Attachment 99465 Details for Bug 78948 – dmesg

dmesg

pm_rpm_system-suspend.dmesg (text/plain), 90.95 KB, created by Guo Jinxian on 2014-05-21 05:20:35 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Guo Jinxian

Created: 2014-05-21 05:20:35 UTC

Size: 90.95 KB

patch

obsolete

>[    0.000000] Initializing cgroup subsys cpuset
>[    0.000000] Initializing cgroup subsys cpu
>[    0.000000] Initializing cgroup subsys cpuacct
>[    0.000000] Linux version 3.14.0_kcloud_1d7da0_20140521+ (root@x-kcloud3) (gcc version 4.8.2 20131212 (Red Hat 4.8.2-7) (GCC) ) #32 SMP Wed May 21 13:11:30 EDT 2014
>[    0.000000] Command line: BOOT_IMAGE=kernels//kcloud/1d7da0e3acb333320b2440d7ccc141a5c5116b0d/bzImage_x86_64 root=/dev/sda2 drm.debug=0xe modules_path=kernels//kcloud/1d7da0e3acb333320b2440d7ccc141a5c5116b0d/modules_x86_64/lib/modules/3.14.0_kcloud_1d7da0_20140521+ acpi_rsdp=0xab7e1014 kexec_jump_back_entry=0x00027f7e
>[    0.000000] e820: BIOS-provided physical RAM map:
>[    0.000000] BIOS-e820: [mem 0x0000000000000100-0x0000000000057fff] usable
>[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable
>[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000a7f0afff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000a7f0b000-0x00000000a7f28fff] ACPI data
>[    0.000000] BIOS-e820: [mem 0x00000000a7f29000-0x00000000aaf4dfff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000aaf4e000-0x00000000ab5b5fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000ab5b6000-0x00000000ab7b5fff] ACPI NVS
>[    0.000000] BIOS-e820: [mem 0x00000000ab7b6000-0x00000000ab7e1fff] ACPI data
>[    0.000000] BIOS-e820: [mem 0x00000000ab7e2000-0x00000000ab7fefff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000014f7fffff] usable
>[    0.000000] NX (Execute Disable) protection: active
>[    0.000000] DMI not present or invalid.
>[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
>[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
>[    0.000000] No AGP bridge found
>[    0.000000] e820: last_pfn = 0x14f800 max_arch_pfn = 0x400000000
>[    0.000000] MTRR default type: write-back
>[    0.000000] MTRR fixed ranges enabled:
>[    0.000000]   00000-9FFFF write-back
>[    0.000000]   A0000-BFFFF uncachable
>[    0.000000]   C0000-FFFFF write-protect
>[    0.000000] MTRR variable ranges enabled:
>[    0.000000]   0 base 00C0000000 mask 7FC0000000 uncachable
>[    0.000000]   1 base 00B0000000 mask 7FF0000000 uncachable
>[    0.000000]   2 base 00AE000000 mask 7FFE000000 uncachable
>[    0.000000]   3 base 00AD000000 mask 7FFF000000 uncachable
>[    0.000000]   4 disabled
>[    0.000000]   5 disabled
>[    0.000000]   6 disabled
>[    0.000000]   7 disabled
>[    0.000000]   8 disabled
>[    0.000000]   9 disabled
>[    0.000000] x86 PAT enabled: cpu 0, old 0x7010600070106, new 0x7010600070106
>[    0.000000] e820: last_pfn = 0xab7ff max_arch_pfn = 0x400000000
>[    0.000000] Base memory trampoline at [ffff880000094000] 94000 size 24576
>[    0.000000] Using GB pages for direct mapping
>[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
>[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
>[    0.000000] BRK [0x031dd000, 0x031ddfff] PGTABLE
>[    0.000000] BRK [0x031de000, 0x031defff] PGTABLE
>[    0.000000] BRK [0x031df000, 0x031dffff] PGTABLE
>[    0.000000] init_memory_mapping: [mem 0x14f600000-0x14f7fffff]
>[    0.000000]  [mem 0x14f600000-0x14f7fffff] page 2M
>[    0.000000] BRK [0x031e0000, 0x031e0fff] PGTABLE
>[    0.000000] init_memory_mapping: [mem 0x14c000000-0x14f5fffff]
>[    0.000000]  [mem 0x14c000000-0x14f5fffff] page 2M
>[    0.000000] init_memory_mapping: [mem 0x100000000-0x14bffffff]
>[    0.000000]  [mem 0x100000000-0x13fffffff] page 1G
>[    0.000000]  [mem 0x140000000-0x14bffffff] page 2M
>[    0.000000] init_memory_mapping: [mem 0x00100000-0xa7f0afff]
>[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
>[    0.000000]  [mem 0x00200000-0x3fffffff] page 2M
>[    0.000000]  [mem 0x40000000-0x7fffffff] page 1G
>[    0.000000]  [mem 0x80000000-0xa7dfffff] page 2M
>[    0.000000]  [mem 0xa7e00000-0xa7f0afff] page 4k
>[    0.000000] init_memory_mapping: [mem 0xa7f29000-0xaaf4dfff]
>[    0.000000]  [mem 0xa7f29000-0xa7ffffff] page 4k
>[    0.000000]  [mem 0xa8000000-0xaadfffff] page 2M
>[    0.000000]  [mem 0xaae00000-0xaaf4dfff] page 4k
>[    0.000000] BRK [0x031e1000, 0x031e1fff] PGTABLE
>[    0.000000] init_memory_mapping: [mem 0xab7e2000-0xab7fefff]
>[    0.000000]  [mem 0xab7e2000-0xab7fefff] page 4k
>[    0.000000] BRK [0x031e2000, 0x031e2fff] PGTABLE
>[    0.000000] ACPI: RSDP 00000000ab7e1014 000024 (v02 INTEL )
>[    0.000000] ACPI: XSDT 00000000ab7c9188 000114 (v01 INTEL   BDW-ULT 00000000      01000013)
>[    0.000000] ACPI: FACP 00000000ab7d7000 0000F4 (v05 INTEL   BDW-ULT 00000000 MSFT 0000005F)
>[    0.000000] ACPI: DSDT 00000000a7f0b000 01DFE9 (v02 INTEL  BDW      00000000 INTL 20130927)
>[    0.000000] ACPI: FACS 00000000ab799000 000040
>[    0.000000] ACPI: TCPA 00000000ab7df000 000032 (v02 INTEL  EDK2     00000002      01000013)
>[    0.000000] ACPI: UEFI 00000000ab79c000 000042 (v01 INTEL  EDK2     00000002      01000013)
>[    0.000000] ACPI: SSDT 00000000ab7de000 0004B5 (v01 Intel_ Tpm2Tabl 00001000 INTL 20130927)
>[    0.000000] ACPI: SSDT 00000000ab7dd000 00004E (v01 MeSsdt  MeSsdt  00003000 INTL 20130927)
>[    0.000000] ACPI: TPM2 00000000ab7dc000 000034 (v03                 00000000      00000000)
>[    0.000000] ACPI: SSDT 00000000ab7db000 0005B1 (v01  Intel PerfTune 00001000 INTL 20130927)
>[    0.000000] ACPI: DBGP 00000000ab7da000 000034 (v01 INTEL           00000000 MSFT 0000005F)
>[    0.000000] ACPI: DBG2 00000000ab7d9000 000054 (v00 INTEL           00000000 MSFT 0000005F)
>[    0.000000] ACPI: LPIT 00000000ab7d8000 000094 (v01 INTEL   BDW-ULT 00000000 MSFT 0000005F)
>[    0.000000] ACPI: HPET 00000000ab7d6000 000038 (v01 INTEL   BDW-ULT 00000001 MSFT 0000005F)
>[    0.000000] ACPI: APIC 00000000ab7d5000 0000BC (v01 INTEL   BDW-ULT 00000001 MSFT 0000005F)
>[    0.000000] ACPI: MCFG 00000000ab7d4000 00003C (v01 INTEL   BDW-ULT 00000001 MSFT 0000005F)
>[    0.000000] ACPI: WDAT 00000000ab7d3000 000104 (v01 INTEL   BDW-ULT 00000000 MSFT 0000005F)
>[    0.000000] ACPI: SSDT 00000000ab7d2000 000250 (v01 INTEL  sensrhub 00000000 INTL 20130927)
>[    0.000000] ACPI: SSDT 00000000ab7cf000 002E26 (v01 INTEL  PtidDevc 00001000 INTL 20130927)
>[    0.000000] ACPI: SSDT 00000000ab7ce000 000C7D (v01 INTEL  Ther_Rvp 00001000 INTL 20130927)
>[    0.000000] ACPI: SSDT 00000000ab7cd000 00017F (v01 INTEL     zpodd 00001000 INTL 20130927)
>[    0.000000] ACPI: BOOT 00000000ab7cc000 000028 (v01  INTEL TIANO    00000002 MSFT 01000013)
>[    0.000000] ACPI: SSDT 00000000ab7cb000 00053B (v01  PmRef  Cpu0Ist 00003000 INTL 20130927)
>[    0.000000] ACPI: SSDT 00000000ab7ca000 000B74 (v01 CpuRef  CpuSsdt 00003000 INTL 20130927)
>[    0.000000] ACPI: SSDT 00000000ab7c2000 006F06 (v01 SaSsdt  SaSsdt  00003000 INTL 20130927)
>[    0.000000] ACPI: SSDT 00000000ab7e0000 0006A7 (v01 CppcTa CppcTabl 00001000 INTL 20130927)
>[    0.000000] ACPI: PCCT 00000000ab7c1000 00006E (v05 PcctTa PcctTabl 00001000 INTL 20130927)
>[    0.000000] ACPI: SSDT 00000000ab7c0000 000AC4 (v01 Cpc_Ta Cpc_Tabl 00001000 INTL 20130927)
>[    0.000000] ACPI: CSRT 00000000ab7bf000 0000C4 (v01   INTL  BDW-ULT 00000001 INTL 20100528)
>[    0.000000] ACPI: DMAR 00000000ab7be000 0000F0 (v01 INTEL      BDW  00000001 INTL 00000001)
>[    0.000000] ACPI: FPDT 00000000ab7bd000 000044 (v01 INTEL  EDK2     00000002      01000013)
>[    0.000000] ACPI: ASF! 00000000ab7bc000 0000A0 (v32 INTEL       HCG 00000001 TFSM 000F4240)
>[    0.000000] ACPI: BGRT 00000000ab7bb000 000038 (v01 INTEL  EDK2     00000002      01000013)
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] No NUMA configuration found
>[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000014f7fffff]
>[    0.000000] Initmem setup node 0 [mem 0x00000000-0x14f7fffff]
>[    0.000000]   NODE_DATA [mem 0x14f7fa000-0x14f7fdfff]
>[    0.000000]  [ffffea0000000000-ffffea00053fffff] PMD -> [ffff88014ae00000-ffff88014edfffff] on node 0
>[    0.000000] Zone ranges:
>[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
>[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
>[    0.000000]   Normal   [mem 0x100000000-0x14f7fffff]
>[    0.000000] Movable zone start for each node
>[    0.000000] Early memory node ranges
>[    0.000000]   node   0: [mem 0x00001000-0x00057fff]
>[    0.000000]   node   0: [mem 0x00059000-0x0009efff]
>[    0.000000]   node   0: [mem 0x00100000-0xa7f0afff]
>[    0.000000]   node   0: [mem 0xa7f29000-0xaaf4dfff]
>[    0.000000]   node   0: [mem 0xab7e2000-0xab7fefff]
>[    0.000000]   node   0: [mem 0x100000000-0x14f7fffff]
>[    0.000000] On node 0 totalpages: 1025770
>[    0.000000]   DMA zone: 64 pages used for memmap
>[    0.000000]   DMA zone: 26 pages reserved
>[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
>[    0.000000]   DMA32 zone: 10878 pages used for memmap
>[    0.000000]   DMA32 zone: 696141 pages, LIFO batch:31
>[    0.000000]   Normal zone: 5088 pages used for memmap
>[    0.000000]   Normal zone: 325632 pages, LIFO batch:31
>[    0.000000] ACPI: PM-Timer IO Port: 0x1808
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0xff] disabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0xff] disabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0xff] disabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0xff] disabled)
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
>[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>[    0.000000] ACPI: IRQ0 used by override.
>[    0.000000] ACPI: IRQ2 used by override.
>[    0.000000] ACPI: IRQ9 used by override.
>[    0.000000] Using ACPI (MADT) for SMP configuration information
>[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
>[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
>[    0.000000] nr_irqs_gsi: 56
>[    0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
>[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xa7f0b000-0xa7f28fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xaaf4e000-0xab5b5fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xab5b6000-0xab7b5fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xab7b6000-0xab7e1fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xab7ff000-0xad7fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xad800000-0xaf7fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xaf800000-0xe00f7fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xe00f8000-0xe00f8fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xe00f9000-0xfed1bfff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xff9fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xffa00000-0xffffffff]
>[    0.000000] e820: [mem 0xaf800000-0xe00f7fff] available for PCI devices
>[    0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
>[    0.000000] PERCPU: Embedded 26 pages/cpu @ffff88014f400000 s74560 r8192 d23744 u262144
>[    0.000000] pcpu-alloc: s74560 r8192 d23744 u262144 alloc=1*2097152
>[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
>[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1009714
>[    0.000000] Policy zone: Normal
>[    0.000000] Kernel command line: BOOT_IMAGE=kernels//kcloud/1d7da0e3acb333320b2440d7ccc141a5c5116b0d/bzImage_x86_64 root=/dev/sda2 drm.debug=0xe modules_path=kernels//kcloud/1d7da0e3acb333320b2440d7ccc141a5c5116b0d/modules_x86_64/lib/modules/3.14.0_kcloud_1d7da0_20140521+ acpi_rsdp=0xab7e1014 kexec_jump_back_entry=0x00027f7e
>[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
>[    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
>[    0.000000] Checking aperture...
>[    0.000000] No AGP bridge found
>[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
>[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>[    0.000000] Memory: 3935724K/4103080K available (7211K kernel code, 709K rwdata, 3552K rodata, 22556K init, 596K bss, 167356K reserved)
>[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
>[    0.000000] Hierarchical RCU implementation.
>[    0.000000] 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
>[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
>[    0.000000] NR_IRQS:4352 nr_irqs:1016 16
>[    0.000000] Console: colour dummy device 80x25
>[    0.000000] console [tty0] enabled
>[    0.000000] hpet clockevent registered
>[    0.000000] tsc: Fast TSC calibration using PIT
>[    0.000000] tsc: Detected 1795.854 MHz processor
>[    0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3591.70 BogoMIPS (lpj=1795854)
>[    0.000009] pid_max: default: 32768 minimum: 301
>[    0.000017] ACPI: Core revision 20131218
>[    0.021874] ACPI: All ACPI Tables successfully acquired
>[    0.021905] Security Framework initialized
>[    0.022201] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
>[    0.023195] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
>[    0.023641] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
>[    0.023650] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
>[    0.023880] CPU: Physical Processor ID: 0
>[    0.023883] CPU: Processor Core ID: 0
>[    0.025101] mce: CPU supports 7 MCE banks
>[    0.025113] CPU0: Thermal LVT vector (0xfa) already installed
>[    0.025122] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
>[    0.025122] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
>[    0.025122] tlb_flushall_shift: 6
>[    0.025585] Freeing SMP alternatives memory: 32K (ffffffff8313f000 - ffffffff83147000)
>[    0.026260] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>[    0.036261] smpboot: CPU0: Intel(R) Core(TM) i5-5###U CPU @ 1.80GHz (fam: 06, model: 3d, stepping: 04)
>[    0.036272] TSC deadline timer enabled
>[    0.036280] Performance Events: PEBS fmt2+, generic architected perfmon, full-width counters, Intel PMU driver.
>[    0.036289] ... version:                3
>[    0.036291] ... bit width:              48
>[    0.036293] ... generic registers:      4
>[    0.036295] ... value mask:             0000ffffffffffff
>[    0.036298] ... max period:             0000ffffffffffff
>[    0.036300] ... fixed-purpose events:   3
>[    0.036302] ... event mask:             000000070000000f
>[    0.036535] x86: Booting SMP configuration:
>[    0.036538] .... node  #0, CPUs:      #1
>[    0.048910] CPU1: Thermal LVT vector (0xfa) already installed
>[    0.051026]  #2<7>[    0.063602] CPU2: Thermal LVT vector (0xfa) already installed
>[    0.078096]  #3
>[    0.078096] CPU3: Thermal LVT vector (0xfa) already installed
>[    0.080166] x86: Booted up 1 node, 4 CPUs
>[    0.080172] smpboot: Total of 4 processors activated (14366.83 BogoMIPS)
>[    0.085350] devtmpfs: initialized
>[    0.085736] PM: Registering ACPI NVS region [mem 0xab5b6000-0xab7b5fff] (2097152 bytes)
>[    0.085928] xor: automatically using best checksumming function:
>[    0.095089]    avx       : 17380.000 MB/sec
>[    0.095119] RTC time: 17:12:54, date: 05/21/14
>[    0.095160] NET: Registered protocol family 16
>[    0.095578] cpuidle: using governor ladder
>[    0.095581] cpuidle: using governor menu
>[    0.095713] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
>[    0.095718] ACPI: bus type PCI registered
>[    0.095778] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
>[    0.095783] PCI: not using MMCONFIG
>[    0.095785] PCI: Using configuration type 1 for base access
>[    0.106019] bio: create slab <bio-0> at 0
>[    0.123124] raid6: sse2x1    5335 MB/s
>[    0.140149] raid6: sse2x2    6621 MB/s
>[    0.157166] raid6: sse2x4    7941 MB/s
>[    0.174187] raid6: avx2x1   10488 MB/s
>[    0.191200] raid6: avx2x2   12320 MB/s
>[    0.208224] raid6: avx2x4   14417 MB/s
>[    0.208226] raid6: using algorithm avx2x4 (14417 MB/s)
>[    0.208229] raid6: using avx2x2 recovery algorithm
>[    0.208287] ACPI: Added _OSI(Module Device)
>[    0.208290] ACPI: Added _OSI(Processor Device)
>[    0.208292] ACPI: Added _OSI(3.0 _SCP Extensions)
>[    0.208295] ACPI: Added _OSI(Processor Aggregator Device)
>[    0.220452] ACPI: Executed 18 blocks of module-level executable AML code
>[    0.253441] ACPI: SSDT 00000000ab57ca18 0004AE (v01  PmRef  Cpu0Cst 00003001 INTL 20130927)
>[    0.254382] ACPI: Dynamic OEM Table Load:
>[    0.254386] ACPI: SSDT           (null) 0004AE (v01  PmRef  Cpu0Cst 00003001 INTL 20130927)
>[    0.259603] ACPI: SSDT 00000000ab57d818 000792 (v01  PmRef    ApIst 00003000 INTL 20130927)
>[    0.260615] ACPI: Dynamic OEM Table Load:
>[    0.260618] ACPI: SSDT           (null) 000792 (v01  PmRef    ApIst 00003000 INTL 20130927)
>[    0.264445] ACPI: SSDT 00000000ab57bd98 000119 (v01  PmRef    ApCst 00003000 INTL 20130927)
>[    0.265381] ACPI: Dynamic OEM Table Load:
>[    0.265384] ACPI: SSDT           (null) 000119 (v01  PmRef    ApCst 00003000 INTL 20130927)
>[    0.272722] ACPI: Interpreter enabled
>[    0.272732] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131218/hwxface-580)
>[    0.272741] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-580)
>[    0.272766] ACPI: (supports S0 S3 S4 S5)
>[    0.272769] ACPI: Using IOAPIC for interrupt routing
>[    0.272794] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
>[    0.275157] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
>[    0.285881] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>[    0.286626] ACPI: ACPI Dock Station Driver: 1 docks/bays found
>[    0.287355] ACPI: Power Resource [PG00] (on)
>[    0.290761] ACPI: Power Resource [PG01] (on)
>[    0.296763] ACPI: Power Resource [PG02] (on)
>[    0.359466] ACPI: Power Resource [FN00] (off)
>[    0.359604] ACPI: Power Resource [FN01] (off)
>[    0.359735] ACPI: Power Resource [FN02] (off)
>[    0.359863] ACPI: Power Resource [FN03] (off)
>[    0.359993] ACPI: Power Resource [FN04] (off)
>[    0.361352] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
>[    0.361361] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
>[    0.361916] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
>[    0.362534] PCI host bridge to bus 0000:00
>[    0.362539] pci_bus 0000:00: root bus resource [bus 00-fe]
>[    0.362543] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
>[    0.362546] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
>[    0.362549] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
>[    0.362557] pci_bus 0000:00: root bus resource [mem 0xaf800000-0xfeafffff]
>[    0.362568] pci 0000:00:00.0: [8086:1604] type 00 class 0x060000
>[    0.362849] pci 0000:00:02.0: [8086:1616] type 00 class 0x030000
>[    0.362864] pci 0000:00:02.0: reg 0x10: [mem 0xc0000000-0xc0ffffff 64bit]
>[    0.362873] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
>[    0.362880] pci 0000:00:02.0: reg 0x20: [io  0x3000-0x303f]
>[    0.363149] pci 0000:00:03.0: [8086:160c] type 00 class 0x040300
>[    0.363158] pci 0000:00:03.0: reg 0x10: [mem 0xc1030000-0xc1033fff 64bit]
>[    0.363450] pci 0000:00:14.0: [8086:9cb1] type 00 class 0x0c0330
>[    0.363469] pci 0000:00:14.0: reg 0x10: [mem 0xc1020000-0xc102ffff 64bit]
>[    0.363532] pci 0000:00:14.0: PME# supported from D3hot D3cold
>[    0.363742] pci 0000:00:14.0: System wakeup disabled by ACPI
>[    0.363810] pci 0000:00:16.0: [8086:9cba] type 00 class 0x078000
>[    0.363830] pci 0000:00:16.0: reg 0x10: [mem 0xc1035000-0xc103501f 64bit]
>[    0.363895] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
>[    0.364158] pci 0000:00:19.0: [8086:15a2] type 00 class 0x020000
>[    0.364177] pci 0000:00:19.0: reg 0x10: [mem 0xc1000000-0xc101ffff]
>[    0.364185] pci 0000:00:19.0: reg 0x14: [mem 0xc1038000-0xc1038fff]
>[    0.364194] pci 0000:00:19.0: reg 0x18: [io  0x3080-0x309f]
>[    0.364256] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
>[    0.364460] pci 0000:00:19.0: System wakeup disabled by ACPI
>[    0.364532] pci 0000:00:1f.0: [8086:9cc3] type 00 class 0x060100
>[    0.364902] pci 0000:00:1f.2: [8086:9c83] type 00 class 0x010601
>[    0.364918] pci 0000:00:1f.2: reg 0x10: [io  0x30a8-0x30af]
>[    0.364926] pci 0000:00:1f.2: reg 0x14: [io  0x30b4-0x30b7]
>[    0.364934] pci 0000:00:1f.2: reg 0x18: [io  0x30a0-0x30a7]
>[    0.364942] pci 0000:00:1f.2: reg 0x1c: [io  0x30b0-0x30b3]
>[    0.364950] pci 0000:00:1f.2: reg 0x20: [io  0x3060-0x307f]
>[    0.364958] pci 0000:00:1f.2: reg 0x24: [mem 0xc1037000-0xc10377ff]
>[    0.364997] pci 0000:00:1f.2: PME# supported from D3hot
>[    0.365245] pci 0000:00:1f.3: [8086:9ca2] type 00 class 0x0c0500
>[    0.365261] pci 0000:00:1f.3: reg 0x10: [mem 0xc1034000-0xc10340ff 64bit]
>[    0.365282] pci 0000:00:1f.3: reg 0x20: [io  0xefa0-0xefbf]
>[    0.365550] pci 0000:00:1f.6: [8086:9ca4] type 00 class 0x118000
>[    0.365586] pci 0000:00:1f.6: reg 0x10: [mem 0xc1036000-0xc1036fff 64bit]
>[    0.365913] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
>[    0.372789] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15), disabled.
>[    0.372865] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    0.372922] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15), disabled.
>[    0.372976] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15), disabled.
>[    0.373029] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *10 11 12 14 15), disabled.
>[    0.373082] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    0.373136] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    0.373190] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    0.373493] ACPI: Enabled 4 GPEs in block 00 to 7F
>[    0.373718] ACPI : EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62
>[    0.373890] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
>[    0.373895] vgaarb: loaded
>[    0.373897] vgaarb: bridge control possible 0000:00:02.0
>[    0.374033] SCSI subsystem initialized
>[    0.374139] libata version 3.00 loaded.
>[    0.374268] ACPI: bus type USB registered
>[    0.374332] usbcore: registered new interface driver usbfs
>[    0.374365] usbcore: registered new interface driver hub
>[    0.374409] usbcore: registered new device driver usb
>[    0.374508] pps_core: LinuxPPS API ver. 1 registered
>[    0.374511] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
>[    0.374537] PTP clock support registered
>[    0.374669] PCI: Using ACPI for IRQ routing
>[    0.380804] PCI: pci_cache_line_size set to 64 bytes
>[    0.380830] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
>[    0.380832] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
>[    0.380834] e820: reserve RAM buffer [mem 0xa7f0b000-0xa7ffffff]
>[    0.380836] e820: reserve RAM buffer [mem 0xaaf4e000-0xabffffff]
>[    0.380838] e820: reserve RAM buffer [mem 0xab7ff000-0xabffffff]
>[    0.380839] e820: reserve RAM buffer [mem 0x14f800000-0x14fffffff]
>[    0.381023] NetLabel: Initializing
>[    0.381026] NetLabel:  domain hash size = 128
>[    0.381028] NetLabel:  protocols = UNLABELED CIPSOv4
>[    0.381043] NetLabel:  unlabeled traffic allowed by default
>[    0.381185] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
>[    0.381193] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
>[    0.383221] Switched to clocksource hpet
>[    0.383300] pnp: PnP ACPI init
>[    0.383310] ACPI: bus type PNP registered
>[    0.383640] system 00:00: [io  0x06a4] has been reserved
>[    0.383644] system 00:00: [io  0x06a0] has been reserved
>[    0.383649] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.383751] pnp 00:01: [dma 4]
>[    0.383801] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
>[    0.383859] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
>[    0.384003] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
>[    0.384096] system 00:04: [io  0x0680-0x069f] has been reserved
>[    0.384100] system 00:04: [io  0xffff] has been reserved
>[    0.384104] system 00:04: [io  0xffff] has been reserved
>[    0.384107] system 00:04: [io  0xffff] has been reserved
>[    0.384110] system 00:04: [io  0x1800-0x18fe] could not be reserved
>[    0.384114] system 00:04: [io  0x164e-0x164f] has been reserved
>[    0.384118] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.384198] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
>[    0.384295] system 00:06: [io  0x1854-0x1857] has been reserved
>[    0.384300] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
>[    0.384457] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
>[    0.384609] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
>[    0.385287] system 00:09: [mem 0xfe102000-0xfe102fff] has been reserved
>[    0.385292] system 00:09: [mem 0xfe104000-0xfe104fff] has been reserved
>[    0.385297] system 00:09: [mem 0xfe106000-0xfe106fff] has been reserved
>[    0.385301] system 00:09: [mem 0xfe10e000-0xfe10efff] has been reserved
>[    0.385304] system 00:09: [mem 0xfe112000-0xfe112fff] has been reserved
>[    0.385308] system 00:09: [mem 0xfe111000-0xfe111007] has been reserved
>[    0.385311] system 00:09: [mem 0xfe111014-0xfe111fff] has been reserved
>[    0.385315] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.385461] pnp 00:0a: Plug and Play ACPI device, IDs INT3437 (active)
>[    0.400331] pnp 00:0b: Plug and Play ACPI device, IDs INT3432 (active)
>[    0.405329] pnp 00:0c: Plug and Play ACPI device, IDs INT3433 (active)
>[    0.406057] system 00:0d: [mem 0xfed1c000-0xfed1ffff] has been reserved
>[    0.406062] system 00:0d: [mem 0xfed10000-0xfed17fff] has been reserved
>[    0.406066] system 00:0d: [mem 0xfed18000-0xfed18fff] has been reserved
>[    0.406069] system 00:0d: [mem 0xfed19000-0xfed19fff] has been reserved
>[    0.406073] system 00:0d: [mem 0xe0000000-0xefffffff] could not be reserved
>[    0.406077] system 00:0d: [mem 0xfed20000-0xfed3ffff] has been reserved
>[    0.406080] system 00:0d: [mem 0xfed90000-0xfed93fff] has been reserved
>[    0.406084] system 00:0d: [mem 0xfed45000-0xfed8ffff] has been reserved
>[    0.406087] system 00:0d: [mem 0xff000000-0xffffffff] could not be reserved
>[    0.406091] system 00:0d: [mem 0xfee00000-0xfeefffff] has been reserved
>[    0.406094] system 00:0d: [mem 0xaf810000-0xaf81ffff] has been reserved
>[    0.406098] system 00:0d: [mem 0xaf800000-0xaf80ffff] has been reserved
>[    0.406102] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.406436] system 00:0e: [mem 0x00000000-0x0009cfff] could not be reserved
>[    0.406441] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
>[    0.406586] pnp: PnP ACPI: found 15 devices
>[    0.406589] ACPI: bus type PNP unregistered
>[    0.415572] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
>[    0.415575] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
>[    0.415577] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
>[    0.415579] pci_bus 0000:00: resource 7 [mem 0xaf800000-0xfeafffff]
>[    0.415608] NET: Registered protocol family 2
>[    0.415764] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
>[    0.415853] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
>[    0.415929] TCP: Hash tables configured (established 32768 bind 32768)
>[    0.415953] TCP: reno registered
>[    0.415962] UDP hash table entries: 2048 (order: 4, 65536 bytes)
>[    0.415981] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
>[    0.416039] NET: Registered protocol family 1
>[    0.416112] RPC: Registered named UNIX socket transport module.
>[    0.416115] RPC: Registered udp transport module.
>[    0.416117] RPC: Registered tcp transport module.
>[    0.416120] RPC: Registered tcp NFSv4.1 backchannel transport module.
>[    0.416128] pci 0000:00:02.0: Boot video device
>[    0.416224] pci 0000:00:14.0: can't derive routing for PCI INT A
>[    0.416228] pci 0000:00:14.0: PCI INT A: no GSI - using ISA IRQ 11
>[    0.416325] pci 0000:00:14.0: can't derive routing for PCI INT A
>[    0.416343] PCI: CLS 0 bytes, default 64
>[    0.929700] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>[    0.929708] software IO TLB [mem 0xa3f0b000-0xa7f0b000] (64MB) mapped at [ffff8800a3f0b000-ffff8800a7f0afff]
>[    0.929857] Simple Boot Flag at 0x47 set to 0x1
>[    0.931302] futex hash table entries: 2048 (order: 5, 131072 bytes)
>[    0.931358] audit: initializing netlink subsys (disabled)
>[    0.931370] audit: type=2000 audit(1400692374.894:1): initialized
>[    0.962675] HugeTLB registered 2 MB page size, pre-allocated 0 pages
>[    0.966174] VFS: Disk quotas dquot_6.5.2
>[    0.966256] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>[    0.967719] NFS: Registering the id_resolver key type
>[    0.967729] Key type id_resolver registered
>[    0.967732] Key type id_legacy registered
>[    0.967736] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>[    0.968006] fuse init (API version 7.22)
>[    0.968212] msgmni has been set to 7687
>[    0.968557] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
>[    0.968562] io scheduler noop registered
>[    0.968564] io scheduler deadline registered
>[    0.968626] io scheduler cfq registered (default)
>[    0.968824] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>[    0.968947] efifb: probing for efifb
>[    0.969370] efifb: framebuffer at 0xb0000000, mapped to 0xffffc90010880000, using 8100k, total 8100k
>[    0.969374] efifb: mode is 1920x1080x32, linelength=7680, pages=2032
>[    0.969376] efifb: scrolling: redraw
>[    0.969379] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
>[    0.976229] Console: switching to colour frame buffer device 240x67
>[    0.982539] fb0: EFI VGA frame buffer device
>[    0.982721] ACPI: Fan [FAN0] (off)
>[    0.982800] ACPI: Fan [FAN1] (off)
>[    0.982877] ACPI: Fan [FAN2] (off)
>[    0.982954] ACPI: Fan [FAN3] (off)
>[    0.983040] ACPI: Fan [FAN4] (off)
>[    0.983467] Monitor-Mwait will be used to enter C-1 state
>[    0.985490] thermal LNXTHERM:00: registered as thermal_zone0
>[    0.985524] ACPI: Thermal Zone [TZ00] (46 C)
>[    0.986323] thermal LNXTHERM:01: registered as thermal_zone1
>[    0.986356] ACPI: Thermal Zone [TZ01] (46 C)
>[    0.986482] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>[    1.007178] 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
>[    1.008048] Non-volatile memory driver v1.3
>[    1.008074] Linux agpgart interface v0.103
>[    1.010500] brd: module loaded
>[    1.010855] Loading iSCSI transport class v2.0-870.
>[    1.011473] iscsi: registered transport (tcp)
>[    1.011652] Adaptec aacraid driver 1.2-0[30200]-ms
>[    1.011722] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
>[    1.011937] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.06.00.12-k.
>[    1.012075] iscsi: registered transport (qla4xxx)
>[    1.012145] QLogic iSCSI HBA Driver
>[    1.012244] DC390: clustering now enabled by default. If you get problems load
>[    1.012283]        with "disable_clustering=1" and report to maintainers
>[    1.012402] GDT-HA: Storage RAID Controller Driver. Version: 3.05
>[    1.012551] RocketRAID 3xxx/4xxx Controller driver v1.8
>[    1.012621] stex: Promise SuperTrak EX Driver version: 4.6.0000.4
>[    1.012741] st: Version 20101219, fixed bufsize 32768, s/g segs 256
>[    1.012851] osst :I: Tape driver with OnStream support version 0.99.4
>[    1.012851] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
>[    1.013151] SCSI Media Changer driver v0.25 
>[    1.013256] ahci 0000:00:1f.2: version 3.0
>[    1.013381] ahci 0000:00:1f.2: irq 56 for MSI/MSI-X
>[    1.024029] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x2 impl SATA mode
>[    1.024075] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst 
>[    1.024902] scsi0 : ahci
>[    1.025083] scsi1 : ahci
>[    1.025243] scsi2 : ahci
>[    1.025405] scsi3 : ahci
>[    1.026867] ata1: DUMMY
>[    1.028214] ata2: SATA max UDMA/133 abar m2048@0xc1037000 port 0xc1037180 irq 56
>[    1.029591] ata3: DUMMY
>[    1.030934] ata4: DUMMY
>[    1.034657] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.20 (March 14, 2014)
>[    1.036052] bnx2x: Broadcom NetXtreme II 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.78.17-0 (2013/04/11)
>[    1.037549] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
>[    1.038965] e100: Copyright(c) 1999-2006 Intel Corporation
>[    1.040419] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
>[    1.041831] e1000: Copyright (c) 1999-2006 Intel Corporation.
>[    1.043300] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
>[    1.044718] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
>[    1.046280] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
>[    1.047728] e1000e 0000:00:19.0: irq 57 for MSI/MSI-X
>[    1.209250] e1000e 0000:00:19.0 eth0: registered PHC clock
>[    1.210685] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:13:20:fc:d6:b4
>[    1.212137] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
>[    1.213617] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
>[    1.215114] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.5-k
>[    1.216575] igb: Copyright (c) 2007-2013 Intel Corporation.
>[    1.218120] usbcore: registered new interface driver zd1201
>[    1.219606] usbcore: registered new interface driver catc
>[    1.221068] usbcore: registered new interface driver kaweth
>[    1.222473] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
>[    1.223942] usbcore: registered new interface driver pegasus
>[    1.225404] usbcore: registered new interface driver rtl8150
>[    1.226848] usbcore: registered new interface driver asix
>[    1.228285] usbcore: registered new interface driver ax88179_178a
>[    1.229723] usbcore: registered new interface driver cdc_ether
>[    1.231171] usbcore: registered new interface driver dm9601
>[    1.232615] usbcore: registered new interface driver gl620a
>[    1.234066] usbcore: registered new interface driver net1080
>[    1.235499] usbcore: registered new interface driver plusb
>[    1.236922] usbcore: registered new interface driver rndis_host
>[    1.238323] usbcore: registered new interface driver cdc_subset
>[    1.239705] usbcore: registered new interface driver zaurus
>[    1.241079] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
>[    1.242443] usbcore: registered new interface driver cdc_ncm
>[    1.243940] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>[    1.245250] ehci-pci: EHCI PCI platform driver
>[    1.246634] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>[    1.247962] ohci-pci: OHCI PCI platform driver
>[    1.249323] uhci_hcd: USB Universal Host Controller Interface driver
>[    1.250789] xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A
>[    1.252126] xhci_hcd 0000:00:14.0: PCI INT A: no GSI - using ISA IRQ 11
>[    1.253466] xhci_hcd 0000:00:14.0: xHCI Host Controller
>[    1.254830] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
>[    1.256231] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
>[    1.256249] xhci_hcd 0000:00:14.0: irq 58 for MSI/MSI-X
>[    1.256306] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>[    1.257617] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.258920] usb usb1: Product: xHCI Host Controller
>[    1.260206] usb usb1: Manufacturer: Linux 3.14.0_kcloud_1d7da0_20140521+ xhci_hcd
>[    1.261511] usb usb1: SerialNumber: 0000:00:14.0
>[    1.262991] hub 1-0:1.0: USB hub found
>[    1.264292] hub 1-0:1.0: 11 ports detected
>[    1.269063] xhci_hcd 0000:00:14.0: xHCI Host Controller
>[    1.270414] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
>[    1.271726] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
>[    1.273006] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.274274] usb usb2: Product: xHCI Host Controller
>[    1.275518] usb usb2: Manufacturer: Linux 3.14.0_kcloud_1d7da0_20140521+ xhci_hcd
>[    1.276800] usb usb2: SerialNumber: 0000:00:14.0
>[    1.278279] hub 2-0:1.0: USB hub found
>[    1.279591] hub 2-0:1.0: 4 ports detected
>[    1.282382] usbcore: registered new interface driver usb-storage
>[    1.283804] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
>[    1.285125] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
>[    1.286932] serio: i8042 KBD port at 0x60,0x64 irq 1
>[    1.288422] mousedev: PS/2 mouse device common for all mice
>[    1.289908] rtc_cmos 00:05: RTC can wake from S4
>[    1.291388] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
>[    1.292723] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
>[    1.294082] i2c /dev entries driver
>[    1.295503] hidraw: raw HID events driver (C) Jiri Kosina
>[    1.297588] usbcore: registered new interface driver usbhid
>[    1.298897] usbhid: USB HID core driver
>[    1.300318] TCP: cubic registered
>[    1.301590] Initializing XFRM netlink socket
>[    1.302870] NET: Registered protocol family 17
>[    1.304164] Key type dns_resolver registered
>[    1.306064] registered taskstats version 1
>[    1.307718] bio: create slab <bio-1> at 1
>[    1.309302] Btrfs loaded
>[    1.310780]   Magic number: 14:542:239
>[    1.312050] fan PNP0C0B:04: hash matches
>[    1.313383] PM: Hibernation image not present or could not be loaded.
>[    1.313401] Warning: unable to open an initial console.
>[    1.329870] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
>[    1.336916] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[    1.338461] ata2.00: ATA-9: INTEL SSDSC2BB240G4, D2010370, max UDMA/133
>[    1.339764] ata2.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 31/32)
>[    1.341372] ata2.00: configured for UDMA/133
>[    1.342808] scsi 1:0:0:0: Direct-Access     ATA      INTEL SSDSC2BB24 D201 PQ: 0 ANSI: 5
>[    1.344400] sd 1:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/223 GiB)
>[    1.344512] sd 1:0:0:0: Attached scsi generic sg0 type 0
>[    1.347206] sd 1:0:0:0: [sda] 4096-byte physical blocks
>[    1.348641] sd 1:0:0:0: [sda] Write Protect is off
>[    1.350042] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[    1.350053] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    1.353081]  sda: sda1 sda2 sda3
>[    1.354967] sd 1:0:0:0: [sda] Attached SCSI disk
>[    1.360752] Freeing unused kernel memory: 22556K (ffffffff81b38000 - ffffffff8313f000)
>[    1.400007] dracut: dracut-018-35.git20120510.fc17
>[    1.431654] udevd[1414]: starting version 182
>[    1.449290] [drm] Initialized drm 1.1.0 20060810
>[    1.453187] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
>[    1.455328] ACPI: Lid Switch [LID0]
>[    1.457172] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
>[    1.462175] ACPI: Power Button [PWRB]
>[    1.462799] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
>[    1.463159] ACPI: Sleep Button [SLPB]
>[    1.463645] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
>[    1.464032] ACPI: Power Button [PWRF]
>[    1.468428] [drm:i915_dump_device_info] i915 device info: gen=8, pciid=0x1616 flags=is_mobile,need_gfx_hws,has_fbc,has_hotplug,has_llc,has_ddi,
>[    1.468428] [drm:intel_detect_pch] This is Broadwell, assuming LynxPoint LP PCH
>[    1.469305] [drm] Memory usable by graphics device = 4096M
>[    1.469307] [drm:i915_gem_gtt_init] GMADR size = 256M
>[    1.469308] [drm:i915_gem_gtt_init] GTT stolen size = 32M
>[    1.469311] checking generic (b0000000 7e9000) vs hw (b0000000 10000000)
>[    1.469312] fb: conflicting fb hw usage inteldrmfb vs EFI VGA - removing generic driver
>[    1.481840] Console: switching to colour dummy device 80x25
>[    1.496235] [drm:intel_opregion_setup] graphic opregion physical addr: 0xab77b018
>[    1.496244] [drm:intel_opregion_setup] Public ACPI methods supported
>[    1.496246] [drm:intel_opregion_setup] SWSCI supported
>[    1.501849] [drm:swsci_setup] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00700483
>[    1.501851] [drm:intel_opregion_setup] ASLE supported
>[    1.501891] i915 0000:00:02.0: irq 59 for MSI/MSI-X
>[    1.501901] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
>[    1.501904] [drm] Driver supports precise vblank timestamp query.
>[    1.501908] [drm:init_vbt_defaults] Set default to SSC at 120000 kHz
>[    1.501911] [drm:validate_vbt] Using VBT from OpRegion: $VBT HASWELL        d
>[    1.501914] [drm:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0
>[    1.501915] [drm:parse_general_definitions] crt_ddc_bus_pin: 2
>[    1.501918] [drm:parse_lfp_panel_data] DRRS supported mode is static
>[    1.501920] [drm:parse_lfp_panel_data] Found panel mode in BIOS VBT tables:
>[    1.501924] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 0 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x8 0xa
>[    1.501926] [drm:parse_lfp_panel_data] VBT initial LVDS value 30033c
>[    1.501928] [drm:parse_lfp_backlight] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255
>[    1.501931] [drm:parse_sdvo_panel_data] Found SDVO panel mode in BIOS VBT tables:
>[    1.501934] [drm:drm_mode_debug_printmodeline] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
>[    1.501935] [drm:parse_sdvo_device_mapping] No SDVO device info is found in VBT
>[    1.501937] [drm:parse_driver_features] DRRS State Enabled:1
>[    1.501939] [drm:parse_mipi] No MIPI config BDB found
>[    1.501942] [drm:parse_ddi_port] Port A VBT info: DP:1 HDMI:0 DVI:0 EDP:1 CRT:0
>[    1.501944] [drm:parse_ddi_port] VBT HDMI level shift for port A: 0
>[    1.501946] [drm:parse_ddi_port] Port B VBT info: DP:1 HDMI:1 DVI:1 EDP:0 CRT:0
>[    1.501948] [drm:parse_ddi_port] VBT HDMI level shift for port B: 3
>[    1.501950] [drm:parse_ddi_port] Port C VBT info: DP:0 HDMI:1 DVI:1 EDP:0 CRT:0
>[    1.501951] [drm:parse_ddi_port] VBT HDMI level shift for port C: 3
>[    1.502015] [drm:intel_dsm_pci_probe] no _DSM method for intel device
>[    1.502021] [drm:i915_gem_init_stolen] found 33554432 bytes of stolen memory at ad800000
>[    1.502024] [drm:intel_display_power_get] enabling always-on
>[    1.502025] [drm:intel_display_power_get] enabling display
>[    1.502029] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
>[    1.502088] [drm:intel_print_wm_latency] Primary WM0 latency 20 (2.0 usec)
>[    1.502089] [drm:intel_print_wm_latency] Primary WM1 latency 50 (25.0 usec)
>[    1.502091] [drm:intel_print_wm_latency] Primary WM2 latency 90 (45.0 usec)
>[    1.502093] [drm:intel_print_wm_latency] Primary WM3 latency 130 (65.0 usec)
>[    1.502095] [drm:intel_print_wm_latency] Primary WM4 latency 160 (80.0 usec)
>[    1.502097] [drm:intel_print_wm_latency] Sprite WM0 latency 20 (2.0 usec)
>[    1.502098] [drm:intel_print_wm_latency] Sprite WM1 latency 50 (25.0 usec)
>[    1.502100] [drm:intel_print_wm_latency] Sprite WM2 latency 90 (45.0 usec)
>[    1.502102] [drm:intel_print_wm_latency] Sprite WM3 latency 130 (65.0 usec)
>[    1.502103] [drm:intel_print_wm_latency] Sprite WM4 latency 160 (80.0 usec)
>[    1.502105] [drm:intel_print_wm_latency] Cursor WM0 latency 20 (2.0 usec)
>[    1.502107] [drm:intel_print_wm_latency] Cursor WM1 latency 50 (25.0 usec)
>[    1.502108] [drm:intel_print_wm_latency] Cursor WM2 latency 90 (45.0 usec)
>[    1.502110] [drm:intel_print_wm_latency] Cursor WM3 latency 130 (65.0 usec)
>[    1.502112] [drm:intel_print_wm_latency] Cursor WM4 latency 160 (80.0 usec)
>[    1.502114] [drm:intel_modeset_init] 3 display pipes available.
>[    1.502131] [drm:intel_ddi_pll_init] CDCLK running at 540000KHz
>[    1.502436] [drm:intel_dp_init_connector] Adding eDP connector on port A
>[    1.502545] [drm:intel_dp_init_panel_power_sequencer] cur t1_t3 2000 t8 0 t9 2000 t10 500 t11_t12 6000
>[    1.502547] [drm:intel_dp_init_panel_power_sequencer] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000
>[    1.502549] [drm:intel_dp_init_panel_power_sequencer] panel power up delay 200, power down delay 50, power cycle delay 600
>[    1.502551] [drm:intel_dp_init_panel_power_sequencer] backlight on delay 1, off delay 200
>[    1.502552] [drm:intel_dp_aux_init] registering DPDDC-A bus for card0-eDP-1
>[    1.502686] [drm:_edp_panel_vdd_on] Turning eDP VDD on
>[    1.502693] [drm:_edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f
>[    1.502965] [drm:intel_dp_get_dpcd] DPCD: 11 0a 02 00 00 00 00 00 00 00 00 00 00 00 00
>[    1.503135] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06
>[    1.524711] [drm:drm_edid_to_eld] ELD: no CEA Extension found
>[    1.524713] [drm] VBT doesn't support DRRS
>[    1.524784] [drm:intel_panel_setup_backlight] backlight initialized, enabled, brightness 937/937, sysfs interface registered
>[    1.524795] [drm:intel_dp_init_connector] Adding DP connector on port B
>[    1.524895] [drm:intel_dp_aux_init] registering DPDDC-B bus for card0-DP-1
>[    1.530843] [drm:intel_modeset_readout_hw_state] [CRTC:5] hw state readout: enabled
>[    1.530847] [drm:intel_modeset_readout_hw_state] [CRTC:8] hw state readout: disabled
>[    1.530849] [drm:intel_modeset_readout_hw_state] [CRTC:11] hw state readout: disabled
>[    1.530852] [drm:intel_ddi_get_crtc_pll] Pipe A connected to port A using clock 0x20000000
>[    1.530857] [drm:intel_modeset_readout_hw_state] [ENCODER:13:TMDS-13] hw state readout: enabled, pipe A
>[    1.530859] [drm:intel_modeset_readout_hw_state] [ENCODER:22:TMDS-22] hw state readout: disabled, pipe A
>[    1.530862] [drm:intel_modeset_readout_hw_state] [ENCODER:25:TMDS-25] hw state readout: disabled, pipe A
>[    1.530865] [drm:intel_modeset_readout_hw_state] [CONNECTOR:14:eDP-1] hw state readout: enabled
>[    1.530867] [drm:intel_modeset_readout_hw_state] [CONNECTOR:23:DP-1] hw state readout: disabled
>[    1.530869] [drm:intel_modeset_readout_hw_state] [CONNECTOR:24:HDMI-A-1] hw state readout: disabled
>[    1.530871] [drm:intel_modeset_readout_hw_state] [CONNECTOR:26:HDMI-A-2] hw state readout: disabled
>[    1.530874] [drm:intel_dump_pipe_config] [CRTC:5][setup_hw_state] config for pipe A
>[    1.530876] [drm:intel_dump_pipe_config] cpu_transcoder: D
>[    1.530877] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
>[    1.530880] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.530882] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64
>[    1.530884] [drm:intel_dump_pipe_config] requested mode:
>[    1.530887] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 1920 0 0 0 1080 0 0 0 0x0 0x0
>[    1.530888] [drm:intel_dump_pipe_config] adjusted mode:
>[    1.530891] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0xa
>[    1.530894] [drm:intel_dump_crtc_timings] crtc timings: 138779 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x0 flags: 0xa
>[    1.530895] [drm:intel_dump_pipe_config] port clock: 270000
>[    1.530897] [drm:intel_dump_pipe_config] pipe src size: 1920x1080
>[    1.530899] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    1.530901] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x07800438, enabled
>[    1.530903] [drm:intel_dump_pipe_config] ips: 0
>[    1.530904] [drm:intel_dump_pipe_config] double wide: 0
>[    1.530906] [drm:intel_dump_pipe_config] [CRTC:8][setup_hw_state] config for pipe B
>[    1.530908] [drm:intel_dump_pipe_config] cpu_transcoder: B
>[    1.530909] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
>[    1.530911] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.530913] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.530915] [drm:intel_dump_pipe_config] requested mode:
>[    1.530917] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    1.530919] [drm:intel_dump_pipe_config] adjusted mode:
>[    1.530921] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    1.530923] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[    1.530925] [drm:intel_dump_pipe_config] port clock: 0
>[    1.530926] [drm:intel_dump_pipe_config] pipe src size: 0x0
>[    1.530928] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    1.530930] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    1.530931] [drm:intel_dump_pipe_config] ips: 0
>[    1.530933] [drm:intel_dump_pipe_config] double wide: 0
>[    1.530935] [drm:intel_dump_pipe_config] [CRTC:11][setup_hw_state] config for pipe C
>[    1.530936] [drm:intel_dump_pipe_config] cpu_transcoder: C
>[    1.530938] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
>[    1.530940] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.530942] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.530943] [drm:intel_dump_pipe_config] requested mode:
>[    1.530946] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    1.530947] [drm:intel_dump_pipe_config] adjusted mode:
>[    1.530949] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    1.530952] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[    1.530953] [drm:intel_dump_pipe_config] port clock: 0
>[    1.530954] [drm:intel_dump_pipe_config] pipe src size: 0x0
>[    1.530956] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    1.530958] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    1.530959] [drm:intel_dump_pipe_config] ips: 0
>[    1.530961] [drm:intel_dump_pipe_config] double wide: 0
>[    1.530967] [drm:intel_connector_check_state] [CONNECTOR:14:eDP-1]
>[    1.530970] [drm:check_encoder_state] [ENCODER:13:TMDS-13]
>[    1.530973] [drm:check_encoder_state] [ENCODER:22:TMDS-22]
>[    1.530975] [drm:check_encoder_state] [ENCODER:25:TMDS-25]
>[    1.530976] [drm:check_crtc_state] [CRTC:5]
>[    1.530983] [drm:check_crtc_state] [CRTC:8]
>[    1.530986] [drm:check_crtc_state] [CRTC:11]
>[    1.530991] [drm:ironlake_get_plane_config] pipe/plane 0/0 with fb: size=1920x1080@32, offset=0, pitch 7680, size 0x7e9000
>[    1.530994] [drm:i915_gem_object_create_stolen_for_preallocated] creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=7e9000
>[    1.530996] [drm:i915_pages_create_for_stolen] offset=0x0, size=8294400
>[    1.531000] [drm:intel_alloc_plane_obj] plane fb obj ffff8800aa9be600
>[    1.531003] [drm:i915_gem_setup_global_gtt] reserving preallocated space: 0 + 7e9000
>[    1.531005] [drm:i915_gem_setup_global_gtt] clearing unused GTT space: [7e9000, fffff000]
>[    1.534233] [drm:gen8_ppgtt_init] Allocated 4 pages for page directories (0 wasted)
>[    1.534236] [drm:gen8_ppgtt_init] Allocated 2048 pages for page tables (0 wasted)
>[    1.534238] [drm:i915_gem_context_init] HW context support initialized
>[    1.534255] [drm:init_status_page] render ring hws offset: 0x007fb000
>[    1.534336] [drm:init_pipe_control] render ring pipe control offset: 0x0081c000
>[    1.534342] [drm:init_status_page] bsd ring hws offset: 0x0081d000
>[    1.534408] [drm:init_status_page] blitter ring hws offset: 0x0083e000
>[    1.534466] [drm:init_status_page] video enhancement ring hws offset: 0x0085f000
>[    1.534657] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:14:eDP-1]
>[    1.534660] [drm:intel_dp_detect] [CONNECTOR:14:eDP-1]
>[    1.534669] [drm:drm_edid_to_eld] ELD: no CEA Extension found
>[    1.534673] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:14:eDP-1] probed modes :
>[    1.534676] [drm:drm_mode_debug_printmodeline] Modeline 15:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa
>[    1.534679] [drm:drm_mode_debug_printmodeline] Modeline 16:"1920x1080" 40 92520 1920 1966 1996 2080 1080 1082 1086 1112 0x40 0xa
>[    1.534681] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:23:DP-1]
>[    1.534683] [drm:intel_dp_detect] [CONNECTOR:23:DP-1]
>[    1.534687] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:23:DP-1] disconnected
>[    1.534689] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:24:HDMI-A-1]
>[    1.534691] [drm:intel_hdmi_detect] [CONNECTOR:24:HDMI-A-1]
>[    1.534846] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
>[    1.534848] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
>[    1.534850] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:24:HDMI-A-1] disconnected
>[    1.534852] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:26:HDMI-A-2]
>[    1.534854] [drm:intel_hdmi_detect] [CONNECTOR:26:HDMI-A-2]
>[    1.535012] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[    1.535013] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[    1.535015] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:26:HDMI-A-2] disconnected
>[    1.535017] [drm:drm_setup_crtcs] 
>[    1.535019] [drm:drm_enable_connectors] connector 14 enabled? yes
>[    1.535020] [drm:drm_enable_connectors] connector 23 enabled? no
>[    1.535022] [drm:drm_enable_connectors] connector 24 enabled? no
>[    1.535023] [drm:drm_enable_connectors] connector 26 enabled? no
>[    1.535026] [drm:intel_fb_initial_config] looking for cmdline mode on connector 14
>[    1.535027] [drm:intel_fb_initial_config] looking for preferred mode on connector 14
>[    1.535029] [drm:intel_fb_initial_config] connector eDP-1 on crtc 5: 1920x1080
>[    1.535031] [drm:intel_fb_initial_config] connector 23 not enabled, skipping
>[    1.535033] [drm:intel_fb_initial_config] connector 24 not enabled, skipping
>[    1.535034] [drm:intel_fb_initial_config] connector 26 not enabled, skipping
>[    1.535036] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 5
>[    1.535038] [drm:intelfb_create] no BIOS fb, allocating a new one
>[    1.535040] [drm:i915_gem_object_create_stolen] creating stolen object: size=7e9000
>[    1.535043] [drm:i915_pages_create_for_stolen] offset=0x7e9000, size=8294400
>[    1.536373] [drm:intelfb_create] allocated 1920x1080 fb: 0x00880000, bo ffff8800aa9bf680
>[    1.536489] fbcon: inteldrmfb (fb0) is primary device
>[    1.536560] [drm:intel_crtc_cursor_set] cursor off
>[    1.536563] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0)
>[    1.536565] [drm:intel_set_config_compute_mode_changes] modes are different, full mode set
>[    1.536568] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    1.536572] [drm:drm_mode_debug_printmodeline] Modeline 28:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa
>[    1.536574] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=1, fb_changed=1
>[    1.536576] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    1.536579] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
>[    1.536582] [drm:connected_sink_compute_bpp] [CONNECTOR:14:eDP-1] checking for sink bpp constrains
>[    1.536585] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 0a pixel clock 138780KHz
>[    1.536591] [drm:intel_dp_compute_config] DP link bw 0a lane count 2 clock 270000 bpp 24
>[    1.536593] [drm:intel_dp_compute_config] DP link bw required 333072 available 432000
>[    1.536596] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0
>[    1.536598] [drm:intel_dump_pipe_config] [CRTC:5][modeset] config for pipe A
>[    1.536599] [drm:intel_dump_pipe_config] cpu_transcoder: D
>[    1.536600] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
>[    1.536602] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.536604] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64
>[    1.536605] [drm:intel_dump_pipe_config] requested mode:
>[    1.536608] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa
>[    1.536609] [drm:intel_dump_pipe_config] adjusted mode:
>[    1.536612] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa
>[    1.536615] [drm:intel_dump_crtc_timings] crtc timings: 138780 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x48 flags: 0xa
>[    1.536616] [drm:intel_dump_pipe_config] port clock: 270000
>[    1.536617] [drm:intel_dump_pipe_config] pipe src size: 1920x1080
>[    1.536619] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    1.536620] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    1.536621] [drm:intel_dump_pipe_config] ips: 1
>[    1.536621] [drm:intel_dump_pipe_config] double wide: 0
>[    1.551828] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0
>[    1.551834] [drm:intel_edp_backlight_off] 
>[    1.567978] [drm:intel_edp_panel_off] Turn eDP power off
>[    1.621820] usb 1-1: new low-speed USB device number 2 using xhci_hcd
>[    1.752757] [drm:wait_panel_off] Wait for panel power off time
>[    1.752760] [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control abcd0000
>[    1.789084] usb 1-1: New USB device found, idVendor=046d, idProduct=c077
>[    1.789086] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    1.789087] usb 1-1: Product: USB Optical Mouse
>[    1.789089] usb 1-1: Manufacturer: Logitech
>[    1.789208] usb 1-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
>[    1.791071] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:046D:C077.0001/input/input5
>[    1.791262] hid-generic 0003:046D:C077.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-1/input0
>[    1.807736] [drm:wait_panel_status] Wait complete
>[    1.807740] [drm:intel_update_fbc] no output, disabling
>[    1.807745] [drm:intel_display_power_put] disabling display
>[    1.807746] [drm:hsw_set_power_well] Requesting to disable the power well
>[    1.807758] [drm:ironlake_update_primary_plane] Writing base 00880000 00000000 0 0 7680
>[    1.807762] [drm:intel_crtc_mode_set] [ENCODER:13:TMDS-13] set [MODE:0:1920x1080]
>[    1.807763] [drm:intel_ddi_mode_set] Preparing DDI mode on port A, pipe A
>[    1.807766] [drm:intel_edp_panel_on] Turn eDP power on
>[    1.807768] [drm:wait_panel_power_cycle] Wait for panel power cycle
>[    1.930695] tsc: Refined TSC clocksource calibration: 1795.845 MHz
>[    1.943700] usb 1-5: new low-speed USB device number 3 using xhci_hcd
>[    2.112561] usb 1-5: New USB device found, idVendor=413c, idProduct=2107
>[    2.112564] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    2.112565] usb 1-5: Product: Dell USB Entry Keyboard
>[    2.112566] usb 1-5: Manufacturer: DELL
>[    2.112687] usb 1-5: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
>[    2.115850] input: DELL Dell USB Entry Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/0003:413C:2107.0002/input/input6
>[    2.115984] hid-generic 0003:413C:2107.0002: input,hidraw1: USB HID v1.11 Keyboard [DELL Dell USB Entry Keyboard] on usb-0000:00:14.0-5/input0
>[    2.353546] [drm:wait_panel_status] mask b800000f value 00000000 status 08000001 control abcd0000
>[    2.397522] [drm:wait_panel_status] Wait complete
>[    2.397525] [drm:wait_panel_on] Wait for panel power on
>[    2.397528] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd0003
>[    2.606446] [drm:wait_panel_status] Wait complete
>[    2.606449] [drm:_edp_panel_vdd_on] Turning eDP VDD on
>[    2.606455] [drm:_edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b
>[    2.607534] [drm:intel_dp_set_signal_levels] Using signal levels 00000000
>[    2.607990] [drm:intel_dp_start_link_train] clock recovery OK
>[    2.608748] [drm:intel_dp_complete_link_train] Channel EQ done. DP Training successful
>[    2.608952] [drm:intel_edp_backlight_on] 
>[    2.608956] [drm:intel_panel_enable_backlight] pipe A
>[    2.608960] [drm:intel_panel_actually_set_backlight] set backlight PWM = 937
>[    2.608963] [drm:intel_edp_psr_match_conditions] PSR disable by flag
>[    2.628438] [drm:intel_update_fbc] framebuffer not tiled or fenced, disabling compression
>[    2.628441] [drm:intel_connector_check_state] [CONNECTOR:14:eDP-1]
>[    2.628445] [drm:check_encoder_state] [ENCODER:13:TMDS-13]
>[    2.628446] [drm:check_encoder_state] [ENCODER:22:TMDS-22]
>[    2.628448] [drm:check_encoder_state] [ENCODER:25:TMDS-25]
>[    2.628449] [drm:check_crtc_state] [CRTC:5]
>[    2.628456] [drm:check_crtc_state] [CRTC:8]
>[    2.628457] [drm:check_crtc_state] [CRTC:11]
>[    2.628459] [drm:intel_crtc_cursor_set] cursor off
>[    2.628460] [drm:intel_crtc_set_config] [CRTC:8] [NOFB]
>[    2.628462] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[    2.628463] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    2.628464] [drm:intel_crtc_cursor_set] cursor off
>[    2.628465] [drm:intel_crtc_set_config] [CRTC:11] [NOFB]
>[    2.628466] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0
>[    2.628468] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    2.628472] Console: switching to colour frame buffer device 240x67
>[    2.628478] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0)
>[    2.628480] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[    2.628481] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    2.635978] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
>[    2.636012] i915 0000:00:02.0: registered panic notifier
>[    2.642908] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
>[    2.643568] acpi device:17: registered as cooling_device9
>[    2.643740] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7
>[    2.644083] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
>[    2.648487] dracut: Starting plymouth daemon
>[    2.656699] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0)
>[    2.656702] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[    2.656704] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    2.666789] [drm:i915_gem_open] 
>[    2.666815] [drm:intel_crtc_cursor_set] cursor off
>[    2.666818] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0)
>[    2.666822] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[    2.666825] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    2.666827] [drm:intel_crtc_cursor_set] cursor off
>[    2.666829] [drm:intel_crtc_set_config] [CRTC:8] [NOFB]
>[    2.666831] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[    2.666833] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    2.666834] [drm:intel_crtc_cursor_set] cursor off
>[    2.666836] [drm:intel_crtc_set_config] [CRTC:11] [NOFB]
>[    2.666838] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0
>[    2.666840] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    2.666850] [drm:i915_gem_open] 
>[    2.666859] [drm:intel_crtc_cursor_set] cursor off
>[    2.666861] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0)
>[    2.666863] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[    2.666865] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    2.666867] [drm:intel_crtc_cursor_set] cursor off
>[    2.666868] [drm:intel_crtc_set_config] [CRTC:8] [NOFB]
>[    2.666870] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[    2.666872] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    2.666873] [drm:intel_crtc_cursor_set] cursor off
>[    2.666875] [drm:intel_crtc_set_config] [CRTC:11] [NOFB]
>[    2.666877] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0
>[    2.666879] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    2.666885] [drm:i915_gem_open] 
>[    2.667132] [drm:intel_crtc_cursor_set] cursor off
>[    2.667136] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0)
>[    2.667140] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[    2.667143] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    2.667145] [drm:intel_crtc_cursor_set] cursor off
>[    2.667147] [drm:intel_crtc_set_config] [CRTC:8] [NOFB]
>[    2.667150] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[    2.667153] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    2.667156] [drm:intel_crtc_cursor_set] cursor off
>[    2.667158] [drm:intel_crtc_set_config] [CRTC:11] [NOFB]
>[    2.667161] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0
>[    2.667164] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    2.667357] dracut: error: unexpectedly disconnected from boot status daemon
>[    2.673424] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0)
>[    2.673427] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[    2.673429] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    2.740888] ACPI: AC Adapter [ADP1] (on-line)
>[    2.759990] ppdev: user-space parallel port driver
>[    2.763378] ACPI: Battery Slot [BAT0] (battery present)
>[    2.763469] ACPI: Battery Slot [BAT1] (battery absent)
>[    2.763578] ACPI: Battery Slot [BAT2] (battery absent)
>[    2.781494] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182f conflicts with OpRegion 0x0000000000001800-0x000000000000187f (\PMIO) (20131218/utaddress-258)
>[    2.781666] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[    2.781773] ACPI Warning: SystemIO range 0x0000000000000830-0x000000000000083f conflicts with OpRegion 0x0000000000000800-0x000000000000083f (\GPRL) (20131218/utaddress-258)
>[    2.781938] ACPI Warning: SystemIO range 0x0000000000000830-0x000000000000083f conflicts with OpRegion 0x0000000000000800-0x0000000000000bff (\GPR_) (20131218/utaddress-258)
>[    2.782102] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[    2.782205] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082f conflicts with OpRegion 0x0000000000000800-0x000000000000083f (\GPRL) (20131218/utaddress-258)
>[    2.782396] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082f conflicts with OpRegion 0x0000000000000800-0x0000000000000bff (\GPR_) (20131218/utaddress-258)
>[    2.782561] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082f conflicts with OpRegion 0x0000000000000810-0x0000000000000813 (\_PR_.IO_D) (20131218/utaddress-258)
>[    2.782729] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[    2.782832] lpc_ich: Resource conflict(s) found affecting gpio_ich
>[    2.786474] snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002)
>[    2.787148] iTCO_vendor_support: vendor-support=0
>[    2.787344] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
>[    2.787381] iTCO_wdt: Found a Wildcat Point_LP TCO device (Version=2, TCOBASE=0x1860)
>[    2.787789] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>[    2.801400] ALSA sound/pci/hda/hda_i915.c:58 HDA driver get symbol successfully from i915 module
>[    2.801405] [drm:intel_display_power_get] enabling display
>[    2.801410] [drm:hsw_set_power_well] Enabling power well
>[    2.801450] snd_hda_intel 0000:00:03.0: irq 60 for MSI/MSI-X
>[    2.801510] i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003)
>[    2.803871] ACPI Warning: SystemIO range 0x000000000000efa0-0x000000000000efbf conflicts with OpRegion 0x000000000000efa0-0x000000000000efaf (\_SB_.PCI0.SBUS.SMBI) (20131218/utaddress-258)
>[    2.806147] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[    2.810103] input: PC Speaker as /devices/platform/pcspkr/input/input8
>[    2.834842] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0)
>[    2.834846] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[    2.834848] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    2.848618] EXT4-fs (sda2): INFO: recovery required on readonly filesystem
>[    2.850901] EXT4-fs (sda2): write access will be enabled during recovery
>[    2.869571] EXT4-fs (sda2): recovery complete
>[    2.872046] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
>[    2.897338] dracut: Checking ext4: /dev/sda2
>[    2.899741] dracut: issuing e2fsck -a  /dev/sda2
>[    2.911007] dracut: /dev/sda2: clean, 690687/13598720 files, 22867332/54372608 blocks
>[    2.913683] dracut: Remounting /dev/sda2 with -o errors=remount-ro,ro
>[    2.926188] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: errors=remount-ro
>[    2.930359] Switched to clocksource tsc
>[    2.932507] dracut: Mounted root filesystem /dev/sda2
>[    2.944754] device-mapper: uevent: version 1.0.3
>[    2.947197] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
>[    2.968964] dracut: Switching root
>[    3.002676] random: init urandom read with 85 bits of entropy available
>[    3.038404] init: ureadahead main process (2704) terminated with status 5
>[    3.137004] systemd-udevd[2814]: starting version 204
>[    3.196064] random: nonblocking pool is initialized
>[    3.282292] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0)
>[    3.282297] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[    3.282300] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    3.301001] systemd-udevd[3407]: could not open moddep file '/lib/modules/3.14.0_kcloud_1d7da0_20140521+/modules.dep.bin'
>[    3.303357] init: Failed to spawn ufw pre-start process: unable to execute: No such file or directory
>[    3.307965] init: Failed to spawn ufw post-stop process: unable to execute: No such file or directory
>[    3.317672] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0)
>[    3.317676] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[    3.317679] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    3.329299] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0)
>[    3.329303] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[    3.329305] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    3.370705] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0)
>[    3.370710] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[    3.370713] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    3.384618] init: Failed to spawn ufw pre-start process: unable to execute: No such file or directory
>[    3.385882] Adding 16440316k swap on /dev/sda3.  Priority:-1 extents:1 across:16440316k SS
>[    3.386861] init: Failed to spawn ufw post-stop process: unable to execute: No such file or directory
>[    3.425991] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
>[    3.509290] init: Failed to spawn ufw pre-start process: unable to execute: No such file or directory
>[    3.512548] init: Failed to spawn ufw post-stop process: unable to execute: No such file or directory
>[    3.572817] init: failsafe main process (3714) killed by TERM signal
>[    3.587616] init: Failed to spawn bluetooth main process: unable to execute: No such file or directory
>[    3.596044] init: Failed to spawn ufw pre-start process: unable to execute: No such file or directory
>[    3.601893] init: Failed to spawn ufw post-stop process: unable to execute: No such file or directory
>[    3.733253] init: avahi-cups-reload main process (3843) terminated with status 1
>[    3.797582] init: Failed to spawn hybrid-gfx main process: unable to execute: No such file or directory
>[    3.948138] e1000e 0000:00:19.0: irq 57 for MSI/MSI-X
>[    4.048961] e1000e 0000:00:19.0: irq 57 for MSI/MSI-X
>[    4.128522] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0)
>[    4.128527] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[    4.128530] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    4.138854] init: lightdm main process (3986) terminated with status 1
>[    4.145130] init: plymouth-ready (started) main process (3545) terminated with status 1
>[    4.505766] [drm:edp_panel_vdd_off_sync] Turning eDP VDD off
>[    4.505776] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007
>[    5.571971] e1000e: eth3 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
>[    5.571975] e1000e 0000:00:19.0 eth3: 10/100 speed: disabling TSO
>[    8.932390] init: failsafe-x main process (4209) terminated with status 127
>[   32.730355] [drm:i915_gem_open] 
>[   32.730381] [drm:intel_crtc_cursor_set] cursor off
>[   32.730385] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0)
>[   32.730389] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[   32.730392] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[   32.730394] [drm:intel_crtc_cursor_set] cursor off
>[   32.730396] [drm:intel_crtc_set_config] [CRTC:8] [NOFB]
>[   32.730398] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[   32.730400] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[   32.730402] [drm:intel_crtc_cursor_set] cursor off
>[   32.730403] [drm:intel_crtc_set_config] [CRTC:11] [NOFB]
>[   32.730405] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0
>[   32.730407] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[   32.730416] [drm:i915_gem_open] 
>[   32.730713] [drm:i915_gem_open] 
>[   32.730732] [drm:i915_gem_open] 
>[   32.730787] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[4] ENCODERS[3]
>[   32.730799] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[4] ENCODERS[3]
>[   32.730811] [drm:drm_mode_getconnector] [CONNECTOR:14:?]
>[   32.730815] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:14:eDP-1]
>[   32.730820] [drm:intel_dp_detect] [CONNECTOR:14:eDP-1]
>[   32.730833] [drm:drm_edid_to_eld] ELD: no CEA Extension found
>[   32.730840] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:14:eDP-1] probed modes :
>[   32.730846] [drm:drm_mode_debug_printmodeline] Modeline 15:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa
>[   32.730851] [drm:drm_mode_debug_printmodeline] Modeline 16:"1920x1080" 40 92520 1920 1966 1996 2080 1080 1082 1086 1112 0x40 0xa
>[   32.730856] [drm:drm_mode_getconnector] [CONNECTOR:14:?]
>[   32.730898] [drm:drm_mode_getconnector] [CONNECTOR:23:?]
>[   32.730901] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:23:DP-1]
>[   32.730905] [drm:intel_dp_detect] [CONNECTOR:23:DP-1]
>[   32.730910] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:23:DP-1] disconnected
>[   32.730913] [drm:drm_mode_getconnector] [CONNECTOR:23:?]
>[   32.730916] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:23:DP-1]
>[   32.730919] [drm:intel_dp_detect] [CONNECTOR:23:DP-1]
>[   32.730924] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:23:DP-1] disconnected
>[   32.730941] [drm:drm_mode_getconnector] [CONNECTOR:24:?]
>[   32.730943] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:24:HDMI-A-1]
>[   32.730945] [drm:intel_hdmi_detect] [CONNECTOR:24:HDMI-A-1]
>[   32.731104] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
>[   32.731106] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
>[   32.731108] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:24:HDMI-A-1] disconnected
>[   32.731110] [drm:drm_mode_getconnector] [CONNECTOR:24:?]
>[   32.731112] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:24:HDMI-A-1]
>[   32.731114] [drm:intel_hdmi_detect] [CONNECTOR:24:HDMI-A-1]
>[   32.731267] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
>[   32.731269] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
>[   32.731271] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:24:HDMI-A-1] disconnected
>[   32.731286] [drm:drm_mode_getconnector] [CONNECTOR:26:?]
>[   32.731288] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:26:HDMI-A-2]
>[   32.731290] [drm:intel_hdmi_detect] [CONNECTOR:26:HDMI-A-2]
>[   32.731448] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[   32.731449] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[   32.731451] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:26:HDMI-A-2] disconnected
>[   32.731453] [drm:drm_mode_getconnector] [CONNECTOR:26:?]
>[   32.731455] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:26:HDMI-A-2]
>[   32.731456] [drm:intel_hdmi_detect] [CONNECTOR:26:HDMI-A-2]
>[   32.731615] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[   32.731623] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[   32.731631] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:26:HDMI-A-2] disconnected
>[   32.733804] [drm:drm_mode_setcrtc] [CRTC:5]
>[   32.733808] [drm:intel_crtc_set_config] [CRTC:5] [NOFB]
>[   32.733812] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=1, fb_changed=0
>[   32.733814] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [NOCRTC]
>[   32.733816] [drm:intel_modeset_stage_output_state] encoder changed, full mode switch
>[   32.733818] [drm:intel_modeset_stage_output_state] crtc changed, full mode switch
>[   32.733820] [drm:intel_modeset_stage_output_state] crtc disabled, full mode switch
>[   32.733823] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 1
>[   32.765590] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0
>[   32.765597] [drm:intel_edp_backlight_off] 
>[   32.781590] [drm:_edp_panel_vdd_on] Turning eDP VDD on
>[   32.781597] [drm:_edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b
>[   32.781750] [drm:intel_edp_panel_off] Turn eDP power off
>[   32.966521] [drm:wait_panel_off] Wait for panel power off time
>[   32.966526] [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control abcd0000
>[   33.021499] [drm:wait_panel_status] Wait complete
>[   33.021505] [drm:intel_update_fbc] no output, disabling
>[   33.021511] [drm:intel_display_power_put] disabling always-on
>[   33.021516] [drm:check_encoder_state] [ENCODER:13:TMDS-13]
>[   33.021518] [drm:check_encoder_state] [ENCODER:22:TMDS-22]
>[   33.021520] [drm:check_encoder_state] [ENCODER:25:TMDS-25]
>[   33.021522] [drm:check_crtc_state] [CRTC:5]
>[   33.021525] [drm:check_crtc_state] [CRTC:8]
>[   33.021527] [drm:check_crtc_state] [CRTC:11]
>[   33.021532] [drm:drm_mode_setcrtc] [CRTC:8]
>[   33.021534] [drm:intel_crtc_set_config] [CRTC:8] [NOFB]
>[   33.021536] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[   33.021539] [drm:drm_mode_setcrtc] [CRTC:11]
>[   33.021541] [drm:intel_crtc_set_config] [CRTC:11] [NOFB]
>[   33.021543] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0
>[   33.744291] [drm:intel_display_power_put] disabling display
>[   33.744296] [drm:hsw_set_power_well] Requesting to disable the power well
>[   33.744319] ------------[ cut here ]------------
>[   33.744334] WARNING: CPU: 0 PID: 4 at drivers/gpu/drm/i915/i915_drv.c:974 intel_runtime_suspend+0x3d/0x148 [i915]()
>[   33.744336] Modules linked in: dm_mod snd_hda_codec_hdmi pcspkr i2c_i801 iTCO_wdt iTCO_vendor_support snd_hda_intel lpc_ich snd_hda_codec mfd_core snd_hwdep snd_pcm snd_timer snd soundcore battery ppdev parport_pc parport ac acpi_cpufreq i915 video button drm_kms_helper drm
>[   33.744353] CPU: 0 PID: 4 Comm: kworker/0:0 Not tainted 3.14.0_kcloud_1d7da0_20140521+ #32
>[   33.744358] Workqueue: pm pm_runtime_work
>[   33.744359]  0000000000000006 ffffffff816fd068 0000000000000000 ffffffff81033e44
>[   33.744362]  ffffffffa0060507 ffff880145538000 ffff8800aaa9b000 ffff88014a333dd8
>[   33.744365]  0000000000000000 ffffffffa0060507 ffff880149839898 ffffffffa00c7230
>[   33.744368] Call Trace:
>[   33.744373]  [<ffffffff816fd068>] ? dump_stack+0x41/0x51
>[   33.744377]  [<ffffffff81033e44>] ? warn_slowpath_common+0x6f/0x84
>[   33.744387]  [<ffffffffa0060507>] ? intel_runtime_suspend+0x3d/0x148 [i915]
>[   33.744397]  [<ffffffffa0060507>] ? intel_runtime_suspend+0x3d/0x148 [i915]
>[   33.744401]  [<ffffffff812ee511>] ? pci_pm_runtime_suspend+0x57/0x109
>[   33.744405]  [<ffffffff8137723f>] ? __rpm_callback+0x27/0x4a
>[   33.744409]  [<ffffffff813772ad>] ? rpm_callback+0x4b/0x6b
>[   33.744412]  [<ffffffff8137784d>] ? rpm_suspend+0x2aa/0x3f1
>[   33.744416]  [<ffffffff8157fe0f>] ? e1000_watchdog_task+0x747/0x756
>[   33.744418]  [<ffffffff813784ab>] ? pm_runtime_work+0x6d/0x77
>[   33.744422]  [<ffffffff81045057>] ? process_one_work+0x1c1/0x2ca
>[   33.744425]  [<ffffffff810455a5>] ? worker_thread+0x1c9/0x2ad
>[   33.744428]  [<ffffffff810453dc>] ? rescuer_thread+0x259/0x259
>[   33.744432]  [<ffffffff81049b2a>] ? kthread+0xca/0xd2
>[   33.744435]  [<ffffffff81049a60>] ? kthread_create_on_node+0x15d/0x15d
>[   33.744439]  [<ffffffff8170743c>] ? ret_from_fork+0x7c/0xb0
>[   33.744442]  [<ffffffff81049a60>] ? kthread_create_on_node+0x15d/0x15d
>[   33.744444] ---[ end trace 576d21341dcef210 ]---
>[   33.744454] pci_pm_runtime_suspend(): intel_runtime_suspend+0x0/0x148 [i915] returns -19
>[   33.822034] [drm:intel_crtc_cursor_set] cursor off
>[   33.822036] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0)
>[   33.822037] [drm:intel_set_config_compute_mode_changes] inactive crtc, full mode set
>[   33.822039] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=1, fb_changed=0
>[   33.822040] [drm:intel_modeset_stage_output_state] encoder changed, full mode switch
>[   33.822042] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[   33.822042] [drm:intel_modeset_stage_output_state] crtc changed, full mode switch
>[   33.822043] [drm:intel_modeset_stage_output_state] crtc enabled, full mode switch
>[   33.822045] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
>[   33.822047] [drm:connected_sink_compute_bpp] [CONNECTOR:14:eDP-1] checking for sink bpp constrains
>[   33.822050] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 0a pixel clock 138780KHz
>[   33.822055] [drm:intel_dp_compute_config] DP link bw 0a lane count 2 clock 270000 bpp 24
>[   33.822056] [drm:intel_dp_compute_config] DP link bw required 333072 available 432000
>[   33.822058] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0
>[   33.822060] [drm:intel_dump_pipe_config] [CRTC:5][modeset] config for pipe A
>[   33.822060] [drm:intel_dump_pipe_config] cpu_transcoder: D
>[   33.822061] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
>[   33.822063] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[   33.822064] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64
>[   33.822065] [drm:intel_dump_pipe_config] requested mode:
>[   33.822068] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa
>[   33.822068] [drm:intel_dump_pipe_config] adjusted mode:
>[   33.822070] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa
>[   33.822072] [drm:intel_dump_crtc_timings] crtc timings: 138780 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x48 flags: 0xa
>[   33.822073] [drm:intel_dump_pipe_config] port clock: 270000
>[   33.822074] [drm:intel_dump_pipe_config] pipe src size: 1920x1080
>[   33.822075] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[   33.822077] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[   33.822077] [drm:intel_dump_pipe_config] ips: 1
>[   33.822078] [drm:intel_dump_pipe_config] double wide: 0
>[   33.822081] [drm:intel_display_power_get] enabling always-on
>[   33.822093] [drm:ironlake_update_primary_plane] Writing base 00880000 00000000 0 0 7680
>[   33.822096] [drm:intel_crtc_mode_set] [ENCODER:13:TMDS-13] set [MODE:0:1920x1080]
>[   33.822098] [drm:intel_ddi_mode_set] Preparing DDI mode on port A, pipe A
>[   33.822099] [drm:intel_edp_panel_on] Turn eDP power on
>[   33.822102] [drm:wait_panel_power_cycle] Wait for panel power cycle
>[   33.822105] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0000
>[   33.822107] [drm:wait_panel_status] Wait complete
>[   33.822110] [drm:wait_panel_on] Wait for panel power on
>[   33.822113] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd0003
>[   34.030135] [drm:wait_panel_status] Wait complete
>[   34.030138] [drm:_edp_panel_vdd_on] Turning eDP VDD on
>[   34.030144] [drm:_edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b
>[   34.031205] [drm:intel_dp_set_signal_levels] Using signal levels 00000000
>[   34.031652] [drm:intel_dp_start_link_train] clock recovery OK
>[   34.032399] [drm:intel_dp_complete_link_train] Channel EQ done. DP Training successful
>[   34.032598] [drm:intel_edp_backlight_on] 
>[   34.032602] [drm:intel_panel_enable_backlight] pipe A
>[   34.032607] [drm:intel_panel_actually_set_backlight] set backlight PWM = 937
>[   34.032609] [drm:intel_edp_psr_match_conditions] PSR disable by flag
>[   34.052125] [drm:intel_update_fbc] framebuffer not tiled or fenced, disabling compression
>[   34.052129] [drm:intel_connector_check_state] [CONNECTOR:14:eDP-1]
>[   34.052132] [drm:check_encoder_state] [ENCODER:13:TMDS-13]
>[   34.052133] [drm:check_encoder_state] [ENCODER:22:TMDS-22]
>[   34.052135] [drm:check_encoder_state] [ENCODER:25:TMDS-25]
>[   34.052136] [drm:check_crtc_state] [CRTC:5]
>[   34.052142] [drm:check_crtc_state] [CRTC:8]
>[   34.052143] [drm:check_crtc_state] [CRTC:11]
>[   34.052146] [drm:intel_crtc_cursor_set] cursor off
>[   34.052147] [drm:intel_crtc_set_config] [CRTC:8] [NOFB]
>[   34.052148] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[   34.052150] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[   34.052151] [drm:intel_crtc_cursor_set] cursor off
>[   34.052152] [drm:intel_crtc_set_config] [CRTC:11] [NOFB]
>[   34.052153] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0
>[   34.052154] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[   34.052157] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0)
>[   34.052159] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[   34.052160] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[   34.052169] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0)
>[   34.052170] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[   34.052171] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[   34.059268] [drm:intel_crtc_cursor_set] cursor off
>[   34.059273] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0)
>[   34.059275] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[   34.059278] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[   34.059280] [drm:intel_crtc_cursor_set] cursor off
>[   34.059282] [drm:intel_crtc_set_config] [CRTC:8] [NOFB]
>[   34.059284] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[   34.059286] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[   34.059287] [drm:intel_crtc_cursor_set] cursor off
>[   34.059289] [drm:intel_crtc_set_config] [CRTC:11] [NOFB]
>[   34.059291] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0
>[   34.059293] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[   35.782506] [drm:edp_panel_vdd_off_sync] Turning eDP VDD off
>[   35.782513] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007
>[   61.770011] usb 1-1: USB disconnect, device number 2
>[   63.289615] usb 1-1: new low-speed USB device number 4 using xhci_hcd
>[   63.456909] usb 1-1: New USB device found, idVendor=046d, idProduct=c077
>[   63.456913] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[   63.456915] usb 1-1: Product: USB Optical Mouse
>[   63.456917] usb 1-1: Manufacturer: Logitech
>[   63.457044] usb 1-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
>[   63.458920] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:046D:C077.0003/input/input9
>[   63.459126] hid-generic 0003:046D:C077.0003: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-1/input0

Actions: View

Attachments on bug 78948: 99391 | 99465

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.