Attachment 73794 Details for Bug 59986 – complete dmesg

complete dmesg

file_59986.txt (text/plain), 41.92 KB, created by Jan Kundrát on 2013-01-28 19:58:01 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Jan Kundrát

Created: 2013-01-28 19:58:01 UTC

Size: 41.92 KB

patch

obsolete

>ACPI: ACPI Dock Station Driver: 2 docks/bays found
>PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>pci_root PNP0A08:00: Requesting ACPI _OSC control (0x1d)
>pci_root PNP0A08:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x0d
>pci_root PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
>PCI host bridge to bus 0000:00
>pci_bus 0000:00: root bus resource [bus 00-fe]
>pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
>pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
>pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
>pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfebfffff]
>pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed4bfff]
>pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
>pci 0000:00:02.0: [8086:0126] type 00 class 0x030000
>pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf03fffff 64bit]
>pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
>pci 0000:00:02.0: reg 20: [io  0x4000-0x403f]
>pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
>pci 0000:00:16.0: reg 10: [mem 0xf1625000-0xf162500f 64bit]
>pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
>pci 0000:00:19.0: reg 10: [mem 0xf1600000-0xf161ffff]
>pci 0000:00:19.0: reg 14: [mem 0xf162b000-0xf162bfff]
>pci 0000:00:19.0: reg 18: [io  0x4080-0x409f]
>pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
>pci 0000:00:1a.0: reg 10: [mem 0xf162a000-0xf162a3ff]
>pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
>pci 0000:00:1b.0: reg 10: [mem 0xf1620000-0xf1623fff 64bit]
>pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
>pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
>pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
>pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
>pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
>pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
>pci 0000:00:1d.0: reg 10: [mem 0xf1629000-0xf16293ff]
>pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1f.0: [8086:1c4f] type 00 class 0x060100
>pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
>pci 0000:00:1f.2: reg 10: [io  0x40a8-0x40af]
>pci 0000:00:1f.2: reg 14: [io  0x40b4-0x40b7]
>pci 0000:00:1f.2: reg 18: [io  0x40a0-0x40a7]
>pci 0000:00:1f.2: reg 1c: [io  0x40b0-0x40b3]
>pci 0000:00:1f.2: reg 20: [io  0x4060-0x407f]
>pci 0000:00:1f.2: reg 24: [mem 0xf1628000-0xf16287ff]
>pci 0000:00:1f.2: PME# supported from D3hot
>pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
>pci 0000:00:1f.3: reg 10: [mem 0xf1624000-0xf16240ff 64bit]
>pci 0000:00:1f.3: reg 20: [io  0xefa0-0xefbf]
>pci 0000:00:1c.0: PCI bridge to [bus 02]
>pci 0000:03:00.0: [8086:0085] type 00 class 0x028000
>pci 0000:03:00.0: reg 10: [mem 0xf1500000-0xf1501fff 64bit]
>pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.1: PCI bridge to [bus 03]
>pci 0000:00:1c.1:   bridge window [mem 0xf1500000-0xf15fffff]
>pci 0000:05:00.0: [1180:e823] type 00 class 0x088000
>pci 0000:05:00.0: MMC controller base frequency changed to 50Mhz.
>pci 0000:05:00.0: reg 10: [mem 0xf0d00000-0xf0d000ff]
>pci 0000:05:00.0: supports D1 D2
>pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
>pci 0000:00:1c.3:   bridge window [io  0x3000-0x3fff]
>pci 0000:00:1c.3:   bridge window [mem 0xf0d00000-0xf14fffff]
>pci 0000:00:1c.3:   bridge window [mem 0xf0400000-0xf0bfffff 64bit pref]
>pci 0000:0d:00.0: [1033:0194] type 00 class 0x0c0330
>pci 0000:0d:00.0: reg 10: [mem 0xf0c00000-0xf0c01fff 64bit]
>pci 0000:0d:00.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.4: PCI bridge to [bus 0d]
>pci 0000:00:1c.4:   bridge window [mem 0xf0c00000-0xf0cfffff]
>pci_bus 0000:00: on NUMA node 0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP5._PRT]
>ACPI _OSC control for PCIe not granted, disabling ASPM
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 9 10 11)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 9 10 11)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11)
>vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
>vgaarb: loaded
>vgaarb: bridge control possible 0000:00:02.0
>SCSI subsystem initialized
>PCI: Using ACPI for IRQ routing
>PCI: pci_cache_line_size set to 64 bytes
>e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
>e820: reserve RAM buffer [mem 0xda89f000-0xdbffffff]
>e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff]
>e820: reserve RAM buffer [mem 0x11e600000-0x11fffffff]
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
>hpet0: 8 comparators, 64-bit 14.318180 MHz counter
>Switching to clocksource hpet
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
>system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
>system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
>system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved
>system 00:00: [mem 0x000cc000-0x000cffff] has been reserved
>system 00:00: [mem 0x000d0000-0x000d3fff] has been reserved
>system 00:00: [mem 0x000d4000-0x000d7fff] has been reserved
>system 00:00: [mem 0x000d8000-0x000dbfff] has been reserved
>system 00:00: [mem 0x000dc000-0x000dffff] has been reserved
>system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
>system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
>system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
>system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
>system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
>system 00:00: [mem 0x00100000-0xdf9fffff] could not be reserved
>system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
>system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved
>system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
>system 00:01: [io  0x0400-0x047f] has been reserved
>system 00:01: [io  0x0500-0x057f] has been reserved
>system 00:01: [io  0x0800-0x080f] has been reserved
>system 00:01: [io  0x15e0-0x15ef] has been reserved
>system 00:01: [io  0x1600-0x167f] has been reserved
>system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
>system 00:01: [mem 0x00000000-0x00000fff] could not be reserved
>system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
>system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved
>system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
>system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
>system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved
>system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
>pnp 00:03: [dma 4]
>pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
>pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
>pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
>pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
>pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
>pnp 00:08: Plug and Play ACPI device, IDs LEN0015 PNP0f13 (active)
>pnp 00:09: Plug and Play ACPI device, IDs SMO1200 PNP0c31 (active)
>pnp: PnP ACPI: found 10 devices
>ACPI: ACPI bus type pnp unregistered
>pci 0000:00:1c.0: PCI bridge to [bus 02]
>pci 0000:00:1c.1: PCI bridge to [bus 03]
>pci 0000:00:1c.1:   bridge window [mem 0xf1500000-0xf15fffff]
>pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
>pci 0000:00:1c.3:   bridge window [io  0x3000-0x3fff]
>pci 0000:00:1c.3:   bridge window [mem 0xf0d00000-0xf14fffff]
>pci 0000:00:1c.3:   bridge window [mem 0xf0400000-0xf0bfffff 64bit pref]
>pci 0000:00:1c.4: PCI bridge to [bus 0d]
>pci 0000:00:1c.4:   bridge window [mem 0xf0c00000-0xf0cfffff]
>pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
>pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
>pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
>pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfebfffff]
>pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed4bfff]
>pci_bus 0000:03: resource 1 [mem 0xf1500000-0xf15fffff]
>pci_bus 0000:05: resource 0 [io  0x3000-0x3fff]
>pci_bus 0000:05: resource 1 [mem 0xf0d00000-0xf14fffff]
>pci_bus 0000:05: resource 2 [mem 0xf0400000-0xf0bfffff 64bit pref]
>pci_bus 0000:0d: resource 1 [mem 0xf0c00000-0xf0cfffff]
>NET: Registered protocol family 2
>TCP established hash table entries: 32768 (order: 7, 524288 bytes)
>TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 32768 bind 32768)
>TCP: reno registered
>UDP hash table entries: 2048 (order: 4, 65536 bytes)
>UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
>NET: Registered protocol family 1
>pci 0000:00:02.0: Boot video device
>PCI: CLS 64 bytes, default 64
>Trying to unpack rootfs image as initramfs...
>Freeing initrd memory: 2096k freed
>PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>software IO TLB [mem 0xd689d000-0xda89d000] (64MB) mapped at [ffff8800d689d000-ffff8800da89cfff]
>alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
>audit: initializing netlink socket (disabled)
>type=2000 audit(1359382240.032:1): initialized
>VFS: Disk quotas dquot_6.5.2
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
>msgmni has been set to 7666
>alg: No test for stdrng (krng)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler cfq registered (default)
>intel_idle: MWAIT substates: 0x21120
>intel_idle: v0.4 model 0x2A
>intel_idle: lapic_timer_reliable_states 0xffffffff
>input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
>ACPI: Lid Switch [LID]
>input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
>ACPI: Sleep Button [SLPB]
>input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
>ACPI: Power Button [PWRF]
>ACPI: Requesting acpi_cpufreq
>thermal LNXTHERM:00: registered as thermal_zone0
>ACPI: Thermal Zone [THM0] (25 C)
>Linux agpgart interface v0.103
>[drm] Initialized drm 1.1.0 20060810
>[drm] Memory usable by graphics device = 2048M
>i915 0000:00:02.0: setting latency timer to 64
>i915 0000:00:02.0: irq 40 for MSI/MSI-X
>[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
>[drm] Driver supports precise vblank timestamp query.
>vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
>[drm] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
>fbcon: inteldrmfb (fb0) is primary device
>Console: switching to colour frame buffer device 200x56
>i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
>i915 0000:00:02.0: registered panic notifier
>acpi device:00: registered as cooling_device4
>ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
>input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
>[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
>brd: module loaded
>loop: module loaded
>i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mousedev: PS/2 mouse device common for all mice
>rtc_cmos 00:06: RTC can wake from S4
>rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com
>EDAC MC: Ver: 3.0.0
>cpuidle: using governor ladder
>cpuidle: using governor menu
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
>TCP: cubic registered
>NET: Registered protocol family 10
>NET: Registered protocol family 17
>NET: Registered protocol family 15
>Key type dns_resolver registered
>registered taskstats version 1
>rtc_cmos 00:06: setting system clock to 2013-01-28 14:10:41 UTC (1359382241)
>Freeing unused kernel memory: 544k freed
>Write protecting the kernel read-only data: 8192k
>Freeing unused kernel memory: 1404k freed
>Freeing unused kernel memory: 280k freed
>tsc: Refined TSC clocksource calibration: 2491.905 MHz
>Switching to clocksource tsc
>ACPI: bus type scsi registered
>libata version 3.00 loaded.
>ahci 0000:00:1f.2: version 3.0
>ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
>ahci: SSS flag set, parallel bus scan disabled
>ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x13 impl SATA mode
>ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst 
>ahci 0000:00:1f.2: setting latency timer to 64
>scsi0 : ahci
>scsi1 : ahci
>scsi2 : ahci
>scsi3 : ahci
>scsi4 : ahci
>scsi5 : ahci
>ata1: SATA max UDMA/133 abar m2048@0xf1628000 port 0xf1628100 irq 41
>ata2: SATA max UDMA/133 abar m2048@0xf1628000 port 0xf1628180 irq 41
>ata3: DUMMY
>ata4: DUMMY
>ata5: SATA max UDMA/133 abar m2048@0xf1628000 port 0xf1628300 irq 41
>ata6: DUMMY
>[drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
>psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd047b3/0xb40000/0xa0000, board id: 71, fw id: 578367
>psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
>input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>ata1.00: ATA-8: INTEL SSDSA2CW160G3, 4PC10362, max UDMA/133
>ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
>ata1.00: failed to get Identify Device Data, Emask 0x1
>ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>ata1.00: failed to get Identify Device Data, Emask 0x1
>ata1.00: configured for UDMA/133
>scsi 0:0:0:0: Direct-Access     ATA      INTEL SSDSA2CW16 4PC1 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2
>sd 0:0:0:0: [sda] Attached SCSI disk
>ata2: SATA link down (SStatus 0 SControl 300)
>ata5: SATA link down (SStatus 0 SControl 300)
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>ACPI: bus type usb registered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>Initializing USB Mass Storage driver...
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>uhci_hcd: USB Universal Host Controller Interface driver
>xhci_hcd 0000:0d:00.0: xHCI Host Controller
>xhci_hcd 0000:0d:00.0: new USB bus registered, assigned bus number 1
>xhci_hcd 0000:0d:00.0: irq 16, io mem 0xf0c00000
>xhci_hcd 0000:0d:00.0: irq 42 for MSI/MSI-X
>xhci_hcd 0000:0d:00.0: irq 43 for MSI/MSI-X
>xhci_hcd 0000:0d:00.0: irq 44 for MSI/MSI-X
>xhci_hcd 0000:0d:00.0: irq 45 for MSI/MSI-X
>xhci_hcd 0000:0d:00.0: irq 46 for MSI/MSI-X
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: xHCI Host Controller
>usb usb1: Manufacturer: Linux 3.8.0-rc3 xhci_hcd
>usb usb1: SerialNumber: 0000:0d:00.0
>xHCI xhci_add_endpoint called for root hub
>xHCI xhci_check_bandwidth called for root hub
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>xhci_hcd 0000:0d:00.0: xHCI Host Controller
>xhci_hcd 0000:0d:00.0: new USB bus registered, assigned bus number 2
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: xHCI Host Controller
>usb usb2: Manufacturer: Linux 3.8.0-rc3 xhci_hcd
>usb usb2: SerialNumber: 0000:0d:00.0
>xHCI xhci_add_endpoint called for root hub
>xHCI xhci_check_bandwidth called for root hub
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>usbcore: registered new interface driver usbhid
>usbhid: USB HID core driver
>RPC: Registered named UNIX socket transport module.
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>RPC: Registered tcp NFSv4.1 backchannel transport module.
>fuse init (API version 7.20)
>psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
>input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input6
>bio: create slab <bio-1> at 1
>bio: create slab <bio-1> at 1
>FAT-fs (dm-0): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
>XFS (dm-0): Mounting Filesystem
>XFS (dm-0): Starting recovery (logdev: internal)
>XFS (dm-0): Ending recovery (logdev: internal)
>udevd[4379]: starting version 171
>ehci-pci: EHCI PCI platform driver
>ehci-pci 0000:00:1a.0: setting latency timer to 64
>ehci-pci 0000:00:1a.0: EHCI Host Controller
>ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
>ehci-pci 0000:00:1a.0: debug port 2
>ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
>ehci-pci 0000:00:1a.0: irq 16, io mem 0xf162a000
>e1000e: Intel(R) PRO/1000 Network Driver - 2.1.4-k
>e1000e: Copyright(c) 1999 - 2012 Intel Corporation.
>ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: EHCI Host Controller
>usb usb3: Manufacturer: Linux 3.8.0-rc3 ehci_hcd
>usb usb3: SerialNumber: 0000:00:1a.0
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 3 ports detected
>ehci-pci 0000:00:1d.0: setting latency timer to 64
>ehci-pci 0000:00:1d.0: EHCI Host Controller
>ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
>cfg80211: Calling CRDA to update world regulatory domain
>sdhci: Secure Digital Host Controller Interface driver
>sdhci: Copyright(c) Pierre Ossman
>sdhci-pci 0000:05:00.0: SDHCI controller found [1180:e823] (rev 4)
>ehci-pci 0000:00:1d.0: debug port 2
>ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
>ehci-pci 0000:00:1d.0: irq 23, io mem 0xf1629000
>ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: EHCI Host Controller
>usb usb4: Manufacturer: Linux 3.8.0-rc3 ehci_hcd
>usb usb4: SerialNumber: 0000:00:1d.0
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 3 ports detected
>e1000e 0000:00:19.0: setting latency timer to 64
>e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
>e1000e 0000:00:19.0: irq 47 for MSI/MSI-X
>Intel(R) Wireless WiFi driver for Linux, in-tree:
>Copyright(c) 2003-2012 Intel Corporation
>iwlwifi 0000:03:00.0: irq 48 for MSI/MSI-X
>ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
>ACPI: AC Adapter [AC] (off-line)
>tpm_tis 00:09: 1.2 TPM (device-id 0x0, rev-id 78)
>Non-volatile memory driver v1.3
>mmc0: SDHCI controller on PCI [0000:05:00.0] using DMA
>thinkpad_acpi: ThinkPad ACPI Extras v0.24
>thinkpad_acpi: http://ibm-acpi.sf.net/
>thinkpad_acpi: ThinkPad BIOS 8CET48WW (1.28 ), EC unknown
>thinkpad_acpi: Lenovo ThinkPad T420s, model 41716SG
>thinkpad_acpi: detected a 8-level brightness capable ThinkPad
>thinkpad_acpi: radio switch found; radios are enabled
>thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
>thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
>input: PC Speaker as /devices/platform/pcspkr/input/input7
>microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x1a
>ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
>ACPI: Battery Slot [BAT0] (battery present)
>tpm_tis 00:09: TPM is disabled/deactivated (0x6)
>ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
>ACPI: Battery Slot [BAT1] (battery present)
>thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is blocked
>thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
>thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
>input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input8
>microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x1a
>microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x1a
>iwlwifi 0000:03:00.0: loaded firmware version 17.168.5.3 build 42301
>microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x1a
>microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
>iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled
>iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
>iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
>iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE disabled
>iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_P2P disabled
>iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0
>iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
>iwlwifi 0000:03:00.0: RF_KILL bit toggled to enable radio.
>cfg80211: World regulatory domain updated:
>cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
>e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) f0:de:f1:6e:99:1a
>e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
>e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
>i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
>snd_hda_intel 0000:00:1b.0: irq 49 for MSI/MSI-X
>input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
>input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
>input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
>input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
>usb 3-1: new high-speed USB device number 2 using ehci-pci
>usb 3-1: New USB device found, idVendor=8087, idProduct=0024
>usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>hub 3-1:1.0: USB hub found
>hub 3-1:1.0: 6 ports detected
>usb 4-1: new high-speed USB device number 2 using ehci-pci
>usb 4-1: New USB device found, idVendor=8087, idProduct=0024
>usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>hub 4-1:1.0: USB hub found
>hub 4-1:1.0: 8 ports detected
>usb 3-1.3: new full-speed USB device number 3 using ehci-pci
>usb 3-1.3: New USB device found, idVendor=147e, idProduct=2016
>usb 3-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 3-1.3: Product: Biometric Coprocessor
>usb 3-1.3: Manufacturer: UPEK
>usb 3-1.4: new full-speed USB device number 4 using ehci-pci
>usb 3-1.4: New USB device found, idVendor=0a5c, idProduct=217f
>usb 3-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 3-1.4: Product: Broadcom Bluetooth Device
>usb 3-1.4: Manufacturer: Broadcom Corp
>usb 3-1.4: SerialNumber: EC55F9FB23C2
>Bluetooth: Core ver 2.16
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: SCO socket layer initialized
>usbcore: registered new interface driver btusb
>usb 3-1.6: new high-speed USB device number 5 using ehci-pci
>usb 3-1.6: New USB device found, idVendor=04f2, idProduct=b221
>usb 3-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 3-1.6: Product: Integrated Camera
>usb 3-1.6: Manufacturer: Chicony Electronics Co., Ltd.
>e1000e 0000:00:19.0: irq 47 for MSI/MSI-X
>e1000e 0000:00:19.0: irq 47 for MSI/MSI-X
>IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
>iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
>iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
>iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
>iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
>IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>wlan0: authenticate with e8:ba:70:92:63:80
>wlan0: send auth to e8:ba:70:92:63:80 (try 1/3)
>wlan0: authenticated
>wlan0: associate with e8:ba:70:92:63:80 (try 1/3)
>wlan0: RX AssocResp from e8:ba:70:92:63:80 (capab=0x431 status=0 aid=14)
>wlan0: associated
>IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>cfg80211: Calling CRDA for country: CZ
>cfg80211: Regulatory domain changed to country: CZ
>cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>cfg80211:   (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
>cfg80211:   (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2301 mBm)
>cfg80211:   (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>cfg80211:   (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm)
>thinkpad_acpi: docked into hotplug port replicator
>usb 3-1.5: new high-speed USB device number 6 using ehci-pci
>usb 3-1.5: New USB device found, idVendor=17ef, idProduct=100a
>usb 3-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>hub 3-1.5:1.0: USB hub found
>hub 3-1.5:1.0: 6 ports detected
>usb 3-1.5.1: new low-speed USB device number 7 using ehci-pci
>usb 3-1.5.1: New USB device found, idVendor=046d, idProduct=c069
>usb 3-1.5.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 3-1.5.1: Product: USB Laser Mouse
>usb 3-1.5.1: Manufacturer: Logitech
>input: Logitech USB Laser Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.5/3-1.5.1/3-1.5.1:1.0/input/input13
>hid-generic 0003:046D:C069.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Laser Mouse] on usb-0000:00:1a.0-1.5.1/input0
>usb 3-1.5.2: new low-speed USB device number 8 using ehci-pci
>usb 3-1.5.2: New USB device found, idVendor=04f2, idProduct=0833
>usb 3-1.5.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 3-1.5.2: Product: USB Keyboard
>usb 3-1.5.2: Manufacturer: CHICONY
>input: CHICONY USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.5/3-1.5.2/3-1.5.2:1.0/input/input14
>hid-generic 0003:04F2:0833.0002: input,hidraw1: USB HID v1.11 Keyboard [CHICONY USB Keyboard] on usb-0000:00:1a.0-1.5.2/input0
>input: CHICONY USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.5/3-1.5.2/3-1.5.2:1.1/input/input15
>hid-generic 0003:04F2:0833.0003: input,hiddev0,hidraw2: USB HID v1.11 Device [CHICONY USB Keyboard] on usb-0000:00:1a.0-1.5.2/input1
>ata1.00: failed to get Identify Device Data, Emask 0x1
>ata1.00: failed to get Identify Device Data, Emask 0x1
>ata1.00: configured for UDMA/133
>ata1: EH complete
>sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
>usb 3-1.5.4: new high-speed USB device number 9 using ehci-pci
>usb 3-1.5.4: New USB device found, idVendor=0424, idProduct=2514
>usb 3-1.5.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>hub 3-1.5.4:1.0: USB hub found
>hub 3-1.5.4:1.0: 3 ports detected
>usb 3-1.5.4.1: new high-speed USB device number 10 using ehci-pci
>usb 3-1.5.4.1: New USB device found, idVendor=0424, idProduct=2640
>usb 3-1.5.4.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>hub 3-1.5.4.1:1.0: USB hub found
>hub 3-1.5.4.1:1.0: 3 ports detected
>thinkpad_acpi: unknown possible thermal alarm or keyboard event received
>thinkpad_acpi: unhandled HKEY event 0x6040
>thinkpad_acpi: please report the conditions when this event happened to ibm-acpi-devel@lists.sourceforge.net
>usb 3-1.5.4.1.1: new high-speed USB device number 11 using ehci-pci
>usb 3-1.5.4.1.1: New USB device found, idVendor=0424, idProduct=4063
>usb 3-1.5.4.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 3-1.5.4.1.1: Product: Ultra Fast Media Reader
>usb 3-1.5.4.1.1: Manufacturer: Generic
>usb 3-1.5.4.1.1: SerialNumber: 000000264001
>scsi6 : usb-storage 3-1.5.4.1.1:1.0
>scsi 6:0:0:0: Direct-Access     Generic  Ultra HS-SD/MMC  1.91 PQ: 0 ANSI: 0
>sd 6:0:0:0: Attached scsi generic sg1 type 0
>sd 6:0:0:0: [sdb] Attached SCSI removable disk
>e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
>IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>usb 3-1.5.3: new high-speed USB device number 12 using ehci-pci
>usb 3-1.5.3: New USB device found, idVendor=0421, idProduct=03d1
>usb 3-1.5.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 3-1.5.3: Product: Nokia N950
>usb 3-1.5.3: Manufacturer: Nokia
>usb 3-1.5.3: SerialNumber: 357881040001804
>scsi7 : usb-storage 3-1.5.3:1.0
>scsi 7:0:0:0: Direct-Access     Nokia    Nokia N950       0316 PQ: 0 ANSI: 2
>sd 7:0:0:0: Attached scsi generic sg2 type 0
>sd 7:0:0:0: [sdc] Attached SCSI removable disk
>usb 3-1.5.3: USB disconnect, device number 12
>usb 3-1.5.3: new high-speed USB device number 13 using ehci-pci
>usb 3-1.5.3: New USB device found, idVendor=0421, idProduct=05d8
>usb 3-1.5.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 3-1.5.3: Product: Nokia N950 RNDIS/Ethernet
>usb 3-1.5.3: Manufacturer: Nokia
>usb 3-1.5.3: SerialNumber: 357881040001804
>cdc_ether 3-1.5.3:1.0 usb0: register 'cdc_ether' at usb-0000:00:1a.0-1.5.3, CDC Ethernet Device, be:55:0d:b9:a2:3f
>usbcore: registered new interface driver cdc_ether
>IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready
>IPv6: ADDRCONF(NETDEV_CHANGE): usb0: link becomes ready
>cfg80211: Calling CRDA to update world regulatory domain
>cfg80211: World regulatory domain updated:
>cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>wlan0: authenticate with e8:ba:70:92:63:8f
>wlan0: send auth to e8:ba:70:92:63:8f (try 1/3)
>wlan0: send auth to e8:ba:70:92:63:8f (try 2/3)
>wlan0: authenticated
>wlan0: associate with e8:ba:70:92:63:8f (try 1/3)
>wlan0: RX AssocResp from e8:ba:70:92:63:8f (capab=0x111 status=0 aid=1)
>wlan0: associated
>cfg80211: Calling CRDA for country: CZ
>cfg80211: Regulatory domain changed to country: CZ
>cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>cfg80211:   (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
>cfg80211:   (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2301 mBm)
>cfg80211:   (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>cfg80211:   (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm)
>hda-intel 0000:00:1b.0: Unstable LPIB (65488 >= 8192); disabling LPIB delay counting
>wlan0: deauthenticated from e8:ba:70:92:63:8f (Reason: 15)
>cfg80211: Calling CRDA to update world regulatory domain
>cfg80211: World regulatory domain updated:
>cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>wlan0: authenticate with e8:ba:70:92:60:40
>wlan0: send auth to e8:ba:70:92:60:40 (try 1/3)
>wlan0: authenticated
>wlan0: waiting for beacon from e8:ba:70:92:60:40
>wlan0: associate with e8:ba:70:92:60:40 (try 1/3)
>wlan0: RX AssocResp from e8:ba:70:92:60:40 (capab=0x431 status=0 aid=16)
>wlan0: associated
>cfg80211: Calling CRDA for country: CZ
>cfg80211: Regulatory domain changed to country: CZ
>cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>cfg80211:   (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
>cfg80211:   (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2301 mBm)
>cfg80211:   (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>cfg80211:   (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm)
>[drm:i915_hangcheck_hung] *ERROR* Hangcheck timer elapsed... GPU hung
>[drm] capturing error event; look for more information in /debug/dri/0/i915_error_state
>[drm:kick_ring] *ERROR* Kicking stuck wait on render ring
>cp: page allocation failure: order:9, mode:0x1040d0
>Pid: 22036, comm: cp Not tainted 3.8.0-rc3 #1
>Call Trace:
> [<ffffffff810b6a9e>] warn_alloc_failed+0x108/0x11d
> [<ffffffff810b8507>] ? drain_local_pages+0x11/0x13
> [<ffffffff810b99b7>] __alloc_pages_nodemask+0x769/0x7fc
> [<ffffffff810b9ac5>] __get_free_pages+0x12/0x41
> [<ffffffff810e6013>] kmalloc_order_trace+0x2e/0x83
> [<ffffffff810e7798>] __kmalloc+0x36/0x12e
> [<ffffffff810b89db>] ? __free_memcg_kmem_pages+0x9/0xb
> [<ffffffff81109c9c>] seq_read+0x1e9/0x353
> [<ffffffff810ef140>] vfs_read+0xad/0x129
> [<ffffffff810ef20b>] sys_read+0x4f/0x79
> [<ffffffff8149a752>] system_call_fastpath+0x16/0x1b
>Mem-Info:
>DMA per-cpu:
>CPU    0: hi:    0, btch:   1 usd:   0
>CPU    1: hi:    0, btch:   1 usd:   0
>CPU    2: hi:    0, btch:   1 usd:   0
>CPU    3: hi:    0, btch:   1 usd:   0
>DMA32 per-cpu:
>CPU    0: hi:  186, btch:  31 usd:   0
>CPU    1: hi:  186, btch:  31 usd:   0
>CPU    2: hi:  186, btch:  31 usd:   0
>CPU    3: hi:  186, btch:  31 usd:   0
>Normal per-cpu:
>CPU    0: hi:  186, btch:  31 usd:   0
>CPU    1: hi:  186, btch:  31 usd:   0
>CPU    2: hi:  186, btch:  31 usd:   0
>CPU    3: hi:  186, btch:  31 usd:   0
>active_anon:552924 inactive_anon:67302 isolated_anon:0
> active_file:58757 inactive_file:123989 isolated_file:0
> unevictable:1 dirty:387 writeback:0 unstable:0
> free:129169 slab_reclaimable:11537 slab_unreclaimable:8605
> mapped:108589 shmem:125321 pagetables:8688 bounce:0
> free_cma:0
>DMA free:15900kB min:524kB low:652kB high:784kB active_anon:0kB inactive_anon:0kB active_file:0kB inactive_file:0kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:15644kB managed:15900kB mlocked:0kB dirty:0kB writeback:0kB mapped:0kB shmem:0kB slab_reclaimable:0kB slab_unreclaimable:0kB kernel_stack:0kB pagetables:0kB unstable:0kB bounce:0kB free_cma:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? yes
>lowmem_reserve[]: 0 3422 3900 3900
>DMA32 free:478140kB min:118124kB low:147652kB high:177184kB active_anon:1909096kB inactive_anon:240536kB active_file:234424kB inactive_file:495032kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:3504436kB managed:3482280kB mlocked:0kB dirty:1456kB writeback:0kB mapped:402060kB shmem:416912kB slab_reclaimable:26848kB slab_unreclaimable:17508kB kernel_stack:1184kB pagetables:23240kB unstable:0kB bounce:0kB free_cma:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no
>lowmem_reserve[]: 0 0 478 478
>Normal free:22636kB min:16512kB low:20640kB high:24768kB active_anon:302600kB inactive_anon:28672kB active_file:604kB inactive_file:924kB unevictable:4kB isolated(anon):0kB isolated(file):0kB present:489888kB managed:424996kB mlocked:4kB dirty:92kB writeback:0kB mapped:32296kB shmem:84372kB slab_reclaimable:19300kB slab_unreclaimable:16912kB kernel_stack:1808kB pagetables:11512kB unstable:0kB bounce:0kB free_cma:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no
>lowmem_reserve[]: 0 0 0 0
>DMA: 1*4kB (U) 1*8kB (U) 1*16kB (U) 0*32kB 2*64kB (U) 1*128kB (U) 1*256kB (U) 0*512kB 1*1024kB (U) 1*2048kB (U) 3*4096kB (MR) = 15900kB
>DMA32: 4549*4kB (UEM) 4145*8kB (UEM) 4811*16kB (UEM) 3143*32kB (UEM) 1581*64kB (UEM) 587*128kB (UEM) 212*256kB (UEM) 29*512kB (UEM) 4*1024kB (UM) 0*2048kB 0*4096kB = 478444kB
>Normal: 953*4kB (UEM) 848*8kB (UEM) 423*16kB (UEM) 75*32kB (UEM) 0*64kB 6*128kB (E) 2*256kB (E) 0*512kB 0*1024kB 1*2048kB (R) 0*4096kB = 23092kB
>308067 total pagecache pages
>0 pages in swap cache
>Swap cache stats: add 0, delete 0, find 0/0
>Free swap  = 0kB
>Total swap = 0kB
>1041904 pages RAM
>60024 pages reserved
>1344329 pages shared
>667265 pages non-shared
>cp: page allocation failure: order:9, mode:0x1040d0
>Pid: 22037, comm: cp Not tainted 3.8.0-rc3 #1
>Call Trace:
> [<ffffffff810b6a9e>] warn_alloc_failed+0x108/0x11d
> [<ffffffff810b8507>] ? drain_local_pages+0x11/0x13
> [<ffffffff810b99b7>] __alloc_pages_nodemask+0x769/0x7fc
> [<ffffffff810b9ac5>] __get_free_pages+0x12/0x41
> [<ffffffff810e6013>] kmalloc_order_trace+0x2e/0x83
> [<ffffffff810e7798>] __kmalloc+0x36/0x12e
> [<ffffffff810b89db>] ? __free_memcg_kmem_pages+0x9/0xb
> [<ffffffff81109c9c>] seq_read+0x1e9/0x353
> [<ffffffff810ef140>] vfs_read+0xad/0x129
> [<ffffffff810ef20b>] sys_read+0x4f/0x79
> [<ffffffff8149a752>] system_call_fastpath+0x16/0x1b
>Mem-Info:
>DMA per-cpu:
>CPU    0: hi:    0, btch:   1 usd:   0
>CPU    1: hi:    0, btch:   1 usd:   0
>CPU    2: hi:    0, btch:   1 usd:   0
>CPU    3: hi:    0, btch:   1 usd:   0
>DMA32 per-cpu:
>CPU    0: hi:  186, btch:  31 usd:   0
>CPU    1: hi:  186, btch:  31 usd:   0
>CPU    2: hi:  186, btch:  31 usd:   0
>CPU    3: hi:  186, btch:  31 usd:   0
>Normal per-cpu:
>CPU    0: hi:  186, btch:  31 usd:   0
>CPU    1: hi:  186, btch:  31 usd:   0
>CPU    2: hi:  186, btch:  31 usd:   0
>CPU    3: hi:  186, btch:  31 usd:   0
>active_anon:560184 inactive_anon:60102 isolated_anon:0
> active_file:58765 inactive_file:123808 isolated_file:0
> unevictable:1 dirty:389 writeback:0 unstable:0
> free:130066 slab_reclaimable:11537 slab_unreclaimable:8518
> mapped:108590 shmem:125321 pagetables:8687 bounce:0
> free_cma:0
>DMA free:15900kB min:524kB low:652kB high:784kB active_anon:0kB inactive_anon:0kB active_file:0kB inactive_file:0kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:15644kB managed:15900kB mlocked:0kB dirty:0kB writeback:0kB mapped:0kB shmem:0kB slab_reclaimable:0kB slab_unreclaimable:0kB kernel_stack:0kB pagetables:0kB unstable:0kB bounce:0kB free_cma:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? yes
>lowmem_reserve[]: 0 3422 3900 3900
>DMA32 free:480688kB min:118124kB low:147652kB high:177184kB active_anon:1933040kB inactive_anon:216468kB active_file:234432kB inactive_file:495152kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:3504436kB managed:3482280kB mlocked:0kB dirty:1464kB writeback:0kB mapped:402064kB shmem:416792kB slab_reclaimable:26848kB slab_unreclaimable:17160kB kernel_stack:1184kB pagetables:23236kB unstable:0kB bounce:0kB free_cma:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no
>lowmem_reserve[]: 0 0 478 478
>Normal free:23676kB min:16512kB low:20640kB high:24768kB active_anon:307696kB inactive_anon:23940kB active_file:628kB inactive_file:80kB unevictable:4kB isolated(anon):0kB isolated(file):0kB present:489888kB managed:424996kB mlocked:4kB dirty:92kB writeback:0kB mapped:32296kB shmem:84492kB slab_reclaimable:19300kB slab_unreclaimable:16912kB kernel_stack:1808kB pagetables:11512kB unstable:0kB bounce:0kB free_cma:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no
>lowmem_reserve[]: 0 0 0 0
>DMA: 1*4kB (U) 1*8kB (U) 1*16kB (U) 0*32kB 2*64kB (U) 1*128kB (U) 1*256kB (U) 0*512kB 1*1024kB (U) 1*2048kB (U) 3*4096kB (MR) = 15900kB
>DMA32: 4897*4kB (UEM) 4247*8kB (UEM) 4823*16kB (UEM) 3147*32kB (UEM) 1581*64kB (UEM) 587*128kB (UEM) 212*256kB (UEM) 29*512kB (UEM) 4*1024kB (UM) 0*2048kB 0*4096kB = 480972kB
>Normal: 1174*4kB (UEM) 879*8kB (UEM) 431*16kB (UEM) 76*32kB (UM) 0*64kB 6*128kB (UE) 2*256kB (E) 0*512kB 0*1024kB 1*2048kB (R) 0*4096kB = 24384kB
>307706 total pagecache pages
>0 pages in swap cache
>Swap cache stats: add 0, delete 0, find 0/0
>Free swap  = 0kB
>Total swap = 0kB
>1041904 pages RAM
>60024 pages reserved
>1324062 pages shared
>683152 pages non-shared
>cfg80211: Calling CRDA to update world regulatory domain
>cfg80211: World regulatory domain updated:
>cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>wlan0: authenticate with 64:d9:89:c4:58:e0
>wlan0: send auth to 64:d9:89:c4:58:e0 (try 1/3)
>wlan0: authenticated
>wlan0: waiting for beacon from 64:d9:89:c4:58:e0
>wlan0: associate with 64:d9:89:c4:58:e0 (try 1/3)
>wlan0: RX AssocResp from 64:d9:89:c4:58:e0 (capab=0x431 status=0 aid=7)
>wlan0: associated
>cfg80211: Calling CRDA for country: SK
>cfg80211: Regulatory domain changed to country: SK
>cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>wlan0: authenticate with e8:ba:70:92:60:4f
>wlan0: send auth to e8:ba:70:92:60:4f (try 1/3)
>wlan0: send auth to e8:ba:70:92:60:4f (try 2/3)
>wlan0: authenticated
>wlan0: associate with e8:ba:70:92:60:4f (try 1/3)
>wlan0: RX AssocResp from e8:ba:70:92:60:4f (capab=0x111 status=0 aid=1)
>wlan0: associated

Actions: View

Attachments on bug 59986: 73793 | 73794

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.