Attachment 130400 Details for Bug 100357 – dmesg log

dmesg log

kernel.log (text/x-log), 73.60 KB, created by miguel.deval on 2017-03-23 15:08:56 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: miguel.deval

Created: 2017-03-23 15:08:56 UTC

Size: 73.60 KB

patch

obsolete

>[    0.000000] Linux version 4.9.15-1-lts (builduser@andyrtr) (gcc version 6.3.1 20170306 (GCC) ) #1 SMP Wed Mar 15 15:34:28 CET 2017
>[    0.000000] Command line: BOOT_IMAGE=../vmlinuz-linux-lts root=/dev/sda1 rw resume=/dev/sda2 initrd=../initramfs-linux-lts.img
>[    0.000000] x86/fpu: Legacy x87 FPU detected.
>[    0.000000] x86/fpu: Using 'eager' FPU context switches.
>[    0.000000] e820: BIOS-provided physical RAM map:
>[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable
>[    0.000000] BIOS-e820: [mem 0x000000000008f000-0x000000000009ffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000df62cfff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000df62d000-0x00000000df634fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000df635000-0x00000000df66efff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000df66f000-0x00000000df6befff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000df6bf000-0x00000000df6cffff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000df6d0000-0x00000000df7befff] ACPI NVS
>[    0.000000] BIOS-e820: [mem 0x00000000df7bf000-0x00000000df7e5fff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000df7e6000-0x00000000df7eefff] ACPI data
>[    0.000000] BIOS-e820: [mem 0x00000000df7ef000-0x00000000df7effff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000df7f0000-0x00000000df7fefff] ACPI data
>[    0.000000] BIOS-e820: [mem 0x00000000df7ff000-0x00000000df7fffff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000df800000-0x00000000dfffffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000ffffffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021fffffff] usable
>[    0.000000] NX (Execute Disable) protection: active
>[    0.000000] SMBIOS 2.6 present.
>[    0.000000] DMI:                  /DP55WG, BIOS KGIBX10J.86A.5531.2010.0521.1135 05/21/2010
>[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
>[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
>[    0.000000] e820: last_pfn = 0x220000 max_arch_pfn = 0x400000000
>[    0.000000] MTRR default type: uncachable
>[    0.000000] MTRR fixed ranges enabled:
>[    0.000000]   00000-9FFFF write-back
>[    0.000000]   A0000-BFFFF uncachable
>[    0.000000]   C0000-DFFFF write-protect
>[    0.000000]   E0000-FFFFF uncachable
>[    0.000000] MTRR variable ranges enabled:
>[    0.000000]   0 base 000000000 mask F80000000 write-back
>[    0.000000]   1 base 080000000 mask FC0000000 write-back
>[    0.000000]   2 base 0C0000000 mask FE0000000 write-back
>[    0.000000]   3 base 0FFE00000 mask FFFE00000 write-protect
>[    0.000000]   4 base 100000000 mask F00000000 write-back
>[    0.000000]   5 base 200000000 mask E00000000 write-back
>[    0.000000]   6 disabled
>[    0.000000]   7 disabled
>[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
>[    0.000000] e820: last_pfn = 0xdf800 max_arch_pfn = 0x400000000
>[    0.000000] Scanning 1 areas for low memory corruption
>[    0.000000] Base memory trampoline at [ffff880000089000] 89000 size 24576
>[    0.000000] BRK [0x01d58000, 0x01d58fff] PGTABLE
>[    0.000000] BRK [0x01d59000, 0x01d59fff] PGTABLE
>[    0.000000] BRK [0x01d5a000, 0x01d5afff] PGTABLE
>[    0.000000] BRK [0x01d5b000, 0x01d5bfff] PGTABLE
>[    0.000000] BRK [0x01d5c000, 0x01d5cfff] PGTABLE
>[    0.000000] BRK [0x01d5d000, 0x01d5dfff] PGTABLE
>[    0.000000] RAMDISK: [mem 0x7fa27000-0x7fffffff]
>[    0.000000] ACPI: Early table checksum verification disabled
>[    0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 INTEL )
>[    0.000000] ACPI: XSDT 0x00000000DF7FD120 00006C (v01 INTEL  KBIBX10J 0000159B      01000013)
>[    0.000000] ACPI: FACP 0x00000000DF7FC000 0000F4 (v03 INTEL  KBIBX10J 0000159B MSFT 0100000D)
>[    0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aEventBlock: 32/16 (20160831/tbfadt-603)
>[    0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/PmTimerBlock: 32/24 (20160831/tbfadt-603)
>[    0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aEventBlock: 16, using default 32 (20160831/tbfadt-708)
>[    0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/PmTimerBlock: 24, using default 32 (20160831/tbfadt-708)
>[    0.000000] ACPI: DSDT 0x00000000DF7F7000 0040F6 (v02 INTEL  KBIBX10J 0000159B MSFT 0100000D)
>[    0.000000] ACPI: FACS 0x00000000DF768000 000040
>[    0.000000] ACPI: FACS 0x00000000DF768000 000040
>[    0.000000] ACPI: APIC 0x00000000DF7F6000 0000BC (v02 INTEL  KBIBX10J 0000159B MSFT 0100000D)
>[    0.000000] ACPI: WDDT 0x00000000DF7F5000 000040 (v01 INTEL  KBIBX10J 0000159B MSFT 0100000D)
>[    0.000000] ACPI: MCFG 0x00000000DF7F4000 00003C (v01 INTEL  KBIBX10J 0000159B MSFT 0100000D)
>[    0.000000] ACPI: ASF! 0x00000000DF7F3000 0000A5 (v32 INTEL  KBIBX10J 0000159B MSFT 0100000D)
>[    0.000000] ACPI: HPET 0x00000000DF7F2000 000038 (v01 INTEL  KBIBX10J 0000159B MSFT 0100000D)
>[    0.000000] ACPI: SSDT 0x00000000DF7E7000 00759C (v01 INTEL  SSDT  PM 0000159B MSFT 0100000D)
>[    0.000000] ACPI: WDTT 0x00000000DF7F1000 000224 (v02 INTEL  KBIBX10J 0000159B MSFT 0100000D)
>[    0.000000] ACPI: ASPT 0x00000000DF7F0000 000034 (v05 INTEL  PerfTune 0000159B MSFT 0100000D)
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] No NUMA configuration found
>[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000021fffffff]
>[    0.000000] NODE_DATA(0) allocated [mem 0x21fff5000-0x21fff9fff]
>[    0.000000] Zone ranges:
>[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
>[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
>[    0.000000]   Normal   [mem 0x0000000100000000-0x000000021fffffff]
>[    0.000000]   Device   empty
>[    0.000000] Movable zone start for each node
>[    0.000000] Early memory node ranges
>[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000008efff]
>[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000df62cfff]
>[    0.000000]   node   0: [mem 0x00000000df635000-0x00000000df66efff]
>[    0.000000]   node   0: [mem 0x00000000df6bf000-0x00000000df6cffff]
>[    0.000000]   node   0: [mem 0x00000000df7bf000-0x00000000df7e5fff]
>[    0.000000]   node   0: [mem 0x00000000df7ef000-0x00000000df7effff]
>[    0.000000]   node   0: [mem 0x00000000df7ff000-0x00000000df7fffff]
>[    0.000000]   node   0: [mem 0x0000000100000000-0x000000021fffffff]
>[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000021fffffff]
>[    0.000000] On node 0 totalpages: 2094639
>[    0.000000]   DMA zone: 64 pages used for memmap
>[    0.000000]   DMA zone: 21 pages reserved
>[    0.000000]   DMA zone: 3982 pages, LIFO batch:0
>[    0.000000]   DMA32 zone: 14235 pages used for memmap
>[    0.000000]   DMA32 zone: 911009 pages, LIFO batch:31
>[    0.000000]   Normal zone: 18432 pages used for memmap
>[    0.000000]   Normal zone: 1179648 pages, LIFO batch:31
>[    0.000000] ACPI: PM-Timer IO Port: 0x408
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1])
>[    0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>[    0.000000] ACPI: IRQ0 used by override.
>[    0.000000] ACPI: IRQ9 used by override.
>[    0.000000] Using ACPI (MADT) for SMP configuration information
>[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
>[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
>[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
>[    0.000000] PM: Registered nosave memory: [mem 0x0008f000-0x0009ffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xdf62d000-0xdf634fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xdf66f000-0xdf6befff]
>[    0.000000] PM: Registered nosave memory: [mem 0xdf6d0000-0xdf7befff]
>[    0.000000] PM: Registered nosave memory: [mem 0xdf7e6000-0xdf7eefff]
>[    0.000000] PM: Registered nosave memory: [mem 0xdf7f0000-0xdf7fefff]
>[    0.000000] PM: Registered nosave memory: [mem 0xdf800000-0xdfffffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xffffffff]
>[    0.000000] e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices
>[    0.000000] Booting paravirtualized kernel on bare hardware
>[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
>[    0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
>[    0.000000] percpu: Embedded 34 pages/cpu @ffff88021fc00000 s102040 r8192 d29032 u262144
>[    0.000000] pcpu-alloc: s102040 r8192 d29032 u262144 alloc=1*2097152
>[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
>[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 2061887
>[    0.000000] Policy zone: Normal
>[    0.000000] Kernel command line: BOOT_IMAGE=../vmlinuz-linux-lts root=/dev/sda1 rw resume=/dev/sda2 initrd=../initramfs-linux-lts.img
>[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
>[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
>[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>[    0.000000] Memory: 8160576K/8378556K available (6137K kernel code, 1075K rwdata, 1940K rodata, 1280K init, 1032K bss, 217980K reserved, 0K cma-reserved)
>[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
>[    0.000000] Hierarchical RCU implementation.
>[    0.000000] 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
>[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
>[    0.000000] NR_IRQS:8448 nr_irqs:488 16
>[    0.000000] Console: colour VGA+ 80x25
>[    0.000000] console [tty0] enabled
>[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
>[    0.000000] hpet clockevent registered
>[    0.000000] tsc: Fast TSC calibration using PIT
>[    0.000000] tsc: Detected 2933.497 MHz processor
>[    0.000021] Calibrating delay loop (skipped), value calculated using timer frequency.. 5866.99 BogoMIPS (lpj=29334970)
>[    0.000023] pid_max: default: 32768 minimum: 301
>[    0.000028] ACPI: Core revision 20160831
>[    0.005601] ACPI: 2 ACPI AML tables successfully acquired and loaded
>[    0.005621] Security Framework initialized
>[    0.005621] Yama: becoming mindful.
>[    0.005949] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
>[    0.007559] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
>[    0.008171] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
>[    0.008177] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
>[    0.008412] CPU: Physical Processor ID: 0
>[    0.008412] CPU: Processor Core ID: 0
>[    0.008416] mce: CPU supports 9 MCE banks
>[    0.008422] CPU0: Thermal monitoring enabled (TM1)
>[    0.008430] process: using mwait in idle threads
>[    0.008432] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
>[    0.008433] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
>[    0.008675] Freeing SMP alternatives memory: 24K (ffffffff81c4e000 - ffffffff81c54000)
>[    0.009789] ftrace: allocating 24607 entries in 97 pages
>[    0.020439] smpboot: Max logical packages: 2
>[    0.020905] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>[    0.237428] smpboot: CPU0: Intel(R) Core(TM) i7 CPU         870  @ 2.93GHz (family: 0x6, model: 0x1e, stepping: 0x5)
>[    0.237431] Performance Events: PEBS fmt1+, Nehalem events, 16-deep LBR, Intel PMU driver.
>[    0.237445] core: CPU erratum AAJ80 worked around
>[    0.237445] core: CPUID marked event: 'bus cycles' unavailable
>[    0.237446] ... version:                3
>[    0.237447] ... bit width:              48
>[    0.237447] ... generic registers:      4
>[    0.237448] ... value mask:             0000ffffffffffff
>[    0.237448] ... max period:             000000007fffffff
>[    0.237449] ... fixed-purpose events:   3
>[    0.237449] ... event mask:             000000070000000f
>[    0.237978] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
>[    0.238052] x86: Booting SMP configuration:
>[    0.238053] .... node  #0, CPUs:      #1 #2 #3
>[    0.689458] x86: Booted up 1 node, 4 CPUs
>[    0.689460] smpboot: Total of 4 processors activated (23467.22 BogoMIPS)
>[    0.692042] devtmpfs: initialized
>[    0.692092] x86/mm: Memory block size: 128MB
>[    0.695160] PM: Registering ACPI NVS region [mem 0xdf6d0000-0xdf7befff] (978944 bytes)
>[    0.695213] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
>[    0.695222] futex hash table entries: 2048 (order: 5, 131072 bytes)
>[    0.695259] pinctrl core: initialized pinctrl subsystem
>[    0.695299] RTC time: 17:48:19, date: 03/21/17
>[    0.695372] NET: Registered protocol family 16
>[    0.717414] cpuidle: using governor ladder
>[    0.747412] cpuidle: using governor menu
>[    0.747452] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
>[    0.747453] ACPI: bus type PCI registered
>[    0.747455] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
>[    0.747529] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
>[    0.747530] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
>[    0.747534] PCI: Using configuration type 1 for base access
>[    0.787552] HugeTLB registered 2 MB page size, pre-allocated 0 pages
>[    0.787708] ACPI: Added _OSI(Module Device)
>[    0.787709] ACPI: Added _OSI(Processor Device)
>[    0.787710] ACPI: Added _OSI(3.0 _SCP Extensions)
>[    0.787710] ACPI: Added _OSI(Processor Aggregator Device)
>[    0.792302] ACPI: Interpreter enabled
>[    0.792316] ACPI: (supports S0 S1 S3 S4 S5)
>[    0.792317] ACPI: Using IOAPIC for interrupt routing
>[    0.792333] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>[    0.796365] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
>[    0.796369] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
>[    0.796473] acpi PNP0A08:00: _OSC: platform does not support [PME]
>[    0.796571] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug AER PCIeCapability]
>[    0.796572] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
>[    0.796918] PCI host bridge to bus 0000:00
>[    0.796920] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
>[    0.796921] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
>[    0.796922] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
>[    0.796923] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xf7ffffff window]
>[    0.796924] pci_bus 0000:00: root bus resource [bus 00-3e]
>[    0.796931] pci 0000:00:00.0: [8086:d131] type 00 class 0x060000
>[    0.797040] pci 0000:00:03.0: [8086:d138] type 01 class 0x060400
>[    0.797084] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
>[    0.797134] pci 0000:00:03.0: System wakeup disabled by ACPI
>[    0.797172] pci 0000:00:08.0: [8086:d155] type 00 class 0x088000
>[    0.797272] pci 0000:00:08.1: [8086:d156] type 00 class 0x088000
>[    0.797368] pci 0000:00:08.2: [8086:d157] type 00 class 0x088000
>[    0.797462] pci 0000:00:08.3: [8086:d158] type 00 class 0x088000
>[    0.797559] pci 0000:00:10.0: [8086:d150] type 00 class 0x088000
>[    0.797642] pci 0000:00:10.1: [8086:d151] type 00 class 0x088000
>[    0.797748] pci 0000:00:19.0: [8086:10f0] type 00 class 0x020000
>[    0.797766] pci 0000:00:19.0: reg 0x10: [mem 0xf3200000-0xf321ffff]
>[    0.797777] pci 0000:00:19.0: reg 0x14: [mem 0xf3224000-0xf3224fff]
>[    0.797788] pci 0000:00:19.0: reg 0x18: [io  0x2040-0x205f]
>[    0.797848] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
>[    0.797896] pci 0000:00:19.0: System wakeup disabled by ACPI
>[    0.797937] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
>[    0.798464] pci 0000:00:1a.0: reg 0x10: [mem 0xf3225c00-0xf3225fff]
>[    0.801173] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
>[    0.801251] pci 0000:00:1a.0: System wakeup disabled by ACPI
>[    0.801295] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
>[    0.801313] pci 0000:00:1b.0: reg 0x10: [mem 0xf3220000-0xf3223fff 64bit]
>[    0.801386] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>[    0.801457] pci 0000:00:1b.0: System wakeup disabled by ACPI
>[    0.801499] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
>[    0.801562] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>[    0.801614] pci 0000:00:1c.0: System wakeup disabled by ACPI
>[    0.801662] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
>[    0.802180] pci 0000:00:1d.0: reg 0x10: [mem 0xf3225800-0xf3225bff]
>[    0.805107] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
>[    0.805185] pci 0000:00:1d.0: System wakeup disabled by ACPI
>[    0.805225] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
>[    0.805315] pci 0000:00:1e.0: System wakeup disabled by ACPI
>[    0.805356] pci 0000:00:1f.0: [8086:3b02] type 00 class 0x060100
>[    0.805533] pci 0000:00:1f.2: [8086:3b22] type 00 class 0x010601
>[    0.805550] pci 0000:00:1f.2: reg 0x10: [io  0x2068-0x206f]
>[    0.805561] pci 0000:00:1f.2: reg 0x14: [io  0x2074-0x2077]
>[    0.805571] pci 0000:00:1f.2: reg 0x18: [io  0x2060-0x2067]
>[    0.805582] pci 0000:00:1f.2: reg 0x1c: [io  0x2070-0x2073]
>[    0.805592] pci 0000:00:1f.2: reg 0x20: [io  0x2020-0x203f]
>[    0.805603] pci 0000:00:1f.2: reg 0x24: [mem 0xf3225000-0xf32257ff]
>[    0.805647] pci 0000:00:1f.2: PME# supported from D3hot
>[    0.805731] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
>[    0.805748] pci 0000:00:1f.3: reg 0x10: [mem 0xf3226000-0xf32260ff 64bit]
>[    0.805769] pci 0000:00:1f.3: reg 0x20: [io  0x2000-0x201f]
>[    0.805898] pci 0000:01:00.0: [10de:0ca3] type 00 class 0x030000
>[    0.805907] pci 0000:01:00.0: reg 0x10: [mem 0xf2000000-0xf2ffffff]
>[    0.805916] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
>[    0.805924] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
>[    0.805930] pci 0000:01:00.0: reg 0x24: [io  0x1000-0x107f]
>[    0.805936] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
>[    0.806014] pci 0000:01:00.1: [10de:0be4] type 00 class 0x040300
>[    0.806023] pci 0000:01:00.1: reg 0x10: [mem 0xf3000000-0xf3003fff]
>[    0.829458] pci 0000:00:03.0: PCI bridge to [bus 01]
>[    0.829462] pci 0000:00:03.0:   bridge window [io  0x1000-0x1fff]
>[    0.829466] pci 0000:00:03.0:   bridge window [mem 0xf2000000-0xf30fffff]
>[    0.829472] pci 0000:00:03.0:   bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
>[    0.829538] pci 0000:00:1c.0: PCI bridge to [bus 02]
>[    0.829589] pci 0000:03:01.0: [1814:3062] type 00 class 0x028000
>[    0.829607] pci 0000:03:01.0: reg 0x10: [mem 0xf3100000-0xf310ffff]
>[    0.829725] pci 0000:03:03.0: [104c:8023] type 00 class 0x0c0010
>[    0.829743] pci 0000:03:03.0: reg 0x10: [mem 0xf3114000-0xf31147ff]
>[    0.829755] pci 0000:03:03.0: reg 0x14: [mem 0xf3110000-0xf3113fff]
>[    0.829828] pci 0000:03:03.0: supports D1 D2
>[    0.829829] pci 0000:03:03.0: PME# supported from D0 D1 D2 D3hot
>[    0.829894] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode)
>[    0.829903] pci 0000:00:1e.0:   bridge window [mem 0xf3100000-0xf31fffff]
>[    0.829911] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
>[    0.829912] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
>[    0.829914] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
>[    0.829915] pci 0000:00:1e.0:   bridge window [mem 0xe0000000-0xf7ffffff window] (subtractive decode)
>[    0.830000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
>[    0.830067] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *9 10 11 12)
>[    0.830132] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
>[    0.830198] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 *10 11 12)
>[    0.830260] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11 12)
>[    0.830326] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
>[    0.830393] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 *9 10 11 12)
>[    0.830458] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 *10 11 12)
>[    0.830788] ACPI: Enabled 4 GPEs in block 00 to 3F
>[    0.830900] vgaarb: setting as boot device: PCI:0000:01:00.0
>[    0.830901] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
>[    0.830902] vgaarb: loaded
>[    0.830903] vgaarb: bridge control possible 0000:01:00.0
>[    0.830958] PCI: Using ACPI for IRQ routing
>[    0.832270] PCI: Discovered peer bus 3f
>[    0.832271] PCI: root bus 3f: using default resources
>[    0.832272] PCI: Probing PCI hardware (bus 3f)
>[    0.832294] ACPI: \: failed to evaluate _DSM (0x1001)
>[    0.832294] PCI host bridge to bus 0000:3f
>[    0.832296] pci_bus 0000:3f: root bus resource [io  0x0000-0xffff]
>[    0.832297] pci_bus 0000:3f: root bus resource [mem 0x00000000-0xfffffffff]
>[    0.832298] pci_bus 0000:3f: No busn resource found for root bus, will use [bus 3f-ff]
>[    0.832302] pci 0000:3f:00.0: [8086:2c51] type 00 class 0x060000
>[    0.832338] pci 0000:3f:00.1: [8086:2c81] type 00 class 0x060000
>[    0.832373] pci 0000:3f:02.0: [8086:2c90] type 00 class 0x060000
>[    0.832406] pci 0000:3f:02.1: [8086:2c91] type 00 class 0x060000
>[    0.832440] pci 0000:3f:03.0: [8086:2c98] type 00 class 0x060000
>[    0.832472] pci 0000:3f:03.1: [8086:2c99] type 00 class 0x060000
>[    0.832506] pci 0000:3f:03.4: [8086:2c9c] type 00 class 0x060000
>[    0.832539] pci 0000:3f:04.0: [8086:2ca0] type 00 class 0x060000
>[    0.832572] pci 0000:3f:04.1: [8086:2ca1] type 00 class 0x060000
>[    0.832604] pci 0000:3f:04.2: [8086:2ca2] type 00 class 0x060000
>[    0.832637] pci 0000:3f:04.3: [8086:2ca3] type 00 class 0x060000
>[    0.832670] pci 0000:3f:05.0: [8086:2ca8] type 00 class 0x060000
>[    0.832703] pci 0000:3f:05.1: [8086:2ca9] type 00 class 0x060000
>[    0.832738] pci 0000:3f:05.2: [8086:2caa] type 00 class 0x060000
>[    0.832771] pci 0000:3f:05.3: [8086:2cab] type 00 class 0x060000
>[    0.832812] pci_bus 0000:3f: busn_res: [bus 3f-ff] end is updated to 3f
>[    0.832816] PCI: pci_cache_line_size set to 64 bytes
>[    0.832875] e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff]
>[    0.832876] e820: reserve RAM buffer [mem 0xdf62d000-0xdfffffff]
>[    0.832877] e820: reserve RAM buffer [mem 0xdf66f000-0xdfffffff]
>[    0.832878] e820: reserve RAM buffer [mem 0xdf6d0000-0xdfffffff]
>[    0.832879] e820: reserve RAM buffer [mem 0xdf7e6000-0xdfffffff]
>[    0.832880] e820: reserve RAM buffer [mem 0xdf7f0000-0xdfffffff]
>[    0.832881] e820: reserve RAM buffer [mem 0xdf800000-0xdfffffff]
>[    0.832953] NetLabel: Initializing
>[    0.832954] NetLabel:  domain hash size = 128
>[    0.832954] NetLabel:  protocols = UNLABELED CIPSOv4
>[    0.832966] NetLabel:  unlabeled traffic allowed by default
>[    0.833060] HPET: 8 timers in total, 5 timers will be used for per-cpu timer
>[    0.833070] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 25, 26, 27, 28, 0
>[    0.833074] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
>[    0.835117] hpet: hpet2 irq 24 for MSI
>[    0.835159] hpet: hpet3 irq 25 for MSI
>[    0.835202] hpet: hpet4 irq 26 for MSI
>[    0.835242] hpet: hpet5 irq 27 for MSI
>[    0.835268] clocksource: Switched to clocksource hpet
>[    0.839897] VFS: Disk quotas dquot_6.6.0
>[    0.839913] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>[    0.839976] pnp: PnP ACPI init
>[    0.840054] system 00:00: [mem 0xf8000000-0xffffffff] could not be reserved
>[    0.840057] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.840195] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
>[    0.840235] system 00:02: [io  0x0500-0x057f] has been reserved
>[    0.840237] system 00:02: [io  0x0400-0x047f] has been reserved
>[    0.840238] system 00:02: [io  0x0680-0x06ff] has been reserved
>[    0.840240] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.840301] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.840428] pnp: PnP ACPI: found 4 devices
>[    0.846879] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
>[    0.846882] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
>[    0.846900] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 02] add_size 1000
>[    0.846902] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
>[    0.846903] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000
>[    0.846916] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
>[    0.846918] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
>[    0.846919] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
>[    0.846920] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
>[    0.846922] pci 0000:00:1c.0: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
>[    0.846923] pci 0000:00:1c.0: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
>[    0.846927] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf3300000-0xf34fffff]
>[    0.846929] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf3500000-0xf36fffff 64bit pref]
>[    0.846931] pci 0000:00:1c.0: BAR 13: assigned [io  0x3000-0x3fff]
>[    0.846933] pci 0000:01:00.0: BAR 6: assigned [mem 0xf3080000-0xf30fffff pref]
>[    0.846935] pci 0000:00:03.0: PCI bridge to [bus 01]
>[    0.846936] pci 0000:00:03.0:   bridge window [io  0x1000-0x1fff]
>[    0.846939] pci 0000:00:03.0:   bridge window [mem 0xf2000000-0xf30fffff]
>[    0.846941] pci 0000:00:03.0:   bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
>[    0.846944] pci 0000:00:1c.0: PCI bridge to [bus 02]
>[    0.846946] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
>[    0.846954] pci 0000:00:1c.0:   bridge window [mem 0xf3300000-0xf34fffff]
>[    0.846960] pci 0000:00:1c.0:   bridge window [mem 0xf3500000-0xf36fffff 64bit pref]
>[    0.846969] pci 0000:00:1e.0: PCI bridge to [bus 03]
>[    0.846976] pci 0000:00:1e.0:   bridge window [mem 0xf3100000-0xf31fffff]
>[    0.846987] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
>[    0.846988] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
>[    0.846989] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
>[    0.846990] pci_bus 0000:00: resource 7 [mem 0xe0000000-0xf7ffffff window]
>[    0.846991] pci_bus 0000:01: resource 0 [io  0x1000-0x1fff]
>[    0.846992] pci_bus 0000:01: resource 1 [mem 0xf2000000-0xf30fffff]
>[    0.846993] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
>[    0.846994] pci_bus 0000:02: resource 0 [io  0x3000-0x3fff]
>[    0.846995] pci_bus 0000:02: resource 1 [mem 0xf3300000-0xf34fffff]
>[    0.846996] pci_bus 0000:02: resource 2 [mem 0xf3500000-0xf36fffff 64bit pref]
>[    0.846997] pci_bus 0000:03: resource 1 [mem 0xf3100000-0xf31fffff]
>[    0.846998] pci_bus 0000:03: resource 4 [io  0x0000-0x0cf7 window]
>[    0.846999] pci_bus 0000:03: resource 5 [io  0x0d00-0xffff window]
>[    0.847000] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window]
>[    0.847001] pci_bus 0000:03: resource 7 [mem 0xe0000000-0xf7ffffff window]
>[    0.847042] pci_bus 0000:3f: resource 4 [io  0x0000-0xffff]
>[    0.847043] pci_bus 0000:3f: resource 5 [mem 0x00000000-0xfffffffff]
>[    0.847063] NET: Registered protocol family 2
>[    0.847196] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
>[    0.847364] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>[    0.847621] TCP: Hash tables configured (established 65536 bind 65536)
>[    0.847646] UDP hash table entries: 4096 (order: 5, 131072 bytes)
>[    0.847697] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
>[    0.847774] NET: Registered protocol family 1
>[    0.905535] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
>[    0.905570] PCI: CLS 64 bytes, default 64
>[    0.905608] Unpacking initramfs...
>[    0.990812] Freeing initrd memory: 5988K (ffff88007fa27000 - ffff880080000000)
>[    0.990814] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>[    0.990816] software IO TLB [mem 0xdb62d000-0xdf62d000] (64MB) mapped at [ffff8800db62d000-ffff8800df62cfff]
>[    0.990996] Scanning for low memory corruption every 60 seconds
>[    0.991515] Initialise system trusted keyrings
>[    0.991623] workingset: timestamp_bits=40 max_order=21 bucket_order=0
>[    0.992874] zbud: loaded
>[    0.993403] Key type asymmetric registered
>[    0.993430] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
>[    0.993455] io scheduler noop registered
>[    0.993456] io scheduler deadline registered (default)
>[    0.993461] io scheduler cfq registered
>[    0.993772] pcieport 0000:00:1c.0: enabling device (0000 -> 0003)
>[    0.994040] aer 0000:00:03.0:pcie002: service driver aer loaded
>[    0.994050] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>[    0.994062] pciehp 0000:00:1c.0:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
>[    0.994090] pciehp 0000:00:1c.0:pcie004: service driver pciehp loaded
>[    0.994093] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
>[    0.994103] intel_idle: MWAIT substates: 0x1120
>[    0.994104] intel_idle: v0.4.1 model 0x1E
>[    0.994234] intel_idle: lapic_timer_reliable_states 0x2
>[    0.994615] GHES: HEST is not enabled!
>[    0.994683] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>[    0.995227] Linux agpgart interface v0.103
>[    0.995511] rtc_cmos 00:01: RTC can wake from S4
>[    0.995700] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
>[    0.995730] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
>[    0.995901] ledtrig-cpu: registered to indicate activity on CPUs
>[    0.996073] NET: Registered protocol family 10
>[    0.996258] NET: Registered protocol family 17
>[    0.996450] microcode: sig=0x106e5, pf=0x2, revision=0x4
>[    0.996647] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
>[    0.996910] registered taskstats version 1
>[    0.996914] Loading compiled-in X.509 certificates
>[    0.996924] zswap: loaded using pool lzo/zbud
>[    0.997766]   Magic number: 9:151:846
>[    0.997846] rtc_cmos 00:01: setting system clock to 2017-03-21 17:48:20 UTC (1490118500)
>[    0.997885] PM: Checking hibernation image partition /dev/sda2
>[    0.997887] PM: Hibernation image not present or could not be loaded.
>[    0.998925] Freeing unused kernel memory: 1280K (ffffffff81b0e000 - ffffffff81c4e000)
>[    0.998926] Write protecting the kernel read-only data: 10240k
>[    0.999634] Freeing unused kernel memory: 2040K (ffff880001602000 - ffff880001800000)
>[    0.999999] Freeing unused kernel memory: 108K (ffff8800019e5000 - ffff880001a00000)
>[    1.007819] random: systemd-tmpfile: uninitialized urandom read (16 bytes read)
>[    1.009869] random: systemd-udevd: uninitialized urandom read (16 bytes read)
>[    1.009902] random: systemd-udevd: uninitialized urandom read (16 bytes read)
>[    1.011532] random: udevadm: uninitialized urandom read (16 bytes read)
>[    1.011549] random: udevadm: uninitialized urandom read (16 bytes read)
>[    1.013648] random: systemd-udevd: uninitialized urandom read (16 bytes read)
>[    1.013664] random: systemd-udevd: uninitialized urandom read (16 bytes read)
>[    1.013668] random: systemd-udevd: uninitialized urandom read (16 bytes read)
>[    1.013829] random: systemd-udevd: uninitialized urandom read (16 bytes read)
>[    1.013839] random: systemd-udevd: uninitialized urandom read (16 bytes read)
>[    1.037648] ACPI: bus type USB registered
>[    1.037669] usbcore: registered new interface driver usbfs
>[    1.037681] usbcore: registered new interface driver hub
>[    1.037697] usbcore: registered new device driver usb
>[    1.038066] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>[    1.038286] ehci-pci: EHCI PCI platform driver
>[    1.038476] ehci-pci 0000:00:1a.0: EHCI Host Controller
>[    1.038481] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
>[    1.038492] ehci-pci 0000:00:1a.0: debug port 2
>[    1.042465] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
>[    1.042473] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf3225c00
>[    1.043047] SCSI subsystem initialized
>[    1.044383] libata version 3.00 loaded.
>[    1.065514] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
>[    1.066536] hub 1-0:1.0: USB hub found
>[    1.066602] hub 1-0:1.0: 3 ports detected
>[    1.067383] ehci-pci 0000:00:1d.0: EHCI Host Controller
>[    1.067386] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
>[    1.067399] ehci-pci 0000:00:1d.0: debug port 2
>[    1.071397] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
>[    1.071405] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf3225800
>[    1.095623] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
>[    1.096671] hub 2-0:1.0: USB hub found
>[    1.096738] hub 2-0:1.0: 3 ports detected
>[    1.097459] ahci 0000:00:1f.2: version 3.0
>[    1.105555] firewire_ohci 0000:03:03.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
>[    1.107852] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
>[    1.107854] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst 
>[    1.256095] scsi host0: ahci
>[    1.256273] scsi host1: ahci
>[    1.256669] scsi host2: ahci
>[    1.257140] scsi host3: ahci
>[    1.257326] scsi host4: ahci
>[    1.257690] scsi host5: ahci
>[    1.257735] ata1: SATA max UDMA/133 abar m2048@0xf3225000 port 0xf3225100 irq 31
>[    1.257740] ata2: SATA max UDMA/133 abar m2048@0xf3225000 port 0xf3225180 irq 31
>[    1.257746] ata3: SATA max UDMA/133 abar m2048@0xf3225000 port 0xf3225200 irq 31
>[    1.257751] ata4: SATA max UDMA/133 abar m2048@0xf3225000 port 0xf3225280 irq 31
>[    1.257757] ata5: SATA max UDMA/133 abar m2048@0xf3225000 port 0xf3225300 irq 31
>[    1.257758] ata6: SATA max UDMA/133 abar m2048@0xf3225000 port 0xf3225380 irq 31
>[    1.425391] usb 1-1: new high-speed USB device number 2 using ehci-pci
>[    1.465415] usb 2-1: new high-speed USB device number 2 using ehci-pci
>[    1.587185] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[    1.587506] ata3: SATA link down (SStatus 0 SControl 300)
>[    1.587535] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[    1.587559] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[    1.587582] ata1: SATA link down (SStatus 0 SControl 300)
>[    1.587607] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[    1.588822] ata2.00: ATA-8: ST3500418AS, CC49, max UDMA/133
>[    1.588825] ata2.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
>[    1.589309] ata6.00: ATAPI: Optiarc DVD RW AD-7260S, 1.01, max UDMA/100
>[    1.590319] ata2.00: configured for UDMA/133
>[    1.590702] scsi 1:0:0:0: Direct-Access     ATA      ST3500418AS      CC49 PQ: 0 ANSI: 5
>[    1.591423] ata6.00: configured for UDMA/100
>[    1.593030] ata5.00: ATA-8: WDC WD1003FBYX-01Y7B1, 01.01V02, max UDMA/133
>[    1.593033] ata5.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
>[    1.595088] ata5.00: configured for UDMA/133
>[    1.595466] ata4.00: ATA-8: WDC WD1003FBYX-01Y7B1, 01.01V02, max UDMA/133
>[    1.595469] ata4.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
>[    1.596968] ata4.00: configured for UDMA/133
>[    1.615823] firewire_core 0000:03:03.0: created device fw0: GUID 00902700026a703b, S400
>[    1.616551] hub 1-1:1.0: USB hub found
>[    1.616696] hub 1-1:1.0: 6 ports detected
>[    1.656777] hub 2-1:1.0: USB hub found
>[    1.656940] hub 2-1:1.0: 8 ports detected
>[    1.669793] random: fast init done
>[    1.686040] scsi 3:0:0:0: Direct-Access     ATA      WDC WD1003FBYX-0 1V02 PQ: 0 ANSI: 5
>[    1.806248] scsi 4:0:0:0: Direct-Access     ATA      WDC WD1003FBYX-0 1V02 PQ: 0 ANSI: 5
>[    1.907120] scsi 5:0:0:0: CD-ROM            Optiarc  DVD RW AD-7260S  1.01 PQ: 0 ANSI: 5
>[    1.928964] sd 3:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
>[    1.928980] sd 1:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
>[    1.928990] sd 4:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
>[    1.929042] sd 3:0:0:0: [sdb] Write Protect is off
>[    1.929044] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>[    1.929057] sd 1:0:0:0: [sda] Write Protect is off
>[    1.929058] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[    1.929064] sd 4:0:0:0: [sdc] Write Protect is off
>[    1.929066] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
>[    1.929071] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    1.929086] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    1.929093] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    1.940944]  sdc: sdc1
>[    1.941788] sd 4:0:0:0: [sdc] Attached SCSI disk
>[    1.943381]  sdb: sdb1
>[    1.943964] sd 3:0:0:0: [sdb] Attached SCSI disk
>[    1.957094] sr 5:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>[    1.957096] cdrom: Uniform CD-ROM driver Revision: 3.20
>[    1.957345] sr 5:0:0:0: Attached scsi CD-ROM sr0
>[    1.964098]  sda: sda1 sda2
>[    1.964734] sd 1:0:0:0: [sda] Attached SCSI disk
>[    1.975341] usb 2-1.4: new low-speed USB device number 3 using ehci-pci
>[    2.035361] tsc: Refined TSC clocksource calibration: 2933.440 MHz
>[    2.035364] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2a48a8f0d73, max_idle_ns: 440795306667 ns
>[    2.072776] md: bind<sdb1>
>[    2.075706] md: bind<sdc1>
>[    2.077100] md: raid1 personality registered for level 1
>[    2.077409] md/raid1:md127: active with 2 out of 2 mirrors
>[    2.077504] created bitmap (8 pages) for device md127
>[    2.077691] md127: bitmap initialized from disk: read 1 pages, set 0 of 14903 bits
>[    2.091706] md127: detected capacity change from 0 to 1000069595136
>[    2.144725] hidraw: raw HID events driver (C) Jiri Kosina
>[    2.153366] usbcore: registered new interface driver usbhid
>[    2.153366] usbhid: USB HID core driver
>[    2.153805] input: Darfon USB Combo Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/0003:0D62:001D.0001/input/input0
>[    2.215652] hid-generic 0003:0D62:001D.0001: input,hidraw0: USB HID v1.00 Keyboard [Darfon USB Combo Keyboard] on usb-0000:00:1d.0-1.4/input0
>[    2.216878] input: Darfon USB Combo Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.1/0003:0D62:001D.0002/input/input1
>[    2.235431] usb 2-1.7: new low-speed USB device number 4 using ehci-pci
>[    2.285592] hid-generic 0003:0D62:001D.0002: input,hidraw1: USB HID v1.00 Device [Darfon USB Combo Keyboard] on usb-0000:00:1d.0-1.4/input1
>[    2.287913] PM: Starting manual resume from disk
>[    2.287917] PM: Hibernation image partition 8:2 present
>[    2.287918] PM: Looking for hibernation image.
>[    2.288147] PM: Image not found (code -22)
>[    2.288149] PM: Hibernation image not present or could not be loaded.
>[    2.392864] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7:1.0/0003:046D:C019.0003/input/input2
>[    2.392945] hid-generic 0003:046D:C019.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-1.7/input0
>[    2.423244] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
>[    3.045751] clocksource: Switched to clocksource tsc
>[    3.470795] ip_tables: (C) 2000-2006 Netfilter Core Team
>[    3.559705] systemd[1]: systemd 232 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
>[    3.559809] systemd[1]: Detected architecture x86-64.
>[    3.588852] systemd[1]: Set hostname to <vivaldi>.
>[    4.619892] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
>[    4.620673] systemd[1]: Reached target Host and Network Name Lookups.
>[    4.621508] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
>[    4.622285] systemd[1]: Listening on Journal Socket (/dev/log).
>[    4.623068] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
>[    4.639023] systemd[1]: Listening on Process Core Dump Socket.
>[    4.639805] systemd[1]: Listening on udev Control Socket.
>[    4.990818] EXT4-fs (sda1): re-mounted. Opts: data=ordered
>[    5.000571] sd 1:0:0:0: Attached scsi generic sg0 type 0
>[    5.000603] sd 3:0:0:0: Attached scsi generic sg1 type 0
>[    5.000635] sd 4:0:0:0: Attached scsi generic sg2 type 0
>[    5.000673] sr 5:0:0:0: Attached scsi generic sg3 type 5
>[    5.356354] RPC: Registered named UNIX socket transport module.
>[    5.356355] RPC: Registered udp transport module.
>[    5.356355] RPC: Registered tcp transport module.
>[    5.356356] RPC: Registered tcp NFSv4.1 backchannel transport module.
>[    5.481252] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>[    6.299986] systemd-journald[186]: Received request to flush runtime journal from PID 1
>[    8.168897] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
>[    8.168903] ACPI: Sleep Button [SLPB]
>[    8.168994] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
>[    8.168997] ACPI: Power Button [PWRF]
>[    8.172128] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>[    8.174985] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x000000000000050C-0x000000000000050F (\IGPO) (20160831/utaddress-247)
>[    8.174995] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[    8.235929] wmi: Mapper loaded
>[    8.236011] pps_core: LinuxPPS API ver. 1 registered
>[    8.236012] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
>[    8.255434] PTP clock support registered
>[    8.267069] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
>[    8.344184] snd_hda_intel 0000:01:00.1: Disabling MSI
>[    8.344190] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
>[    8.364457] snd_hda_codec_realtek hdaudioC0D2: ALC889: SKU not ready 0x411111f0
>[    8.365343] snd_hda_codec_realtek hdaudioC0D2: autoconfig for ALC889: line_outs=4 (0x14/0x19/0x16/0x17/0x0) type:line
>[    8.365346] snd_hda_codec_realtek hdaudioC0D2:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>[    8.365347] snd_hda_codec_realtek hdaudioC0D2:    hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
>[    8.365349] snd_hda_codec_realtek hdaudioC0D2:    mono: mono_out=0x0
>[    8.365350] snd_hda_codec_realtek hdaudioC0D2:    dig-out=0x11/0x1e
>[    8.365351] snd_hda_codec_realtek hdaudioC0D2:    inputs:
>[    8.365353] snd_hda_codec_realtek hdaudioC0D2:      Front Mic=0x18
>[    8.365355] snd_hda_codec_realtek hdaudioC0D2:      Rear Mic=0x1b
>[    8.365356] snd_hda_codec_realtek hdaudioC0D2:      Line=0x1a
>[    8.365357] snd_hda_codec_realtek hdaudioC0D2:    dig-in=0x1f
>[    8.371903] FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED
>[    8.386533] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
>[    8.386535] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
>[    8.386726] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
>[    8.387074] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
>[    8.387327] input: HDA Intel MID Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
>[    8.387387] input: HDA Intel MID Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
>[    8.387445] input: HDA Intel MID Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
>[    8.387502] input: HDA Intel MID Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
>[    8.387562] input: HDA Intel MID Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
>[    8.387621] input: HDA Intel MID Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
>[    8.404429] random: crng init done
>[    8.690172] EDAC MC: Ver: 3.0.0
>[    8.695009] EDAC MC0: Giving out device to module i7core_edac.c controller i7 core #0: DEV 0000:3f:03.0 (INTERRUPT)
>[    8.695072] EDAC PCI0: Giving out device to module i7core_edac controller EDAC PCI controller: DEV 0000:3f:03.0 (POLLED)
>[    8.695187] EDAC i7core: Driver loaded, 1 memory controller(s) found.
>[    8.713197] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:27:0e:2e:bf:aa
>[    8.713200] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
>[    8.713286] e1000e 0000:00:19.0 eth0: MAC: 9, PHY: 9, PBA No: FFFFFF-0FF
>[    8.731788] input: PC Speaker as /devices/platform/pcspkr/input/input12
>[    8.845874] iTCO_vendor_support: vendor-support=0
>[    8.857454] gpio_ich: GPIO from 436 to 511 on gpio_ich
>[    8.858681] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
>[    8.858720] iTCO_wdt: Found a P55 TCO device (Version=2, TCOBASE=0x0460)
>[    8.858880] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>[    8.951121] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
>[    8.965047] [drm] Initialized
>[    9.160368] mousedev: PS/2 mouse device common for all mice
>[    9.230588] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3572, rev 0223 detected
>[    9.234134] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0008 detected
>[    9.308850] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
>[    9.396354] e1000e 0000:00:19.0 enp0s25: renamed from eth0
>[    9.398668] MXM: GUID detected in BIOS
>[    9.398960] nouveau 0000:01:00.0: NVIDIA GT215 (0a3180a2)
>[    9.519778] nouveau 0000:01:00.0: bios: version 70.15.37.00.02
>[    9.540794] nouveau 0000:01:00.0: fb: 1024 MiB GDDR5
>[    9.810251] rt2800pci 0000:03:01.0 wlp3s1: renamed from wlan0
>[   10.736182] EXT4-fs (md127): mounted filesystem with ordered data mode. Opts: data=ordered
>[   11.341621] Adding 8137748k swap on /dev/sda2.  Priority:-1 extents:1 across:8137748k FS
>[   12.546736] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input13
>[   12.546783] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input14
>[   12.546826] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input15
>[   12.546867] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input16
>[   12.755633] [TTM] Zone  kernel: Available graphics memory: 4085008 kiB
>[   12.755635] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
>[   12.755636] [TTM] Initializing pool allocator
>[   12.755646] [TTM] Initializing DMA pool allocator
>[   12.755679] nouveau 0000:01:00.0: DRM: VRAM: 1024 MiB
>[   12.755682] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
>[   12.755687] nouveau 0000:01:00.0: DRM: TMDS table version 2.0
>[   12.755689] nouveau 0000:01:00.0: DRM: DCB version 4.0
>[   12.755693] nouveau 0000:01:00.0: DRM: DCB outp 00: 01000302 00020030
>[   12.755696] nouveau 0000:01:00.0: DRM: DCB outp 01: 02000300 00000000
>[   12.755699] nouveau 0000:01:00.0: DRM: DCB outp 02: 01011310 00000000
>[   12.755702] nouveau 0000:01:00.0: DRM: DCB outp 03: 02022362 00020010
>[   12.755705] nouveau 0000:01:00.0: DRM: DCB conn 00: 00001030
>[   12.755707] nouveau 0000:01:00.0: DRM: DCB conn 01: 00000100
>[   12.755709] nouveau 0000:01:00.0: DRM: DCB conn 02: 00002261
>[   12.775907] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
>[   12.775908] [drm] Driver supports precise vblank timestamp query.
>[   12.810970] nouveau 0000:01:00.0: DRM: MM: using COPY for buffer copies
>[   12.890301] nouveau 0000:01:00.0: DRM: allocated 1440x900 fb: 0xd0000, bo ffff880213814c00
>[   12.890380] fbcon: nouveaufb (fb0) is primary device
>[   12.962159] Console: switching to colour frame buffer device 180x56
>[   12.963756] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
>[   12.995265] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0
>[   13.178525] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2860.bin'
>[   13.192468] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.40
>[   14.155417] IPv6: ADDRCONF(NETDEV_UP): wlp3s1: link is not ready
>[   16.495960] wlp3s1: authenticate with 14:dd:a9:84:65:98
>[   16.625178] wlp3s1: send auth to 14:dd:a9:84:65:98 (try 1/3)
>[   16.628282] wlp3s1: authenticated
>[   16.635263] wlp3s1: associate with 14:dd:a9:84:65:98 (try 1/3)
>[   16.641631] wlp3s1: RX AssocResp from 14:dd:a9:84:65:98 (capab=0x1411 status=0 aid=2)
>[   16.641717] wlp3s1: associated
>[   16.641749] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s1: link becomes ready
>[   23.944254] NFSD: starting 90-second grace period (net ffffffff81ac22c0)
>[ 1013.049324] PM: Syncing filesystems ... done.
>[ 1013.277686] PM: Preparing system for sleep (mem)
>[ 1013.277841] Freezing user space processes ... (elapsed 0.001 seconds) done.
>[ 1013.279172] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
>[ 1013.280354] PM: Suspending system (mem)
>[ 1013.280425] Suspending console(s) (use no_console_suspend to debug)
>[ 1013.281709] wlp3s1: deauthenticating from 14:dd:a9:84:65:98 by local choice (Reason: 3=DEAUTH_LEAVING)
>[ 1013.282457] sd 4:0:0:0: [sdc] Synchronizing SCSI cache
>[ 1013.282589] sd 3:0:0:0: [sdb] Synchronizing SCSI cache
>[ 1013.282676] sd 1:0:0:0: [sda] Synchronizing SCSI cache
>[ 1013.283310] nouveau 0000:01:00.0: DRM: suspending console...
>[ 1013.283313] nouveau 0000:01:00.0: DRM: suspending display...
>[ 1013.283326] nouveau 0000:01:00.0: DRM: evicting buffers...
>[ 1013.285511] e1000e: EEE TX LPI TIMER: 00000000
>[ 1013.298387] sd 1:0:0:0: [sda] Stopping disk
>[ 1013.343702] sd 3:0:0:0: [sdb] Stopping disk
>[ 1013.348958] sd 4:0:0:0: [sdc] Stopping disk
>[ 1014.211413] nouveau 0000:01:00.0: DRM: waiting for kernel channels to go idle...
>[ 1014.211444] nouveau 0000:01:00.0: DRM: suspending client object trees...
>[ 1014.211980] nouveau 0000:01:00.0: DRM: suspending kernel object tree...
>[ 1016.825862] PM: suspend of devices complete after 3545.265 msecs
>[ 1016.826247] PM: late suspend of devices complete after 0.381 msecs
>[ 1016.826900] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
>[ 1016.826939] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
>[ 1016.826994] e1000e 0000:00:19.0: System wakeup enabled by ACPI
>[ 1016.855364] PM: noirq suspend of devices complete after 29.115 msecs
>[ 1016.855873] ACPI: Preparing to enter system sleep state S3
>[ 1016.856246] PM: Saving platform NVS memory
>[ 1016.856675] Disabling non-boot CPUs ...
>[ 1016.856939] Broke affinity for irq 25
>[ 1016.857965] smpboot: CPU 1 is now offline
>[ 1016.858455] Broke affinity for irq 26
>[ 1016.859474] smpboot: CPU 2 is now offline
>[ 1016.859915] Broke affinity for irq 27
>[ 1016.860931] smpboot: CPU 3 is now offline
>[ 1016.862200] ACPI: Low-level resume complete
>[ 1016.862243] PM: Restoring platform NVS memory
>[ 1016.862747] Suspended for 3.860 seconds
>[ 1016.862788] Enabling non-boot CPUs ...
>[ 1016.862816] x86: Booting SMP configuration:
>[ 1016.862816] smpboot: Booting Node 0 Processor 1 APIC 0x2
>[ 1016.865290]  cache: parent cpu1 should not be sleeping
>[ 1016.865482] hpet: hpet3 irq 25 for MSI
>[ 1016.865555] CPU1 is up
>[ 1016.865570] smpboot: Booting Node 0 Processor 2 APIC 0x4
>[ 1016.868028]  cache: parent cpu2 should not be sleeping
>[ 1016.868248] hpet: hpet4 irq 26 for MSI
>[ 1016.868327] CPU2 is up
>[ 1016.868342] smpboot: Booting Node 0 Processor 3 APIC 0x6
>[ 1016.870804]  cache: parent cpu3 should not be sleeping
>[ 1016.871029] hpet: hpet5 irq 27 for MSI
>[ 1016.871120] CPU3 is up
>[ 1016.873520] ACPI: Waking up from system sleep state S3
>[ 1016.897154] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
>[ 1016.897635] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
>[ 1016.897688] PM: noirq resume of devices complete after 23.939 msecs
>[ 1016.897884] PM: early resume of devices complete after 0.181 msecs
>[ 1016.897973] e1000e 0000:00:19.0: System wakeup disabled by ACPI
>[ 1016.898138] rtc_cmos 00:01: System wakeup disabled by ACPI
>[ 1016.898206] nouveau 0000:01:00.0: DRM: resuming kernel object tree...
>[ 1016.908303] sd 1:0:0:0: [sda] Starting disk
>[ 1016.908321] sd 3:0:0:0: [sdb] Starting disk
>[ 1016.908323] sd 4:0:0:0: [sdc] Starting disk
>[ 1017.202993] nouveau 0000:01:00.0: DRM: resuming client object trees...
>[ 1017.203326] nouveau 0000:01:00.0: DRM: resuming display...
>[ 1017.253823] nouveau 0000:01:00.0: DRM: resuming console...
>[ 1017.387983] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[ 1017.388011] ata1: SATA link down (SStatus 0 SControl 300)
>[ 1017.388045] ata3: SATA link down (SStatus 0 SControl 300)
>[ 1017.487065] firewire_core 0000:03:03.0: rediscovered device fw0
>[ 1017.562849] ata6.00: configured for UDMA/100
>[ 1017.927370] PM: resume of devices complete after 1029.492 msecs
>[ 1017.927737] PM: Finishing wakeup.
>[ 1017.927737] Restarting tasks ... done.
>[ 1020.188052] wlp3s1: authenticate with 14:dd:a9:84:65:98
>[ 1020.317147] wlp3s1: send auth to 14:dd:a9:84:65:98 (try 1/3)
>[ 1020.319255] wlp3s1: authenticated
>[ 1020.337060] wlp3s1: associate with 14:dd:a9:84:65:98 (try 1/3)
>[ 1020.340779] wlp3s1: RX AssocResp from 14:dd:a9:84:65:98 (capab=0x1411 status=0 aid=2)
>[ 1020.340871] wlp3s1: associated
>[ 1021.787085] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[ 1021.827166] ata2.00: configured for UDMA/133
>[ 1022.396900] ata4: link is slow to respond, please be patient (ready=0)
>[ 1022.466935] ata5: link is slow to respond, please be patient (ready=0)
>[ 1024.157051] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[ 1024.268460] ata5.00: configured for UDMA/133
>[ 1024.366921] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[ 1024.469762] ata4.00: configured for UDMA/133
>[ 1078.892148] PM: Hibernation mode set to 'platform'
>[ 1078.892886] PM: Syncing filesystems ... 
>[ 1079.131384] done.
>[ 1079.131387] Freezing user space processes ... (elapsed 0.001 seconds) done.
>[ 1079.132889] PM: Marking nosave pages: [mem 0x00000000-0x00000fff]
>[ 1079.132891] PM: Marking nosave pages: [mem 0x0008f000-0x000fffff]
>[ 1079.132896] PM: Marking nosave pages: [mem 0xdf62d000-0xdf634fff]
>[ 1079.132898] PM: Marking nosave pages: [mem 0xdf66f000-0xdf6befff]
>[ 1079.132902] PM: Marking nosave pages: [mem 0xdf6d0000-0xdf7befff]
>[ 1079.132911] PM: Marking nosave pages: [mem 0xdf7e6000-0xdf7eefff]
>[ 1079.132912] PM: Marking nosave pages: [mem 0xdf7f0000-0xdf7fefff]
>[ 1079.132914] PM: Marking nosave pages: [mem 0xdf800000-0xffffffff]
>[ 1079.133635] PM: Basic memory bitmaps created
>[ 1079.133701] PM: Preallocating image memory... done (allocated 509845 pages)
>[ 1079.400501] PM: Allocated 2039380 kbytes in 0.26 seconds (7843.76 MB/s)
>[ 1079.400502] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
>[ 1079.401901] Suspending console(s) (use no_console_suspend to debug)
>[ 1079.402723] wlp3s1: deauthenticating from 14:dd:a9:84:65:98 by local choice (Reason: 3=DEAUTH_LEAVING)
>[ 1079.403136] nouveau 0000:01:00.0: DRM: suspending console...
>[ 1079.403143] nouveau 0000:01:00.0: DRM: suspending display...
>[ 1079.403156] nouveau 0000:01:00.0: DRM: evicting buffers...
>[ 1079.827506] nouveau 0000:01:00.0: DRM: waiting for kernel channels to go idle...
>[ 1079.827538] nouveau 0000:01:00.0: DRM: suspending client object trees...
>[ 1079.828078] nouveau 0000:01:00.0: DRM: suspending kernel object tree...
>[ 1082.375917] PM: freeze of devices complete after 2974.039 msecs
>[ 1082.376335] PM: late freeze of devices complete after 0.415 msecs
>[ 1082.377281] PM: noirq freeze of devices complete after 0.943 msecs
>[ 1082.377767] ACPI: Preparing to enter system sleep state S4
>[ 1082.378042] PM: Saving platform NVS memory
>[ 1082.378479] Disabling non-boot CPUs ...
>[ 1082.378755] Broke affinity for irq 25
>[ 1082.379782] smpboot: CPU 1 is now offline
>[ 1082.380269] Broke affinity for irq 26
>[ 1082.381291] smpboot: CPU 2 is now offline
>[ 1082.381689] Broke affinity for irq 27
>[ 1082.382707] smpboot: CPU 3 is now offline
>[ 1082.383049] PM: Creating hibernation image:
>[ 1082.656870] PM: Need to copy 510599 pages
>[ 1082.656873] PM: Normal pages needed: 510599 + 1024, available pages: 1583887
>[ 1082.383690] PM: Restoring platform NVS memory
>[ 1082.384183] Suspended for 57.479 seconds
>[ 1082.384232] Enabling non-boot CPUs ...
>[ 1082.384260] x86: Booting SMP configuration:
>[ 1082.384260] smpboot: Booting Node 0 Processor 1 APIC 0x2
>[ 1082.386747]  cache: parent cpu1 should not be sleeping
>[ 1082.386935] hpet: hpet3 irq 25 for MSI
>[ 1082.387025] CPU1 is up
>[ 1082.387041] smpboot: Booting Node 0 Processor 2 APIC 0x4
>[ 1082.389506]  cache: parent cpu2 should not be sleeping
>[ 1082.389694] hpet: hpet4 irq 26 for MSI
>[ 1082.389809] CPU2 is up
>[ 1082.389825] smpboot: Booting Node 0 Processor 3 APIC 0x6
>[ 1082.392293]  cache: parent cpu3 should not be sleeping
>[ 1082.392488] hpet: hpet5 irq 27 for MSI
>[ 1082.392619] CPU3 is up
>[ 1082.395021] ACPI: Waking up from system sleep state S4
>[ 1082.417557] PM: noirq restore of devices complete after 22.355 msecs
>[ 1082.417766] PM: early restore of devices complete after 0.194 msecs
>[ 1082.480660] usb usb1: root hub lost power or was reset
>[ 1082.484647] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
>[ 1082.484664] usb usb2: root hub lost power or was reset
>[ 1082.488661] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
>[ 1082.488679] nouveau 0000:01:00.0: DRM: resuming kernel object tree...
>[ 1082.488850] rtc_cmos 00:01: System wakeup disabled by ACPI
>[ 1082.491866] sd 1:0:0:0: [sda] Starting disk
>[ 1082.491867] sd 3:0:0:0: [sdb] Starting disk
>[ 1082.491873] sd 4:0:0:0: [sdc] Starting disk
>[ 1082.794401] nouveau 0000:01:00.0: DRM: resuming client object trees...
>[ 1082.794734] nouveau 0000:01:00.0: DRM: resuming display...
>[ 1082.845205] nouveau 0000:01:00.0: DRM: resuming console...
>[ 1082.867621] usb 1-1: reset high-speed USB device number 2 using ehci-pci
>[ 1082.917704] usb 2-1: reset high-speed USB device number 2 using ehci-pci
>[ 1082.978362] ata1: SATA link down (SStatus 0 SControl 300)
>[ 1082.978403] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[ 1082.978427] ata3: SATA link down (SStatus 0 SControl 300)
>[ 1082.978457] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[ 1082.978480] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[ 1082.978498] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[ 1082.981079] ata2.00: configured for UDMA/133
>[ 1082.981722] ata4.00: configured for UDMA/133
>[ 1082.982249] ata5.00: configured for UDMA/133
>[ 1082.982305] ata6.00: configured for UDMA/100
>[ 1083.067523] firewire_core 0000:03:03.0: rediscovered device fw0
>[ 1083.637569] usb 2-1.7: reset low-speed USB device number 4 using ehci-pci
>[ 1084.267534] usb 2-1.4: reset low-speed USB device number 3 using ehci-pci
>[ 1084.620675] PM: restore of devices complete after 2140.198 msecs
>[ 1084.620965] PM: Image restored successfully.
>[ 1084.620984] PM: Basic memory bitmaps freed
>[ 1084.620985] Restarting tasks ... done.
>[ 1086.828610] wlp3s1: authenticate with 14:dd:a9:84:65:98
>[ 1086.947663] wlp3s1: send auth to 14:dd:a9:84:65:98 (try 1/3)
>[ 1086.949236] wlp3s1: authenticated
>[ 1086.957560] wlp3s1: associate with 14:dd:a9:84:65:98 (try 1/3)
>[ 1086.963498] wlp3s1: RX AssocResp from 14:dd:a9:84:65:98 (capab=0x1411 status=0 aid=2)
>[ 1086.963590] wlp3s1: associated
>[ 1753.387080] perf: interrupt took too long (2509 > 2500), lowering kernel.perf_event_max_sample_rate to 79700
>[ 2906.535706] perf: interrupt took too long (3148 > 3136), lowering kernel.perf_event_max_sample_rate to 63500
>[10777.343351] wlp3s1: authenticate with 14:dd:a9:84:65:98
>[10777.462969] wlp3s1: send auth to 14:dd:a9:84:65:98 (try 1/3)
>[10777.464516] wlp3s1: authenticated
>[10777.473001] wlp3s1: associate with 14:dd:a9:84:65:98 (try 1/3)
>[10777.476692] wlp3s1: RX AssocResp from 14:dd:a9:84:65:98 (capab=0x1411 status=0 aid=2)
>[10777.476761] wlp3s1: associated
>[12405.613551] TCP: wlp3s1: Driver has suspect GRO implementation, TCP performance may be compromised.
>[29375.692764] CE: hpet5 increased min_delta_ns to 20115 nsec
>[29417.443314] wlp3s1: authenticate with 14:dd:a9:84:65:98
>[29417.562562] wlp3s1: send auth to 14:dd:a9:84:65:98 (try 1/3)
>[29417.564328] wlp3s1: authenticated
>[29417.572525] wlp3s1: associate with 14:dd:a9:84:65:98 (try 1/3)
>[29417.576433] wlp3s1: RX AssocResp from 14:dd:a9:84:65:98 (capab=0x1411 status=0 aid=2)
>[29417.576524] wlp3s1: associated
>[29463.463001] wlp3s1: authenticate with 14:dd:a9:84:65:98
>[29463.592186] wlp3s1: send auth to 14:dd:a9:84:65:98 (try 1/3)
>[29463.594670] wlp3s1: authenticated
>[29463.602111] wlp3s1: associate with 14:dd:a9:84:65:98 (try 1/3)
>[29463.606425] wlp3s1: RX AssocResp from 14:dd:a9:84:65:98 (capab=0x1411 status=0 aid=2)
>[29463.606516] wlp3s1: associated
>[29623.231361] wlp3s1: authenticate with 14:dd:a9:84:65:98
>[29623.350584] wlp3s1: send auth to 14:dd:a9:84:65:98 (try 1/3)
>[29623.365361] wlp3s1: authenticated
>[29623.370589] wlp3s1: associate with 14:dd:a9:84:65:98 (try 1/3)
>[29623.377912] wlp3s1: RX AssocResp from 14:dd:a9:84:65:98 (capab=0x1411 status=0 aid=2)
>[29623.378004] wlp3s1: associated
>[32916.241461] wlp3s1: authenticate with 14:dd:a9:84:65:98
>[32916.361076] wlp3s1: send auth to 14:dd:a9:84:65:98 (try 1/3)
>[32916.362630] wlp3s1: authenticated
>[32916.371018] wlp3s1: associate with 14:dd:a9:84:65:98 (try 1/3)
>[32916.378243] wlp3s1: RX AssocResp from 14:dd:a9:84:65:98 (capab=0x1411 status=0 aid=2)
>[32916.378326] wlp3s1: associated
>[38615.023315] PM: Hibernation mode set to 'platform'
>[38615.024086] PM: Syncing filesystems ... 
>[38615.221739] done.
>[38615.221741] Freezing user space processes ... (elapsed 0.001 seconds) done.
>[38615.223326] PM: Marking nosave pages: [mem 0x00000000-0x00000fff]
>[38615.223328] PM: Marking nosave pages: [mem 0x0008f000-0x000fffff]
>[38615.223333] PM: Marking nosave pages: [mem 0xdf62d000-0xdf634fff]
>[38615.223335] PM: Marking nosave pages: [mem 0xdf66f000-0xdf6befff]
>[38615.223339] PM: Marking nosave pages: [mem 0xdf6d0000-0xdf7befff]
>[38615.223348] PM: Marking nosave pages: [mem 0xdf7e6000-0xdf7eefff]
>[38615.223350] PM: Marking nosave pages: [mem 0xdf7f0000-0xdf7fefff]
>[38615.223351] PM: Marking nosave pages: [mem 0xdf800000-0xffffffff]
>[38615.224071] PM: Basic memory bitmaps created
>[38615.224144] PM: Preallocating image memory... done (allocated 755853 pages)
>[38617.087688] PM: Allocated 3023412 kbytes in 1.86 seconds (1625.49 MB/s)
>[38617.087689] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
>[38617.089066] Suspending console(s) (use no_console_suspend to debug)
>[38617.089455] wlp3s1: deauthenticating from 14:dd:a9:84:65:98 by local choice (Reason: 3=DEAUTH_LEAVING)
>[38617.090194] nouveau 0000:01:00.0: DRM: suspending console...
>[38617.090204] nouveau 0000:01:00.0: DRM: suspending display...
>[38617.090224] nouveau 0000:01:00.0: DRM: evicting buffers...
>[38618.767569] nouveau 0000:01:00.0: DRM: waiting for kernel channels to go idle...
>[38618.767603] nouveau 0000:01:00.0: DRM: suspending client object trees...
>[38618.768170] nouveau 0000:01:00.0: DRM: suspending kernel object tree...
>[38621.369054] PM: freeze of devices complete after 4280.016 msecs
>[38621.369450] PM: late freeze of devices complete after 0.392 msecs
>[38621.370313] PM: noirq freeze of devices complete after 0.861 msecs
>[38621.370781] ACPI: Preparing to enter system sleep state S4
>[38621.371053] PM: Saving platform NVS memory
>[38621.371492] Disabling non-boot CPUs ...
>[38621.371720] Broke affinity for irq 25
>[38621.372748] smpboot: CPU 1 is now offline
>[38621.373250] Broke affinity for irq 26
>[38621.374267] smpboot: CPU 2 is now offline
>[38621.374695] Broke affinity for irq 27
>[38621.375711] smpboot: CPU 3 is now offline
>[38621.376078] PM: Creating hibernation image:
>[38621.462036] PM: Need to copy 772825 pages
>[38621.462039] PM: Normal pages needed: 772825 + 1024, available pages: 1321660
>[38621.376727] PM: Restoring platform NVS memory
>[38621.377237] Suspended for 28734.862 seconds
>[38621.377286] Enabling non-boot CPUs ...
>[38621.377313] x86: Booting SMP configuration:
>[38621.377313] smpboot: Booting Node 0 Processor 1 APIC 0x2
>[38621.379785]  cache: parent cpu1 should not be sleeping
>[38621.379973] hpet: hpet3 irq 25 for MSI
>[38621.380070] CPU1 is up
>[38621.380085] smpboot: Booting Node 0 Processor 2 APIC 0x4
>[38621.382543]  cache: parent cpu2 should not be sleeping
>[38621.382732] hpet: hpet4 irq 26 for MSI
>[38621.382858] CPU2 is up
>[38621.382872] smpboot: Booting Node 0 Processor 3 APIC 0x6
>[38621.385328]  cache: parent cpu3 should not be sleeping
>[38621.385515] hpet: hpet5 irq 27 for MSI
>[38621.385645] CPU3 is up
>[38621.388040] ACPI: Waking up from system sleep state S4
>[38621.414340] PM: noirq restore of devices complete after 26.118 msecs
>[38621.414579] PM: early restore of devices complete after 0.224 msecs
>[38621.500000] usb usb1: root hub lost power or was reset
>[38621.503925] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
>[38621.503946] usb usb2: root hub lost power or was reset
>[38621.507926] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
>[38621.507944] nouveau 0000:01:00.0: DRM: resuming kernel object tree...
>[38621.509439] sd 1:0:0:0: [sda] Starting disk
>[38621.509457] sd 3:0:0:0: [sdb] Starting disk
>[38621.509467] sd 4:0:0:0: [sdc] Starting disk
>[38621.514291] rtc_cmos 00:01: System wakeup disabled by ACPI
>[38621.811890] nouveau 0000:01:00.0: DRM: resuming client object trees...
>[38621.812221] nouveau 0000:01:00.0: DRM: resuming display...
>[38621.862753] nouveau 0000:01:00.0: DRM: resuming console...
>[38621.884364] usb 1-1: reset high-speed USB device number 2 using ehci-pci
>[38621.924412] usb 2-1: reset high-speed USB device number 2 using ehci-pci
>[38621.989240] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[38621.989273] ata3: SATA link down (SStatus 0 SControl 300)
>[38621.989303] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[38621.989328] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[38621.991900] ata2.00: configured for UDMA/133
>[38621.992717] ata4.00: configured for UDMA/133
>[38621.993515] ata5.00: configured for UDMA/133
>[38621.994337] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[38621.994368] ata1: SATA link down (SStatus 0 SControl 300)
>[38621.998052] ata6.00: configured for UDMA/100
>[38622.094344] firewire_core 0000:03:03.0: rediscovered device fw0
>[38622.644380] usb 2-1.7: reset low-speed USB device number 4 using ehci-pci
>[38623.274377] usb 2-1.4: reset low-speed USB device number 3 using ehci-pci
>[38623.627672] PM: restore of devices complete after 2127.842 msecs
>[38623.627945] PM: Image restored successfully.
>[38623.627971] PM: Basic memory bitmaps freed
>[38623.627972] Restarting tasks ... done.
>[38625.855518] wlp3s1: authenticate with 14:dd:a9:84:65:98
>[38625.974468] wlp3s1: send auth to 14:dd:a9:84:65:98 (try 1/3)
>[38625.980900] wlp3s1: authenticated
>[38625.984431] wlp3s1: associate with 14:dd:a9:84:65:98 (try 1/3)
>[38625.990062] wlp3s1: RX AssocResp from 14:dd:a9:84:65:98 (capab=0x1411 status=0 aid=1)
>[38625.990155] wlp3s1: associated
>[40027.353996] wlp3s1: authenticate with 14:dd:a9:84:65:98
>[40027.473101] wlp3s1: send auth to 14:dd:a9:84:65:98 (try 1/3)
>[40027.482530] wlp3s1: authenticated
>[40027.482997] wlp3s1: associate with 14:dd:a9:84:65:98 (try 1/3)
>[40027.496799] wlp3s1: RX AssocResp from 14:dd:a9:84:65:98 (capab=0x1411 status=0 aid=1)
>[40027.496890] wlp3s1: associated
>[42773.230533] wlp3s1: authenticate with 14:dd:a9:84:65:98
>[42773.350212] wlp3s1: send auth to 14:dd:a9:84:65:98 (try 1/3)
>[42773.360387] wlp3s1: authenticated
>[42773.370144] wlp3s1: associate with 14:dd:a9:84:65:98 (try 1/3)
>[42773.376369] wlp3s1: RX AssocResp from 14:dd:a9:84:65:98 (capab=0x1411 status=0 aid=1)
>[42773.376462] wlp3s1: associated
>[46303.529390] perf: interrupt took too long (3941 > 3935), lowering kernel.perf_event_max_sample_rate to 50700
>[78182.244842] CE: hpet3 increased min_delta_ns to 20115 nsec
>[95721.665778] PM: Hibernation mode set to 'platform'
>[95721.677811] PM: Syncing filesystems ... 
>[95721.904743] done.
>[95721.904745] Freezing user space processes ... (elapsed 0.015 seconds) done.
>[95721.920796] PM: Marking nosave pages: [mem 0x00000000-0x00000fff]
>[95721.920798] PM: Marking nosave pages: [mem 0x0008f000-0x000fffff]
>[95721.920804] PM: Marking nosave pages: [mem 0xdf62d000-0xdf634fff]
>[95721.920805] PM: Marking nosave pages: [mem 0xdf66f000-0xdf6befff]
>[95721.920809] PM: Marking nosave pages: [mem 0xdf6d0000-0xdf7befff]
>[95721.920818] PM: Marking nosave pages: [mem 0xdf7e6000-0xdf7eefff]
>[95721.920820] PM: Marking nosave pages: [mem 0xdf7f0000-0xdf7fefff]
>[95721.920822] PM: Marking nosave pages: [mem 0xdf800000-0xffffffff]
>[95721.921541] PM: Basic memory bitmaps created
>[95721.921614] PM: Preallocating image memory... done (allocated 744971 pages)
>[95725.368507] PM: Allocated 2979884 kbytes in 3.44 seconds (866.24 MB/s)
>[95725.368508] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
>[95725.369896] Suspending console(s) (use no_console_suspend to debug)
>[95725.370717] wlp3s1: deauthenticating from 14:dd:a9:84:65:98 by local choice (Reason: 3=DEAUTH_LEAVING)
>[95725.372876] nouveau 0000:01:00.0: DRM: suspending console...
>[95725.372882] nouveau 0000:01:00.0: DRM: suspending display...
>[95725.372896] nouveau 0000:01:00.0: DRM: evicting buffers...
>[95727.390546] nouveau 0000:01:00.0: DRM: waiting for kernel channels to go idle...
>[95727.390581] nouveau 0000:01:00.0: DRM: suspending client object trees...
>[95727.391121] nouveau 0000:01:00.0: DRM: suspending kernel object tree...
>[95729.935246] PM: freeze of devices complete after 4565.382 msecs
>[95729.935493] PM: late freeze of devices complete after 0.245 msecs
>[95729.936077] PM: noirq freeze of devices complete after 0.582 msecs
>[95729.936547] ACPI: Preparing to enter system sleep state S4
>[95729.936822] PM: Saving platform NVS memory
>[95729.937258] Disabling non-boot CPUs ...
>[95729.937519] Broke affinity for irq 25
>[95729.938536] smpboot: CPU 1 is now offline
>[95729.939049] Broke affinity for irq 26
>[95729.940067] smpboot: CPU 2 is now offline
>[95729.940508] Broke affinity for irq 27
>[95729.941524] smpboot: CPU 3 is now offline
>[95729.941873] PM: Creating hibernation image:
>[95730.029767] PM: Need to copy 761915 pages
>[95730.029769] PM: Normal pages needed: 761915 + 1024, available pages: 1332581
>[95729.942525] PM: Restoring platform NVS memory
>[95729.943036] Suspended for 36185.338 seconds
>[95729.943085] Enabling non-boot CPUs ...
>[95729.943112] x86: Booting SMP configuration:
>[95729.943113] smpboot: Booting Node 0 Processor 1 APIC 0x2
>[95729.945586]  cache: parent cpu1 should not be sleeping
>[95729.945776] hpet: hpet3 irq 25 for MSI
>[95729.945874] CPU1 is up
>[95729.945889] smpboot: Booting Node 0 Processor 2 APIC 0x4
>[95729.948344]  cache: parent cpu2 should not be sleeping
>[95729.948533] hpet: hpet4 irq 26 for MSI
>[95729.948653] CPU2 is up
>[95729.948668] smpboot: Booting Node 0 Processor 3 APIC 0x6
>[95729.951126]  cache: parent cpu3 should not be sleeping
>[95729.951320] hpet: hpet5 irq 27 for MSI
>[95729.951458] CPU3 is up
>[95729.953861] ACPI: Waking up from system sleep state S4
>[95729.976698] PM: noirq restore of devices complete after 22.656 msecs
>[95729.976892] PM: early restore of devices complete after 0.179 msecs
>[95730.060199] usb usb1: root hub lost power or was reset
>[95730.064163] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
>[95730.064177] usb usb2: root hub lost power or was reset
>[95730.068168] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
>[95730.068179] nouveau 0000:01:00.0: DRM: resuming kernel object tree...
>[95730.068341] rtc_cmos 00:01: System wakeup disabled by ACPI
>[95730.078365] sd 1:0:0:0: [sda] Starting disk
>[95730.078367] sd 4:0:0:0: [sdc] Starting disk
>[95730.078376] sd 3:0:0:0: [sdb] Starting disk
>[95730.372739] nouveau 0000:01:00.0: DRM: resuming client object trees...
>[95730.373069] nouveau 0000:01:00.0: DRM: resuming display...
>[95730.423593] nouveau 0000:01:00.0: DRM: resuming console...
>[95730.446722] usb 1-1: reset high-speed USB device number 2 using ehci-pci
>[95730.486798] usb 2-1: reset high-speed USB device number 2 using ehci-pci
>[95730.556897] ata3: SATA link down (SStatus 0 SControl 300)
>[95730.556927] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[95730.556954] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[95730.556976] ata1: SATA link down (SStatus 0 SControl 300)
>[95730.556996] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[95730.559151] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[95730.559930] ata2.00: configured for UDMA/133
>[95730.560622] ata6.00: configured for UDMA/100
>[95730.560667] ata4.00: configured for UDMA/133
>[95730.563395] ata5.00: configured for UDMA/133
>[95730.646796] firewire_core 0000:03:03.0: rediscovered device fw0
>[95731.206731] usb 2-1.4: reset low-speed USB device number 3 using ehci-pci
>[95731.836728] usb 2-1.7: reset low-speed USB device number 4 using ehci-pci
>[95732.181812] PM: restore of devices complete after 2121.786 msecs
>[95732.182162] PM: Image restored successfully.
>[95732.182179] PM: Basic memory bitmaps freed
>[95732.182180] Restarting tasks ... done.
>[95733.964539] nouveau 0000:01:00.0: gr: DATA_ERROR 00000005 [INVALID_ENUM]
>[95733.964608] nouveau 0000:01:00.0: gr: 00100000 [] ch 3 [003fb26000 systemd-logind[320]] subc 7 class 8597 mthd 1360 data 000000fe
>[95734.658608] wlp3s1: authenticate with 14:dd:a9:84:65:98
>[95734.776822] wlp3s1: send auth to 14:dd:a9:84:65:98 (try 1/3)
>[95734.778399] wlp3s1: authenticated
>[95734.786741] wlp3s1: associate with 14:dd:a9:84:65:98 (try 1/3)
>[95734.790743] wlp3s1: RX AssocResp from 14:dd:a9:84:65:98 (capab=0x1411 status=0 aid=3)
>[95734.790829] wlp3s1: associated

Actions: View

Attachments on bug 100357: 130400 | 130401

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.