Attachment 56848 Details for Bug 45867 – The dmesg when all the 3 display work.

The dmesg when all the 3 display work.

dmesg.correct (text/plain), 122.11 KB, created by Yi Sun on 2012-02-09 23:38:15 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Yi Sun

Created: 2012-02-09 23:38:15 UTC

Size: 122.11 KB

patch

obsolete

>v01 A M I   PCHHPET 06222004 AMI. 00000003)
>ACPI: SSDT 00000000aafe5018 010A8 (v01 TrmRef PtidDevc 00001000 INTL 20110623)
>ACPI: SSDT 00000000aafe4918 00411 (v01    AMI PerfTune 00001000 INTL 20110623)
>ACPI: MCFG 00000000aafe8e98 0003C (v01 INTEL  SNDYBRDG 06222004 MSFT 00000097)
>ACPI: SSDT 00000000aafd2818 0079A (v01  PmRef  Cpu0Ist 00003000 INTL 20110623)
>ACPI: SSDT 00000000aafd1018 00A92 (v01  PmRef    CpuPm 00003000 INTL 20110623)
>ACPI: FPDT 00000000aaff4018 00064 (v01  INTEL  IVB-CPT 00010000 INTL 20111107)
>ACPI: Local APIC address 0xfee00000
>No NUMA configuration found
>Faking a node at 0000000000000000-000000014e600000
>Initmem setup node 0 0000000000000000-000000014e600000
>  NODE_DATA [000000014e5fb000 - 000000014e5fffff]
> [ffffea0000000000-ffffea00053fffff] PMD -> [ffff880149c00000-ffff88014dbfffff] on node 0
>Zone PFN ranges:
>  DMA      0x00000010 -> 0x00001000
>  DMA32    0x00001000 -> 0x00100000
>  Normal   0x00100000 -> 0x0014e600
>Movable zone start PFN for each node
>Early memory PFN ranges
>    0: 0x00000010 -> 0x0000009a
>    0: 0x00000100 -> 0x00020000
>    0: 0x00020200 -> 0x00040004
>    0: 0x00040005 -> 0x000a8c0f
>    0: 0x000a8c52 -> 0x000aa5c4
>    0: 0x000aafff -> 0x000ab000
>    0: 0x00100000 -> 0x0014e600
>On node 0 totalpages: 1018123
>  DMA zone: 64 pages used for memmap
>  DMA zone: 5 pages reserved
>  DMA zone: 3909 pages, LIFO batch:0
>  DMA32 zone: 16320 pages used for memmap
>  DMA32 zone: 676801 pages, LIFO batch:31
>  Normal zone: 5016 pages used for memmap
>  Normal zone: 316008 pages, LIFO batch:31
>ACPI: PM-Timer IO Port: 0x408
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
>ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
>ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
>ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled)
>ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
>ACPI: LAPIC (acpi_id[0x09] lapic_id[0x08] disabled)
>ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x09] disabled)
>ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0a] disabled)
>ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0b] disabled)
>ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0c] disabled)
>ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0d] disabled)
>ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0e] disabled)
>ACPI: LAPIC (acpi_id[0x10] lapic_id[0x0f] disabled)
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Using ACPI (MADT) for SMP configuration information
>ACPI: HPET id: 0x8086a701 base: 0xfed00000
>SMP: Allowing 16 CPUs, 8 hotplug CPUs
>nr_irqs_gsi: 40
>PM: Registered nosave memory: 000000000009a000 - 000000000009b000
>PM: Registered nosave memory: 000000000009b000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
>PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
>PM: Registered nosave memory: 0000000020000000 - 0000000020200000
>PM: Registered nosave memory: 0000000040004000 - 0000000040005000
>PM: Registered nosave memory: 00000000a8c0f000 - 00000000a8c52000
>PM: Registered nosave memory: 00000000aa5c4000 - 00000000aad6a000
>PM: Registered nosave memory: 00000000aad6a000 - 00000000aafea000
>PM: Registered nosave memory: 00000000aafea000 - 00000000aafff000
>PM: Registered nosave memory: 00000000ab000000 - 00000000afa00000
>PM: Registered nosave memory: 00000000afa00000 - 00000000f8000000
>PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
>PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
>PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
>PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000
>PM: Registered nosave memory: 00000000fed10000 - 00000000fed14000
>PM: Registered nosave memory: 00000000fed14000 - 00000000fed18000
>PM: Registered nosave memory: 00000000fed18000 - 00000000fed1a000
>PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
>PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
>PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
>PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
>PM: Registered nosave memory: 00000000fee01000 - 00000000ff900000
>PM: Registered nosave memory: 00000000ff900000 - 00000000ffc00000
>PM: Registered nosave memory: 00000000ffc00000 - 00000000ffd00000
>PM: Registered nosave memory: 00000000ffd00000 - 0000000100000000
>Allocating PCI resources starting at afa00000 (gap: afa00000:48600000)
>setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:16 nr_node_ids:1
>PERCPU: Embedded 26 pages/cpu @ffff88014e200000 s75520 r8192 d22784 u131072
>pcpu-alloc: s75520 r8192 d22784 u131072 alloc=1*2097152
>pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 
>Built 1 zonelists in Node order, mobility grouping on.  Total pages: 996718
>Policy zone: Normal
>Kernel command line: ro root=UUID=c51f5655-e8ec-4bd8-9c44-24576fe757c1 rd_NO_LUKS rd_NO_LVM rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYTABLE=us rhgb quiet biosdevname=0 drm.debug=0xe
>PID hash table entries: 4096 (order: 3, 32768 bytes)
>xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
>Checking aperture...
>No AGP bridge found
>Calgary: detecting Calgary via BIOS EBDA area
>Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>Memory: 3918868k/5478400k available (3908k kernel code, 1405908k absent, 153624k reserved, 2669k data, 536k init)
>SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
>Hierarchical RCU implementation.
>NR_IRQS:4352 nr_irqs:808 16
>Extended CMOS year: 2000
>Console: colour VGA+ 80x25
>console [tty0] enabled
>hpet clockevent registered
>Fast TSC calibration using PIT
>Detected 2194.998 MHz processor.
>Calibrating delay loop (skipped), value calculated using timer frequency.. 4389.99 BogoMIPS (lpj=2194998)
>pid_max: default: 32768 minimum: 301
>Security Framework initialized
>Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
>Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Mount-cache hash table entries: 256
>Initializing cgroup subsys cpuacct
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
>ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
>mce: CPU supports 9 MCE banks
>CPU0: Thermal monitoring enabled (TM1)
>using mwait in idle threads.
>ACPI: Core revision 20120111
>Switched APIC routing to physical flat.
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>CPU0: Genuine Intel(R) CPU  @ 2.20GHz stepping 04
>Performance Events: PEBS fmt1+, generic architected perfmon, Intel PMU driver.
>... version:                3
>... bit width:              48
>... generic registers:      4
>... value mask:             0000ffffffffffff
>... max period:             000000007fffffff
>... fixed-purpose events:   3
>... event mask:             000000070000000f
>Booting Node   0, Processors  #1
>smpboot cpu 1: start_ip = 95000
> #2
>smpboot cpu 2: start_ip = 95000
> #3
>smpboot cpu 3: start_ip = 95000
> #4
>smpboot cpu 4: start_ip = 95000
> #5
>smpboot cpu 5: start_ip = 95000
> #6
>smpboot cpu 6: start_ip = 95000
> #7
>smpboot cpu 7: start_ip = 95000
>Brought up 8 CPUs
>Total of 8 processors activated (35119.96 BogoMIPS).
>PM: Registering ACPI NVS region at aad6a000 (2621440 bytes)
>RTC time: 14:51:12, date: 02/10/12
>NET: Registered protocol family 16
>ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
>ACPI: bus type pci registered
>PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
>PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
>PCI: Using configuration type 1 for base access
>bio: create slab <bio-0> at 0
>ACPI: Added _OSI(Module Device)
>ACPI: Added _OSI(Processor Device)
>ACPI: Added _OSI(3.0 _SCP Extensions)
>ACPI: Added _OSI(Processor Aggregator Device)
>ACPI: EC: Look up EC in DSDT
>ACPI: Executed 1 blocks of module-level executable AML code
>ACPI Warning: Incorrect checksum in table [FPDT] - 0x11, should be 0x37 (20120111/tbutils-321)
>ACPI: SSDT 00000000aaccd018 00A4F (v01  PmRef  Cpu0Cst 00003001 INTL 20110623)
>ACPI: Dynamic OEM Table Load:
>ACPI: SSDT           (null) 00A4F (v01  PmRef  Cpu0Cst 00003001 INTL 20110623)
>ACPI: SSDT 00000000aaccea98 00303 (v01  PmRef    ApIst 00003000 INTL 20110623)
>ACPI: Dynamic OEM Table Load:
>ACPI: SSDT           (null) 00303 (v01  PmRef    ApIst 00003000 INTL 20110623)
>ACPI: SSDT 00000000aacccd98 00119 (v01  PmRef    ApCst 00003000 INTL 20110623)
>ACPI: Dynamic OEM Table Load:
>ACPI: SSDT           (null) 00119 (v01  PmRef    ApCst 00003000 INTL 20110623)
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: Power Resource [FN00] (off)
>ACPI: Power Resource [FN01] (off)
>ACPI: Power Resource [FN02] (off)
>ACPI: Power Resource [FN03] (off)
>ACPI: Power Resource [FN04] (off)
>ACPI: ACPI Dock Station Driver: 1 docks/bays found
>PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>\_SB_.PCI0:_OSC invalid UUID
>_OSC request data:1 8 1f 
>ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
>pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
>pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
>pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
>pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
>pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
>pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
>pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
>pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
>pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
>pci_root PNP0A08:00: host bridge window [mem 0xafa00000-0xfeafffff]
>pci_root PNP0A08:00: host bridge window [mem 0x14e600000-0x54e5fffff]
>pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff]
>PCI host bridge to bus 0000:00
>pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
>pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
>pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
>pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
>pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
>pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
>pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
>pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
>pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
>pci_bus 0000:00: root bus resource [mem 0xafa00000-0xfeafffff]
>pci_bus 0000:00: root bus resource [mem 0x14e600000-0x54e5fffff]
>pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
>pci 0000:00:00.0: [8086:0150] type 0 class 0x000600
>pci 0000:00:02.0: [8086:0162] type 0 class 0x000300
>pci 0000:00:02.0: reg 10: [mem 0xafc00000-0xafffffff 64bit]
>pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff 64bit pref]
>pci 0000:00:02.0: reg 20: [io  0x3000-0x303f]
>pci 0000:00:14.0: [8086:1e31] type 0 class 0x000c03
>pci 0000:00:14.0: reg 10: [mem 0xb0cb0000-0xb0cbffff 64bit]
>pci 0000:00:14.0: PME# supported from D3hot D3cold
>pci 0000:00:16.0: [8086:1e3a] type 0 class 0x000780
>pci 0000:00:16.0: reg 10: [mem 0xb0ca0000-0xb0ca000f 64bit]
>pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:16.3: [8086:1e3d] type 0 class 0x000700
>pci 0000:00:16.3: reg 10: [io  0x30e0-0x30e7]
>pci 0000:00:16.3: reg 14: [mem 0xb0c90000-0xb0c90fff]
>pci 0000:00:19.0: [8086:1502] type 0 class 0x000200
>pci 0000:00:19.0: reg 10: [mem 0xb0c00000-0xb0c1ffff]
>pci 0000:00:19.0: reg 14: [mem 0xb0c80000-0xb0c80fff]
>pci 0000:00:19.0: reg 18: [io  0x3080-0x309f]
>pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1a.0: [8086:1e2d] type 0 class 0x000c03
>pci 0000:00:1a.0: reg 10: [mem 0xb0c70000-0xb0c703ff]
>pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1b.0: [8086:1e20] type 0 class 0x000403
>pci 0000:00:1b.0: reg 10: [mem 0xb0c60000-0xb0c63fff 64bit]
>pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.0: [8086:1e10] type 1 class 0x000604
>pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.6: [8086:1e1c] type 1 class 0x000604
>pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.7: [8086:1e1e] type 1 class 0x000604
>pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1d.0: [8086:1e26] type 0 class 0x000c03
>pci 0000:00:1d.0: reg 10: [mem 0xb0c50000-0xb0c503ff]
>pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
>pci 0000:00:1f.0: [8086:1e47] type 0 class 0x000601
>pci 0000:00:1f.2: [8086:1e02] type 0 class 0x000106
>pci 0000:00:1f.2: reg 10: [io  0x30d0-0x30d7]
>pci 0000:00:1f.2: reg 14: [io  0x30c0-0x30c3]
>pci 0000:00:1f.2: reg 18: [io  0x30b0-0x30b7]
>pci 0000:00:1f.2: reg 1c: [io  0x30a0-0x30a3]
>pci 0000:00:1f.2: reg 20: [io  0x3060-0x307f]
>pci 0000:00:1f.2: reg 24: [mem 0xb0c40000-0xb0c407ff]
>pci 0000:00:1f.2: PME# supported from D3hot
>pci 0000:00:1f.3: [8086:1e22] type 0 class 0x000c05
>pci 0000:00:1f.3: reg 10: [mem 0xb0c30000-0xb0c300ff 64bit]
>pci 0000:00:1f.3: reg 20: [io  0x3040-0x305f]
>pci 0000:00:1c.0: PCI bridge to [bus 01-01]
>pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
>pci 0000:00:1c.0:   bridge window [mem 0xb0000000-0xb09fffff]
>pci 0000:00:1c.0:   bridge window [mem 0xd0000000-0xd09fffff 64bit pref]
>pci 0000:02:00.0: [8086:0082] type 0 class 0x000280
>pci 0000:02:00.0: reg 10: [mem 0xb0b00000-0xb0b01fff 64bit]
>pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.6: PCI bridge to [bus 02-02]
>pci 0000:00:1c.6:   bridge window [mem 0xb0b00000-0xb0bfffff]
>pci 0000:03:00.0: [104c:8231] type 1 class 0x000604
>pci 0000:03:00.0: supports D1 D2
>pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
>pci 0000:00:1c.7: PCI bridge to [bus 03-04]
>pci 0000:00:1c.7:   bridge window [mem 0xb0a00000-0xb0afffff]
>pci 0000:04:00.0: [104c:8235] type 0 class 0x000c00
>pci 0000:04:00.0: reg 10: [mem 0xb0a10000-0xb0a107ff]
>pci 0000:04:00.0: reg 14: [mem 0xb0a00000-0xb0a03fff]
>pci 0000:04:00.0: supports D1 D2
>pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot
>pci 0000:03:00.0: PCI bridge to [bus 04-04]
>pci 0000:03:00.0:   bridge window [mem 0xb0a00000-0xb0afffff]
>pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [mem 0xafa00000-0xfeafffff] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [mem 0x14e600000-0x54e5fffff] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP07._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP08._PRT]
>\_SB_.PCI0:_OSC invalid UUID
>_OSC request data:1 1f 1f 
> pci0000:00: Requesting ACPI _OSC control (0x1d)
>\_SB_.PCI0:_OSC invalid UUID
>_OSC request data:1 0 1d 
> pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d
>ACPI _OSC control for PCIe not granted, disabling ASPM
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
>vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
>vgaarb: loaded
>vgaarb: bridge control possible 0000:00:02.0
>SCSI subsystem initialized
>libata version 3.00 loaded.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: pci_cache_line_size set to 64 bytes
>reserve RAM buffer: 000000000009ac00 - 000000000009ffff 
>reserve RAM buffer: 0000000040004000 - 0000000043ffffff 
>reserve RAM buffer: 00000000a8c0f000 - 00000000abffffff 
>reserve RAM buffer: 00000000aa5c4000 - 00000000abffffff 
>reserve RAM buffer: 00000000ab000000 - 00000000abffffff 
>reserve RAM buffer: 000000014e600000 - 000000014fffffff 
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
>hpet0: 8 comparators, 64-bit 14.318180 MHz counter
>Switching to clocksource hpet
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp 00:00: [bus 00-3e]
>pnp 00:00: [io  0x0000-0x0cf7 window]
>pnp 00:00: [io  0x0cf8-0x0cff]
>pnp 00:00: [io  0x0d00-0xffff window]
>pnp 00:00: [mem 0x000a0000-0x000bffff window]
>pnp 00:00: [mem 0x000c0000-0x000c3fff window]
>pnp 00:00: [mem 0x000c4000-0x000c7fff window]
>pnp 00:00: [mem 0x000c8000-0x000cbfff window]
>pnp 00:00: [mem 0x000cc000-0x000cffff window]
>pnp 00:00: [mem 0x000d0000-0x000d3fff window]
>pnp 00:00: [mem 0x000d4000-0x000d7fff window]
>pnp 00:00: [mem 0x000d8000-0x000dbfff window]
>pnp 00:00: [mem 0x000dc000-0x000dffff window]
>pnp 00:00: [mem 0x000e0000-0x000e3fff window]
>pnp 00:00: [mem 0x000e4000-0x000e7fff window]
>pnp 00:00: [mem 0x000e8000-0x000ebfff window]
>pnp 00:00: [mem 0x000ec000-0x000effff window]
>pnp 00:00: [mem 0x000f0000-0x000fffff window]
>pnp 00:00: [mem 0xafa00000-0xfeafffff window]
>pnp 00:00: [mem 0x14e600000-0x54e5fffff window]
>pnp 00:00: [mem 0xfed40000-0xfed44fff window]
>pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
>pnp 00:01: [io  0x0000-0x001f]
>pnp 00:01: [io  0x0081-0x0091]
>pnp 00:01: [io  0x0093-0x009f]
>pnp 00:01: [io  0x00c0-0x00df]
>pnp 00:01: [dma 4]
>pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
>pnp 00:02: [mem 0xff000000-0xffffffff]
>pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
>pnp 00:03: [mem 0xfed00000-0xfed003ff]
>pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
>pnp 00:04: [io  0x00f0]
>pnp 00:04: [irq 13]
>pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
>pnp 00:05: [io  0x002e-0x002f]
>pnp 00:05: [io  0x004e-0x004f]
>pnp 00:05: [io  0x0061]
>pnp 00:05: [io  0x0063]
>pnp 00:05: [io  0x0065]
>pnp 00:05: [io  0x0067]
>pnp 00:05: [io  0x0070]
>pnp 00:05: [io  0x0080]
>pnp 00:05: [io  0x0092]
>pnp 00:05: [io  0x00b2-0x00b3]
>pnp 00:05: [io  0x0680-0x069f]
>pnp 00:05: [io  0x1000-0x100f]
>pnp 00:05: [io  0xffff]
>pnp 00:05: [io  0xffff]
>pnp 00:05: [io  0x0400-0x0453]
>pnp 00:05: [io  0x0458-0x047f]
>pnp 00:05: [io  0x0500-0x057f]
>pnp 00:05: [io  0x164e-0x164f]
>system 00:05: [io  0x0680-0x069f] has been reserved
>system 00:05: [io  0x1000-0x100f] has been reserved
>system 00:05: [io  0xffff] has been reserved
>system 00:05: [io  0xffff] has been reserved
>system 00:05: [io  0x0400-0x0453] has been reserved
>system 00:05: [io  0x0458-0x047f] has been reserved
>system 00:05: [io  0x0500-0x057f] has been reserved
>system 00:05: [io  0x164e-0x164f] has been reserved
>system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp 00:06: [io  0x0070-0x0077]
>pnp 00:06: [irq 8]
>pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
>pnp 00:07: [io  0x0454-0x0457]
>system 00:07: [io  0x0454-0x0457] has been reserved
>system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
>pnp 00:08: [mem 0xfed1c000-0xfed1ffff]
>pnp 00:08: [mem 0xfed10000-0xfed17fff]
>pnp 00:08: [mem 0xfed18000-0xfed18fff]
>pnp 00:08: [mem 0xfed19000-0xfed19fff]
>pnp 00:08: [mem 0xf8000000-0xfbffffff]
>pnp 00:08: [mem 0xfed20000-0xfed3ffff]
>pnp 00:08: [mem 0xfed90000-0xfed93fff]
>pnp 00:08: [mem 0xfed45000-0xfed8ffff]
>pnp 00:08: [mem 0xff000000-0xffffffff]
>pnp 00:08: [mem 0xfee00000-0xfeefffff]
>pnp 00:08: [mem 0xafa00000-0xafa00fff]
>pnp 00:08: [mem 0x00000000-0xffffffffffffffff disabled]
>system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
>system 00:08: [mem 0xfed10000-0xfed17fff] could not be reserved
>system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
>system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
>system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved
>system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
>system 00:08: [mem 0xfed90000-0xfed93fff] has been reserved
>system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
>system 00:08: [mem 0xff000000-0xffffffff] could not be reserved
>system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
>system 00:08: [mem 0xafa00000-0xafa00fff] has been reserved
>system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp 00:09: [mem 0x00000000-0x0009cfff]
>system 00:09: [mem 0x00000000-0x0009cfff] could not be reserved
>system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
>pnp 00:0a: [mem 0x20000000-0x201fffff]
>pnp 00:0a: [mem 0x40004000-0x40004fff]
>system 00:0a: [mem 0x20000000-0x201fffff] has been reserved
>system 00:0a: [mem 0x40004000-0x40004fff] has been reserved
>system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
>pnp: PnP ACPI: found 11 devices
>ACPI: ACPI bus type pnp unregistered
>PCI: max bus depth: 2 pci_try_num: 3
>pci 0000:00:1c.0: PCI bridge to [bus 01-01]
>pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
>pci 0000:00:1c.0:   bridge window [mem 0xb0000000-0xb09fffff]
>pci 0000:00:1c.0:   bridge window [mem 0xd0000000-0xd09fffff 64bit pref]
>pci 0000:00:1c.6: PCI bridge to [bus 02-02]
>pci 0000:00:1c.6:   bridge window [mem 0xb0b00000-0xb0bfffff]
>pci 0000:03:00.0: PCI bridge to [bus 04-04]
>pci 0000:03:00.0:   bridge window [mem 0xb0a00000-0xb0afffff]
>pci 0000:00:1c.7: PCI bridge to [bus 03-04]
>pci 0000:00:1c.7:   bridge window [mem 0xb0a00000-0xb0afffff]
>pci 0000:00:1e.0: PCI bridge to [bus 05-05]
>pci 0000:00:1e.0: setting latency timer to 64
>pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
>pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
>pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
>pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
>pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
>pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
>pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
>pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
>pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
>pci_bus 0000:00: resource 13 [mem 0xafa00000-0xfeafffff]
>pci_bus 0000:00: resource 14 [mem 0x14e600000-0x54e5fffff]
>pci_bus 0000:00: resource 15 [mem 0xfed40000-0xfed44fff]
>pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
>pci_bus 0000:01: resource 1 [mem 0xb0000000-0xb09fffff]
>pci_bus 0000:01: resource 2 [mem 0xd0000000-0xd09fffff 64bit pref]
>pci_bus 0000:02: resource 1 [mem 0xb0b00000-0xb0bfffff]
>pci_bus 0000:03: resource 1 [mem 0xb0a00000-0xb0afffff]
>pci_bus 0000:04: resource 1 [mem 0xb0a00000-0xb0afffff]
>pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7]
>pci_bus 0000:05: resource 5 [io  0x0d00-0xffff]
>pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
>pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000d3fff]
>pci_bus 0000:05: resource 8 [mem 0x000d4000-0x000d7fff]
>pci_bus 0000:05: resource 9 [mem 0x000d8000-0x000dbfff]
>pci_bus 0000:05: resource 10 [mem 0x000dc000-0x000dffff]
>pci_bus 0000:05: resource 11 [mem 0x000e0000-0x000e3fff]
>pci_bus 0000:05: resource 12 [mem 0x000e4000-0x000e7fff]
>pci_bus 0000:05: resource 13 [mem 0xafa00000-0xfeafffff]
>pci_bus 0000:05: resource 14 [mem 0x14e600000-0x54e5fffff]
>pci_bus 0000:05: resource 15 [mem 0xfed40000-0xfed44fff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 524288 bind 65536)
>TCP reno registered
>UDP hash table entries: 2048 (order: 4, 65536 bytes)
>UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
>NET: Registered protocol family 1
>pci 0000:00:02.0: Boot video device
>pci 0000:03:00.0: TI XIO2000a quirk detected; secondary bus fast back-to-back transfers disabled
>PCI: CLS 64 bytes, default 64
>Trying to unpack rootfs image as initramfs...
>Freeing initrd memory: 12248k freed
>PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>Placing 64MB software IO TLB between ffff8800a4c0f000 - ffff8800a8c0f000
>software IO TLB at phys 0xa4c0f000 - 0xa8c0f000
>audit: initializing netlink socket (disabled)
>type=2000 audit(1328885472.464:1): initialized
>HugeTLB registered 2 MB page size, pre-allocated 0 pages
>VFS: Disk quotas dquot_6.5.2
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>Btrfs loaded
>msgmni has been set to 7677
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Fan [FAN0] (off)
>ACPI: Fan [FAN1] (off)
>ACPI: Fan [FAN2] (off)
>ACPI: Fan [FAN3] (off)
>ACPI: Fan [FAN4] (off)
>Monitor-Mwait will be used to enter C-1 state
>Monitor-Mwait will be used to enter C-2 state
>Monitor-Mwait will be used to enter C-3 state
>ACPI: acpi_idle registered with cpuidle
>thermal LNXTHERM:00: registered as thermal_zone0
>ACPI: Thermal Zone [TZ00] (28 C)
>thermal LNXTHERM:01: registered as thermal_zone1
>ACPI: Thermal Zone [TZ01] (30 C)
>Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>0000:00:16.3: ttyS0 at I/O 0x30e0 (irq = 19) is a 16550A
>Non-volatile memory driver v1.3
>Linux agpgart interface v0.103
>agpgart-intel 0000:00:00.0: Intel Ivybridge Chipset
>agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
>agpgart-intel 0000:00:00.0: detected 65536K stolen memory
>agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
>brd: module loaded
>ahci 0000:00:1f.2: version 3.0
>ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
>ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x4 impl SATA mode
>ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst 
>ahci 0000:00:1f.2: setting latency timer to 64
>scsi0 : ahci
>scsi1 : ahci
>scsi2 : ahci
>scsi3 : ahci
>scsi4 : ahci
>scsi5 : ahci
>ata1: DUMMY
>ata2: DUMMY
>ata3: SATA max UDMA/133 abar m2048@0xb0c40000 port 0xb0c40200 irq 40
>ata4: DUMMY
>ata5: DUMMY
>ata6: DUMMY
>i8042: PNP: No PS/2 controller found. Probing ports directly.
>i8042: No controller found
>mousedev: PS/2 mouse device common for all mice
>rtc_cmos 00:06: RTC can wake from S4
>rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
>cpuidle: using governor ladder
>cpuidle: using governor menu
>EFI Variables Facility v0.08 2004-May-17
>usbcore: registered new interface driver usbhid
>usbhid: USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 17
>Registering the dns_resolver key type
>PM: Hibernation image not present or could not be loaded.
>registered taskstats version 1
>  Magic number: 0:549:889
>ahci 0000:00:1f.2: hash matches
>ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata3.00: ATA-8: WDC WD5000AAKX-603CA0, 16.01H16, max UDMA/100
>ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
>ata3.00: configured for UDMA/100
>scsi 2:0:0:0: Direct-Access     ATA      WDC WD5000AAKX-6 16.0 PQ: 0 ANSI: 5
>Freeing unused kernel memory: 536k freed
>Write protecting the kernel read-only data: 6144k
>Freeing unused kernel memory: 168k freed
>Freeing unused kernel memory: 172k freed
>dracut: dracut-009-10.fc15
>dracut: rd.luks=0: removing cryptoluks activation
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
>udev[875]: starting version 167
>input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
>ACPI: Power Button [PWRF]
>[drm] Initialized drm 1.1.0 20060810
>i915 0000:00:02.0: setting latency timer to 64
>mtrr: no more MTRRs available
>[drm] MTRR allocation failed.  Graphics performance may suffer.
>[drm:intel_opregion_setup], graphic opregion physical addr: 0xaafce018
>[drm:intel_opregion_setup], SWSCI supported
>i915 0000:00:02.0: irq 41 for MSI/MSI-X
>[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
>[drm] Driver supports precise vblank timestamp query.
>[drm:intel_detect_pch], Found PatherPoint PCH
>[drm:init_vbt_defaults], Set default to SSC at 100MHz
>[drm:intel_parse_bios], Using VBT from OpRegion: $VBT SNB/IVB-DESKTOPd
>[drm:parse_general_features], BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 0 lvds_ssc_freq 120 display_clock_mode 0
>[drm:parse_general_definitions], crt_ddc_bus_pin: 2
>[drm:parse_lfp_panel_data], Found panel mode in BIOS VBT tables:
>[drm:drm_mode_debug_printmodeline], Modeline 0:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
>[drm:parse_sdvo_panel_data], Found SDVO panel mode in BIOS VBT tables:
>[drm:drm_mode_debug_printmodeline], Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
>[drm:parse_sdvo_device_mapping], No SDVO device info is found in VBT
>[drm:intel_dsm_platform_mux_info] *ERROR* MUX INFO call failed
>[drm:intel_init_display], Using MT version of forcewake
>[drm:intel_modeset_init], 3 display pipes available.
>vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
>[drm:intel_crt_init], pch crt adpa set to 0x80f40010
>[drm:intel_sdvo_read_byte], i2c transfer returned -6
>[drm:intel_sdvo_init], No SDVO device found on SDVOB
>[drm:intel_dp_i2c_init], i2c_init DPDDC-B
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_i2c_aux_ch], aux_ch failed -110
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_i2c_aux_ch], aux_ch failed -110
>[drm:intel_dp_i2c_init], i2c_init DPDDC-C
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_i2c_aux_ch], aux_ch failed -110
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_i2c_aux_ch], aux_ch failed -110
>[drm:intel_dp_i2c_init], i2c_init DPDDC-D
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_i2c_aux_ch], aux_ch failed -110
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_i2c_aux_ch], aux_ch failed -110
>[drm:ironlake_crtc_dpms], crtc 0/0 dpms off
>[drm:i915_get_vblank_timestamp], crtc 0 is disabled
>[drm:intel_update_fbc], 
>[drm:ironlake_crtc_dpms], crtc 1/1 dpms off
>[drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe B
>[drm:i915_get_vblank_timestamp], crtc 1 is disabled
>[drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe B
>[drm:intel_update_fbc], 
>[drm:ironlake_crtc_dpms], crtc 2/2 dpms off
>[drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe C
>[drm:i915_get_vblank_timestamp], crtc 2 is disabled
>[drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe C
>[drm:intel_update_fbc], 
>[drm:ironlake_init_pch_refclk], has_panel 0 has_lvds 0 has_pch_edp 0 has_cpu_edp 0 has_ck505 0
>[drm:ironlake_init_pch_refclk], Disabling SSC entirely
>[drm:intel_enable_rc6], RC6 enabled
>[drm:init_status_page], render ring hws offset: 0x00000000
>[drm:init_status_page], gen6 bsd ring hws offset: 0x00022000
>[drm:init_status_page], blt ring hws offset: 0x00043000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1]
>[drm:intel_ironlake_crt_detect_hotplug], trigger hotplug detect cycle: adpa=0xf40010
>[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40010, result 0
>[drm:intel_crt_detect], CRT not detected via hotplug
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] disconnected
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] disconnected
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:DP-1]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_detect], DPCD: 0000000000000000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:DP-1] disconnected
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] disconnected
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-3]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-3] disconnected
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-2]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_detect], DPCD: 0000000000000000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-2] disconnected
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-3]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_detect], DPCD: 0000000000000000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-3] disconnected
>No connectors reported connected with modes
>[drm:drm_setup_crtcs], 
>[drm:drm_enable_connectors], connector 9 enabled? no
>[drm:drm_enable_connectors], connector 12 enabled? no
>[drm:drm_enable_connectors], connector 15 enabled? no
>[drm:drm_enable_connectors], connector 18 enabled? no
>[drm:drm_enable_connectors], connector 20 enabled? no
>[drm:drm_enable_connectors], connector 21 enabled? no
>[drm:drm_enable_connectors], connector 23 enabled? no
>[drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config
>[drm] Cannot find any crtc or sizes - going 1024x768
>[drm:intelfb_create], allocated 1024x768 fb: 0x00064000, bo ffff880148cd9a00
>fbcon: inteldrmfb (fb0) is primary device
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [NOFB]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:5] [NOFB]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:7] [NOFB]
>Console: switching to colour frame buffer device 128x48
>fb0: inteldrmfb frame buffer device
>drm: registered panic notifier
>acpi device:5a: registered as cooling_device13
>input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input1
>ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
>[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
>dracut: Starting plymouth daemon
>dracut: rd.dm=0: removing DM RAID activation
>dracut: rd.md=0: removing MD RAID activation
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ehci_hcd 0000:00:1a.0: setting latency timer to 64
>ehci_hcd 0000:00:1a.0: EHCI Host Controller
>ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1a.0: debug port 2
>sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
>sd 2:0:0:0: [sda] Write Protect is off
>sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
>ehci_hcd 0000:00:1a.0: irq 16, io mem 0xb0c70000
>ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 3.3.0-rc1_unstable_20120209+ ehci_hcd
>usb usb1: SerialNumber: 0000:00:1a.0
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 3 ports detected
>ehci_hcd 0000:00:1d.0: setting latency timer to 64
>ehci_hcd 0000:00:1d.0: EHCI Host Controller
>ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:1d.0: debug port 2
>ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
>ehci_hcd 0000:00:1d.0: irq 23, io mem 0xb0c50000
>ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: EHCI Host Controller
>usb usb2: Manufacturer: Linux 3.3.0-rc1_unstable_20120209+ ehci_hcd
>usb usb2: SerialNumber: 0000:00:1d.0
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 3 ports detected
> sda: sda1 sda2
>sd 2:0:0:0: [sda] Attached SCSI disk
>firewire_ohci: Added fw-ohci device 0000:04:00.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
>Refined TSC clocksource calibration: 2195.012 MHz.
>Switching to clocksource tsc
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs (sda1): mounted filesystem with ordered data mode
>usb 1-1: new high-speed USB device number 2 using ehci_hcd
>dracut: Checking filesystems
>dracut: fsck -T -t noopts=_netdev -A -a
>usb 1-1: New USB device found, idVendor=8087, idProduct=0024
>usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>hub 1-1:1.0: USB hub found
>hub 1-1:1.0: 6 ports detected
>usb 2-1: new high-speed USB device number 2 using ehci_hcd
>firewire_core: created device fw0: GUID 354fc00035e71a01, S400
>usb 2-1: New USB device found, idVendor=8087, idProduct=0024
>usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>hub 2-1:1.0: USB hub found
>hub 2-1:1.0: 8 ports detected
>dracut: /dev/sda1: clean, 1622719/12804096 files, 25539358/51200000 blocks
>dracut: Remounting /dev/disk/by-uuid/c51f5655-e8ec-4bd8-9c44-24576fe757c1 with -o ro,
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs (sda1): mounted filesystem with ordered data mode
>dracut: Mounted root filesystem /dev/sda1
>usb 2-1.5: new low-speed USB device number 3 using ehci_hcd
>usb 2-1.5: New USB device found, idVendor=03f0, idProduct=0024
>usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 2-1.5: Product: HP Basic USB Keyboard
>usb 2-1.5: Manufacturer: CHICONY
>input: CHICONY HP Basic USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input2
>generic-usb 0003:03F0:0024.0001: input,hidraw0: USB HID v1.10 Keyboard [CHICONY HP Basic USB Keyboard] on usb-0000:00:1d.0-1.5/input0
>dracut: Switching root
>usb 2-1.6: new low-speed USB device number 4 using ehci_hcd
>usb 2-1.6: New USB device found, idVendor=0461, idProduct=4d22
>usb 2-1.6: New USB device strings: Mfr=0, Product=2, SerialNumber=0
>usb 2-1.6: Product: USB Optical Mouse
>input: USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/input/input3
>generic-usb 0003:0461:4D22.0002: input,hidraw1: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.0-1.6/input0
>systemd[1]: systemd 26 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +SYSVINIT +LIBCRYPTSETUP; fedora)
>NET: Registered protocol family 10
>systemd[1]: Set hostname to <x-ivb4>.
>systemd-readahead-collect[1723]: Failed to create fanotify object: Function not implemented
>systemd[1]: systemd-readahead-collect.service: main process exited, code=exited, status=1
>EXT3-fs (sda1): using internal journal
>udev[1749]: starting version 167
>microcode: CPU0 sig=0x306a4, pf=0x2, revision=0x7
>sd 2:0:0:0: Attached scsi generic sg0 type 0
>input: PC Speaker as /devices/platform/pcspkr/input/input4
>microcode: CPU1 sig=0x306a4, pf=0x2, revision=0x7
>microcode: CPU2 sig=0x306a4, pf=0x2, revision=0x7
>microcode: CPU3 sig=0x306a4, pf=0x2, revision=0x7
>microcode: CPU4 sig=0x306a4, pf=0x2, revision=0x7
>microcode: CPU5 sig=0x306a4, pf=0x2, revision=0x7
>microcode: CPU6 sig=0x306a4, pf=0x2, revision=0x7
>microcode: CPU7 sig=0x306a4, pf=0x2, revision=0x7
>microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
>iTCO_vendor_support: vendor-support=0
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
>iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>mtp-probe[2436]: checking bus 2, device 4: "/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6"
>mtp-probe[2435]: checking bus 2, device 3: "/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5"
>mtp-probe[2436]: bus: 2, device: 4 was not an MTP device
>mtp-probe[2435]: bus: 2, device: 3 was not an MTP device
>e1000e: Intel(R) PRO/1000 Network Driver - 1.5.1-k
>e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
>e1000e 0000:00:19.0: setting latency timer to 64
>e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
>e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) 00:13:20:f9:de:7e
>e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
>e1000e 0000:00:19.0: eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
>ACPI Warning: 0x0000000000003040-0x000000000000305f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20120111/utaddress-251)
>ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
>Adding 2047996k swap on /dev/sda2.  Priority:0 extents:1 across:2047996k 
>hda_codec: ALC889: BIOS auto-probing.
>hda_codec: ALC889: SKU not ready 0x598301f0
>ALSA sound/pci/hda/hda_codec.c:4923 autoconfig: line_outs=3 (0x14/0x19/0x16/0x0/0x0) type:line
>ALSA sound/pci/hda/hda_codec.c:4927    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:4931    hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:4932    mono: mono_out=0x0
>ALSA sound/pci/hda/hda_codec.c:4935    dig-out=0x1e/0x0
>ALSA sound/pci/hda/hda_codec.c:4936    inputs:
>ALSA sound/pci/hda/hda_codec.c:4940  Front Mic=0x18
>ALSA sound/pci/hda/hda_codec.c:4940  Rear Mic=0x1b
>ALSA sound/pci/hda/hda_codec.c:4940  Line=0x1a
>ALSA sound/pci/hda/hda_codec.c:4942 
>ALSA sound/pci/hda/patch_realtek.c:1302 realtek: No valid SSID, checking pincfg 0x598301f0 for NID 0x1d
>ALSA sound/pci/hda/patch_realtek.c:1385 realtek: Enable default setup for auto mode as fallback
>/usr/sbin/gpm[2616]: *** info [daemon/startup.c(136)]:
>/usr/sbin/gpm[2616]: Started gpm successfully. Entered daemon mode.
>acpid[2632]: starting up with proc fs
>acpid[2632]: skipping incomplete file /etc/acpi/events/videoconf
>acpid[2632]: 1 rule loaded
>acpid[2632]: waiting for events: event logging is off
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>ip_tables: (C) 2000-2006 Netfilter Core Team
>[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40010, result 0
>[drm:intel_crt_detect], CRT not detected via hotplug
>[drm:output_poll_execute], [CONNECTOR:9:VGA-1] status updated from 2 to 2
>[drm:output_poll_execute], [CONNECTOR:12:HDMI-A-1] status updated from 2 to 2
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_detect], DPCD: 0000000000000000
>[drm:output_poll_execute], [CONNECTOR:15:DP-1] status updated from 2 to 2
>[drm:output_poll_execute], [CONNECTOR:18:HDMI-A-2] status updated from 2 to 2
>[drm:output_poll_execute], [CONNECTOR:20:HDMI-A-3] status updated from 2 to 2
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_detect], DPCD: 0000000000000000
>[drm:output_poll_execute], [CONNECTOR:21:DP-2] status updated from 2 to 2
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_detect], DPCD: 0000000000000000
>[drm:output_poll_execute], [CONNECTOR:23:DP-3] status updated from 2 to 2
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>auditd (2736): /proc/2736/oom_adj is deprecated, please use /proc/2736/oom_score_adj instead.
>e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
>e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [NOFB]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:5] [NOFB]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:7] [NOFB]
>RPC: Registered named UNIX socket transport module.
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>RPC: Registered tcp NFSv4.1 backchannel transport module.
>e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
>e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>eth0: no IPv6 routers present
>[drm:i915_driver_open], 
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [NOFB]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:5] [NOFB]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:7] [NOFB]
>[drm:i915_driver_open], 
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [NOFB]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:5] [NOFB]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:7] [NOFB]
>[drm:i915_driver_open], 
>[drm:drm_mode_getresources], CRTC[3] CONNECTORS[7] ENCODERS[7]
>[drm:drm_mode_getresources], CRTC[3] CONNECTORS[7] ENCODERS[7]
>[drm:drm_mode_getconnector], [CONNECTOR:9:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1]
>[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40010, result 0
>[drm:intel_crt_detect], CRT not detected via hotplug
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:9:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1]
>[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40010, result 0
>[drm:intel_crt_detect], CRT not detected via hotplug
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:12:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:12:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:15:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:DP-1]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_detect], DPCD: 0000000000000000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:DP-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:15:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:DP-1]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_detect], DPCD: 0000000000000000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:DP-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:18:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:18:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:20:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-3]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-3] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:20:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-3]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-3] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:21:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-2]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_detect], DPCD: 0000000000000000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-2] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:21:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-2]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_detect], DPCD: 0000000000000000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-2] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:23:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-3]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_detect], DPCD: 0000000000000000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-3] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:23:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-3]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_detect], DPCD: 0000000000000000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-3] disconnected
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [NOFB]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:5] [NOFB]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:7] [NOFB]
>[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40010, result 0
>[drm:intel_crt_detect], CRT not detected via hotplug
>[drm:output_poll_execute], [CONNECTOR:9:VGA-1] status updated from 2 to 2
>[drm:output_poll_execute], [CONNECTOR:12:HDMI-A-1] status updated from 2 to 2
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_detect], DPCD: 0000000000000000
>[drm:output_poll_execute], [CONNECTOR:15:DP-1] status updated from 2 to 2
>[drm:output_poll_execute], [CONNECTOR:18:HDMI-A-2] status updated from 2 to 2
>[drm:output_poll_execute], [CONNECTOR:20:HDMI-A-3] status updated from 2 to 2
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_detect], DPCD: 0000000000000000
>[drm:output_poll_execute], [CONNECTOR:21:DP-2] status updated from 2 to 2
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_detect], DPCD: 0000000000000000
>[drm:output_poll_execute], [CONNECTOR:23:DP-3] status updated from 2 to 2
>[drm:pch_irq_handler], PCH transcoder audio interrupt
>[drm:i915_hotplug_work_func], running encoder hotplug functions
>[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40010, result 0
>[drm:intel_crt_detect], CRT not detected via hotplug
>[drm:output_poll_execute], [CONNECTOR:9:VGA-1] status updated from 2 to 2
>[drm:output_poll_execute], [CONNECTOR:12:HDMI-A-1] status updated from 2 to 2
>[drm:intel_dp_detect], DPCD: 110a840101000100
>[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[drm:drm_detect_monitor_audio], Monitor has basic audio support
>[drm:output_poll_execute], [CONNECTOR:15:DP-1] status updated from 2 to 1
>[drm:output_poll_execute], [CONNECTOR:18:HDMI-A-2] status updated from 2 to 2
>[drm:output_poll_execute], [CONNECTOR:20:HDMI-A-3] status updated from 2 to 2
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_detect], DPCD: 0000000000000000
>[drm:output_poll_execute], [CONNECTOR:21:DP-2] status updated from 2 to 2
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_detect], DPCD: 0000000000000000
>[drm:output_poll_execute], [CONNECTOR:23:DP-3] status updated from 2 to 2
>[drm:drm_fb_helper_hotplug_event], 
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1]
>[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40010, result 0
>[drm:intel_crt_detect], CRT not detected via hotplug
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] disconnected
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] disconnected
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:DP-1]
>[drm:intel_dp_detect], DPCD: 110a840101000100
>[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[drm:drm_detect_monitor_audio], Monitor has basic audio support
>[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[drm:drm_edid_to_eld], ELD monitor DELL U3011
>[drm:drm_edid_to_eld], ELD size 9, SAD count 1
>[drm:drm_mode_debug_printmodeline], Modeline 61:"1920x1080" 0 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x5
>[drm:drm_mode_prune_invalid], Not using 1920x1080 mode 12
>[drm:drm_mode_debug_printmodeline], Modeline 60:"1920x1080" 0 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5
>[drm:drm_mode_prune_invalid], Not using 1920x1080 mode 12
>[drm:drm_mode_debug_printmodeline], Modeline 59:"1920x1080" 0 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x40 0x15
>[drm:drm_mode_prune_invalid], Not using 1920x1080 mode 12
>[drm:drm_mode_debug_printmodeline], Modeline 58:"1280x720" 0 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5
>[drm:drm_mode_prune_invalid], Not using 1280x720 mode 11
>[drm:drm_mode_debug_printmodeline], Modeline 57:"1440x576" 0 27000 1440 1464 1590 1728 576 580 586 625 0x40 0x1a
>[drm:drm_mode_prune_invalid], Not using 1440x576 mode 11
>[drm:drm_mode_debug_printmodeline], Modeline 54:"1440x480" 0 27000 1440 1478 1602 1716 480 488 494 525 0x40 0x1a
>[drm:drm_mode_prune_invalid], Not using 1440x480 mode 11
>[drm:drm_mode_debug_printmodeline], Modeline 48:"1280x720" 0 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
>[drm:drm_mode_prune_invalid], Not using 1280x720 mode 11
>[drm:drm_mode_debug_printmodeline], Modeline 47:"1920x1080" 0 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15
>[drm:drm_mode_prune_invalid], Not using 1920x1080 mode 12
>[drm:drm_mode_debug_printmodeline], Modeline 46:"1920x1080" 0 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
>[drm:drm_mode_prune_invalid], Not using 1920x1080 mode 12
>[drm:drm_mode_debug_printmodeline], Modeline 42:"1280x1024" 0 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_mode_prune_invalid], Not using 1280x1024 mode 12
>[drm:drm_mode_debug_printmodeline], Modeline 37:"1920x1440" 0 234000 1920 2048 2256 2600 1440 1441 1444 1500 0x40 0x6
>[drm:drm_mode_prune_invalid], Not using 1920x1440 mode 12
>[drm:drm_mode_debug_printmodeline], Modeline 36:"1920x1200" 0 193250 1920 2056 2256 2592 1200 1203 1209 1245 0x40 0x6
>[drm:drm_mode_prune_invalid], Not using 1920x1200 mode 12
>[drm:drm_mode_debug_printmodeline], Modeline 35:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
>[drm:drm_mode_prune_invalid], Not using 1600x1200 mode 12
>[drm:drm_mode_debug_printmodeline], Modeline 34:"1280x1024" 0 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_mode_prune_invalid], Not using 1280x1024 mode 12
>[drm:drm_mode_debug_printmodeline], Modeline 33:"1280x800" 0 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x9
>[drm:drm_mode_prune_invalid], Not using 1280x800 mode 12
>[drm:drm_mode_debug_printmodeline], Modeline 32:"1152x864" 0 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
>[drm:drm_mode_prune_invalid], Not using 1152x864 mode 12
>[drm:drm_mode_debug_printmodeline], Modeline 27:"2560x1600" 0 268500 2560 2608 2640 2720 1600 1603 1609 1646 0x48 0x9
>[drm:drm_mode_prune_invalid], Not using 2560x1600 mode 12
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:DP-1] probed modes :
>[drm:drm_mode_debug_printmodeline], Modeline 43:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 44:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 45:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 38:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 56:"720x576" 50 27000 720 732 796 864 576 581 586 625 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 50:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 39:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 40:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 53:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 41:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] disconnected
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-3]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-3] disconnected
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-2]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_detect], DPCD: 0000000000000000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-2] disconnected
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-3]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_detect], DPCD: 0000000000000000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-3] disconnected
>[drm:drm_setup_crtcs], 
>[drm:drm_enable_connectors], connector 9 enabled? no
>[drm:drm_enable_connectors], connector 12 enabled? no
>[drm:drm_enable_connectors], connector 15 enabled? yes
>[drm:drm_enable_connectors], connector 18 enabled? no
>[drm:drm_enable_connectors], connector 20 enabled? no
>[drm:drm_enable_connectors], connector 21 enabled? no
>[drm:drm_enable_connectors], connector 23 enabled? no
>[drm:drm_target_preferred], looking for cmdline mode on connector 15
>[drm:drm_target_preferred], looking for preferred mode on connector 15
>[drm:drm_target_preferred], found mode 1024x768
>[drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config
>[drm:drm_setup_crtcs], desired mode 1024x768 set on crtc 3
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:25] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], crtc has no fb, full mode set
>[drm:drm_crtc_helper_set_config], modes are different, full mode set
>[drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[drm:drm_mode_debug_printmodeline], Modeline 27:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[drm:drm_crtc_helper_set_config], encoder changed, full mode switch
>[drm:drm_crtc_helper_set_config], crtc changed, full mode switch
>[drm:drm_crtc_helper_set_config], [CONNECTOR:15:DP-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], attempting to set mode from userspace
>[drm:drm_mode_debug_printmodeline], Modeline 27:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[drm:intel_dp_mode_fixup], Display port link bw 0a lane count 1 clock 270000
>[drm:drm_crtc_helper_set_mode], [CRTC:3]
>[drm:intel_choose_pipe_bpp_dither], clamping display bpc (was -1) to EDID reported max of 10
>[drm:intel_choose_pipe_bpp_dither], setting pipe bpc to 8 (max display bpc 8)
>[drm:ironlake_crtc_mode_set], Mode for pipe 0:
>[drm:drm_mode_debug_printmodeline], Modeline 27:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:ironlake_update_plane], Writing base 00064000 00000000 0 0 4096
>[drm:intel_update_fbc], 
>[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 5, cursor: 6
>[drm:ironlake_check_srwm], watermark 1: display plane 7, fbc lines 3, cursor 6
>[drm:ironlake_check_srwm], watermark 2: display plane 37, fbc lines 3, cursor 6
>[drm:ironlake_check_srwm], watermark 3: display plane 66, fbc lines 4, cursor 6
>[drm:drm_crtc_helper_set_mode], [ENCODER:16:TMDS-16] set [MODE:27:1024x768]
>[drm:intel_dp_mode_set], Enabling DP audio on pipe A
>[drm:intel_write_eld], ELD on [CONNECTOR:15:DP-1], [ENCODER:16:TMDS-16]
>[drm:ironlake_write_eld], ELD on pipe A
>[drm:ironlake_write_eld], Audio directed to unknown port
>[drm:ironlake_write_eld], ELD: DisplayPort detected
>[drm:ironlake_write_eld], ELD size 9
>[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 5, cursor: 6
>[drm:ironlake_check_srwm], watermark 1: display plane 7, fbc lines 3, cursor 6
>[drm:ironlake_check_srwm], watermark 2: display plane 37, fbc lines 3, cursor 6
>[drm:ironlake_check_srwm], watermark 3: display plane 66, fbc lines 4, cursor 6
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:ivb_manual_fdi_link_train], FDI_RX_IIR 0x700
>[drm:ivb_manual_fdi_link_train], FDI train 1 done.
>[drm:ivb_manual_fdi_link_train], FDI_RX_IIR 0x600
>[drm:ivb_manual_fdi_link_train], FDI train 2 done.
>[drm:ivb_manual_fdi_link_train], FDI train done.
>[drm:intel_update_fbc], 
>[drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000
>[drm:intel_dp_start_link_train], clock recovery OK
>[drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
>[drm:drm_crtc_helper_set_config], 	[CONNECTOR:15:DP-1] set DPMS on
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:5] [NOFB]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:7] [NOFB]
>[drm:intel_prepare_page_flip], preparing flip with no unpin work?
>[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40010, result 0
>[drm:intel_crt_detect], CRT not detected via hotplug
>[drm:output_poll_execute], [CONNECTOR:9:VGA-1] status updated from 2 to 2
>[drm:output_poll_execute], [CONNECTOR:12:HDMI-A-1] status updated from 2 to 2
>[drm:intel_dp_detect], DPCD: 110a840101000100
>[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[drm:drm_detect_monitor_audio], Monitor has basic audio support
>[drm:output_poll_execute], [CONNECTOR:15:DP-1] status updated from 1 to 1
>[drm:output_poll_execute], [CONNECTOR:18:HDMI-A-2] status updated from 2 to 2
>[drm:output_poll_execute], [CONNECTOR:20:HDMI-A-3] status updated from 2 to 2
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_detect], DPCD: 0000000000000000
>[drm:output_poll_execute], [CONNECTOR:21:DP-2] status updated from 2 to 2
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_detect], DPCD: 0000000000000000
>[drm:output_poll_execute], [CONNECTOR:23:DP-3] status updated from 2 to 2
>[drm:pch_irq_handler], PCH HDCP audio interrupt
>[drm:i915_hotplug_work_func], running encoder hotplug functions
>[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40010, result 0
>[drm:intel_crt_detect], CRT not detected via hotplug
>[drm:output_poll_execute], [CONNECTOR:9:VGA-1] status updated from 2 to 2
>[drm:output_poll_execute], [CONNECTOR:12:HDMI-A-1] status updated from 2 to 2
>[drm:intel_dp_detect], DPCD: 110a840101000100
>[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[drm:drm_detect_monitor_audio], Monitor has basic audio support
>[drm:output_poll_execute], [CONNECTOR:15:DP-1] status updated from 1 to 1
>[drm:output_poll_execute], [CONNECTOR:18:HDMI-A-2] status updated from 2 to 2
>[drm:output_poll_execute], [CONNECTOR:20:HDMI-A-3] status updated from 2 to 2
>[drm:intel_dp_detect], DPCD: 110a840101000000
>[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[drm:drm_detect_monitor_audio], Monitor has basic audio support
>[drm:output_poll_execute], [CONNECTOR:21:DP-2] status updated from 2 to 1
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_detect], DPCD: 0000000000000000
>[drm:output_poll_execute], [CONNECTOR:23:DP-3] status updated from 2 to 2
>[drm:drm_fb_helper_hotplug_event], 
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1]
>[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40010, result 0
>[drm:intel_crt_detect], CRT not detected via hotplug
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] disconnected
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] disconnected
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:DP-1]
>[drm:intel_dp_detect], DPCD: 110a840101000100
>[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[drm:drm_detect_monitor_audio], Monitor has basic audio support
>[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[drm:drm_edid_to_eld], ELD monitor DELL U3011
>[drm:drm_edid_to_eld], ELD size 9, SAD count 1
>[drm:drm_mode_debug_printmodeline], Modeline 72:"1920x1080" 0 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x5
>[drm:drm_mode_prune_invalid], Not using 1920x1080 mode 12
>[drm:drm_mode_debug_printmodeline], Modeline 71:"1920x1080" 0 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5
>[drm:drm_mode_prune_invalid], Not using 1920x1080 mode 12
>[drm:drm_mode_debug_printmodeline], Modeline 70:"1920x1080" 0 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x40 0x15
>[drm:drm_mode_prune_invalid], Not using 1920x1080 mode 12
>[drm:drm_mode_debug_printmodeline], Modeline 69:"1280x720" 0 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5
>[drm:drm_mode_prune_invalid], Not using 1280x720 mode 11
>[drm:drm_mode_debug_printmodeline], Modeline 68:"1440x576" 0 27000 1440 1464 1590 1728 576 580 586 625 0x40 0x1a
>[drm:drm_mode_prune_invalid], Not using 1440x576 mode 11
>[drm:drm_mode_debug_printmodeline], Modeline 65:"1440x480" 0 27000 1440 1478 1602 1716 480 488 494 525 0x40 0x1a
>[drm:drm_mode_prune_invalid], Not using 1440x480 mode 11
>[drm:drm_mode_debug_printmodeline], Modeline 59:"1280x720" 0 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
>[drm:drm_mode_prune_invalid], Not using 1280x720 mode 11
>[drm:drm_mode_debug_printmodeline], Modeline 58:"1920x1080" 0 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15
>[drm:drm_mode_prune_invalid], Not using 1920x1080 mode 12
>[drm:drm_mode_debug_printmodeline], Modeline 57:"1920x1080" 0 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
>[drm:drm_mode_prune_invalid], Not using 1920x1080 mode 12
>[drm:drm_mode_debug_printmodeline], Modeline 51:"1280x1024" 0 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_mode_prune_invalid], Not using 1280x1024 mode 12
>[drm:drm_mode_debug_printmodeline], Modeline 42:"1920x1440" 0 234000 1920 2048 2256 2600 1440 1441 1444 1500 0x40 0x6
>[drm:drm_mode_prune_invalid], Not using 1920x1440 mode 12
>[drm:drm_mode_debug_printmodeline], Modeline 37:"1920x1200" 0 193250 1920 2056 2256 2592 1200 1203 1209 1245 0x40 0x6
>[drm:drm_mode_prune_invalid], Not using 1920x1200 mode 12
>[drm:drm_mode_debug_printmodeline], Modeline 36:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
>[drm:drm_mode_prune_invalid], Not using 1600x1200 mode 12
>[drm:drm_mode_debug_printmodeline], Modeline 35:"1280x1024" 0 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_mode_prune_invalid], Not using 1280x1024 mode 12
>[drm:drm_mode_debug_printmodeline], Modeline 34:"1280x800" 0 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x9
>[drm:drm_mode_prune_invalid], Not using 1280x800 mode 12
>[drm:drm_mode_debug_printmodeline], Modeline 33:"1152x864" 0 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
>[drm:drm_mode_prune_invalid], Not using 1152x864 mode 12
>[drm:drm_mode_debug_printmodeline], Modeline 28:"2560x1600" 0 268500 2560 2608 2640 2720 1600 1603 1609 1646 0x48 0x9
>[drm:drm_mode_prune_invalid], Not using 2560x1600 mode 12
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:DP-1] probed modes :
>[drm:drm_mode_debug_printmodeline], Modeline 43:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 44:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 45:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 38:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 56:"720x576" 50 27000 720 732 796 864 576 581 586 625 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 50:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 39:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 40:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 53:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 41:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] disconnected
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-3]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-3] disconnected
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-2]
>[drm:intel_dp_detect], DPCD: 110a840101000000
>[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[drm:drm_detect_monitor_audio], Monitor has basic audio support
>[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[drm:drm_edid_to_eld], ELD monitor DELL U2410
>[drm:drm_edid_to_eld], ELD size 9, SAD count 1
>[drm:drm_mode_debug_printmodeline], Modeline 70:"1440x480" 0 27000 1440 1478 1602 1716 480 488 494 525 0x40 0x1a
>[drm:drm_mode_prune_invalid], Not using 1440x480 mode 11
>[drm:drm_mode_debug_printmodeline], Modeline 68:"1440x576" 0 27000 1440 1464 1590 1728 576 580 586 625 0x40 0x1a
>[drm:drm_mode_prune_invalid], Not using 1440x576 mode 11
>[drm:drm_mode_debug_printmodeline], Modeline 67:"1920x1080" 0 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x5
>[drm:drm_mode_prune_invalid], Not using 1920x1080 mode 12
>[drm:drm_mode_debug_printmodeline], Modeline 66:"1920x1080" 0 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x40 0x15
>[drm:drm_mode_prune_invalid], Not using 1920x1080 mode 12
>[drm:drm_mode_debug_printmodeline], Modeline 65:"1280x720" 0 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5
>[drm:drm_mode_prune_invalid], Not using 1280x720 mode 11
>[drm:drm_mode_debug_printmodeline], Modeline 63:"1920x1080" 0 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5
>[drm:drm_mode_prune_invalid], Not using 1920x1080 mode 12
>[drm:drm_mode_debug_printmodeline], Modeline 57:"1280x720" 0 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
>[drm:drm_mode_prune_invalid], Not using 1280x720 mode 11
>[drm:drm_mode_debug_printmodeline], Modeline 55:"1920x1080" 0 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15
>[drm:drm_mode_prune_invalid], Not using 1920x1080 mode 12
>[drm:drm_mode_debug_printmodeline], Modeline 54:"1920x1080" 0 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
>[drm:drm_mode_prune_invalid], Not using 1920x1080 mode 12
>[drm:drm_mode_debug_printmodeline], Modeline 48:"1280x1024" 0 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_mode_prune_invalid], Not using 1280x1024 mode 12
>[drm:drm_mode_debug_printmodeline], Modeline 36:"1152x864" 0 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
>[drm:drm_mode_prune_invalid], Not using 1152x864 mode 12
>[drm:drm_mode_debug_printmodeline], Modeline 35:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
>[drm:drm_mode_prune_invalid], Not using 1600x1200 mode 12
>[drm:drm_mode_debug_printmodeline], Modeline 34:"1280x1024" 0 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_mode_prune_invalid], Not using 1280x1024 mode 12
>[drm:drm_mode_debug_printmodeline], Modeline 29:"1920x1200" 0 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
>[drm:drm_mode_prune_invalid], Not using 1920x1200 mode 12
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-2] probed modes :
>[drm:drm_mode_debug_printmodeline], Modeline 49:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 51:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 52:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 37:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 69:"720x576" 50 27000 720 732 796 864 576 581 586 625 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 59:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 42:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 46:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 62:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 47:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-3]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_detect], DPCD: 0000000000000000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-3] disconnected
>[drm:drm_setup_crtcs], 
>[drm:drm_enable_connectors], connector 9 enabled? no
>[drm:drm_enable_connectors], connector 12 enabled? no
>[drm:drm_enable_connectors], connector 15 enabled? yes
>[drm:drm_enable_connectors], connector 18 enabled? no
>[drm:drm_enable_connectors], connector 20 enabled? no
>[drm:drm_enable_connectors], connector 21 enabled? yes
>[drm:drm_enable_connectors], connector 23 enabled? no
>[drm:drm_target_preferred], looking for cmdline mode on connector 15
>[drm:drm_target_preferred], looking for preferred mode on connector 15
>[drm:drm_target_preferred], found mode 1024x768
>[drm:drm_target_preferred], looking for cmdline mode on connector 21
>[drm:drm_target_preferred], looking for preferred mode on connector 21
>[drm:drm_target_preferred], found mode 1024x768
>[drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config
>[drm:drm_setup_crtcs], desired mode 1024x768 set on crtc 3
>[drm:drm_setup_crtcs], desired mode 1024x768 set on crtc 5
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:25] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], crtc changed, full mode switch
>[drm:drm_crtc_helper_set_config], [CONNECTOR:15:DP-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], attempting to set mode from userspace
>[drm:drm_mode_debug_printmodeline], Modeline 27:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[drm:intel_dp_mode_fixup], Display port link bw 0a lane count 1 clock 270000
>[drm:drm_crtc_helper_set_mode], [CRTC:3]
>[drm:intel_dp_link_down], 
>[drm:intel_prepare_page_flip], preparing flip with no unpin work?
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 5, cursor: 6
>[drm:ironlake_check_srwm], watermark 1: display plane 7, fbc lines 3, cursor 6
>[drm:ironlake_check_srwm], watermark 2: display plane 37, fbc lines 3, cursor 6
>[drm:ironlake_check_srwm], watermark 3: display plane 66, fbc lines 4, cursor 6
>[drm:intel_update_fbc], 
>[drm:intel_choose_pipe_bpp_dither], clamping display bpc (was -1) to EDID reported max of 10
>[drm:intel_choose_pipe_bpp_dither], setting pipe bpc to 8 (max display bpc 8)
>[drm:ironlake_crtc_mode_set], Mode for pipe 0:
>[drm:drm_mode_debug_printmodeline], Modeline 27:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:ironlake_update_plane], Writing base 00064000 00000000 0 0 4096
>[drm:intel_update_fbc], 
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 5, cursor: 6
>[drm:ironlake_check_srwm], watermark 1: display plane 7, fbc lines 3, cursor 6
>[drm:ironlake_check_srwm], watermark 2: display plane 37, fbc lines 3, cursor 6
>[drm:ironlake_check_srwm], watermark 3: display plane 66, fbc lines 4, cursor 6
>[drm:drm_crtc_helper_set_mode], [ENCODER:16:TMDS-16] set [MODE:27:1024x768]
>[drm:intel_dp_mode_set], Enabling DP audio on pipe A
>[drm:intel_write_eld], ELD on [CONNECTOR:15:DP-1], [ENCODER:16:TMDS-16]
>[drm:ironlake_write_eld], ELD on pipe A
>[drm:ironlake_write_eld], Audio directed to unknown port
>[drm:ironlake_write_eld], ELD: DisplayPort detected
>[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 5, cursor: 6
>[drm:ironlake_check_srwm], watermark 1: display plane 7, fbc lines 3, cursor 6
>[drm:ironlake_check_srwm], watermark 2: display plane 37, fbc lines 3, cursor 6
>[drm:ironlake_check_srwm], watermark 3: display plane 66, fbc lines 4, cursor 6
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:ivb_manual_fdi_link_train], FDI_RX_IIR 0x100
>[drm:ivb_manual_fdi_link_train], FDI train 1 done.
>[drm:ivb_manual_fdi_link_train], FDI_RX_IIR 0x600
>[drm:ivb_manual_fdi_link_train], FDI train 2 done.
>[drm:ivb_manual_fdi_link_train], FDI train done.
>[drm:intel_update_fbc], 
>[drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000
>[drm:intel_dp_start_link_train], clock recovery OK
>[drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
>[drm:drm_crtc_helper_set_config], 	[CONNECTOR:15:DP-1] set DPMS on
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:5] [FB:25] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], crtc has no fb, full mode set
>[drm:drm_crtc_helper_set_config], modes are different, full mode set
>[drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[drm:drm_mode_debug_printmodeline], Modeline 29:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[drm:drm_crtc_helper_set_config], encoder changed, full mode switch
>[drm:drm_crtc_helper_set_config], [CONNECTOR:15:DP-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], crtc changed, full mode switch
>[drm:drm_crtc_helper_set_config], [CONNECTOR:21:DP-2] to [CRTC:5]
>[drm:drm_crtc_helper_set_config], attempting to set mode from userspace
>[drm:drm_mode_debug_printmodeline], Modeline 29:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[drm:intel_dp_mode_fixup], Display port link bw 0a lane count 1 clock 270000
>[drm:drm_crtc_helper_set_mode], [CRTC:5]
>[drm:intel_choose_pipe_bpp_dither], clamping display bpc (was -1) to EDID reported max of 10
>[drm:intel_choose_pipe_bpp_dither], setting pipe bpc to 8 (max display bpc 8)
>[drm:ironlake_crtc_mode_set], Mode for pipe 1:
>[drm:drm_mode_debug_printmodeline], Modeline 29:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[drm:intel_prepare_page_flip], preparing flip with no unpin work?
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:ironlake_update_plane], Writing base 00064000 00000000 0 0 4096
>[drm:intel_update_fbc], 
>[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 5, cursor: 6
>[drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 5, cursor: 6
>[drm:drm_crtc_helper_set_mode], [ENCODER:22:TMDS-22] set [MODE:29:1024x768]
>[drm:intel_dp_mode_set], Enabling DP audio on pipe B
>[drm:intel_write_eld], ELD on [CONNECTOR:21:DP-2], [ENCODER:22:TMDS-22]
>[drm:ironlake_write_eld], ELD on pipe B
>[drm:ironlake_write_eld], Audio directed to unknown port
>[drm:ironlake_write_eld], ELD: DisplayPort detected
>[drm:ironlake_write_eld], ELD size 9
>[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 5, cursor: 6
>[drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 5, cursor: 6
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:ivb_manual_fdi_link_train], FDI_RX_IIR 0x100
>[drm:ivb_manual_fdi_link_train], FDI train 1 done.
>[drm:ivb_manual_fdi_link_train], FDI_RX_IIR 0x600
>[drm:ivb_manual_fdi_link_train], FDI train 2 done.
>[drm:ivb_manual_fdi_link_train], FDI train done.
>[drm:intel_prepare_page_flip], preparing flip with no unpin work?
>[drm:intel_update_fbc], 
>[drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000
>[drm:intel_dp_start_link_train], training pattern 1 signal levels 02800000
>[drm:intel_dp_start_link_train], clock recovery OK
>[drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
>[drm:drm_crtc_helper_set_config], 	[CONNECTOR:21:DP-2] set DPMS on
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:7] [NOFB]
>[drm:pch_irq_handler] *ERROR* PCH poison interrupt
>[drm:i915_hotplug_work_func], running encoder hotplug functions
>[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0x3f40010, result 1
>[drm:intel_crt_detect], CRT detected via hotplug
>[drm:output_poll_execute], [CONNECTOR:9:VGA-1] status updated from 2 to 1
>[drm:output_poll_execute], [CONNECTOR:12:HDMI-A-1] status updated from 2 to 2
>[drm:intel_dp_detect], DPCD: 110a840101000100
>[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[drm:drm_detect_monitor_audio], Monitor has basic audio support
>[drm:output_poll_execute], [CONNECTOR:15:DP-1] status updated from 1 to 1
>[drm:output_poll_execute], [CONNECTOR:18:HDMI-A-2] status updated from 2 to 2
>[drm:output_poll_execute], [CONNECTOR:20:HDMI-A-3] status updated from 2 to 2
>[drm:intel_dp_detect], DPCD: 110a840101000000
>[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[drm:drm_detect_monitor_audio], Monitor has basic audio support
>[drm:output_poll_execute], [CONNECTOR:21:DP-2] status updated from 1 to 1
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_detect], DPCD: 0000000000000000
>[drm:output_poll_execute], [CONNECTOR:23:DP-3] status updated from 2 to 2
>[drm:drm_fb_helper_hotplug_event], 
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1]
>[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0x3f40010, result 1
>[drm:intel_crt_detect], CRT detected via hotplug
>[drm:drm_edid_to_eld], ELD: no CEA Extension found
>[drm:drm_mode_debug_printmodeline], Modeline 73:"1152x864" 0 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
>[drm:drm_mode_prune_invalid], Not using 1152x864 mode 12
>[drm:drm_mode_debug_printmodeline], Modeline 65:"1280x1024" 0 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_mode_prune_invalid], Not using 1280x1024 mode 12
>[drm:drm_mode_debug_printmodeline], Modeline 54:"1440x900" 0 136750 1440 1536 1688 1936 900 903 909 942 0x40 0x6
>[drm:drm_mode_prune_invalid], Not using 1440x900 mode 12
>[drm:drm_mode_debug_printmodeline], Modeline 48:"1440x900" 0 106500 1440 1520 1672 1904 900 903 909 934 0x40 0x6
>[drm:drm_mode_prune_invalid], Not using 1440x900 mode 12
>[drm:drm_mode_debug_printmodeline], Modeline 36:"1280x800" 0 106500 1280 1360 1488 1696 800 803 809 838 0x40 0x6
>[drm:drm_mode_prune_invalid], Not using 1280x800 mode 12
>[drm:drm_mode_debug_printmodeline], Modeline 35:"1280x800" 0 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x9
>[drm:drm_mode_prune_invalid], Not using 1280x800 mode 12
>[drm:drm_mode_debug_printmodeline], Modeline 33:"1280x960" 0 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
>[drm:drm_mode_prune_invalid], Not using 1280x960 mode 12
>[drm:drm_mode_debug_printmodeline], Modeline 32:"1280x1024" 0 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_mode_prune_invalid], Not using 1280x1024 mode 12
>[drm:drm_mode_debug_printmodeline], Modeline 31:"1680x1050" 0 119000 1680 1728 1760 1840 1050 1053 1059 1080 0x48 0x9
>[drm:drm_mode_prune_invalid], Not using 1680x1050 mode 12
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] probed modes :
>[drm:drm_mode_debug_printmodeline], Modeline 66:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 67:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 68:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 70:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 72:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 71:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 55:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 57:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 60:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 58:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 61:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 63:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 64:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] disconnected
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:DP-1]
>[drm:intel_dp_detect], DPCD: 110a840101000100
>[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[drm:drm_detect_monitor_audio], Monitor has basic audio support
>[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[drm:drm_edid_to_eld], ELD monitor DELL U3011
>[drm:drm_edid_to_eld], ELD size 9, SAD count 1
>[drm:drm_mode_debug_printmodeline], Modeline 98:"1920x1080" 0 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x5
>[drm:drm_mode_prune_invalid], Not using 1920x1080 mode 12
>[drm:drm_mode_debug_printmodeline], Modeline 97:"1920x1080" 0 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5
>[drm:drm_mode_prune_invalid], Not using 1920x1080 mode 12
>[drm:drm_mode_debug_printmodeline], Modeline 96:"1920x1080" 0 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x40 0x15
>[drm:drm_mode_prune_invalid], Not using 1920x1080 mode 12
>[drm:drm_mode_debug_printmodeline], Modeline 95:"1280x720" 0 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5
>[drm:drm_mode_prune_invalid], Not using 1280x720 mode 11
>[drm:drm_mode_debug_printmodeline], Modeline 94:"1440x576" 0 27000 1440 1464 1590 1728 576 580 586 625 0x40 0x1a
>[drm:drm_mode_prune_invalid], Not using 1440x576 mode 11
>[drm:drm_mode_debug_printmodeline], Modeline 91:"1440x480" 0 27000 1440 1478 1602 1716 480 488 494 525 0x40 0x1a
>[drm:drm_mode_prune_invalid], Not using 1440x480 mode 11
>[drm:drm_mode_debug_printmodeline], Modeline 85:"1280x720" 0 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
>[drm:drm_mode_prune_invalid], Not using 1280x720 mode 11
>[drm:drm_mode_debug_printmodeline], Modeline 84:"1920x1080" 0 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15
>[drm:drm_mode_prune_invalid], Not using 1920x1080 mode 12
>[drm:drm_mode_debug_printmodeline], Modeline 83:"1920x1080" 0 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
>[drm:drm_mode_prune_invalid], Not using 1920x1080 mode 12
>[drm:drm_mode_debug_printmodeline], Modeline 79:"1280x1024" 0 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_mode_prune_invalid], Not using 1280x1024 mode 12
>[drm:drm_mode_debug_printmodeline], Modeline 74:"1920x1440" 0 234000 1920 2048 2256 2600 1440 1441 1444 1500 0x40 0x6
>[drm:drm_mode_prune_invalid], Not using 1920x1440 mode 12
>[drm:drm_mode_debug_printmodeline], Modeline 73:"1920x1200" 0 193250 1920 2056 2256 2592 1200 1203 1209 1245 0x40 0x6
>[drm:drm_mode_prune_invalid], Not using 1920x1200 mode 12
>[drm:drm_mode_debug_printmodeline], Modeline 65:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
>[drm:drm_mode_prune_invalid], Not using 1600x1200 mode 12
>[drm:drm_mode_debug_printmodeline], Modeline 54:"1280x1024" 0 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_mode_prune_invalid], Not using 1280x1024 mode 12
>[drm:drm_mode_debug_printmodeline], Modeline 48:"1280x800" 0 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x9
>[drm:drm_mode_prune_invalid], Not using 1280x800 mode 12
>[drm:drm_mode_debug_printmodeline], Modeline 36:"1152x864" 0 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
>[drm:drm_mode_prune_invalid], Not using 1152x864 mode 12
>[drm:drm_mode_debug_printmodeline], Modeline 31:"2560x1600" 0 268500 2560 2608 2640 2720 1600 1603 1609 1646 0x48 0x9
>[drm:drm_mode_prune_invalid], Not using 2560x1600 mode 12
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:DP-1] probed modes :
>[drm:drm_mode_debug_printmodeline], Modeline 43:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 44:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 45:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 38:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 56:"720x576" 50 27000 720 732 796 864 576 581 586 625 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 50:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 39:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 40:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 53:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 41:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] disconnected
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-3]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-3] disconnected
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-2]
>[drm:intel_dp_detect], DPCD: 110a840101000000
>[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[drm:drm_detect_monitor_audio], Monitor has basic audio support
>[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[drm:drm_edid_to_eld], ELD monitor DELL U2410
>[drm:drm_edid_to_eld], ELD size 9, SAD count 1
>[drm:drm_mode_debug_printmodeline], Modeline 95:"1440x480" 0 27000 1440 1478 1602 1716 480 488 494 525 0x40 0x1a
>[drm:drm_mode_prune_invalid], Not using 1440x480 mode 11
>[drm:drm_mode_debug_printmodeline], Modeline 93:"1440x576" 0 27000 1440 1464 1590 1728 576 580 586 625 0x40 0x1a
>[drm:drm_mode_prune_invalid], Not using 1440x576 mode 11
>[drm:drm_mode_debug_printmodeline], Modeline 92:"1920x1080" 0 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x5
>[drm:drm_mode_prune_invalid], Not using 1920x1080 mode 12
>[drm:drm_mode_debug_printmodeline], Modeline 91:"1920x1080" 0 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x40 0x15
>[drm:drm_mode_prune_invalid], Not using 1920x1080 mode 12
>[drm:drm_mode_debug_printmodeline], Modeline 90:"1280x720" 0 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5
>[drm:drm_mode_prune_invalid], Not using 1280x720 mode 11
>[drm:drm_mode_debug_printmodeline], Modeline 88:"1920x1080" 0 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5
>[drm:drm_mode_prune_invalid], Not using 1920x1080 mode 12
>[drm:drm_mode_debug_printmodeline], Modeline 82:"1280x720" 0 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
>[drm:drm_mode_prune_invalid], Not using 1280x720 mode 11
>[drm:drm_mode_debug_printmodeline], Modeline 81:"1920x1080" 0 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15
>[drm:drm_mode_prune_invalid], Not using 1920x1080 mode 12
>[drm:drm_mode_debug_printmodeline], Modeline 80:"1920x1080" 0 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
>[drm:drm_mode_prune_invalid], Not using 1920x1080 mode 12
>[drm:drm_mode_debug_printmodeline], Modeline 76:"1280x1024" 0 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_mode_prune_invalid], Not using 1280x1024 mode 12
>[drm:drm_mode_debug_printmodeline], Modeline 54:"1152x864" 0 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
>[drm:drm_mode_prune_invalid], Not using 1152x864 mode 12
>[drm:drm_mode_debug_printmodeline], Modeline 48:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
>[drm:drm_mode_prune_invalid], Not using 1600x1200 mode 12
>[drm:drm_mode_debug_printmodeline], Modeline 36:"1280x1024" 0 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_mode_prune_invalid], Not using 1280x1024 mode 12
>[drm:drm_mode_debug_printmodeline], Modeline 31:"1920x1200" 0 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
>[drm:drm_mode_prune_invalid], Not using 1920x1200 mode 12
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-2] probed modes :
>[drm:drm_mode_debug_printmodeline], Modeline 49:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 51:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 52:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 37:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 69:"720x576" 50 27000 720 732 796 864 576 581 586 625 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 59:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 42:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 46:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 62:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 47:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-3]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_detect], DPCD: 0000000000000000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-3] disconnected
>[drm:drm_setup_crtcs], 
>[drm:drm_enable_connectors], connector 9 enabled? yes
>[drm:drm_enable_connectors], connector 12 enabled? no
>[drm:drm_enable_connectors], connector 15 enabled? yes
>[drm:drm_enable_connectors], connector 18 enabled? no
>[drm:drm_enable_connectors], connector 20 enabled? no
>[drm:drm_enable_connectors], connector 21 enabled? yes
>[drm:drm_enable_connectors], connector 23 enabled? no
>[drm:drm_target_preferred], looking for cmdline mode on connector 9
>[drm:drm_target_preferred], looking for preferred mode on connector 9
>[drm:drm_target_preferred], found mode 1024x768
>[drm:drm_target_preferred], looking for cmdline mode on connector 15
>[drm:drm_target_preferred], looking for preferred mode on connector 15
>[drm:drm_target_preferred], found mode 1024x768
>[drm:drm_target_preferred], looking for cmdline mode on connector 21
>[drm:drm_target_preferred], looking for preferred mode on connector 21
>[drm:drm_target_preferred], found mode 1024x768
>[drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config
>[drm:drm_setup_crtcs], desired mode 1024x768 set on crtc 3
>[drm:drm_setup_crtcs], desired mode 1024x768 set on crtc 5
>[drm:drm_setup_crtcs], desired mode 1024x768 set on crtc 7
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:25] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], encoder changed, full mode switch
>[drm:drm_crtc_helper_set_config], crtc changed, full mode switch
>[drm:drm_crtc_helper_set_config], [CONNECTOR:9:VGA-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:15:DP-1] to [NOCRTC]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:21:DP-2] to [NOCRTC]
>[drm:drm_crtc_helper_set_config], attempting to set mode from userspace
>[drm:drm_mode_debug_printmodeline], Modeline 27:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[drm:drm_crtc_helper_set_mode], [CRTC:3]
>[drm:intel_dp_link_down], 
>[drm:intel_dp_link_down], 
>[drm:intel_prepare_page_flip], preparing flip with no unpin work?
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 5, cursor: 6
>[drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 5, cursor: 6
>[drm:intel_update_fbc], 
>[drm:intel_choose_pipe_bpp_dither], setting pipe bpc to 8 (max display bpc 8)
>[drm:ironlake_crtc_mode_set], Mode for pipe 0:
>[drm:drm_mode_debug_printmodeline], Modeline 27:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:ironlake_update_plane], Writing base 00064000 00000000 0 0 4096
>[drm:intel_update_fbc], 
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 5, cursor: 6
>[drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 5, cursor: 6
>[drm:drm_crtc_helper_set_mode], [ENCODER:10:DAC-10] set [MODE:27:1024x768]
>[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 5, cursor: 6
>[drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 5, cursor: 6
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:ivb_manual_fdi_link_train], FDI_RX_IIR 0x100
>[drm:ivb_manual_fdi_link_train], FDI train 1 done.
>[drm:ivb_manual_fdi_link_train], FDI_RX_IIR 0x600
>[drm:ivb_manual_fdi_link_train], FDI train 2 done.
>[drm:ivb_manual_fdi_link_train], FDI train done.
>[drm:intel_update_fbc], 
>[drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
>[drm:drm_crtc_helper_set_config], 	[CONNECTOR:9:VGA-1] set DPMS on
>[drm:ironlake_crtc_dpms], crtc 1/1 dpms off
>[drm:i915_get_vblank_timestamp], crtc 1 is disabled
>[drm:intel_prepare_page_flip], preparing flip with no unpin work?
>[drm:intel_prepare_page_flip], preparing flip with no unpin work?
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 5, cursor: 6
>[drm:ironlake_check_srwm], watermark 1: display plane 7, fbc lines 3, cursor 6
>[drm:ironlake_check_srwm], watermark 2: display plane 37, fbc lines 3, cursor 6
>[drm:ironlake_check_srwm], watermark 3: display plane 66, fbc lines 4, cursor 6
>[drm:intel_update_fbc], 
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:5] [FB:25] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], crtc has no fb, full mode set
>[drm:drm_crtc_helper_set_config], [CONNECTOR:9:VGA-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], crtc changed, full mode switch
>[drm:drm_crtc_helper_set_config], [CONNECTOR:15:DP-1] to [CRTC:5]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:21:DP-2] to [NOCRTC]
>[drm:drm_crtc_helper_set_config], attempting to set mode from userspace
>[drm:drm_mode_debug_printmodeline], Modeline 29:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[drm:intel_dp_mode_fixup], Display port link bw 0a lane count 1 clock 270000
>[drm:drm_crtc_helper_set_mode], [CRTC:5]
>[drm:intel_choose_pipe_bpp_dither], clamping display bpc (was -1) to EDID reported max of 10
>[drm:intel_choose_pipe_bpp_dither], setting pipe bpc to 8 (max display bpc 8)
>[drm:ironlake_crtc_mode_set], Mode for pipe 1:
>[drm:drm_mode_debug_printmodeline], Modeline 29:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:ironlake_update_plane], Writing base 00064000 00000000 0 0 4096
>[drm:intel_update_fbc], 
>[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 5, cursor: 6
>[drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 5, cursor: 6
>[drm:drm_crtc_helper_set_mode], [ENCODER:16:TMDS-16] set [MODE:29:1024x768]
>[drm:intel_dp_mode_set], Enabling DP audio on pipe B
>[drm:intel_write_eld], ELD on [CONNECTOR:15:DP-1], [ENCODER:16:TMDS-16]
>[drm:ironlake_write_eld], ELD on pipe B
>[drm:ironlake_write_eld], Audio directed to unknown port
>[drm:ironlake_write_eld], ELD: DisplayPort detected
>[drm:ironlake_write_eld], ELD size 9
>[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 5, cursor: 6
>[drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 5, cursor: 6
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:ivb_manual_fdi_link_train], FDI_RX_IIR 0x100
>[drm:ivb_manual_fdi_link_train], FDI train 1 done.
>[drm:ivb_manual_fdi_link_train], FDI_RX_IIR 0x600
>[drm:ivb_manual_fdi_link_train], FDI train 2 done.
>[drm:ivb_manual_fdi_link_train], FDI train done.
>[drm:intel_update_fbc], 
>[drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000
>[drm:intel_dp_start_link_train], clock recovery OK
>[drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
>[drm:drm_crtc_helper_set_config], 	[CONNECTOR:15:DP-1] set DPMS on
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:7] [FB:25] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], crtc has no fb, full mode set
>[drm:drm_crtc_helper_set_config], modes are different, full mode set
>[drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[drm:drm_mode_debug_printmodeline], Modeline 31:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[drm:drm_crtc_helper_set_config], [CONNECTOR:9:VGA-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:15:DP-1] to [CRTC:5]
>[drm:drm_crtc_helper_set_config], crtc changed, full mode switch
>[drm:drm_crtc_helper_set_config], [CONNECTOR:21:DP-2] to [CRTC:7]
>[drm:drm_crtc_helper_set_config], attempting to set mode from userspace
>[drm:drm_mode_debug_printmodeline], Modeline 31:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[drm:intel_dp_mode_fixup], Display port link bw 0a lane count 1 clock 270000
>[drm:drm_crtc_helper_set_mode], [CRTC:7]
>[drm:intel_choose_pipe_bpp_dither], clamping display bpc (was -1) to EDID reported max of 10
>[drm:intel_choose_pipe_bpp_dither], setting pipe bpc to 8 (max display bpc 8)
>[drm:ironlake_crtc_mode_set], Mode for pipe 2:
>[drm:drm_mode_debug_printmodeline], Modeline 31:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[drm:ironlake_crtc_mode_set], using pipe b dpll
>[drm:intel_prepare_page_flip], preparing flip with no unpin work?
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:ironlake_update_plane], Writing base 00064000 00000000 0 0 4096
>[drm:intel_update_fbc], 
>[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 5, cursor: 6
>[drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 5, cursor: 6
>[drm:sandybridge_update_wm], FIFO watermarks For pipe C - plane 5, cursor: 6
>[drm:drm_crtc_helper_set_mode], [ENCODER:22:TMDS-22] set [MODE:31:1024x768]
>[drm:intel_dp_mode_set], Enabling DP audio on pipe C
>[drm:intel_write_eld], ELD on [CONNECTOR:21:DP-2], [ENCODER:22:TMDS-22]
>[drm:ironlake_write_eld], ELD on pipe C
>[drm:ironlake_write_eld], Audio directed to unknown port
>[drm:ironlake_write_eld], ELD: DisplayPort detected
>[drm:ironlake_write_eld], ELD size 9
>[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 5, cursor: 6
>[drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 5, cursor: 6
>[drm:sandybridge_update_wm], FIFO watermarks For pipe C - plane 5, cursor: 6
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:ivb_manual_fdi_link_train], FDI_RX_IIR 0x100
>[drm:ivb_manual_fdi_link_train], FDI train 1 done.
>[drm:ivb_manual_fdi_link_train], FDI_RX_IIR 0x200
>[drm:ivb_manual_fdi_link_train], FDI train 2 done.
>[drm:ivb_manual_fdi_link_train], FDI train done.
>[drm:intel_update_fbc], 
>[drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000
>[drm:intel_dp_start_link_train], training pattern 1 signal levels 02800000
>[drm:intel_dp_start_link_train], clock recovery OK
>[drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
>[drm:drm_crtc_helper_set_config], 	[CONNECTOR:21:DP-2] set DPMS on
>[drm:i915_driver_open], 
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:25] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:9:VGA-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:15:DP-1] to [CRTC:5]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:21:DP-2] to [CRTC:7]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:5] [FB:25] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:9:VGA-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:15:DP-1] to [CRTC:5]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:21:DP-2] to [CRTC:7]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:7] [FB:25] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:9:VGA-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:15:DP-1] to [CRTC:5]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:21:DP-2] to [CRTC:7]
>[drm:i915_driver_open], 
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:25] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:9:VGA-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:15:DP-1] to [CRTC:5]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:21:DP-2] to [CRTC:7]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:5] [FB:25] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:9:VGA-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:15:DP-1] to [CRTC:5]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:21:DP-2] to [CRTC:7]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:7] [FB:25] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:9:VGA-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:15:DP-1] to [CRTC:5]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:21:DP-2] to [CRTC:7]
>[drm:i915_driver_open], 
>[drm:drm_mode_getresources], CRTC[3] CONNECTORS[7] ENCODERS[7]
>[drm:drm_mode_getresources], CRTC[3] CONNECTORS[7] ENCODERS[7]
>[drm:drm_mode_getconnector], [CONNECTOR:9:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1]
>[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0x83f40018, result 1
>[drm:intel_crt_detect], CRT detected via hotplug
>[drm:drm_edid_to_eld], ELD: no CEA Extension found
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] probed modes :
>[drm:drm_mode_debug_printmodeline], Modeline 32:"1680x1050" 60 119000 1680 1728 1760 1840 1050 1053 1059 1080 0x48 0x9
>[drm:drm_mode_debug_printmodeline], Modeline 80:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 33:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 65:"1440x900" 75 136750 1440 1536 1688 1936 900 903 909 942 0x40 0x6
>[drm:drm_mode_debug_printmodeline], Modeline 54:"1440x900" 60 106500 1440 1520 1672 1904 900 903 909 934 0x40 0x6
>[drm:drm_mode_debug_printmodeline], Modeline 34:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 48:"1280x800" 75 106500 1280 1360 1488 1696 800 803 809 838 0x40 0x6
>[drm:drm_mode_debug_printmodeline], Modeline 36:"1280x800" 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x9
>[drm:drm_mode_debug_printmodeline], Modeline 87:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 66:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 67:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 68:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 70:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 72:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 71:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 55:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 57:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 60:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 58:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 61:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 63:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 64:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[drm:drm_mode_getconnector], [CONNECTOR:9:?]
>[drm:drm_mode_getconnector], [CONNECTOR:12:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:12:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:15:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:DP-1]
>[drm:intel_dp_detect], DPCD: 110a840101000100
>[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[drm:drm_detect_monitor_audio], Monitor has basic audio support
>[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[drm:drm_edid_to_eld], ELD monitor DELL U3011
>[drm:drm_edid_to_eld], ELD size 9, SAD count 1
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:DP-1] probed modes :
>[drm:drm_mode_debug_printmodeline], Modeline 35:"2560x1600" 60 268500 2560 2608 2640 2720 1600 1603 1609 1646 0x48 0x9
>[drm:drm_mode_debug_printmodeline], Modeline 83:"1920x1440" 60 234000 1920 2048 2256 2600 1440 1441 1444 1500 0x40 0x6
>[drm:drm_mode_debug_printmodeline], Modeline 82:"1920x1200" 60 193250 1920 2056 2256 2592 1200 1203 1209 1245 0x40 0x6
>[drm:drm_mode_debug_printmodeline], Modeline 107:"1920x1080" 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 93:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 108:"1920x1080" 24 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 106:"1920x1080" 50 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x40 0x15
>[drm:drm_mode_debug_printmodeline], Modeline 94:"1920x1080" 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15
>[drm:drm_mode_debug_printmodeline], Modeline 81:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 89:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 79:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 78:"1280x800" 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x9
>[drm:drm_mode_debug_printmodeline], Modeline 77:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 105:"1280x720" 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 95:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 104:"1440x576" 50 27000 1440 1464 1590 1728 576 580 586 625 0x40 0x1a
>[drm:drm_mode_debug_printmodeline], Modeline 43:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 44:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 101:"1440x480" 60 27000 1440 1478 1602 1716 480 488 494 525 0x40 0x1a
>[drm:drm_mode_debug_printmodeline], Modeline 45:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 38:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 56:"720x576" 50 27000 720 732 796 864 576 581 586 625 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 50:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 39:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 40:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 53:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 41:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[drm:drm_mode_getconnector], [CONNECTOR:15:?]
>[drm:drm_mode_getconnector], [CONNECTOR:18:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:18:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:20:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-3]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-3] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:20:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-3]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-3] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:21:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-2]
>[drm:intel_dp_detect], DPCD: 110a840101000000
>[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[drm:drm_detect_monitor_audio], Monitor has basic audio support
>[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[drm:drm_edid_to_eld], ELD monitor DELL U2410
>[drm:drm_edid_to_eld], ELD size 9, SAD count 1
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-2] probed modes :
>[drm:drm_mode_debug_printmodeline], Modeline 73:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
>[drm:drm_mode_debug_printmodeline], Modeline 115:"1920x1080" 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 102:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 119:"1920x1080" 24 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 118:"1920x1080" 50 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x40 0x15
>[drm:drm_mode_debug_printmodeline], Modeline 103:"1920x1080" 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15
>[drm:drm_mode_debug_printmodeline], Modeline 86:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 97:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 85:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 88:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 117:"1280x720" 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 109:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 120:"1440x576" 50 27000 1440 1464 1590 1728 576 580 586 625 0x40 0x1a
>[drm:drm_mode_debug_printmodeline], Modeline 49:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 51:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 122:"1440x480" 60 27000 1440 1478 1602 1716 480 488 494 525 0x40 0x1a
>[drm:drm_mode_debug_printmodeline], Modeline 52:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 37:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 69:"720x576" 50 27000 720 732 796 864 576 581 586 625 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 59:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 42:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 46:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 62:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 47:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[drm:drm_mode_getconnector], [CONNECTOR:21:?]
>[drm:drm_mode_getconnector], [CONNECTOR:23:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-3]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_detect], DPCD: 0000000000000000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-3] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:23:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-3]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_detect], DPCD: 0000000000000000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-3] disconnected
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:25] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:9:VGA-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:15:DP-1] to [CRTC:5]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:21:DP-2] to [CRTC:7]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:5] [FB:25] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:9:VGA-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:15:DP-1] to [CRTC:5]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:21:DP-2] to [CRTC:7]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:7] [FB:25] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:9:VGA-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:15:DP-1] to [CRTC:5]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:21:DP-2] to [CRTC:7]
>[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0x83f40018, result 1
>[drm:intel_crt_detect], CRT detected via hotplug
>[drm:output_poll_execute], [CONNECTOR:9:VGA-1] status updated from 1 to 1
>[drm:output_poll_execute], [CONNECTOR:12:HDMI-A-1] status updated from 2 to 2
>[drm:intel_dp_detect], DPCD: 110a840101000100
>[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[drm:drm_detect_monitor_audio], Monitor has basic audio support
>[drm:output_poll_execute], [CONNECTOR:15:DP-1] status updated from 1 to 1
>[drm:output_poll_execute], [CONNECTOR:18:HDMI-A-2] status updated from 2 to 2
>[drm:output_poll_execute], [CONNECTOR:20:HDMI-A-3] status updated from 2 to 2
>[drm:intel_dp_detect], DPCD: 110a840101000000
>[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[drm:drm_detect_monitor_audio], Monitor has basic audio support
>[drm:output_poll_execute], [CONNECTOR:21:DP-2] status updated from 1 to 1
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_detect], DPCD: 0000000000000000
>[drm:output_poll_execute], [CONNECTOR:23:DP-3] status updated from 2 to 2

Actions: View

Attachments on bug 45867: 56847 | 56848 | 58019

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.