Attachment 120777 Details for Bug 93567 – system information (uname -a, lspci -vv -k, packages info, xorg log)

system information (uname -a, lspci -vv -k, packages info, xorg log)

system_info.txt (text/plain), 46.66 KB, created by Hanno Meyer-Thurow on 2016-01-03 13:53:27 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Hanno Meyer-Thurow

Created: 2016-01-03 13:53:27 UTC

Size: 46.66 KB

patch

obsolete

>Linux amari 4.3.3-gentoo #3 SMP PREEMPT Sat Jan 2 12:21:06 CET 2016 x86_64 Intel(R) Core(TM) i5-2537M CPU @ 1.40GHz GenuineIntel GNU/Linux
>
>00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
>	Subsystem: Samsung Electronics Co Ltd 2nd Generation Core Processor Family DRAM Controller
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
>	Latency: 0
>	Capabilities: [e0] Vendor Specific Information: Len=0c <?>
>
>00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) (prog-if 00 [VGA controller])
>	Subsystem: Samsung Electronics Co Ltd 2nd Generation Core Processor Family Integrated Graphics Controller
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin A routed to IRQ 24
>	Region 0: Memory at c0000000 (64-bit, non-prefetchable) [size=4M]
>	Region 2: Memory at b0000000 (64-bit, prefetchable) [size=256M]
>	Region 4: I/O ports at 3000 [size=64]
>	Expansion ROM at <unassigned> [disabled]
>	Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
>		Address: fee0f00c  Data: 4161
>	Capabilities: [d0] Power Management version 2
>		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [a4] PCI Advanced Features
>		AFCap: TP+ FLR+
>		AFCtrl: FLR-
>		AFStatus: TP-
>	Kernel driver in use: i915
>
>00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
>	Subsystem: Samsung Electronics Co Ltd 6 Series/C200 Series Chipset Family MEI Controller
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin A routed to IRQ 0
>	Region 0: Memory at c0705000 (64-bit, non-prefetchable) [size=16]
>	Capabilities: [50] Power Management version 3
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [8c] MSI: Enable- Count=1/1 Maskable- 64bit+
>		Address: 0000000000000000  Data: 0000
>
>00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 04) (prog-if 20 [EHCI])
>	Subsystem: Samsung Electronics Co Ltd 6 Series/C200 Series Chipset Family USB Enhanced Host Controller
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin A routed to IRQ 16
>	Region 0: Memory at c070a000 (32-bit, non-prefetchable) [size=1K]
>	Capabilities: [50] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [58] Debug port: BAR=1 offset=00a0
>	Capabilities: [98] PCI Advanced Features
>		AFCap: TP+ FLR+
>		AFCtrl: FLR-
>		AFStatus: TP-
>	Kernel driver in use: ehci-pci
>
>00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04)
>	Subsystem: Samsung Electronics Co Ltd 6 Series/C200 Series Chipset Family High Definition Audio Controller
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0, Cache Line Size: 64 bytes
>	Interrupt: pin A routed to IRQ 33
>	Region 0: Memory at c0700000 (64-bit, non-prefetchable) [size=16K]
>	Capabilities: [50] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
>		Address: 00000000fee0f00c  Data: 4162
>	Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
>		DevCap:	MaxPayload 128 bytes, PhantFunc 0
>			ExtTag- RBE-
>		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
>			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>			MaxPayload 128 bytes, MaxReadReq 128 bytes
>		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
>	Capabilities: [100 v1] Virtual Channel
>		Caps:	LPEVC=0 RefClk=100ns PATEntryBits=1
>		Arb:	Fixed- WRR32- WRR64- WRR128-
>		Ctrl:	ArbSelect=Fixed
>		Status:	InProgress-
>		VC0:	Caps:	PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
>			Arb:	Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
>			Ctrl:	Enable+ ID=0 ArbSelect=Fixed TC/VC=01
>			Status:	NegoPending- InProgress-
>		VC1:	Caps:	PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
>			Arb:	Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
>			Ctrl:	Enable+ ID=1 ArbSelect=Fixed TC/VC=22
>			Status:	NegoPending- InProgress-
>	Capabilities: [130 v1] Root Complex Link
>		Desc:	PortNumber=0f ComponentID=00 EltType=Config
>		Link0:	Desc:	TargetPort=00 TargetComponent=00 AssocRCRB- LinkType=MemMapped LinkValid+
>			Addr:	00000000fed1c000
>	Kernel driver in use: snd_hda_intel
>
>00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b4) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0, Cache Line Size: 64 bytes
>	Interrupt: pin A routed to IRQ 16
>	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
>	Memory behind bridge: c0600000-c06fffff
>	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
>		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>	Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
>		DevCap:	MaxPayload 128 bytes, PhantFunc 0
>			ExtTag- RBE+
>		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
>			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>			MaxPayload 128 bytes, MaxReadReq 128 bytes
>		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
>		LnkCap:	Port #1, Speed 5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <512ns, L1 <16us
>			ClockPM- Surprise- LLActRep+ BwNot- ASPMOptComp-
>		LnkCtl:	ASPM L1 Enabled; RCB 64 bytes Disabled- CommClk+
>			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>		LnkSta:	Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
>		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
>			Slot #0, PowerLimit 10.000W; Interlock- NoCompl+
>		SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
>			Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
>		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
>			Changed: MRL- PresDet- LinkState+
>		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
>		RootCap: CRSVisible-
>		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
>		DevCap2: Completion Timeout: Range BC, TimeoutDis+, LTR-, OBFF Not Supported ARIFwd-
>		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
>		LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
>			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
>			 Compliance De-emphasis: -6dB
>		LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
>			 EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
>	Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
>		Address: 00000000  Data: 0000
>	Capabilities: [90] Subsystem: Samsung Electronics Co Ltd 6 Series/C200 Series Chipset Family PCI Express Root Port 1
>	Capabilities: [a0] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>	Kernel driver in use: pcieport
>
>00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b4) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0, Cache Line Size: 64 bytes
>	Interrupt: pin D routed to IRQ 19
>	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
>	I/O behind bridge: 00002000-00002fff
>	Prefetchable memory behind bridge: 00000000c0400000-00000000c04fffff
>	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
>		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>	Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
>		DevCap:	MaxPayload 128 bytes, PhantFunc 0
>			ExtTag- RBE+
>		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
>			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>			MaxPayload 128 bytes, MaxReadReq 128 bytes
>		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
>		LnkCap:	Port #4, Speed 5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <512ns, L1 <16us
>			ClockPM- Surprise- LLActRep+ BwNot- ASPMOptComp-
>		LnkCtl:	ASPM L0s L1 Enabled; RCB 64 bytes Disabled- CommClk+
>			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>		LnkSta:	Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
>		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
>			Slot #3, PowerLimit 10.000W; Interlock- NoCompl+
>		SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
>			Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
>		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
>			Changed: MRL- PresDet- LinkState+
>		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
>		RootCap: CRSVisible-
>		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
>		DevCap2: Completion Timeout: Range BC, TimeoutDis+, LTR-, OBFF Not Supported ARIFwd-
>		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
>		LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
>			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
>			 Compliance De-emphasis: -6dB
>		LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
>			 EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
>	Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
>		Address: 00000000  Data: 0000
>	Capabilities: [90] Subsystem: Samsung Electronics Co Ltd 6 Series/C200 Series Chipset Family PCI Express Root Port 4
>	Capabilities: [a0] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>	Kernel driver in use: pcieport
>
>00:1c.4 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 (rev b4) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0, Cache Line Size: 64 bytes
>	Interrupt: pin A routed to IRQ 16
>	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
>	Memory behind bridge: c0500000-c05fffff
>	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
>		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>	Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
>		DevCap:	MaxPayload 128 bytes, PhantFunc 0
>			ExtTag- RBE+
>		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
>			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>			MaxPayload 128 bytes, MaxReadReq 128 bytes
>		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
>		LnkCap:	Port #5, Speed 5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <512ns, L1 <16us
>			ClockPM- Surprise- LLActRep+ BwNot- ASPMOptComp-
>		LnkCtl:	ASPM L0s L1 Enabled; RCB 64 bytes Disabled- CommClk+
>			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>		LnkSta:	Speed 5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
>		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
>			Slot #4, PowerLimit 10.000W; Interlock- NoCompl+
>		SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
>			Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
>		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
>			Changed: MRL- PresDet- LinkState+
>		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
>		RootCap: CRSVisible-
>		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
>		DevCap2: Completion Timeout: Range BC, TimeoutDis+, LTR-, OBFF Not Supported ARIFwd-
>		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
>		LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
>			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
>			 Compliance De-emphasis: -6dB
>		LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
>			 EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
>	Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
>		Address: 00000000  Data: 0000
>	Capabilities: [90] Subsystem: Samsung Electronics Co Ltd 6 Series/C200 Series Chipset Family PCI Express Root Port 5
>	Capabilities: [a0] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>	Kernel driver in use: pcieport
>
>00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 04) (prog-if 20 [EHCI])
>	Subsystem: Samsung Electronics Co Ltd 6 Series/C200 Series Chipset Family USB Enhanced Host Controller
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin A routed to IRQ 23
>	Region 0: Memory at c0709000 (32-bit, non-prefetchable) [size=1K]
>	Capabilities: [50] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [58] Debug port: BAR=1 offset=00a0
>	Capabilities: [98] PCI Advanced Features
>		AFCap: TP+ FLR+
>		AFCtrl: FLR-
>		AFStatus: TP-
>	Kernel driver in use: ehci-pci
>
>00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 04)
>	Subsystem: Samsung Electronics Co Ltd HM65 Express Chipset Family LPC Controller
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Capabilities: [e0] Vendor Specific Information: Len=0c <?>
>	Kernel driver in use: lpc_ich
>
>00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 04) (prog-if 01 [AHCI 1.0])
>	Subsystem: Samsung Electronics Co Ltd 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
>	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin B routed to IRQ 25
>	Region 0: I/O ports at 3088 [size=8]
>	Region 1: I/O ports at 3094 [size=4]
>	Region 2: I/O ports at 3080 [size=8]
>	Region 3: I/O ports at 3090 [size=4]
>	Region 4: I/O ports at 3060 [size=32]
>	Region 5: Memory at c0708000 (32-bit, non-prefetchable) [size=2K]
>	Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
>		Address: fee0f00c  Data: 4171
>	Capabilities: [70] Power Management version 3
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
>		Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [a8] SATA HBA v1.0 BAR4 Offset=00000004
>	Capabilities: [b0] PCI Advanced Features
>		AFCap: TP+ FLR+
>		AFCtrl: FLR-
>		AFStatus: TP-
>	Kernel driver in use: ahci
>
>00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 04)
>	Subsystem: Samsung Electronics Co Ltd 6 Series/C200 Series Chipset Family SMBus Controller
>	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Interrupt: pin C routed to IRQ 0
>	Region 0: Memory at c0704000 (64-bit, non-prefetchable) [size=256]
>	Region 4: I/O ports at efa0 [size=32]
>
>01:00.0 Network controller: Intel Corporation Centrino Advanced-N 6230 [Rainbow Peak] (rev 34)
>	Subsystem: Intel Corporation Centrino Advanced-N 6230 AGN
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0, Cache Line Size: 64 bytes
>	Interrupt: pin A routed to IRQ 27
>	Region 0: Memory at c0600000 (64-bit, non-prefetchable) [size=8K]
>	Capabilities: [c8] Power Management version 3
>		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
>		Address: 00000000fee0f00c  Data: 4191
>	Capabilities: [e0] Express (v1) Endpoint, MSI 00
>		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 unlimited
>			ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset+
>		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
>			RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ FLReset-
>			MaxPayload 128 bytes, MaxReadReq 128 bytes
>		DevSta:	CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
>		LnkCap:	Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <4us, L1 <32us
>			ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp-
>		LnkCtl:	ASPM L0s L1 Enabled; RCB 64 bytes Disabled- CommClk+
>			ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
>		LnkSta:	Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
>	Capabilities: [100 v1] Advanced Error Reporting
>		UESta:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>		UEMsk:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>		UESvrt:	DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
>		CESta:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
>		CEMsk:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
>		AERCap:	First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
>	Capabilities: [140 v1] Device Serial Number 88-53-2e-ff-ff-05-ed-7b
>	Kernel driver in use: iwlwifi
>
>02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06)
>	Subsystem: Samsung Electronics Co Ltd RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0, Cache Line Size: 64 bytes
>	Interrupt: pin A routed to IRQ 26
>	Region 0: I/O ports at 2000 [size=256]
>	Region 2: Memory at c0404000 (64-bit, prefetchable) [size=4K]
>	Region 4: Memory at c0400000 (64-bit, prefetchable) [size=16K]
>	Capabilities: [40] Power Management version 3
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
>		Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
>		Address: 00000000fee0f00c  Data: 4181
>	Capabilities: [70] Express (v2) Endpoint, MSI 01
>		DevCap:	MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
>			ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
>		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
>			RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
>			MaxPayload 128 bytes, MaxReadReq 4096 bytes
>		DevSta:	CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
>		LnkCap:	Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <512ns, L1 <64us
>			ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp-
>		LnkCtl:	ASPM L0s L1 Enabled; RCB 64 bytes Disabled- CommClk+
>			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>		LnkSta:	Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
>		DevCap2: Completion Timeout: Not Supported, TimeoutDis+, LTR-, OBFF Not Supported
>		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
>		LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
>			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
>			 Compliance De-emphasis: -6dB
>		LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
>			 EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
>	Capabilities: [b0] MSI-X: Enable- Count=4 Masked-
>		Vector table: BAR=4 offset=00000000
>		PBA: BAR=4 offset=00000800
>	Capabilities: [d0] Vital Product Data
>		Unknown small resource type 00, will not decode more.
>	Capabilities: [100 v1] Advanced Error Reporting
>		UESta:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>		UEMsk:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>		UESvrt:	DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
>		CESta:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
>		CEMsk:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
>		AERCap:	First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
>	Capabilities: [140 v1] Virtual Channel
>		Caps:	LPEVC=0 RefClk=100ns PATEntryBits=1
>		Arb:	Fixed- WRR32- WRR64- WRR128-
>		Ctrl:	ArbSelect=Fixed
>		Status:	InProgress-
>		VC0:	Caps:	PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
>			Arb:	Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
>			Ctrl:	Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
>			Status:	NegoPending- InProgress-
>	Capabilities: [160 v1] Device Serial Number 01-00-00-00-68-4c-e0-00
>	Kernel driver in use: r8169
>
>03:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04) (prog-if 30 [XHCI])
>	Subsystem: Samsung Electronics Co Ltd uPD720200 USB 3.0 Host Controller
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0, Cache Line Size: 64 bytes
>	Interrupt: pin A routed to IRQ 0
>	Region 0: Memory at c0500000 (64-bit, non-prefetchable) [size=8K]
>	Capabilities: [50] Power Management version 3
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [70] MSI: Enable- Count=1/8 Maskable- 64bit+
>		Address: 0000000000000000  Data: 0000
>	Capabilities: [90] MSI-X: Enable+ Count=8 Masked-
>		Vector table: BAR=0 offset=00001000
>		PBA: BAR=0 offset=00001080
>	Capabilities: [a0] Express (v2) Endpoint, MSI 00
>		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
>			ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
>		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
>			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
>			MaxPayload 128 bytes, MaxReadReq 512 bytes
>		DevSta:	CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
>		LnkCap:	Port #0, Speed 5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <4us, L1 unlimited
>			ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp-
>		LnkCtl:	ASPM L0s L1 Enabled; RCB 64 bytes Disabled- CommClk+
>			ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
>		LnkSta:	Speed 5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
>		DevCap2: Completion Timeout: Not Supported, TimeoutDis+, LTR+, OBFF Not Supported
>		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
>		LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
>			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
>			 Compliance De-emphasis: -6dB
>		LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
>			 EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
>	Capabilities: [100 v1] Advanced Error Reporting
>		UESta:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>		UEMsk:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>		UESvrt:	DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
>		CESta:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
>		CEMsk:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
>		AERCap:	First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
>	Capabilities: [140 v1] Device Serial Number ff-ff-ff-ff-ff-ff-ff-ff
>	Capabilities: [150 v1] Latency Tolerance Reporting
>		Max snoop latency: 0ns
>		Max no snoop latency: 0ns
>	Kernel driver in use: xhci_hcd
>
>media-libs/mesa-11.1.0::gentoo  USE="dri3 egl gallium gbm llvm nptl opencl udev vaapi vdpau xa xvmc -bindist -classic -d3d9 -debug -gles1 -gles2 -openmax -osmesa -pax_kernel -pic (-selinux) -wayland" ABI_X86="32 (64) (-x32)" VIDEO_CARDS="ilo (-freedreno) -i915 -i965 -intel -nouveau -r100 -r200 -r300 -r600 -radeon -radeonsi -vmware" 0 KiB
>
>x11-libs/libva-1.6.2::gentoo  USE="X drm egl opengl vdpau -wayland" ABI_X86="32 (64) (-x32)" VIDEO_CARDS="intel nvidia -dummy -fglrx -nouveau" 0 KiB
>
>x11-base/xorg-server-1.17.4:0/1.17.4::gentoo  USE="ipv6 nptl suid udev xorg -dmx -doc -glamor -kdrive -libressl -minimal (-selinux) -static-libs -systemd -tslib -unwind -wayland -xephyr -xnest -xvfb" 0 KiB
>
>x11-drivers/xf86-video-intel-9999::x11  USE="dri sna udev uxa xvmc -debug" 0 KiB
>
>[     6.950] 
>X.Org X Server 1.17.4
>Release Date: 2015-10-28
>[     6.950] X Protocol Version 11, Revision 0
>[     6.950] Build Operating System: Linux 4.3.3-gentoo x86_64 Gentoo
>[     6.950] Current Operating System: Linux amari 4.3.3-gentoo #3 SMP PREEMPT Sat Jan 2 12:21:06 CET 2016 x86_64
>[     6.950] Kernel command line: root=/dev/sda3 rootfstype=ext4 ro quiet video=LVDS-1:1366x768-16@60 video=HDMI-A-1:1920x1080-16@50 
>[     6.950] Build Date: 02 January 2016  12:55:45PM
>[     6.950]  
>[     6.950] Current version of pixman: 0.33.6
>[     6.950] 	Before reporting problems, check http://wiki.x.org
>	to make sure that you have the latest version.
>[     6.950] Markers: (--) probed, (**) from config file, (==) default setting,
>	(++) from command line, (!!) notice, (II) informational,
>	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
>[     6.950] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Jan  3 14:17:55 2016
>[     6.958] (==) Using config directory: "/etc/X11/xorg.conf.d"
>[     6.958] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
>[     6.965] (==) No Layout section.  Using the first Screen section.
>[     6.965] (==) No screen section available. Using defaults.
>[     6.965] (**) |-->Screen "Default Screen Section" (0)
>[     6.965] (**) |   |-->Monitor "<default monitor>"
>[     6.965] (==) No device specified for screen "Default Screen Section".
>	Using the first device section listed.
>[     6.965] (**) |   |-->Device "Intel Graphics"
>[     6.965] (==) No monitor specified for screen "Default Screen Section".
>	Using a default monitor configuration.
>[     6.965] (==) Automatically adding devices
>[     6.965] (==) Automatically enabling devices
>[     6.965] (==) Automatically adding GPU devices
>[     6.967] (WW) The directory "/usr/share/fonts/misc/" does not exist.
>[     6.967] 	Entry deleted from font path.
>[     6.967] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
>[     6.967] 	Entry deleted from font path.
>[     6.967] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
>[     6.967] 	Entry deleted from font path.
>[     6.967] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
>[     6.967] 	Entry deleted from font path.
>[     6.967] (WW) The directory "/usr/share/fonts/100dpi/" does not exist.
>[     6.967] 	Entry deleted from font path.
>[     6.967] (WW) The directory "/usr/share/fonts/75dpi/" does not exist.
>[     6.967] 	Entry deleted from font path.
>[     6.967] (==) FontPath set to:
>	
>[     6.967] (**) ModulePath set to "/usr/lib64/xorg/modules"
>[     6.967] (II) The server relies on udev to provide the list of input devices.
>	If no devices become available, reconfigure udev or disable AutoAddDevices.
>[     6.967] (II) Loader magic: 0x812c60
>[     6.967] (II) Module ABI versions:
>[     6.967] 	X.Org ANSI C Emulation: 0.4
>[     6.967] 	X.Org Video Driver: 19.0
>[     6.967] 	X.Org XInput driver : 21.0
>[     6.967] 	X.Org Server Extension : 9.0
>[     6.968] (II) xfree86: Adding drm device (/dev/dri/card0)
>[     6.968] (II) xfree86: Adding drm device (/dev/dri/card1)
>[     6.970] (--) PCI:*(0:0:2:0) 8086:0116:144d:c098 rev 9, Mem @ 0xc0000000/4194304, 0xb0000000/268435456, I/O @ 0x00003000/64
>[     6.970] (II) LoadModule: "glx"
>[     6.991] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
>[     7.055] (II) Module glx: vendor="X.Org Foundation"
>[     7.055] 	compiled for 1.17.4, module version = 1.0.0
>[     7.055] 	ABI class: X.Org Server Extension, version 9.0
>[     7.055] (==) AIGLX enabled
>[     7.055] (II) LoadModule: "intel"
>[     7.070] (II) Loading /usr/lib64/xorg/modules/drivers/intel_drv.so
>[     7.077] (II) Module intel: vendor="X.Org Foundation"
>[     7.077] 	compiled for 1.17.4, module version = 2.99.917
>[     7.077] 	Module class: X.Org Video Driver
>[     7.077] 	ABI class: X.Org Video Driver, version 19.0
>[     7.077] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
>	i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
>	915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
>	Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
>	GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
>[     7.077] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
>[     7.077] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
>[     7.077] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
>[     7.077] (++) using VT number 7
>
>[     7.124] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20150731
>[     7.125] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
>[     7.126] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 3000
>[     7.126] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx; using a maximum of 2 threads
>[     7.126] (II) intel(0): Creating default Display subsection in Screen section
>	"Default Screen Section" for depth/fbbpp 24/32
>[     7.126] (==) intel(0): Depth 24, (--) framebuffer bpp 32
>[     7.126] (==) intel(0): RGB weight 888
>[     7.126] (==) intel(0): Default visual is TrueColor
>[     7.126] (**) intel(0): Option "DRI" "3"
>[     7.126] (II) intel(0): Output LVDS1 has no monitor section
>[     7.144] (--) intel(0): Found backlight control interface acpi_video0 (type 'firmware') for output LVDS1
>[     7.144] (II) intel(0): Enabled output LVDS1
>[     7.144] (II) intel(0): Output VGA1 has no monitor section
>[     7.144] (II) intel(0): Enabled output VGA1
>[     7.144] (II) intel(0): Output HDMI1 has no monitor section
>[     7.144] (II) intel(0): Enabled output HDMI1
>[     7.144] (II) intel(0): Output DP1 has no monitor section
>[     7.144] (II) intel(0): Enabled output DP1
>[     7.144] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
>[     7.144] (II) intel(0): Output VIRTUAL1 has no monitor section
>[     7.144] (II) intel(0): Enabled output VIRTUAL1
>[     7.144] (--) intel(0): Output LVDS1 using initial mode 1366x768 on pipe 0
>[     7.144] (==) intel(0): TearFree disabled
>[     7.144] (==) intel(0): DPI set to (96, 96)
>[     7.144] (II) Loading sub module "dri3"
>[     7.144] (II) LoadModule: "dri3"
>[     7.144] (II) Module "dri3" already built-in
>[     7.144] (II) Loading sub module "dri2"
>[     7.144] (II) LoadModule: "dri2"
>[     7.144] (II) Module "dri2" already built-in
>[     7.144] (II) Loading sub module "present"
>[     7.144] (II) LoadModule: "present"
>[     7.144] (II) Module "present" already built-in
>[     7.144] (==) Depth 24 pixmap format is 32 bpp
>[     7.152] (II) intel(0): SNA initialized with Sandybridge (gen6, gt2) backend
>[     7.152] (==) intel(0): Backing store enabled
>[     7.153] (==) intel(0): Silken mouse enabled
>[     7.154] (II) intel(0): HW Cursor enabled
>[     7.154] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
>[     7.155] (==) intel(0): DPMS enabled
>[     7.155] (==) intel(0): Display hotplug detection enabled
>[     7.155] (II) intel(0): [DRI2] Setup complete
>[     7.155] (II) intel(0): [DRI2]   DRI driver: i965
>[     7.155] (II) intel(0): [DRI2]   VDPAU driver: va_gl
>[     7.155] (II) intel(0): direct rendering: DRI2 DRI3 enabled
>[     7.155] (II) intel(0): hardware support for Present enabled
>[     7.155] (--) RandR disabled
>[     7.398] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
>[     7.398] (II) AIGLX: enabled GLX_ARB_create_context
>[     7.398] (II) AIGLX: enabled GLX_ARB_create_context_profile
>[     7.398] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
>[     7.398] (II) AIGLX: enabled GLX_INTEL_swap_event
>[     7.398] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
>[     7.398] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
>[     7.398] (II) AIGLX: enabled GLX_ARB_fbconfig_float
>[     7.398] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
>[     7.399] (II) AIGLX: Loaded and initialized i965
>[     7.399] (II) GLX: Initialized DRI2 GL provider for screen 0
>[     7.402] (II) intel(0): switch to mode 1366x768@60.0 on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
>[     7.402] (II) intel(0): Setting screen physical size to 361 x 203
>[     7.493] (II) config/udev: Adding input device Power Button (/dev/input/event3)
>[     7.493] (**) Power Button: Applying InputClass "evdev keyboard catchall"
>[     7.493] (**) Power Button: Applying InputClass "evdev keyboard catchall"
>[     7.493] (II) LoadModule: "evdev"
>[     7.493] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
>[     7.502] (II) Module evdev: vendor="X.Org Foundation"
>[     7.502] 	compiled for 1.17.4, module version = 2.9.2
>[     7.502] 	Module class: X.Org XInput Driver
>[     7.502] 	ABI class: X.Org XInput driver, version 21.0
>[     7.502] (II) Using input driver 'evdev' for 'Power Button'
>[     7.502] (**) Power Button: always reports core events
>[     7.502] (**) evdev: Power Button: Device: "/dev/input/event3"
>[     7.502] (--) evdev: Power Button: Vendor 0 Product 0x1
>[     7.502] (--) evdev: Power Button: Found keys
>[     7.502] (II) evdev: Power Button: Configuring as keyboard
>[     7.502] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
>[     7.502] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
>[     7.502] (**) Option "xkb_rules" "evdev"
>[     7.502] (**) Option "xkb_model" "pc105"
>[     7.502] (**) Option "xkb_layout" "de"
>[     7.532] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
>[     7.532] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
>[     7.532] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
>[     7.532] (II) Using input driver 'evdev' for 'Video Bus'
>[     7.532] (**) Video Bus: always reports core events
>[     7.532] (**) evdev: Video Bus: Device: "/dev/input/event4"
>[     7.533] (--) evdev: Video Bus: Vendor 0 Product 0x6
>[     7.533] (--) evdev: Video Bus: Found keys
>[     7.533] (II) evdev: Video Bus: Configuring as keyboard
>[     7.533] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4/event4"
>[     7.533] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
>[     7.533] (**) Option "xkb_rules" "evdev"
>[     7.533] (**) Option "xkb_model" "pc105"
>[     7.533] (**) Option "xkb_layout" "de"
>[     7.533] (II) config/udev: Adding input device Power Button (/dev/input/event1)
>[     7.533] (**) Power Button: Applying InputClass "evdev keyboard catchall"
>[     7.533] (**) Power Button: Applying InputClass "evdev keyboard catchall"
>[     7.533] (II) Using input driver 'evdev' for 'Power Button'
>[     7.533] (**) Power Button: always reports core events
>[     7.533] (**) evdev: Power Button: Device: "/dev/input/event1"
>[     7.533] (--) evdev: Power Button: Vendor 0 Product 0x1
>[     7.533] (--) evdev: Power Button: Found keys
>[     7.533] (II) evdev: Power Button: Configuring as keyboard
>[     7.533] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
>[     7.533] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
>[     7.533] (**) Option "xkb_rules" "evdev"
>[     7.533] (**) Option "xkb_model" "pc105"
>[     7.533] (**) Option "xkb_layout" "de"
>[     7.534] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
>[     7.534] (**) Lid Switch: Applying InputClass "evdev keyboard catchall"
>[     7.534] (II) Using input driver 'evdev' for 'Lid Switch'
>[     7.534] (**) Lid Switch: always reports core events
>[     7.534] (**) evdev: Lid Switch: Device: "/dev/input/event0"
>[     7.534] (--) evdev: Lid Switch: Vendor 0 Product 0x5
>[     7.534] (WW) evdev: Lid Switch: Don't know how to use device
>[     7.548] (EE) PreInit returned 8 for "Lid Switch"
>[     7.548] (II) UnloadModule: "evdev"
>[     7.548] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
>[     7.548] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
>[     7.548] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
>[     7.548] (II) Using input driver 'evdev' for 'Sleep Button'
>[     7.548] (**) Sleep Button: always reports core events
>[     7.548] (**) evdev: Sleep Button: Device: "/dev/input/event2"
>[     7.548] (--) evdev: Sleep Button: Vendor 0 Product 0x3
>[     7.548] (--) evdev: Sleep Button: Found keys
>[     7.548] (II) evdev: Sleep Button: Configuring as keyboard
>[     7.548] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2/event2"
>[     7.549] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
>[     7.549] (**) Option "xkb_rules" "evdev"
>[     7.549] (**) Option "xkb_model" "pc105"
>[     7.549] (**) Option "xkb_layout" "de"
>[     7.550] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event9)
>[     7.550] (**) HDA Intel PCH HDMI/DP,pcm=3: Applying InputClass "evdev keyboard catchall"
>[     7.550] (II) Using input driver 'evdev' for 'HDA Intel PCH HDMI/DP,pcm=3'
>[     7.550] (**) HDA Intel PCH HDMI/DP,pcm=3: always reports core events
>[     7.550] (**) evdev: HDA Intel PCH HDMI/DP,pcm=3: Device: "/dev/input/event9"
>[     7.550] (--) evdev: HDA Intel PCH HDMI/DP,pcm=3: Vendor 0 Product 0
>[     7.550] (WW) evdev: HDA Intel PCH HDMI/DP,pcm=3: Don't know how to use device
>[     7.564] (EE) PreInit returned 8 for "HDA Intel PCH HDMI/DP,pcm=3"
>[     7.564] (II) UnloadModule: "evdev"
>[     7.564] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event7)
>[     7.564] (**) HDA Intel PCH Mic: Applying InputClass "evdev keyboard catchall"
>[     7.564] (II) Using input driver 'evdev' for 'HDA Intel PCH Mic'
>[     7.564] (**) HDA Intel PCH Mic: always reports core events
>[     7.564] (**) evdev: HDA Intel PCH Mic: Device: "/dev/input/event7"
>[     7.564] (--) evdev: HDA Intel PCH Mic: Vendor 0 Product 0
>[     7.564] (WW) evdev: HDA Intel PCH Mic: Don't know how to use device
>[     7.576] (EE) PreInit returned 8 for "HDA Intel PCH Mic"
>[     7.576] (II) UnloadModule: "evdev"
>[     7.576] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event8)
>[     7.576] (**) HDA Intel PCH Headphone: Applying InputClass "evdev keyboard catchall"
>[     7.576] (II) Using input driver 'evdev' for 'HDA Intel PCH Headphone'
>[     7.576] (**) HDA Intel PCH Headphone: always reports core events
>[     7.576] (**) evdev: HDA Intel PCH Headphone: Device: "/dev/input/event8"
>[     7.576] (--) evdev: HDA Intel PCH Headphone: Vendor 0 Product 0
>[     7.576] (WW) evdev: HDA Intel PCH Headphone: Don't know how to use device
>[     7.588] (EE) PreInit returned 8 for "HDA Intel PCH Headphone"
>[     7.588] (II) UnloadModule: "evdev"
>[     7.588] (II) config/udev: Adding input device Logitech M525 (/dev/input/event11)
>[     7.588] (**) Logitech M525: Applying InputClass "evdev pointer catchall"
>[     7.588] (**) Logitech M525: Applying InputClass "evdev keyboard catchall"
>[     7.588] (II) Using input driver 'evdev' for 'Logitech M525'
>[     7.588] (**) Logitech M525: always reports core events
>[     7.588] (**) evdev: Logitech M525: Device: "/dev/input/event11"
>[     7.588] (--) evdev: Logitech M525: Vendor 0x46d Product 0x4013
>[     7.588] (--) evdev: Logitech M525: Found 20 mouse buttons
>[     7.588] (--) evdev: Logitech M525: Found scroll wheel(s)
>[     7.588] (--) evdev: Logitech M525: Found relative axes
>[     7.588] (--) evdev: Logitech M525: Found x and y relative axes
>[     7.588] (II) evdev: Logitech M525: Configuring as mouse
>[     7.588] (II) evdev: Logitech M525: Adding scrollwheel support
>[     7.588] (**) evdev: Logitech M525: YAxisMapping: buttons 4 and 5
>[     7.588] (**) evdev: Logitech M525: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
>[     7.588] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.2/4-1.2:1.2/0003:046D:C52B.0003/0003:046D:4013.0004/input/input12/event11"
>[     7.588] (II) XINPUT: Adding extended input device "Logitech M525" (type: MOUSE, id 10)
>[     7.588] (II) evdev: Logitech M525: initialized for relative axes.
>[     7.589] (**) Logitech M525: (accel) keeping acceleration scheme 1
>[     7.589] (**) Logitech M525: (accel) acceleration profile 0
>[     7.589] (**) Logitech M525: (accel) acceleration factor: 2.000
>[     7.589] (**) Logitech M525: (accel) acceleration threshold: 4
>[     7.589] (II) config/udev: Adding input device Logitech M525 (/dev/input/mouse1)
>[     7.589] (**) Logitech M525: Applying InputClass "evdev keyboard catchall"
>[     7.589] (II) Using input driver 'evdev' for 'Logitech M525'
>[     7.589] (**) Logitech M525: always reports core events
>[     7.589] (**) evdev: Logitech M525: Device: "/dev/input/mouse1"
>[     7.589] (EE) evdev: Logitech M525: Unable to query fd: Inappropriate ioctl for device
>[     7.604] (EE) PreInit returned 2 for "Logitech M525"
>[     7.604] (II) UnloadModule: "evdev"
>[     7.604] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event6)
>[     7.604] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
>[     7.604] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
>[     7.604] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
>[     7.604] (**) AT Translated Set 2 keyboard: always reports core events
>[     7.604] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event6"
>[     7.604] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
>[     7.604] (--) evdev: AT Translated Set 2 keyboard: Found keys
>[     7.604] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
>[     7.604] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input5/event6"
>[     7.604] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
>[     7.604] (**) Option "xkb_rules" "evdev"
>[     7.604] (**) Option "xkb_model" "pc105"
>[     7.604] (**) Option "xkb_layout" "de"
>[     7.605] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event10)
>[     7.605] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
>[     7.605] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
>[     7.605] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
>[     7.605] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev keyboard catchall"
>[     7.605] (II) Using input driver 'evdev' for 'SynPS/2 Synaptics TouchPad'
>[     7.605] (**) SynPS/2 Synaptics TouchPad: always reports core events
>[     7.605] (**) evdev: SynPS/2 Synaptics TouchPad: Device: "/dev/input/event10"
>[     7.605] (--) evdev: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
>[     7.605] (--) evdev: SynPS/2 Synaptics TouchPad: Found 1 mouse buttons
>[     7.605] (--) evdev: SynPS/2 Synaptics TouchPad: Found absolute axes
>[     7.605] (--) evdev: SynPS/2 Synaptics TouchPad: Found absolute multitouch axes
>[     7.605] (--) evdev: SynPS/2 Synaptics TouchPad: Found x and y absolute axes
>[     7.605] (--) evdev: SynPS/2 Synaptics TouchPad: Found absolute touchpad.
>[     7.605] (II) evdev: SynPS/2 Synaptics TouchPad: Configuring as touchpad
>[     7.605] (**) evdev: SynPS/2 Synaptics TouchPad: YAxisMapping: buttons 4 and 5
>[     7.605] (**) evdev: SynPS/2 Synaptics TouchPad: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
>[     7.605] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input11/event10"
>[     7.605] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 12)
>[     7.606] (II) evdev: SynPS/2 Synaptics TouchPad: initialized for absolute axes.
>[     7.606] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
>[     7.606] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0
>[     7.606] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
>[     7.606] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
>[     7.606] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
>[     7.606] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
>[     7.606] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
>[     7.606] (**) PC Speaker: Applying InputClass "evdev keyboard catchall"
>[     7.607] (II) Using input driver 'evdev' for 'PC Speaker'
>[     7.607] (**) PC Speaker: always reports core events
>[     7.607] (**) evdev: PC Speaker: Device: "/dev/input/event5"
>[     7.607] (--) evdev: PC Speaker: Vendor 0x1f Product 0x1
>[     7.607] (WW) evdev: PC Speaker: Don't know how to use device
>[     7.636] (EE) PreInit returned 8 for "PC Speaker"
>[     7.636] (II) UnloadModule: "evdev"
>[     9.144] (II) intel(0): EDID vendor "SEC", prod id 13126
>[     9.144] (II) intel(0): Printing DDC gathered Modelines:
>[     9.144] (II) intel(0): Modeline "1366x768"x0.0   70.70  1366 1414 1446 1486  768 770 775 792 -hsync -vsync (47.6 kHz eP)

Actions: View

Attachments on bug 93567: 120777 | 120778 | 120783 | 120824 | 122435 | 122436 | 122437

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.