

Size: 51.44 KB

patch

obsolete

>Linux version 2.6.39-rc5 (root@fly) (gcc version 4.4.5 (Gentoo 4.4.5 p1.2, pie-0.4.5) ) #14 SMP Mon May 2 22:19:32 CEST 2011
>Command line: auto BOOT_IMAGE=Default ro root=801
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009d000 (usable)
> BIOS-e820: 000000000009d000 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000009b63f000 (usable)
> BIOS-e820: 000000009b63f000 - 000000009b6bf000 (reserved)
> BIOS-e820: 000000009b6bf000 - 000000009b7bf000 (ACPI NVS)
> BIOS-e820: 000000009b7bf000 - 000000009b7ff000 (ACPI data)
> BIOS-e820: 000000009b7ff000 - 000000009b800000 (usable)
> BIOS-e820: 000000009b800000 - 00000000a0000000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000feb00000 - 00000000feb04000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
> BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
> BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
> BIOS-e820: 0000000100000000 - 0000000158000000 (usable)
>NX (Execute Disable) protection: active
>DMI 2.6 present.
>DMI: Hewlett-Packard HP TouchSmart tm2 Notebook PC   /1486, BIOS F.23 10/28/2010
>e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
>e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
>No AGP bridge found
>last_pfn = 0x158000 max_arch_pfn = 0x400000000
>MTRR default type: uncachable
>MTRR fixed ranges enabled:
>  00000-9FFFF write-back
>  A0000-BFFFF uncachable
>  C0000-EFFFF write-through
>  F0000-FFFFF write-combining
>MTRR variable ranges enabled:
>  0 base 000000000 mask F80000000 write-back
>  1 base 0FFE00000 mask FFFE00000 write-protect
>  2 base 080000000 mask FE0000000 write-back
>  3 base 09C000000 mask FFC000000 uncachable
>  4 base 09B800000 mask FFF800000 uncachable
>  5 base 100000000 mask F80000000 write-back
>  6 base 158000000 mask FF8000000 uncachable
>  7 base 160000000 mask FE0000000 uncachable
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>last_pfn = 0x9b800 max_arch_pfn = 0x400000000
>initial memory mapped : 0 - 20000000
>Base memory trampoline at [ffff880000098000] 98000 size 20480
>init_memory_mapping: 0000000000000000-000000009b800000
> 0000000000 - 009b800000 page 2M
>kernel direct mapping tables up to 9b800000 @ 9b63b000-9b63f000
>init_memory_mapping: 0000000100000000-0000000158000000
> 0100000000 - 0158000000 page 2M
>kernel direct mapping tables up to 158000000 @ 157ff9000-158000000
>ACPI: RSDP 00000000000fe020 00024 (v02 HP    )
>ACPI: XSDT 000000009b7fe120 00094 (v01 HPQOEM SLIC-MPC 00000001      01000013)
>ACPI: FACP 000000009b7fc000 000F4 (v04 HP     SLIC-MPC 00000001 MSFT 01000013)
>ACPI: DSDT 000000009b7e9000 0FCE7 (v02 HP     SLIC-MPC 00000001 MSFT 01000013)
>ACPI: FACS 000000009b75e000 00040
>ACPI: ASF! 000000009b7fd000 000A5 (v32 HP     SLIC-MPC 00000001 MSFT 01000013)
>ACPI: HPET 000000009b7fb000 00038 (v01 HP     SLIC-MPC 00000001 MSFT 01000013)
>ACPI: APIC 000000009b7fa000 0008C (v02 HP     SLIC-MPC 00000001 MSFT 01000013)
>ACPI: MCFG 000000009b7f9000 0003C (v01 HP     SLIC-MPC 00000001 MSFT 01000013)
>ACPI: SLIC 000000009b7e8000 00176 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
>ACPI: SSDT 000000009b7e6000 01152 (v01 TrmRef PtidDevc 00001000 INTL 20051117)
>ACPI: SSDT 000000009b7e5000 00172 (v01  VaRef  Va_Acpi 00003000 INTL 20051117)
>ACPI: BOOT 000000009b7e4000 00028 (v01 HP     SLIC-MPC 00000001 MSFT 01000013)
>ACPI: SSDT 000000009b7e3000 00C39 (v01 INTEL   SataPri 00001000 INTL 20051117)
>ACPI: SSDT 000000009b7e2000 006C5 (v01 INTEL   SataSec 00001000 INTL 20051117)
>ACPI: ASPT 000000009b7e1000 00034 (v04 HP     SLIC-MPC 00000001 MSFT 01000013)
>ACPI: SSDT 000000009b7e0000 009F1 (v01  PmRef    CpuPm 00003000 INTL 20051117)
>ACPI: SSDT 000000009b7de000 01A8F (v01 AmdRef  AmdTabl 00001000 INTL 20051117)
>ACPI: Local APIC address 0xfee00000
> [ffffea0000000000-ffffea0004bfffff] PMD -> [ffff880148200000-ffff88014b9fffff] on node 0
>Zone PFN ranges:
>  DMA      0x00000010 -> 0x00001000
>  DMA32    0x00001000 -> 0x00100000
>  Normal   0x00100000 -> 0x00158000
>Movable zone start PFN for each node
>early_node_map[4] active PFN ranges
>    0: 0x00000010 -> 0x0000009d
>    0: 0x00000100 -> 0x0009b63f
>    0: 0x0009b7ff -> 0x0009b800
>    0: 0x00100000 -> 0x00158000
>On node 0 totalpages: 996813
>  DMA zone: 56 pages used for memmap
>  DMA zone: 5 pages reserved
>  DMA zone: 3920 pages, LIFO batch:0
>  DMA32 zone: 14280 pages used for memmap
>  DMA32 zone: 618104 pages, LIFO batch:31
>  Normal zone: 4928 pages used for memmap
>  Normal zone: 355520 pages, LIFO batch:31
>ACPI: PM-Timer IO Port: 0x408
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
>ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
>ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
>ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
>ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Using ACPI (MADT) for SMP configuration information
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>8 Processors exceeds NR_CPUS limit of 4
>SMP: Allowing 4 CPUs, 0 hotplug CPUs
>nr_irqs_gsi: 40
>PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
>PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
>PM: Registered nosave memory: 000000009b63f000 - 000000009b6bf000
>PM: Registered nosave memory: 000000009b6bf000 - 000000009b7bf000
>PM: Registered nosave memory: 000000009b7bf000 - 000000009b7ff000
>PM: Registered nosave memory: 000000009b800000 - 00000000a0000000
>PM: Registered nosave memory: 00000000a0000000 - 00000000e0000000
>PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
>PM: Registered nosave memory: 00000000f0000000 - 00000000feb00000
>PM: Registered nosave memory: 00000000feb00000 - 00000000feb04000
>PM: Registered nosave memory: 00000000feb04000 - 00000000fec00000
>PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
>PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000
>PM: Registered nosave memory: 00000000fed10000 - 00000000fed14000
>PM: Registered nosave memory: 00000000fed14000 - 00000000fed18000
>PM: Registered nosave memory: 00000000fed18000 - 00000000fed1a000
>PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
>PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
>PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
>PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
>PM: Registered nosave memory: 00000000fee01000 - 00000000ffe00000
>PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
>Allocating PCI resources starting at a0000000 (gap: a0000000:40000000)
>setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
>PERCPU: Embedded 25 pages/cpu @ffff880157c00000 s73600 r8192 d20608 u524288
>pcpu-alloc: s73600 r8192 d20608 u524288 alloc=1*2097152
>pcpu-alloc: [0] 0 1 2 3 
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 977544
>Kernel command line: auto BOOT_IMAGE=Default ro root=801
>PID hash table entries: 4096 (order: 3, 32768 bytes)
>Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
>Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Checking aperture...
>No AGP bridge found
>Memory: 3850816k/5636096k available (3564k kernel code, 1648844k absent, 136436k reserved, 1882k data, 424k init)
>SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
>Hierarchical RCU implementation.
>	CONFIG_RCU_FANOUT set to non-default value of 32
>	RCU-based detection of stalled CPUs is disabled.
>NR_IRQS:384
>Extended CMOS year: 2000
>Console: colour VGA+ 80x25
>console [tty0] enabled
>hpet clockevent registered
>Fast TSC calibration using PIT
>Detected 1196.981 MHz processor.
>Calibrating delay loop (skipped), value calculated using timer frequency.. 2393.96 BogoMIPS (lpj=4787924)
>pid_max: default: 32768 minimum: 301
>Mount-cache hash table entries: 256
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>mce: CPU supports 9 MCE banks
>CPU0: Thermal monitoring handled by SMI
>using mwait in idle threads.
>ACPI: Core revision 20110316
>Setting APIC routing to flat
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>CPU0: Intel(R) Core(TM) i5 CPU       U 430  @ 1.20GHz stepping 05
>Performance Events: PEBS fmt1+, Westmere events, Intel PMU driver.
>... version:                3
>... bit width:              48
>... generic registers:      4
>... value mask:             0000ffffffffffff
>... max period:             000000007fffffff
>... fixed-purpose events:   3
>... event mask:             000000070000000f
>Booting Node   0, Processors  #1
>smpboot cpu 1: start_ip = 98000
>CPU1: Thermal monitoring handled by SMI
> #2
>smpboot cpu 2: start_ip = 98000
>CPU2: Thermal monitoring handled by SMI
> #3 Ok.
>smpboot cpu 3: start_ip = 98000
>CPU3: Thermal monitoring handled by SMI
>Brought up 4 CPUs
>Total of 4 processors activated (9575.82 BogoMIPS).
>PM: Registering ACPI NVS region at 9b6bf000 (1048576 bytes)
>NET: Registered protocol family 16
>ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
>ACPI: bus type pci registered
>PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
>PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
>PCI: Using configuration type 1 for base access
>bio: create slab <bio-0> at 0
>ACPI: EC: Look up EC in DSDT
>ACPI: Executed 1 blocks of module-level executable AML code
>[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
>ACPI: SSDT 000000009b691a98 00334 (v01  PmRef  Cpu0Ist 00003000 INTL 20051117)
>ACPI: Dynamic OEM Table Load:
>ACPI: SSDT           (null) 00334 (v01  PmRef  Cpu0Ist 00003000 INTL 20051117)
>ACPI: SSDT 000000009b690018 00891 (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
>ACPI: Dynamic OEM Table Load:
>ACPI: SSDT           (null) 00891 (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
>ACPI: SSDT 000000009b691718 00303 (v01  PmRef    ApIst 00003000 INTL 20051117)
>ACPI: Dynamic OEM Table Load:
>ACPI: SSDT           (null) 00303 (v01  PmRef    ApIst 00003000 INTL 20051117)
>ACPI: SSDT 000000009b68fd98 00119 (v01  PmRef    ApCst 00003000 INTL 20051117)
>ACPI: Dynamic OEM Table Load:
>ACPI: SSDT           (null) 00119 (v01  PmRef    ApCst 00003000 INTL 20051117)
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
>[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
>ACPI: Power Resource [FN00] (on)
>ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
>PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>\_SB_.PCI0:_OSC invalid UUID
>_OSC request data:1 8 1f 
>ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
>pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
>pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
>pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
>pci_root PNP0A08:00: host bridge window [mem 0xa0000000-0xfeafffff]
>pci 0000:00:00.0: [8086:0044] type 0 class 0x000600
>pci 0000:00:01.0: [8086:0045] type 1 class 0x000604
>pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:01.0: PME# disabled
>pci 0000:00:02.0: [8086:0046] type 0 class 0x000300
>pci 0000:00:02.0: reg 10: [mem 0xc0000000-0xc03fffff 64bit]
>pci 0000:00:02.0: reg 18: [mem 0xb0000000-0xbfffffff 64bit pref]
>pci 0000:00:02.0: reg 20: [io  0x4050-0x4057]
>pci 0000:00:16.0: [8086:3b64] type 0 class 0x000780
>pci 0000:00:16.0: reg 10: [mem 0xc4506100-0xc450610f 64bit]
>pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:16.0: PME# disabled
>pci 0000:00:1a.0: [8086:3b3c] type 0 class 0x000c03
>pci 0000:00:1a.0: reg 10: [mem 0xc4505c00-0xc4505fff]
>pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1a.0: PME# disabled
>pci 0000:00:1b.0: [8086:3b56] type 0 class 0x000403
>pci 0000:00:1b.0: reg 10: [mem 0xc4500000-0xc4503fff 64bit]
>pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1b.0: PME# disabled
>pci 0000:00:1c.0: [8086:3b42] type 1 class 0x000604
>pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.0: PME# disabled
>pci 0000:00:1c.1: [8086:3b44] type 1 class 0x000604
>pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.1: PME# disabled
>pci 0000:00:1d.0: [8086:3b34] type 0 class 0x000c03
>pci 0000:00:1d.0: reg 10: [mem 0xc4505800-0xc4505bff]
>pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1d.0: PME# disabled
>pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
>pci 0000:00:1f.0: [8086:3b09] type 0 class 0x000601
>pci 0000:00:1f.2: [8086:3b29] type 0 class 0x000106
>pci 0000:00:1f.2: reg 10: [io  0x4048-0x404f]
>pci 0000:00:1f.2: reg 14: [io  0x405c-0x405f]
>pci 0000:00:1f.2: reg 18: [io  0x4040-0x4047]
>pci 0000:00:1f.2: reg 1c: [io  0x4058-0x405b]
>pci 0000:00:1f.2: reg 20: [io  0x4020-0x403f]
>pci 0000:00:1f.2: reg 24: [mem 0xc4505000-0xc45057ff]
>pci 0000:00:1f.2: PME# supported from D3hot
>pci 0000:00:1f.2: PME# disabled
>pci 0000:00:1f.3: [8086:3b30] type 0 class 0x000c05
>pci 0000:00:1f.3: reg 10: [mem 0xc4506000-0xc45060ff 64bit]
>pci 0000:00:1f.3: reg 20: [io  0x4000-0x401f]
>pci 0000:00:1f.6: [8086:3b32] type 0 class 0x001180
>pci 0000:00:1f.6: reg 10: [mem 0xc4504000-0xc4504fff 64bit]
>pci 0000:01:00.0: [1002:68e0] type 0 class 0x000300
>pci 0000:01:00.0: reg 10: [mem 0xa0000000-0xafffffff 64bit pref]
>pci 0000:01:00.0: reg 18: [mem 0xc4400000-0xc441ffff 64bit]
>pci 0000:01:00.0: reg 20: [io  0x3000-0x30ff]
>pci 0000:01:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
>pci 0000:01:00.0: supports D1 D2
>pci 0000:01:00.1: [1002:aa68] type 0 class 0x000403
>pci 0000:01:00.1: reg 10: [mem 0xc4420000-0xc4423fff 64bit]
>pci 0000:01:00.1: supports D1 D2
>pci 0000:00:01.0: PCI bridge to [bus 01-01]
>pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
>pci 0000:00:01.0:   bridge window [mem 0xc4400000-0xc44fffff]
>pci 0000:00:01.0:   bridge window [mem 0xa0000000-0xafffffff 64bit pref]
>pci 0000:02:00.0: [10ec:8168] type 0 class 0x000200
>pci 0000:02:00.0: reg 10: [io  0x2000-0x20ff]
>pci 0000:02:00.0: reg 18: [mem 0xc0404000-0xc0404fff 64bit pref]
>pci 0000:02:00.0: reg 20: [mem 0xc0400000-0xc0403fff 64bit pref]
>pci 0000:02:00.0: supports D1 D2
>pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:02:00.0: PME# disabled
>pci 0000:00:1c.0: PCI bridge to [bus 02-02]
>pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
>pci 0000:00:1c.0:   bridge window [mem 0xc3400000-0xc43fffff]
>pci 0000:00:1c.0:   bridge window [mem 0xc0400000-0xc13fffff 64bit pref]
>pci 0000:03:00.0: [14e4:4727] type 0 class 0x000280
>pci 0000:03:00.0: reg 10: [mem 0xc2400000-0xc2403fff 64bit]
>pci 0000:03:00.0: supports D1 D2
>pci 0000:00:1c.1: PCI bridge to [bus 03-03]
>pci 0000:00:1c.1:   bridge window [io  0x1000-0x1fff]
>pci 0000:00:1c.1:   bridge window [mem 0xc2400000-0xc33fffff]
>pci 0000:00:1c.1:   bridge window [mem 0xc1400000-0xc23fffff 64bit pref]
>pci 0000:00:1e.0: PCI bridge to [bus 04-04] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [io  0xf000-0x0000] (disabled)
>pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
>pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
>pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [mem 0xa0000000-0xfeafffff] (subtractive decode)
>pci_bus 0000:00: on NUMA node 0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
>\_SB_.PCI0:_OSC invalid UUID
>_OSC request data:1 9 1f 
>ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus ff])
>pci 0000:ff:00.0: [8086:2c62] type 0 class 0x000600
>pci 0000:ff:00.1: [8086:2d01] type 0 class 0x000600
>pci 0000:ff:02.0: [8086:2d10] type 0 class 0x000600
>pci 0000:ff:02.1: [8086:2d11] type 0 class 0x000600
>pci 0000:ff:02.2: [8086:2d12] type 0 class 0x000600
>pci 0000:ff:02.3: [8086:2d13] type 0 class 0x000600
>pci_bus 0000:ff: on NUMA node 0
>ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
>ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
>ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
>ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
>vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
>vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
>vgaarb: loaded
>SCSI subsystem initialized
>libata version 3.00 loaded.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>Advanced Linux Sound Architecture Driver Version 1.0.24.
>PCI: Using ACPI for IRQ routing
>PCI: pci_cache_line_size set to 64 bytes
>reserve RAM buffer: 000000000009d000 - 000000000009ffff 
>reserve RAM buffer: 000000009b63f000 - 000000009bffffff 
>reserve RAM buffer: 000000009b800000 - 000000009bffffff 
>cfg80211: Calling CRDA to update world regulatory domain
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
>hpet0: 8 comparators, 64-bit 14.318180 MHz counter
>Switching to clocksource hpet
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>Switched to NOHz mode on CPU #0
>Switched to NOHz mode on CPU #3
>Switched to NOHz mode on CPU #2
>Switched to NOHz mode on CPU #1
>pnp 00:00: [bus 00-fe]
>pnp 00:00: [io  0x0000-0x0cf7 window]
>pnp 00:00: [io  0x0cf8-0x0cff]
>pnp 00:00: [io  0x0d00-0xffff window]
>pnp 00:00: [mem 0x000a0000-0x000bffff window]
>pnp 00:00: [mem 0x000c0000-0x000c3fff window]
>pnp 00:00: [mem 0x000c4000-0x000c7fff window]
>pnp 00:00: [mem 0x000c8000-0x000cbfff window]
>pnp 00:00: [mem 0x000cc000-0x000cffff window]
>pnp 00:00: [mem 0x000d0000-0x000d3fff window]
>pnp 00:00: [mem 0x000d4000-0x000d7fff window]
>pnp 00:00: [mem 0x000d8000-0x000dbfff window]
>pnp 00:00: [mem 0x000dc000-0x000dffff window]
>pnp 00:00: [mem 0x000e0000-0x000e3fff window]
>pnp 00:00: [mem 0x000e4000-0x000e7fff window]
>pnp 00:00: [mem 0x000e8000-0x000ebfff window]
>pnp 00:00: [mem 0x000ec000-0x000effff window]
>pnp 00:00: [mem 0x000f0000-0x000fffff window]
>pnp 00:00: [mem 0xa0000000-0xfeafffff window]
>pnp 00:00: [mem 0xfed40000-0xfed44fff window]
>pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
>pnp 00:01: [io  0x0000-0x001f]
>pnp 00:01: [io  0x0081-0x0091]
>pnp 00:01: [io  0x0093-0x009f]
>pnp 00:01: [io  0x00c0-0x00df]
>pnp 00:01: [dma 4]
>pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
>pnp 00:02: [mem 0xff000000-0xffffffff]
>pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
>pnp 00:03: [mem 0xfed00000-0xfed003ff]
>pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
>pnp 00:04: [io  0x00f0]
>pnp 00:04: [irq 13]
>pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
>pnp 00:05: [io  0x002e-0x002f]
>pnp 00:05: [io  0x004e-0x004f]
>pnp 00:05: [io  0x0061]
>pnp 00:05: [io  0x0063]
>pnp 00:05: [io  0x0065]
>pnp 00:05: [io  0x0067]
>pnp 00:05: [io  0x0070]
>pnp 00:05: [io  0x0080]
>pnp 00:05: [io  0x0092]
>pnp 00:05: [io  0x00b2-0x00b3]
>pnp 00:05: [io  0x0680-0x069f]
>pnp 00:05: [io  0x0800-0x080f]
>pnp 00:05: [io  0x0810-0x0813]
>pnp 00:05: [io  0xffff]
>pnp 00:05: [io  0x0400-0x047f]
>pnp 00:05: [io  0x0500-0x0501]
>pnp 00:05: [io  0x0700-0x077f]
>pnp 00:05: [io  0x164e-0x164f]
>pnp 00:05: disabling [io  0x164e-0x164f] because it overlaps 0000:00:1c.1 BAR 13 [io  0x1000-0x1fff]
>system 00:05: [io  0x0680-0x069f] has been reserved
>system 00:05: [io  0x0800-0x080f] has been reserved
>system 00:05: [io  0x0810-0x0813] has been reserved
>system 00:05: [io  0xffff] has been reserved
>system 00:05: [io  0x0400-0x047f] has been reserved
>system 00:05: [io  0x0500-0x0501] has been reserved
>system 00:05: [io  0x0700-0x077f] has been reserved
>system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp 00:06: [io  0x0070-0x0077]
>pnp 00:06: [irq 8]
>pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
>pnp 00:07: [io  0x0060]
>pnp 00:07: [io  0x0064]
>pnp 00:07: [irq 1]
>pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
>pnp 00:08: [irq 12]
>pnp 00:08: Plug and Play ACPI device, IDs SYN1e2d SYN1e00 SYN0002 PNP0f13 (active)
>pnp 00:09: [irq 23]
>pnp 00:09: Plug and Play ACPI device, IDs HPQ0004 (active)
>pnp 00:0a: [mem 0xfed1c000-0xfed1ffff]
>pnp 00:0a: [mem 0xfed10000-0xfed13fff]
>pnp 00:0a: [mem 0xfed18000-0xfed18fff]
>pnp 00:0a: [mem 0xfed19000-0xfed19fff]
>pnp 00:0a: [mem 0xe0000000-0xefffffff]
>pnp 00:0a: [mem 0xfed20000-0xfed3ffff]
>pnp 00:0a: [mem 0xfed90000-0xfed8ffff disabled]
>pnp 00:0a: [mem 0xfed45000-0xfed8ffff]
>pnp 00:0a: [mem 0xff000000-0xffffffff]
>pnp 00:0a: [mem 0xfee00000-0xfeefffff]
>pnp 00:0a: [mem 0xc4600000-0xc4600fff]
>system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
>system 00:0a: [mem 0xfed10000-0xfed13fff] has been reserved
>system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
>system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
>system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
>system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
>system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
>system 00:0a: [mem 0xff000000-0xffffffff] could not be reserved
>system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
>system 00:0a: [mem 0xc4600000-0xc4600fff] has been reserved
>system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp 00:0b: [bus ff]
>pnp 00:0b: Plug and Play ACPI device, IDs PNP0a03 (active)
>pnp: PnP ACPI: found 12 devices
>ACPI: ACPI bus type pnp unregistered
>pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
>pci 0000:01:00.0: BAR 6: assigned [mem 0xc4440000-0xc445ffff pref]
>pci 0000:00:01.0: PCI bridge to [bus 01-01]
>pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
>pci 0000:00:01.0:   bridge window [mem 0xc4400000-0xc44fffff]
>pci 0000:00:01.0:   bridge window [mem 0xa0000000-0xafffffff 64bit pref]
>pci 0000:00:1c.0: PCI bridge to [bus 02-02]
>pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
>pci 0000:00:1c.0:   bridge window [mem 0xc3400000-0xc43fffff]
>pci 0000:00:1c.0:   bridge window [mem 0xc0400000-0xc13fffff 64bit pref]
>pci 0000:00:1c.1: PCI bridge to [bus 03-03]
>pci 0000:00:1c.1:   bridge window [io  0x1000-0x1fff]
>pci 0000:00:1c.1:   bridge window [mem 0xc2400000-0xc33fffff]
>pci 0000:00:1c.1:   bridge window [mem 0xc1400000-0xc23fffff 64bit pref]
>pci 0000:00:1e.0: PCI bridge to [bus 04-04]
>pci 0000:00:1e.0:   bridge window [io  disabled]
>pci 0000:00:1e.0:   bridge window [mem disabled]
>pci 0000:00:1e.0:   bridge window [mem pref disabled]
>pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:01.0: setting latency timer to 64
>pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>pci 0000:00:1c.0: setting latency timer to 64
>pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:1c.1: setting latency timer to 64
>pci 0000:00:1e.0: setting latency timer to 64
>pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
>pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
>pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
>pci_bus 0000:00: resource 7 [mem 0xa0000000-0xfeafffff]
>pci_bus 0000:01: resource 0 [io  0x3000-0x3fff]
>pci_bus 0000:01: resource 1 [mem 0xc4400000-0xc44fffff]
>pci_bus 0000:01: resource 2 [mem 0xa0000000-0xafffffff 64bit pref]
>pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
>pci_bus 0000:02: resource 1 [mem 0xc3400000-0xc43fffff]
>pci_bus 0000:02: resource 2 [mem 0xc0400000-0xc13fffff 64bit pref]
>pci_bus 0000:03: resource 0 [io  0x1000-0x1fff]
>pci_bus 0000:03: resource 1 [mem 0xc2400000-0xc33fffff]
>pci_bus 0000:03: resource 2 [mem 0xc1400000-0xc23fffff 64bit pref]
>pci_bus 0000:04: resource 4 [io  0x0000-0x0cf7]
>pci_bus 0000:04: resource 5 [io  0x0d00-0xffff]
>pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
>pci_bus 0000:04: resource 7 [mem 0xa0000000-0xfeafffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
>IPv4 FIB: Using LC-trie version 0.409
>TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 262144 bind 65536)
>TCP reno registered
>UDP hash table entries: 2048 (order: 4, 65536 bytes)
>UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
>NET: Registered protocol family 1
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>RPC: Registered tcp NFSv4.1 backchannel transport module.
>pci 0000:00:02.0: Boot video device
>pci 0000:00:1a.0: EHCI: BIOS handoff
>pci 0000:00:1d.0: EHCI: BIOS handoff
>PCI: CLS 64 bytes, default 64
>PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>Placing 64MB software IO TLB between ffff88009763b000 - ffff88009b63b000
>software IO TLB at phys 0x9763b000 - 0x9b63b000
>Simple Boot Flag at 0x44 set to 0x1
>Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>msgmni has been set to 7521
>alg: No test for stdrng (krng)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
>intel_idle: MWAIT substates: 0x1120
>intel_idle: v0.4 model 0x25
>intel_idle: lapic_timer_reliable_states 0xffffffff
>ACPI: AC Adapter [AC] (on-line)
>input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
>ACPI: Lid Switch [LID0]
>input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
>ACPI: Power Button [PWRB]
>input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
>ACPI: Power Button [PWRF]
>ACPI: Fan [FAN0] (on)
>ACPI: acpi_idle yielding to intel_idle
>thermal LNXTHERM:00: registered as thermal_zone0
>ACPI: Thermal Zone [TZ00] (55 C)
>thermal LNXTHERM:01: registered as thermal_zone1
>ACPI: Thermal Zone [TZ01] (40 C)
>thermal LNXTHERM:02: registered as thermal_zone2
>ACPI: Thermal Zone [TZ02] (63 C)
>brd: module loaded
>loop: module loaded
>ahci 0000:00:1f.2: version 3.0
>ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x1 impl SATA mode
>ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck pm led clo pio slum part ems apst 
>ahci 0000:00:1f.2: setting latency timer to 64
>scsi0 : ahci
>scsi1 : ahci
>scsi2 : ahci
>scsi3 : ahci
>ata1: SATA max UDMA/133 abar m2048@0xc4505000 port 0xc4505100 irq 19
>ata2: DUMMY
>ata3: DUMMY
>ata4: DUMMY
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ehci_hcd: block sizes: qh 104 qtd 96 itd 192 sitd 96
>ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>ehci_hcd 0000:00:1a.0: setting latency timer to 64
>ehci_hcd 0000:00:1a.0: EHCI Host Controller
>ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
>ACPI: Battery Slot [BAT0] (battery present)
>ehci_hcd 0000:00:1a.0: reset hcs_params 0x200003 dbg=2 cc=0 pcc=0 ordered !ppc ports=3
>ehci_hcd 0000:00:1a.0: reset hcc_params 36881 caching frame 1024 64 bit addr
>ehci_hcd 0000:00:1a.0: support lpm
>ehci_hcd 0000:00:1a.0: debug port 2
>ehci_hcd 0000:00:1a.0: reset command 0080012 (park)=0 ithresh=8 Periodic period=1024 Reset HALT
>ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
>ehci_hcd 0000:00:1a.0: supports USB remote wakeup
>ehci_hcd 0000:00:1a.0: irq 16, io mem 0xc4505c00
>ehci_hcd 0000:00:1a.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
>ehci_hcd 0000:00:1a.0: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
>ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
>usb usb1: default language 0x0409
>usb usb1: udev 1, busnum 1, minor = 0
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.39-rc5 ehci_hcd
>usb usb1: SerialNumber: 0000:00:1a.0
>usb usb1: usb_probe_device
>usb usb1: configuration #1 chosen from 1 choice
>usb usb1: adding 1-0:1.0 (config #1, interface 0)
>hub 1-0:1.0: usb_probe_interface
>hub 1-0:1.0: usb_probe_interface - got id
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 3 ports detected
>hub 1-0:1.0: standalone hub
>hub 1-0:1.0: no power switching (usb 1.0)
>hub 1-0:1.0: individual port over-current protection
>hub 1-0:1.0: power on to power good time: 20ms
>hub 1-0:1.0: local power source is good
>hub 1-0:1.0: trying to enable port power on non-switchable hub
>ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>ehci_hcd 0000:00:1d.0: setting latency timer to 64
>ehci_hcd 0000:00:1d.0: EHCI Host Controller
>ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:1d.0: reset hcs_params 0x200003 dbg=2 cc=0 pcc=0 ordered !ppc ports=3
>ehci_hcd 0000:00:1d.0: reset hcc_params 36881 caching frame 1024 64 bit addr
>ehci_hcd 0000:00:1d.0: support lpm
>ehci_hcd 0000:00:1d.0: debug port 2
>ehci_hcd 0000:00:1d.0: reset command 0080012 (park)=0 ithresh=8 Periodic period=1024 Reset HALT
>ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
>ehci_hcd 0000:00:1d.0: supports USB remote wakeup
>ehci_hcd 0000:00:1d.0: irq 20, io mem 0xc4505800
>ehci_hcd 0000:00:1d.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
>ehci_hcd 0000:00:1d.0: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
>ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
>usb usb2: default language 0x0409
>usb usb2: udev 1, busnum 2, minor = 128
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: EHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.39-rc5 ehci_hcd
>usb usb2: SerialNumber: 0000:00:1d.0
>usb usb2: usb_probe_device
>usb usb2: configuration #1 chosen from 1 choice
>usb usb2: adding 2-0:1.0 (config #1, interface 0)
>hub 2-0:1.0: usb_probe_interface
>hub 2-0:1.0: usb_probe_interface - got id
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 3 ports detected
>hub 2-0:1.0: standalone hub
>hub 2-0:1.0: no power switching (usb 1.0)
>hub 2-0:1.0: individual port over-current protection
>hub 2-0:1.0: power on to power good time: 20ms
>hub 2-0:1.0: local power source is good
>hub 2-0:1.0: trying to enable port power on non-switchable hub
>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>ohci_hcd: block sizes: ed 80 td 96
>uhci_hcd: USB Universal Host Controller Interface driver
>usbcore: registered new interface driver usblp
>Initializing USB Mass Storage driver...
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>usbcore: registered new interface driver libusual
>i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>i8042: Detected active multiplexing controller, rev 1.1
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX0 port at 0x60,0x64 irq 12
>serio: i8042 AUX1 port at 0x60,0x64 irq 12
>serio: i8042 AUX2 port at 0x60,0x64 irq 12
>serio: i8042 AUX3 port at 0x60,0x64 irq 12
>mousedev: PS/2 mouse device common for all mice
>rtc_cmos 00:06: RTC can wake from S4
>rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
>i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19
>lirc_dev: IR Remote Control driver registered, major 252 
>IR NEC protocol handler initialized
>IR RC5(x) protocol handler initialized
>IR RC6 protocol handler initialized
>IR JVC protocol handler initialized
>IR Sony protocol handler initialized
>IR RC5 (streamzap) protocol handler initialized
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
>IR LIRC bridge handler initialized
>Linux video capture interface: v2.00
>gspca: v2.12.0 registered
>coretemp coretemp.0: TjMax is 105 C.
>coretemp coretemp.2: TjMax is 105 C.
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
>iTCO_wdt: Found a HM55 TCO device (Version=2, TCOBASE=0x0460)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>iTCO_vendor_support: vendor-support=0
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver usbhid
>usbhid: USB HID core driver
>HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>HDA Intel 0000:00:1b.0: setting latency timer to 64
>ehci_hcd 0000:00:1a.0: GetStatus port:1 status 001803 0  ACK POWER sig=j CSC CONNECT
>hub 1-0:1.0: port 1: status 0501 change 0001
>ehci_hcd 0000:00:1d.0: GetStatus port:1 status 001803 0  ACK POWER sig=j CSC CONNECT
>hub 2-0:1.0: port 1: status 0501 change 0001
>HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>HDA Intel 0000:01:00.1: setting latency timer to 64
>usbcore: registered new interface driver snd-usb-audio
>ALSA device list:
>  #0: HDA Intel at 0xc4500000 irq 22
>  #1: HD-Audio Generic at 0xc4420000 irq 17
>IPv4 over IPv4 tunneling driver
>TCP cubic registered
>NET: Registered protocol family 17
>lib80211: common routines for IEEE802.11 drivers
>lib80211_crypt: registered algorithm 'NULL'
>PM: Hibernation image not present or could not be loaded.
>rtc_cmos 00:06: setting system clock to 2011-05-02 20:20:20 UTC (1304367620)
>hub 1-0:1.0: state 7 ports 3 chg 0002 evt 0000
>hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
>ehci_hcd 0000:00:1a.0: port 1 high speed
>ehci_hcd 0000:00:1a.0: GetStatus port:1 status 001005 0  ACK POWER sig=se0 PE CONNECT
>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata1.00: ATA-8: Hitachi HTS725050A9A364, PC4OC72E, max UDMA/100
>ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
>ata1.00: configured for UDMA/100
>scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS72505 PC4O PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>usb 1-1: new high speed USB device number 2 using ehci_hcd
>ehci_hcd 0000:00:1a.0: port 1 high speed
>ehci_hcd 0000:00:1a.0: GetStatus port:1 status 001005 0  ACK POWER sig=se0 PE CONNECT
>ehci_hcd 0000:00:1a.0: set dev address 2 for port 1
>ehci_hcd 0000:00:1a.0: LPM: no device attached
>usb 1-1: udev 2, busnum 1, minor = 1
>usb 1-1: New USB device found, idVendor=8087, idProduct=0020
>usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>usb 1-1: usb_probe_device
>usb 1-1: configuration #1 chosen from 1 choice
>usb 1-1: adding 1-1:1.0 (config #1, interface 0)
>hub 1-1:1.0: usb_probe_interface
>hub 1-1:1.0: usb_probe_interface - got id
>hub 1-1:1.0: USB hub found
>hub 1-1:1.0: 6 ports detected
>hub 1-1:1.0: standalone hub
>hub 1-1:1.0: individual port power switching
>hub 1-1:1.0: individual port over-current protection
>hub 1-1:1.0: Single TT
>hub 1-1:1.0: TT requires at most 8 FS bit times (666 ns)
>hub 1-1:1.0: Port indicators are supported
>hub 1-1:1.0: power on to power good time: 100ms
>hub 1-1:1.0: local power source is good
>hub 1-1:1.0: enabling power on all ports
>hub 2-0:1.0: state 7 ports 3 chg 0002 evt 0000
>hub 2-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
>ehci_hcd 0000:00:1d.0: port 1 high speed
>ehci_hcd 0000:00:1d.0: GetStatus port:1 status 001005 0  ACK POWER sig=se0 PE CONNECT
>hub 1-1:1.0: port 3: status 0101 change 0001
>hub 1-1:1.0: port 4: status 0101 change 0001
>usb 2-1: new high speed USB device number 2 using ehci_hcd
>ehci_hcd 0000:00:1d.0: port 1 high speed
>ehci_hcd 0000:00:1d.0: GetStatus port:1 status 001005 0  ACK POWER sig=se0 PE CONNECT
> sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>usb 1-1: link qh256-0001/ffff88015762ae80 start 1 [1/0 us]
>ehci_hcd 0000:00:1d.0: set dev address 2 for port 1
>ehci_hcd 0000:00:1d.0: LPM: no device attached
>usb 2-1: udev 2, busnum 2, minor = 129
>usb 2-1: New USB device found, idVendor=8087, idProduct=0020
>usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>usb 2-1: usb_probe_device
>usb 2-1: configuration #1 chosen from 1 choice
>usb 2-1: adding 2-1:1.0 (config #1, interface 0)
>hub 2-1:1.0: usb_probe_interface
>hub 2-1:1.0: usb_probe_interface - got id
>hub 2-1:1.0: USB hub found
>hub 2-1:1.0: 8 ports detected
>hub 2-1:1.0: standalone hub
>hub 2-1:1.0: individual port power switching
>hub 2-1:1.0: individual port over-current protection
>hub 2-1:1.0: Single TT
>hub 2-1:1.0: TT requires at most 8 FS bit times (666 ns)
>hub 2-1:1.0: Port indicators are supported
>hub 2-1:1.0: power on to power good time: 100ms
>hub 2-1:1.0: local power source is good
>hub 2-1:1.0: enabling power on all ports
>hub 1-1:1.0: state 7 ports 6 chg 0018 evt 0000
>hub 1-1:1.0: port 3, status 0101, change 0000, 12 Mb/s
>usb 1-1.3: new full speed USB device number 3 using ehci_hcd
>hub 2-1:1.0: port 5: status 0101 change 0001
>hub 2-1:1.0: port 6: status 0101 change 0001
>usb 1-1.3: skipped 1 descriptor after interface
>usb 1-1.3: default language 0x0409
>usb 1-1.3: udev 3, busnum 1, minor = 2
>usb 1-1.3: New USB device found, idVendor=03f0, idProduct=231d
>usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 1-1.3: Product: HP Integrated Module
>usb 1-1.3: Manufacturer: Broadcom Corp
>usb 1-1.3: usb_probe_device
>usb 1-1.3: configuration #1 chosen from 1 choice
>usb 1-1.3: adding 1-1.3:1.0 (config #1, interface 0)
>usb 1-1.3: adding 1-1.3:1.1 (config #1, interface 1)
>usb 1-1.3: adding 1-1.3:1.2 (config #1, interface 2)
>usb 1-1.3: adding 1-1.3:1.3 (config #1, interface 3)
>hub 1-1:1.0: port 4, status 0101, change 0000, 12 Mb/s
>usb 2-1: link qh256-0001/ffff88015762aa80 start 1 [1/0 us]
>Refined TSC clocksource calibration: 1196.999 MHz.
>Switching to clocksource tsc
>usb 1-1.4: new full speed USB device number 4 using ehci_hcd
>usb 1-1.4: ep0 maxpacket = 8
>usb 1-1.4: default language 0x0409
>usb 1-1.4: udev 4, busnum 1, minor = 3
>usb 1-1.4: New USB device found, idVendor=138a, idProduct=0005
>usb 1-1.4: New USB device strings: Mfr=0, Product=0, SerialNumber=1
>usb 1-1.4: SerialNumber: 0510f9f55000
>usb 1-1.4: usb_probe_device
>usb 1-1.4: configuration #1 chosen from 1 choice
>usb 1-1.4: adding 1-1.4:1.0 (config #1, interface 0)
>hub 1-1:1.0: state 7 ports 6 chg 0000 evt 0008
>hub 2-1:1.0: state 7 ports 8 chg 0060 evt 0000
>hub 2-1:1.0: port 5, status 0101, change 0000, 12 Mb/s
>Synaptics Touchpad, model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04773/0xe40000/0x5a0400
>input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input4
>EXT3-fs: barriers not enabled
>usb 2-1.5: new full speed USB device number 3 using ehci_hcd
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs (sda1): mounted filesystem with ordered data mode
>VFS: Mounted root (ext3 filesystem) readonly on device 8:1.
>Freeing unused kernel memory: 424k freed
>usb 2-1.5: ep0 maxpacket = 8
>usb 2-1.5: skipped 1 descriptor after interface
>usb 2-1.5: skipped 1 descriptor after interface
>usb 2-1.5: default language 0x0409
>usb 2-1.5: udev 3, busnum 2, minor = 130
>usb 2-1.5: New USB device found, idVendor=056a, idProduct=00e3
>usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 2-1.5: Product: ISD-V4
>usb 2-1.5: Manufacturer: Tablet
>usb 2-1.5: usb_probe_device
>usb 2-1.5: configuration #1 chosen from 1 choice
>usb 2-1.5: adding 2-1.5:1.0 (config #1, interface 0)
>usbhid 2-1.5:1.0: usb_probe_interface
>usbhid 2-1.5:1.0: usb_probe_interface - got id
>usb 2-1.5: adding 2-1.5:1.1 (config #1, interface 1)
>usbhid 2-1.5:1.1: usb_probe_interface
>usbhid 2-1.5:1.1: usb_probe_interface - got id
>hub 2-1:1.0: port 6, status 0101, change 0000, 12 Mb/s
>usb 2-1.6: new high speed USB device number 4 using ehci_hcd
>usb 2-1.6: skipped 1 descriptor after configuration
>usb 2-1.6: skipped 6 descriptors after interface
>usb 2-1.6: skipped 1 descriptor after endpoint
>usb 2-1.6: skipped 6 descriptors after interface
>usb 2-1.6: default language 0x0409
>usb 2-1.6: udev 4, busnum 2, minor = 131
>usb 2-1.6: New USB device found, idVendor=10f1, idProduct=1a16
>usb 2-1.6: New USB device strings: Mfr=2, Product=1, SerialNumber=0
>usb 2-1.6: Product: HP Webcam
>usb 2-1.6: Manufacturer: Importek
>usb 2-1.6: usb_probe_device
>usb 2-1.6: configuration #1 chosen from 1 choice
>usb 2-1.6: adding 2-1.6:1.0 (config #1, interface 0)
>usb 2-1.6: adding 2-1.6:1.1 (config #1, interface 1)
>hub 2-1:1.0: state 7 ports 8 chg 0000 evt 0040
>udev: starting version 151
>udevd (1089): /proc/1089/oom_adj is deprecated, please use /proc/1089/oom_score_adj instead.
>brcmsmac: module is from the staging directory, the quality is unknown, you have been warned.
>brcmsmac 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>brcmsmac 0000:03:00.0: setting latency timer to 64
>Linux agpgart interface v0.103
>wacom 2-1.5:1.0: usb_probe_interface
>wacom 2-1.5:1.0: usb_probe_interface - got id
>input: Wacom ISDv4 E3 Finger as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input5
>wacom 2-1.5:1.1: usb_probe_interface
>wacom 2-1.5:1.1: usb_probe_interface - got id
>input: Wacom ISDv4 E3 Pen as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.1/input/input6
>r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
>r8169 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>r8169 0000:02:00.0: setting latency timer to 64
>r8169 0000:02:00.0: no MSI. Back to INTx.
>r8169 0000:02:00.0: eth0: RTL8168d/8111d at 0xffffc90010128000, d8:d3:85:39:89:fb, XID 083000c0 IRQ 16
>[drm] Initialized drm 1.1.0 20060810
>agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
>agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
>agpgart-intel 0000:00:00.0: detected 32768K stolen memory
>agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xb0000000
>ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
>i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>i915 0000:00:02.0: setting latency timer to 64
>[drm] radeon defaulting to kernel modesetting.
>[drm] radeon kernel modesetting enabled.
>VGA switcheroo: detected switching method \_SB_.PCI0.GFX0.ATPX handle
>radeon 0000:01:00.0: enabling device (0000 -> 0003)
>radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>radeon 0000:01:00.0: setting latency timer to 64
>mtrr: no more MTRRs available
>[drm] MTRR allocation failed.  Graphics performance may suffer.
>[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
>[drm] Driver supports precise vblank timestamp query.
>vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
>vgaarb: transferring owner from PCI:0000:00:02.0 to PCI:0000:01:00.0
>fbcon: inteldrmfb (fb0) is primary device
>Console: switching to colour frame buffer device 160x50
>fb0: inteldrmfb frame buffer device
>drm: registered panic notifier
>[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
>acpi device:02: registered as cooling_device5
>input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7
>ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
>[Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
>acpi device:0b: registered as cooling_device6
>input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:09/LNXVIDEO:01/input/input8
>ACPI: Video Device [PEGP] (multi-head: yes  rom: no  post: no)
>[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
>[drm] initializing kernel modesetting (CEDAR 0x1002:0x68E0).
>[drm] register mmio base: 0xC4400000
>[drm] register mmio size: 131072
>vga_switcheroo: enabled
>radeon atpx: version is 1
>usb 2-1: clear tt buffer port 5, a3 ep0 t80020c82
>usb 2-1.5: modprobe timed out on ep0out len=0/2
>usbcore: registered new interface driver wacom
>wacom: v1.52:USB Wacom tablet driver
>atkbd serio0: Unknown key pressed (translated set 2, code 0x81 on isa0060/serio0).
>atkbd serio0: Use 'setkeycodes e001 <keycode>' to make it known.
>ATOM BIOS: HP
>radeon 0000:01:00.0: GPU softreset 
>radeon 0000:01:00.0:   GRBM_STATUS=0xFFFFFFFF
>radeon 0000:01:00.0:   GRBM_STATUS_SE0=0xFFFFFFFF
>radeon 0000:01:00.0:   GRBM_STATUS_SE1=0xFFFFFFFF
>radeon 0000:01:00.0:   SRBM_STATUS=0xFFFFFFFF
>radeon 0000:01:00.0: Wait for MC idle timedout !
>radeon 0000:01:00.0:   GRBM_SOFT_RESET=0x00007F6B
>radeon 0000:01:00.0:   GRBM_STATUS=0xFFFFFFFF
>radeon 0000:01:00.0:   GRBM_STATUS_SE0=0xFFFFFFFF
>radeon 0000:01:00.0:   GRBM_STATUS_SE1=0xFFFFFFFF
>radeon 0000:01:00.0:   SRBM_STATUS=0xFFFFFFFF
>radeon 0000:01:00.0: limiting VRAM
>radeon 0000:01:00.0: VRAM: 3584M 0x0000000000000000 - 0x00000000DFFFFFFF (3584M used)
>radeon 0000:01:00.0: GTT: 512M 0x00000000E0000000 - 0x00000000FFFFFFFF
>mtrr: no more MTRRs available
>[drm] Detected VRAM RAM=3584M, BAR=256M
>[drm] RAM width 128bits DDR
>[TTM] Zone  kernel: Available graphics memory: 1925620 kiB.
>[TTM] Initializing pool allocator.
>[drm] radeon: 3584M of VRAM memory ready
>[drm] radeon: 512M of GTT memory ready.
>[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
>[drm] Driver supports precise vblank timestamp query.
>radeon 0000:01:00.0: IH ring buffer overflow (0xFFFFFFFF, 0, 15)
>[drm] radeon: irq initialized.
>[drm] GART: num cpu pages 131072, num gpu pages 131072
>[drm] Loading CEDAR Microcode
>radeon 0000:01:00.0: Wait for MC idle timedout !
>radeon 0000:01:00.0: Wait for MC idle timedout !
>radeon 0000:01:00.0: WB enabled
>BUG: unable to handle kernel paging request at ffffc90410981ffc
>IP: [<ffffffffa0216405>] evergreen_cp_resume+0x4b5/0xe05 [radeon]
>PGD 15740e067 PUD 0 
>Oops: 0002 [#1] SMP 
>last sysfs file: /sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/uevent
>CPU 2 
>Modules linked in: radeon(+) i915 ttm drm_kms_helper intel_agp intel_gtt drm i2c_algo_bit r8169 cfbcopyarea wacom agpgart cfbimgblt cfbfillrect brcmsmac(C)
>
>Pid: 1189, comm: modprobe Tainted: G         C  2.6.39-rc5 #14 Hewlett-Packard HP TouchSmart tm2 Notebook PC   /1486
>RIP: 0010:[<ffffffffa0216405>]  [<ffffffffa0216405>] evergreen_cp_resume+0x4b5/0xe05 [radeon]
>RSP: 0018:ffff880155007cb8  EFLAGS: 00010286
>RAX: 0000000000000000 RBX: ffff8801565ac000 RCX: 000000004eced9ab
>RDX: ffffc90410981ffc RSI: 0000000000000007 RDI: ffff8801565ac000
>RBP: 0000000000000011 R08: 0000000000000005 R09: 000000004eaabd3c
>R10: 0000000000000000 R11: ffff8801567fddb8 R12: 0000000000000911
>R13: 0000000000c10027 R14: ffff880157658000 R15: ffff880157658380
>FS:  00007f7f9416c700(0000) GS:ffff880157d00000(0000) knlGS:0000000000000000
>CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
>CR2: ffffc90410981ffc CR3: 0000000155fd2000 CR4: 00000000000006e0
>DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
>DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
>Process modprobe (pid: 1189, threadinfo ffff880155006000, task ffff8801577d61e0)
>Stack:
> ffff8801565ac000 0000000000000000 00000000fffffff4 ffffffffa02199e0
> ffff8801565ac000 ffff8801565ac000 ffff8801565ac000 ffffffffa01ae15c
> ffff880157658000 ffff880157658000 ffff8801565ac000 ffffffffa01af6d4
>Call Trace:
> [<ffffffffa02199e0>] ? evergreen_init+0x18d/0x239 [radeon]
> [<ffffffffa01ae15c>] ? radeon_device_init+0x39b/0x411 [radeon]
> [<ffffffffa01af6d4>] ? radeon_driver_load_kms+0xb9/0x11d [radeon]
> [<ffffffffa00fd005>] ? drm_get_pci_dev+0x14f/0x259 [drm]
> [<ffffffff8116f774>] ? local_pci_probe+0x49/0x92
> [<ffffffff81170416>] ? pci_device_probe+0x5b/0x87
> [<ffffffff811da63e>] ? driver_sysfs_add+0x66/0x8d
> [<ffffffff811da77f>] ? driver_probe_device+0xa8/0x138
> [<ffffffff811da85e>] ? __driver_attach+0x4f/0x6f
> [<ffffffff811da80f>] ? driver_probe_device+0x138/0x138
> [<ffffffff811d9ff4>] ? bus_for_each_dev+0x44/0x78
> [<ffffffff811d99a2>] ? bus_add_driver+0xb9/0x201
> [<ffffffff811dad75>] ? driver_register+0x90/0xf8
> [<ffffffff8117065d>] ? __pci_register_driver+0x4e/0xbe
> [<ffffffffa0261000>] ? 0xffffffffa0260fff
> [<ffffffffa0261000>] ? 0xffffffffa0260fff
> [<ffffffff81000208>] ? do_one_initcall+0x78/0x126
> [<ffffffff810509cc>] ? sys_init_module+0x97/0x1d3
> [<ffffffff8137983b>] ? system_call_fastpath+0x16/0x1b
>Code: 15 48 c7 c6 c0 29 23 a0 48 c7 c7 c9 4e 24 a0 31 c0 e8 80 09 16 e1 8b 83 2c 0b 00 00 89 c2 ff c0 48 c1 e2 02 48 03 93 20 0b 00 00 <c7> 02 00 44 05 c0 23 83 4c 0b 00 00 ff 8b 38 0b 00 00 89 83 2c 
>RIP  [<ffffffffa0216405>] evergreen_cp_resume+0x4b5/0xe05 [radeon]
> RSP <ffff880155007cb8>
>CR2: ffffc90410981ffc
>---[ end trace ae0e08994d728082 ]---
>EXT3-fs (sda1): using internal journal
>EXT3-fs: barriers not enabled
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs (sda3): warning: maximal mount count reached, running e2fsck is recommended
>EXT3-fs (sda3): using internal journal
>EXT3-fs (sda3): mounted filesystem with ordered data mode
>EXT3-fs: barriers not enabled
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs (sda5): warning: maximal mount count reached, running e2fsck is recommended
>EXT3-fs (sda5): using internal journal
>EXT3-fs (sda5): mounted filesystem with ordered data mode
>EXT2-fs (sda6): warning: mounting unchecked fs, running e2fsck is recommended
>r8169 0000:02:00.0: eth0: unable to apply firmware patch
>r8169 0000:02:00.0: eth0: link down
>Adding 4000180k swap on /dev/sda2.  Priority:-1 extents:1 across:4000180k 
>radeon: switched off
>BUG: unable to handle kernel NULL pointer dereference at           (null)
>IP: [<ffffffffa01ad9e4>] radeon_suspend_kms+0x77/0x1ed [radeon]
>PGD 156ff5067 PUD 157538067 PMD 0 
>Oops: 0000 [#2] SMP 
>last sysfs file: /sys/devices/pci0000:00/0000:00:1c.0/0000:02:00.0/firmware/0000:02:00.0/loading
>CPU 3 
>Modules linked in: radeon(+) i915 ttm drm_kms_helper intel_agp intel_gtt drm i2c_algo_bit r8169 cfbcopyarea wacom agpgart cfbimgblt cfbfillrect brcmsmac(C)
>
>Pid: 1917, comm: graphics.start Tainted: G      D  C  2.6.39-rc5 #14 Hewlett-Packard HP TouchSmart tm2 Notebook PC   /1486
>RIP: 0010:[<ffffffffa01ad9e4>]  [<ffffffffa01ad9e4>] radeon_suspend_kms+0x77/0x1ed [radeon]
>RSP: 0018:ffff880156f3fe08  EFLAGS: 00010283
>RAX: 000000000000001b RBX: ffff8801565ac000 RCX: 0000000000000000
>RDX: 0000000000000e0e RSI: 0000000000000002 RDI: ffff880157658000
>RBP: ffff880157658000 R08: 0000000000000000 R09: 0000000000000000
>R10: ffff88015530afc0 R11: 0000000000000009 R12: fffffffffffffdb0
>R13: ffff880157658408 R14: 00007fff38e45c2c R15: 0000000000000001
>FS:  00007fedc9305700(0000) GS:ffff880157d80000(0000) knlGS:0000000000000000
>CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
>CR2: 0000000000000000 CR3: 000000015646c000 CR4: 00000000000006e0
>DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
>DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
>Process graphics.start (pid: 1917, threadinfo ffff880156f3e000, task ffff88015521f230)
>Stack:
> 0000000256f3fe18 ffff880155d18248 0000000000000000 ffff880157658000
> 00000000ffffffff 0000000000000004 ffff880157536540 00007fff38e45c2c
> 0000000000000001 ffffffffa01adc7b ffff8801552af400 ffffffff81626c68
>Call Trace:
> [<ffffffffa01adc7b>] ? radeon_switcheroo_set_state+0x7d/0x8b [radeon]
> [<ffffffff811d60d4>] ? vga_switchoff+0xc/0x2e
> [<ffffffff811d6594>] ? vga_switcheroo_debugfs_write+0xcb/0x314
> [<ffffffff8108fe82>] ? vfs_write+0xad/0x12e
> [<ffffffff8108ffb9>] ? sys_write+0x45/0x6e
> [<ffffffff8137983b>] ? system_call_fastpath+0x16/0x1b
>Code: 8d af 08 04 00 00 49 81 ec 50 02 00 00 eb 1c 4c 89 e7 be 03 00 00 00 e8 0c 59 f7 ff 4d 8b a4 24 50 02 00 00 49 81 ec 50 02 00 00 
> 8b 84 24 50 02 00 00 0f 18 08 49 8d 84 24 50 02 00 00 49 39 
>RIP  [<ffffffffa01ad9e4>] radeon_suspend_kms+0x77/0x1ed [radeon]
> RSP <ffff880156f3fe08>
>CR2: 0000000000000000
>---[ end trace ae0e08994d728083 ]---
>wlan0: authenticate with 00:1c:4a:07:7f:76 (try 1)
>wlan0: authenticated
>wlan0: associate with 00:1c:4a:07:7f:76 (try 1)
>wlan0: RX AssocResp from 00:1c:4a:07:7f:76 (capab=0x431 status=0 aid=2)
>wlan0: associated

Actions: View | Splinter Review

Attachments on bug 36783: 46262

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.