Attachment 102000 Details for Bug 80517 – dmesg

dmesg

80517.dmesg (text/plain), 116.30 KB, created by Guo Jinxian on 2014-06-30 08:20:15 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Guo Jinxian

Created: 2014-06-30 08:20:15 UTC

Size: 116.30 KB

patch

obsolete

>[    0.000000] e820: last_pfn = 0xdbe12 max_arch_pfn = 0x400000000
>[    0.000000] found SMP MP-table at [mem 0x000fd940-0x000fd94f] mapped at [ffff8800000fd940]
>[    0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
>[    0.000000] Using GB pages for direct mapping
>[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
>[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
>[    0.000000] BRK [0x0339a000, 0x0339afff] PGTABLE
>[    0.000000] BRK [0x0339b000, 0x0339bfff] PGTABLE
>[    0.000000] BRK [0x0339c000, 0x0339cfff] PGTABLE
>[    0.000000] init_memory_mapping: [mem 0x11ec00000-0x11edfffff]
>[    0.000000]  [mem 0x11ec00000-0x11edfffff] page 2M
>[    0.000000] BRK [0x0339d000, 0x0339dfff] PGTABLE
>[    0.000000] init_memory_mapping: [mem 0x11c000000-0x11ebfffff]
>[    0.000000]  [mem 0x11c000000-0x11ebfffff] page 2M
>[    0.000000] init_memory_mapping: [mem 0x100000000-0x11bffffff]
>[    0.000000]  [mem 0x100000000-0x11bffffff] page 2M
>[    0.000000] init_memory_mapping: [mem 0x00100000-0xd18f4fff]
>[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
>[    0.000000]  [mem 0x00200000-0x3fffffff] page 2M
>[    0.000000]  [mem 0x40000000-0xbfffffff] page 1G
>[    0.000000]  [mem 0xc0000000-0xd17fffff] page 2M
>[    0.000000]  [mem 0xd1800000-0xd18f4fff] page 4k
>[    0.000000] init_memory_mapping: [mem 0xd18fc000-0xd1d2cfff]
>[    0.000000]  [mem 0xd18fc000-0xd19fffff] page 4k
>[    0.000000]  [mem 0xd1a00000-0xd1bfffff] page 2M
>[    0.000000]  [mem 0xd1c00000-0xd1d2cfff] page 4k
>[    0.000000] BRK [0x0339e000, 0x0339efff] PGTABLE
>[    0.000000] init_memory_mapping: [mem 0xd21ad000-0xd7eeafff]
>[    0.000000]  [mem 0xd21ad000-0xd21fffff] page 4k
>[    0.000000]  [mem 0xd2200000-0xd7dfffff] page 2M
>[    0.000000]  [mem 0xd7e00000-0xd7eeafff] page 4k
>[    0.000000] BRK [0x0339f000, 0x0339ffff] PGTABLE
>[    0.000000] init_memory_mapping: [mem 0xd8000000-0xd8760fff]
>[    0.000000]  [mem 0xd8000000-0xd85fffff] page 2M
>[    0.000000]  [mem 0xd8600000-0xd8760fff] page 4k
>[    0.000000] init_memory_mapping: [mem 0xd8800000-0xd8fb0fff]
>[    0.000000]  [mem 0xd8800000-0xd8dfffff] page 2M
>[    0.000000]  [mem 0xd8e00000-0xd8fb0fff] page 4k
>[    0.000000] init_memory_mapping: [mem 0xd9000000-0xda71bfff]
>[    0.000000]  [mem 0xd9000000-0xda5fffff] page 2M
>[    0.000000]  [mem 0xda600000-0xda71bfff] page 4k
>[    0.000000] init_memory_mapping: [mem 0xda800000-0xdbe11fff]
>[    0.000000]  [mem 0xda800000-0xdbdfffff] page 2M
>[    0.000000]  [mem 0xdbe00000-0xdbe11fff] page 4k
>[    0.000000] ACPI: Early table checksum verification disabled
>[    0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 DELL  )
>[    0.000000] ACPI: XSDT 0x00000000D8FEE088 000094 (v01 DELL   CBX3     01072009 AMI  00010013)
>[    0.000000] ACPI: FACP 0x00000000D8FF94B0 00010C (v05 DELL   CBX3     01072009 AMI  00010013)
>[    0.000000] ACPI: DSDT 0x00000000D8FEE1B0 00B2FD (v02 DELL   CBX3     00000014 INTL 20091112)
>[    0.000000] ACPI: FACS 0x00000000DA7FE080 000040
>[    0.000000] ACPI: APIC 0x00000000D8FF95C0 000092 (v03 DELL   CBX3     01072009 AMI  00010013)
>[    0.000000] ACPI: FPDT 0x00000000D8FF9658 000044 (v01 DELL   CBX3     01072009 AMI  00010013)
>[    0.000000] ACPI: SLIC 0x00000000D8FF96A0 000176 (v03 DELL   CBX3     01072009 MSFT 00010013)
>[    0.000000] ACPI: LPIT 0x00000000D8FF9818 00005C (v01 DELL   CBX3     00000000 AMI. 00000005)
>[    0.000000] ACPI: SSDT 0x00000000D8FF9878 000539 (v01 PmRef  Cpu0Ist  00003000 INTL 20120711)
>[    0.000000] ACPI: SSDT 0x00000000D8FF9DB8 000AD8 (v01 PmRef  CpuPm    00003000 INTL 20120711)
>[    0.000000] ACPI: SSDT 0x00000000D8FFA890 0001C7 (v01 PmRef  LakeTiny 00003000 INTL 20120711)
>[    0.000000] ACPI: HPET 0x00000000D8FFAA58 000038 (v01 DELL   CBX3     01072009 AMI. 00000005)
>[    0.000000] ACPI: SSDT 0x00000000D8FFAA90 00036D (v01 SataRe SataTabl 00001000 INTL 20120711)
>[    0.000000] ACPI: MCFG 0x00000000D8FFAE00 00003C (v01 DELL   CBX3     01072009 MSFT 00000097)
>[    0.000000] ACPI: SSDT 0x00000000D8FFAE40 003406 (v01 SaSsdt SaSsdt   00003000 INTL 20091112)
>[    0.000000] ACPI: ASF! 0x00000000D8FFE248 0000A5 (v32 INTEL   HCG     00000001 TFSM 000F4240)
>[    0.000000] ACPI: DMAR 0x00000000D8FFE2F0 0000B8 (v01 INTEL  HSW      00000001 INTL 00000001)
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] No NUMA configuration found
>[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000011edfffff]
>[    0.000000] Initmem setup node 0 [mem 0x00000000-0x11edfffff]
>[    0.000000]   NODE_DATA [mem 0x11edf5000-0x11edf8fff]
>[    0.000000]  [ffffea0000000000-ffffea00047fffff] PMD -> [ffff88011a400000-ffff88011e3fffff] on node 0
>[    0.000000] Zone ranges:
>[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
>[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
>[    0.000000]   Normal   [mem 0x100000000-0x11edfffff]
>[    0.000000] Movable zone start for each node
>[    0.000000] Early memory node ranges
>[    0.000000]   node   0: [mem 0x00001000-0x0009cfff]
>[    0.000000]   node   0: [mem 0x00100000-0xd18f4fff]
>[    0.000000]   node   0: [mem 0xd18fc000-0xd1d2cfff]
>[    0.000000]   node   0: [mem 0xd21ad000-0xd7eeafff]
>[    0.000000]   node   0: [mem 0xd8000000-0xd8760fff]
>[    0.000000]   node   0: [mem 0xd8800000-0xd8fb0fff]
>[    0.000000]   node   0: [mem 0xd9000000-0xda71bfff]
>[    0.000000]   node   0: [mem 0xda800000-0xdbe11fff]
>[    0.000000]   node   0: [mem 0x100000000-0x11edfffff]
>[    0.000000] On node 0 totalpages: 1025088
>[    0.000000]   DMA zone: 64 pages used for memmap
>[    0.000000]   DMA zone: 21 pages reserved
>[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
>[    0.000000]   DMA32 zone: 13979 pages used for memmap
>[    0.000000]   DMA32 zone: 894628 pages, LIFO batch:31
>[    0.000000]   Normal zone: 1976 pages used for memmap
>[    0.000000]   Normal zone: 126464 pages, LIFO batch:31
>[    0.000000] Reserving Intel graphics stolen memory at 0xdd200000-0xdf1fffff
>[    0.000000] ACPI: PM-Timer IO Port: 0x1808
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
>[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>[    0.000000] ACPI: IRQ0 used by override.
>[    0.000000] ACPI: IRQ2 used by override.
>[    0.000000] ACPI: IRQ9 used by override.
>[    0.000000] Using ACPI (MADT) for SMP configuration information
>[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
>[    0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
>[    0.000000] nr_irqs_gsi: 40
>[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
>[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xd18f5000-0xd18fbfff]
>[    0.000000] PM: Registered nosave memory: [mem 0xd1d2d000-0xd21acfff]
>[    0.000000] PM: Registered nosave memory: [mem 0xd7eeb000-0xd7ffffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xd8761000-0xd87fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xd8fb1000-0xd8ffffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xda71c000-0xda7fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xdbe12000-0xdbffffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xdc000000-0xdcffffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xdd000000-0xdf1fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xdf200000-0xf7ffffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
>[    0.000000] e820: [mem 0xdf200000-0xf7ffffff] available for PCI devices
>[    0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
>[    0.000000] PERCPU: Embedded 27 pages/cpu @ffff88011ea00000 s78464 r8192 d23936 u262144
>[    0.000000] pcpu-alloc: s78464 r8192 d23936 u262144 alloc=1*2097152
>[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
>[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1009048
>[    0.000000] Policy zone: Normal
>[    0.000000] Kernel command line: BOOT_IMAGE=kernels//nightly_parents/2014_06_30/drm-intel-nightly/1087d4bf01e79523898c6c31615bf0c369e0039a/bzImage_x86_64 root=/dev/sda3 drm.debug=0xe modules_path=kernels//nightly_parents/2014_06_30/drm-intel-nightly/1087d4bf01e79523898c6c31615bf0c369e0039a/modules_x86_64/lib/modules/3.16.0-rc2_drm-intel-nightly_1087d4_20140630+
>[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
>[    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
>[    0.000000] AGP: Checking aperture...
>[    0.000000] AGP: No AGP bridge found
>[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
>[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>[    0.000000] Memory: 3931216K/4100352K available (7718K kernel code, 883K rwdata, 3932K rodata, 23248K init, 620K bss, 169136K reserved)
>[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
>[    0.000000] Hierarchical RCU implementation.
>[    0.000000] 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
>[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
>[    0.000000] NR_IRQS:4352 nr_irqs:744 16
>[    0.000000] Console: colour VGA+ 80x25
>[    0.000000] console [tty0] enabled
>[    0.000000] hpet clockevent registered
>[    0.000000] tsc: Fast TSC calibration using PIT
>[    0.000000] tsc: Detected 3392.301 MHz processor
>[    0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 6784.60 BogoMIPS (lpj=3392301)
>[    0.000193] pid_max: default: 32768 minimum: 301
>[    0.000290] ACPI: Core revision 20140424
>[    0.006444] ACPI: All ACPI Tables successfully acquired
>[    0.006632] Security Framework initialized
>[    0.006862] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
>[    0.007894] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
>[    0.008400] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
>[    0.008499] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
>[    0.008756] CPU: Physical Processor ID: 0
>[    0.008848] CPU: Processor Core ID: 0
>[    0.009664] mce: CPU supports 9 MCE banks
>[    0.009764] CPU0: Thermal LVT vector (0xfa) already installed
>[    0.009770] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
>Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
>tlb_flushall_shift: 6
>[    0.010076] Freeing SMP alternatives memory: 32K (ffffffff832f5000 - ffffffff832fd000)
>[    0.010658] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>[    0.020761] smpboot: CPU0: Intel(R) Core(TM) i7-4770 CPU @ 3.40GHz (fam: 06, model: 3c, stepping: 03)
>[    0.022453] TSC deadline timer enabled
>[    0.022468] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
>[    0.022811] ... version:                3
>[    0.022904] ... bit width:              48
>[    0.022996] ... generic registers:      4
>[    0.023088] ... value mask:             0000ffffffffffff
>[    0.023182] ... max period:             0000ffffffffffff
>[    0.023277] ... fixed-purpose events:   3
>[    0.023369] ... event mask:             000000070000000f
>[    0.023642] x86: Booting SMP configuration:
>[    0.023735] .... node  #0, CPUs:      #1
>[    0.035789] CPU1: Thermal LVT vector (0xfa) already installed
>[    0.037952]  #2
>[    0.049933] CPU2: Thermal LVT vector (0xfa) already installed
>[    0.063906]  #3
>[    0.063906] CPU3: Thermal LVT vector (0xfa) already installed
>[    0.077937]  #4
>[    0.077937] CPU4: Thermal LVT vector (0xfa) already installed
>[    0.091997]  #5
>[    0.091997] CPU5: Thermal LVT vector (0xfa) already installed
>[    0.106065]  #6
>[    0.106065] CPU6: Thermal LVT vector (0xfa) already installed
>[    0.120128]  #7
>[    0.120129] CPU7: Thermal LVT vector (0xfa) already installed
>[    0.122196] x86: Booted up 1 node, 8 CPUs
>[    0.122376] smpboot: Total of 8 processors activated (54276.81 BogoMIPS)
>[    0.127902] devtmpfs: initialized
>[    0.128156] PM: Registering ACPI NVS region [mem 0xd18f5000-0xd18fbfff] (28672 bytes)
>[    0.128305] PM: Registering ACPI NVS region [mem 0xda71c000-0xda7fffff] (933888 bytes)
>[    0.128587] xor: automatically using best checksumming function:
>[    0.137797]    avx       : 37460.000 MB/sec
>[    0.137911] RTC time:  8:08:44, date: 06/30/14
>[    0.138036] NET: Registered protocol family 16
>[    0.138238] cpuidle: using governor ladder
>[    0.138331] cpuidle: using governor menu
>[    0.138470] ACPI: bus type PCI registered
>[    0.138601] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
>[    0.138753] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
>[    0.138883] PCI: Using configuration type 1 for base access
>[    0.138981] dmi type 0xB1 record - unknown flag
>[    0.156874] raid6: sse2x1   11792 MB/s
>[    0.173890] raid6: sse2x2   14707 MB/s
>[    0.190908] raid6: sse2x4   17398 MB/s
>[    0.207925] raid6: avx2x1   23320 MB/s
>[    0.224942] raid6: avx2x2   26527 MB/s
>[    0.241957] raid6: avx2x4   31078 MB/s
>[    0.242049] raid6: using algorithm avx2x4 (31078 MB/s)
>[    0.242143] raid6: using avx2x2 recovery algorithm
>[    0.242263] ACPI: Added _OSI(Module Device)
>[    0.242355] ACPI: Added _OSI(Processor Device)
>[    0.242448] ACPI: Added _OSI(3.0 _SCP Extensions)
>[    0.242541] ACPI: Added _OSI(Processor Aggregator Device)
>[    0.244629] ACPI: Executed 1 blocks of module-level executable AML code
>[    0.246152] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
>[    0.252025] ACPI: Dynamic OEM Table Load:
>[    0.252194] ACPI: SSDT 0xFFFF88011A027400 0003D3 (v01 PmRef  Cpu0Cst  00003001 INTL 20120711)
>[    0.257102] ACPI: Dynamic OEM Table Load:
>[    0.257270] ACPI: SSDT 0xFFFF880119487000 0005AA (v01 PmRef  ApIst    00003000 INTL 20120711)
>[    0.262028] ACPI: Dynamic OEM Table Load:
>[    0.262196] ACPI: SSDT 0xFFFF880119381200 000119 (v01 PmRef  ApCst    00003000 INTL 20120711)
>[    0.266651] ACPI: Interpreter enabled
>[    0.266748] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
>[    0.266974] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
>[    0.267210] ACPI: (supports S0 S3 S4 S5)
>[    0.267303] ACPI: Using IOAPIC for interrupt routing
>[    0.267416] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>[    0.308639] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
>[    0.308739] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
>[    0.309214] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
>[    0.309575] PCI host bridge to bus 0000:00
>[    0.309668] pci_bus 0000:00: root bus resource [bus 00-3e]
>[    0.309764] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
>[    0.309859] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
>[    0.309956] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
>[    0.310052] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
>[    0.310151] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
>[    0.310249] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
>[    0.310346] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
>[    0.310443] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
>[    0.310540] pci_bus 0000:00: root bus resource [mem 0xdf200000-0xfeafffff]
>[    0.310642] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
>[    0.310694] pci 0000:00:02.0: [8086:0412] type 00 class 0x030000
>[    0.310701] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
>[    0.310705] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
>[    0.310708] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
>[    0.310753] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
>[    0.310758] pci 0000:00:03.0: reg 0x10: [mem 0xf7c34000-0xf7c37fff 64bit]
>[    0.310827] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
>[    0.310842] pci 0000:00:14.0: reg 0x10: [mem 0xf7c20000-0xf7c2ffff 64bit]
>[    0.310891] pci 0000:00:14.0: PME# supported from D3hot D3cold
>[    0.310913] pci 0000:00:14.0: System wakeup disabled by ACPI
>[    0.311033] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
>[    0.311049] pci 0000:00:16.0: reg 0x10: [mem 0xf7c40000-0xf7c4000f 64bit]
>[    0.311102] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
>[    0.311153] pci 0000:00:19.0: [8086:153a] type 00 class 0x020000
>[    0.311167] pci 0000:00:19.0: reg 0x10: [mem 0xf7c00000-0xf7c1ffff]
>[    0.311174] pci 0000:00:19.0: reg 0x14: [mem 0xf7c3d000-0xf7c3dfff]
>[    0.311181] pci 0000:00:19.0: reg 0x18: [io  0xf080-0xf09f]
>[    0.311231] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
>[    0.311252] pci 0000:00:19.0: System wakeup disabled by ACPI
>[    0.311374] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
>[    0.311391] pci 0000:00:1a.0: reg 0x10: [mem 0xf7c3c000-0xf7c3c3ff]
>[    0.311466] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
>[    0.311489] pci 0000:00:1a.0: System wakeup disabled by ACPI
>[    0.311610] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
>[    0.311623] pci 0000:00:1b.0: reg 0x10: [mem 0xf7c30000-0xf7c33fff 64bit]
>[    0.311680] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>[    0.311701] pci 0000:00:1b.0: System wakeup disabled by ACPI
>[    0.311819] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
>[    0.311874] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>[    0.311896] pci 0000:00:1c.0: System wakeup disabled by ACPI
>[    0.312015] pci 0000:00:1c.1: [8086:8c12] type 01 class 0x060400
>[    0.312070] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
>[    0.312092] pci 0000:00:1c.1: System wakeup disabled by ACPI
>[    0.312221] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
>[    0.312238] pci 0000:00:1d.0: reg 0x10: [mem 0xf7c3b000-0xf7c3b3ff]
>[    0.312312] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
>[    0.312336] pci 0000:00:1d.0: System wakeup disabled by ACPI
>[    0.312457] pci 0000:00:1f.0: [8086:8c4e] type 00 class 0x060100
>[    0.312585] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601
>[    0.312597] pci 0000:00:1f.2: reg 0x10: [io  0xf0d0-0xf0d7]
>[    0.312603] pci 0000:00:1f.2: reg 0x14: [io  0xf0c0-0xf0c3]
>[    0.312609] pci 0000:00:1f.2: reg 0x18: [io  0xf0b0-0xf0b7]
>[    0.312616] pci 0000:00:1f.2: reg 0x1c: [io  0xf0a0-0xf0a3]
>[    0.312622] pci 0000:00:1f.2: reg 0x20: [io  0xf060-0xf07f]
>[    0.312628] pci 0000:00:1f.2: reg 0x24: [mem 0xf7c3a000-0xf7c3a7ff]
>[    0.312658] pci 0000:00:1f.2: PME# supported from D3hot
>[    0.312698] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
>[    0.312710] pci 0000:00:1f.3: reg 0x10: [mem 0xf7c39000-0xf7c390ff 64bit]
>[    0.312727] pci 0000:00:1f.3: reg 0x20: [io  0xf040-0xf05f]
>[    0.312808] pci 0000:00:1c.0: PCI bridge to [bus 01]
>[    0.312903] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
>[    0.312906] pci 0000:00:1c.0:   bridge window [mem 0xdf200000-0xdf3fffff]
>[    0.312910] pci 0000:00:1c.0:   bridge window [mem 0xdf400000-0xdf5fffff 64bit pref]
>[    0.312969] pci 0000:02:00.0: [104c:8240] type 01 class 0x060400
>[    0.313095] pci 0000:02:00.0: supports D1 D2
>[    0.313117] pci 0000:02:00.0: System wakeup disabled by ACPI
>[    0.315227] pci 0000:00:1c.1: PCI bridge to [bus 02-03]
>[    0.315468] pci 0000:02:00.0: PCI bridge to [bus 03]
>[    0.316003] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15), disabled.
>[    0.316620] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 *11 12 14 15), disabled.
>[    0.317221] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15), disabled.
>[    0.317824] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15), disabled.
>[    0.318430] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 10 11 12 14 15), disabled.
>[    0.319033] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    0.319673] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15), disabled.
>[    0.320274] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15), disabled.
>[    0.320946] ACPI: Enabled 6 GPEs in block 00 to 3F
>[    0.321157] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
>[    0.321308] vgaarb: loaded
>[    0.321400] vgaarb: bridge control possible 0000:00:02.0
>[    0.321535] SCSI subsystem initialized
>[    0.321651] libata version 3.00 loaded.
>[    0.321673] ACPI: bus type USB registered
>[    0.321778] usbcore: registered new interface driver usbfs
>[    0.321877] usbcore: registered new interface driver hub
>[    0.321983] usbcore: registered new device driver usb
>[    0.322092] pps_core: LinuxPPS API ver. 1 registered
>[    0.322186] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
>[    0.322341] PTP clock support registered
>[    0.322473] PCI: Using ACPI for IRQ routing
>[    0.323731] PCI: pci_cache_line_size set to 64 bytes
>[    0.323768] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
>[    0.323769] e820: reserve RAM buffer [mem 0xd18f5000-0xd3ffffff]
>[    0.323770] e820: reserve RAM buffer [mem 0xd1d2d000-0xd3ffffff]
>[    0.323770] e820: reserve RAM buffer [mem 0xd7eeb000-0xd7ffffff]
>[    0.323771] e820: reserve RAM buffer [mem 0xd8761000-0xdbffffff]
>[    0.323772] e820: reserve RAM buffer [mem 0xd8fb1000-0xdbffffff]
>[    0.323773] e820: reserve RAM buffer [mem 0xda71c000-0xdbffffff]
>[    0.323774] e820: reserve RAM buffer [mem 0xdbe12000-0xdbffffff]
>[    0.323775] e820: reserve RAM buffer [mem 0x11ee00000-0x11fffffff]
>[    0.323844] NetLabel: Initializing
>[    0.323934] NetLabel:  domain hash size = 128
>[    0.324027] NetLabel:  protocols = UNLABELED CIPSOv4
>[    0.324128] NetLabel:  unlabeled traffic allowed by default
>[    0.324272] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
>[    0.324693] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
>[    0.326806] Switched to clocksource hpet
>[    0.328938] pnp: PnP ACPI init
>[    0.329040] ACPI: bus type PNP registered
>[    0.329166] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
>[    0.329268] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
>[    0.329354] system 00:01: [io  0x0680-0x069f] has been reserved
>[    0.329452] system 00:01: [io  0xffff] has been reserved
>[    0.329547] system 00:01: [io  0xffff] has been reserved
>[    0.329642] system 00:01: [io  0xffff] has been reserved
>[    0.329736] system 00:01: [io  0x1c00-0x1cfe] has been reserved
>[    0.329843] system 00:01: [io  0x1d00-0x1dfe] has been reserved
>[    0.329938] system 00:01: [io  0x1e00-0x1efe] has been reserved
>[    0.330033] system 00:01: [io  0x1f00-0x1ffe] has been reserved
>[    0.330130] system 00:01: [io  0x1800-0x18fe] could not be reserved
>[    0.330226] system 00:01: [io  0x164e-0x164f] has been reserved
>[    0.330322] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.330340] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
>[    0.330366] system 00:03: [io  0x1854-0x1857] has been reserved
>[    0.330474] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
>[    0.330525] system 00:04: [io  0x0a00-0x0a0f] has been reserved
>[    0.330626] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.330652] system 00:05: [io  0x04d0-0x04d1] has been reserved
>[    0.330753] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.331045] pnp 00:06: [dma 0 disabled]
>[    0.331075] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
>[    0.331295] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
>[    0.331404] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
>[    0.331501] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
>[    0.331598] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
>[    0.331695] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
>[    0.331792] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
>[    0.331899] system 00:07: [mem 0xfed90000-0xfed93fff] has been reserved
>[    0.331995] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
>[    0.332092] system 00:07: [mem 0xff000000-0xffffffff] has been reserved
>[    0.332189] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
>[    0.332287] system 00:07: [mem 0xf7fdf000-0xf7fdffff] has been reserved
>[    0.332385] system 00:07: [mem 0xf7fe0000-0xf7feffff] has been reserved
>[    0.332492] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.332601] pnp: PnP ACPI: found 8 devices
>[    0.332695] ACPI: bus type PNP unregistered
>[    0.338939] pci 0000:00:1c.0: PCI bridge to [bus 01]
>[    0.339035] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
>[    0.339133] pci 0000:00:1c.0:   bridge window [mem 0xdf200000-0xdf3fffff]
>[    0.339232] pci 0000:00:1c.0:   bridge window [mem 0xdf400000-0xdf5fffff 64bit pref]
>[    0.339383] pci 0000:02:00.0: PCI bridge to [bus 03]
>[    0.339492] pci 0000:00:1c.1: PCI bridge to [bus 02-03]
>[    0.339593] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
>[    0.339595] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
>[    0.339596] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
>[    0.339597] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
>[    0.339597] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
>[    0.339598] pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000dffff]
>[    0.339599] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000e3fff]
>[    0.339600] pci_bus 0000:00: resource 11 [mem 0x000e4000-0x000e7fff]
>[    0.339601] pci_bus 0000:00: resource 12 [mem 0xdf200000-0xfeafffff]
>[    0.339602] pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
>[    0.339603] pci_bus 0000:01: resource 1 [mem 0xdf200000-0xdf3fffff]
>[    0.339604] pci_bus 0000:01: resource 2 [mem 0xdf400000-0xdf5fffff 64bit pref]
>[    0.339619] NET: Registered protocol family 2
>[    0.339827] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
>[    0.340032] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
>[    0.340198] TCP: Hash tables configured (established 32768 bind 32768)
>[    0.340308] TCP: reno registered
>[    0.340402] UDP hash table entries: 2048 (order: 4, 65536 bytes)
>[    0.340510] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
>[    0.340641] NET: Registered protocol family 1
>[    0.340780] RPC: Registered named UNIX socket transport module.
>[    0.340890] RPC: Registered udp transport module.
>[    0.342428] RPC: Registered tcp transport module.
>[    0.342522] RPC: Registered tcp NFSv4.1 backchannel transport module.
>[    0.342623] pci 0000:00:02.0: Boot video device
>[    0.342886] PCI: CLS 64 bytes, default 64
>[    0.588965] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>[    0.589066] software IO TLB [mem 0xd3eeb000-0xd7eeb000] (64MB) mapped at [ffff8800d3eeb000-ffff8800d7eeafff]
>[    0.589504] RAPL PMU detected, hw unit 2^-14 Joules, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
>[    0.590161] futex hash table entries: 2048 (order: 5, 131072 bytes)
>[    0.590322] audit: initializing netlink subsys (disabled)
>[    0.590428] audit: type=2000 audit(1404115724.576:1): initialized
>[    0.590693] HugeTLB registered 2 MB page size, pre-allocated 0 pages
>[    0.591790] VFS: Disk quotas dquot_6.5.2
>[    0.591904] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>[    0.592415] NFS: Registering the id_resolver key type
>[    0.592517] Key type id_resolver registered
>[    0.592610] Key type id_legacy registered
>[    0.592704] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>[    0.592882] fuse init (API version 7.23)
>[    0.593043] msgmni has been set to 7678
>[    0.593299] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
>[    0.593458] io scheduler noop registered
>[    0.593551] io scheduler deadline registered
>[    0.593661] io scheduler cfq registered (default)
>[    0.593878] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
>[    0.593988] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
>[    0.594060] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
>[    0.594170] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
>[    0.594181] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
>[    0.594279] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
>[    0.594377] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
>[    0.594381] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>[    0.594703] Monitor-Mwait will be used to enter C-1 state
>[    0.594714] Monitor-Mwait will be used to enter C-2 state
>[    0.594721] ACPI: acpi_idle registered with cpuidle
>[    0.595752] ACPI: Invalid active0 threshold
>[    0.595897] thermal LNXTHERM:00: registered as thermal_zone0
>[    0.596018] ACPI: Thermal Zone [TZ00] (28 C)
>[    0.596232] thermal LNXTHERM:01: registered as thermal_zone1
>[    0.596336] ACPI: Thermal Zone [TZ01] (30 C)
>[    0.596463] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>[    0.617355] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
>[    0.617779] Non-volatile memory driver v1.3
>[    0.617879] Linux agpgart interface v0.103
>[    0.618785] brd: module loaded
>[    0.618971] Loading iSCSI transport class v2.0-870.
>[    0.619197] iscsi: registered transport (tcp)
>[    0.619410] Adaptec aacraid driver 1.2-0[30300]-ms
>[    0.619521] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
>[    0.619663] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.07.00.08-k.
>[    0.619840] iscsi: registered transport (qla4xxx)
>[    0.619966] QLogic iSCSI HBA Driver
>[    0.620080] DC390: clustering now enabled by default. If you get problems load
>[    0.620260]        with "disable_clustering=1" and report to maintainers
>[    0.620371] GDT-HA: Storage RAID Controller Driver. Version: 3.05
>[    0.620509] RocketRAID 3xxx/4xxx Controller driver v1.8
>[    0.620632] stex: Promise SuperTrak EX Driver version: 4.6.0000.4
>[    0.620756] st: Version 20101219, fixed bufsize 32768, s/g segs 256
>[    0.620873] osst :I: Tape driver with OnStream support version 0.99.4
>osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
>[    0.621095] SCSI Media Changer driver v0.25 
>[    0.621249] ahci 0000:00:1f.2: version 3.0
>[    0.621313] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
>[    0.621346] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode
>[    0.621497] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst 
>[    0.623323] scsi0 : ahci
>[    0.623490] scsi1 : ahci
>[    0.623651] scsi2 : ahci
>[    0.623808] scsi3 : ahci
>[    0.623979] scsi4 : ahci
>[    0.624137] scsi5 : ahci
>[    0.624259] ata1: SATA max UDMA/133 abar m2048@0xf7c3a000 port 0xf7c3a100 irq 42
>[    0.624418] ata2: DUMMY
>[    0.624509] ata3: SATA max UDMA/133 abar m2048@0xf7c3a000 port 0xf7c3a200 irq 42
>[    0.624659] ata4: DUMMY
>[    0.624757] ata5: DUMMY
>[    0.624847] ata6: DUMMY
>[    0.625470] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.20 (March 14, 2014)
>[    0.625766] bnx2x: Broadcom NetXtreme II 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.78.19-0 (2014/02/10)
>[    0.626066] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
>[    0.626172] e100: Copyright(c) 1999-2006 Intel Corporation
>[    0.626285] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
>[    0.626389] e1000: Copyright (c) 1999-2006 Intel Corporation.
>[    0.626495] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
>[    0.626596] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
>[    0.626767] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
>[    0.626945] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
>[    0.796789] e1000e 0000:00:19.0 eth0: registered PHC clock
>[    0.796898] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) f8:b1:56:b2:e5:95
>[    0.797062] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
>[    0.797202] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
>[    0.797312] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.5-k
>[    0.797415] igb: Copyright (c) 2007-2014 Intel Corporation.
>[    0.797539] usbcore: registered new interface driver catc
>[    0.797653] usbcore: registered new interface driver kaweth
>[    0.797757] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
>[    0.797910] usbcore: registered new interface driver pegasus
>[    0.798030] usbcore: registered new interface driver rtl8150
>[    0.798147] usbcore: registered new interface driver asix
>[    0.798262] usbcore: registered new interface driver ax88179_178a
>[    0.798375] usbcore: registered new interface driver cdc_ether
>[    0.798497] usbcore: registered new interface driver dm9601
>[    0.798608] usbcore: registered new interface driver gl620a
>[    0.798729] usbcore: registered new interface driver net1080
>[    0.798841] usbcore: registered new interface driver plusb
>[    0.798954] usbcore: registered new interface driver rndis_host
>[    0.799078] usbcore: registered new interface driver cdc_subset
>[    0.799191] usbcore: registered new interface driver zaurus
>[    0.799302] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
>[    0.799471] usbcore: registered new interface driver cdc_ncm
>[    0.799638] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>[    0.799748] ehci-pci: EHCI PCI platform driver
>[    0.799898] ehci-pci 0000:00:1a.0: EHCI Host Controller
>[    0.800042] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
>[    0.800213] ehci-pci 0000:00:1a.0: debug port 2
>[    0.804211] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
>[    0.804221] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7c3c000
>[    0.810056] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
>[    0.810172] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>[    0.810271] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    0.810423] usb usb1: Product: EHCI Host Controller
>[    0.810518] usb usb1: Manufacturer: Linux 3.16.0-rc2_drm-intel-nightly_1087d4_20140630+ ehci_hcd
>[    0.810671] usb usb1: SerialNumber: 0000:00:1a.0
>[    0.810872] hub 1-0:1.0: USB hub found
>[    0.810988] hub 1-0:1.0: 2 ports detected
>[    0.811218] ehci-pci 0000:00:1d.0: EHCI Host Controller
>[    0.811422] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
>[    0.811600] ehci-pci 0000:00:1d.0: debug port 2
>[    0.815597] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
>[    0.815606] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7c3b000
>[    0.821071] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
>[    0.821200] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
>[    0.821299] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    0.821449] usb usb2: Product: EHCI Host Controller
>[    0.821544] usb usb2: Manufacturer: Linux 3.16.0-rc2_drm-intel-nightly_1087d4_20140630+ ehci_hcd
>[    0.821696] usb usb2: SerialNumber: 0000:00:1d.0
>[    0.821943] hub 2-0:1.0: USB hub found
>[    0.822072] hub 2-0:1.0: 2 ports detected
>[    0.822265] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>[    0.822385] ohci-pci: OHCI PCI platform driver
>[    0.822495] uhci_hcd: USB Universal Host Controller Interface driver
>[    0.822702] xhci_hcd 0000:00:14.0: xHCI Host Controller
>[    0.822893] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
>[    0.823146] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
>[    0.823161] xhci_hcd 0000:00:14.0: irq 44 for MSI/MSI-X
>[    0.823201] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
>[    0.823297] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    0.823445] usb usb3: Product: xHCI Host Controller
>[    0.823538] usb usb3: Manufacturer: Linux 3.16.0-rc2_drm-intel-nightly_1087d4_20140630+ xhci_hcd
>[    0.823688] usb usb3: SerialNumber: 0000:00:14.0
>[    0.823852] hub 3-0:1.0: USB hub found
>[    0.824023] hub 3-0:1.0: 15 ports detected
>[    0.826319] xhci_hcd 0000:00:14.0: xHCI Host Controller
>[    0.826448] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
>[    0.826689] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
>[    0.826786] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    0.826933] usb usb4: Product: xHCI Host Controller
>[    0.827045] usb usb4: Manufacturer: Linux 3.16.0-rc2_drm-intel-nightly_1087d4_20140630+ xhci_hcd
>[    0.827207] usb usb4: SerialNumber: 0000:00:14.0
>[    0.827364] hub 4-0:1.0: USB hub found
>[    0.827504] hub 4-0:1.0: 6 ports detected
>[    0.828231] usbcore: registered new interface driver usb-storage
>[    0.828371] i8042: PNP: No PS/2 controller found. Probing ports directly.
>[    0.831392] serio: i8042 KBD port at 0x60,0x64 irq 1
>[    0.831486] serio: i8042 AUX port at 0x60,0x64 irq 12
>[    0.831670] mousedev: PS/2 mouse device common for all mice
>[    0.831858] rtc_cmos 00:02: RTC can wake from S4
>[    0.832106] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
>[    0.832241] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
>[    0.833846] i2c /dev entries driver
>[    0.833968] hidraw: raw HID events driver (C) Jiri Kosina
>[    0.834282] usbcore: registered new interface driver usbhid
>[    0.834446] usbhid: USB HID core driver
>[    0.834596] TCP: cubic registered
>[    0.834688] Initializing XFRM netlink socket
>[    0.834783] NET: Registered protocol family 17
>[    0.834890] Key type dns_resolver registered
>[    0.835309] registered taskstats version 1
>[    0.835644] Btrfs loaded
>[    0.835982]   Magic number: 2:167:120
>[    0.836185] PM: Hibernation image not present or could not be loaded.
>[    0.836195] Warning: unable to open an initial console.
>[    0.931124] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[    0.931239] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[    0.933022] ata1.00: ATA-9: ST1000DM003-1CH162, CC47, max UDMA/133
>[    0.933132] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
>[    0.934180] ata1.00: configured for UDMA/133
>[    0.934351] ata3.00: ATAPI: PLDS DVD+/-RW DH-16AES, 3D11, max UDMA/100
>[    0.934416] scsi 0:0:0:0: Direct-Access     ATA      ST1000DM003-1CH1 CC47 PQ: 0 ANSI: 5
>[    0.934643] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
>[    0.934644] sd 0:0:0:0: [sda] 4096-byte physical blocks
>[    0.934648] sd 0:0:0:0: Attached scsi generic sg0 type 0
>[    0.934737] sd 0:0:0:0: [sda] Write Protect is off
>[    0.934738] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[    0.934773] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    0.940574] ata3.00: configured for UDMA/100
>[    0.942597] scsi 2:0:0:0: CD-ROM            PLDS     DVD+-RW DH-16AES 3D11 PQ: 0 ANSI: 5
>[    0.954286]  sda: sda1 sda2 sda3
>[    0.954901] sd 0:0:0:0: [sda] Attached SCSI disk
>[    0.969769] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>[    0.969923] cdrom: Uniform CD-ROM driver Revision: 3.20
>[    0.970155] sr 2:0:0:0: Attached scsi CD-ROM sr0
>[    0.970216] sr 2:0:0:0: Attached scsi generic sg1 type 5
>[    0.973275] Freeing unused kernel memory: 23248K (ffffffff81c41000 - ffffffff832f5000)
>[    0.992054] dracut: dracut-018-35.git20120510.fc17
>[    1.006835] udevd[1328]: starting version 182
>[    1.014677] [drm] Initialized drm 1.1.0 20060810
>[    1.015207] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
>[    1.015481] ACPI: Power Button [PWRB]
>[    1.015663] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
>[    1.015942] ACPI: Power Button [PWRF]
>[    1.018048] [drm:i915_dump_device_info] i915 device info: gen=7, pciid=0x0412 rev=0x06 flags=need_gfx_hws,is_haswell,has_fbc,has_hotplug,has_llc,has_ddi,has_fpga_dbg,
>[    1.018061] [drm:intel_detect_pch] Found LynxPoint PCH
>[    1.018125] [drm] Memory usable by graphics device = 2048M
>[    1.018240] [drm:i915_gem_gtt_init] GMADR size = 256M
>[    1.018242] [drm:i915_gem_gtt_init] GTT stolen size = 32M
>[    1.018243] [drm:i915_gem_gtt_init] ppgtt mode: 1
>[    1.018244] [drm] Replacing VGA console driver
>[    1.019424] Console: switching to colour dummy device 80x25
>[    1.019833] [drm:intel_opregion_setup] graphic opregion physical addr: 0xda7f9018
>[    1.019838] [drm:intel_opregion_setup] Public ACPI methods supported
>[    1.019839] [drm:intel_opregion_setup] SWSCI supported
>[    1.025175] [drm:swsci_setup] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483
>[    1.025177] [drm:intel_opregion_setup] ASLE supported
>[    1.025260] i915 0000:00:02.0: irq 45 for MSI/MSI-X
>[    1.025266] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
>[    1.025269] [drm] Driver supports precise vblank timestamp query.
>[    1.025271] [drm:init_vbt_defaults] Set default to SSC at 120000 kHz
>[    1.025273] [drm:validate_vbt] Using VBT from OpRegion: $VBT HASWELL        d
>[    1.025274] [drm:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0
>[    1.025275] [drm:parse_general_definitions] crt_ddc_bus_pin: 2
>[    1.025277] [drm:parse_lfp_panel_data] DRRS supported mode is seamless
>[    1.025278] [drm:parse_lfp_panel_data] Found panel mode in BIOS VBT tables:
>[    1.025280] [drm:drm_mode_debug_printmodeline] Modeline 0:"640x480" 0 25180 640 648 744 784 480 482 484 509 0x8 0xa
>[    1.025281] [drm:parse_lfp_panel_data] VBT initial LVDS value 300
>[    1.025283] [drm:parse_lfp_backlight] VBT backlight PWM modulation frequency 200 Hz, active low, min brightness 10, level 255
>[    1.025284] [drm:parse_sdvo_panel_data] Found SDVO panel mode in BIOS VBT tables:
>[    1.025285] [drm:drm_mode_debug_printmodeline] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
>[    1.025286] [drm:parse_sdvo_device_mapping] No SDVO device info is found in VBT
>[    1.025287] [drm:parse_driver_features] DRRS State Enabled:1
>[    1.025289] [drm:parse_ddi_port] Port C VBT info: DP:1 HDMI:1 DVI:1 EDP:0 CRT:0
>[    1.025290] [drm:parse_ddi_port] VBT HDMI level shift for port C: 6
>[    1.025291] [drm:parse_ddi_port] Port D VBT info: DP:1 HDMI:1 DVI:1 EDP:0 CRT:0
>[    1.025292] [drm:parse_ddi_port] VBT HDMI level shift for port D: 6
>[    1.025301] [drm:intel_dsm_pci_probe] no _DSM method for intel device
>[    1.025305] [drm:i915_gem_init_stolen] found 33554432 bytes of stolen memory at dd200000
>[    1.025307] [drm:intel_display_power_get] enabling always-on
>[    1.025308] [drm:intel_display_power_get] enabling display
>[    1.025310] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
>[    1.025349] [drm:intel_print_wm_latency] Primary WM0 latency 20 (2.0 usec)
>[    1.025350] [drm:intel_print_wm_latency] Primary WM1 latency 4 (2.0 usec)
>[    1.025351] [drm:intel_print_wm_latency] Primary WM2 latency 36 (18.0 usec)
>[    1.025352] [drm:intel_print_wm_latency] Primary WM3 latency 90 (45.0 usec)
>[    1.025353] [drm:intel_print_wm_latency] Primary WM4 latency 160 (80.0 usec)
>[    1.025354] [drm:intel_print_wm_latency] Sprite WM0 latency 20 (2.0 usec)
>[    1.025354] [drm:intel_print_wm_latency] Sprite WM1 latency 4 (2.0 usec)
>[    1.025355] [drm:intel_print_wm_latency] Sprite WM2 latency 36 (18.0 usec)
>[    1.025356] [drm:intel_print_wm_latency] Sprite WM3 latency 90 (45.0 usec)
>[    1.025357] [drm:intel_print_wm_latency] Sprite WM4 latency 160 (80.0 usec)
>[    1.025358] [drm:intel_print_wm_latency] Cursor WM0 latency 20 (2.0 usec)
>[    1.025359] [drm:intel_print_wm_latency] Cursor WM1 latency 4 (2.0 usec)
>[    1.025359] [drm:intel_print_wm_latency] Cursor WM2 latency 36 (18.0 usec)
>[    1.025360] [drm:intel_print_wm_latency] Cursor WM3 latency 90 (45.0 usec)
>[    1.025361] [drm:intel_print_wm_latency] Cursor WM4 latency 160 (80.0 usec)
>[    1.025363] [drm:intel_modeset_init] 3 display pipes available.
>[    1.025370] [drm:intel_ddi_pll_init] CDCLK running at 540000KHz
>[    1.025707] [drm:intel_crt_reset] pch crt adpa set to 0x80f40010
>[    1.025712] [drm:intel_dp_init_connector] Adding DP connector on port C
>[    1.025732] [drm:intel_dp_aux_init] registering DPDDC-C bus for card0-DP-1
>[    1.025826] [drm:intel_dp_init_connector] Adding DP connector on port D
>[    1.025847] [drm:intel_dp_aux_init] registering DPDDC-D bus for card0-DP-2
>[    1.026119] [drm:intel_modeset_readout_hw_state] [CRTC:6] hw state readout: enabled
>[    1.026121] [drm:intel_modeset_readout_hw_state] [CRTC:10] hw state readout: disabled
>[    1.026123] [drm:intel_modeset_readout_hw_state] [CRTC:14] hw state readout: disabled
>[    1.026125] [drm:intel_ddi_get_crtc_pll] Pipe A connected to port E using clock 0x60000000
>[    1.026129] [drm:intel_modeset_readout_hw_state] [ENCODER:17:DAC-17] hw state readout: enabled, pipe A
>[    1.026132] [drm:intel_modeset_readout_hw_state] [ENCODER:18:TMDS-18] hw state readout: disabled, pipe A
>[    1.026133] [drm:intel_modeset_readout_hw_state] [ENCODER:23:TMDS-23] hw state readout: disabled, pipe A
>[    1.026135] [drm:intel_modeset_readout_hw_state] [CONNECTOR:16:VGA-1] hw state readout: enabled
>[    1.026138] [drm:intel_modeset_readout_hw_state] [CONNECTOR:19:DP-1] hw state readout: disabled
>[    1.026139] [drm:intel_modeset_readout_hw_state] [CONNECTOR:22:HDMI-A-1] hw state readout: disabled
>[    1.026140] [drm:intel_modeset_readout_hw_state] [CONNECTOR:24:DP-2] hw state readout: disabled
>[    1.026141] [drm:intel_modeset_readout_hw_state] [CONNECTOR:25:HDMI-A-2] hw state readout: disabled
>[    1.026143] [drm:intel_dump_pipe_config] [CRTC:6][setup_hw_state] config for pipe A
>[    1.026144] [drm:intel_dump_pipe_config] cpu_transcoder: A
>[    1.026145] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
>[    1.026146] [drm:intel_dump_pipe_config] fdi/pch: 1, lanes: 1, gmch_m: 2639615, gmch_n: 8388608, link_m: 54991, link_n: 524288, tu: 64
>[    1.026147] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.026148] [drm:intel_dump_pipe_config] requested mode:
>[    1.026150] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 720 0 0 0 400 0 0 0 0x0 0x0
>[    1.026150] [drm:intel_dump_pipe_config] adjusted mode:
>[    1.026152] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x6
>[    1.026153] [drm:intel_dump_crtc_timings] crtc timings: 28319 720 738 846 900 400 413 415 449, type: 0x0 flags: 0x6
>[    1.026154] [drm:intel_dump_pipe_config] port clock: 270000
>[    1.026155] [drm:intel_dump_pipe_config] pipe src size: 720x400
>[    1.026156] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    1.026157] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x02d00190, enabled
>[    1.026158] [drm:intel_dump_pipe_config] ips: 0
>[    1.026158] [drm:intel_dump_pipe_config] double wide: 0
>[    1.026160] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe B
>[    1.026161] [drm:i915_get_vblank_timestamp] crtc 1 is disabled
>[    1.026163] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe B
>[    1.026164] [drm:intel_dump_pipe_config] [CRTC:10][setup_hw_state] config for pipe B
>[    1.026165] [drm:intel_dump_pipe_config] cpu_transcoder: B
>[    1.026166] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
>[    1.026167] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.026168] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.026168] [drm:intel_dump_pipe_config] requested mode:
>[    1.026170] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    1.026170] [drm:intel_dump_pipe_config] adjusted mode:
>[    1.026172] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    1.026173] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[    1.026174] [drm:intel_dump_pipe_config] port clock: 0
>[    1.026174] [drm:intel_dump_pipe_config] pipe src size: 0x0
>[    1.026175] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    1.026176] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    1.026177] [drm:intel_dump_pipe_config] ips: 0
>[    1.026178] [drm:intel_dump_pipe_config] double wide: 0
>[    1.026179] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe C
>[    1.026180] [drm:i915_get_vblank_timestamp] crtc 2 is disabled
>[    1.026182] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe C
>[    1.026183] [drm:intel_dump_pipe_config] [CRTC:14][setup_hw_state] config for pipe C
>[    1.026183] [drm:intel_dump_pipe_config] cpu_transcoder: C
>[    1.026184] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
>[    1.026185] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.026186] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.026187] [drm:intel_dump_pipe_config] requested mode:
>[    1.026188] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    1.026189] [drm:intel_dump_pipe_config] adjusted mode:
>[    1.026190] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    1.026191] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[    1.026192] [drm:intel_dump_pipe_config] port clock: 0
>[    1.026193] [drm:intel_dump_pipe_config] pipe src size: 0x0
>[    1.026193] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    1.026194] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    1.026195] [drm:intel_dump_pipe_config] ips: 0
>[    1.026196] [drm:intel_dump_pipe_config] double wide: 0
>[    1.026199] [drm:intel_connector_check_state] [CONNECTOR:16:VGA-1]
>[    1.026201] [drm:check_encoder_state] [ENCODER:17:DAC-17]
>[    1.026202] [drm:check_encoder_state] [ENCODER:18:TMDS-18]
>[    1.026203] [drm:check_encoder_state] [ENCODER:23:TMDS-23]
>[    1.026204] [drm:check_crtc_state] [CRTC:6]
>[    1.026212] [drm:check_crtc_state] [CRTC:10]
>[    1.026213] [drm:check_crtc_state] [CRTC:14]
>[    1.026217] [drm:ironlake_get_plane_config] pipe/plane 0/0 with fb: size=720x400@32, offset=0, pitch 4096, size 0x190000
>[    1.026218] [drm:i915_gem_object_create_stolen_for_preallocated] creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=190000
>[    1.026221] [drm:i915_pages_create_for_stolen] offset=0x0, size=1638400
>[    1.026223] [drm:intel_alloc_plane_obj] plane fb obj ffff88011441c000
>[    1.026224] [drm:i915_gem_setup_global_gtt] reserving preallocated space: 0 + 190000
>[    1.026225] [drm:i915_gem_setup_global_gtt] clearing unused GTT space: [190000, 7ffff000]
>[    1.027323] [drm:gen6_ppgtt_init] Allocated pde space (2M) at GTT entry: 7fdf0
>[    1.027325] [drm:i915_gem_context_init] HW context support initialized
>[    1.027330] [drm:init_status_page] render ring hws offset: 0x7fff0000
>[    1.029173] [drm:init_pipe_control] render ring pipe control offset: 0x001c1000
>[    1.029180] [drm:init_status_page] bsd ring hws offset: 0x001c2000
>[    1.029221] [drm:init_status_page] blitter ring hws offset: 0x001e3000
>[    1.029255] [drm:init_status_page] video enhancement ring hws offset: 0x00204000
>[    1.029416] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:16:VGA-1]
>[    1.029417] [drm:intel_crt_detect] [CONNECTOR:16:VGA-1] force=1
>[    1.029419] [drm:intel_ironlake_crt_detect_hotplug] trigger hotplug detect cycle: adpa=0x83f40010
>[    1.039166] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0x83f40010, result 1
>[    1.039169] [drm:intel_crt_detect] CRT detected via hotplug
>[    1.039375] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
>[    1.039378] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[    1.039380] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[    1.039381] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
>[    1.039750] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[    1.039751] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
>[    1.039757] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:16:VGA-1] probed modes :
>[    1.039759] [drm:drm_mode_debug_printmodeline] Modeline 31:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[    1.039761] [drm:drm_mode_debug_printmodeline] Modeline 29:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[    1.039762] [drm:drm_mode_debug_printmodeline] Modeline 28:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
>[    1.039763] [drm:drm_mode_debug_printmodeline] Modeline 30:"848x480" 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
>[    1.039765] [drm:drm_mode_debug_printmodeline] Modeline 27:"640x480" 60 25175 640 656 752 800 480 489 492 525 0x40 0xa
>[    1.039766] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:DP-1]
>[    1.039768] [drm:intel_dp_detect] [CONNECTOR:19:DP-1]
>[    1.039770] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:DP-1] disconnected
>[    1.039772] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:22:HDMI-A-1]
>[    1.039773] [drm:intel_hdmi_detect] [CONNECTOR:22:HDMI-A-1]
>[    1.039927] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[    1.039928] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[    1.039929] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:22:HDMI-A-1] disconnected
>[    1.039930] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:24:DP-2]
>[    1.039931] [drm:intel_dp_detect] [CONNECTOR:24:DP-2]
>[    1.039933] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:24:DP-2] disconnected
>[    1.039934] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:25:HDMI-A-2]
>[    1.039935] [drm:intel_hdmi_detect] [CONNECTOR:25:HDMI-A-2]
>[    1.040093] [drm:gmbus_xfer] GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1)
>[    1.040094] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
>[    1.040095] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:25:HDMI-A-2] disconnected
>[    1.040096] [drm:drm_setup_crtcs] 
>[    1.040098] [drm:drm_enable_connectors] connector 16 enabled? yes
>[    1.040099] [drm:drm_enable_connectors] connector 19 enabled? no
>[    1.040099] [drm:drm_enable_connectors] connector 22 enabled? no
>[    1.040100] [drm:drm_enable_connectors] connector 24 enabled? no
>[    1.040101] [drm:drm_enable_connectors] connector 25 enabled? no
>[    1.040103] [drm:intel_fb_initial_config] looking for cmdline mode on connector VGA-1
>[    1.040111] [drm:intel_fb_initial_config] looking for preferred mode on connector VGA-1
>[    1.040112] [drm:intel_fb_initial_config] using first mode listed on connector VGA-1
>[    1.040113] [drm:intel_fb_initial_config] connector VGA-1 on pipe A [CRTC:6]: 1024x768
>[    1.040115] [drm:intel_fb_initial_config] connector DP-1 not enabled, skipping
>[    1.040116] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping
>[    1.040117] [drm:intel_fb_initial_config] connector DP-2 not enabled, skipping
>[    1.040118] [drm:intel_fb_initial_config] connector HDMI-A-2 not enabled, skipping
>[    1.040119] [drm:drm_setup_crtcs] desired mode 1024x768 set on crtc 6
>[    1.040120] [drm:intelfb_create] no BIOS fb, allocating a new one
>[    1.040122] [drm:i915_gem_object_create_stolen] creating stolen object: size=300000
>[    1.040128] [drm:i915_pages_create_for_stolen] offset=0x190000, size=3145728
>[    1.040443] [drm:intelfb_create] allocated 1024x768 fb: 0x00226000, bo ffff8800db348000
>[    1.040580] fbcon: inteldrmfb (fb0) is primary device
>[    1.040604] [drm:intel_crtc_set_config] [CRTC:6] [FB:33] #connectors=1 (x y) (0 0)
>[    1.040605] [drm:intel_set_config_compute_mode_changes] modes are different, full mode set
>[    1.040606] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    1.040607] [drm:drm_mode_debug_printmodeline] Modeline 32:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[    1.040608] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:6], mode_changed=1, fb_changed=1
>[    1.040609] [drm:intel_modeset_stage_output_state] [CONNECTOR:16:VGA-1] to [CRTC:6]
>[    1.040610] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
>[    1.040611] [drm:connected_sink_compute_bpp] [CONNECTOR:16:VGA-1] checking for sink bpp constrains
>[    1.040613] [drm:ironlake_check_fdi_lanes] checking fdi config on pipe A, lanes 1
>[    1.040614] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0
>[    1.040614] [drm:intel_dump_pipe_config] [CRTC:6][modeset] config for pipe A
>[    1.040615] [drm:intel_dump_pipe_config] cpu_transcoder: A
>[    1.040615] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
>[    1.040616] [drm:intel_dump_pipe_config] fdi/pch: 1, lanes: 1, gmch_m: 3029219, gmch_n: 4194304, link_m: 126217, link_n: 524288, tu: 64
>[    1.040617] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.040618] [drm:intel_dump_pipe_config] requested mode:
>[    1.040619] [drm:drm_mode_debug_printmodeline] Modeline 0:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[    1.040619] [drm:intel_dump_pipe_config] adjusted mode:
>[    1.040620] [drm:drm_mode_debug_printmodeline] Modeline 0:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[    1.040621] [drm:intel_dump_crtc_timings] crtc timings: 65000 1024 1048 1184 1344 768 771 777 806, type: 0x40 flags: 0xa
>[    1.040622] [drm:intel_dump_pipe_config] port clock: 270000
>[    1.040622] [drm:intel_dump_pipe_config] pipe src size: 1024x768
>[    1.040623] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    1.040624] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    1.040624] [drm:intel_dump_pipe_config] ips: 0
>[    1.040624] [drm:intel_dump_pipe_config] double wide: 0
>[    1.056207] [drm:intel_update_fbc] no output, disabling
>[    1.056215] [drm:intel_ddi_put_crtc_pll] Disabling SPLL
>[    1.056216] [drm:intel_ddi_pll_select] Using SPLL on pipe A
>[    1.056248] [drm:ironlake_update_primary_plane] Writing base 00226000 00000000 0 0 4096
>[    1.057123] [drm:hsw_fdi_link_train] FDI link training done on step 0
>[    1.057223] [drm:lpt_program_iclkip] iCLKIP clock: found settings for 65000KHz refresh rate: auxdiv=0, divsel=27, phasedir=0, phaseinc=22
>[    1.057286] [drm:intel_update_fbc] disabled per chip default
>[    1.057289] [drm:intel_connector_check_state] [CONNECTOR:16:VGA-1]
>[    1.057291] [drm:check_encoder_state] [ENCODER:17:DAC-17]
>[    1.057292] [drm:check_encoder_state] [ENCODER:18:TMDS-18]
>[    1.057293] [drm:check_encoder_state] [ENCODER:23:TMDS-23]
>[    1.057293] [drm:check_crtc_state] [CRTC:6]
>[    1.057302] [drm:check_crtc_state] [CRTC:10]
>[    1.057302] [drm:check_crtc_state] [CRTC:14]
>[    1.057305] [drm:intel_crtc_set_config] [CRTC:10] [NOFB]
>[    1.057307] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:10], mode_changed=0, fb_changed=0
>[    1.057308] [drm:intel_modeset_stage_output_state] [CONNECTOR:16:VGA-1] to [CRTC:6]
>[    1.057308] [drm:intel_crtc_set_config] [CRTC:14] [NOFB]
>[    1.057309] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:14], mode_changed=0, fb_changed=0
>[    1.057310] [drm:intel_modeset_stage_output_state] [CONNECTOR:16:VGA-1] to [CRTC:6]
>[    1.057314] Console: switching to colour frame buffer device 128x48
>[    1.057319] [drm:intel_crtc_set_config] [CRTC:6] [FB:33] #connectors=1 (x y) (0 0)
>[    1.057320] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:6], mode_changed=0, fb_changed=0
>[    1.057321] [drm:intel_modeset_stage_output_state] [CONNECTOR:16:VGA-1] to [CRTC:6]
>[    1.058727] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
>[    1.058745] i915 0000:00:02.0: registered panic notifier
>[    1.067101] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
>[    1.067309] [drm:asle_set_backlight] bclp = 0x80000002
>[    1.067311] [drm:asle_set_backlight] updating opregion backlight 2/255
>[    1.067344] [drm:asle_set_backlight] bclp = 0x800000ff
>[    1.067345] [drm:asle_set_backlight] updating opregion backlight 255/255
>[    1.067410] acpi device:5e: registered as cooling_device8
>[    1.067503] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
>[    1.067637] [drm] Initialized i915 1.6.0 20140606 for 0000:00:02.0 on minor 0
>[    1.070049] dracut: Starting plymouth daemon
>[    1.074338] [drm:intel_crtc_set_config] [CRTC:6] [FB:33] #connectors=1 (x y) (0 0)
>[    1.074340] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:6], mode_changed=0, fb_changed=0
>[    1.074341] [drm:intel_modeset_stage_output_state] [CONNECTOR:16:VGA-1] to [CRTC:6]
>[    1.077486] [drm:i915_gem_open] 
>[    1.077503] [drm:intel_crtc_set_config] [CRTC:6] [FB:33] #connectors=1 (x y) (0 0)
>[    1.077505] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:6], mode_changed=0, fb_changed=0
>[    1.077506] [drm:intel_modeset_stage_output_state] [CONNECTOR:16:VGA-1] to [CRTC:6]
>[    1.077508] [drm:intel_crtc_set_config] [CRTC:10] [NOFB]
>[    1.077509] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:10], mode_changed=0, fb_changed=0
>[    1.077510] [drm:intel_modeset_stage_output_state] [CONNECTOR:16:VGA-1] to [CRTC:6]
>[    1.077511] [drm:intel_crtc_set_config] [CRTC:14] [NOFB]
>[    1.077512] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:14], mode_changed=0, fb_changed=0
>[    1.077513] [drm:intel_modeset_stage_output_state] [CONNECTOR:16:VGA-1] to [CRTC:6]
>[    1.077518] [drm:i915_gem_open] 
>[    1.077524] [drm:intel_crtc_set_config] [CRTC:6] [FB:33] #connectors=1 (x y) (0 0)
>[    1.077525] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:6], mode_changed=0, fb_changed=0
>[    1.077526] [drm:intel_modeset_stage_output_state] [CONNECTOR:16:VGA-1] to [CRTC:6]
>[    1.077527] [drm:intel_crtc_set_config] [CRTC:10] [NOFB]
>[    1.077528] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:10], mode_changed=0, fb_changed=0
>[    1.077529] [drm:intel_modeset_stage_output_state] [CONNECTOR:16:VGA-1] to [CRTC:6]
>[    1.077530] [drm:intel_crtc_set_config] [CRTC:14] [NOFB]
>[    1.077531] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:14], mode_changed=0, fb_changed=0
>[    1.077531] [drm:intel_modeset_stage_output_state] [CONNECTOR:16:VGA-1] to [CRTC:6]
>[    1.077535] [drm:i915_gem_open] 
>[    1.077563] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[5] ENCODERS[3]
>[    1.077565] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[5] ENCODERS[3]
>[    1.077569] [drm:drm_mode_getconnector] [CONNECTOR:16:?]
>[    1.077570] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:16:VGA-1]
>[    1.077571] [drm:intel_crt_detect] [CONNECTOR:16:VGA-1] force=1
>[    1.077575] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0x83f40000, result 1
>[    1.077575] [drm:intel_crt_detect] CRT detected via hotplug
>[    1.077741] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
>[    1.077744] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[    1.077745] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[    1.077746] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
>[    1.078115] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[    1.078116] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
>[    1.078129] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:16:VGA-1] probed modes :
>[    1.078131] [drm:drm_mode_debug_printmodeline] Modeline 31:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[    1.078132] [drm:drm_mode_debug_printmodeline] Modeline 29:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[    1.078134] [drm:drm_mode_debug_printmodeline] Modeline 28:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
>[    1.078135] [drm:drm_mode_debug_printmodeline] Modeline 30:"848x480" 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
>[    1.078137] [drm:drm_mode_debug_printmodeline] Modeline 27:"640x480" 60 25175 640 656 752 800 480 489 492 525 0x40 0xa
>[    1.078139] [drm:drm_mode_getconnector] [CONNECTOR:16:?]
>[    1.079342] [drm:drm_mode_getconnector] [CONNECTOR:19:?]
>[    1.079343] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:DP-1]
>[    1.079344] [drm:intel_dp_detect] [CONNECTOR:19:DP-1]
>[    1.079347] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:DP-1] disconnected
>[    1.079348] [drm:drm_mode_getconnector] [CONNECTOR:19:?]
>[    1.079349] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:DP-1]
>[    1.079359] [drm:intel_dp_detect] [CONNECTOR:19:DP-1]
>[    1.079360] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:DP-1] disconnected
>[    1.079362] [drm:drm_mode_getconnector] [CONNECTOR:22:?]
>[    1.079363] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:22:HDMI-A-1]
>[    1.079364] [drm:intel_hdmi_detect] [CONNECTOR:22:HDMI-A-1]
>[    1.079518] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[    1.079518] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[    1.079519] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:22:HDMI-A-1] disconnected
>[    1.079520] [drm:drm_mode_getconnector] [CONNECTOR:22:?]
>[    1.079521] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:22:HDMI-A-1]
>[    1.079522] [drm:intel_hdmi_detect] [CONNECTOR:22:HDMI-A-1]
>[    1.079678] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[    1.079679] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[    1.079680] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:22:HDMI-A-1] disconnected
>[    1.079681] [drm:drm_mode_getconnector] [CONNECTOR:24:?]
>[    1.079682] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:24:DP-2]
>[    1.079683] [drm:intel_dp_detect] [CONNECTOR:24:DP-2]
>[    1.079685] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:24:DP-2] disconnected
>[    1.079686] [drm:drm_mode_getconnector] [CONNECTOR:24:?]
>[    1.079687] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:24:DP-2]
>[    1.079687] [drm:intel_dp_detect] [CONNECTOR:24:DP-2]
>[    1.079689] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:24:DP-2] disconnected
>[    1.079690] [drm:drm_mode_getconnector] [CONNECTOR:25:?]
>[    1.079691] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:25:HDMI-A-2]
>[    1.079692] [drm:intel_hdmi_detect] [CONNECTOR:25:HDMI-A-2]
>[    1.079851] [drm:gmbus_xfer] GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1)
>[    1.079851] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
>[    1.079852] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:25:HDMI-A-2] disconnected
>[    1.079853] [drm:drm_mode_getconnector] [CONNECTOR:25:?]
>[    1.079854] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:25:HDMI-A-2]
>[    1.079854] [drm:intel_hdmi_detect] [CONNECTOR:25:HDMI-A-2]
>[    1.080011] [drm:gmbus_xfer] GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1)
>[    1.080012] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
>[    1.080013] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:25:HDMI-A-2] disconnected
>[    1.113178] usb 1-1: new high-speed USB device number 2 using ehci-pci
>[    1.116394] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>[    1.117774] snd_hda_intel 0000:00:03.0: irq 46 for MSI/MSI-X
>[    1.117927] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
>[    1.118254] input: PC Speaker as /devices/platform/pcspkr/input/input6
>[    1.118291] ACPI Warning: SystemIO range 0x000000000000f040-0x000000000000f05f conflicts with OpRegion 0x000000000000f040-0x000000000000f04f (\_SB_.PCI0.SBUS.SMBI) (20140424/utaddress-258)
>[    1.118369] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[    1.121073] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
>[    1.125351] iTCO_vendor_support: vendor-support=0
>[    1.125452] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
>[    1.125507] iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860)
>[    1.125634] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>[    1.127260] sound hdaudioC1D0: autoconfig: line_outs=1 (0x1b/0x0/0x0/0x0/0x0) type:line
>[    1.127261] sound hdaudioC1D0:    speaker_outs=1 (0x14/0x0/0x0/0x0/0x0)
>[    1.127262] sound hdaudioC1D0:    hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
>[    1.127262] sound hdaudioC1D0:    mono: mono_out=0x0
>[    1.127263] sound hdaudioC1D0:    inputs:
>[    1.127264] sound hdaudioC1D0:      Front Mic=0x1a
>[    1.127264] sound hdaudioC1D0:      Rear Mic=0x18
>[    1.227533] usb 1-1: New USB device found, idVendor=8087, idProduct=8008
>[    1.228180] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    1.229065] hub 1-1:1.0: USB hub found
>[    1.229782] hub 1-1:1.0: 6 ports detected
>[    1.333266] usb 2-1: new high-speed USB device number 2 using ehci-pci
>[    1.375657] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
>[    1.443636] dracut: Checking ext4: /dev/sda3
>[    1.444365] dracut: issuing e2fsck -a  /dev/sda3
>[    1.447622] usb 2-1: New USB device found, idVendor=8087, idProduct=8000
>[    1.448252] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    1.449019] hub 2-1:1.0: USB hub found
>[    1.449746] hub 2-1:1.0: 8 ports detected
>[    1.552438] dracut: /dev/sda3: clean, 768361/60538880 files, 17800516/242140160 blocks
>[    1.553303] dracut: Remounting /dev/sda3 with -o ro
>[    1.592363] tsc: Refined TSC clocksource calibration: 3392.144 MHz
>[    1.602948] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
>[    1.647122] dracut: Mounted root filesystem /dev/sda3
>[    1.649630] random: nonblocking pool is initialized
>[    1.701212] device-mapper: uevent: version 1.0.3
>[    1.701977] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
>[    1.725494] usb 2-1.5: new low-speed USB device number 3 using ehci-pci
>[    1.753252] dracut: Switching root
>[    1.800542] usb 2-1.5: device descriptor read/64, error -32
>[    1.975614] usb 2-1.5: device descriptor read/64, error -32
>[    2.149674] usb 2-1.5: new low-speed USB device number 4 using ehci-pci
>[    2.165620] systemd[1]: systemd 204 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
>[    2.224705] usb 2-1.5: device descriptor read/64, error -32
>[    2.245946] systemd[1]: Failed to insert module 'ipv6'
>[    2.259275] systemd[1]: Set hostname to <x-hsw24>.
>[    2.399964] usb 2-1.5: device descriptor read/64, error -32
>[    2.430031] LVM: Logical Volume autoactivation enabled.
>[    2.430622] LVM: Activation generator successfully completed.
>[    2.573853] usb 2-1.5: new low-speed USB device number 5 using ehci-pci
>[    2.592883] Switched to clocksource tsc
>[    2.643395] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
>[    2.644016] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
>[    2.644583] systemd[1]: Starting Syslog Socket.
>[    2.645101] systemd[1]: Listening on Syslog Socket.
>[    2.645595] systemd[1]: Starting Replay Read-Ahead Data...
>[    2.646364] systemd[1]: Starting Collect Read-Ahead Data...
>[    2.647471] systemd[1]: Starting Delayed Shutdown Socket.
>[    2.648413] systemd[1]: Listening on Delayed Shutdown Socket.
>[    2.648422] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
>[    2.650029] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
>[    2.650054] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
>[    2.651144] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
>[    2.651152] systemd[1]: Starting Encrypted Volumes.
>[    2.652257] systemd[1]: Reached target Encrypted Volumes.
>[    2.652267] systemd[1]: Starting Journal Socket.
>[    2.653873] systemd[1]: Listening on Journal Socket.
>[    2.653891] systemd[1]: Mounting Huge Pages File System...
>[    2.655653] systemd[1]: Mounting Debug File System...
>[    2.656768] systemd[1]: Starting Create static device nodes in /dev...
>[    2.657860] systemd[1]: Mounting POSIX Message Queue File System...
>[    2.658928] systemd[1]: Starting Journal Service...
>[    2.660082] systemd-readahead[2514]: Failed to create fanotify object: Function not implemented
>[    2.660129] systemd-readahead[2513]: Bumped block_nr parameter of 8:0 to 20480. This is a temporary hack and should be removed one day.
>[    2.662284] systemd[1]: Started Journal Service.
>[    2.662462] systemd[1]: Starting udev Kernel Socket.
>[    2.663992] systemd[1]: Listening on udev Kernel Socket.
>[    2.664025] systemd[1]: Starting udev Control Socket.
>[    2.665146] systemd[1]: Listening on udev Control Socket.
>[    2.665180] systemd[1]: Starting udev Coldplug all Devices...
>[    2.667005] systemd[1]: Starting LVM2 metadata daemon socket.
>[    2.667982] systemd[1]: Listening on LVM2 metadata daemon socket.
>[    2.667988] systemd[1]: Starting Device-mapper event daemon FIFOs.
>[    2.669686] systemd[1]: Listening on Device-mapper event daemon FIFOs.
>[    2.669696] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
>[    2.671016] systemd[1]: Expecting device dev-disk-by\x2duuid-50f1dcef\x2de289\x2d40be\x2dbc3c\x2d97766928b454.device...
>[    2.672029] systemd[1]: Mounting Temporary Directory...
>[    2.708941] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
>[    2.712839] [drm:gen6_enable_rps] Overclocking supported. Max: 1200MHz, Overclock max: 1200MHz
>[    2.837313] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway.
>[    2.838169] systemd[1]: Expecting device dev-disk-by\x2duuid-8ebfad99\x2d4959\x2d4128\x2d9909\x2dde33bcd5dee3.device...
>[    2.839524] systemd[1]: Started Replay Read-Ahead Data.
>[    2.839645] systemd[1]: systemd-readahead-collect.service: main process exited, code=exited, status=1/FAILURE
>[    2.840784] systemd[1]: Started Collect Read-Ahead Data.
>[    2.840925] systemd[1]: Starting Load legacy module configuration...
>[    2.842884] systemd[1]: Starting Setup Virtual Console...
>[    2.844648] systemd[1]: Starting Apply Kernel Variables...
>[    2.845869] systemd[1]: Started Set Up Additional Binary Formats.
>[    2.845897] systemd[1]: Started File System Check on Root Device.
>[    2.845909] systemd[1]: Starting Remount Root and Kernel File Systems...
>[    2.849419] systemd[1]: Started Load Kernel Modules.
>[    2.850118] systemd[1]: Mounting FUSE Control File System...
>[    2.851049] systemd[1]: Mounted Configuration File System.
>[    2.976927] usb 2-1.5: device not accepting address 5, error -32
>[    3.050043] usb 2-1.5: new low-speed USB device number 6 using ehci-pci
>[    3.183230] EXT4-fs (sda3): re-mounted. Opts: (null)
>[    3.453130] usb 2-1.5: device not accepting address 6, error -32
>[    3.453839] usb 2-1-port5: unable to enumerate USB device
>[    3.504950] systemd-udevd[3419]: starting version 204
>[    3.884377] systemd-udevd[3453]: renamed network interface em1 to eno1
>[    5.463506] Adding 4095996k swap on /dev/sda2.  Priority:-1 extents:1 across:4095996k 
>[    6.119034] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
>[    6.339940] audit: type=1305 audit(1404115730.323:2): audit_pid=3485 old=0 auid=4294967295 ses=4294967295 res=1
>[    6.366597] alsactl[3500]: segfault at 0 ip 0000003820a4888d sp 00007fff633109d0 error 4 in libc-2.17.so[3820a00000+1b5000]
>[    9.575992] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
>[    9.676811] e1000e 0000:00:19.0: irq 49 for MSI/MSI-X
>[   12.656610] e1000e: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
>[   14.093878] [drm:intel_crtc_set_config] [CRTC:6] [FB:33] #connectors=1 (x y) (0 0)
>[   14.093881] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:6], mode_changed=0, fb_changed=0
>[   14.093883] [drm:intel_modeset_stage_output_state] [CONNECTOR:16:VGA-1] to [CRTC:6]
>[   14.093885] [drm:intel_crtc_set_config] [CRTC:10] [NOFB]
>[   14.093886] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:10], mode_changed=0, fb_changed=0
>[   14.093887] [drm:intel_modeset_stage_output_state] [CONNECTOR:16:VGA-1] to [CRTC:6]
>[   14.093888] [drm:intel_crtc_set_config] [CRTC:14] [NOFB]
>[   14.093889] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:14], mode_changed=0, fb_changed=0
>[   14.093890] [drm:intel_modeset_stage_output_state] [CONNECTOR:16:VGA-1] to [CRTC:6]
>[   14.433212] systemd[1]: PID file /run/sendmail.pid not readable (yet?) after start.
>[   14.580555] NET: Registered protocol family 10
>[   14.618104] Bridge firewalling registered
>[   14.770552] ip_tables: (C) 2000-2006 Netfilter Core Team
>[   15.009496] [drm:intel_crtc_set_config] [CRTC:6] [FB:33] #connectors=1 (x y) (0 0)
>[   15.009498] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:6], mode_changed=0, fb_changed=0
>[   15.009499] [drm:intel_modeset_stage_output_state] [CONNECTOR:16:VGA-1] to [CRTC:6]
>[   17.321440] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>[   17.479112] Ebtables v2.0 registered
>[   17.502428] ip6_tables: (C) 2000-2006 Netfilter Core Team
>[   84.019612] [drm:i915_gem_open] 
>[   84.019637] [drm:intel_crtc_set_config] [CRTC:6] [FB:33] #connectors=1 (x y) (0 0)
>[   84.019639] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:6], mode_changed=0, fb_changed=0
>[   84.019641] [drm:intel_modeset_stage_output_state] [CONNECTOR:16:VGA-1] to [CRTC:6]
>[   84.019643] [drm:intel_crtc_set_config] [CRTC:10] [NOFB]
>[   84.019644] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:10], mode_changed=0, fb_changed=0
>[   84.019645] [drm:intel_modeset_stage_output_state] [CONNECTOR:16:VGA-1] to [CRTC:6]
>[   84.019646] [drm:intel_crtc_set_config] [CRTC:14] [NOFB]
>[   84.019647] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:14], mode_changed=0, fb_changed=0
>[   84.019648] [drm:intel_modeset_stage_output_state] [CONNECTOR:16:VGA-1] to [CRTC:6]
>[   84.019655] [drm:i915_gem_open] 
>[   84.019903] [drm:i915_gem_open] 
>[   84.019917] [drm:i915_gem_open] 
>[   84.019959] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[5] ENCODERS[3]
>[   84.019968] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[5] ENCODERS[3]
>[   84.019975] [drm:drm_mode_getconnector] [CONNECTOR:16:?]
>[   84.019978] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:16:VGA-1]
>[   84.019980] [drm:intel_crt_detect] [CONNECTOR:16:VGA-1] force=1
>[   84.019984] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0x83f40000, result 1
>[   84.019985] [drm:intel_crt_detect] CRT detected via hotplug
>[   84.020151] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
>[   84.020153] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[   84.020155] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[   84.020156] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
>[   84.020515] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[   84.020516] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
>[   84.020522] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:16:VGA-1] probed modes :
>[   84.020524] [drm:drm_mode_debug_printmodeline] Modeline 31:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[   84.020525] [drm:drm_mode_debug_printmodeline] Modeline 29:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[   84.020527] [drm:drm_mode_debug_printmodeline] Modeline 28:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
>[   84.020528] [drm:drm_mode_debug_printmodeline] Modeline 30:"848x480" 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
>[   84.020530] [drm:drm_mode_debug_printmodeline] Modeline 27:"640x480" 60 25175 640 656 752 800 480 489 492 525 0x40 0xa
>[   84.020533] [drm:drm_mode_getconnector] [CONNECTOR:16:?]
>[   84.020550] [drm:drm_mode_getconnector] [CONNECTOR:19:?]
>[   84.020551] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:DP-1]
>[   84.020553] [drm:intel_dp_detect] [CONNECTOR:19:DP-1]
>[   84.020555] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:DP-1] disconnected
>[   84.020557] [drm:drm_mode_getconnector] [CONNECTOR:19:?]
>[   84.020557] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:DP-1]
>[   84.020558] [drm:intel_dp_detect] [CONNECTOR:19:DP-1]
>[   84.020560] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:DP-1] disconnected
>[   84.020570] [drm:drm_mode_getconnector] [CONNECTOR:22:?]
>[   84.020571] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:22:HDMI-A-1]
>[   84.020572] [drm:intel_hdmi_detect] [CONNECTOR:22:HDMI-A-1]
>[   84.020727] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[   84.020728] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[   84.020729] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:22:HDMI-A-1] disconnected
>[   84.020730] [drm:drm_mode_getconnector] [CONNECTOR:22:?]
>[   84.020731] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:22:HDMI-A-1]
>[   84.020732] [drm:intel_hdmi_detect] [CONNECTOR:22:HDMI-A-1]
>[   84.020894] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[   84.020896] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[   84.020898] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:22:HDMI-A-1] disconnected
>[   84.020913] [drm:drm_mode_getconnector] [CONNECTOR:24:?]
>[   84.020915] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:24:DP-2]
>[   84.020917] [drm:intel_dp_detect] [CONNECTOR:24:DP-2]
>[   84.020919] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:24:DP-2] disconnected
>[   84.020921] [drm:drm_mode_getconnector] [CONNECTOR:24:?]
>[   84.020923] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:24:DP-2]
>[   84.020924] [drm:intel_dp_detect] [CONNECTOR:24:DP-2]
>[   84.020927] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:24:DP-2] disconnected
>[   84.020939] [drm:drm_mode_getconnector] [CONNECTOR:25:?]
>[   84.020941] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:25:HDMI-A-2]
>[   84.020942] [drm:intel_hdmi_detect] [CONNECTOR:25:HDMI-A-2]
>[   84.021099] [drm:gmbus_xfer] GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1)
>[   84.021101] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
>[   84.021102] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:25:HDMI-A-2] disconnected
>[   84.021105] [drm:drm_mode_getconnector] [CONNECTOR:25:?]
>[   84.021107] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:25:HDMI-A-2]
>[   84.021108] [drm:intel_hdmi_detect] [CONNECTOR:25:HDMI-A-2]
>[   84.021269] [drm:gmbus_xfer] GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1)
>[   84.021271] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
>[   84.021273] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:25:HDMI-A-2] disconnected
>[   84.028352] [drm:drm_mode_setcrtc] [CRTC:6]
>[   84.028355] [drm:intel_crtc_set_config] [CRTC:6] [NOFB]
>[   84.028358] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:6], mode_changed=1, fb_changed=0
>[   84.028359] [drm:intel_modeset_stage_output_state] [CONNECTOR:16:VGA-1] to [NOCRTC]
>[   84.028360] [drm:intel_modeset_stage_output_state] encoder changed, full mode switch
>[   84.028361] [drm:intel_modeset_stage_output_state] crtc changed, full mode switch
>[   84.028362] [drm:intel_modeset_stage_output_state] crtc disabled, full mode switch
>[   84.028364] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 1
>[   84.055841] [drm:intel_update_fbc] no output, disabling
>[   84.055844] [drm:intel_ddi_put_crtc_pll] Disabling SPLL
>[   84.055850] [drm:intel_display_power_put] disabling always-on
>[   84.055854] [drm:check_encoder_state] [ENCODER:17:DAC-17]
>[   84.055855] [drm:check_encoder_state] [ENCODER:18:TMDS-18]
>[   84.055856] [drm:check_encoder_state] [ENCODER:23:TMDS-23]
>[   84.055857] [drm:check_crtc_state] [CRTC:6]
>[   84.055859] [drm:check_crtc_state] [CRTC:10]
>[   84.055860] [drm:check_crtc_state] [CRTC:14]
>[   84.055868] [drm:drm_mode_setcrtc] [CRTC:10]
>[   84.055870] [drm:intel_crtc_set_config] [CRTC:10] [NOFB]
>[   84.055872] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:10], mode_changed=0, fb_changed=0
>[   84.055873] [drm:drm_mode_setcrtc] [CRTC:14]
>[   84.055874] [drm:intel_crtc_set_config] [CRTC:14] [NOFB]
>[   84.055875] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:14], mode_changed=0, fb_changed=0
>[   85.023307] [drm:intel_display_power_put] disabling display
>[   85.023313] [drm:hsw_set_power_well] Requesting to disable the power well
>[   85.023330] [drm:intel_runtime_suspend] Suspending device
>[   85.023346] [drm:hsw_enable_pc8] Enabling package C8+
>[   85.037205] [drm:intel_runtime_suspend] Device suspended
>[   86.240988] PM: Syncing filesystems ... done.
>[   86.403719] PM: Preparing system for mem sleep
>[   86.403841] Freezing user space processes ... (elapsed 0.001 seconds) done.
>[   86.405011] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done.
>[   86.405828] PM: Entering mem sleep
>[   86.405881] Suspending console(s) (use no_console_suspend to debug)
>[   86.406042] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[   86.406191] sd 0:0:0:0: [sda] Stopping disk
>[   86.441346] serial 00:06: disabled
>[   86.441349] serial 00:06: System wakeup disabled by ACPI
>[   86.441780] [drm:intel_runtime_resume] Resuming device
>[   86.443749] [drm:hsw_disable_pc8] Disabling package C8+
>[   86.559885] [drm:intel_runtime_resume] Device resumed
>[   86.559890] [drm:intel_display_power_get] enabling always-on
>[   86.559890] [drm:intel_display_power_get] enabling display
>[   86.559892] [drm:hsw_set_power_well] Enabling power well
>[   86.562278] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
>[   86.565831] [drm:gen6_enable_rps] Overclocking supported. Max: 1200MHz, Overclock max: 1200MHz
>[   86.565845] ------------[ cut here ]------------
>[   86.565858] WARNING: CPU: 0 PID: 1198 at drivers/gpu/drm/i915/i915_irq.c:209 gen6_enable_rps_interrupts+0x39/0x5c [i915]()
>[   86.565868] Modules linked in: ip6table_filter ip6_tables ebtable_nat ebtables nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ipt_REJECT iptable_mangle xt_tcpudp iptable_filter ip_tables x_tables bridge stp llc ipv6 dm_mod snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic iTCO_wdt iTCO_vendor_support dcdbas serio_raw i2c_i801 pcspkr snd_hda_intel snd_hda_controller lpc_ich snd_hda_codec mfd_core snd_hwdep shpchp snd_pcm snd_timer snd soundcore battery acpi_cpufreq i915 video button drm_kms_helper drm
>[   86.565870] CPU: 0 PID: 1198 Comm: kworker/0:2 Not tainted 3.16.0-rc2_drm-intel-nightly_1087d4_20140630+ #64
>[   86.565871] Hardware name: Dell Inc. OptiPlex 9020/0DNKMN, BIOS A03 09/17/2013
>[   86.565876] Workqueue: events intel_gen6_powersave_work [i915]
>[   86.565878]  0000000000000000 0000000000000009 ffffffff8177f9bf 0000000000000000
>[   86.565878]  ffffffff8103983c 0000000000000004 ffffffffa006898d ffff880002e40000
>[   86.565879]  ffff880002e40000 ffff880114b8c800 0000000000040000 ffff880002e48298
>[   86.565880] Call Trace:
>[   86.565883]  [<ffffffff8177f9bf>] ? dump_stack+0x41/0x51
>[   86.565886]  [<ffffffff8103983c>] ? warn_slowpath_common+0x78/0x90
>[   86.565890]  [<ffffffffa006898d>] ? gen6_enable_rps_interrupts+0x39/0x5c [i915]
>[   86.565894]  [<ffffffffa006898d>] ? gen6_enable_rps_interrupts+0x39/0x5c [i915]
>[   86.565899]  [<ffffffffa0070c38>] ? intel_gen6_powersave_work+0xe25/0xf1e [i915]
>[   86.565900]  [<ffffffff8104d5f6>] ? process_one_work+0x1e2/0x363
>[   86.565902]  [<ffffffff8104ddd6>] ? worker_thread+0x2f2/0x3f1
>[   86.565903]  [<ffffffff8104dae4>] ? pool_mayday_timeout+0xf2/0xf2
>[   86.565905]  [<ffffffff8105254a>] ? kthread+0xc5/0xcd
>[   86.565906]  [<ffffffff81052485>] ? kthread_freezable_should_stop+0x40/0x40
>[   86.565907]  [<ffffffff817854ac>] ? ret_from_fork+0x7c/0xb0
>[   86.565909]  [<ffffffff81052485>] ? kthread_freezable_should_stop+0x40/0x40
>[   86.565909] ---[ end trace 89aeffe62720264e ]---
>[   86.612896] [drm:intel_display_power_put] disabling display
>[   86.612898] [drm:hsw_set_power_well] Requesting to disable the power well
>[   86.612899] [drm:intel_display_power_put] disabling always-on
>[   87.217214] PM: suspend of devices complete after 810.905 msecs
>[   87.217400] [drm:hsw_enable_pc8] Enabling package C8+
>[   87.228165] PM: late suspend of devices complete after 10.944 msecs
>[   87.228491] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
>[   87.228552] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
>[   87.228586] e1000e 0000:00:19.0: System wakeup enabled by ACPI
>[   87.228662] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
>[   87.239104] PM: noirq suspend of devices complete after 10.932 msecs
>[   87.239374] ACPI: Preparing to enter system sleep state S3
>[   87.239515] ACPI Error: Field [PMS1] access width (1 bytes) too large for region [SWCR] (length 0) (20140424/exfldio-189)
>[   87.239516] ACPI Error: Field [PMS1] Base+Offset+Width 2+0+1 is beyond end of region [SWCR] (length 0) (20140424/exfldio-203)
>[   87.239519] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.SIOS] (Node ffff88011a041fc8), AE_AML_REGION_LIMIT (20140424/psparse-536)
>[   87.239521] ACPI Error: Method parse/execution failed [\PTS_] (Node ffff88011a052140), AE_AML_REGION_LIMIT (20140424/psparse-536)
>[   87.239523] ACPI Error: Method parse/execution failed [\_PTS] (Node ffff88011a04f4d8), AE_AML_REGION_LIMIT (20140424/psparse-536)
>[   87.239539] PM: Saving platform NVS memory
>[   87.239906] Disabling non-boot CPUs ...
>[   87.241357] smpboot: CPU 1 is now offline
>[   87.242693] smpboot: CPU 2 is now offline
>[   87.244137] smpboot: CPU 3 is now offline
>[   87.245781] smpboot: CPU 4 is now offline
>[   87.247092] smpboot: CPU 5 is now offline
>[   87.247314] Broke affinity for irq 23
>[   87.248339] smpboot: CPU 6 is now offline
>[   87.248643] Broke affinity for irq 16
>[   87.248652] Broke affinity for irq 42
>[   87.249668] smpboot: CPU 7 is now offline
>[   87.250807] ACPI: Low-level resume complete
>[   87.250841] PM: Restoring platform NVS memory
>[   87.251236] CPU0: Thermal LVT vector (0xfa) already installed
>[   87.251264] Enabling non-boot CPUs ...
>[   87.251290] x86: Booting SMP configuration:
>[   87.251291] smpboot: Booting Node 0 Processor 1 APIC 0x2
>[   87.262420] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
>ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
>[   87.263151] CPU1: Thermal LVT vector (0xfa) already installed
>[   87.265420] CPU1 is up
>[   87.265433] smpboot: Booting Node 0 Processor 2 APIC 0x4
>[   87.277303] CPU2: Thermal LVT vector (0xfa) already installed
>[   87.279548] CPU2 is up
>[   87.279559] smpboot: Booting Node 0 Processor 3 APIC 0x6
>[   87.291441] CPU3: Thermal LVT vector (0xfa) already installed
>[   87.293675] CPU3 is up
>[   87.293686] smpboot: Booting Node 0 Processor 4 APIC 0x1
>[   87.305528] CPU4: Thermal LVT vector (0xfa) already installed
>[   87.307765] CPU4 is up
>[   87.307774] smpboot: Booting Node 0 Processor 5 APIC 0x3
>[   87.319617] CPU5: Thermal LVT vector (0xfa) already installed
>[   87.321852] CPU5 is up
>[   87.321860] smpboot: Booting Node 0 Processor 6 APIC 0x5
>[   87.333717] CPU6: Thermal LVT vector (0xfa) already installed
>[   87.335938] CPU6 is up
>[   87.335947] smpboot: Booting Node 0 Processor 7 APIC 0x7
>[   87.347813] CPU7: Thermal LVT vector (0xfa) already installed
>[   87.350034] CPU7 is up
>[   87.355456] ACPI: Waking up from system sleep state S3
>[   87.355639] ACPI Error: Field [PMS1] access width (1 bytes) too large for region [SWCR] (length 0) (20140424/exfldio-189)
>[   87.355641] ACPI Error: Field [PMS1] Base+Offset+Width 2+0+1 is beyond end of region [SWCR] (length 0) (20140424/exfldio-203)
>[   87.355644] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.SIOW] (Node ffff88011a042000), AE_AML_REGION_LIMIT (20140424/psparse-536)
>[   87.355645] ACPI Error: Method parse/execution failed [\WAK_] (Node ffff88011a052168), AE_AML_REGION_LIMIT (20140424/psparse-536)
>[   87.355647] ACPI Error: Method parse/execution failed [\_WAK] (Node ffff88011a04f500), AE_AML_REGION_LIMIT (20140424/psparse-536)
>[   87.355649] ACPI Exception: AE_AML_REGION_LIMIT, While executing method \_WAK (20140424/hwesleep-83)
>[   87.356632] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
>[   87.356636] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
>[   87.356654] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
>[   87.366560] PM: noirq resume of devices complete after 10.901 msecs
>[   87.366587] [drm:hsw_disable_pc8] Disabling package C8+
>[   87.368553] [drm:intel_display_power_get] enabling always-on
>[   87.368553] [drm:intel_display_power_get] enabling display
>[   87.368608] PM: early resume of devices complete after 2.030 msecs
>[   87.368673] e1000e 0000:00:19.0: System wakeup disabled by ACPI
>[   87.368713] snd_hda_intel 0000:00:03.0: irq 50 for MSI/MSI-X
>[   87.368821] snd_hda_intel 0000:00:1b.0: irq 51 for MSI/MSI-X
>[   87.368987] sd 0:0:0:0: [sda] Starting disk
>[   87.369508] ACPI Error: Field [DRQL] at 144 exceeds Buffer [NULL] size 128 (bits) (20140424/dsopcode-236)
>[   87.369512] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.SIO1.DSRS] (Node ffff88011a041eb0), AE_AML_BUFFER_LIMIT (20140424/psparse-536)
>[   87.369515] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.UAR1._SRS] (Node ffff88011a042550), AE_AML_BUFFER_LIMIT (20140424/psparse-536)
>[   87.369518] serial 00:06: activation failed
>[   87.369522] dpm_run_callback(): pnp_bus_resume+0x0/0x90 returns -5
>[   87.369523] PM: Device 00:06 failed to resume: error -5
>[   87.369526] [drm:i915_redisable_vga_power_on] Something enabled VGA plane, disabling it
>[   87.369843] [drm:intel_opregion_setup] graphic opregion physical addr: 0xda7f9018
>[   87.369848] [drm:intel_opregion_setup] Public ACPI methods supported
>[   87.369848] [drm:intel_opregion_setup] SWSCI supported
>[   87.375530] [drm:swsci_setup] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483
>[   87.375531] [drm:intel_opregion_setup] ASLE supported
>[   87.375720] [drm:intel_crt_reset] pch crt adpa set to 0x80f40010
>[   87.375723] [drm:init_status_page] render ring hws offset: 0x7fff0000
>[   87.377548] [drm:init_status_page] bsd ring hws offset: 0x001c2000
>[   87.377565] [drm:init_status_page] blitter ring hws offset: 0x001e3000
>[   87.377578] [drm:init_status_page] video enhancement ring hws offset: 0x00204000
>[   87.377711] [drm:intel_modeset_readout_hw_state] [CRTC:6] hw state readout: enabled
>[   87.377712] [drm:intel_modeset_readout_hw_state] [CRTC:10] hw state readout: disabled
>[   87.377713] [drm:intel_modeset_readout_hw_state] [CRTC:14] hw state readout: disabled
>[   87.377714] [drm:intel_ddi_get_crtc_pll] Pipe A connected to port E using clock 0x60000000
>[   87.377717] [drm:intel_modeset_readout_hw_state] [ENCODER:17:DAC-17] hw state readout: enabled, pipe A
>[   87.377718] [drm:intel_modeset_readout_hw_state] [ENCODER:18:TMDS-18] hw state readout: disabled, pipe A
>[   87.377719] [drm:intel_modeset_readout_hw_state] [ENCODER:23:TMDS-23] hw state readout: disabled, pipe A
>[   87.377720] [drm:intel_modeset_readout_hw_state] [CONNECTOR:16:VGA-1] hw state readout: enabled
>[   87.377721] [drm:intel_modeset_readout_hw_state] [CONNECTOR:19:DP-1] hw state readout: disabled
>[   87.377722] [drm:intel_modeset_readout_hw_state] [CONNECTOR:22:HDMI-A-1] hw state readout: disabled
>[   87.377723] [drm:intel_modeset_readout_hw_state] [CONNECTOR:24:DP-2] hw state readout: disabled
>[   87.377723] [drm:intel_modeset_readout_hw_state] [CONNECTOR:25:HDMI-A-2] hw state readout: disabled
>[   87.377725] [drm:intel_dump_pipe_config] [CRTC:6][setup_hw_state] config for pipe A
>[   87.377726] [drm:intel_dump_pipe_config] cpu_transcoder: A
>[   87.377726] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
>[   87.377727] [drm:intel_dump_pipe_config] fdi/pch: 1, lanes: 1, gmch_m: 2639615, gmch_n: 8388608, link_m: 54991, link_n: 524288, tu: 64
>[   87.377728] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[   87.377728] [drm:intel_dump_pipe_config] requested mode:
>[   87.377730] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 720 0 0 0 400 0 0 0 0x0 0x0
>[   87.377730] [drm:intel_dump_pipe_config] adjusted mode:
>[   87.377731] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x6
>[   87.377732] [drm:intel_dump_crtc_timings] crtc timings: 28319 720 738 846 900 400 413 415 449, type: 0x0 flags: 0x6
>[   87.377733] [drm:intel_dump_pipe_config] port clock: 270000
>[   87.377733] [drm:intel_dump_pipe_config] pipe src size: 720x400
>[   87.377734] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[   87.377734] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x02d00190, enabled
>[   87.377735] [drm:intel_dump_pipe_config] ips: 0
>[   87.377735] [drm:intel_dump_pipe_config] double wide: 0
>[   87.377736] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe B
>[   87.377737] [drm:i915_get_vblank_timestamp] crtc 1 is disabled
>[   87.377737] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe B
>[   87.377738] [drm:intel_dump_pipe_config] [CRTC:10][setup_hw_state] config for pipe B
>[   87.377739] [drm:intel_dump_pipe_config] cpu_transcoder: B
>[   87.377739] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
>[   87.377740] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[   87.377740] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[   87.377741] [drm:intel_dump_pipe_config] requested mode:
>[   87.377742] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[   87.377742] [drm:intel_dump_pipe_config] adjusted mode:
>[   87.377743] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[   87.377743] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[   87.377744] [drm:intel_dump_pipe_config] port clock: 0
>[   87.377744] [drm:intel_dump_pipe_config] pipe src size: 0x0
>[   87.377745] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[   87.377745] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[   87.377746] [drm:intel_dump_pipe_config] ips: 0
>[   87.377746] [drm:intel_dump_pipe_config] double wide: 0
>[   87.377747] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe C
>[   87.377747] [drm:i915_get_vblank_timestamp] crtc 2 is disabled
>[   87.377748] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe C
>[   87.377748] [drm:intel_dump_pipe_config] [CRTC:14][setup_hw_state] config for pipe C
>[   87.377749] [drm:intel_dump_pipe_config] cpu_transcoder: C
>[   87.377749] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
>[   87.377750] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[   87.377750] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[   87.377751] [drm:intel_dump_pipe_config] requested mode:
>[   87.377751] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[   87.377752] [drm:intel_dump_pipe_config] adjusted mode:
>[   87.377752] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[   87.377753] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[   87.377753] [drm:intel_dump_pipe_config] port clock: 0
>[   87.377754] [drm:intel_dump_pipe_config] pipe src size: 0x0
>[   87.377754] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[   87.377755] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[   87.377755] [drm:intel_dump_pipe_config] ips: 0
>[   87.377755] [drm:intel_dump_pipe_config] double wide: 0
>[   87.377759] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 1
>[   87.395593] [drm:intel_ddi_put_crtc_pll] Disabling SPLL
>[   87.395596] [drm:intel_display_power_put] disabling always-on
>[   87.395597] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0
>[   87.395598] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0
>[   87.395600] [drm:check_encoder_state] [ENCODER:17:DAC-17]
>[   87.395601] [drm:check_encoder_state] [ENCODER:18:TMDS-18]
>[   87.395601] [drm:check_encoder_state] [ENCODER:23:TMDS-23]
>[   87.395602] [drm:check_crtc_state] [CRTC:6]
>[   87.395603] [drm:check_crtc_state] [CRTC:10]
>[   87.395603] [drm:check_crtc_state] [CRTC:14]
>[   87.395611] [drm:intel_crt_detect] [CONNECTOR:16:VGA-1] force=0
>[   87.395611] [drm:intel_display_power_get] enabling always-on
>[   87.395613] [drm:intel_ironlake_crt_detect_hotplug] trigger hotplug detect cycle: adpa=0x3f40010
>[   87.405555] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0x3f40010, result 1
>[   87.405555] [drm:intel_crt_detect] CRT detected via hotplug
>[   87.405556] [drm:intel_display_power_put] disabling always-on
>[   87.405557] [drm:drm_helper_hpd_irq_event] [CONNECTOR:16:VGA-1] status updated from unknown to connected
>[   87.405558] [drm:intel_display_power_get] enabling always-on
>[   87.405558] [drm:intel_dp_detect] [CONNECTOR:19:DP-1]
>[   87.405560] [drm:intel_display_power_put] disabling always-on
>[   87.405560] [drm:drm_helper_hpd_irq_event] [CONNECTOR:19:DP-1] status updated from unknown to disconnected
>[   87.405561] [drm:intel_hdmi_detect] [CONNECTOR:22:HDMI-A-1]
>[   87.405561] [drm:intel_display_power_get] enabling always-on
>[   87.405750] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[   87.405751] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[   87.405752] [drm:intel_display_power_put] disabling always-on
>[   87.405753] [drm:drm_helper_hpd_irq_event] [CONNECTOR:22:HDMI-A-1] status updated from unknown to disconnected
>[   87.405754] [drm:intel_display_power_get] enabling always-on
>[   87.405754] [drm:intel_dp_detect] [CONNECTOR:24:DP-2]
>[   87.405756] [drm:intel_display_power_put] disabling always-on
>[   87.405756] [drm:drm_helper_hpd_irq_event] [CONNECTOR:24:DP-2] status updated from unknown to disconnected
>[   87.405757] [drm:intel_hdmi_detect] [CONNECTOR:25:HDMI-A-2]
>[   87.405757] [drm:intel_display_power_get] enabling always-on
>[   87.405942] [drm:gmbus_xfer] GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1)
>[   87.405943] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
>[   87.405944] [drm:intel_display_power_put] disabling always-on
>[   87.405944] [drm:drm_helper_hpd_irq_event] [CONNECTOR:25:HDMI-A-2] status updated from unknown to disconnected
>[   87.463011] e1000e 0000:00:19.0: irq 52 for MSI/MSI-X
>[   87.519945] PM: resume of devices complete after 151.272 msecs
>[   87.541539] PM: Finishing wakeup.
>[   87.541540] Restarting tasks ... done.
>[   87.541702] video LNXVIDEO:00: Restoring backlight state
>[   87.615825] usb 2-1.5: new low-speed USB device number 7 using ehci-pci
>[   87.675673] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[   87.677790] ata3.00: configured for UDMA/100
>[   87.690805] usb 2-1.5: device descriptor read/64, error -32
>[   87.866930] usb 2-1.5: device descriptor read/64, error -32
>[   88.041003] usb 2-1.5: new low-speed USB device number 8 using ehci-pci
>[   88.116034] usb 2-1.5: device descriptor read/64, error -32
>[   88.292014] usb 2-1.5: device descriptor read/64, error -32
>[   88.374056] [drm:intel_display_power_put] disabling display
>[   88.374059] [drm:hsw_set_power_well] Requesting to disable the power well
>[   88.466087] usb 2-1.5: new low-speed USB device number 9 using ehci-pci
>[   88.746141] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
>[   88.750115] [drm:gen6_enable_rps] Overclocking supported. Max: 1200MHz, Overclock max: 1200MHz
>[   88.794167] [drm:intel_runtime_suspend] Suspending device
>[   88.794184] [drm:hsw_enable_pc8] Enabling package C8+
>[   88.808167] [drm:intel_runtime_suspend] Device suspended
>[   88.846201] [drm:intel_runtime_resume] Resuming device
>[   88.848159] [drm:hsw_disable_pc8] Disabling package C8+
>[   88.868212] usb 2-1.5: device not accepting address 9, error -32
>[   88.941423] usb 2-1.5: new low-speed USB device number 10 using ehci-pci
>[   88.962258] [drm:intel_runtime_resume] Device resumed
>[   88.962318] [drm:intel_crtc_set_config] [CRTC:6] [FB:33] #connectors=1 (x y) (0 0)
>[   88.962320] [drm:intel_set_config_compute_mode_changes] inactive crtc, full mode set
>[   88.962321] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:6], mode_changed=1, fb_changed=0
>[   88.962321] [drm:intel_modeset_stage_output_state] encoder changed, full mode switch
>[   88.962322] [drm:intel_modeset_stage_output_state] [CONNECTOR:16:VGA-1] to [CRTC:6]
>[   88.962322] [drm:intel_modeset_stage_output_state] crtc changed, full mode switch
>[   88.962323] [drm:intel_modeset_stage_output_state] crtc enabled, full mode switch
>[   88.962324] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
>[   88.962325] [drm:connected_sink_compute_bpp] [CONNECTOR:16:VGA-1] checking for sink bpp constrains
>[   88.962327] [drm:ironlake_check_fdi_lanes] checking fdi config on pipe A, lanes 1
>[   88.962327] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0
>[   88.962328] [drm:intel_dump_pipe_config] [CRTC:6][modeset] config for pipe A
>[   88.962329] [drm:intel_dump_pipe_config] cpu_transcoder: A
>[   88.962329] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
>[   88.962330] [drm:intel_dump_pipe_config] fdi/pch: 1, lanes: 1, gmch_m: 3029219, gmch_n: 4194304, link_m: 126217, link_n: 524288, tu: 64
>[   88.962331] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[   88.962331] [drm:intel_dump_pipe_config] requested mode:
>[   88.962333] [drm:drm_mode_debug_printmodeline] Modeline 0:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[   88.962333] [drm:intel_dump_pipe_config] adjusted mode:
>[   88.962334] [drm:drm_mode_debug_printmodeline] Modeline 0:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[   88.962335] [drm:intel_dump_crtc_timings] crtc timings: 65000 1024 1048 1184 1344 768 771 777 806, type: 0x40 flags: 0xa
>[   88.962336] [drm:intel_dump_pipe_config] port clock: 270000
>[   88.962336] [drm:intel_dump_pipe_config] pipe src size: 1024x768
>[   88.962337] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[   88.962338] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[   88.962338] [drm:intel_dump_pipe_config] ips: 0
>[   88.962338] [drm:intel_dump_pipe_config] double wide: 0
>[   88.962340] [drm:intel_display_power_get] enabling always-on
>[   88.962341] [drm:intel_display_power_get] enabling display
>[   88.962342] [drm:hsw_set_power_well] Enabling power well
>[   88.964239] [drm:intel_ddi_pll_select] Using SPLL on pipe A
>[   88.964271] [drm:ironlake_update_primary_plane] Writing base 00226000 00000000 0 0 4096
>[   88.965145] [drm:hsw_fdi_link_train] FDI link training done on step 0
>[   88.965242] [drm:lpt_program_iclkip] iCLKIP clock: found settings for 65000KHz refresh rate: auxdiv=0, divsel=27, phasedir=0, phaseinc=22
>[   88.965308] [drm:intel_update_fbc] disabled per chip default
>[   88.965311] [drm:intel_connector_check_state] [CONNECTOR:16:VGA-1]
>[   88.965313] [drm:check_encoder_state] [ENCODER:17:DAC-17]
>[   88.965314] [drm:check_encoder_state] [ENCODER:18:TMDS-18]
>[   88.965315] [drm:check_encoder_state] [ENCODER:23:TMDS-23]
>[   88.965315] [drm:check_crtc_state] [CRTC:6]
>[   88.965323] [drm:check_crtc_state] [CRTC:10]
>[   88.965324] [drm:check_crtc_state] [CRTC:14]
>[   88.965326] [drm:intel_crtc_set_config] [CRTC:10] [NOFB]
>[   88.965328] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:10], mode_changed=0, fb_changed=0
>[   88.965328] [drm:intel_modeset_stage_output_state] [CONNECTOR:16:VGA-1] to [CRTC:6]
>[   88.965329] [drm:intel_crtc_set_config] [CRTC:14] [NOFB]
>[   88.965330] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:14], mode_changed=0, fb_changed=0
>[   88.965330] [drm:intel_modeset_stage_output_state] [CONNECTOR:16:VGA-1] to [CRTC:6]
>[   88.965331] [drm:drm_fb_helper_hotplug_event] 
>[   88.965332] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:16:VGA-1]
>[   88.965333] [drm:intel_crt_detect] [CONNECTOR:16:VGA-1] force=1
>[   88.965335] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0x83f40000, result 1
>[   88.965336] [drm:intel_crt_detect] CRT detected via hotplug
>[   88.965541] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
>[   88.965543] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[   88.965544] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[   88.965544] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
>[   88.965919] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[   88.965920] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
>[   88.965927] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:16:VGA-1] probed modes :
>[   88.965928] [drm:drm_mode_debug_printmodeline] Modeline 31:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[   88.965929] [drm:drm_mode_debug_printmodeline] Modeline 29:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[   88.965930] [drm:drm_mode_debug_printmodeline] Modeline 28:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
>[   88.965931] [drm:drm_mode_debug_printmodeline] Modeline 30:"848x480" 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
>[   88.965932] [drm:drm_mode_debug_printmodeline] Modeline 27:"640x480" 60 25175 640 656 752 800 480 489 492 525 0x40 0xa
>[   88.965933] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:DP-1]
>[   88.965934] [drm:intel_dp_detect] [CONNECTOR:19:DP-1]
>[   88.965936] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:DP-1] disconnected
>[   88.965937] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:22:HDMI-A-1]
>[   88.965937] [drm:intel_hdmi_detect] [CONNECTOR:22:HDMI-A-1]
>[   88.966087] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[   88.966088] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[   88.966088] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:22:HDMI-A-1] disconnected
>[   88.966089] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:24:DP-2]
>[   88.966089] [drm:intel_dp_detect] [CONNECTOR:24:DP-2]
>[   88.966091] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:24:DP-2] disconnected
>[   88.966092] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:25:HDMI-A-2]
>[   88.966092] [drm:intel_hdmi_detect] [CONNECTOR:25:HDMI-A-2]
>[   88.966283] [drm:gmbus_xfer] GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1)
>[   88.966284] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
>[   88.966285] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:25:HDMI-A-2] disconnected
>[   88.966286] [drm:drm_setup_crtcs] 
>[   88.966287] [drm:drm_enable_connectors] connector 16 enabled? yes
>[   88.966288] [drm:drm_enable_connectors] connector 19 enabled? no
>[   88.966288] [drm:drm_enable_connectors] connector 22 enabled? no
>[   88.966289] [drm:drm_enable_connectors] connector 24 enabled? no
>[   88.966289] [drm:drm_enable_connectors] connector 25 enabled? no
>[   88.966290] [drm:intel_fb_initial_config] looking for cmdline mode on connector VGA-1
>[   88.966291] [drm:intel_fb_initial_config] looking for preferred mode on connector VGA-1
>[   88.966291] [drm:intel_fb_initial_config] using first mode listed on connector VGA-1
>[   88.966292] [drm:intel_fb_initial_config] connector VGA-1 on pipe A [CRTC:6]: 1024x768
>[   88.966293] [drm:intel_fb_initial_config] connector DP-1 not enabled, skipping
>[   88.966293] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping
>[   88.966294] [drm:intel_fb_initial_config] connector DP-2 not enabled, skipping
>[   88.966294] [drm:intel_fb_initial_config] connector HDMI-A-2 not enabled, skipping
>[   88.966295] [drm:drm_setup_crtcs] desired mode 1024x768 set on crtc 6
>[   88.966298] [drm:intel_crtc_set_config] [CRTC:6] [FB:33] #connectors=1 (x y) (0 0)
>[   88.966300] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:6], mode_changed=0, fb_changed=0
>[   88.966300] [drm:intel_modeset_stage_output_state] [CONNECTOR:16:VGA-1] to [CRTC:6]
>[   88.966302] [drm:intel_crtc_set_config] [CRTC:10] [NOFB]
>[   88.966302] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:10], mode_changed=0, fb_changed=0
>[   88.966303] [drm:intel_modeset_stage_output_state] [CONNECTOR:16:VGA-1] to [CRTC:6]
>[   88.966303] [drm:intel_crtc_set_config] [CRTC:14] [NOFB]
>[   88.966304] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:14], mode_changed=0, fb_changed=0
>[   88.966305] [drm:intel_modeset_stage_output_state] [CONNECTOR:16:VGA-1] to [CRTC:6]
>[   88.966307] [drm:intel_crtc_set_config] [CRTC:6] [FB:33] #connectors=1 (x y) (0 0)
>[   88.966308] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:6], mode_changed=0, fb_changed=0
>[   88.966309] [drm:intel_modeset_stage_output_state] [CONNECTOR:16:VGA-1] to [CRTC:6]
>[   88.966315] [drm:intel_crtc_set_config] [CRTC:6] [FB:33] #connectors=1 (x y) (0 0)
>[   88.966315] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:6], mode_changed=0, fb_changed=0
>[   88.966316] [drm:intel_modeset_stage_output_state] [CONNECTOR:16:VGA-1] to [CRTC:6]
>[   88.967908] [drm:intel_crtc_set_config] [CRTC:6] [FB:33] #connectors=1 (x y) (0 0)
>[   88.967909] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:6], mode_changed=0, fb_changed=0
>[   88.967910] [drm:intel_modeset_stage_output_state] [CONNECTOR:16:VGA-1] to [CRTC:6]
>[   88.967911] [drm:intel_crtc_set_config] [CRTC:10] [NOFB]
>[   88.967912] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:10], mode_changed=0, fb_changed=0
>[   88.967913] [drm:intel_modeset_stage_output_state] [CONNECTOR:16:VGA-1] to [CRTC:6]
>[   88.967914] [drm:intel_crtc_set_config] [CRTC:14] [NOFB]
>[   88.967915] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:14], mode_changed=0, fb_changed=0
>[   88.967916] [drm:intel_modeset_stage_output_state] [CONNECTOR:16:VGA-1] to [CRTC:6]
>[   89.343397] usb 2-1.5: device not accepting address 10, error -32
>[   89.343523] usb 2-1-port5: unable to enumerate USB device
>[   90.530441] e1000e: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
>[   90.739073] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
>[   90.742945] [drm:gen6_enable_rps] Overclocking supported. Max: 1200MHz, Overclock max: 1200MHz
>[   92.420633] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[   92.422315] ata1.00: configured for UDMA/133

Actions: View

Attachments on bug 80517: 101734 | 101893 | 102000

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.