Attachment 102041 Details for Bug 75789 – dmesg(bdw-pc8-fixes branch)

dmesg(bdw-pc8-fixes branch)

dmesg_pc8_0701.txt (text/plain), 94.92 KB, created by lu hua on 2014-07-01 02:56:47 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: lu hua

Created: 2014-07-01 02:56:47 UTC

Size: 94.92 KB

patch

obsolete

>[    0.000000] Initializing cgroup subsys cpuset
>[    0.000000] Initializing cgroup subsys cpu
>[    0.000000] Initializing cgroup subsys cpuacct
>[    0.000000] Linux version 3.16.0-rc2_kcloud_619f97_20140701+ (root@x-kcloud3) (gcc version 4.8.2 20131212 (Red Hat 4.8.2-7) (GCC) ) #2 SMP Tue Jul 1 10:25:29 EDT 2014
>[    0.000000] Command line: BOOT_IMAGE=kernels//kcloud/619f97296260053507a98bd7506ca0a249c294b5/bzImage_x86_64 root=/dev/sda2 drm.debug=0xe modules_path=kernels//kcloud/619f97296260053507a98bd7506ca0a249c294b5/modules_x86_64/lib/modules/3.16.0-rc2_kcloud_619f97_20140701+ acpi_rsdp=0xab7e1014 kexec_jump_back_entry=0x8ac57d78
>[    0.000000] e820: BIOS-provided physical RAM map:
>[    0.000000] BIOS-e820: [mem 0x0000000000000100-0x0000000000057fff] usable
>[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
>[    0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000a84a1fff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000a84a2000-0x00000000a84c0fff] ACPI data
>[    0.000000] BIOS-e820: [mem 0x00000000a84c1000-0x00000000ab1fafff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000ab1fb000-0x00000000ab762fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000ab763000-0x00000000ab7b5fff] ACPI NVS
>[    0.000000] BIOS-e820: [mem 0x00000000ab7b6000-0x00000000ab7e1fff] ACPI data
>[    0.000000] BIOS-e820: [mem 0x00000000ab7e2000-0x00000000ab7fefff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000014f7fffff] usable
>[    0.000000] NX (Execute Disable) protection: active
>[    0.000000] DMI not present or invalid.
>[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
>[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
>[    0.000000] AGP: No AGP bridge found
>[    0.000000] e820: last_pfn = 0x14f800 max_arch_pfn = 0x400000000
>[    0.000000] MTRR default type: write-back
>[    0.000000] MTRR fixed ranges enabled:
>[    0.000000]   00000-9FFFF write-back
>[    0.000000]   A0000-BFFFF uncachable
>[    0.000000]   C0000-FFFFF write-protect
>[    0.000000] MTRR variable ranges enabled:
>[    0.000000]   0 base 00C0000000 mask 7FC0000000 uncachable
>[    0.000000]   1 base 00B0000000 mask 7FF0000000 uncachable
>[    0.000000]   2 base 00AE000000 mask 7FFE000000 uncachable
>[    0.000000]   3 base 00AD000000 mask 7FFF000000 uncachable
>[    0.000000]   4 disabled
>[    0.000000]   5 disabled
>[    0.000000]   6 disabled
>[    0.000000]   7 disabled
>[    0.000000]   8 disabled
>[    0.000000]   9 disabled
>[    0.000000] x86 PAT enabled: cpu 0, old 0x7010600070106, new 0x7010600070106
>[    0.000000] e820: last_pfn = 0xab7ff max_arch_pfn = 0x400000000
>[    0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
>[    0.000000] Using GB pages for direct mapping
>[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
>[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
>[    0.000000] BRK [0x03350000, 0x03350fff] PGTABLE
>[    0.000000] BRK [0x03351000, 0x03351fff] PGTABLE
>[    0.000000] BRK [0x03352000, 0x03352fff] PGTABLE
>[    0.000000] init_memory_mapping: [mem 0x14f600000-0x14f7fffff]
>[    0.000000]  [mem 0x14f600000-0x14f7fffff] page 2M
>[    0.000000] BRK [0x03353000, 0x03353fff] PGTABLE
>[    0.000000] init_memory_mapping: [mem 0x14c000000-0x14f5fffff]
>[    0.000000]  [mem 0x14c000000-0x14f5fffff] page 2M
>[    0.000000] init_memory_mapping: [mem 0x100000000-0x14bffffff]
>[    0.000000]  [mem 0x100000000-0x13fffffff] page 1G
>[    0.000000]  [mem 0x140000000-0x14bffffff] page 2M
>[    0.000000] init_memory_mapping: [mem 0x00100000-0xa84a1fff]
>[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
>[    0.000000]  [mem 0x00200000-0x3fffffff] page 2M
>[    0.000000]  [mem 0x40000000-0x7fffffff] page 1G
>[    0.000000]  [mem 0x80000000-0xa83fffff] page 2M
>[    0.000000]  [mem 0xa8400000-0xa84a1fff] page 4k
>[    0.000000] init_memory_mapping: [mem 0xa84c1000-0xab1fafff]
>[    0.000000]  [mem 0xa84c1000-0xa85fffff] page 4k
>[    0.000000]  [mem 0xa8600000-0xaaffffff] page 2M
>[    0.000000]  [mem 0xab000000-0xab1fafff] page 4k
>[    0.000000] BRK [0x03354000, 0x03354fff] PGTABLE
>[    0.000000] init_memory_mapping: [mem 0xab7e2000-0xab7fefff]
>[    0.000000]  [mem 0xab7e2000-0xab7fefff] page 4k
>[    0.000000] BRK [0x03355000, 0x03355fff] PGTABLE
>[    0.000000] ACPI: Early table checksum verification disabled
>[    0.000000] ACPI: RSDP 0x00000000AB7E1014 000024 (v02 INTEL )
>[    0.000000] ACPI: XSDT 0x00000000AB7C8188 000114 (v01 INTEL  BDW-ULT  00000000      01000013)
>[    0.000000] ACPI: FACP 0x00000000AB7D7000 0000F4 (v05 INTEL  BDW-ULT  00000000 MSFT 0000005F)
>[    0.000000] ACPI: DSDT 0x00000000A84A2000 01E50D (v02 INTEL  BDW      00000000 INTL 20130927)
>[    0.000000] ACPI: FACS 0x00000000AB79D000 000040
>[    0.000000] ACPI: TCPA 0x00000000AB7DF000 000032 (v02 INTEL  EDK2     00000002      01000013)
>[    0.000000] ACPI: UEFI 0x00000000AB7A0000 000042 (v01 INTEL  EDK2     00000002      01000013)
>[    0.000000] ACPI: SSDT 0x00000000AB7DE000 0004B5 (v01 Intel_ Tpm2Tabl 00001000 INTL 20130927)
>[    0.000000] ACPI: SSDT 0x00000000AB7DD000 00004E (v01 MeSsdt MeSsdt   00003000 INTL 20130927)
>[    0.000000] ACPI: TPM2 0x00000000AB7DC000 000034 (v03                 00000000      00000000)
>[    0.000000] ACPI: SSDT 0x00000000AB7DB000 0005B1 (v01 Intel  PerfTune 00001000 INTL 20130927)
>[    0.000000] ACPI: DBGP 0x00000000AB7DA000 000034 (v01 INTEL           00000000 MSFT 0000005F)
>[    0.000000] ACPI: DBG2 0x00000000AB7D9000 000054 (v00 INTEL           00000000 MSFT 0000005F)
>[    0.000000] ACPI: LPIT 0x00000000AB7D8000 000094 (v01 INTEL  BDW-ULT  00000000 MSFT 0000005F)
>[    0.000000] ACPI: HPET 0x00000000AB7D6000 000038 (v01 INTEL  BDW-ULT  00000001 MSFT 0000005F)
>[    0.000000] ACPI: APIC 0x00000000AB7D5000 0000BC (v01 INTEL  BDW-ULT  00000001 MSFT 0000005F)
>[    0.000000] ACPI: MCFG 0x00000000AB7D4000 00003C (v01 INTEL  BDW-ULT  00000001 MSFT 0000005F)
>[    0.000000] ACPI: WDAT 0x00000000AB7D3000 000104 (v01 INTEL  BDW-ULT  00000000 MSFT 0000005F)
>[    0.000000] ACPI: SSDT 0x00000000AB7D2000 000250 (v01 INTEL  sensrhub 00000000 INTL 20130927)
>[    0.000000] ACPI: SSDT 0x00000000AB7CE000 00340B (v01 INTEL  PtidDevc 00001000 INTL 20130927)
>[    0.000000] ACPI: SSDT 0x00000000AB7CD000 000C7D (v01 INTEL  Ther_Rvp 00001000 INTL 20130927)
>[    0.000000] ACPI: SSDT 0x00000000AB7CC000 00017F (v01 INTEL  zpodd    00001000 INTL 20130927)
>[    0.000000] ACPI: BOOT 0x00000000AB7CB000 000028 (v01 INTEL  TIANO    00000002 MSFT 01000013)
>[    0.000000] ACPI: SSDT 0x00000000AB7CA000 00053B (v01 PmRef  Cpu0Ist  00003000 INTL 20130927)
>[    0.000000] ACPI: SSDT 0x00000000AB7C9000 000B74 (v01 CpuRef CpuSsdt  00003000 INTL 20130927)
>[    0.000000] ACPI: SSDT 0x00000000AB7C1000 006F06 (v01 SaSsdt SaSsdt   00003000 INTL 20130927)
>[    0.000000] ACPI: SSDT 0x00000000AB7E0000 0006A7 (v01 CppcTa CppcTabl 00001000 INTL 20130927)
>[    0.000000] ACPI: PCCT 0x00000000AB7C0000 00006E (v05 PcctTa PcctTabl 00001000 INTL 20130927)
>[    0.000000] ACPI: SSDT 0x00000000AB7BF000 000AC4 (v01 Cpc_Ta Cpc_Tabl 00001000 INTL 20130927)
>[    0.000000] ACPI: CSRT 0x00000000AB7BE000 0000C4 (v01 INTL   BDW-ULT  00000001 INTL 20100528)
>[    0.000000] ACPI: DMAR 0x00000000AB7BD000 0000F0 (v01 INTEL  BDW      00000001 INTL 00000001)
>[    0.000000] ACPI: FPDT 0x00000000AB7BC000 000044 (v01 INTEL  EDK2     00000002      01000013)
>[    0.000000] ACPI: ASF! 0x00000000AB7BB000 0000A0 (v32 INTEL   HCG     00000001 TFSM 000F4240)
>[    0.000000] ACPI: BGRT 0x00000000AB7BA000 000038 (v01 INTEL  EDK2     00000002      01000013)
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] No NUMA configuration found
>[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000014f7fffff]
>[    0.000000] Initmem setup node 0 [mem 0x00000000-0x14f7fffff]
>[    0.000000]   NODE_DATA [mem 0x14f7fa000-0x14f7fdfff]
>[    0.000000]  [ffffea0000000000-ffffea00053fffff] PMD -> [ffff88014ae00000-ffff88014edfffff] on node 0
>[    0.000000] Zone ranges:
>[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
>[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
>[    0.000000]   Normal   [mem 0x100000000-0x14f7fffff]
>[    0.000000] Movable zone start for each node
>[    0.000000] Early memory node ranges
>[    0.000000]   node   0: [mem 0x00001000-0x00057fff]
>[    0.000000]   node   0: [mem 0x00059000-0x0009dfff]
>[    0.000000]   node   0: [mem 0x00100000-0xa84a1fff]
>[    0.000000]   node   0: [mem 0xa84c1000-0xab1fafff]
>[    0.000000]   node   0: [mem 0xab7e2000-0xab7fefff]
>[    0.000000]   node   0: [mem 0x100000000-0x14f7fffff]
>[    0.000000] On node 0 totalpages: 1026453
>[    0.000000]   DMA zone: 64 pages used for memmap
>[    0.000000]   DMA zone: 21 pages reserved
>[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
>[    0.000000]   DMA32 zone: 10888 pages used for memmap
>[    0.000000]   DMA32 zone: 696825 pages, LIFO batch:31
>[    0.000000]   Normal zone: 5088 pages used for memmap
>[    0.000000]   Normal zone: 325632 pages, LIFO batch:31
>[    0.000000] Reserving Intel graphics stolen memory at 0xad800000-0xaf7fffff
>[    0.000000] ACPI: PM-Timer IO Port: 0x1808
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0xff] disabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0xff] disabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0xff] disabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0xff] disabled)
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
>[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>[    0.000000] ACPI: IRQ0 used by override.
>[    0.000000] ACPI: IRQ2 used by override.
>[    0.000000] ACPI: IRQ9 used by override.
>[    0.000000] Using ACPI (MADT) for SMP configuration information
>[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
>[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
>[    0.000000] nr_irqs_gsi: 56
>[    0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
>[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xa84a2000-0xa84c0fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xab1fb000-0xab762fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xab763000-0xab7b5fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xab7b6000-0xab7e1fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xab7ff000-0xad7fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xad800000-0xaf7fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xaf800000-0xe00f7fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xe00f8000-0xe00f8fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xe00f9000-0xfed1bfff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xff9fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xffa00000-0xffffffff]
>[    0.000000] e820: [mem 0xaf800000-0xe00f7fff] available for PCI devices
>[    0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
>[    0.000000] PERCPU: Embedded 27 pages/cpu @ffff88014f400000 s78336 r8192 d24064 u262144
>[    0.000000] pcpu-alloc: s78336 r8192 d24064 u262144 alloc=1*2097152
>[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
>[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1010392
>[    0.000000] Policy zone: Normal
>[    0.000000] Kernel command line: BOOT_IMAGE=kernels//kcloud/619f97296260053507a98bd7506ca0a249c294b5/bzImage_x86_64 root=/dev/sda2 drm.debug=0xe modules_path=kernels//kcloud/619f97296260053507a98bd7506ca0a249c294b5/modules_x86_64/lib/modules/3.16.0-rc2_kcloud_619f97_20140701+ acpi_rsdp=0xab7e1014 kexec_jump_back_entry=0x8ac57d78
>[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
>[    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
>[    0.000000] AGP: Checking aperture...
>[    0.000000] AGP: No AGP bridge found
>[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
>[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>[    0.000000] Memory: 3936960K/4105812K available (7605K kernel code, 887K rwdata, 3928K rodata, 23068K init, 620K bss, 168852K reserved)
>[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
>[    0.000000] Hierarchical RCU implementation.
>[    0.000000] 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
>[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
>[    0.000000] NR_IRQS:4352 nr_irqs:1016 16
>[    0.000000] Console: colour dummy device 80x25
>[    0.000000] console [tty0] enabled
>[    0.000000] hpet clockevent registered
>[    0.000000] tsc: Fast TSC calibration using PIT
>[    0.000000] tsc: Detected 1795.853 MHz processor
>[    0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 3591.70 BogoMIPS (lpj=1795853)
>[    0.000008] pid_max: default: 32768 minimum: 301
>[    0.000016] ACPI: Core revision 20140424
>[    0.030795] ACPI: All ACPI Tables successfully acquired
>[    0.030827] Security Framework initialized
>[    0.031123] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
>[    0.032126] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
>[    0.032577] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
>[    0.032586] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
>[    0.032846] CPU: Physical Processor ID: 0
>[    0.032849] CPU: Processor Core ID: 0
>[    0.034061] mce: CPU supports 7 MCE banks
>[    0.034074] CPU0: Thermal LVT vector (0xfa) already installed
>[    0.034084] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
>[    0.034084] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
>[    0.034084] tlb_flushall_shift: 6
>[    0.034564] Freeing SMP alternatives memory: 32K (ffffffff832ac000 - ffffffff832b4000)
>[    0.035243] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>[    0.045244] smpboot: CPU0: Intel(R) Core(TM) i5-5###U CPU @ 1.80GHz (fam: 06, model: 3d, stepping: 04)
>[    0.045255] TSC deadline timer enabled
>[    0.045283] Performance Events: PEBS fmt2+, generic architected perfmon, full-width counters, Intel PMU driver.
>[    0.045291] ... version:                3
>[    0.045293] ... bit width:              48
>[    0.045296] ... generic registers:      4
>[    0.045298] ... value mask:             0000ffffffffffff
>[    0.045300] ... max period:             0000ffffffffffff
>[    0.045303] ... fixed-purpose events:   3
>[    0.045305] ... event mask:             000000070000000f
>[    0.045635] x86: Booting SMP configuration:
>[    0.045639] .... node  #0, CPUs:      #1
>[    0.058005] CPU1: Thermal LVT vector (0xfa) already installed
>[    0.060134]  #2<7>[    0.072677] CPU2: Thermal LVT vector (0xfa) already installed
>[    0.087166]  #3
>[    0.087166] CPU3: Thermal LVT vector (0xfa) already installed
>[    0.089240] x86: Booted up 1 node, 4 CPUs
>[    0.089246] smpboot: Total of 4 processors activated (14366.82 BogoMIPS)
>[    0.094434] devtmpfs: initialized
>[    0.094851] PM: Registering ACPI NVS region [mem 0xab763000-0xab7b5fff] (339968 bytes)
>[    0.095088] xor: automatically using best checksumming function:
>[    0.104186]    avx       : 17208.000 MB/sec
>[    0.104220] RTC time: 19:45:02, date: 06/29/14
>[    0.104284] NET: Registered protocol family 16
>[    0.104547] cpuidle: using governor ladder
>[    0.104551] cpuidle: using governor menu
>[    0.104696] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
>[    0.104700] ACPI: bus type PCI registered
>[    0.104747] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
>[    0.104752] PCI: not using MMCONFIG
>[    0.104754] PCI: Using configuration type 1 for base access
>[    0.125227] raid6: sse2x1    5359 MB/s
>[    0.142247] raid6: sse2x2    6613 MB/s
>[    0.159271] raid6: sse2x4    7929 MB/s
>[    0.176301] raid6: avx2x1   10468 MB/s
>[    0.193323] raid6: avx2x2   12308 MB/s
>[    0.210349] raid6: avx2x4   14394 MB/s
>[    0.210352] raid6: using algorithm avx2x4 (14394 MB/s)
>[    0.210354] raid6: using avx2x2 recovery algorithm
>[    0.210402] ACPI: Added _OSI(Module Device)
>[    0.210405] ACPI: Added _OSI(Processor Device)
>[    0.210408] ACPI: Added _OSI(3.0 _SCP Extensions)
>[    0.210410] ACPI: Added _OSI(Processor Aggregator Device)
>[    0.223555] ACPI: Executed 18 blocks of module-level executable AML code
>[    0.251511] ACPI: Dynamic OEM Table Load:
>[    0.251531] ACPI: SSDT 0xFFFF880149C43800 0004AE (v01 PmRef  Cpu0Cst  00003001 INTL 20130927)
>[    0.256675] ACPI: Dynamic OEM Table Load:
>[    0.256693] ACPI: SSDT 0xFFFF880149C44000 000792 (v01 PmRef  ApIst    00003000 INTL 20130927)
>[    0.262524] ACPI: Dynamic OEM Table Load:
>[    0.262540] ACPI: SSDT 0xFFFF880149BA6000 000119 (v01 PmRef  ApCst    00003000 INTL 20130927)
>[    0.272870] ACPI: Interpreter enabled
>[    0.272880] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
>[    0.272890] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
>[    0.272917] ACPI: (supports S0 S3 S4 S5)
>[    0.272920] ACPI: Using IOAPIC for interrupt routing
>[    0.272946] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
>[    0.275393] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
>[    0.275658] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>[    0.276189] ACPI: Power Resource [PG00] (on)
>[    0.281802] ACPI: Power Resource [PG01] (on)
>[    0.285826] ACPI: Power Resource [PG02] (on)
>[    0.315439] acpi ABCD0000:00: ACPI dock station (docks/bays count: 1)
>[    0.316890] ACPI: Power Resource [FN00] (off)
>[    0.316977] ACPI: Power Resource [FN01] (off)
>[    0.317060] ACPI: Power Resource [FN02] (off)
>[    0.317143] ACPI: Power Resource [FN03] (off)
>[    0.317224] ACPI: Power Resource [FN04] (off)
>[    0.318231] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
>[    0.318240] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
>[    0.319182] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
>[    0.319517] PCI host bridge to bus 0000:00
>[    0.319522] pci_bus 0000:00: root bus resource [bus 00-fe]
>[    0.319525] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
>[    0.319529] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
>[    0.319532] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
>[    0.319536] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
>[    0.319539] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
>[    0.319542] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
>[    0.319545] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff]
>[    0.319549] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
>[    0.319552] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
>[    0.319555] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
>[    0.319558] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
>[    0.319562] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
>[    0.319565] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
>[    0.319568] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
>[    0.319572] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
>[    0.319575] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff]
>[    0.319578] pci_bus 0000:00: root bus resource [mem 0xaf800000-0xfeafffff]
>[    0.319590] pci 0000:00:00.0: [8086:1604] type 00 class 0x060000
>[    0.319855] pci 0000:00:02.0: [8086:1616] type 00 class 0x030000
>[    0.319870] pci 0000:00:02.0: reg 0x10: [mem 0xc0000000-0xc0ffffff 64bit]
>[    0.319879] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
>[    0.319886] pci 0000:00:02.0: reg 0x20: [io  0x3000-0x303f]
>[    0.320137] pci 0000:00:03.0: [8086:160c] type 00 class 0x040300
>[    0.320147] pci 0000:00:03.0: reg 0x10: [mem 0xc1030000-0xc1033fff 64bit]
>[    0.320418] pci 0000:00:14.0: [8086:9cb1] type 00 class 0x0c0330
>[    0.320438] pci 0000:00:14.0: reg 0x10: [mem 0xc1020000-0xc102ffff 64bit]
>[    0.320501] pci 0000:00:14.0: PME# supported from D3hot D3cold
>[    0.320707] pci 0000:00:14.0: System wakeup disabled by ACPI
>[    0.320759] pci 0000:00:16.0: [8086:9cba] type 00 class 0x078000
>[    0.320779] pci 0000:00:16.0: reg 0x10: [mem 0xc1035000-0xc103501f 64bit]
>[    0.320844] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
>[    0.321091] pci 0000:00:19.0: [8086:15a2] type 00 class 0x020000
>[    0.321109] pci 0000:00:19.0: reg 0x10: [mem 0xc1000000-0xc101ffff]
>[    0.321118] pci 0000:00:19.0: reg 0x14: [mem 0xc1038000-0xc1038fff]
>[    0.321127] pci 0000:00:19.0: reg 0x18: [io  0x3080-0x309f]
>[    0.321189] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
>[    0.321390] pci 0000:00:19.0: System wakeup disabled by ACPI
>[    0.321446] pci 0000:00:1f.0: [8086:9cc3] type 00 class 0x060100
>[    0.321794] pci 0000:00:1f.2: [8086:9c83] type 00 class 0x010601
>[    0.321810] pci 0000:00:1f.2: reg 0x10: [io  0x30a8-0x30af]
>[    0.321818] pci 0000:00:1f.2: reg 0x14: [io  0x30b4-0x30b7]
>[    0.321825] pci 0000:00:1f.2: reg 0x18: [io  0x30a0-0x30a7]
>[    0.321834] pci 0000:00:1f.2: reg 0x1c: [io  0x30b0-0x30b3]
>[    0.321841] pci 0000:00:1f.2: reg 0x20: [io  0x3060-0x307f]
>[    0.321849] pci 0000:00:1f.2: reg 0x24: [mem 0xc1037000-0xc10377ff]
>[    0.321889] pci 0000:00:1f.2: PME# supported from D3hot
>[    0.322119] pci 0000:00:1f.3: [8086:9ca2] type 00 class 0x0c0500
>[    0.322135] pci 0000:00:1f.3: reg 0x10: [mem 0xc1034000-0xc10340ff 64bit]
>[    0.322156] pci 0000:00:1f.3: reg 0x20: [io  0xefa0-0xefbf]
>[    0.322405] pci 0000:00:1f.6: [8086:9ca4] type 00 class 0x118000
>[    0.322434] pci 0000:00:1f.6: reg 0x10: [mem 0xc1036000-0xc1036fff 64bit]
>[    0.322747] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
>[    0.325154] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    0.325214] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    0.325271] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    0.325325] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    0.325380] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    0.325435] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    0.325490] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    0.325548] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    0.326121] ACPI: Enabled 4 GPEs in block 00 to 7F
>[    0.326355] ACPI : EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62
>[    0.326467] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
>[    0.326472] vgaarb: loaded
>[    0.326475] vgaarb: bridge control possible 0000:00:02.0
>[    0.326569] SCSI subsystem initialized
>[    0.326632] libata version 3.00 loaded.
>[    0.326681] ACPI: bus type USB registered
>[    0.326716] usbcore: registered new interface driver usbfs
>[    0.326733] usbcore: registered new interface driver hub
>[    0.326764] usbcore: registered new device driver usb
>[    0.326810] pps_core: LinuxPPS API ver. 1 registered
>[    0.326814] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
>[    0.326825] PTP clock support registered
>[    0.326910] PCI: Using ACPI for IRQ routing
>[    0.332981] PCI: pci_cache_line_size set to 64 bytes
>[    0.333013] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
>[    0.333015] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
>[    0.333017] e820: reserve RAM buffer [mem 0xa84a2000-0xabffffff]
>[    0.333019] e820: reserve RAM buffer [mem 0xab1fb000-0xabffffff]
>[    0.333021] e820: reserve RAM buffer [mem 0xab7ff000-0xabffffff]
>[    0.333023] e820: reserve RAM buffer [mem 0x14f800000-0x14fffffff]
>[    0.333168] NetLabel: Initializing
>[    0.333171] NetLabel:  domain hash size = 128
>[    0.333173] NetLabel:  protocols = UNLABELED CIPSOv4
>[    0.333189] NetLabel:  unlabeled traffic allowed by default
>[    0.333341] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
>[    0.333350] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
>[    0.335383] Switched to clocksource hpet
>[    0.339300] pnp: PnP ACPI init
>[    0.339314] ACPI: bus type PNP registered
>[    0.339637] system 00:00: [io  0x06a4] has been reserved
>[    0.339642] system 00:00: [io  0x06a0] has been reserved
>[    0.339647] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.339859] system 00:01: [io  0x0680-0x069f] has been reserved
>[    0.339863] system 00:01: [io  0xffff] has been reserved
>[    0.339866] system 00:01: [io  0xffff] has been reserved
>[    0.339870] system 00:01: [io  0xffff] has been reserved
>[    0.339873] system 00:01: [io  0x1800-0x18fe] could not be reserved
>[    0.339877] system 00:01: [io  0x164e-0x164f] has been reserved
>[    0.339881] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.339938] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
>[    0.339983] system 00:03: [io  0x1854-0x1857] has been reserved
>[    0.339988] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
>[    0.340121] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
>[    0.340256] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
>[    0.340911] system 00:06: [mem 0xfe102000-0xfe102fff] has been reserved
>[    0.340916] system 00:06: [mem 0xfe104000-0xfe104fff] has been reserved
>[    0.340919] system 00:06: [mem 0xfe106000-0xfe106fff] has been reserved
>[    0.340923] system 00:06: [mem 0xfe10e000-0xfe10efff] has been reserved
>[    0.340927] system 00:06: [mem 0xfe112000-0xfe112fff] has been reserved
>[    0.340931] system 00:06: [mem 0xfe111000-0xfe111007] has been reserved
>[    0.340934] system 00:06: [mem 0xfe111014-0xfe111fff] has been reserved
>[    0.340938] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.342229] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
>[    0.342233] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
>[    0.342237] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
>[    0.342241] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
>[    0.342247] system 00:07: [mem 0xe0000000-0xefffffff] could not be reserved
>[    0.342250] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
>[    0.342254] system 00:07: [mem 0xfed90000-0xfed93fff] has been reserved
>[    0.342258] system 00:07: [mem 0xfed45000-0xfed8ffff] could not be reserved
>[    0.342261] system 00:07: [mem 0xff000000-0xffffffff] could not be reserved
>[    0.342265] system 00:07: [mem 0xfee00000-0xfeefffff] has been reserved
>[    0.342269] system 00:07: [mem 0xaf810000-0xaf81ffff] has been reserved
>[    0.342272] system 00:07: [mem 0xaf800000-0xaf80ffff] has been reserved
>[    0.342276] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.342588] system 00:08: [mem 0x00000000-0x0009cfff] could not be reserved
>[    0.342592] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
>[    0.342738] pnp: PnP ACPI: found 9 devices
>[    0.342741] ACPI: bus type PNP unregistered
>[    0.349666] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
>[    0.349672] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
>[    0.349674] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
>[    0.349677] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
>[    0.349680] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
>[    0.349683] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
>[    0.349685] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
>[    0.349687] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
>[    0.349689] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
>[    0.349691] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
>[    0.349693] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
>[    0.349695] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff]
>[    0.349697] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff]
>[    0.349699] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff]
>[    0.349700] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff]
>[    0.349702] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff]
>[    0.349704] pci_bus 0000:00: resource 20 [mem 0xaf800000-0xfeafffff]
>[    0.349736] NET: Registered protocol family 2
>[    0.349929] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
>[    0.350018] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
>[    0.350096] TCP: Hash tables configured (established 32768 bind 32768)
>[    0.350121] TCP: reno registered
>[    0.350132] UDP hash table entries: 2048 (order: 4, 65536 bytes)
>[    0.350151] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
>[    0.350212] NET: Registered protocol family 1
>[    0.350287] RPC: Registered named UNIX socket transport module.
>[    0.350290] RPC: Registered udp transport module.
>[    0.350292] RPC: Registered tcp transport module.
>[    0.350294] RPC: Registered tcp NFSv4.1 backchannel transport module.
>[    0.350306] pci 0000:00:02.0: Boot video device
>[    0.350410] pci 0000:00:14.0: can't derive routing for PCI INT A
>[    0.350414] pci 0000:00:14.0: PCI INT A: no GSI
>[    0.350504] pci 0000:00:14.0: can't derive routing for PCI INT A
>[    0.350522] PCI: CLS 0 bytes, default 64
>[    0.872714] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>[    0.872722] software IO TLB [mem 0xa44a2000-0xa84a2000] (64MB) mapped at [ffff8800a44a2000-ffff8800a84a1fff]
>[    0.872885] Simple Boot Flag at 0x47 set to 0x1
>[    0.873833] futex hash table entries: 2048 (order: 5, 131072 bytes)
>[    0.873888] audit: initializing netlink subsys (disabled)
>[    0.873900] audit: type=2000 audit(1404071102.827:1): initialized
>[    0.874164] HugeTLB registered 2 MB page size, pre-allocated 0 pages
>[    0.876670] VFS: Disk quotas dquot_6.5.2
>[    0.876717] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>[    0.877657] NFS: Registering the id_resolver key type
>[    0.877671] Key type id_resolver registered
>[    0.877674] Key type id_legacy registered
>[    0.877682] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>[    0.877876] fuse init (API version 7.23)
>[    0.878001] msgmni has been set to 7689
>[    0.878263] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
>[    0.878271] io scheduler noop registered
>[    0.878276] io scheduler deadline registered
>[    0.878318] io scheduler cfq registered (default)
>[    0.878425] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>[    0.878500] efifb: probing for efifb
>[    0.878525] efifb: framebuffer at 0xb0000000, mapped to 0xffffc90010880000, using 8100k, total 8100k
>[    0.878530] efifb: mode is 1920x1080x32, linelength=7680, pages=2032
>[    0.878533] efifb: scrolling: redraw
>[    0.878536] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
>[    0.885260] Console: switching to colour frame buffer device 240x67
>[    0.891525] fb0: EFI VGA frame buffer device
>[    0.891661] ACPI: Fan [FAN0] (off)
>[    0.891721] ACPI: Fan [FAN1] (off)
>[    0.891780] ACPI: Fan [FAN2] (off)
>[    0.891837] ACPI: Fan [FAN3] (off)
>[    0.891896] ACPI: Fan [FAN4] (off)
>[    0.892318] Monitor-Mwait will be used to enter C-1 state
>[    0.894140] thermal LNXTHERM:00: registered as thermal_zone0
>[    0.894174] ACPI: Thermal Zone [TZ00] (45 C)
>[    0.894930] thermal LNXTHERM:01: registered as thermal_zone1
>[    0.894961] ACPI: Thermal Zone [TZ01] (45 C)
>[    0.895040] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>[    0.915713] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
>[    0.916268] Non-volatile memory driver v1.3
>[    0.916297] Linux agpgart interface v0.103
>[    0.917838] brd: module loaded
>[    0.917991] Loading iSCSI transport class v2.0-870.
>[    0.918216] iscsi: registered transport (tcp)
>[    0.918353] Adaptec aacraid driver 1.2-0[30300]-ms
>[    0.918420] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
>[    0.918572] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.07.00.08-k.
>[    0.918678] iscsi: registered transport (qla4xxx)
>[    0.918724] QLogic iSCSI HBA Driver
>[    0.918790] DC390: clustering now enabled by default. If you get problems load
>[    0.918838]        with "disable_clustering=1" and report to maintainers
>[    0.918909] GDT-HA: Storage RAID Controller Driver. Version: 3.05
>[    0.919001] RocketRAID 3xxx/4xxx Controller driver v1.8
>[    0.919054] stex: Promise SuperTrak EX Driver version: 4.6.0000.4
>[    0.919138] st: Version 20101219, fixed bufsize 32768, s/g segs 256
>[    0.919215] osst :I: Tape driver with OnStream support version 0.99.4
>[    0.919215] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
>[    0.919368] SCSI Media Changer driver v0.25 
>[    0.919438] ahci 0000:00:1f.2: version 3.0
>[    0.919566] ahci 0000:00:1f.2: irq 56 for MSI/MSI-X
>[    0.930212] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x2 impl SATA mode
>[    0.930258] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst 
>[    0.930616] scsi0 : ahci
>[    0.930733] scsi1 : ahci
>[    0.930798] ata1: DUMMY
>[    0.930815] ata2: SATA max UDMA/133 abar m2048@0xc1037000 port 0xc1037180 irq 56
>[    0.933211] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.20 (March 14, 2014)
>[    0.934639] bnx2x: Broadcom NetXtreme II 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.78.19-0 (2014/02/10)
>[    0.936151] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
>[    0.937591] e100: Copyright(c) 1999-2006 Intel Corporation
>[    0.939032] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
>[    0.940469] e1000: Copyright (c) 1999-2006 Intel Corporation.
>[    0.941927] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
>[    0.943360] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
>[    0.944941] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
>[    0.946430] e1000e 0000:00:19.0: irq 57 for MSI/MSI-X
>[    1.110586] e1000e 0000:00:19.0 eth0: registered PHC clock
>[    1.112055] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:13:20:fc:d6:b4
>[    1.113538] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
>[    1.115030] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
>[    1.116508] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.5-k
>[    1.117975] igb: Copyright (c) 2007-2014 Intel Corporation.
>[    1.119487] usbcore: registered new interface driver catc
>[    1.120989] usbcore: registered new interface driver kaweth
>[    1.122467] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
>[    1.123965] usbcore: registered new interface driver pegasus
>[    1.125465] usbcore: registered new interface driver rtl8150
>[    1.126937] usbcore: registered new interface driver asix
>[    1.128386] usbcore: registered new interface driver ax88179_178a
>[    1.129823] usbcore: registered new interface driver cdc_ether
>[    1.131251] usbcore: registered new interface driver dm9601
>[    1.132656] usbcore: registered new interface driver gl620a
>[    1.134041] usbcore: registered new interface driver net1080
>[    1.135423] usbcore: registered new interface driver plusb
>[    1.136803] usbcore: registered new interface driver rndis_host
>[    1.138191] usbcore: registered new interface driver cdc_subset
>[    1.139579] usbcore: registered new interface driver zaurus
>[    1.140969] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
>[    1.142375] usbcore: registered new interface driver cdc_ncm
>[    1.143853] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>[    1.145240] ehci-pci: EHCI PCI platform driver
>[    1.146640] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>[    1.148024] ohci-pci: OHCI PCI platform driver
>[    1.149398] uhci_hcd: USB Universal Host Controller Interface driver
>[    1.150871] xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A
>[    1.152249] xhci_hcd 0000:00:14.0: PCI INT A: no GSI
>[    1.153625] xhci_hcd 0000:00:14.0: xHCI Host Controller
>[    1.155021] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
>[    1.156484] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
>[    1.156503] xhci_hcd 0000:00:14.0: irq 58 for MSI/MSI-X
>[    1.156567] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>[    1.157943] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.159317] usb usb1: Product: xHCI Host Controller
>[    1.160666] usb usb1: Manufacturer: Linux 3.16.0-rc2_kcloud_619f97_20140701+ xhci_hcd
>[    1.162023] usb usb1: SerialNumber: 0000:00:14.0
>[    1.163497] hub 1-0:1.0: USB hub found
>[    1.164851] hub 1-0:1.0: 11 ports detected
>[    1.169785] xhci_hcd 0000:00:14.0: xHCI Host Controller
>[    1.171142] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
>[    1.172502] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
>[    1.173832] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.175160] usb usb2: Product: xHCI Host Controller
>[    1.176475] usb usb2: Manufacturer: Linux 3.16.0-rc2_kcloud_619f97_20140701+ xhci_hcd
>[    1.177811] usb usb2: SerialNumber: 0000:00:14.0
>[    1.179238] hub 2-0:1.0: USB hub found
>[    1.180552] hub 2-0:1.0: 4 ports detected
>[    1.182771] usb: failed to peer usb2-port3 and usb1-port5 by location (usb2-port3:none) (usb1-port5:usb2-port2)
>[    1.184097] usb usb2-port3: failed to peer to usb1-port5 (-16)
>[    1.185438] usb: port power management may be unreliable
>[    1.187331] usbcore: registered new interface driver usb-storage
>[    1.188732] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
>[    1.190090] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
>[    1.191910] serio: i8042 KBD port at 0x60,0x64 irq 1
>[    1.193335] mousedev: PS/2 mouse device common for all mice
>[    1.194797] rtc_cmos 00:02: RTC can wake from S4
>[    1.196290] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
>[    1.197657] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
>[    1.199012] i2c /dev entries driver
>[    1.200419] hidraw: raw HID events driver (C) Jiri Kosina
>[    1.202000] usbcore: registered new interface driver usbhid
>[    1.203325] usbhid: USB HID core driver
>[    1.204710] TCP: cubic registered
>[    1.206027] Initializing XFRM netlink socket
>[    1.207337] NET: Registered protocol family 17
>[    1.208653] Key type dns_resolver registered
>[    1.210377] registered taskstats version 1
>[    1.212119] Btrfs loaded
>[    1.213679]   Magic number: 2:432:800
>[    1.215005] acpi PNP0C09:01: hash matches
>[    1.216339] PM: Hibernation image not present or could not be loaded.
>[    1.216356] Warning: unable to open an initial console.
>[    1.232842] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
>[    1.238096] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[    1.239702] ata2.00: ATA-9: INTEL SSDSC2BB240G4, D2010370, max UDMA/133
>[    1.241064] ata2.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 31/32)
>[    1.242733] ata2.00: configured for UDMA/133
>[    1.244219] scsi 1:0:0:0: Direct-Access     ATA      INTEL SSDSC2BB24 0370 PQ: 0 ANSI: 5
>[    1.245843] sd 1:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/223 GiB)
>[    1.245846] sd 1:0:0:0: Attached scsi generic sg0 type 0
>[    1.248762] sd 1:0:0:0: [sda] 4096-byte physical blocks
>[    1.250261] sd 1:0:0:0: [sda] Write Protect is off
>[    1.251724] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[    1.251736] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    1.254640]  sda: sda1 sda2 sda3
>[    1.256401] sd 1:0:0:0: [sda] Attached SCSI disk
>[    1.262661] Freeing unused kernel memory: 23068K (ffffffff81c25000 - ffffffff832ac000)
>[    1.300578] dracut: dracut-018-35.git20120510.fc17
>[    1.331037] udevd[1411]: starting version 182
>[    1.348562] [drm] Initialized drm 1.1.0 20060810
>[    1.351790] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
>[    1.355233] ACPI: Lid Switch [LID0]
>[    1.358092] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
>[    1.360517] ACPI: Power Button [PWRB]
>[    1.362372] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
>[    1.364211] ACPI: Sleep Button [SLPB]
>[    1.364297] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
>[    1.364462] ACPI: Power Button [PWRF]
>[    1.367790] [drm:i915_dump_device_info] i915 device info: gen=8, pciid=0x1616 rev=0x07 flags=is_mobile,need_gfx_hws,has_fbc,has_hotplug,has_llc,has_ddi,has_fpga_dbg,
>[    1.367790] [drm:intel_detect_pch] This is Broadwell, assuming LynxPoint LP PCH
>[    1.367860] [drm] Memory usable by graphics device = 4096M
>[    1.367861] [drm:i915_gem_gtt_init] GMADR size = 256M
>[    1.367862] [drm:i915_gem_gtt_init] GTT stolen size = 32M
>[    1.367862] [drm:i915_gem_gtt_init] ppgtt mode: 1
>[    1.367863] [drm] Replacing VGA console driver
>[    1.379754] Console: switching to colour dummy device 80x25
>[    1.379761] checking generic (b0000000 7e9000) vs hw (b0000000 10000000)
>[    1.379764] fb: switching to inteldrmfb from EFI VGA
>[    1.380683] [drm:intel_opregion_setup] graphic opregion physical addr: 0xab795018
>[    1.380698] [drm:intel_opregion_setup] Public ACPI methods supported
>[    1.380700] [drm:intel_opregion_setup] SWSCI supported
>[    1.386038] [drm:swsci_setup] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00700483
>[    1.386040] [drm:intel_opregion_setup] ASLE supported
>[    1.386170] i915 0000:00:02.0: irq 59 for MSI/MSI-X
>[    1.386180] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
>[    1.386184] [drm] Driver supports precise vblank timestamp query.
>[    1.386188] [drm:init_vbt_defaults] Set default to SSC at 120000 kHz
>[    1.386190] [drm:validate_vbt] Using VBT from OpRegion: $VBT HASWELL        d
>[    1.386193] [drm:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0
>[    1.386195] [drm:parse_general_definitions] crt_ddc_bus_pin: 2
>[    1.386197] [drm:parse_lfp_panel_data] DRRS supported mode is seamless
>[    1.386199] [drm:parse_lfp_panel_data] Found panel mode in BIOS VBT tables:
>[    1.386203] [drm:drm_mode_debug_printmodeline] Modeline 0:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
>[    1.386205] [drm:parse_lfp_panel_data] VBT initial LVDS value 300
>[    1.386208] [drm:parse_lfp_backlight] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255
>[    1.386210] [drm:parse_sdvo_panel_data] Found SDVO panel mode in BIOS VBT tables:
>[    1.386213] [drm:drm_mode_debug_printmodeline] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
>[    1.386215] [drm:parse_sdvo_device_mapping] No SDVO device info is found in VBT
>[    1.386217] [drm:parse_driver_features] DRRS State Enabled:1
>[    1.386219] [drm:parse_ddi_port] Port A VBT info: DP:1 HDMI:0 DVI:0 EDP:1 CRT:0
>[    1.386221] [drm:parse_ddi_port] VBT HDMI level shift for port A: 0
>[    1.386223] [drm:parse_ddi_port] Port B VBT info: DP:1 HDMI:1 DVI:1 EDP:0 CRT:0
>[    1.386225] [drm:parse_ddi_port] VBT HDMI level shift for port B: 3
>[    1.386227] [drm:parse_ddi_port] Port C VBT info: DP:0 HDMI:1 DVI:1 EDP:0 CRT:0
>[    1.386229] [drm:parse_ddi_port] VBT HDMI level shift for port C: 3
>[    1.386231] [drm:parse_ddi_port] Port D VBT info: DP:1 HDMI:1 DVI:1 EDP:0 CRT:0
>[    1.386232] [drm:parse_ddi_port] VBT HDMI level shift for port D: 3
>[    1.386299] [drm:intel_dsm_pci_probe] no _DSM method for intel device
>[    1.386305] [drm:i915_gem_init_stolen] found 33554432 bytes of stolen memory at ad800000
>[    1.386307] [drm:intel_display_power_get] enabling always-on
>[    1.386309] [drm:intel_display_power_get] enabling display
>[    1.386314] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
>[    1.386419] [drm:intel_print_wm_latency] Primary WM0 latency 20 (2.0 usec)
>[    1.386421] [drm:intel_print_wm_latency] Primary WM1 latency 50 (25.0 usec)
>[    1.386423] [drm:intel_print_wm_latency] Primary WM2 latency 90 (45.0 usec)
>[    1.386425] [drm:intel_print_wm_latency] Primary WM3 latency 130 (65.0 usec)
>[    1.386426] [drm:intel_print_wm_latency] Primary WM4 latency 160 (80.0 usec)
>[    1.386428] [drm:intel_print_wm_latency] Sprite WM0 latency 20 (2.0 usec)
>[    1.386430] [drm:intel_print_wm_latency] Sprite WM1 latency 50 (25.0 usec)
>[    1.386431] [drm:intel_print_wm_latency] Sprite WM2 latency 90 (45.0 usec)
>[    1.386433] [drm:intel_print_wm_latency] Sprite WM3 latency 130 (65.0 usec)
>[    1.386435] [drm:intel_print_wm_latency] Sprite WM4 latency 160 (80.0 usec)
>[    1.386437] [drm:intel_print_wm_latency] Cursor WM0 latency 20 (2.0 usec)
>[    1.386438] [drm:intel_print_wm_latency] Cursor WM1 latency 50 (25.0 usec)
>[    1.386440] [drm:intel_print_wm_latency] Cursor WM2 latency 90 (45.0 usec)
>[    1.386441] [drm:intel_print_wm_latency] Cursor WM3 latency 130 (65.0 usec)
>[    1.386443] [drm:intel_print_wm_latency] Cursor WM4 latency 160 (80.0 usec)
>[    1.386446] [drm:intel_modeset_init] 3 display pipes available.
>[    1.386460] [drm:intel_ddi_pll_init] CDCLK running at 675000KHz
>[    1.386768] [drm:intel_dp_init_connector] Adding eDP connector on port A
>[    1.386824] [drm:intel_dp_init_panel_power_sequencer] cur t1_t3 2000 t8 0 t9 2000 t10 500 t11_t12 6000
>[    1.386827] [drm:intel_dp_init_panel_power_sequencer] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000
>[    1.386829] [drm:intel_dp_init_panel_power_sequencer] panel power up delay 200, power down delay 50, power cycle delay 600
>[    1.386831] [drm:intel_dp_init_panel_power_sequencer] backlight on delay 1, off delay 200
>[    1.386834] [drm:intel_dp_aux_init] registering DPDDC-A bus for card0-eDP-1
>[    1.386924] [drm:_edp_panel_vdd_on] Turning eDP VDD on
>[    1.386935] [drm:_edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f
>[    1.387216] [drm:intel_dp_get_dpcd] DPCD: 11 0a 02 00 00 00 00 00 00 00 00 00 00 00 00
>[    1.387393] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06
>[    1.397231] random: nonblocking pool is initialized
>[    1.410815] [drm:drm_edid_to_eld] ELD: no CEA Extension found
>[    1.410817] [drm] seamless DRRS supported for eDP panel.
>[    1.410856] [drm:intel_panel_setup_backlight] backlight initialized, enabled, brightness 937/937, sysfs interface registered
>[    1.410872] [drm:intel_dp_init_connector] Adding DP connector on port B
>[    1.410923] [drm:intel_dp_aux_init] registering DPDDC-B bus for card0-DP-1
>[    1.415035] [drm:intel_modeset_readout_hw_state] [CRTC:6] hw state readout: enabled
>[    1.415038] [drm:intel_modeset_readout_hw_state] [CRTC:10] hw state readout: disabled
>[    1.415042] [drm:intel_modeset_readout_hw_state] [CRTC:14] hw state readout: disabled
>[    1.415045] [drm:intel_ddi_get_crtc_pll] Pipe A connected to port A using clock 0x20000000
>[    1.415052] [drm:intel_ddi_get_config] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp
>[    1.415054] [drm:intel_modeset_readout_hw_state] [ENCODER:16:TMDS-16] hw state readout: enabled, pipe A
>[    1.415057] [drm:intel_modeset_readout_hw_state] [ENCODER:26:TMDS-26] hw state readout: disabled, pipe A
>[    1.415059] [drm:intel_modeset_readout_hw_state] [ENCODER:29:TMDS-29] hw state readout: disabled, pipe A
>[    1.415063] [drm:intel_modeset_readout_hw_state] [CONNECTOR:17:eDP-1] hw state readout: enabled
>[    1.415065] [drm:intel_modeset_readout_hw_state] [CONNECTOR:27:DP-1] hw state readout: disabled
>[    1.415068] [drm:intel_modeset_readout_hw_state] [CONNECTOR:28:HDMI-A-1] hw state readout: disabled
>[    1.415070] [drm:intel_modeset_readout_hw_state] [CONNECTOR:30:HDMI-A-2] hw state readout: disabled
>[    1.415074] [drm:intel_dump_pipe_config] [CRTC:6][setup_hw_state] config for pipe A
>[    1.415075] [drm:intel_dump_pipe_config] cpu_transcoder: D
>[    1.415077] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
>[    1.415079] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.415082] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64
>[    1.415083] [drm:intel_dump_pipe_config] requested mode:
>[    1.415086] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 1920 0 0 0 1080 0 0 0 0x0 0x0
>[    1.415088] [drm:intel_dump_pipe_config] adjusted mode:
>[    1.415090] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0xa
>[    1.415093] [drm:intel_dump_crtc_timings] crtc timings: 138779 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x0 flags: 0xa
>[    1.415094] [drm:intel_dump_pipe_config] port clock: 270000
>[    1.415096] [drm:intel_dump_pipe_config] pipe src size: 1920x1080
>[    1.415098] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    1.415100] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    1.415101] [drm:intel_dump_pipe_config] ips: 0
>[    1.415103] [drm:intel_dump_pipe_config] double wide: 0
>[    1.415106] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe B
>[    1.415108] [drm:i915_get_vblank_timestamp] crtc 1 is disabled
>[    1.415111] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe B
>[    1.415114] [drm:intel_dump_pipe_config] [CRTC:10][setup_hw_state] config for pipe B
>[    1.415115] [drm:intel_dump_pipe_config] cpu_transcoder: B
>[    1.415116] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
>[    1.415119] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.415121] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.415122] [drm:intel_dump_pipe_config] requested mode:
>[    1.415124] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    1.415126] [drm:intel_dump_pipe_config] adjusted mode:
>[    1.415128] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    1.415130] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[    1.415132] [drm:intel_dump_pipe_config] port clock: 0
>[    1.415133] [drm:intel_dump_pipe_config] pipe src size: 0x0
>[    1.415135] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    1.415137] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    1.415138] [drm:intel_dump_pipe_config] ips: 0
>[    1.415140] [drm:intel_dump_pipe_config] double wide: 0
>[    1.415143] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe C
>[    1.415144] [drm:i915_get_vblank_timestamp] crtc 2 is disabled
>[    1.415148] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe C
>[    1.415150] [drm:intel_dump_pipe_config] [CRTC:14][setup_hw_state] config for pipe C
>[    1.415151] [drm:intel_dump_pipe_config] cpu_transcoder: C
>[    1.415152] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
>[    1.415155] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.415156] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.415158] [drm:intel_dump_pipe_config] requested mode:
>[    1.415160] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    1.415161] [drm:intel_dump_pipe_config] adjusted mode:
>[    1.415164] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    1.415166] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[    1.415167] [drm:intel_dump_pipe_config] port clock: 0
>[    1.415169] [drm:intel_dump_pipe_config] pipe src size: 0x0
>[    1.415171] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    1.415172] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    1.415174] [drm:intel_dump_pipe_config] ips: 0
>[    1.415175] [drm:intel_dump_pipe_config] double wide: 0
>[    1.415185] [drm:intel_connector_check_state] [CONNECTOR:17:eDP-1]
>[    1.415190] [drm:check_encoder_state] [ENCODER:16:TMDS-16]
>[    1.415193] [drm:check_encoder_state] [ENCODER:26:TMDS-26]
>[    1.415195] [drm:check_encoder_state] [ENCODER:29:TMDS-29]
>[    1.415197] [drm:check_crtc_state] [CRTC:6]
>[    1.415210] [drm:check_crtc_state] [CRTC:10]
>[    1.415212] [drm:check_crtc_state] [CRTC:14]
>[    1.415219] [drm:ironlake_get_plane_config] pipe/plane 0/0 with fb: size=1920x1080@32, offset=0, pitch 7680, size 0x7e9000
>[    1.415222] [drm:i915_gem_object_create_stolen_for_preallocated] creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=7e9000
>[    1.415227] [drm:i915_pages_create_for_stolen] offset=0x0, size=8294400
>[    1.415231] [drm:intel_alloc_plane_obj] plane fb obj ffff880002c24000
>[    1.415234] [drm:i915_gem_setup_global_gtt] reserving preallocated space: 0 + 7e9000
>[    1.415236] [drm:i915_gem_setup_global_gtt] clearing unused GTT space: [7e9000, fffff000]
>[    1.418452] [drm:gen8_ppgtt_init] Allocated 4 pages for page directories (0 wasted)
>[    1.418455] [drm:gen8_ppgtt_init] Allocated 2048 pages for page tables (0 wasted)
>[    1.418458] [drm:i915_gem_context_init] HW context support initialized
>[    1.418479] [drm:init_status_page] render ring hws offset: 0x007fb000
>[    1.418561] [drm:init_pipe_control] render ring pipe control offset: 0x0081c000
>[    1.418568] [drm:init_status_page] bsd ring hws offset: 0x0081d000
>[    1.418634] [drm:init_status_page] blitter ring hws offset: 0x0083e000
>[    1.418692] [drm:init_status_page] video enhancement ring hws offset: 0x0085f000
>[    1.418957] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:17:eDP-1]
>[    1.418960] [drm:intel_dp_detect] [CONNECTOR:17:eDP-1]
>[    1.418970] [drm:drm_edid_to_eld] ELD: no CEA Extension found
>[    1.418975] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:17:eDP-1] probed modes :
>[    1.418979] [drm:drm_mode_debug_printmodeline] Modeline 18:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa
>[    1.418982] [drm:drm_mode_debug_printmodeline] Modeline 19:"1920x1080" 40 92520 1920 1966 1996 2080 1080 1082 1086 1112 0x40 0xa
>[    1.418983] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:27:DP-1]
>[    1.418985] [drm:intel_dp_detect] [CONNECTOR:27:DP-1]
>[    1.418997] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:27:DP-1] disconnected
>[    1.418999] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:28:HDMI-A-1]
>[    1.419001] [drm:intel_hdmi_detect] [CONNECTOR:28:HDMI-A-1]
>[    1.419162] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
>[    1.419164] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
>[    1.419166] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:28:HDMI-A-1] disconnected
>[    1.419168] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:30:HDMI-A-2]
>[    1.419170] [drm:intel_hdmi_detect] [CONNECTOR:30:HDMI-A-2]
>[    1.419325] [drm:gen8_irq_handler] *ERROR* The master control interrupt lied (SDE)!
>[    1.419341] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[    1.419343] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[    1.419345] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:30:HDMI-A-2] disconnected
>[    1.419346] [drm:drm_setup_crtcs] 
>[    1.419348] [drm:drm_enable_connectors] connector 17 enabled? yes
>[    1.419350] [drm:drm_enable_connectors] connector 27 enabled? no
>[    1.419351] [drm:drm_enable_connectors] connector 28 enabled? no
>[    1.419353] [drm:drm_enable_connectors] connector 30 enabled? no
>[    1.419355] [drm:intel_fb_initial_config] looking for cmdline mode on connector eDP-1
>[    1.419357] [drm:intel_fb_initial_config] looking for preferred mode on connector eDP-1
>[    1.419359] [drm:intel_fb_initial_config] connector eDP-1 on pipe A [CRTC:6]: 1920x1080
>[    1.419361] [drm:intel_fb_initial_config] connector DP-1 not enabled, skipping
>[    1.419362] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping
>[    1.419364] [drm:intel_fb_initial_config] connector HDMI-A-2 not enabled, skipping
>[    1.419366] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 6
>[    1.419368] [drm:intelfb_create] no BIOS fb, allocating a new one
>[    1.419370] [drm:i915_gem_object_create_stolen] creating stolen object: size=7e9000
>[    1.419373] [drm:i915_pages_create_for_stolen] offset=0x7e9000, size=8294400
>[    1.420304] [drm:intelfb_create] allocated 1920x1080 fb: 0x00881000, bo ffff880002c25500
>[    1.420389] fbcon: inteldrmfb (fb0) is primary device
>[    1.420441] [drm:intel_crtc_set_config] [CRTC:6] [FB:33] #connectors=1 (x y) (0 0)
>[    1.420443] [drm:intel_set_config_compute_mode_changes] modes are different, full mode set
>[    1.420447] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    1.420450] [drm:drm_mode_debug_printmodeline] Modeline 32:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa
>[    1.420451] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:6], mode_changed=1, fb_changed=1
>[    1.420453] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:eDP-1] to [CRTC:6]
>[    1.420455] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
>[    1.420457] [drm:connected_sink_compute_bpp] [CONNECTOR:17:eDP-1] checking for sink bpp constrains
>[    1.420460] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 0a pixel clock 138780KHz
>[    1.420462] [drm:intel_dp_compute_config] forcing lane count to max (2) on BDW
>[    1.420463] [drm:intel_dp_compute_config] using min 06 link bw per VBT
>[    1.420470] [drm:intel_dp_compute_config] DP link bw 0a lane count 2 clock 270000 bpp 24
>[    1.420471] [drm:intel_dp_compute_config] DP link bw required 333072 available 432000
>[    1.420473] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0
>[    1.420474] [drm:intel_dump_pipe_config] [CRTC:6][modeset] config for pipe A
>[    1.420475] [drm:intel_dump_pipe_config] cpu_transcoder: D
>[    1.420476] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
>[    1.420478] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.420479] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64
>[    1.420480] [drm:intel_dump_pipe_config] requested mode:
>[    1.420482] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa
>[    1.420483] [drm:intel_dump_pipe_config] adjusted mode:
>[    1.420484] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa
>[    1.420486] [drm:intel_dump_crtc_timings] crtc timings: 138780 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x48 flags: 0xa
>[    1.420487] [drm:intel_dump_pipe_config] port clock: 270000
>[    1.420488] [drm:intel_dump_pipe_config] pipe src size: 1920x1080
>[    1.420489] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    1.420490] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    1.420491] [drm:intel_dump_pipe_config] ips: 1
>[    1.420492] [drm:intel_dump_pipe_config] double wide: 0
>[    1.420508] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0
>[    1.420515] [drm:intel_edp_backlight_off] 
>[    1.434195] [drm:intel_edp_panel_off] Turn eDP power off
>[    1.531994] usb 1-1: new low-speed USB device number 2 using xhci_hcd
>[    1.620947] [drm:wait_panel_off] Wait for panel power off time
>[    1.620951] [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control abcd0000
>[    1.675928] [drm:wait_panel_status] Wait complete
>[    1.675932] [drm:intel_update_fbc] no output, disabling
>[    1.675936] [drm:intel_display_power_put] disabling display
>[    1.675938] [drm:hsw_set_power_well] Requesting to disable the power well
>[    1.675960] [drm:ironlake_update_primary_plane] Writing base 00881000 00000000 0 0 7680
>[    1.675968] [drm:intel_edp_panel_on] Turn eDP power on
>[    1.675971] [drm:wait_panel_power_cycle] Wait for panel power cycle
>[    1.701262] usb 1-1: New USB device found, idVendor=413c, idProduct=2107
>[    1.701264] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    1.701265] usb 1-1: Product: Dell USB Entry Keyboard
>[    1.701266] usb 1-1: Manufacturer: DELL
>[    1.701356] usb 1-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
>[    1.704314] input: DELL Dell USB Entry Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:413C:2107.0001/input/input5
>[    1.704427] hid-generic 0003:413C:2107.0001: input,hidraw0: USB HID v1.11 Keyboard [DELL Dell USB Entry Keyboard] on usb-0000:00:14.0-1/input0
>[    1.856882] usb 1-5: new low-speed USB device number 3 using xhci_hcd
>[    1.872859] tsc: Refined TSC clocksource calibration: 1795.845 MHz
>[    2.024145] usb 1-5: New USB device found, idVendor=046d, idProduct=c05a
>[    2.024147] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    2.024148] usb 1-5: Product: USB Optical Mouse
>[    2.024149] usb 1-5: Manufacturer: Logitech
>[    2.024236] usb 1-5: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
>[    2.026092] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/0003:046D:C05A.0002/input/input6
>[    2.026228] hid-generic 0003:046D:C05A.0002: input,hidraw1: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-5/input0
>[    2.178762] usb 1-6: new low-speed USB device number 4 using xhci_hcd
>[    2.221735] [drm:wait_panel_status] mask b800000f value 00000000 status 08000001 control abcd0000
>[    2.232728] [drm:wait_panel_status] Wait complete
>[    2.232732] [drm:wait_panel_on] Wait for panel power on
>[    2.232735] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd0003
>[    2.346209] usb 1-6: New USB device found, idVendor=046d, idProduct=c077
>[    2.346210] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    2.346212] usb 1-6: Product: USB Optical Mouse
>[    2.346213] usb 1-6: Manufacturer: Logitech
>[    2.346299] usb 1-6: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
>[    2.347973] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:046D:C077.0003/input/input7
>[    2.348118] hid-generic 0003:046D:C077.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-6/input0
>[    2.441652] [drm:wait_panel_status] Wait complete
>[    2.441657] [drm:_edp_panel_vdd_on] Turning eDP VDD on
>[    2.441665] [drm:_edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b
>[    2.442769] [drm:intel_dp_set_signal_levels] Using signal levels 00000000
>[    2.443246] [drm:intel_dp_start_link_train] clock recovery OK
>[    2.444022] [drm:intel_dp_complete_link_train] Channel EQ done. DP Training successful
>[    2.444316] [drm:intel_edp_backlight_on] 
>[    2.444320] [drm:intel_panel_enable_backlight] pipe A
>[    2.444326] [drm:intel_panel_actually_set_backlight] set backlight PWM = 937
>[    2.444329] [drm:intel_edp_psr_enable] PSR not supported by this panel
>[    2.479637] [drm:intel_update_fbc] disabled per chip default
>[    2.479642] [drm:intel_connector_check_state] [CONNECTOR:17:eDP-1]
>[    2.479646] [drm:check_encoder_state] [ENCODER:16:TMDS-16]
>[    2.479648] [drm:check_encoder_state] [ENCODER:26:TMDS-26]
>[    2.479650] [drm:check_encoder_state] [ENCODER:29:TMDS-29]
>[    2.479651] [drm:check_crtc_state] [CRTC:6]
>[    2.479663] [drm:check_crtc_state] [CRTC:10]
>[    2.479664] [drm:check_crtc_state] [CRTC:14]
>[    2.479667] [drm:intel_crtc_set_config] [CRTC:10] [NOFB]
>[    2.479669] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:10], mode_changed=0, fb_changed=0
>[    2.479670] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:eDP-1] to [CRTC:6]
>[    2.479672] [drm:intel_crtc_set_config] [CRTC:14] [NOFB]
>[    2.479673] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:14], mode_changed=0, fb_changed=0
>[    2.479674] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:eDP-1] to [CRTC:6]
>[    2.479680] Console: switching to colour frame buffer device 240x67
>[    2.479687] [drm:intel_crtc_set_config] [CRTC:6] [FB:33] #connectors=1 (x y) (0 0)
>[    2.479689] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:6], mode_changed=0, fb_changed=0
>[    2.479690] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:eDP-1] to [CRTC:6]
>[    2.487621] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
>[    2.487655] i915 0000:00:02.0: registered panic notifier
>[    2.494121] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
>[    2.494249] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
>[    2.494444] [drm] Initialized i915 1.6.0 20140606 for 0000:00:02.0 on minor 0
>[    2.498578] dracut: Starting plymouth daemon
>[    2.506236] [drm:intel_crtc_set_config] [CRTC:6] [FB:33] #connectors=1 (x y) (0 0)
>[    2.506239] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:6], mode_changed=0, fb_changed=0
>[    2.506241] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:eDP-1] to [CRTC:6]
>[    2.516290] [drm:i915_gem_open] 
>[    2.516320] [drm:intel_crtc_set_config] [CRTC:6] [FB:33] #connectors=1 (x y) (0 0)
>[    2.516324] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:6], mode_changed=0, fb_changed=0
>[    2.516327] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:eDP-1] to [CRTC:6]
>[    2.516329] [drm:intel_crtc_set_config] [CRTC:10] [NOFB]
>[    2.516332] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:10], mode_changed=0, fb_changed=0
>[    2.516334] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:eDP-1] to [CRTC:6]
>[    2.516335] [drm:intel_crtc_set_config] [CRTC:14] [NOFB]
>[    2.516337] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:14], mode_changed=0, fb_changed=0
>[    2.516339] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:eDP-1] to [CRTC:6]
>[    2.516349] [drm:i915_gem_open] 
>[    2.516360] [drm:intel_crtc_set_config] [CRTC:6] [FB:33] #connectors=1 (x y) (0 0)
>[    2.516363] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:6], mode_changed=0, fb_changed=0
>[    2.516364] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:eDP-1] to [CRTC:6]
>[    2.516366] [drm:intel_crtc_set_config] [CRTC:10] [NOFB]
>[    2.516368] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:10], mode_changed=0, fb_changed=0
>[    2.516370] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:eDP-1] to [CRTC:6]
>[    2.516371] [drm:intel_crtc_set_config] [CRTC:14] [NOFB]
>[    2.516373] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:14], mode_changed=0, fb_changed=0
>[    2.516375] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:eDP-1] to [CRTC:6]
>[    2.516381] [drm:i915_gem_open] 
>[    2.516649] [drm:intel_crtc_set_config] [CRTC:6] [FB:33] #connectors=1 (x y) (0 0)
>[    2.516653] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:6], mode_changed=0, fb_changed=0
>[    2.516656] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:eDP-1] to [CRTC:6]
>[    2.516659] [drm:intel_crtc_set_config] [CRTC:10] [NOFB]
>[    2.516662] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:10], mode_changed=0, fb_changed=0
>[    2.516665] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:eDP-1] to [CRTC:6]
>[    2.516667] [drm:intel_crtc_set_config] [CRTC:14] [NOFB]
>[    2.516670] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:14], mode_changed=0, fb_changed=0
>[    2.516673] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:eDP-1] to [CRTC:6]
>[    2.516840] dracut: error: unexpectedly disconnected from boot status daemon
>[    2.522501] [drm:intel_crtc_set_config] [CRTC:6] [FB:33] #connectors=1 (x y) (0 0)
>[    2.522504] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:6], mode_changed=0, fb_changed=0
>[    2.522506] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:eDP-1] to [CRTC:6]
>[    2.585887] ACPI: AC Adapter [ADP1] (on-line)
>[    2.616021] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
>[    2.616132] ACPI: Battery Slot [BAT0] (battery present)
>[    2.616262] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
>[    2.616363] ACPI: Battery Slot [BAT1] (battery absent)
>[    2.616537] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
>[    2.616641] ACPI: Battery Slot [BAT2] (battery absent)
>[    2.628030] snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002)
>[    2.631829] [drm:intel_display_power_get] enabling display
>[    2.631834] [drm:hsw_set_power_well] Enabling power well
>[    2.631874] snd_hda_intel 0000:00:03.0: irq 60 for MSI/MSI-X
>[    2.631952] i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003)
>[    2.635881] input: PC Speaker as /devices/platform/pcspkr/input/input9
>[    2.644304] ACPI Warning: SystemIO range 0x000000000000efa0-0x000000000000efbf conflicts with OpRegion 0x000000000000efa0-0x000000000000efaf (\_SB_.PCI0.SBUS.SMBI) (20140424/utaddress-258)
>[    2.649349] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[    2.668235] EXT4-fs (sda2): INFO: recovery required on readonly filesystem
>[    2.672266] EXT4-fs (sda2): write access will be enabled during recovery
>[    2.683905] iTCO_vendor_support: vendor-support=0
>[    2.686611] [drm:intel_crtc_set_config] [CRTC:6] [FB:33] #connectors=1 (x y) (0 0)
>[    2.686615] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:6], mode_changed=0, fb_changed=0
>[    2.686617] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:eDP-1] to [CRTC:6]
>[    2.686729] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
>[    2.686767] iTCO_wdt: Found a Wildcat Point_LP TCO device (Version=2, TCOBASE=0x1860)
>[    2.686907] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>[    2.694544] ppdev: user-space parallel port driver
>[    2.711945] EXT4-fs (sda2): recovery complete
>[    2.714380] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
>[    2.736833] dracut: Checking ext4: /dev/sda2
>[    2.739219] dracut: issuing e2fsck -a  /dev/sda2
>[    2.750427] dracut: /dev/sda2: clean, 822866/13598720 files, 25425368/54372608 blocks
>[    2.752554] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
>[    2.755309] dracut: Remounting /dev/sda2 with -o errors=remount-ro,ro
>[    2.768409] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: errors=remount-ro
>[    2.774254] dracut: Mounted root filesystem /dev/sda2
>[    2.787175] device-mapper: uevent: version 1.0.3
>[    2.789585] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
>[    2.820242] dracut: Switching root
>[    2.872520] Switched to clocksource tsc
>[    2.882798] init: ureadahead main process (2782) terminated with status 5
>[    2.982209] systemd-udevd[2893]: starting version 204
>[    3.141678] systemd-udevd[3549]: could not open moddep file '/lib/modules/3.16.0-rc2_kcloud_619f97_20140701+/modules.dep.bin'
>[    3.162104] [drm:intel_crtc_set_config] [CRTC:6] [FB:33] #connectors=1 (x y) (0 0)
>[    3.162108] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:6], mode_changed=0, fb_changed=0
>[    3.162111] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:eDP-1] to [CRTC:6]
>[    3.181950] [drm:intel_crtc_set_config] [CRTC:6] [FB:33] #connectors=1 (x y) (0 0)
>[    3.181954] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:6], mode_changed=0, fb_changed=0
>[    3.181957] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:eDP-1] to [CRTC:6]
>[    3.194815] [drm:intel_crtc_set_config] [CRTC:6] [FB:33] #connectors=1 (x y) (0 0)
>[    3.194819] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:6], mode_changed=0, fb_changed=0
>[    3.194822] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:eDP-1] to [CRTC:6]
>[    3.260524] [drm:intel_crtc_set_config] [CRTC:6] [FB:33] #connectors=1 (x y) (0 0)
>[    3.260528] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:6], mode_changed=0, fb_changed=0
>[    3.260530] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:eDP-1] to [CRTC:6]
>[    3.269862] Adding 16440316k swap on /dev/sda3.  Priority:-1 extents:1 across:16440316k SS
>[    3.284162] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
>[    3.307105] init: Failed to spawn ufw pre-start process: unable to execute: No such file or directory
>[    3.309246] init: Failed to spawn ufw post-stop process: unable to execute: No such file or directory
>[    3.346134] init: Failed to spawn ufw pre-start process: unable to execute: No such file or directory
>[    3.349205] init: Failed to spawn ufw post-stop process: unable to execute: No such file or directory
>[    3.368206] init: Failed to spawn ufw pre-start process: unable to execute: No such file or directory
>[    3.371830] init: Failed to spawn ufw post-stop process: unable to execute: No such file or directory
>[    3.463499] init: Failed to spawn bluetooth main process: unable to execute: No such file or directory
>[    3.552642] init: Failed to spawn ufw pre-start process: unable to execute: No such file or directory
>[    3.557481] init: Failed to spawn ufw post-stop process: unable to execute: No such file or directory
>[    3.567942] init: failsafe main process (3775) killed by TERM signal
>[    3.647890] init: avahi-cups-reload main process (3923) terminated with status 1
>[    3.740957] init: Failed to spawn hybrid-gfx main process: unable to execute: No such file or directory
>[    3.831316] e1000e 0000:00:19.0: irq 61 for MSI/MSI-X
>[    3.925574] [drm:intel_crtc_set_config] [CRTC:6] [FB:33] #connectors=1 (x y) (0 0)
>[    3.925579] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:6], mode_changed=0, fb_changed=0
>[    3.925581] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:eDP-1] to [CRTC:6]
>[    3.935314] e1000e 0000:00:19.0: irq 62 for MSI/MSI-X
>[    3.959009] init: lightdm main process (4062) terminated with status 1
>[    3.965471] init: plymouth-ready (started) main process (3639) terminated with status 1
>[    4.395945] [drm:edp_panel_vdd_off_sync] Turning eDP VDD off
>[    4.395957] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007
>[    6.664777] e1000e: eth3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
>[    8.863962] init: failsafe-x main process (4160) terminated with status 127
>[   35.566039] [drm:i915_gem_open] 
>[   35.566071] [drm:intel_crtc_set_config] [CRTC:6] [FB:33] #connectors=1 (x y) (0 0)
>[   35.566075] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:6], mode_changed=0, fb_changed=0
>[   35.566077] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:eDP-1] to [CRTC:6]
>[   35.566080] [drm:intel_crtc_set_config] [CRTC:10] [NOFB]
>[   35.566083] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:10], mode_changed=0, fb_changed=0
>[   35.566085] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:eDP-1] to [CRTC:6]
>[   35.566086] [drm:intel_crtc_set_config] [CRTC:14] [NOFB]
>[   35.566088] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:14], mode_changed=0, fb_changed=0
>[   35.566090] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:eDP-1] to [CRTC:6]
>[   35.566100] [drm:i915_gem_open] 
>[   35.566413] [drm:i915_gem_open] 
>[   35.566432] [drm:i915_gem_open] 
>[   35.566477] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[4] ENCODERS[3]
>[   35.566488] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[4] ENCODERS[3]
>[   35.566497] [drm:drm_mode_getconnector] [CONNECTOR:17:?]
>[   35.566500] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:17:eDP-1]
>[   35.566503] [drm:intel_dp_detect] [CONNECTOR:17:eDP-1]
>[   35.566513] [drm:drm_edid_to_eld] ELD: no CEA Extension found
>[   35.566518] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:17:eDP-1] probed modes :
>[   35.566521] [drm:drm_mode_debug_printmodeline] Modeline 18:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa
>[   35.566524] [drm:drm_mode_debug_printmodeline] Modeline 19:"1920x1080" 40 92520 1920 1966 1996 2080 1080 1082 1086 1112 0x40 0xa
>[   35.566527] [drm:drm_mode_getconnector] [CONNECTOR:17:?]
>[   35.566562] [drm:drm_mode_getconnector] [CONNECTOR:27:?]
>[   35.566564] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:27:DP-1]
>[   35.566566] [drm:intel_dp_detect] [CONNECTOR:27:DP-1]
>[   35.566571] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:27:DP-1] disconnected
>[   35.566574] [drm:drm_mode_getconnector] [CONNECTOR:27:?]
>[   35.566575] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:27:DP-1]
>[   35.566577] [drm:intel_dp_detect] [CONNECTOR:27:DP-1]
>[   35.566581] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:27:DP-1] disconnected
>[   35.566600] [drm:drm_mode_getconnector] [CONNECTOR:28:?]
>[   35.566602] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:28:HDMI-A-1]
>[   35.566604] [drm:intel_hdmi_detect] [CONNECTOR:28:HDMI-A-1]
>[   35.566765] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
>[   35.566768] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
>[   35.566771] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:28:HDMI-A-1] disconnected
>[   35.566775] [drm:drm_mode_getconnector] [CONNECTOR:28:?]
>[   35.566777] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:28:HDMI-A-1]
>[   35.566779] [drm:intel_hdmi_detect] [CONNECTOR:28:HDMI-A-1]
>[   35.566945] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
>[   35.566949] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
>[   35.566953] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:28:HDMI-A-1] disconnected
>[   35.566985] [drm:drm_mode_getconnector] [CONNECTOR:30:?]
>[   35.566988] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:30:HDMI-A-2]
>[   35.566990] [drm:intel_hdmi_detect] [CONNECTOR:30:HDMI-A-2]
>[   35.567158] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[   35.567161] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[   35.567164] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:30:HDMI-A-2] disconnected
>[   35.567168] [drm:drm_mode_getconnector] [CONNECTOR:30:?]
>[   35.567171] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:30:HDMI-A-2]
>[   35.567173] [drm:intel_hdmi_detect] [CONNECTOR:30:HDMI-A-2]
>[   35.567334] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[   35.567337] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[   35.567340] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:30:HDMI-A-2] disconnected
>[   35.569557] [drm:drm_mode_setcrtc] [CRTC:6]
>[   35.569561] [drm:intel_crtc_set_config] [CRTC:6] [NOFB]
>[   35.569564] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:6], mode_changed=1, fb_changed=0
>[   35.569566] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:eDP-1] to [NOCRTC]
>[   35.569568] [drm:intel_modeset_stage_output_state] encoder changed, full mode switch
>[   35.569569] [drm:intel_modeset_stage_output_state] crtc changed, full mode switch
>[   35.569571] [drm:intel_modeset_stage_output_state] crtc disabled, full mode switch
>[   35.569574] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 1
>[   35.582724] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0
>[   35.582733] [drm:intel_edp_backlight_off] 
>[   35.598716] [drm:_edp_panel_vdd_on] Turning eDP VDD on
>[   35.598725] [drm:_edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b
>[   35.598890] [drm:intel_edp_panel_off] Turn eDP power off
>[   35.783647] [drm:wait_panel_off] Wait for panel power off time
>[   35.783652] [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control abcd0000
>[   35.838623] [drm:wait_panel_status] Wait complete
>[   35.838634] [drm:intel_update_fbc] no output, disabling
>[   35.838641] [drm:intel_display_power_put] disabling always-on
>[   35.838647] [drm:check_encoder_state] [ENCODER:16:TMDS-16]
>[   35.838650] [drm:check_encoder_state] [ENCODER:26:TMDS-26]
>[   35.838652] [drm:check_encoder_state] [ENCODER:29:TMDS-29]
>[   35.838654] [drm:check_crtc_state] [CRTC:6]
>[   35.838657] [drm:check_crtc_state] [CRTC:10]
>[   35.838660] [drm:check_crtc_state] [CRTC:14]
>[   35.838667] [drm:drm_mode_setcrtc] [CRTC:10]
>[   35.838669] [drm:intel_crtc_set_config] [CRTC:10] [NOFB]
>[   35.838672] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:10], mode_changed=0, fb_changed=0
>[   35.838675] [drm:drm_mode_setcrtc] [CRTC:14]
>[   35.838676] [drm:intel_crtc_set_config] [CRTC:14] [NOFB]
>[   35.838678] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:14], mode_changed=0, fb_changed=0
>[   36.579397] [drm:intel_display_power_put] disabling display
>[   36.579401] [drm:hsw_set_power_well] Requesting to disable the power well
>[   36.579425] [drm:intel_runtime_suspend] Suspending device
>[   36.579465] [drm:hsw_enable_pc8] Enabling package C8+
>[   36.587353] [drm:intel_runtime_suspend] Device suspended
>[   62.004657] usb 1-5: USB disconnect, device number 3
>[   63.527668] usb 1-5: new low-speed USB device number 5 using xhci_hcd
>[   63.695061] usb 1-5: New USB device found, idVendor=046d, idProduct=c05a
>[   63.695065] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[   63.695067] usb 1-5: Product: USB Optical Mouse
>[   63.695069] usb 1-5: Manufacturer: Logitech
>[   63.695161] usb 1-5: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
>[   63.697071] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/0003:046D:C05A.0004/input/input10
>[   63.697214] hid-generic 0003:046D:C05A.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-5/input0
>[   63.790002] usb 1-6: USB disconnect, device number 4
>[   65.311026] usb 1-6: new low-speed USB device number 6 using xhci_hcd
>[   65.478417] usb 1-6: New USB device found, idVendor=046d, idProduct=c077
>[   65.478421] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[   65.478423] usb 1-6: Product: USB Optical Mouse
>[   65.478425] usb 1-6: Manufacturer: Logitech
>[   65.478516] usb 1-6: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
>[   65.480202] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:046D:C077.0005/input/input11
>[   65.480353] hid-generic 0003:046D:C077.0005: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-6/input0
>[  123.688384] usb 1-5: USB disconnect, device number 5
>[  125.204474] usb 1-5: new low-speed USB device number 7 using xhci_hcd
>[  125.371907] usb 1-5: New USB device found, idVendor=046d, idProduct=c05a
>[  125.371910] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[  125.371912] usb 1-5: Product: USB Optical Mouse
>[  125.371914] usb 1-5: Manufacturer: Logitech
>[  125.372004] usb 1-5: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
>[  125.373807] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/0003:046D:C05A.0006/input/input12
>[  125.373951] hid-generic 0003:046D:C05A.0006: input,hidraw1: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-5/input0
>[  125.463737] usb 1-6: USB disconnect, device number 6
>[  126.984830] usb 1-6: new low-speed USB device number 8 using xhci_hcd
>[  127.152264] usb 1-6: New USB device found, idVendor=046d, idProduct=c077
>[  127.152266] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[  127.152269] usb 1-6: Product: USB Optical Mouse
>[  127.152271] usb 1-6: Manufacturer: Logitech
>[  127.152358] usb 1-6: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
>[  127.154054] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:046D:C077.0007/input/input13
>[  127.154196] hid-generic 0003:046D:C077.0007: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-6/input0
>[  155.882253] [drm:intel_crtc_set_config] [CRTC:6] [FB:33] #connectors=1 (x y) (0 0)
>[  155.882255] [drm:intel_set_config_compute_mode_changes] inactive crtc, full mode set
>[  155.882257] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:6], mode_changed=1, fb_changed=0
>[  155.882258] [drm:intel_modeset_stage_output_state] encoder changed, full mode switch
>[  155.882259] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:eDP-1] to [CRTC:6]
>[  155.882260] [drm:intel_modeset_stage_output_state] crtc changed, full mode switch
>[  155.882261] [drm:intel_modeset_stage_output_state] crtc enabled, full mode switch
>[  155.882263] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
>[  155.882265] [drm:connected_sink_compute_bpp] [CONNECTOR:17:eDP-1] checking for sink bpp constrains
>[  155.882268] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 0a pixel clock 138780KHz
>[  155.882270] [drm:intel_dp_compute_config] forcing lane count to max (2) on BDW
>[  155.882270] [drm:intel_dp_compute_config] using min 06 link bw per VBT
>[  155.882276] [drm:intel_dp_compute_config] DP link bw 0a lane count 2 clock 270000 bpp 24
>[  155.882277] [drm:intel_dp_compute_config] DP link bw required 333072 available 432000
>[  155.882279] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0
>[  155.882280] [drm:intel_dump_pipe_config] [CRTC:6][modeset] config for pipe A
>[  155.882281] [drm:intel_dump_pipe_config] cpu_transcoder: D
>[  155.882282] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
>[  155.882284] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  155.882285] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64
>[  155.882286] [drm:intel_dump_pipe_config] requested mode:
>[  155.882289] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa
>[  155.882289] [drm:intel_dump_pipe_config] adjusted mode:
>[  155.882291] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa
>[  155.882293] [drm:intel_dump_crtc_timings] crtc timings: 138780 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x48 flags: 0xa
>[  155.882294] [drm:intel_dump_pipe_config] port clock: 270000
>[  155.882295] [drm:intel_dump_pipe_config] pipe src size: 1920x1080
>[  155.882296] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[  155.882297] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[  155.882298] [drm:intel_dump_pipe_config] ips: 1
>[  155.882299] [drm:intel_dump_pipe_config] double wide: 0
>[  155.892445] [drm:intel_runtime_resume] Resuming device
>[  155.894415] [drm:hsw_disable_pc8] Disabling package C8+
>[  155.906470] [drm:intel_runtime_resume] Device resumed
>[  155.906472] [drm:intel_display_power_get] enabling always-on
>[  155.906496] [drm:ironlake_update_primary_plane] Writing base 00881000 00000000 0 0 7680
>[  155.906506] [drm:intel_edp_panel_on] Turn eDP power on
>[  155.906509] [drm:wait_panel_power_cycle] Wait for panel power cycle
>[  155.906513] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0000
>[  155.906515] [drm:wait_panel_status] Wait complete
>[  155.906519] [drm:wait_panel_on] Wait for panel power on
>[  155.906522] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd0003
>[  156.115336] [drm:wait_panel_status] Wait complete
>[  156.115340] [drm:_edp_panel_vdd_on] Turning eDP VDD on
>[  156.115347] [drm:_edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b
>[  156.116422] [drm:intel_dp_set_signal_levels] Using signal levels 00000000
>[  156.116880] [drm:intel_dp_start_link_train] clock recovery OK
>[  156.117639] [drm:intel_dp_complete_link_train] Channel EQ done. DP Training successful
>[  156.117925] [drm:intel_edp_backlight_on] 
>[  156.117930] [drm:intel_panel_enable_backlight] pipe A
>[  156.117936] [drm:intel_panel_actually_set_backlight] set backlight PWM = 937
>[  156.117940] [drm:intel_edp_psr_enable] PSR not supported by this panel
>[  156.151325] [drm:intel_update_fbc] disabled per chip default
>[  156.151330] [drm:intel_connector_check_state] [CONNECTOR:17:eDP-1]
>[  156.151334] [drm:check_encoder_state] [ENCODER:16:TMDS-16]
>[  156.151336] [drm:check_encoder_state] [ENCODER:26:TMDS-26]
>[  156.151337] [drm:check_encoder_state] [ENCODER:29:TMDS-29]
>[  156.151339] [drm:check_crtc_state] [CRTC:6]
>[  156.151351] [drm:check_crtc_state] [CRTC:10]
>[  156.151352] [drm:check_crtc_state] [CRTC:14]
>[  156.151354] [drm:intel_crtc_set_config] [CRTC:10] [NOFB]
>[  156.151356] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:10], mode_changed=0, fb_changed=0
>[  156.151357] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:eDP-1] to [CRTC:6]
>[  156.151358] [drm:intel_crtc_set_config] [CRTC:14] [NOFB]
>[  156.151359] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:14], mode_changed=0, fb_changed=0
>[  156.151360] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:eDP-1] to [CRTC:6]
>[  156.151365] [drm:intel_crtc_set_config] [CRTC:6] [FB:33] #connectors=1 (x y) (0 0)
>[  156.151366] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:6], mode_changed=0, fb_changed=0
>[  156.151367] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:eDP-1] to [CRTC:6]
>[  156.151376] [drm:intel_crtc_set_config] [CRTC:6] [FB:33] #connectors=1 (x y) (0 0)
>[  156.151377] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:6], mode_changed=0, fb_changed=0
>[  156.151378] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:eDP-1] to [CRTC:6]
>[  156.158767] [drm:intel_crtc_set_config] [CRTC:6] [FB:33] #connectors=1 (x y) (0 0)
>[  156.158770] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:6], mode_changed=0, fb_changed=0
>[  156.158772] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:eDP-1] to [CRTC:6]
>[  156.158774] [drm:intel_crtc_set_config] [CRTC:10] [NOFB]
>[  156.158776] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:10], mode_changed=0, fb_changed=0
>[  156.158778] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:eDP-1] to [CRTC:6]
>[  156.158779] [drm:intel_crtc_set_config] [CRTC:14] [NOFB]
>[  156.158781] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:14], mode_changed=0, fb_changed=0
>[  156.158783] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:eDP-1] to [CRTC:6]
>[  157.696934] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
>[  159.124256] [drm:edp_panel_vdd_off_sync] Turning eDP VDD off
>[  159.124264] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007
>[  185.354123] usb 1-5: USB disconnect, device number 7
>[  186.870279] usb 1-5: new low-speed USB device number 9 using xhci_hcd
>[  187.037647] usb 1-5: New USB device found, idVendor=046d, idProduct=c05a
>[  187.037651] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[  187.037654] usb 1-5: Product: USB Optical Mouse
>[  187.037655] usb 1-5: Manufacturer: Logitech
>[  187.037747] usb 1-5: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
>[  187.039546] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/0003:046D:C05A.0008/input/input14
>[  187.039691] hid-generic 0003:046D:C05A.0008: input,hidraw1: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-5/input0
>[  187.145471] usb 1-6: USB disconnect, device number 8
>[  188.666632] usb 1-6: new low-speed USB device number 10 using xhci_hcd
>[  188.833997] usb 1-6: New USB device found, idVendor=046d, idProduct=c077
>[  188.834000] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[  188.834003] usb 1-6: Product: USB Optical Mouse
>[  188.834004] usb 1-6: Manufacturer: Logitech
>[  188.834090] usb 1-6: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
>[  188.835777] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:046D:C077.0009/input/input15
>[  188.835937] hid-generic 0003:046D:C077.0009: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-6/input0

Actions: View

Attachments on bug 75789: 95144 | 100073 | 102041 | 102182 | 102227

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.