Attachment 121444 Details for Bug 93950 – drm.debug=14

drm.debug=14

debug.cgi (text/plain), 41.94 KB, created by Artem S. Tashkinov on 2016-02-01 18:22:03 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Artem S. Tashkinov

Created: 2016-02-01 18:22:03 UTC

Size: 41.94 KB

patch

obsolete

>[    1.214077] [drm] Initialized drm 1.1.0 20060810
>[    1.312324] [drm:i915_dump_device_info] i915 device info: gen=9, pciid=0x1916 rev=0x07 flags=need_gfx_hws,is_skylake,has_fbc,has_hotplug,has_llc,has_ddi,has_fpga_dbg,
>[    1.312343] [drm:intel_detect_pch] Found SunrisePoint LP PCH
>[    1.312587] [drm:intel_csr_ucode_init] Loading i915/skl_dmc_ver1.bin
>[    1.312651] [drm:finish_csr_load] Finished loading i915/skl_dmc_ver1.bin
>[    1.312708] [drm] Memory usable by graphics device = 4096M
>[    1.312710] [drm:i915_gem_gtt_init] GMADR size = 256M
>[    1.312711] [drm:i915_gem_gtt_init] GTT stolen size = 32M
>[    1.312713] [drm:i915_gem_gtt_init] ppgtt mode: 2
>[    1.312716] fb: switching to inteldrmfb from EFI VGA
>[    1.312879] [drm] Replacing VGA console driver
>[    1.313604] [drm:intel_opregion_setup] graphic opregion physical addr: 0x87eed018
>[    1.313613] [drm:intel_opregion_setup] Public ACPI methods supported
>[    1.313614] [drm:intel_opregion_setup] SWSCI supported
>[    1.319552] [drm:swsci_setup] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483
>[    1.319554] [drm:intel_opregion_setup] ASLE supported
>[    1.320031] [drm:intel_device_info_runtime_init] slice total: 1
>[    1.320033] [drm:intel_device_info_runtime_init] subslice total: 3
>[    1.320035] [drm:intel_device_info_runtime_init] subslice per slice: 3
>[    1.320036] [drm:intel_device_info_runtime_init] EU total: 24
>[    1.320037] [drm:intel_device_info_runtime_init] EU per subslice: 8
>[    1.320039] [drm:intel_device_info_runtime_init] has slice power gating: n
>[    1.320040] [drm:intel_device_info_runtime_init] has subslice power gating: n
>[    1.320042] [drm:intel_device_info_runtime_init] has EU power gating: y
>[    1.320043] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
>[    1.320044] [drm] Driver supports precise vblank timestamp query.
>[    1.320046] [drm:sanitize_disable_power_well_option] Disabling display power well support
>[    1.320048] [drm:init_vbt_defaults] Set default to SSC at 120000 kHz
>[    1.320050] [drm:validate_vbt] Using VBT from OpRegion: $VBT SKYLAKE        d
>[    1.320052] [drm:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0
>[    1.320054] [drm:parse_general_definitions] crt_ddc_bus_pin: 2
>[    1.320056] [drm:parse_lfp_panel_data] DRRS supported mode is static
>[    1.320058] [drm:parse_lfp_panel_data] Found panel mode in BIOS VBT tables:
>[    1.320061] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 0 142900 1920 1968 2000 2082 1080 1082 1087 1144 0x8 0xa
>[    1.320063] [drm:parse_lfp_panel_data] VBT initial LVDS value 30033c
>[    1.320065] [drm:parse_lfp_backlight] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255
>[    1.320066] [drm:parse_sdvo_device_mapping] Unsupported child device size for SDVO mapping.
>[    1.320068] [drm:parse_driver_features] DRRS State Enabled:0
>[    1.320071] [drm:parse_ddi_port] Port A VBT info: DP:1 HDMI:0 DVI:0 EDP:1 CRT:0
>[    1.320072] [drm:parse_ddi_port] VBT HDMI level shift for port A: 0
>[    1.320074] [drm:parse_ddi_port] Port B VBT info: DP:0 HDMI:1 DVI:1 EDP:0 CRT:0
>[    1.320075] [drm:parse_ddi_port] VBT HDMI level shift for port B: 4
>[    1.320101] [drm:intel_dsm_pci_probe] no _DSM method for intel device
>[    1.320107] [drm:i915_gem_init_stolen] Memory reserved for graphics device: 32768K, usable: 31744K
>[    1.320109] [drm:intel_power_well_enable] enabling always-on
>[    1.320111] [drm:intel_power_well_enable] enabling power well 1
>[    1.320114] [drm:intel_power_well_enable] enabling MISC IO power well
>[    1.320116] [drm:intel_power_well_enable] enabling power well 2
>[    1.320118] [drm:skl_disable_dc6] Disabling DC6
>[    1.320121] [drm:intel_power_well_enable] enabling DDI A/E power well
>[    1.320123] [drm:intel_power_well_enable] enabling DDI B power well
>[    1.320125] [drm:skl_set_power_well] Enabling DDI B power well
>[    1.320127] [drm:intel_power_well_enable] enabling DDI C power well
>[    1.320129] [drm:skl_set_power_well] Enabling DDI C power well
>[    1.320130] [drm:intel_power_well_enable] enabling DDI D power well
>[    1.320132] [drm:skl_set_power_well] Enabling DDI D power well
>[    1.322354] [drm:intel_print_wm_latency] Gen9 Plane WM0 latency 2 (2.0 usec)
>[    1.322357] [drm:intel_print_wm_latency] Gen9 Plane WM1 latency 19 (19.0 usec)
>[    1.322358] [drm:intel_print_wm_latency] Gen9 Plane WM2 latency 28 (28.0 usec)
>[    1.322360] [drm:intel_print_wm_latency] Gen9 Plane WM3 latency 32 (32.0 usec)
>[    1.322362] [drm:intel_print_wm_latency] Gen9 Plane WM4 latency 63 (63.0 usec)
>[    1.322363] [drm:intel_print_wm_latency] Gen9 Plane WM5 latency 77 (77.0 usec)
>[    1.322365] [drm:intel_print_wm_latency] Gen9 Plane WM6 latency 83 (83.0 usec)
>[    1.322367] [drm:intel_print_wm_latency] Gen9 Plane WM7 latency 99 (99.0 usec)
>[    1.322369] [drm:intel_modeset_init] 3 display pipes available.
>[    1.322390] [drm:intel_update_cdclk] Current CD clock rate: 337500 kHz
>[    1.322394] [drm:intel_update_max_cdclk] Max CD clock rate: 675000 kHz
>[    1.322395] [drm:intel_update_max_cdclk] Max dotclock rate: 675000 kHz
>[    1.322734] [drm:intel_dp_init_connector] Adding eDP connector on port A
>[    1.322845] [drm:intel_dp_init_panel_power_sequencer] cur t1_t3 0 t8 0 t9 0 t10 500 t11_t12 6000
>[    1.322847] [drm:intel_dp_init_panel_power_sequencer] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000
>[    1.322849] [drm:intel_dp_init_panel_power_sequencer] panel power up delay 200, power down delay 50, power cycle delay 600
>[    1.322851] [drm:intel_dp_init_panel_power_sequencer] backlight on delay 1, off delay 200
>[    1.322853] [drm:intel_dp_aux_init] registering DPDDC-A bus for card0-eDP-1
>[    1.322904] [drm:edp_panel_vdd_on] Turning eDP port A VDD on
>[    1.322981] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f
>[    1.323698] [drm:intel_dp_get_dpcd] DPCD: 12 0a c2 41 00 00 01 c0 02 00 00 00 1f 0a 00
>[    1.324091] [drm:intel_dp_get_dpcd] Display Port TPS3 support: source yes, sink yes
>[    1.324501] [drm:intel_dp_print_rates] source rates: 162000, 216000, 270000, 324000, 432000, 540000
>[    1.324502] [drm:intel_dp_print_rates] sink rates: 162000, 270000
>[    1.324504] [drm:intel_dp_print_rates] common rates: 162000, 270000
>[    1.324589] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06
>[    1.326657] [drm:drm_dp_i2c_do_msg] native defer
>[    1.328023] [drm:drm_dp_i2c_do_msg] native defer
>[    1.329416] [drm:drm_dp_i2c_do_msg] native defer
>[    1.330920] [drm:drm_dp_i2c_do_msg] native defer
>[    1.332314] [drm:drm_dp_i2c_do_msg] native defer
>[    1.333809] [drm:drm_dp_i2c_do_msg] native defer
>[    1.335301] [drm:drm_dp_i2c_do_msg] native defer
>[    1.336787] [drm:drm_dp_i2c_do_msg] native defer
>[    1.338044] [drm:drm_edid_to_eld] ELD: no CEA Extension found
>[    1.338052] [drm:intel_dp_drrs_init] VBT doesn't support DRRS
>[    1.338113] [drm:intel_panel_setup_backlight] Connector eDP-1 backlight initialized, enabled, brightness 937/937
>[    1.338189] [drm:intel_modeset_readout_hw_state] [CRTC:21] hw state readout: enabled
>[    1.338191] [drm:intel_modeset_readout_hw_state] [CRTC:25] hw state readout: disabled
>[    1.338193] [drm:intel_modeset_readout_hw_state] [CRTC:29] hw state readout: disabled
>[    1.338195] [drm:intel_modeset_readout_hw_state] DPLL 1 hw state readout: crtc_mask 0x00000000, on 0
>[    1.338196] [drm:intel_modeset_readout_hw_state] DPLL 2 hw state readout: crtc_mask 0x00000000, on 0
>[    1.338219] [drm:intel_modeset_readout_hw_state] DPLL 3 hw state readout: crtc_mask 0x00000000, on 0
>[    1.338227] [drm:intel_modeset_readout_hw_state] [ENCODER:31:TMDS-31] hw state readout: enabled, pipe A
>[    1.338231] [drm:intel_modeset_readout_hw_state] [ENCODER:40:TMDS-40] hw state readout: disabled, pipe A
>[    1.338238] [drm:intel_modeset_readout_hw_state] [CONNECTOR:32:eDP-1] hw state readout: enabled
>[    1.338240] [drm:intel_modeset_readout_hw_state] [CONNECTOR:41:HDMI-A-1] hw state readout: disabled
>[    1.338297] [drm:skl_wm_flush_pipe] flush pipe A (pass 3)
>[    1.338300] [drm:intel_dump_pipe_config] [CRTC:21][setup_hw_state] config ffff8800867d2400 for pipe A
>[    1.338301] [drm:intel_dump_pipe_config] cpu_transcoder: D
>[    1.338302] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
>[    1.338303] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.338304] [drm:intel_dump_pipe_config] dp: 1, lanes: 2, gmch_m: 6659622, gmch_n: 8388608, link_m: 277484, link_n: 524288, tu: 64
>[    1.338305] [drm:intel_dump_pipe_config] dp: 1, lanes: 2, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[    1.338306] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
>[    1.338307] [drm:intel_dump_pipe_config] requested mode:
>[    1.338309] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 142899 1920 1968 2000 2082 1080 1082 1087 1144 0x40 0xa
>[    1.338310] [drm:intel_dump_pipe_config] adjusted mode:
>[    1.338311] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 142899 1920 1968 2000 2082 1080 1082 1087 1144 0x40 0xa
>[    1.338312] [drm:intel_dump_crtc_timings] crtc timings: 142899 1920 1968 2000 2082 1080 1082 1087 1144, type: 0x40 flags: 0xa
>[    1.338313] [drm:intel_dump_pipe_config] port clock: 270000
>[    1.338314] [drm:intel_dump_pipe_config] pipe src size: 1920x1080
>[    1.338315] [drm:intel_dump_pipe_config] num_scalers: 2, scaler_users: 0x80000000, scaler_id: 0
>[    1.338316] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    1.338317] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x07800438, enabled
>[    1.338318] [drm:intel_dump_pipe_config] ips: 0
>[    1.338318] [drm:intel_dump_pipe_config] double wide: 0
>[    1.338319] [drm:intel_dump_pipe_config] ddi_pll_sel: 0; dpll_hw_state: ctrl1: 0x3, cfgcr1: 0x0, cfgcr2: 0x0
>[    1.338320] [drm:intel_dump_pipe_config] planes on this crtc
>[    1.338321] [drm:intel_dump_pipe_config] STANDARD PLANE:18 plane: 0.0 idx: 0 disabled, scaler_id = -1
>[    1.338323] [drm:intel_dump_pipe_config] CURSOR PLANE:20 plane: 0.1 idx: 1 disabled, scaler_id = -1
>[    1.338324] [drm:intel_dump_pipe_config] STANDARD PLANE:22 plane: 0.1 idx: 2 disabled, scaler_id = -1
>[    1.338334] [drm:intel_dump_pipe_config] [CRTC:25][setup_hw_state] config ffff8800867d3400 for pipe B
>[    1.338335] [drm:intel_dump_pipe_config] cpu_transcoder: B
>[    1.338335] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
>[    1.338337] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.338338] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.338339] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[    1.338339] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
>[    1.338340] [drm:intel_dump_pipe_config] requested mode:
>[    1.338341] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    1.338342] [drm:intel_dump_pipe_config] adjusted mode:
>[    1.338343] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    1.338345] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[    1.338345] [drm:intel_dump_pipe_config] port clock: 0
>[    1.338346] [drm:intel_dump_pipe_config] pipe src size: 0x0
>[    1.338347] [drm:intel_dump_pipe_config] num_scalers: 2, scaler_users: 0x0, scaler_id: 0
>[    1.338348] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    1.338349] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    1.338350] [drm:intel_dump_pipe_config] ips: 0
>[    1.338351] [drm:intel_dump_pipe_config] double wide: 0
>[    1.338352] [drm:intel_dump_pipe_config] ddi_pll_sel: 0; dpll_hw_state: ctrl1: 0x0, cfgcr1: 0x0, cfgcr2: 0x0
>[    1.338352] [drm:intel_dump_pipe_config] planes on this crtc
>[    1.338353] [drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 1.0 idx: 3 disabled, scaler_id = -1
>[    1.338354] [drm:intel_dump_pipe_config] CURSOR PLANE:24 plane: 1.2 idx: 4 disabled, scaler_id = -1
>[    1.338355] [drm:intel_dump_pipe_config] STANDARD PLANE:26 plane: 1.1 idx: 5 disabled, scaler_id = -1
>[    1.338357] [drm:intel_dump_pipe_config] [CRTC:29][setup_hw_state] config ffff8800867d4400 for pipe C
>[    1.338358] [drm:intel_dump_pipe_config] cpu_transcoder: C
>[    1.338359] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
>[    1.338360] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.338361] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.338362] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[    1.338362] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
>[    1.338363] [drm:intel_dump_pipe_config] requested mode:
>[    1.338364] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    1.338365] [drm:intel_dump_pipe_config] adjusted mode:
>[    1.338366] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    1.338368] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[    1.338368] [drm:intel_dump_pipe_config] port clock: 0
>[    1.338369] [drm:intel_dump_pipe_config] pipe src size: 0x0
>[    1.338370] [drm:intel_dump_pipe_config] num_scalers: 1, scaler_users: 0x0, scaler_id: 0
>[    1.338371] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    1.338372] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    1.338372] [drm:intel_dump_pipe_config] ips: 0
>[    1.338373] [drm:intel_dump_pipe_config] double wide: 0
>[    1.338374] [drm:intel_dump_pipe_config] ddi_pll_sel: 0; dpll_hw_state: ctrl1: 0x0, cfgcr1: 0x0, cfgcr2: 0x0
>[    1.338375] [drm:intel_dump_pipe_config] planes on this crtc
>[    1.338376] [drm:intel_dump_pipe_config] STANDARD PLANE:27 plane: 2.0 idx: 6 disabled, scaler_id = -1
>[    1.338377] [drm:intel_dump_pipe_config] CURSOR PLANE:28 plane: 2.3 idx: 7 disabled, scaler_id = -1
>[    1.338378] [drm:intel_dump_pipe_config] STANDARD PLANE:30 plane: 2.1 idx: 8 disabled, scaler_id = -1
>[    1.338438] [drm:skylake_get_initial_plane_config] pipe A with fb: size=1920x1080@32, offset=0, pitch 7680, size 0x7e9000
>[    1.338475] [drm:i915_gem_object_create_stolen_for_preallocated] creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=7e9000
>[    1.338495] [drm:i915_pages_create_for_stolen] offset=0x0, size=8294400
>[    1.338499] [drm:intel_alloc_initial_plane_obj] initial plane fb obj ffff8800867c8000
>[    1.338500] [drm:intel_guc_ucode_init] GuC firmware pending, path i915/skl_guc_ver4.bin
>[    1.338501] [drm:guc_fw_fetch] before requesting firmware: GuC fw fetch status PENDING
>[    1.338550] [drm:guc_fw_fetch] fetch GuC fw from i915/skl_guc_ver4.bin succeeded, fw ffff880266d90340
>[    1.338551] [drm:guc_fw_fetch] firmware file size 128320 (minimum 384, maximum 491776)
>[    1.338552] [drm:guc_fw_fetch] firmware version 4.3 OK (minimum 4.3)
>[    1.338603] [drm:guc_fw_fetch] GuC fw fetch status SUCCESS, obj ffff8800867c8240
>[    1.338834] [drm:i915_gem_setup_global_gtt] reserving preallocated space: 0 + 7e9000
>[    1.338835] [drm:i915_gem_setup_global_gtt] clearing unused GTT space: [7e9000, fffff000]
>[    1.340365] [drm:i915_gem_context_init] LR context support initialized
>[    1.340375] [drm:intel_init_pipe_control] render ring pipe control offset: 0x007e9000
>[    1.340542] [drm:gen8_init_common_ring] Execlists enabled for render ring
>[    1.340578] [drm:gen8_init_common_ring] Execlists enabled for bsd ring
>[    1.340600] [drm:gen8_init_common_ring] Execlists enabled for blitter ring
>[    1.340614] [drm:gen8_init_common_ring] Execlists enabled for video enhancement ring
>[    1.340616] [drm:intel_guc_ucode_load] GuC fw status: fetch SUCCESS, load NONE
>[    1.340636] [drm:intel_guc_ucode_load] GuC fw fetch status SUCCESS
>[    1.350163] [drm:guc_ucode_xfer_dma] DMA status 0x10, GuC status 0x8000f0ec
>[    1.350164] [drm:guc_ucode_xfer_dma] returning 0
>[    1.350165] [drm:intel_guc_ucode_load] GuC fw status: fetch SUCCESS, load SUCCESS
>[    1.350203] [drm:intel_update_cdclk] Current CD clock rate: 337500 kHz
>[    1.350298] [drm:intel_backlight_device_register] Connector eDP-1 backlight sysfs interface registered
>[    1.350300] [drm:intel_fbdev_init_bios] found possible fb from plane A
>[    1.350301] [drm:intel_fbdev_init_bios] pipe B not active or no fb, skipping
>[    1.350302] [drm:intel_fbdev_init_bios] pipe C not active or no fb, skipping
>[    1.350303] [drm:intel_fbdev_init_bios] checking plane A for BIOS fb
>[    1.350304] [drm:intel_fbdev_init_bios] pipe A area: 1920x1080, bpp: 32, size: 8294400
>[    1.350305] [drm:intel_fbdev_init_bios] fb big enough for plane A (8294400 >= 8294400)
>[    1.350306] [drm:intel_fbdev_init_bios] pipe B not active, skipping
>[    1.350306] [drm:intel_fbdev_init_bios] pipe C not active, skipping
>[    1.350330] [drm:intel_fbdev_init_bios] using BIOS fb for initial console
>[    1.350509] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:32:eDP-1]
>[    1.350511] [drm:intel_dp_detect] [CONNECTOR:32:eDP-1]
>[    1.350895] [drm:intel_dp_probe_oui] Sink OUI: 0022b9
>[    1.351304] [drm:intel_dp_probe_oui] Branch OUI: 444617
>[    1.351696] [drm:intel_didl_outputs] More than 15 outputs detected via ACPI
>[    1.352000] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:32:eDP-1] status updated from 3 to 1
>[    1.352033] [drm:drm_edid_to_eld] ELD: no CEA Extension found
>[    1.352039] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:32:eDP-1] probed modes :
>[    1.352041] [drm:drm_mode_debug_printmodeline] Modeline 33:"1920x1080" 60 142900 1920 1968 2000 2082 1080 1082 1087 1144 0x48 0xa
>[    1.352043] [drm:drm_mode_debug_printmodeline] Modeline 34:"1920x1080" 40 95270 1920 1968 2000 2082 1080 1082 1087 1144 0x40 0xa
>[    1.352047] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:41:HDMI-A-1]
>[    1.352048] [drm:intel_hdmi_detect] [CONNECTOR:41:HDMI-A-1]
>[    1.352050] [drm:intel_power_well_enable] enabling always-on
>[    1.355390] [drm] Initialized i915 1.6.0 20151010 for 0000:00:02.0 on minor 0
>[    1.439678] [drm:intel_hdmi_detect] Live status not up!
>[    1.439688] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:41:HDMI-A-1] status updated from 3 to 2
>[    1.439696] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:41:HDMI-A-1] disconnected
>[    1.439703] [drm:drm_setup_crtcs]
>[    1.439708] [drm:drm_enable_connectors] connector 32 enabled? yes
>[    1.439710] [drm:drm_enable_connectors] connector 41 enabled? no
>[    1.439714] [drm:intel_fb_initial_config] looking for cmdline mode on connector eDP-1
>[    1.439716] [drm:intel_fb_initial_config] looking for preferred mode on connector eDP-1 0
>[    1.439720] [drm:intel_fb_initial_config] connector eDP-1 on pipe A [CRTC:21]: 1920x1080
>[    1.439723] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping
>[    1.439726] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 21 (0,0)
>[    1.439731] [drm:intelfb_create] re-using BIOS fb
>[    1.439779] [drm:intelfb_create] allocated 1920x1080 fb: 0x00000000, bo ffff8800867c8000
>[    1.439868] [drm:drm_fb_helper_hotplug_event]
>[    1.439873] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:32:eDP-1]
>[    1.439877] [drm:intel_dp_detect] [CONNECTOR:32:eDP-1]
>[    1.439966] fbcon: inteldrmfb (fb0) is primary device
>[    1.440291] [drm:intel_dp_probe_oui] Sink OUI: 0022b9
>[    1.440743] [drm:intel_dp_probe_oui] Branch OUI: 444617
>[    1.441588] [drm:drm_edid_to_eld] ELD: no CEA Extension found
>[    1.441594] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:32:eDP-1] probed modes :
>[    1.441599] [drm:drm_mode_debug_printmodeline] Modeline 33:"1920x1080" 60 142900 1920 1968 2000 2082 1080 1082 1087 1144 0x48 0xa
>[    1.441602] [drm:drm_mode_debug_printmodeline] Modeline 34:"1920x1080" 40 95270 1920 1968 2000 2082 1080 1082 1087 1144 0x40 0xa
>[    1.441605] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:41:HDMI-A-1]
>[    1.441606] [drm:intel_hdmi_detect] [CONNECTOR:41:HDMI-A-1]
>[    1.441608] [drm:intel_power_well_enable] enabling always-on
>[    1.529700] [drm:intel_hdmi_detect] Live status not up!
>[    1.529700] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:41:HDMI-A-1] disconnected
>[    1.529712] [drm:drm_setup_crtcs]
>[    1.529716] [drm:drm_enable_connectors] connector 32 enabled? yes
>[    1.529719] [drm:drm_enable_connectors] connector 41 enabled? no
>[    1.529722] [drm:intel_fb_initial_config] looking for cmdline mode on connector eDP-1
>[    1.529725] [drm:intel_fb_initial_config] looking for preferred mode on connector eDP-1 0
>[    1.529729] [drm:intel_fb_initial_config] connector eDP-1 on pipe A [CRTC:21]: 1920x1080
>[    1.529731] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping
>[    1.529736] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 21 (0,0)
>[    1.529784] [drm:connected_sink_compute_bpp] [CONNECTOR:32:eDP-1] checking for sink bpp constrains
>[    1.529786] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to EDID reported max of 24
>[    1.529793] [drm:skl_update_scaler_crtc] Updating scaler for [CRTC:21] scaler_user index 0.31
>[    1.529796] [drm:skl_update_scaler] scaler_user index 0.31: Staged freeing scaler id 0 scaler_users = 0x0
>[    1.529798] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 270000 pixel clock 142900KHz
>[    1.529807] [drm:intel_dp_compute_config] DP link bw 0a rate select 00 lane count 2 clock 270000 bpp 24
>[    1.529809] [drm:intel_dp_compute_config] DP link bw required 342960 available 432000
>[    1.529812] [drm:intel_modeset_pipe_config] hw max bpp: 36, pipe bpp: 24, dithering: 0
>[    1.529816] [drm:intel_dump_pipe_config] [CRTC:21][modeset] config ffff880266239000 for pipe A
>[    1.529818] [drm:intel_dump_pipe_config] cpu_transcoder: D
>[    1.529819] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
>[    1.529822] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.529825] [drm:intel_dump_pipe_config] dp: 1, lanes: 2, gmch_m: 6659622, gmch_n: 8388608, link_m: 277484, link_n: 524288, tu: 64
>[    1.529827] [drm:intel_dump_pipe_config] dp: 1, lanes: 2, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[    1.529828] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
>[    1.529829] [drm:intel_dump_pipe_config] requested mode:
>[    1.529835] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 142900 1920 1968 2000 2082 1080 1082 1087 1144 0x48 0xa
>[    1.529836] [drm:intel_dump_pipe_config] adjusted mode:
>[    1.529840] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 142900 1920 1968 2000 2082 1080 1082 1087 1144 0x48 0xa
>[    1.529844] [drm:intel_dump_crtc_timings] crtc timings: 142900 1920 1968 2000 2082 1080 1082 1087 1144, type: 0x48 flags: 0xa
>[    1.529845] [drm:intel_dump_pipe_config] port clock: 270000
>[    1.529846] [drm:intel_dump_pipe_config] pipe src size: 1920x1080
>[    1.529848] [drm:intel_dump_pipe_config] num_scalers: 2, scaler_users: 0x0, scaler_id: -1
>[    1.529850] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    1.529852] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    1.529853] [drm:intel_dump_pipe_config] ips: 0
>[    1.529854] [drm:intel_dump_pipe_config] double wide: 0
>[    1.529856] [drm:intel_dump_pipe_config] ddi_pll_sel: 0; dpll_hw_state: ctrl1: 0x3, cfgcr1: 0x0, cfgcr2: 0x0
>[    1.529857] [drm:intel_dump_pipe_config] planes on this crtc
>[    1.529862] [drm:intel_dump_pipe_config] STANDARD PLANE:18 plane: 0.0 idx: 0 enabled
>[    1.529866] [drm:intel_dump_pipe_config]     FB:44, fb = 1920x1080 format = 0x34325258
>[    1.529866] [drm:intel_dump_pipe_config]     scaler:-1 src (0, 0) 0x0 dst (0, 0) 0x0
>[    1.529869] [drm:intel_dump_pipe_config] CURSOR PLANE:20 plane: 0.1 idx: 1 disabled, scaler_id = -1
>[    1.529872] [drm:intel_dump_pipe_config] STANDARD PLANE:22 plane: 0.1 idx: 2 disabled, scaler_id = -1
>[    1.529878] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:18] scaler_user index 0.0
>[    1.529882] [drm:skl_update_scaler_crtc] Updating scaler for [CRTC:21] scaler_user index 0.31
>[    1.529899] [drm:set_no_fbc_reason] Disabling FBC: disabled per chip default
>[    1.529903] [drm:intel_edp_backlight_off]
>[    1.730687] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0
>[    1.730706] [drm:lpt_disable_backlight] cpu backlight was enabled, disabling
>[    1.730737] [drm:intel_disable_pipe] disabling pipe A
>[    1.746514] [drm:edp_panel_off] Turn eDP port A panel power off
>[    1.746554] [drm:wait_panel_off] Wait for panel power off time
>[    1.746581] [drm:wait_panel_status] mask b0000000 value 00000000 status a0000003 control abcd0000
>[    1.798982] [drm:intel_get_hpd_pins] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010
>[    1.798985] [drm:intel_hpd_irq_handler] digital hpd port A - long
>[    1.798986] [drm:intel_hpd_irq_storm_detect] Received HPD interrupt on PIN 4 - cnt: 0
>[    1.799022] [drm:intel_dp_hpd_pulse] ignoring long hpd on eDP port A
>[    1.815172] [drm:wait_panel_status] Wait complete
>[    1.815216] [drm:edp_panel_on] Turn eDP port A panel power on
>[    1.815224] [drm:wait_panel_power_cycle] Wait for panel power cycle
>[    2.347719] [drm:wait_panel_status] mask b800000f value 00000000 status 08000001 control abcd0000
>[    2.388203] [drm:wait_panel_status] Wait complete
>[    2.388227] [drm:wait_panel_on] Wait for panel power on
>[    2.388245] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd0003
>[    2.481377] [drm:intel_get_hpd_pins] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010
>[    2.481380] [drm:intel_hpd_irq_handler] digital hpd port A - long
>[    2.481383] [drm:intel_hpd_irq_storm_detect] Received HPD interrupt on PIN 4 - cnt: 1
>[    2.481421] [drm:intel_dp_hpd_pulse] ignoring long hpd on eDP port A
>[    2.590502] [drm:wait_panel_status] Wait complete
>[    2.590524] [drm:edp_panel_vdd_on] Turning eDP port A VDD on
>[    2.590572] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b
>[    2.591711] [drm:intel_dp_set_signal_levels] Using signal levels 00000000
>[    2.591713] [drm:intel_dp_set_signal_levels] Using vswing level 0
>[    2.591715] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0
>[    2.592370] [drm:intel_dp_set_signal_levels] Using signal levels 04000000
>[    2.592373] [drm:intel_dp_set_signal_levels] Using vswing level 1
>[    2.592374] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0
>[    2.593013] [drm:intel_dp_link_training_clock_recovery] clock recovery OK
>[    2.593959] [drm:intel_dp_link_training_channel_equalization] Channel EQ done. DP Training successful
>[    2.594127] [drm:skylake_pfit_enable] for crtc_state = ffff880266239000
>[    2.594348] [drm:skl_wm_flush_pipe] flush pipe A (pass 3)
>[    2.594354] [drm:intel_enable_pipe] enabling pipe A
>[    2.594366] [drm:intel_edp_backlight_on]
>[    2.594368] [drm:intel_panel_enable_backlight] pipe A
>[    2.594408] [drm:intel_panel_actually_set_backlight] set backlight PWM = 937
>[    2.594447] [drm:intel_psr_enable] PSR not supported by this panel
>[    2.594448] [drm:intel_edp_drrs_enable] Panel doesn't support DRRS
>[    2.611150] [drm:intel_connector_check_state] [CONNECTOR:32:eDP-1]
>[    2.611155] [drm:check_encoder_state] [ENCODER:31:TMDS-31]
>[    2.611157] [drm:check_encoder_state] [ENCODER:40:TMDS-40]
>[    2.611163] [drm:check_crtc_state] [CRTC:21]
>[    2.611182] [drm:check_shared_dpll_state] DPLL 1
>[    2.611185] [drm:check_shared_dpll_state] DPLL 2
>[    2.611187] [drm:check_shared_dpll_state] DPLL 3
>[    2.611258] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:18] scaler_user index 0.0
>[    2.611313] [drm:drm_fb_helper_hotplug_event]
>[    2.611317] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:32:eDP-1]
>[    2.611320] [drm:intel_dp_detect] [CONNECTOR:32:eDP-1]
>[    2.611672] [drm:intel_dp_probe_oui] Sink OUI: 0022b9
>[    2.612008] [drm:intel_dp_probe_oui] Branch OUI: 444617
>[    2.612513] [drm:drm_edid_to_eld] ELD: no CEA Extension found
>[    2.612519] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:32:eDP-1] probed modes :
>[    2.612524] [drm:drm_mode_debug_printmodeline] Modeline 33:"1920x1080" 60 142900 1920 1968 2000 2082 1080 1082 1087 1144 0x48 0xa
>[    2.612528] [drm:drm_mode_debug_printmodeline] Modeline 34:"1920x1080" 40 95270 1920 1968 2000 2082 1080 1082 1087 1144 0x40 0xa
>[    2.612530] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:41:HDMI-A-1]
>[    2.612532] [drm:intel_hdmi_detect] [CONNECTOR:41:HDMI-A-1]
>[    2.612534] [drm:intel_power_well_enable] enabling always-on
>[    2.700573] [drm:intel_hdmi_detect] Live status not up!
>[    2.700573] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:41:HDMI-A-1] disconnected
>[    2.700581] [drm:drm_setup_crtcs]
>[    2.700584] [drm:drm_enable_connectors] connector 32 enabled? yes
>[    2.700586] [drm:drm_enable_connectors] connector 41 enabled? no
>[    2.700590] [drm:intel_fb_initial_config] looking for cmdline mode on connector eDP-1
>[    2.700593] [drm:intel_fb_initial_config] looking for preferred mode on connector eDP-1 0
>[    2.700597] [drm:intel_fb_initial_config] connector eDP-1 on pipe A [CRTC:21]: 1920x1080
>[    2.700599] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping
>[    2.700602] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 21 (0,0)
>[    2.700638] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:18] scaler_user index 0.0
>[    2.700720] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:18] scaler_user index 0.0
>[    2.707503] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
>[    2.707909] [drm:i915_gem_open]
>[    2.708018] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:18] scaler_user index 0.0
>[    2.708048] [drm:i915_gem_open]
>[    2.708082] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[2] ENCODERS[2]
>[    2.708084] [drm:drm_mode_getresources] [CRTC:21]
>[    2.708085] [drm:drm_mode_getresources] [CRTC:25]
>[    2.708085] [drm:drm_mode_getresources] [CRTC:29]
>[    2.708086] [drm:drm_mode_getresources] [ENCODER:31:TMDS-31]
>[    2.708087] [drm:drm_mode_getresources] [ENCODER:40:TMDS-40]
>[    2.708088] [drm:drm_mode_getresources] [CONNECTOR:32:eDP-1]
>[    2.708089] [drm:drm_mode_getresources] [CONNECTOR:41:HDMI-A-1]
>[    2.708090] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[2] ENCODERS[2]
>[    2.708094] [drm:drm_mode_getconnector] [CONNECTOR:32:?]
>[    2.708095] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:32:eDP-1]
>[    2.708096] [drm:intel_dp_detect] [CONNECTOR:32:eDP-1]
>[    2.708422] [drm:intel_dp_probe_oui] Sink OUI: 0022b9
>[    2.708742] [drm:intel_dp_probe_oui] Branch OUI: 444617
>[    2.709202] [drm:drm_edid_to_eld] ELD: no CEA Extension found
>[    2.709221] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:32:eDP-1] probed modes :
>[    2.709227] [drm:drm_mode_debug_printmodeline] Modeline 33:"1920x1080" 60 142900 1920 1968 2000 2082 1080 1082 1087 1144 0x48 0xa
>[    2.709228] [drm:drm_mode_debug_printmodeline] Modeline 34:"1920x1080" 40 95270 1920 1968 2000 2082 1080 1082 1087 1144 0x40 0xa
>[    2.709238] [drm:drm_mode_getconnector] [CONNECTOR:32:?]
>[    2.712729] [drm] RC6 on
>[    2.714966] [drm:drm_mode_getconnector] [CONNECTOR:41:?]
>[    2.714968] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:41:HDMI-A-1]
>[    2.714969] [drm:intel_hdmi_detect] [CONNECTOR:41:HDMI-A-1]
>[    2.714971] [drm:intel_power_well_enable] enabling always-on
>[    2.802553] [drm:intel_hdmi_detect] Live status not up!
>[    2.802561] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:41:HDMI-A-1] disconnected
>[    2.802574] [drm:drm_mode_getconnector] [CONNECTOR:41:?]
>[    2.802602] [drm:drm_mode_addfb2] [FB:45]
>[    5.708800] [drm:edp_panel_vdd_off_sync] Turning eDP port A VDD off
>[    5.708850] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007
>[   16.449852] [drm:intel_backlight_device_update_status] updating intel_backlight, brightness=937/937
>[   16.449856] [drm:intel_panel_actually_set_backlight] set backlight PWM = 937
>[   16.671335] [drm:intel_power_well_enable] enabling power well 2
>[   16.944100] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:18] scaler_user index 0.0
>[   17.008452] [drm:i915_gem_open]
>[   17.008535] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:18] scaler_user index 0.0
>[   17.440577] [drm:i915_gem_open]
>[   17.440658] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[2] ENCODERS[2]
>[   17.442336] [drm:i915_gem_open]
>[   17.442381] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[2] ENCODERS[2]
>[   17.442383] [drm:drm_mode_getresources] [CRTC:21]
>[   17.442383] [drm:drm_mode_getresources] [CRTC:25]
>[   17.442384] [drm:drm_mode_getresources] [CRTC:29]
>[   17.442385] [drm:drm_mode_getresources] [ENCODER:31:TMDS-31]
>[   17.442386] [drm:drm_mode_getresources] [ENCODER:40:TMDS-40]
>[   17.442387] [drm:drm_mode_getresources] [CONNECTOR:32:eDP-1]
>[   17.442388] [drm:drm_mode_getresources] [CONNECTOR:41:HDMI-A-1]
>[   17.442389] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[2] ENCODERS[2]
>[   17.443517] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[2] ENCODERS[2]
>[   17.443553] [drm:drm_mode_addfb2] [FB:45]
>[   17.443920] [drm:internal_framebuffer_create] could not create framebuffer
>[   17.443927] [drm:drm_mode_addfb2] [FB:45]
>[   17.444068] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[2] ENCODERS[2]
>[   17.444071] [drm:drm_mode_getresources] [CRTC:21]
>[   17.444072] [drm:drm_mode_getresources] [CRTC:25]
>[   17.444072] [drm:drm_mode_getresources] [CRTC:29]
>[   17.444074] [drm:drm_mode_getresources] [ENCODER:31:TMDS-31]
>[   17.444075] [drm:drm_mode_getresources] [ENCODER:40:TMDS-40]
>[   17.444076] [drm:drm_mode_getresources] [CONNECTOR:32:eDP-1]
>[   17.444077] [drm:drm_mode_getresources] [CONNECTOR:41:HDMI-A-1]
>[   17.444078] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[2] ENCODERS[2]
>[   17.444153] [drm:drm_mode_getconnector] [CONNECTOR:32:?]
>[   17.444160] [drm:drm_mode_getconnector] [CONNECTOR:32:?]
>[   17.455037] [drm:drm_mode_getconnector] [CONNECTOR:41:?]
>[   17.455043] [drm:drm_mode_getconnector] [CONNECTOR:41:?]
>[   17.465123] [drm:drm_mode_addfb2] [FB:45]
>[   17.774912] [drm:drm_mode_setcrtc] [CRTC:21]
>[   17.774919] [drm:drm_mode_setcrtc] [CONNECTOR:32:eDP-1]
>[   17.774933] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:18] scaler_user index 0.0
>[   17.978600] [drm:skl_wm_flush_pipe] flush pipe A (pass 3)
>[   57.851883] [drm:drm_mode_getconnector] [CONNECTOR:32:?]
>[   57.851887] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:32:eDP-1]
>[   57.851888] [drm:intel_dp_detect] [CONNECTOR:32:eDP-1]
>[   57.851900] [drm:edp_panel_vdd_on] Turning eDP port A VDD on
>[   57.851945] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f
>[   57.852264] [drm:intel_dp_probe_oui] Sink OUI: 0022b9
>[   57.852591] [drm:intel_dp_probe_oui] Branch OUI: 444617
>[   57.853060] [drm:drm_edid_to_eld] ELD: no CEA Extension found
>[   57.853064] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:32:eDP-1] probed modes :
>[   57.853067] [drm:drm_mode_debug_printmodeline] Modeline 33:"1920x1080" 60 142900 1920 1968 2000 2082 1080 1082 1087 1144 0x48 0xa
>[   57.853068] [drm:drm_mode_debug_printmodeline] Modeline 34:"1920x1080" 40 95270 1920 1968 2000 2082 1080 1082 1087 1144 0x40 0xa
>[   57.853073] [drm:drm_mode_getconnector] [CONNECTOR:32:?]
>[   57.853221] [drm:drm_mode_getconnector] [CONNECTOR:41:?]
>[   57.853222] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:41:HDMI-A-1]
>[   57.853224] [drm:intel_hdmi_detect] [CONNECTOR:41:HDMI-A-1]
>[   57.853225] [drm:intel_power_well_enable] enabling always-on
>[   57.940921] [drm:intel_hdmi_detect] Live status not up!
>[   57.940936] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:41:HDMI-A-1] disconnected
>[   60.853011] [drm:edp_panel_vdd_off_sync] Turning eDP port A VDD off
>[   60.853061] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007
>
>
>
>It's up and running. Restarting X.
>
>
>
>[  193.147490] [drm:skl_wm_flush_pipe] flush pipe A (pass 3)
>[  193.268012] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:18] scaler_user index 0.0
>[  193.276609] [drm:skl_wm_flush_pipe] flush pipe A (pass 3)
>[  193.295036] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:18] scaler_user index 0.0
>[  193.295057] [drm:skl_wm_flush_pipe] flush pipe A (pass 3)
>[  193.326815] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:18] scaler_user index 0.0
>[  193.326857] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:18] scaler_user index 0.0
>[  193.335131] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:18] scaler_user index 0.0
>[  193.685823] [drm:i915_gem_open]
>[  193.685973] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:18] scaler_user index 0.0
>[  194.098585] [drm:i915_gem_open]
>[  194.098662] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[2] ENCODERS[2]
>[  194.099021] [drm:i915_gem_open]
>[  194.099070] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[2] ENCODERS[2]
>[  194.099072] [drm:drm_mode_getresources] [CRTC:21]
>[  194.099073] [drm:drm_mode_getresources] [CRTC:25]
>[  194.099073] [drm:drm_mode_getresources] [CRTC:29]
>[  194.099074] [drm:drm_mode_getresources] [ENCODER:31:TMDS-31]
>[  194.099075] [drm:drm_mode_getresources] [ENCODER:40:TMDS-40]
>[  194.099076] [drm:drm_mode_getresources] [CONNECTOR:32:eDP-1]
>[  194.099077] [drm:drm_mode_getresources] [CONNECTOR:41:HDMI-A-1]
>[  194.099078] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[2] ENCODERS[2]
>[  194.099388] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[2] ENCODERS[2]
>[  194.099464] [drm:drm_mode_addfb2] [FB:45]
>[  194.099683] [drm:internal_framebuffer_create] could not create framebuffer
>[  194.099691] [drm:drm_mode_addfb2] [FB:45]
>[  194.099739] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[2] ENCODERS[2]
>[  194.099741] [drm:drm_mode_getresources] [CRTC:21]
>[  194.099743] [drm:drm_mode_getresources] [CRTC:25]
>[  194.099744] [drm:drm_mode_getresources] [CRTC:29]
>[  194.099745] [drm:drm_mode_getresources] [ENCODER:31:TMDS-31]
>[  194.099746] [drm:drm_mode_getresources] [ENCODER:40:TMDS-40]
>[  194.099747] [drm:drm_mode_getresources] [CONNECTOR:32:eDP-1]
>[  194.099749] [drm:drm_mode_getresources] [CONNECTOR:41:HDMI-A-1]
>[  194.099750] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[2] ENCODERS[2]
>[  194.099876] [drm:drm_mode_getconnector] [CONNECTOR:32:?]
>[  194.099884] [drm:drm_mode_getconnector] [CONNECTOR:32:?]
>[  194.106762] [drm:drm_mode_getconnector] [CONNECTOR:41:?]
>[  194.106768] [drm:drm_mode_getconnector] [CONNECTOR:41:?]
>[  194.115027] [drm:drm_mode_addfb2] [FB:45]
>[  194.281598] [drm:drm_mode_setcrtc] [CRTC:21]
>[  194.281611] [drm:drm_mode_setcrtc] [CONNECTOR:32:eDP-1]
>[  194.281634] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:18] scaler_user index 0.0
>[  194.361542] [drm:skl_wm_flush_pipe] flush pipe A (pass 3)
>[  200.517286] [drm:skl_wm_flush_pipe] flush pipe A (pass 3)
>[  200.632991] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:18] scaler_user index 0.0
>[  200.643870] [drm:skl_wm_flush_pipe] flush pipe A (pass 3)
>[  200.662906] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:18] scaler_user index 0.0
>[  200.662926] [drm:skl_wm_flush_pipe] flush pipe A (pass 3)
>[  200.693874] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:18] scaler_user index 0.0
>[  200.693907] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:18] scaler_user index 0.0
>[  200.702615] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:18] scaler_user index 0.0
>[  200.710158] [drm:i915_gem_open]
>[  200.710342] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:18] scaler_user index 0.0
>[  201.125451] [drm:i915_gem_open]
>[  201.125529] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[2] ENCODERS[2]
>[  201.125748] [drm:i915_gem_open]
>[  201.125777] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[2] ENCODERS[2]
>[  201.125779] [drm:drm_mode_getresources] [CRTC:21]
>[  201.125780] [drm:drm_mode_getresources] [CRTC:25]
>[  201.125781] [drm:drm_mode_getresources] [CRTC:29]
>[  201.125782] [drm:drm_mode_getresources] [ENCODER:31:TMDS-31]
>[  201.125783] [drm:drm_mode_getresources] [ENCODER:40:TMDS-40]
>[  201.125784] [drm:drm_mode_getresources] [CONNECTOR:32:eDP-1]
>[  201.125786] [drm:drm_mode_getresources] [CONNECTOR:41:HDMI-A-1]
>[  201.125787] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[2] ENCODERS[2]
>[  201.126067] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[2] ENCODERS[2]
>[  201.126128] [drm:drm_mode_addfb2] [FB:45]
>[  201.126512] [drm:internal_framebuffer_create] could not create framebuffer
>[  201.126519] [drm:drm_mode_addfb2] [FB:45]
>[  201.126639] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[2] ENCODERS[2]
>[  201.126642] [drm:drm_mode_getresources] [CRTC:21]
>[  201.126643] [drm:drm_mode_getresources] [CRTC:25]
>[  201.126644] [drm:drm_mode_getresources] [CRTC:29]
>[  201.126645] [drm:drm_mode_getresources] [ENCODER:31:TMDS-31]
>[  201.126646] [drm:drm_mode_getresources] [ENCODER:40:TMDS-40]
>[  201.126647] [drm:drm_mode_getresources] [CONNECTOR:32:eDP-1]
>[  201.126648] [drm:drm_mode_getresources] [CONNECTOR:41:HDMI-A-1]
>[  201.126649] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[2] ENCODERS[2]
>[  201.126734] [drm:drm_mode_getconnector] [CONNECTOR:32:?]
>[  201.126741] [drm:drm_mode_getconnector] [CONNECTOR:32:?]
>[  201.131926] [drm:drm_mode_getconnector] [CONNECTOR:41:?]
>[  201.131932] [drm:drm_mode_getconnector] [CONNECTOR:41:?]
>[  201.139692] [drm:drm_mode_addfb2] [FB:45]
>[  201.295506] [drm:drm_mode_setcrtc] [CRTC:21]
>[  201.295517] [drm:drm_mode_setcrtc] [CONNECTOR:32:eDP-1]
>[  201.295536] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:18] scaler_user index 0.0
>
>
>The screen is dead at this point. I cannot switch VTs, starting and stopping Xorg has no effect.

Actions: View

Attachments on bug 93950: 121443 | 121444

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.