Attachment 91806 Details for Bug 72752 – eDP black screen

eDP black screen

edp_black_screen.dmesg (text/plain), 122.45 KB, created by Guo Jinxian on 2014-01-10 05:43:07 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Guo Jinxian

Created: 2014-01-10 05:43:07 UTC

Size: 122.45 KB

patch

obsolete

>[    1.907435] [drm:intel_dp_init_connector], Adding DP connector on port B
>[    1.907625] [drm:intel_dp_i2c_init], i2c_init DPDDC-B
>[    1.908119] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000010
>[    1.908609] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000010
>[    1.909096] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000010
>[    1.909580] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000010
>[    1.910066] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000010
>[    1.910078] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x71450064
>[    1.910086] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110
>[    1.910567] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000010
>[    1.911052] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000010
>[    1.911536] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000010
>[    1.912022] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000010
>[    1.912506] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000010
>[    1.912527] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x71450064
>[    1.912539] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110
>[    1.912911] [drm:intel_dp_init_connector], Adding eDP connector on port C
>[    1.913059] [drm:intel_dp_i2c_init], i2c_init DPDDC-C
>[    1.913065] [drm:ironlake_edp_panel_vdd_on], Turning eDP VDD on
>[    1.913073] [drm:ironlake_edp_panel_vdd_on], PP_STATUS: 0xc0000008 PP_CONTROL: 0xabcd000d
>[    1.913204] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    1.923531] [drm:intel_dp_i2c_aux_ch], aux_i2c nack
>[    1.923662] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    1.934532] [drm:intel_dp_i2c_aux_ch], aux_i2c nack
>[    1.934573] [drm:ironlake_panel_vdd_off_sync], Turning eDP VDD off
>[    1.934580] [drm:ironlake_panel_vdd_off_sync], PP_STATUS: 0xc0000008 PP_CONTROL: 0xabcd0005
>[    1.934722] [drm:intel_dp_init_panel_power_sequencer], cur t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000
>[    1.934727] [drm:intel_dp_init_panel_power_sequencer], vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000
>[    1.934731] [drm:intel_dp_init_panel_power_sequencer], panel power up delay 200, power down delay 50, power cycle delay 600
>[    1.934734] [drm:intel_dp_init_panel_power_sequencer], backlight on delay 1, off delay 200
>[    1.934737] [drm:ironlake_edp_panel_vdd_on], Turning eDP VDD on
>[    1.934744] [drm:ironlake_edp_panel_vdd_on], PP_STATUS: 0xc0000008 PP_CONTROL: 0xabcd000d
>[    1.934999] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    1.945539] [drm:intel_dp_get_dpcd], DPCD: 12 0a 82 41 00 00 01 80 02 00 00 00 0f 0b 00
>[    1.945690] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    1.956537] [drm:intel_dp_get_dpcd], Detected EDP PSR Panel.
>[    1.956546] [drm:intel_dp_init_panel_power_sequencer_registers], panel power sequencer register settings: PP_ON 0x87d0000a, PP_OFF 0x1f407d0, PP_DIV 0x270f06
>[    1.956674] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    1.967673] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    1.978656] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    1.989671] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    2.000655] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    2.011535] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[    2.011662] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    2.022671] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    2.033655] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    2.044670] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    2.055670] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    2.066670] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    2.077671] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    2.088670] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    2.090288] asix 1-1:1.0 eth0: register 'asix' at usb-0000:00:14.0-1, ASIX AX88772B USB 2.0 Ethernet, 00:24:8c:02:95:30
>[    2.099690] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    2.110670] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    2.121669] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    2.132668] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    2.142531] tsc: Refined TSC clocksource calibration: 2133.332 MHz
>[    2.143670] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    2.154671] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    2.165671] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    2.176670] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    2.187670] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    2.198672] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    2.209672] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    2.220670] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    2.231670] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    2.242551] usb 1-2: new low-speed USB device number 3 using xhci_hcd
>[    2.242672] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    2.253672] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    2.259062] usb 1-2: New USB device found, idVendor=0461, idProduct=0010
>[    2.259070] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    2.259077] usb 1-2: Product: USB Keyboard
>[    2.259082] usb 1-2: Manufacturer: NOVATEK
>[    2.259328] usb 1-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
>[    2.259339] usb 1-2: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
>[    2.262602] input: NOVATEK USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/input/input4
>[    2.262835] hid-generic 0003:0461:0010.0001: input,hidraw0: USB HID v1.10 Keyboard [NOVATEK USB Keyboard] on usb-0000:00:14.0-2/input0
>[    2.264688] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    2.267630] input: NOVATEK USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/input/input5
>[    2.267935] hid-generic 0003:0461:0010.0002: input,hidraw1: USB HID v1.10 Device [NOVATEK USB Keyboard] on usb-0000:00:14.0-2/input1
>[    2.275691] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    2.286672] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    2.297670] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    2.308669] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    2.319666] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    2.330670] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    2.341671] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    2.352671] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    2.363670] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    2.374673] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    2.385671] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    2.396670] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    2.407670] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    2.418670] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    2.420560] usb 1-6: new high-speed USB device number 4 using xhci_hcd
>[    2.429674] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    2.431682] usb 1-6: New USB device found, idVendor=0424, idProduct=2640
>[    2.431692] usb 1-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    2.432245] hub 1-6:1.0: USB hub found
>[    2.432280] hub 1-6:1.0: 3 ports detected
>[    2.440678] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    2.451672] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    2.462672] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    2.473670] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    2.484671] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    2.495670] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    2.506670] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    2.517670] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    2.528670] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    2.539672] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    2.550670] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    2.561670] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    2.572670] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    2.583669] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    2.594669] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    2.605670] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    2.616670] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    2.627670] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    2.638672] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    2.649672] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    2.660672] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    2.671670] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    2.682672] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    2.693670] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    2.704682] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    2.705561] usb 1-6.1: new high-speed USB device number 5 using xhci_hcd
>[    2.715673] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    2.723158] usb 1-6.1: New USB device found, idVendor=0424, idProduct=4040
>[    2.723167] usb 1-6.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[    2.723175] usb 1-6.1: Product: Ultra Fast Media Reader
>[    2.723181] usb 1-6.1: Manufacturer: Generic
>[    2.723186] usb 1-6.1: SerialNumber: 000000264001
>[    2.723746] usb-storage 1-6.1:1.0: USB Mass Storage device detected
>[    2.723854] scsi2 : usb-storage 1-6.1:1.0
>[    2.726689] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    2.737682] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    2.748669] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    2.759669] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    2.770669] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    2.781669] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    2.792668] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    2.796550] usb 1-6.2: new low-speed USB device number 6 using xhci_hcd
>[    2.803669] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    2.811743] usb 1-6.2: New USB device found, idVendor=046d, idProduct=c05a
>[    2.811752] usb 1-6.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    2.811759] usb 1-6.2: Product: USB Optical Mouse
>[    2.811765] usb 1-6.2: Manufacturer: Logitech
>[    2.811952] usb 1-6.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
>[    2.814236] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6.2/1-6.2:1.0/input/input6
>[    2.814689] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    2.814750] hid-generic 0003:046D:C05A.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-6.2/input0
>[    2.825687] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    2.836674] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    2.847671] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    2.858670] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    2.869670] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    2.880670] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    2.891669] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    2.902670] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    2.913670] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    2.924670] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    2.935670] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    2.946670] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    2.957670] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    2.968669] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    2.979670] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    2.990670] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    3.001670] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    3.012670] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    3.023672] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    3.034672] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    3.045672] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    3.056672] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    3.067672] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    3.078672] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    3.089671] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    3.100672] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    3.111672] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    3.122672] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    3.133672] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    3.142629] Switched to clocksource tsc
>[    3.144658] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    3.155659] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    3.166660] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    3.177660] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    3.188660] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    3.199660] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    3.210660] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    3.221660] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    3.232660] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    3.243660] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    3.254660] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    3.265660] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    3.276660] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    3.287660] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    3.298660] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    3.309660] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    3.320659] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    3.331660] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    3.342659] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    3.353660] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    3.364660] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    3.375660] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    3.386659] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    3.397659] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    3.408659] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    3.419660] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    3.430659] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    3.441660] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    3.452644] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020
>[    3.463525] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[    3.463540] [drm:drm_edid_to_eld], ELD: no CEA Extension found
>[    3.463737] [drm:intel_panel_setup_backlight], backlight initialized, enabled, brightness 7812/7812, sysfs interface registered
>[    3.463746] [drm:intel_dsi_init], 
>[    3.463751] [drm:intel_dsi_init], no device found
>[    3.463761] [drm:i915_gem_setup_global_gtt], clearing unused GTT space: [0, 7ffff000]
>[    3.466013] [drm:i915_gem_context_init], HW context support initialized
>[    3.466035] [drm:init_status_page], render ring hws offset: 0x00001000
>[    3.466039] [drm:i915_gem_object_create_stolen], creating stolen object: size=20000
>[    3.466043] [drm:i915_pages_create_for_stolen], offset=0x0, size=131072
>[    3.467540] [drm:init_pipe_control], render ring pipe control offset: 0x00024000
>[    3.467554] [drm:init_status_page], bsd ring hws offset: 0x00025000
>[    3.467557] [drm:i915_gem_object_create_stolen], creating stolen object: size=20000
>[    3.467561] [drm:i915_pages_create_for_stolen], offset=0x20000, size=131072
>[    3.467606] [drm:init_status_page], blitter ring hws offset: 0x00048000
>[    3.467610] [drm:i915_gem_object_create_stolen], creating stolen object: size=20000
>[    3.467613] [drm:i915_pages_create_for_stolen], offset=0x40000, size=131072
>[    3.469522] [drm:valleyview_init_clock_gating], DDR speed: 1333 MHz
>[    3.469541] [drm:intel_crt_reset], pch crt adpa set to 0xf40000
>[    3.471522] [drm:intel_modeset_readout_hw_state], [CRTC:3] hw state readout: enabled
>[    3.471527] [drm:intel_modeset_readout_hw_state], [CRTC:6] hw state readout: disabled
>[    3.471532] [drm:intel_modeset_readout_hw_state], [ENCODER:10:DAC-10] hw state readout: disabled, pipe A
>[    3.471537] [drm:intel_modeset_readout_hw_state], [ENCODER:11:TMDS-11] hw state readout: disabled, pipe A
>[    3.471541] [drm:intel_modeset_readout_hw_state], [ENCODER:15:TMDS-15] hw state readout: disabled, pipe A
>[    3.471545] [drm:intel_modeset_readout_hw_state], [ENCODER:17:TMDS-17] hw state readout: disabled, pipe A
>[    3.471552] [drm:intel_dp_get_config], pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp
>[    3.471556] [drm:intel_modeset_readout_hw_state], [ENCODER:19:TMDS-19] hw state readout: enabled, pipe A
>[    3.471561] [drm:intel_modeset_readout_hw_state], [CONNECTOR:20:eDP-1] hw state readout: enabled
>[    3.471565] [drm:intel_modeset_readout_hw_state], [CONNECTOR:9:VGA-1] hw state readout: disabled
>[    3.471569] [drm:intel_modeset_readout_hw_state], [CONNECTOR:12:HDMI-A-1] hw state readout: disabled
>[    3.471573] [drm:intel_modeset_readout_hw_state], [CONNECTOR:16:DP-1] hw state readout: disabled
>[    3.471577] [drm:intel_modeset_readout_hw_state], [CONNECTOR:18:HDMI-A-2] hw state readout: disabled
>[    3.471582] [drm:intel_dump_pipe_config], [CRTC:3][setup_hw_state] config for pipe A
>[    3.471585] [drm:intel_dump_pipe_config], cpu_transcoder: A
>[    3.471588] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0
>[    3.471592] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    3.471596] [drm:intel_dump_pipe_config], dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64
>[    3.471599] [drm:intel_dump_pipe_config], requested mode:
>[    3.471604] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 1920 0 0 0 1080 0 0 0 0x0 0x0
>[    3.471606] [drm:intel_dump_pipe_config], adjusted mode:
>[    3.471611] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0xa
>[    3.471615] [drm:intel_dump_crtc_timings], crtc timings: 138779 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x0 flags: 0xa
>[    3.471618] [drm:intel_dump_pipe_config], port clock: 270000
>[    3.471621] [drm:intel_dump_pipe_config], pipe src size: 1920x1080
>[    3.471625] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    3.471628] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    3.471631] [drm:intel_dump_pipe_config], ips: 0
>[    3.471633] [drm:intel_dump_pipe_config], double wide: 0
>[    3.471637] [drm:intel_dump_pipe_config], [CRTC:6][setup_hw_state] config for pipe B
>[    3.471640] [drm:intel_dump_pipe_config], cpu_transcoder: B
>[    3.471643] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0
>[    3.471647] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    3.471650] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    3.471653] [drm:intel_dump_pipe_config], requested mode:
>[    3.471657] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    3.471660] [drm:intel_dump_pipe_config], adjusted mode:
>[    3.471664] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    3.471668] [drm:intel_dump_crtc_timings], crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[    3.471671] [drm:intel_dump_pipe_config], port clock: 0
>[    3.471674] [drm:intel_dump_pipe_config], pipe src size: 0x0
>[    3.471677] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    3.471680] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    3.471683] [drm:intel_dump_pipe_config], ips: 0
>[    3.471686] [drm:intel_dump_pipe_config], double wide: 0
>[    3.471690] [drm:intel_connector_check_state], [CONNECTOR:20:eDP-1]
>[    3.471696] [drm:check_encoder_state], [ENCODER:10:DAC-10]
>[    3.471700] [drm:check_encoder_state], [ENCODER:11:TMDS-11]
>[    3.471704] [drm:check_encoder_state], [ENCODER:15:TMDS-15]
>[    3.471707] [drm:check_encoder_state], [ENCODER:17:TMDS-17]
>[    3.471711] [drm:check_encoder_state], [ENCODER:19:TMDS-19]
>[    3.471714] [drm:check_crtc_state], [CRTC:3]
>[    3.473525] [drm:check_crtc_state], [CRTC:6]
>[    3.473538] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:eDP-1]
>[    3.473542] [drm:intel_dp_detect], [CONNECTOR:20:eDP-1]
>[    3.473701] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[    3.484525] [drm:intel_dp_probe_oui], Sink OUI: 001cf8
>[    3.484678] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[    3.495524] [drm:intel_dp_probe_oui], Branch OUI: 000000
>[    3.495536] [drm:drm_edid_to_eld], ELD: no CEA Extension found
>[    3.495543] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:eDP-1] probed modes :
>[    3.495548] [drm:drm_mode_debug_printmodeline], Modeline 21:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa
>[    3.495552] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1]
>[    3.495556] [drm:intel_crt_detect], [CONNECTOR:9:VGA-1] force=1
>[    3.495559] [drm:valleyview_crt_detect_hotplug], trigger hotplug detect cycle: adpa=0xf40000
>[    3.501519] [drm:valleyview_crt_detect_hotplug], valleyview hotplug adpa=0xf40000, result 0
>[    3.501523] [drm:intel_crt_detect], CRT not detected via hotplug
>[    3.501676] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
>[    3.501681] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>[    3.501684] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[    3.501687] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
>[    3.503799] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>[    3.503804] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
>[    3.503807] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
>[    3.503810] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] disconnected
>[    3.503814] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1]
>[    3.503818] [drm:intel_hdmi_detect], [CONNECTOR:12:HDMI-A-1]
>[    3.503966] [drm:gmbus_xfer], GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
>[    3.503970] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb
>[    3.503973] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] disconnected
>[    3.503977] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-1]
>[    3.503980] [drm:intel_dp_detect], [CONNECTOR:16:DP-1]
>[    3.503984] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-1] disconnected
>[    3.503988] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2]
>[    3.503991] [drm:intel_hdmi_detect], [CONNECTOR:18:HDMI-A-2]
>[    3.504138] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[    3.504142] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
>[    3.504145] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] disconnected
>[    3.504149] [drm:drm_setup_crtcs], 
>[    3.504152] [drm:drm_enable_connectors], connector 20 enabled? yes
>[    3.504155] [drm:drm_enable_connectors], connector 9 enabled? no
>[    3.504158] [drm:drm_enable_connectors], connector 12 enabled? no
>[    3.504161] [drm:drm_enable_connectors], connector 16 enabled? no
>[    3.504164] [drm:drm_enable_connectors], connector 18 enabled? no
>[    3.504167] [drm:drm_target_preferred], looking for cmdline mode on connector 20
>[    3.504170] [drm:drm_target_preferred], looking for preferred mode on connector 20
>[    3.504173] [drm:drm_target_preferred], found mode 1920x1080
>[    3.504176] [drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config
>[    3.504180] [drm:drm_setup_crtcs], desired mode 1920x1080 set on crtc 3
>[    3.504185] [drm:intelfb_create], no BIOS fb, allocating a new one
>[    3.504188] [drm:i915_gem_object_create_stolen], creating stolen object: size=7e9000
>[    3.504196] [drm:i915_pages_create_for_stolen], offset=0x60000, size=8294400
>[    3.509087] [drm:intelfb_create], allocated 1920x1080 fb: 0x0006e000, bo ffff88000296e000
>[    3.509351] fbcon: inteldrmfb (fb0) is primary device
>[    3.509464] [drm:intel_crtc_set_config], [CRTC:3] [FB:26] #connectors=1 (x y) (0 0)
>[    3.509468] [drm:intel_set_config_compute_mode_changes], inactive crtc, full mode set
>[    3.509469] [drm:intel_set_config_compute_mode_changes], modes are different, full mode set
>[    3.509473] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    3.509477] [drm:drm_mode_debug_printmodeline], Modeline 25:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa
>[    3.509478] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=1, fb_changed=0
>[    3.509481] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3]
>[    3.509485] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 1, prepare: 1, disable: 0
>[    3.509489] [drm:connected_sink_compute_bpp], [CONNECTOR:20:eDP-1] checking for sink bpp constrains
>[    3.509493] [drm:intel_dp_compute_config], DP link computation with max lane count 2 max bw 0a pixel clock 138780KHz
>[    3.509502] [drm:intel_dp_compute_config], DP link bw 0a lane count 2 clock 270000 bpp 24
>[    3.509504] [drm:intel_dp_compute_config], DP link bw required 333072 available 432000
>[    3.509507] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 24, dithering: 0
>[    3.509509] [drm:intel_dump_pipe_config], [CRTC:3][modeset] config for pipe A
>[    3.509523] [drm:intel_dump_pipe_config], cpu_transcoder: A
>[    3.509525] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0
>[    3.509528] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    3.509530] [drm:intel_dump_pipe_config], dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64
>[    3.509532] [drm:intel_dump_pipe_config], requested mode:
>[    3.509535] [drm:drm_mode_debug_printmodeline], Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa
>[    3.509536] [drm:intel_dump_pipe_config], adjusted mode:
>[    3.509540] [drm:drm_mode_debug_printmodeline], Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa
>[    3.509543] [drm:intel_dump_crtc_timings], crtc timings: 138780 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x48 flags: 0xa
>[    3.509544] [drm:intel_dump_pipe_config], port clock: 270000
>[    3.509546] [drm:intel_dump_pipe_config], pipe src size: 1920x1080
>[    3.509548] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    3.509550] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    3.509551] [drm:intel_dump_pipe_config], ips: 0
>[    3.509552] [drm:intel_dump_pipe_config], double wide: 0
>[    3.517521] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0
>[    3.517524] [drm:ironlake_edp_backlight_off], 
>[    3.718664] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[    3.725283] scsi 2:0:0:0: Direct-Access     Generic  Ultra HS-COMBO   2.01 PQ: 0 ANSI: 0
>[    3.726392] sd 2:0:0:0: Attached scsi generic sg1 type 0
>[    3.729537] [drm:ironlake_edp_panel_off], Turn eDP power off
>[    3.729540] [drm:ironlake_wait_panel_off], Wait for panel power off time
>[    3.729544] [drm:ironlake_wait_panel_status], mask b000000f value 00000000 status c0000008 control abcd0008
>[    3.729667] sd 2:0:0:0: [sdb] Attached SCSI removable disk
>[    4.257975] [drm:ironlake_wait_panel_status], Wait complete
>[    4.275518] [drm:intel_dp_link_down], 
>[    4.327517] [drm:g4x_wait_for_vblank], vblank wait timed out
>[    4.378527] [drm:valleyview_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=2, cursor=2, SR: plane=0, cursor=0
>[    4.420530] [drm:i9xx_update_plane], Writing base 0006E000 00000000 0 0 7680
>[    4.420534] [drm:intel_edp_psr_match_conditions], PSR not supported on this platform
>[    4.420538] [drm:intel_crtc_mode_set], [ENCODER:19:TMDS-19] set [MODE:0:1920x1080]
>[    4.438524] [drm:intel_dp_init_panel_power_sequencer], cur t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000
>[    4.438527] [drm:intel_dp_init_panel_power_sequencer], vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000
>[    4.438529] [drm:intel_dp_init_panel_power_sequencer], panel power up delay 200, power down delay 50, power cycle delay 600
>[    4.438531] [drm:intel_dp_init_panel_power_sequencer], backlight on delay 1, off delay 200
>[    4.438536] [drm:intel_dp_init_panel_power_sequencer_registers], panel power sequencer register settings: PP_ON 0x87d0000a, PP_OFF 0x1f407d0, PP_DIV 0x270f06
>[    4.438771] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[    4.449671] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[    4.460668] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[    4.485522] [drm:intel_dp_set_signal_levels], Using signal levels 00000000
>[    4.485679] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[    4.496803] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[    4.507530] [drm:intel_dp_start_link_train], clock recovery OK
>[    4.507533] [drm:ironlake_edp_panel_on], Turn eDP power on
>[    4.507535] [drm:ironlake_wait_panel_power_cycle], Wait for panel power cycle
>[    4.507540] [drm:ironlake_wait_panel_status], mask b800000f value 00000000 status 00000000 control abcd0008
>[    4.507542] [drm:ironlake_wait_panel_status], Wait complete
>[    4.507546] [drm:ironlake_wait_panel_on], Wait for panel power on
>[    4.507550] [drm:ironlake_wait_panel_status], mask b000000f value 80000008 status 0000000a control abcd000b
>[    4.661667] [drm:ironlake_wait_panel_status], Wait complete
>[    4.661671] [drm:ironlake_panel_vdd_off_sync], Turning eDP VDD off
>[    4.661677] [drm:ironlake_panel_vdd_off_sync], PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0003
>[    4.661836] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[    4.673108] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[    4.683534] [drm:intel_dp_complete_link_train], Channel EQ done. DP Training successful
>[    4.683674] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[    4.694587] [drm:g4x_check_srwm], SR watermark: display plane 107, cursor 6
>[    4.694590] [drm:g4x_check_srwm], SR watermark: display plane 211, cursor 10
>[    4.694595] [drm:valleyview_update_wm], Setting FIFO watermarks - A: plane=61, cursor=6, B: plane=2, cursor=2, SR: plane=107, cursor=10
>[    4.704531] [drm:i915_gem_object_create_stolen_for_preallocated], creating preallocated stolen object: stolen_offset=3efa000, gtt_offset=ffffffff, size=6000
>[    4.704538] [drm:i915_pages_create_for_stolen], offset=0x3efa000, size=24576
>[    4.704552] [drm] Enabling RC6 states: RC6 off, RC6p off, RC6pp off
>[    4.706530] [drm:valleyview_enable_rps], GPLL enabled? yes
>[    4.706533] [drm:valleyview_enable_rps], GPU status: 0x0000c590
>[    4.706536] [drm:valleyview_enable_rps], current GPU freq: 292 MHz (197)
>[    4.708530] [drm:valleyview_enable_rps], max GPU freq: 708 MHz (217)
>[    4.712527] [drm:valleyview_enable_rps], RPe GPU freq: 375 MHz (201)
>[    4.714529] [drm:valleyview_enable_rps], min GPU freq: 167 MHz (191)
>[    4.714532] [drm:valleyview_enable_rps], setting GPU freq to 375 MHz (201)
>[    4.714535] [drm:valleyview_set_rps], GPU freq request from 292 MHz (197) to 375 MHz (201)
>[    4.728518] [drm:ironlake_edp_backlight_on], 
>[    4.730521] [drm:intel_panel_enable_backlight], pipe A
>[    4.730525] [drm:intel_panel_actually_set_backlight], set backlight PWM = 7812
>[    4.730532] [drm:intel_connector_check_state], [CONNECTOR:20:eDP-1]
>[    4.730537] [drm:check_encoder_state], [ENCODER:10:DAC-10]
>[    4.730539] [drm:check_encoder_state], [ENCODER:11:TMDS-11]
>[    4.730541] [drm:check_encoder_state], [ENCODER:15:TMDS-15]
>[    4.730544] [drm:check_encoder_state], [ENCODER:17:TMDS-17]
>[    4.730546] [drm:check_encoder_state], [ENCODER:19:TMDS-19]
>[    4.730548] [drm:check_crtc_state], [CRTC:3]
>[    4.732524] [drm:check_crtc_state], [CRTC:6]
>[    4.732529] [drm:intel_crtc_set_config], [CRTC:6] [NOFB]
>[    4.732532] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:6], mode_changed=0, fb_changed=0
>[    4.732535] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3]
>[    4.732543] Console: switching to colour frame buffer device 240x67
>[    4.732557] [drm:intel_crtc_set_config], [CRTC:3] [FB:26] #connectors=1 (x y) (0 0)
>[    4.732559] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
>[    4.732562] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3]
>[    4.747542] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
>[    4.747613] i915 0000:00:02.0: registered panic notifier
>[    4.753550] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
>[    4.754997] acpi device:20: registered as cooling_device3
>[    4.755847] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7
>[    4.756190] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
>[    4.764701] dracut: Starting plymouth daemon
>[    4.778457] [drm:intel_crtc_set_config], [CRTC:3] [FB:26] #connectors=1 (x y) (0 0)
>[    4.778463] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
>[    4.778466] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3]
>[    4.798795] [drm:i915_gem_open], 
>[    4.798842] [drm:intel_crtc_cursor_set], cursor off
>[    4.798848] [drm:intel_crtc_set_config], [CRTC:3] [FB:26] #connectors=1 (x y) (0 0)
>[    4.798856] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
>[    4.798861] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3]
>[    4.798865] [drm:intel_crtc_cursor_set], cursor off
>[    4.798868] [drm:intel_crtc_set_config], [CRTC:6] [NOFB]
>[    4.798871] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:6], mode_changed=0, fb_changed=0
>[    4.798875] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3]
>[    4.798897] [drm:i915_gem_open], 
>[    4.798922] [drm:intel_crtc_cursor_set], cursor off
>[    4.798926] [drm:intel_crtc_set_config], [CRTC:3] [FB:26] #connectors=1 (x y) (0 0)
>[    4.798930] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
>[    4.798935] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3]
>[    4.798938] [drm:intel_crtc_cursor_set], cursor off
>[    4.798941] [drm:intel_crtc_set_config], [CRTC:6] [NOFB]
>[    4.798944] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:6], mode_changed=0, fb_changed=0
>[    4.798948] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3]
>[    4.798965] [drm:i915_gem_open], 
>[    4.799433] [drm:intel_crtc_cursor_set], cursor off
>[    4.799439] [drm:intel_crtc_set_config], [CRTC:3] [FB:26] #connectors=1 (x y) (0 0)
>[    4.799444] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
>[    4.799449] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3]
>[    4.799452] [drm:intel_crtc_cursor_set], cursor off
>[    4.799455] [drm:intel_crtc_set_config], [CRTC:6] [NOFB]
>[    4.799459] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:6], mode_changed=0, fb_changed=0
>[    4.799462] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3]
>[    4.799955] dracut: error: unexpectedly disconnected from boot status daemon
>[    4.810440] [drm:intel_crtc_set_config], [CRTC:3] [FB:26] #connectors=1 (x y) (0 0)
>[    4.810445] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
>[    4.810449] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3]
>[    4.964443] ACPI: AC Adapter [ADP1] (on-line)
>[    4.975606] ACPI: Battery Slot [BAT0] (battery present)
>[    4.975740] ACPI: Battery Slot [BAT1] (battery absent)
>[    5.037332] snd_hda_intel 0000:00:1b.0: irq 106 for MSI/MSI-X
>[    5.040481] input: PC Speaker as /devices/platform/pcspkr/input/input8
>[    5.070151] ALSA sound/pci/hda/patch_realtek.c:419 SKU: Nid=0x1d sku_cfg=0x4014c601
>[    5.070156] ALSA sound/pci/hda/patch_realtek.c:421 SKU: port_connectivity=0x1
>[    5.070159] ALSA sound/pci/hda/patch_realtek.c:422 SKU: enable_pcbeep=0x1
>[    5.070162] ALSA sound/pci/hda/patch_realtek.c:423 SKU: check_sum=0x00000004
>[    5.070165] ALSA sound/pci/hda/patch_realtek.c:424 SKU: customization=0x000000c6
>[    5.070168] ALSA sound/pci/hda/patch_realtek.c:425 SKU: external_amp=0x0
>[    5.070171] ALSA sound/pci/hda/patch_realtek.c:426 SKU: platform_type=0x0
>[    5.070174] ALSA sound/pci/hda/patch_realtek.c:427 SKU: swap=0x0
>[    5.070177] ALSA sound/pci/hda/patch_realtek.c:428 SKU: override=0x1
>[    5.071306] ALSA sound/pci/hda/hda_auto_parser.c:393 autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
>[    5.071311] ALSA sound/pci/hda/hda_auto_parser.c:397    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>[    5.071315] ALSA sound/pci/hda/hda_auto_parser.c:401    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
>[    5.071318] ALSA sound/pci/hda/hda_auto_parser.c:402    mono: mono_out=0x0
>[    5.071321] ALSA sound/pci/hda/hda_auto_parser.c:406    inputs:
>[    5.071325] ALSA sound/pci/hda/hda_auto_parser.c:410      Front Mic=0x19
>[    5.071329] ALSA sound/pci/hda/hda_auto_parser.c:410      Rear Mic=0x18
>[    5.071332] ALSA sound/pci/hda/hda_auto_parser.c:410      Line=0x1a
>[    5.071336] ALSA sound/pci/hda/patch_realtek.c:491 realtek: No valid SSID, checking pincfg 0x4014c601 for NID 0x1d
>[    5.071340] ALSA sound/pci/hda/patch_realtek.c:507 realtek: Enabling init ASM_ID=0xc601 CODEC_ID=10ec0262
>[    5.127161] [drm:intel_crtc_set_config], [CRTC:3] [FB:26] #connectors=1 (x y) (0 0)
>[    5.127167] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
>[    5.127170] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3]
>[    5.156294] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
>[    5.198063] dracut: Checking ext4: /dev/sda4
>[    5.198462] dracut: issuing e2fsck -a  /dev/sda4
>[    5.207264] dracut: /dev/sda4: clean, 513594/3276800 files, 11040306/13107200 blocks
>[    5.208410] dracut: Remounting /dev/sda4 with -o ro
>[    5.214895] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
>[    5.221329] dracut: Mounted root filesystem /dev/sda4
>[    5.244061] device-mapper: uevent: version 1.0.3
>[    5.244452] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
>[    5.282022] dracut: Switching root
>[    5.333604] systemd[1]: systemd 204 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
>[    5.340042] systemd[1]: Failed to insert module 'ipv6'
>[    5.340386] systemd[1]: Set hostname to <x-byt01>.
>[    5.341886] random: systemd urandom read with 102 bits of entropy available
>[    5.365292] LVM: Logical Volume autoactivation enabled.
>[    5.365366] LVM: Activation generator successfully completed.
>[    5.418472] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
>[    5.418723] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
>[    5.418839] systemd[1]: Starting Syslog Socket.
>[    5.419093] systemd[1]: Listening on Syslog Socket.
>[    5.422952] systemd[1]: Starting Replay Read-Ahead Data...
>[    5.431399] systemd[1]: Starting Collect Read-Ahead Data...
>[    5.433777] systemd-readahead[2190]: Bumped block_nr parameter of 8:0 to 20480. This is a temporary hack and should be removed one day.
>[    5.443931] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
>[    5.445895] systemd-readahead[2191]: Failed to create fanotify object: Function not implemented
>[    5.456600] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
>[    5.460725] systemd[1]: Starting Delayed Shutdown Socket.
>[    5.469452] systemd[1]: Listening on Delayed Shutdown Socket.
>[    5.473701] systemd[1]: Starting udev Kernel Socket.
>[    5.482387] systemd[1]: Listening on udev Kernel Socket.
>[    5.486561] systemd[1]: Starting udev Control Socket.
>[    5.491857] random: nonblocking pool is initialized
>[    5.499077] systemd[1]: Listening on udev Control Socket.
>[    5.503117] systemd[1]: Starting Encrypted Volumes.
>[    5.511352] systemd[1]: Reached target Encrypted Volumes.
>[    5.515358] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
>[    5.523910] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
>[    5.528011] systemd[1]: Starting Journal Socket.
>[    5.536523] systemd[1]: Listening on Journal Socket.
>[    5.540706] systemd[1]: Starting Create static device nodes in /dev...
>[    5.550176] systemd[1]: Mounting POSIX Message Queue File System...
>[    5.561192] systemd[1]: Starting udev Coldplug all Devices...
>[    5.570255] systemd[1]: Mounting Debug File System...
>[    5.579466] systemd[1]: Starting Journal Service...
>[    5.596197] systemd[1]: Started Journal Service.
>[    5.600389] systemd[1]: Mounting Huge Pages File System...
>[    5.609091] systemd[1]: Starting LVM2 metadata daemon socket.
>[    5.619835] systemd[1]: Listening on LVM2 metadata daemon socket.
>[    5.623778] systemd[1]: Starting Device-mapper event daemon FIFOs.
>[    5.631901] systemd[1]: Listening on Device-mapper event daemon FIFOs.
>[    5.635842] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
>[    5.644777] systemd[1]: Expecting device dev-disk-by\x2duuid-1a1b79a3\x2d6d33\x2d48d2\x2da27e\x2d1b5805d88291.device...
>[    5.653188] systemd[1]: Mounting Temporary Directory...
>[    5.663568] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway.
>[    5.668354] systemd[1]: Expecting device dev-disk-by\x2duuid-ABCD\x2d535B.device...
>[    5.677589] systemd[1]: Expecting device dev-disk-by\x2duuid-0a7e090c\x2dd2b9\x2d498e\x2dbc0d\x2d05c33717cb8c.device...
>[    5.686335] systemd[1]: Expecting device dev-disk-by\x2duuid-d79f918f\x2d693d\x2d4480\x2d91cf\x2d6840792221db.device...
>[    5.700201] systemd[1]: Started Replay Read-Ahead Data.
>[    5.704674] systemd[1]: systemd-readahead-collect.service: main process exited, code=exited, status=1/FAILURE
>[    5.713826] systemd[1]: Started Collect Read-Ahead Data.
>[    5.723395] systemd[1]: Started Create static device nodes in /dev.
>[    5.732822] systemd[1]: Mounted POSIX Message Queue File System.
>[    5.742596] systemd[1]: Mounted Debug File System.
>[    5.751681] systemd[1]: Mounted Huge Pages File System.
>[    5.760584] systemd[1]: Mounted Temporary Directory.
>[    5.764981] systemd[1]: Starting udev Kernel Device Manager...
>[    5.774577] systemd[1]: Starting Load legacy module configuration...
>[    5.778225] systemd-udevd[2575]: starting version 204
>[    5.788326] systemd[1]: Started File System Check on Root Device.
>[    5.794893] systemd[1]: Starting Remount Root and Kernel File Systems...
>[    5.808458] systemd[1]: Started Load Kernel Modules.
>[    5.816639] systemd[1]: Mounting FUSE Control File System...
>[    5.826349] systemd[1]: Mounted Configuration File System.
>[    5.831477] EXT4-fs (sda4): re-mounted. Opts: (null)
>[    5.836647] systemd[1]: Started Set Up Additional Binary Formats.
>[    5.841005] systemd[1]: Starting Setup Virtual Console...
>[    5.852991] systemd[1]: Starting Apply Kernel Variables...
>[    5.870050] systemd[1]: Started udev Kernel Device Manager.
>[    5.880415] systemd[1]: Mounted FUSE Control File System.
>[    5.885698] systemd[1]: Starting LVM2 metadata daemon...
>[    5.900452] systemd[1]: Started Load legacy module configuration.
>[    5.909393] systemd[1]: Started Remount Root and Kernel File Systems.
>[    5.921106] systemd[1]: Started Apply Kernel Variables.
>[    5.925411] systemd[1]: Starting Local File Systems (Pre).
>[    5.938956] systemd[1]: Reached target Local File Systems (Pre).
>[    5.943224] systemd[1]: Starting Configure read-only root support...
>[    5.955293] systemd[1]: Started Import network configuration from initramfs.
>[    5.972427] systemd[1]: Started LVM2 metadata daemon.
>[    5.993070] systemd[1]: Started Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
>[    6.000774] [drm:intel_crtc_set_config], [CRTC:3] [FB:26] #connectors=1 (x y) (0 0)
>[    6.000779] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
>[    6.000783] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3]
>[    6.022050] systemd[1]: Started Configure read-only root support.
>[    6.027113] systemd[1]: Starting Load Random Seed...
>[    6.045587] systemd[1]: Started Setup Virtual Console.
>[    6.055360] systemd[1]: Started Load Random Seed.
>[    6.124411] systemd[1]: Starting Sound Card.
>[    6.134475] systemd[1]: Reached target Sound Card.
>[    6.148669] systemd[1]: Started udev Coldplug all Devices.
>[    6.152617] systemd[1]: Starting Show Plymouth Boot Screen...
>[    6.221577] [drm:i915_gem_open], 
>[    6.221625] [drm:intel_crtc_cursor_set], cursor off
>[    6.221632] [drm:intel_crtc_set_config], [CRTC:3] [FB:26] #connectors=1 (x y) (0 0)
>[    6.221638] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
>[    6.221644] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3]
>[    6.221648] [drm:intel_crtc_cursor_set], cursor off
>[    6.221651] [drm:intel_crtc_set_config], [CRTC:6] [NOFB]
>[    6.221655] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:6], mode_changed=0, fb_changed=0
>[    6.221658] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3]
>[    6.221681] [drm:i915_gem_open], 
>[    6.221707] [drm:intel_crtc_cursor_set], cursor off
>[    6.221712] [drm:intel_crtc_set_config], [CRTC:3] [FB:26] #connectors=1 (x y) (0 0)
>[    6.221716] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
>[    6.221720] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3]
>[    6.221723] [drm:intel_crtc_cursor_set], cursor off
>[    6.221726] [drm:intel_crtc_set_config], [CRTC:6] [NOFB]
>[    6.221730] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:6], mode_changed=0, fb_changed=0
>[    6.221733] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3]
>[    6.221752] [drm:i915_gem_open], 
>[    6.221845] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[5] ENCODERS[5]
>[    6.221852] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[5] ENCODERS[5]
>[    6.221863] [drm:drm_mode_getconnector], [CONNECTOR:20:?]
>[    6.221868] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:eDP-1]
>[    6.221873] [drm:intel_dp_detect], [CONNECTOR:20:eDP-1]
>[    6.221878] [drm:ironlake_edp_panel_vdd_on], Turning eDP VDD on
>[    6.221884] [drm:ironlake_edp_panel_vdd_on], PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f
>[    6.222047] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[    6.232612] [drm:intel_dp_probe_oui], Sink OUI: 001cf8
>[    6.232775] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[    6.244044] [drm:intel_dp_probe_oui], Branch OUI: 000000
>[    6.244066] [drm:drm_edid_to_eld], ELD: no CEA Extension found
>[    6.244073] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:eDP-1] probed modes :
>[    6.244079] [drm:drm_mode_debug_printmodeline], Modeline 21:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa
>[    6.244093] [drm:drm_mode_getconnector], [CONNECTOR:20:?]
>[    6.251749] Adding 3964924k swap on /dev/sda3.  Priority:-1 extents:1 across:3964924k SS
>[    6.281242] [drm:drm_mode_getconnector], [CONNECTOR:9:?]
>[    6.281252] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1]
>[    6.281257] [drm:intel_crt_detect], [CONNECTOR:9:VGA-1] force=1
>[    6.281262] [drm:valleyview_crt_detect_hotplug], trigger hotplug detect cycle: adpa=0xf40000
>[    6.286550] [drm:valleyview_crt_detect_hotplug], valleyview hotplug adpa=0xf40000, result 0
>[    6.286556] [drm:intel_crt_detect], CRT not detected via hotplug
>[    6.286716] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
>[    6.286721] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>[    6.286724] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[    6.286727] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
>[    6.288818] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>[    6.288827] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
>[    6.288830] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
>[    6.288836] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] disconnected
>[    6.288850] [drm:drm_mode_getconnector], [CONNECTOR:9:?]
>[    6.288854] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1]
>[    6.288858] [drm:intel_crt_detect], [CONNECTOR:9:VGA-1] force=1
>[    6.288862] [drm:valleyview_crt_detect_hotplug], trigger hotplug detect cycle: adpa=0xf40000
>[    6.295634] [drm:valleyview_crt_detect_hotplug], valleyview hotplug adpa=0xf40000, result 0
>[    6.295641] [drm:intel_crt_detect], CRT not detected via hotplug
>[    6.295879] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
>[    6.295885] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>[    6.295888] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[    6.295891] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
>[    6.297822] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>[    6.297830] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
>[    6.297834] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
>[    6.297839] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] disconnected
>[    6.297859] [drm:drm_mode_getconnector], [CONNECTOR:12:?]
>[    6.297864] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1]
>[    6.297868] [drm:intel_hdmi_detect], [CONNECTOR:12:HDMI-A-1]
>[    6.298033] [drm:gmbus_xfer], GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
>[    6.298038] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb
>[    6.298043] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] disconnected
>[    6.298051] [drm:drm_mode_getconnector], [CONNECTOR:12:?]
>[    6.298054] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1]
>[    6.298073] [drm:intel_hdmi_detect], [CONNECTOR:12:HDMI-A-1]
>[    6.298241] [drm:gmbus_xfer], GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
>[    6.298246] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb
>[    6.298250] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] disconnected
>[    6.298262] [drm:drm_mode_getconnector], [CONNECTOR:16:?]
>[    6.298266] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-1]
>[    6.298270] [drm:intel_dp_detect], [CONNECTOR:16:DP-1]
>[    6.298275] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-1] disconnected
>[    6.298279] [drm:drm_mode_getconnector], [CONNECTOR:16:?]
>[    6.298283] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-1]
>[    6.298286] [drm:intel_dp_detect], [CONNECTOR:16:DP-1]
>[    6.298290] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-1] disconnected
>[    6.298296] [drm:drm_mode_getconnector], [CONNECTOR:18:?]
>[    6.298299] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2]
>[    6.298303] [drm:intel_hdmi_detect], [CONNECTOR:18:HDMI-A-2]
>[    6.298472] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[    6.298477] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
>[    6.298481] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] disconnected
>[    6.298488] [drm:drm_mode_getconnector], [CONNECTOR:18:?]
>[    6.298492] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2]
>[    6.298495] [drm:intel_hdmi_detect], [CONNECTOR:18:HDMI-A-2]
>[    6.298646] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[    6.298651] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
>[    6.298655] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] disconnected
>[    6.298685] [drm:drm_mode_addfb], [FB:27]
>[    6.317641] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
>[    6.342679] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
>[    6.358942] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
>[    6.368062] systemd-udevd[2594]: renamed network interface eth0 to enp0s20u1
>[    6.406932] type=1305 audit(978307884.404:2): audit_pid=3031 old=0 auid=4294967295 ses=4294967295 res=1
>[    6.501406] systemd[1]: Unit rngd.service entered failed state.
>[    6.540074] traps: alsactl[3047] general protection ip:372f048c39 sp:7fff87080cf0 error:0 in libc-2.17.so[372f000000+1b5000]
>[    7.665200] asix 1-1:1.0 enp0s20u1: link down
>[    9.248528] [drm:ironlake_panel_vdd_off_sync], Turning eDP VDD off
>[    9.248538] [drm:ironlake_panel_vdd_off_sync], PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007
>[    9.330186] asix 1-1:1.0 enp0s20u1: link up, 100Mbps, full-duplex, lpa 0x43E1
>[   10.921286] [drm:intel_crtc_cursor_set], cursor off
>[   10.921296] [drm:intel_crtc_set_config], [CRTC:3] [FB:26] #connectors=1 (x y) (0 0)
>[   10.921303] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
>[   10.921308] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3]
>[   10.921312] [drm:intel_crtc_cursor_set], cursor off
>[   10.921315] [drm:intel_crtc_set_config], [CRTC:6] [NOFB]
>[   10.921319] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:6], mode_changed=0, fb_changed=0
>[   10.921323] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3]
>[   11.729861] Ebtables v2.0 registered
>[   11.817087] ip_tables: (C) 2000-2006 Netfilter Core Team
>[   11.933365] NET: Registered protocol family 10
>[   11.959992] ip6_tables: (C) 2000-2006 Netfilter Core Team
>[   62.833285] usb 1-6.2: USB disconnect, device number 6
>[   64.290040] usb 1-6.2: new low-speed USB device number 7 using xhci_hcd
>[   64.308534] usb 1-6.2: New USB device found, idVendor=046d, idProduct=c05a
>[   64.308872] usb 1-6.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[   64.309208] usb 1-6.2: Product: USB Optical Mouse
>[   64.309429] usb 1-6.2: Manufacturer: Logitech
>[   64.310167] usb 1-6.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
>[   64.312814] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6.2/1-6.2:1.0/input/input9
>[   64.313351] hid-generic 0003:046D:C05A.0004: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-6.2/input0
>[  124.529274] usb 1-6.2: USB disconnect, device number 7
>[  125.986012] usb 1-6.2: new low-speed USB device number 8 using xhci_hcd
>[  126.004538] usb 1-6.2: New USB device found, idVendor=046d, idProduct=c05a
>[  126.004879] usb 1-6.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[  126.005214] usb 1-6.2: Product: USB Optical Mouse
>[  126.005502] usb 1-6.2: Manufacturer: Logitech
>[  126.007508] usb 1-6.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
>[  126.011685] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6.2/1-6.2:1.0/input/input10
>[  126.013158] hid-generic 0003:046D:C05A.0005: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-6.2/input0
>[  186.225257] usb 1-6.2: USB disconnect, device number 8
>[  187.681956] usb 1-6.2: new low-speed USB device number 9 using xhci_hcd
>[  187.700563] usb 1-6.2: New USB device found, idVendor=046d, idProduct=c05a
>[  187.700904] usb 1-6.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[  187.701239] usb 1-6.2: Product: USB Optical Mouse
>[  187.701527] usb 1-6.2: Manufacturer: Logitech
>[  187.703392] usb 1-6.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
>[  187.708917] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6.2/1-6.2:1.0/input/input11
>[  187.709611] hid-generic 0003:046D:C05A.0006: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-6.2/input0
>[  247.921265] usb 1-6.2: USB disconnect, device number 9
>[  249.377902] usb 1-6.2: new low-speed USB device number 10 using xhci_hcd
>[  249.396519] usb 1-6.2: New USB device found, idVendor=046d, idProduct=c05a
>[  249.396860] usb 1-6.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[  249.397196] usb 1-6.2: Product: USB Optical Mouse
>[  249.397485] usb 1-6.2: Manufacturer: Logitech
>[  249.398902] usb 1-6.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
>[  249.402256] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6.2/1-6.2:1.0/input/input12
>[  249.403851] hid-generic 0003:046D:C05A.0007: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-6.2/input0
>[  291.391928] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000800
>[  291.391951] [drm:intel_hpd_irq_handler], Received HPD interrupt on PIN 1 - cnt: 0
>[  291.392045] [drm:i915_hotplug_work_func], running encoder hotplug functions
>[  291.392066] [drm:i915_hotplug_work_func], Connector VGA-1 (pin 1) received hotplug event.
>[  291.392084] [drm:intel_crt_detect], [CONNECTOR:9:VGA-1] force=0
>[  291.392098] [drm:valleyview_crt_detect_hotplug], trigger hotplug detect cycle: adpa=0x3f40000
>[  291.397372] [drm:valleyview_crt_detect_hotplug], valleyview hotplug adpa=0x3f40000, result 1
>[  291.397388] [drm:intel_crt_detect], CRT detected via hotplug
>[  291.397405] [drm:intel_hpd_irq_event], [CONNECTOR:9:VGA-1] status updated from disconnected to connected
>[  291.398790] [drm:drm_fb_helper_hotplug_event], 
>[  291.398812] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:eDP-1]
>[  291.398828] [drm:intel_dp_detect], [CONNECTOR:20:eDP-1]
>[  291.398844] [drm:ironlake_edp_panel_vdd_on], Turning eDP VDD on
>[  291.398863] [drm:ironlake_edp_panel_vdd_on], PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f
>[  291.399056] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  291.409354] [drm:intel_dp_probe_oui], Sink OUI: 001cf8
>[  291.409514] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  291.420345] [drm:intel_dp_probe_oui], Branch OUI: 000000
>[  291.420364] [drm:drm_edid_to_eld], ELD: no CEA Extension found
>[  291.420371] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:eDP-1] probed modes :
>[  291.420377] [drm:drm_mode_debug_printmodeline], Modeline 21:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa
>[  291.420382] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1]
>[  291.420386] [drm:intel_crt_detect], [CONNECTOR:9:VGA-1] force=1
>[  291.420390] [drm:valleyview_crt_detect_hotplug], trigger hotplug detect cycle: adpa=0x3f40000
>[  291.426336] [drm:valleyview_crt_detect_hotplug], valleyview hotplug adpa=0x3f40000, result 1
>[  291.426340] [drm:intel_crt_detect], CRT detected via hotplug
>[  291.438765] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 159
>[  291.438865] Raw EDID:
>[  291.438895]  	00 ff ff ff ff ff ff 00 04 69 b1 23 4b 0c 01 00
>[  291.438960]  	10 17 01 03 68 33 1d 78 2a 5e a5 a2 55 4d a0 26
>[  291.439025]  	11 50 54 bf ef 00 d1 c0 95 00 81 40 81 80 81 c0
>[  291.439090]  	95 0f b3 00 71 4f 02 3a 80 18 71 38 2d 40 58 2c
>[  291.439155]  	45 00 fd 1e 11 00 00 1e 00 00 00 ff 00 44 34 4c
>[  291.439220]  	4d 54 46 30 00 00 00 00 00 00 00 00 00 00 00 00
>[  291.439284]  	00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>[  291.439361]  	00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>[  291.451379] Raw EDID:
>[  291.451413]  	00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>[  291.451478]  	00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>[  291.451543]  	00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>[  291.451608]  	00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>[  291.451673]  	00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>[  291.451738]  	00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>[  291.451803]  	00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>[  291.451868]  	00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>[  291.463883] Raw EDID:
>[  291.463916]  	00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>[  291.463981]  	00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>[  291.464046]  	00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>[  291.467613]  	00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>[  291.471151]  	00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>[  291.474631]  	00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>[  291.478051]  	00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>[  291.481429]  	00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>[  291.496713] Raw EDID:
>[  291.500012]  	00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>[  291.503344]  	00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>[  291.506631]  	00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>[  291.509870]  	00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>[  291.513068]  	00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>[  291.516232]  	00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>[  291.519348]  	00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>[  291.522440]  	00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>[  291.525476] i915 0000:00:02.0: VGA-1: EDID block 0 invalid.
>[  291.528457] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[  291.528463] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
>[  291.530617] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>[  291.530622] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
>[  291.530639] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] probed modes :
>[  291.530646] [drm:drm_mode_debug_printmodeline], Modeline 31:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[  291.530651] [drm:drm_mode_debug_printmodeline], Modeline 29:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[  291.530656] [drm:drm_mode_debug_printmodeline], Modeline 28:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
>[  291.530661] [drm:drm_mode_debug_printmodeline], Modeline 30:"848x480" 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
>[  291.530666] [drm:drm_mode_debug_printmodeline], Modeline 27:"640x480" 60 25175 640 656 752 800 480 489 492 525 0x40 0xa
>[  291.530671] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1]
>[  291.530675] [drm:intel_hdmi_detect], [CONNECTOR:12:HDMI-A-1]
>[  291.530825] [drm:gmbus_xfer], GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
>[  291.530829] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb
>[  291.530833] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] disconnected
>[  291.530837] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-1]
>[  291.530841] [drm:intel_dp_detect], [CONNECTOR:16:DP-1]
>[  291.530845] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-1] disconnected
>[  291.530849] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2]
>[  291.530852] [drm:intel_hdmi_detect], [CONNECTOR:18:HDMI-A-2]
>[  291.530999] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[  291.531002] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
>[  291.531006] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] disconnected
>[  291.531010] [drm:drm_setup_crtcs], 
>[  291.531014] [drm:drm_enable_connectors], connector 20 enabled? yes
>[  291.531017] [drm:drm_enable_connectors], connector 9 enabled? yes
>[  291.531020] [drm:drm_enable_connectors], connector 12 enabled? no
>[  291.531023] [drm:drm_enable_connectors], connector 16 enabled? no
>[  291.531026] [drm:drm_enable_connectors], connector 18 enabled? no
>[  291.531029] [drm:drm_target_preferred], looking for cmdline mode on connector 20
>[  291.531032] [drm:drm_target_preferred], looking for preferred mode on connector 20
>[  291.531035] [drm:drm_target_preferred], found mode 1920x1080
>[  291.531038] [drm:drm_target_preferred], looking for cmdline mode on connector 9
>[  291.531041] [drm:drm_target_preferred], looking for preferred mode on connector 9
>[  291.531044] [drm:drm_target_preferred], found mode 1024x768
>[  291.531047] [drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config
>[  291.531054] [drm:drm_setup_crtcs], desired mode 1920x1080 set on crtc 3
>[  291.531059] [drm:drm_setup_crtcs], desired mode 1024x768 set on crtc 6
>[  291.531065] [drm:intel_crtc_set_config], [CRTC:3] [FB:26] #connectors=1 (x y) (0 0)
>[  291.531070] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
>[  291.531074] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3]
>[  291.531079] [drm:intel_crtc_set_config], [CRTC:6] [FB:26] #connectors=1 (x y) (0 0)
>[  291.531082] [drm:intel_set_config_compute_mode_changes], inactive crtc, full mode set
>[  291.531085] [drm:intel_set_config_compute_mode_changes], modes are different, full mode set
>[  291.531090] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[  291.531095] [drm:drm_mode_debug_printmodeline], Modeline 32:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[  291.531098] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:6], mode_changed=1, fb_changed=0
>[  291.531101] [drm:intel_modeset_stage_output_state], encoder changed, full mode switch
>[  291.531105] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3]
>[  291.531109] [drm:intel_modeset_stage_output_state], [CONNECTOR:9:VGA-1] to [CRTC:6]
>[  291.531111] [drm:intel_modeset_stage_output_state], crtc changed, full mode switch
>[  291.531116] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 2, prepare: 2, disable: 0
>[  291.531121] [drm:connected_sink_compute_bpp], [CONNECTOR:9:VGA-1] checking for sink bpp constrains
>[  291.531125] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 24, dithering: 0
>[  291.531129] [drm:intel_dump_pipe_config], [CRTC:6][modeset] config for pipe B
>[  291.531132] [drm:intel_dump_pipe_config], cpu_transcoder: B
>[  291.531135] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0
>[  291.531139] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  291.531142] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  291.531145] [drm:intel_dump_pipe_config], requested mode:
>[  291.531150] [drm:drm_mode_debug_printmodeline], Modeline 0:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[  291.531153] [drm:intel_dump_pipe_config], adjusted mode:
>[  291.531158] [drm:drm_mode_debug_printmodeline], Modeline 0:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[  291.531162] [drm:intel_dump_crtc_timings], crtc timings: 65000 1024 1048 1184 1344 768 771 777 806, type: 0x40 flags: 0xa
>[  291.531165] [drm:intel_dump_pipe_config], port clock: 65000
>[  291.531168] [drm:intel_dump_pipe_config], pipe src size: 1024x768
>[  291.531172] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[  291.531175] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[  291.531178] [drm:intel_dump_pipe_config], ips: 0
>[  291.531181] [drm:intel_dump_pipe_config], double wide: 0
>[  291.584346] [drm:i9xx_update_plane], Writing base 0006E000 00000000 0 0 7680
>[  291.584359] [drm:intel_edp_psr_match_conditions], PSR not supported on this platform
>[  291.584364] [drm:intel_crtc_mode_set], [ENCODER:10:DAC-10] set [MODE:0:1024x768]
>[  291.585021] [drm:valleyview_update_wm], Setting FIFO watermarks - A: plane=61, cursor=6, B: plane=150, cursor=6, SR: plane=0, cursor=0
>[  291.602341] [drm:intel_connector_check_state], [CONNECTOR:20:eDP-1]
>[  291.602347] [drm:intel_connector_check_state], [CONNECTOR:9:VGA-1]
>[  291.602353] [drm:check_encoder_state], [ENCODER:10:DAC-10]
>[  291.602357] [drm:check_encoder_state], [ENCODER:11:TMDS-11]
>[  291.602361] [drm:check_encoder_state], [ENCODER:15:TMDS-15]
>[  291.602364] [drm:check_encoder_state], [ENCODER:17:TMDS-17]
>[  291.602368] [drm:check_encoder_state], [ENCODER:19:TMDS-19]
>[  291.602371] [drm:check_crtc_state], [CRTC:3]
>[  291.604343] [drm:check_crtc_state], [CRTC:6]
>[  294.424496] [drm:ironlake_panel_vdd_off_sync], Turning eDP VDD off
>[  294.424505] [drm:ironlake_panel_vdd_off_sync], PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007
>[  309.617320] usb 1-6.2: USB disconnect, device number 10
>[  311.073861] usb 1-6.2: new low-speed USB device number 11 using xhci_hcd
>[  311.094413] usb 1-6.2: New USB device found, idVendor=046d, idProduct=c05a
>[  311.098378] usb 1-6.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[  311.101235] usb 1-6.2: Product: USB Optical Mouse
>[  311.104076] usb 1-6.2: Manufacturer: Logitech
>[  311.108430] usb 1-6.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
>[  311.114635] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6.2/1-6.2:1.0/input/input13
>[  311.118225] hid-generic 0003:046D:C05A.0008: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-6.2/input0
>[  371.313229] usb 1-6.2: USB disconnect, device number 11
>[  372.770336] usb 1-6.2: new low-speed USB device number 12 using xhci_hcd
>[  372.791502] usb 1-6.2: New USB device found, idVendor=046d, idProduct=c05a
>[  372.795256] usb 1-6.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[  372.797984] usb 1-6.2: Product: USB Optical Mouse
>[  372.800734] usb 1-6.2: Manufacturer: Logitech
>[  372.806619] usb 1-6.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
>[  372.812979] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6.2/1-6.2:1.0/input/input14
>[  372.816513] hid-generic 0003:046D:C05A.0009: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-6.2/input0
>[  392.541897] [drm:i915_gem_open], 
>[  392.541953] [drm:intel_crtc_cursor_set], cursor off
>[  392.541960] [drm:intel_crtc_set_config], [CRTC:3] [FB:26] #connectors=1 (x y) (0 0)
>[  392.541967] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
>[  392.541972] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3]
>[  392.541976] [drm:intel_modeset_stage_output_state], [CONNECTOR:9:VGA-1] to [CRTC:6]
>[  392.541980] [drm:intel_crtc_cursor_set], cursor off
>[  392.541984] [drm:intel_crtc_set_config], [CRTC:6] [FB:26] #connectors=1 (x y) (0 0)
>[  392.541988] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:6], mode_changed=0, fb_changed=0
>[  392.541992] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3]
>[  392.541996] [drm:intel_modeset_stage_output_state], [CONNECTOR:9:VGA-1] to [CRTC:6]
>[  392.542016] [drm:i915_gem_open], 
>[  392.542141] [drm:valleyview_set_rps], GPU freq request from 375 MHz (201) to 708 MHz (217)
>[  392.543289] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 375 MHz (201)
>[  392.543774] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[5] ENCODERS[5]
>[  392.543789] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[5] ENCODERS[5]
>[  392.543809] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[5] ENCODERS[5]
>[  392.543814] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[5] ENCODERS[5]
>[  392.543823] [drm:drm_mode_getconnector], [CONNECTOR:20:?]
>[  392.543829] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:eDP-1]
>[  392.543834] [drm:intel_dp_detect], [CONNECTOR:20:eDP-1]
>[  392.543839] [drm:ironlake_edp_panel_vdd_on], Turning eDP VDD on
>[  392.543845] [drm:ironlake_edp_panel_vdd_on], PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f
>[  392.544009] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  392.554280] [drm:intel_dp_probe_oui], Sink OUI: 001cf8
>[  392.554436] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  392.565279] [drm:intel_dp_probe_oui], Branch OUI: 000000
>[  392.565297] [drm:drm_edid_to_eld], ELD: no CEA Extension found
>[  392.565304] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:eDP-1] probed modes :
>[  392.565310] [drm:drm_mode_debug_printmodeline], Modeline 21:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa
>[  392.565321] [drm:drm_mode_getconnector], [CONNECTOR:20:?]
>[  392.565337] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[5] ENCODERS[5]
>[  392.565343] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[5] ENCODERS[5]
>[  392.565375] [drm:drm_mode_addfb], [FB:33]
>[  392.640420] [drm:drm_mode_setcrtc], [CRTC:3]
>[  392.640432] [drm:drm_mode_setcrtc], [CONNECTOR:20:eDP-1]
>[  392.640438] [drm:intel_crtc_set_config], [CRTC:3] [FB:33] #connectors=1 (x y) (0 0)
>[  392.640443] [drm:intel_set_config_compute_mode_changes], modes are different, full mode set
>[  392.640449] [drm:drm_mode_debug_printmodeline], Modeline 25:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa
>[  392.640455] [drm:drm_mode_debug_printmodeline], Modeline 34:"800x600" 59 38250 800 832 912 1024 600 603 607 624 0x0 0x0
>[  392.640458] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=1, fb_changed=1
>[  392.640463] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3]
>[  392.640466] [drm:intel_modeset_stage_output_state], [CONNECTOR:9:VGA-1] to [CRTC:6]
>[  392.640472] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 1, prepare: 1, disable: 0
>[  392.640478] [drm:connected_sink_compute_bpp], [CONNECTOR:20:eDP-1] checking for sink bpp constrains
>[  392.640484] [drm:intel_dp_compute_config], DP link computation with max lane count 2 max bw 0a pixel clock 138780KHz
>[  392.640496] [drm:intel_dp_compute_config], DP link bw 0a lane count 2 clock 270000 bpp 24
>[  392.640499] [drm:intel_dp_compute_config], DP link bw required 333072 available 432000
>[  392.640504] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 24, dithering: 0
>[  392.640508] [drm:intel_dump_pipe_config], [CRTC:3][modeset] config for pipe A
>[  392.640511] [drm:intel_dump_pipe_config], cpu_transcoder: A
>[  392.640514] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0
>[  392.640518] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  392.640522] [drm:intel_dump_pipe_config], dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64
>[  392.640525] [drm:intel_dump_pipe_config], requested mode:
>[  392.640530] [drm:drm_mode_debug_printmodeline], Modeline 0:"800x600" 59 38250 800 832 912 1024 600 603 607 624 0x0 0x0
>[  392.640532] [drm:intel_dump_pipe_config], adjusted mode:
>[  392.640537] [drm:drm_mode_debug_printmodeline], Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa
>[  392.640542] [drm:intel_dump_crtc_timings], crtc timings: 138780 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x48 flags: 0xa
>[  392.640545] [drm:intel_dump_pipe_config], port clock: 270000
>[  392.640548] [drm:intel_dump_pipe_config], pipe src size: 800x600
>[  392.640552] [drm:intel_dump_pipe_config], gmch pfit: control: 0x88000000, ratios: 0x00000000, lvds border: 0x00000000
>[  392.640555] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[  392.640558] [drm:intel_dump_pipe_config], ips: 0
>[  392.640561] [drm:intel_dump_pipe_config], double wide: 0
>[  392.643280] [drm:valleyview_set_rps], GPU freq request from 375 MHz (201) to 167 MHz (191)
>[  392.650276] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0
>[  392.650282] [drm:ironlake_edp_backlight_off], 
>[  392.851999] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  392.862336] [drm:ironlake_edp_panel_off], Turn eDP power off
>[  392.862356] [drm:ironlake_wait_panel_off], Wait for panel power off time
>[  392.862377] [drm:ironlake_wait_panel_status], mask b000000f value 00000000 status e0000003 control abcd0008
>[  393.478717] [drm:ironlake_wait_panel_status], Wait complete
>[  393.506273] [drm:intel_dp_link_down], 
>[  393.558272] [drm:g4x_wait_for_vblank], vblank wait timed out
>[  393.609739] [drm:g4x_check_srwm], SR watermark: display plane 51, cursor 6
>[  393.609761] [drm:g4x_check_srwm], SR watermark: display plane 100, cursor 10
>[  393.609779] [drm:valleyview_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=150, cursor=6, SR: plane=51, cursor=10
>[  393.637283] [drm:i9xx_update_plane], Writing base 0085C000 00000000 0 0 3200
>[  393.637290] [drm:intel_edp_psr_match_conditions], PSR not supported on this platform
>[  393.637296] [drm:intel_crtc_mode_set], [ENCODER:19:TMDS-19] set [MODE:0:800x600]
>[  393.655274] [drm:intel_dp_init_panel_power_sequencer], cur t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000
>[  393.655279] [drm:intel_dp_init_panel_power_sequencer], vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000
>[  393.655283] [drm:intel_dp_init_panel_power_sequencer], panel power up delay 200, power down delay 50, power cycle delay 600
>[  393.655286] [drm:intel_dp_init_panel_power_sequencer], backlight on delay 1, off delay 200
>[  393.655292] [drm:intel_dp_init_panel_power_sequencer_registers], panel power sequencer register settings: PP_ON 0x87d0000a, PP_OFF 0x1f407d0, PP_DIV 0x270f06
>[  393.655521] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  393.666424] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  393.677422] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  393.702271] [drm:intel_dp_set_signal_levels], Using signal levels 00000000
>[  393.702523] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  393.713625] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  393.724282] [drm:intel_dp_start_link_train], clock recovery OK
>[  393.724286] [drm:ironlake_edp_panel_on], Turn eDP power on
>[  393.724290] [drm:ironlake_wait_panel_power_cycle], Wait for panel power cycle
>[  393.724295] [drm:ironlake_wait_panel_status], mask b800000f value 00000000 status 00000000 control abcd0008
>[  393.724298] [drm:ironlake_wait_panel_status], Wait complete
>[  393.724302] [drm:ironlake_wait_panel_on], Wait for panel power on
>[  393.724307] [drm:ironlake_wait_panel_status], mask b000000f value 80000008 status 0000000a control abcd000b
>[  393.808748] [drm:valleyview_set_rps], GPU freq request from 167 MHz (191) to 167 MHz (191)
>[  393.878691] [drm:ironlake_wait_panel_status], Wait complete
>[  393.878716] [drm:ironlake_panel_vdd_off_sync], Turning eDP VDD off
>[  393.878736] [drm:ironlake_panel_vdd_off_sync], PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0003
>[  393.879010] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  393.889855] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  393.914271] [drm:intel_dp_set_signal_levels], Using signal levels 00000000
>[  393.914420] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  393.925853] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  393.950270] [drm:intel_dp_set_signal_levels], Using signal levels 00000000
>[  393.950419] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  393.961853] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  393.986270] [drm:intel_dp_set_signal_levels], Using signal levels 00000000
>[  393.986419] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  393.997853] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  394.022270] [drm:intel_dp_set_signal_levels], Using signal levels 00000000
>[  394.022419] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  394.033854] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  394.058270] [drm:intel_dp_set_signal_levels], Using signal levels 00000000
>[  394.058420] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  394.069852] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  394.094270] [drm:intel_dp_set_signal_levels], Using signal levels 00000000
>[  394.094419] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  394.105852] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  394.116280] [drm:intel_dp_link_down], 
>[  394.168272] [drm:g4x_wait_for_vblank], vblank wait timed out
>[  394.219629] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  394.230423] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  394.255271] [drm:intel_dp_set_signal_levels], Using signal levels 00000000
>[  394.255428] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  394.266554] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  394.277279] [drm:intel_dp_start_link_train], clock recovery OK
>[  394.277435] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  394.288852] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  394.313270] [drm:intel_dp_set_signal_levels], Using signal levels 00000000
>[  394.313419] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  394.324852] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  394.349270] [drm:intel_dp_set_signal_levels], Using signal levels 00000000
>[  394.349419] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  394.360852] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  394.385270] [drm:intel_dp_set_signal_levels], Using signal levels 00000000
>[  394.385419] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  394.396853] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  394.421270] [drm:intel_dp_set_signal_levels], Using signal levels 00000000
>[  394.421419] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  394.432852] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  394.457270] [drm:intel_dp_set_signal_levels], Using signal levels 00000000
>[  394.457419] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  394.468852] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  394.493271] [drm:intel_dp_set_signal_levels], Using signal levels 00000000
>[  394.493421] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  394.504852] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  394.515279] [drm:intel_dp_link_down], 
>[  394.567271] [drm:g4x_wait_for_vblank], vblank wait timed out
>[  394.618995] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  394.629423] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  394.654270] [drm:intel_dp_set_signal_levels], Using signal levels 00000000
>[  394.654521] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  394.665552] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  394.676279] [drm:intel_dp_start_link_train], clock recovery OK
>[  394.676435] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  394.687852] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  394.712542] [drm:valleyview_set_rps], GPU freq request from 167 MHz (191) to 167 MHz (191)
>[  394.712609] [drm:intel_dp_set_signal_levels], Using signal levels 00000000
>[  394.712760] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  394.723851] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  394.748270] [drm:intel_dp_set_signal_levels], Using signal levels 00000000
>[  394.748420] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  394.759850] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  394.784270] [drm:intel_dp_set_signal_levels], Using signal levels 00000000
>[  394.784420] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  394.795848] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  394.820272] [drm:intel_dp_set_signal_levels], Using signal levels 00000000
>[  394.820422] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  394.831851] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  394.856270] [drm:intel_dp_set_signal_levels], Using signal levels 00000000
>[  394.856419] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  394.867851] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  394.892270] [drm:intel_dp_set_signal_levels], Using signal levels 00000000
>[  394.892420] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  394.903851] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  394.914279] [drm:intel_dp_link_down], 
>[  394.966272] [drm:g4x_wait_for_vblank], vblank wait timed out
>[  395.018013] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  395.028491] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  395.053270] [drm:intel_dp_set_signal_levels], Using signal levels 00000000
>[  395.053430] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  395.064552] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  395.075278] [drm:intel_dp_start_link_train], clock recovery OK
>[  395.075436] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  395.086851] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  395.111269] [drm:intel_dp_set_signal_levels], Using signal levels 00000000
>[  395.111419] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  395.122851] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  395.147270] [drm:intel_dp_set_signal_levels], Using signal levels 00000000
>[  395.147524] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  395.158853] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  395.183269] [drm:intel_dp_set_signal_levels], Using signal levels 00000000
>[  395.183419] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  395.194851] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  395.219270] [drm:intel_dp_set_signal_levels], Using signal levels 00000000
>[  395.219419] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  395.230850] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  395.255269] [drm:intel_dp_set_signal_levels], Using signal levels 00000000
>[  395.255419] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  395.266851] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  395.291269] [drm:intel_dp_set_signal_levels], Using signal levels 00000000
>[  395.291419] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  395.302850] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  395.313278] [drm:intel_dp_link_down], 
>[  395.365271] [drm:g4x_wait_for_vblank], vblank wait timed out
>[  395.417023] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  395.427421] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  395.452270] [drm:intel_dp_set_signal_levels], Using signal levels 00000000
>[  395.452429] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  395.463552] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  395.474278] [drm:intel_dp_start_link_train], clock recovery OK
>[  395.474435] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  395.485851] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  395.510269] [drm:intel_dp_set_signal_levels], Using signal levels 00000000
>[  395.510419] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  395.521850] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  395.546270] [drm:intel_dp_set_signal_levels], Using signal levels 00000000
>[  395.546420] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  395.557851] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  395.582269] [drm:intel_dp_set_signal_levels], Using signal levels 00000000
>[  395.582514] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  395.593851] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  395.618269] [drm:intel_dp_set_signal_levels], Using signal levels 00000000
>[  395.618419] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  395.629850] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  395.654269] [drm:intel_dp_set_signal_levels], Using signal levels 00000000
>[  395.654419] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  395.665850] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  395.690269] [drm:intel_dp_set_signal_levels], Using signal levels 00000000
>[  395.690419] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  395.701852] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  395.712281] [drm:intel_dp_link_down], 
>[  395.764269] [drm:g4x_wait_for_vblank], vblank wait timed out
>[  395.815981] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  395.826417] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  395.851272] [drm:intel_dp_set_signal_levels], Using signal levels 00000000
>[  395.851429] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  395.862552] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  395.873278] [drm:intel_dp_start_link_train], clock recovery OK
>[  395.873434] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  395.884851] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  395.909269] [drm:intel_dp_set_signal_levels], Using signal levels 00000000
>[  395.909418] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  395.920851] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  395.945269] [drm:intel_dp_set_signal_levels], Using signal levels 00000000
>[  395.945418] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  395.956851] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  395.981269] [drm:intel_dp_set_signal_levels], Using signal levels 00000000
>[  395.981418] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  395.992852] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  396.017270] [drm:intel_dp_set_signal_levels], Using signal levels 00000000
>[  396.017419] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  396.028851] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  396.053269] [drm:intel_dp_set_signal_levels], Using signal levels 00000000
>[  396.053418] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  396.064854] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  396.089269] [drm:intel_dp_set_signal_levels], Using signal levels 00000000
>[  396.089418] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  396.100851] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  396.111278] [drm:intel_dp_link_down], 
>[  396.163271] [drm:g4x_wait_for_vblank], vblank wait timed out
>[  396.215019] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  396.225422] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  396.250269] [drm:intel_dp_set_signal_levels], Using signal levels 00000000
>[  396.250427] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  396.261552] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  396.272278] [drm:intel_dp_start_link_train], clock recovery OK
>[  396.272434] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  396.283277] [drm:intel_dp_complete_link_train] *ERROR* failed to train DP, aborting
>[  396.283283] [drm:intel_dp_link_down], 
>[  396.335271] [drm:g4x_wait_for_vblank], vblank wait timed out
>[  396.387021] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  396.397329] [drm:valleyview_update_wm], Setting FIFO watermarks - A: plane=201, cursor=6, B: plane=150, cursor=6, SR: plane=0, cursor=0
>[  396.431271] [drm:ironlake_edp_backlight_on], 
>[  396.433273] [drm:intel_panel_enable_backlight], pipe A
>[  396.433278] [drm:intel_panel_actually_set_backlight], set backlight PWM = 7812
>[  396.433287] [drm:intel_connector_check_state], [CONNECTOR:20:eDP-1]
>[  396.433292] [drm:intel_connector_check_state], [CONNECTOR:9:VGA-1]
>[  396.433299] [drm:check_encoder_state], [ENCODER:10:DAC-10]
>[  396.433303] [drm:check_encoder_state], [ENCODER:11:TMDS-11]
>[  396.433307] [drm:check_encoder_state], [ENCODER:15:TMDS-15]
>[  396.433310] [drm:check_encoder_state], [ENCODER:17:TMDS-17]
>[  396.433314] [drm:check_encoder_state], [ENCODER:19:TMDS-19]
>[  396.433318] [drm:check_crtc_state], [CRTC:3]
>[  396.435276] [drm:check_crtc_state], [CRTC:6]
>[  396.437306] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[5] ENCODERS[5]
>[  396.437315] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[5] ENCODERS[5]
>[  396.437324] [drm:drm_mode_getconnector], [CONNECTOR:9:?]
>[  396.437329] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1]
>[  396.437334] [drm:intel_crt_detect], [CONNECTOR:9:VGA-1] force=1
>[  396.437337] [drm:valleyview_crt_detect_hotplug], trigger hotplug detect cycle: adpa=0xc3f40000
>[  396.447269] [drm:valleyview_crt_detect_hotplug], valleyview hotplug adpa=0xc3f40000, result 1
>[  396.447273] [drm:intel_crt_detect], CRT detected via hotplug
>[  396.459728] [drm:drm_edid_to_eld], ELD: no CEA Extension found
>[  396.459749] [drm:drm_mode_debug_printmodeline], Modeline 30:"848x480" 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
>[  396.459752] [drm:drm_mode_prune_invalid], Not using 848x480 mode -3
>[  396.459758] [drm:drm_mode_debug_printmodeline], Modeline 27:"640x480" 60 25175 640 656 752 800 480 489 492 525 0x40 0xa
>[  396.459761] [drm:drm_mode_prune_invalid], Not using 640x480 mode -3
>[  396.459769] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] probed modes :
>[  396.459775] [drm:drm_mode_debug_printmodeline], Modeline 35:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
>[  396.459780] [drm:drm_mode_debug_printmodeline], Modeline 41:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6
>[  396.459785] [drm:drm_mode_debug_printmodeline], Modeline 50:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[  396.459790] [drm:drm_mode_debug_printmodeline], Modeline 38:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[  396.459795] [drm:drm_mode_debug_printmodeline], Modeline 40:"1440x900" 75 136750 1440 1536 1688 1936 900 903 909 942 0x40 0x6
>[  396.459800] [drm:drm_mode_debug_printmodeline], Modeline 36:"1440x900" 60 106500 1440 1520 1672 1904 900 903 909 934 0x40 0x6
>[  396.459805] [drm:drm_mode_debug_printmodeline], Modeline 37:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
>[  396.459810] [drm:drm_mode_debug_printmodeline], Modeline 42:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
>[  396.459815] [drm:drm_mode_debug_printmodeline], Modeline 39:"1280x720" 60 74440 1280 1336 1472 1664 720 721 724 746 0x0 0x6
>[  396.459821] [drm:drm_mode_debug_printmodeline], Modeline 51:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[  396.459826] [drm:drm_mode_debug_printmodeline], Modeline 52:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
>[  396.459831] [drm:drm_mode_debug_printmodeline], Modeline 31:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[  396.459836] [drm:drm_mode_debug_printmodeline], Modeline 54:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
>[  396.459841] [drm:drm_mode_debug_printmodeline], Modeline 55:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
>[  396.459846] [drm:drm_mode_debug_printmodeline], Modeline 56:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5
>[  396.459851] [drm:drm_mode_debug_printmodeline], Modeline 29:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[  396.459856] [drm:drm_mode_debug_printmodeline], Modeline 28:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
>[  396.459861] [drm:drm_mode_debug_printmodeline], Modeline 45:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
>[  396.459866] [drm:drm_mode_debug_printmodeline], Modeline 46:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa
>[  396.459871] [drm:drm_mode_debug_printmodeline], Modeline 47:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa
>[  396.459876] [drm:drm_mode_debug_printmodeline], Modeline 48:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[  396.459881] [drm:drm_mode_debug_printmodeline], Modeline 49:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[  396.459893] [drm:drm_mode_getconnector], [CONNECTOR:9:?]
>[  396.459911] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[5] ENCODERS[5]
>[  396.459917] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[5] ENCODERS[5]
>[  396.459949] [drm:drm_mode_addfb], [FB:27]
>[  396.521088] [drm:drm_mode_setcrtc], [CRTC:6]
>[  396.521100] [drm:drm_mode_setcrtc], [CONNECTOR:9:VGA-1]
>[  396.521106] [drm:intel_crtc_set_config], [CRTC:6] [FB:27] #connectors=1 (x y) (0 0)
>[  396.521111] [drm:intel_set_config_compute_mode_changes], modes are different, full mode set
>[  396.521117] [drm:drm_mode_debug_printmodeline], Modeline 32:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[  396.521122] [drm:drm_mode_debug_printmodeline], Modeline 30:"800x600" 59 38250 800 832 912 1024 600 603 607 624 0x0 0x0
>[  396.521126] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:6], mode_changed=1, fb_changed=1
>[  396.521131] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3]
>[  396.521135] [drm:intel_modeset_stage_output_state], [CONNECTOR:9:VGA-1] to [CRTC:6]
>[  396.521140] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 2, prepare: 2, disable: 0
>[  396.521145] [drm:connected_sink_compute_bpp], [CONNECTOR:9:VGA-1] checking for sink bpp constrains
>[  396.521150] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 24, dithering: 0
>[  396.521154] [drm:intel_dump_pipe_config], [CRTC:6][modeset] config for pipe B
>[  396.521156] [drm:intel_dump_pipe_config], cpu_transcoder: B
>[  396.521159] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0
>[  396.521163] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  396.521167] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  396.521170] [drm:intel_dump_pipe_config], requested mode:
>[  396.521175] [drm:drm_mode_debug_printmodeline], Modeline 0:"800x600" 59 38250 800 832 912 1024 600 603 607 624 0x0 0x0
>[  396.521178] [drm:intel_dump_pipe_config], adjusted mode:
>[  396.521182] [drm:drm_mode_debug_printmodeline], Modeline 0:"800x600" 59 38250 800 832 912 1024 600 603 607 624 0x0 0xa
>[  396.521187] [drm:intel_dump_crtc_timings], crtc timings: 38250 800 832 912 1024 600 603 607 624, type: 0x0 flags: 0xa
>[  396.521190] [drm:intel_dump_pipe_config], port clock: 38250
>[  396.521193] [drm:intel_dump_pipe_config], pipe src size: 800x600
>[  396.521196] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[  396.521200] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[  396.521203] [drm:intel_dump_pipe_config], ips: 0
>[  396.521205] [drm:intel_dump_pipe_config], double wide: 0
>[  396.546274] [drm:g4x_check_srwm], SR watermark: display plane 52, cursor 6
>[  396.546280] [drm:g4x_check_srwm], SR watermark: display plane 102, cursor 10
>[  396.546284] [drm:valleyview_update_wm], Setting FIFO watermarks - A: plane=201, cursor=6, B: plane=2, cursor=2, SR: plane=52, cursor=10
>[  396.592278] [drm:i9xx_update_plane], Writing base 00A31000 00000000 0 0 3200
>[  396.592291] [drm:intel_edp_psr_match_conditions], PSR not supported on this platform
>[  396.592297] [drm:intel_crtc_mode_set], [ENCODER:10:DAC-10] set [MODE:0:800x600]
>[  396.592951] [drm:valleyview_update_wm], Setting FIFO watermarks - A: plane=201, cursor=6, B: plane=169, cursor=6, SR: plane=0, cursor=0
>[  396.628275] [drm:intel_connector_check_state], [CONNECTOR:20:eDP-1]
>[  396.628281] [drm:intel_connector_check_state], [CONNECTOR:9:VGA-1]
>[  396.628287] [drm:check_encoder_state], [ENCODER:10:DAC-10]
>[  396.628291] [drm:check_encoder_state], [ENCODER:11:TMDS-11]
>[  396.628294] [drm:check_encoder_state], [ENCODER:15:TMDS-15]
>[  396.628298] [drm:check_encoder_state], [ENCODER:17:TMDS-17]
>[  396.628302] [drm:check_encoder_state], [ENCODER:19:TMDS-19]
>[  396.628305] [drm:check_crtc_state], [CRTC:3]
>[  396.630275] [drm:check_crtc_state], [CRTC:6]
>[  396.632288] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[5] ENCODERS[5]
>[  396.632296] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[5] ENCODERS[5]
>[  396.632304] [drm:drm_mode_getconnector], [CONNECTOR:12:?]
>[  396.632310] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1]
>[  396.632314] [drm:intel_hdmi_detect], [CONNECTOR:12:HDMI-A-1]
>[  396.632464] [drm:gmbus_xfer], GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
>[  396.632469] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb
>[  396.632473] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] disconnected
>[  396.632480] [drm:drm_mode_getconnector], [CONNECTOR:12:?]
>[  396.632483] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1]
>[  396.632487] [drm:intel_hdmi_detect], [CONNECTOR:12:HDMI-A-1]
>[  396.632635] [drm:gmbus_xfer], GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
>[  396.632639] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb
>[  396.632643] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] disconnected
>[  396.632654] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[5] ENCODERS[5]
>[  396.632660] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[5] ENCODERS[5]
>[  396.632666] [drm:drm_mode_getconnector], [CONNECTOR:16:?]
>[  396.632670] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-1]
>[  396.632674] [drm:intel_dp_detect], [CONNECTOR:16:DP-1]
>[  396.632678] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-1] disconnected
>[  396.632683] [drm:drm_mode_getconnector], [CONNECTOR:16:?]
>[  396.632686] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-1]
>[  396.632690] [drm:intel_dp_detect], [CONNECTOR:16:DP-1]
>[  396.632694] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-1] disconnected
>[  396.632701] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[5] ENCODERS[5]
>[  396.632706] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[5] ENCODERS[5]
>[  396.632712] [drm:drm_mode_getconnector], [CONNECTOR:18:?]
>[  396.632715] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2]
>[  396.632719] [drm:intel_hdmi_detect], [CONNECTOR:18:HDMI-A-2]
>[  396.632866] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[  396.632870] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
>[  396.632873] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] disconnected
>[  396.632879] [drm:drm_mode_getconnector], [CONNECTOR:18:?]
>[  396.632883] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2]
>[  396.632886] [drm:intel_hdmi_detect], [CONNECTOR:18:HDMI-A-2]
>[  396.633033] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[  396.633037] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
>[  396.633040] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] disconnected
>[  396.709086] [drm:valleyview_set_rps], GPU freq request from 167 MHz (191) to 167 MHz (191)
>[  404.962649] [drm:intel_crtc_set_config], [CRTC:3] [FB:26] #connectors=1 (x y) (0 0)
>[  404.962654] [drm:intel_set_config_compute_mode_changes], modes are different, full mode set
>[  404.962658] [drm:drm_mode_debug_printmodeline], Modeline 34:"800x600" 59 38250 800 832 912 1024 600 603 607 624 0x0 0x0
>[  404.962662] [drm:drm_mode_debug_printmodeline], Modeline 25:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa
>[  404.962664] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=1, fb_changed=1
>[  404.962668] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3]
>[  404.962670] [drm:intel_modeset_stage_output_state], [CONNECTOR:9:VGA-1] to [CRTC:6]
>[  404.962674] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 1, prepare: 1, disable: 0
>[  404.962678] [drm:connected_sink_compute_bpp], [CONNECTOR:20:eDP-1] checking for sink bpp constrains
>[  404.962683] [drm:intel_dp_compute_config], DP link computation with max lane count 2 max bw 0a pixel clock 138780KHz
>[  404.962692] [drm:intel_dp_compute_config], DP link bw 0a lane count 2 clock 270000 bpp 24
>[  404.962694] [drm:intel_dp_compute_config], DP link bw required 333072 available 432000
>[  404.962697] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 24, dithering: 0
>[  404.962699] [drm:intel_dump_pipe_config], [CRTC:3][modeset] config for pipe A
>[  404.962701] [drm:intel_dump_pipe_config], cpu_transcoder: A
>[  404.962702] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0
>[  404.962705] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  404.962708] [drm:intel_dump_pipe_config], dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64
>[  404.962709] [drm:intel_dump_pipe_config], requested mode:
>[  404.962713] [drm:drm_mode_debug_printmodeline], Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa
>[  404.962714] [drm:intel_dump_pipe_config], adjusted mode:
>[  404.962717] [drm:drm_mode_debug_printmodeline], Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa
>[  404.962720] [drm:intel_dump_crtc_timings], crtc timings: 138780 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x48 flags: 0xa
>[  404.962722] [drm:intel_dump_pipe_config], port clock: 270000
>[  404.962723] [drm:intel_dump_pipe_config], pipe src size: 1920x1080
>[  404.962725] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[  404.962727] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[  404.962729] [drm:intel_dump_pipe_config], ips: 0
>[  404.962730] [drm:intel_dump_pipe_config], double wide: 0
>[  404.970269] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0
>[  404.970273] [drm:ironlake_edp_backlight_off], 
>[  405.171961] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  405.182272] [drm:ironlake_edp_panel_off], Turn eDP power off
>[  405.182274] [drm:ironlake_wait_panel_off], Wait for panel power off time
>[  405.182278] [drm:ironlake_wait_panel_status], mask b000000f value 00000000 status 80000008 control abcd0000
>[  405.373232] [drm:valleyview_irq_handler], hotplug event received, stat 0x00100000
>[  405.373235] [drm:intel_hpd_irq_handler], Received HPD interrupt on PIN 5 - cnt: 0
>[  405.776710] [drm:ironlake_wait_panel_status], Wait complete
>[  405.798265] [drm:i9xx_pfit_disable], disabling pfit, current: 0x88000000
>[  405.798268] [drm:intel_dp_link_down], 
>[  405.850262] [drm:g4x_wait_for_vblank], vblank wait timed out
>[  405.901270] [drm:g4x_check_srwm], SR watermark: display plane 31, cursor 6
>[  405.901272] [drm:g4x_check_srwm], SR watermark: display plane 52, cursor 6
>[  405.901275] [drm:valleyview_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=169, cursor=6, SR: plane=31, cursor=6
>[  405.931272] [drm:i9xx_update_plane], Writing base 0006E000 00000000 0 0 7680
>[  405.931277] [drm:intel_edp_psr_match_conditions], PSR not supported on this platform
>[  405.931281] [drm:intel_crtc_mode_set], [ENCODER:19:TMDS-19] set [MODE:0:1920x1080]
>[  405.949267] [drm:intel_dp_init_panel_power_sequencer], cur t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000
>[  405.949270] [drm:intel_dp_init_panel_power_sequencer], vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000
>[  405.949272] [drm:intel_dp_init_panel_power_sequencer], panel power up delay 200, power down delay 50, power cycle delay 600
>[  405.949274] [drm:intel_dp_init_panel_power_sequencer], backlight on delay 1, off delay 200
>[  405.949278] [drm:intel_dp_init_panel_power_sequencer_registers], panel power sequencer register settings: PP_ON 0x87d0000a, PP_OFF 0x1f407d0, PP_DIV 0x270f06
>[  405.949281] [drm:ironlake_edp_panel_vdd_on], Turning eDP VDD on
>[  405.949283] [drm:ironlake_wait_panel_power_cycle], Wait for panel power cycle
>[  405.949286] [drm:ironlake_wait_panel_status], mask b800000f value 00000000 status 00000000 control abcd0000
>[  405.949288] [drm:ironlake_wait_panel_status], Wait complete
>[  405.949291] [drm:ironlake_edp_panel_vdd_on], PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0008
>[  405.949293] [drm:ironlake_edp_panel_vdd_on], eDP was not running
>[  405.979696] [drm:valleyview_irq_handler], hotplug event received, stat 0x10100000
>[  405.979698] [drm:intel_hpd_irq_handler], Received HPD interrupt on PIN 5 - cnt: 1
>[  406.150998] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  406.161413] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  406.172410] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  406.197263] [drm:intel_dp_set_signal_levels], Using signal levels 00000000
>[  406.197420] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  406.208543] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  406.219269] [drm:intel_dp_start_link_train], clock recovery OK
>[  406.219271] [drm:ironlake_edp_panel_on], Turn eDP power on
>[  406.219273] [drm:ironlake_wait_panel_power_cycle], Wait for panel power cycle
>[  406.219277] [drm:ironlake_wait_panel_status], mask b800000f value 00000000 status 00000000 control abcd0008
>[  406.219278] [drm:ironlake_wait_panel_status], Wait complete
>[  406.219281] [drm:ironlake_wait_panel_on], Wait for panel power on
>[  406.219284] [drm:ironlake_wait_panel_status], mask b000000f value 80000008 status 0000000a control abcd000b
>[  406.373402] [drm:ironlake_wait_panel_status], Wait complete
>[  406.373405] [drm:ironlake_panel_vdd_off_sync], Turning eDP VDD off
>[  406.373409] [drm:ironlake_panel_vdd_off_sync], PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0003
>[  406.373564] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  406.384842] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  406.395270] [drm:intel_dp_complete_link_train], Channel EQ done. DP Training successful
>[  406.395406] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  406.406317] [drm:valleyview_update_wm], Setting FIFO watermarks - A: plane=61, cursor=6, B: plane=169, cursor=6, SR: plane=0, cursor=0
>[  406.440264] [drm:ironlake_edp_backlight_on], 
>[  406.442265] [drm:intel_panel_enable_backlight], pipe A
>[  406.442268] [drm:intel_panel_actually_set_backlight], set backlight PWM = 7812
>[  406.442276] [drm:intel_connector_check_state], [CONNECTOR:20:eDP-1]
>[  406.442280] [drm:intel_connector_check_state], [CONNECTOR:9:VGA-1]
>[  406.442285] [drm:check_encoder_state], [ENCODER:10:DAC-10]
>[  406.442288] [drm:check_encoder_state], [ENCODER:11:TMDS-11]
>[  406.442290] [drm:check_encoder_state], [ENCODER:15:TMDS-15]
>[  406.442292] [drm:check_encoder_state], [ENCODER:17:TMDS-17]
>[  406.442294] [drm:check_encoder_state], [ENCODER:19:TMDS-19]
>[  406.442296] [drm:check_crtc_state], [CRTC:3]
>[  406.444268] [drm:check_crtc_state], [CRTC:6]
>[  406.446271] [drm:intel_crtc_set_config], [CRTC:6] [FB:26] #connectors=1 (x y) (0 0)
>[  406.446274] [drm:intel_set_config_compute_mode_changes], modes are different, full mode set
>[  406.446278] [drm:drm_mode_debug_printmodeline], Modeline 30:"800x600" 59 38250 800 832 912 1024 600 603 607 624 0x0 0x0
>[  406.446282] [drm:drm_mode_debug_printmodeline], Modeline 32:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[  406.446283] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:6], mode_changed=1, fb_changed=1
>[  406.446286] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3]
>[  406.446288] [drm:intel_modeset_stage_output_state], [CONNECTOR:9:VGA-1] to [CRTC:6]
>[  406.446291] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 2, prepare: 2, disable: 0
>[  406.446295] [drm:connected_sink_compute_bpp], [CONNECTOR:9:VGA-1] checking for sink bpp constrains
>[  406.446298] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 24, dithering: 0
>[  406.446301] [drm:intel_dump_pipe_config], [CRTC:6][modeset] config for pipe B
>[  406.446302] [drm:intel_dump_pipe_config], cpu_transcoder: B
>[  406.446304] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0
>[  406.446306] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  406.446308] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  406.446310] [drm:intel_dump_pipe_config], requested mode:
>[  406.446313] [drm:drm_mode_debug_printmodeline], Modeline 0:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[  406.446314] [drm:intel_dump_pipe_config], adjusted mode:
>[  406.446318] [drm:drm_mode_debug_printmodeline], Modeline 0:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[  406.446321] [drm:intel_dump_crtc_timings], crtc timings: 65000 1024 1048 1184 1344 768 771 777 806, type: 0x40 flags: 0xa
>[  406.446323] [drm:intel_dump_pipe_config], port clock: 65000
>[  406.446324] [drm:intel_dump_pipe_config], pipe src size: 1024x768
>[  406.446326] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[  406.446328] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[  406.446329] [drm:intel_dump_pipe_config], ips: 0
>[  406.446331] [drm:intel_dump_pipe_config], double wide: 0
>[  406.474266] [drm:g4x_check_srwm], SR watermark: display plane 107, cursor 6
>[  406.474268] [drm:g4x_check_srwm], SR watermark: display plane 211, cursor 10
>[  406.474271] [drm:valleyview_update_wm], Setting FIFO watermarks - A: plane=61, cursor=6, B: plane=2, cursor=2, SR: plane=107, cursor=10
>[  406.520271] [drm:i9xx_update_plane], Writing base 0006E000 00000000 0 0 7680
>[  406.520276] [drm:intel_edp_psr_match_conditions], PSR not supported on this platform
>[  406.520279] [drm:intel_crtc_mode_set], [ENCODER:10:DAC-10] set [MODE:0:1024x768]
>[  406.520931] [drm:valleyview_update_wm], Setting FIFO watermarks - A: plane=61, cursor=6, B: plane=150, cursor=6, SR: plane=0, cursor=0
>[  406.556265] [drm:intel_connector_check_state], [CONNECTOR:20:eDP-1]
>[  406.556268] [drm:intel_connector_check_state], [CONNECTOR:9:VGA-1]
>[  406.556271] [drm:check_encoder_state], [ENCODER:10:DAC-10]
>[  406.556273] [drm:check_encoder_state], [ENCODER:11:TMDS-11]
>[  406.556276] [drm:check_encoder_state], [ENCODER:15:TMDS-15]
>[  406.556278] [drm:check_encoder_state], [ENCODER:17:TMDS-17]
>[  406.556280] [drm:check_encoder_state], [ENCODER:19:TMDS-19]
>[  406.556282] [drm:check_crtc_state], [CRTC:3]
>[  406.558268] [drm:check_crtc_state], [CRTC:6]
>[  406.560275] [drm:i915_hotplug_work_func], running encoder hotplug functions
>[  406.560278] [drm:i915_hotplug_work_func], Connector eDP-1 (pin 5) received hotplug event.
>[  406.560280] [drm:i915_hotplug_work_func], Connector HDMI-A-2 (pin 5) received hotplug event.
>[  406.560457] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  406.571522] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  406.582271] [drm:intel_dp_get_dpcd], DPCD: 12 0a 82 41 00 00 01 80 02 00 00 00 0f 0b 00
>[  406.582415] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  406.593268] [drm:intel_dp_get_dpcd], Detected EDP PSR Panel.
>[  406.593404] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  406.604402] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  406.615269] [drm:intel_dp_detect], [CONNECTOR:20:eDP-1]
>[  406.615272] [drm:ironlake_edp_panel_vdd_on], Turning eDP VDD on
>[  406.615276] [drm:ironlake_edp_panel_vdd_on], PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f
>[  406.615428] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  406.626269] [drm:intel_dp_probe_oui], Sink OUI: 001cf8
>[  406.626421] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020
>[  406.637268] [drm:intel_dp_probe_oui], Branch OUI: 000000
>[  406.637275] [drm:intel_hdmi_detect], [CONNECTOR:18:HDMI-A-2]
>[  406.637422] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[  406.637424] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
>[  406.637431] [drm:i915_hotplug_work_func], running encoder hotplug functions
>[  406.652043] [drm:i915_gem_open], 
>[  406.652096] [drm:i915_gem_open], 
>[  406.652197] [drm:valleyview_set_rps], GPU freq request from 167 MHz (191) to 708 MHz (217)
>[  406.654599] [drm:intel_crtc_cursor_set], cursor off
>[  406.654608] [drm:intel_crtc_set_config], [CRTC:3] [FB:26] #connectors=1 (x y) (0 0)
>[  406.654617] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
>[  406.654622] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3]
>[  406.654626] [drm:intel_modeset_stage_output_state], [CONNECTOR:9:VGA-1] to [CRTC:6]
>[  406.654630] [drm:intel_crtc_cursor_set], cursor off
>[  406.654634] [drm:intel_crtc_set_config], [CRTC:6] [FB:26] #connectors=1 (x y) (0 0)
>[  406.654638] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:6], mode_changed=0, fb_changed=0
>[  406.654642] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3]
>[  406.654646] [drm:intel_modeset_stage_output_state], [CONNECTOR:9:VGA-1] to [CRTC:6]
>[  406.655854] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 375 MHz (201)
>[  406.753884] [drm:valleyview_set_rps], GPU freq request from 375 MHz (201) to 167 MHz (191)
>[  407.804739] [drm:valleyview_set_rps], GPU freq request from 167 MHz (191) to 167 MHz (191)
>[  408.705349] [drm:valleyview_set_rps], GPU freq request from 167 MHz (191) to 167 MHz (191)
>[  409.648712] [drm:ironlake_panel_vdd_off_sync], Turning eDP VDD off
>[  409.648742] [drm:ironlake_panel_vdd_off_sync], PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007
>[  410.705086] [drm:valleyview_set_rps], GPU freq request from 167 MHz (191) to 167 MHz (191)
>[  433.009237] usb 1-6.2: USB disconnect, device number 12
>[  434.466780] usb 1-6.2: new low-speed USB device number 13 using xhci_hcd
>[  434.488538] usb 1-6.2: New USB device found, idVendor=046d, idProduct=c05a
>[  434.492055] usb 1-6.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[  434.495287] usb 1-6.2: Product: USB Optical Mouse
>[  434.498538] usb 1-6.2: Manufacturer: Logitech
>[  434.503343] usb 1-6.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
>[  434.510037] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6.2/1-6.2:1.0/input/input15
>[  434.515014] hid-generic 0003:046D:C05A.000A: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-6.2/input0

Actions: View

Attachments on bug 72752: 90850 | 91806 | 91832 | 91833

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.