Attachment 8212 Details for Bug 9446 – dmesg of my system

dmesg of my system

dmesg (text/plain), 15.03 KB, created by Cyrill Helg on 2006-12-25 11:35:16 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Cyrill Helg

Created: 2006-12-25 11:35:16 UTC

Size: 15.03 KB

patch

obsolete

>window: disabled.
>PCI: Bridge: 0000:00:1c.2
>  IO window: 4000-4fff
>  MEM window: a8300000-a83fffff
>  PREFETCH window: c8000000-c80fffff
>PCI: Bus 5, cardbus bridge: 0000:04:00.0
>  IO window: 00005000-000050ff
>  IO window: 00005400-000054ff
>  PREFETCH window: d0000000-d1ffffff
>  MEM window: aa000000-abffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: 5000-8fff
>  MEM window: a8400000-b7ffffff
>  PREFETCH window: d0000000-d7ffffff
>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 20 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 22 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>NET: Registered protocol family 2
>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
>TCP established hash table entries: 16384 (order: 4, 65536 bytes)
>TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
>TCP: Hash tables configured (established 16384 bind 8192)
>TCP reno registered
>Simple Boot Flag at 0x35 set to 0x1
>Machine check exception polling timer started.
>squashfs: version 3.1 (2006/08/19) Phillip Lougher
>Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>NTFS driver 2.1.27 [Flags: R/O].
>SGI XFS with large block numbers, no debug enabled
>Registering unionfs 1.5pre-cvs200611080310
>unionfs: debugging is not enabled
>io scheduler noop registered
>io scheduler cfq registered (default)
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:01.0:pcie00]
>Allocate Port Service[0000:00:01.0:pcie03]
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>Allocate Port Service[0000:00:1c.0:pcie03]
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.2:pcie00]
>Allocate Port Service[0000:00:1c.2:pcie02]
>Allocate Port Service[0000:00:1c.2:pcie03]
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>vesafb: ATI Technologies Inc., CP24, 01.00 (OEM: ATI MOBILITY RADEON X600   )
>vesafb: VBE version: 2.0
>vesafb: protected mode interface info at c000:5b55
>vesafb: pmi: set display start = c00c5bc3, set palette = c00c5bfd
>vesafb: pmi: ports = 3010 3016 3054 3038 303c 305c 3000 3004 30b0 30b2 30b4 
>vesafb: no monitor limits have been set
>vesafb: scrolling: redraw
>Console: switching to colour frame buffer device 128x48
>vesafb: framebuffer at 0xc0000000, mapped to 0xdc880000, using 6144k, total 65472k
>fb0: VESA VGA frame buffer device
>ACPI: AC Adapter [AC] (on-line)
>ACPI: Battery Slot [BAT0] (battery present)
>ACPI: Power Button (FF) [PWRF]
>ACPI: Lid Switch [LID]
>ACPI: Sleep Button (CM) [SLPB]
>ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: Processor [CPU] (supports 8 throttling states)
>ACPI: Thermal Zone [THM0] (59 C)
>ibm_acpi: IBM ThinkPad ACPI Extras v0.12a
>ibm_acpi: http://ibm-acpi.sf.net/
>loop: loaded (max 8 devices)
>tg3.c:v3.69 (November 15, 2006)
>ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:02:00.0 to 64
>eth0: Tigon3 [partno(BCM95751M) rev 4101 PHY(5750)] (PCI Express) 10/100/1000BaseT Ethernet 00:01:6c:ca:c6:d6
>eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1] 
>eth0: dma_rwctrl[76180000] dma_mask[64-bit]
>PPP generic driver version 2.4.2
>tun: Universal TUN/TAP device driver, 1.6
>tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
>ahci 0000:00:1f.2: version 2.0
>ahci: probe of 0000:00:1f.2 failed with error -12
>ata_piix 0000:00:1f.2: version 2.00ac6
>ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0x18C0 irq 14
>ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18C8 irq 15
>scsi0 : ata_piix
>ata1.00: ATA-6, max UDMA/100, 117210240 sectors: LBA 
>ata1.00: ata1: dev 0 multi count 16
>ata1.00: applying bridge limits
>ata1.00: configured for UDMA/100
>scsi1 : ata_piix
>ata2.00: ATAPI, max UDMA/33
>ata2.00: configured for UDMA/33
>scsi 0:0:0:0: Direct-Access     ATA      FUJITSU MHV2060A 0084 PQ: 0 ANSI: 5
>SCSI device sda: 117210240 512-byte hdwr sectors (60012 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: drive cache: write back
>SCSI device sda: 117210240 512-byte hdwr sectors (60012 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: drive cache: write back
> sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 >
>sd 0:0:0:0: Attached scsi disk sda
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>scsi 1:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ-822S  1.61 PQ: 0 ANSI: 5
>sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>sr 1:0:0:0: Attached scsi generic sg1 type 5
>Yenta: CardBus bridge found at 0000:04:00.0 [1014:056c]
>Yenta: ISA IRQ mask 0x04b8, PCI irq 16
>Socket status: 30000006
>pcmcia: parent PCI bridge I/O window: 0x5000 - 0x8fff
>pcmcia: parent PCI bridge Memory window: 0xa8400000 - 0xb7ffffff
>pcmcia: parent PCI bridge Memory window: 0xd0000000 - 0xd7ffffff
>usbmon: debugfs is not available
>ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 21, io mem 0xa8000000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001800
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001820
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.2: irq 20, io base 0x00001840
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.3: irq 21, io base 0x00001860
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>usb 4-2: new full speed USB device using uhci_hcd and address 2
>usb 4-2: configuration #1 chosen from 1 choice
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>pnp: the driver 'i8042 kbd' has been registered
>pnp: match found with the PnP device '00:07' and the driver 'i8042 kbd'
>pnp: the driver 'i8042 aux' has been registered
>pnp: match found with the PnP device '00:08' and the driver 'i8042 aux'
>PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: PC Speaker as /class/input/input0
>i2c /dev entries driver
>ACPI: PCI Interrupt 0000:00:1f.3[A] -> GSI 23 (level, low) -> IRQ 22
>hdaps: initial mode latch is 0x01
>hdaps: setting ec_rate=250, filter_order=2
>hdaps: fake_data_mode set to 0
>hdaps: device successfully initialized.
>input: hdaps as /class/input/input1
>hdaps: driver successfully loaded.
>device-mapper: ioctl: 4.10.0-ioctl (2006-09-14) initialised: dm-devel@redhat.com
>thinkpad_ec: thinkpad_ec 0.30 loaded.
>tp_smapi 0.30 loading...
>tp_smapi successfully loaded (smapi_port=0xb2).
>Advanced Linux Sound Architecture Driver Version 1.0.13 (Tue Nov 28 14:07:24 2006 UTC).
>ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 22 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1e.2 to 64
>input: AT Translated Set 2 keyboard as /class/input/input2
>AC'97 0 analog subsections not ready
>Synaptics Touchpad, model: 1, fw: 5.9, id: 0x2c6ab1, caps: 0x884793/0x0
>serio: Synaptics pass-through port at isa0060/serio1/input0
>input: SynPS/2 Synaptics TouchPad as /class/input/input3
>intel8x0_measure_ac97_clock: measured 50992 usecs
>intel8x0: measured clock 215 rejected
>intel8x0: clocking to 48000
>ALSA device list:
>  #0: Intel ICH6 with AD1981B at 0xa8000800, irq 18
>IPv4 over IPv4 tunneling driver
>GRE over IPv4 tunneling driver
>ip_conntrack version 2.4 (3575 buckets, 28600 max) - 176 bytes per conntrack
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>NET: Registered protocol family 15
>Bridge firewalling registered
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>Bluetooth: HIDP (Human Interface Emulation) ver 1.1
>802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
>All bugs added by David S. Miller <davem@redhat.com>
>SCTP: Hash tables configured (established 16384 bind 32768)
>ieee80211: 802.11 data/management/control stack, git-1.1.13
>ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
>ieee80211_crypt: registered algorithm 'NULL'
>ieee80211_crypt: registered algorithm 'WEP'
>Using IPI Shortcut mode
>Suspend2 Core.
>Suspend2 Userspace UI Support module loaded.
>Suspend2 Checksumming module loaded.
>Suspend2 Userspace Storage Manager module loaded.
>Suspend2 Compressor module loaded.
>Suspend2 Encryptor module loaded.
>Time: tsc clocksource has been installed.
>Suspend2 Block I/O module loaded.
>Suspend2 Swap Allocator module loaded.
>ACPI: (supports S0 S3 S4 S5)
>Time: acpi_pm clocksource has been installed.
>IBM TrackPoint firmware: 0x0e, buttons: 3/3
>input: TPPS/2 IBM TrackPoint as /class/input/input4
>Replacing swsusp.
>Suspend2 2.2.9: SwapAllocator: Signature found.
>Suspend2 2.2.9: Resuming enabled.
>Suspend2 2.2.9: Normal swapspace found.
>Suspend2 2.2.9: No image found.
>EXT3-fs: INFO: recovery required on readonly filesystem.
>EXT3-fs: write access will be enabled during recovery.
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: recovery complete.
>EXT3-fs: mounted filesystem with ordered data mode.
>VFS: Mounted root (ext3 filesystem) readonly.
>Freeing unused kernel memory: 196k freed
>agpgart: Detected an Intel 915GM Chipset.
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
>agpgart: AGP aperture is 256M @ 0x0
>ACPI: PCI Interrupt 0000:00:1e.3[B] -> GSI 23 (level, low) -> IRQ 22
>ath_hal: module license 'Proprietary' taints kernel.
>ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
>wlan: 0.8.4.2 (0.9.2)
>ath_rate_sample: 1.2 (0.9.2)
>ath_pci: 0.9.4.5 (0.9.2)
>ACPI: PCI Interrupt 0000:04:02.0[A] -> GSI 21 (level, low) -> IRQ 23
>pnp: the driver 'serial' has been registered
>pnp: match found with the PnP device '00:09' and the driver 'serial'
>pnp: Res cnt 2
>pnp: res cnt 2
>pnp: Encode io
>pnp: Encode irq
>pnp: Device 00:09 activated.
>00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
>pnp: the driver 'nsc-ircc' has been registered
>pnp: match found with the PnP device '00:0b' and the driver 'nsc-ircc'
>nsc-ircc, chip->init
>nsc-ircc, Found chip at base=0x02e
>nsc-ircc, driver loaded (Dag Brattli)
>nsc_ircc_open(), can't get iobase of 0x2f8
>nsc-ircc, Found chip at base=0x02e
>nsc-ircc, driver loaded (Dag Brattli)
>nsc_ircc_open(), can't get iobase of 0x2f8
>pnp: Device 00:0b disabled.
>pnp: the driver 'nsc-ircc' has been unregistered
>wifi0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
>wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
>wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
>wifi0: H/W encryption support: WEP AES AES_CCM TKIP
>wifi0: mac 5.9 phy 4.3 radio 3.6
>wifi0: Use hw queue 1 for WME_AC_BE traffic
>wifi0: Use hw queue 0 for WME_AC_BK traffic
>wifi0: Use hw queue 2 for WME_AC_VI traffic
>wifi0: Use hw queue 3 for WME_AC_VO traffic
>wifi0: Use hw queue 8 for CAB traffic
>wifi0: Use hw queue 9 for beacons
>wifi0: Atheros 5212: mem=0xa8400000, irq=23
>EXT3 FS on sda6, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-2, internal journal
>EXT3-fs: mounted filesystem with journal data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-4, internal journal
>EXT3-fs: mounted filesystem with journal data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-0, internal journal
>EXT3-fs: mounted filesystem with journal data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-1, internal journal
>EXT3-fs: mounted filesystem with journal data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-3, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 755960k swap on /dev/sda7.  Priority:-1 extents:1 across:755960k
>Adding 907192k swap on /dev/sda3.  Priority:-2 extents:1 across:907192k
>[drm] Initialized drm 1.1.0 20060810
>PCI: Unable to reserve mem region #1:8000000@c0000000 for device 0000:01:00.0
>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:01:00.0 to 64
>[drm] Initialized radeon 1.25.0 20060524 on minor 0
>[drm] Used old pci detect: framebuffer loaded
>mtrr: 0xc0000000,0x8000000 overlaps existing 0xc0000000,0x4000000
>mtrr: 0xc0000000,0x8000000 overlaps existing 0xc0000000,0x4000000
>mtrr: 0xc0000000,0x8000000 overlaps existing 0xc0000000,0x4000000
>[drm] Setting GART location based on new memory map
>[drm] Loading R300 Microcode
>[drm] writeback test succeeded in 1 usecs
>tg3: eth0: Link is up at 100 Mbps, full duplex.
>tg3: eth0: Flow control is on for TX and on for RX.
>smapi smapi: set_real_thresh: set start to 59 for bat=0
>smapi smapi: set_real_thresh: set stop to 0 for bat=0

Actions: View

Attachments on bug 9446: 8212 | 8213 | 8214 | 8215

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.