Attachment 33446 Details for Bug 23234 – dmesg output

dmesg output

dmesg (text/plain), 34.26 KB, created by gwydion on 2010-02-20 06:31:06 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: gwydion

Created: 2010-02-20 06:31:06 UTC

Size: 34.26 KB

patch

obsolete

>Linux version 2.6.32-39288-g45fa67f-dirty (root@totmacher) (gcc version 4.4.3 (GCC) ) #1 SMP PREEMPT Sat Feb 20 01:07:42 CET 2010
>Command line: root=/dev/disk/by-uuid/0ac7340b-c1ad-4c6b-9d9f-c73e65e3f10f ro
>KERNEL supported cpus:
>  Intel GenuineIntel
>  AMD AuthenticAMD
>  Centaur CentaurHauls
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 0000000000098400 (usable)
> BIOS-e820: 0000000000098400 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000cfd81000 (usable)
> BIOS-e820: 00000000cfde0000 - 00000000cfde3000 (ACPI NVS)
> BIOS-e820: 00000000cfde3000 - 00000000cfdf0000 (ACPI data)
> BIOS-e820: 00000000cfdf0000 - 00000000cfe00000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
> BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
>DMI 2.4 present.
>last_pfn = 0x130000 max_arch_pfn = 0x400000000
>MTRR default type: uncachable
>MTRR fixed ranges enabled:
>  00000-9FFFF write-back
>  A0000-BFFFF uncachable
>  C0000-C7FFF write-protect
>  C8000-FFFFF uncachable
>MTRR variable ranges enabled:
>  0 base 000000000000 mask FFFF80000000 write-back
>  1 base 000080000000 mask FFFFC0000000 write-back
>  2 base 0000C0000000 mask FFFFF0000000 write-back
>  3 base 0000CFE00000 mask FFFFFFE00000 uncachable
>  4 base 000100000000 mask FFFFE0000000 write-back
>  5 base 000120000000 mask FFFFF0000000 write-back
>  6 disabled
>  7 disabled
>TOM2: 0000000130000000 aka 4864M
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>e820 update range: 00000000cfe00000 - 0000000100000000 (usable) ==> (reserved)
>last_pfn = 0xcfd81 max_arch_pfn = 0x400000000
>e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved)
>Scanning 1 areas for low memory corruption
>modified physical RAM map:
> modified: 0000000000000000 - 0000000000001000 (usable)
> modified: 0000000000001000 - 0000000000006000 (reserved)
> modified: 0000000000006000 - 0000000000098400 (usable)
> modified: 0000000000098400 - 00000000000a0000 (reserved)
> modified: 00000000000f0000 - 0000000000100000 (reserved)
> modified: 0000000000100000 - 00000000cfd81000 (usable)
> modified: 00000000cfde0000 - 00000000cfde3000 (ACPI NVS)
> modified: 00000000cfde3000 - 00000000cfdf0000 (ACPI data)
> modified: 00000000cfdf0000 - 00000000cfe00000 (reserved)
> modified: 00000000e0000000 - 00000000f0000000 (reserved)
> modified: 00000000fec00000 - 0000000100000000 (reserved)
> modified: 0000000100000000 - 0000000130000000 (usable)
>initial memory mapped : 0 - 20000000
>Using GB pages for direct mapping
>init_memory_mapping: 0000000000000000-00000000cfd81000
> 0000000000 - 00c0000000 page 1G
> 00c0000000 - 00cfc00000 page 2M
> 00cfc00000 - 00cfd81000 page 4k
>kernel direct mapping tables up to cfd81000 @ 8000-b000
>init_memory_mapping: 0000000100000000-0000000130000000
> 0100000000 - 0130000000 page 2M
>kernel direct mapping tables up to 130000000 @ a000-c000
>RAMDISK: 37e30000 - 37fef8f8
>ACPI: RSDP 00000000000f5fb0 00014 (v00 GBT   )
>ACPI: RSDT 00000000cfde3000 00038 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
>ACPI: FACP 00000000cfde3040 00074 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
>ACPI: DSDT 00000000cfde30c0 06E92 (v01 GBT    GBTUACPI 00001000 MSFT 03000000)
>ACPI: FACS 00000000cfde0000 00040
>ACPI: HPET 00000000cfdea040 00038 (v01 GBT    GBTUACPI 42302E31 GBTU 00000098)
>ACPI: MCFG 00000000cfdea080 0003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
>ACPI: TAMG 00000000cfdea0c0 0039A (v01 GBT    GBT   B0 5455312E BG?? 53450101)
>ACPI: APIC 00000000cfde9f80 00084 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
>ACPI: Local APIC address 0xfee00000
>(8 early reservations) ==> bootmem [0000000000 - 0130000000]
>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
>  #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
>  #2 [0001000000 - 0001697718]    TEXT DATA BSS ==> [0001000000 - 0001697718]
>  #3 [0037e30000 - 0037fef8f8]          RAMDISK ==> [0037e30000 - 0037fef8f8]
>  #4 [0000098400 - 0000100000]    BIOS reserved ==> [0000098400 - 0000100000]
>  #5 [0001698000 - 00016980fe]              BRK ==> [0001698000 - 00016980fe]
>  #6 [0000008000 - 000000a000]          PGTABLE ==> [0000008000 - 000000a000]
>  #7 [000000a000 - 000000b000]          PGTABLE ==> [000000a000 - 000000b000]
>found SMP MP-table at [ffff8800000f45a0] f45a0
> [ffffea0000000000-ffffea00043fffff] PMD -> [ffff880001800000-ffff8800051fffff] on node 0
>Zone PFN ranges:
>  DMA      0x00000000 -> 0x00001000
>  DMA32    0x00001000 -> 0x00100000
>  Normal   0x00100000 -> 0x00130000
>Movable zone start PFN for each node
>early_node_map[4] active PFN ranges
>    0: 0x00000000 -> 0x00000001
>    0: 0x00000006 -> 0x00000098
>    0: 0x00000100 -> 0x000cfd81
>    0: 0x00100000 -> 0x00130000
>On node 0 totalpages: 1047828
>  DMA zone: 56 pages used for memmap
>  DMA zone: 109 pages reserved
>  DMA zone: 3822 pages, LIFO batch:0
>  DMA32 zone: 14280 pages used for memmap
>  DMA32 zone: 832953 pages, LIFO batch:31
>  Normal zone: 2688 pages used for memmap
>  Normal zone: 193920 pages, LIFO batch:31
>ACPI: PM-Timer IO Port: 0x4008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Using ACPI (MADT) for SMP configuration information
>ACPI: HPET id: 0x10b9a201 base: 0xfed00000
>SMP: Allowing 4 CPUs, 0 hotplug CPUs
>nr_irqs_gsi: 24
>PM: Registered nosave memory: 0000000000001000 - 0000000000006000
>PM: Registered nosave memory: 0000000000098000 - 0000000000099000
>PM: Registered nosave memory: 0000000000099000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
>PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
>PM: Registered nosave memory: 00000000cfd81000 - 00000000cfde0000
>PM: Registered nosave memory: 00000000cfde0000 - 00000000cfde3000
>PM: Registered nosave memory: 00000000cfde3000 - 00000000cfdf0000
>PM: Registered nosave memory: 00000000cfdf0000 - 00000000cfe00000
>PM: Registered nosave memory: 00000000cfe00000 - 00000000e0000000
>PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
>PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
>PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
>Allocating PCI resources starting at cfe00000 (gap: cfe00000:10200000)
>Booting paravirtualized kernel on bare hardware
>NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:4 nr_node_ids:1
>PERCPU: Embedded 29 pages/cpu @ffff880005400000 s88920 r8192 d21672 u524288
>pcpu-alloc: s88920 r8192 d21672 u524288 alloc=1*2097152
>pcpu-alloc: [0] 0 1 2 3 
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1030695
>Kernel command line: root=/dev/disk/by-uuid/0ac7340b-c1ad-4c6b-9d9f-c73e65e3f10f ro
>PID hash table entries: 4096 (order: 3, 32768 bytes)
>Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
>Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Initializing CPU#0
>Checking aperture...
>No AGP bridge found
>Node 0: aperture @ 9020000000 size 32 MB
>Aperture beyond 4GB. Ignoring.
>Your BIOS doesn't leave a aperture memory hole
>Please enable the IOMMU option in the BIOS setup
>This costs you 64 MB of RAM
>Mapping aperture over 65536 KB of RAM @ 20000000
>PM: Registered nosave memory: 0000000020000000 - 0000000024000000
>Memory: 4049920k/4980736k available (3288k kernel code, 789424k absent, 140484k reserved, 1743k data, 484k init)
>SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
>Hierarchical RCU implementation.
>NR_IRQS:768
>Console: colour VGA+ 80x25
>console [tty0] enabled
>hpet clockevent registered
>HPET: 4 timers in total, 1 timers will be used for per-cpu timer
>Fast TSC calibration using PIT
>Detected 3415.258 MHz processor.
>Calibrating delay loop (skipped), value calculated using timer frequency.. 6833.11 BogoMIPS (lpj=11384176)
>Security Framework initialized
>Mount-cache hash table entries: 256
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>tseg: 00cfe00000
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>mce: CPU supports 6 MCE banks
>using C1E aware idle routine
>Performance Events: AMD PMU driver.
>... version:                0
>... bit width:              48
>... generic registers:      4
>... value mask:             0000ffffffffffff
>... max period:             00007fffffffffff
>... fixed-purpose events:   0
>... event mask:             000000000000000f
>ACPI: Core revision 20090903
>Setting APIC routing to flat
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>CPU0: AMD Phenom(tm) II X4 955 Processor stepping 02
>Booting processor 1 APIC 0x1 ip 0x6000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 6832.84 BogoMIPS (lpj=11383758)
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU1: AMD Phenom(tm) II X4 955 Processor stepping 02
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Booting processor 2 APIC 0x2 ip 0x6000
>Initializing CPU#2
>Calibrating delay using timer specific routine.. 6832.84 BogoMIPS (lpj=11383756)
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 3
>CPU2: AMD Phenom(tm) II X4 955 Processor stepping 02
>checking TSC synchronization [CPU#0 -> CPU#2]: passed.
>Booting processor 3 APIC 0x3 ip 0x6000
>Initializing CPU#3
>Calibrating delay using timer specific routine.. 6832.84 BogoMIPS (lpj=11383755)
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 2
>CPU3: AMD Phenom(tm) II X4 955 Processor stepping 02
>checking TSC synchronization [CPU#0 -> CPU#3]: passed.
>Brought up 4 CPUs
>Total of 4 processors activated (27332.65 BogoMIPS).
>CPU0 attaching sched-domain:
> domain 0: span 0-3 level MC
>  groups: 0 1 2 3
>CPU1 attaching sched-domain:
> domain 0: span 0-3 level MC
>  groups: 1 2 3 0
>CPU2 attaching sched-domain:
> domain 0: span 0-3 level MC
>  groups: 2 3 0 1
>CPU3 attaching sched-domain:
> domain 0: span 0-3 level MC
>  groups: 3 0 1 2
>NET: Registered protocol family 16
>node 0 link 0: io port [c000, ffff]
>TOM: 00000000d0000000 aka 3328M
>Fam 10h mmconf [e0000000, e00fffff]
>node 0 link 0: mmio [a0000, bffff]
>node 0 link 0: mmio [d0000000, dfffffff]
>node 0 link 0: mmio [f0000000, fe02ffff]
>node 0 link 0: mmio [e0000000, e03fffff] ==> [e0100000, e03fffff]
>TOM2: 0000000130000000 aka 4864M
>bus: [00,03] on node 0 link 0
>bus: 00 index 0 io port: [0, ffff]
>bus: 00 index 1 mmio: [a0000, bffff]
>bus: 00 index 2 mmio: [d0000000, dfffffff]
>bus: 00 index 3 mmio: [e0400000, ffffffff]
>bus: 00 index 4 mmio: [e0100000, e03fffff]
>bus: 00 index 5 mmio: [130000000, fcffffffff]
>ACPI: bus type pci registered
>PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
>PCI: MCFG area at e0000000 reserved in E820
>PCI: Using MMCONFIG at e0000000 - efffffff
>PCI: Using configuration type 1 for base access
>bio: create slab <bio-0> at 0
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: No dock devices found.
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci 0000:00:00.0: reg 1c 64bit mmio: [0xe0000000-0xffffffff]
>pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:03.0: PME# disabled
>pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:0a.0: PME# disabled
>pci 0000:00:11.0: reg 10 io port: [0xff00-0xff07]
>pci 0000:00:11.0: reg 14 io port: [0xfe00-0xfe03]
>pci 0000:00:11.0: reg 18 io port: [0xfd00-0xfd07]
>pci 0000:00:11.0: reg 1c io port: [0xfc00-0xfc03]
>pci 0000:00:11.0: reg 20 io port: [0xfb00-0xfb0f]
>pci 0000:00:11.0: reg 24 32bit mmio: [0xfe02f000-0xfe02f3ff]
>pci 0000:00:12.0: reg 10 32bit mmio: [0xfe02e000-0xfe02efff]
>pci 0000:00:12.1: reg 10 32bit mmio: [0xfe02d000-0xfe02dfff]
>pci 0000:00:12.2: reg 10 32bit mmio: [0xfe02c000-0xfe02c0ff]
>pci 0000:00:12.2: supports D1 D2
>pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
>pci 0000:00:12.2: PME# disabled
>pci 0000:00:13.0: reg 10 32bit mmio: [0xfe02b000-0xfe02bfff]
>pci 0000:00:13.1: reg 10 32bit mmio: [0xfe02a000-0xfe02afff]
>pci 0000:00:13.2: reg 10 32bit mmio: [0xfe029000-0xfe0290ff]
>pci 0000:00:13.2: supports D1 D2
>pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
>pci 0000:00:13.2: PME# disabled
>pci 0000:00:14.1: reg 10 io port: [0x00-0x07]
>pci 0000:00:14.1: reg 14 io port: [0x00-0x03]
>pci 0000:00:14.1: reg 18 io port: [0x00-0x07]
>pci 0000:00:14.1: reg 1c io port: [0x00-0x03]
>pci 0000:00:14.1: reg 20 io port: [0xfa00-0xfa0f]
>pci 0000:00:14.2: reg 10 64bit mmio: [0xfe024000-0xfe027fff]
>pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
>pci 0000:00:14.2: PME# disabled
>pci 0000:00:14.5: reg 10 32bit mmio: [0xfe028000-0xfe028fff]
>pci 0000:01:00.0: reg 10 64bit mmio pref: [0xd0000000-0xdfffffff]
>pci 0000:01:00.0: reg 18 64bit mmio: [0xfdfc0000-0xfdfdffff]
>pci 0000:01:00.0: reg 20 io port: [0xee00-0xeeff]
>pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
>pci 0000:01:00.0: supports D1 D2
>pci 0000:01:00.1: reg 10 64bit mmio: [0xfdffc000-0xfdffffff]
>pci 0000:01:00.1: supports D1 D2
>pci 0000:00:03.0: bridge io port: [0xe000-0xefff]
>pci 0000:00:03.0: bridge 32bit mmio: [0xfdf00000-0xfdffffff]
>pci 0000:00:03.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
>pci 0000:02:00.0: reg 10 io port: [0xde00-0xdeff]
>pci 0000:02:00.0: reg 18 64bit mmio pref: [0xfdbff000-0xfdbfffff]
>pci 0000:02:00.0: reg 20 64bit mmio pref: [0xfdbf8000-0xfdbfbfff]
>pci 0000:02:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
>pci 0000:02:00.0: supports D1 D2
>pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:02:00.0: PME# disabled
>pci 0000:00:0a.0: bridge io port: [0xd000-0xdfff]
>pci 0000:00:0a.0: bridge 32bit mmio: [0xfde00000-0xfdefffff]
>pci 0000:00:0a.0: bridge 64bit mmio pref: [0xfdb00000-0xfdbfffff]
>pci 0000:00:14.4: transparent bridge
>pci 0000:00:14.4: bridge io port: [0xc000-0xcfff]
>pci 0000:00:14.4: bridge 32bit mmio: [0xfdd00000-0xfddfffff]
>pci 0000:00:14.4: bridge 32bit mmio pref: [0xfdc00000-0xfdcfffff]
>pci_bus 0000:00: on NUMA node 0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE3._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
>vgaarb: loaded
>PCI: Using ACPI for IRQ routing
>pci 0000:00:00.0: BAR 3: address space collision on of device [0xe0000000-0xffffffff]
>pci 0000:00:00.0: BAR 3: can't allocate resource
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>hpet: hpet2 irq 24 for MSI
>Switching to clocksource tsc
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp 00:09: mem resource (0xd4400-0xd7fff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
>pnp 00:09: mem resource (0xf0000-0xf7fff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
>pnp 00:09: mem resource (0xf8000-0xfbfff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
>pnp 00:09: mem resource (0xfc000-0xfffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
>pnp 00:09: mem resource (0x0-0x9ffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
>pnp 00:09: mem resource (0x100000-0xcfddffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
>pnp: PnP ACPI: found 10 devices
>ACPI: ACPI bus type pnp unregistered
>system 00:01: ioport range 0x4d0-0x4d1 has been reserved
>system 00:01: ioport range 0x220-0x225 has been reserved
>system 00:01: ioport range 0x290-0x294 has been reserved
>system 00:02: ioport range 0x4100-0x411f has been reserved
>system 00:02: ioport range 0x228-0x22f has been reserved
>system 00:02: ioport range 0x40b-0x40b has been reserved
>system 00:02: ioport range 0x4d6-0x4d6 has been reserved
>system 00:02: ioport range 0xc00-0xc01 has been reserved
>system 00:02: ioport range 0xc14-0xc14 has been reserved
>system 00:02: ioport range 0xc50-0xc52 has been reserved
>system 00:02: ioport range 0xc6c-0xc6d has been reserved
>system 00:02: ioport range 0xc6f-0xc6f has been reserved
>system 00:02: ioport range 0xcd0-0xcd1 has been reserved
>system 00:02: ioport range 0xcd2-0xcd3 has been reserved
>system 00:02: ioport range 0xcd4-0xcdf has been reserved
>system 00:02: ioport range 0x4000-0x40fe has been reserved
>system 00:02: ioport range 0x4210-0x4217 has been reserved
>system 00:02: ioport range 0xb00-0xb0f has been reserved
>system 00:02: ioport range 0xb10-0xb1f has been reserved
>system 00:02: ioport range 0xb20-0xb3f has been reserved
>system 00:08: iomem range 0xe0000000-0xefffffff has been reserved
>system 00:09: iomem range 0xcfde0000-0xcfdfffff could not be reserved
>system 00:09: iomem range 0xffff0000-0xffffffff has been reserved
>system 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved
>system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved
>system 00:09: iomem range 0xfff80000-0xfffeffff has been reserved
>pci 0000:00:03.0: PCI bridge, secondary bus 0000:01
>pci 0000:00:03.0:   IO window: 0xe000-0xefff
>pci 0000:00:03.0:   MEM window: 0xfdf00000-0xfdffffff
>pci 0000:00:03.0:   PREFETCH window: 0x000000d0000000-0x000000dfffffff
>pci 0000:00:0a.0: PCI bridge, secondary bus 0000:02
>pci 0000:00:0a.0:   IO window: 0xd000-0xdfff
>pci 0000:00:0a.0:   MEM window: 0xfde00000-0xfdefffff
>pci 0000:00:0a.0:   PREFETCH window: 0x000000fdb00000-0x000000fdbfffff
>pci 0000:00:14.4: PCI bridge, secondary bus 0000:03
>pci 0000:00:14.4:   IO window: 0xc000-0xcfff
>pci 0000:00:14.4:   MEM window: 0xfdd00000-0xfddfffff
>pci 0000:00:14.4:   PREFETCH window: 0xfdc00000-0xfdcfffff
>pci 0000:00:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
>pci 0000:00:03.0: setting latency timer to 64
>pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>pci 0000:00:0a.0: setting latency timer to 64
>pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
>pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
>pci_bus 0000:01: resource 0 io:  [0xe000-0xefff]
>pci_bus 0000:01: resource 1 mem: [0xfdf00000-0xfdffffff]
>pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff]
>pci_bus 0000:02: resource 0 io:  [0xd000-0xdfff]
>pci_bus 0000:02: resource 1 mem: [0xfde00000-0xfdefffff]
>pci_bus 0000:02: resource 2 pref mem [0xfdb00000-0xfdbfffff]
>pci_bus 0000:03: resource 0 io:  [0xc000-0xcfff]
>pci_bus 0000:03: resource 1 mem: [0xfdd00000-0xfddfffff]
>pci_bus 0000:03: resource 2 pref mem [0xfdc00000-0xfdcfffff]
>pci_bus 0000:03: resource 3 io:  [0x00-0xffff]
>pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffffffffffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 262144 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>pci 0000:01:00.0: Boot video device
>Unpacking initramfs...
>Freeing initrd memory: 1790k freed
>PCI-DMA: Disabling AGP.
>PCI-DMA: aperture base @ 20000000 size 65536 KB
>PCI-DMA: using GART IOMMU.
>PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
>Scanning for low memory corruption every 60 seconds
>audit: initializing netlink socket (disabled)
>type=2000 audit(1266676292.562:1): initialized
>VFS: Disk quotas dquot_6.5.2
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>msgmni has been set to 7915
>alg: No test for stdrng (krng)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pcieport 0000:00:03.0: irq 25 for MSI/MSI-X
>pcieport 0000:00:03.0: setting latency timer to 64
>pcieport 0000:00:0a.0: irq 26 for MSI/MSI-X
>pcieport 0000:00:0a.0: setting latency timer to 64
>Linux agpgart interface v0.103
>Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
>input: Macintosh mouse button emulation as /devices/virtual/input/input0
>PNP: No PS/2 controller found. Probing ports directly.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>cpuidle: using governor ladder
>cpuidle: using governor menu
>TCP cubic registered
>NET: Registered protocol family 17
>PM: Resume from disk failed.
>registered taskstats version 1
>Initalizing network drop monitor service
>Freeing unused kernel memory: 484k freed
>SCSI subsystem initialized
>libata version 3.00 loaded.
>pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>scsi0 : pata_atiixp
>scsi1 : pata_atiixp
>ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14
>ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15
>ahci 0000:00:11.0: version 3.0
>ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
>ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc 
>scsi2 : ahci
>scsi3 : ahci
>scsi4 : ahci
>scsi5 : ahci
>scsi6 : ahci
>scsi7 : ahci
>ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22
>ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22
>ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22
>ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
>ata7: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f300 irq 22
>ata8: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f380 irq 22
>ata6: SATA link down (SStatus 0 SControl 300)
>ata8: SATA link down (SStatus 0 SControl 300)
>ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata5.00: ATAPI: ASUS    DRW-2014L1T, 1.00, max UDMA/66, ATAPI AN
>ata5.00: configured for UDMA/66
>ata3.00: ATA-7: SAMSUNG HD753LJ, 1AA01118, max UDMA7
>ata3.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
>ata7.00: ATA-7: SAMSUNG HD103UJ, 1AA01113, max UDMA7
>ata7.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
>ata3.00: configured for UDMA/133
>ata7.00: configured for UDMA/133
>scsi 2:0:0:0: Direct-Access     ATA      SAMSUNG HD753LJ  1AA0 PQ: 0 ANSI: 5
>ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata4.00: HPA detected: current 1465147055, native 1465149168
>ata4.00: ATA-7: WDC WD7500AAKS-00RBA0, 30.04G30, max UDMA/133
>ata4.00: 1465147055 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
>ata4.00: configured for UDMA/133
>scsi 3:0:0:0: Direct-Access     ATA      WDC WD7500AAKS-0 30.0 PQ: 0 ANSI: 5
>scsi 4:0:0:0: CD-ROM            ASUS     DRW-2014L1T      1.00 PQ: 0 ANSI: 5
>scsi 6:0:0:0: Direct-Access     ATA      SAMSUNG HD103UJ  1AA0 PQ: 0 ANSI: 5
>sd 2:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
>sd 2:0:0:0: [sda] Write Protect is off
>sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda:
>sd 3:0:0:0: [sdb] 1465147055 512-byte logical blocks: (750 GB/698 GiB)
>sd 6:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
>sd 6:0:0:0: [sdc] Write Protect is off
>sd 6:0:0:0: [sdc] Mode Sense: 00 3a 00 00
>sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdc:
>sd 3:0:0:0: [sdb] Write Protect is off
>sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sda1 sda2 sda3
>sd 2:0:0:0: [sda] Attached SCSI disk
> sdb1
>sd 3:0:0:0: [sdb] Attached SCSI disk
> sdc1 sdc2 sdc3
>sd 6:0:0:0: [sdc] Attached SCSI disk
>sr0: scsi3-mmc drive: 94x/94x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 4:0:0:0: Attached scsi CD-ROM sr0
>EXT4-fs (sdc2): mounted filesystem with ordered data mode
>Driver 'rtc_cmos' needs updating - please use bus_type methods
>rtc_cmos 00:05: RTC can wake from S4
>rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
>udev: starting version 151
>r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
>r8169 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>r8169 0000:02:00.0: setting latency timer to 64
>r8169 0000:02:00.0: irq 27 for MSI/MSI-X
>eth0: RTL8168d/8111d at 0xffffc90010168000, 00:24:1d:cf:df:f9, XID 083000c0 IRQ 27
>input: PC Speaker as /devices/platform/pcspkr/input/input1
>sd 2:0:0:0: Attached scsi generic sg0 type 0
>sd 3:0:0:0: Attached scsi generic sg1 type 0
>sr 4:0:0:0: Attached scsi generic sg2 type 5
>sd 6:0:0:0: Attached scsi generic sg3 type 0
>input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
>ACPI: Power Button [PWRB]
>input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
>ACPI: Power Button [PWRF]
>processor LNXCPU:00: registered as cooling_device0
>processor LNXCPU:01: registered as cooling_device1
>processor LNXCPU:02: registered as cooling_device2
>processor LNXCPU:03: registered as cooling_device3
>ACPI: I/O resource piix4_smbus [0xb00-0xb07] conflicts with ACPI region SOR1 [0xb00-0xb0f]
>ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>EDAC MC: Ver: 2.1.0 Feb 20 2010
>[drm] Initialized drm 1.1.0 20060810
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>EDAC amd64_edac:  Ver: 3.2.0 Feb 20 2010
>EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3).
>EDAC amd64: WARNING: ECC is disabled by BIOS. Module will NOT be loaded.
> Either Enable ECC in the BIOS, or set 'ecc_enable_override'.
> Also, use of the override can cause unknown side effects.
>amd64_edac: probe of 0000:00:18.2 failed with error -22
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>ehci_hcd 0000:00:12.2: EHCI Host Controller
>ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:12.2: debug port 1
>ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe02c000
>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 6 ports detected
>ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>ohci_hcd 0000:00:12.0: OHCI Host Controller
>ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe02e000
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 3 ports detected
>ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>ehci_hcd 0000:00:13.2: EHCI Host Controller
>ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
>ehci_hcd 0000:00:13.2: debug port 1
>ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe029000
>ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 6 ports detected
>HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>[drm] radeon defaulting to kernel modesetting.
>[drm] radeon kernel modesetting enabled.
>radeon 0000:01:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
>radeon 0000:01:00.0: setting latency timer to 64
>[drm] radeon: Initializing kernel modesetting.
>[drm] register mmio base: 0xFDFC0000
>[drm] register mmio size: 131072
>ATOM BIOS: 6899.12.11.0.6.AS01
>[drm] Clocks initialized !
>[drm] 1 Power State(s)
>[drm] State 0 Default (default)
>[drm] 	16 PCIE Lanes
>[drm] 	1 Clock Mode(s)
>[drm] 		0 engine/memory: 400000/900000
>[drm] radeon: power management initialized
>radeon 0000:01:00.0: VRAM: 256M 0x00000000 - 0x0FFFFFFF (256M used)
>radeon 0000:01:00.0: GTT: 512M 0x10000000 - 0x2FFFFFFF
>[drm] Detected VRAM RAM=256M, BAR=256M
>[drm] RAM width 256bits DDR
>[TTM] Zone  kernel: Available graphics memory: 2026552 kiB.
>[drm] radeon: 256M of VRAM memory ready
>[drm] radeon: 512M of GTT memory ready.
>[drm] Radeon Display Connectors
>[drm] Connector 0:
>[drm]   DisplayPort
>[drm]   HPD4
>[drm]   DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
>[drm]   Encoders:
>[drm]     DFP1: INTERNAL_UNIPHY2
>[drm] Connector 1:
>[drm]   HDMI-A
>[drm]   HPD5
>[drm]   DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
>[drm]   Encoders:
>[drm]     DFP2: INTERNAL_UNIPHY2
>[drm] Connector 2:
>[drm]   DVI-I
>[drm]   HPD1
>[drm]   DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
>[drm]   Encoders:
>[drm]     DFP3: INTERNAL_UNIPHY1
>[drm]     CRT2: INTERNAL_KLDSCP_DAC2
>[drm] Connector 3:
>[drm]   DVI-I
>[drm]   HPD6
>[drm]   DDC: 0x6470 0x6470 0x6474 0x6474 0x6478 0x6478 0x647c 0x647c
>[drm]   Encoders:
>[drm]     DFP4: INTERNAL_UNIPHY
>[drm]     CRT1: INTERNAL_KLDSCP_DAC1
>hub 1-0:1.0: unable to enumerate USB device on port 1
>hda_codec: ALC889: BIOS auto-probing.
>input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input4
>ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>ohci_hcd 0000:00:12.1: OHCI Host Controller
>ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
>ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe02d000
>usb 1-2: new high speed USB device using ehci_hcd and address 3
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 3 ports detected
>ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>ohci_hcd 0000:00:13.0: OHCI Host Controller
>ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
>ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe02b000
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 3 ports detected
>ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>ohci_hcd 0000:00:13.1: OHCI Host Controller
>ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
>ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe02a000
>usb usb6: configuration #1 chosen from 1 choice
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 3 ports detected
>ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>ohci_hcd 0000:00:14.5: OHCI Host Controller
>ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
>ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe028000
>[drm] fb mappable at 0xD0040000
>[drm] vram apper at 0xD0000000
>[drm] size 8294400
>[drm] fb depth is 24
>[drm]    pitch is 7680
>Console: switching to colour frame buffer device 240x67
>usb 1-2: configuration #1 chosen from 1 choice
>fb0: radeondrmfb frame buffer device
>registered panic notifier
>[drm] Initialized radeon 2.0.0 20080528 for 0000:01:00.0 on minor 0
>HDA Intel 0000:01:00.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
>HDA Intel 0000:01:00.1: setting latency timer to 64
>Initializing USB Mass Storage driver...
>scsi8 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 3
>usb-storage: waiting for device to settle before scanning
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>usb usb7: configuration #1 chosen from 1 choice
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 2 ports detected
>usb 6-2: new full speed USB device using ohci_hcd and address 2
>usb 6-2: configuration #1 chosen from 1 choice
>usb 6-3: new full speed USB device using ohci_hcd and address 3
>usb 6-3: configuration #1 chosen from 1 choice
>usbcore: registered new interface driver hiddev
>input: Logitech USB Receiver as /devices/pci0000:00/0000:00:13.1/usb6/6-3/6-3:1.0/input/input5
>generic-usb 0003:046D:C529.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:13.1-3/input0
>input: Logitech USB Receiver as /devices/pci0000:00/0000:00:13.1/usb6/6-3/6-3:1.1/input/input6
>generic-usb 0003:046D:C529.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:13.1-3/input1
>usbcore: registered new interface driver usbhid
>usbhid: v2.6:USB HID core driver
>usb 2-1: new full speed USB device using ohci_hcd and address 2
>usb 2-1: configuration #1 chosen from 1 choice
>input: Razer Razer Copperhead Laser Mouse as /devices/pci0000:00/0000:00:12.0/usb2/2-1/2-1:1.0/input/input7
>generic-usb 0003:1532:0101.0003: input,hidraw2: USB HID v1.00 Mouse [Razer Razer Copperhead Laser Mouse] on usb-0000:00:12.0-1/input0
>input: Razer Razer Copperhead Laser Mouse as /devices/pci0000:00/0000:00:12.0/usb2/2-1/2-1:1.1/input/input8
>generic-usb 0003:1532:0101.0004: input,hidraw3: USB HID v0.01 Keyboard [Razer Razer Copperhead Laser Mouse] on usb-0000:00:12.0-1/input1
>EXT4-fs (sdc3): mounted filesystem with ordered data mode
>Adding 16386260k swap on /dev/sdc1.  Priority:-1 extents:1 across:16386260k 
>scsi 8:0:0:0: Direct-Access              USB DISK 2.0     PMAP PQ: 0 ANSI: 0 CCS
>sd 8:0:0:0: Attached scsi generic sg4 type 0
>sd 8:0:0:0: [sdd] 31277056 512-byte logical blocks: (16.0 GB/14.9 GiB)
>sd 8:0:0:0: [sdd] Write Protect is off
>sd 8:0:0:0: [sdd] Mode Sense: 23 00 00 00
>sd 8:0:0:0: [sdd] Assuming drive cache: write through
>sd 8:0:0:0: [sdd] Assuming drive cache: write through
>usb-storage: device scan complete
> sdd: sdd1
>sd 8:0:0:0: [sdd] Assuming drive cache: write through
>sd 8:0:0:0: [sdd] Attached SCSI removable disk
>r8169: eth0: link up
>r8169: eth0: link up
>Slow work thread pool: Starting up
>Slow work thread pool: Ready
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
> CIFS VFS: Error connecting to socket. Aborting operation
> CIFS VFS: cifs_mount failed w/return code = -101
> CIFS VFS: Error connecting to socket. Aborting operation
> CIFS VFS: cifs_mount failed w/return code = -101
> CIFS VFS: Error connecting to socket. Aborting operation
> CIFS VFS: cifs_mount failed w/return code = -101
>eth0: no IPv6 routers present

Actions: View

Attachments on bug 23234: 28492 | 28493 | 29540 | 33446 | 33447

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.