Attachment 9096 Details for Bug 10259 – Relevant messages in the syslog archive.

Relevant messages in the syslog archive.

syslog.txt (text/plain), 2.12 KB, created by Giacomo Perale on 2007-03-11 16:37:32 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Giacomo Perale

Created: 2007-03-11 16:37:32 UTC

Size: 2.12 KB

patch

obsolete

>radeonfb_pci_register BEGIN
>ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
>ACPI: PCI Interrupt 0000:05:00.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 16
>radeonfb (0000:05:00.0): Found 262144k of DDR 128 bits wide videoram
>radeonfb (0000:05:00.0): mapped 16384k videoram
>radeonfb: Found Intel x86 BIOS ROM Image
>radeonfb: Retrieved PLL infos from BIOS
>radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=400.00 Mhz, System=250.00 MHz
>radeonfb: PLL min 20000 max 40000
>1 chips in connector info
>- chip 1 has 2 connectors
>* connector 0 of type 2 (CRT) : 2300
>* connector 1 of type 3 (DVI-I) : 3221
>Starting monitor auto detection...
>i2c_adapter i2c-0: unable to read EDID block.
>i2c_adapter i2c-0: unable to read EDID block.
>i2c_adapter i2c-0: unable to read EDID block.
>radeonfb: I2C (port 1) ... not found
>i2c_adapter i2c-1: unable to read EDID block.
>i2c_adapter i2c-1: unable to read EDID block.
>i2c_adapter i2c-1: unable to read EDID block.
>radeonfb: I2C (port 2) ... not found
>radeonfb: I2C (port 3) ... found CRT display
>radeonfb: I2C (port 4) ... not found
>i2c_adapter i2c-1: unable to read EDID block.
>i2c_adapter i2c-1: unable to read EDID block.
>i2c_adapter i2c-1: unable to read EDID block.
>radeonfb: I2C (port 2) ... not found
>radeonfb: I2C (port 4) ... not found
>radeonfb: I2C (port 3) ... found CRT display
>radeonfb: Monitor 1 type CRT found
>radeonfb: EDID probed
>radeonfb: Monitor 2 type no found
>hStart = 1040, hEnd = 1136, hTotal = 1312
>vStart = 769, vEnd = 772, vTotal = 800
>h_total_disp = 0x7f00a3         hsync_strt_wid = 0xc040d
>v_total_disp = 0x2ff031f        vsync_strt_wid = 0x30300
>pixclock = 12690
>freq = 7880
>freq = 7880, PLL min = 20000, PLL max = 40000
>ref_div = 12, ref_clk = 2700, output_freq = 31520
>ref_div = 12, ref_clk = 2700, output_freq = 31520
>post div = 0x2
>fb_div = 0x8c
>ppll_div_3 = 0x2008c
>Console: switching to colour frame buffer device 128x48
>radeonfb (0000:05:00.0): ATI Radeon [c 
>radeonfb_pci_register END
>
>
>[drm] Initialized drm 1.1.0 20060810
>[drm] Initialized radeon 1.25.0 20060524 on minor 0
>
>
>[drm] Setting GART location based on new memory map
>[drm] Loading R300 Microcode
>[drm] writeback test succeeded in 1 usecs

Actions: View

Attachments on bug 10259: 9095 | 9096

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.