Attachment 141979 Details for Bug 108103 – dmesg

dmesg

i915-dmesg.txt (text/plain), 74.26 KB, created by Felix von Leitner on 2018-10-10 15:06:33 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Felix von Leitner

Created: 2018-10-10 15:06:33 UTC

Size: 74.26 KB

patch

obsolete

>microcode: microcode updated early to revision 0x28, date = 2018-05-22
>Linux version 4.19.0-rc5-1-default (leitner@acidblob) (gcc version 8.2.1 20180831 [gcc-8-branch revision 264010] (SUSE Linux)) #6 SMP PREEMPT Sun Sep 30 19:40:07 CEST 2018
>Command line: BOOT_IMAGE=/boot/bzImage root=PARTUUID=4e87d3c0-f082-4948-8aca-0319ae0ac13d rootwait drm.debug=0xf
>KERNEL supported cpus:
>  Intel GenuineIntel
>x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
>x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
>x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
>x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
>x86/fpu: xstate_offset[3]:  576, xstate_sizes[3]:   64
>x86/fpu: xstate_offset[4]:  640, xstate_sizes[4]:   64
>x86/fpu: Enabled xstate features 0x1b, context size is 704 bytes, using 'compacted' format.
>BIOS-provided physical RAM map:
>BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
>BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
>BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
>BIOS-e820: [mem 0x000000000009e000-0x00000000000fffff] reserved
>BIOS-e820: [mem 0x0000000000100000-0x000000000fffffff] usable
>BIOS-e820: [mem 0x0000000010000000-0x0000000012150fff] reserved
>BIOS-e820: [mem 0x0000000012151000-0x0000000074553fff] usable
>BIOS-e820: [mem 0x0000000074554000-0x0000000074a53fff] reserved
>BIOS-e820: [mem 0x0000000074a54000-0x0000000074d53fff] type 20
>BIOS-e820: [mem 0x0000000074d54000-0x0000000077753fff] reserved
>BIOS-e820: [mem 0x0000000077754000-0x00000000777b3fff] ACPI NVS
>BIOS-e820: [mem 0x00000000777b4000-0x00000000777f3fff] ACPI data
>BIOS-e820: [mem 0x00000000777f4000-0x0000000078cabfff] usable
>BIOS-e820: [mem 0x0000000078cac000-0x00000000795abfff] reserved
>BIOS-e820: [mem 0x00000000795ac000-0x0000000079bfffff] usable
>BIOS-e820: [mem 0x0000000079c00000-0x000000007fffffff] reserved
>BIOS-e820: [mem 0x00000000d3709000-0x00000000d3709fff] reserved
>BIOS-e820: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved
>BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
>BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
>BIOS-e820: [mem 0x0000000100000000-0x000000027fffffff] usable
>NX (Execute Disable) protection: active
>efi: EFI v2.60 by INSYDE Corp.
>efi:  ACPI=0x777f3000  ACPI 2.0=0x777f3014  ESRT=0x7481d018  SMBIOS=0x7480b000  SMBIOS 3.0=0x74809000 
>SMBIOS 3.0.1 present.
>DMI: Acer Swift SF114-32/Sapporo_GL, BIOS V1.03 05/02/2018
>tsc: Detected 1094.400 MHz processor
>e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
>e820: remove [mem 0x000a0000-0x000fffff] usable
>last_pfn = 0x280000 max_arch_pfn = 0x400000000
>MTRR default type: uncachable
>MTRR fixed ranges enabled:
>  00000-9FFFF write-back
>  A0000-BFFFF uncachable
>  C0000-FFFFF write-protect
>MTRR variable ranges enabled:
>  0 base 00FF800000 mask 7FFF800000 write-combining
>  1 base 0000000000 mask 7F80000000 write-back
>  2 base 007A000000 mask 7FFE000000 uncachable
>  3 base 007C000000 mask 7FFC000000 uncachable
>  4 base 0100000000 mask 7F00000000 write-back
>  5 base 0200000000 mask 7F80000000 write-back
>  6 base 0090000000 mask 7FF0000000 write-combining
>  7 disabled
>  8 disabled
>  9 disabled
>x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
>last_pfn = 0x79c00 max_arch_pfn = 0x400000000
>esrt: Reserving ESRT space from 0x000000007481d018 to 0x000000007481d050.
>Base memory trampoline at [(____ptrval____)] 98000 size 24576
>Using GB pages for direct mapping
>BRK [0x13fe01000, 0x13fe01fff] PGTABLE
>BRK [0x13fe02000, 0x13fe02fff] PGTABLE
>BRK [0x13fe03000, 0x13fe03fff] PGTABLE
>BRK [0x13fe04000, 0x13fe04fff] PGTABLE
>BRK [0x13fe05000, 0x13fe05fff] PGTABLE
>BRK [0x13fe06000, 0x13fe06fff] PGTABLE
>BRK [0x13fe07000, 0x13fe07fff] PGTABLE
>BRK [0x13fe08000, 0x13fe08fff] PGTABLE
>BRK [0x13fe09000, 0x13fe09fff] PGTABLE
>BRK [0x13fe0a000, 0x13fe0afff] PGTABLE
>Secure boot could not be determined
>RAMDISK: [mem 0x37af8000-0x37d73fff]
>ACPI: Early table checksum verification disabled
>ACPI: RSDP 0x00000000777F3014 000024 (v02 ACRSYS)
>ACPI: XSDT 0x00000000777D0188 00010C (v01 ACRSYS ACRPRDCT 00000003      01000013)
>ACPI: FACP 0x00000000777E6000 000114 (v06 ACRSYS ACRPRDCT 00000003 1025 00040000)
>ACPI: DSDT 0x00000000777D4000 009EAC (v02 ACRSYS ACRPRDCT 00000003 1025 00040000)
>ACPI: FACS 0x00000000777AB000 000040
>ACPI: FACS 0x00000000777AB000 000040
>ACPI: SSDT 0x00000000777EF000 002615 (v02 ACRSYS ACRPRDCT 00000000 1025 00040000)
>ACPI: SSDT 0x00000000777ED000 000554 (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
>ACPI: MSDM 0x00000000777EB000 000055 (v03 ACRSYS ACRPRDCT 00000001 1025 00040000)
>ACPI: DBG2 0x00000000777E9000 000072 (v00 ACRSYS ACRPRDCT 00000003 1025 00040000)
>ACPI: LPIT 0x00000000777E4000 00005C (v01 ACRSYS ACRPRDCT 00000003 1025 00040000)
>ACPI: MCFG 0x00000000777E2000 00003C (v01 ACRSYS ACRPRDCT 00000003 1025 00040000)
>ACPI: PRAM 0x00000000777E0000 000030 (v01 ACRSYS ACRPRDCT 00000003 1025 00040000)
>ACPI: SSDT 0x00000000777D1000 002483 (v02 ACRSYS ACRPRDCT 00000003 1025 00040000)
>ACPI: SSDT 0x00000000777C9000 00045A (v02 ACRSYS ACRPRDCT 00003000 1025 00040000)
>ACPI: SSDT 0x00000000777C7000 00032D (v02 ACRSYS ACRPRDCT 00003000 1025 00040000)
>ACPI: SSDT 0x00000000777C3000 0027EC (v02 ACRSYS ACRPRDCT 00003000 1025 00040000)
>ACPI: BGRT 0x00000000777C2000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
>ACPI: WDAT 0x00000000777C1000 000104 (v01 ACRSYS ACRPRDCT 00000000 1025 00040000)
>ACPI: UEFI 0x00000000777F2000 000236 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
>ACPI: TPM2 0x00000000777EC000 000034 (v04 ACRSYS ACRPRDCT 00000002 1025 00040000)
>ACPI: DBGP 0x00000000777E8000 000034 (v01 ACRSYS ACRPRDCT 00000003 1025 00040000)
>ACPI: APIC 0x00000000777E3000 000084 (v03 ACRSYS ACRPRDCT 00000003 1025 00040000)
>ACPI: WSMT 0x00000000777DE000 000028 (v01 ACRSYS ACRPRDCT 00000003 1025 00040000)
>ACPI: SSDT 0x00000000777C8000 00072B (v02 ACRSYS ACRPRDCT 00003000 1025 00040000)
>ACPI: FPDT 0x00000000777DF000 000034 (v01 ACRSYS ACRPRDCT 00000002 1025 00040000)
>ACPI: BDAT 0x00000000777EA000 000030 (v02 ACRSYS ACRPRDCT 00000000 1025 00040000)
>ACPI: NPKT 0x00000000777E1000 000065 (v01 ACRSYS ACRPRDCT 00000003 1025 00040000)
>ACPI: SSDT 0x00000000777C6000 00017C (v02 ACRSYS ACRPRDCT 00003000 1025 00040000)
>ACPI: UEFI 0x00000000777EE000 000042 (v01 ACRSYS ACRPRDCT 00000002 1025 00040000)
>ACPI: SSDT 0x00000000777CA000 0053FB (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
>ACPI: HPET 0x00000000777E5000 000038 (v01 ACRSYS ACRPRDCT 00000003 1025 00040000)
>ACPI: DMAR 0x00000000777E7000 0000A8 (v01 ACRSYS ACRPRDCT 00000003 1025 00040000)
>ACPI: NHLT 0x00000000777C0000 00002D (v00 ACRSYS ACRPRDCT 00000002 1025 00040000)
>ACPI: Local APIC address 0xfee00000
>Zone ranges:
>  DMA      [mem 0x0000000000001000-0x0000000000ffffff]
>  DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
>  Normal   [mem 0x0000000100000000-0x000000027fffffff]
>Movable zone start for each node
>Early memory node ranges
>  node   0: [mem 0x0000000000001000-0x0000000000057fff]
>  node   0: [mem 0x0000000000059000-0x000000000009dfff]
>  node   0: [mem 0x0000000000100000-0x000000000fffffff]
>  node   0: [mem 0x0000000012151000-0x0000000074553fff]
>  node   0: [mem 0x00000000777f4000-0x0000000078cabfff]
>  node   0: [mem 0x00000000795ac000-0x0000000079bfffff]
>  node   0: [mem 0x0000000100000000-0x000000027fffffff]
>Reserved but unavailable: 49493 pages
>Initmem setup node 0 [mem 0x0000000000001000-0x000000027fffffff]
>On node 0 totalpages: 2047659
>  DMA zone: 64 pages used for memmap
>  DMA zone: 22 pages reserved
>  DMA zone: 3996 pages, LIFO batch:0
>  DMA32 zone: 7357 pages used for memmap
>  DMA32 zone: 470799 pages, LIFO batch:63
>  Normal zone: 24576 pages used for memmap
>  Normal zone: 1572864 pages, LIFO batch:63
>Reserving Intel graphics memory at [mem 0x7c000000-0x7fffffff]
>ACPI: PM-Timer IO Port: 0x408
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
>IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-119
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ9 used by override.
>Using ACPI (MADT) for SMP configuration information
>ACPI: HPET id: 0x8086a701 base: 0xfed00000
>smpboot: Allowing 4 CPUs, 0 hotplug CPUs
>[mem 0x80000000-0xd3708fff] available for PCI devices
>clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
>random: get_random_bytes called from start_kernel+0x82/0x491 with crng_init=0
>setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
>percpu: Embedded 44 pages/cpu @(____ptrval____) s141144 r8192 d30888 u524288
>pcpu-alloc: s141144 r8192 d30888 u524288 alloc=1*2097152
>pcpu-alloc: [0] 0 1 2 3 
>Built 1 zonelists, mobility grouping on.  Total pages: 2015640
>Kernel command line: BOOT_IMAGE=/boot/bzImage root=PARTUUID=4e87d3c0-f082-4948-8aca-0319ae0ac13d rootwait drm.debug=0xf
>Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
>Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
>Memory: 1899684K/8190636K available (12312K kernel code, 1567K rwdata, 6824K rodata, 1516K init, 1844K bss, 305868K reserved, 0K cma-reserved)
>SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
>Kernel/User page tables isolation: enabled
>ftrace: allocating 43052 entries in 169 pages
>rcu: Preemptible hierarchical RCU implementation.
>rcu: 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
>	Tasks RCU enabled.
>rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
>NR_IRQS: 4352, nr_irqs: 1024, preallocated irqs: 16
>Console: colour dummy device 80x25
>console [tty0] enabled
>ACPI: Core revision 20180810
>clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 99544814920 ns
>hpet clockevent registered
>APIC: Switch to symmetric I/O mode setup
>DMAR: Host address width 39
>DMAR: DRHD base: 0x000000fed64000 flags: 0x0
>DMAR: dmar0: reg_base_addr fed64000 ver 1:0 cap 1c0000c40660462 ecap 9e2ff0505e
>DMAR: DRHD base: 0x000000fed65000 flags: 0x1
>DMAR: dmar1: reg_base_addr fed65000 ver 1:0 cap d2008c40660462 ecap f050da
>DMAR: RMRR base: 0x00000077726000 end: 0x00000077745fff
>DMAR: RMRR base: 0x0000007b800000 end: 0x0000007fffffff
>DMAR-IR: IOAPIC id 1 under DRHD base  0xfed65000 IOMMU 1
>DMAR-IR: HPET id 0 under DRHD base 0xfed65000
>DMAR-IR: Enabled IRQ remapping in xapic mode
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0xfc66f4fc7c, max_idle_ns: 440795224246 ns
>Calibrating delay loop (skipped), value calculated using timer frequency.. 2188.80 BogoMIPS (lpj=4377600)
>pid_max: default: 32768 minimum: 301
>Security Framework initialized
>Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
>Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
>x86/cpu: Activated the Intel User Mode Instruction Prevention (UMIP) CPU feature
>mce: CPU supports 7 MCE banks
>CPU0: Thermal monitoring enabled (TM1)
>process: using mwait in idle threads
>Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
>Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
>Spectre V2 : Mitigation: Enhanced IBRS
>Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
>Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
>Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
>Freeing SMP alternatives memory: 24K
>TSC deadline timer enabled
>smpboot: CPU0: Intel(R) Pentium(R) Silver N5000 CPU @ 1.10GHz (family: 0x6, model: 0x7a, stepping: 0x1)
>Performance Events: PEBS fmt3+, Goldmont plus events, 32-deep LBR, full-width counters, Intel PMU driver.
>... version:                4
>... bit width:              48
>... generic registers:      4
>... value mask:             0000ffffffffffff
>... max period:             00007fffffffffff
>... fixed-purpose events:   3
>... event mask:             000000070000000f
>rcu: Hierarchical SRCU implementation.
>NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
>smp: Bringing up secondary CPUs ...
>x86: Booting SMP configuration:
>.... node  #0, CPUs:      #1
>x86/cpu: Activated the Intel User Mode Instruction Prevention (UMIP) CPU feature
> #2
>x86/cpu: Activated the Intel User Mode Instruction Prevention (UMIP) CPU feature
> #3
>x86/cpu: Activated the Intel User Mode Instruction Prevention (UMIP) CPU feature
>smp: Brought up 1 node, 4 CPUs
>smpboot: Max logical packages: 1
>smpboot: Total of 4 processors activated (8755.20 BogoMIPS)
>node 0 initialised, 1496271 pages in 120ms
>devtmpfs: initialized
>PM: Registering ACPI NVS region [mem 0x77754000-0x777b3fff] (393216 bytes)
>clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
>futex hash table entries: 1024 (order: 4, 65536 bytes)
>xor: measuring software checksum speed
>   prefetch64-sse:  5947.000 MB/sec
>   generic_sse:  5062.000 MB/sec
>xor: using function: prefetch64-sse (5947.000 MB/sec)
>pinctrl core: initialized pinctrl subsystem
>NET: Registered protocol family 16
>audit: initializing netlink subsys (disabled)
>audit: type=2000 audit(1538475211.448:1): state=initialized audit_enabled=0 res=1
>cpuidle: using governor ladder
>cpuidle: using governor menu
>ACPI: bus type PCI registered
>PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
>PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820
>PCI: Using configuration type 1 for base access
>HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
>HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
>cryptd: max_cpu_qlen set to 1000
>raid6: sse2x1   gen()  2644 MB/s
>raid6: sse2x1   xor()  1700 MB/s
>raid6: sse2x2   gen()  3112 MB/s
>raid6: sse2x2   xor()  2000 MB/s
>raid6: sse2x4   gen()  3560 MB/s
>raid6: sse2x4   xor()  1856 MB/s
>raid6: using algorithm sse2x4 gen() 3560 MB/s
>raid6: .... xor() 1856 MB/s, rmw enabled
>raid6: using ssse3x2 recovery algorithm
>ACPI: Added _OSI(Module Device)
>ACPI: Added _OSI(Processor Device)
>ACPI: Added _OSI(3.0 _SCP Extensions)
>ACPI: Added _OSI(Processor Aggregator Device)
>ACPI: Added _OSI(Linux-Dell-Video)
>ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
>ACPI: 10 ACPI AML tables successfully acquired and loaded
>ACPI: Dynamic OEM Table Load:
>ACPI: SSDT 0xFFFF9EB2F7B73000 000102 (v02 PmRef  Cpu0Cst  00003001 INTL 20130117)
>ACPI: Dynamic OEM Table Load:
>ACPI: SSDT 0xFFFF9EB2F7B72400 00015F (v02 PmRef  ApIst    00003000 INTL 20130117)
>ACPI: Dynamic OEM Table Load:
>ACPI: SSDT 0xFFFF9EB2F7A63480 00008D (v02 PmRef  ApCst    00003000 INTL 20130117)
>ACPI: EC: EC started
>ACPI: EC: interrupt blocked
>ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
>ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x25, EC_CMD/EC_SC=0x66, EC_DATA=0x62
>ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S5)
>ACPI: Using IOAPIC for interrupt routing
>PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>ACPI: Enabled 10 GPEs in block 00 to 7F
>ACPI: Power Resource [DRST] (on)
>ACPI: Power Resource [DRST] (on)
>ACPI: Power Resource [DRST] (on)
>ACPI: Power Resource [DRST] (on)
>ACPI: Power Resource [DRST] (on)
>ACPI: Power Resource [DRST] (on)
>ACPI: Power Resource [WRST] (on)
>ACPI: Power Resource [FN00] (on)
>ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
>acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
>acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability LTR]
>acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
>PCI host bridge to bus 0000:00
>pci_bus 0000:00: root bus resource [io  0x0070-0x0077]
>pci_bus 0000:00: root bus resource [io  0x0000-0x006f window]
>pci_bus 0000:00: root bus resource [io  0x0078-0x0cf7 window]
>pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
>pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
>pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
>pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window]
>pci_bus 0000:00: root bus resource [mem 0x7c000001-0x7fffffff window]
>pci_bus 0000:00: root bus resource [mem 0x80000000-0xbfffffff window]
>pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff window]
>pci_bus 0000:00: root bus resource [mem 0xfea00000-0xfeafffff window]
>pci_bus 0000:00: root bus resource [mem 0xfed00000-0xfed003ff window]
>pci_bus 0000:00: root bus resource [mem 0xfed01000-0xfed01fff window]
>pci_bus 0000:00: root bus resource [mem 0xfed03000-0xfed03fff window]
>pci_bus 0000:00: root bus resource [mem 0xfed06000-0xfed06fff window]
>pci_bus 0000:00: root bus resource [mem 0xfed08000-0xfed09fff window]
>pci_bus 0000:00: root bus resource [mem 0xfed80000-0xfedbffff window]
>pci_bus 0000:00: root bus resource [mem 0xfed1c000-0xfed1cfff window]
>pci_bus 0000:00: root bus resource [mem 0xfee00000-0xfeefffff window]
>pci_bus 0000:00: root bus resource [bus 00-ff]
>pci 0000:00:00.0: [8086:31f0] type 00 class 0x060000
>pci 0000:00:00.1: [8086:318c] type 00 class 0x118000
>pci 0000:00:00.1: reg 0x10: [mem 0x80000000-0x80007fff 64bit]
>pci 0000:00:02.0: [8086:3184] type 00 class 0x030000
>pci 0000:00:02.0: reg 0x10: [mem 0xa0000000-0xa0ffffff 64bit]
>pci 0000:00:02.0: reg 0x18: [mem 0x90000000-0x9fffffff 64bit pref]
>pci 0000:00:02.0: reg 0x20: [io  0x1000-0x103f]
>pci 0000:00:0c.0: [8086:31dc] type 00 class 0x028000
>pci 0000:00:0c.0: reg 0x10: [mem 0xa1110000-0xa1113fff 64bit]
>pci 0000:00:0c.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:0e.0: [8086:3198] type 00 class 0x040380
>pci 0000:00:0e.0: reg 0x10: [mem 0xa1114000-0xa1117fff 64bit]
>pci 0000:00:0e.0: reg 0x20: [mem 0xa1000000-0xa10fffff 64bit]
>pci 0000:00:0e.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:0f.0: [8086:319a] type 00 class 0x078000
>pci 0000:00:0f.0: reg 0x10: [mem 0xa111a000-0xa111afff 64bit]
>pci 0000:00:0f.0: PME# supported from D3hot
>pci 0000:00:12.0: [8086:31e3] type 00 class 0x010601
>pci 0000:00:12.0: reg 0x10: [mem 0xa1118000-0xa1119fff]
>pci 0000:00:12.0: reg 0x14: [mem 0xa1121000-0xa11210ff]
>pci 0000:00:12.0: reg 0x18: [io  0x1080-0x1087]
>pci 0000:00:12.0: reg 0x1c: [io  0x1088-0x108b]
>pci 0000:00:12.0: reg 0x20: [io  0x1060-0x107f]
>pci 0000:00:12.0: reg 0x24: [mem 0xa111f000-0xa111f7ff]
>pci 0000:00:12.0: PME# supported from D3hot
>pci 0000:00:13.0: [8086:31d8] type 01 class 0x060400
>pci 0000:00:13.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:15.0: [8086:31a8] type 00 class 0x0c0330
>pci 0000:00:15.0: reg 0x10: [mem 0xa1100000-0xa110ffff 64bit]
>pci 0000:00:15.0: PME# supported from D3hot D3cold
>pci 0000:00:17.0: [8086:31b4] type 00 class 0x118000
>pci 0000:00:17.0: reg 0x10: [mem 0xa111b000-0xa111bfff 64bit]
>pci 0000:00:17.0: reg 0x18: [mem 0xa111c000-0xa111cfff 64bit]
>pci 0000:00:1c.0: [8086:31cc] type 00 class 0x080501
>pci 0000:00:1c.0: reg 0x10: [mem 0xa111d000-0xa111dfff 64bit]
>pci 0000:00:1c.0: reg 0x18: [mem 0xa111e000-0xa111efff 64bit]
>pci 0000:00:1f.0: [8086:31e8] type 00 class 0x060100
>pci 0000:00:1f.1: [8086:31d4] type 00 class 0x0c0500
>pci 0000:00:1f.1: reg 0x10: [mem 0xa1120000-0xa11200ff 64bit]
>pci 0000:00:1f.1: reg 0x20: [io  0x1040-0x105f]
>pci 0000:00:13.0: PCI bridge to [bus 01]
>pci_bus 0000:00: on NUMA node 0
>ACPI: PCI Interrupt Link [LNKA] (IRQs *3 4 5 6 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 6 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 *6 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *7
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *9
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
>ACPI: EC: interrupt unblocked
>ACPI: EC: event unblocked
>ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x25, EC_CMD/EC_SC=0x66, EC_DATA=0x62
>ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
>SCSI subsystem initialized
>libata version 3.00 loaded.
>ACPI: bus type USB registered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>Registered efivars operations
>Advanced Linux Sound Architecture Driver Initialized.
>PCI: Using ACPI for IRQ routing
>PCI: pci_cache_line_size set to 64 bytes
>e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
>e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
>e820: reserve RAM buffer [mem 0x74554000-0x77ffffff]
>e820: reserve RAM buffer [mem 0x78cac000-0x7bffffff]
>e820: reserve RAM buffer [mem 0x79c00000-0x7bffffff]
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
>hpet0: 8 comparators, 64-bit 19.200000 MHz counter
>clocksource: Switched to clocksource tsc-early
>pnp: PnP ACPI init
>system 00:00: [io  0x0680-0x069f] has been reserved
>system 00:00: [io  0x0400-0x047f] has been reserved
>system 00:00: [io  0x0500-0x05fe] has been reserved
>system 00:00: [mem 0xfe800000-0xfe80ffff] has been reserved
>system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
>system 00:02: [mem 0xe0000000-0xefffffff] could not be reserved
>system 00:02: [mem 0xfea00000-0xfeafffff] has been reserved
>system 00:02: [mem 0xfed01000-0xfed01fff] has been reserved
>system 00:02: [mem 0xfed03000-0xfed03fff] has been reserved
>system 00:02: [mem 0xfed06000-0xfed06fff] has been reserved
>system 00:02: [mem 0xfed08000-0xfed09fff] has been reserved
>system 00:02: [mem 0xfed80000-0xfedbffff] has been reserved
>system 00:02: [mem 0xfed1c000-0xfed1cfff] has been reserved
>system 00:02: [mem 0xfee00000-0xfeefffff] has been reserved
>system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
>pnp: PnP ACPI: found 4 devices
>clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
>pci 0000:00:13.0: PCI bridge to [bus 01]
>pci_bus 0000:00: resource 4 [io  0x0070-0x0077]
>pci_bus 0000:00: resource 5 [io  0x0000-0x006f window]
>pci_bus 0000:00: resource 6 [io  0x0078-0x0cf7 window]
>pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
>pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
>pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
>pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window]
>pci_bus 0000:00: resource 11 [mem 0x7c000001-0x7fffffff window]
>pci_bus 0000:00: resource 12 [mem 0x80000000-0xbfffffff window]
>pci_bus 0000:00: resource 13 [mem 0xe0000000-0xefffffff window]
>pci_bus 0000:00: resource 14 [mem 0xfea00000-0xfeafffff window]
>pci_bus 0000:00: resource 15 [mem 0xfed00000-0xfed003ff window]
>pci_bus 0000:00: resource 16 [mem 0xfed01000-0xfed01fff window]
>pci_bus 0000:00: resource 17 [mem 0xfed03000-0xfed03fff window]
>pci_bus 0000:00: resource 18 [mem 0xfed06000-0xfed06fff window]
>pci_bus 0000:00: resource 19 [mem 0xfed08000-0xfed09fff window]
>pci_bus 0000:00: resource 20 [mem 0xfed80000-0xfedbffff window]
>pci_bus 0000:00: resource 21 [mem 0xfed1c000-0xfed1cfff window]
>pci_bus 0000:00: resource 22 [mem 0xfee00000-0xfeefffff window]
>NET: Registered protocol family 2
>tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes)
>TCP established hash table entries: 65536 (order: 7, 524288 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 65536 bind 65536)
>UDP hash table entries: 4096 (order: 5, 131072 bytes)
>UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
>NET: Registered protocol family 1
>Trying to unpack rootfs image as initramfs...
>Freeing initrd memory: 2544K
>DMAR: No ATSR found
>DMAR: dmar0: Using Queued invalidation
>DMAR: dmar1: Using Queued invalidation
>DMAR: Setting RMRR:
>DMAR: Setting identity map for device 0000:00:02.0 [0x7b800000 - 0x7fffffff]
>DMAR: Setting identity map for device 0000:00:15.0 [0x77726000 - 0x77745fff]
>DMAR: Prepare 0-16MiB unity mapping for LPC
>DMAR: Setting identity map for device 0000:00:1f.0 [0x0 - 0xffffff]
>DMAR: Intel(R) Virtualization Technology for Directed I/O
>iommu: Adding device 0000:00:00.0 to group 0
>iommu: Adding device 0000:00:00.1 to group 0
>iommu: Adding device 0000:00:02.0 to group 1
>iommu: Adding device 0000:00:0c.0 to group 2
>iommu: Adding device 0000:00:0e.0 to group 3
>iommu: Adding device 0000:00:0f.0 to group 4
>iommu: Adding device 0000:00:12.0 to group 5
>iommu: Adding device 0000:00:13.0 to group 6
>iommu: Adding device 0000:00:15.0 to group 7
>iommu: Adding device 0000:00:17.0 to group 8
>iommu: Adding device 0000:00:1c.0 to group 9
>iommu: Adding device 0000:00:1f.0 to group 10
>iommu: Adding device 0000:00:1f.1 to group 10
>RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
>RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
>RAPL PMU: hw unit of domain package 2^-14 Joules
>RAPL PMU: hw unit of domain dram 2^-14 Joules
>RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
>clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0xfc66f4fc7c, max_idle_ns: 440795224246 ns
>clocksource: Switched to clocksource tsc
>Initialise system trusted keyrings
>Key type blacklist registered
>workingset: timestamp_bits=46 max_order=21 bucket_order=0
>squashfs: version 4.0 (2009/01/31) Phillip Lougher
>fuse init (API version 7.27)
>pstore: using deflate compression
>Key type asymmetric registered
>Asymmetric key parser 'x509' registered
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
>io scheduler noop registered
>io scheduler cfq registered (default)
>pcieport 0000:00:13.0: Signaling PME with IRQ 122
>efifb: probing for efifb
>efifb: framebuffer at 0x90000000, using 8128k, total 8128k
>efifb: mode is 1920x1080x32, linelength=7680, pages=1
>efifb: scrolling: redraw
>efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
>Console: switching to colour frame buffer device 240x67
>fb0: EFI VGA frame buffer device
>intel_idle: MWAIT substates: 0x11242020
>intel_idle: v0.4.1 model 0x7A
>intel_idle: lapic_timer_reliable_states 0xffffffff
>ACPI: AC Adapter [ADP1] (off-line)
>input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
>ACPI: Lid Switch [LID0]
>input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
>ACPI: Sleep Button [SLPB]
>input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
>ACPI: Power Button [PWRF]
>thermal LNXTHERM:00: registered as thermal_zone0
>ACPI: Thermal Zone [TZ01] (39 C)
>Serial: 8250/16550 driver, 32 ports, IRQ sharing disabled
>battery: ACPI: Battery Slot [BAT0] (battery present)
>Non-volatile memory driver v1.3
>Linux agpgart interface v0.103
>[drm:drm_core_init] Initialized
>[drm:i915_driver_load] No PCH found.
>[drm:i915_driver_load] WOPCM size: 1024KiB
>[drm] GuC: No firmware known for this platform!
>[drm] HuC: No firmware known for this platform!
>[drm:intel_uc_init_early] enable_guc=0 (submission:no huc:no)
>[drm:i915_driver_load] guc_log_level=0 (enabled:no, verbose:no, verbosity:0)
>[drm:intel_power_domains_init] Allowed DC state mask 09
>[drm:__intel_uncore_early_sanitize] unclaimed mmio detected on uncore init, clearing
>[drm:i915_driver_load] ppgtt mode: 3
>[drm:i915_ggtt_probe_hw] GGTT size = 4096M
>[drm:i915_ggtt_probe_hw] GMADR size = 256M
>[drm:i915_ggtt_probe_hw] DSM size = 64M
>[drm] VT-d active for gfx access
>checking generic (90000000 7f0000) vs hw (90000000 10000000)
>fb: switching to inteldrmfb from EFI VGA
>Console: switching to colour dummy device 80x25
>[drm:i915_gem_init_stolen] GEN6_STOLEN_RESERVED = 7ff00047
>[drm:i915_gem_init_stolen] Memory reserved for graphics device: 65536K, usable: 64512K
>[drm:intel_gvt_init] GVT-g is disabled by kernel params
>[drm:intel_opregion_setup] graphic opregion physical addr: 0x777a6018
>[drm:intel_opregion_setup] Public ACPI methods supported
>[drm:intel_opregion_setup] ASLE supported
>[drm:intel_opregion_setup] Found valid VBT in ACPI OpRegion (RVDA)
>[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
>[drm] Driver supports precise vblank timestamp query.
>[drm:intel_bios_init] Set default to SSC at 100000 kHz
>[drm:intel_bios_init] VBT signature "$VBT GEMINILAKE     ", BDB version 212
>[drm:intel_bios_init] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0
>[drm:intel_bios_init] crt_ddc_bus_pin: 2
>[drm:intel_opregion_get_panel_type] Failed to get panel details from OpRegion (-19)
>[drm:intel_bios_init] Panel type: 2 (VBT)
>[drm:intel_bios_init] DRRS supported mode is seamless
>[drm:intel_bios_init] Found panel mode in BIOS VBT tables:
>[drm:drm_mode_debug_printmodeline] Modeline 0:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
>[drm:intel_bios_init] VBT initial LVDS value 300
>[drm:intel_bios_init] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 180, controller 0
>[drm:intel_bios_init] DRRS State Enabled:1
>[drm:intel_bios_init] Skipping SDVO device mapping
>[drm:intel_bios_init] Port A VBT info: DP:1 HDMI:0 DVI:0 EDP:1 CRT:0
>[drm:intel_bios_init] VBT HDMI level shift for port A: 0
>[drm:intel_bios_init] Port C VBT info: DP:0 HDMI:1 DVI:1 EDP:0 CRT:0
>[drm:intel_bios_init] VBT HDMI level shift for port C: 8
>[drm:intel_dsm_detect] no _DSM method for intel device
>[drm:gen9_set_dc_state] Setting DC state from 00 to 00
>[drm:intel_power_well_enable] enabling power well 1
>[drm:intel_dump_cdclk_state] Current CDCLK 316800 kHz, VCO 633600 kHz, ref 19200 kHz, bypass 19200 kHz, voltage level 13
>[drm:intel_power_well_enable] enabling always-on
>[drm:intel_power_well_enable] enabling DC off
>[drm:gen9_set_dc_state] Setting DC state from 00 to 00
>[drm:intel_power_well_enable] enabling power well 2
>[drm:intel_power_well_enable] enabling dpio-common-a
>[drm:bxt_ddi_phy_init] DDI PHY 1 already enabled, won't reprogram it
>[drm:intel_power_well_enable] enabling dpio-common-b
>[drm:intel_power_well_enable] enabling dpio-common-c
>[drm:intel_power_well_enable] enabling AUX A
>[drm:intel_power_well_enable] enabling AUX B
>[drm:intel_power_well_enable] enabling AUX C
>[drm:intel_csr_ucode_init] Loading i915/glk_dmc_ver1_04.bin
>[drm:drm_irq_install] irq=123
>[drm] Finished loading DMC firmware i915/glk_dmc_ver1_04.bin (v1.4)
>[drm:__bxt_hpd_detection_setup] Invert bit setting: hp_ctl:18001810 hp_port:38
>[drm:intel_fbc_init] Sanitized enable_fbc value: 1
>[drm:intel_print_wm_latency] Gen9 Plane WM0 latency 7 (7.0 usec)
>[drm:intel_print_wm_latency] Gen9 Plane WM1 latency 7 (7.0 usec)
>[drm:intel_print_wm_latency] Gen9 Plane WM2 latency 8 (8.0 usec)
>[drm:intel_print_wm_latency] Gen9 Plane WM3 latency 22 (22.0 usec)
>[drm:intel_print_wm_latency] Gen9 Plane WM4 latency 22 (22.0 usec)
>[drm:intel_print_wm_latency] Gen9 Plane WM5 latency 22 (22.0 usec)
>[drm:intel_print_wm_latency] Gen9 Plane WM6 latency 22 (22.0 usec)
>[drm:intel_print_wm_latency] Gen9 Plane WM7 latency 22 (22.0 usec)
>[drm:intel_modeset_init] 3 display pipes available.
>[drm:intel_dump_cdclk_state] Current CDCLK 316800 kHz, VCO 633600 kHz, ref 19200 kHz, bypass 19200 kHz, voltage level 13
>[drm:intel_update_max_cdclk] Max CD clock rate: 316800 kHz
>[drm:intel_modeset_init] Max dotclock rate: 627264 kHz
>[drm:intel_ddi_init] Forcing DDI_A_4_LANES for port A
>[drm:intel_dp_init_connector] Adding eDP connector on port A
>[drm:intel_dp_init_connector] using AUX A for port A (VBT)
>[drm:intel_pps_dump_state] cur t1_t3 0 t8 0 t9 0 t10 500 t11_t12 6000
>[drm:intel_pps_dump_state] vbt t1_t3 1500 t8 500 t9 2000 t10 500 t11_t12 6000
>[drm:intel_dp_init_panel_power_sequencer] panel power up delay 150, power down delay 50, power cycle delay 600
>[drm:intel_dp_init_panel_power_sequencer] backlight on delay 50, off delay 200
>[drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x5dc0001, PP_OFF 0x1f40001, PP_DIV 0x60
>[drm:edp_panel_vdd_on] Turning eDP port A VDD on
>[drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f
>[drm:intel_dp_read_dpcd] DPCD: 11 0a 82 41 00 00 01 40 02 00 00 00 00 03 00
>[drm:drm_dp_read_desc] DP sink: OUI 00-00-00 dev-ID  HW-rev 0.0 SW-rev 0.0 quirks 0x0000
>[drm:intel_dp_init_connector] eDP DPCD: 01 00 00
>[drm:drm_add_edid_modes.part.29] ELD: no CEA Extension found
>[drm:drm_add_display_info] non_desktop set to 0
>[drm:drm_add_display_info] eDP-1: Assigning EDID-1.4 digital sink color depth as 8 bpc.
>[drm:drm_add_display_info] non_desktop set to 0
>[drm:drm_add_display_info] eDP-1: Assigning EDID-1.4 digital sink color depth as 8 bpc.
>[drm:intel_dp_init_connector] Downclock mode is not found. DRRS not supported
>[drm:intel_panel_setup_backlight] Connector eDP-1 backlight initialized, enabled, brightness 67764/96000
>[drm:intel_setup_outputs] VBT says port B is not DVI/HDMI/DP compatible, respect it
>[drm:intel_hdmi_init_connector] Adding HDMI connector on port C
>[drm:intel_hdmi_init_connector] Using DDC pin 0x2 for port C (VBT)
>[drm:vlv_dsi_init] 
>[drm:intel_modeset_setup_hw_state] pipe A active planes 0x1
>[drm:intel_modeset_setup_hw_state] pipe A active planes 0x1
>[drm:intel_modeset_setup_hw_state] pipe A active planes 0x1
>[drm:intel_modeset_setup_hw_state] pipe A active planes 0x1
>[drm:intel_modeset_setup_hw_state] pipe A active planes 0x1
>[drm:intel_modeset_setup_hw_state] [CRTC:51:pipe A] hw state readout: enabled
>[drm:intel_modeset_setup_hw_state] pipe B active planes 0x0
>[drm:intel_modeset_setup_hw_state] pipe B active planes 0x0
>[drm:intel_modeset_setup_hw_state] pipe B active planes 0x0
>[drm:intel_modeset_setup_hw_state] pipe B active planes 0x0
>[drm:intel_modeset_setup_hw_state] pipe B active planes 0x0
>[drm:intel_modeset_setup_hw_state] [CRTC:75:pipe B] hw state readout: disabled
>[drm:intel_modeset_setup_hw_state] pipe C active planes 0x0
>[drm:intel_modeset_setup_hw_state] pipe C active planes 0x0
>[drm:intel_modeset_setup_hw_state] pipe C active planes 0x0
>[drm:intel_modeset_setup_hw_state] pipe C active planes 0x0
>[drm:intel_modeset_setup_hw_state] pipe C active planes 0x0
>[drm:intel_modeset_setup_hw_state] [CRTC:99:pipe C] hw state readout: disabled
>[drm:intel_modeset_setup_hw_state] PORT PLL A hw state readout: crtc_mask 0x00000001, on 1
>[drm:intel_modeset_setup_hw_state] PORT PLL B hw state readout: crtc_mask 0x00000000, on 0
>[drm:intel_modeset_setup_hw_state] PORT PLL C hw state readout: crtc_mask 0x00000000, on 0
>[drm:intel_ddi_get_config] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp
>[drm:intel_modeset_setup_hw_state] [ENCODER:100:DDI A] hw state readout: enabled, pipe A
>[drm:intel_modeset_setup_hw_state] [ENCODER:107:DDI C] hw state readout: disabled, pipe A
>[drm:intel_modeset_setup_hw_state] [CONNECTOR:101:eDP-1] hw state readout: enabled
>[drm:intel_modeset_setup_hw_state] [CONNECTOR:108:HDMI-A-1] hw state readout: disabled
>[drm:drm_calc_timestamping_constants] crtc 51: hwmode: htotal 2250, vtotal 1132, vdisplay 1080
>[drm:intel_modeset_setup_hw_state] crtc 51: clock 152839 kHz framedur 16664594 linedur 14721
>[drm:intel_power_well_enable] enabling DDI A IO power well
>[drm:intel_dump_pipe_config] [CRTC:51:pipe A][setup_hw_state]
>[drm:intel_dump_pipe_config] output_types: EDP (0x100)
>[drm:intel_dump_pipe_config] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0
>[drm:intel_dump_m_n_config.isra.67] dp m_n: lanes: 2; gmch_m: 7122860, gmch_n: 8388608, link_m: 296785, link_n: 524288, tu: 64
>[drm:intel_dump_pipe_config] audio: 0, infoframes: 0
>[drm:intel_dump_pipe_config] requested mode:
>[drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 152839 1920 2000 2060 2250 1080 1086 1094 1132 0x40 0xa
>[drm:intel_dump_pipe_config] adjusted mode:
>[drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 152839 1920 2000 2060 2250 1080 1086 1094 1132 0x40 0xa
>[drm:intel_dump_pipe_config] crtc timings: 152839 1920 2000 2060 2250 1080 1086 1094 1132, type: 0x40 flags: 0xa
>[drm:intel_dump_pipe_config] port clock: 270000, pipe src size: 1920x1080, pixel rate 152839
>[drm:intel_dump_pipe_config] num_scalers: 2, scaler_users: 0x0, scaler_id: -1
>[drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[drm:intel_dump_pipe_config] ips: 0, double wide: 0
>[drm:bxt_dump_hw_state] dpll_hw_state: ebb0: 0x8100, ebb4: 0x2000,pll0: 0x1b, pll1: 0x100, pll2: 0x0, pll3: 0x0, pll6: 0x10803, pll8: 0x9, pll9: 0xa, pll10: 0x8003c00, pcsdw12: 0x4d
>[drm:intel_dump_pipe_config] planes on this crtc
>[drm:intel_dump_pipe_config] [PLANE:28:plane 1A] disabled, scaler_id = -1
>[drm:intel_dump_pipe_config] [PLANE:33:plane 2A] disabled, scaler_id = -1
>[drm:intel_dump_pipe_config] [PLANE:38:plane 3A] disabled, scaler_id = -1
>[drm:intel_dump_pipe_config] [PLANE:43:plane 4A] disabled, scaler_id = -1
>[drm:intel_dump_pipe_config] [PLANE:48:cursor A] disabled, scaler_id = -1
>[drm:intel_dump_pipe_config] [CRTC:75:pipe B][setup_hw_state]
>[drm:intel_dump_pipe_config] output_types:  (0x0)
>[drm:intel_dump_pipe_config] cpu_transcoder: B, pipe bpp: 0, dithering: 0
>[drm:intel_dump_pipe_config] audio: 0, infoframes: 0
>[drm:intel_dump_pipe_config] requested mode:
>[drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[drm:intel_dump_pipe_config] adjusted mode:
>[drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[drm:intel_dump_pipe_config] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[drm:intel_dump_pipe_config] port clock: 0, pipe src size: 0x0, pixel rate 0
>[drm:intel_dump_pipe_config] num_scalers: 2, scaler_users: 0x0, scaler_id: -1
>[drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[drm:intel_dump_pipe_config] ips: 0, double wide: 0
>[drm:bxt_dump_hw_state] dpll_hw_state: ebb0: 0x0, ebb4: 0x0,pll0: 0x0, pll1: 0x0, pll2: 0x0, pll3: 0x0, pll6: 0x0, pll8: 0x0, pll9: 0x0, pll10: 0x0, pcsdw12: 0x0
>[drm:intel_dump_pipe_config] planes on this crtc
>[drm:intel_dump_pipe_config] [PLANE:52:plane 1B] disabled, scaler_id = -1
>[drm:intel_dump_pipe_config] [PLANE:57:plane 2B] disabled, scaler_id = -1
>[drm:intel_dump_pipe_config] [PLANE:62:plane 3B] disabled, scaler_id = -1
>[drm:intel_dump_pipe_config] [PLANE:67:plane 4B] disabled, scaler_id = -1
>[drm:intel_dump_pipe_config] [PLANE:72:cursor B] disabled, scaler_id = -1
>[drm:intel_dump_pipe_config] [CRTC:99:pipe C][setup_hw_state]
>[drm:intel_dump_pipe_config] output_types:  (0x0)
>[drm:intel_dump_pipe_config] cpu_transcoder: C, pipe bpp: 0, dithering: 0
>[drm:intel_dump_pipe_config] audio: 0, infoframes: 0
>[drm:intel_dump_pipe_config] requested mode:
>[drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[drm:intel_dump_pipe_config] adjusted mode:
>[drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[drm:intel_dump_pipe_config] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[drm:intel_dump_pipe_config] port clock: 0, pipe src size: 0x0, pixel rate 0
>[drm:intel_dump_pipe_config] num_scalers: 1, scaler_users: 0x0, scaler_id: -1
>[drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[drm:intel_dump_pipe_config] ips: 0, double wide: 0
>[drm:bxt_dump_hw_state] dpll_hw_state: ebb0: 0x0, ebb4: 0x0,pll0: 0x0, pll1: 0x0, pll2: 0x0, pll3: 0x0, pll6: 0x0, pll8: 0x0, pll9: 0x0, pll10: 0x0, pcsdw12: 0x0
>[drm:intel_dump_pipe_config] planes on this crtc
>[drm:intel_dump_pipe_config] [PLANE:76:plane 1C] disabled, scaler_id = -1
>[drm:intel_dump_pipe_config] [PLANE:81:plane 2C] disabled, scaler_id = -1
>[drm:intel_dump_pipe_config] [PLANE:86:plane 3C] disabled, scaler_id = -1
>[drm:intel_dump_pipe_config] [PLANE:91:plane 4C] disabled, scaler_id = -1
>[drm:intel_dump_pipe_config] [PLANE:96:cursor C] disabled, scaler_id = -1
>[drm:drm_mode_object_get] OBJ ID: 101 (2)
>[drm:intel_power_well_disable] disabling AUX C
>[drm:intel_power_well_disable] disabling AUX B
>[drm:intel_power_well_disable] disabling dpio-common-c
>[drm:intel_power_well_disable] disabling dpio-common-b
>[drm:intel_power_well_disable] disabling power well 2
>[drm:skylake_get_initial_plane_config] pipe A/plane 1A with fb: size=1920x1080@32, offset=0, pitch 7680, size 0x7e9000
>[drm:i915_gem_object_create_stolen_for_preallocated] creating preallocated stolen object: stolen_offset=0x0000000000000000, gtt_offset=0x0000000000000000, size=0x00000000007e9000
>[drm:intel_alloc_initial_plane_obj.isra.101] initial plane fb obj 00000000457c96eb
>[drm:intel_modeset_init] pipe A active planes 0x1
>[drm:intel_wopcm_init] Calculated GuC WOPCM Region: [16KiB, 984KiB)
>[drm:i915_gem_init_ggtt] clearing unused GTT space: [7ea000, 100000000]
>[drm:intel_ctx_workarounds_init] Number of context specific w/a: 10
>[drm:i915_gem_contexts_init] logical context support initialized
>[drm:intel_init_gt_powersave] BIOS enabled RC states: HW_CTRL off HW_RC6 off SW_TARGET_STATE 4
>i915 0000:00:02.0: Failed to initialize GPU, declaring it wedged!
>i915 0000:00:02.0: Please file a bug at https://bugs.freedesktop.org/enter_bug.cgi?product=DRI against DRM/Intel providing the dmesg log by booting with drm.debug=0xf
>[drm:intel_fbdev_init] found possible fb from plane A
>[drm:intel_fbdev_init] pipe B not active or no fb, skipping
>[drm:intel_fbdev_init] pipe C not active or no fb, skipping
>[drm:intel_fbdev_init] checking plane A for BIOS fb
>[drm:intel_fbdev_init] pipe A area: 1920x1080, bpp: 32, size: 8294400
>[drm:intel_fbdev_init] fb big enough for plane A (8294400 >= 8294400)
>[drm:intel_fbdev_init] pipe B not active, skipping
>[drm:intel_fbdev_init] pipe C not active, skipping
>[drm:drm_mode_object_get] OBJ ID: 114 (1)
>[drm:intel_fbdev_init] using BIOS fb for initial console
>[drm:drm_mode_object_get] OBJ ID: 101 (3)
>[drm:drm_mode_object_get] OBJ ID: 108 (2)
>[drm:__bxt_hpd_detection_setup] Invert bit setting: hp_ctl:18001810 hp_port:28
>[drm:drm_minor_register] 
>[drm:drm_minor_register] new minor registered 128
>[drm:drm_minor_register] 
>[drm:drm_minor_register] new minor registered 0
>[drm:drm_sysfs_connector_add] adding "eDP-1" to sysfs
>[drm:drm_sysfs_hotplug_event] generating hotplug event
>[drm:intel_backlight_device_register] Connector eDP-1 backlight sysfs interface registered
>[drm:intel_dp_connector_register] registering DPDDC-A bus for card0-eDP-1
>[drm:drm_dp_aux_register_devnode] drm_dp_aux_dev: aux [DPDDC-A] registered as minor 0
>[drm:drm_sysfs_connector_add] adding "HDMI-A-1" to sysfs
>[drm:drm_sysfs_hotplug_event] generating hotplug event
>[drm] Initialized i915 1.6.0 20180719 for 0000:00:02.0 on minor 0
>[drm:intel_opregion_register] 2 outputs detected
>ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
>input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
>i915 device info: pciid=0x3184 rev=0x03 platform=GEMINILAKE gen=9
>i915 device info: is_mobile: no
>i915 device info: is_lp: yes
>i915 device info: is_alpha_support: no
>i915 device info: has_64bit_reloc: yes
>i915 device info: has_aliasing_ppgtt: yes
>i915 device info: has_csr: yes
>i915 device info: has_ddi: yes
>i915 device info: has_dp_mst: yes
>i915 device info: has_reset_engine: yes
>i915 device info: has_fbc: yes
>[drm:drm_setup_crtcs] 
>i915 device info: has_fpga_dbg: yes
>i915 device info: has_full_ppgtt: yes
>i915 device info: has_full_48bit_ppgtt: yes
>[drm:drm_helper_probe_single_connector_modes] [CONNECTOR:101:eDP-1]
>i915 device info: has_gmch_display: no
>[drm:intel_dp_detect] [CONNECTOR:101:eDP-1]
>i915 device info: has_guc: yes
>i915 device info: has_guc_ct: no
>i915 device info: has_hotplug: yes
>[drm:intel_dp_print_rates] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000
>i915 device info: has_l3_dpf: no
>[drm:intel_dp_print_rates] sink rates: 162000, 270000
>i915 device info: has_llc: no
>[drm:intel_dp_print_rates] common rates: 162000, 270000
>i915 device info: has_logical_ring_contexts: yes
>i915 device info: has_logical_ring_elsq: no
>i915 device info: has_logical_ring_preemption: yes
>i915 device info: has_overlay: no
>i915 device info: has_pooled_eu: yes
>i915 device info: has_psr: yes
>i915 device info: has_rc6: yes
>i915 device info: has_rc6p: no
>i915 device info: has_resource_streamer: yes
>i915 device info: has_runtime_pm: yes
>i915 device info: has_snoop: yes
>i915 device info: unfenced_needs_alignment: no
>i915 device info: cursor_needs_physical: no
>i915 device info: hws_needs_physical: no
>i915 device info: overlay_needs_physical: no
>i915 device info: supports_tv: no
>i915 device info: has_ipc: yes
>i915 device info: slice total: 1, mask=0001
>i915 device info: subslice total: 3
>i915 device info: slice0: 3 subslices, mask=0007
>i915 device info: EU total: 18
>i915 device info: EU per subslice: 6
>i915 device info: has slice power gating: no
>i915 device info: has subslice power gating: yes
>i915 device info: has EU power gating: yes
>i915 device info: CS timestamp frequency: 19200 kHz
>[drm:drm_dp_read_desc] DP sink: OUI 00-00-00 dev-ID  HW-rev 0.0 SW-rev 0.0 quirks 0x0000
>[drm:drm_helper_probe_single_connector_modes] [CONNECTOR:101:eDP-1] status updated from unknown to connected
>[drm:drm_add_display_info] non_desktop set to 0
>[drm:drm_add_display_info] eDP-1: Assigning EDID-1.4 digital sink color depth as 8 bpc.
>[drm:drm_mode_object_put] OBJ ID: 103 (1)
>[drm:drm_add_edid_modes.part.29] ELD: no CEA Extension found
>[drm:drm_add_display_info] non_desktop set to 0
>[drm:drm_add_display_info] eDP-1: Assigning EDID-1.4 digital sink color depth as 8 bpc.
>[drm:drm_helper_probe_single_connector_modes] [CONNECTOR:101:eDP-1] probed modes :
>[drm:drm_mode_debug_printmodeline] Modeline 102:"1920x1080" 60 152840 1920 2000 2060 2250 1080 1086 1094 1132 0x48 0xa
>[drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:HDMI-A-1]
>[drm:intel_hdmi_detect] [CONNECTOR:108:HDMI-A-1]
>[drm:drm_sysfs_hotplug_event] generating hotplug event
>[drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[drm:intel_hdmi_set_edid] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
>[drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus dpc. force bit now 1
>[drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus dpc. force bit now 0
>[drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[drm:drm_dp_dual_mode_detect] DP dual mode HDMI ID:  (err -6)
>[drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:HDMI-A-1] status updated from unknown to disconnected
>[drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:HDMI-A-1] disconnected
>[drm:drm_setup_crtcs] connector 101 enabled? yes
>[drm:drm_setup_crtcs] connector 108 enabled? no
>[drm:intel_fb_initial_config] Not using firmware configuration
>[drm:drm_setup_crtcs] looking for cmdline mode on connector 101
>[drm:drm_setup_crtcs] looking for preferred mode on connector 101 0
>[drm:drm_setup_crtcs] found mode 1920x1080
>[drm:drm_setup_crtcs] picking CRTCs for 8192x8192 config
>[drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 51 (0,0)
>[drm:drm_mode_object_get] OBJ ID: 101 (3)
>[drm:intelfb_create] re-using BIOS fb
>[drm:intelfb_create] allocated 1920x1080 fb: 0x00000000
>[drm:drm_mode_object_get] OBJ ID: 114 (2)
>[drm:drm_mode_object_get] OBJ ID: 113 (1)
>[drm:drm_mode_object_put] OBJ ID: 113 (2)
>[drm:drm_mode_object_get] OBJ ID: 114 (3)
>[drm:drm_mode_object_put] OBJ ID: 114 (4)
>[drm:drm_mode_object_get] OBJ ID: 101 (5)
>[drm:drm_mode_object_get] OBJ ID: 101 (6)
>[drm:drm_mode_object_put] OBJ ID: 101 (6)
>[drm:drm_mode_object_get] OBJ ID: 101 (5)
>[drm:intel_atomic_check] [CONNECTOR:101:eDP-1] checking for sink bpp constrains
>[drm:intel_atomic_check] clamping display bpp (was 36) to EDID reported max of 24
>[drm:intel_dp_compute_config] DP link computation with max lane count 2 max rate 270000 max bpp 24 pixel clock 152840KHz
>[drm:intel_dp_compute_config] DP lane count 2 clock 270000 bpp 24
>[drm:intel_dp_compute_config] DP link rate required 458520 available 540000
>[drm:intel_atomic_check] hw max bpp: 36, pipe bpp: 24, dithering: 0
>[drm:intel_dump_pipe_config] [CRTC:51:pipe A][modeset]
>[drm:intel_dump_pipe_config] output_types: EDP (0x100)
>[drm:intel_dump_pipe_config] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0
>[drm:intel_dump_m_n_config.isra.67] dp m_n: lanes: 2; gmch_m: 7122860, gmch_n: 8388608, link_m: 296785, link_n: 524288, tu: 64
>[drm:intel_dump_pipe_config] audio: 0, infoframes: 0
>[drm:intel_dump_pipe_config] requested mode:
>[drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 152840 1920 2000 2060 2250 1080 1086 1094 1132 0x48 0xa
>[drm:intel_dump_pipe_config] adjusted mode:
>[drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 152840 1920 2000 2060 2250 1080 1086 1094 1132 0x48 0xa
>[drm:intel_dump_pipe_config] crtc timings: 152840 1920 2000 2060 2250 1080 1086 1094 1132, type: 0x48 flags: 0xa
>[drm:intel_dump_pipe_config] port clock: 270000, pipe src size: 1920x1080, pixel rate 152840
>[drm:intel_dump_pipe_config] num_scalers: 2, scaler_users: 0x0, scaler_id: -1
>[drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[drm:intel_dump_pipe_config] ips: 0, double wide: 0
>[drm:bxt_dump_hw_state] dpll_hw_state: ebb0: 0x8100, ebb4: 0x2000,pll0: 0x1b, pll1: 0x100, pll2: 0x0, pll3: 0x0, pll6: 0x10803, pll8: 0x9, pll9: 0xa, pll10: 0x8003c00, pcsdw12: 0x4d
>[drm:intel_dump_pipe_config] planes on this crtc
>[drm:intel_dump_pipe_config] [PLANE:28:plane 1A] FB:114, fb = 1920x1080 format = XR24 little-endian (0x34325258)
>[drm:intel_dump_pipe_config] 	scaler:-1 src 0x0+1920+1080 dst 0x0+1920+1080
>[drm:intel_dump_pipe_config] [PLANE:33:plane 2A] disabled, scaler_id = -1
>[drm:intel_dump_pipe_config] [PLANE:38:plane 3A] disabled, scaler_id = -1
>[drm:intel_dump_pipe_config] [PLANE:43:plane 4A] disabled, scaler_id = -1
>[drm:intel_dump_pipe_config] [PLANE:48:cursor A] disabled, scaler_id = -1
>[drm:intel_atomic_check] New cdclk calculated to be logical 316800 kHz, actual 316800 kHz
>[drm:intel_atomic_check] New voltage level calculated to be logical 13, actual 13
>[drm:bxt_get_dpll] [CRTC:51:pipe A] using pre-allocated PORT PLL A
>[drm:intel_reference_shared_dpll] using PORT PLL A for pipe A
>[drm:intel_edp_backlight_off] 
>brd: module loaded
>loop: module loaded
>ahci 0000:00:12.0: version 3.0
>ahci 0000:00:12.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
>ahci 0000:00:12.0: flags: 64bit ncq sntf pm clo only pmp pio slum part deso sadm sds apst 
>scsi host0: ahci
>ata1: SATA max UDMA/133 abar m2048@0xa111f000 port 0xa111f100 irq 124
>Intel(R) Wireless WiFi driver for Linux
>Copyright(c) 2003- 2015 Intel Corporation
>usbcore: registered new interface driver r8152
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ehci-pci: EHCI PCI platform driver
>iwlwifi 0000:00:0c.0: loaded firmware version 38.c0e03d94.0 op_mode iwlmvm
>iwlwifi 0000:00:0c.0: Detected Intel(R) Dual Band Wireless AC 9560, REV=0x318
>xhci_hcd 0000:00:15.0: xHCI Host Controller
>xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 1
>xhci_hcd 0000:00:15.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: xHCI Host Controller
>usb usb1: Manufacturer: Linux 4.19.0-rc5-1-default xhci-hcd
>usb usb1: SerialNumber: 0000:00:15.0
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 9 ports detected
>xhci_hcd 0000:00:15.0: xHCI Host Controller
>xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 2
>xhci_hcd 0000:00:15.0: Host supports USB 3.0  SuperSpeed
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: xHCI Host Controller
>usb usb2: Manufacturer: Linux 4.19.0-rc5-1-default xhci-hcd
>usb usb2: SerialNumber: 0000:00:15.0
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 7 ports detected
>usb: port power management may be unreliable
>usbcore: registered new interface driver usblp
>usbcore: registered new interface driver uas
>usbcore: registered new interface driver usb-storage
>usbcore: registered new interface driver ums-realtek
>i8042: PNP: PS/2 Controller [PNP0303:KBD0] at 0x60,0x64 irq 1
>i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
>serio: i8042 KBD port at 0x60,0x64 irq 1
>mousedev: PS/2 mouse device common for all mice
>rtc_cmos 00:03: RTC can wake from S4
>rtc_cmos 00:03: registered as rtc0
>rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
>intel_pstate: Intel P-state driver initializing
>ledtrig-cpu: registered to indicate activity on CPUs
>EFI Variables Facility v0.08 2004-May-17
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
>iwlwifi 0000:00:0c.0: base HW address: 14:4f:8a:10:f9:e6
>hidraw: raw HID events driver (C) Jiri Kosina
>Initializing XFRM netlink socket
>NET: Registered protocol family 10
>Segment Routing with IPv6
>NET: Registered protocol family 17
>NET: Registered protocol family 15
>RAS: Correctable Errors collector initialized.
>microcode: sig=0x706a1, pf=0x1, revision=0x28
>microcode: Microcode Update Driver: v2.2.
>SSE version of gcm_enc/dec engaged.
>sched_clock: Marking stable (2416325992, -2527896)->(2457785759, -43987663)
>registered taskstats version 1
>Loading compiled-in X.509 certificates
>Loaded X.509 cert 'Build time autogenerated kernel key: 8eaa1d35ed8eaff55362645fb00af8c60759fbd0'
>Btrfs loaded, crc32c=crc32c-generic, assert=on
>rtc_cmos 00:03: setting system clock to 2018-10-02 10:13:33 UTC (1538475213)
>cfg80211: Loading compiled-in X.509 certificates for regulatory database
>ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
>cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
>ALSA device list:
>  No soundcards found.
>thermal thermal_zone5: failed to read out thermal zone (-61)
>platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
>cfg80211: failed to load regulatory.db
>[drm:intel_panel_actually_set_backlight] set backlight PWM = 0
>[drm:intel_disable_pipe] disabling pipe A
>[drm:intel_edp_panel_off] Turn eDP port A panel power off
>[drm:intel_edp_panel_off] Wait for panel power off time
>[drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control 00000060
>[drm:gen8_de_irq_handler] hotplug event received, stat 0x00000008, dig 0x19001810, pins 0x00000010, long 0x00000000
>[drm:intel_hpd_irq_handler] digital hpd port A - short
>[drm:intel_dp_hpd_pulse] got hpd irq on port A - short
>[drm:wait_panel_status] Wait complete
>[drm:intel_power_well_disable] disabling DDI A IO power well
>[drm:intel_disable_shared_dpll] disable PORT PLL A (active 1, on? 1) for crtc 51
>[drm:edp_panel_vdd_on] Turning eDP port A VDD on
>[drm:wait_panel_power_cycle] Wait for panel power cycle
>[drm:intel_disable_shared_dpll] disabling PORT PLL A
>[drm:drm_calc_timestamping_constants] crtc 51: hwmode: htotal 2250, vtotal 1132, vdisplay 1080
>[drm:drm_atomic_helper_update_legacy_modeset_state] crtc 51: clock 152840 kHz framedur 16664485 linedur 14721
>[drm:intel_atomic_commit_tail] [ENCODER:100:DDI A]
>[drm:intel_atomic_commit_tail] [ENCODER:107:DDI C]
>[drm:verify_single_dpll_state.isra.94] PORT PLL A
>[drm:verify_single_dpll_state.isra.94] PORT PLL B
>[drm:verify_single_dpll_state.isra.94] PORT PLL C
>[drm:intel_enable_shared_dpll] enable PORT PLL A (active 1, on? 0) for crtc 51
>[drm:intel_enable_shared_dpll] enabling PORT PLL A
>[drm:gen8_de_irq_handler] hotplug event received, stat 0x00000008, dig 0x1a001810, pins 0x00000010, long 0x00000010
>[drm:intel_hpd_irq_handler] digital hpd port A - long
>[drm:intel_hpd_irq_handler] Received HPD interrupt on PIN 4 - cnt: 0
>usb 2-6: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
>usb 2-6: New USB device found, idVendor=174c, idProduct=1153, bcdDevice= 0.01
>usb 2-6: New USB device strings: Mfr=2, Product=3, SerialNumber=1
>usb 2-6: Product: AS2115
>usb 2-6: Manufacturer: ASMedia
>usb 2-6: SerialNumber: 00000000000000000000
>scsi host1: uas
>scsi 1:0:0:0: Direct-Access     ASMT     2115             0    PQ: 0 ANSI: 6
>sd 1:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
>sd 1:0:0:0: [sda] Write Protect is off
>sd 1:0:0:0: [sda] Mode Sense: 43 00 00 00
>sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2
>sd 1:0:0:0: [sda] Attached SCSI disk
>ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>ata1.00: ATA-9: HFS256G39TND-N210A, 30001P10, max UDMA/133
>ata1.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 32), AA
>ata1.00: configured for UDMA/133
>usb 1-1: new full-speed USB device number 2 using xhci_hcd
>usb 1-1: New USB device found, idVendor=1c7a, idProduct=0570, bcdDevice=10.41
>usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 1-1: Product: EgisTec Touch Fingerprint Sensor
>usb 1-1: Manufacturer: EgisTec
>usb 1-1: SerialNumber: 070BFC82
>usb 1-4: new full-speed USB device number 3 using xhci_hcd
>[drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control 00000060
>[drm:wait_panel_status] Wait complete
>[drm:edp_panel_vdd_on] PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068
>[drm:edp_panel_vdd_on] eDP port A panel power wasn't enabled
>usb 1-4: New USB device found, idVendor=046d, idProduct=c080, bcdDevice=95.01
>usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 1-4: Product: Gaming Mouse G303
>usb 1-4: Manufacturer: Logitech
>usb 1-4: SerialNumber: 157B34643937
>[drm:gen8_de_irq_handler] hotplug event received, stat 0x00000008, dig 0x1a001810, pins 0x00000010, long 0x00000010
>[drm:intel_hpd_irq_handler] digital hpd port A - long
>[drm:intel_hpd_irq_handler] Received HPD interrupt on PIN 4 - cnt: 1
>[drm:edp_panel_on] Turn eDP port A panel power on
>[drm:wait_panel_power_cycle] Wait for panel power cycle
>[drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control 00000068
>[drm:wait_panel_status] Wait complete
>[drm:edp_panel_on] Wait for panel power on
>[drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control 0000006b
>usb 1-6: new high-speed USB device number 4 using xhci_hcd
>[drm:wait_panel_status] Wait complete
>[drm:intel_power_well_enable] enabling DDI A IO power well
>[drm:intel_dp_read_dpcd] DPCD: 11 0a 82 41 00 00 01 40 02 00 00 00 00 03 00
>[drm:intel_dp_hpd_pulse] ignoring long hpd on eDP port A
>[drm:intel_dp_start_link_train] Using LINK_BW_SET value 0a
>[drm:intel_dp_set_signal_levels] Using vswing level 0
>[drm:intel_dp_set_signal_levels] Using pre-emphasis level 0
>[drm:intel_dp_program_link_training_pattern] Using DP training pattern TPS1
>[drm:intel_dp_start_link_train] clock recovery OK
>[drm:intel_dp_program_link_training_pattern] Using DP training pattern TPS2
>[drm:intel_dp_start_link_train] Channel EQ done. DP Training successful
>[drm:intel_dp_start_link_train] [CONNECTOR:101:eDP-1] Link Training Passed at Link Rate = 270000, Lane count = 2
>[drm:intel_enable_pipe] enabling pipe A
>[drm:intel_edp_backlight_on] 
>[drm:intel_panel_enable_backlight] pipe A
>[drm:intel_panel_actually_set_backlight] set backlight PWM = 67764
>usb 1-6: New USB device found, idVendor=0951, idProduct=1624, bcdDevice= 2.00
>usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 1-6: Product: DataTraveler G2
>usb 1-6: Manufacturer: Kingston
>usb 1-6: SerialNumber: 0019E000B46EA931965C010E
>usb-storage 1-6:1.0: USB Mass Storage device detected
>scsi host2: usb-storage 1-6:1.0
>[drm:intel_enable_ddi] Panel doesn't support DRRS
>[drm:intel_fbc_enable] reserved 16588800 bytes of contiguous stolen space for FBC, threshold: 1
>[drm:intel_fbc_enable] Enabling FBC on pipe A
>[drm:drm_vblank_enable] enabling vblank on crtc 0, ret: 0
>[drm:drm_handle_vblank] vblank event on 7, current 7
>[drm:verify_connector_state.isra.93] [CONNECTOR:101:eDP-1]
>[drm:drm_mode_object_put] OBJ ID: 113 (1)
>[drm:intel_atomic_commit_tail] [CRTC:51:pipe A]
>[drm:verify_single_dpll_state.isra.94] PORT PLL A
>snd_hda_intel 0000:00:0e.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops)
>[drm:drm_mode_object_get] OBJ ID: 114 (3)
>[drm:intel_power_well_enable] enabling power well 2
>[drm:drm_mode_object_get] OBJ ID: 116 (1)
>[drm:i915_hotplug_work_func] running encoder hotplug functions
>[drm:drm_mode_object_put] OBJ ID: 116 (2)
>[drm:i915_hotplug_work_func] Connector eDP-1 (pin 4) received hotplug event.
>[drm:drm_mode_object_get] OBJ ID: 114 (4)
>[drm:intel_dp_detect] [CONNECTOR:101:eDP-1]
>[drm:drm_mode_object_put] OBJ ID: 114 (5)
>[drm:drm_mode_object_put] OBJ ID: 101 (7)
>[drm:drm_mode_object_put] OBJ ID: 101 (6)
>[drm:drm_mode_object_put] OBJ ID: 114 (4)
>[drm:drm_mode_object_get] OBJ ID: 101 (6)
>[drm:drm_mode_object_get] OBJ ID: 101 (7)
>[drm:drm_mode_object_put] OBJ ID: 101 (7)
>[drm:drm_mode_object_get] OBJ ID: 101 (6)
>[drm:drm_handle_vblank] vblank event on 8, current 8
>random: fast init done
>[drm:drm_mode_object_put] OBJ ID: 101 (7)
>[drm:drm_mode_object_put] OBJ ID: 101 (6)
>[drm:drm_mode_object_put] OBJ ID: 116 (1)
>[drm:drm_mode_object_put] OBJ ID: 114 (3)
>[drm:intel_dp_detect] [CONNECTOR:101:eDP-1]
>[drm:intel_dp_print_rates] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000
>[drm:intel_dp_print_rates] sink rates: 162000, 270000
>[drm:intel_dp_print_rates] common rates: 162000, 270000
>[drm:drm_dp_read_desc] DP sink: OUI 00-00-00 dev-ID  HW-rev 0.0 SW-rev 0.0 quirks 0x0000
>snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC256: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
>snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
>snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
>snd_hda_codec_realtek hdaudioC0D0:    inputs:
>snd_hda_codec_realtek hdaudioC0D0:      Mic=0x12
>Console: switching to colour frame buffer device 240x67
>[drm:drm_mode_object_get] OBJ ID: 114 (2)
>[drm:drm_mode_object_get] OBJ ID: 113 (1)
>[drm:drm_mode_object_put] OBJ ID: 113 (2)
>[drm:drm_mode_object_get] OBJ ID: 114 (3)
>[drm:drm_mode_object_put] OBJ ID: 114 (4)
>[drm:drm_mode_object_get] OBJ ID: 101 (5)
>[drm:drm_mode_object_get] OBJ ID: 101 (6)
>[drm:drm_mode_object_put] OBJ ID: 101 (6)
>[drm:drm_mode_object_get] OBJ ID: 101 (5)
>[drm:drm_handle_vblank] vblank event on 9, current 9
>[drm:drm_mode_object_put] OBJ ID: 101 (6)
>[drm:drm_mode_object_put] OBJ ID: 101 (5)
>[drm:drm_mode_object_put] OBJ ID: 113 (1)
>[drm:drm_mode_object_put] OBJ ID: 114 (3)
>[drm:vblank_disable_fn] disabling vblank on crtc 0
>i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
>[drm:i915_audio_component_get_eld] Not valid for port B
>[drm:drm_fb_helper_hotplug_event] 
>[drm:i915_audio_component_get_eld] Not valid for port B
>[drm:drm_setup_crtcs] 
>[drm:i915_audio_component_get_eld] Not valid for port B
>[drm:i915_audio_component_get_eld] Not valid for port C
>[drm:drm_helper_probe_single_connector_modes] [CONNECTOR:101:eDP-1]
>[drm:i915_audio_component_get_eld] Not valid for port C
>usb 1-7: new high-speed USB device number 5 using xhci_hcd
>[drm:intel_dp_detect] [CONNECTOR:101:eDP-1]
>[drm:intel_dp_print_rates] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000
>[drm:intel_dp_print_rates] sink rates: 162000, 270000
>[drm:i915_audio_component_get_eld] Not valid for port C
>[drm:intel_dp_print_rates] common rates: 162000, 270000
>[drm:i915_audio_component_get_eld] Not valid for port D
>scsi 0:0:0:0: Direct-Access     ATA      HFS256G39TND-N21 1P10 PQ: 0 ANSI: 5
>[drm:i915_audio_component_get_eld] Not valid for port D
>[drm:drm_dp_read_desc] DP sink: OUI 00-00-00 dev-ID  HW-rev 0.0 SW-rev 0.0 quirks 0x0000
>sd 0:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB)
>sd 0:0:0:0: [sdb] 4096-byte physical blocks
>sd 0:0:0:0: [sdb] Write Protect is off
>sd 0:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[drm:i915_audio_component_get_eld] Not valid for port D
> sdb: sdb1 sdb2 sdb3 sdb4 sdb5
>input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:0e.0/sound/card0/input5
>sd 0:0:0:0: [sdb] Attached SCSI disk
>[drm:drm_add_display_info] non_desktop set to 0
>input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:0e.0/sound/card0/input6
>[drm:drm_add_display_info] eDP-1: Assigning EDID-1.4 digital sink color depth as 8 bpc.
>input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input7
>[drm:drm_mode_object_put] OBJ ID: 115 (1)
>input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input8
>[drm:drm_add_edid_modes.part.29] ELD: no CEA Extension found
>input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input9
>[drm:drm_add_display_info] non_desktop set to 0
>input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input10
>[drm:drm_add_display_info] eDP-1: Assigning EDID-1.4 digital sink color depth as 8 bpc.
>[drm:drm_helper_probe_single_connector_modes] [CONNECTOR:101:eDP-1] probed modes :
>input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input11
>[drm:drm_mode_debug_printmodeline] Modeline 102:"1920x1080" 60 152840 1920 2000 2060 2250 1080 1086 1094 1132 0x48 0xa
>[drm:intel_power_well_disable] disabling power well 2
>[drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:HDMI-A-1]
>[drm:intel_hdmi_detect] [CONNECTOR:108:HDMI-A-1]
>Waiting for root device PARTUUID=4e87d3c0-f082-4948-8aca-0319ae0ac13d...
>[drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[drm:intel_hdmi_set_edid] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
>[drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus dpc. force bit now 1
>[drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus dpc. force bit now 0
>[drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[drm:drm_dp_dual_mode_detect] DP dual mode HDMI ID:  (err -6)
>[drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:HDMI-A-1] disconnected
>[drm:drm_setup_crtcs] connector 101 enabled? yes
>[drm:drm_setup_crtcs] connector 108 enabled? no
>[drm:intel_fb_initial_config] Not using firmware configuration
>[drm:drm_setup_crtcs] looking for cmdline mode on connector 101
>[drm:drm_setup_crtcs] looking for preferred mode on connector 101 0
>[drm:drm_setup_crtcs] found mode 1920x1080
>[drm:drm_setup_crtcs] picking CRTCs for 1920x1080 config
>[drm:drm_mode_object_put] OBJ ID: 101 (4)
>[drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 51 (0,0)
>[drm:drm_mode_object_get] OBJ ID: 101 (3)
>[drm:drm_mode_object_get] OBJ ID: 114 (2)
>[drm:drm_mode_object_get] OBJ ID: 116 (1)
>[drm:drm_mode_object_put] OBJ ID: 116 (2)
>[drm:drm_mode_object_get] OBJ ID: 114 (3)
>[drm:drm_mode_object_put] OBJ ID: 114 (4)
>[drm:drm_mode_object_get] OBJ ID: 101 (5)
>[drm:drm_mode_object_get] OBJ ID: 101 (6)
>[drm:drm_mode_object_put] OBJ ID: 101 (6)
>[drm:drm_mode_object_get] OBJ ID: 101 (5)
>[drm:drm_vblank_enable] enabling vblank on crtc 0, ret: 0
>[drm:drm_handle_vblank] vblank event on 18, current 18
>[drm:drm_sysfs_hotplug_event] generating hotplug event
>[drm:drm_fb_helper_hotplug_event] 
>[drm:drm_setup_crtcs] 
>[drm:drm_helper_probe_single_connector_modes] [CONNECTOR:101:eDP-1]
>[drm:intel_dp_detect] [CONNECTOR:101:eDP-1]
>[drm:intel_dp_print_rates] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000
>[drm:intel_dp_print_rates] sink rates: 162000, 270000
>[drm:intel_dp_print_rates] common rates: 162000, 270000
>[drm:drm_mode_object_put] OBJ ID: 101 (6)
>[drm:drm_mode_object_put] OBJ ID: 101 (5)
>[drm:drm_mode_object_put] OBJ ID: 116 (1)
>[drm:drm_mode_object_put] OBJ ID: 114 (3)
>[drm:drm_dp_read_desc] DP sink: OUI 00-00-00 dev-ID  HW-rev 0.0 SW-rev 0.0 quirks 0x0000
>[drm:drm_add_display_info] non_desktop set to 0
>[drm:drm_add_display_info] eDP-1: Assigning EDID-1.4 digital sink color depth as 8 bpc.
>[drm:drm_mode_object_put] OBJ ID: 113 (1)
>[drm:drm_add_edid_modes.part.29] ELD: no CEA Extension found
>[drm:drm_add_display_info] non_desktop set to 0
>[drm:drm_add_display_info] eDP-1: Assigning EDID-1.4 digital sink color depth as 8 bpc.
>[drm:drm_helper_probe_single_connector_modes] [CONNECTOR:101:eDP-1] probed modes :
>[drm:drm_mode_debug_printmodeline] Modeline 102:"1920x1080" 60 152840 1920 2000 2060 2250 1080 1086 1094 1132 0x48 0xa
>[drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:HDMI-A-1]
>[drm:intel_hdmi_detect] [CONNECTOR:108:HDMI-A-1]
>[drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[drm:intel_hdmi_set_edid] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
>[drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus dpc. force bit now 1
>[drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus dpc. force bit now 0
>[drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[drm:drm_dp_dual_mode_detect] DP dual mode HDMI ID:  (err -6)
>[drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:HDMI-A-1] disconnected
>[drm:drm_setup_crtcs] connector 101 enabled? yes
>[drm:drm_setup_crtcs] connector 108 enabled? no
>[drm:intel_fb_initial_config] Not using firmware configuration
>[drm:drm_setup_crtcs] looking for cmdline mode on connector 101
>[drm:drm_setup_crtcs] looking for preferred mode on connector 101 0
>[drm:drm_setup_crtcs] found mode 1920x1080
>[drm:drm_setup_crtcs] picking CRTCs for 1920x1080 config
>[drm:drm_mode_object_put] OBJ ID: 101 (4)
>[drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 51 (0,0)
>[drm:drm_mode_object_get] OBJ ID: 101 (3)
>[drm:drm_mode_object_get] OBJ ID: 114 (2)
>[drm:drm_mode_object_get] OBJ ID: 115 (1)
>[drm:drm_mode_object_put] OBJ ID: 115 (2)
>[drm:drm_mode_object_get] OBJ ID: 114 (3)
>[drm:drm_mode_object_put] OBJ ID: 114 (4)
>[drm:drm_mode_object_get] OBJ ID: 101 (5)
>[drm:drm_mode_object_get] OBJ ID: 101 (6)
>[drm:drm_mode_object_put] OBJ ID: 101 (6)
>[drm:drm_mode_object_get] OBJ ID: 101 (5)
>[drm:drm_handle_vblank] vblank event on 19, current 19
>[drm:drm_mode_object_put] OBJ ID: 101 (6)
>[drm:drm_mode_object_put] OBJ ID: 101 (5)
>[drm:drm_mode_object_put] OBJ ID: 115 (1)
>[drm:drm_mode_object_put] OBJ ID: 114 (3)
>[drm:vblank_disable_fn] disabling vblank on crtc 0
>usb 1-7: New USB device found, idVendor=1bcf, idProduct=2cb0, bcdDevice= 0.04
>usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 1-7: Product: HD User Facing
>usb 1-7: Manufacturer: KS0HD0501382204406LM04
>usb 1-9: new full-speed USB device number 6 using xhci_hcd
>usb 1-9: New USB device found, idVendor=8087, idProduct=0aaa, bcdDevice= 0.02
>usb 1-9: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>scsi 2:0:0:0: Direct-Access     Kingston DataTraveler G2  1.00 PQ: 0 ANSI: 2
>sd 2:0:0:0: [sdc] 31367168 512-byte logical blocks: (16.1 GB/15.0 GiB)
>sd 2:0:0:0: [sdc] Write Protect is off
>sd 2:0:0:0: [sdc] Mode Sense: 23 00 00 00
>sd 2:0:0:0: [sdc] No Caching mode page found
>sd 2:0:0:0: [sdc] Assuming drive cache: write through
> sdc: sdc1 sdc2 sdc3
>sd 2:0:0:0: [sdc] Attached SCSI removable disk
>EXT4-fs (sdc3): mounted filesystem with ordered data mode. Opts: (null)
>VFS: Mounted root (ext4 filesystem) readonly on device 8:35.
>devtmpfs: mounted
>Freeing unused kernel image memory: 1516K
>Write protecting the kernel read-only data: 22528k
>Freeing unused kernel image memory: 2000K
>Freeing unused kernel image memory: 1368K
>Run /sbin/init as init process
>ahci 0000:00:12.0: port does not support device sleep
>EXT4-fs (sdc3): re-mounted. Opts: user_xattr
>udevd[185]: starting version 3.2.5
>random: udevd: uninitialized urandom read (16 bytes read)
>random: udevd: uninitialized urandom read (16 bytes read)
>random: udevd: uninitialized urandom read (16 bytes read)
>udevd[185]: specified group 'render' unknown
>udevd[185]: specified group 'kvm' unknown
>udevd[185]: starting eudev-3.2.5
>[drm:edp_panel_vdd_off_sync] Turning eDP port A VDD off
>[drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067
>[drm:intel_power_well_disable] disabling DC off
>[drm:gen9_enable_dc5] Enabling DC5
>[drm:gen9_set_dc_state] Setting DC state from 00 to 01
>random: crng init done
>random: 2 urandom warning(s) missed due to ratelimiting
>[drm:drm_mode_object_get] OBJ ID: 114 (2)
>[drm:drm_mode_object_get] OBJ ID: 113 (1)
>[drm:drm_mode_object_put] OBJ ID: 113 (2)
>[drm:drm_mode_object_get] OBJ ID: 114 (3)
>[drm:drm_mode_object_put] OBJ ID: 114 (4)
>[drm:drm_mode_object_get] OBJ ID: 101 (5)
>[drm:drm_mode_object_get] OBJ ID: 101 (6)
>[drm:drm_mode_object_put] OBJ ID: 101 (6)
>[drm:drm_mode_object_get] OBJ ID: 101 (5)
>[drm:drm_vblank_enable] enabling vblank on crtc 0, ret: 0
>[drm:drm_handle_vblank] vblank event on 992, current 992
>[drm:drm_mode_object_put] OBJ ID: 101 (6)
>[drm:drm_mode_object_put] OBJ ID: 101 (5)
>[drm:drm_mode_object_put] OBJ ID: 113 (1)
>[drm:drm_mode_object_put] OBJ ID: 114 (3)
>[drm:vblank_disable_fn] disabling vblank on crtc 0
>[drm:drm_mode_object_get] OBJ ID: 114 (2)
>[drm:drm_mode_object_get] OBJ ID: 115 (1)
>[drm:drm_mode_object_put] OBJ ID: 115 (2)
>[drm:drm_mode_object_get] OBJ ID: 114 (3)
>[drm:drm_mode_object_put] OBJ ID: 114 (4)
>[drm:drm_mode_object_get] OBJ ID: 101 (5)
>[drm:drm_mode_object_get] OBJ ID: 101 (6)
>[drm:drm_mode_object_put] OBJ ID: 101 (6)
>[drm:drm_mode_object_get] OBJ ID: 101 (5)
>[drm:drm_vblank_enable] enabling vblank on crtc 0, ret: 0
>[drm:drm_handle_vblank] vblank event on 1029, current 1029
>[drm:drm_mode_object_put] OBJ ID: 101 (6)
>[drm:drm_mode_object_put] OBJ ID: 101 (5)
>[drm:drm_mode_object_put] OBJ ID: 115 (1)
>[drm:drm_mode_object_put] OBJ ID: 114 (3)
>[drm:vblank_disable_fn] disabling vblank on crtc 0
>[drm:drm_mode_object_get] OBJ ID: 114 (2)
>[drm:drm_mode_object_get] OBJ ID: 113 (1)
>[drm:drm_mode_object_put] OBJ ID: 113 (2)
>[drm:drm_mode_object_get] OBJ ID: 114 (3)
>[drm:drm_mode_object_put] OBJ ID: 114 (4)
>[drm:drm_mode_object_get] OBJ ID: 101 (5)
>[drm:drm_mode_object_get] OBJ ID: 101 (6)
>[drm:drm_mode_object_put] OBJ ID: 101 (6)
>[drm:drm_mode_object_get] OBJ ID: 101 (5)
>[drm:drm_vblank_enable] enabling vblank on crtc 0, ret: 0
>[drm:drm_handle_vblank] vblank event on 9386, current 9386
>[drm:vblank_disable_fn] disabling vblank on crtc 0
>[drm:drm_mode_object_put] OBJ ID: 101 (6)
>[drm:drm_mode_object_put] OBJ ID: 101 (5)
>[drm:drm_mode_object_put] OBJ ID: 113 (1)
>[drm:drm_mode_object_put] OBJ ID: 114 (3)
>[drm:drm_mode_object_get] OBJ ID: 114 (2)
>[drm:drm_mode_object_get] OBJ ID: 115 (1)
>[drm:drm_mode_object_put] OBJ ID: 115 (2)
>[drm:drm_mode_object_get] OBJ ID: 114 (3)
>[drm:drm_mode_object_put] OBJ ID: 114 (4)
>[drm:drm_mode_object_get] OBJ ID: 101 (5)
>[drm:drm_mode_object_get] OBJ ID: 101 (6)
>[drm:drm_mode_object_put] OBJ ID: 101 (6)
>[drm:drm_mode_object_get] OBJ ID: 101 (5)
>[drm:drm_vblank_enable] enabling vblank on crtc 0, ret: 0
>[drm:drm_handle_vblank] vblank event on 9402, current 9402
>[drm:drm_mode_object_put] OBJ ID: 101 (6)
>[drm:drm_mode_object_put] OBJ ID: 101 (5)
>[drm:drm_mode_object_put] OBJ ID: 115 (1)
>[drm:drm_mode_object_put] OBJ ID: 114 (3)
>[drm:vblank_disable_fn] disabling vblank on crtc 0

Actions: View

Attachments on bug 108103: 141979 | 142787 | 142788 | 142789 | 142841

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.