Attachment 128902 Details for Bug 99370 – dmesg

dmesg

dmesg_action_failed.log (text/plain), 155.25 KB, created by Elio on 2017-01-11 22:45:55 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Elio

Created: 2017-01-11 22:45:55 UTC

Size: 155.25 KB

patch

obsolete

>[    0.000000] Linux version 4.9.0-rc8latestfirmware+ (gfx@gfx-desktop) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.4) ) #1 SMP Wed Dec 7 14:23:08 EST 2016
>[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-rc8latestfirmware+ root=UUID=5797af19-51f1-4ff9-a9ff-f7654c365c2d ro quiet drm.debug=0xe i915.enable_guc_loading=2 i915.enable_guc_submission=0 resume=/dev/sda3 fastboot
>[    0.000000] KERNEL supported cpus:
>[    0.000000]   Intel GenuineIntel
>[    0.000000]   AMD AuthenticAMD
>[    0.000000]   Centaur CentaurHauls
>[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
>[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
>[    0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
>[    0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
>[    0.000000] x86/fpu: xstate_offset[3]:  576, xstate_sizes[3]:   64
>[    0.000000] x86/fpu: xstate_offset[4]:  640, xstate_sizes[4]:   64
>[    0.000000] x86/fpu: Enabled xstate features 0x1b, context size is 704 bytes, using 'compacted' format.
>[    0.000000] x86/fpu: Using 'eager' FPU context switches.
>[    0.000000] e820: BIOS-provided physical RAM map:
>[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
>[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable
>[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000effffff] usable
>[    0.000000] BIOS-e820: [mem 0x000000000f000000-0x0000000012151fff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000012152000-0x0000000077f05fff] usable
>[    0.000000] BIOS-e820: [mem 0x0000000077f06000-0x0000000078145fff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000078146000-0x0000000078235fff] type 20
>[    0.000000] BIOS-e820: [mem 0x0000000078236000-0x0000000079cb5fff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000079cb6000-0x0000000079d15fff] ACPI NVS
>[    0.000000] BIOS-e820: [mem 0x0000000079d16000-0x0000000079d55fff] ACPI data
>[    0.000000] BIOS-e820: [mem 0x0000000079d56000-0x000000007ac26fff] usable
>[    0.000000] BIOS-e820: [mem 0x000000007ac27000-0x000000007ac27fff] ACPI NVS
>[    0.000000] BIOS-e820: [mem 0x000000007ac28000-0x000000007ac51fff] reserved
>[    0.000000] BIOS-e820: [mem 0x000000007ac52000-0x000000007affffff] usable
>[    0.000000] BIOS-e820: [mem 0x000000007b000000-0x000000007fffffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000047fffffff] usable
>[    0.000000] NX (Execute Disable) protection: active
>[    0.000000] efi: EFI v2.50 by EDK II
>[    0.000000] efi:  ACPI=0x79d55000  ACPI 2.0=0x79d55014  ESRT=0x79c81000  SMBIOS=0x78067000  SMBIOS 3.0=0x78065000  PROP=0x79f89920 
>[    0.000000] SMBIOS 3.0.0 present.
>[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
>[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
>[    0.000000] e820: last_pfn = 0x480000 max_arch_pfn = 0x400000000
>[    0.000000] MTRR default type: uncachable
>[    0.000000] MTRR fixed ranges enabled:
>[    0.000000]   00000-9FFFF write-back
>[    0.000000]   A0000-BFFFF uncachable
>[    0.000000]   C0000-FFFFF write-back
>[    0.000000] MTRR variable ranges enabled:
>[    0.000000]   0 base 0000000000 mask 7F80000000 write-back
>[    0.000000]   1 base 007C000000 mask 7FFC000000 uncachable
>[    0.000000]   2 base 007B000000 mask 7FFF000000 uncachable
>[    0.000000]   3 base 0100000000 mask 7F00000000 write-back
>[    0.000000]   4 base 0200000000 mask 7F00000000 write-back
>[    0.000000]   5 base 0300000000 mask 7F00000000 write-back
>[    0.000000]   6 base 0400000000 mask 7F80000000 write-back
>[    0.000000]   7 base 00FF800000 mask 70FF800000 write-combining
>[    0.000000]   8 disabled
>[    0.000000]   9 disabled
>[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
>[    0.000000] e820: last_pfn = 0x7b000 max_arch_pfn = 0x400000000
>[    0.000000] efi: requested map not found.
>[    0.000000] esrt: ESRT header is not in the memory map.
>[    0.000000] Scanning 1 areas for low memory corruption
>[    0.000000] Base memory trampoline at [ffff913b80097000] 97000 size 24576
>[    0.000000] Using GB pages for direct mapping
>[    0.000000] BRK [0x448233000, 0x448233fff] PGTABLE
>[    0.000000] BRK [0x448234000, 0x448234fff] PGTABLE
>[    0.000000] BRK [0x448235000, 0x448235fff] PGTABLE
>[    0.000000] BRK [0x448236000, 0x448236fff] PGTABLE
>[    0.000000] BRK [0x448237000, 0x448237fff] PGTABLE
>[    0.000000] BRK [0x448238000, 0x448238fff] PGTABLE
>[    0.000000] BRK [0x448239000, 0x448239fff] PGTABLE
>[    0.000000] BRK [0x44823a000, 0x44823afff] PGTABLE
>[    0.000000] BRK [0x44823b000, 0x44823bfff] PGTABLE
>[    0.000000] RAMDISK: [mem 0x33a7e000-0x35d36fff]
>[    0.000000] ACPI: Early table checksum verification disabled
>[    0.000000] ACPI: RSDP 0x0000000079D55014 000024 (v02 INTEL )
>[    0.000000] ACPI: XSDT 0x0000000079D2C188 0000E4 (v01 INTEL  EDK2     00000003 BRXT 01000013)
>[    0.000000] ACPI: FACP 0x0000000079D4D000 00010C (v05 INTEL  EDK2     00000003 BRXT 0100000D)
>[    0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aEventBlock: 32/16 (20160831/tbfadt-603)
>[    0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aEventBlock: 16, using default 32 (20160831/tbfadt-708)
>[    0.000000] ACPI: DSDT 0x0000000079D3D000 00958C (v02 INTEL  EDK2     00000003 BRXT 0100000D)
>[    0.000000] ACPI: FACS 0x0000000079D04000 000040
>[    0.000000] ACPI: SSDT 0x0000000079D53000 0003C6 (v02 INTEL  Tpm2Tabl 00001000 INTL 20150818)
>[    0.000000] ACPI: TPM2 0x0000000079D52000 000034 (v03                 00000000      00000000)
>[    0.000000] ACPI: UEFI 0x0000000079D0C000 000042 (v01 INTEL  EDK2     00000002 BRXT 01000013)
>[    0.000000] ACPI: BDAT 0x0000000079D51000 000030 (v02                 00000000      00000000)
>[    0.000000] ACPI: DBG2 0x0000000079D50000 000072 (v00 INTEL  EDK2     00000003 BRXT 0100000D)
>[    0.000000] ACPI: DBGP 0x0000000079D4F000 000034 (v01 INTEL  EDK2     00000003 BRXT 0100000D)
>[    0.000000] ACPI: HPET 0x0000000079D4C000 000038 (v01 INTEL  EDK2     00000003 BRXT 0100000D)
>[    0.000000] ACPI: LPIT 0x0000000079D4B000 00005C (v01 INTEL  EDK2     00000003 BRXT 0100000D)
>[    0.000000] ACPI: APIC 0x0000000079D4A000 000084 (v03 INTEL  EDK2     00000003 BRXT 0100000D)
>[    0.000000] ACPI: MCFG 0x0000000079D49000 00003C (v01 INTEL  EDK2     00000003 BRXT 0100000D)
>[    0.000000] ACPI: NPKT 0x0000000079D48000 000065 (v01 INTEL  EDK2     00000003 BRXT 0100000D)
>[    0.000000] ACPI: WSMT 0x0000000079D47000 000028 (v00 INTEL  EDK2     00000003 BRXT 0100000D)
>[    0.000000] ACPI: SSDT 0x0000000079D33000 0046C3 (v02 INTEL  RVPRtd3  00000003 BRXT 0100000D)
>[    0.000000] ACPI: SSDT 0x0000000079D32000 000B53 (v02 INTEL  UsbCTabl 00000003 BRXT 0100000D)
>[    0.000000] ACPI: SSDT 0x0000000079D30000 0016BE (v01 Intel_ Platform 00001000 INTL 20150818)
>[    0.000000] ACPI: SSDT 0x0000000079D2F000 000400 (v02 PmRef  Cpu0Ist  00003000 INTL 20150818)
>[    0.000000] ACPI: SSDT 0x0000000079D2E000 00072B (v02 CpuRef CpuSsdt  00003000 INTL 20150818)
>[    0.000000] ACPI: SSDT 0x0000000079D2D000 000356 (v02 PmRef  Cpu0Tst  00003000 INTL 20150818)
>[    0.000000] ACPI: SSDT 0x0000000079D54000 00017C (v02 PmRef  ApTst    00003000 INTL 20150818)
>[    0.000000] ACPI: SSDT 0x0000000079D29000 00277A (v02 SaSsdt SaSsdt   00003000 INTL 20150818)
>[    0.000000] ACPI: FPDT 0x0000000079D28000 000044 (v01 INTEL  EDK2     00000002 BRXT 01000013)
>[    0.000000] ACPI: WDAT 0x0000000079D4E000 000104 (v01                 00000000      00000000)
>[    0.000000] ACPI: NHLT 0x0000000079D3B000 001A50 (v00 INTEL  EDK2     00000002 BRXT 01000013)
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] No NUMA configuration found
>[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000047fffffff]
>[    0.000000] NODE_DATA(0) allocated [mem 0x47fffb000-0x47fffffff]
>[    0.000000] Zone ranges:
>[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
>[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
>[    0.000000]   Normal   [mem 0x0000000100000000-0x000000047fffffff]
>[    0.000000]   Device   empty
>[    0.000000] Movable zone start for each node
>[    0.000000] Early memory node ranges
>[    0.000000]   node   0: [mem 0x0000000000001000-0x0000000000057fff]
>[    0.000000]   node   0: [mem 0x0000000000059000-0x000000000009efff]
>[    0.000000]   node   0: [mem 0x0000000000100000-0x000000000effffff]
>[    0.000000]   node   0: [mem 0x0000000012152000-0x0000000077f05fff]
>[    0.000000]   node   0: [mem 0x0000000079d56000-0x000000007ac26fff]
>[    0.000000]   node   0: [mem 0x000000007ac52000-0x000000007affffff]
>[    0.000000]   node   0: [mem 0x0000000100000000-0x000000047fffffff]
>[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000047fffffff]
>[    0.000000] On node 0 totalpages: 4153296
>[    0.000000]   DMA zone: 64 pages used for memmap
>[    0.000000]   DMA zone: 1061 pages reserved
>[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
>[    0.000000]   DMA32 zone: 7489 pages used for memmap
>[    0.000000]   DMA32 zone: 479283 pages, LIFO batch:31
>[    0.000000]   Normal zone: 57344 pages used for memmap
>[    0.000000]   Normal zone: 3670016 pages, LIFO batch:31
>[    0.000000] Reserving Intel graphics memory at 0x000000007c000000-0x000000007fffffff
>[    0.000000] ACPI: PM-Timer IO Port: 0x408
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
>[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-119
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
>[    0.000000] ACPI: IRQ0 used by override.
>[    0.000000] ACPI: IRQ9 used by override.
>[    0.000000] Using ACPI (MADT) for SMP configuration information
>[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
>[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
>[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
>[    0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
>[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x000fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x0f000000-0x12151fff]
>[    0.000000] PM: Registered nosave memory: [mem 0x77f06000-0x78145fff]
>[    0.000000] PM: Registered nosave memory: [mem 0x78146000-0x78235fff]
>[    0.000000] PM: Registered nosave memory: [mem 0x78236000-0x79cb5fff]
>[    0.000000] PM: Registered nosave memory: [mem 0x79cb6000-0x79d15fff]
>[    0.000000] PM: Registered nosave memory: [mem 0x79d16000-0x79d55fff]
>[    0.000000] PM: Registered nosave memory: [mem 0x7ac27000-0x7ac27fff]
>[    0.000000] PM: Registered nosave memory: [mem 0x7ac28000-0x7ac51fff]
>[    0.000000] PM: Registered nosave memory: [mem 0x7b000000-0x7fffffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x80000000-0xdfffffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xe3ffffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xe4000000-0xfed00fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed01fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfed02000-0xffffffff]
>[    0.000000] e820: [mem 0x80000000-0xdfffffff] available for PCI devices
>[    0.000000] Booting paravirtualized kernel on bare hardware
>[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
>[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
>[    0.000000] percpu: Embedded 36 pages/cpu @ffff913fffc00000 s107736 r8192 d31528 u524288
>[    0.000000] pcpu-alloc: s107736 r8192 d31528 u524288 alloc=1*2097152
>[    0.000000] pcpu-alloc: [0] 0 1 2 3 
>[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 4087338
>[    0.000000] Policy zone: Normal
>[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-rc8latestfirmware+ root=UUID=5797af19-51f1-4ff9-a9ff-f7654c365c2d ro quiet drm.debug=0xe i915.enable_guc_loading=2 i915.enable_guc_submission=0 resume=/dev/sda3 fastboot
>[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
>[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
>[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>[    0.000000] Memory: 16173076K/16613184K available (8640K kernel code, 1436K rwdata, 3816K rodata, 1556K init, 1260K bss, 440108K reserved, 0K cma-reserved)
>[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
>[    0.000000] Hierarchical RCU implementation.
>[    0.000000] 	Build-time adjustment of leaf fanout to 64.
>[    0.000000] 	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
>[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
>[    0.000000] NR_IRQS:16640 nr_irqs:1024 16
>[    0.000000] Console: colour dummy device 80x25
>[    0.000000] console [tty0] enabled
>[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 99544814920 ns
>[    0.000000] hpet clockevent registered
>[    0.000000] tsc: PIT calibration matches HPET. 2 loops
>[    0.000000] tsc: Detected 1094.071 MHz processor
>[    0.000114] Calibrating delay loop (skipped), value calculated using timer frequency.. 2188.80 BogoMIPS (lpj=4377600)
>[    0.000121] pid_max: default: 32768 minimum: 301
>[    0.000136] ACPI: Core revision 20160831
>[    0.028327] ACPI: 10 ACPI AML tables successfully acquired and loaded
>[    0.029276] Security Framework initialized
>[    0.029279] Yama: becoming mindful.
>[    0.029299] AppArmor: AppArmor initialized
>[    0.031549] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
>[    0.041191] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
>[    0.045472] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
>[    0.045509] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
>[    0.046242] CPU: Physical Processor ID: 0
>[    0.046245] CPU: Processor Core ID: 0
>[    0.046272] mce: CPU supports 7 MCE banks
>[    0.046312] CPU0: Thermal monitoring enabled (TM1)
>[    0.046394] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
>[    0.046396] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
>[    0.050186] Freeing SMP alternatives memory: 32K (ffffffff9b0ee000 - ffffffff9b0f6000)
>[    0.069164] ftrace: allocating 33008 entries in 129 pages
>[    0.151604] smpboot: APIC(0) Converting physical 0 to logical package 0
>[    0.151607] smpboot: Max logical packages: 1
>[    0.152934] x2apic: IRQ remapping doesn't support X2APIC mode
>[    0.157877] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>[    0.197597] TSC deadline timer enabled
>[    0.197607] smpboot: CPU0: Intel 06/5c (family: 0x6, model: 0x5c, stepping: 0x9)
>[    0.197616] Performance Events: PEBS fmt3+, Goldmont events, 32-deep LBR, full-width counters, Intel PMU driver.
>[    0.197651] ... version:                4
>[    0.197652] ... bit width:              48
>[    0.197653] ... generic registers:      4
>[    0.197655] ... value mask:             0000ffffffffffff
>[    0.197657] ... max period:             0000ffffffffffff
>[    0.197658] ... fixed-purpose events:   3
>[    0.197659] ... event mask:             000000070000000f
>[    0.199525] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
>[    0.199856] x86: Booting SMP configuration:
>[    0.199860] .... node  #0, CPUs:      #1 #2 #3
>[    0.440123] x86: Booted up 1 node, 4 CPUs
>[    0.440127] smpboot: Total of 4 processors activated (8763.69 BogoMIPS)
>[    0.444099] devtmpfs: initialized
>[    0.444255] x86/mm: Memory block size: 128MB
>[    0.454292] evm: security.selinux
>[    0.454294] evm: security.SMACK64
>[    0.454295] evm: security.SMACK64EXEC
>[    0.454296] evm: security.SMACK64TRANSMUTE
>[    0.454297] evm: security.SMACK64MMAP
>[    0.454298] evm: security.ima
>[    0.454300] evm: security.capability
>[    0.454544] PM: Registering ACPI NVS region [mem 0x79cb6000-0x79d15fff] (393216 bytes)
>[    0.454561] PM: Registering ACPI NVS region [mem 0x7ac27000-0x7ac27fff] (4096 bytes)
>[    0.454701] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
>[    0.454799] pinctrl core: initialized pinctrl subsystem
>[    0.455129] RTC time: 16:08:00, date: 12/06/16
>[    0.455415] NET: Registered protocol family 16
>[    0.470683] cpuidle: using governor ladder
>[    0.486705] cpuidle: using governor menu
>[    0.486709] PCCT header not found.
>[    0.486901] ACPI: bus type PCI registered
>[    0.486904] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
>[    0.487059] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
>[    0.487063] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820
>[    0.487078] PCI: Using configuration type 1 for base access
>[    0.503065] HugeTLB registered 1 GB page size, pre-allocated 0 pages
>[    0.503068] HugeTLB registered 2 MB page size, pre-allocated 0 pages
>[    0.503688] ACPI: Added _OSI(Module Device)
>[    0.503691] ACPI: Added _OSI(Processor Device)
>[    0.503692] ACPI: Added _OSI(3.0 _SCP Extensions)
>[    0.503694] ACPI: Added _OSI(Processor Aggregator Device)
>[    0.505098] ACPI: Executed 6 blocks of module-level executable AML code
>[    0.521451] ACPI: Dynamic OEM Table Load:
>[    0.521472] ACPI: SSDT 0xFFFF913FED202400 000102 (v02 PmRef  Cpu0Cst  00003001 INTL 20150818)
>[    0.522481] ACPI: Dynamic OEM Table Load:
>[    0.522500] ACPI: SSDT 0xFFFF913FED1E0800 00015F (v02 PmRef  ApIst    00003000 INTL 20150818)
>[    0.523037] ACPI: Dynamic OEM Table Load:
>[    0.523055] ACPI: SSDT 0xFFFF913FED7A5480 00008D (v02 PmRef  ApCst    00003000 INTL 20150818)
>[    0.525332] ACPI : EC: EC started
>[    0.887975] ACPI: \_SB_.PCI0.LPCB.H_EC: Used as first EC
>[    0.887979] ACPI: \_SB_.PCI0.LPCB.H_EC: GPE=0x2b, EC_CMD/EC_SC=0x66, EC_DATA=0x62
>[    0.887983] ACPI: \_SB_.PCI0.LPCB.H_EC: Used as boot DSDT EC to handle transactions
>[    0.887984] ACPI: Interpreter enabled
>[    0.888043] ACPI: (supports S0 S3 S4 S5)
>[    0.888046] ACPI: Using IOAPIC for interrupt routing
>[    0.888133] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>[    0.893983] ACPI: Power Resource [PXP] (off)
>[    0.895448] ACPI: Power Resource [PXP] (on)
>[    0.921086] ACPI: Power Resource [PXP] (on)
>[    0.945090] ACPI: Power Resource [PXP] (off)
>[    0.946352] ACPI: Power Resource [PXP] (off)
>[    0.947602] ACPI: Power Resource [PXP] (off)
>[    0.949214] ACPI: Power Resource [SPPR] (on)
>[    0.972696] ACPI: Power Resource [ODPR] (on)
>[    0.973075] ACPI: Power Resource [SPPR] (off)
>[    0.973819] ACPI: Power Resource [ODPR] (on)
>[    0.974547] ACPI: Power Resource [UPPR] (on)
>[    0.975148] ACPI: Power Resource [PX03] (on)
>[    0.976210] ACPI: Power Resource [UPPR] (on)
>[    0.976770] ACPI: Power Resource [UPPR] (on)
>[    0.977751] ACPI: Power Resource [UPPR] (on)
>[    0.978381] ACPI: Power Resource [UPPR] (on)
>[    0.978923] ACPI: Power Resource [UPPR] (on)
>[    0.979546] ACPI: Power Resource [USBC] (on)
>[    0.979847] ACPI: Power Resource [SDPR] (on)
>[    1.001302] ACPI: Power Resource [LSPR] (on)
>[    1.007988] ACPI: Power Resource [PAUD] (on)
>[    1.015527] ACPI: Power Resource [FN00] (on)
>[    1.190960] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
>[    1.190973] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
>[    1.192754] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
>[    1.192786] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
>[    1.194467] PCI host bridge to bus 0000:00
>[    1.194473] pci_bus 0000:00: root bus resource [io  0x0070-0x0077]
>[    1.194477] pci_bus 0000:00: root bus resource [io  0x0000-0x006f window]
>[    1.194480] pci_bus 0000:00: root bus resource [io  0x0078-0x0cf7 window]
>[    1.194483] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
>[    1.194486] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
>[    1.194489] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
>[    1.194493] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window]
>[    1.194496] pci_bus 0000:00: root bus resource [mem 0x7c000001-0x7fffffff window]
>[    1.194499] pci_bus 0000:00: root bus resource [mem 0x7b800001-0x7bffffff window]
>[    1.194502] pci_bus 0000:00: root bus resource [mem 0x80000000-0xcfffffff window]
>[    1.194505] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff window]
>[    1.194509] pci_bus 0000:00: root bus resource [bus 00-ff]
>[    1.194530] pci 0000:00:00.0: [8086:5af0] type 00 class 0x060000
>[    1.195185] pci 0000:00:02.0: [8086:5a84] type 00 class 0x030000
>[    1.195209] pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x90ffffff 64bit]
>[    1.195224] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff 64bit pref]
>[    1.195235] pci 0000:00:02.0: reg 0x20: [io  0x2000-0x203f]
>[    1.195847] pci 0000:00:03.0: [8086:5a88] type 00 class 0x048000
>[    1.195867] pci 0000:00:03.0: reg 0x10: [mem 0x91000000-0x91ffffff 64bit]
>[    1.196487] pci 0000:00:0e.0: [8086:5a98] type 00 class 0x040300
>[    1.196524] pci 0000:00:0e.0: reg 0x10: [mem 0x92310000-0x92313fff 64bit]
>[    1.196564] pci 0000:00:0e.0: reg 0x20: [mem 0x92000000-0x920fffff 64bit]
>[    1.196663] pci 0000:00:0e.0: PME# supported from D0 D3hot D3cold
>[    1.197238] pci 0000:00:0e.0: System wakeup disabled by ACPI
>[    1.197351] pci 0000:00:0f.0: [8086:5a9a] type 00 class 0x078000
>[    1.197395] pci 0000:00:0f.0: reg 0x10: [mem 0x92318000-0x92318fff 64bit]
>[    1.197559] pci 0000:00:0f.0: PME# supported from D3hot
>[    1.198118] pci 0000:00:11.0: [8086:5aa2] type 00 class 0x005007
>[    1.198159] pci 0000:00:11.0: reg 0x10: [mem 0x92314000-0x92315fff 64bit]
>[    1.198190] pci 0000:00:11.0: reg 0x18: [mem 0x9231b000-0x9231bfff 64bit]
>[    1.198842] pci 0000:00:12.0: [8086:5ae3] type 00 class 0x010601
>[    1.198871] pci 0000:00:12.0: reg 0x10: [mem 0x92316000-0x92317fff]
>[    1.198885] pci 0000:00:12.0: reg 0x14: [mem 0x92342000-0x923420ff]
>[    1.198899] pci 0000:00:12.0: reg 0x18: [io  0x2080-0x2087]
>[    1.198913] pci 0000:00:12.0: reg 0x1c: [io  0x2088-0x208b]
>[    1.198934] pci 0000:00:12.0: reg 0x20: [io  0x2060-0x207f]
>[    1.198948] pci 0000:00:12.0: reg 0x24: [mem 0x92340000-0x923407ff]
>[    1.199020] pci 0000:00:12.0: PME# supported from D3hot
>[    1.199599] pci 0000:00:13.0: [8086:5ada] type 01 class 0x060400
>[    1.199727] pci 0000:00:13.0: PME# supported from D0 D3hot D3cold
>[    1.200313] pci 0000:00:13.0: System wakeup disabled by ACPI
>[    1.200463] pci 0000:00:14.0: [8086:5ad7] type 01 class 0x060400
>[    1.200603] pci 0000:00:14.0: PME# supported from D0 D3hot D3cold
>[    1.201186] pci 0000:00:14.0: System wakeup disabled by ACPI
>[    1.201326] pci 0000:00:15.0: [8086:5aa8] type 00 class 0x0c0330
>[    1.201364] pci 0000:00:15.0: reg 0x10: [mem 0x92300000-0x9230ffff 64bit]
>[    1.201490] pci 0000:00:15.0: PME# supported from D3hot D3cold
>[    1.201961] pci 0000:00:15.0: System wakeup disabled by ACPI
>[    1.202094] pci 0000:00:16.0: [8086:5aac] type 00 class 0x118000
>[    1.202131] pci 0000:00:16.0: reg 0x10: [mem 0x9231c000-0x9231cfff 64bit]
>[    1.202154] pci 0000:00:16.0: reg 0x18: [mem 0x9231d000-0x9231dfff 64bit]
>[    1.202759] pci 0000:00:16.1: [8086:5aae] type 00 class 0x118000
>[    1.202796] pci 0000:00:16.1: reg 0x10: [mem 0x9231e000-0x9231efff 64bit]
>[    1.202817] pci 0000:00:16.1: reg 0x18: [mem 0x9231f000-0x9231ffff 64bit]
>[    1.203421] pci 0000:00:16.2: [8086:5ab0] type 00 class 0x118000
>[    1.203465] pci 0000:00:16.2: reg 0x10: [mem 0x92320000-0x92320fff 64bit]
>[    1.203487] pci 0000:00:16.2: reg 0x18: [mem 0x92321000-0x92321fff 64bit]
>[    1.204093] pci 0000:00:16.3: [8086:5ab2] type 00 class 0x118000
>[    1.204131] pci 0000:00:16.3: reg 0x10: [mem 0x92322000-0x92322fff 64bit]
>[    1.204153] pci 0000:00:16.3: reg 0x18: [mem 0x92323000-0x92323fff 64bit]
>[    1.204770] pci 0000:00:17.0: [8086:5ab4] type 00 class 0x118000
>[    1.204809] pci 0000:00:17.0: reg 0x10: [mem 0x92324000-0x92324fff 64bit]
>[    1.204828] pci 0000:00:17.0: reg 0x18: [mem 0x92325000-0x92325fff 64bit]
>[    1.205430] pci 0000:00:17.1: [8086:5ab6] type 00 class 0x118000
>[    1.205474] pci 0000:00:17.1: reg 0x10: [mem 0x92326000-0x92326fff 64bit]
>[    1.205496] pci 0000:00:17.1: reg 0x18: [mem 0x92327000-0x92327fff 64bit]
>[    1.206108] pci 0000:00:17.2: [8086:5ab8] type 00 class 0x118000
>[    1.206146] pci 0000:00:17.2: reg 0x10: [mem 0x92328000-0x92328fff 64bit]
>[    1.206170] pci 0000:00:17.2: reg 0x18: [mem 0x92329000-0x92329fff 64bit]
>[    1.206777] pci 0000:00:17.3: [8086:5aba] type 00 class 0x118000
>[    1.206815] pci 0000:00:17.3: reg 0x10: [mem 0x9232a000-0x9232afff 64bit]
>[    1.206837] pci 0000:00:17.3: reg 0x18: [mem 0x9232b000-0x9232bfff 64bit]
>[    1.207457] pci 0000:00:18.0: [8086:5abc] type 00 class 0x118000
>[    1.207497] pci 0000:00:18.0: reg 0x10: [mem 0x9232c000-0x9232cfff 64bit]
>[    1.207522] pci 0000:00:18.0: reg 0x18: [mem 0x9232d000-0x9232dfff 64bit]
>[    1.208125] pci 0000:00:18.1: [8086:5abe] type 00 class 0x118000
>[    1.208165] pci 0000:00:18.1: reg 0x10: [mem 0x9232e000-0x9232efff 64bit]
>[    1.208185] pci 0000:00:18.1: reg 0x18: [mem 0x9232f000-0x9232ffff 64bit]
>[    1.208793] pci 0000:00:18.2: [8086:5ac0] type 00 class 0x118000
>[    1.208839] pci 0000:00:18.2: reg 0x10: [mem 0x92330000-0x92330fff 64bit]
>[    1.208860] pci 0000:00:18.2: reg 0x18: [mem 0x92331000-0x92331fff 64bit]
>[    1.209467] pci 0000:00:18.3: [8086:5aee] type 00 class 0x118000
>[    1.209507] pci 0000:00:18.3: reg 0x10: [mem 0x92332000-0x92332fff 64bit]
>[    1.209529] pci 0000:00:18.3: reg 0x18: [mem 0x92333000-0x92333fff 64bit]
>[    1.210313] pci 0000:00:19.0: [8086:5ac2] type 00 class 0x118000
>[    1.210359] pci 0000:00:19.0: reg 0x10: [mem 0x92334000-0x92334fff 64bit]
>[    1.210380] pci 0000:00:19.0: reg 0x18: [mem 0x92335000-0x92335fff 64bit]
>[    1.210979] pci 0000:00:19.1: [8086:5ac4] type 00 class 0x118000
>[    1.211016] pci 0000:00:19.1: reg 0x10: [mem 0x92336000-0x92336fff 64bit]
>[    1.211039] pci 0000:00:19.1: reg 0x18: [mem 0x92337000-0x92337fff 64bit]
>[    1.211651] pci 0000:00:19.2: [8086:5ac6] type 00 class 0x118000
>[    1.211687] pci 0000:00:19.2: reg 0x10: [mem 0x92338000-0x92338fff 64bit]
>[    1.211710] pci 0000:00:19.2: reg 0x18: [mem 0x92339000-0x92339fff 64bit]
>[    1.212341] pci 0000:00:1b.0: [8086:5aca] type 00 class 0x080501
>[    1.212374] pci 0000:00:1b.0: reg 0x10: [mem 0x9233a000-0x9233afff 64bit]
>[    1.212395] pci 0000:00:1b.0: reg 0x18: [mem 0x9233b000-0x9233bfff 64bit]
>[    1.213028] pci 0000:00:1c.0: [8086:5acc] type 00 class 0x080501
>[    1.213063] pci 0000:00:1c.0: reg 0x10: [mem 0x9233c000-0x9233cfff 64bit]
>[    1.213084] pci 0000:00:1c.0: reg 0x18: [mem 0x9233d000-0x9233dfff 64bit]
>[    1.213723] pci 0000:00:1e.0: [8086:5ad0] type 00 class 0x080501
>[    1.213757] pci 0000:00:1e.0: reg 0x10: [mem 0x9233e000-0x9233efff 64bit]
>[    1.213776] pci 0000:00:1e.0: reg 0x18: [mem 0x9233f000-0x9233ffff 64bit]
>[    1.214396] pci 0000:00:1f.0: [8086:5ae8] type 00 class 0x060100
>[    1.215219] pci 0000:00:1f.1: [8086:5ad4] type 00 class 0x0c0500
>[    1.215280] pci 0000:00:1f.1: reg 0x10: [mem 0x92341000-0x923410ff 64bit]
>[    1.215369] pci 0000:00:1f.1: reg 0x20: [io  0x2040-0x205f]
>[    1.216137] pci 0000:01:00.0: [8086:1539] type 00 class 0x020000
>[    1.216174] pci 0000:01:00.0: reg 0x10: [mem 0x92200000-0x9221ffff]
>[    1.216211] pci 0000:01:00.0: reg 0x18: [io  0x1000-0x101f]
>[    1.216225] pci 0000:01:00.0: reg 0x1c: [mem 0x92220000-0x92223fff]
>[    1.216396] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
>[    1.216474] pci 0000:01:00.0: System wakeup disabled by ACPI
>[    1.226157] pci 0000:00:13.0: PCI bridge to [bus 01]
>[    1.226164] pci 0000:00:13.0:   bridge window [io  0x1000-0x1fff]
>[    1.226170] pci 0000:00:13.0:   bridge window [mem 0x92200000-0x922fffff]
>[    1.226806] pci 0000:02:00.0: [8086:095a] type 00 class 0x028000
>[    1.226991] pci 0000:02:00.0: reg 0x10: [mem 0x92100000-0x92101fff 64bit]
>[    1.227560] pci 0000:02:00.0: can't set Max Payload Size to 256; if necessary, use "pci=pcie_bus_safe" and report a bug
>[    1.227970] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
>[    1.228209] pci 0000:02:00.0: System wakeup disabled by ACPI
>[    1.238300] pci 0000:00:14.0: PCI bridge to [bus 02]
>[    1.238309] pci 0000:00:14.0:   bridge window [mem 0x92100000-0x921fffff]
>[    1.245903] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
>[    1.246058] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
>[    1.246209] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
>[    1.246374] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
>[    1.246527] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
>[    1.246684] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
>[    1.246835] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
>[    1.246989] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
>[    1.248871] ACPI: Enabled 2 GPEs in block 00 to 7F
>[    1.249112] ACPI : EC: event unblocked
>[    1.249143] ACPI: \_SB_.PCI0.LPCB.H_EC: GPE=0x2b, EC_CMD/EC_SC=0x66, EC_DATA=0x62
>[    1.249147] ACPI: \_SB_.PCI0.LPCB.H_EC: Used as boot DSDT EC to handle transactions and events
>[    1.249640] pci 0000:00:02.0: vgaarb: setting as boot VGA device
>[    1.249646] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
>[    1.249660] pci 0000:00:02.0: vgaarb: bridge control possible
>[    1.249662] vgaarb: loaded
>[    1.250155] SCSI subsystem initialized
>[    1.250286] libata version 3.00 loaded.
>[    1.250337] ACPI: bus type USB registered
>[    1.250378] usbcore: registered new interface driver usbfs
>[    1.250399] usbcore: registered new interface driver hub
>[    1.250440] usbcore: registered new device driver usb
>[    1.250652] Registered efivars operations
>[    1.263484] PCI: Using ACPI for IRQ routing
>[    1.270610] PCI: pci_cache_line_size set to 64 bytes
>[    1.271144] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
>[    1.271148] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
>[    1.271150] e820: reserve RAM buffer [mem 0x0f000000-0x0fffffff]
>[    1.271152] e820: reserve RAM buffer [mem 0x77f06000-0x77ffffff]
>[    1.271154] e820: reserve RAM buffer [mem 0x7ac27000-0x7bffffff]
>[    1.271156] e820: reserve RAM buffer [mem 0x7b000000-0x7bffffff]
>[    1.271396] NetLabel: Initializing
>[    1.271399] NetLabel:  domain hash size = 128
>[    1.271400] NetLabel:  protocols = UNLABELED CIPSOv4
>[    1.271429] NetLabel:  unlabeled traffic allowed by default
>[    1.271809] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
>[    1.271824] hpet0: 8 comparators, 64-bit 19.200000 MHz counter
>[    1.273897] clocksource: Switched to clocksource hpet
>[    1.290065] VFS: Disk quotas dquot_6.6.0
>[    1.290113] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>[    1.290271] AppArmor: AppArmor Filesystem Enabled
>[    1.290389] pnp: PnP ACPI init
>[    1.290912] system 00:00: [io  0x06a4] has been reserved
>[    1.290916] system 00:00: [io  0x06a0] has been reserved
>[    1.290925] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    1.291188] pnp 00:01: disabling [io  0x164e-0x164f] because it overlaps 0000:00:13.0 BAR 13 [io  0x1000-0x1fff]
>[    1.291272] system 00:01: [io  0x0680-0x069f] has been reserved
>[    1.291276] system 00:01: [io  0x0400-0x047f] has been reserved
>[    1.291279] system 00:01: [io  0x0500-0x05fe] has been reserved
>[    1.291283] system 00:01: [io  0x0600-0x061f] has been reserved
>[    1.291290] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    1.291835] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
>[    1.293333] system 00:03: [mem 0xe0000000-0xefffffff] could not be reserved
>[    1.293337] system 00:03: [mem 0xfea00000-0xfeafffff] has been reserved
>[    1.293341] system 00:03: [mem 0xfed01000-0xfed01fff] has been reserved
>[    1.293345] system 00:03: [mem 0xfed03000-0xfed03fff] has been reserved
>[    1.293348] system 00:03: [mem 0xfed06000-0xfed06fff] has been reserved
>[    1.293352] system 00:03: [mem 0xfed08000-0xfed09fff] has been reserved
>[    1.293356] system 00:03: [mem 0xfed80000-0xfedbffff] has been reserved
>[    1.293359] system 00:03: [mem 0xfed1c000-0xfed1cfff] has been reserved
>[    1.293366] system 00:03: [mem 0xfee00000-0xfeefffff] has been reserved
>[    1.293373] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    1.293890] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
>[    1.294295] pnp: PnP ACPI: found 5 devices
>[    1.306106] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
>[    1.306166] pci 0000:00:13.0: PCI bridge to [bus 01]
>[    1.306173] pci 0000:00:13.0:   bridge window [io  0x1000-0x1fff]
>[    1.306181] pci 0000:00:13.0:   bridge window [mem 0x92200000-0x922fffff]
>[    1.306194] pci 0000:00:14.0: PCI bridge to [bus 02]
>[    1.306205] pci 0000:00:14.0:   bridge window [mem 0x92100000-0x921fffff]
>[    1.306220] pci_bus 0000:00: resource 4 [io  0x0070-0x0077]
>[    1.306224] pci_bus 0000:00: resource 5 [io  0x0000-0x006f window]
>[    1.306227] pci_bus 0000:00: resource 6 [io  0x0078-0x0cf7 window]
>[    1.306230] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
>[    1.306234] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
>[    1.306237] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
>[    1.306240] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window]
>[    1.306244] pci_bus 0000:00: resource 11 [mem 0x7c000001-0x7fffffff window]
>[    1.306247] pci_bus 0000:00: resource 12 [mem 0x7b800001-0x7bffffff window]
>[    1.306250] pci_bus 0000:00: resource 13 [mem 0x80000000-0xcfffffff window]
>[    1.306253] pci_bus 0000:00: resource 14 [mem 0xe0000000-0xefffffff window]
>[    1.306257] pci_bus 0000:01: resource 0 [io  0x1000-0x1fff]
>[    1.306260] pci_bus 0000:01: resource 1 [mem 0x92200000-0x922fffff]
>[    1.306264] pci_bus 0000:02: resource 1 [mem 0x92100000-0x921fffff]
>[    1.306674] NET: Registered protocol family 2
>[    1.307116] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>[    1.308045] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>[    1.308752] TCP: Hash tables configured (established 131072 bind 65536)
>[    1.308847] UDP hash table entries: 8192 (order: 6, 262144 bytes)
>[    1.309128] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
>[    1.309474] NET: Registered protocol family 1
>[    1.309510] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
>[    1.311162] PCI: CLS 64 bytes, default 64
>[    1.311272] Trying to unpack rootfs image as initramfs...
>[    2.820499] Freeing initrd memory: 35556K (ffff913bb3a7e000 - ffff913bb5d37000)
>[    2.820506] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>[    2.820510] software IO TLB [mem 0x71e04000-0x75e04000] (64MB) mapped at [ffff913bf1e04000-ffff913bf5e03fff]
>[    2.820858] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
>[    2.820861] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
>[    2.820862] RAPL PMU: hw unit of domain package 2^-14 Joules
>[    2.820864] RAPL PMU: hw unit of domain dram 2^-14 Joules
>[    2.820865] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
>[    2.821004] Scanning for low memory corruption every 60 seconds
>[    2.822054] futex hash table entries: 1024 (order: 4, 65536 bytes)
>[    2.822099] audit: initializing netlink subsys (disabled)
>[    2.822128] audit: type=2000 audit(1481040481.759:1): initialized
>[    2.823012] Initialise system trusted keyrings
>[    2.823242] workingset: timestamp_bits=40 max_order=22 bucket_order=0
>[    2.827687] zbud: loaded
>[    2.829204] fuse init (API version 7.26)
>[    2.830907] Key type asymmetric registered
>[    2.830909] Asymmetric key parser 'x509' registered
>[    2.831003] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
>[    2.831092] io scheduler noop registered
>[    2.831095] io scheduler deadline registered (default)
>[    2.831113] io scheduler cfq registered
>[    2.832296] pcieport 0000:00:13.0: Signaling PME through PCIe PME interrupt
>[    2.832300] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
>[    2.832307] pcie_pme 0000:00:13.0:pcie001: service driver pcie_pme loaded
>[    2.832352] pcieport 0000:00:14.0: Signaling PME through PCIe PME interrupt
>[    2.832355] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
>[    2.832365] pcie_pme 0000:00:14.0:pcie001: service driver pcie_pme loaded
>[    2.832377] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>[    2.832390] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
>[    2.832465] efifb: probing for efifb
>[    2.832500] efifb: framebuffer at 0x80000000, using 8128k, total 8128k
>[    2.832502] efifb: mode is 1920x1080x32, linelength=7680, pages=1
>[    2.832503] efifb: scrolling: redraw
>[    2.832506] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
>[    2.847726] Console: switching to colour frame buffer device 240x67
>[    2.862546] fb0: EFI VGA frame buffer device
>[    2.862567] intel_idle: does not run on family 6 model 92
>[    2.862754] ACPI: AC Adapter [ADP1] (off-line)
>[    2.863354] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C09:00/PNP0C0D:00/input/input0
>[    2.863760] ACPI: Lid Switch [LID0]
>[    2.863886] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
>[    2.863892] ACPI: Power Button [PWRB]
>[    2.863993] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
>[    2.863998] ACPI: Power Button [PWRF]
>[    2.882206] thermal LNXTHERM:00: registered as thermal_zone0
>[    2.882210] ACPI: Thermal Zone [TZ01] (34 C)
>[    2.882290] GHES: HEST is not enabled!
>[    2.882585] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
>[    2.882624] ACPI: Battery Slot [BAT0] (battery present)
>[    2.882716] ACPI: Battery Slot [BAT1] (battery absent)
>[    2.903361] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
>[    2.908546] Linux agpgart interface v0.103
>[    2.916870] brd: module loaded
>[    2.920348] loop: module loaded
>[    2.920849] libphy: Fixed MDIO Bus: probed
>[    2.920852] tun: Universal TUN/TAP device driver, 1.6
>[    2.920853] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
>[    2.920964] PPP generic driver version 2.4.2
>[    2.921086] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>[    2.921092] ehci-pci: EHCI PCI platform driver
>[    2.921117] ehci-platform: EHCI generic platform driver
>[    2.921142] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>[    2.921146] ohci-pci: OHCI PCI platform driver
>[    2.921168] ohci-platform: OHCI generic platform driver
>[    2.921185] uhci_hcd: USB Universal Host Controller Interface driver
>[    2.921581] xhci_hcd 0000:00:15.0: xHCI Host Controller
>[    2.921593] xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 1
>[    2.922726] xhci_hcd 0000:00:15.0: hcc params 0x200077c1 hci version 0x100 quirks 0x01009810
>[    2.922737] xhci_hcd 0000:00:15.0: cache line size of 64 is not supported
>[    2.922943] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>[    2.922947] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    2.922951] usb usb1: Product: xHCI Host Controller
>[    2.922954] usb usb1: Manufacturer: Linux 4.9.0-rc8latestfirmware+ xhci-hcd
>[    2.922956] usb usb1: SerialNumber: 0000:00:15.0
>[    2.923266] hub 1-0:1.0: USB hub found
>[    2.923289] hub 1-0:1.0: 8 ports detected
>[    2.925156] xhci_hcd 0000:00:15.0: xHCI Host Controller
>[    2.925167] xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 2
>[    2.925243] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
>[    2.925246] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    2.925250] usb usb2: Product: xHCI Host Controller
>[    2.925253] usb usb2: Manufacturer: Linux 4.9.0-rc8latestfirmware+ xhci-hcd
>[    2.925255] usb usb2: SerialNumber: 0000:00:15.0
>[    2.925536] hub 2-0:1.0: USB hub found
>[    2.925557] hub 2-0:1.0: 7 ports detected
>[    2.927411] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
>[    2.927413] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
>[    2.927903] i8042: Warning: Keylock active
>[    2.928112] serio: i8042 KBD port at 0x60,0x64 irq 1
>[    2.928397] mousedev: PS/2 mouse device common for all mice
>[    2.928826] rtc_cmos 00:04: RTC can wake from S4
>[    2.929343] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
>[    2.929442] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
>[    2.929454] i2c /dev entries driver
>[    2.929587] device-mapper: uevent: version 1.0.3
>[    2.929755] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
>[    2.929778] intel_pstate: Intel P-state driver initializing
>[    2.930252] ledtrig-cpu: registered to indicate activity on CPUs
>[    2.930254] EFI Variables Facility v0.08 2004-May-17
>[    2.945117] NET: Registered protocol family 10
>[    2.945439] NET: Registered protocol family 17
>[    2.945451] Key type dns_resolver registered
>[    2.945796] microcode: sig=0x506c9, pf=0x1, revision=0x12
>[    2.945889] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
>[    2.946159] registered taskstats version 1
>[    2.946164] Loading compiled-in X.509 certificates
>[    2.950004] Loaded X.509 cert 'Build time autogenerated kernel key: 027be87dd562b2d1f47b928dcb9fd3e5a10593fd'
>[    2.950045] zswap: loaded using pool lzo/zbud
>[    2.952849] Key type trusted registered
>[    2.957684] Key type encrypted registered
>[    2.957689] AppArmor: AppArmor sha1 policy hashing enabled
>[    2.957692] ima: No TPM chip found, activating TPM-bypass!
>[    2.957725] evm: HMAC attrs: 0x1
>[    2.958607]   Magic number: 12:249:135
>[    2.958632] block ram0: hash matches
>[    2.958673] platform INT3472:01: hash matches
>[    2.958692] acpi INT3472:01: hash matches
>[    2.958886] rtc_cmos 00:04: setting system clock to 2016-12-06 16:08:02 UTC (1481040482)
>[    2.958983] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
>[    2.958984] EDD information not available.
>[    2.959057] PM: Checking hibernation image partition /dev/sda3
>[    3.149967] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0
>[    3.249964] usb 1-2: new low-speed USB device number 2 using xhci_hcd
>[    3.403953] usb 1-2: New USB device found, idVendor=046e, idProduct=550f
>[    3.403955] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    3.403957] usb 1-2: Product: USB Multimedia Keyboard
>[    3.403958] usb 1-2: Manufacturer: BTC
>[    3.405927] atkbd serio0: Failed to enable keyboard on isa0060/serio0
>[    3.406018] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
>[    3.406449] PM: Hibernation image not present or could not be loaded.
>[    3.408387] Freeing unused kernel memory: 1556K (ffffffff9af69000 - ffffffff9b0ee000)
>[    3.408390] Write protecting the kernel read-only data: 14336k
>[    3.409014] Freeing unused kernel memory: 1584K (ffff913fc7874000 - ffff913fc7a00000)
>[    3.409840] Freeing unused kernel memory: 280K (ffff913fc7dba000 - ffff913fc7e00000)
>[    3.425854] random: systemd-udevd: uninitialized urandom read (16 bytes read)
>[    3.425990] random: systemd-udevd: uninitialized urandom read (16 bytes read)
>[    3.426009] random: systemd-udevd: uninitialized urandom read (16 bytes read)
>[    3.427031] random: udevadm: uninitialized urandom read (16 bytes read)
>[    3.427084] random: udevadm: uninitialized urandom read (16 bytes read)
>[    3.429435] random: udevadm: uninitialized urandom read (16 bytes read)
>[    3.429460] random: udevadm: uninitialized urandom read (16 bytes read)
>[    3.430071] random: udevadm: uninitialized urandom read (16 bytes read)
>[    3.430156] random: udevadm: uninitialized urandom read (16 bytes read)
>[    3.430232] random: udevadm: uninitialized urandom read (16 bytes read)
>[    3.503368] FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED
>[    3.509982] usb 2-5: new SuperSpeed USB device number 2 using xhci_hcd
>[    3.514632] hidraw: raw HID events driver (C) Jiri Kosina
>[    3.522528] sdhci: Secure Digital Host Controller Interface driver
>[    3.522530] sdhci: Copyright(c) Pierre Ossman
>[    3.524390] sdhci-pci 0000:00:1b.0: SDHCI controller found [8086:5aca] (rev a)
>[    3.528488] pps_core: LinuxPPS API ver. 1 registered
>[    3.528490] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
>[    3.530370] PTP clock support registered
>[    3.531987] dca service started, version 1.12.1
>[    3.536330] usb 2-5: New USB device found, idVendor=125f, idProduct=db8a
>[    3.536333] usb 2-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[    3.536335] usb 2-5: Product: ADATA USB Flash Drive
>[    3.536337] usb 2-5: Manufacturer: ADATA
>[    3.536338] usb 2-5: SerialNumber: 25C1113160150216
>[    3.536475] mmc0: SDHCI controller on PCI [0000:00:1b.0] using ADMA 64-bit
>[    3.536506] sdhci-pci 0000:00:1c.0: SDHCI controller found [8086:5acc] (rev a)
>[    3.541246] [drm] Initialized
>[    3.541725] mmc1: SDHCI controller on PCI [0000:00:1c.0] using ADMA 64-bit
>[    3.541760] sdhci-pci 0000:00:1e.0: SDHCI controller found [8086:5ad0] (rev a)
>[    3.543783] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
>[    3.543785] igb: Copyright (c) 2007-2014 Intel Corporation.
>[    3.543837] igb 0000:01:00.0: enabling device (0000 -> 0002)
>[    3.546616] mmc2: SDHCI controller on PCI [0000:00:1e.0] using ADMA 64-bit
>[    3.546703] ahci 0000:00:12.0: version 3.0
>[    3.557054] ahci 0000:00:12.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
>[    3.557058] ahci 0000:00:12.0: flags: 64bit ncq sntf pm clo only pmp pio slum part deso sadm sds apst 
>[    3.558123] scsi host0: ahci
>[    3.558225] ata1: SATA max UDMA/133 abar m2048@0x92340000 port 0x92340100 irq 373
>[    3.573737] pps pps0: new PPS source ptp0
>[    3.573742] igb 0000:01:00.0: added PHC on eth0
>[    3.573743] igb 0000:01:00.0: Intel(R) Gigabit Ethernet Network Connection
>[    3.573746] igb 0000:01:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 90:49:fa:01:93:40
>[    3.573748] igb 0000:01:00.0: eth0: PBA No: FFFFFF-0FF
>[    3.573750] igb 0000:01:00.0: Using MSI-X interrupts. 2 rx queue(s), 2 tx queue(s)
>[    3.581085] igb 0000:01:00.0 enp1s0: renamed from eth0
>[    3.584699] Setting dangerous option enable_guc_loading - tainting kernel
>[    3.584703] Setting dangerous option enable_guc_submission - tainting kernel
>[    3.584846] usb-storage 2-5:1.0: USB Mass Storage device detected
>[    3.585216] [drm:i915_driver_load [i915]] No PCH found.
>[    3.585254] [drm:intel_power_domains_init [i915]] Allowed DC state mask 09
>[    3.585258] scsi host1: usb-storage 2-5:1.0
>[    3.585432] [drm:intel_device_info_dump [i915]] i915 device info: gen=9, pciid=0x5a84 rev=0x0a
>[    3.585432] usbcore: registered new interface driver usb-storage
>[    3.585465] [drm:intel_device_info_dump [i915]] i915 device info: is_mobile: no
>[    3.585502] [drm:intel_device_info_dump [i915]] i915 device info: is_i85x: no
>[    3.585536] [drm:intel_device_info_dump [i915]] i915 device info: is_i915g: no
>[    3.585570] [drm:intel_device_info_dump [i915]] i915 device info: is_i945gm: no
>[    3.585601] [drm:intel_device_info_dump [i915]] i915 device info: is_g33: no
>[    3.585633] [drm:intel_device_info_dump [i915]] i915 device info: is_g4x: no
>[    3.585666] [drm:intel_device_info_dump [i915]] i915 device info: is_pineview: no
>[    3.585698] [drm:intel_device_info_dump [i915]] i915 device info: is_broadwater: no
>[    3.585730] [drm:intel_device_info_dump [i915]] i915 device info: is_crestline: no
>[    3.585762] [drm:intel_device_info_dump [i915]] i915 device info: is_ivybridge: no
>[    3.585794] [drm:intel_device_info_dump [i915]] i915 device info: is_valleyview: no
>[    3.585826] [drm:intel_device_info_dump [i915]] i915 device info: is_cherryview: no
>[    3.585858] [drm:intel_device_info_dump [i915]] i915 device info: is_haswell: no
>[    3.585890] [drm:intel_device_info_dump [i915]] i915 device info: is_broadwell: no
>[    3.585953] [drm:intel_device_info_dump [i915]] i915 device info: is_skylake: no
>[    3.585986] [drm:intel_device_info_dump [i915]] i915 device info: is_broxton: yes
>[    3.586018] [drm:intel_device_info_dump [i915]] i915 device info: is_geminilake: no
>[    3.586050] [drm:intel_device_info_dump [i915]] i915 device info: is_kabylake: no
>[    3.586082] [drm:intel_device_info_dump [i915]] i915 device info: is_lp: yes
>[    3.586114] [drm:intel_device_info_dump [i915]] i915 device info: is_alpha_support: no
>[    3.586146] [drm:intel_device_info_dump [i915]] i915 device info: has_64bit_reloc: yes
>[    3.586177] [drm:intel_device_info_dump [i915]] i915 device info: has_csr: yes
>[    3.586209] [drm:intel_device_info_dump [i915]] i915 device info: has_ddi: yes
>[    3.586241] [drm:intel_device_info_dump [i915]] i915 device info: has_dp_mst: yes
>[    3.586274] [drm:intel_device_info_dump [i915]] i915 device info: has_fbc: yes
>[    3.586306] [drm:intel_device_info_dump [i915]] i915 device info: has_fpga_dbg: yes
>[    3.586337] [drm:intel_device_info_dump [i915]] i915 device info: has_gmbus_irq: yes
>[    3.586369] [drm:intel_device_info_dump [i915]] i915 device info: has_gmch_display: no
>[    3.586401] [drm:intel_device_info_dump [i915]] i915 device info: has_guc: yes
>[    3.586433] [drm:intel_device_info_dump [i915]] i915 device info: has_hotplug: yes
>[    3.586464] [drm:intel_device_info_dump [i915]] i915 device info: has_hw_contexts: yes
>[    3.586500] [drm:intel_device_info_dump [i915]] i915 device info: has_l3_dpf: no
>[    3.586531] [drm:intel_device_info_dump [i915]] i915 device info: has_llc: no
>[    3.586563] [drm:intel_device_info_dump [i915]] i915 device info: has_logical_ring_contexts: yes
>[    3.586595] [drm:intel_device_info_dump [i915]] i915 device info: has_overlay: no
>[    3.586626] [drm:intel_device_info_dump [i915]] i915 device info: has_pipe_cxsr: no
>[    3.586658] [drm:intel_device_info_dump [i915]] i915 device info: has_pooled_eu: no
>[    3.586690] [drm:intel_device_info_dump [i915]] i915 device info: has_psr: no
>[    3.586721] [drm:intel_device_info_dump [i915]] i915 device info: has_rc6: yes
>[    3.586753] [drm:intel_device_info_dump [i915]] i915 device info: has_rc6p: no
>[    3.586785] [drm:intel_device_info_dump [i915]] i915 device info: has_resource_streamer: yes
>[    3.586816] [drm:intel_device_info_dump [i915]] i915 device info: has_runtime_pm: yes
>[    3.586848] [drm:intel_device_info_dump [i915]] i915 device info: has_snoop: no
>[    3.586880] [drm:intel_device_info_dump [i915]] i915 device info: cursor_needs_physical: no
>[    3.586912] [drm:intel_device_info_dump [i915]] i915 device info: hws_needs_physical: no
>[    3.586943] [drm:intel_device_info_dump [i915]] i915 device info: overlay_needs_physical: no
>[    3.586975] [drm:intel_device_info_dump [i915]] i915 device info: supports_tv: no
>[    3.587007] [drm:intel_device_info_dump [i915]] i915 device info: has_decoupled_mmio: yes
>[    3.587142] [drm:intel_device_info_runtime_init [i915]] slice mask: 0001
>[    3.587175] [drm:intel_device_info_runtime_init [i915]] slice total: 1
>[    3.587206] [drm:intel_device_info_runtime_init [i915]] subslice total: 3
>[    3.587238] [drm:intel_device_info_runtime_init [i915]] subslice mask 0007
>[    3.587270] [drm:intel_device_info_runtime_init [i915]] subslice per slice: 3
>[    3.587302] [drm:intel_device_info_runtime_init [i915]] EU total: 18
>[    3.589374] [drm:intel_device_info_runtime_init [i915]] EU per subslice: 6
>[    3.589407] [drm:intel_device_info_runtime_init [i915]] has slice power gating: n
>[    3.589441] [drm:intel_device_info_runtime_init [i915]] has subslice power gating: y
>[    3.589474] [drm:intel_device_info_runtime_init [i915]] has EU power gating: y
>[    3.589510] [drm:i915_driver_load [i915]] ppgtt mode: 3
>[    3.589542] [drm:i915_driver_load [i915]] use GPU sempahores? no
>[    3.589567] usbcore: registered new interface driver uas
>[    3.589638] [drm] Memory usable by graphics device = 4096M
>[    3.589674] [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M
>[    3.591750] [drm:i915_ggtt_probe_hw [i915]] GTT stolen size = 64M
>[    3.593756] checking generic (80000000 7f0000) vs hw (80000000 10000000)
>[    3.593757] fb: switching to inteldrmfb from EFI VGA
>[    3.593792] Console: switching to colour dummy device 80x25
>[    3.593955] [drm] Replacing VGA console driver
>[    3.594038] [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K
>[    3.596210] [drm:sanitize_rc6_option [i915]] BIOS enabled RC states: HW_CTRL off HW_RC6 off SW_TARGET_STATE 4
>[    3.596366] [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x79cff018
>[    3.596420] [drm:intel_opregion_setup [i915]] Public ACPI methods supported
>[    3.596456] [drm:intel_opregion_setup [i915]] ASLE supported
>[    3.596495] [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)
>[    3.596576] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
>[    3.596577] [drm] Driver supports precise vblank timestamp query.
>[    3.596617] [drm:intel_bios_init [i915]] Set default to SSC at 100000 kHz
>[    3.596655] [drm:intel_bios_init [i915]] VBT signature "$VBT BROXTON        ", BDB version 206
>[    3.596693] [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0
>[    3.596729] [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2
>[    3.596768] [drm:intel_opregion_get_panel_type [i915]] Failed to get panel details from OpRegion (-19)
>[    3.596805] [drm:intel_bios_init [i915]] Panel type: 2 (VBT)
>[    3.596840] [drm:intel_bios_init [i915]] DRRS supported mode is static
>[    3.596877] [drm:intel_bios_init [i915]] Found panel mode in BIOS VBT tables:
>[    3.596899] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1920x1080" 0 138120 1920 1968 2018 2052 1080 1084 1086 1122 0x8 0xa
>[    3.596935] [drm:intel_bios_init [i915]] VBT initial LVDS value 30033c
>[    3.596973] [drm:intel_bios_init [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255
>[    3.597010] [drm:intel_bios_init [i915]] Unsupported child device size for SDVO mapping.
>[    3.597047] [drm:intel_bios_init [i915]] Expected child device config size for VBT version 206 not known; assuming 38
>[    3.597084] [drm:intel_bios_init [i915]] DRRS State Enabled:1
>[    3.597123] [drm:intel_bios_init [i915]] Port A VBT info: DP:1 HDMI:0 DVI:0 EDP:1 CRT:0
>[    3.597159] [drm:intel_bios_init [i915]] VBT HDMI level shift for port A: 0
>[    3.597195] [drm:intel_bios_init [i915]] Port B VBT info: DP:1 HDMI:1 DVI:1 EDP:0 CRT:0
>[    3.599254] [drm:intel_bios_init [i915]] VBT HDMI level shift for port B: 8
>[    3.599291] [drm:intel_bios_init [i915]] Port C VBT info: DP:1 HDMI:1 DVI:1 EDP:0 CRT:0
>[    3.599327] [drm:intel_bios_init [i915]] VBT HDMI level shift for port C: 8
>[    3.599434] [drm:intel_dsm_detect [i915]] no _DSM method for intel device
>[    3.599478] [drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 00
>[    3.599515] [drm:intel_power_well_enable [i915]] enabling power well 1
>[    3.599560] [drm:intel_update_cdclk [i915]] Current CD clock rate: 624000 kHz, VCO: 1248000 kHz, ref: 19200 kHz
>[    3.601618] [drm:intel_power_well_enable [i915]] enabling always-on
>[    3.601651] [drm:intel_power_well_enable [i915]] enabling DC off
>[    3.601685] [drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 00
>[    3.601721] [drm:intel_power_well_enable [i915]] enabling power well 2
>[    3.601755] [drm:intel_power_well_enable [i915]] enabling dpio-common-a
>[    3.601816] [drm:_bxt_ddi_phy_init [i915]] DDI PHY 1 already enabled, won't reprogram it
>[    3.601850] [drm:intel_power_well_enable [i915]] enabling dpio-common-bc
>[    3.601969] [drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 00
>[    3.602059] [drm:_bxt_ddi_phy_init [i915]] DDI PHY 1 already enabled, won't reprogram it
>[    3.602139] [drm:_bxt_ddi_phy_init [i915]] DDI PHY 0 already enabled, won't reprogram it
>[    3.602180] [drm:intel_csr_ucode_init [i915]] Loading i915/bxt_dmc_ver1_07.bin
>[    3.602592] [drm] Finished loading DMC firmware i915/bxt_dmc_ver1_07.bin (v1.7)
>[    3.614784] [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 0
>[    3.614836] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 7 (7.0 usec)
>[    3.614869] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 7 (7.0 usec)
>[    3.614902] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 8 (8.0 usec)
>[    3.614934] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 22 (22.0 usec)
>[    3.614967] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 22 (22.0 usec)
>[    3.614999] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 22 (22.0 usec)
>[    3.615031] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 22 (22.0 usec)
>[    3.615064] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 22 (22.0 usec)
>[    3.615102] [drm:intel_modeset_init [i915]] 3 display pipes available.
>[    3.615179] [drm:intel_update_cdclk [i915]] Current CD clock rate: 624000 kHz, VCO: 1248000 kHz, ref: 19200 kHz
>[    3.615217] [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 624000 kHz
>[    3.615252] [drm:intel_update_max_cdclk [i915]] Max dotclock rate: 624000 kHz
>[    3.615261] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
>[    3.615608] [drm:intel_ddi_init [i915]] BXT BIOS forgot to set DDI_A_4_LANES for port A; fixing
>[    3.615650] [drm:intel_dp_init_connector [i915]] Adding eDP connector on port A
>[    3.615700] [drm:intel_dp_init_connector [i915]] using AUX A for port A (VBT)
>[    3.615749] [drm:intel_pps_dump_state [i915]] cur t1_t3 0 t8 0 t9 0 t10 500 t11_t12 5000
>[    3.615784] [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000
>[    3.615821] [drm:intel_dp_init_panel_power_sequencer.part.18 [i915]] panel power up delay 200, power down delay 50, power cycle delay 500
>[    3.615855] [drm:intel_dp_init_panel_power_sequencer.part.18 [i915]] backlight on delay 1, off delay 200
>[    3.615893] [drm:intel_dp_init_panel_power_sequencer_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60
>[    3.615934] [drm:edp_panel_vdd_on [i915]] Turning eDP port A VDD on
>[    3.615971] [drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f
>[    3.618830] [drm:intel_dp_read_dpcd [i915]] DPCD: 11 0a 82 41 00 00 01 80 02 00 00 00 0f 0b 00
>[    3.622847] [drm:intel_dp_read_desc [i915]] DP sink: OUI 00-1c-f8 dev-ID b\006UA\021\001 HW-rev 10.0 SW-rev 1.8
>[    3.626993] [drm:intel_dp_init_connector [i915]] Detected EDP PSR Panel.
>[    3.630886] [drm:intel_dp_init_connector [i915]] EDP DPCD : 02 fb c7
>[    3.641704] [drm:drm_edid_to_eld [drm]] ELD: no CEA Extension found
>[    3.641746] [drm:intel_dp_init_connector [i915]] VBT doesn't support DRRS
>[    3.641786] [drm:intel_panel_setup_backlight [i915]] Connector eDP-1 backlight initialized, enabled, brightness 96000/96000
>[    3.641832] [drm:intel_dp_init_connector [i915]] Adding DP connector on port B
>[    3.641879] [drm:intel_dp_init_connector [i915]] using AUX B for port B (VBT)
>[    3.641920] [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on port B
>[    3.641994] [drm:intel_hdmi_init_connector [i915]] Using DDC pin 0x1 for port B (VBT)
>[    3.642035] [drm:intel_dp_init_connector [i915]] Adding DP connector on port C
>[    3.642074] [drm:intel_dp_init_connector [i915]] using AUX C for port C (VBT)
>[    3.642113] [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on port C
>[    3.642152] [drm:intel_hdmi_init_connector [i915]] Using DDC pin 0x2 for port C (VBT)
>[    3.642188] [drm:intel_dsi_init [i915]] 
>[    3.642260] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:33:pipe A] hw state readout: enabled
>[    3.642304] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:42:pipe B] hw state readout: disabled
>[    3.642342] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:49:pipe C] hw state readout: disabled
>[    3.642398] [drm:intel_modeset_setup_hw_state [i915]] PORT PLL A hw state readout: crtc_mask 0x00000001, on 1
>[    3.642435] [drm:intel_modeset_setup_hw_state [i915]] PORT PLL B hw state readout: crtc_mask 0x00000000, on 0
>[    3.642471] [drm:intel_modeset_setup_hw_state [i915]] PORT PLL C hw state readout: crtc_mask 0x00000000, on 0
>[    3.642524] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:50:DDI A] hw state readout: enabled, pipe A
>[    3.642561] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:58:DDI B] hw state readout: disabled, pipe A
>[    3.642598] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:60:DP-MST A] hw state readout: disabled, pipe A
>[    3.642634] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:61:DP-MST B] hw state readout: disabled, pipe B
>[    3.642669] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:62:DP-MST C] hw state readout: disabled, pipe C
>[    3.642705] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:65:DDI C] hw state readout: disabled, pipe A
>[    3.642741] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:67:DP-MST A] hw state readout: disabled, pipe A
>[    3.642777] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:68:DP-MST B] hw state readout: disabled, pipe B
>[    3.642812] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:69:DP-MST C] hw state readout: disabled, pipe C
>[    3.642852] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:51:eDP-1] hw state readout: enabled
>[    3.642889] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:59:DP-1] hw state readout: disabled
>[    3.642925] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:63:HDMI-A-1] hw state readout: disabled
>[    3.643079] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:66:DP-2] hw state readout: disabled
>[    3.643116] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:70:HDMI-A-2] hw state readout: disabled
>[    3.643179] [drm:intel_dump_pipe_config [i915]] [CRTC:33:pipe A][setup_hw_state]
>[    3.643218] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0
>[    3.643255] [drm:intel_dump_pipe_config [i915]] dp m_n: lanes: 2; gmch_m: 6436858, gmch_n: 8388608, link_m: 268202, link_n: 524288, tu: 64
>[    3.643291] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
>[    3.643326] [drm:intel_dump_pipe_config [i915]] requested mode:
>[    3.643347] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1920x1080" 60 138119 1920 1968 2018 2052 1080 1084 1086 1122 0x40 0xa
>[    3.643382] [drm:intel_dump_pipe_config [i915]] adjusted mode:
>[    3.643399] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1920x1080" 60 138119 1920 1968 2018 2052 1080 1084 1086 1122 0x40 0xa
>[    3.643435] [drm:intel_dump_pipe_config [i915]] crtc timings: 138119 1920 1968 2018 2052 1080 1084 1086 1122, type: 0x40 flags: 0xa
>[    3.643472] [drm:intel_dump_pipe_config [i915]] port clock: 270000, pipe src size: 1920x1080
>[    3.643509] [drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x80000000, scaler_id: 0
>[    3.643545] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x07800438, enabled
>[    3.643581] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
>[    3.643618] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: ebb0: 0x8100, ebb4: 0x2000,pll0: 0x1b, pll1: 0x100, pll2: 0x0, pll3: 0x0, pll6: 0x10803, pll8: 0x9, pll9: 0xa, pll10: 0x8003c00, pcsdw12: 0x4d
>[    3.643654] [drm:intel_dump_pipe_config [i915]] planes on this crtc
>[    3.643691] [drm:intel_dump_pipe_config [i915]] [PLANE:25:plane 1A] disabled, scaler_id = -1
>[    3.643727] [drm:intel_dump_pipe_config [i915]] [PLANE:27:plane 2A] disabled, scaler_id = -1
>[    3.643762] [drm:intel_dump_pipe_config [i915]] [PLANE:29:plane 3A] disabled, scaler_id = -1
>[    3.643799] [drm:intel_dump_pipe_config [i915]] [PLANE:31:cursor A] disabled, scaler_id = -1
>[    3.643838] [drm:intel_dump_pipe_config [i915]] [CRTC:42:pipe B][setup_hw_state]
>[    3.643873] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: B, pipe bpp: 0, dithering: 0
>[    3.643909] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
>[    3.643944] [drm:intel_dump_pipe_config [i915]] requested mode:
>[    3.643960] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    3.643996] [drm:intel_dump_pipe_config [i915]] adjusted mode:
>[    3.644012] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    3.644049] [drm:intel_dump_pipe_config [i915]] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[    3.644084] [drm:intel_dump_pipe_config [i915]] port clock: 0, pipe src size: 0x0
>[    3.644122] [drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: 0
>[    3.644157] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    3.644193] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
>[    3.644230] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: ebb0: 0x0, ebb4: 0x0,pll0: 0x0, pll1: 0x0, pll2: 0x0, pll3: 0x0, pll6: 0x0, pll8: 0x0, pll9: 0x0, pll10: 0x0, pcsdw12: 0x0
>[    3.644265] [drm:intel_dump_pipe_config [i915]] planes on this crtc
>[    3.644301] [drm:intel_dump_pipe_config [i915]] [PLANE:34:plane 1B] disabled, scaler_id = -1
>[    3.644337] [drm:intel_dump_pipe_config [i915]] [PLANE:36:plane 2B] disabled, scaler_id = -1
>[    3.644373] [drm:intel_dump_pipe_config [i915]] [PLANE:38:plane 3B] disabled, scaler_id = -1
>[    3.644409] [drm:intel_dump_pipe_config [i915]] [PLANE:40:cursor B] disabled, scaler_id = -1
>[    3.644447] [drm:intel_dump_pipe_config [i915]] [CRTC:49:pipe C][setup_hw_state]
>[    3.644483] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: C, pipe bpp: 0, dithering: 0
>[    3.644518] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
>[    3.644554] [drm:intel_dump_pipe_config [i915]] requested mode:
>[    3.644570] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    3.644605] [drm:intel_dump_pipe_config [i915]] adjusted mode:
>[    3.644621] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    3.644658] [drm:intel_dump_pipe_config [i915]] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[    3.644694] [drm:intel_dump_pipe_config [i915]] port clock: 0, pipe src size: 0x0
>[    3.644731] [drm:intel_dump_pipe_config [i915]] num_scalers: 1, scaler_users: 0x0, scaler_id: 0
>[    3.644767] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    3.644802] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
>[    3.644839] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: ebb0: 0x0, ebb4: 0x0,pll0: 0x0, pll1: 0x0, pll2: 0x0, pll3: 0x0, pll6: 0x0, pll8: 0x0, pll9: 0x0, pll10: 0x0, pcsdw12: 0x0
>[    3.644874] [drm:intel_dump_pipe_config [i915]] planes on this crtc
>[    3.644910] [drm:intel_dump_pipe_config [i915]] [PLANE:43:plane 1C] disabled, scaler_id = -1
>[    3.644946] [drm:intel_dump_pipe_config [i915]] [PLANE:45:plane 2C] disabled, scaler_id = -1
>[    3.644983] [drm:intel_dump_pipe_config [i915]] [PLANE:47:cursor C] disabled, scaler_id = -1
>[    3.645059] [drm:intel_power_well_disable [i915]] disabling dpio-common-bc
>[    3.645096] [drm:intel_power_well_disable [i915]] disabling power well 2
>[    3.645136] [drm:skl_set_power_well [i915]] Disabling power well 2
>[    3.645180] [drm:skylake_get_initial_plane_config [i915]] pipe A with fb: size=1920x1080@32, offset=0, pitch 7680, size 0x7e9000
>[    3.645219] [drm:i915_gem_object_create_stolen_for_preallocated [i915]] creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=7e9000
>[    3.645270] [drm:intel_alloc_initial_plane_obj.isra.126 [i915]] initial plane fb obj ffff913fe58e8000
>[    3.645311] [drm:intel_huc_init [i915]] HuC firmware pending, path i915/bxt_huc_ver01_07_1398.bin
>[    3.645348] [drm:intel_uc_fw_fetch [i915]] before requesting firmware: uC fw fetch status PENDING
>[    3.645503] [drm:intel_uc_fw_fetch [i915]] fetch uC fw from i915/bxt_huc_ver01_07_1398.bin succeeded, fw ffff913fe5f05b60
>[    3.645539] [drm:intel_uc_fw_fetch [i915]] firmware version 1.7 OK (minimum 1.7)
>[    3.645668] [drm:intel_uc_fw_fetch [i915]] uC fw fetch status SUCCESS, obj ffff913fe58e82c0
>[    3.645712] [drm:intel_guc_init [i915]] GuC firmware pending, path i915/bxt_guc_ver8_7.bin
>[    3.645751] [drm:intel_uc_fw_fetch [i915]] before requesting firmware: uC fw fetch status PENDING
>[    3.645850] [drm:intel_uc_fw_fetch [i915]] fetch uC fw from i915/bxt_guc_ver8_7.bin succeeded, fw ffff913fe5f05b60
>[    3.645886] [drm:intel_uc_fw_fetch [i915]] firmware version 8.7 OK (minimum 8.7)
>[    3.646036] [drm:intel_uc_fw_fetch [i915]] uC fw fetch status SUCCESS, obj ffff913fe58e8580
>[    3.646279] [drm:i915_gem_init_ggtt [i915]] clearing unused GTT space: [7eb000, fffff000]
>[    3.646313] [drm:i915_gem_init_ggtt [i915]] clearing unused GTT space: [7e9000, 7ea000]
>[    3.646371] [drm:i915_gem_context_init [i915]] LR context support initialized
>[    3.646424] [drm:intel_engine_create_scratch [i915]] render ring pipe control offset: 0xffffe000
>[    3.647068] [drm:gen8_init_common_ring [i915]] Execlists enabled for render ring
>[    3.647185] [drm:gen8_init_common_ring [i915]] Execlists enabled for blitter ring
>[    3.647286] [drm:gen8_init_common_ring [i915]] Execlists enabled for bsd ring
>[    3.647389] [drm:gen8_init_common_ring [i915]] Execlists enabled for video enhancement ring
>[    3.647434] [drm:intel_guc_setup [i915]] GuC fw status: path i915/bxt_guc_ver8_7.bin, fetch SUCCESS, load NONE
>[    3.647478] [drm:intel_guc_setup [i915]] GuC fw status: fetch SUCCESS, load PENDING
>[    3.647528] [drm:intel_huc_load [i915]] i915/bxt_huc_ver01_07_1398.bin fw status: fetch SUCCESS, load NONE
>[    3.649700] [drm:intel_huc_load [i915]] HuC DMA transfer wait over with ret 0
>[    3.649736] [drm:intel_huc_load [i915]] i915/bxt_huc_ver01_07_1398.bin fw status: fetch SUCCESS, load SUCCESS
>[    3.656085] [drm:guc_ucode_xfer_dma [i915]] DMA status 0x10, GuC status 0x8002f0ec
>[    3.656172] [drm:guc_ucode_xfer_dma [i915]] returning 0
>[    3.656208] [drm:intel_guc_setup [i915]] GuC fw status: fetch SUCCESS, load SUCCESS
>[    3.657946] usb 1-4: new low-speed USB device number 3 using xhci_hcd
>[    3.662105] [drm:intel_update_cdclk [i915]] Current CD clock rate: 624000 kHz, VCO: 1248000 kHz, ref: 19200 kHz
>[    3.662157] [drm:intel_fbdev_init [i915]] found possible fb from plane A
>[    3.662194] [drm:intel_fbdev_init [i915]] pipe B not active or no fb, skipping
>[    3.662229] [drm:intel_fbdev_init [i915]] pipe C not active or no fb, skipping
>[    3.662263] [drm:intel_fbdev_init [i915]] checking plane A for BIOS fb
>[    3.662301] [drm:intel_fbdev_init [i915]] pipe A area: 1920x1080, bpp: 32, size: 8294400
>[    3.662335] [drm:intel_fbdev_init [i915]] fb big enough for plane A (8294400 >= 8294400)
>[    3.662370] [drm:intel_fbdev_init [i915]] pipe B not active, skipping
>[    3.662404] [drm:intel_fbdev_init [i915]] pipe C not active, skipping
>[    3.662441] [drm:intel_fbdev_init [i915]] using BIOS fb for initial console
>[    3.662493] [drm:bxt_hpd_irq_setup [i915]] Invert bit setting: hp_ctl:18001818 hp_port:38
>[    3.662536] [drm:intel_dp_detect [i915]] [CONNECTOR:51:eDP-1]
>[    3.662575] [drm:intel_dp_detect [i915]] Display Port TPS3 support: source yes, sink no
>[    3.662612] [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000
>[    3.662647] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000
>[    3.662684] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000
>[    3.663106] [drm:intel_dp_read_desc [i915]] DP sink: OUI 00-1c-f8 dev-ID b\006UA\021\001 HW-rev 10.0 SW-rev 1.8
>[    3.663403] [drm:drm_helper_hpd_irq_event [drm_kms_helper]] [CONNECTOR:51:eDP-1] status updated from unknown to connected
>[    3.663438] [drm:intel_dp_detect [i915]] [CONNECTOR:59:DP-1]
>[    3.663473] [drm:intel_power_well_enable [i915]] enabling power well 2
>[    3.663508] [drm:skl_set_power_well [i915]] Enabling power well 2
>[    3.663549] [drm:intel_power_well_enable [i915]] enabling dpio-common-bc
>[    3.663701] [drm:intel_power_well_disable [i915]] disabling dpio-common-bc
>[    3.663742] [drm:intel_power_well_disable [i915]] disabling power well 2
>[    3.663781] [drm:skl_set_power_well [i915]] Disabling power well 2
>[    3.663790] [drm:drm_helper_hpd_irq_event [drm_kms_helper]] [CONNECTOR:59:DP-1] status updated from unknown to disconnected
>[    3.663828] [drm:intel_hdmi_detect [i915]] [CONNECTOR:63:HDMI-A-1]
>[    3.663862] [drm:intel_power_well_enable [i915]] enabling power well 2
>[    3.663896] [drm:skl_set_power_well [i915]] Enabling power well 2
>[    3.664091] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
>[    3.664126] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
>[    3.664310] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
>[    3.664335] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb
>[    3.664520] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
>[    3.664554] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
>[    3.664736] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
>[    3.664745] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[    3.664779] [drm:intel_power_well_disable [i915]] disabling power well 2
>[    3.664817] [drm:skl_set_power_well [i915]] Disabling power well 2
>[    3.664826] [drm:drm_helper_hpd_irq_event [drm_kms_helper]] [CONNECTOR:63:HDMI-A-1] status updated from unknown to disconnected
>[    3.664861] [drm:intel_dp_detect [i915]] [CONNECTOR:66:DP-2]
>[    3.664897] [drm:intel_power_well_enable [i915]] enabling power well 2
>[    3.664931] [drm:skl_set_power_well [i915]] Enabling power well 2
>[    3.664968] [drm:intel_power_well_enable [i915]] enabling dpio-common-bc
>[    3.665115] [drm:intel_power_well_disable [i915]] disabling dpio-common-bc
>[    3.665149] [drm:intel_power_well_disable [i915]] disabling power well 2
>[    3.665186] [drm:skl_set_power_well [i915]] Disabling power well 2
>[    3.665194] [drm:drm_helper_hpd_irq_event [drm_kms_helper]] [CONNECTOR:66:DP-2] status updated from unknown to disconnected
>[    3.665231] [drm:intel_hdmi_detect [i915]] [CONNECTOR:70:HDMI-A-2]
>[    3.665264] [drm:intel_power_well_enable [i915]] enabling power well 2
>[    3.665298] [drm:skl_set_power_well [i915]] Enabling power well 2
>[    3.665489] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[    3.665523] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[    3.665707] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[    3.665725] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc
>[    3.665909] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[    3.665974] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[    3.666168] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[    3.666177] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[    3.666212] [drm:intel_power_well_disable [i915]] disabling power well 2
>[    3.666256] [drm:skl_set_power_well [i915]] Disabling power well 2
>[    3.666265] [drm:drm_helper_hpd_irq_event [drm_kms_helper]] [CONNECTOR:70:HDMI-A-2] status updated from unknown to disconnected
>[    3.666604] [drm:intel_backlight_device_register [i915]] Connector eDP-1 backlight sysfs interface registered
>[    3.666644] [drm:intel_dp_connector_register [i915]] registering DPDDC-A bus for card0-eDP-1
>[    3.667037] [drm:intel_dp_connector_register [i915]] registering DPDDC-B bus for card0-DP-1
>[    3.667234] [drm:intel_dp_connector_register [i915]] registering DPDDC-C bus for card0-DP-2
>[    3.667475] [drm:intel_opregion_register [i915]] 5 outputs detected
>[    3.668630] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
>[    3.668966] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4
>[    3.669075] [drm] Initialized i915 1.6.0 20161205 for 0000:00:02.0 on minor 0
>[    3.669214] [drm:drm_setup_crtcs [drm_kms_helper]] 
>[    3.669223] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:51:eDP-1]
>[    3.669274] [drm:intel_dp_detect [i915]] [CONNECTOR:51:eDP-1]
>[    3.669313] [drm:intel_dp_detect [i915]] Display Port TPS3 support: source yes, sink no
>[    3.669351] [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000
>[    3.669386] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000
>[    3.669422] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000
>[    3.669865] [drm:intel_dp_read_desc [i915]] DP sink: OUI 00-1c-f8 dev-ID b\006UA\021\001 HW-rev 10.0 SW-rev 1.8
>[    3.670194] ------------[ cut here ]------------
>[    3.670247] WARNING: CPU: 1 PID: 6 at drivers/gpu/drm/i915/intel_dp.c:4018 intel_dp_check_link_status+0x1d7/0x200 [i915]
>[    3.670248] WARN_ON_ONCE(!intel_dp->lane_count)
>[    3.670250] Modules linked in:
>[    3.670251]  uas usb_storage i915 drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops igb drm ahci dca ptp pps_core i2c_algo_bit sdhci_pci sdhci libahci i2c_hid hid video fjes pinctrl_broxton pinctrl_intel
>[    3.670271] CPU: 1 PID: 6 Comm: kworker/u8:0 Tainted: G     U          4.9.0-rc8latestfirmware+ #1
>[    3.670272] Hardware name: Intel Corp. Broxton P/NOTEBOOK, BIOS APLKRVPA.X64.0144.B10.1606270006 06/27/2016
>[    3.670277] Workqueue: events_unbound async_run_entry_fn
>[    3.670279]  ffffba7fc18e7b38 ffffffff9a3fcfc3 ffffba7fc18e7b88 0000000000000000
>[    3.670282]  ffffba7fc18e7b78 ffffffff9a083fcb 00000fb200000000 ffff913fe61c50f0
>[    3.670285]  0000000000000001 ffff913fe5888000 ffff913fe5888258 ffff913fe61c5000
>[    3.670288] Call Trace:
>[    3.670293]  [<ffffffff9a3fcfc3>] dump_stack+0x63/0x90
>[    3.670296]  [<ffffffff9a083fcb>] __warn+0xcb/0xf0
>[    3.670298]  [<ffffffff9a08404f>] warn_slowpath_fmt+0x5f/0x80
>[    3.670308]  [<ffffffffc04014b7>] ? drm_dp_dpcd_read+0x57/0x70 [drm_kms_helper]
>[    3.670348]  [<ffffffffc04dce17>] intel_dp_check_link_status+0x1d7/0x200 [i915]
>[    3.670383]  [<ffffffffc04e31ff>] intel_dp_detect+0x6af/0xa30 [i915]
>[    3.670390]  [<ffffffffc041003f>] ? drm_fb_helper_single_add_all_connectors+0x1f/0x120 [drm_kms_helper]
>[    3.670397]  [<ffffffffc0401fcf>] drm_helper_probe_single_connector_modes+0x29f/0x510 [drm_kms_helper]
>[    3.670404]  [<ffffffffc041027b>] drm_setup_crtcs+0x7b/0x9d0 [drm_kms_helper]
>[    3.670407]  [<ffffffff9a0b9b88>] ? select_task_rq_fair+0x6c8/0x820
>[    3.670409]  [<ffffffff9a0af056>] ? _sched_setscheduler+0x76/0x90
>[    3.670417]  [<ffffffffc0410c49>] drm_fb_helper_initial_config+0x79/0x3d0 [drm_kms_helper]
>[    3.670418]  [<ffffffff9a0b0a89>] ? try_to_wake_up+0x59/0x3e0
>[    3.670453]  [<ffffffffc04d3828>] intel_fbdev_initial_config+0x18/0x30 [i915]
>[    3.670455]  [<ffffffff9a0a8637>] async_run_entry_fn+0x37/0x150
>[    3.670458]  [<ffffffff9a09ed1b>] process_one_work+0x16b/0x480
>[    3.670459]  [<ffffffff9a09f07b>] worker_thread+0x4b/0x500
>[    3.670461]  [<ffffffff9a09f030>] ? process_one_work+0x480/0x480
>[    3.670463]  [<ffffffff9a0a52d9>] kthread+0xd9/0xf0
>[    3.670465]  [<ffffffff9a0a5200>] ? kthread_park+0x60/0x60
>[    3.670467]  [<ffffffff9a86b635>] ret_from_fork+0x25/0x30
>[    3.670469] ---[ end trace d1ca328240629867 ]---
>[    3.670510] [drm:drm_edid_to_eld [drm]] ELD: no CEA Extension found
>[    3.670522] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:51:eDP-1] probed modes :
>[    3.670540] [drm:drm_mode_debug_printmodeline [drm]] Modeline 52:"1920x1080" 60 138120 1920 1968 2018 2052 1080 1084 1086 1122 0x48 0xa
>[    3.670548] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:59:DP-1]
>[    3.670585] [drm:intel_dp_detect [i915]] [CONNECTOR:59:DP-1]
>[    3.670622] [drm:intel_power_well_enable [i915]] enabling power well 2
>[    3.670657] [drm:skl_set_power_well [i915]] Enabling power well 2
>[    3.670698] [drm:intel_power_well_enable [i915]] enabling dpio-common-bc
>[    3.670814] [drm:intel_power_well_disable [i915]] disabling dpio-common-bc
>[    3.670848] [drm:intel_power_well_disable [i915]] disabling power well 2
>[    3.670887] [drm:skl_set_power_well [i915]] Disabling power well 2
>[    3.670896] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:59:DP-1] disconnected
>[    3.670903] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:63:HDMI-A-1]
>[    3.670940] [drm:intel_hdmi_detect [i915]] [CONNECTOR:63:HDMI-A-1]
>[    3.670974] [drm:intel_power_well_enable [i915]] enabling power well 2
>[    3.671013] [drm:skl_set_power_well [i915]] Enabling power well 2
>[    3.671217] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
>[    3.671252] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
>[    3.671442] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
>[    3.671461] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb
>[    3.671652] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
>[    3.671686] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
>[    3.671875] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
>[    3.671886] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[    3.671920] [drm:intel_power_well_disable [i915]] disabling power well 2
>[    3.671959] [drm:skl_set_power_well [i915]] Disabling power well 2
>[    3.671967] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:63:HDMI-A-1] disconnected
>[    3.671974] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:66:DP-2]
>[    3.672010] [drm:intel_dp_detect [i915]] [CONNECTOR:66:DP-2]
>[    3.672045] [drm:intel_power_well_enable [i915]] enabling power well 2
>[    3.672079] [drm:skl_set_power_well [i915]] Enabling power well 2
>[    3.672117] [drm:intel_power_well_enable [i915]] enabling dpio-common-bc
>[    3.672268] [drm:intel_power_well_disable [i915]] disabling dpio-common-bc
>[    3.672302] [drm:intel_power_well_disable [i915]] disabling power well 2
>[    3.672339] [drm:skl_set_power_well [i915]] Disabling power well 2
>[    3.672348] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:66:DP-2] disconnected
>[    3.672355] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:70:HDMI-A-2]
>[    3.672390] [drm:intel_hdmi_detect [i915]] [CONNECTOR:70:HDMI-A-2]
>[    3.672424] [drm:intel_power_well_enable [i915]] enabling power well 2
>[    3.672458] [drm:skl_set_power_well [i915]] Enabling power well 2
>[    3.672649] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[    3.672684] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[    3.672868] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[    3.672885] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc
>[    3.673070] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[    3.673105] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[    3.673290] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[    3.673300] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[    3.673335] [drm:intel_power_well_disable [i915]] disabling power well 2
>[    3.673372] [drm:skl_set_power_well [i915]] Disabling power well 2
>[    3.673381] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:70:HDMI-A-2] disconnected
>[    3.673389] [drm:drm_setup_crtcs [drm_kms_helper]] connector 51 enabled? yes
>[    3.673395] [drm:drm_setup_crtcs [drm_kms_helper]] connector 59 enabled? no
>[    3.673402] [drm:drm_setup_crtcs [drm_kms_helper]] connector 63 enabled? no
>[    3.673409] [drm:drm_setup_crtcs [drm_kms_helper]] connector 66 enabled? no
>[    3.673416] [drm:drm_setup_crtcs [drm_kms_helper]] connector 70 enabled? no
>[    3.673456] [drm:intel_fb_initial_config [i915]] looking for cmdline mode on connector eDP-1
>[    3.673491] [drm:intel_fb_initial_config [i915]] looking for preferred mode on connector eDP-1 0
>[    3.673528] [drm:intel_fb_initial_config [i915]] connector eDP-1 on [CRTC:33:pipe A]: 1920x1080
>[    3.673565] [drm:intel_fb_initial_config [i915]] connector DP-1 not enabled, skipping
>[    3.673599] [drm:intel_fb_initial_config [i915]] connector HDMI-A-1 not enabled, skipping
>[    3.673634] [drm:intel_fb_initial_config [i915]] connector DP-2 not enabled, skipping
>[    3.673668] [drm:intel_fb_initial_config [i915]] connector HDMI-A-2 not enabled, skipping
>[    3.673677] [drm:drm_setup_crtcs [drm_kms_helper]] desired mode 1920x1080 set on crtc 33 (0,0)
>[    3.673714] [drm:intelfb_create [i915]] re-using BIOS fb
>[    3.673757] [drm:intelfb_create [i915]] allocated 1920x1080 fb: 0x00000000
>[    3.673858] fbcon: inteldrmfb (fb0) is primary device
>[    3.674046] [drm:intel_atomic_check [i915]] [CONNECTOR:51:eDP-1] checking for sink bpp constrains
>[    3.674082] [drm:intel_atomic_check [i915]] clamping display bpp (was 36) to EDID reported max of 24
>[    3.674122] [drm:skl_update_scaler [i915]] scaler_user index 0.31: Staged freeing scaler id 0 scaler_users = 0x0
>[    3.674159] [drm:intel_dp_compute_config [i915]] DP link computation with max lane count 2 max bw 270000 pixel clock 138120KHz
>[    3.674200] [drm:intel_dp_compute_config [i915]] DP link bw 0a rate select 00 lane count 2 clock 270000 bpp 24
>[    3.674235] [drm:intel_dp_compute_config [i915]] DP link bw required 414360 available 540000
>[    3.674272] [drm:intel_atomic_check [i915]] hw max bpp: 36, pipe bpp: 24, dithering: 0
>[    3.674310] [drm:intel_dump_pipe_config [i915]] [CRTC:33:pipe A][modeset]
>[    3.674346] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0
>[    3.674383] [drm:intel_dump_pipe_config [i915]] dp m_n: lanes: 2; gmch_m: 6436858, gmch_n: 8388608, link_m: 268202, link_n: 524288, tu: 64
>[    3.674419] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
>[    3.674455] [drm:intel_dump_pipe_config [i915]] requested mode:
>[    3.674477] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1920x1080" 60 138120 1920 1968 2018 2052 1080 1084 1086 1122 0x48 0xa
>[    3.674513] [drm:intel_dump_pipe_config [i915]] adjusted mode:
>[    3.674529] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1920x1080" 60 138120 1920 1968 2018 2052 1080 1084 1086 1122 0x48 0xa
>[    3.674566] [drm:intel_dump_pipe_config [i915]] crtc timings: 138120 1920 1968 2018 2052 1080 1084 1086 1122, type: 0x48 flags: 0xa
>[    3.674601] [drm:intel_dump_pipe_config [i915]] port clock: 270000, pipe src size: 1920x1080
>[    3.674640] [drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1
>[    3.674678] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    3.674713] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
>[    3.674750] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: ebb0: 0x8100, ebb4: 0x2000,pll0: 0x1b, pll1: 0x100, pll2: 0x0, pll3: 0x0, pll6: 0x10803, pll8: 0x9, pll9: 0xa, pll10: 0x8003c00, pcsdw12: 0x4d
>[    3.674786] [drm:intel_dump_pipe_config [i915]] planes on this crtc
>[    3.674825] [drm:intel_dump_pipe_config [i915]] [PLANE:25:plane 1A] FB:72, fb = 1920x1080 format = XR24 little-endian (0x34325258)
>[    3.674861] [drm:intel_dump_pipe_config [i915]] 	scaler:-1 src 0x0+1920+1080 dst 0x0+1920+1080
>[    3.674897] [drm:intel_dump_pipe_config [i915]] [PLANE:27:plane 2A] disabled, scaler_id = -1
>[    3.674934] [drm:intel_dump_pipe_config [i915]] [PLANE:29:plane 3A] disabled, scaler_id = -1
>[    3.674971] [drm:intel_dump_pipe_config [i915]] [PLANE:31:cursor A] disabled, scaler_id = -1
>[    3.675013] [drm:intel_atomic_check [i915]] New cdclk calculated to be atomic 144000, actual 144000
>[    3.675064] [drm:bxt_get_dpll [i915]] [CRTC:33:pipe A] using pre-allocated PORT PLL A
>[    3.675102] [drm:intel_reference_shared_dpll [i915]] using PORT PLL A for pipe A
>[    3.675166] [drm:intel_edp_backlight_off.part.28 [i915]] 
>[    3.808269] usb 1-4: New USB device found, idVendor=046d, idProduct=c05a
>[    3.808271] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    3.808272] usb 1-4: Product: USB Optical Mouse
>[    3.808274] usb 1-4: Manufacturer: Logitech
>[    3.833936] tsc: Refined TSC clocksource calibration: 1094.399 MHz
>[    3.833947] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0xfc66e667aa, max_idle_ns: 440795255680 ns
>[    3.881988] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 0
>[    3.882044] [drm:intel_disable_pipe [i915]] disabling pipe A
>[    3.892475] [drm:edp_panel_off [i915]] Turn eDP port A panel power off
>[    3.894534] [drm:edp_panel_off [i915]] Wait for panel power off time
>[    3.894576] [drm:wait_panel_status [i915]] mask b0000000 value 00000000 status a0000002 control 00000060
>[    3.933930] usb 1-7: new full-speed USB device number 4 using xhci_hcd
>[    3.943033] [drm:wait_panel_status [i915]] Wait complete
>[    3.943125] [drm:intel_disable_shared_dpll [i915]] disable PORT PLL A (active 1, on? 1) for crtc 33
>[    3.943179] [drm:intel_disable_shared_dpll [i915]] disabling PORT PLL A
>[    3.943225] [drm:bxt_set_cdclk [i915]] Changing CDCLK to 144000 kHz (VCO 1152000 kHz)
>[    3.945566] [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x00000008, dig 0x1a001818, pins 0x00000010
>[    3.945603] [drm:intel_hpd_irq_handler [i915]] digital hpd port A - long
>[    3.945640] [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 0
>[    3.945696] [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP port A
>[    3.949425] [drm:intel_update_cdclk [i915]] Current CD clock rate: 144000 kHz, VCO: 1152000 kHz, ref: 19200 kHz
>[    3.949463] [drm:intel_atomic_commit_tail [i915]] [ENCODER:50:DDI A]
>[    3.949501] [drm:intel_atomic_commit_tail [i915]] [ENCODER:58:DDI B]
>[    3.949540] [drm:intel_atomic_commit_tail [i915]] [ENCODER:60:DP-MST A]
>[    3.949576] [drm:intel_atomic_commit_tail [i915]] [ENCODER:61:DP-MST B]
>[    3.949611] [drm:intel_atomic_commit_tail [i915]] [ENCODER:62:DP-MST C]
>[    3.949647] [drm:intel_atomic_commit_tail [i915]] [ENCODER:65:DDI C]
>[    3.949684] [drm:intel_atomic_commit_tail [i915]] [ENCODER:67:DP-MST A]
>[    3.949721] [drm:intel_atomic_commit_tail [i915]] [ENCODER:68:DP-MST B]
>[    3.949757] [drm:intel_atomic_commit_tail [i915]] [ENCODER:69:DP-MST C]
>[    3.949796] [drm:verify_single_dpll_state.isra.115 [i915]] PORT PLL A
>[    3.949832] [drm:verify_single_dpll_state.isra.115 [i915]] PORT PLL B
>[    3.949870] [drm:verify_single_dpll_state.isra.115 [i915]] PORT PLL C
>[    3.949923] [drm:intel_enable_shared_dpll [i915]] enable PORT PLL A (active 1, on? 0) for crtc 33
>[    3.949983] [drm:intel_enable_shared_dpll [i915]] enabling PORT PLL A
>[    3.950123] [drm:edp_panel_on [i915]] Turn eDP port A panel power on
>[    3.950159] [drm:wait_panel_power_cycle [i915]] Wait for panel power cycle
>[    4.034006] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[    4.048583] ata1.00: ATA-9: INTEL SSDSC2BW080A4, DC22, max UDMA/133
>[    4.048587] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
>[    4.074947] ata1.00: configured for UDMA/133
>[    4.075246] scsi 0:0:0:0: Direct-Access     ATA      INTEL SSDSC2BW08 DC22 PQ: 0 ANSI: 5
>[    4.075323] usb 1-7: New USB device found, idVendor=8087, idProduct=0a2a
>[    4.075325] usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    4.100652] usbcore: registered new interface driver usbhid
>[    4.100653] usbhid: USB HID core driver
>[    4.102828] input: BTC USB Multimedia Keyboard as /devices/pci0000:00/0000:00:15.0/usb1/1-2/1-2:1.0/0003:046E:550F.0001/input/input5
>[    4.118190] sd 0:0:0:0: Attached scsi generic sg0 type 0
>[    4.118195] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
>[    4.118257] sd 0:0:0:0: [sda] Write Protect is off
>[    4.118259] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[    4.118279] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    4.119488]  sda: sda1 sda2 sda3
>[    4.120058] sd 0:0:0:0: [sda] Attached SCSI disk
>[    4.162245] hid-generic 0003:046E:550F.0001: input,hidraw0: USB HID v1.10 Keyboard [BTC USB Multimedia Keyboard] on usb-0000:00:15.0-2/input0
>[    4.162965] random: fast init done
>[    4.165328] input: BTC USB Multimedia Keyboard as /devices/pci0000:00/0000:00:15.0/usb1/1-2/1-2:1.1/0003:046E:550F.0002/input/input6
>[    4.222293] hid-generic 0003:046E:550F.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [BTC USB Multimedia Keyboard] on usb-0000:00:15.0-2/input1
>[    4.222444] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:15.0/usb1/1-4/1-4:1.0/0003:046D:C05A.0003/input/input7
>[    4.222623] hid-generic 0003:046D:C05A.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:15.0-4/input0
>[    4.410102] [drm:wait_panel_status [i915]] mask b800000f value 00000000 status 08000001 control 00000060
>[    4.457423] [drm:wait_panel_status [i915]] Wait complete
>[    4.457518] [drm:edp_panel_on [i915]] Wait for panel power on
>[    4.457556] [drm:wait_panel_status [i915]] mask b000000f value 80000008 status 9000000a control 00000063
>[    4.564989] [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x00000008, dig 0x1a001818, pins 0x00000010
>[    4.565029] [drm:intel_hpd_irq_handler [i915]] digital hpd port A - long
>[    4.565066] [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 1
>[    4.565123] [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP port A
>[    4.602626] scsi 1:0:0:0: Direct-Access     ADATA    USB Flash Drive  1.00 PQ: 0 ANSI: 6
>[    4.603277] sd 1:0:0:0: Attached scsi generic sg1 type 0
>[    4.603281] sd 1:0:0:0: [sdb] 15155200 512-byte logical blocks: (7.76 GB/7.23 GiB)
>[    4.603425] sd 1:0:0:0: [sdb] Write Protect is off
>[    4.603427] sd 1:0:0:0: [sdb] Mode Sense: 23 00 00 00
>[    4.603574] sd 1:0:0:0: [sdb] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA
>[    4.605396]  sdb: sdb1
>[    4.606200] sd 1:0:0:0: [sdb] Attached SCSI removable disk
>[    4.658049] [drm:wait_panel_status [i915]] Wait complete
>[    4.658095] [drm:edp_panel_vdd_on [i915]] Turning eDP port A VDD on
>[    4.658267] [drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b
>[    4.659407] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 0
>[    4.659443] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0
>[    4.659481] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS1
>[    4.660135] [drm:intel_dp_start_link_train [i915]] clock recovery OK
>[    4.660170] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS2
>[    4.661120] [drm:intel_dp_start_link_train [i915]] Channel EQ done. DP Training successful
>[    4.661317] [drm:skylake_pfit_enable [i915]] for crtc_state = ffff913fe574b000
>[    4.661593] [drm:intel_enable_pipe [i915]] enabling pipe A
>[    4.661651] [drm:intel_edp_backlight_on.part.27 [i915]] 
>[    4.661688] [drm:intel_panel_enable_backlight [i915]] pipe A
>[    4.661726] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 96000
>[    4.670066] [drm:intel_psr_enable [i915]] PSR not supported on this platform
>[    4.670146] [drm:intel_edp_drrs_enable [i915]] Panel doesn't support DRRS
>[    4.695197] [drm:verify_connector_state.isra.83 [i915]] [CONNECTOR:51:eDP-1]
>[    4.695240] [drm:intel_atomic_commit_tail [i915]] [CRTC:33:pipe A]
>[    4.695324] [drm:verify_single_dpll_state.isra.115 [i915]] PORT PLL A
>[    4.695365] [drm:drm_fb_helper_hotplug_event [drm_kms_helper]] 
>[    4.695372] [drm:drm_setup_crtcs [drm_kms_helper]] 
>[    4.695379] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:51:eDP-1]
>[    4.695416] [drm:intel_dp_detect [i915]] [CONNECTOR:51:eDP-1]
>[    4.695456] [drm:intel_dp_detect [i915]] Display Port TPS3 support: source yes, sink no
>[    4.695492] [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000
>[    4.695528] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000
>[    4.695565] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000
>[    4.695999] [drm:intel_dp_read_desc [i915]] DP sink: OUI 00-1c-f8 dev-ID b\006UA\021\001 HW-rev 10.0 SW-rev 1.8
>[    4.696384] [drm:drm_edid_to_eld [drm]] ELD: no CEA Extension found
>[    4.696393] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:51:eDP-1] probed modes :
>[    4.696410] [drm:drm_mode_debug_printmodeline [drm]] Modeline 52:"1920x1080" 60 138120 1920 1968 2018 2052 1080 1084 1086 1122 0x48 0xa
>[    4.696417] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:59:DP-1]
>[    4.696454] [drm:intel_dp_detect [i915]] [CONNECTOR:59:DP-1]
>[    4.696491] [drm:intel_power_well_enable [i915]] enabling power well 2
>[    4.696527] [drm:skl_set_power_well [i915]] Enabling power well 2
>[    4.696601] [drm:intel_power_well_enable [i915]] enabling dpio-common-bc
>[    4.696724] [drm:intel_power_well_disable [i915]] disabling dpio-common-bc
>[    4.696758] [drm:intel_power_well_disable [i915]] disabling power well 2
>[    4.696798] [drm:skl_set_power_well [i915]] Disabling power well 2
>[    4.696807] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:59:DP-1] disconnected
>[    4.696815] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:63:HDMI-A-1]
>[    4.696851] [drm:intel_hdmi_detect [i915]] [CONNECTOR:63:HDMI-A-1]
>[    4.696884] [drm:intel_power_well_enable [i915]] enabling power well 2
>[    4.696918] [drm:skl_set_power_well [i915]] Enabling power well 2
>[    4.697126] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
>[    4.697161] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
>[    4.697356] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
>[    4.697375] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb
>[    4.697600] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
>[    4.697634] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
>[    4.697828] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
>[    4.697839] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[    4.697874] [drm:intel_power_well_disable [i915]] disabling power well 2
>[    4.697913] [drm:skl_set_power_well [i915]] Disabling power well 2
>[    4.697951] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:63:HDMI-A-1] disconnected
>[    4.697958] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:66:DP-2]
>[    4.697994] [drm:intel_dp_detect [i915]] [CONNECTOR:66:DP-2]
>[    4.698029] [drm:intel_power_well_enable [i915]] enabling power well 2
>[    4.698081] [drm:skl_set_power_well [i915]] Enabling power well 2
>[    4.698119] [drm:intel_power_well_enable [i915]] enabling dpio-common-bc
>[    4.698237] [drm:intel_power_well_disable [i915]] disabling dpio-common-bc
>[    4.698271] [drm:intel_power_well_disable [i915]] disabling power well 2
>[    4.698310] [drm:skl_set_power_well [i915]] Disabling power well 2
>[    4.698319] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:66:DP-2] disconnected
>[    4.698326] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:70:HDMI-A-2]
>[    4.698362] [drm:intel_hdmi_detect [i915]] [CONNECTOR:70:HDMI-A-2]
>[    4.698395] [drm:intel_power_well_enable [i915]] enabling power well 2
>[    4.698429] [drm:skl_set_power_well [i915]] Enabling power well 2
>[    4.698631] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[    4.698666] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[    4.698861] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[    4.698876] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc
>[    4.699105] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[    4.699140] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[    4.699334] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[    4.699342] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[    4.699375] [drm:intel_power_well_disable [i915]] disabling power well 2
>[    4.699415] [drm:skl_set_power_well [i915]] Disabling power well 2
>[    4.699423] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:70:HDMI-A-2] disconnected
>[    4.699431] [drm:drm_setup_crtcs [drm_kms_helper]] connector 51 enabled? yes
>[    4.699438] [drm:drm_setup_crtcs [drm_kms_helper]] connector 59 enabled? no
>[    4.699445] [drm:drm_setup_crtcs [drm_kms_helper]] connector 63 enabled? no
>[    4.699451] [drm:drm_setup_crtcs [drm_kms_helper]] connector 66 enabled? no
>[    4.699458] [drm:drm_setup_crtcs [drm_kms_helper]] connector 70 enabled? no
>[    4.699496] [drm:intel_fb_initial_config [i915]] looking for cmdline mode on connector eDP-1
>[    4.699532] [drm:intel_fb_initial_config [i915]] looking for preferred mode on connector eDP-1 0
>[    4.699567] [drm:intel_fb_initial_config [i915]] connector eDP-1 on [CRTC:33:pipe A]: 1920x1080
>[    4.699604] [drm:intel_fb_initial_config [i915]] connector DP-1 not enabled, skipping
>[    4.699638] [drm:intel_fb_initial_config [i915]] connector HDMI-A-1 not enabled, skipping
>[    4.699672] [drm:intel_fb_initial_config [i915]] connector DP-2 not enabled, skipping
>[    4.699707] [drm:intel_fb_initial_config [i915]] connector HDMI-A-2 not enabled, skipping
>[    4.699716] [drm:drm_setup_crtcs [drm_kms_helper]] desired mode 1920x1080 set on crtc 33 (0,0)
>[    4.711761] Console: switching to colour frame buffer device 240x67
>[    4.735520] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
>[    4.811811] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
>[    4.858106] clocksource: Switched to clocksource tsc
>[    4.890155] [drm] RC6 on
>[    4.953762] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
>[    4.954032] systemd[1]: Detected architecture x86-64.
>[    4.954342] systemd[1]: Set hostname to <BDW01-NOTEBOOK>.
>[    5.032672] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
>[    5.032847] systemd[1]: Created slice User and Session Slice.
>[    5.032903] systemd[1]: Listening on udev Kernel Socket.
>[    5.032958] systemd[1]: Listening on Syslog Socket.
>[    5.033057] systemd[1]: Listening on Journal Audit Socket.
>[    5.033095] systemd[1]: Listening on fsck to fsckd communication Socket.
>[    5.033152] systemd[1]: Listening on Journal Socket.
>[    5.070593] lp: driver loaded but no devices found
>[    5.075396] ppdev: user-space parallel port driver
>[    5.162477] EXT4-fs (sda2): re-mounted. Opts: (null)
>[    5.174980] systemd-journald[235]: Received request to flush runtime journal from PID 1
>[    5.367790] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>[    5.400334] [drm:intel_backlight_device_update_status [i915]] updating intel_backlight, brightness=96000/96000
>[    5.400362] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 96000
>[    5.419656] idma64 idma64.0: Found Intel integrated DMA 64-bit
>[    5.420338] idma64 idma64.1: Found Intel integrated DMA 64-bit
>[    5.420802] idma64 idma64.2: Found Intel integrated DMA 64-bit
>[    5.421665] idma64 idma64.3: Found Intel integrated DMA 64-bit
>[    5.422911] idma64 idma64.4: Found Intel integrated DMA 64-bit
>[    5.423229] idma64 idma64.5: Found Intel integrated DMA 64-bit
>[    5.423546] idma64 idma64.6: Found Intel integrated DMA 64-bit
>[    5.424444] idma64 idma64.7: Found Intel integrated DMA 64-bit
>[    5.424785] idma64 idma64.8: Found Intel integrated DMA 64-bit
>[    5.425090] idma64 idma64.9: Found Intel integrated DMA 64-bit
>[    5.425980] Bluetooth: Core ver 2.22
>[    5.426001] NET: Registered protocol family 31
>[    5.426002] Bluetooth: HCI device and connection manager initialized
>[    5.426006] Bluetooth: HCI socket layer initialized
>[    5.426009] Bluetooth: L2CAP socket layer initialized
>[    5.426015] Bluetooth: SCO socket layer initialized
>[    5.426612] idma64 idma64.12: Found Intel integrated DMA 64-bit
>[    5.427003] idma64 idma64.13: Found Intel integrated DMA 64-bit
>[    5.428074] idma64 idma64.14: Found Intel integrated DMA 64-bit
>[    5.438708] Intel(R) Wireless WiFi driver for Linux
>[    5.438711] Copyright(c) 2003- 2015 Intel Corporation
>[    5.438985] iwlwifi 0000:02:00.0: enabling device (0000 -> 0002)
>[    5.444556] usbcore: registered new interface driver btusb
>[    5.449562] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7265D-26.ucode failed with error -2
>[    5.449948] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7265D-25.ucode failed with error -2
>[    5.449970] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7265D-24.ucode failed with error -2
>[    5.449983] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7265D-23.ucode failed with error -2
>[    5.449996] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7265D-22.ucode failed with error -2
>[    5.450363] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7265D-21.ucode failed with error -2
>[    5.450391] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7265D-20.ucode failed with error -2
>[    5.450405] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7265D-19.ucode failed with error -2
>[    5.450418] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7265D-18.ucode failed with error -2
>[    5.450504] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7265D-17.ucode failed with error -2
>[    5.450507] iwlwifi 0000:02:00.0: no suitable firmware found!
>[    5.464220] Bluetooth: hci0: read Intel version: 370810011003110e00
>[    5.477315] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq
>[    5.547289] snd_hda_intel 0000:00:0e.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
>[    5.560153] [drm:intel_power_well_enable [i915]] enabling power well 2
>[    5.560180] [drm:skl_set_power_well [i915]] Enabling power well 2
>[    5.568569] SSE version of gcm_enc/dec engaged.
>[    5.568725] Adding 8268796k swap on /dev/sda3.  Priority:-1 extents:1 across:8268796k SSFS
>[    5.577353] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
>[    5.585553] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC298: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
>[    5.585557] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>[    5.585559] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
>[    5.585560] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
>[    5.585561] snd_hda_codec_realtek hdaudioC0D0:    inputs:
>[    5.585563] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
>[    5.612993] [drm:i915_audio_component_get_eld [i915]] Not valid for port B
>[    5.613023] [drm:i915_audio_component_get_eld [i915]] Not valid for port C
>[    5.613049] [drm:i915_audio_component_get_eld [i915]] Not valid for port D
>[    5.617289] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:0e.0/sound/card0/input8
>[    5.617369] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:0e.0/sound/card0/input9
>[    5.621691] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input10
>[    5.622831] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input11
>[    5.622929] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input12
>[    5.636291] [drm:intel_power_well_disable [i915]] disabling power well 2
>[    5.636325] [drm:skl_set_power_well [i915]] Disabling power well 2
>[    5.729837] intel_telemetry_core Init
>[    5.741925] intel_telemetry: version 1.0.0 loaded
>[    5.753879] intel_rapl: Found RAPL domain package
>[    5.753884] intel_rapl: Found RAPL domain core
>[    5.753888] intel_rapl: Found RAPL domain uncore
>[    5.753935] intel_rapl: Found RAPL domain dram
>[    5.766973] audit: type=1400 audit(1481040485.303:2): apparmor="STATUS" operation="profile_load" name="/usr/bin/ubuntu-core-launcher" pid=570 comm="apparmor_parser"
>[    5.768506] audit: type=1400 audit(1481040485.303:3): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=566 comm="apparmor_parser"
>[    5.768514] audit: type=1400 audit(1481040485.303:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=566 comm="apparmor_parser"
>[    5.768519] audit: type=1400 audit(1481040485.303:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=566 comm="apparmor_parser"
>[    5.768523] audit: type=1400 audit(1481040485.303:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=566 comm="apparmor_parser"
>[    5.780184] audit: type=1400 audit(1481040485.315:7): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cups-browsed" pid=573 comm="apparmor_parser"
>[    5.783105] audit: type=1400 audit(1481040485.319:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session" pid=565 comm="apparmor_parser"
>[    5.783114] audit: type=1400 audit(1481040485.319:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=565 comm="apparmor_parser"
>[    5.783258] audit: type=1400 audit(1481040485.319:10): apparmor="STATUS" operation="profile_load" name="webbrowser-app" pid=571 comm="apparmor_parser"
>[    5.840213] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
>[    5.914986] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
>[    5.981954] dw-apb-uart.8: ttyS4 at MMIO 0x9232c000 (irq = 4, base_baud = 115200) is a 16550A
>[    6.046732] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
>[    6.046734] Bluetooth: BNEP filters: protocol multicast
>[    6.046740] Bluetooth: BNEP socket layer initialized
>[    6.114198] dw-apb-uart.9: ttyS5 at MMIO 0x9232e000 (irq = 5, base_baud = 115200) is a 16550A
>[    6.242254] dw-apb-uart.10: ttyS6 at MMIO 0x92330000 (irq = 6, base_baud = 115200) is a 16550A
>[    6.333438] i2c_hid i2c-ELAN221D:00: hid_descr_cmd failed
>[    6.370169] dw-apb-uart.11: ttyS7 at MMIO 0x92332000 (irq = 7, base_baud = 115200) is a 16550A
>[    6.405814] [drm:drm_mode_addfb2 [drm]] [FB:74]
>[    6.406239] [drm:drm_internal_framebuffer_create [drm]] could not create framebuffer
>[    6.406276] [drm:drm_mode_addfb2 [drm]] [FB:74]
>[    6.406300] [drm:drm_mode_addfb2 [drm]] [FB:74]
>[    6.463042] [drm:drm_mode_addfb2 [drm]] [FB:74]
>[    6.481803] i2c_hid i2c-ALPS0001:00: hid_descr_cmd failed
>[    6.548665] [drm:drm_mode_setcrtc [drm]] [CRTC:33:pipe A]
>[    6.548688] [drm:drm_mode_setcrtc [drm]] [CONNECTOR:51:eDP-1]
>[    6.673447] random: crng init done
>[    7.450086] [drm:edp_panel_vdd_off_sync [i915]] Turning eDP port A VDD off
>[    7.450117] [drm:edp_panel_vdd_off_sync [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067
>[    7.450141] [drm:intel_power_well_disable [i915]] disabling DC off
>[    7.450166] [drm:gen9_enable_dc5 [i915]] Enabling DC5
>[    7.450190] [drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 01
>[    7.605459] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:51:eDP-1]
>[    7.605497] [drm:intel_dp_detect [i915]] [CONNECTOR:51:eDP-1]
>[    7.605524] [drm:intel_power_well_enable [i915]] enabling DC off
>[    7.605548] [drm:gen9_set_dc_state [i915]] Setting DC state from 01 to 00
>[    7.605622] [drm:intel_dp_detect [i915]] Display Port TPS3 support: source yes, sink no
>[    7.605649] [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000
>[    7.605675] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000
>[    7.605700] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000
>[    7.605730] [drm:edp_panel_vdd_on [i915]] Turning eDP port A VDD on
>[    7.605758] [drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f
>[    7.606415] [drm:intel_dp_read_desc [i915]] DP sink: OUI 00-1c-f8 dev-ID b\006UA\021\001 HW-rev 10.0 SW-rev 1.8
>[    7.606781] [drm:drm_edid_to_eld [drm]] ELD: no CEA Extension found
>[    7.606800] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:51:eDP-1] probed modes :
>[    7.606818] [drm:drm_mode_debug_printmodeline [drm]] Modeline 52:"1920x1080" 60 138120 1920 1968 2018 2052 1080 1084 1086 1122 0x48 0xa
>[    7.607141] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:59:DP-1]
>[    7.607177] [drm:intel_dp_detect [i915]] [CONNECTOR:59:DP-1]
>[    7.607203] [drm:intel_power_well_enable [i915]] enabling power well 2
>[    7.607228] [drm:skl_set_power_well [i915]] Enabling power well 2
>[    7.607260] [drm:intel_power_well_enable [i915]] enabling dpio-common-bc
>[    7.607380] [drm:intel_power_well_disable [i915]] disabling dpio-common-bc
>[    7.607406] [drm:intel_power_well_disable [i915]] disabling power well 2
>[    7.607436] [drm:skl_set_power_well [i915]] Disabling power well 2
>[    7.607448] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:59:DP-1] disconnected
>[    7.607466] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:66:DP-2]
>[    7.607492] [drm:intel_dp_detect [i915]] [CONNECTOR:66:DP-2]
>[    7.607516] [drm:intel_power_well_enable [i915]] enabling power well 2
>[    7.607540] [drm:skl_set_power_well [i915]] Enabling power well 2
>[    7.607570] [drm:intel_power_well_enable [i915]] enabling dpio-common-bc
>[    7.607763] [drm:intel_power_well_disable [i915]] disabling dpio-common-bc
>[    7.607787] [drm:intel_power_well_disable [i915]] disabling power well 2
>[    7.607818] [drm:skl_set_power_well [i915]] Disabling power well 2
>[    7.607831] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:66:DP-2] disconnected
>[    7.607854] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:63:HDMI-A-1]
>[    7.607881] [drm:intel_hdmi_detect [i915]] [CONNECTOR:63:HDMI-A-1]
>[    7.607905] [drm:intel_power_well_enable [i915]] enabling power well 2
>[    7.607928] [drm:skl_set_power_well [i915]] Enabling power well 2
>[    7.608174] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
>[    7.608200] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
>[    7.608377] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
>[    7.608401] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb
>[    7.608574] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
>[    7.608598] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
>[    7.608766] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
>[    7.608778] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[    7.608802] [drm:intel_power_well_disable [i915]] disabling power well 2
>[    7.608832] [drm:skl_set_power_well [i915]] Disabling power well 2
>[    7.608842] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:63:HDMI-A-1] disconnected
>[    7.609029] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:70:HDMI-A-2]
>[    7.609057] [drm:intel_hdmi_detect [i915]] [CONNECTOR:70:HDMI-A-2]
>[    7.609080] [drm:intel_power_well_enable [i915]] enabling power well 2
>[    7.609103] [drm:skl_set_power_well [i915]] Enabling power well 2
>[    7.609292] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[    7.609318] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[    7.609496] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[    7.609519] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc
>[    7.609696] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[    7.609721] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[    7.609954] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[    7.609979] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[    7.610006] [drm:intel_power_well_disable [i915]] disabling power well 2
>[    7.610039] [drm:skl_set_power_well [i915]] Disabling power well 2
>[    7.610055] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:70:HDMI-A-2] disconnected
>[    7.614557] igb 0000:01:00.0 enp1s0: igb: enp1s0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
>[    7.614808] IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0: link becomes ready
>[    7.639826] [drm:intel_power_well_enable [i915]] enabling power well 2
>[    7.639853] [drm:skl_set_power_well [i915]] Enabling power well 2
>[    7.640472] [drm:i915_audio_component_get_eld [i915]] Not valid for port B
>[    7.640503] [drm:i915_audio_component_get_eld [i915]] Not valid for port C
>[    7.640530] [drm:i915_audio_component_get_eld [i915]] Not valid for port D
>[    7.642044] [drm:i915_audio_component_sync_audio_rate [i915]] Not valid for port B
>[    8.662045] [drm:i915_audio_component_sync_audio_rate [i915]] Not valid for port B
>[    8.665010] [drm:i915_audio_component_sync_audio_rate [i915]] Not valid for port B
>[    8.678368] [drm:i915_audio_component_sync_audio_rate [i915]] Not valid for port B
>[    8.681185] [drm:i915_audio_component_sync_audio_rate [i915]] Not valid for port B
>[    8.694298] [drm:i915_audio_component_sync_audio_rate [i915]] Not valid for port B
>[    8.697048] [drm:i915_audio_component_sync_audio_rate [i915]] Not valid for port C
>[    8.710286] [drm:i915_audio_component_sync_audio_rate [i915]] Not valid for port C
>[    8.713103] [drm:i915_audio_component_sync_audio_rate [i915]] Not valid for port C
>[    8.726279] [drm:i915_audio_component_sync_audio_rate [i915]] Not valid for port C
>[    8.729038] [drm:i915_audio_component_sync_audio_rate [i915]] Not valid for port C
>[    8.742277] [drm:i915_audio_component_sync_audio_rate [i915]] Not valid for port C
>[    8.745153] [drm:i915_audio_component_sync_audio_rate [i915]] Not valid for port D
>[    8.758391] [drm:i915_audio_component_sync_audio_rate [i915]] Not valid for port D
>[    8.761297] [drm:i915_audio_component_sync_audio_rate [i915]] Not valid for port D
>[    8.774316] [drm:i915_audio_component_sync_audio_rate [i915]] Not valid for port D
>[    8.777008] [drm:i915_audio_component_sync_audio_rate [i915]] Not valid for port D
>[    8.790353] [drm:i915_audio_component_sync_audio_rate [i915]] Not valid for port D
>[    8.852244] Bluetooth: RFCOMM TTY layer initialized
>[    8.852256] Bluetooth: RFCOMM socket layer initialized
>[    8.852263] Bluetooth: RFCOMM ver 1.11
>[   10.266115] [drm:edp_panel_vdd_off_sync [i915]] Turning eDP port A VDD off
>[   10.266147] [drm:edp_panel_vdd_off_sync [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067
>[   12.058183] [drm:intel_power_well_disable [i915]] disabling power well 2
>[   12.058228] [drm:skl_set_power_well [i915]] Disabling power well 2
>[   12.058252] [drm:intel_power_well_disable [i915]] disabling DC off
>[   12.058279] [drm:gen9_enable_dc5 [i915]] Enabling DC5
>[   12.058306] [drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 01
>[   15.308541] [drm:drm_mode_addfb2 [drm]] [FB:75]
>[   16.641667] [drm:drm_mode_addfb2 [drm]] [FB:78]
>[   17.072673] [drm:intel_power_well_enable [i915]] enabling DC off
>[   17.072701] [drm:gen9_set_dc_state [i915]] Setting DC state from 01 to 00
>[   17.072759] [drm:intel_power_well_enable [i915]] enabling power well 2
>[   17.072783] [drm:skl_set_power_well [i915]] Enabling power well 2
>[   17.073293] [drm:i915_audio_component_get_eld [i915]] Not valid for port B
>[   17.073324] [drm:i915_audio_component_get_eld [i915]] Not valid for port C
>[   17.073351] [drm:i915_audio_component_get_eld [i915]] Not valid for port D
>[   17.074869] [drm:i915_audio_component_sync_audio_rate [i915]] Not valid for port B
>[   17.086917] [drm:i915_audio_component_sync_audio_rate [i915]] Not valid for port B
>[   17.091420] [drm:i915_audio_component_sync_audio_rate [i915]] Not valid for port B
>[   17.122048] [drm:i915_audio_component_sync_audio_rate [i915]] Not valid for port B
>[   17.134107] [drm:i915_audio_component_sync_audio_rate [i915]] Not valid for port B
>[   17.146309] [drm:i915_audio_component_sync_audio_rate [i915]] Not valid for port B
>[   17.150718] [drm:i915_audio_component_sync_audio_rate [i915]] Not valid for port C
>[   17.151089] [drm:drm_mode_addfb2 [drm]] [FB:73]
>[   17.162300] [drm:i915_audio_component_sync_audio_rate [i915]] Not valid for port C
>[   17.168302] [drm:i915_audio_component_sync_audio_rate [i915]] Not valid for port C
>[   17.178295] [drm:i915_audio_component_sync_audio_rate [i915]] Not valid for port C
>[   17.182423] [drm:i915_audio_component_sync_audio_rate [i915]] Not valid for port C
>[   17.196872] [drm:i915_audio_component_sync_audio_rate [i915]] Not valid for port C
>[   17.200173] [drm:i915_audio_component_sync_audio_rate [i915]] Not valid for port D
>[   17.210335] [drm:i915_audio_component_sync_audio_rate [i915]] Not valid for port D
>[   17.213650] [drm:i915_audio_component_sync_audio_rate [i915]] Not valid for port D
>[   17.230272] [drm:i915_audio_component_sync_audio_rate [i915]] Not valid for port D
>[   17.233430] [drm:i915_audio_component_sync_audio_rate [i915]] Not valid for port D
>[   17.246314] [drm:i915_audio_component_sync_audio_rate [i915]] Not valid for port D
>[   19.274632] [drm:drm_mode_addfb2 [drm]] [FB:79]
>[   20.858167] [drm:intel_power_well_disable [i915]] disabling power well 2
>[   20.858270] [drm:skl_set_power_well [i915]] Disabling power well 2
>[   20.858294] [drm:intel_power_well_disable [i915]] disabling DC off
>[   20.858321] [drm:gen9_enable_dc5 [i915]] Enabling DC5
>[   20.858347] [drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 01
>[   98.589778] PM: Syncing filesystems ... 
>[   98.600393] done.
>[   98.600395] Freezing user space processes ... (elapsed 0.003 seconds) done.
>[   98.604676] PM: Marking nosave pages: [mem 0x00000000-0x00000fff]
>[   98.604679] PM: Marking nosave pages: [mem 0x00058000-0x00058fff]
>[   98.604680] PM: Marking nosave pages: [mem 0x0009f000-0x000fffff]
>[   98.604682] PM: Marking nosave pages: [mem 0x0f000000-0x12151fff]
>[   98.604872] PM: Marking nosave pages: [mem 0x77f06000-0x79d55fff]
>[   98.604990] PM: Marking nosave pages: [mem 0x7ac27000-0x7ac51fff]
>[   98.604991] PM: Marking nosave pages: [mem 0x7b000000-0xffffffff]
>[   98.606879] PM: Basic memory bitmaps created
>[   98.606920] PM: Preallocating image memory... 
>[   99.471766] hpet_rtc_timer_reinit: 36 callbacks suppressed
>[   99.471768] hpet1: lost 7161 rtc interrupts
>[  100.397547] hpet1: lost 7161 rtc interrupts
>[  101.323022] hpet1: lost 7161 rtc interrupts
>[  101.349907] done (allocated 434751 pages)
>[  101.349910] PM: Allocated 1739004 kbytes in 2.74 seconds (634.67 MB/s)
>[  101.350019] Freezing remaining freezable tasks ... (elapsed 0.013 seconds) done.
>[  102.233525] hpet1: lost 7161 rtc interrupts
>[  103.143783] hpet1: lost 7161 rtc interrupts
>[  103.742282] Suspending console(s) (use no_console_suspend to debug)
>[  103.762606] [drm:intel_power_well_enable [i915]] enabling DC off
>[  103.762631] [drm:gen9_set_dc_state [i915]] Setting DC state from 01 to 00
>[  103.762673] [drm:intel_power_well_enable [i915]] enabling power well 2
>[  103.762697] [drm:skl_set_power_well [i915]] Enabling power well 2
>[  103.762727] [drm:intel_power_well_enable [i915]] enabling dpio-common-bc
>[  103.787869] [drm] INTEL_GUC_SEND: Action 0x501 failed; ret=-110 status=0x00000501 response=0x00000000
>[  103.787948] [drm:intel_atomic_check [i915]] [CONNECTOR:51:eDP-1] checking for sink bpp constrains
>[  103.787975] [drm:intel_atomic_check [i915]] clamping display bpp (was 36) to EDID reported max of 24
>[  103.788006] [drm:intel_dp_compute_config [i915]] DP link computation with max lane count 2 max bw 270000 pixel clock 138120KHz
>[  103.788038] [drm:intel_dp_compute_config [i915]] DP link bw 0a rate select 00 lane count 2 clock 270000 bpp 24
>[  103.788062] [drm:intel_dp_compute_config [i915]] DP link bw required 414360 available 540000
>[  103.788091] [drm:intel_atomic_check [i915]] hw max bpp: 36, pipe bpp: 24, dithering: 0
>[  103.788119] [drm:intel_dump_pipe_config [i915]] [CRTC:33:pipe A][modeset]
>[  103.788147] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0
>[  103.788174] [drm:intel_dump_pipe_config [i915]] dp m_n: lanes: 2; gmch_m: 6436858, gmch_n: 8388608, link_m: 268202, link_n: 524288, tu: 64
>[  103.788200] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
>[  103.788225] [drm:intel_dump_pipe_config [i915]] requested mode:
>[  103.788247] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1920x1080" 60 138120 1920 1968 2018 2052 1080 1084 1086 1122 0x0 0xa
>[  103.788273] [drm:intel_dump_pipe_config [i915]] adjusted mode:
>[  103.788289] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1920x1080" 60 138120 1920 1968 2018 2052 1080 1084 1086 1122 0x48 0xa
>[  103.788316] [drm:intel_dump_pipe_config [i915]] crtc timings: 138120 1920 1968 2018 2052 1080 1084 1086 1122, type: 0x48 flags: 0xa
>[  103.788342] [drm:intel_dump_pipe_config [i915]] port clock: 270000, pipe src size: 1920x1080
>[  103.788369] [drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1
>[  103.788395] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[  103.788421] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
>[  103.788448] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: ebb0: 0x8100, ebb4: 0x2000,pll0: 0x1b, pll1: 0x100, pll2: 0x0, pll3: 0x0, pll6: 0x10803, pll8: 0x9, pll9: 0xa, pll10: 0x8003c00, pcsdw12: 0x4d
>[  103.788473] [drm:intel_dump_pipe_config [i915]] planes on this crtc
>[  103.788503] [drm:intel_dump_pipe_config [i915]] [PLANE:25:plane 1A] FB:73, fb = 1920x1080 format = XR24 little-endian (0x34325258)
>[  103.788530] [drm:intel_dump_pipe_config [i915]] 	scaler:-1 src 0x0+1920+1080 dst 0x0+1920+1080
>[  103.788556] [drm:intel_dump_pipe_config [i915]] [PLANE:27:plane 2A] disabled, scaler_id = -1
>[  103.788582] [drm:intel_dump_pipe_config [i915]] [PLANE:29:plane 3A] disabled, scaler_id = -1
>[  103.788608] [drm:intel_dump_pipe_config [i915]] [PLANE:31:cursor A] disabled, scaler_id = -1
>[  103.788639] [drm:intel_atomic_check [i915]] New cdclk calculated to be atomic 144000, actual 144000
>[  103.788676] [drm:bxt_get_dpll [i915]] [CRTC:33:pipe A] using pre-allocated PORT PLL A
>[  103.788702] [drm:intel_reference_shared_dpll [i915]] using PORT PLL A for pipe A
>[  103.789606] [drm:intel_edp_backlight_off.part.28 [i915]] 
>[  103.795210] igb 0000:01:00.0: System wakeup enabled by ACPI
>[  103.993881] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 0
>[  103.993915] [drm:intel_disable_pipe [i915]] disabling pipe A
>[  104.010051] [drm:edp_panel_vdd_on [i915]] Turning eDP port A VDD on
>[  104.010080] [drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b
>[  104.010252] [drm:edp_panel_off [i915]] Turn eDP port A panel power off
>[  104.010277] [drm:edp_panel_off [i915]] Wait for panel power off time
>[  104.010308] [drm:wait_panel_status [i915]] mask b0000000 value 00000000 status a0000003 control 00000060
>[  104.059584] hpet1: lost 7161 rtc interrupts
>[  104.060489] [drm:wait_panel_status [i915]] Wait complete
>[  104.060519] [drm:intel_disable_shared_dpll [i915]] disable PORT PLL A (active 1, on? 1) for crtc 33
>[  104.060563] [drm:intel_disable_shared_dpll [i915]] disabling PORT PLL A
>[  104.060602] [drm:intel_atomic_commit_tail [i915]] [ENCODER:50:DDI A]
>[  104.060630] [drm:intel_atomic_commit_tail [i915]] [ENCODER:58:DDI B]
>[  104.060660] [drm:intel_atomic_commit_tail [i915]] [ENCODER:60:DP-MST A]
>[  104.060686] [drm:intel_atomic_commit_tail [i915]] [ENCODER:61:DP-MST B]
>[  104.060712] [drm:intel_atomic_commit_tail [i915]] [ENCODER:62:DP-MST C]
>[  104.060738] [drm:intel_atomic_commit_tail [i915]] [ENCODER:65:DDI C]
>[  104.060766] [drm:intel_atomic_commit_tail [i915]] [ENCODER:67:DP-MST A]
>[  104.060792] [drm:intel_atomic_commit_tail [i915]] [ENCODER:68:DP-MST B]
>[  104.060818] [drm:intel_atomic_commit_tail [i915]] [ENCODER:69:DP-MST C]
>[  104.060844] [drm:verify_single_dpll_state.isra.115 [i915]] PORT PLL A
>[  104.060871] [drm:verify_single_dpll_state.isra.115 [i915]] PORT PLL B
>[  104.060898] [drm:verify_single_dpll_state.isra.115 [i915]] PORT PLL C
>[  104.060930] [drm:verify_connector_state.isra.83 [i915]] [CONNECTOR:51:eDP-1]
>[  104.060959] [drm:intel_atomic_commit_tail [i915]] [CRTC:33:pipe A]
>[  104.060990] [drm:verify_single_dpll_state.isra.115 [i915]] PORT PLL A
>[  104.100596] ACPI : EC: event blocked
>[  104.137970] PM: freeze of devices complete after 395.574 msecs
>[  104.247663] [drm:intel_power_well_disable [i915]] disabling dpio-common-bc
>[  104.247688] [drm:intel_power_well_disable [i915]] disabling dpio-common-a
>[  104.247712] [drm:intel_power_well_disable [i915]] disabling power well 2
>[  104.247742] [drm:skl_set_power_well [i915]] Disabling power well 2
>[  104.247765] [drm:intel_power_well_disable [i915]] disabling DC off
>[  104.247793] [drm:gen9_enable_dc5 [i915]] Enabling DC5
>[  104.247819] [drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 01
>[  104.247844] [drm:intel_power_well_disable [i915]] disabling always-on
>[  104.248348] [drm:gen9_set_dc_state [i915]] Setting DC state from 01 to 00
>[  104.248390] [drm:bxt_set_cdclk [i915]] Changing CDCLK to 19200 kHz (VCO 0 kHz)
>[  104.252457] [drm:intel_update_cdclk [i915]] Current CD clock rate: 19200 kHz, VCO: 0 kHz, ref: 19200 kHz
>[  104.252480] [drm:intel_power_well_disable [i915]] disabling power well 1
>[  104.252509] [drm:skl_set_power_well [i915]] Disabling power well 1
>[  104.252536] [drm:skl_set_power_well [i915]] Clearing auxiliary requests for power well 1 forced on by DMC
>[  104.252567] [drm:bxt_enable_dc9 [i915]] Enabling DC9
>[  104.252592] [drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 08
>[  104.270131] PM: late freeze of devices complete after 132.050 msecs
>[  104.271164] ACPI : EC: interrupt blocked
>[  104.289991] PM: noirq freeze of devices complete after 19.854 msecs
>[  104.290202] ACPI: Preparing to enter system sleep state S4
>[  104.291060] ACPI : EC: EC stopped
>[  104.291061] PM: Saving platform NVS memory
>[  104.291647] Disabling non-boot CPUs ...
>[  104.292263] Broke affinity for irq 122
>[  104.292313] Cannot set affinity for irq 351
>[  104.292318] Broke affinity for irq 373
>[  104.293381] smpboot: CPU 1 is now offline
>[  104.307398] Broke affinity for irq 122
>[  104.307453] Broke affinity for irq 373
>[  104.307455] Broke affinity for irq 374
>[  104.308507] smpboot: CPU 2 is now offline
>[  104.331403] Broke affinity for irq 1
>[  104.331434] Broke affinity for irq 8
>[  104.331443] Broke affinity for irq 9
>[  104.331580] Broke affinity for irq 122
>[  104.331647] Broke affinity for irq 373
>[  104.331650] Broke affinity for irq 374
>[  104.332720] smpboot: CPU 3 is now offline
>[  104.352487] PM: Creating hibernation image:
>[  105.430093] PM: Need to copy 433275 pages
>[  105.430100] PM: Normal pages needed: 433275 + 1024, available pages: 3719710
>[  104.352861] PM: Restoring platform NVS memory
>[  104.352975] ACPI : EC: EC started
>[  104.353872] Suspended for 222.107 seconds
>[  104.354017] Enabling non-boot CPUs ...
>[  104.364893] x86: Booting SMP configuration:
>[  104.364895] smpboot: Booting Node 0 Processor 1 APIC 0x2
>[  104.367634]  cache: parent cpu1 should not be sleeping
>[  104.368277] CPU1 is up
>[  104.381034] smpboot: Booting Node 0 Processor 2 APIC 0x4
>[  104.383881]  cache: parent cpu2 should not be sleeping
>[  104.384854] CPU2 is up
>[  104.401135] smpboot: Booting Node 0 Processor 3 APIC 0x6
>[  104.404059]  cache: parent cpu3 should not be sleeping
>[  104.405197] CPU3 is up
>[  104.408424] ACPI: Waking up from system sleep state S4
>[  104.415875] ACPI : button: The lid device is not compliant to SW_LID.
>[  104.417393] acpi LNXPOWER:14: Turning OFF
>[  104.419180] ACPI : EC: interrupt unblocked
>[  104.460861] PM: noirq restore of devices complete after 42.097 msecs
>[  104.461185] [drm:gen9_sanitize_dc_state [i915]] Resetting DC state tracking from 08 to 08
>[  104.461224] [drm:bxt_disable_dc9 [i915]] Disabling DC9
>[  104.461261] [drm:gen9_set_dc_state [i915]] Setting DC state from 08 to 00
>[  104.461314] [drm:sanitize_rc6_option [i915]] BIOS enabled RC states: HW_CTRL on HW_RC6 on SW_TARGET_STATE 0
>[  104.461523] [drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 00
>[  104.461569] [drm:intel_power_well_enable [i915]] enabling power well 1
>[  104.461610] [drm:skl_set_power_well [i915]] Enabling power well 1
>[  104.461658] [drm:intel_update_cdclk [i915]] Current CD clock rate: 19200 kHz, VCO: 0 kHz, ref: 19200 kHz
>[  104.461700] [drm:bxt_init_cdclk [i915]] Sanitizing cdclk programmed by pre-os
>[  104.461742] [drm:bxt_set_cdclk [i915]] Changing CDCLK to 144000 kHz (VCO 1152000 kHz)
>[  104.467883] [drm:intel_update_cdclk [i915]] Current CD clock rate: 144000 kHz, VCO: 1152000 kHz, ref: 19200 kHz
>[  104.468289] [drm:intel_power_well_enable [i915]] enabling always-on
>[  104.468339] [drm:intel_power_well_enable [i915]] enabling DC off
>[  104.468392] [drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 00
>[  104.468446] [drm:intel_power_well_enable [i915]] enabling power well 2
>[  104.468496] [drm:skl_set_power_well [i915]] Enabling power well 2
>[  104.468555] [drm:intel_power_well_enable [i915]] enabling dpio-common-a
>[  104.468698] [drm:intel_power_well_enable [i915]] enabling dpio-common-bc
>[  104.468837] [drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 00
>[  104.468958] [drm:_bxt_ddi_phy_init [i915]] DDI PHY 1 already enabled, won't reprogram it
>[  104.469057] [drm:_bxt_ddi_phy_init [i915]] DDI PHY 0 already enabled, won't reprogram it
>[  104.469225] PM: early restore of devices complete after 8.181 msecs
>[  104.598424] ACPI : EC: event unblocked
>[  104.598509] usb usb1: root hub lost power or was reset
>[  104.598511] usb usb2: root hub lost power or was reset
>[  104.599862] igb 0000:01:00.0: System wakeup disabled by ACPI
>[  104.600085] rtc_cmos 00:04: System wakeup disabled by ACPI
>[  104.600416] [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x79cff018
>[  104.600476] [drm:intel_opregion_setup [i915]] Public ACPI methods supported
>[  104.600500] [drm:intel_opregion_setup [i915]] ASLE supported
>[  104.600528] [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)
>[  104.600635] [drm:intel_dp_init_panel_power_sequencer_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60
>[  104.600662] [drm:intel_dp_init_panel_power_sequencer_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60
>[  104.600782] [drm:gen8_init_common_ring [i915]] Execlists enabled for render ring
>[  104.600904] [drm:gen8_init_common_ring [i915]] Execlists enabled for blitter ring
>[  104.601010] [drm:gen8_init_common_ring [i915]] Execlists enabled for bsd ring
>[  104.601113] [drm:gen8_init_common_ring [i915]] Execlists enabled for video enhancement ring
>[  104.601148] [drm:intel_guc_setup [i915]] GuC fw status: path i915/bxt_guc_ver8_7.bin, fetch SUCCESS, load SUCCESS
>[  104.601201] [drm:intel_guc_setup [i915]] GuC fw status: fetch SUCCESS, load PENDING
>[  104.601244] [drm:intel_huc_load [i915]] i915/bxt_huc_ver01_07_1398.bin fw status: fetch SUCCESS, load SUCCESS
>[  104.603350] [drm:intel_huc_load [i915]] HuC DMA transfer wait over with ret 0
>[  104.603376] [drm:intel_huc_load [i915]] i915/bxt_huc_ver01_07_1398.bin fw status: fetch SUCCESS, load SUCCESS
>[  104.606585] [drm:i915_audio_component_get_eld [i915]] Not valid for port B
>[  104.606616] [drm:i915_audio_component_get_eld [i915]] Not valid for port C
>[  104.606643] [drm:i915_audio_component_get_eld [i915]] Not valid for port D
>[  104.608651] sd 0:0:0:0: [sda] Starting disk
>[  104.613647] [drm:guc_ucode_xfer_dma [i915]] DMA status 0x10, GuC status 0x8002f0ec
>[  104.613672] [drm:guc_ucode_xfer_dma [i915]] returning 0
>[  104.613699] [drm:intel_guc_setup [i915]] GuC fw status: fetch SUCCESS, load SUCCESS
>[  104.633854] [drm] INTEL_GUC_SEND: Action 0x502 failed; ret=-110 status=0x00000502 response=0x40000000
>[  104.633896] [drm:intel_update_cdclk [i915]] Current CD clock rate: 144000 kHz, VCO: 1152000 kHz, ref: 19200 kHz
>[  104.633931] [drm:bxt_hpd_irq_setup [i915]] Invert bit setting: hp_ctl:1a001818 hp_port:38
>[  104.633973] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:33:pipe A] hw state readout: disabled
>[  104.634003] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:42:pipe B] hw state readout: disabled
>[  104.634032] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:49:pipe C] hw state readout: disabled
>[  104.634063] [drm:intel_modeset_setup_hw_state [i915]] PORT PLL A hw state readout: crtc_mask 0x00000000, on 0
>[  104.634090] [drm:intel_modeset_setup_hw_state [i915]] PORT PLL B hw state readout: crtc_mask 0x00000000, on 0
>[  104.634117] [drm:intel_modeset_setup_hw_state [i915]] PORT PLL C hw state readout: crtc_mask 0x00000000, on 0
>[  104.634147] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:50:DDI A] hw state readout: disabled, pipe A
>[  104.634177] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:58:DDI B] hw state readout: disabled, pipe A
>[  104.634204] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:60:DP-MST A] hw state readout: disabled, pipe A
>[  104.634230] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:61:DP-MST B] hw state readout: disabled, pipe B
>[  104.634256] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:62:DP-MST C] hw state readout: disabled, pipe C
>[  104.634284] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:65:DDI C] hw state readout: disabled, pipe A
>[  104.634310] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:67:DP-MST A] hw state readout: disabled, pipe A
>[  104.634337] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:68:DP-MST B] hw state readout: disabled, pipe B
>[  104.634363] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:69:DP-MST C] hw state readout: disabled, pipe C
>[  104.634394] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:51:eDP-1] hw state readout: disabled
>[  104.634422] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:59:DP-1] hw state readout: disabled
>[  104.634450] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:63:HDMI-A-1] hw state readout: disabled
>[  104.634477] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:66:DP-2] hw state readout: disabled
>[  104.634506] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:70:HDMI-A-2] hw state readout: disabled
>[  104.634536] [drm:intel_dump_pipe_config [i915]] [CRTC:33:pipe A][setup_hw_state]
>[  104.634565] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: A, pipe bpp: 0, dithering: 0
>[  104.634591] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
>[  104.634617] [drm:intel_dump_pipe_config [i915]] requested mode:
>[  104.634642] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[  104.634668] [drm:intel_dump_pipe_config [i915]] adjusted mode:
>[  104.634684] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[  104.634711] [drm:intel_dump_pipe_config [i915]] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[  104.634736] [drm:intel_dump_pipe_config [i915]] port clock: 0, pipe src size: 0x0
>[  104.634763] [drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: 0
>[  104.634789] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[  104.634815] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
>[  104.634844] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: ebb0: 0x0, ebb4: 0x0,pll0: 0x0, pll1: 0x0, pll2: 0x0, pll3: 0x0, pll6: 0x0, pll8: 0x0, pll9: 0x0, pll10: 0x0, pcsdw12: 0x0
>[  104.634870] [drm:intel_dump_pipe_config [i915]] planes on this crtc
>[  104.634899] [drm:intel_dump_pipe_config [i915]] [PLANE:25:plane 1A] FB:73, fb = 1920x1080 format = XR24 little-endian (0x34325258)
>[  104.634925] [drm:intel_dump_pipe_config [i915]] 	scaler:-1 src 0x0+1920+1080 dst 0x0+1920+1080
>[  104.634953] [drm:intel_dump_pipe_config [i915]] [PLANE:27:plane 2A] disabled, scaler_id = -1
>[  104.634980] [drm:intel_dump_pipe_config [i915]] [PLANE:29:plane 3A] disabled, scaler_id = -1
>[  104.635008] [drm:intel_dump_pipe_config [i915]] [PLANE:31:cursor A] disabled, scaler_id = -1
>[  104.635035] [drm:intel_dump_pipe_config [i915]] [CRTC:42:pipe B][setup_hw_state]
>[  104.635061] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: B, pipe bpp: 0, dithering: 0
>[  104.635087] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
>[  104.635112] [drm:intel_dump_pipe_config [i915]] requested mode:
>[  104.635128] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[  104.635154] [drm:intel_dump_pipe_config [i915]] adjusted mode:
>[  104.635169] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[  104.635196] [drm:intel_dump_pipe_config [i915]] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[  104.635222] [drm:intel_dump_pipe_config [i915]] port clock: 0, pipe src size: 0x0
>[  104.635248] [drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: 0
>[  104.635274] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[  104.635300] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
>[  104.635326] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: ebb0: 0x0, ebb4: 0x0,pll0: 0x0, pll1: 0x0, pll2: 0x0, pll3: 0x0, pll6: 0x0, pll8: 0x0, pll9: 0x0, pll10: 0x0, pcsdw12: 0x0
>[  104.635352] [drm:intel_dump_pipe_config [i915]] planes on this crtc
>[  104.635378] [drm:intel_dump_pipe_config [i915]] [PLANE:34:plane 1B] disabled, scaler_id = -1
>[  104.635404] [drm:intel_dump_pipe_config [i915]] [PLANE:36:plane 2B] disabled, scaler_id = -1
>[  104.635431] [drm:intel_dump_pipe_config [i915]] [PLANE:38:plane 3B] disabled, scaler_id = -1
>[  104.635457] [drm:intel_dump_pipe_config [i915]] [PLANE:40:cursor B] disabled, scaler_id = -1
>[  104.635484] [drm:intel_dump_pipe_config [i915]] [CRTC:49:pipe C][setup_hw_state]
>[  104.635511] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: C, pipe bpp: 0, dithering: 0
>[  104.635537] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
>[  104.635562] [drm:intel_dump_pipe_config [i915]] requested mode:
>[  104.635578] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[  104.635604] [drm:intel_dump_pipe_config [i915]] adjusted mode:
>[  104.635619] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[  104.635646] [drm:intel_dump_pipe_config [i915]] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[  104.635672] [drm:intel_dump_pipe_config [i915]] port clock: 0, pipe src size: 0x0
>[  104.635698] [drm:intel_dump_pipe_config [i915]] num_scalers: 1, scaler_users: 0x0, scaler_id: 0
>[  104.635724] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[  104.635749] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
>[  104.635776] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: ebb0: 0x0, ebb4: 0x0,pll0: 0x0, pll1: 0x0, pll2: 0x0, pll3: 0x0, pll6: 0x0, pll8: 0x0, pll9: 0x0, pll10: 0x0, pcsdw12: 0x0
>[  104.635801] [drm:intel_dump_pipe_config [i915]] planes on this crtc
>[  104.635827] [drm:intel_dump_pipe_config [i915]] [PLANE:43:plane 1C] disabled, scaler_id = -1
>[  104.635855] [drm:intel_dump_pipe_config [i915]] [PLANE:45:plane 2C] disabled, scaler_id = -1
>[  104.635885] [drm:intel_dump_pipe_config [i915]] [PLANE:47:cursor C] disabled, scaler_id = -1
>[  104.635960] [drm:intel_power_well_disable [i915]] disabling dpio-common-bc
>[  104.635985] [drm:intel_power_well_disable [i915]] disabling dpio-common-a
>[  104.636025] [drm:intel_atomic_check [i915]] [CONNECTOR:51:eDP-1] checking for sink bpp constrains
>[  104.636051] [drm:intel_atomic_check [i915]] clamping display bpp (was 36) to EDID reported max of 24
>[  104.636085] [drm:intel_dp_compute_config [i915]] DP link computation with max lane count 2 max bw 270000 pixel clock 138120KHz
>[  104.636116] [drm:intel_dp_compute_config [i915]] DP link bw 0a rate select 00 lane count 2 clock 270000 bpp 24
>[  104.636140] [drm:intel_dp_compute_config [i915]] DP link bw required 414360 available 540000
>[  104.636167] [drm:intel_atomic_check [i915]] hw max bpp: 36, pipe bpp: 24, dithering: 0
>[  104.636193] [drm:intel_dump_pipe_config [i915]] [CRTC:33:pipe A][modeset]
>[  104.636219] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0
>[  104.636246] [drm:intel_dump_pipe_config [i915]] dp m_n: lanes: 2; gmch_m: 6436858, gmch_n: 8388608, link_m: 268202, link_n: 524288, tu: 64
>[  104.636272] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
>[  104.636298] [drm:intel_dump_pipe_config [i915]] requested mode:
>[  104.636314] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1920x1080" 60 138120 1920 1968 2018 2052 1080 1084 1086 1122 0x0 0xa
>[  104.636340] [drm:intel_dump_pipe_config [i915]] adjusted mode:
>[  104.636356] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1920x1080" 60 138120 1920 1968 2018 2052 1080 1084 1086 1122 0x48 0xa
>[  104.636382] [drm:intel_dump_pipe_config [i915]] crtc timings: 138120 1920 1968 2018 2052 1080 1084 1086 1122, type: 0x48 flags: 0xa
>[  104.636408] [drm:intel_dump_pipe_config [i915]] port clock: 270000, pipe src size: 1920x1080
>[  104.636434] [drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1
>[  104.636460] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[  104.636486] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
>[  104.636513] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: ebb0: 0x8100, ebb4: 0x2000,pll0: 0x1b, pll1: 0x100, pll2: 0x0, pll3: 0x0, pll6: 0x10803, pll8: 0x9, pll9: 0xa, pll10: 0x8003c00, pcsdw12: 0x4d
>[  104.636539] [drm:intel_dump_pipe_config [i915]] planes on this crtc
>[  104.636577] [drm:intel_dump_pipe_config [i915]] [PLANE:25:plane 1A] FB:73, fb = 1920x1080 format = XR24 little-endian (0x34325258)
>[  104.636604] [drm:intel_dump_pipe_config [i915]] 	scaler:-1 src 0x0+1920+1080 dst 0x0+1920+1080
>[  104.636630] [drm:intel_dump_pipe_config [i915]] [PLANE:27:plane 2A] disabled, scaler_id = -1
>[  104.636656] [drm:intel_dump_pipe_config [i915]] [PLANE:29:plane 3A] disabled, scaler_id = -1
>[  104.636682] [drm:intel_dump_pipe_config [i915]] [PLANE:31:cursor A] disabled, scaler_id = -1
>[  104.636712] [drm:intel_atomic_check [i915]] New cdclk calculated to be atomic 144000, actual 144000
>[  104.636750] [drm:bxt_get_dpll [i915]] [CRTC:33:pipe A] using pre-allocated PORT PLL A
>[  104.636778] [drm:intel_reference_shared_dpll [i915]] using PORT PLL A for pipe A
>[  104.636808] [drm:skl_update_scaler [i915]] scaler_user index 1.31: Staged freeing scaler id 0 scaler_users = 0x0
>[  104.636834] [drm:skl_update_scaler [i915]] scaler_user index 2.31: Staged freeing scaler id 0 scaler_users = 0x0
>[  104.636875] [drm:intel_power_well_enable [i915]] enabling dpio-common-a
>[  104.636973] [drm:intel_atomic_commit_tail [i915]] [ENCODER:50:DDI A]
>[  104.636999] [drm:intel_atomic_commit_tail [i915]] [ENCODER:58:DDI B]
>[  104.637026] [drm:intel_atomic_commit_tail [i915]] [ENCODER:60:DP-MST A]
>[  104.637052] [drm:intel_atomic_commit_tail [i915]] [ENCODER:61:DP-MST B]
>[  104.637078] [drm:intel_atomic_commit_tail [i915]] [ENCODER:62:DP-MST C]
>[  104.637104] [drm:intel_atomic_commit_tail [i915]] [ENCODER:65:DDI C]
>[  104.637130] [drm:intel_atomic_commit_tail [i915]] [ENCODER:67:DP-MST A]
>[  104.637158] [drm:intel_atomic_commit_tail [i915]] [ENCODER:68:DP-MST B]
>[  104.637184] [drm:intel_atomic_commit_tail [i915]] [ENCODER:69:DP-MST C]
>[  104.637213] [drm:verify_connector_state.isra.83 [i915]] [CONNECTOR:59:DP-1]
>[  104.637239] [drm:verify_connector_state.isra.83 [i915]] [CONNECTOR:63:HDMI-A-1]
>[  104.637265] [drm:verify_connector_state.isra.83 [i915]] [CONNECTOR:66:DP-2]
>[  104.637291] [drm:verify_connector_state.isra.83 [i915]] [CONNECTOR:70:HDMI-A-2]
>[  104.637319] [drm:verify_single_dpll_state.isra.115 [i915]] PORT PLL A
>[  104.637346] [drm:verify_single_dpll_state.isra.115 [i915]] PORT PLL B
>[  104.637373] [drm:verify_single_dpll_state.isra.115 [i915]] PORT PLL C
>[  104.637413] [drm:intel_enable_shared_dpll [i915]] enable PORT PLL A (active 1, on? 0) for crtc 33
>[  104.637439] [drm:intel_enable_shared_dpll [i915]] enabling PORT PLL A
>[  104.637558] [drm:edp_panel_on [i915]] Turn eDP port A panel power on
>[  104.637584] [drm:wait_panel_power_cycle [i915]] Wait for panel power cycle
>[  104.637612] [drm:wait_panel_status [i915]] mask b800000f value 00000000 status 00000000 control 00000060
>[  104.637638] [drm:wait_panel_status [i915]] Wait complete
>[  104.637664] [drm:edp_panel_on [i915]] Wait for panel power on
>[  104.637691] [drm:wait_panel_status [i915]] mask b000000f value 80000008 status 9000000a control 00000063
>[  104.745154] [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x00000008, dig 0x1a001818, pins 0x00000010
>[  104.745182] [drm:intel_hpd_irq_handler [i915]] digital hpd port A - long
>[  104.745209] [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 0
>[  104.745260] [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP port A
>[  104.828639] usb 2-5: Disable of device-initiated U1 failed.
>[  104.828653] usb 2-5: Disable of device-initiated U2 failed.
>[  104.833067] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0
>[  104.838603] [drm:wait_panel_status [i915]] Wait complete
>[  104.838638] [drm:edp_panel_vdd_on [i915]] Turning eDP port A VDD on
>[  104.838667] [drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b
>[  104.839856] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 0
>[  104.839882] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0
>[  104.839910] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS1
>[  104.840741] [drm:intel_dp_start_link_train [i915]] clock recovery OK
>[  104.840766] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS2
>[  104.841749] [drm:intel_dp_start_link_train [i915]] Channel EQ done. DP Training successful
>[  104.841972] [drm:skylake_pfit_enable [i915]] for crtc_state = ffff913feb4be000
>[  104.842063] [drm:intel_enable_pipe [i915]] enabling pipe A
>[  104.842113] [drm:intel_edp_backlight_on.part.27 [i915]] 
>[  104.842139] [drm:intel_panel_enable_backlight [i915]] pipe A
>[  104.842168] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 96000
>[  104.848573] [drm:intel_psr_enable [i915]] PSR not supported on this platform
>[  104.848598] [drm:intel_edp_drrs_enable [i915]] Panel doesn't support DRRS
>[  104.858958] [drm:verify_connector_state.isra.83 [i915]] [CONNECTOR:51:eDP-1]
>[  104.858988] [drm:intel_atomic_commit_tail [i915]] [CRTC:33:pipe A]
>[  104.859061] [drm:verify_single_dpll_state.isra.115 [i915]] PORT PLL A
>[  104.859105] [drm:intel_atomic_commit_tail [i915]] [CRTC:42:pipe B]
>[  104.859134] [drm:intel_atomic_commit_tail [i915]] [CRTC:49:pipe C]
>[  104.859177] [drm:bxt_hpd_irq_setup [i915]] Invert bit setting: hp_ctl:18001818 hp_port:38
>[  104.859203] [drm:intel_opregion_register [i915]] 5 outputs detected
>[  104.859232] [drm:intel_dp_detect [i915]] [CONNECTOR:51:eDP-1]
>[  104.859261] [drm:intel_dp_detect [i915]] Display Port TPS3 support: source yes, sink no
>[  104.859289] [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000
>[  104.859314] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000
>[  104.859341] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000
>[  104.862032] [drm:intel_dp_read_desc [i915]] DP sink: OUI 00-1c-f8 dev-ID b\006UA\021\001 HW-rev 10.0 SW-rev 1.8
>[  104.862486] [drm:drm_helper_hpd_irq_event [drm_kms_helper]] [CONNECTOR:51:eDP-1] status updated from connected to connected
>[  104.862511] [drm:intel_dp_detect [i915]] [CONNECTOR:59:DP-1]
>[  104.862536] [drm:intel_power_well_enable [i915]] enabling dpio-common-bc
>[  104.862643] [drm:intel_power_well_disable [i915]] disabling dpio-common-bc
>[  104.862651] [drm:drm_helper_hpd_irq_event [drm_kms_helper]] [CONNECTOR:59:DP-1] status updated from disconnected to disconnected
>[  104.862678] [drm:intel_hdmi_detect [i915]] [CONNECTOR:63:HDMI-A-1]
>[  104.862865] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
>[  104.862890] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
>[  104.863093] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
>[  104.863116] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb
>[  104.863350] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
>[  104.863374] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
>[  104.863571] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
>[  104.863581] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[  104.863588] [drm:drm_helper_hpd_irq_event [drm_kms_helper]] [CONNECTOR:63:HDMI-A-1] status updated from disconnected to disconnected
>[  104.863613] [drm:intel_dp_detect [i915]] [CONNECTOR:66:DP-2]
>[  104.863637] [drm:intel_power_well_enable [i915]] enabling dpio-common-bc
>[  104.863761] [drm:intel_power_well_disable [i915]] disabling dpio-common-bc
>[  104.863770] [drm:drm_helper_hpd_irq_event [drm_kms_helper]] [CONNECTOR:66:DP-2] status updated from disconnected to disconnected
>[  104.863794] [drm:intel_hdmi_detect [i915]] [CONNECTOR:70:HDMI-A-2]
>[  104.864046] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[  104.864070] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[  104.864294] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[  104.864311] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc
>[  104.864517] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[  104.864541] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[  104.864770] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[  104.864779] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[  104.864787] [drm:drm_helper_hpd_irq_event [drm_kms_helper]] [CONNECTOR:70:HDMI-A-2] status updated from disconnected to disconnected
>[  104.948613] usb 1-7: reset full-speed USB device number 4 using xhci_hcd
>[  105.116633] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[  105.161121] atkbd serio0: Failed to enable keyboard on isa0060/serio0
>[  105.360766] usb 2-5: reset SuperSpeed USB device number 2 using xhci_hcd
>[  105.517139] hpet1: lost 7161 rtc interrupts
>[  105.648693] usb 1-4: reset low-speed USB device number 3 using xhci_hcd
>[  105.868662] ata1.00: configured for UDMA/133
>[  105.884569] [drm] RC6 on
>[  106.232653] usb 1-2: reset low-speed USB device number 2 using xhci_hcd
>[  106.313311] igb 0000:01:00.0 enp1s0: igb: enp1s0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
>[  106.451282] hpet1: lost 7161 rtc interrupts
>[  106.567958] PM: restore of devices complete after 1969.746 msecs
>[  106.568028] usb 1-7:1.0: rebind failed: -517
>[  106.568034] usb 1-7:1.1: rebind failed: -517
>[  106.568297] PM: Image restored successfully.
>[  106.568343] PM: Basic memory bitmaps freed
>[  106.568345] Restarting tasks ... done.
>[  106.603850] Bluetooth: hci0: read Intel version: 370810011003110e23
>[  106.603853] Bluetooth: hci0: Intel device is already patched. patch num: 23
>[  107.548690] [drm:edp_panel_vdd_off_sync [i915]] Turning eDP port A VDD off
>[  107.548757] [drm:edp_panel_vdd_off_sync [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067
>[  107.869001] [drm:intel_power_well_disable [i915]] disabling power well 2
>[  107.869084] [drm:skl_set_power_well [i915]] Disabling power well 2
>[  107.869153] [drm:intel_power_well_disable [i915]] disabling DC off
>[  107.869226] [drm:gen9_enable_dc5 [i915]] Enabling DC5
>[  107.869297] [drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 01

Actions: View

Attachments on bug 99370: 128902

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.