Attachment 52456 Details for Bug 41917 – dmesg.txt is the bug's dmesg information

dmesg.txt is the bug's dmesg information

dmesg.log (text/plain), 122.43 KB, created by Guang Yang on 2011-10-18 01:44:03 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Guang Yang

Created: 2011-10-18 01:44:03 UTC

Size: 122.43 KB

patch

obsolete

>E# supported from D0 D3hot D3cold
>pci 0000:00:1c.0: PME# disabled
>pci 0000:00:1c.6: [8086:1e1c] type 1 class 0x000604
>pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.6: PME# disabled
>pci 0000:00:1c.7: [8086:1e1e] type 1 class 0x000604
>pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.7: PME# disabled
>pci 0000:00:1d.0: [8086:1e26] type 0 class 0x000c03
>pci 0000:00:1d.0: reg 10: [mem 0xb0250000-0xb02503ff]
>pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1d.0: PME# disabled
>pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
>pci 0000:00:1f.0: [8086:1e47] type 0 class 0x000601
>pci 0000:00:1f.2: [8086:1e02] type 0 class 0x000106
>pci 0000:00:1f.2: reg 10: [io  0x20d0-0x20d7]
>pci 0000:00:1f.2: reg 14: [io  0x20c0-0x20c3]
>pci 0000:00:1f.2: reg 18: [io  0x20b0-0x20b7]
>pci 0000:00:1f.2: reg 1c: [io  0x20a0-0x20a3]
>pci 0000:00:1f.2: reg 20: [io  0x2060-0x207f]
>pci 0000:00:1f.2: reg 24: [mem 0xb0240000-0xb02407ff]
>pci 0000:00:1f.2: PME# supported from D3hot
>pci 0000:00:1f.2: PME# disabled
>pci 0000:00:1f.3: [8086:1e22] type 0 class 0x000c05
>pci 0000:00:1f.3: reg 10: [mem 0xb0230000-0xb02300ff 64bit]
>pci 0000:00:1f.3: reg 20: [io  0x2040-0x205f]
>pci 0000:00:1c.0: PCI bridge to [bus 01-01]
>pci 0000:02:00.0: [8086:0082] type 0 class 0x000280
>pci 0000:02:00.0: reg 10: [mem 0xb0100000-0xb0101fff 64bit]
>pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
>pci 0000:02:00.0: PME# disabled
>pci 0000:00:1c.6: PCI bridge to [bus 02-02]
>pci 0000:00:1c.6:   bridge window [mem 0xb0100000-0xb01fffff]
>pci 0000:03:00.0: [104c:8231] type 1 class 0x000604
>pci 0000:03:00.0: supports D1 D2
>pci 0000:00:1c.7: PCI bridge to [bus 03-04]
>pci 0000:00:1c.7:   bridge window [mem 0xb0000000-0xb00fffff]
>pci 0000:04:00.0: [104c:8235] type 0 class 0x000c00
>pci 0000:04:00.0: reg 10: [mem 0xb0010000-0xb00107ff]
>pci 0000:04:00.0: reg 14: [mem 0xb0000000-0xb0003fff]
>pci 0000:04:00.0: supports D1 D2
>pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot
>pci 0000:04:00.0: PME# disabled
>pci 0000:03:00.0: PCI bridge to [bus 04-04]
>pci 0000:03:00.0:   bridge window [mem 0xb0000000-0xb00fffff]
>pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [mem 0xafa00000-0xfeafffff] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP07._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP08._PRT]
>\_SB_.PCI0:_OSC invalid UUID
>_OSC request data:1 1f 1f 
> pci0000:00: Requesting ACPI _OSC control (0x1d)
>\_SB_.PCI0:_OSC invalid UUID
>_OSC request data:1 0 1d 
> pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d
>ACPI _OSC control for PCIe not granted, disabling ASPM
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
>vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
>vgaarb: loaded
>vgaarb: bridge control possible 0000:00:02.0
>SCSI subsystem initialized
>libata version 3.00 loaded.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: pci_cache_line_size set to 64 bytes
>reserve RAM buffer: 000000000009ac00 - 000000000009ffff 
>reserve RAM buffer: 00000000a9013000 - 00000000abffffff 
>reserve RAM buffer: 00000000aa7ea000 - 00000000abffffff 
>reserve RAM buffer: 00000000ab000000 - 00000000abffffff 
>reserve RAM buffer: 000000014e600000 - 000000014fffffff 
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
>hpet0: 8 comparators, 64-bit 14.318180 MHz counter
>Switching to clocksource hpet
>Switched to NOHz mode on CPU #0
>Switched to NOHz mode on CPU #1
>Switched to NOHz mode on CPU #2
>Switched to NOHz mode on CPU #5
>Switched to NOHz mode on CPU #6
>Switched to NOHz mode on CPU #3
>Switched to NOHz mode on CPU #7
>Switched to NOHz mode on CPU #4
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp 00:00: [bus 00-3e]
>pnp 00:00: [io  0x0000-0x0cf7 window]
>pnp 00:00: [io  0x0cf8-0x0cff]
>pnp 00:00: [io  0x0d00-0xffff window]
>pnp 00:00: [mem 0x000a0000-0x000bffff window]
>pnp 00:00: [mem 0x000c0000-0x000c3fff window]
>pnp 00:00: [mem 0x000c4000-0x000c7fff window]
>pnp 00:00: [mem 0x000c8000-0x000cbfff window]
>pnp 00:00: [mem 0x000cc000-0x000cffff window]
>pnp 00:00: [mem 0x000d0000-0x000d3fff window]
>pnp 00:00: [mem 0x000d4000-0x000d7fff window]
>pnp 00:00: [mem 0x000d8000-0x000dbfff window]
>pnp 00:00: [mem 0x000dc000-0x000dffff window]
>pnp 00:00: [mem 0x000e0000-0x000e3fff window]
>pnp 00:00: [mem 0x000e4000-0x000e7fff window]
>pnp 00:00: [mem 0x000e8000-0x000ebfff window]
>pnp 00:00: [mem 0x000ec000-0x000effff window]
>pnp 00:00: [mem 0x000f0000-0x000fffff window]
>pnp 00:00: [mem 0xafa00000-0xfeafffff window]
>pnp 00:00: [mem 0xfed40000-0xfed44fff window]
>pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
>pnp 00:01: [io  0x0000-0x001f]
>pnp 00:01: [io  0x0081-0x0091]
>pnp 00:01: [io  0x0093-0x009f]
>pnp 00:01: [io  0x00c0-0x00df]
>pnp 00:01: [dma 4]
>pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
>pnp 00:02: [mem 0xff000000-0xffffffff]
>pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
>pnp 00:03: [mem 0xfed00000-0xfed003ff]
>pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
>pnp 00:04: [io  0x00f0]
>pnp 00:04: [irq 13]
>pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
>pnp 00:05: [io  0x002e-0x002f]
>pnp 00:05: [io  0x004e-0x004f]
>pnp 00:05: [io  0x0061]
>pnp 00:05: [io  0x0063]
>pnp 00:05: [io  0x0065]
>pnp 00:05: [io  0x0067]
>pnp 00:05: [io  0x0070]
>pnp 00:05: [io  0x0080]
>pnp 00:05: [io  0x0092]
>pnp 00:05: [io  0x00b2-0x00b3]
>pnp 00:05: [io  0x0680-0x069f]
>pnp 00:05: [io  0x1000-0x100f]
>pnp 00:05: [io  0xffff]
>pnp 00:05: [io  0xffff]
>pnp 00:05: [io  0x0400-0x0453]
>pnp 00:05: [io  0x0458-0x047f]
>pnp 00:05: [io  0x0500-0x057f]
>pnp 00:05: [io  0x164e-0x164f]
>system 00:05: [io  0x0680-0x069f] has been reserved
>system 00:05: [io  0x1000-0x100f] has been reserved
>system 00:05: [io  0xffff] has been reserved
>system 00:05: [io  0xffff] has been reserved
>system 00:05: [io  0x0400-0x0453] has been reserved
>system 00:05: [io  0x0458-0x047f] has been reserved
>system 00:05: [io  0x0500-0x057f] has been reserved
>system 00:05: [io  0x164e-0x164f] has been reserved
>system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp 00:06: [io  0x0070-0x0077]
>pnp 00:06: [irq 8]
>pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
>pnp 00:07: [io  0x0454-0x0457]
>system 00:07: [io  0x0454-0x0457] has been reserved
>system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
>pnp 00:08: [mem 0xfed40000-0xfed44fff]
>pnp 00:08: Plug and Play ACPI device, IDs PNP0c31 (active)
>pnp 00:09: [mem 0xfed1c000-0xfed1ffff]
>pnp 00:09: [mem 0xfed10000-0xfed17fff]
>pnp 00:09: [mem 0xfed18000-0xfed18fff]
>pnp 00:09: [mem 0xfed19000-0xfed19fff]
>pnp 00:09: [mem 0xf8000000-0xfbffffff]
>pnp 00:09: [mem 0xfed20000-0xfed3ffff]
>pnp 00:09: [mem 0xfed90000-0xfed93fff]
>pnp 00:09: [mem 0xfed45000-0xfed8ffff]
>pnp 00:09: [mem 0xff000000-0xffffffff]
>pnp 00:09: [mem 0xfee00000-0xfeefffff]
>pnp 00:09: [mem 0xafa00000-0xafa00fff]
>pnp 00:09: [mem 0x00000000-0xffffffffffffffff disabled]
>system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
>system 00:09: [mem 0xfed10000-0xfed17fff] could not be reserved
>system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
>system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
>system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved
>system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
>system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved
>system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
>system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
>system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
>system 00:09: [mem 0xafa00000-0xafa00fff] has been reserved
>system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp 00:0a: [mem 0x00000000-0x0009cfff]
>system 00:0a: [mem 0x00000000-0x0009cfff] could not be reserved
>system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
>pnp: PnP ACPI: found 11 devices
>ACPI: ACPI bus type pnp unregistered
>PCI: max bus depth: 2 pci_try_num: 3
>pci 0000:00:1c.0: PCI bridge to [bus 01-01]
>pci 0000:00:1c.6: PCI bridge to [bus 02-02]
>pci 0000:00:1c.6:   bridge window [mem 0xb0100000-0xb01fffff]
>pci 0000:03:00.0: PCI bridge to [bus 04-04]
>pci 0000:03:00.0:   bridge window [mem 0xb0000000-0xb00fffff]
>pci 0000:00:1c.7: PCI bridge to [bus 03-04]
>pci 0000:00:1c.7:   bridge window [mem 0xb0000000-0xb00fffff]
>pci 0000:00:1e.0: PCI bridge to [bus 05-05]
>pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:1c.0: setting latency timer to 64
>pci 0000:00:1c.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>pci 0000:00:1c.6: setting latency timer to 64
>pci 0000:00:1c.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
>pci 0000:00:1c.7: setting latency timer to 64
>pci 0000:03:00.0: setting latency timer to 64
>pci 0000:00:1e.0: setting latency timer to 64
>pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
>pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
>pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
>pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
>pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
>pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
>pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
>pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
>pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
>pci_bus 0000:00: resource 13 [mem 0xafa00000-0xfeafffff]
>pci_bus 0000:00: resource 14 [mem 0xfed40000-0xfed44fff]
>pci_bus 0000:02: resource 1 [mem 0xb0100000-0xb01fffff]
>pci_bus 0000:03: resource 1 [mem 0xb0000000-0xb00fffff]
>pci_bus 0000:04: resource 1 [mem 0xb0000000-0xb00fffff]
>pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7]
>pci_bus 0000:05: resource 5 [io  0x0d00-0xffff]
>pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
>pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000d3fff]
>pci_bus 0000:05: resource 8 [mem 0x000d4000-0x000d7fff]
>pci_bus 0000:05: resource 9 [mem 0x000d8000-0x000dbfff]
>pci_bus 0000:05: resource 10 [mem 0x000dc000-0x000dffff]
>pci_bus 0000:05: resource 11 [mem 0x000e0000-0x000e3fff]
>pci_bus 0000:05: resource 12 [mem 0x000e4000-0x000e7fff]
>pci_bus 0000:05: resource 13 [mem 0xafa00000-0xfeafffff]
>pci_bus 0000:05: resource 14 [mem 0xfed40000-0xfed44fff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 524288 bind 65536)
>TCP reno registered
>UDP hash table entries: 2048 (order: 4, 65536 bytes)
>UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
>NET: Registered protocol family 1
>pci 0000:00:02.0: Boot video device
>pci 0000:03:00.0: TI XIO2000a quirk detected; secondary bus fast back-to-back transfers disabled
>PCI: CLS 64 bytes, default 64
>Trying to unpack rootfs image as initramfs...
>Freeing initrd memory: 12240k freed
>PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>Placing 64MB software IO TLB between ffff8800a5013000 - ffff8800a9013000
>software IO TLB at phys 0xa5013000 - 0xa9013000
>audit: initializing netlink socket (disabled)
>type=2000 audit(1318923915.858:1): initialized
>HugeTLB registered 2 MB page size, pre-allocated 0 pages
>VFS: Disk quotas dquot_6.5.2
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>Btrfs loaded
>msgmni has been set to 7685
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Fan [FAN0] (off)
>ACPI: Fan [FAN1] (off)
>ACPI: Fan [FAN2] (off)
>ACPI: Fan [FAN3] (off)
>ACPI: Fan [FAN4] (off)
>ACPI: acpi_idle registered with cpuidle
>Monitor-Mwait will be used to enter C-1 state
>Monitor-Mwait will be used to enter C-2 state
>Monitor-Mwait will be used to enter C-3 state
>thermal LNXTHERM:00: registered as thermal_zone0
>ACPI: Thermal Zone [TZ00] (28 C)
>thermal LNXTHERM:01: registered as thermal_zone1
>ACPI: Thermal Zone [TZ01] (30 C)
>Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>Non-volatile memory driver v1.3
>Linux agpgart interface v0.103
>agpgart-intel 0000:00:00.0: Intel Ivybridge Chipset
>agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
>agpgart-intel 0000:00:00.0: detected 65536K stolen memory
>agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
>brd: module loaded
>ahci 0000:00:1f.2: version 3.0
>ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
>ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode
>ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst 
>ahci 0000:00:1f.2: setting latency timer to 64
>scsi0 : ahci
>scsi1 : ahci
>scsi2 : ahci
>scsi3 : ahci
>scsi4 : ahci
>scsi5 : ahci
>ata1: SATA max UDMA/133 abar m2048@0xb0240000 port 0xb0240100 irq 40
>ata2: DUMMY
>ata3: SATA max UDMA/133 abar m2048@0xb0240000 port 0xb0240200 irq 40
>ata4: DUMMY
>ata5: DUMMY
>ata6: DUMMY
>i8042: PNP: No PS/2 controller found. Probing ports directly.
>i8042: No controller found
>mousedev: PS/2 mouse device common for all mice
>rtc_cmos 00:06: RTC can wake from S4
>rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
>cpuidle: using governor ladder
>cpuidle: using governor menu
>EFI Variables Facility v0.08 2004-May-17
>usbcore: registered new interface driver usbhid
>usbhid: USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 17
>Registering the dns_resolver key type
>PM: Hibernation image not present or could not be loaded.
>registered taskstats version 1
>  Magic number: 15:353:774
>mem zero: hash matches
>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>ata3.00: ATAPI: ATAPI   iHAS124   B, AL0Q, max UDMA/100
>ata1.00: ATA-8: WDC WD5000AAKX-603CA0, 16.01H16, max UDMA/100
>ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
>ata3.00: configured for UDMA/100
>ata1.00: configured for UDMA/100
>scsi 0:0:0:0: Direct-Access     ATA      WDC WD5000AAKX-6 16.0 PQ: 0 ANSI: 5
>scsi 2:0:0:0: CD-ROM            ATAPI    iHAS124   B      AL0Q PQ: 0 ANSI: 5
>Freeing unused kernel memory: 600k freed
>Write protecting the kernel read-only data: 6144k
>Freeing unused kernel memory: 344k freed
>Freeing unused kernel memory: 188k freed
>dracut: dracut-009-10.fc15
>dracut: rd.luks=0: removing cryptoluks activation
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.21.0-ioctl (2011-07-06) initialised: dm-devel@redhat.com
>udev[1020]: starting version 167
>input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
>ACPI: Power Button [PWRF]
>[drm] Initialized drm 1.1.0 20060810
>i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>i915 0000:00:02.0: setting latency timer to 64
>mtrr: no more MTRRs available
>[drm] MTRR allocation failed.  Graphics performance may suffer.
>[drm:intel_opregion_setup], graphic opregion physical addr: 0xaaff3018
>[drm:intel_opregion_setup], SWSCI supported
>i915 0000:00:02.0: irq 41 for MSI/MSI-X
>[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
>[drm] Driver supports precise vblank timestamp query.
>[drm:intel_detect_pch], Found PatherPoint PCH
>[drm:intel_parse_bios], Using VBT from OpRegion: $VBT SANDYBRIDGE-M  d
>[drm:parse_general_definitions], crt_ddc_bus_pin: 2
>[drm:parse_lfp_panel_data], Found panel mode in BIOS VBT tables:
>[drm:drm_mode_debug_printmodeline], Modeline 0:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
>[drm:parse_sdvo_panel_data], Found SDVO panel mode in BIOS VBT tables:
>[drm:drm_mode_debug_printmodeline], Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
>[drm:parse_sdvo_device_mapping], No SDVO device info is found in VBT
>[drm:intel_dsm_platform_mux_info] *ERROR* MUX INFO call failed
>[drm:intel_modeset_init], 3 display pipes available.
>vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
>[drm:intel_crt_init], pch crt adpa set to 0x80f40010
>[drm:intel_dp_i2c_init], i2c_init DPDDC-C
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_i2c_aux_ch], aux_ch failed -110
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_i2c_aux_ch], aux_ch failed -110
>[drm:intel_dp_i2c_init], i2c_init DPDDC-D
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_i2c_aux_ch], aux_ch failed -110
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_i2c_aux_ch], aux_ch failed -110
>[drm:ironlake_crtc_dpms], crtc 0/0 dpms off
>[drm:i915_get_vblank_timestamp], crtc 0 is disabled
>[drm:intel_update_fbc], 
>[drm:ironlake_crtc_dpms], crtc 1/1 dpms off
>[drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe B
>[drm:i915_get_vblank_timestamp], crtc 1 is disabled
>[drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe B
>[drm:intel_update_fbc], 
>[drm:ironlake_crtc_dpms], crtc 2/2 dpms off
>[drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe C
>[drm:i915_get_vblank_timestamp], crtc 2 is disabled
>[drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe C
>[drm:intel_update_fbc], 
>[drm:init_status_page], render ring hws offset: 0x00000000
>[drm:init_status_page], gen6 bsd ring hws offset: 0x00021000
>[drm:init_status_page], blt ring hws offset: 0x00042000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:6:VGA-1]
>[drm:intel_ironlake_crt_detect_hotplug], trigger hotplug detect cycle: adpa=0x3f40010
>[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0x3f40010, result 1
>[drm:intel_crt_detect], CRT detected via hotplug
>[drm:drm_edid_to_eld], ELD: no CEA Extension found
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:6:VGA-1] probed modes :
>[drm:drm_mode_debug_printmodeline], Modeline 19:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 26:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 21:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 20:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 27:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 28:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 29:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 22:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 23:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 24:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 25:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:HDMI-A-1]
>[drm:drm_detect_monitor_audio], Monitor has basic audio support
>[drm:drm_edid_to_eld], ELD monitor DELL 2408WFP
>HDMI: DVI dual 1, max TMDS clock 5, latency present 0 0, video latency 0 58, audio latency 2 128
>[drm:drm_edid_to_eld], ELD size 9, SAD count 1
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:HDMI-A-1] probed modes :
>[drm:drm_mode_debug_printmodeline], Modeline 31:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
>[drm:drm_mode_debug_printmodeline], Modeline 32:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 34:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 40:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 33:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 35:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 41:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 42:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 43:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 36:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 37:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 38:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 39:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:HDMI-A-2]
>Refined TSC clocksource calibration: 2195.013 MHz.
>Switching to clocksource tsc
>[drm:drm_detect_monitor_audio], Monitor has basic audio support
>[drm:drm_edid_to_eld], ELD monitor DELL 2709W
>HDMI: DVI dual 0, max TMDS clock 190, latency present 1 0, video latency 11 0, audio latency 0 2
>[drm:drm_edid_to_eld], ELD size 9, SAD count 1
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:HDMI-A-2] probed modes :
>[drm:drm_mode_debug_printmodeline], Modeline 45:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
>[drm:drm_mode_debug_printmodeline], Modeline 46:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 48:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 50:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6
>[drm:drm_mode_debug_printmodeline], Modeline 55:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 47:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 49:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 56:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 57:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 58:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 51:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 52:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 53:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 54:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_detect], DPCD: 0000000000000000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1] disconnected
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-2]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_detect], DPCD: 0000000000000000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-2] disconnected
>[drm:drm_setup_crtcs], 
>[drm:drm_enable_connectors], connector 6 enabled? yes
>[drm:drm_enable_connectors], connector 9 enabled? yes
>[drm:drm_enable_connectors], connector 13 enabled? yes
>[drm:drm_enable_connectors], connector 14 enabled? no
>[drm:drm_enable_connectors], connector 16 enabled? no
>[drm:drm_target_preferred], looking for cmdline mode on connector 6
>[drm:drm_target_preferred], looking for preferred mode on connector 6
>[drm:drm_target_preferred], found mode 1920x1080
>[drm:drm_target_preferred], looking for cmdline mode on connector 9
>[drm:drm_target_preferred], looking for preferred mode on connector 9
>[drm:drm_target_preferred], found mode 1920x1200
>[drm:drm_target_preferred], looking for cmdline mode on connector 13
>[drm:drm_target_preferred], looking for preferred mode on connector 13
>[drm:drm_target_preferred], found mode 1920x1200
>[drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config
>[drm:drm_setup_crtcs], desired mode 1920x1080 set on crtc 3
>[drm:drm_setup_crtcs], desired mode 1920x1200 set on crtc 4
>[drm:drm_setup_crtcs], desired mode 1920x1200 set on crtc 5
>[drm:intelfb_create], allocated 1920x1200 fb: 0x00063000, bo ffff880145ca6c00
>fbcon: inteldrmfb (fb0) is primary device
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:62] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], crtc has no fb, full mode set
>[drm:drm_crtc_helper_set_config], modes are different, full mode set
>[drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[drm:drm_mode_debug_printmodeline], Modeline 59:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
>[drm:drm_crtc_helper_set_config], encoder changed, full mode switch
>[drm:drm_crtc_helper_set_config], crtc changed, full mode switch
>[drm:drm_crtc_helper_set_config], [CONNECTOR:6:VGA-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], attempting to set mode from userspace
>[drm:drm_mode_debug_printmodeline], Modeline 59:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
>[drm:drm_crtc_helper_set_mode], [CRTC:3]
>[drm:intel_choose_pipe_bpp_dither], setting pipe bpc to 8 (max display bpc 8)
>[drm:ironlake_crtc_mode_set], Mode for pipe 0:
>[drm:drm_mode_debug_printmodeline], Modeline 59:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:ironlake_update_plane], Writing base 00063000 00000000 0 0 7680
>[drm:intel_update_fbc], 
>[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 8, cursor: 6
>[drm:ironlake_check_srwm], watermark 1: display plane 12, fbc lines 3, cursor 6
>[drm:ironlake_check_srwm], watermark 2: display plane 67, fbc lines 3, cursor 6
>[drm:ironlake_check_srwm], watermark 3: display plane 142, fbc lines 4, cursor 10
>[drm:drm_crtc_helper_set_mode], [ENCODER:7:DAC-7] set [MODE:59:1920x1080]
>[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 8, cursor: 6
>[drm:ironlake_check_srwm], watermark 1: display plane 12, fbc lines 3, cursor 6
>[drm:ironlake_check_srwm], watermark 2: display plane 67, fbc lines 3, cursor 6
>[drm:ironlake_check_srwm], watermark 3: display plane 142, fbc lines 4, cursor 10
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:ivb_manual_fdi_link_train], FDI_RX_IIR 0x700
>[drm:ivb_manual_fdi_link_train], FDI train 1 done.
>[drm:ivb_manual_fdi_link_train], FDI_RX_IIR 0x600
>[drm:ivb_manual_fdi_link_train], FDI train 2 done.
>[drm:ivb_manual_fdi_link_train], FDI train done.
>[drm:intel_update_fbc], 
>[drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
>[drm:drm_crtc_helper_set_config], 	[CONNECTOR:6:VGA-1] set DPMS on
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:4] [FB:62] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], crtc has no fb, full mode set
>[drm:drm_crtc_helper_set_config], modes are different, full mode set
>[drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[drm:drm_mode_debug_printmodeline], Modeline 60:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
>[drm:drm_crtc_helper_set_config], encoder changed, full mode switch
>[drm:drm_crtc_helper_set_config], [CONNECTOR:6:VGA-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], crtc changed, full mode switch
>[drm:drm_crtc_helper_set_config], [CONNECTOR:9:HDMI-A-1] to [CRTC:4]
>[drm:drm_crtc_helper_set_config], attempting to set mode from userspace
>[drm:drm_mode_debug_printmodeline], Modeline 60:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
>[drm:drm_crtc_helper_set_mode], [CRTC:4]
>[drm:intel_choose_pipe_bpp_dither], forcing bpc to 8 for HDMI
>[drm:intel_choose_pipe_bpp_dither], setting pipe bpc to 8 (max display bpc 8)
>[drm:ironlake_crtc_mode_set], Mode for pipe 1:
>[drm:drm_mode_debug_printmodeline], Modeline 60:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
>[drm:intel_prepare_page_flip], preparing flip with no unpin work?
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:ironlake_update_plane], Writing base 00063000 00000000 0 0 7680
>[drm:intel_update_fbc], 
>[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 8, cursor: 6
>[drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 8, cursor: 6
>[drm:drm_crtc_helper_set_mode], [ENCODER:8:TMDS-8] set [MODE:60:1920x1200]
>[drm:intel_hdmi_mode_set], Enabling HDMI audio on pipe B
>[drm:intel_write_eld], ELD on [CONNECTOR:9:HDMI-A-1], [ENCODER:8:TMDS-8]
>[drm:ironlake_write_eld], ELD on pipe B
>[drm:ironlake_write_eld], Audio directed to unknown port
>[drm:ironlake_write_eld], ELD size 9
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 8, cursor: 6
>[drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 8, cursor: 6
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:ivb_manual_fdi_link_train], FDI_RX_IIR 0x700
>[drm:ivb_manual_fdi_link_train], FDI train 1 done.
>[drm:ivb_manual_fdi_link_train], FDI_RX_IIR 0x600
>[drm:ivb_manual_fdi_link_train], FDI train 2 done.
>[drm:ivb_manual_fdi_link_train], FDI train done.
>[drm:intel_update_fbc], 
>[drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
>[drm:drm_crtc_helper_set_config], 	[CONNECTOR:9:HDMI-A-1] set DPMS on
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:5] [FB:62] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], crtc has no fb, full mode set
>[drm:drm_crtc_helper_set_config], modes are different, full mode set
>[drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[drm:drm_mode_debug_printmodeline], Modeline 61:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
>[drm:drm_crtc_helper_set_config], encoder changed, full mode switch
>[drm:drm_crtc_helper_set_config], [CONNECTOR:6:VGA-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:9:HDMI-A-1] to [CRTC:4]
>[drm:drm_crtc_helper_set_config], crtc changed, full mode switch
>[drm:drm_crtc_helper_set_config], [CONNECTOR:13:HDMI-A-2] to [CRTC:5]
>[drm:drm_crtc_helper_set_config], attempting to set mode from userspace
>[drm:drm_mode_debug_printmodeline], Modeline 61:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
>[drm:drm_crtc_helper_set_mode], [CRTC:5]
>[drm:intel_choose_pipe_bpp_dither], forcing bpc to 8 for HDMI
>[drm:intel_choose_pipe_bpp_dither], setting pipe bpc to 8 (max display bpc 8)
>[drm:ironlake_crtc_mode_set], Mode for pipe 2:
>[drm:drm_mode_debug_printmodeline], Modeline 61:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
>[drm:ironlake_crtc_mode_set], using pipe b dpll
>[drm:intel_prepare_page_flip], preparing flip with no unpin work?
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:ironlake_update_plane], Writing base 00063000 00000000 0 0 7680
>[drm:intel_update_fbc], 
>[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 8, cursor: 6
>[drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 8, cursor: 6
>[drm:sandybridge_update_wm], FIFO watermarks For pipe C - plane 8, cursor: 6
>[drm:drm_crtc_helper_set_mode], [ENCODER:12:TMDS-12] set [MODE:61:1920x1200]
>[drm:intel_hdmi_mode_set], Enabling HDMI audio on pipe C
>[drm:intel_write_eld], ELD on [CONNECTOR:13:HDMI-A-2], [ENCODER:12:TMDS-12]
>[drm:ironlake_write_eld], ELD on pipe C
>[drm:ironlake_write_eld], Audio directed to unknown port
>[drm:ironlake_write_eld], ELD size 9
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 8, cursor: 6
>[drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 8, cursor: 6
>[drm:sandybridge_update_wm], FIFO watermarks For pipe C - plane 8, cursor: 6
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:ivb_manual_fdi_link_train], FDI_RX_IIR 0x100
>[drm:ivb_manual_fdi_link_train], FDI train 1 done.
>[drm:ivb_manual_fdi_link_train], FDI_RX_IIR 0x200
>[drm:ivb_manual_fdi_link_train], FDI train 2 done.
>[drm:ivb_manual_fdi_link_train], FDI train done.
>[drm:intel_update_fbc], 
>[drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
>[drm:drm_crtc_helper_set_config], 	[CONNECTOR:13:HDMI-A-2] set DPMS on
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:62] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:6:VGA-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:9:HDMI-A-1] to [CRTC:4]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:13:HDMI-A-2] to [CRTC:5]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:4] [FB:62] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:6:VGA-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:9:HDMI-A-1] to [CRTC:4]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:13:HDMI-A-2] to [CRTC:5]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:5] [FB:62] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:6:VGA-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:9:HDMI-A-1] to [CRTC:4]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:13:HDMI-A-2] to [CRTC:5]
>Console: switching to colour frame buffer device 240x67
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:62] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:6:VGA-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:9:HDMI-A-1] to [CRTC:4]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:13:HDMI-A-2] to [CRTC:5]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:4] [FB:62] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:6:VGA-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:9:HDMI-A-1] to [CRTC:4]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:13:HDMI-A-2] to [CRTC:5]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:5] [FB:62] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:6:VGA-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:9:HDMI-A-1] to [CRTC:4]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:13:HDMI-A-2] to [CRTC:5]
>fb0: inteldrmfb frame buffer device
>drm: registered panic notifier
>acpi device:5a: registered as cooling_device13
>input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input1
>ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
>[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
>dracut: Starting plymouth daemon
>dracut: rd.dm=0: removing DM RAID activation
>dracut: rd.md=0: removing MD RAID activation
>[drm:pch_irq_handler], PCH HDCP audio interrupt
>[drm:i915_hotplug_work_func], running encoder hotplug functions
>[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0x83f40018, result 1
>[drm:intel_crt_detect], CRT detected via hotplug
>[drm:output_poll_execute], [CONNECTOR:6:VGA-1] status updated from 1 to 1
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>ehci_hcd 0000:00:1a.0: setting latency timer to 64
>ehci_hcd 0000:00:1a.0: EHCI Host Controller
>ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1a.0: debug port 2
>firewire_ohci 0000:04:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
>sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
>ehci_hcd 0000:00:1a.0: irq 16, io mem 0xb0270000
>ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 3.1.0rc6_3pipe_20111014_3pipe_20111014+ ehci_hcd
>usb usb1: SerialNumber: 0000:00:1a.0
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>ehci_hcd 0000:00:1d.0: setting latency timer to 64
>ehci_hcd 0000:00:1d.0: EHCI Host Controller
>ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:1d.0: debug port 2
>ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
>ehci_hcd 0000:00:1d.0: irq 23, io mem 0xb0250000
> sda: sda1 sda2
>sd 0:0:0:0: [sda] Attached SCSI disk
>ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: EHCI Host Controller
>usb usb2: Manufacturer: Linux 3.1.0rc6_3pipe_20111014_3pipe_20111014+ ehci_hcd
>usb usb2: SerialNumber: 0000:00:1d.0
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>cdrom: Uniform CD-ROM driver Revision: 3.20
>sr 2:0:0:0: Attached scsi CD-ROM sr0
>firewire_ohci: Added fw-ohci device 0000:04:00.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
>[drm:drm_detect_monitor_audio], Monitor has basic audio support
>[drm:output_poll_execute], [CONNECTOR:9:HDMI-A-1] status updated from 1 to 1
>[drm:pch_irq_handler], PCH HDCP audio interrupt
>[drm:drm_detect_monitor_audio], Monitor has basic audio support
>[drm:output_poll_execute], [CONNECTOR:13:HDMI-A-2] status updated from 1 to 1
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_detect], DPCD: 0000000000000000
>[drm:output_poll_execute], [CONNECTOR:14:DP-1] status updated from 2 to 2
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:pch_irq_handler], PCH HDCP audio interrupt
>[drm:intel_dp_detect], DPCD: 0000000000000000
>[drm:output_poll_execute], [CONNECTOR:16:DP-2] status updated from 2 to 2
>[drm:i915_hotplug_work_func], running encoder hotplug functions
>[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0x83f40018, result 1
>[drm:intel_crt_detect], CRT detected via hotplug
>[drm:output_poll_execute], [CONNECTOR:6:VGA-1] status updated from 1 to 1
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs (sda1): mounted filesystem with ordered data mode
>usb 1-1: new high speed USB device number 2 using ehci_hcd
>[drm:drm_detect_monitor_audio], Monitor has basic audio support
>[drm:output_poll_execute], [CONNECTOR:9:HDMI-A-1] status updated from 1 to 1
>[drm:pch_irq_handler], PCH HDCP audio interrupt
>usb 1-1: New USB device found, idVendor=8087, idProduct=0024
>usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>hub 1-1:1.0: USB hub found
>hub 1-1:1.0: 6 ports detected
>[drm:drm_detect_monitor_audio], Monitor has basic audio support
>[drm:output_poll_execute], [CONNECTOR:13:HDMI-A-2] status updated from 1 to 1
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_detect], DPCD: 0000000000000000
>[drm:output_poll_execute], [CONNECTOR:14:DP-1] status updated from 2 to 2
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>dracut: Checking filesystems
>dracut: fsck -T -t noopts=_netdev -A -a
>[drm:intel_dp_detect], DPCD: 0000000000000000
>[drm:output_poll_execute], [CONNECTOR:16:DP-2] status updated from 2 to 2
>[drm:i915_hotplug_work_func], running encoder hotplug functions
>[drm:i915_hotplug_work_func], running encoder hotplug functions
>[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0x83f40018, result 1
>[drm:intel_crt_detect], CRT detected via hotplug
>[drm:output_poll_execute], [CONNECTOR:6:VGA-1] status updated from 1 to 1
>[drm:pch_irq_handler], PCH HDCP audio interrupt
>usb 2-1: new high speed USB device number 2 using ehci_hcd
>firewire_core: created device fw0: GUID 354fc00035e71a01, S400
>[drm:drm_detect_monitor_audio], Monitor has basic audio support
>[drm:output_poll_execute], [CONNECTOR:9:HDMI-A-1] status updated from 1 to 1
>usb 2-1: New USB device found, idVendor=8087, idProduct=0024
>usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[drm:pch_irq_handler], PCH HDCP audio interrupt
>hub 2-1:1.0: USB hub found
>hub 2-1:1.0: 8 ports detected
>usb 1-1.6: new low speed USB device number 3 using ehci_hcd
>[drm:drm_detect_monitor_audio], Monitor has basic audio support
>[drm:output_poll_execute], [CONNECTOR:13:HDMI-A-2] status updated from 1 to 1
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_detect], DPCD: 0000000000000000
>[drm:output_poll_execute], [CONNECTOR:14:DP-1] status updated from 2 to 2
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_detect], DPCD: 0000000000000000
>[drm:output_poll_execute], [CONNECTOR:16:DP-2] status updated from 2 to 2
>[drm:i915_hotplug_work_func], running encoder hotplug functions
>[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0x83f40018, result 1
>[drm:intel_crt_detect], CRT detected via hotplug
>[drm:output_poll_execute], [CONNECTOR:6:VGA-1] status updated from 1 to 1
>usb 1-1.6: New USB device found, idVendor=413c, idProduct=2003
>usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 1-1.6: Product: Dell USB Keyboard
>usb 1-1.6: Manufacturer: Dell
>input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input2
>generic-usb 0003:413C:2003.0001: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1a.0-1.6/input0
>dracut: /dev/sda1: clean, 1120969/12804096 files, 17856216/51200000 blocks
>dracut: Remounting /dev/disk/by-uuid/c51f5655-e8ec-4bd8-9c44-24576fe757c1 with -o ro,
>[drm:drm_detect_monitor_audio], Monitor has basic audio support
>[drm:output_poll_execute], [CONNECTOR:9:HDMI-A-1] status updated from 1 to 1
>[drm:drm_detect_monitor_audio], Monitor has basic audio support
>[drm:output_poll_execute], [CONNECTOR:13:HDMI-A-2] status updated from 1 to 1
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_detect], DPCD: 0000000000000000
>[drm:output_poll_execute], [CONNECTOR:14:DP-1] status updated from 2 to 2
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_detect], DPCD: 0000000000000000
>[drm:output_poll_execute], [CONNECTOR:16:DP-2] status updated from 2 to 2
>[drm:i915_hotplug_work_func], running encoder hotplug functions
>[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0x83f40018, result 1
>[drm:intel_crt_detect], CRT detected via hotplug
>[drm:output_poll_execute], [CONNECTOR:6:VGA-1] status updated from 1 to 1
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs (sda1): mounted filesystem with ordered data mode
>usb 2-1.7: new low speed USB device number 3 using ehci_hcd
>dracut: Mounted root filesystem /dev/sda1
>[drm:drm_detect_monitor_audio], Monitor has basic audio support
>[drm:output_poll_execute], [CONNECTOR:9:HDMI-A-1] status updated from 1 to 1
>usb 2-1.7: New USB device found, idVendor=0461, idProduct=4d22
>usb 2-1.7: New USB device strings: Mfr=0, Product=2, SerialNumber=0
>usb 2-1.7: Product: USB Optical Mouse
>input: USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7:1.0/input/input3
>generic-usb 0003:0461:4D22.0002: input,hidraw1: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.0-1.7/input0
>[drm:drm_detect_monitor_audio], Monitor has basic audio support
>[drm:output_poll_execute], [CONNECTOR:13:HDMI-A-2] status updated from 1 to 1
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_detect], DPCD: 0000000000000000
>[drm:output_poll_execute], [CONNECTOR:14:DP-1] status updated from 2 to 2
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_detect], DPCD: 0000000000000000
>[drm:output_poll_execute], [CONNECTOR:16:DP-2] status updated from 2 to 2
>dracut: Switching root
>systemd[1]: systemd 26 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +SYSVINIT +LIBCRYPTSETUP; fedora)
>NET: Registered protocol family 10
>systemd[1]: Set hostname to <x-ivb4>.
>systemd-readahead-collect[1908]: Failed to create fanotify object: Function not implemented
>systemd[1]: systemd-readahead-collect.service: main process exited, code=exited, status=1
>EXT3-fs (sda1): using internal journal
>udev[1933]: starting version 167
>tpm_tis 00:08: 1.2 TPM (device-id 0xB, rev-id 16)
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>input: PC Speaker as /devices/platform/pcspkr/input/input4
>iTCO_vendor_support: vendor-support=0
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
>iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>microcode: CPU0 sig=0x306a4, pf=0x2, revision=0x5
>i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>microcode: CPU1 sig=0x306a4, pf=0x2, revision=0x5
>microcode: CPU2 sig=0x306a4, pf=0x2, revision=0x5
>microcode: CPU3 sig=0x306a4, pf=0x2, revision=0x5
>microcode: CPU4 sig=0x306a4, pf=0x2, revision=0x5
>microcode: CPU5 sig=0x306a4, pf=0x2, revision=0x5
>microcode: CPU6 sig=0x306a4, pf=0x2, revision=0x5
>microcode: CPU7 sig=0x306a4, pf=0x2, revision=0x5
>microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
>e1000e: Intel(R) PRO/1000 Network Driver - 1.4.4-k
>e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
>e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>e1000e 0000:00:19.0: setting latency timer to 64
>e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sr 2:0:0:0: Attached scsi generic sg1 type 5
>mtp-probe[2601]: checking bus 1, device 3: "/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6"
>mtp-probe[2600]: checking bus 2, device 3: "/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7"
>mtp-probe[2600]: bus: 2, device: 3 was not an MTP device
>mtp-probe[2601]: bus: 1, device: 3 was not an MTP device
>e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) 00:13:20:f9:de:7e
>e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
>e1000e 0000:00:19.0: eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
>snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
>snd_hda_intel 0000:00:1b.0: setting latency timer to 64
>Adding 2047996k swap on /dev/sda2.  Priority:0 extents:1 across:2047996k 
>hda_codec: ALC889: BIOS auto-probing.
>hda_codec: ALC889: SKU not ready 0x598301f0
>ALSA sound/pci/hda/hda_codec.c:4873 autoconfig: line_outs=3 (0x14/0x19/0x16/0x0/0x0) type:line
>ALSA sound/pci/hda/hda_codec.c:4877    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:4881    hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:4882    mono: mono_out=0x0
>ALSA sound/pci/hda/hda_codec.c:4885    dig-out=0x1e/0x0
>ALSA sound/pci/hda/hda_codec.c:4886    inputs:
>ALSA sound/pci/hda/hda_codec.c:4890  Front Mic=0x18
>ALSA sound/pci/hda/hda_codec.c:4890  Rear Mic=0x1b
>ALSA sound/pci/hda/hda_codec.c:4890  Line=0x1a
>ALSA sound/pci/hda/hda_codec.c:4892 
>ALSA sound/pci/hda/patch_realtek.c:1270 realtek: No valid SSID, checking pincfg 0x598301f0 for NID 0x1d
>ALSA sound/pci/hda/patch_realtek.c:1351 realtek: Enable default setup for auto mode as fallback
>HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
>HDMI status: Codec=3 Pin=6 Presence_Detect=1 ELD_Valid=1
>HDMI: detected monitor DELL 2408WFP at connection type HDMI
>HDMI: available speakers: FL/FR
>HDMI: supports coding type LPCM: channels = 2, rates = 44100 48000 88200, bits = 16 20 24
>HDMI status: Codec=3 Pin=7 Presence_Detect=1 ELD_Valid=1
>HDMI: detected monitor DELL 2709W at connection type HDMI
>HDMI: available speakers: FL/FR LFE RL/RR
>HDMI: supports coding type LPCM: channels = 6, rates = 44100 48000 88200, bits = 16 20 24
>HDMI hot plug event: Codec=3 Pin=6 Presence_Detect=1 ELD_Valid=1
>HDMI status: Codec=3 Pin=6 Presence_Detect=1 ELD_Valid=1
>HDMI: detected monitor DELL 2408WFP at connection type HDMI
>HDMI: available speakers: FL/FR
>HDMI: supports coding type LPCM: channels = 2, rates = 44100 48000 88200, bits = 16 20 24
>HDMI hot plug event: Codec=3 Pin=6 Presence_Detect=1 ELD_Valid=1
>HDMI status: Codec=3 Pin=6 Presence_Detect=1 ELD_Valid=1
>HDMI: detected monitor DELL 2408WFP at connection type HDMI
>HDMI: available speakers: FL/FR
>HDMI: supports coding type LPCM: channels = 2, rates = 44100 48000 88200, bits = 16 20 24
>HDMI hot plug event: Codec=3 Pin=7 Presence_Detect=1 ELD_Valid=1
>HDMI status: Codec=3 Pin=7 Presence_Detect=1 ELD_Valid=1
>HDMI: detected monitor DELL 2709W at connection type HDMI
>HDMI: available speakers: FL/FR LFE RL/RR
>HDMI: supports coding type LPCM: channels = 6, rates = 44100 48000 88200, bits = 16 20 24
>HDMI hot plug event: Codec=3 Pin=7 Presence_Detect=1 ELD_Valid=1
>HDMI status: Codec=3 Pin=7 Presence_Detect=1 ELD_Valid=1
>HDMI: detected monitor DELL 2709W at connection type HDMI
>HDMI: available speakers: FL/FR LFE RL/RR
>HDMI: supports coding type LPCM: channels = 6, rates = 44100 48000 88200, bits = 16 20 24
>/usr/sbin/gpm[2788]: *** info [daemon/startup.c(136)]:
>/usr/sbin/gpm[2788]: Started gpm successfully. Entered daemon mode.
>acpid[2801]: starting up with proc fs
>acpid[2801]: skipping incomplete file /etc/acpi/events/videoconf
>acpid[2801]: 1 rule loaded
>acpid[2801]: waiting for events: event logging is off
>mcelog[2813]: mcelog: Unsupported new Family 6 Model 3a CPU: only decoding architectural errors
>avahi-daemon[2783]: Found user 'avahi' (UID 70) and group 'avahi' (GID 70).
>avahi-daemon[2783]: Successfully dropped root privileges.
>avahi-daemon[2783]: avahi-daemon 0.6.30 starting up.
>/usr/sbin/crond[2804]: (CRON) INFO (running with inotify support)
>avahi-daemon[2783]: WARNING: No NSS support for mDNS detected, consider installing nss-mdns!
>smartd[2798]: smartd 5.40 2010-10-16 r3189 [x86_64-redhat-linux-gnu] (local build)
>smartd[2798]: Opened configuration file /etc/smartd.conf
>smartd[2798]: Configuration file /etc/smartd.conf was parsed, found DEVICESCAN, scanning devices
>smartd[2798]: Device: /dev/sda, type changed from 'scsi' to 'sat'
>smartd[2798]: Device: /dev/sda [SAT], opened
>smartd[2798]: Device: /dev/sda [SAT], not found in smartd database.
>smartd[2798]: Device: /dev/sda [SAT], is SMART capable. Adding to "monitor" list.
>smartd[2798]: Monitoring 1 ATA and 0 SCSI devices
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>ip_tables: (C) 2000-2006 Netfilter Core Team
>NetworkManager[2780]: <info> NetworkManager (version 0.8.999-2.git20110509.fc15) is starting...
>NetworkManager[2780]: <info> Read config file /etc/NetworkManager/NetworkManager.conf
>avahi-daemon[2783]: Successfully called chroot().
>avahi-daemon[2783]: Successfully dropped remaining capabilities.
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
>e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>auditd (2907): /proc/2907/oom_adj is deprecated, please use /proc/2907/oom_score_adj instead.
>RPC: Registered named UNIX socket transport module.
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>RPC: Registered tcp NFSv4.1 backchannel transport module.
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:62] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:6:VGA-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:9:HDMI-A-1] to [CRTC:4]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:13:HDMI-A-2] to [CRTC:5]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:4] [FB:62] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:6:VGA-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:9:HDMI-A-1] to [CRTC:4]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:13:HDMI-A-2] to [CRTC:5]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:5] [FB:62] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:6:VGA-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:9:HDMI-A-1] to [CRTC:4]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:13:HDMI-A-2] to [CRTC:5]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:62] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:6:VGA-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:9:HDMI-A-1] to [CRTC:4]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:13:HDMI-A-2] to [CRTC:5]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:4] [FB:62] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:6:VGA-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:9:HDMI-A-1] to [CRTC:4]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:13:HDMI-A-2] to [CRTC:5]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:5] [FB:62] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:6:VGA-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:9:HDMI-A-1] to [CRTC:4]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:13:HDMI-A-2] to [CRTC:5]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:62] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:6:VGA-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:9:HDMI-A-1] to [CRTC:4]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:13:HDMI-A-2] to [CRTC:5]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:4] [FB:62] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:6:VGA-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:9:HDMI-A-1] to [CRTC:4]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:13:HDMI-A-2] to [CRTC:5]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:5] [FB:62] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:6:VGA-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:9:HDMI-A-1] to [CRTC:4]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:13:HDMI-A-2] to [CRTC:5]
>e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
>e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>eth0: no IPv6 routers present
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:62] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:6:VGA-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:9:HDMI-A-1] to [CRTC:4]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:13:HDMI-A-2] to [CRTC:5]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:4] [FB:62] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:6:VGA-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:9:HDMI-A-1] to [CRTC:4]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:13:HDMI-A-2] to [CRTC:5]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:5] [FB:62] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:6:VGA-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:9:HDMI-A-1] to [CRTC:4]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:13:HDMI-A-2] to [CRTC:5]
>[drm:i915_driver_open], 
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:62] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:6:VGA-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:9:HDMI-A-1] to [CRTC:4]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:13:HDMI-A-2] to [CRTC:5]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:4] [FB:62] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:6:VGA-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:9:HDMI-A-1] to [CRTC:4]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:13:HDMI-A-2] to [CRTC:5]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:5] [FB:62] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:6:VGA-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:9:HDMI-A-1] to [CRTC:4]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:13:HDMI-A-2] to [CRTC:5]
>[drm:i915_driver_open], 
>[drm:drm_mode_getresources], CRTC[3] CONNECTORS[5] ENCODERS[5]
>[drm:drm_mode_getresources], CRTC[3] CONNECTORS[5] ENCODERS[5]
>[drm:drm_mode_getconnector], [CONNECTOR:6:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:6:VGA-1]
>[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0x83f40018, result 1
>[drm:intel_crt_detect], CRT detected via hotplug
>[drm:drm_edid_to_eld], ELD: no CEA Extension found
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:6:VGA-1] probed modes :
>[drm:drm_mode_debug_printmodeline], Modeline 19:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 26:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 21:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 20:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 27:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 28:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 29:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 22:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 23:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 24:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 25:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[drm:drm_mode_getconnector], [CONNECTOR:6:?]
>[drm:drm_mode_getconnector], [CONNECTOR:9:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:HDMI-A-1]
>[drm:drm_detect_monitor_audio], Monitor has basic audio support
>[drm:drm_edid_to_eld], ELD monitor DELL 2408WFP
>HDMI: DVI dual 1, max TMDS clock 5, latency present 0 0, video latency 0 58, audio latency 2 128
>[drm:drm_edid_to_eld], ELD size 9, SAD count 1
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:HDMI-A-1] probed modes :
>[drm:drm_mode_debug_printmodeline], Modeline 31:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
>[drm:drm_mode_debug_printmodeline], Modeline 32:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 34:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 40:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 33:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 35:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 41:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 42:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 43:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 36:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 37:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 38:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 39:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[drm:drm_mode_getconnector], [CONNECTOR:9:?]
>[drm:drm_mode_getconnector], [CONNECTOR:13:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:HDMI-A-2]
>[drm:drm_detect_monitor_audio], Monitor has basic audio support
>[drm:drm_edid_to_eld], ELD monitor DELL 2709W
>HDMI: DVI dual 0, max TMDS clock 190, latency present 1 0, video latency 11 0, audio latency 0 2
>[drm:drm_edid_to_eld], ELD size 9, SAD count 1
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:HDMI-A-2] probed modes :
>[drm:drm_mode_debug_printmodeline], Modeline 45:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
>[drm:drm_mode_debug_printmodeline], Modeline 46:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 48:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 50:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6
>[drm:drm_mode_debug_printmodeline], Modeline 55:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 47:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 49:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 56:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 57:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 58:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 51:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 52:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 53:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 54:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[drm:drm_mode_getconnector], [CONNECTOR:13:?]
>[drm:drm_mode_getconnector], [CONNECTOR:14:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_detect], DPCD: 0000000000000000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:14:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_detect], DPCD: 0000000000000000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:16:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-2]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_detect], DPCD: 0000000000000000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-2] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:16:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-2]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_detect], DPCD: 0000000000000000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-2] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:6:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:6:VGA-1]
>[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0x83f40018, result 1
>[drm:intel_crt_detect], CRT detected via hotplug
>[drm:drm_edid_to_eld], ELD: no CEA Extension found
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:6:VGA-1] probed modes :
>[drm:drm_mode_debug_printmodeline], Modeline 19:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 26:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 21:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 20:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 27:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 28:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 29:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 22:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 23:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 24:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 25:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[drm:drm_mode_getconnector], [CONNECTOR:6:?]
>[drm:drm_mode_getconnector], [CONNECTOR:9:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:HDMI-A-1]
>[drm:drm_detect_monitor_audio], Monitor has basic audio support
>[drm:drm_edid_to_eld], ELD monitor DELL 2408WFP
>HDMI: DVI dual 1, max TMDS clock 5, latency present 0 0, video latency 0 58, audio latency 2 128
>[drm:drm_edid_to_eld], ELD size 9, SAD count 1
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:HDMI-A-1] probed modes :
>[drm:drm_mode_debug_printmodeline], Modeline 31:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
>[drm:drm_mode_debug_printmodeline], Modeline 32:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 34:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 40:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 33:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 35:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 41:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 42:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 43:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 36:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 37:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 38:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 39:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[drm:drm_mode_getconnector], [CONNECTOR:9:?]
>[drm:drm_mode_getconnector], [CONNECTOR:13:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:HDMI-A-2]
>[drm:drm_detect_monitor_audio], Monitor has basic audio support
>[drm:drm_edid_to_eld], ELD monitor DELL 2709W
>HDMI: DVI dual 0, max TMDS clock 190, latency present 1 0, video latency 11 0, audio latency 0 2
>[drm:drm_edid_to_eld], ELD size 9, SAD count 1
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:HDMI-A-2] probed modes :
>[drm:drm_mode_debug_printmodeline], Modeline 45:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
>[drm:drm_mode_debug_printmodeline], Modeline 46:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 48:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 50:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6
>[drm:drm_mode_debug_printmodeline], Modeline 55:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 47:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 49:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 56:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 57:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 58:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 51:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 52:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 53:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 54:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[drm:drm_mode_getconnector], [CONNECTOR:13:?]
>[drm:drm_mode_getconnector], [CONNECTOR:14:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_detect], DPCD: 0000000000000000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:14:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_detect], DPCD: 0000000000000000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:16:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-2]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_detect], DPCD: 0000000000000000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-2] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:16:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-2]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_detect], DPCD: 0000000000000000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-2] disconnected
>[drm:drm_mode_addfb], [FB:63]
>[drm:drm_mode_setcrtc], [CRTC:3]
>[drm:drm_mode_setcrtc], [CONNECTOR:6:VGA-1]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:63] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:6:VGA-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:9:HDMI-A-1] to [CRTC:4]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:13:HDMI-A-2] to [CRTC:5]
>[drm:ironlake_update_plane], Writing base 0092D000 00000000 0 0 8192
>[drm:intel_update_fbc], 
>[drm:intel_prepare_page_flip], preparing flip with no unpin work?
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:drm_mode_setcrtc], [CRTC:4]
>[drm:drm_mode_setcrtc], [CONNECTOR:9:HDMI-A-1]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:4] [FB:63] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], modes are different, full mode set
>[drm:drm_mode_debug_printmodeline], Modeline 60:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
>[drm:drm_mode_debug_printmodeline], Modeline 65:"1920x1080" 0 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x0 0x5
>[drm:drm_crtc_helper_set_config], [CONNECTOR:6:VGA-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:9:HDMI-A-1] to [CRTC:4]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:13:HDMI-A-2] to [CRTC:5]
>[drm:drm_crtc_helper_set_config], attempting to set mode from userspace
>[drm:drm_mode_debug_printmodeline], Modeline 65:"1920x1080" 0 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x0 0x5
>[drm:drm_crtc_helper_set_mode], [CRTC:4]
>[drm:intel_prepare_page_flip], preparing flip with no unpin work?
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 8, cursor: 6
>[drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 8, cursor: 6
>[drm:sandybridge_update_wm], FIFO watermarks For pipe C - plane 8, cursor: 6
>[drm:intel_update_fbc], 
>[drm:intel_choose_pipe_bpp_dither], forcing bpc to 8 for HDMI
>[drm:intel_choose_pipe_bpp_dither], setting pipe bpc to 8 (max display bpc 8)
>[drm:ironlake_crtc_mode_set], Mode for pipe 1:
>[drm:drm_mode_debug_printmodeline], Modeline 65:"1920x1080" 0 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x0 0x5
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:ironlake_update_plane], Writing base 0092D000 00000000 0 0 8192
>[drm:intel_update_fbc], 
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 8, cursor: 6
>[drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 8, cursor: 6
>[drm:sandybridge_update_wm], FIFO watermarks For pipe C - plane 8, cursor: 6
>[drm:drm_crtc_helper_set_mode], [ENCODER:8:TMDS-8] set [MODE:65:1920x1080]
>[drm:intel_hdmi_mode_set], Enabling HDMI audio on pipe B
>[drm:intel_write_eld], ELD on [CONNECTOR:9:HDMI-A-1], [ENCODER:8:TMDS-8]
>[drm:ironlake_write_eld], ELD on pipe B
>[drm:ironlake_write_eld], Audio directed to unknown port
>[drm:ironlake_write_eld], ELD size 9
>HDMI hot plug event: Codec=3 Pin=6 Presence_Detect=1 ELD_Valid=0
>HDMI status: Codec=3 Pin=6 Presence_Detect=1 ELD_Valid=1
>ALSA sound/pci/hda/hda_eld.c:259 HDMI: Unknown ELD version 0
>HDMI hot plug event: Codec=3 Pin=7 Presence_Detect=1 ELD_Valid=1
>HDMI status: Codec=3 Pin=7 Presence_Detect=1 ELD_Valid=1
>HDMI: detected monitor DELL 2709W at connection type HDMI
>HDMI: available speakers: FL/FR LFE RL/RR
>HDMI: supports coding type LPCM: channels = 6, rates = 44100 48000 88200, bits = 16 20 24
>HDMI hot plug event: Codec=3 Pin=6 Presence_Detect=1 ELD_Valid=1
>HDMI status: Codec=3 Pin=6 Presence_Detect=1 ELD_Valid=1
>ALSA sound/pci/hda/hda_eld.c:259 HDMI: Unknown ELD version 0
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 8, cursor: 6
>[drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 8, cursor: 6
>[drm:sandybridge_update_wm], FIFO watermarks For pipe C - plane 8, cursor: 6
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:ivb_manual_fdi_link_train], FDI_RX_IIR 0x100
>[drm:ivb_manual_fdi_link_train], FDI train 1 done.
>[drm:ivb_manual_fdi_link_train], FDI_RX_IIR 0x600
>[drm:ivb_manual_fdi_link_train], FDI train 2 done.
>[drm:ivb_manual_fdi_link_train], FDI train done.
>[drm:intel_update_fbc], 
>[drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
>[drm:drm_crtc_helper_set_config], 	[CONNECTOR:9:HDMI-A-1] set DPMS on
>[drm:drm_mode_setcrtc], [CRTC:5]
>[drm:drm_mode_setcrtc], [CONNECTOR:13:HDMI-A-2]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:5] [FB:63] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], modes are different, full mode set
>[drm:drm_mode_debug_printmodeline], Modeline 61:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
>[drm:drm_mode_debug_printmodeline], Modeline 66:"1920x1080" 0 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x0 0x5
>[drm:drm_crtc_helper_set_config], [CONNECTOR:6:VGA-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:9:HDMI-A-1] to [CRTC:4]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:13:HDMI-A-2] to [CRTC:5]
>[drm:drm_crtc_helper_set_config], attempting to set mode from userspace
>[drm:drm_mode_debug_printmodeline], Modeline 66:"1920x1080" 0 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x0 0x5
>[drm:drm_crtc_helper_set_mode], [CRTC:5]
>[drm:intel_prepare_page_flip], preparing flip with no unpin work?
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 8, cursor: 6
>[drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 8, cursor: 6
>[drm:sandybridge_update_wm], FIFO watermarks For pipe C - plane 8, cursor: 6
>[drm:intel_update_fbc], 
>[drm:intel_choose_pipe_bpp_dither], forcing bpc to 8 for HDMI
>[drm:intel_choose_pipe_bpp_dither], setting pipe bpc to 8 (max display bpc 8)
>[drm:ironlake_crtc_mode_set], Mode for pipe 2:
>[drm:drm_mode_debug_printmodeline], Modeline 66:"1920x1080" 0 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x0 0x5
>[drm:ironlake_crtc_mode_set], using pipe b dpll
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:ironlake_update_plane], Writing base 0092D000 00000000 0 0 8192
>[drm:intel_update_fbc], 
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 8, cursor: 6
>[drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 8, cursor: 6
>[drm:sandybridge_update_wm], FIFO watermarks For pipe C - plane 8, cursor: 6
>[drm:drm_crtc_helper_set_mode], [ENCODER:12:TMDS-12] set [MODE:66:1920x1080]
>[drm:intel_hdmi_mode_set], Enabling HDMI audio on pipe C
>[drm:intel_write_eld], ELD on [CONNECTOR:13:HDMI-A-2], [ENCODER:12:TMDS-12]
>[drm:ironlake_write_eld], ELD on pipe C
>[drm:ironlake_write_eld], Audio directed to unknown port
>[drm:ironlake_write_eld], ELD size 9
>HDMI hot plug event: Codec=3 Pin=6 Presence_Detect=1 ELD_Valid=1
>HDMI status: Codec=3 Pin=6 Presence_Detect=1 ELD_Valid=1
>HDMI: detected monitor DELL 2408WFP at connection type HDMI
>HDMI: available speakers: FL/FR
>HDMI: supports coding type LPCM: channels = 2, rates = 44100 48000 88200, bits = 16 20 24
>HDMI hot plug event: Codec=3 Pin=7 Presence_Detect=1 ELD_Valid=1
>HDMI status: Codec=3 Pin=7 Presence_Detect=1 ELD_Valid=1
>ALSA sound/pci/hda/hda_eld.c:259 HDMI: Unknown ELD version 0
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 8, cursor: 6
>[drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 8, cursor: 6
>[drm:sandybridge_update_wm], FIFO watermarks For pipe C - plane 8, cursor: 6
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:ivb_manual_fdi_link_train], FDI_RX_IIR 0x100
>[drm:ivb_manual_fdi_link_train], FDI train 1 done.
>[drm:ivb_manual_fdi_link_train], FDI_RX_IIR 0x200
>[drm:ivb_manual_fdi_link_train], FDI train 2 done.
>[drm:ivb_manual_fdi_link_train], FDI train done.
>[drm:intel_update_fbc], 
>[drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
>[drm:drm_crtc_helper_set_config], 	[CONNECTOR:13:HDMI-A-2] set DPMS on
>[drm:drm_mode_addfb], [FB:67]
>[drm:drm_mode_setcrtc], [CRTC:3]
>[drm:drm_mode_setcrtc], [CONNECTOR:6:VGA-1]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:67] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:6:VGA-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:9:HDMI-A-1] to [CRTC:4]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:13:HDMI-A-2] to [CRTC:5]
>[drm:ironlake_update_plane], Writing base 0192D000 00000000 0 0 7680
>[drm:intel_update_fbc], 
>[drm:intel_prepare_page_flip], preparing flip with no unpin work?
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:drm_mode_setcrtc], [CRTC:4]
>[drm:drm_mode_setcrtc], [CONNECTOR:9:HDMI-A-1]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:4] [FB:67] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:6:VGA-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:9:HDMI-A-1] to [CRTC:4]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:13:HDMI-A-2] to [CRTC:5]
>[drm:ironlake_update_plane], Writing base 0192D000 00000000 0 0 7680
>[drm:intel_update_fbc], 
>[drm:intel_prepare_page_flip], preparing flip with no unpin work?
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:drm_mode_setcrtc], [CRTC:5]
>[drm:drm_mode_setcrtc], [CONNECTOR:13:HDMI-A-2]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:5] [FB:67] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:6:VGA-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:9:HDMI-A-1] to [CRTC:4]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:13:HDMI-A-2] to [CRTC:5]
>[drm:ironlake_update_plane], Writing base 0192D000 00000000 0 0 7680
>[drm:intel_update_fbc], 
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0x83f40018, result 1
>[drm:intel_crt_detect], CRT detected via hotplug
>[drm:output_poll_execute], [CONNECTOR:6:VGA-1] status updated from 1 to 1
>[drm:drm_detect_monitor_audio], Monitor has basic audio support
>[drm:output_poll_execute], [CONNECTOR:9:HDMI-A-1] status updated from 1 to 1
>[drm:drm_detect_monitor_audio], Monitor has basic audio support
>[drm:output_poll_execute], [CONNECTOR:13:HDMI-A-2] status updated from 1 to 1
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_detect], DPCD: 0000000000000000
>[drm:output_poll_execute], [CONNECTOR:14:DP-1] status updated from 2 to 2
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_detect], DPCD: 0000000000000000
>[drm:output_poll_execute], [CONNECTOR:16:DP-2] status updated from 2 to 2
>[drm:i915_driver_open], 
>fuse init (API version 7.17)
>[drm:drm_mode_getconnector], [CONNECTOR:6:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:6:VGA-1]
>[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0x83f40018, result 1
>[drm:intel_crt_detect], CRT detected via hotplug
>[drm:drm_edid_to_eld], ELD: no CEA Extension found
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:6:VGA-1] probed modes :
>[drm:drm_mode_debug_printmodeline], Modeline 19:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 26:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 21:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 20:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 27:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 28:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 29:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 22:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 23:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 24:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 25:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[drm:drm_mode_getconnector], [CONNECTOR:6:?]
>[drm:drm_mode_getconnector], [CONNECTOR:9:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:HDMI-A-1]
>[drm:drm_detect_monitor_audio], Monitor has basic audio support
>[drm:drm_edid_to_eld], ELD monitor DELL 2408WFP
>HDMI: DVI dual 1, max TMDS clock 5, latency present 0 0, video latency 0 58, audio latency 2 128
>[drm:drm_edid_to_eld], ELD size 9, SAD count 1
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:HDMI-A-1] probed modes :
>[drm:drm_mode_debug_printmodeline], Modeline 31:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
>[drm:drm_mode_debug_printmodeline], Modeline 32:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 34:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 40:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 33:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 35:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 41:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 42:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 43:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 36:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 37:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 38:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 39:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[drm:drm_mode_getconnector], [CONNECTOR:9:?]
>[drm:drm_mode_getconnector], [CONNECTOR:13:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:HDMI-A-2]
>[drm:drm_detect_monitor_audio], Monitor has basic audio support
>[drm:drm_edid_to_eld], ELD monitor DELL 2709W
>HDMI: DVI dual 0, max TMDS clock 190, latency present 1 0, video latency 11 0, audio latency 0 2
>[drm:drm_edid_to_eld], ELD size 9, SAD count 1
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:HDMI-A-2] probed modes :
>[drm:drm_mode_debug_printmodeline], Modeline 45:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
>[drm:drm_mode_debug_printmodeline], Modeline 46:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 48:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 50:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6
>[drm:drm_mode_debug_printmodeline], Modeline 55:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 47:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 49:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 56:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 57:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 58:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 51:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 52:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 53:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 54:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[drm:drm_mode_getconnector], [CONNECTOR:13:?]
>[drm:drm_mode_getconnector], [CONNECTOR:14:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>hda-intel: Invalid position buffer, using LPIB read method instead.
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>hda-intel: Invalid position buffer, using LPIB read method instead.
>[drm:intel_dp_detect], DPCD: 0000000000000000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:14:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_detect], DPCD: 0000000000000000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:16:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-2]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_detect], DPCD: 0000000000000000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-2] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:16:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-2]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_detect], DPCD: 0000000000000000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-2] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:6:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:6:VGA-1]
>[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0x83f40018, result 1
>[drm:intel_crt_detect], CRT detected via hotplug
>[drm:drm_edid_to_eld], ELD: no CEA Extension found
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:6:VGA-1] probed modes :
>[drm:drm_mode_debug_printmodeline], Modeline 19:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 26:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 21:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 20:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 27:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 28:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 29:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 22:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 23:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 24:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 25:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[drm:drm_mode_getconnector], [CONNECTOR:6:?]
>[drm:drm_mode_getconnector], [CONNECTOR:9:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:HDMI-A-1]
>hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
>[drm:drm_detect_monitor_audio], Monitor has basic audio support
>[drm:drm_edid_to_eld], ELD monitor DELL 2408WFP
>HDMI: DVI dual 1, max TMDS clock 5, latency present 0 0, video latency 0 58, audio latency 2 128
>[drm:drm_edid_to_eld], ELD size 9, SAD count 1
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:HDMI-A-1] probed modes :
>[drm:drm_mode_debug_printmodeline], Modeline 31:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
>[drm:drm_mode_debug_printmodeline], Modeline 32:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 34:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 40:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 33:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 35:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 41:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 42:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 43:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 36:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 37:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 38:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 39:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[drm:drm_mode_getconnector], [CONNECTOR:9:?]
>[drm:drm_mode_getconnector], [CONNECTOR:13:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:HDMI-A-2]
>[drm:drm_detect_monitor_audio], Monitor has basic audio support
>[drm:drm_edid_to_eld], ELD monitor DELL 2709W
>HDMI: DVI dual 0, max TMDS clock 190, latency present 1 0, video latency 11 0, audio latency 0 2
>[drm:drm_edid_to_eld], ELD size 9, SAD count 1
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:HDMI-A-2] probed modes :
>[drm:drm_mode_debug_printmodeline], Modeline 45:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
>[drm:drm_mode_debug_printmodeline], Modeline 46:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 48:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 50:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6
>[drm:drm_mode_debug_printmodeline], Modeline 55:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 47:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 49:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 56:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 57:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 58:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 51:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 52:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 53:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 54:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[drm:drm_mode_getconnector], [CONNECTOR:13:?]
>[drm:drm_mode_getconnector], [CONNECTOR:14:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_detect], DPCD: 0000000000000000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:14:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_detect], DPCD: 0000000000000000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:16:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-2]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_detect], DPCD: 0000000000000000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-2] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:16:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-2]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_detect], DPCD: 0000000000000000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-2] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:6:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:6:VGA-1]
>[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0x83f40018, result 1
>[drm:intel_crt_detect], CRT detected via hotplug
>[drm:drm_edid_to_eld], ELD: no CEA Extension found
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:6:VGA-1] probed modes :
>[drm:drm_mode_debug_printmodeline], Modeline 19:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 26:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 21:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 20:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 27:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 28:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 29:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 22:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 23:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 24:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 25:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[drm:drm_mode_getconnector], [CONNECTOR:6:?]
>[drm:drm_mode_getconnector], [CONNECTOR:9:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:HDMI-A-1]
>[drm:drm_detect_monitor_audio], Monitor has basic audio support
>[drm:drm_edid_to_eld], ELD monitor DELL 2408WFP
>HDMI: DVI dual 1, max TMDS clock 5, latency present 0 0, video latency 0 58, audio latency 2 128
>[drm:drm_edid_to_eld], ELD size 9, SAD count 1
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:HDMI-A-1] probed modes :
>[drm:drm_mode_debug_printmodeline], Modeline 31:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
>[drm:drm_mode_debug_printmodeline], Modeline 32:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 34:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 40:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 33:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 35:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 41:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 42:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 43:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 36:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 37:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 38:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 39:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[drm:drm_mode_getconnector], [CONNECTOR:9:?]
>[drm:drm_mode_getconnector], [CONNECTOR:13:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:HDMI-A-2]
>[drm:drm_detect_monitor_audio], Monitor has basic audio support
>[drm:drm_edid_to_eld], ELD monitor DELL 2709W
>HDMI: DVI dual 0, max TMDS clock 190, latency present 1 0, video latency 11 0, audio latency 0 2
>[drm:drm_edid_to_eld], ELD size 9, SAD count 1
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:HDMI-A-2] probed modes :
>[drm:drm_mode_debug_printmodeline], Modeline 45:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
>[drm:drm_mode_debug_printmodeline], Modeline 46:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 48:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 50:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6
>[drm:drm_mode_debug_printmodeline], Modeline 55:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 47:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 49:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 56:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 57:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 58:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 51:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 52:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 53:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 54:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[drm:drm_mode_getconnector], [CONNECTOR:13:?]
>[drm:drm_mode_getconnector], [CONNECTOR:14:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_detect], DPCD: 0000000000000000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:14:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_detect], DPCD: 0000000000000000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:16:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-2]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_detect], DPCD: 0000000000000000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-2] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:16:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-2]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_detect], DPCD: 0000000000000000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-2] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:6:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:6:VGA-1]
>[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0x83f40018, result 1
>[drm:intel_crt_detect], CRT detected via hotplug
>[drm:drm_edid_to_eld], ELD: no CEA Extension found
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:6:VGA-1] probed modes :
>[drm:drm_mode_debug_printmodeline], Modeline 19:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 26:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 21:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 20:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 27:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 28:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 29:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 22:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 23:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 24:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 25:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[drm:drm_mode_getconnector], [CONNECTOR:6:?]
>[drm:drm_mode_getconnector], [CONNECTOR:9:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:HDMI-A-1]
>[drm:drm_detect_monitor_audio], Monitor has basic audio support
>[drm:drm_edid_to_eld], ELD monitor DELL 2408WFP
>HDMI: DVI dual 1, max TMDS clock 5, latency present 0 0, video latency 0 58, audio latency 2 128
>[drm:drm_edid_to_eld], ELD size 9, SAD count 1
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:HDMI-A-1] probed modes :
>[drm:drm_mode_debug_printmodeline], Modeline 31:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
>[drm:drm_mode_debug_printmodeline], Modeline 32:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 34:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 40:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 33:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 35:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 41:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 42:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 43:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 36:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 37:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 38:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 39:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[drm:drm_mode_getconnector], [CONNECTOR:9:?]
>[drm:drm_mode_getconnector], [CONNECTOR:13:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:HDMI-A-2]
>[drm:drm_detect_monitor_audio], Monitor has basic audio support
>[drm:drm_edid_to_eld], ELD monitor DELL 2709W
>HDMI: DVI dual 0, max TMDS clock 190, latency present 1 0, video latency 11 0, audio latency 0 2
>[drm:drm_edid_to_eld], ELD size 9, SAD count 1
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:HDMI-A-2] probed modes :
>[drm:drm_mode_debug_printmodeline], Modeline 45:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
>[drm:drm_mode_debug_printmodeline], Modeline 46:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 48:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 50:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6
>[drm:drm_mode_debug_printmodeline], Modeline 55:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 47:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 49:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 56:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 57:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 58:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 51:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 52:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 53:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 54:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[drm:drm_mode_getconnector], [CONNECTOR:13:?]
>[drm:drm_mode_getconnector], [CONNECTOR:14:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_detect], DPCD: 0000000000000000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:14:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_detect], DPCD: 0000000000000000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:16:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-2]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_detect], DPCD: 0000000000000000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-2] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:16:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-2]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_detect], DPCD: 0000000000000000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-2] disconnected
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_detect], DPCD: 0000000000000000
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_detect], DPCD: 0000000000000000
>[drm:drm_detect_monitor_audio], Monitor has basic audio support
>[drm:drm_detect_monitor_audio], Monitor has basic audio support
>[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0x83f40018, result 1
>[drm:intel_crt_detect], CRT detected via hotplug
>[drm:i915_driver_open], 
>[drm:drm_mode_getconnector], [CONNECTOR:6:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:6:VGA-1]
>[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0x83f40018, result 1
>[drm:intel_crt_detect], CRT detected via hotplug
>[drm:drm_edid_to_eld], ELD: no CEA Extension found
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:6:VGA-1] probed modes :
>[drm:drm_mode_debug_printmodeline], Modeline 19:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 26:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 21:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 20:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 27:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 28:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 29:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 22:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 23:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 24:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 25:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[drm:drm_mode_getconnector], [CONNECTOR:6:?]
>[drm:drm_mode_getconnector], [CONNECTOR:9:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:HDMI-A-1]
>[drm:drm_detect_monitor_audio], Monitor has basic audio support
>[drm:drm_edid_to_eld], ELD monitor DELL 2408WFP
>HDMI: DVI dual 1, max TMDS clock 5, latency present 0 0, video latency 0 58, audio latency 2 128
>[drm:drm_edid_to_eld], ELD size 9, SAD count 1
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:HDMI-A-1] probed modes :
>[drm:drm_mode_debug_printmodeline], Modeline 31:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
>[drm:drm_mode_debug_printmodeline], Modeline 32:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 34:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 40:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 33:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 35:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 41:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 42:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 43:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 36:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 37:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 38:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 39:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[drm:drm_mode_getconnector], [CONNECTOR:9:?]
>[drm:drm_mode_getconnector], [CONNECTOR:13:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:HDMI-A-2]
>[drm:drm_detect_monitor_audio], Monitor has basic audio support
>[drm:drm_edid_to_eld], ELD monitor DELL 2709W
>HDMI: DVI dual 0, max TMDS clock 190, latency present 1 0, video latency 11 0, audio latency 0 2
>[drm:drm_edid_to_eld], ELD size 9, SAD count 1
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:HDMI-A-2] probed modes :
>[drm:drm_mode_debug_printmodeline], Modeline 45:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
>[drm:drm_mode_debug_printmodeline], Modeline 46:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 48:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 50:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6
>[drm:drm_mode_debug_printmodeline], Modeline 55:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 47:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 49:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 56:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 57:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 58:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 51:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 52:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 53:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 54:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[drm:drm_mode_getconnector], [CONNECTOR:13:?]
>[drm:drm_mode_getconnector], [CONNECTOR:14:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_detect], DPCD: 0000000000000000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:14:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_detect], DPCD: 0000000000000000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:16:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-2]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_detect], DPCD: 0000000000000000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-2] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:16:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-2]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_detect], DPCD: 0000000000000000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-2] disconnected
>[drm:intel_crtc_cursor_set], 
>[drm:intel_crtc_cursor_set], 
>[drm:intel_crtc_cursor_set], 
>[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0x83f40018, result 1
>[drm:intel_crt_detect], CRT detected via hotplug
>[drm:output_poll_execute], [CONNECTOR:6:VGA-1] status updated from 1 to 1
>[drm:drm_detect_monitor_audio], Monitor has basic audio support
>[drm:output_poll_execute], [CONNECTOR:9:HDMI-A-1] status updated from 1 to 1
>[drm:drm_detect_monitor_audio], Monitor has basic audio support
>[drm:output_poll_execute], [CONNECTOR:13:HDMI-A-2] status updated from 1 to 1
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_detect], DPCD: 0000000000000000
>[drm:output_poll_execute], [CONNECTOR:14:DP-1] status updated from 2 to 2
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_detect], DPCD: 0000000000000000
>[drm:output_poll_execute], [CONNECTOR:16:DP-2] status updated from 2 to 2
>[drm:drm_mode_addfb], [FB:63]
>[drm:intel_update_fbc], 
>[drm:intel_update_fbc],

Actions: View

Attachments on bug 41917: 52456 | 53657

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.