Attachment 46734 Details for Bug 37220 – dmesg

dmesg

dmesg (text/plain), 30.18 KB, created by Jure Repinc on 2011-05-15 04:00:01 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Jure Repinc

Created: 2011-05-15 04:00:01 UTC

Size: 30.18 KB

patch

obsolete

>0x60000000-0xfcffffffff]
>bus: 00 index 2 [mem 0x000a0000-0x000bffff]
>ACPI: bus type pci registered
>PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
>PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
>PCI: Using configuration type 1 for base access
>bio: create slab <bio-0> at 0
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: Power Resource [C223] (off)
>ACPI: Power Resource [C217] (on)
>ACPI: Power Resource [C34B] (off)
>ACPI: Power Resource [C34C] (off)
>ACPI: Power Resource [C34D] (off)
>ACPI: Power Resource [C34E] (off)
>ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
>ACPI: No dock devices found.
>PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
>ACPI: PCI Root Bridge [C074] (domain 0000 [bus 00-ff])
>pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
>pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)
>pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
>pci_root PNP0A03:00: host bridge window [mem 0x60000000-0xfedfffff] (ignored)
>pci_root PNP0A03:00: host bridge window [mem 0xfee01000-0xffffffff] (ignored)
>pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored)
>pci 0000:00:00.0: [1002:5950] type 0 class 0x000600
>pci 0000:00:01.0: [1002:5a3f] type 1 class 0x000604
>pci 0000:00:04.0: [1002:5a36] type 1 class 0x000604
>pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:04.0: PME# disabled
>pci 0000:00:05.0: [1002:5a37] type 1 class 0x000604
>pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:05.0: PME# disabled
>pci 0000:00:06.0: [1002:5a38] type 1 class 0x000604
>pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:06.0: PME# disabled
>pci 0000:00:12.0: [1002:4379] type 0 class 0x000101
>pci 0000:00:12.0: reg 10: [io  0x9000-0x9007]
>pci 0000:00:12.0: reg 14: [io  0x9008-0x900b]
>pci 0000:00:12.0: reg 18: [io  0x9010-0x9017]
>pci 0000:00:12.0: reg 1c: [io  0x7018-0x701b]
>pci 0000:00:12.0: reg 20: [io  0x7020-0x702f]
>pci 0000:00:12.0: reg 24: [mem 0xd4409000-0xd44091ff]
>pci 0000:00:12.0: reg 30: [mem 0x00000000-0x0007ffff pref]
>pci 0000:00:12.0: supports D1 D2
>pci 0000:00:13.0: [1002:4374] type 0 class 0x000c03
>pci 0000:00:13.0: reg 10: [mem 0xd4401000-0xd4401fff]
>pci 0000:00:13.1: [1002:4375] type 0 class 0x000c03
>pci 0000:00:13.1: reg 10: [mem 0xd4402000-0xd4402fff]
>pci 0000:00:13.2: [1002:4373] type 0 class 0x000c03
>pci 0000:00:13.2: reg 10: [mem 0xd4403000-0xd4403fff]
>pci 0000:00:13.2: supports D1 D2
>pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
>pci 0000:00:13.2: PME# disabled
>pci 0000:00:14.0: [1002:4372] type 0 class 0x000c05
>pci 0000:00:14.0: reg 10: [io  0x8200-0x820f]
>pci 0000:00:14.0: reg 14: [mem 0xd4404000-0xd44043ff]
>pci 0000:00:14.0: SB4X0 revision 0x82
>pci 0000:00:14.0: Force enabled HPET at 0xfed00000
>pci 0000:00:14.1: [1002:4376] type 0 class 0x000101
>pci 0000:00:14.1: reg 10: [io  0x0000-0x0007]
>pci 0000:00:14.1: reg 14: [io  0x0000-0x0003]
>pci 0000:00:14.1: reg 18: [io  0x0000-0x0007]
>pci 0000:00:14.1: reg 1c: [io  0x0000-0x0003]
>pci 0000:00:14.1: reg 20: [io  0x7040-0x704f]
>pci 0000:00:14.2: [1002:437b] type 0 class 0x000403
>pci 0000:00:14.2: reg 10: [mem 0xd4408000-0xd440bfff 64bit]
>pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
>pci 0000:00:14.2: PME# disabled
>pci 0000:00:14.3: [1002:4377] type 0 class 0x000601
>pci 0000:00:14.4: [1002:4371] type 1 class 0x000604
>pci 0000:00:18.0: [1022:1100] type 0 class 0x000600
>pci 0000:00:18.1: [1022:1101] type 0 class 0x000600
>pci 0000:00:18.2: [1022:1102] type 0 class 0x000600
>pci 0000:00:18.3: [1022:1103] type 0 class 0x000600
>PCI: peer root bus 00 res updated from pci conf
>pci 0000:01:05.0: [1002:5975] type 0 class 0x000300
>pci 0000:01:05.0: reg 10: [mem 0xc0000000-0xc7ffffff pref]
>pci 0000:01:05.0: reg 14: [io  0x6000-0x60ff]
>pci 0000:01:05.0: reg 18: [mem 0xd4300000-0xd430ffff]
>pci 0000:01:05.0: reg 30: [mem 0x00000000-0x0001ffff pref]
>pci 0000:01:05.0: supports D1 D2
>pci 0000:00:01.0: PCI bridge to [bus 01-01]
>pci 0000:00:01.0:   bridge window [io  0x6000-0x6fff]
>pci 0000:00:01.0:   bridge window [mem 0xd4300000-0xd43fffff]
>pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xc7ffffff 64bit pref]
>pci 0000:00:04.0: PCI bridge to [bus 10-10]
>pci 0000:00:04.0:   bridge window [io  0x4000-0x5fff]
>pci 0000:00:04.0:   bridge window [mem 0xd0000000-0xd3ffffff]
>pci 0000:00:04.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
>pci 0000:00:05.0: PCI bridge to [bus 20-20]
>pci 0000:00:05.0:   bridge window [io  0x2000-0x3fff]
>pci 0000:00:05.0:   bridge window [mem 0xcc000000-0xcfffffff]
>pci 0000:00:05.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
>pci 0000:30:00.0: [14e4:4311] type 0 class 0x000280
>pci 0000:30:00.0: reg 10: [mem 0xc8000000-0xc8003fff]
>pci 0000:30:00.0: supports D1 D2
>pci 0000:30:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
>pci 0000:00:06.0: PCI bridge to [bus 30-30]
>pci 0000:00:06.0:   bridge window [io  0xf000-0x0000] (disabled)
>pci 0000:00:06.0:   bridge window [mem 0xc8000000-0xc80fffff]
>pci 0000:00:06.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
>pci 0000:02:01.0: [14e4:169c] type 0 class 0x000200
>pci 0000:02:01.0: reg 10: [mem 0xd4000000-0xd400ffff]
>pci 0000:02:01.0: PME# supported from D3hot D3cold
>pci 0000:02:01.0: PME# disabled
>pci 0000:02:04.0: [104c:8039] type 2 class 0x000607
>pci 0000:02:04.0: reg 10: [mem 0xd4010000-0xd4010fff]
>pci 0000:02:04.0: supports D1 D2
>pci 0000:02:04.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:02:04.0: PME# disabled
>pci 0000:02:04.1: [104c:803a] type 0 class 0x000c00
>pci 0000:02:04.1: reg 10: [mem 0xd4011000-0xd40117ff]
>pci 0000:02:04.1: reg 14: [mem 0xd4014000-0xd4017fff]
>pci 0000:02:04.1: supports D1 D2
>pci 0000:02:04.1: PME# supported from D0 D1 D2 D3hot
>pci 0000:02:04.1: PME# disabled
>pci 0000:02:04.2: [104c:803b] type 0 class 0x000180
>pci 0000:02:04.2: reg 10: [mem 0xd4018000-0xd4018fff]
>pci 0000:02:04.2: supports D1 D2
>pci 0000:02:04.2: PME# supported from D0 D1 D2 D3hot
>pci 0000:02:04.2: PME# disabled
>pci 0000:02:04.3: [104c:803c] type 0 class 0x000805
>pci 0000:02:04.3: reg 10: [mem 0xd4019000-0xd40190ff]
>pci 0000:02:04.3: supports D1 D2
>pci 0000:02:04.3: PME# supported from D0 D1 D2 D3hot
>pci 0000:02:04.3: PME# disabled
>pci 0000:00:14.4: PCI bridge to [bus 02-03] (subtractive decode)
>pci 0000:00:14.4:   bridge window [io  0xf000-0x0000] (disabled)
>pci 0000:00:14.4:   bridge window [mem 0xd4000000-0xd42fffff]
>pci 0000:00:14.4:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
>pci 0000:00:14.4:   bridge window [io  0x0000-0xffff] (subtractive decode)
>pci 0000:00:14.4:   bridge window [mem 0x60000000-0xfcffffffff] (subtractive decode)
>pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
>pci_bus 0000:03: [bus 03-06] partially hidden behind transparent bridge 0000:02 [bus 02-03]
>pci_bus 0000:00: on NUMA node 0
>ACPI: PCI Interrupt Routing Table [\_SB_.C074._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.C074.C075._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.C074.C0DF._PRT]
> pci0000:00: Requesting ACPI _OSC control (0x1d)
>Unable to assume _OSC PCIe control. Disabling ASPM
>ACPI: PCI Interrupt Link [C125] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [C126] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [C127] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [C128] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [C129] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [C12A] (IRQs 9) *0, disabled.
>ACPI: PCI Interrupt Link [C12B] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [C12C] (IRQs *10 11)
>vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
>vgaarb: loaded
>SCSI subsystem initialized
>libata version 3.00 loaded.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: pci_cache_line_size set to 64 bytes
>pci 0000:00:14.2: address space collision: [mem 0xd4408000-0xd440bfff 64bit] conflicts with 0000:00:12.0 [mem 0xd4409000-0xd44091ff]
>reserve RAM buffer: 000000000009fc00 - 000000000009ffff 
>reserve RAM buffer: 0000000057fd0000 - 0000000057ffffff 
>hpet clockevent registered
>HPET: 4 timers in total, 0 timers will be used for per-cpu timer
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
>hpet0: 4 comparators, 32-bit 14.318180 MHz counter
>Switching to clocksource hpet
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp 00:00: [mem 0x00000000-0x0009ffff]
>pnp 00:00: [mem 0x000e0000-0x000fffff]
>pnp 00:00: [mem 0x00100000-0x57ffffff]
>system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
>system 00:00: [mem 0x000e0000-0x000fffff] could not be reserved
>system 00:00: [mem 0x00100000-0x57ffffff] could not be reserved
>system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
>Switched to NOHz mode on CPU #1
>Switched to NOHz mode on CPU #0
>pnp 00:01: [bus 00-ff]
>pnp 00:01: [io  0x0cf8-0x0cff]
>pnp 00:01: [io  0x0000-0x0cf7 window]
>pnp 00:01: [io  0x0d00-0xffff window]
>pnp 00:01: [mem 0x000a0000-0x000bffff window]
>pnp 00:01: [mem 0x60000000-0xfedfffff window]
>pnp 00:01: [mem 0xfee01000-0xffffffff window]
>pnp 00:01: [mem 0x000d0000-0x000dffff window]
>pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active)
>pnp 00:02: [io  0x0520-0x052f]
>pnp 00:02: [io  0x0530-0x053f]
>pnp 00:02: [mem 0xfed40000-0xfed44fff]
>pnp 00:02: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
>pnp 00:03: [io  0x00f0-0x00ff]
>pnp 00:03: [irq 13]
>pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
>pnp 00:04: [io  0x0000-0x000f]
>pnp 00:04: [io  0x0080-0x008f]
>pnp 00:04: [io  0x00c0-0x00df]
>pnp 00:04: [dma 4]
>pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
>pnp 00:05: [io  0x0061]
>pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
>pnp 00:06: [io  0x0070-0x0071]
>pnp 00:06: [io  0x0072-0x0073]
>pnp 00:06: [irq 8]
>pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
>pnp 00:07: [io  0x0060]
>pnp 00:07: [io  0x0064]
>pnp 00:07: [irq 1]
>pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
>pnp 00:08: [irq 12]
>pnp 00:08: Plug and Play ACPI device, IDs SYN0118 SYN0100 SYN0002 PNP0f13 (active)
>pnp 00:09: [io  0x0010-0x001f]
>pnp 00:09: [io  0x002e-0x002f]
>pnp 00:09: [io  0x004e-0x004f]
>pnp 00:09: [io  0x0092]
>pnp 00:09: [io  0x00b0-0x00b1]
>pnp 00:09: [io  0x040b]
>pnp 00:09: [io  0x04d0-0x04d1]
>pnp 00:09: [io  0x04d6]
>pnp 00:09: [io  0x0500-0x051f]
>pnp 00:09: [io  0x0c00-0x0c01]
>pnp 00:09: [io  0x0c14]
>pnp 00:09: [io  0x0c50-0x0c51]
>pnp 00:09: [io  0x0c52]
>pnp 00:09: [io  0x0c6c]
>pnp 00:09: [io  0x0c6f]
>pnp 00:09: [io  0x0cd4-0x0cdf]
>pnp 00:09: [mem 0xffb00000-0xffbfffff]
>pnp 00:09: [mem 0xfff00000-0xffffffff]
>system 00:09: [io  0x040b] has been reserved
>system 00:09: [io  0x04d0-0x04d1] has been reserved
>system 00:09: [io  0x04d6] has been reserved
>system 00:09: [io  0x0500-0x051f] has been reserved
>system 00:09: [io  0x0c00-0x0c01] has been reserved
>system 00:09: [io  0x0c14] has been reserved
>system 00:09: [io  0x0c50-0x0c51] has been reserved
>system 00:09: [io  0x0c52] has been reserved
>system 00:09: [io  0x0c6c] has been reserved
>system 00:09: [io  0x0c6f] has been reserved
>system 00:09: [io  0x0cd4-0x0cdf] has been reserved
>system 00:09: [mem 0xffb00000-0xffbfffff] could not be reserved
>system 00:09: [mem 0xfff00000-0xffffffff] has been reserved
>system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp 00:0a: [io  0x8000-0x802f]
>pnp 00:0a: [io  0x8100-0x811f]
>pnp 00:0a: [mem 0xe0000000-0xefffffff]
>pnp 00:0a: [mem 0xfec00000-0xfec00fff]
>system 00:0a: [io  0x8000-0x802f] has been reserved
>system 00:0a: [io  0x8100-0x811f] has been reserved
>system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
>system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
>system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp 00:0b: [mem 0x000cf000-0x000cffff]
>pnp 00:0b: [mem 0x58000000-0x5fffffff]
>pnp 00:0b: [mem 0xfee00000-0xfee00fff]
>system 00:0b: [mem 0x000cf000-0x000cffff] has been reserved
>system 00:0b: [mem 0x58000000-0x5fffffff] has been reserved
>system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
>system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp: PnP ACPI: found 12 devices
>ACPI: ACPI bus type pnp unregistered
>pci 0000:00:14.4: BAR 9: assigned [mem 0x60000000-0x63ffffff pref]
>pci 0000:00:12.0: BAR 6: assigned [mem 0x64000000-0x6407ffff pref]
>pci 0000:00:14.2: BAR 0: assigned [mem 0x64080000-0x64083fff 64bit]
>pci 0000:00:14.2: BAR 0: set to [mem 0x64080000-0x64083fff 64bit] (PCI address [0x64080000-0x64083fff])
>pci 0000:00:14.4: BAR 7: assigned [io  0x1000-0x1fff]
>pci 0000:01:05.0: BAR 6: assigned [mem 0xd4320000-0xd433ffff pref]
>pci 0000:00:01.0: PCI bridge to [bus 01-01]
>pci 0000:00:01.0:   bridge window [io  0x6000-0x6fff]
>pci 0000:00:01.0:   bridge window [mem 0xd4300000-0xd43fffff]
>pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xc7ffffff 64bit pref]
>pci 0000:00:04.0: PCI bridge to [bus 10-10]
>pci 0000:00:04.0:   bridge window [io  0x4000-0x5fff]
>pci 0000:00:04.0:   bridge window [mem 0xd0000000-0xd3ffffff]
>pci 0000:00:04.0:   bridge window [mem pref disabled]
>pci 0000:00:05.0: PCI bridge to [bus 20-20]
>pci 0000:00:05.0:   bridge window [io  0x2000-0x3fff]
>pci 0000:00:05.0:   bridge window [mem 0xcc000000-0xcfffffff]
>pci 0000:00:05.0:   bridge window [mem pref disabled]
>pci 0000:00:06.0: PCI bridge to [bus 30-30]
>pci 0000:00:06.0:   bridge window [io  disabled]
>pci 0000:00:06.0:   bridge window [mem 0xc8000000-0xc80fffff]
>pci 0000:00:06.0:   bridge window [mem pref disabled]
>pci 0000:02:04.0: BAR 9: assigned [mem 0x60000000-0x63ffffff pref]
>pci 0000:02:04.0: BAR 10: assigned [mem 0x68000000-0x6bffffff]
>pci 0000:02:04.0: BAR 7: assigned [io  0x1000-0x10ff]
>pci 0000:02:04.0: BAR 8: assigned [io  0x1400-0x14ff]
>pci 0000:02:04.0: CardBus bridge to [bus 03-06]
>pci 0000:02:04.0:   bridge window [io  0x1000-0x10ff]
>pci 0000:02:04.0:   bridge window [io  0x1400-0x14ff]
>pci 0000:02:04.0:   bridge window [mem 0x60000000-0x63ffffff pref]
>pci 0000:02:04.0:   bridge window [mem 0x68000000-0x6bffffff]
>pci 0000:00:14.4: PCI bridge to [bus 02-03]
>pci 0000:00:14.4:   bridge window [io  0x1000-0x1fff]
>pci 0000:00:14.4:   bridge window [mem 0xd4000000-0xd42fffff]
>pci 0000:00:14.4:   bridge window [mem 0x60000000-0x63ffffff pref]
>pci 0000:00:04.0: setting latency timer to 64
>pci 0000:00:05.0: setting latency timer to 64
>pci 0000:00:06.0: setting latency timer to 64
>pci 0000:02:04.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
>pci_bus 0000:00: resource 5 [mem 0x60000000-0xfcffffffff]
>pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
>pci_bus 0000:01: resource 0 [io  0x6000-0x6fff]
>pci_bus 0000:01: resource 1 [mem 0xd4300000-0xd43fffff]
>pci_bus 0000:01: resource 2 [mem 0xc0000000-0xc7ffffff 64bit pref]
>pci_bus 0000:10: resource 0 [io  0x4000-0x5fff]
>pci_bus 0000:10: resource 1 [mem 0xd0000000-0xd3ffffff]
>pci_bus 0000:20: resource 0 [io  0x2000-0x3fff]
>pci_bus 0000:20: resource 1 [mem 0xcc000000-0xcfffffff]
>pci_bus 0000:30: resource 1 [mem 0xc8000000-0xc80fffff]
>pci_bus 0000:02: resource 0 [io  0x1000-0x1fff]
>pci_bus 0000:02: resource 1 [mem 0xd4000000-0xd42fffff]
>pci_bus 0000:02: resource 2 [mem 0x60000000-0x63ffffff pref]
>pci_bus 0000:02: resource 4 [io  0x0000-0xffff]
>pci_bus 0000:02: resource 5 [mem 0x60000000-0xfcffffffff]
>pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff]
>pci_bus 0000:03: resource 0 [io  0x1000-0x10ff]
>pci_bus 0000:03: resource 1 [io  0x1400-0x14ff]
>pci_bus 0000:03: resource 2 [mem 0x60000000-0x63ffffff pref]
>pci_bus 0000:03: resource 3 [mem 0x68000000-0x6bffffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
>TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 262144 bind 65536)
>TCP reno registered
>UDP hash table entries: 1024 (order: 3, 32768 bytes)
>UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
>NET: Registered protocol family 1
>pci 0000:00:00.0: MSI quirk detected; MSI disabled
>pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
>pci 0000:01:05.0: Boot video device
>PCI: CLS 64 bytes, default 64
>fuse init (API version 7.16)
>msgmni has been set to 2755
>NET: Registered protocol family 38
>io scheduler noop registered
>io scheduler cfq registered (default)
>pcieport 0000:00:04.0: setting latency timer to 64
>pcieport 0000:00:05.0: setting latency timer to 64
>pcieport 0000:00:06.0: setting latency timer to 64
>ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
>ACPI: AC Adapter [C1BD] (on-line)
>input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0
>ACPI: Sleep Button [C25A]
>input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
>ACPI: Lid Switch [C25B]
>input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
>ACPI: Power Button [PWRF]
>ACPI: Fan [C34F] (off)
>ACPI: Fan [C350] (off)
>ACPI: Fan [C351] (off)
>ACPI: Fan [C352] (off)
>ACPI: acpi_idle registered with cpuidle
>ACPI: processor limited to max C-state 1
>thermal LNXTHERM:00: registered as thermal_zone0
>ACPI: Thermal Zone [TZ1] (67 C)
>thermal LNXTHERM:01: registered as thermal_zone1
>ACPI: Thermal Zone [TZ2] (55 C)
>thermal LNXTHERM:02: registered as thermal_zone2
>ACPI: Thermal Zone [TZ3] (30 C)
>Real Time Clock Driver v1.12b
>Linux agpgart interface v0.103
>brd: module loaded
>loop: module loaded
>sata_sil 0000:00:12.0: version 2.4
>sata_sil 0000:00:12.0: quirky BIOS, skipping spindown on poweroff and hibernation
>sata_sil 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>scsi0 : sata_sil
>scsi1 : sata_sil
>ata1: SATA max UDMA/100 mmio m512@0xd4409000 tf 0xd4409080 irq 16
>ata2: SATA max UDMA/100 mmio m512@0xd4409000 tf 0xd44090c0 irq 16
>pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>scsi2 : pata_atiixp
>scsi3 : pata_atiixp
>ata3: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x7040 irq 14
>ata4: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x7048 irq 15
>i8042: PNP: PS/2 Controller [PNP0303:C214,PNP0f13:C215] at 0x60,0x64 irq 1,12
>i8042: Detected active multiplexing controller, rev 1.1
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX0 port at 0x60,0x64 irq 12
>serio: i8042 AUX1 port at 0x60,0x64 irq 12
>serio: i8042 AUX2 port at 0x60,0x64 irq 12
>serio: i8042 AUX3 port at 0x60,0x64 irq 12
>mousedev: PS/2 mouse device common for all mice
>cpuidle: using governor ladder
>cpuidle: using governor menu
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 17
>NET: Registered protocol family 15
>powernow-k8: Found 1 AMD Turion(tm) 64 X2 Mobile Technology TL-56 (2 cpu cores) (version 2.20.00)
>powernow-k8: fid 0xa (1800 MHz), vid 0x13
>powernow-k8: fid 0x8 (1600 MHz), vid 0x15
>powernow-k8: fid 0x0 (800 MHz), vid 0x1e
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
>ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
>ACPI: Battery Slot [C1BF] (battery present)
>ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
>ACPI: Battery Slot [C1BE] (battery absent)
>ata3.00: ATAPI: HL-DT-ST DVDRAM GMA-4082N, HQ04, max MWDMA2
>ata3.00: configured for MWDMA2
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.00: ATA-7: FUJITSU MHV2080BH PL, 892C, max UDMA/100
>ata1.00: 156301488 sectors, multi 16: LBA48 
>ata1.00: configured for UDMA/100
>scsi 0:0:0:0: Direct-Access     ATA      FUJITSU MHV2080B 892C PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4
>sd 0:0:0:0: [sda] Attached SCSI disk
>Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04793/0x300000/0x0
>serio: Synaptics pass-through port at isa0060/serio4/input0
>input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input4
>ata2: SATA link down (SStatus 0 SControl 300)
>scsi 2:0:0:0: CD-ROM            HL-DT-ST DVDRAM GMA-4082N HQ04 PQ: 0 ANSI: 5
>sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
>cdrom: Uniform CD-ROM driver Revision: 3.20
>sr 2:0:0:0: Attached scsi CD-ROM sr0
>sr 2:0:0:0: Attached scsi generic sg1 type 5
>registered taskstats version 1
>REISERFS (device sda2): found reiserfs format "3.6" with standard journal
>REISERFS (device sda2): using ordered data mode
>REISERFS (device sda2): journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>REISERFS (device sda2): checking transaction log (sda2)
>REISERFS (device sda2): Using r5 hash to sort names
>VFS: Mounted root (reiserfs filesystem) readonly on device 8:2.
>Freeing unused kernel memory: 444k freed
>udevd[800]: starting version 168
>wmi: Mapper loaded
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ehci_hcd 0000:00:13.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19
>ehci_hcd 0000:00:13.2: EHCI Host Controller
>ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:13.2: irq 19, io mem 0xd4403000
>ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.39-rc7 ehci_hcd
>usb usb1: SerialNumber: 0000:00:13.2
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>ohci_hcd 0000:00:13.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
>ohci_hcd 0000:00:13.0: OHCI Host Controller
>ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:13.0: irq 19, io mem 0xd4401000
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: OHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.39-rc7 ohci_hcd
>usb usb2: SerialNumber: 0000:00:13.0
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 4 ports detected
>ohci_hcd 0000:00:13.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
>ohci_hcd 0000:00:13.1: OHCI Host Controller
>ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
>ohci_hcd 0000:00:13.1: irq 19, io mem 0xd4402000
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: OHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.39-rc7 ohci_hcd
>usb usb3: SerialNumber: 0000:00:13.1
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 4 ports detected
>yenta_cardbus 0000:02:04.0: CardBus bridge found [103c:30b0]
>yenta_cardbus 0000:02:04.0: Enabling burst memory read transactions
>yenta_cardbus 0000:02:04.0: Using INTVAL to route CSC interrupts to PCI
>yenta_cardbus 0000:02:04.0: Routing CardBus interrupts to PCI
>yenta_cardbus 0000:02:04.0: TI: mfunc 0x01a11002, devctl 0x64
>b43-pci-bridge 0000:30:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>b43-pci-bridge 0000:30:00.0: setting latency timer to 64
>ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x11, vendor 0x4243)
>ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x0A, vendor 0x4243)
>ssb: Core 2 found: USB 1.1 Host (cc 0x817, rev 0x03, vendor 0x4243)
>ssb: Core 3 found: PCI-E (cc 0x820, rev 0x01, vendor 0x4243)
>ssb: Sonics Silicon Backplane found on PCI device 0000:30:00.0
>piix4_smbus 0000:00:14.0: SMBus Host Controller at 0x8200, revision 0
>yenta_cardbus 0000:02:04.0: ISA IRQ mask 0x0cf8, PCI irq 20
>yenta_cardbus 0000:02:04.0: Socket status: 30000006
>pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #03 to #06
>yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge window: [io  0x1000-0x1fff]
>yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge window: [mem 0xd4000000-0xd42fffff]
>pcmcia_socket pcmcia_socket0: cs: memory probe 0xd4000000-0xd42fffff: excluding 0xd4000000-0xd402ffff
>yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge window: [mem 0x60000000-0x63ffffff pref]
>pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x63ffffff: excluding 0x60000000-0x63ffffff
>tifm_7xx1 0000:02:04.2: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>tg3.c:v3.117 (January 25, 2011)
>tg3 0000:02:01.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>tg3 0000:02:01.0: eth0: Tigon3 [partno(BCM95788A50) rev 3003] (PCI:33MHz:32-bit) MAC address 00:17:08:36:6b:d7
>tg3 0000:02:01.0: eth0: attached PHY is 5705 (10/100/1000Base-T Ethernet) (WireSpeed[0])
>tg3 0000:02:01.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
>tg3 0000:02:01.0: eth0: dma_rwctrl[763f0000] dma_mask[32-bit]
>input: HP WMI hotkeys as /devices/virtual/input/input5
>cfg80211: Calling CRDA to update world regulatory domain
>usb 3-1: new full speed USB device number 2 using ohci_hcd
>udevd[809]: renamed network interface eth0 to eth2
>usb 3-1: New USB device found, idVendor=08ff, idProduct=2580
>usb 3-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
>usb 3-1: Product: Fingerprint Sensor
>[drm] Initialized drm 1.1.0 20060810
>b43-phy0: Broadcom 4311 WLAN found (core revision 10)
>HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>hda-intel: chipset global capabilities = 0x4401
>b43-phy0 debug: Found PHY: Analog 4, Type 2, Revision 8
>b43-phy0 debug: Found Radio: Manuf 0x17F, Version 0x2050, Revision 2
>hda-intel: codec_mask = 0x3
>hda-intel: codec #0 probed OK
>hda-intel: codec #1 probed OK
>b43-phy0 debug: DebugFS (CONFIG_DEBUG_FS) not enabled in kernel config
>hda_codec: model 'hp' is selected for config 30b0:103c (HP nx6320)
>hda-codec: No codec parser is available
>ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
>Broadcom 43xx driver loaded [ Features: P, Firmware-ID: FW13 ]
>[drm] radeon defaulting to kernel modesetting.
>[drm] radeon kernel modesetting enabled.
>radeon 0000:01:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>[drm] initializing kernel modesetting (RS480 0x1002:0x5975).
>[drm] register mmio base: 0xD4300000
>[drm] register mmio size: 65536
>[drm] Generation 2 PCI interface, using max accessible memory
>radeon 0000:01:05.0: VRAM: 128M 0x0000000058000000 - 0x000000005FFFFFFF (128M used)
>radeon 0000:01:05.0: GTT: 512M 0x0000000060000000 - 0x000000007FFFFFFF
>[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
>[drm] Driver supports precise vblank timestamp query.
>[drm] radeon: irq initialized.
>[drm] Detected VRAM RAM=128M, BAR=128M
>[drm] RAM width 128bits DDR
>[TTM] Zone  kernel: Available graphics memory: 705708 kiB.
>[TTM] Initializing pool allocator.
>[drm] radeon: 128M of VRAM memory ready
>[drm] radeon: 512M of GTT memory ready.
>[drm] GART: num cpu pages 131072, num gpu pages 131072
>[drm] radeon: 2 quad pipes, 1 z pipes initialized.
>radeon 0000:01:05.0: WB enabled
>[drm] Loading R300 Microcode
>[drm] radeon: ring at 0x0000000060001000
>[drm] ring test succeeded in 1 usecs
>[drm] radeon: ib pool ready.
>[drm] ib test succeeded in 0 usecs
>[drm] Panel ID String: QDS                     
>[drm] Panel Size 1024x768
>[drm] radeon legacy LVDS backlight initialized
>[drm] Radeon Display Connectors
>[drm] Connector 0:
>[drm]   VGA
>[drm]   DDC: 0x68 0x68 0x68 0x68 0x68 0x68 0x68 0x68
>[drm]   Encoders:
>[drm]     CRT1: INTERNAL_DAC2
>[drm] Connector 1:
>[drm]   LVDS
>[drm]   DDC: 0x198 0x198 0x19c 0x19c 0x1a0 0x1a0 0x1a4 0x1a4
>[drm]   Encoders:
>[drm]     LCD1: INTERNAL_LVDS
>[drm] Connector 2:
>[drm]   S-video
>[drm]   Encoders:
>[drm]     TV1: INTERNAL_DAC2
>[drm] radeon: power management initialized
>[drm] fb mappable at 0xC0040000
>[drm] vram apper at 0xC0000000
>[drm] size 3145728
>[drm] fb depth is 24
>[drm]    pitch is 4096
>fbcon: radeondrmfb (fb0) is primary device
>Console: switching to colour frame buffer device 128x48
>fb0: radeondrmfb frame buffer device
>drm: registered panic notifier
>[drm] Initialized radeon 2.9.0 20080528 for 0000:01:05.0 on minor 0
>REISERFS (device sda3): found reiserfs format "3.6" with standard journal
>REISERFS (device sda3): using ordered data mode
>REISERFS (device sda3): journal params: device sda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>REISERFS (device sda3): checking transaction log (sda3)
>REISERFS (device sda3): Using r5 hash to sort names
>b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
>b43-phy0 debug: Chip initialized
>b43-phy0 debug: 32-bit DMA initialized
>b43-phy0 debug: QoS enabled
>b43-phy0 debug: Wireless interface started
>b43-phy0 debug: Adding Interface type 2
>Adding 1004024k swap on /dev/sda1.  Priority:-1 extents:1 across:1004024k 
>wlan0: authenticate with 00:11:f5:de:7b:27 (try 1)
>wlan0: authenticate with 00:11:f5:de:7b:27 (try 2)
>wlan0: authenticate with 00:11:f5:de:7b:27 (try 3)
>wlan0: authentication with 00:11:f5:de:7b:27 timed out
>ata1.00: configured for UDMA/100
>ata1: EH complete
>wlan0: direct probe to 00:11:f5:de:7b:27 (try 1/3)
>wlan0: direct probe to 00:11:f5:de:7b:27 (try 2/3)
>wlan0: direct probe to 00:11:f5:de:7b:27 (try 3/3)
>wlan0: direct probe to 00:11:f5:de:7b:27 timed out
>CE: hpet increased min_delta_ns to 20113 nsec
>hda-intel: azx_pcm_prepare: bufsize=0x10000, format=0x31
>hda_codec_setup_stream: NID=0x3, stream=0x5, channel=0, format=0x31
>hda_codec_cleanup_stream: NID=0x3
>hda-intel: azx_pcm_prepare: bufsize=0x10000, format=0x31
>hda_codec_setup_stream: NID=0x3, stream=0x5, channel=0, format=0x31
>hda_codec_cleanup_stream: NID=0x3
>wlan0: authenticate with 00:23:69:b5:ac:e1 (try 1)
>wlan0: authenticated
>wlan0: associate with 00:23:69:b5:ac:e1 (try 1)
>wlan0: RX AssocResp from 00:23:69:b5:ac:e1 (capab=0x431 status=0 aid=3)
>wlan0: associated
>b43-phy0 debug: Using hardware based encryption for keyidx: 0, mac: 00:23:69:b5:ac:e1
>b43-phy0 debug: Using hardware based encryption for keyidx: 1, mac: ff:ff:ff:ff:ff:ff
>CE: hpet increased min_delta_ns to 30169 nsec
>CE: hpet increased min_delta_ns to 45253 nsec
>CE: hpet increased min_delta_ns to 67879 nsec
>hrtimer: interrupt took 2984669 ns
>hda-intel: azx_pcm_prepare: bufsize=0x10000, format=0x31
>hda_codec_setup_stream: NID=0x3, stream=0x5, channel=0, format=0x31
>hda_codec_cleanup_stream: NID=0x3
>hda-intel: azx_pcm_prepare: bufsize=0x10000, format=0x31
>hda_codec_setup_stream: NID=0x3, stream=0x5, channel=0, format=0x31
>hda_codec_cleanup_stream: NID=0x3
>CE: hpet increased min_delta_ns to 101818 nsec

Actions: View

Attachments on bug 37220: 46734 | 46735 | 46736

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.