Attachment 139789 Details for Bug 106666 – dmesg

dmesg

hung.txt (text/plain), 75.33 KB, created by udo on 2018-05-26 11:30:19 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: udo

Created: 2018-05-26 11:30:19 UTC

Size: 75.33 KB

patch

obsolete

>[    0.000000] Linux version 4.16.11 (root@surfplank2.hierzo) (gcc version 8.1.1 20180502 (Red Hat 8.1.1-1) (GCC)) #9 SMP PREEMPT Thu May 24 07:48:14 CEST 2018
>[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.16.11 ro root=/dev/myvg/rootlv noexec=on noexec32=on vga=0x0F01 SYSFONT=latarcyrheb-sun16 LANG=en_US.UTF-8 KEYTABLE=us acpi_enforce_resources=lax fbcon=font:VGA8x16 radeon.pcie_gen2=1 cgroup_disable=memory threadirqs plymouth.enable=0 rd.plymouth=0 mce=dont_log_ce panic=0 rd.lvm.vg=myvg radeon.dpm=1 zswap.enabled=1 rd.auto=1 audit=0 systemd.log_level=warning ip=192.168.10.70::192.168.10.98:255.255.255.0:::off:192.168.10.98 rd.neednet=1 net.ifnames=0 initrd=/initramfs-4.16.11.img
>[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
>[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
>[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
>[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
>[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format.
>[    0.000000] e820: BIOS-provided physical RAM map:
>[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
>[    0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000003ffffff] usable
>[    0.000000] BIOS-e820: [mem 0x0000000004000000-0x0000000004009fff] ACPI NVS
>[    0.000000] BIOS-e820: [mem 0x000000000400a000-0x0000000009cfffff] usable
>[    0.000000] BIOS-e820: [mem 0x0000000009d00000-0x0000000009ffffff] reserved
>[    0.000000] BIOS-e820: [mem 0x000000000a000000-0x000000000affffff] usable
>[    0.000000] BIOS-e820: [mem 0x000000000b000000-0x000000000b01ffff] reserved
>[    0.000000] BIOS-e820: [mem 0x000000000b020000-0x00000000db678fff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000db679000-0x00000000db79ffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000db7a0000-0x00000000db8cafff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000db8cb000-0x00000000dbc9cfff] ACPI NVS
>[    0.000000] BIOS-e820: [mem 0x00000000dbc9d000-0x00000000dceb4fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000dceb5000-0x00000000deffffff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000df000000-0x00000000dfffffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fd800000-0x00000000fdffffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fec30000-0x00000000fec30fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000003deffffff] usable
>[    0.000000] BIOS-e820: [mem 0x00000003df000000-0x000000041effffff] reserved
>[    0.000000] NX (Execute Disable) protection: active
>[    0.000000] SMBIOS 3.1.1 present.
>[    0.000000] DMI: Gigabyte Technology Co., Ltd. X470 AORUS ULTRA GAMING/X470 AORUS ULTRA GAMING-CF, BIOS F2 03/14/2018
>[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
>[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
>[    0.000000] e820: last_pfn = 0x3df000 max_arch_pfn = 0x400000000
>[    0.000000] MTRR default type: uncachable
>[    0.000000] MTRR fixed ranges enabled:
>[    0.000000]   00000-9FFFF write-back
>[    0.000000]   A0000-BFFFF write-through
>[    0.000000]   C0000-FFFFF write-protect
>[    0.000000] MTRR variable ranges enabled:
>[    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
>[    0.000000]   1 base 000080000000 mask FFFFC0000000 write-back
>[    0.000000]   2 base 0000C0000000 mask FFFFE0000000 write-back
>[    0.000000]   3 disabled
>[    0.000000]   4 disabled
>[    0.000000]   5 disabled
>[    0.000000]   6 disabled
>[    0.000000]   7 disabled
>[    0.000000] TOM2: 0000000420000000 aka 16896M
>[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
>[    0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
>[    0.000000] e820: last_pfn = 0xdf000 max_arch_pfn = 0x400000000
>[    0.000000] Scanning 1 areas for low memory corruption
>[    0.000000] Base memory trampoline at [        (ptrval)] 97000 size 24576
>[    0.000000] Using GB pages for direct mapping
>[    0.000000] BRK [0x2c03eb000, 0x2c03ebfff] PGTABLE
>[    0.000000] BRK [0x2c03ec000, 0x2c03ecfff] PGTABLE
>[    0.000000] BRK [0x2c03ed000, 0x2c03edfff] PGTABLE
>[    0.000000] BRK [0x2c03ee000, 0x2c03eefff] PGTABLE
>[    0.000000] BRK [0x2c03ef000, 0x2c03effff] PGTABLE
>[    0.000000] BRK [0x2c03f0000, 0x2c03f0fff] PGTABLE
>[    0.000000] BRK [0x2c03f1000, 0x2c03f1fff] PGTABLE
>[    0.000000] BRK [0x2c03f2000, 0x2c03f2fff] PGTABLE
>[    0.000000] BRK [0x2c03f3000, 0x2c03f3fff] PGTABLE
>[    0.000000] BRK [0x2c03f4000, 0x2c03f4fff] PGTABLE
>[    0.000000] BRK [0x2c03f5000, 0x2c03f5fff] PGTABLE
>[    0.000000] BRK [0x2c03f6000, 0x2c03f6fff] PGTABLE
>[    0.000000] RAMDISK: [mem 0x7ea82000-0x7fffffff]
>[    0.000000] ACPI: Early table checksum verification disabled
>[    0.000000] ACPI: RSDP 0x00000000000F05B0 000024 (v02 ALASKA)
>[    0.000000] ACPI: XSDT 0x00000000DB8CB098 0000B4 (v01 ALASKA A M I    01072009 AMI  00010013)
>[    0.000000] ACPI: FACP 0x00000000DB8D1A10 000114 (v06 ALASKA A M I    01072009 AMI  00010013)
>[    0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20180105/tbfadt-658)
>[    0.000000] ACPI: DSDT 0x00000000DB8CB1E8 006822 (v02 ALASKA A M I    01072009 INTL 20120913)
>[    0.000000] ACPI: FACS 0x00000000DBC86E00 000040
>[    0.000000] ACPI: APIC 0x00000000DB8D1B28 0000DE (v03 ALASKA A M I    01072009 AMI  00010013)
>[    0.000000] ACPI: FPDT 0x00000000DB8D1C08 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
>[    0.000000] ACPI: FIDT 0x00000000DB8D1C50 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
>[    0.000000] ACPI: SSDT 0x00000000DB8D1CF0 005367 (v02 AMD    AmdTable 00000002 MSFT 02000002)
>[    0.000000] ACPI: SSDT 0x00000000DB8D7058 00119C (v01 AMD    AMD CPU  00000001 AMD  00000001)
>[    0.000000] ACPI: CRAT 0x00000000DB8D81F8 000810 (v01 AMD    AMD CRAT 00000001 AMD  00000001)
>[    0.000000] ACPI: CDIT 0x00000000DB8D8A08 000029 (v01 AMD    AMD CDIT 00000001 AMD  00000001)
>[    0.000000] ACPI: SSDT 0x00000000DB8D8A38 002E6E (v01 AMD    AMD AOD  00000001 INTL 20120913)
>[    0.000000] ACPI: MCFG 0x00000000DB8DB8A8 00003C (v01 ALASKA A M I    01072009 MSFT 00010013)
>[    0.000000] ACPI: HPET 0x00000000DB8DB8E8 000038 (v01 ALASKA A M I    01072009 AMI  00000005)
>[    0.000000] ACPI: UEFI 0x00000000DB8DB920 000042 (v01                 00000000      00000000)
>[    0.000000] ACPI: IVRS 0x00000000DB8DB968 0000D0 (v02 AMD    AMD IVRS 00000001 AMD  00000000)
>[    0.000000] ACPI: SSDT 0x00000000DB8DBA38 0000F8 (v01 AMD    AMD PT   00001000 INTL 20120913)
>[    0.000000] ACPI: SSDT 0x00000000DB8DBB30 000E96 (v01 AMD    AmdTable 00000001 INTL 20120913)
>[    0.000000] ACPI: SSDT 0x00000000DB8DC9C8 000850 (v01 AMD    AmdTable 00000001 INTL 20120913)
>[    0.000000] ACPI: SSDT 0x00000000DB8DD218 001A41 (v01 AMD    AmdTable 00000001 INTL 20120913)
>[    0.000000] ACPI: WSMT 0x00000000DB8DEC60 000028 (v01 ALASKA A M I    01072009 AMI  00010013)
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] tsc: Fast TSC calibration failed
>[    0.000000] tsc: Using PIT calibration value
>[    0.000000] Zone ranges:
>[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
>[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
>[    0.000000]   Normal   [mem 0x0000000100000000-0x00000003deffffff]
>[    0.000000] Movable zone start for each node
>[    0.000000] Early memory node ranges
>[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
>[    0.000000]   node   0: [mem 0x0000000000100000-0x0000000003ffffff]
>[    0.000000]   node   0: [mem 0x000000000400a000-0x0000000009cfffff]
>[    0.000000]   node   0: [mem 0x000000000a000000-0x000000000affffff]
>[    0.000000]   node   0: [mem 0x000000000b020000-0x00000000db678fff]
>[    0.000000]   node   0: [mem 0x00000000db7a0000-0x00000000db8cafff]
>[    0.000000]   node   0: [mem 0x00000000dceb5000-0x00000000deffffff]
>[    0.000000]   node   0: [mem 0x0000000100000000-0x00000003deffffff]
>[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000003deffffff]
>[    0.000000] On node 0 totalpages: 3917153
>[    0.000000]   DMA zone: 56 pages used for memmap
>[    0.000000]   DMA zone: 21 pages reserved
>[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
>[    0.000000]   DMA32 zone: 12341 pages used for memmap
>[    0.000000]   DMA32 zone: 902597 pages, LIFO batch:31
>[    0.000000]   Normal zone: 41160 pages used for memmap
>[    0.000000]   Normal zone: 3010560 pages, LIFO batch:31
>[    0.000000] Reserved but unavailable: 100 pages
>[    0.000000] ACPI: PM-Timer IO Port: 0x808
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
>[    0.000000] IOAPIC[0]: apic_id 9, version 33, address 0xfec00000, GSI 0-23
>[    0.000000] IOAPIC[1]: apic_id 10, version 33, address 0xfec01000, GSI 24-55
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
>[    0.000000] ACPI: IRQ0 used by override.
>[    0.000000] ACPI: IRQ9 used by override.
>[    0.000000] Using ACPI (MADT) for SMP configuration information
>[    0.000000] ACPI: HPET id: 0x10228201 base: 0xfed00000
>[    0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
>[    0.000000] e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices
>[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
>[    0.000000] random: get_random_bytes called from start_kernel+0x8a/0x447 with crng_init=0
>[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
>[    0.000000] percpu: Embedded 42 pages/cpu @        (ptrval) s132696 r8192 d31144 u262144
>[    0.000000] pcpu-alloc: s132696 r8192 d31144 u262144 alloc=1*2097152
>[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
>[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 3863575
>[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.16.11 ro root=/dev/myvg/rootlv noexec=on noexec32=on vga=0x0F01 SYSFONT=latarcyrheb-sun16 LANG=en_US.UTF-8 KEYTABLE=us acpi_enforce_resources=lax fbcon=font:VGA8x16 radeon.pcie_gen2=1 cgroup_disable=memory threadirqs plymouth.enable=0 rd.plymouth=0 mce=dont_log_ce panic=0 rd.lvm.vg=myvg radeon.dpm=1 zswap.enabled=1 rd.auto=1 audit=0 systemd.log_level=warning ip=192.168.10.70::192.168.10.98:255.255.255.0:::off:192.168.10.98 rd.neednet=1 net.ifnames=0 initrd=/initramfs-4.16.11.img
>[    0.000000] audit: disabled (until reboot)
>[    0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
>[    0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
>[    0.000000] Memory: 15317056K/15668612K available (10248K kernel code, 557K rwdata, 2300K rodata, 944K init, 388K bss, 351556K reserved, 0K cma-reserved)
>[    0.000000] Preemptible hierarchical RCU implementation.
>[    0.000000] 	RCU event tracing is enabled.
>[    0.000000] 	Tasks RCU enabled.
>[    0.000000] NR_IRQS: 4352, nr_irqs: 1032, preallocated irqs: 16
>[    0.000000] Console: colour VGA+ 80x50
>[    0.000000] console [tty0] enabled
>[    0.000000] ACPI: Core revision 20180105
>[    0.000000] ACPI BIOS Error (bug): Failure creating [\_SB.SMIC], AE_ALREADY_EXISTS (20180105/dswload-380)
>[    0.000000] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20180105/psobject-252)
>[    0.000000] ACPI Error: AE_ALREADY_EXISTS, (SSDT:  AMD PT) while loading table (20180105/tbxfload-228)
>[    0.000000] ACPI Error: 1 table load failures, 7 successful (20180105/tbxfload-246)
>[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
>[    0.000000] hpet clockevent registered
>[    0.000000] APIC: Switch to symmetric I/O mode setup
>[    0.004000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>[    0.024000] tsc: Fast TSC calibration failed
>[    0.032000] tsc: PIT calibration matches HPET. 1 loops
>[    0.032000] tsc: Detected 3600.053 MHz processor
>[    0.032000] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x33e4859ad6f, max_idle_ns: 440795315104 ns
>[    0.032000] Calibrating delay loop (skipped), value calculated using timer frequency.. 7200.10 BogoMIPS (lpj=14400212)
>[    0.032000] pid_max: default: 32768 minimum: 301
>[    0.032000] Security Framework initialized
>[    0.032000] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
>[    0.036019] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
>[    0.036558] CPU: Physical Processor ID: 0
>[    0.036738] CPU: Processor Core ID: 0
>[    0.037015] mce: CPU supports 23 MCE banks
>[    0.037213] LVT offset 1 assigned for vector 0xf9
>[    0.037435] LVT offset 2 assigned for vector 0xf4
>[    0.037629] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512
>[    0.037827] Last level dTLB entries: 4KB 1536, 2MB 1536, 4MB 768, 1GB 0
>[    0.040002] Spectre V2 : Mitigation: Full AMD retpoline
>[    0.040191] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
>[    0.040467] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
>[    0.047085] Freeing SMP alternatives memory: 28K
>[    0.052000] smpboot: CPU0: AMD Ryzen 5 2400G with Radeon Vega Graphics (family: 0x17, model: 0x11, stepping: 0x0)
>[    0.064008] Performance Events: Fam17h core perfctr, AMD PMU driver.
>[    0.064242] ... version:                0
>[    0.064429] ... bit width:              48
>[    0.064610] ... generic registers:      6
>[    0.064788] ... value mask:             0000ffffffffffff
>[    0.064980] ... max period:             00007fffffffffff
>[    0.065171] ... fixed-purpose events:   0
>[    0.065348] ... event mask:             000000000000003f
>[    0.072004] Hierarchical SRCU implementation.
>[    0.083334] MCE: In-kernel MCE decoding enabled.
>[    0.088003] smp: Bringing up secondary CPUs ...
>[    0.116019] x86: Booting SMP configuration:
>[    0.116208] .... node  #0, CPUs:      #1 #2 #3 #4 #5 #6 #7
>[    0.286213] smp: Brought up 1 node, 8 CPUs
>[    0.286213] smpboot: Max logical packages: 1
>[    0.286213] smpboot: Total of 8 processors activated (57600.84 BogoMIPS)
>[    0.288003] devtmpfs: initialized
>[    0.288390] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
>[    0.288390] futex hash table entries: 2048 (order: 5, 131072 bytes)
>[    0.288581] xor: automatically using best checksumming function   avx       
>[    0.289468] NET: Registered protocol family 16
>[    0.289849] cpuidle: using governor ladder
>[    0.289849] cpuidle: using governor menu
>[    0.289849] ACPI: bus type PCI registered
>[    0.289849] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
>[    0.289849] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
>[    0.289849] PCI: Using configuration type 1 for base access
>[    0.292817] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
>[    0.292817] cryptd: max_cpu_qlen set to 1000
>[    0.360005] raid6: sse2x1   gen()  8753 MB/s
>[    0.428004] raid6: sse2x1   xor()  9545 MB/s
>[    0.496003] raid6: sse2x2   gen() 18102 MB/s
>[    0.564001] raid6: sse2x2   xor() 11582 MB/s
>[    0.632001] raid6: sse2x4   gen() 18610 MB/s
>[    0.700002] raid6: sse2x4   xor() 11141 MB/s
>[    0.768001] raid6: avx2x1   gen() 20154 MB/s
>[    0.836001] raid6: avx2x1   xor() 15621 MB/s
>[    0.904001] raid6: avx2x2   gen() 25103 MB/s
>[    0.972001] raid6: avx2x2   xor() 16681 MB/s
>[    1.040001] raid6: avx2x4   gen() 26821 MB/s
>[    1.108003] raid6: avx2x4   xor() 16409 MB/s
>[    1.108195] raid6: using algorithm avx2x4 gen() 26821 MB/s
>[    1.108390] raid6: .... xor() 16409 MB/s, rmw enabled
>[    1.108581] raid6: using avx2x2 recovery algorithm
>[    1.108816] ACPI: Added _OSI(Module Device)
>[    1.108816] ACPI: Added _OSI(Processor Device)
>[    1.108816] ACPI: Added _OSI(3.0 _SCP Extensions)
>[    1.108816] ACPI: Added _OSI(Processor Aggregator Device)
>[    1.108868] ACPI BIOS Error (bug): Failure looking up [\PTOS], AE_NOT_FOUND (20180105/psargs-364)
>[    1.108868] ACPI Error: Method parse/execution failed \, AE_NOT_FOUND (20180105/psparse-550)
>[    1.108868] ACPI: Executed 2 blocks of module-level executable AML code
>[    1.112334] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
>[    1.113588] ACPI: Interpreter enabled
>[    1.113769] ACPI: (supports S0 S5)
>[    1.113936] ACPI: Using IOAPIC for interrupt routing
>[    1.114360] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>[    1.114810] ACPI: Enabled 3 GPEs in block 00 to 1F
>[    1.116756] ACPI: Power Resource [P0ST] (on)
>[    1.116972] ACPI: Power Resource [P3ST] (on)
>[    1.120711] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
>[    1.120918] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
>[    1.121327] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
>[    1.121603] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
>[    1.122033] PCI host bridge to bus 0000:00
>[    1.122218] pci_bus 0000:00: root bus resource [io  0x0000-0x03af window]
>[    1.122425] pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7 window]
>[    1.122632] pci_bus 0000:00: root bus resource [io  0x03b0-0x03df window]
>[    1.122839] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
>[    1.123046] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
>[    1.123311] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
>[    1.123577] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfec2ffff window]
>[    1.123841] pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window]
>[    1.124003] pci_bus 0000:00: root bus resource [bus 00-ff]
>[    1.124203] pci 0000:00:00.0: [1022:15d0] type 00 class 0x060000
>[    1.124308] pci 0000:00:00.2: [1022:15d1] type 00 class 0x080600
>[    1.124442] pci 0000:00:01.0: [1022:1452] type 00 class 0x060000
>[    1.124532] pci 0000:00:01.2: [1022:15d3] type 01 class 0x060400
>[    1.124634] pci 0000:00:01.2: PME# supported from D0 D3hot D3cold
>[    1.124724] pci 0000:00:08.0: [1022:1452] type 00 class 0x060000
>[    1.124819] pci 0000:00:08.1: [1022:15db] type 01 class 0x060400
>[    1.124870] pci 0000:00:08.1: enabling Extended Tags
>[    1.125114] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
>[    1.125177] pci 0000:00:08.2: [1022:15dc] type 01 class 0x060400
>[    1.125226] pci 0000:00:08.2: enabling Extended Tags
>[    1.125464] pci 0000:00:08.2: PME# supported from D0 D3hot D3cold
>[    1.125552] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
>[    1.125706] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
>[    1.125866] pci 0000:00:18.0: [1022:15e8] type 00 class 0x060000
>[    1.125896] pci 0000:00:18.1: [1022:15e9] type 00 class 0x060000
>[    1.125948] pci 0000:00:18.2: [1022:15ea] type 00 class 0x060000
>[    1.125985] pci 0000:00:18.3: [1022:15eb] type 00 class 0x060000
>[    1.126022] pci 0000:00:18.4: [1022:15ec] type 00 class 0x060000
>[    1.126052] pci 0000:00:18.5: [1022:15ed] type 00 class 0x060000
>[    1.126089] pci 0000:00:18.6: [1022:15ee] type 00 class 0x060000
>[    1.126127] pci 0000:00:18.7: [1022:15ef] type 00 class 0x060000
>[    1.126225] pci 0000:01:00.0: [1022:43d0] type 00 class 0x0c0330
>[    1.126254] pci 0000:01:00.0: reg 0x10: [mem 0xfe8a0000-0xfe8a7fff 64bit]
>[    1.126354] pci 0000:01:00.0: PME# supported from D3hot D3cold
>[    1.126421] pci 0000:01:00.1: [1022:43c8] type 00 class 0x010601
>[    1.126482] pci 0000:01:00.1: reg 0x24: [mem 0xfe880000-0xfe89ffff]
>[    1.126491] pci 0000:01:00.1: reg 0x30: [mem 0xfe800000-0xfe87ffff pref]
>[    1.126541] pci 0000:01:00.1: PME# supported from D3hot D3cold
>[    1.126596] pci 0000:01:00.2: [1022:43c6] type 01 class 0x060400
>[    1.126692] pci 0000:01:00.2: PME# supported from D3hot D3cold
>[    1.140026] pci 0000:00:01.2: PCI bridge to [bus 01-08]
>[    1.140231] pci 0000:00:01.2:   bridge window [io  0xd000-0xefff]
>[    1.140235] pci 0000:00:01.2:   bridge window [mem 0xfe500000-0xfe8fffff]
>[    1.140327] pci 0000:02:00.0: [1022:43c7] type 01 class 0x060400
>[    1.140443] pci 0000:02:00.0: PME# supported from D3hot D3cold
>[    1.140523] pci 0000:02:01.0: [1022:43c7] type 01 class 0x060400
>[    1.140638] pci 0000:02:01.0: PME# supported from D3hot D3cold
>[    1.140718] pci 0000:02:02.0: [1022:43c7] type 01 class 0x060400
>[    1.140833] pci 0000:02:02.0: PME# supported from D3hot D3cold
>[    1.140905] pci 0000:02:03.0: [1022:43c7] type 01 class 0x060400
>[    1.141020] pci 0000:02:03.0: PME# supported from D3hot D3cold
>[    1.141093] pci 0000:02:04.0: [1022:43c7] type 01 class 0x060400
>[    1.141208] pci 0000:02:04.0: PME# supported from D3hot D3cold
>[    1.141287] pci 0000:02:09.0: [1022:43c7] type 01 class 0x060400
>[    1.141402] pci 0000:02:09.0: PME# supported from D3hot D3cold
>[    1.141489] pci 0000:01:00.2: PCI bridge to [bus 02-08]
>[    1.141694] pci 0000:01:00.2:   bridge window [io  0xd000-0xefff]
>[    1.141698] pci 0000:01:00.2:   bridge window [mem 0xfe500000-0xfe7fffff]
>[    1.141772] pci 0000:03:00.0: [9710:9922] type 00 class 0x070002
>[    1.141820] pci 0000:03:00.0: reg 0x10: [io  0xe010-0xe017]
>[    1.141840] pci 0000:03:00.0: reg 0x14: [mem 0xfe703000-0xfe703fff]
>[    1.141913] pci 0000:03:00.0: reg 0x24: [mem 0xfe702000-0xfe702fff]
>[    1.142050] pci 0000:03:00.0: PME# supported from D3hot D3cold
>[    1.142144] pci 0000:03:00.1: [9710:9922] type 00 class 0x070002
>[    1.142189] pci 0000:03:00.1: reg 0x10: [io  0xe000-0xe007]
>[    1.142209] pci 0000:03:00.1: reg 0x14: [mem 0xfe701000-0xfe701fff]
>[    1.142282] pci 0000:03:00.1: reg 0x24: [mem 0xfe700000-0xfe700fff]
>[    1.142403] pci 0000:03:00.1: PME# supported from D3hot D3cold
>[    1.156024] pci 0000:02:00.0: PCI bridge to [bus 03]
>[    1.156220] pci 0000:02:00.0:   bridge window [io  0xe000-0xefff]
>[    1.156223] pci 0000:02:00.0:   bridge window [mem 0xfe700000-0xfe7fffff]
>[    1.156276] pci 0000:02:01.0: PCI bridge to [bus 04]
>[    1.156517] pci 0000:02:02.0: PCI bridge to [bus 05]
>[    1.156794] pci 0000:06:00.0: [8086:1539] type 00 class 0x020000
>[    1.156845] pci 0000:06:00.0: reg 0x10: [mem 0xfe600000-0xfe61ffff]
>[    1.156882] pci 0000:06:00.0: reg 0x18: [io  0xd000-0xd01f]
>[    1.156901] pci 0000:06:00.0: reg 0x1c: [mem 0xfe620000-0xfe623fff]
>[    1.157092] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
>[    1.168031] pci 0000:02:03.0: PCI bridge to [bus 06]
>[    1.168234] pci 0000:02:03.0:   bridge window [io  0xd000-0xdfff]
>[    1.168237] pci 0000:02:03.0:   bridge window [mem 0xfe600000-0xfe6fffff]
>[    1.168281] pci 0000:02:04.0: PCI bridge to [bus 07]
>[    1.168544] pci 0000:08:00.0: [1b21:1343] type 00 class 0x0c0330
>[    1.168593] pci 0000:08:00.0: reg 0x10: [mem 0xfe500000-0xfe507fff 64bit]
>[    1.168773] pci 0000:08:00.0: PME# supported from D3hot D3cold
>[    1.180023] pci 0000:02:09.0: PCI bridge to [bus 08]
>[    1.180212] pci 0000:02:09.0:   bridge window [mem 0xfe500000-0xfe5fffff]
>[    1.180322] pci 0000:09:00.0: [1002:15dd] type 00 class 0x030000
>[    1.180369] pci 0000:09:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
>[    1.180387] pci 0000:09:00.0: reg 0x18: [mem 0xf0000000-0xf01fffff 64bit pref]
>[    1.180399] pci 0000:09:00.0: reg 0x20: [io  0xf000-0xf0ff]
>[    1.180411] pci 0000:09:00.0: reg 0x24: [mem 0xfe400000-0xfe47ffff]
>[    1.180431] pci 0000:09:00.0: enabling Extended Tags
>[    1.180724] pci 0000:09:00.0: PME# supported from D1 D2 D3hot D3cold
>[    1.180828] pci 0000:09:00.1: [1002:15de] type 00 class 0x040300
>[    1.180858] pci 0000:09:00.1: reg 0x10: [mem 0xfe488000-0xfe48bfff]
>[    1.180929] pci 0000:09:00.1: enabling Extended Tags
>[    1.181184] pci 0000:09:00.1: PME# supported from D1 D2 D3hot D3cold
>[    1.181251] pci 0000:09:00.2: [1022:15df] type 00 class 0x108000
>[    1.181301] pci 0000:09:00.2: reg 0x18: [mem 0xfe300000-0xfe3fffff]
>[    1.181334] pci 0000:09:00.2: reg 0x24: [mem 0xfe48c000-0xfe48dfff]
>[    1.181354] pci 0000:09:00.2: enabling Extended Tags
>[    1.181681] pci 0000:09:00.3: [1022:15e0] type 00 class 0x0c0330
>[    1.181716] pci 0000:09:00.3: reg 0x10: [mem 0xfe200000-0xfe2fffff 64bit]
>[    1.181777] pci 0000:09:00.3: enabling Extended Tags
>[    1.182040] pci 0000:09:00.3: PME# supported from D0 D3hot D3cold
>[    1.182109] pci 0000:09:00.4: [1022:15e1] type 00 class 0x0c0330
>[    1.182144] pci 0000:09:00.4: reg 0x10: [mem 0xfe100000-0xfe1fffff 64bit]
>[    1.182205] pci 0000:09:00.4: enabling Extended Tags
>[    1.182467] pci 0000:09:00.4: PME# supported from D0 D3hot D3cold
>[    1.182543] pci 0000:09:00.6: [1022:15e3] type 00 class 0x040300
>[    1.182572] pci 0000:09:00.6: reg 0x10: [mem 0xfe480000-0xfe487fff]
>[    1.182644] pci 0000:09:00.6: enabling Extended Tags
>[    1.182899] pci 0000:09:00.6: PME# supported from D0 D3hot D3cold
>[    1.183036] pci 0000:00:08.1: PCI bridge to [bus 09]
>[    1.183228] pci 0000:00:08.1:   bridge window [io  0xf000-0xffff]
>[    1.183232] pci 0000:00:08.1:   bridge window [mem 0xfe100000-0xfe4fffff]
>[    1.183237] pci 0000:00:08.1:   bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
>[    1.183302] pci 0000:0a:00.0: [1022:7901] type 00 class 0x010601
>[    1.183384] pci 0000:0a:00.0: reg 0x24: [mem 0xfe900000-0xfe9007ff]
>[    1.183404] pci 0000:0a:00.0: enabling Extended Tags
>[    1.183665] pci 0000:0a:00.0: PME# supported from D3hot D3cold
>[    1.183763] pci 0000:00:08.2: PCI bridge to [bus 0a]
>[    1.183957] pci 0000:00:08.2:   bridge window [mem 0xfe900000-0xfe9fffff]
>[    1.183990] pci_bus 0000:00: on NUMA node 0
>[    1.184269] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
>[    1.184526] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
>[    1.184774] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
>[    1.185035] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
>[    1.185289] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
>[    1.185535] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
>[    1.185786] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
>[    1.186029] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
>[    1.188022] pci 0000:09:00.0: vgaarb: setting as boot VGA device
>[    1.188215] pci 0000:09:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
>[    1.188493] pci 0000:09:00.0: vgaarb: bridge control possible
>[    1.188689] vgaarb: loaded
>[    1.188943] SCSI subsystem initialized
>[    1.189130] libata version 3.00 loaded.
>[    1.189130] ACPI: bus type USB registered
>[    1.189130] usbcore: registered new interface driver usbfs
>[    1.189130] usbcore: registered new interface driver hub
>[    1.189130] usbcore: registered new device driver usb
>[    1.189130] pps_core: LinuxPPS API ver. 1 registered
>[    1.189130] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
>[    1.189130] EDAC MC: Ver: 3.0.0
>[    1.189130] PCI: Using ACPI for IRQ routing
>[    1.192722] PCI: pci_cache_line_size set to 64 bytes
>[    1.192832] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
>[    1.192833] e820: reserve RAM buffer [mem 0x09d00000-0x0bffffff]
>[    1.192834] e820: reserve RAM buffer [mem 0x0b000000-0x0bffffff]
>[    1.192834] e820: reserve RAM buffer [mem 0xdb679000-0xdbffffff]
>[    1.192835] e820: reserve RAM buffer [mem 0xdb8cb000-0xdbffffff]
>[    1.192835] e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff]
>[    1.192836] e820: reserve RAM buffer [mem 0x3df000000-0x3dfffffff]
>[    1.193000] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>[    1.193186] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
>[    1.196006] clocksource: Switched to clocksource tsc-early
>[    1.196006] VFS: Disk quotas dquot_6.6.0
>[    1.196463] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>[    1.196757] pnp: PnP ACPI init
>[    1.196985] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
>[    1.197197] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
>[    1.197253] system 00:01: [mem 0xfeb80000-0xfebfffff] could not be reserved
>[    1.197469] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    1.197533] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
>[    1.197633] system 00:03: [io  0x0a00-0x0a2f] has been reserved
>[    1.197835] system 00:03: [io  0x0a30-0x0a3f] has been reserved
>[    1.198033] system 00:03: [io  0x0a40-0x0a4f] has been reserved
>[    1.198232] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    1.198396] system 00:04: [io  0x04d0-0x04d1] has been reserved
>[    1.198599] system 00:04: [io  0x040b] has been reserved
>[    1.198789] system 00:04: [io  0x04d6] has been reserved
>[    1.198980] system 00:04: [io  0x0c00-0x0c01] has been reserved
>[    1.199178] system 00:04: [io  0x0c14] has been reserved
>[    1.199368] system 00:04: [io  0x0c50-0x0c51] has been reserved
>[    1.199566] system 00:04: [io  0x0c52] has been reserved
>[    1.199757] system 00:04: [io  0x0c6c] has been reserved
>[    1.199948] system 00:04: [io  0x0c6f] has been reserved
>[    1.203122] system 00:04: [io  0x0cd0-0x0cd1] has been reserved
>[    1.203240] system 00:04: [io  0x0cd2-0x0cd3] has been reserved
>[    1.203358] system 00:04: [io  0x0cd4-0x0cd5] has been reserved
>[    1.203475] system 00:04: [io  0x0cd6-0x0cd7] has been reserved
>[    1.203593] system 00:04: [io  0x0cd8-0x0cdf] has been reserved
>[    1.203711] system 00:04: [io  0x0800-0x089f] has been reserved
>[    1.203829] system 00:04: [io  0x0b00-0x0b0f] has been reserved
>[    1.203946] system 00:04: [io  0x0b20-0x0b3f] has been reserved
>[    1.204061] system 00:04: [io  0x0900-0x090f] has been reserved
>[    1.204170] system 00:04: [io  0x0910-0x091f] has been reserved
>[    1.204279] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
>[    1.204394] system 00:04: [mem 0xfec01000-0xfec01fff] could not be reserved
>[    1.204509] system 00:04: [mem 0xfedc0000-0xfedc0fff] has been reserved
>[    1.204622] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved
>[    1.204734] system 00:04: [mem 0xfed80000-0xfed8ffff] could not be reserved
>[    1.204849] system 00:04: [mem 0xfec10000-0xfec10fff] has been reserved
>[    1.204962] system 00:04: [mem 0xff000000-0xffffffff] has been reserved
>[    1.205076] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    1.205318] pnp: PnP ACPI: found 5 devices
>[    1.211040] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
>[    1.211248] pci 0000:02:00.0: PCI bridge to [bus 03]
>[    1.211356] pci 0000:02:00.0:   bridge window [io  0xe000-0xefff]
>[    1.211466] pci 0000:02:00.0:   bridge window [mem 0xfe700000-0xfe7fffff]
>[    1.211581] pci 0000:02:01.0: PCI bridge to [bus 04]
>[    1.211691] pci 0000:02:02.0: PCI bridge to [bus 05]
>[    1.211800] pci 0000:02:03.0: PCI bridge to [bus 06]
>[    1.211903] pci 0000:02:03.0:   bridge window [io  0xd000-0xdfff]
>[    1.212016] pci 0000:02:03.0:   bridge window [mem 0xfe600000-0xfe6fffff]
>[    1.212131] pci 0000:02:04.0: PCI bridge to [bus 07]
>[    1.212240] pci 0000:02:09.0: PCI bridge to [bus 08]
>[    1.212345] pci 0000:02:09.0:   bridge window [mem 0xfe500000-0xfe5fffff]
>[    1.212460] pci 0000:01:00.2: PCI bridge to [bus 02-08]
>[    1.212564] pci 0000:01:00.2:   bridge window [io  0xd000-0xefff]
>[    1.212673] pci 0000:01:00.2:   bridge window [mem 0xfe500000-0xfe7fffff]
>[    1.212788] pci 0000:00:01.2: PCI bridge to [bus 01-08]
>[    1.212891] pci 0000:00:01.2:   bridge window [io  0xd000-0xefff]
>[    1.213000] pci 0000:00:01.2:   bridge window [mem 0xfe500000-0xfe8fffff]
>[    1.213114] pci 0000:00:08.1: PCI bridge to [bus 09]
>[    1.213216] pci 0000:00:08.1:   bridge window [io  0xf000-0xffff]
>[    1.213325] pci 0000:00:08.1:   bridge window [mem 0xfe100000-0xfe4fffff]
>[    1.213436] pci 0000:00:08.1:   bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
>[    1.213586] pci 0000:00:08.2: PCI bridge to [bus 0a]
>[    1.213690] pci 0000:00:08.2:   bridge window [mem 0xfe900000-0xfe9fffff]
>[    1.213804] pci_bus 0000:00: resource 4 [io  0x0000-0x03af window]
>[    1.213805] pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7 window]
>[    1.213806] pci_bus 0000:00: resource 6 [io  0x03b0-0x03df window]
>[    1.213807] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
>[    1.213807] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
>[    1.213808] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
>[    1.213809] pci_bus 0000:00: resource 10 [mem 0xe0000000-0xfec2ffff window]
>[    1.213810] pci_bus 0000:00: resource 11 [mem 0xfee00000-0xffffffff window]
>[    1.213811] pci_bus 0000:01: resource 0 [io  0xd000-0xefff]
>[    1.213812] pci_bus 0000:01: resource 1 [mem 0xfe500000-0xfe8fffff]
>[    1.213813] pci_bus 0000:02: resource 0 [io  0xd000-0xefff]
>[    1.213813] pci_bus 0000:02: resource 1 [mem 0xfe500000-0xfe7fffff]
>[    1.213814] pci_bus 0000:03: resource 0 [io  0xe000-0xefff]
>[    1.213815] pci_bus 0000:03: resource 1 [mem 0xfe700000-0xfe7fffff]
>[    1.213816] pci_bus 0000:06: resource 0 [io  0xd000-0xdfff]
>[    1.213817] pci_bus 0000:06: resource 1 [mem 0xfe600000-0xfe6fffff]
>[    1.213818] pci_bus 0000:08: resource 1 [mem 0xfe500000-0xfe5fffff]
>[    1.213819] pci_bus 0000:09: resource 0 [io  0xf000-0xffff]
>[    1.213819] pci_bus 0000:09: resource 1 [mem 0xfe100000-0xfe4fffff]
>[    1.213820] pci_bus 0000:09: resource 2 [mem 0xe0000000-0xf01fffff 64bit pref]
>[    1.213821] pci_bus 0000:0a: resource 1 [mem 0xfe900000-0xfe9fffff]
>[    1.213956] NET: Registered protocol family 2
>[    1.214262] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes)
>[    1.214427] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>[    1.214679] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>[    1.214877] TCP: Hash tables configured (established 131072 bind 65536)
>[    1.215035] UDP hash table entries: 8192 (order: 6, 262144 bytes)
>[    1.215167] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
>[    1.215364] NET: Registered protocol family 1
>[    1.215706] pci 0000:09:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
>[    1.216032] PCI: CLS 64 bytes, default 64
>[    1.216061] Trying to unpack rootfs image as initramfs...
>[    1.457883] Freeing initrd memory: 22008K
>[    1.458092] AMD-Vi: IOMMU performance counters supported
>[    1.458348] pci 0000:00:00.2: can't derive routing for PCI INT A
>[    1.458552] pci 0000:00:00.2: PCI INT A: not connected
>[    1.459483] iommu: Adding device 0000:00:01.0 to group 0
>[    1.460078] iommu: Adding device 0000:00:01.2 to group 1
>[    1.460675] iommu: Adding device 0000:00:08.0 to group 2
>[    1.461233] iommu: Adding device 0000:00:08.1 to group 3
>[    1.461440] iommu: Adding device 0000:00:08.2 to group 2
>[    1.462008] iommu: Adding device 0000:00:14.0 to group 4
>[    1.462212] iommu: Adding device 0000:00:14.3 to group 4
>[    1.462802] iommu: Adding device 0000:00:18.0 to group 5
>[    1.463006] iommu: Adding device 0000:00:18.1 to group 5
>[    1.463209] iommu: Adding device 0000:00:18.2 to group 5
>[    1.463412] iommu: Adding device 0000:00:18.3 to group 5
>[    1.463615] iommu: Adding device 0000:00:18.4 to group 5
>[    1.463819] iommu: Adding device 0000:00:18.5 to group 5
>[    1.464026] iommu: Adding device 0000:00:18.6 to group 5
>[    1.464229] iommu: Adding device 0000:00:18.7 to group 5
>[    1.464820] iommu: Adding device 0000:01:00.0 to group 6
>[    1.465036] iommu: Adding device 0000:01:00.1 to group 6
>[    1.465251] iommu: Adding device 0000:01:00.2 to group 6
>[    1.465457] iommu: Adding device 0000:02:00.0 to group 6
>[    1.465662] iommu: Adding device 0000:02:01.0 to group 6
>[    1.465866] iommu: Adding device 0000:02:02.0 to group 6
>[    1.466070] iommu: Adding device 0000:02:03.0 to group 6
>[    1.466289] iommu: Adding device 0000:02:04.0 to group 6
>[    1.466494] iommu: Adding device 0000:02:09.0 to group 6
>[    1.466703] iommu: Adding device 0000:03:00.0 to group 6
>[    1.466909] iommu: Adding device 0000:03:00.1 to group 6
>[    1.467120] iommu: Adding device 0000:06:00.0 to group 6
>[    1.467332] iommu: Adding device 0000:08:00.0 to group 6
>[    1.467976] iommu: Adding device 0000:09:00.0 to group 7
>[    1.468242] iommu: Using direct mapping for device 0000:09:00.0
>[    1.468513] iommu: Adding device 0000:09:00.1 to group 8
>[    1.468733] iommu: Adding device 0000:09:00.2 to group 8
>[    1.468954] iommu: Adding device 0000:09:00.3 to group 8
>[    1.469175] iommu: Adding device 0000:09:00.4 to group 8
>[    1.469395] iommu: Adding device 0000:09:00.6 to group 8
>[    1.469584] iommu: Adding device 0000:0a:00.0 to group 2
>[    1.469944] AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
>[    1.470112] AMD-Vi: Extended features (0x4f77ef22294ada):
>[    1.470281]  PPR NX GT IA GA PC GA_vAPIC
>[    1.470436] AMD-Vi: Interrupt remapping enabled
>[    1.470596] AMD-Vi: virtual APIC enabled
>[    1.532013] AMD-Vi: Lazy IO/TLB flushing enabled
>[    1.532964] amd_uncore: AMD NB counters detected
>[    1.533157] amd_uncore: AMD LLC counters detected
>[    1.533636] perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank).
>[    1.533870] Scanning for low memory corruption every 60 seconds
>[    1.560061] Initialise system trusted keyrings
>[    1.560336] workingset: timestamp_bits=62 max_order=22 bucket_order=0
>[    1.720460] NET: Registered protocol family 38
>[    1.720653] Key type asymmetric registered
>[    1.720831] Asymmetric key parser 'x509' registered
>[    1.721051] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
>[    1.721321] io scheduler noop registered (default)
>[    1.723665] pcieport 0000:00:01.2: AER enabled with IRQ 28
>[    1.723914] Monitor-Mwait will be used to enter C-1 state
>[    1.724736] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
>[    1.747430] 0000:03:00.0: ttyS0 at I/O 0xe010 (irq = 32, base_baud = 115200) is a ST16650V2
>[    1.769994] 0000:03:00.1: ttyS1 at I/O 0xe000 (irq = 25, base_baud = 115200) is a ST16650V2
>[    1.771850] brd: module loaded
>[    1.773546] loop: module loaded
>[    1.773755] ahci 0000:01:00.1: version 3.0
>[    1.773846] ahci 0000:01:00.1: SSS flag set, parallel bus scan disabled
>[    1.774126] ahci 0000:01:00.1: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0xff impl SATA mode
>[    1.774405] ahci 0000:01:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst 
>[    1.775270] scsi host0: ahci
>[    1.775529] scsi host1: ahci
>[    1.775755] scsi host2: ahci
>[    1.775994] scsi host3: ahci
>[    1.776259] scsi host4: ahci
>[    1.776531] scsi host5: ahci
>[    1.776804] scsi host6: ahci
>[    1.777075] scsi host7: ahci
>[    1.777263] ata1: SATA max UDMA/133 abar m131072@0xfe880000 port 0xfe880100 irq 40
>[    1.777533] ata2: SATA max UDMA/133 abar m131072@0xfe880000 port 0xfe880180 irq 40
>[    1.777801] ata3: SATA max UDMA/133 abar m131072@0xfe880000 port 0xfe880200 irq 40
>[    1.778071] ata4: SATA max UDMA/133 abar m131072@0xfe880000 port 0xfe880280 irq 40
>[    1.778340] ata5: SATA max UDMA/133 abar m131072@0xfe880000 port 0xfe880300 irq 40
>[    1.778609] ata6: SATA max UDMA/133 abar m131072@0xfe880000 port 0xfe880380 irq 40
>[    1.778877] ata7: SATA max UDMA/133 abar m131072@0xfe880000 port 0xfe880400 irq 40
>[    1.779147] ata8: SATA max UDMA/133 abar m131072@0xfe880000 port 0xfe880480 irq 40
>[    1.779636] ahci 0000:0a:00.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
>[    1.779929] ahci 0000:0a:00.0: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part sxs 
>[    1.783648] ahci 0000:0a:00.0: both AHCI_HFLAG_MULTI_MSI flag set and custom irq handler implemented
>[    1.784228] scsi host8: ahci
>[    1.784478] scsi host9: ahci
>[    1.784662] ata9: SATA max UDMA/133 abar m2048@0xfe900000 port 0xfe900100 irq 42
>[    1.784927] ata10: SATA max UDMA/133 abar m2048@0xfe900000 port 0xfe900180 irq 43
>[    1.785212] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
>[    1.785449] igb: Copyright (c) 2007-2014 Intel Corporation.
>[    2.018261] igb 0000:06:00.0: Intel(R) Gigabit Ethernet Network Connection
>[    2.018477] igb 0000:06:00.0: eth0: (PCIe:2.5Gb/s:Width x1) e0:d5:5e:a3:6b:35
>[    2.018691] igb 0000:06:00.0: eth0: PBA No: FFFFFF-0FF
>[    2.018883] igb 0000:06:00.0: Using MSI-X interrupts. 2 rx queue(s), 2 tx queue(s)
>[    2.019196] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>[    2.019416] ehci-pci: EHCI PCI platform driver
>[    2.019606] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>[    2.019808] ohci-pci: OHCI PCI platform driver
>[    2.020055] xhci_hcd 0000:01:00.0: xHCI Host Controller
>[    2.020255] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
>[    2.073508] xhci_hcd 0000:01:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x00000410
>[    2.074450] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>[    2.074666] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    2.074928] usb usb1: Product: xHCI Host Controller
>[    2.075113] usb usb1: Manufacturer: Linux 4.16.11 xhci-hcd
>[    2.075305] usb usb1: SerialNumber: 0000:01:00.0
>[    2.075575] hub 1-0:1.0: USB hub found
>[    2.075766] hub 1-0:1.0: 14 ports detected
>[    2.076195] xhci_hcd 0000:01:00.0: xHCI Host Controller
>[    2.076391] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
>[    2.076655] xhci_hcd 0000:01:00.0: Host supports USB 3.1 Enhanced SuperSpeed
>[    2.076897] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
>[    2.077193] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
>[    2.077402] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    2.077663] usb usb2: Product: xHCI Host Controller
>[    2.077848] usb usb2: Manufacturer: Linux 4.16.11 xhci-hcd
>[    2.078041] usb usb2: SerialNumber: 0000:01:00.0
>[    2.078280] hub 2-0:1.0: USB hub found
>[    2.078464] hub 2-0:1.0: 8 ports detected
>[    2.078685] usb: port power management may be unreliable
>[    2.079039] xhci_hcd 0000:08:00.0: xHCI Host Controller
>[    2.079236] xhci_hcd 0000:08:00.0: new USB bus registered, assigned bus number 3
>[    2.099193] ata9: SATA link down (SStatus 0 SControl 300)
>[    2.099464] ata10: SATA link down (SStatus 0 SControl 300)
>[    2.138422] xhci_hcd 0000:08:00.0: hcc params 0x0200eec1 hci version 0x110 quirks 0x00000010
>[    2.139840] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
>[    2.140060] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    2.140320] usb usb3: Product: xHCI Host Controller
>[    2.140506] usb usb3: Manufacturer: Linux 4.16.11 xhci-hcd
>[    2.140699] usb usb3: SerialNumber: 0000:08:00.0
>[    2.140941] hub 3-0:1.0: USB hub found
>[    2.141124] hub 3-0:1.0: 2 ports detected
>[    2.141355] xhci_hcd 0000:08:00.0: xHCI Host Controller
>[    2.141557] xhci_hcd 0000:08:00.0: new USB bus registered, assigned bus number 4
>[    2.141821] xhci_hcd 0000:08:00.0: Host supports USB 3.1 Enhanced SuperSpeed
>[    2.142052] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
>[    2.142342] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
>[    2.142549] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    2.142811] usb usb4: Product: xHCI Host Controller
>[    2.142997] usb usb4: Manufacturer: Linux 4.16.11 xhci-hcd
>[    2.143189] usb usb4: SerialNumber: 0000:08:00.0
>[    2.143421] hub 4-0:1.0: USB hub found
>[    2.143607] hub 4-0:1.0: 2 ports detected
>[    2.143890] xhci_hcd 0000:09:00.3: xHCI Host Controller
>[    2.144087] xhci_hcd 0000:09:00.3: new USB bus registered, assigned bus number 5
>[    2.144552] xhci_hcd 0000:09:00.3: hcc params 0x0270ffe5 hci version 0x110 quirks 0x40000410
>[    2.145626] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
>[    2.145838] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    2.146100] usb usb5: Product: xHCI Host Controller
>[    2.146286] usb usb5: Manufacturer: Linux 4.16.11 xhci-hcd
>[    2.146479] usb usb5: SerialNumber: 0000:09:00.3
>[    2.146716] hub 5-0:1.0: USB hub found
>[    2.146901] hub 5-0:1.0: 4 ports detected
>[    2.147320] xhci_hcd 0000:09:00.3: xHCI Host Controller
>[    2.147520] xhci_hcd 0000:09:00.3: new USB bus registered, assigned bus number 6
>[    2.147784] xhci_hcd 0000:09:00.3: Host supports USB 3.1 Enhanced SuperSpeed
>[    2.148024] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
>[    2.148313] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
>[    2.148519] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    2.148782] usb usb6: Product: xHCI Host Controller
>[    2.148967] usb usb6: Manufacturer: Linux 4.16.11 xhci-hcd
>[    2.149159] usb usb6: SerialNumber: 0000:09:00.3
>[    2.149408] hub 6-0:1.0: USB hub found
>[    2.149593] hub 6-0:1.0: 4 ports detected
>[    2.150089] xhci_hcd 0000:09:00.4: xHCI Host Controller
>[    2.150280] xhci_hcd 0000:09:00.4: new USB bus registered, assigned bus number 7
>[    2.150712] xhci_hcd 0000:09:00.4: hcc params 0x0260ffe5 hci version 0x110 quirks 0x40000410
>[    2.151746] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
>[    2.151962] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    2.152230] usb usb7: Product: xHCI Host Controller
>[    2.152415] usb usb7: Manufacturer: Linux 4.16.11 xhci-hcd
>[    2.152607] usb usb7: SerialNumber: 0000:09:00.4
>[    2.152859] hub 7-0:1.0: USB hub found
>[    2.153039] hub 7-0:1.0: 1 port detected
>[    2.153255] xhci_hcd 0000:09:00.4: xHCI Host Controller
>[    2.153445] xhci_hcd 0000:09:00.4: new USB bus registered, assigned bus number 8
>[    2.153634] xhci_hcd 0000:09:00.4: Host supports USB 3.1 Enhanced SuperSpeed
>[    2.153780] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM.
>[    2.153957] usb usb8: New USB device found, idVendor=1d6b, idProduct=0003
>[    2.154081] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    2.154241] usb usb8: Product: xHCI Host Controller
>[    2.154354] usb usb8: Manufacturer: Linux 4.16.11 xhci-hcd
>[    2.154470] usb usb8: SerialNumber: 0000:09:00.4
>[    2.154636] hub 8-0:1.0: USB hub found
>[    2.154751] hub 8-0:1.0: 1 port detected
>[    2.154916] i8042: PNP: No PS/2 controller found.
>[    2.155053] mousedev: PS/2 mouse device common for all mice
>[    2.155223] input: PC Speaker as /devices/platform/pcspkr/input/input0
>[    2.155366] rtc_cmos 00:02: RTC can wake from S4
>[    2.155557] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
>[    2.155741] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
>[    2.155914] pps_ldisc: PPS line discipline registered
>[    2.156109] device-mapper: uevent: version 1.0.3
>[    2.156257] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
>[    2.156646] NET: Registered protocol family 10
>[    2.157035] Segment Routing with IPv6
>[    2.157153] NET: Registered protocol family 17
>[    2.157279] Key type dns_resolver registered
>[    2.158206] microcode: CPU0: patch_level=0x08101007
>[    2.158319] microcode: CPU1: patch_level=0x08101007
>[    2.158433] microcode: CPU2: patch_level=0x08101007
>[    2.158543] microcode: CPU3: patch_level=0x08101007
>[    2.158650] microcode: CPU4: patch_level=0x08101007
>[    2.158757] microcode: CPU5: patch_level=0x08101007
>[    2.158878] microcode: CPU6: patch_level=0x08101007
>[    2.158990] microcode: CPU7: patch_level=0x08101007
>[    2.159115] microcode: Microcode Update Driver: v2.2.
>[    2.159132] sched_clock: Marking stable (2159112616, 0)->(2242408195, -83295579)
>[    2.162302] registered taskstats version 1
>[    2.162404] Loading compiled-in X.509 certificates
>[    2.162972] rtc_cmos 00:02: setting system clock to 2018-05-25 16:27:09 UTC (1527265629)
>[    2.256045] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[    2.257388] ata1.00: ATA-8: TOSHIBA DT01ACA200, MX4OABB0, max UDMA/133
>[    2.257603] ata1.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
>[    2.259086] ata1.00: configured for UDMA/133
>[    2.259367] scsi 0:0:0:0: Direct-Access     ATA      TOSHIBA DT01ACA2 ABB0 PQ: 0 ANSI: 5
>[    2.259830] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
>[    2.260100] sd 0:0:0:0: [sda] 4096-byte physical blocks
>[    2.260294] sd 0:0:0:0: [sda] Write Protect is off
>[    2.260478] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[    2.260491] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    2.267555]  sda: sda1 sda2 sda4
>[    2.267893] sd 0:0:0:0: [sda] Attached SCSI disk
>[    2.416013] usb 1-4: new high-speed USB device number 2 using xhci_hcd
>[    2.556017] tsc: Refined TSC clocksource calibration: 3600.032 MHz
>[    2.556225] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x33e471e1c72, max_idle_ns: 440795309359 ns
>[    2.556568] clocksource: Switched to clocksource tsc
>[    2.736070] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[    2.737437] ata2.00: ATA-8: ST2000DM001-1CH164, CC26, max UDMA/133
>[    2.737646] ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
>[    2.738800] ata2.00: configured for UDMA/133
>[    2.739152] scsi 1:0:0:0: Direct-Access     ATA      ST2000DM001-1CH1 CC26 PQ: 0 ANSI: 5
>[    2.739626] sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
>[    2.739897] sd 1:0:0:0: [sdb] 4096-byte physical blocks
>[    2.740115] sd 1:0:0:0: [sdb] Write Protect is off
>[    2.740304] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>[    2.740322] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    2.755733]  sdb: sdb1 sdb2 sdb4
>[    2.756218] sd 1:0:0:0: [sdb] Attached SCSI disk
>[    2.823813] usb 1-4: New USB device found, idVendor=046d, idProduct=082c
>[    2.824061] usb 1-4: New USB device strings: Mfr=0, Product=2, SerialNumber=1
>[    2.824289] usb 1-4: Product: HD Webcam C615
>[    2.824480] usb 1-4: SerialNumber: F6629A60
>[    2.956338] usb 1-9: new low-speed USB device number 3 using xhci_hcd
>[    3.216067] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[    3.217694] ata3.00: ATA-8: TOSHIBA DT01ACA200, MX4OABB0, max UDMA/133
>[    3.217906] ata3.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
>[    3.219766] ata3.00: configured for UDMA/133
>[    3.220086] scsi 2:0:0:0: Direct-Access     ATA      TOSHIBA DT01ACA2 ABB0 PQ: 0 ANSI: 5
>[    3.220558] sd 2:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
>[    3.220634] usb 1-9: New USB device found, idVendor=046d, idProduct=c312
>[    3.220855] sd 2:0:0:0: [sdc] 4096-byte physical blocks
>[    3.221064] usb 1-9: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    3.221267] sd 2:0:0:0: [sdc] Write Protect is off
>[    3.221469] usb 1-9: Product: USB Multimedia Keyboard
>[    3.221654] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
>[    3.221666] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    3.221843] usb 1-9: Manufacturer: LITEON Technology
>[    3.225785]  sdc: sdc1 sdc2 sdc4
>[    3.226173] sd 2:0:0:0: [sdc] Attached SCSI disk
>[    3.352046] usb 1-10: new low-speed USB device number 4 using xhci_hcd
>[    3.608457] usb 1-10: New USB device found, idVendor=046d, idProduct=c018
>[    3.608687] usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    3.608966] usb 1-10: Product: USB Optical Mouse
>[    3.609160] usb 1-10: Manufacturer: Logitech
>[    3.696384] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[    3.700485] ata4.00: ATA-10: WDC WD2003FZEX-00SRLA0, 01.01A01, max UDMA/133
>[    3.700704] ata4.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
>[    3.707625] ata4.00: configured for UDMA/133
>[    3.707948] scsi 3:0:0:0: Direct-Access     ATA      WDC WD2003FZEX-0 1A01 PQ: 0 ANSI: 5
>[    3.708428] sd 3:0:0:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
>[    3.708718] sd 3:0:0:0: [sdd] 4096-byte physical blocks
>[    3.708915] sd 3:0:0:0: [sdd] Write Protect is off
>[    3.709103] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
>[    3.709111] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    3.714178]  sdd: sdd1 sdd2 sdd4
>[    3.714546] sd 3:0:0:0: [sdd] Attached SCSI disk
>[    3.740066] usb 1-13: new full-speed USB device number 5 using xhci_hcd
>[    4.022445] ata5: SATA link down (SStatus 0 SControl 330)
>[    4.080705] usb 1-13: New USB device found, idVendor=04d8, idProduct=f5fe
>[    4.080942] usb 1-13: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    4.081221] usb 1-13: Product: TrueRNG
>[    4.081404] usb 1-13: Manufacturer: ubld.it
>[    4.500379] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[    4.503436] ata6.00: ATAPI: PLEXTOR DVDR   PX-891SA, 1.04, max UDMA/100
>[    4.504711] ata6.00: configured for UDMA/100
>[    4.506993] scsi 5:0:0:0: CD-ROM            PLEXTOR  DVDR   PX-891SA  1.04 PQ: 0 ANSI: 5
>[    5.576399] ata7: failed to resume link (SControl 0)
>[    5.576625] ata7: SATA link down (SStatus 0 SControl 0)
>[    5.892240] ata8: SATA link down (SStatus 0 SControl 330)
>[    6.068909] Freeing unused kernel memory: 944K
>[    6.069100] Write protecting the kernel read-only data: 16384k
>[    6.070634] Freeing unused kernel memory: 2020K
>[    6.073158] Freeing unused kernel memory: 1796K
>[    6.130111] systemd[1]: File /usr/lib/systemd/system/systemd-journald.service:35 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
>[    6.130554] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
>[    6.133947] random: systemd: uninitialized urandom read (16 bytes read)
>[    6.134837] random: systemd: uninitialized urandom read (16 bytes read)
>[    6.135705] random: systemd: uninitialized urandom read (16 bytes read)
>[    6.148103] i2c /dev entries driver
>[    6.365667] usbcore: registered new interface driver usbhid
>[    6.365877] usbhid: USB HID core driver
>[    6.366646] input: LITEON Technology USB Multimedia Keyboard as /devices/pci0000:00/0000:00:01.2/0000:01:00.0/usb1/1-9/1-9:1.0/0003:046D:C312.0001/input/input1
>[    6.404859] sr 5:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>[    6.405028] cdrom: Uniform CD-ROM driver Revision: 3.20
>[    6.405255] sr 5:0:0:0: Attached scsi CD-ROM sr0
>[    6.424047] hid-generic 0003:046D:C312.0001: input: USB HID v1.10 Keyboard [LITEON Technology USB Multimedia Keyboard] on usb-0000:01:00.0-9/input0
>[    6.424377] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:01.2/0000:01:00.0/usb1/1-10/1-10:1.0/0003:046D:C018.0002/input/input2
>[    6.424612] hid-generic 0003:046D:C018.0002: input: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:01:00.0-10/input0
>[    6.457517] random: fast init done
>[    6.507566] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
>[    6.572259] md/raid1:md0: active with 4 out of 4 mirrors
>[    6.572472] md0: detected capacity change from 0 to 536805376
>[    6.578345] md: kicking non-fresh sdb2 from array!
>[    6.596847] md/raid10:md1: active with 3 out of 4 devices
>[    6.597081] md1: detected capacity change from 0 to 3997621551104
>[    7.360976] random: crng init done
>[    7.361183] random: 7 urandom warning(s) missed due to ratelimiting
>[    9.460663] igb 0000:06:00.0 eth0: igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
>[    9.461366] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>[   14.480203] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
>[   15.185335] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
>[   17.249651] systemd[1]: File /usr/lib/systemd/system/systemd-journald.service:35 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
>[   17.250091] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
>[   18.061811] EXT4-fs (dm-2): re-mounted. Opts: (null)
>[   18.147050] EXT4-fs (dm-1): re-mounted. Opts: (null)
>[   18.208922] RPC: Registered named UNIX socket transport module.
>[   18.209133] RPC: Registered udp transport module.
>[   18.209317] RPC: Registered tcp transport module.
>[   18.209502] RPC: Registered tcp NFSv4.1 backchannel transport module.
>[   18.379668] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>[   19.126716] acpi_cpufreq: overriding BIOS provided _PSD data
>[   19.141085] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
>[   19.141380] ACPI: Power Button [PWRB]
>[   19.142603] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
>[   19.142930] ACPI: Power Button [PWRF]
>[   19.159688] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
>[   19.159985] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
>[   19.381697] [drm] amdgpu kernel modesetting enabled.
>[   19.383787] [drm] initializing kernel modesetting (RAVEN 0x1002:0x15DD 0x1458:0xD000 0xC6).
>[   19.384111] [drm] register mmio base: 0xFE400000
>[   19.384300] [drm] register mmio size: 524288
>[   19.412212] kvm: disabled by bios
>[   19.469942] EDAC amd64: Node 0: DRAM ECC disabled.
>[   19.470137] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
>                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
>                (Note that use of the override may cause unknown side effects.)
>[   19.512454] EDAC amd64: Node 0: DRAM ECC disabled.
>[   19.512676] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
>                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
>                (Note that use of the override may cause unknown side effects.)
>[   19.552634] EDAC amd64: Node 0: DRAM ECC disabled.
>[   19.552865] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
>                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
>                (Note that use of the override may cause unknown side effects.)
>[   19.595197] [drm] probing gen 2 caps for device 1022:15db = 700d03/e
>[   19.595419] [drm] probing mlw for device 1022:15db = 700d03
>[   19.595840] [drm] VCN decode is enabled in VM mode
>[   19.596073] [drm] VCN encode is enabled in VM mode
>[   19.600367] EDAC amd64: Node 0: DRAM ECC disabled.
>[   19.600557] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
>                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
>                (Note that use of the override may cause unknown side effects.)
>[   19.619768] [drm] BIOS signature incorrect 20 7
>[   19.619898] ATOM BIOS: 113-RAVEN-104
>[   19.620045] [drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit
>[   19.620206] amdgpu 0000:09:00.0: VRAM: 1024M 0x000000F400000000 - 0x000000F43FFFFFFF (1024M used)
>[   19.620361] amdgpu 0000:09:00.0: GTT: 1024M 0x000000F500000000 - 0x000000F53FFFFFFF
>[   19.620512] [drm] Detected VRAM RAM=1024M, BAR=256M
>[   19.620613] [drm] RAM width 128bits UNKNOWN
>[   19.620769] [TTM] Zone  kernel: Available graphics memory: 7704902 kiB
>[   19.620884] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
>[   19.620994] [TTM] Initializing pool allocator
>[   19.621094] [TTM] Initializing DMA pool allocator
>[   19.621206] [drm] amdgpu: 1024M of VRAM memory ready
>[   19.621309] [drm] amdgpu: 3072M of GTT memory ready.
>[   19.621415] [drm] GART: num cpu pages 262144, num gpu pages 262144
>[   19.621691] [drm] PCIE GART of 1024M enabled (table at 0x000000F400800000).
>[   19.644555] EDAC amd64: Node 0: DRAM ECC disabled.
>[   19.644670] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
>                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
>                (Note that use of the override may cause unknown side effects.)
>[   19.704723] cdc_acm 1-13:1.0: ttyACM0: USB ACM device
>[   19.706461] usbcore: registered new interface driver cdc_acm
>[   19.706678] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
>[   19.736442] [drm] use_doorbell being set to: [true]
>[   19.755150] [drm] Found VCN firmware Version: 1.73 Family ID: 18
>[   19.896922] Linux video capture interface: v2.00
>[   19.912810] [drm:construct [amdgpu]] *ERROR* construct: Invalid Connector ObjectID from Adapter Service for connector index:1! type 0 expected 3
>[   19.913011] [drm:construct [amdgpu]] *ERROR* construct: Invalid Connector ObjectID from Adapter Service for connector index:2! type 0 expected 3
>[   19.913210] [drm:construct [amdgpu]] *ERROR* construct: Invalid Connector ObjectID from Adapter Service for connector index:3! type 0 expected 3
>[   19.927157] [drm] Display Core initialized with v3.1.27!
>[   19.952151] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
>[   19.952244] [drm] Driver supports precise vblank timestamp query.
>[   19.975083] [drm] VCN decode and encode initialized successfully.
>[   19.990449] [drm] fb mappable at 0xE1000000
>[   19.990552] [drm] vram apper at 0xE0000000
>[   19.990646] [drm] size 33177600
>[   19.990733] [drm] fb depth is 24
>[   19.990821] [drm]    pitch is 15360
>[   19.990976] fbcon: amdgpudrmfb (fb0) is primary device
>[   20.049029] usbcore: registered new interface driver snd-usb-audio
>[   20.058189] uvcvideo: Found UVC 1.00 device HD Webcam C615 (046d:082c)
>[   20.081024] input: HD Webcam C615 as /devices/pci0000:00/0000:00:01.2/0000:01:00.0/usb1/1-4/1-4:1.2/input/input5
>[   20.081143] usbcore: registered new interface driver uvcvideo
>[   20.081144] USB Video Class driver (1.1.1)
>[   20.098237] Console: switching to colour frame buffer device 480x135
>[   20.133549] amdgpu 0000:09:00.0: fb0: amdgpudrmfb frame buffer device
>[   20.160117] amdgpu 0000:09:00.0: ring 0(gfx) uses VM inv eng 4 on hub 0
>[   20.160121] amdgpu 0000:09:00.0: ring 1(comp_1.0.0) uses VM inv eng 5 on hub 0
>[   20.160123] amdgpu 0000:09:00.0: ring 2(comp_1.1.0) uses VM inv eng 6 on hub 0
>[   20.160126] amdgpu 0000:09:00.0: ring 3(comp_1.2.0) uses VM inv eng 7 on hub 0
>[   20.160129] amdgpu 0000:09:00.0: ring 4(comp_1.3.0) uses VM inv eng 8 on hub 0
>[   20.160131] amdgpu 0000:09:00.0: ring 5(comp_1.0.1) uses VM inv eng 9 on hub 0
>[   20.160134] amdgpu 0000:09:00.0: ring 6(comp_1.1.1) uses VM inv eng 10 on hub 0
>[   20.160136] amdgpu 0000:09:00.0: ring 7(comp_1.2.1) uses VM inv eng 11 on hub 0
>[   20.160138] amdgpu 0000:09:00.0: ring 8(comp_1.3.1) uses VM inv eng 12 on hub 0
>[   20.160151] amdgpu 0000:09:00.0: ring 9(kiq_2.1.0) uses VM inv eng 13 on hub 0
>[   20.160154] amdgpu 0000:09:00.0: ring 10(sdma0) uses VM inv eng 4 on hub 1
>[   20.160156] amdgpu 0000:09:00.0: ring 11(vcn_dec) uses VM inv eng 5 on hub 1
>[   20.160171] amdgpu 0000:09:00.0: ring 12(vcn_enc0) uses VM inv eng 6 on hub 1
>[   20.160173] amdgpu 0000:09:00.0: ring 13(vcn_enc1) uses VM inv eng 7 on hub 1
>[   20.163608] [drm] Initialized amdgpu 3.23.0 20150101 for 0000:09:00.0 on minor 0
>[   20.248200] snd_hda_codec_generic hdaudioC0D0: ignore pin 0x7, too many assigned pins
>[   20.248284] snd_hda_codec_generic hdaudioC0D0: ignore pin 0x9, too many assigned pins
>[   20.248370] snd_hda_codec_generic hdaudioC0D0: ignore pin 0xb, too many assigned pins
>[   20.248442] snd_hda_codec_generic hdaudioC0D0: ignore pin 0xd, too many assigned pins
>[   20.248496] snd_hda_codec_generic hdaudioC0D0: autoconfig for Generic: line_outs=0 (0x0/0x0/0x0/0x0/0x0) type:line
>[   20.248582] snd_hda_codec_generic hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>[   20.248635] snd_hda_codec_generic hdaudioC0D0:    hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
>[   20.248684] snd_hda_codec_generic hdaudioC0D0:    mono: mono_out=0x0
>[   20.248726] snd_hda_codec_generic hdaudioC0D0:    dig-out=0x3/0x5
>[   20.248772] snd_hda_codec_generic hdaudioC0D0:    inputs:
>[   20.250071] input: HD-Audio Generic HDMI as /devices/pci0000:00/0000:00:08.1/0000:09:00.1/sound/card0/input6
>[   20.250246] input: HD-Audio Generic HDMI as /devices/pci0000:00/0000:00:08.1/0000:09:00.1/sound/card0/input7
>[   20.274400] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC1220: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
>[   20.274451] snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>[   20.274486] snd_hda_codec_realtek hdaudioC1D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
>[   20.274520] snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
>[   20.274553] snd_hda_codec_realtek hdaudioC1D0:    dig-out=0x1e/0x0
>[   20.274580] snd_hda_codec_realtek hdaudioC1D0:    inputs:
>[   20.274611] snd_hda_codec_realtek hdaudioC1D0:      Front Mic=0x19
>[   20.274638] snd_hda_codec_realtek hdaudioC1D0:      Rear Mic=0x18
>[   20.274664] snd_hda_codec_realtek hdaudioC1D0:      Line=0x1a
>[   20.294763] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:09:00.6/sound/card1/input8
>[   20.294856] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:09:00.6/sound/card1/input9
>[   20.294932] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:09:00.6/sound/card1/input10
>[   20.295005] input: HD-Audio Generic Line Out Front as /devices/pci0000:00/0000:00:08.1/0000:09:00.6/sound/card1/input11
>[   20.295084] input: HD-Audio Generic Line Out Surround as /devices/pci0000:00/0000:00:08.1/0000:09:00.6/sound/card1/input12
>[   20.295162] input: HD-Audio Generic Line Out CLFE as /devices/pci0000:00/0000:00:08.1/0000:09:00.6/sound/card1/input13
>[   20.295242] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:09:00.6/sound/card1/input14
>[   34.450427] sysrq: SysRq : Terminate All Tasks
>[   34.453261] systemd[1]: lvm2-monitor.service: Main process exited, code=killed, status=15/TERM
>[   34.453502] systemd[1]: lvm2-monitor.service: Failed with result 'signal'.
>[   34.453831] systemd[1]: Failed to start Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
>[   35.332103] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null)
>[   37.208309] EXT4-fs (dm-6): mounted filesystem with ordered data mode. Opts: (null)
>[   37.292659] EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts: (null)
>[   37.741698] EXT4-fs (dm-7): mounted filesystem with ordered data mode. Opts: (null)
>[   37.748516] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null)
>[   37.880401] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null)
>[   38.428755] Adding 1023996k swap on /dev/mapper/swapb.  Priority:-2 extents:1 across:1023996k 
>[   38.485328] Adding 1023996k swap on /dev/mapper/swapa.  Priority:-3 extents:1 across:1023996k 
>[   38.532166] Adding 1023996k swap on /dev/mapper/swapc.  Priority:-4 extents:1 across:1023996k 
>[   39.280183] Adding 1023996k swap on /dev/mapper/swapd.  Priority:-5 extents:1 across:1023996k 
>[   51.315447] EXT4-fs (dm-8): mounted filesystem with ordered data mode. Opts: (null)
>[   52.027904] pps pps0: new PPS source serial0
>[   52.027910] pps pps0: source "/dev/ttyS0" added
>[   52.121563] it87: loading out-of-tree module taints kernel.
>[   52.126736] it87: it87 driver version v1.0-41-ge4056da
>[   52.131758] it87: Found IT8686E chip at 0xa40, revision 2
>[   52.133954] it87: Beeping is supported
>[   52.136882] it87: Found IT8792E/IT8795E chip at 0xa60, revision 3
>[   52.138314] it87: Beeping is supported
>[   59.383979] NFSD: starting 90-second grace period (net f0000099)
>[   90.718117] fuse init (API version 7.26)
>[   99.527948] nemo-desktop[3598]: segfault at 3 ip 00007f8a0c862858 sp 00007ffe2c19e5f8 error 4 in libglib-2.0.so.0.5600.1[7f8a0c81a000+115000]
>[  194.718783] md/raid1:md0: Disk failure on sdb1, disabling device.
>               md/raid1:md0: Operation continuing on 3 devices.
>[ 5671.927134] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
>[ 5671.927142] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 29 pio 16392 in
>                        opcode=0x4a 4a 01 00 00 10 00 00 00 08 00res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>[ 5671.927144] ata6.00: status: { DRDY }
>[ 5671.927147] ata6: hard resetting link
>[ 5672.404024] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[ 5672.407318] ata6.00: configured for UDMA/100
>[ 5672.418466] ata6: EH complete
>[ 7187.434671] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
>[ 7187.434679] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 23 pio 16392 in
>                        opcode=0x4a 4a 01 00 00 10 00 00 00 08 00res 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
>[ 7187.434682] ata6.00: status: { DRDY }
>[ 7187.434685] ata6: hard resetting link
>[ 7187.910674] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[ 7187.913926] ata6.00: configured for UDMA/100
>[ 7187.924865] ata6: EH complete
>[31321.518107] amdgpu: [powerplay] pp_dpm_get_temperature was not implemented.
>[31321.518124] amdgpu: [powerplay] pp_dpm_get_temperature was not implemented.
>[44499.591077] usb 1-7: new full-speed USB device number 6 using xhci_hcd
>[44499.838258] usb 1-7: New USB device found, idVendor=10c4, idProduct=ea60
>[44499.838265] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[44499.838270] usb 1-7: Product: CP2102 USB to UART Bridge Controller
>[44499.838273] usb 1-7: Manufacturer: Silicon Labs
>[44499.838276] usb 1-7: SerialNumber: 0001
>[44500.079083] usbcore: registered new interface driver usbserial_generic
>[44500.079106] usbserial: USB Serial support registered for generic
>[44500.089597] usbcore: registered new interface driver cp210x
>[44500.089614] usbserial: USB Serial support registered for cp210x
>[44500.089651] cp210x 1-7:1.0: cp210x converter detected
>[44500.102316] usb 1-7: cp210x converter now attached to ttyUSB0
>[44548.020584] usb 1-7: USB disconnect, device number 6
>[44548.020700] cp210x ttyUSB0: cp210x converter now disconnected from ttyUSB0
>[44548.020724] cp210x 1-7:1.0: device disconnected
>[67425.870497] amdgpu 0000:09:00.0: [gfxhub] VMC page fault (src_id:0 ring:56 vmid:3 pas_id:0)
>[67425.870503] amdgpu 0000:09:00.0:   at page 0x000080011ca00000 from 27
>[67425.870505] amdgpu 0000:09:00.0: VM_L2_PROTECTION_FAULT_STATUS:0x003C0071
>[67425.870511] amdgpu 0000:09:00.0: [gfxhub] VMC page fault (src_id:0 ring:56 vmid:3 pas_id:0)
>[67425.870513] amdgpu 0000:09:00.0:   at page 0x000080011ca01000 from 27
>[67425.870515] amdgpu 0000:09:00.0: VM_L2_PROTECTION_FAULT_STATUS:0x00000000
>[67425.870520] amdgpu 0000:09:00.0: [gfxhub] VMC page fault (src_id:0 ring:56 vmid:3 pas_id:0)
>[67425.870522] amdgpu 0000:09:00.0:   at page 0x000080011ca04000 from 27
>[67425.870524] amdgpu 0000:09:00.0: VM_L2_PROTECTION_FAULT_STATUS:0x00000000
>[67425.870530] amdgpu 0000:09:00.0: [gfxhub] VMC page fault (src_id:0 ring:56 vmid:3 pas_id:0)
>[67425.870531] amdgpu 0000:09:00.0:   at page 0x000080011ca05000 from 27
>[67425.870532] amdgpu 0000:09:00.0: VM_L2_PROTECTION_FAULT_STATUS:0x00000000
>[67425.870538] amdgpu 0000:09:00.0: [gfxhub] VMC page fault (src_id:0 ring:56 vmid:3 pas_id:0)
>[67425.870540] amdgpu 0000:09:00.0:   at page 0x000080011ca02000 from 27
>[67425.870541] amdgpu 0000:09:00.0: VM_L2_PROTECTION_FAULT_STATUS:0x00000000
>[67425.870547] amdgpu 0000:09:00.0: [gfxhub] VMC page fault (src_id:0 ring:56 vmid:3 pas_id:0)
>[67425.870548] amdgpu 0000:09:00.0:   at page 0x000080011ca03000 from 27
>[67425.870550] amdgpu 0000:09:00.0: VM_L2_PROTECTION_FAULT_STATUS:0x00000000
>[67425.870555] amdgpu 0000:09:00.0: [gfxhub] VMC page fault (src_id:0 ring:56 vmid:3 pas_id:0)
>[67425.870557] amdgpu 0000:09:00.0:   at page 0x000080011ca06000 from 27
>[67425.870558] amdgpu 0000:09:00.0: VM_L2_PROTECTION_FAULT_STATUS:0x00000000
>[67425.870564] amdgpu 0000:09:00.0: [gfxhub] VMC page fault (src_id:0 ring:56 vmid:3 pas_id:0)
>[67425.870565] amdgpu 0000:09:00.0:   at page 0x000080011ca07000 from 27
>[67425.870567] amdgpu 0000:09:00.0: VM_L2_PROTECTION_FAULT_STATUS:0x00000000
>[67425.870572] amdgpu 0000:09:00.0: [gfxhub] VMC page fault (src_id:0 ring:56 vmid:3 pas_id:0)
>[67425.870574] amdgpu 0000:09:00.0:   at page 0x000080011ca08000 from 27
>[67425.870575] amdgpu 0000:09:00.0: VM_L2_PROTECTION_FAULT_STATUS:0x00000000
>[67425.870581] amdgpu 0000:09:00.0: [gfxhub] VMC page fault (src_id:0 ring:56 vmid:3 pas_id:0)
>[67425.870583] amdgpu 0000:09:00.0:   at page 0x000080011ca09000 from 27
>[67425.870585] amdgpu 0000:09:00.0: VM_L2_PROTECTION_FAULT_STATUS:0x00000000
>[67436.085320] [drm:amdgpu_job_timedout [amdgpu]] *ERROR* ring gfx timeout, last signaled seq=327845, last emitted seq=327847
>[67436.085327] [drm] IP block:psp is hung!
>[67436.085331] [drm] GPU recovery disabled.
>[67666.740759] INFO: task amdgpu_cs:0:3027 blocked for more than 120 seconds.
>[67666.740767]       Tainted: G           O     4.16.11 #9
>[67666.740770] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
>[67666.740774] amdgpu_cs:0     D    0  3027   3024 0x00000000
>[67666.740781] Call Trace:
>[67666.740792]  ? __schedule+0x1aa/0x6e0
>[67666.740797]  schedule+0x2d/0x90
>[67666.740802]  schedule_timeout+0x1e2/0x2d0
>[67666.740809]  ? preempt_count_add+0x63/0xa0
>[67666.740813]  ? _raw_spin_lock+0xe/0x30
>[67666.740820]  dma_fence_default_wait+0x204/0x230
>[67666.740825]  ? dma_fence_default_wait+0x230/0x230
>[67666.740858]  amdgpu_ctx_wait_prev_fence+0x40/0x80 [amdgpu]
>[67666.740887]  amdgpu_cs_ioctl+0x422/0x1980 [amdgpu]
>[67666.740916]  ? amdgpu_cs_find_mapping+0x100/0x100 [amdgpu]
>[67666.740921]  drm_ioctl_kernel+0x6b/0xd0
>[67666.740926]  drm_ioctl+0x1c4/0x3c0
>[67666.740951]  ? amdgpu_cs_find_mapping+0x100/0x100 [amdgpu]
>[67666.740956]  ? do_futex+0x2ab/0xaa0
>[67666.740960]  ? ___cache_free+0x40/0x1f0
>[67666.740965]  do_vfs_ioctl+0xb0/0x640
>[67666.740969]  ? SyS_futex+0x14d/0x19d
>[67666.740973]  SyS_ioctl+0x91/0xa0
>[67666.740977]  do_syscall_64+0x83/0x2f0
>[67666.740982]  entry_SYSCALL_64_after_hwframe+0x3d/0xa2
>[67666.740986] RIP: 0033:0x7f79a07d5dc7
>[67666.740989] RSP: 002b:00007f7996d2f978 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
>[67666.740993] RAX: ffffffffffffffda RBX: 00007f7996d2fa68 RCX: 00007f79a07d5dc7
>[67666.740996] RDX: 00007f7996d2f9e0 RSI: 00000000c0186444 RDI: 000000000000000e
>[67666.740999] RBP: 00007f7996d2f9e0 R08: 00007f7996d2fa90 R09: 0000000000000010
>[67666.741001] R10: 00007f7996d2fa90 R11: 0000000000000246 R12: 00000000c0186444
>[67666.741004] R13: 000000000000000e R14: 000000000000000b R15: 0000000000000000
>[67666.741047] INFO: task kworker/u16:2:31826 blocked for more than 120 seconds.
>[67666.741050]       Tainted: G           O     4.16.11 #9
>[67666.741051] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
>[67666.741053] kworker/u16:2   D    0 31826      2 0x80000000
>[67666.741062] Workqueue: events_unbound commit_work
>[67666.741065] Call Trace:
>[67666.741069]  ? __schedule+0x1aa/0x6e0
>[67666.741072]  schedule+0x2d/0x90
>[67666.741076]  schedule_timeout+0x1e2/0x2d0
>[67666.741081]  dma_fence_default_wait+0x204/0x230
>[67666.741084]  ? dma_fence_default_wait+0x230/0x230
>[67666.741088]  reservation_object_wait_timeout_rcu+0x1dc/0x360
>[67666.741129]  amdgpu_dm_do_flip+0x108/0x370 [amdgpu]
>[67666.741171]  amdgpu_dm_atomic_commit_tail+0xac7/0xdb0 [amdgpu]
>[67666.741176]  ? wait_for_common+0x125/0x1c0
>[67666.741180]  commit_tail+0x38/0x70
>[67666.741184]  process_one_work+0x1a1/0x2f0
>[67666.741188]  worker_thread+0x26/0x3f0
>[67666.741191]  ? process_one_work+0x2f0/0x2f0
>[67666.741195]  kthread+0x109/0x120
>[67666.741198]  ? kthread_create_on_node+0x60/0x60
>[67666.741202]  ret_from_fork+0x22/0x40

Actions: View

Attachments on bug 106666: 139789 | 139790 | 139863 | 139864 | 139982 | 140158 | 140159

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.