Attachment 54640 Details for Bug 44014 – dmesg output after the corruption occurs

dmesg output after the corruption occurs

dmesg.txt (text/plain), 32.81 KB, created by mrsteven on 2011-12-21 06:44:03 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: mrsteven

Created: 2011-12-21 06:44:03 UTC

Size: 32.81 KB

patch

obsolete

>Linux version 3.1.5-gentoo (root@mrsteven-mobil) (gcc version 4.5.3 (Gentoo 4.5.3-r1 p1.0, pie-0.4.5) ) #1 PREEMPT Sun Dec 18 22:15:50 CET 2011
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007ff40000 (usable)
> BIOS-e820: 000000007ff40000 - 000000007ff50000 (ACPI data)
> BIOS-e820: 000000007ff50000 - 0000000080000000 (ACPI NVS)
>Notice: NX (Execute Disable) protection missing in CPU!
>DMI 2.3 present.
>DMI: ASUSTeK Computer Inc.         M6N       /M6N, BIOS 0214 03/28/2005
>e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
>e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
>last_pfn = 0x7ff40 max_arch_pfn = 0x100000
>MTRR default type: uncachable
>MTRR fixed ranges enabled:
>  00000-9FFFF write-back
>  A0000-EFFFF uncachable
>  F0000-FFFFF write-protect
>MTRR variable ranges enabled:
>  0 base 000000000 mask F80000000 write-back
>  1 disabled
>  2 disabled
>  3 disabled
>  4 disabled
>  5 disabled
>  6 disabled
>  7 disabled
>PAT not supported by CPU.
>initial memory mapped : 0 - 01c00000
>Base memory trampoline at [c009c000] 9c000 size 12288
>init_memory_mapping: 0000000000000000-00000000377fe000
> 0000000000 - 0000400000 page 4k
> 0000400000 - 0037400000 page 2M
> 0037400000 - 00377fe000 page 4k
>kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000
>ACPI: RSDP 000f5df0 00014 (v00 ACPIAM)
>ACPI: RSDT 7ff40000 0002C (v01 A M I  OEMRSDT  03000528 MSFT 00000097)
>ACPI: FACP 7ff40200 00081 (v01 A M I  OEMFACP  03000528 MSFT 00000097)
>ACPI: DSDT 7ff40400 06500 (v01  1ABSP 1ABSP001 00000001 MSFT 02000001)
>ACPI: FACS 7ff50000 00040
>ACPI: OEMB 7ff50040 00053 (v01 A M I  OEMBIOS  03000528 MSFT 00000097)
>1159MB HIGHMEM available.
>887MB LOWMEM available.
>  mapped low ram: 0 - 377fe000
>  low ram: 0 - 377fe000
>Zone PFN ranges:
>  DMA      0x00000010 -> 0x00001000
>  Normal   0x00001000 -> 0x000377fe
>  HighMem  0x000377fe -> 0x0007ff40
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0: 0x00000010 -> 0x0000009f
>    0: 0x00000100 -> 0x0007ff40
>On node 0 totalpages: 523983
>free_area_init_node: node 0, pgdat c165a5e0, node_mem_map f67fd200
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 3951 pages, LIFO batch:0
>  Normal zone: 1744 pages used for memmap
>  Normal zone: 221486 pages, LIFO batch:31
>  HighMem zone: 2319 pages used for memmap
>  HighMem zone: 294451 pages, LIFO batch:31
>ACPI: PM-Timer IO Port: 0x408
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
>PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
>Allocating PCI resources starting at 80000000 (gap: 80000000:80000000)
>pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
>pcpu-alloc: [0] 0 
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 519888
>Kernel command line: root=/dev/sda5 ro clocksource=acpi_pm fbcon=scrollback:128K
>PID hash table entries: 4096 (order: 2, 16384 bytes)
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Initializing CPU#0
>Initializing HighMem for node 0 (000377fe:0007ff40)
>Memory: 2071592k/2096384k available (4862k kernel code, 24340k reserved, 1665k data, 316k init, 1187080k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xfffe4000 - 0xfffff000   ( 108 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
>    lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
>      .init : 0xc1660000 - 0xc16af000   ( 316 kB)
>      .data : 0xc14bfa01 - 0xc165ff80   (1665 kB)
>      .text : 0xc1000000 - 0xc14bfa01   (4862 kB)
>Checking if this processor honours the WP bit even in supervisor mode...Ok.
>SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
>NR_IRQS:16
>CPU 0 irqstacks, hard=f6006000 soft=f6008000
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Fast TSC calibration using PIT
>Detected 1399.952 MHz processor.
>Calibrating delay loop (skipped), value calculated using timer frequency.. 2799.90 BogoMIPS (lpj=1399952)
>pid_max: default: 32768 minimum: 301
>Mount-cache hash table entries: 512
>mce: CPU supports 5 MCE banks
>CPU: Intel(R) Pentium(R) M processor 1400MHz stepping 05
>ACPI: Core revision 20110623
>ACPI: setting ELCR to 0200 (from 0c30)
>Performance Events: p6 PMU driver.
>... version:                0
>... bit width:              32
>... generic registers:      2
>... value mask:             00000000ffffffff
>... max period:             000000007fffffff
>... fixed-purpose events:   0
>... event mask:             0000000000000003
>devtmpfs: initialized
>PM: Registering ACPI NVS region at 7ff50000 (720896 bytes)
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2
>PCI: Using configuration type 1 for base access
>bio: create slab <bio-0> at 0
>ACPI: Added _OSI(Module Device)
>ACPI: Added _OSI(Processor Device)
>ACPI: Added _OSI(3.0 _SCP Extensions)
>ACPI: Added _OSI(Processor Aggregator Device)
>ACPI: EC: Look up EC in DSDT
>ACPI: Executed 2 blocks of module-level executable AML code
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using PIC for interrupt routing
>ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
>PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
>ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
>pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
>pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)
>pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
>pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000d3fff] (ignored)
>pci_root PNP0A03:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
>pci_root PNP0A03:00: host bridge window [mem 0x000de000-0x000dffff] (ignored)
>pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xffffffff] (ignored)
>pci 0000:00:00.0: [8086:3340] type 0 class 0x000600
>pci 0000:00:00.0: reg 10: [mem 0xe0000000-0xefffffff pref]
>pci 0000:00:01.0: [8086:3341] type 1 class 0x000604
>pci 0000:00:1d.0: [8086:24c2] type 0 class 0x000c03
>pci 0000:00:1d.0: reg 20: [io  0xe800-0xe81f]
>pci 0000:00:1d.1: [8086:24c4] type 0 class 0x000c03
>pci 0000:00:1d.1: reg 20: [io  0xe880-0xe89f]
>pci 0000:00:1d.2: [8086:24c7] type 0 class 0x000c03
>pci 0000:00:1d.2: reg 20: [io  0xec00-0xec1f]
>pci 0000:00:1d.7: [8086:24cd] type 0 class 0x000c03
>pci 0000:00:1d.7: reg 10: [mem 0xffaffc00-0xffafffff]
>pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1d.7: PME# disabled
>pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
>pci 0000:00:1f.0: [8086:24cc] type 0 class 0x000601
>pci 0000:00:1f.0: Enabled i801 SMBus device
>pci 0000:00:1f.1: [8086:24ca] type 0 class 0x000101
>pci 0000:00:1f.1: reg 10: [io  0x0000-0x0007]
>pci 0000:00:1f.1: reg 14: [io  0x0000-0x0003]
>pci 0000:00:1f.1: reg 18: [io  0x0000-0x0007]
>pci 0000:00:1f.1: reg 1c: [io  0x0000-0x0003]
>pci 0000:00:1f.1: reg 20: [io  0xffa0-0xffaf]
>pci 0000:00:1f.1: reg 24: [mem 0x00000000-0x000003ff]
>pci 0000:00:1f.3: [8086:24c3] type 0 class 0x000c05
>pci 0000:00:1f.3: reg 20: [io  0x0540-0x055f]
>pci 0000:00:1f.5: [8086:24c5] type 0 class 0x000401
>pci 0000:00:1f.5: reg 10: [io  0xee00-0xeeff]
>pci 0000:00:1f.5: reg 14: [io  0xe000-0xe03f]
>pci 0000:00:1f.5: reg 18: [mem 0xffaff800-0xffaff9ff]
>pci 0000:00:1f.5: reg 1c: [mem 0xffaff400-0xffaff4ff]
>pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
>pci 0000:00:1f.5: PME# disabled
>pci 0000:00:1f.6: [8086:24c6] type 0 class 0x000703
>pci 0000:00:1f.6: reg 10: [io  0xe400-0xe4ff]
>pci 0000:00:1f.6: reg 14: [io  0xe080-0xe0ff]
>pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
>pci 0000:00:1f.6: PME# disabled
>pci 0000:01:00.0: [1002:4e50] type 0 class 0x000300
>pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xd7ffffff pref]
>pci 0000:01:00.0: reg 14: [io  0xd800-0xd8ff]
>pci 0000:01:00.0: reg 18: [mem 0xff8f0000-0xff8fffff]
>pci 0000:01:00.0: reg 30: [mem 0xff8c0000-0xff8dffff pref]
>pci 0000:01:00.0: supports D1 D2
>pci 0000:00:01.0: PCI bridge to [bus 01-01]
>pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
>pci 0000:00:01.0:   bridge window [mem 0xff800000-0xff8fffff]
>pci 0000:00:01.0:   bridge window [mem 0xce900000-0xde9fffff pref]
>pci 0000:02:00.0: [14e4:169c] type 0 class 0x000200
>pci 0000:02:00.0: reg 10: [mem 0xff9f0000-0xff9fffff]
>pci 0000:02:00.0: PME# supported from D3hot D3cold
>pci 0000:02:00.0: PME# disabled
>pci 0000:02:01.0: [1180:0476] type 2 class 0x000607
>pci 0000:02:01.0: reg 10: [mem 0x00000000-0x00000fff]
>pci 0000:02:01.0: supports D1 D2
>pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:02:01.0: PME# disabled
>pci 0000:02:01.1: [1180:0476] type 2 class 0x000607
>pci 0000:02:01.1: reg 10: [mem 0x00000000-0x00000fff]
>pci 0000:02:01.1: supports D1 D2
>pci 0000:02:01.1: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:02:01.1: PME# disabled
>pci 0000:02:01.2: [1180:0552] type 0 class 0x000c00
>pci 0000:02:01.2: reg 10: [mem 0xff9ef800-0xff9effff]
>pci 0000:02:01.2: PME# supported from D0 D3hot D3cold
>pci 0000:02:01.2: PME# disabled
>pci 0000:02:02.0: [8086:1043] type 0 class 0x000280
>pci 0000:02:02.0: reg 10: [mem 0xff9ee000-0xff9eefff]
>pci 0000:00:1e.0: PCI bridge to [bus 02-02] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [mem 0xff900000-0xff9fffff]
>pci 0000:00:1e.0:   bridge window [mem 0xdea00000-0xdeafffff pref]
>pci 0000:00:1e.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
>pci_bus 0000:03: [bus 03-06] partially hidden behind transparent bridge 0000:02 [bus 02-02]
>pci_bus 0000:07: [bus 07-0a] partially hidden behind transparent bridge 0000:02 [bus 02-02]
>pci_bus 0000:00: on NUMA node 0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
> pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 6 7 11 12)
>ACPI: PCI Interrupt Link [LNKC] (IRQs *10 12)
>ACPI: PCI Interrupt Link [LNKD] (IRQs *5 6 10)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 6 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 7) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 4 6 *10 12)
>vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
>vgaarb: loaded
>vgaarb: bridge control possible 0000:01:00.0
>SCSI subsystem initialized
>libata version 3.00 loaded.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>Advanced Linux Sound Architecture Driver Version 1.0.24.
>PCI: Using ACPI for IRQ routing
>PCI: pci_cache_line_size set to 64 bytes
>reserve RAM buffer: 000000000009fc00 - 000000000009ffff 
>reserve RAM buffer: 000000007ff40000 - 000000007fffffff 
>Switching to clocksource pit
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp 00:00: [bus 00-ff]
>pnp 00:00: [io  0x0cf8-0x0cff]
>pnp 00:00: [io  0x0000-0x0cf7 window]
>pnp 00:00: [io  0x0d00-0xffff window]
>pnp 00:00: [mem 0x000a0000-0x000bffff window]
>pnp 00:00: [mem 0x000d0000-0x000d3fff window]
>pnp 00:00: [mem 0x000d4000-0x000d7fff window]
>pnp 00:00: [mem 0x000de000-0x000dffff window]
>pnp 00:00: [mem 0x80000000-0xffffffff window]
>pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
>pnp 00:01: [dma 4]
>pnp 00:01: [io  0x0000-0x000f]
>pnp 00:01: [io  0x0081-0x0083]
>pnp 00:01: [io  0x0087]
>pnp 00:01: [io  0x0089-0x008b]
>pnp 00:01: [io  0x008f]
>pnp 00:01: [io  0x00c0-0x00df]
>pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
>pnp 00:02: [io  0x0070-0x0071]
>pnp 00:02: [irq 8]
>pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
>pnp 00:03: [io  0x0060]
>pnp 00:03: [io  0x0064]
>pnp 00:03: [irq 1]
>pnp 00:03: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
>pnp 00:04: [irq 12]
>pnp 00:04: Plug and Play ACPI device, IDs PNP0f12 PNP0f13 (active)
>pnp 00:05: [io  0x0061]
>pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
>pnp 00:06: [io  0x00f0-0x00ff]
>pnp 00:06: [irq 13]
>pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
>pnp 00:07: [irq 3]
>pnp 00:07: [dma 1]
>pnp 00:07: [io  0x02f8-0x02ff]
>pnp 00:07: Plug and Play ACPI device, IDs NSC6001 (active)
>pnp 00:08: [irq 7]
>pnp 00:08: [dma 3]
>pnp 00:08: [io  0x0378-0x037f]
>pnp 00:08: [io  0x0778-0x077f]
>pnp 00:08: Plug and Play ACPI device, IDs PNP0401 (active)
>pnp 00:09: [io  0x0000-0xffffffff disabled]
>pnp 00:09: [io  0x0480-0x048f]
>pnp 00:09: [io  0x05c0-0x05cf]
>system 00:09: [io  0x0480-0x048f] has been reserved
>system 00:09: [io  0x05c0-0x05cf] has been reserved
>system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp 00:0a: [io  0x0010-0x001f]
>pnp 00:0a: [io  0x0022-0x003f]
>pnp 00:0a: [io  0x0044-0x005f]
>pnp 00:0a: [io  0x0063]
>pnp 00:0a: [io  0x0065]
>pnp 00:0a: [io  0x0067-0x006f]
>pnp 00:0a: [io  0x0072-0x007f]
>pnp 00:0a: [io  0x0080]
>pnp 00:0a: [io  0x0084-0x0086]
>pnp 00:0a: [io  0x0088]
>pnp 00:0a: [io  0x008c-0x008e]
>pnp 00:0a: [io  0x0090-0x009f]
>pnp 00:0a: [io  0x00a2-0x00bf]
>pnp 00:0a: [io  0x00e0-0x00ef]
>pnp 00:0a: [io  0x04d0-0x04d1]
>system 00:0a: [io  0x04d0-0x04d1] has been reserved
>system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp 00:0b: [mem 0xffb00000-0xffbfffff]
>pnp 00:0b: [mem 0xfff00000-0xffffffff]
>pnp 00:0b: Plug and Play ACPI device, IDs INT0800 (active)
>pnp 00:0c: [mem 0xffc00000-0xffefffff]
>system 00:0c: [mem 0xffc00000-0xffefffff] has been reserved
>system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp 00:0d: [io  0x0540-0x055f]
>pnp 00:0d: [io  0x0400-0x047f]
>pnp 00:0d: [io  0x0000-0xffffffff disabled]
>pnp 00:0d: [io  0x0480-0x048f]
>pnp 00:0d: [io  0x0500-0x053f]
>pnp 00:0d: [io  0x04c0-0x04cf]
>pnp 00:0d: [mem 0xfec00000-0xfec00fff]
>pnp 00:0d: [mem 0xfee00000-0xfee00fff]
>system 00:0d: [io  0x0540-0x055f] has been reserved
>system 00:0d: [io  0x0400-0x047f] has been reserved
>system 00:0d: [io  0x0480-0x048f] has been reserved
>system 00:0d: [io  0x0500-0x053f] has been reserved
>system 00:0d: [io  0x04c0-0x04cf] has been reserved
>system 00:0d: [mem 0xfec00000-0xfec00fff] has been reserved
>system 00:0d: [mem 0xfee00000-0xfee00fff] has been reserved
>system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp 00:0e: [mem 0x00000000-0x0009ffff]
>pnp 00:0e: [mem 0x000c0000-0x000dffff]
>pnp 00:0e: [mem 0x000e0000-0x000fffff]
>pnp 00:0e: [mem 0x00100000-0x7fffffff]
>pnp 00:0e: [mem 0x00000000-0xffffffff disabled]
>system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved
>system 00:0e: [mem 0x000c0000-0x000dffff] could not be reserved
>system 00:0e: [mem 0x000e0000-0x000fffff] could not be reserved
>system 00:0e: [mem 0x00100000-0x7fffffff] could not be reserved
>system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
>pnp: PnP ACPI: found 15 devices
>ACPI: ACPI bus type pnp unregistered
>Switching to clocksource acpi_pm
>PCI: max bus depth: 2 pci_try_num: 3
>pci 0000:00:1f.1: BAR 5: assigned [mem 0x80000000-0x800003ff]
>pci 0000:00:1f.1: BAR 5: set to [mem 0x80000000-0x800003ff] (PCI address [0x80000000-0x800003ff])
>pci 0000:00:1e.0: BAR 7: assigned [io  0x1000-0x1fff]
>pci 0000:00:01.0: PCI bridge to [bus 01-01]
>pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
>Switched to NOHz mode on CPU #0
>pci 0000:00:01.0:   bridge window [mem 0xff800000-0xff8fffff]
>pci 0000:00:01.0:   bridge window [mem 0xce900000-0xde9fffff pref]
>pci 0000:02:01.0: BAR 0: assigned [mem 0x84000000-0x84000fff]
>pci 0000:02:01.0: BAR 0: set to [mem 0x84000000-0x84000fff] (PCI address [0x84000000-0x84000fff])
>pci 0000:02:01.1: BAR 0: assigned [mem 0x88000000-0x88000fff]
>pci 0000:02:01.1: BAR 0: set to [mem 0x88000000-0x88000fff] (PCI address [0x88000000-0x88000fff])
>pci 0000:02:01.1: BAR 10: assigned [mem 0x8c000000-0x8fffffff]
>pci 0000:02:01.1: BAR 9: assigned [mem 0x90000000-0x93ffffff pref]
>pci 0000:02:01.1: BAR 8: assigned [io  0x1000-0x10ff]
>pci 0000:02:01.1: BAR 7: assigned [io  0x1400-0x14ff]
>pci 0000:02:01.0: BAR 10: assigned [mem 0x94000000-0x97ffffff]
>pci 0000:02:01.0: BAR 9: assigned [mem 0x98000000-0x9bffffff pref]
>pci 0000:02:01.0: BAR 8: assigned [io  0x1800-0x18ff]
>pci 0000:02:01.0: BAR 7: assigned [io  0x1c00-0x1cff]
>pci 0000:02:01.0: CardBus bridge to [bus 03-06]
>pci 0000:02:01.0:   bridge window [io  0x1c00-0x1cff]
>pci 0000:02:01.0:   bridge window [io  0x1800-0x18ff]
>pci 0000:02:01.0:   bridge window [mem 0x98000000-0x9bffffff pref]
>pci 0000:02:01.0:   bridge window [mem 0x94000000-0x97ffffff]
>pci 0000:02:01.1: CardBus bridge to [bus 07-0a]
>pci 0000:02:01.1:   bridge window [io  0x1400-0x14ff]
>pci 0000:02:01.1:   bridge window [io  0x1000-0x10ff]
>pci 0000:02:01.1:   bridge window [mem 0x90000000-0x93ffffff pref]
>pci 0000:02:01.1:   bridge window [mem 0x8c000000-0x8fffffff]
>pci 0000:00:1e.0: PCI bridge to [bus 02-02]
>pci 0000:00:1e.0:   bridge window [io  0x1000-0x1fff]
>pci 0000:00:1e.0:   bridge window [mem 0xff900000-0xff9fffff]
>pci 0000:00:1e.0:   bridge window [mem 0xdea00000-0xdeafffff pref]
>pci 0000:00:1e.0: enabling device (0106 -> 0107)
>pci 0000:00:1e.0: setting latency timer to 64
>pci 0000:02:01.0: enabling device (0000 -> 0003)
>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 4
>PCI: setting IRQ 4 as level-triggered
>pci 0000:02:01.0: PCI INT A -> Link[LNKB] -> GSI 4 (level, low) -> IRQ 4
>pci 0000:02:01.0: setting latency timer to 64
>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
>PCI: setting IRQ 11 as level-triggered
>pci 0000:02:01.1: PCI INT B -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
>pci 0000:02:01.1: setting latency timer to 64
>pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
>pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
>pci_bus 0000:01: resource 0 [io  0xd000-0xdfff]
>pci_bus 0000:01: resource 1 [mem 0xff800000-0xff8fffff]
>pci_bus 0000:01: resource 2 [mem 0xce900000-0xde9fffff pref]
>pci_bus 0000:02: resource 0 [io  0x1000-0x1fff]
>pci_bus 0000:02: resource 1 [mem 0xff900000-0xff9fffff]
>pci_bus 0000:02: resource 2 [mem 0xdea00000-0xdeafffff pref]
>pci_bus 0000:02: resource 4 [io  0x0000-0xffff]
>pci_bus 0000:02: resource 5 [mem 0x00000000-0xffffffff]
>pci_bus 0000:03: resource 0 [io  0x1c00-0x1cff]
>pci_bus 0000:03: resource 1 [io  0x1800-0x18ff]
>pci_bus 0000:03: resource 2 [mem 0x98000000-0x9bffffff pref]
>pci_bus 0000:03: resource 3 [mem 0x94000000-0x97ffffff]
>pci_bus 0000:07: resource 0 [io  0x1400-0x14ff]
>pci_bus 0000:07: resource 1 [io  0x1000-0x10ff]
>pci_bus 0000:07: resource 2 [mem 0x90000000-0x93ffffff pref]
>pci_bus 0000:07: resource 3 [mem 0x8c000000-0x8fffffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>UDP hash table entries: 512 (order: 1, 8192 bytes)
>UDP-Lite hash table entries: 512 (order: 1, 8192 bytes)
>NET: Registered protocol family 1
>pci 0000:01:00.0: Boot video device
>PCI: CLS 64 bytes, default 64
>microcode: CPU0 sig=0x695, pf=0x20, revision=0x5
>microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
>audit: initializing netlink socket (disabled)
>type=2000 audit(1324476120.096:1): initialized
>highmem bounce pool size: 64 pages
>fuse init (API version 7.17)
>msgmni has been set to 1727
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler cfq registered (default)
>Linux agpgart interface v0.103
>agpgart-intel 0000:00:00.0: Intel 855PM Chipset
>agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
>ACPI: AC Adapter [AC] (on-line)
>input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
>ACPI: Lid Switch [LID]
>input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
>ACPI: Sleep Button [SLPB]
>input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
>ACPI: Power Button [PWRB]
>input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
>ACPI: Power Button [PWRF]
>ACPI: acpi_idle registered with cpuidle
>ACPI: Invalid PBLK length [7]
>Marking TSC unstable due to TSC halts in idle
>thermal LNXTHERM:00: registered as thermal_zone0
>ACPI: Thermal Zone [THRM] (36 C)
>[drm] Initialized drm 1.1.0 20060810
>ACPI: Battery Slot [BAT0] (battery absent)
>ACPI: Battery Slot [BAT1] (battery absent)
>[drm] radeon defaulting to kernel modesetting.
>[drm] radeon kernel modesetting enabled.
>radeon 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
>[drm] initializing kernel modesetting (RV350 0x1002:0x4E50 0x1043:0x1772).
>[drm] register mmio base: 0xFF8F0000
>[drm] register mmio size: 65536
>agpgart-intel 0000:00:00.0: AGP 2.0 bridge
>agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode
>radeon 0000:01:00.0: putting AGP V2 device into 4x mode
>radeon 0000:01:00.0: GTT: 256M 0xE0000000 - 0xEFFFFFFF
>[drm] Generation 2 PCI interface, using max accessible memory
>radeon 0000:01:00.0: VRAM: 128M 0x00000000D0000000 - 0x00000000D7FFFFFF (64M used)
>[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
>[drm] Driver supports precise vblank timestamp query.
>[drm] radeon: irq initialized.
>[drm] Detected VRAM RAM=128M, BAR=128M
>[drm] RAM width 128bits DDR
>[TTM] Zone  kernel: Available graphics memory: 442256 kiB.
>[TTM] Zone highmem: Available graphics memory: 1035796 kiB.
>[TTM] Initializing pool allocator.
>[drm] radeon: 64M of VRAM memory ready
>[drm] radeon: 256M of GTT memory ready.
>[drm] radeon: 1 quad pipes, 1 Z pipes initialized.
>radeon 0000:01:00.0: WB disabled
>[drm] Loading R300 Microcode
>[drm] radeon: ring at 0x00000000E0001000
>[drm] ring test succeeded in 1 usecs
>[drm] radeon: ib pool ready.
>[drm] ib test succeeded in 0 usecs
>[drm] Panel ID String: Samsung LTN154X1 WXGA   
>[drm] Panel Size 1280x800
>[drm] radeon legacy LVDS backlight initialized
>[drm] Radeon Display Connectors
>[drm] Connector 0:
>[drm]   VGA
>[drm]   DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
>[drm]   Encoders:
>[drm]     CRT1: INTERNAL_DAC1
>[drm] Connector 1:
>[drm]   LVDS
>[drm]   Encoders:
>[drm]     LCD1: INTERNAL_LVDS
>[drm] Connector 2:
>[drm]   S-video
>[drm]   Encoders:
>[drm]     TV1: INTERNAL_DAC2
>[drm] Radeon display connector VGA-1: No monitor connected or invalid EDID
>[drm] fb mappable at 0xD0040000
>[drm] vram apper at 0xD0000000
>[drm] size 4096000
>[drm] fb depth is 24
>[drm]    pitch is 5120
>fbcon: radeondrmfb (fb0) is primary device
>Console: switching to colour frame buffer device 160x50
>fb0: radeondrmfb frame buffer device
>drm: registered panic notifier
>[drm] Initialized radeon 2.11.0 20080528 for 0000:01:00.0 on minor 0
>parport_pc 00:08: reported by Plug and Play ACPI
>parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
>ata_piix 0000:00:1f.1: version 2.13
>ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
>PCI: setting IRQ 10 as level-triggered
>ata_piix 0000:00:1f.1: PCI INT A -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10
>ata_piix 0000:00:1f.1: setting latency timer to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
>ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
>tg3.c:v3.119 (May 18, 2011)
>tg3 0000:02:00.0: PCI INT A -> Link[LNKB] -> GSI 4 (level, low) -> IRQ 4
>tg3 0000:02:00.0: eth0: Tigon3 [partno(BCM95788A50) rev 3003] (PCI:33MHz:32-bit) MAC address 00:0e:a6:3f:aa:4e
>tg3 0000:02:00.0: eth0: attached PHY is 5705 (10/100/1000Base-T Ethernet) (WireSpeed[0], EEE[0])
>tg3 0000:02:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
>tg3 0000:02:00.0: eth0: dma_rwctrl[763f0000] dma_mask[32-bit]
>tun: Universal TUN/TAP device driver, 1.6
>tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
>firewire_ohci 0000:02:01.2: PCI INT C -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10
>firewire_ohci: Added fw-ohci device 0000:02:01.2, OHCI v1.0, 4 IR + 4 IT contexts, quirks 0x1
>yenta_cardbus 0000:02:01.0: CardBus bridge found [1043:1864]
>ata2.01: ATAPI: TSSTcorp CDDVDW SN-S082H, SB01, max UDMA/33
>ata2.01: configured for UDMA/33
>ata1.00: ATA-7: WDC WD1600BEVE-00UYT0, 01.04A01, max UDMA/100
>ata1.00: 312581808 sectors, multi 16: LBA48 
>ata1.00: configured for UDMA/100
>scsi 0:0:0:0: Direct-Access     ATA      WDC WD1600BEVE-0 01.0 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>scsi 1:0:1:0: CD-ROM            TSSTcorp CDDVDW SN-S082H  SB01 PQ: 0 ANSI: 5
>sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
>cdrom: Uniform CD-ROM driver Revision: 3.20
>sr 1:0:1:0: Attached scsi CD-ROM sr0
>sr 1:0:1:0: Attached scsi generic sg1 type 5
> sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>yenta_cardbus 0000:02:01.0: ISA IRQ mask 0x0028, PCI irq 4
>yenta_cardbus 0000:02:01.0: Socket status: 30000006
>pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #02 to #06
>yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge window: [io  0x1000-0x1fff]
>yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge window: [mem 0xff900000-0xff9fffff]
>pcmcia_socket pcmcia_socket0: cs: memory probe 0xff900000-0xff9fffff: excluding 0xff9e0000-0xff9fffff
>yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge window: [mem 0xdea00000-0xdeafffff pref]
>pcmcia_socket pcmcia_socket0: cs: memory probe 0xdea00000-0xdeafffff: excluding 0xdea00000-0xdeafffff
>yenta_cardbus 0000:02:01.1: CardBus bridge found [1043:1864]
>firewire_core: created device fw0: GUID 00e018000315820b, S400
>yenta_cardbus 0000:02:01.1: ISA IRQ mask 0x0028, PCI irq 11
>yenta_cardbus 0000:02:01.1: Socket status: 30000006
>pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #06 to #0a
>yenta_cardbus 0000:02:01.1: pcmcia: parent PCI bridge window: [io  0x1000-0x1fff]
>yenta_cardbus 0000:02:01.1: pcmcia: parent PCI bridge window: [mem 0xff900000-0xff9fffff]
>pcmcia_socket pcmcia_socket1: cs: memory probe 0xff900000-0xff9fffff: excluding 0xff9e0000-0xff9fffff
>yenta_cardbus 0000:02:01.1: pcmcia: parent PCI bridge window: [mem 0xdea00000-0xdeafffff pref]
>pcmcia_socket pcmcia_socket1: cs: memory probe 0xdea00000-0xdeafffff: excluding 0xdea00000-0xdeafffff
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10
>ehci_hcd 0000:00:1d.7: PCI INT D -> Link[LNKH] -> GSI 10 (level, low) -> IRQ 10
>ehci_hcd 0000:00:1d.7: setting latency timer to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1d.7: debug port 1
>ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
>ehci_hcd 0000:00:1d.7: irq 10, io mem 0xffaffc00
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 3.1.5-gentoo ehci_hcd
>usb usb1: SerialNumber: 0000:00:1d.7
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 6 ports detected
>uhci_hcd: USB Universal Host Controller Interface driver
>uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
>uhci_hcd 0000:00:1d.0: setting latency timer to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.0: irq 11, io base 0x0000e800
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: UHCI Host Controller
>usb usb2: Manufacturer: Linux 3.1.5-gentoo uhci_hcd
>usb usb2: SerialNumber: 0000:00:1d.0
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5
>PCI: setting IRQ 5 as level-triggered
>uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 5 (level, low) -> IRQ 5
>uhci_hcd 0000:00:1d.1: setting latency timer to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.1: irq 5, io base 0x0000e880
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 3.1.5-gentoo uhci_hcd
>usb usb3: SerialNumber: 0000:00:1d.1
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10
>uhci_hcd 0000:00:1d.2: setting latency timer to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.2: irq 10, io base 0x0000ec00
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 3.1.5-gentoo uhci_hcd
>usb usb4: SerialNumber: 0000:00:1d.2
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f12:PS2M] at 0x60,0x64 irq 1,12
>i8042: Detected active multiplexing controller, rev 1.1
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX0 port at 0x60,0x64 irq 12
>serio: i8042 AUX1 port at 0x60,0x64 irq 12
>serio: i8042 AUX2 port at 0x60,0x64 irq 12
>serio: i8042 AUX3 port at 0x60,0x64 irq 12
>mousedev: PS/2 mouse device common for all mice
>rtc_cmos 00:02: RTC can wake from S4
>rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, 114 bytes nvram
>i801_smbus 0000:00:1f.3: PCI INT B -> Link[LNKB] -> GSI 4 (level, low) -> IRQ 4
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver usbhid
>usbhid: USB HID core driver
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
>asus_laptop: Asus Laptop Support version 0.42
>asus_laptop: Error calling CWAP(1)
>asus_laptop:   M6N model detected
>asus_laptop: Error setting bluetooth status to 1
>input: Asus Laptop extra buttons as /devices/platform/asus_laptop/input/input5
>Registered led device: asus::mail
>ALSA device list:
>  No soundcards found.
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>IPv4 over IPv4 tunneling driver
>ip_tables: (C) 2000-2006 Netfilter Core Team
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 10
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>IPv6 over IPv4 tunneling driver
>NET: Registered protocol family 17
>NET: Registered protocol family 15
>lib80211: common routines for IEEE802.11 drivers
>lib80211_crypt: registered algorithm 'NULL'
>rtc_cmos 00:02: setting system clock to 2011-12-21 14:02:02 UTC (1324476122)
>Synaptics Touchpad, model: 1, fw: 4.6, id: 0x925ea1, caps: 0x80471b/0x0/0x0
>input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input6
>EXT3-fs (sda5): mounted filesystem with ordered data mode
>kjournald starting.  Commit interval 5 seconds
>VFS: Mounted root (ext3 filesystem) readonly on device 8:5.
>devtmpfs: mounted
>Freeing unused kernel memory: 316k freed
>udev[859]: starting version 164
>usb 2-1: new low speed USB device number 2 using uhci_hcd
>snd_intel8x0 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 4 (level, low) -> IRQ 4
>snd_intel8x0 0000:00:1f.5: setting latency timer to 64
>usb 2-1: New USB device found, idVendor=046d, idProduct=c016
>usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 2-1: Product: Optical USB Mouse
>usb 2-1: Manufacturer: Logitech
>input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input7
>generic-usb 0003:046D:C016.0001: input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.0-1/input0
>cfg80211: Calling CRDA to update world regulatory domain
>libipw: 802.11 data/management/control stack, git-1.1.13
>libipw: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
>ipw2100: Intel(R) PRO/Wireless 2100 Network Driver, git-1.2.2
>ipw2100: Copyright(c) 2003-2006 Intel Corporation
>ipw2100 0000:02:02.0: PCI INT A -> Link[LNKB] -> GSI 4 (level, low) -> IRQ 4
>ipw2100: Detected Intel PRO/Wireless 2100 Network Connection
>intel8x0_measure_ac97_clock: measured 50931 usecs (2455 samples)
>intel8x0: clocking to 48000
>cfg80211: failed to add phy80211 symlink to netdev!
>udev[868]: renamed network interface eth1 to ath0
>cfg80211: World regulatory domain updated:
>cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>EXT3-fs (sda5): using internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs (sda6): using internal journal
>EXT3-fs (sda6): mounted filesystem with journal data mode
>Adding 2000056k swap on /dev/sda8.  Priority:-1 extents:1 across:2000056k 
>ADDRCONF(NETDEV_UP): ath0: link is not ready
>ADDRCONF(NETDEV_CHANGE): ath0: link becomes ready
>lib80211_crypt: registered algorithm 'CCMP'
>ath0: no IPv6 routers present

Actions: View

Attachments on bug 44014: 54638 | 54639 | 54640 | 54675

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.