Attachment 142272 Details for Bug 108529 – BIOS(VBT) information from failed machine.

BIOS(VBT) information from failed machine.

fi-apl-guc.txt (text/plain), 9.00 KB, created by Lakshmi on 2018-10-30 07:20:26 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Lakshmi

Created: 2018-10-30 07:20:26 UTC

Size: 9.00 KB

patch

obsolete

>-- fi-apl-guc
>
>VBT header:
>	VBT signature:		"$VBT BROXTON        "
>	VBT version:		0x0064 (1.0)
>	VBT header size:	0x0030 (48)
>	VBT size:		0x180a (6154)
>	VBT checksum:		0x95
>	BDB offset:		0x00000030 (48)
>
>BDB header:
>	BDB signature:		"BIOS_DATA_BLOCK "
>	BDB version:		207
>	BDB header size:	0x0016 (22)
>	BDB size:		0x17d9 (6105)
>
>BDB blocks present:
>	  1   2   3   6   7   8   9  10  12  13  17  18  20  26  27  28
>	 31  32  40  41  42  43  44  46  51  52  54 252 253 254
>
>BDB block 1 - General features block:
>	Panel fitting: text & graphics
>	Flexaim: yes
>	Message: yes
>	Clear screen: 0
>	DVO color flip required: no
>	External VBT: no
>	Enable SSC: no
>	LFP on override: no
>	Disable SSC on clone: no
>	Underscan support for VGA timings: no
>	Dynamic CD clock: yes
>	Hotplug support in VBIOS: no
>	Disable smooth vision: no
>	Single DVI for CRT/DVI: no
>	Enable 180 degree rotation: no
>	Inverted FDI Rx polarity: no
>	Extended VBIOS mode: no
>	Copy iLFP DTD to SDVO LVDS DTD: no
>	Best fit panel timing algorithm: no
>	Ignore strap state: no
>	Legacy monitor detect: yes
>	Integrated CRT: no
>	Integrated TV: no
>	Integrated EFP: no
>	DP SSC enable: no
>	DP SSC dongle supported: no
>
>BDB block 2 - General definitions block:
>	CRT DDC GMBUS addr: 0x02
>	Use ACPI DPMS CRT power states: no
>	Skip CRT detect at boot: no
>	Use DPMS on AIM devices: yes
>	Boot display type: 0x0000
>	Child device size: 38
>	Child device count: 8
>	Child device info:
>		Device handle: 0x0004 (EFP 1 (HDMI/DVI/DP))
>		Device type: 0x60d6 (DisplayPort/HDMI/DVI)
>			Power management
>			Hotplug signaling
>			HDMI output
>			Content protection
>			High speed link
>			TMDS/DVI signaling
>			DisplayPort output
>			Digital output
>		I2C speed: 0x00
>		DP onboard redriver: 0x10
>		DP ondock redriver: 0x10
>		HDMI level shifter value: 0x00
>		HDMI max data rate: 0x00
>		Offset to DTD buffer for edidless CHILD: 0x8ea
>		Edidless EFP: no
>		Compression enable: no
>		Compression method CPS: no
>		Dual pipe ganged eDP: no
>		Compression structure index: 0x00)
>		Slave DDI port: 0x20 (unknown)
>		AIM offset: 0
>		DVO Port: 0x07 (DP-B)
>		AIM I2C pin: 0x00
>		AIM Slave address: 0x00
>		DDC pin: 0x01
>		EDID buffer ptr: 0x00
>		DVO config: 0x00
>		EFP routed through dock: no
>		Lane reversal: no
>		Onboard LSPCON: yes
>		Iboost enable: no
>		HPD sense invert: yes
>		HDMI compatible? no
>		DP compatible? no
>		TMDS compatible? no
>		Aux channel: 0x10
>		Dongle detect: 0x01
>		Pipe capabilities: 0x00
>		SDVO stall signal available: no
>		Hotplug connect status: 0x00
>		Integrated encoder instead of SDVO: yes
>		DVO wiring: 0x01
>		MIPI bridge type: 00 (unknown)
>		Device class extension: 0x00
>		DVO function: 0x00
>		DP USB type C support: no
>		2X DP GPIO index: 0x00
>		2X DP GPIO pin number: 0x00
>		IBoost level for HDMI: 0x00
>		IBoost level for DP/eDP: 0x00
>	Child device info:
>		Device handle: 0x0040 (EFP 2 (HDMI/DVI/DP))
>		Device type: 0x68c6 (DisplayPort)
>			Power management
>			Hotplug signaling
>			Content protection
>			High speed link
>			DisplayPort output
>			Digital output
>		I2C speed: 0x00
>		DP onboard redriver: 0x10
>		DP ondock redriver: 0x10
>		HDMI level shifter value: 0x00
>		HDMI max data rate: 0x00
>		Offset to DTD buffer for edidless CHILD: 0x8fc
>		Edidless EFP: no
>		Compression enable: no
>		Compression method CPS: no
>		Dual pipe ganged eDP: no
>		Compression structure index: 0x00)
>		Slave DDI port: 0x20 (unknown)
>		AIM offset: 0
>		DVO Port: 0x08 (DP-C)
>		AIM I2C pin: 0x00
>		AIM Slave address: 0x00
>		DDC pin: 0x02
>		EDID buffer ptr: 0x00
>		DVO config: 0x00
>		EFP routed through dock: no
>		Lane reversal: no
>		Onboard LSPCON: no
>		Iboost enable: no
>		HPD sense invert: yes
>		HDMI compatible? no
>		DP compatible? no
>		TMDS compatible? no
>		Aux channel: 0x20
>		Dongle detect: 0x01
>		Pipe capabilities: 0x00
>		SDVO stall signal available: no
>		Hotplug connect status: 0x00
>		Integrated encoder instead of SDVO: yes
>		DVO wiring: 0x01
>		MIPI bridge type: 00 (unknown)
>		Device class extension: 0x00
>		DVO function: 0x00
>		DP USB type C support: no
>		2X DP GPIO index: 0x00
>		2X DP GPIO pin number: 0x00
>		IBoost level for HDMI: 0x00
>		IBoost level for DP/eDP: 0x00
>
>BDB block 3 - Unknown, no decoding available:
>
>BDB block 6 - Unknown, no decoding available:
>
>BDB block 7 - Unknown, no decoding available:
>
>BDB block 8 - Unknown, no decoding available:
>
>BDB block 9 - PSR block:
>	Panel 0 *
>		Full link: no
>		Require AUX to wakeup: no
>		Lines to wait before link standby: 0
>		Idle frames to for PSR enable: 0
>		TP1 wakeup time: 200 usec (0x2)
>		TP2/TP3 wakeup time: 200 usec (0x2)
>
>BDB block 10 - Unknown, no decoding available:
>
>BDB block 12 - Driver feature data block:
>	Boot Device Algorithm: os default
>	Block display switching when DVD active: yes
>	Allow display switching when in Full Screen DOS: no
>	Hot Plug DVO: yes
>	Dual View Zoom: no
>	Driver INT 15h hook: no
>	Enable Sprite in Clone Mode: yes
>	Use 00000110h ID for Primary LFP: no
>	Boot Mode X: 1024
>	Boot Mode Y: 768
>	Boot Mode Bpp: 8
>	Boot Mode Refresh: 60
>	Enable LFP as primary: no
>	Selective Mode Pruning: no
>	Dual-Frequency Graphics Technology: yes
>	Default Render Clock Frequency: high
>	NT 4.0 Dual Display Clone Support: no
>	Default Power Scheme user interface: CUI
>	Sprite Display Assignment when Overlay is Active in Clone Mode: secondary
>	Display Maintain Aspect Scaling via CUI: yes
>	Preserve Aspect Ratio: no
>	Enable SDVO device power down: no
>	CRT hotplug: yes
>	LVDS config: Embedded DisplayPort
>	Define Display statically: no
>	Legacy CRT max X: 0
>	Legacy CRT max Y: 0
>	Legacy CRT max refresh: 85
>	Enable DRRS: yes
>	Enable PSR: yes
>
>BDB block 13 - Unknown, no decoding available:
>
>BDB block 17 - Unknown, no decoding available:
>
>BDB block 18 - Unknown, no decoding available:
>
>BDB block 20 - Unknown, no decoding available:
>
>BDB block 26 - Unknown, no decoding available:
>
>BDB block 27 - eDP block:
>	Panel 0 *
>		Power Sequence: T3 2000 T7 10 T9 2000 T10 500 T12 5000
>		Panel color depth: 18 bpp
>		eDP sDRRS MSA Delay: Lane 1
>		Fast link params:
>			rate: 1.62G
>			lanes: x1 mode
>			pre-emphasis: none
>			vswing: 0.4V
>		Stereo 3D feature: no
>		T3 optimization: yes
>		Vswing/preemphasis table selection: Default (400 mV)
>		Fast link training: no
>		DPCD 600h write required: no
>		PWM delays:
>			PWM on to backlight enable: 0
>			Backlight disable to PWM off: 0
>		Full link params provided: no
>		Full link params:
>			pre-emphasis: none
>			vswing: 0.4V
>
>BDB block 28 - Unknown, no decoding available:
>
>BDB block 31 - Unknown, no decoding available:
>
>BDB block 32 - Unknown, no decoding available:
>
>BDB block 40 - LVDS options block:
>	Panel type: 0
>	LVDS EDID available: no
>	Pixel dither: yes
>	PFIT auto ratio: yes
>	PFIT enhanced graphics mode: no
>	PFIT enhanced text mode: no
>	PFIT mode: 3
>
>BDB block 41 - LVDS timing pointer data:
>	Number of entries: 3
>
>BDB block 42 - LVDS panel data block:
>   Number of entries: 19 (preferred block marked with '*')
>*	panel type 00: 640x480 clock 148350000
>		info:
>		  LVDS: 0x00000300
>		  PP_ON_DELAYS: 0x025807d0
>		  PP_OFF_DELAYS: 0x01f407d0
>		  PP_DIVISOR: 0x00270f05
>		  PFIT: 0xb0707880
>		timings: 1920 1960 2000 2040 1200 1204 1208 1212 148350.00 (good)
>
>BDB block 43 - Backlight info block:
>	Inverter type: 2
>	     polarity: 0
>	     PWM freq: 200
>	Minimum brightness: 0
>
>BDB block 44 - Unknown, no decoding available:
>
>BDB block 46 - Unknown, no decoding available:
>
>BDB block 51 - Unknown, no decoding available:
>
>BDB block 52 - MIPI configuration block:
>	General Param
>		 BTA disable: Enabled
>		 Panel Rotation: 0 degrees
>		 Video Mode Color Format: RGB888
>		 PPS GPIO Pins: Using PMIC
>		 CABC Support: not supported
>		 Mode: VIDEO
>		 Video transfer mode: non-burst with sync events (0x2)
>		 Dithering: done in Panel Controller
>	Port Desc
>		 Pixel overlap: 0
>		 Lane Count: 4
>		 Dual Link Support: not supported
>	Dphy Flags
>		 Clock Stop: DISABLED
>		 EOT disabled: EOT to be sent
>
>	HSTxTimeOut: 0x3fffff
>	LPRXTimeOut: 0xffff
>	TurnAroundTimeOut: 0x14
>	DeviceResetTimer: 0xff
>	MasterinitTimer: 0x7d0
>	DBIBandwidthTimer: 0x0
>	LpByteClkValue: 0x4
>
>	Dphy Params
>		Exit to zero Count: 0x3f
>		Trail Count: 0x1F
>		Clk zero count: 0x7f
>		Prepare count:0xf
>
>	ClockLaneSwitchingCount: 0xa0014
>	HighToLowSwitchingCount: 0x46
>
>	Timings based on Dphy spec
>		TClkMiss: 0x3c
>		TClkPost: 0x3c
>		TClkPre: 0x8
>		TClkPrepare: 0x32
>		TClkSettle: 0x69
>		TClkTermEnable: 0x26
>
>	TClkTrail: 0x46
>	TClkPrepareTClkZero: 0x136
>	THSExit: 0x6e
>	THsPrepare: 0x32
>	THsPrepareTHsZero: 0xc8
>	THSSettle: 0x5f
>	THSSkip: 0x28
>	THsTrail: 0x3c
>	TInit: 0x0
>	TLPX: 0x32
>	MIPI PPS
>		Panel power ON delay: 500
>		Panel power on to Backlight enable delay: 500
>		Backlight disable to Panel power OFF delay: 500
>		Panel power OFF delay: 500
>		Panel power cycle delay: 5000
>
>BDB block 54 - Unknown, no decoding available:
>
>BDB block 252 - Unknown, no decoding available:
>
>BDB block 253 - Unknown, no decoding available:
>
>BDB block 254 - Unknown, no decoding available:

Actions: View

Attachments on bug 108529: 142272 | 142273

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.